Craftsman Tools - John Day Company

Transcription

Tool Storage
Craftsman Tools
Phone: 402-455-6151
Toll Free: 800-488-9699
319
Tool Storage
Craftsman Tools
Ball Bearing Tool Chests & Carts
Ball Bearing 56-Inch Wide Professional
10-Drawer Tool Chest/13-Drawer Tool Cart
Tool Chest:
Provides 26,518 cu. in. of storage. Powder coat finish, GRIPLATCH™
drawer detent system, pivot locking system, full-extension drawers with ballbearing drawer slides, interchangeable modular drawers, two gas struts
support open till cover, channel supports on bottom, includes non-slip drawer
liners and six aluminum drawer dividers (customer installed). All drawers are
233¼8"W x 27"D. Four drawers are 2"H, four are 31¼8"H, two are 41¼8"H.
Unit measures 56"W x 30"D x 241¼2"H.
Tool Cart:
Provides 39,929 cu. in. of storage and features internal cage design. Powder
coat finish, GRIPLATCH™ drawer detent system, pivot locking system, fullextension drawers with ball-bearing drawer slides, interchangeable modular
drawers, four tubular steel handles, six 6" x 2" heavy-duty casters (three rigid,
three swivel), 1¼2" thick hardboard reversible top worksurface, non-slip
drawer liners and eight aluminum drawer dividers included (customer
installed). 3,600 lb. load rating. One drawer is 513¼8"W x 271¼2"D x
41¼8"H, all others are 233¼8"W x 271¼2"D. Two are 2"H, four are
31¼8"H, four are 41¼8"H and two are 81¼2"H. Unit measures 56"W x 30"D
x 421¼2"H with casters.
PartNo
CRAFT 9-65553
CRAFT 9-65550
CRAFT 9-65554
CRAFT 9-65552
Description
CHST TOP DBL 10DRW PRO RED
CHST TOP DBL 10DR 56PRO BLK
CAB ROLL DBL 13DR 56PRO RED
CAB ROLL DBL 13DR 56PRO BLK
W.t Lbs.
468
468
611
611
Heavy-Duty Ball-Bearing Storage Featuring Our Patented GRIPLATCH™
Drawer Detent System. Heavy gauge steel construction. Rounded full-width
aluminum drawer pulls. Quick release ball-bearing design provides easy
drawer removal. Internal locking system with reversible overmolded keys.
GRIPLATCH™ detent system secures drawers in place and prevents
unintentional opening.
Chests Feature:
Removable tote tray. Heavy-duty side handles. Craftsman emboss in cover.
Full width cover hinge. Cover link(s) to support open lids. Independently
locking security drawer.
Roll-Aways and Mobile Tool Carts Feature:
Exclusive I-Frame construction that withstands 50% more stress than flatsided models. 5" x 2" casters with reinforcing channels allow 30% more load,
up to 1,000 lbs. Enhanced tubular side handles.
PartNo
CRAFT 9-59729
CRAFT 9-59629
CRAFT 9-59731
CRAFT 9-59631
Description
CHST TOP DBL 9DRW 52 RED
CHST TOP DBL 9DRW 52 BLK
CAB ROLL DBL 14DRW 52 RED
CAB ROLL DBL 14DRW 52 BLK
Made in the U.S.A.
(Ask your JDC Representative
for Warranty Guidelines)
Visit Us At
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
800-488-9699
320
W.t Lbs.
190
190
345
345
Tool Storage
7-Drawer Tool Cart
Intermediate Chest
Cart Features:
Provides 24,006 cu. in. of storage and features internal cage design. Powdercoat finish, GRIPLATCH™ drawer detent system, pivot locking system, fullextension drawers with ball-bearing drawer slides, interchangeable modular
drawers, four tubular steel side handles, four 6-in. x 2-in. heavy duty casters
(two rigid, two swivel), 1/2-in. thick hardboard reversible top worksurface,
non-slip drawer liners and six aluminum drawer dividers included (customer
installed). 2,400 lb. load rating. All drawers are 211/2" deep. One drawer is
417/8"W x 41/8"H, one is 233/8"W x 2"H, two are 233/8"W x 31/8"H, two
are 233/8"W x 41/8"H, one is 233/8"W x 81/2"H, one is 143/8"W x 2"H, two
are 143/8"W x 31/8"H, two are 143/8"W x 41/8"H and one is 143/8"H x
81/2"H. Unit measures 46"W x 24"D x 421/2"H with casters.
PartNo
CRAFT 9-65577
CRAFT 9-65575
CRAFT 9-65578
CRAFT 9-65576
Description
CHST TOP DBL 10DR 46PRO RED
CHST TOP DBL 10DR 46PRO BLK
CAB ROLL DBL 13DR 46PRO RED
CAB ROLL DBL 13DR 46PRO BLK
PartNo
CRAFT 9-59704
CRAFT 9-59604
Description
CHST INTM 1DRW 40 RED
CHST INTM 1DRW 40 BLK
Ball Bearing 40" Wide 4-Drawer Tool
Chest/6-Drawer Tool Cart
W.t Lbs.
52
52
W.t Lbs.
340
340
431
431
Chest Features:
Cart Features:
up to 1,000 lbs. Enhanced tubular side handles.
For Additional Product Information
Call Industrial Sales at
800-488-9699 or visit
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
Fits between any 40" wide chest and mobile tool cart.
321
PartNo
CRAFT 9-59725
CRAFT 9-59625
CRAFT 9-59726
CRAFT 9-59626
Description
CHST TOP SNG 4DRW 40 RED
CHST TOP SNG 4DRW 40 BLK
CAB ROLL SNG 6DRW 40 RED
CAB ROLL SNG 6DRW 40 BLK
W.t Lbs.
141
141
240
240
Craftsman Tools
drawers, four tubular steel side handles, four 6" x 2" heavy duty casters
(two rigid, two swivel), 1¼2" thick hardboard reversible top worksurface, nonslip drawer liners, and six aluminum drawer dividers included (customer
installed). 2,400 lb. load rating.
Chest Features:
All drawers are 211¼2" deep. One drawer is 417¼8"W x 41¼8"H, one is
Provides 16,915 cu. in. of storage. Powder-coat finish, GRIPLATCH™
233¼8"W x 2"H, two are 233¼8"W x 31¼8"H, two are 233¼8"W x 41¼8"H
drawer detent system, pivot locking system, full-extension drawers with ball- and one is 233¼8"W x 81¼2"H. Unit measures 46"W x 24"D x 421¼2"H
bearing drawer slides, interchangeable modular drawers, two gas struts
with casters.
support open till cover, channel supports on bottom, includes non-slip drawer PartNo
Description
W.t Lbs.
liners and six aluminum drawer dividers (customer installed). All drawers are CRAFT 9-65580
CAB ROLL SNG 7DR 46 PRO RED
405
CAB ROLL SNG 7DR 46 PRO BLK
405
211¼2" deep. Two drawers are 233¼8"W x 2"H, two are 233/8"W x 31/8"H, CRAFT 9-65579
one is 233/8"W x 41/8"H, two are 143/8"W x 2"H, two are 143/8"W x 31/8"H Ball Bearing 40-Inch Wide 1-Drawer
and one is 143/8"W x 41/8"H. Unit measures 46"W x 24"D x 41/2"H.
Tool Storage
Chests Feature:
Full width bottom drawer and independently locking security drawer.
Carts Features:
Full width top drawer. Exclusive I-Frame construction that withstands 50%
more stress than flat-sided models. 5" x 2" casters with reinforcing channels
allow 30% more load, up to 1,000 lbs. Enhanced tubular side handles.
Chest Features:
Provides 12,035 cu. in. of storage. Powder-coat finish, GRIPLATCH™
drawer detent system, pivot locking system, full-extension drawers with ballbearing drawer slides, interchangeable modular drawers, two gas struts
support open till cover, channel supports on bottom, includes non-slip drawer
liners and four full-width aluminum drawer dividers (customer installed). All
drawers are 317/8"W x 181/2"D. Two drawers are 2"H, Two are 31/8"H, one
is 41/8"H. Unit measures 36"W x 21"D x 241/2"H.
Craftsman Tools
Ball Bearing 40" Wide 7-Drawer Tool
PartNo
CRAFT 9-59721
CRAFT 9-59621
CRAFT 9-59722
CRAFT 9-59622
Description
Ball Bearing 40-Inch Wide 8-Drawer Tool
Chest/14-Drawer Mobile Tool Cart
W.t Lbs.
141
141
275
275
Cart Features:
drawers, four tubular steel side handles, four 6" x 2" heavy duty casters (two
rigid, two swivel), 1/2" thick hardboard reversible top worksurface, non-slip
drawer liners, and six aluminum drawer dividers included (customer
installed). 2,400 lb. load rating. All drawers are 317/8"W x 181/2"D. One
drawer is 2"H, two are 31/8"H, three are 41/8"H and one is 81/2"H. Unit
measures 36"W x 21"D x 421/2"H with casters.
PartNo
CRAFT 9-65565
CRAFT 9-65563
CRAFT 9-65566
CRAFT 9-65564
Description
CHST TOP SNG 5DR 36 PRO RED
CHST TOP SNG 5DR 36 PRO BLK
CAB ROLL SNG 5DR 36 PRO RED
CAB ROLL SNG 5DR 36 PRO BLK
Chest Features:
Independently locking security drawer. Removable tote tray. Heavy-duty side
handles. Craftsman emboss in cover. Full width cover hinge. Cover link(s) to
support open lids. Independently locking security drawer.
Cart Features:
up to 1,000 lbs. Enhanced tubular side handles. (Side Locker Sold Separately)
PartNo
CRAFT 9-59723
CRAFT 9-59623
CRAFT 9-59724
CRAFT 9-59624
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
141
141
260
260
322
Hand Tools That
Yield the Results
You Demand!
W.t Lbs.
210
210
308
308
Tool Storage
Ball Bearing - 26-Inch Wide, Deep 6-Drawer
Chest/8-Drawer Roll-Away
Ball Bearing 26-Inch Wide 5-Drawer
PartNo
CRAFT 9-59714
CRAFT 9-59614
CRAFT 9-59715
CRAFT 9-59615
Description
Ball Bearing 26-Inch Wide 6-Drawer
W.t Lbs.
83.5
83.5
125
125
Craftsman Ball-Bearing Chests feature tote tray, ball bearing drawer slides,
cover stay and aluminum side handles. Overall Size: 26x16x19 3/4"
Drawers: 5 - 22 3/8"x14 5/8"x2", 1 - 22 3/8"x14 5/8"x3 1/8"
Craftsman Ball-Bearing Rollaways feature 5" x 2" casters, ball bearing
drawer slides, tubular steel side handle, 14 gauge caster channels. Overall
Size: 26 1/2x18x41 1/4"
Drawers: 1 - 22 3/8"x16 1/2"x2", 2 - 22 3/8"x16 1/2"x3 1/8", 1 - 22 3/8"x16
1/2"x4 1/8"
1 - 22 3/8"x16 1/2"x6 3/8"
PartNo
CRAFT 9-59716
CRAFT 9-59616
CRAFT 9-59717
CRAFT 9-59617
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
90
90
138
138
323
PartNo
CRAFT 9-59718
CRAFT 9-59618
CRAFT 9-59719
CRAFT 9-59619
Description
W.t Lbs.
138
138
160
160
Ball Bearing Add-On Units and Long Distance
Carts
Ball Bearing 41/2’ High 4-Drawer Side Locker
Mounts on either side of any 40" or 52" Chest and Mobile Tool Cart
combination for an additional 10,872 cu. in. storage. Features 4
interchangeable 113/4"W x 161/2"D x 31/8"H ball-bearing drawers that can
be repositioned for versatility. Locking door mounts on either side of locker.
Includes hook for hanging garments or equipment. 16"W x 18"D x 545/8"H.
(Chest and Cart sold separately)
PartNo
CRAFT 9-59605
CRAFT 9-59705
Description
CAB/LCKR SD 4DRW 16 BLK
CAB/LCKR SD 4DRW 16 RED
W.t Lbs.
102
102
Craftsman Tools
cover stay and aluminum side handles. Overall Size: 26x16x19 3/4
Drawers: 2 - 22 3/8"x14 5/8"x2", 3 - 22 3/8"x14 5/8"x3 1/8"
Size: 26 1/2x18x35"
Drawers: 1 - 22 3/8"x16 1/2"x2", 2 - 22 3/8"x16 1/2"x3 1/8", 2 - 22 3/8"x16
1/2"x4 1/8",
1 - 22 3/8"x16 1/2"x6 3/8"
cover stay and aluminum side handles. Overall Size: 26x17 3/4x19 3/4"
Drawers: 5 - 22 3/8"x16 3/8"x2", 1 - 22 3/8"x16 3/8"x3 1/8"
Size: 26 1/2x18x41 1/4"
Drawers: 2 - 22 3/8"x16 1/2"x2", 2 - 22 3/8"x16 1/2"x3 1/8", 3 - 22 3/8"x16
1/2"x4 1/8"
1 - 22 3/8"x16 1/2"x6 3/8"
Craftsman Tools
Tool Storage
Ball Bearing Add-On Units and Long Distance
Carts
Ball Bearing -12-Drawer “Long Distance” Tool
Cart
Craftsman “Long Distance” Tool Carts. Tested to go over 300 miles in day-today factory use. Feature Roll-Cage Construction, flat sides and back, triple
wall bottom construction, double wall top construction, and GRIPLATCH™
drawer detent system. Welded nut caster attachment. 20" front to back for a
larger 40" x 20" worksurface. Ball bearing drawer slides, 5" x 2" casters, 1/2"
hardboard worksurface and tubular steel side handle. Overall Size: 40
3/4x20x41 1/4"
Drawers: 6 - 22 3/8"X16 1/2"X3 1/8", 1 - 22 3/8"X16 1/2"X4 1/8", 1 - 22
3/8"X16 1/2"X6 3/8"
4 - 11 3/4"X16 1/2"X3 1/8". 1 - 11 3/4"X16 1/2"X4 1/8", 1 - 11 3/4"X16
1/2"X12 3/4"
PartNo
CRAFT 9-59728
CRAFT 9-59727
Description
Side Locker/Cabinet Full-Height
Provides 13,582 cu. in. of storage. Powder coat finish. Stores larger, bulkier
items. Four pullout drawers feature ball-bearing slides, can be removed or
repositioned to meet your needs. Hang bar allows you to hang coats or work
clothes in the unit. Door features a pegboard design for hanging tools. Can
mount on either side of any Craftsman Professional combination. Four
drawers are all 143¼8"W x 181¼2"D x 31¼16"H. Measures 181¼2"W x
21"D x 591¼4"H overall.
PartNo
CRAFT 9-65510
CRAFT 9-65509
Description
CAB/LCKR SD 4DRW 18 PRO RED
CAB/LCKR SD 4DRW 18 PRO BLK
Ball Bearing Professional 7-Drawer Side
Cabinet
W.t Lbs.
164
164
W.t Lbs.
280
280
Ball-Bearing 6-Drawer Side Cabinet
Provides 5,649 cu. in. of storage. Heavy gauge mounting bracket included to
allow unit to be added to either side of a roll-away. All drawers are 113/4"W
x 161/2"D; four are 31/8"H, one is 41/8"H, one is 123/4"H. Unit measures
153/4"W x 18"D x 351/4"H overall.
PartNo
CRAFT 9-59702
CRAFT 9-59602
Description
CAB SD 6DRW 15 RED
CAB SD 6DRW 15 BLK
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
95.5
95.5
324
Standard Storage…Heavy-duty Storage Featuring Compound Action Drawer
Slides! Heavy gauge steel construction. Rounded full-width aluminum drawer
pulls. Compound action drawer slides. Internal locking system with reversible
over-molded keys.
Chests Feature:
Removable tote tray. Heavy-duty side handles. Full width cover hinge. Cover
links to support open lids. Independently locking security drawer.
Mobile Tool Carts Feature:
Exclusive I-Frame® construction that is stronger than Craftsman® flat sided
models. 1/2" thick reversible hardboard work surface. Specialty tops
available. 5" x 2" casters with reinforcing angles support up to 750 lbs.
Tubular side handles. 1 - 11 3/4x14 5/8x5 1/4.
Exclusive I-Frame® construction that withstands 50% more stress than flatsided models. 1/2" thick reversible hardboard work surface. Specialty tops
available. See page 20 for details. 5" x 2" casters with reinforcing angles
support up to 750 lbs. Tubular side handles.
Overall Size: 40 3/4 x 18 x 41 1/2
Drawers:
6 - 22 3/8x16 1/2x3 1/8, 1 - 22 3/8x16 1/2x4 1/8, 1 - 22 3/8x16 1/2x6 3/8, 4 11 3/4x16 1/2x3 1/8
1 - 11 3/4x16 1/2x4 1/8, 1 - 11 3/4x16 1/2x12 3/4.
PartNo
CRAFT 9-65516
CRAFT 9-65517
Description
CAB SD 7DRW 18 PRO RED
CAB SD 7DRW 18 PRO BLK
W.t Lbs.
152
152
Tool Storage
Standard Units - 52" & 40" Wide 9-Drawer Tool
Standard Tool Chests & Carts
Standard Units - 40" Wide 8-Drawer Tool
Craftsman Tools
Slides! Heavy gauge steel construction. Rounded full-width aluminum
drawer pulls. Compound action drawer slides. Internal locking system with
reversible over-molded keys.
Chests Feature:
links to support open lids. Overall Size: 52 x 16 x 19 3/.
Standard Storage…Heavy-duty Storage Featuring Compound Action Drawer Drawers: 4 - 22 3/8x14 5/8x2, 2 - 22 3/8x14 5/8x3 1/8, 3 - 22 3/8x14 5/8x4
Slides! Heavy gauge steel construction. Rounded full-width aluminum drawer
pulls. Compound action drawer slides. Internal locking system with reversible Mobile Tool Carts Feature:
Exclusive I-Frame® construction that withstands 50% more stress than flatover-molded keys.
sided models. 1/2" thick reversible hardboard work surface. Specialty tops
Chests Feature:
Removable tote tray. Heavy-duty side handles. Full width cover hinge. Cover available. 5" x 2" casters with reinforcing angles support up to 750 lbs.
Tubular side handles.
Overall Size: 52 x 18 x 41 1/2.
Overall Size: 40 1/2 x 16 x 19 3/4
Drawers: 4 - 22 3/8x16 5/8x2, 4 - 22 3/8x16 5/8x3 1/8, 3 - 22 3/8x16 5/8x4
1/8, 1 - 22 3/8x16 5/8x6 3/8. 2 - 22 3/8x16 5/8x9 1/2.
Drawers:
PartNo
Description
W.t Lbs.
3 - 22 3/8x14 5/8x2, 1 - 22 3/8x14 5/8x3 1/8, 1 - 22 3/8x1 5/8x4 1/8, 2 - 11
CRAFT 9-65512
118
3/4x14 5/8x4 1/8, 1 - 11 3/4x14 5/8x4 1/4.
CRAFT 9-65513
201
Exclusive I-Frame® construction that is stronger than Craftsman® flat sided
models. 1/2" thick reversible hardboard work surface. Specialty tops
Tubular side handles. 1 - 11 3/4x14 5/8x5 1/4.
Tubular side handles.
Overall Size: 40 3/4 x 18 x 41 1/2
Drawers:
6 - 22 3/8x16 1/2x3 1/8, 1 - 22 3/8x16 1/2x4 1/8, 1 - 22 3/8x16 1/2x4 3/8, 4 11 3/4x16 1/2x3 1/8, 1 - 11 3/4x16 1/2x4 1/8, 1 - 11 3/4x16 1/2x12 3/4.
PartNo
CRAFT 9-65920
CRAFT 9-65921
Description
W.t Lbs.
115
243
800-488-9699
Phone: 402-455-6151
Toll Free: 800-488-9699
325
John Day Company
Surround yourself
with quality!
Tool Storage
Craftsman Tools
Chests Feature:
Overall Size: 40 1/2 x 16 x 20 5/8.
Drawers: 1 - 36 3/4x14 5/8x4 1/8, 3 - 22 3/8x14 5/8x2, 1 - 22 3/8x14 5/8x3
Chests Feature:
Removable tote tray. Heavy-duty side handles. Full width cover hinge. Cover 1/8, 1 - 11 3/4x14 5/8x4 1/8,
1 - 11 3/4x14 5/8x5 1/4.
Overall Size: 40 1/2 x 16 x 20 5/8.
Drawers: 1 - 36 3/4x14 5/8x4 1/8, 3 - 22 3/8x14 5/8x2, 1 - 22 3/8x14 5/8x3
Exclusive I-Frame® construction that withstands 50% more stress than flat1/8, 1 - 11 3/4x14 5/8x4 1/8, 1 - 11 3/4x14 5/8x5 1/4.
sided models. 1/2" thick reversible hardboard work surface. Specialty tops
available. See page 20 for details.. 5" x 2" casters with reinforcing angles
Overall Size: 40 3/4 x 18 x 41 1/2.
Drawers: 1 - 36 3/4x16 1/2x4 1/8, 4 - 22 3/8x16 1/2x2, 1 - 22 3/8x16 1/2x3
1/8, 2 - 22 3/8x16 1/2x6 3/8,
1 - 11 3/4x16 1/2x2, 3 - 11 3/4x16 1/2x3 1/8, 1 - 11 3/4x16 1/2x12 3/4.
PartNo
CRAFT 9-65348
CRAFT 9-65349
Description
W.t Lbs.
115
243
Your Midwest
Distributor for
over 96 Years
Phone: 402-455-6151
Toll Free: 800-488-9699
available. See page 20 for details. 5" x 2" casters with reinforcing angles
Overall Size: 40 3/4 x 18 x 41 1/2.
Drawers: 1 - 36 3/4x16 1/2x4 1/8, 4 - 22 3/8x16 1/2x2, 1 - 22 3/8x16 1/2x3
1/8, 2 - 22 3/8x16 1/2x6 3/8,
1 - 11 3/4x16 1/2x2, 3 - 11 3/4x16 1/2x3 1/8, 1 - 11 3/4x16 1/2x12 3/4.
PartNo
CRAFT 9-65323
CRAFT 9-65343
Description
W.t Lbs.
90
200
Standard Units 26" Wide 12" Deep, 4-Drawer
Intermediate Chest
Has 1,929 cu. in. of storage space. Drawers are 223/8"W x 103/4"D x 2"H.
Measures 261/2"W x 12"D x 121/4"H overall. Fits on roll-a-ways and under
all 12"D chests.
PartNo
CRAFT 9-65029
326
Description
CHST INTM 4DRW 26
W.t Lbs.
38.8
Tool Storage
Standard Units 26" Wide 11-Drawer Roll-Away
Standard Units 16" Deep, 4-Drawer
Intermediate Chest
PartNo
CRAFT 9-65144
Description
CHST INTM 4DRW 26
Standard Units 18" Deep, 3-Drawer
Intermediate Chest
W.t Lbs.
51.4
Has 3,394 cu. in. of storage space. Extra deep to accommodate more tools.
Fits between roll-aways and chests. Drawers are 223/8"W x 163/8"D; one is
2"H, one is 31/8", one is 41/8"H. Measures 261/2"W x 18"D x 131/4"H
overall.
PartNo
CRAFT 9-65030
Description
CHST INTM 3DRW 26
W.t Lbs.
54
PartNo
CRAFT 9-65362
Description
Standard Units 26" Wide 12-Drawer Chest
Craftsman® Chest Storage
Keyed Locks. Cover Stays. Aluminum Handles.
Drawers: 9 - 6 3/4"x10 3/4"x2", 2 - 22 3/8"x10 3/4"x2", 1 - 22 3/8"x10 3/4"x3
1/8"
PartNo
CRAFT 9-65261
CRAFT 9-65352
CRAFT 9-65912
Description
Made in the U.S.A.
Log-on to www.johnday.com
For Pricing and Product Information
800-488-9699
Phone: 402-455-6151
Toll Free: 800-488-9699
327
W.t Lbs.
149.2
W.t Lbs.
72
98.6
95.4
Craftsman Tools
Has 2,755 cu. in. of storage space. Fits under all 12" and 16" chests and on all
roll-aways. Drawers are 223/8"W x 141/2"D; three are 2"H, one is 31/8"H.
Measures 261/2"W x 16"D x 131/4"H overall.
Craftsman® Roll-Away Storage I-Frame® construction that withstands 50%
more stress than conventional designs!
750-lb. load rating. Recess side push handle.
Drawers: 2 - 22 3/8"x16 1/2"x2", 2 - 22 3/8"x16 1/2"x3 1/8", 2 - 22 3/8"x16
1/2"x4 1/8", 1 - 22 3/8"x16 1/2"x6 3/8", 4 - 10 5/8"x16 1/2"x2".
Tool Storage
Craftsman Tools
Drawers: 2 - 22 3/8"x16 1/2"x3 1/8", 1 - 22 3/8"x16 1/2"x6 3/8".
PartNo
CRAFT 9-65903
Description
W.t Lbs.
91.2
more stress than conventional designs! 750-lb. load rating. Recess side push
handle.
Drawers: 2 - 22 3/8"x16 1/2"x3 1/8", 1 - 22 3/8"x16 1/2"x4 1/8", 2 - 22
3/8"x16 1/2"x6 3/8".
PartNo
CRAFT 9-65200
Description
Drawers: 1 - 22 3/8"x16 1/2"x2", 2 - 22 3/8"x16 1/2"x3 1/8", 1 - 22 3/8"x16
1/2"x4 1/8", 1 - 22 3/8"x16 1/2"x6 3/8".
PartNo
CRAFT 9-65201
Description
CAB ROLL SNG 5DRW 26 RED W/SHF
W.t Lbs.
124.5
Keyed Locks. Cover Stays. Aluminum Handles
Drawers: 5 - 22 3/8"x10 3/4"x2", 1 - 22 3/8"x10 3/4"x3 1/8.
PartNo
CRAFT 9-65246
CRAFT 9-65247
Description
W.t Lbs.
65.7
55.2
W.t Lbs.
108
For Technical Advice Contact a
John Day Company Representative
at 800-488-9699.
Call John Day Company at
800-488-9699 for your
Tool Crib Management and
Vending Solutions
Phone: 402-455-6151
Toll Free: 800-488-9699
w/Folding Shelf
328
Tool Storage
Craftsman Tools
Drawers: 4 - 22 3/8"x16 1/2"x3 1/8", 1 - 22 3/8"x16 1/2"x4 1/8", 1 - 22
3/8"x16 1/2"x6 3/8".
PartNo
CRAFT 9-65202
Description
W.t Lbs.
112
Drawers: 3 - 6 3/4"x10 3/4"x2", 4 - 22 3/8"x10 3/4"x2", 1 - 22 3/8"x10 3/4"x3
1/8".
PartNo
CRAFT 9-65248
Description
W.t Lbs.
67.3
w/Folding Shelf
Standard Units 26" Wide 7-Drawer Extra Deep
Chest
Drawers: 2 - 22 3/8"x16 1/2"x2", 2 - 22 3/8"x16 1/2"x3 1/8", 3 - 22 3/8"x16
1/2"x4 1/8", 1 - 22 3/8"x16 1/2"x6 3/8".
Drawers: 4 - 223/8"x16 3/8"x2", 1 - 223/8"x16 3/8"x3 1/8", 2 - 105/8"x16
3/8"x2".
PartNo
CRAFT 9-65885
Description
CHST TOP SNG 7DR 26 RED XDP
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
101
329
PartNo
CRAFT 9-65913
Description
CAB ROLL SNG 8DRW 26 RED W/SHF
Visit Us At
www.johnday.com
W.t Lbs.
145.5
Tool Storage
Craftsman Tools
Drawers: 1 - 22 3/8"x16 1/2"x2", 2 - 22 3/8"x16 1/2"x3 1/8", 1 - 22 3/8"x16
1/2"x4 1/8, 2 - 22 3/8"x16 1/2"x6 3/8", 2 - 10 5/8"x16 1/2"x2", 1 - 10 5/8"x16
1/2"x4 1/8".
PartNo
CRAFT 9-65225
Description
Side Cabinet 6 Drawer
Has 5,649 cu. in. of storage overall. Tumbler lock and internal drawer locking
system. Two keys and mounting brackets included. Drawers fully extend for
complete accessibility. Drawers are 113/4"W x 161/2"D; four are 31/8"H, one
is 41/8"H, one is 123/4"H. Measures 153/4"W x 18"D x 351/4"H overall. Can
be mounted to either side of a roll-away. Not for use on 9-65200, 9-65202, 965903.
PartNo
CRAFT 9-65022
Description
CAB SD 6DRW 15-3/4
W.t Lbs.
77
Tool Caddy 6-Drawer
W.t Lbs.
142
Side Cabinets and Shelves
Side Cabinet 4 Drawer
Has 868 cu.in. of storage space. Caddy attaches to either side of roll-a-way.
Tumbler lock, two keys. Overall size 77/8"W x 12"D x 151/8"H. Drawers are
Has one shelf and total 4,070 cu. in. of storage. Tumbler lock door for
security. Two keys and mounting brackets included. Drawers fully extend for 63/4"W x 103/4"D x 2"H.
complete accessibility. Drawers are 133/4"W x 91/2"D x 23/4"H. Measures
PartNo
Description
W.t Lbs.
CHST SD 6DRW 7-7/8 CADDY
23.5
173/4"W x 101/2"D x 291/4"H overall. Can be mounted to either side of a roll- CRAFT 9-65142
away.
Steel Folding Side Shelf
PartNo
CRAFT 9-65027
Description
CAB SD 4DRW 17-3/4 RED
W.t Lbs.
46
Made in the U.S.A.
Overall 173/4"W x 151/2"D x 14"H extended, 3/8" lip on edge. Will fit all
Craftsman roll-a-ways.
PartNo
CRAFT 9-65213
CRAFT 9-65413
800-488-9699
Phone: 402-455-6151
Toll Free: 800-488-9699
330
Description
CAB SHLF 17-3/4 RED
CAB SHLF 17-3/4 BLK
W.t Lbs.
10
10
Tool Storage
Tool Storage
Has 4,956 cubic inches of storage space. Mounts to roll-away or bolts to flat
surface (bolts not included.) Overall 173/4"W x 101/2"D x 291/4"H, 2 steel
shelves adjustable at 3" increments. T-handle lock with two keys.
Machinist Features for the 12, 4, 6, 7 & 8 drawer chests include: Brown
Wrinkle Finish. Nylon Felt Drawer Liners. Full-Length Drawer Pulls. FullExtension Drawer Slides. Tumbler Lock with 2 Keys. Tote Tray In Chests.
Drawers: 9 - 6 7/8"x10 3/4"x2", 2 - 22 3/8"x10 3/4"x2", 1 - 22 3/8"x10 3/4"x3
1/8"
Side Cabinets and Shelves
Steel Hang-On Cabinet
Machinist Tool Storage
Chest 12-Drawer
Craftsman Tools
PartNo
CRAFT 9-65763
Description
CAB SD 17-3/4 RED
W.t Lbs.
38
Tool Sets
PartNo
CRAFT 9-65889
Description
CHST TOP SNG MACH 12DRW 26
Chest 4-Drawer Portable
W.t Lbs.
70.3
Drawers: 4 - 17 7/8"x7 1/2"x2 1/8"
PartNo
CRAFT 9-65229
Description
Chest 6-Drawer
W.t Lbs.
27.3
Made in the U.S.A.
800-488-9699
Drawers: 2 - 22 3/8"x10 3/4"x2", 1 - 22 3/8"x10 3/4"x3 1/8", 3 - 6 3/4"x10
3/4"x2"
PartNo
CRAFT 9-65087
Phone: 402-455-6151
Toll Free: 800-488-9699
331
Description
W.t Lbs.
58
Tool Storage
Project Centers
Work Center 5-Drawer
Drawers: 4 - 8 3/4"x7 1/2"x1 1/8", 1 - 8 3/4"x7 1/2"x2 1/4", 1 - 18 1/2"x7
1/2"x1 1/2", 1 - 18 1/2"x7 1/2"x2 1/4"
Craftsman® Professional Quality work Centers.
Durable plastic top with compartments for small parts, two cup holders and a
sliding hardboard worksurface with galvanized shell. Includes three long
metal dividers and six short plastic dividers, molded-in side handle on both
sides. 5" x 2" casters, full length aluminum drawer pulls, compound action
drawer slides and the exclusive I-Frame® construction. Keyed lock with two
keys. Sliding worksurface is securable with two padlocks (not included.)
Plastic bumpers to protect unit. Has 12,253 cubic inches of storage. Measures
33"W x 21"D x 463/4"H overall with top and casters.
Craftsman Tools
Machinist Tool Storage
Chest 7-Drawer
PartNo
CRAFT 9-65227
Description
Chest 8-Drawer
W.t Lbs.
30
PartNo
CRAFT 9-65454
CRAFT 9-65466
Description
WRK STATN ROLL 9DRW 33
W.t Lbs.
125.0
Cart 3 Drawer with lockable drawers
Drawers: 4 - 22 3/8"x10 3/4"x2", 1 - 22 3/8"x10 3/4"x3 1/8", 3 - 6 3/4"x10
3/4"x2"
PartNo
CRAFT 9-65377
Description
Machinists Roll-Away 9-Drawer
W.t Lbs.
67.2
Has 12,829 cu. in. of storage space and 3.0 sq. ft. of shelf and bottom storage.
Cart features full-length drawer pulls and 5" x 2" casters (2 rigid, 2 swivel
with brake). Three top drawers measure 223/8"W x 161/2"D x 2"H, two doors
close and secure bottom compartment. Right door has perforations to accept
hooks; left door has three inside shelves. Two locks and two keys. 261/2"W x
18"D x 411/2"H with casters.
Recessed side handles. I-Frame® construction withstands 50% more stress
than conventional designs. No drawer liners or tote trays. 41/2" x 11/2"
casters.
Drawers: 3 - 22 3/8"x16 1/2"x2", 4 - 22 3/8"x16 1/2"x3 1/8", 1 - 22 3/8"x16
1/2"x4 1/8", 1 - 22 3/8"x16 1/2"x6 3/8"
PartNo
CRAFT 9-65088
Description
CAB ROLL SNG MACH 9DRW 26
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
134
332
PartNo
CRAFT 9-65327
Description
CART 3DRW 2SHLF
800-488-9699
W.t Lbs.
105.5
Tool Storage
Tool Boxes and Totes
Chest 3-Drawer Plastic Portable
Full width 36 3/4"W x 16 1/2"D x 4 1/8"H easy-slide, ball bearing drawer is
positioned right below the worksurface…no more bending for your most used
tools. 48" wide industrial-strength top is at 363/4" work height. Top has builtin storage compartments on both sides and along the back. Molded-in
beverage holder, extension cord hook and push handles. 1/2" thick hardboard
worksurface measures 40" x 16". Additional storage compartments are located
under the wood top. Includes eight friction slide drawers; five are 22 3/8"W x
16 1/2"D (one is 2"H, three are 3 1/8"H and one is 6 3/8"H); three are 11
3/4"W x 16 1/2"D (one is 2"H, one is 3 1/8"H and one is 12 3/4"H). All steel
construction, with black enamel finish, has exclusive I-Frame® that is 50%
stronger than flat-sided models. Large, sturdy 5" x 2" casters (two with
brake). Overall measures 48"W x 22 1/4"D x 36 3/4"H with casters. 12,511
cu. in. of storage.
Durable chest features a high impact plastic shell and tough steel drawers.
Provides 1,788 cu. in. of storage. Top compartment for larger items, moldedin side handles and durable top handle, two metal latches, full-width
aluminum drawer trim. Three drawers are 17 7/8"W x 7 1/2"D x 2 1/8"H.
Overall measures 23"W x 13 3/8"D x 10 1/2"H.
Project Centers
Work Center 40" Wide, 9-Drawer
Craftsman Tools
PartNo
CRAFT 9-65590
Description
Ball-Bearing Project Center
W.t Lbs.
225.7
PartNo
CRAFT 9-65628
Description
HND BOX PLS PORT CHST 3DRW
W.t Lbs.
15.6
Hand Boxes Durable Plastic
PartNo
Description
CRAFT 9-65433
HND BOX PLS 23
CRAFT 9-65432
HND BOX PLS 20
CRAFT 9-65431
HND BOX PLS 17
Dimensio
ns In.
23 x 10
1/2 x 10
20 x 9 1/4
x9
17 x 9 1/4
x9
Cu. In.
W.t Lbs.
2415
5.5
1665
4.4
1415
3.3
Hand Box with Parts Storage
Side storage area that also acts as shock-absorbing bumper. Durable plastic
sides and bumper provide organization for longer, bulkier tools. Two plastic
storage bins mount to the sides or attach to the inside of any drawer. Pegboard
sides and hooks for even more storage. Four 5" x 2" casters. Provides 9,846
cu. in. of storage. All drawers feature smooth rolling, ball-bearing drawer
slides. All drawers are 223/8"W x 163/8"D; two are 31/8"H; two are 63/8"H;
one is 41/8"H. Overall 33"W x 21"D x 391/4"H with casters.
PartNo
CRAFT 9-65959
Description
WRK STATN ROLL 5DRW PLS
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
139.8
333
Has 2,132 cu. in. of storage space. Gray plastic tub with durable clear cover.
Divided parts storage in cover for small parts, bulk storage tub for larger
tools, and a black plastic tote tray. Comfort grip handle. Two metal latches for
added strength. Lockable with padlock (not included).
PartNo
CRAFT 9-65406
Description
HND BOX PLS W/CLEAR CVR
W.t Lbs.
7.3
Tool Storage
SST® With Caddy
Craftsman Tools
Portable Tool Boxes
PartNo
Description
CRAFT 9-59212
HND BOX STEL 20X8-1/2X9-1/2
CRAFT 9-59200
HND BOX STEEL 18X8X9
CRAFT 9-59214
HND BOX STEEL 16X7X7-1/2
CRAFT 9-59241
HND BOX STL 24-1/4X9-1/2
CRAFT 9-59216
HND BOX STL 30X8-1/2X9-1/2
CRAFT 9-59236
HND BOX STL CANTILEV
CRAFT 9-65427
CHST PORT 4DRW 20-1/2
CRAFT 9-65337
CRAFT 9-65333
CRAFT 9-65508
CHST PORT 3DRW W/TOP BINS
Dimensi
ons In.
20 x 8
1/2 x 9
1/2
18 x 8 x
9
16 x 7 x
7 1/2
24 1/4 x
9 1/2 x 9
1/2
30 x 8
1/2 x 9
1/2
18 x 10 x
13 1/4
20 1/2 x
8 1/2 x
14 1/4
20 1/2 x
8 1/2 x
12
20 1/2 x
8 1/2 x 9
1/2
20 3/4 x
8 3/4 x
13 1/2
Cu. In.
W.t Lbs.
1600
11.5
1301
10.0
822
5 .7
2169
20.5
2401
18.5
1129
20.2
1840
Center
Hasp
26.8
1558
Center
Hasp
19.4
1276
Center
Hasp
16.0
1644
Center
Hasp
23.5
Combines our popular SST and SST Caddy into one great package. Overall
26 1/4"W x 15 3/4"D x 16 3/4"H. SST remains fully functional even with
caddy.
PartNo
CRAFT 9-65125
CRAFT 9-65083
Description
HND BOX PLS SIT/STND GRY CD
HND BOX PLS SIT/STND YLW CD
W.t Lbs.
22.4
22.4
SST2® Sit/Stand/ Tote TRUCK
Professional 26" Wide Hand Box
Craftsman engineers have designed this plastic hand box from the ground up
with the professional in mind. Includes a huge tote tray with designated 2 ft
level storage compartment. Extra thick walls for long lasting performance.
Features include top and side handles for easy portability, removable small
parts box, two large metal drawbolt latches and full width hinge. Provides
2,730 cu. in. of storage. Measures 26"W x 101/2"D x 10"H.
PartNo
CRAFT 9-65426
Description
HND BOX PLS 26 PRO
W.t Lbs.
7.5
PartNo
CRAFT 9-59027
Visit Us At
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
Ideal for transporting tools, equipment, and more. Unique hand-truck design
makes the new SST2 a breeze to maneuver. Constructed of high-impact
polypropylene, the SST2 has a skid resistant surface allowing a standing
capacity of up to 350 pounds. Telescoping handle pulls out to a comfortable
pulling height of 37". Big 5-inch wheels for easy maneuvering even over
rough surfaces. Offers 5,081 cu. in. of storage including an available 10
inches of space in the bottom tub for bulk storage, 43/4"H tote tray with
handle for larger tools and accessories and a 2" H divided tote tray for small
tools and parts. Organizer and tote tray stack under lid. Comfortable top
handle for easy portability. Latches secure with padlocks, not included.
Capable of using elastic tie-downs, not included, for transporting items on
top. Measures 23 3/4"W x 17 3/4"D x 18 1/2"H.
334
Description
HND BOX PLS SIT/STND ROLL
W.t Lbs.
19.5
Tool Storage
Mix-N-Match Tops and Benches
Step Tool Box
Craftsman Tools
You can have the craftsman® workbench that works best for you. Tops mix
and match with bases. All benches have a heavy gauge steel frame with extra
wide legs, pegboard sides, and full-width aluminum drawer pulls.
Has 1,584 cu. in. of storage space. Matches the convenience of a tool box with Wood top - Hard beechwood top is 1" thick with two wood vises (1 front and
the durability of a step stool. Small parts bins, comfort grip handle, durable
1 end). Vises open to 81/2" maximum. Four clamping dogs help secure
tote tray, open till cover, can be used as a step stool and can support 250 lbs. workpiece. Top measures 603/4"W x 251/4"D x 21/2"H with vises and apron.
Overall 22"W x 12"D x 12"H. Made of polypropylene.
Provides over 10 sq. ft. of worksurface. Full-width tool pocket on back of top
catches shavings, etc. Mounting brackets included.
PartNo
Description
Steel top - Reinforced heavy steel for automotive applications. 10 sq. ft. of
CRAFT 9-65301
HND BOX PLS STEP
11.5
work area. Top has charcoal grey finish. Mounting brackets included.
Measures 60"W x 24"D x 21/2"H overall.
10-drawer steel workbench base - Provides 11,692 cu. in. of storage. All
drawers are 167/8"W x 153/4"D; four are 21/8"H; four are 43/8"H; and two
Workbenches
are 9"H. Measures 511/2"W x 18"D x 353/8"H overall.
9-drawer Ball Bearing workbench base - Offers 11,720 cu. in. of storage. All
drawers are 167/8"W x 153/4"D; two are 21/8"H; five are 43/8"H; and two
are 9"H. Measures 511/2"W x 18"D x 353/8"H overall.
PartNo
CRAFT 9-65547
CRAFT 9-65549
CRAFT 9-65418
CRAFT 9-65548
Craftsman 12-Drawer Workbench. Provides 11,608 cu.in. of storage. 54"W x
20"D x 11/2"H worksurface with rounded corners and banded edges. All
drawers are 167/8"W x 153/4"D; four drawers are 21/8"H, eight drawers are
43/8"H. Measures 54"W x 201/4"D x 34"H overall.
Craftsman® 7-drawer Workbench. Provides 16,779 cu. in. of storage, the
extra-wide 72"W x 30"D top has rounded corners and banded edges. Steel
base with two supporting center legs has leveling feet to adjust height and add
stability. All drawers are 167/8"W x 153/4"D wide; two drawers are 21/8"H;
four are 43/8"H; and one is 9"H. Open center provides additional storage.
Shelf area has steel back panel. Lockable steel door with 2 keys. Measures
72"W x 30"D x 34"H overall.
• Exclusive I-Frame® steel construction handles up to 50% more stress than
flat-sided workbenches. • 11/2" thick industrial-grade hardboard top reverses
for longer wear
PartNo
CRAFT 9-10383
CRAFT 9-10388
Description
WRK BNCH 12DRW STEEL 54X 20-1/4
WRK BNCH 7DRW STEEL 72X30
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
168.0
210.0
335
Description
TOP WRK BNCH WD W/ 2 VICES
TOP WRK BNCH STEEL
BASE WRK BNCH 10DRW 51-1/2
BASE WRK BNCH 9DRW 51-1/2
Made in the U.S.A.
*Guaranteed Forever*
(Ask your JDC Representative for
Warranty Guidelines)
800-488-9699.
W.t Lbs.
38.0
53.0
128.0
163.0
Tool Storage
Tool Sets
Professional/Mechanics Sets
Professional Tool Set 1,040 Pc.
Craftsman Tools
Workbenches
Large Capacity Workbenches feature 11/4" thick medium density fiberboard • 375 Sockets • 56 Drive Tools • 319 Wrenches • 67 Screwdrivers • 33 Pliers •
190 Additional Tools
worksurfaces. Heavy-gauge steel frame is larger than our standard
PartNo
Description
workbenches. 36" work height. Back trough and molded side tray keep tools
CRAFT 9-34014
SET TOOL 1040PC MECH PRO
and accessories off the worksurface but within easy reach. 2 small parts bins
can be mounted on side of workbench or positioned in drawers Each
workbench measures 60 3/4W x 26 1/2"D x 38 1/2"H overall. All drawers are
16 7/8"W x 15 3/4"D.
PartNo
Description
CRAFT 9-65525
CRAFT 9-65929
WRK BNCH 2DRW
WRK BNCH 5DRW W/BEAR
CRAFT 9-65928
WRK BNCH 5DRW
CRAFT 9-65979
WRK BNCH 8DRW W/BEAR
CRAFT 9-65978
WRK BNCH 8DRW
Powered Backwall Accessory
Drawer
Height
6 3/8"
2 - 2 1/8, 2
- 4 3/8, 1 9
2 - 2 1/8, 2
- 4 3/8, 1 9
2 - 2 1/8, 3
- 4 3/8, 3 9
2 - 2 1/8, 3
- 4 3/8, 3 9
W.t Lbs.
122.0
180.0
147.0
210.0
168.0
•396 Sockets • 63 Drive Tools • 348 Wrenches • 67 Screwdrivers • 33 Pliers •
PartNo
CRAFT 9-34016
Description
Powered backwall combines overhead light, 6 outlet power strip and pegboard
storage space into one package. Mounts to Craftsman workbenches except 910383 and 9-10388. Overhead light accepts two 4 ft. fluorescent tube lights
(bulbs not included). Outlet strip has durable metal shell and can be mounted
on either side of backwall. Both backwall and workbench are UL listed.
Mounting hardware included for attaching backwall to workbench. Backwall
is constructed of sheetmetal components and fiberboard pegboard. 541/2"W x • 396 Sockets • 63 Drive Tools • 348 Wrenches • 67 Screwdrivers • 33 Pliers •
81/2"D x 271/4"H. Note - Workbench sold separately.
PartNo
CRAFT 9-59018
Description
WRK BNCH PWR BACK WALL
Phone: 402-455-6151
Toll Free: 800-488-9699
W.t Lbs.
20.0
336
PartNo
CRAFT 9-34018
Description
Tool Sets
Mechanic’s Tool Set 170 Pc.
• 82 Sockets • 4 Wrenches • 5 Drive Tools • 31 Additional Tools • Blow
Molded Case
PartNo
CRAFT 9-33122
Description
SET TOOL 122PC MECH
Mechanic’s Tool Set 140 Pc. Metric
PartNo
CRAFT 9-33870
Description
SET TOOL 6PT 170PC MECH
• 125 Sockets • 51 Wrenches • 14 Drive Tools • 10 Additional Tools
PartNo
CRAFT 9-33999
PartNo
CRAFT 9-33941
Description
SET TOOL 140PC MECH MET
Description
SET TOOL 200PC MECH FP
Mechanic’s Tool Set 140 Pc. Standard
PartNo
CRAFT 9-33141
Description
SET TOOL 140PC MECH
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-46572
337
Description
SET TOOL 212PC MECH
Craftsman Tools
Tool Sets
Craftsman Tools
PartNo
CRAFT 9-33354
PartNo
CRAFT 9-34179
Description
SET TOOL 215PC MECH
PartNo
CRAFT 9-46403
Description
SET TOOL 225PC MECH
PartNo
CRAFT 9-47972
Includes 9-46403 and 9-46304.
PartNo
CRAFT 9-800312
Description
SET TOOL 254PC MECH
Description
SET TOOL 266 MECH MET
Description
SET TOOL 241PC MECH W/DR TL
• 152 Sockets • 8 Drive Tools • 26 Wrenches • 60 Additional Tools
PartNo
CRAFT 9-33246
Description
SET TOOL 246PC MECH
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-47971
338
Description
SET TOOL 266PC MECH
Tool Sets
PartNo
CRAFT 9-33255
PartNo
CRAFT 9-33573
Description
SET TOOL 266PC MECH
• 190 Sockets • 62 Wrenches • 13 Drive Tools • 20 Screwdrivers & Nutdrivers
• 51 Additional Tools
PartNo
CRAFT 9-34178
PartNo
CRAFT 9-46567
Description
SET TOOL 271PC MECH
PartNo
CRAFT 9-33247
Description
SET TOOL 310PC MECH
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET TOOL 338PC MECH
PartNo
CRAFT 9-33310
Description
SET TOOL 320PC MECH
339
Description
SET TOOL 400PC MECH
Craftsman Tools
Tool Sets
Craftsman Tools
PartNo
CRAFT 9-33325
Description
SET TOOL 425PC MECH
Description
SET TOOL 62PC MECH
• 21 Sockets • 7 Drive Tools • 29 Wrenches • 4 Additional Tools • 2 Pliers
PartNo
CRAFT 9-34006
Description
SET TOOL 475PC MECH
Description
SET TOOL 63PC MECH HD PRO
Professional Tool Set 673 Pc.
• 248 Sockets • 27 Drive Tools • 108 Wrenches • 15 Screwdrivers • 97
Additional Tools
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
Mechanic’s Tool Set 63 Pc. Heavy Duty
PartNo
CRAFT 9-33996
Description
SET TOOL 546PC MECH
PartNo
CRAFT 9-33462
PartNo
CRAFT 9-33256
PartNo
CRAFT 9-33446
• 330 Sockets • 37 Drive Tools • 142 Wrenches • 29 Screwdrivers • 9 Pliers •
PartNo
CRAFT 9-33998
340
Description
Tool Sets
Serious Professional Mechanic’s Tool Set 77
Pc.
PartNo
CRAFT 9-46379
Description
SET TOOL 88PC MECH MET
• 3 Drive Tools • 53 Wrenches • 16 Pliers • 5 Additional Tools
• 37 Sockets • 9 Drive Tools • 16 Wrenches • 4 Screwdrivers • 22 Additional
Tools
Mechanic’s Tool Set 85 Pc. Large Size
• 46 1/2" Sockets • 7 1/2" Drive Tools • 24 Wrenches • 8 Additional Tools
PartNo
CRAFT 9-34005
PartNo
CRAFT 9-33285
Description
SET TOOL 77PC MECHC ACCES
PartNo
CRAFT 9-46378
Description
SET TOOL 88PC MECH
Description
SET TOOL 85PC LRG MECH
PartNo
CRAFT 9-34012
Description
Auto Specialty Tool Set 98 Pc.
• 23 Brake Tools • 31 Engine Tools • 16 Tune Up/Testing Tools • 9 Battery &
Hose Tools • 8 Shocks/Bearings/Hub & Axle Tools • 11 Specialty Tools
PartNo
CRAFT 9-34009
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-34007
341
Description
SET TOOL 98PC MECH AUTO SPEC
Craftsman Tools
• 37 Sockets • 9 Drive Tools • 16 Wrenches • 4 Screwdrivers • 22 Additional
Tools
Tool Sets
Craftsman Tools
Trade Tool Sets
Industrial Maintenance Basic Tool Set 156 Pc.
Basic Auto Body Tool Set 21 Pc.
Application: • Introduction to Auto Body training.
Recommended Additions: • Tool Storage
**Item Similar to Photo Shown.
PartNo
CRAFT 9-33461
PartNo
CRAFT 9-200152
Description
SET TOOL AUTO BDY 21PC BASC
Basic Brake and Front End Tool Set 15 Pc.
Description
SET TOOL IND MAINT 161PC
Industrial Maintenance Add-On Tool Set 55 Pc.
• 21 Sockets • 17 Wrenches • 6 Drive Tools • 11 Additional Tools **Item
Similar to Photo Shown.
PartNo
CRAFT 9-33355
Description
SET TOOL IND MAINT ADD-ON 55PC
Advanced Auto Body Tool Set 243 Pc.
Description
SET TOOL BRK/FNT END 15PC
Basic Small Engine Repair Tool Set 64 Pc.
PartNo
CRAFT 9-33210
Description
SET TOOL AUTO BDY 243PC ADV
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-800117
Application: Introduction to small engine technology training.
Application: For student or apprentice Auto Body Repair training.
PartNo
CRAFT 9-200150
Application: For adjustment and replacement of brake and front end
components.
342
Description
SET TOOL SM ENGINE 64PC
Tool Sets
Trade Tool Sets
Level #1 Basic Auto/ Diesel Tool Set 135 Pc.
Level #1 Basic HVAC Tool Set
Application: Introduction to Auto, Diesel and Construction Equipment.
PartNo
CRAFT 9-200197
Description
SET TOOL AUTO/DIESEL 135PC LV1
Level #1 Basic Aviation Tool Set
Application: Introduction to HVAC training.
Recommended Additions: • Tool Storage **Item Similar to Photo Shown.
PartNo
CRAFT 9-200156
Description
SET TOOL AVN LV1
Level #1 Basic Field Technician Tool Set 95
Pc.
Level #1 Basic Machines Trades Tool Set
PartNo
CRAFT 9-200285
Description
SET TOOL MACH TRD LV1
Level #2 Advanced Auto/ Diesel Tool Set 241
Pc.
PartNo
CRAFT 9-200199
Description
SET TOOL FLD TECH 95PC LV1
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET TOOL HVAC LV1
Application: Student/Apprentice Auto and Diesel Technology Training
Application: For adjustment and replacement of brake and front end
components.
Recommended Additions:• Tool Storage
PartNo
CRAFT 9-33494
PartNo
CRAFT 9-200145
343
Description
SET TOOL AUTO/DIESEL 241PC LV2
Craftsman Tools
Application: Introduction to HVAC training.
Tool Sets
Level #3 Professional Field Technician Tool
Set 226 Pc.
Craftsman Tools
Trade Tool Sets
Level #2 Advanced Aviation Tool Set
Application: For student training and apprentice Aviation Maintenance and
repair.
PartNo
CRAFT 9-200283
Description
SET TOOL AVN LV2
Level #2 Advanced Field Technician Tool Set
139 Pc.
Application: Maintenance and repair of machine and equipment at remote
locations
Recommended Additions: • Portable Tool Storage
PartNo
CRAFT 9-33432
Description
Level #2 Advanced HVAC Tool Set
Application: Intermediate HVAC training.
PartNo
CRAFT 9-200161
PartNo
CRAFT 9-33436
Description
Level #3 Professional Auto Tool Set
Application: For work force and advanced training.
PartNo
CRAFT 9-200260
Description
SET TOOL AUTO/DIESEL LV3
Level #3 Professional Aviation Tool Set
Application: For work force or student use in Aviation maintenance or repair.
Description
SET TOOL HVAC LV2
Phone: 402-455-6151
Toll Free: 800-488-9699
Application: Maintenance and repair of machine and equipment at remote
locations
Recommended Additions: • Portable Tool Case
PartNo
CRAFT 9-200284
344
Description
SET TOOL AVN LV3
Tool Sets
Auto Mechanic’s Specialty Add-On Set 94 Pc.
Trade Tool Sets
Level #3 Professional Diesel Tool Set
PartNo
CRAFT 9-33920
Application: For work force and advanced training.
PartNo
CRAFT 9-200262
Sockets, Ratchets, Wrenches
Description
SET TOOL AUTO/DIESEL PRO
Add-on Sets
Accessory Kit 109 Pc. Metric
Consists of: 65-1/4, 3/8, 1/2 sockets, 22 combination open end wrences,
ignition wrench and hex keys.
PartNo
CRAFT 9-33051
Description
SET TOOL AUTO 94PC
Sockets and Ratchets
Socket Wrench Set 24 Pc. 1/4”, 3/8” Drive
Metric
Description
SET TOOL ACCESS 109PC MET
Accessory Kit 160 Pc. Metric
1/4 Inch Drive Sockets • 6 Six-Point Metric Sockets • 4 Six-Point Metric
Deep Sockets • 3/8 Inch Drive Sockets • 6 Six-Point Metric Sockets • 4 SixPoint Metric Deep Sockets • 1 Spark Plug Socket 5¼8"
3/8 Inch Drive Tools • QR Teardrop Ratchet • 3" Extension Bar • 3/8"M1/4"F Adapter • Blow Molded Case
PartNo
CRAFT 9-33053
Description
PartNo
CRAFT 9-33058
Description
PartNo
CRAFT 9-34821
Accessory Set 212 Pc. Metric
Phone: 402-455-6151
Toll Free: 800-488-9699
345
Description
SET SKT 1/4-3/8DR 6PT 24PC MET
Craftsman Tools
• 24 Brake Tools • 17 Engine Tools • 13 Tune Up and Testing Tools • 40
Additional Service and Repair Tools
Sockets,
Rachets, Wrenches
Wrenches
Sockets, Ratchets,
Standard
1/4 Inch Drive Sockets • 6 Six-Point Standard Sockets • 4 Six-Point Standard
Deep Sockets • 3/8 Inch Drive Sockets • 6 Six-Point Standard Sockets • 4 SixPoint Standard Deep Sockets • 1 Spark Plug Socket 5¼8" • 3/8 Inch Drive
Tools • QR Teardrop Ratchet • 3" Extension Bar • 3/8"M-1/4"F Adapter •
Blow Molded Case
1/4 Inch Drive Sockets • 8 Six-Point Standard Sockets • 5 Six-Point Standard
Deep Sockets • 1/4 Inch Drive Tools • 3/8 Inch Drive Sockets • 8 Six-Point
Standard Sockets • 5 Six-Point Standard Deep Sockets
1 Spark Plug Socket • 3/8 Inch Drive Tools • QR Teardrop Ratchet Long • 3"
Extension Bar • 6" Extension Bar • 3/8"M-1/4"F Adapter
Craftsman Tools
Standard
PartNo
CRAFT 9-34820
Description
SET SKT 1/4-3/8DR 6PT 24PC
Release Ratchet Set 3 Pc. Full Polish Quick
Includes 1/4" drive (9-44812), 3/8" drive (9-44813) and 1/2" drive (9-44814)
ratchets.
PartNo
CRAFT 9-44803
Description
SET RAT 1/4-3/8-1/2DR QR 3PC F
PartNo
CRAFT 9-34832
Description
SET SKT 1/4-3/8DR 6PT 32PC
Standard/Metric
Quick Release Teardrop Ratchet Set 3 Pc.
Includes 1/4" drive (9-44807), 3/8" drive (9-44808) and 1/2" drive (9-44809)
ratchets.
PartNo
CRAFT 9-800303
Description
SET RAT 1/4-3/8-1/2DR QR 3P
Metric
1/4 Inch Drive Sockets • 8 Six-Point Standard Sockets • 7 Six-Point Metric
Sockets • 3/8 Inch Drive Sockets • 7 Six-Point Standard Sockets • 6 Six-Point
Metric Sockets • 1 Spark Plug Socket • 3/8 Inch Drive Tools • QR Teardrop
Ratchet • 3" Extension Bar • 3/8"M-1/4"F Adapter
PartNo
CRAFT 9-34740
1/4 Inch Drive Sockets • 8 Six-Point Metric Sockets • 5 Six-Point Metric
Deep Sockets • 1/4 Inch Drive Tools • 6" Spinner Handle • 3/8 Inch Drive
Sockets • 8 Six-Point Metric Sockets • 5 Six-Point Metric Deep Sockets • 1
Spark Plug Socket 5¼8" • 3/8 Inch Drive Tool • QR Teardrop Ratchet Long •
3" Extension Bar • 6" Extension Bar • 3/8"M-1/4"F Adapter
PartNo
CRAFT 9-34833
Description
SET SKT 1/4-3/8DR 6PT 32PC MET
Phone: 402-455-6151
Toll Free: 800-488-9699
346
Description
SET SKT 1/4-3/8DR 32PC MET/ SAE
800-488-9699
Sockets,
Sockets,Ratchets,
Rachets,Wrenches
Wrenches
Socket Sets - 12 Pc. 1/4” Drive Bit Set
Socket Set 82 Pc. 1/4”, 3/8” & 1/2” Drive
Standard/Metric
PartNo
CRAFT 9-42712
Description
SET SKT BIT 1/4DR 12PC
1/4 Inch Drive Sockets • 10 Six-Point Standard Sockets • 8 Six-Point Metric
Socket Sets - 125 Pc. 1/4” Drive
Sockets • 4 Six-Point Standard Deep Sockets • 3/8 Inch Drive Sockets • 8 SixStandard/Metric Socket Wrench Set
Point Standard Sockets • 10 Twelve-Point Standard Sockets • 8 Six-Point
Metric Sockets • 6 Six-Point Standard Deep Sockets • 1/2 Inch Drive Sockets •11 Six-Point Standard Sockets • 12 Six-Point Metric Sockets • 10 Six-Point
• 12 Twelve-Point Standard Sockets • 9 Twelve-Point Metric Sockets • 7 Six- Standard Deep Sockets • 11 Six-Point Metric Deep Sockets • 10 Twelve-Point
Standard Sockets • 10 Twelve-Point Standard Deep Sockets • 12 Pc.
Point Standard Deep Sockets
PartNo
Description
Nutdriver Bit Set • 9-4112 12 Pc. Bit Set •10 Pc. Bit Set • 11 Standard Hex
CRAFT 9-43148
Keys • 11 Metric Hex Keys •6 Standard Combination Wrenches • 6 Metric
Combination Wrenches • Drive Tools • QR Teardrop Ratchet • 1 1/2"
Socket Sets - 10 Pc. 1/4” Drive Metric Flex
Socket Set
Extension Bar • 3" Extension Bar •6" Extension Bar • Magnetic Spin Handle
Includes 5mm - 14mm flex sockets.
PartNo
CRAFT 9-33407
PartNo
CRAFT 9-34953
Description
SET SKT UNIV 1/4DR 10PC MET
Socket Sets - 10 Pc. 1/4” Drive Six-Point
Metric Deep Socket Wrench Set
Socket Sets - 19 Pc. 1/4” Drive Metric Socket
Wrench Sets
10 Six-Point Metric Deep Sockets • 4mm-13mm • Plastic Organizer
PartNo
CRAFT 9-34433
CRAFT 9-34436
Description
SET TOOL 1/4DR 125PC MECH
Description
SET SKT 1/4DR 6PT 10PC MET
SET SKT 1/4DR 6PT 10PC MET DP
Standard Deep Socket Set
10 Six-Point Standard Deep Sockets • Plastic Organizer
PartNo
CRAFT 9-34432
Description
SET SKT 1/4DR 12PT 10PC
Standard Socket Set
9-34801 Consists of:
11 Six-Point Metric Sockets
5 Six-Point Metric Deep Sockets
QR Teardrop Ratchet
3" Extension Bar
6" Spinner Handle
9-34801IN Blow Molded Case
10 Six-Point Standard Sockets •Plastic Organizer
PartNo
CRAFT 9-34431
Description
Socket Sets - 10 Pc. 1/4” Drive Twelve-Point
10 Twelve-Point Standard Deep Sockets • Plastic Organizer
PartNo
CRAFT 9-34435
Description
SET SKT 1/4DR 12PT 10PC DP
Phone: 402-455-6151
Toll Free: 800-488-9699
347
PartNo
CRAFT 9-34702
CRAFT 9-34801
10 Six-Point Metric Sockets
5 Six-Point Metric Deep Sockets
QR Teardrop Ratchet
6" Spinner Handle
3" and 1 1/2" Extension Bar
Description
SET SKT 1/4DR 6PT 19PC MET CAS
Craftsman Tools
Includes: 5 Hex Bit Sockets (3/16", 7/32", 1/4", 5/16", 3/8); 2 Slotted Bit
Sockets (5-6, 6-8); 2 Phillips Bit Sockets (#1, #2); 3 Torx® Bit Sockets (T-15,
T-20, T-25).
Sockets,
Rachets, Wrenches
Wrenches
Sockets, Ratchets,
Wrench Set
Craftsman Tools
Socket Sets - 19 Pc. 1/4” Drive Standard
Socket Wrench Sets
11 Six-Point Standart Sockets
5 Six-Point Std Deep Sockets
QR Teardrop Ratchet
3" Extension Bar
6" Spinner Handle
9-34801IN Blow Molded Case
PartNo
CRAFT 9-34701
CRAFT 9-34800
11 Six-Point Metric Sockets • 10 Six-Point Metric Deep Sockets • Drive
Tools • QR Teardrop Ratchet • 3" Extension Bar • 6" Extension Bar •
Universal Joint • 6" Spinner Handle
10 Six-Point Standard Sockets
5 Six-Point Std Deep Sockets
QR Teardrop Ratchet
6" Spinner Handle
3" and 1 1/2" Extension Bar
PartNo
CRAFT 9-34823
Description
Socket Wrench Set
Description
SET SKT 1/4DR 6PT 19PC W/CS
Socket Wrench Set
•1 Six-Point Standard Sockets • 10 Six-Point Standard Deep Sockets • Drive
Tools • QR Teardrop Ratchet • 3" Extension Bar • 6" Extension Bar •
Universal Joint • 6" Spinner Handle
PartNo
CRAFT 9-34822
Description
Standard/Metric Socket Set
•9 Twelve-Point Standard Sockets • 9 Six-Point Standard Deep Sockets •
Drive Tools • QR Teardrop Ratchet • 6" Spinner Handle • 1 1/2" Extension
Bar • 3" Extension Bar • 6" Extension Bar Universal Joint Blow Molded Case
PartNo
CRAFT 9-34804
Description
SET SKT 1/4DR 24PC
•11 Six-Point Standard Sockets • 12 Six-Point Metric Sockets • 10 Six-Point
Standard Deep Sockets • 11 Six-Point Metric Deep Sockets
Call to Discuss Our
Integrated Supply Solutions
800-488-9699
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-33405
348
Description
SET SKT 1/4DR 44PC MET/SAE
Sockets,
Rachets, Wrenches
Wrenches
Sockets, Ratchets,
Sockets and Adapters - 1/4” Dr. Phillips Bit
Socket
Standard/Metric Socket Wrench Set
PartNo
CRAFT 9-42681
CRAFT 9-42682
Description
SKT PHLP 1/4DR 1
SKT PHLP 1/4DR 2
PartNo
CRAFT 9-42661
CRAFT 9-42662
CRAFT 9-42663
Description
SKT TRX 1/4DR T-15
SKT TRX 1/4DR T-20
SKT TRX 1/4DR T-25
PartNo
CRAFT 9-43240
CRAFT 9-43241
CRAFT 9-43242
CRAFT 9-43243
CRAFT 9-43244
CRAFT 9-43245
CRAFT 9-43246
CRAFT 9-43247
CRAFT 9-43191
CRAFT 9-43192
CRAFT 9-43193
CRAFT 9-43194
CRAFT 9-43195
CRAFT 9-43196
CRAFT 9-43197
CRAFT 9-43198
CRAFT 9-43199
CRAFT 9-43200
Description
SKT UNV 1/4DR 6PT 3/16
SKT UNV 1/4DR 6PT 5MM
Sockets and Adapters - 1/4” Dr. Torx® Bit
Sockets
Standard Deep Sockets • 9 Six-Point Metric Deep Sockets • 2 Slotted
Screwdriver Bit Sockets • 2 Phillips Screwdriver Bit Sockets •Drive Tools •
QR Teardrop Ratchet • 3" Extension Bar •6" Extension Bar
PartNo
CRAFT 9-43146
Description
SET SKT 1/4DR 6PT 45PC MET/ SAE
Sockets and Adapters - 1/4” Drive Flex
Sockets
Standard Deep Sockets
•11 Six-Point Metric Deep Sockets •10 Twelve-Point Standard Sockets •2
Phillips Screwdriver Bit Sockets •2 Slotted Bit Sockets •3 Torx® Bit Sockets
•5 Hex Bit Sockets •Drive Tools •QR Teardrop Ratchet
•3" Extension Bar •6" Extension Bar •Flex Extension Bar •4 1/2" Slide Bar
Handle •Universal Joint •Flex T-Handle
PartNo
CRAFT 9-34827
Description
SET SKT1/4DR 73PC SAE/MET
Socket Sets - 8 Pc. 1/4” Drive Standard Flex
Socket Set
Sockets and Adapters - 1/4” Drive Hex Bit
Sockets
1 7/8 inches long.
Includes 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" flex sockets.
PartNo
CRAFT 9-33406
Description
SET SKT UNIV 1/4DR 8PC
Phone: 402-455-6151
Toll Free: 800-488-9699
349
PartNo
CRAFT 9-42701
CRAFT 9-42702
CRAFT 9-42703
CRAFT 9-42704
CRAFT 9-42705
Description
SKT HEX 1/4DR 3/16
SKT HEX 1/4DR 7/32
SKT HEX 1/4DR 1/4
SKT HEX 1/4DR 5/16
SKT HEX 1/4DR 3/8
Craftsman Tools
1 5/8 inches long Phillips head.
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets and Adapters - 1/4” Drive Metric Deep
Sockets
Craftsman Tools
Six Point
PartNo
CRAFT 9-44401
CRAFT 9-44402
CRAFT 9-44403
CRAFT 9-44404
CRAFT 9-44405
CRAFT 9-44406
CRAFT 9-44407
CRAFT 9-44408
CRAFT 9-44409
CRAFT 9-44411
CRAFT 9-44412
Description
SKT 1/4DR 6PT 4MM DP
PartNo
CRAFT 9-43505
CRAFT 9-43501
CRAFT 9-43511
CRAFT 9-43502
CRAFT 9-43503
CRAFT 9-43504
CRAFT 9-43507
CRAFT 9-43508
CRAFT 9-43509
CRAFT 9-43513
CRAFT 9-43514
CRAFT 9-43512
Six and Twelve Point
Description
SKT 1/4DR 6PT 4MM
SKT 1/4DR 6PT 5MM
SKT 1/4DR 6PT 5.5MM
SKT 1/4DR 6PT 6MM
SKT 1/4DR 6PT 7MM
SKT 1/4DR 6PT 8MM
SKT 1/4DR 6PT 9MM
SKT 1/4DR 6PT 10MM
SKT 1/4DR 6PT 11MM
SKT 1/4DR 6PT 12MM
SKT 1/4DR 6PT 13MM
SKT 1/4DR 6PT 14MM
Sockets and Adapters - 1/4” Drive Slotted Bit
Socket
1 7/8 inches long.
PartNo
CRAFT 9-42691
CRAFT 9-42692
Description
SKT 1/4DR 6PT 9/32 DP
SKT 1/4DR 6PT 1/2DP
SKT 1/4DR 12PT 11/32 DP
Sockets and Adapters - 1/4” Drive Standard
Sockets
Sockets and Adapters - 1/4” Drive Metric
Sockets
Six Point
PartNo
CRAFT 9-43574
CRAFT 9-43575
CRAFT 9-43576
CRAFT 9-43577
CRAFT 9-43578
CRAFT 9-43589
CRAFT 9-43587
CRAFT 9-43590
CRAFT 9-43591
CRAFT 9-43592
CRAFT 9-43593
CRAFT 9-43594
CRAFT 9-43595
CRAFT 9-43596
CRAFT 9-43597
CRAFT 9-43598
CRAFT 9-43599
PartNo
CRAFT 9-43481
CRAFT 9-43491
CRAFT 9-43492
CRAFT 9-43493
CRAFT 9-43494
CRAFT 9-43495
CRAFT 9-43496
CRAFT 9-43497
CRAFT 9-43498
CRAFT 9-43499
CRAFT 9-43480
CRAFT 9-43608
CRAFT 9-43609
CRAFT 9-43601
CRAFT 9-43602
CRAFT 9-43603
CRAFT 9-43604
CRAFT 9-43605
CRAFT 9-43606
CRAFT 9-43607
CRAFT 9-43610
Sockets and Adapters - 1/4” Drive Universal
Joint
Swings 90°.
PartNo
CRAFT 9-4280
Description
SKT SLT 1/4DR .030X1/4
Description
SKT 1/4DR 6PT 5/32
SKT 1/4DR 6PT 3/16
SKT 1/4DR 6PT 7/32
SKT 1/4DR 6PT 1/4
SKT 1/4DR 6PT 9/32
SKT 1/4DR 6PT 5/16
SKT 1/4DR 6PT 11/32
SKT 1/4DR 6PT 3/8
SKT 1/4DR 6PT 7/16
SKT 1/4DR 6PT 1/2
SKT 1/4DR 6PT 9/16
SKT 1/4DR 12PT 3/16
SKT 1/4DR 12PT 7/32
SKT 1/4DR 12PT 1/4
SKT 1/4DR 12PT 9/32
SKT 1/4DR 12PT 5/16
SKT 1/4DR 12PT 11/32
SKT 1/4DR 12PT 3/8
SKT 1/4DR 12PT 7/16
SKT 1/4DR 12PT 1/2
SKT 1/4DR 12PT 9/16
Description
UNV JNT 1/4DR
Drive Tools and Extensions - 1/4” Dr. Quick
Release Round Head Ratchet
Sockets and Adapters - 1/4” Drive Socket
Adapter
Features double-pawl design and built-in knurled speeder. 45 teeth, 51/4"
long.
PartNo
CRAFT 9-43187
Attaches 3/8" drive sockets to 1/4" drive handles.
PartNo
CRAFT 9-4257
Description
ADP 1/4DR 1/4FX3/8M
Deep Sockets
Six and Twelve Points
PartNo
CRAFT 9-43571
CRAFT 9-43572
CRAFT 9-43573
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
Release Teardrop Ratchet
36 teeth, 51/4" long.
PartNo
CRAFT 9-44807
350
Description
RAT 1/4DR RH QR 5-1/4
Description
RAT 1/4DR TD QR 5-1/4
Sockets,
Wrenches
Sockets, Ratchets,
Rachets, Wrenches
Drive Tools and Extensions - 1/4” Drive 15
1/2” Speeder Wrench
PartNo
CRAFT 9-4281
Description
HDL SPD 1/4DR 15-1/2
Drive Tools and Extensions - 1/4” Drive 4 1/2”
Slide-Bar Handle
s used as “T” or “L” handle.
PartNo
CRAFT 9-4354
Description
HDL T 1/4DR 4-1/2
Drive Tools and Extensions - 1/4” Drive 5 1/2”
Long Flex T-Handle
PartNo
CRAFT 9-44346
CRAFT 9-44347
CRAFT 9-44348
CRAFT 9-43345
Description
EXTEN 1/4DR QR 3
EXTEN 1/4DR QR 6
EXTEN 1/4DR QR 10
SET EXTEN 1/4DR QR 3PC
PartNo
CRAFT 9-43351
CRAFT 9-43393
Description
HDL SPN 1/4DR 4-1/2
HDL SPN 1/4DR 6
Drive Tools and Extensions - 1/4” Drive Plastic
Handle Driver
Drive Tools and Extensions - 1/4” Drive Plastic
Handle Flex Driver
With spring steel shaft. 4" long.
PartNo
CRAFT 9-4355
Has hinged joint. Positive stop at 0° and 45°.
PartNo
CRAFT 9-43523
Drive Tools and Extensions - 1/4” Drive
Ratchet Repair Kits
Description
HDL 1/4DR FLX 5-1/2
Extension Bars
New mechanisms to renew ratchets. • 9-43425 For Ratchet 9-43174. • 943426 For Ratchets 9-43178 and 9-43187. •9-43427 For Ratchet 9-43186. •943424 For Ratchets 9-44807 and 9-44812. •9-43439 For Ratchets 9-44994.
PartNo
CRAFT 9-43425
CRAFT 9-43426
CRAFT 9-43427
CRAFT 9-43424
CRAFT 9-43439
Extend reach of socket for work in tight places.
PartNo
CRAFT 9-43538
CRAFT 9-43539
CRAFT 9-43531
CRAFT 9-43532
Description
EXTEN 1/4DR 1-1/2
EXTEN 1/4DR 3
EXTEN 1/4DR 6
EXTEN 1/4DR 14
Drive Tools and Extensions - 1/4” Drive Flex
Extension Bar
Description
EXTEN 1/4DR FLX 4
Drive Tools and Extensions - 1/4” Drive Full
Polish Quick Release Teardrop Ratchet
Description
REP KIT RAT 1/4DR
REP KIT RAT 1/4DR
REP KIT RAT 1/4DR
REP KIT RAT 1/4DR
REP KIT RAT 1/4DR
Drive Tools and Extensions - 1/4” Drive Thin
Profile Teardrop Ratchet
Easy access in tight spaces - plus, high strength. Quick release and reversing
buttons. Full polish comfort grip handle. 6° sweep.
PartNo
CRAFT 9-44994
With spring steel shaft. 4" long.
PartNo
CRAFT 9-4336
Description
HDL 1/4DR SPN FLX 4
Description
RAT 1/4DR TD THN QR FP
Drive Tools and Extensions - 4 Pc. 1/4” Drive
Extension Bar Set
Includes 11/2", 3", 6" extension bars and 6" Spinner Handle.
PartNo
CRAFT 9-43394
Description
SET EXTEN 1/4DR W/SPIN 4PC
Accessory Kit
Teardrop ratchet design. Features one-hand direction reverse lever. The raised
Includes: 11/2" Extension Bar (9-43538); 3" Extension Bar (9-43539); 6"
lip beneath reversing lever prevents accidental lever reversal. 10° ratcheting
Extension Bar (9-43531); Flex Extension (9-4336); 6" Spinner Handle (9arc. 51/2" long.
43393); 6" Flex Handle (9-325230; Speeder Wrench (9-4281)
PartNo
CRAFT 9-44812
Description
RAT 1/4DR TD QR 5-1/2 FP
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-34391
351
Description
SET DRV 1/4DR ACSRY 7PC
Craftsman Tools
For rapid removal, insertion of fasteners.
Locking Extension Bars
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
PartNo
CRAFT 9-44261
CRAFT 9-44262
CRAFT 9-44263
Description
EXTEN 3/8DR 6
EXTEN 3/8DR 10
EXTEN 3/8DR 20
Drive Tools and Extensions - 2 Pc. Full Polish Drive Tools and Extensions - 3/8” Drive Flex
T-Handle
Ratchet Set
Craftsman Tools
Includes 11" QR ratchet (9-44833) and flex-stubby ratchet (9-44834).
PartNo
CRAFT 9-44802
Description
SET RAT 3/8DR 2PC FP
Drive Tools and Extensions - 3/8” Dr.
Industrial Finish Teardrop Ratchet
Length: 10”. Positive stops at 0°, 45°.
PartNo
CRAFT 9-44363
Flex-Head Quick Release Teardrop Ratchet
Quick-release, 36 teeth. 6 3/4" long.
PartNo
CRAFT 9-44837
Description
RAT 3/8DR TD QR 6-3/4 BLK
36 Teeth.
PartNo
CRAFT 9-44808
CRAFT 9-44811
Description
Handle adjusts 0° to 90° with positive stop at 0° and 45°. 45 teeth, 11" long.
Description
RAT 3/8DR RH FLX 11
Drive Tools and Extensions - 3/8” Dr. Round
Head Quick Release Ratchet
Double-pawl design, built-in knurled speeder. 45 teeth, 6 7/8" long.
PartNo
CRAFT 9-43781
Description
Drive Tools and Extensions - 3/8” Drive Ergo
Flex Teardrop Ratchet
Quick release button, convenient reversing lever. Teardrop shape. 36 teeth.
Easy to clean full polish finish. 12" long.
PartNo
CRAFT 9-44836
PartNo
CRAFT 9-44815
Description
RAT 3/8DR TD FLX QR 11-9/16
Teardrop ratchet design. One-hand direction reverse lever. The raised lip
beneath reversing lever prevents accidental lever reversal. 10° ratcheting arc.
PartNo
CRAFT 9-44813
CRAFT 9-44833
Description
RAT 3/8DR TD QR 11 FP
Locking Extension Bars
PartNo
CRAFT 9-44356
CRAFT 9-44357
CRAFT 9-44358
CRAFT 9-43355
Description
EXTEN 3/8DR QR 3
EXTEN 3/8DR QR 6
EXTEN 3/8DR QR 10
SET EXTEN 3/8DR QR 3PC
Drive Tools and Extensions - 3/8” Drive Offset
Flex Teardrop Ratchet
Description
RAT 3/8DR TD ERGOFLX 12
Extension Bars
Easy to clean full polish finish. 11 1/8" long.
PartNo
CRAFT 9-44835
Extend the reach of the socket for use in tight and confined areas.
PartNo
CRAFT 9-43537
CRAFT 9-44264
Handle adjusts from 0° to 90°, 36 teeth, 11 9/16" long.
Drive Tools and Extensions - 3/8” Dr. Round
Head Flex-Head Ratchet
PartNo
CRAFT 9-42794
Description
HDL FLX 3/8DR 10
Description
EXTEN 3/8DR 1-1/2
EXTEN 3/8DR 3" CHROME
Phone: 402-455-6151
Toll Free: 800-488-9699
352
Description
RAT 3/8DR TD OFF FLX QR 11-1/8
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Drive Tools and Extensions - 3/8” Industrial
Finish Extension Bars
Ratchet Repair Kits
Description
EXTEN 3/8DR 3 BLK
EXTEN 3/8DR 6 BLK
EXTEN 3/8DR 10 BLK
Extension Bar Set
Includes 11/2", 3", 6", 10" bars.
PartNo
CRAFT 9-43282
New mechanisms to renew ratchets.•9-43434 For Ratchets 9-44808, 9-44811,
9-44813, 9-44815, 9-44833, 9-44834, 9-44835, 9-44836.. Wt. 0.2 lbs.•943437 For Ratchet 9-43784. Wt. 0.2 lbs.•9-43436 For Ratchets 9-42792, 943781, 9-43788. Wt. 0.12 lbs.•9-43435 For Ratchet 9-43175. Wt. 0.1 lbs.•943438 For Ratchet 9-44995. Wt. 0.1 lbs.
PartNo
CRAFT 9-43434
CRAFT 9-43437
CRAFT 9-43436
CRAFT 9-43435
CRAFT 9-43438
Includes: 11/2" Extension Bar (9-43537); 3" Extension Bar (9-44264); 6"
Extension Bar (9-44261); 10" Extension Bar (9-44262); 10" Flex “T” Handle
(9-44363); 16" Speeder Bar (9-44271); 3/8" - 1/4" Adapter (9-4256); 3/8" 1/2" Adapter (9-4258).
Length: 7". Can be used as “T” or “L” handle to loosen fasteners.
Description
HDL T 3/8 7
PartNo
CRAFT 9-34392
Speeder Wrench
16" long.
PartNo
CRAFT 9-44271
Trade Tools
55/8" long.
Description
RAT 3/8DR TD FLX STBY QR 5-5/8
PartNo
CRAFT 9-44995
Description
Description
HDL SPD 3/8DR 16
Stubby Flex Teardrop Ratchet
PartNo
CRAFT 9-44834
Drive Tools and Extensions - 8-Pc. 3/8” Drive
Accessory Kit
Description
REP KIT RAT QR 3/8DR
REP KIT RAT 3/8DR
REP KIT RAT 3/8DR
REP KIT RAT 3/8DR
REP KIT RAT 3/8DR
Slide-Bar Handle
PartNo
CRAFT 9-4428
Description
SET EXTEN 3/8DR 4PC
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
353
All the
Automotive,
Plumbing and
Electrical Tools
You Need to Get
the Job Done.
Craftsman Tools
PartNo
CRAFT 9-44206
CRAFT 9-44207
CRAFT 9-44208
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets and Adapters - 3/8” Drive Flexible
Spark Plug Sockets
Craftsman Tools
Sockets and Adapters - 3/8” Crowfoot
Wrenches
Have 6 pt. openings. Nickel-chrome plated.
PartNo
CRAFT 9-43322
CRAFT 9-43323
Attach to 3/8" ratchets or extension bars.
PartNo
CRAFT 9-43611
CRAFT 9-43621
CRAFT 9-43622
CRAFT 9-43623
CRAFT 9-43624
CRAFT 9-43625
CRAFT 9-43626
CRAFT 9-43627
CRAFT 9-43628
CRAFT 9-43588
CRAFT 9-43629
CRAFT 9-43631
CRAFT 9-43632
CRAFT 9-43633
CRAFT 9-43634
CRAFT 9-43635
CRAFT 9-43636
CRAFT 9-43637
CRAFT 9-43638
CRAFT 9-43639
CRAFT 9-43641
Sockets and Adapters - 3/8” Drive Hex Bit
Sockets
Description
WR 3/8DR CRFT 3/8
WR 3/8DR CRFT 7/16
WR 3/8DR CRFT 1/2
WR 3/8DR CRFT 9/16
WR 3/8DR CRFT 5/8
WR 3/8DR CRFT 11/16
WR 3/8DR CRFT 3/4
WR 3/8DR CRFT 13/16
WR 3/8DR CRFT 7/8
WR 3/8DR CRFT 15/16
WR 3/8DR CRFT 1
WR 3/8DR CRFT 10MM
WR 3/8DR CRFT 11MM
WR 3/8DR CRFT 12MM
WR 3/8DR CRFT 13MM
WR 3/8DR CRFT 14MM
WR 3/8DR CRFT 15MM
WR 3/8DR CRFT 16MM
WR 3/8DR CRFT 17MM
WR 3/8DR CRFT 18MM
WR 3/8DR CRFT 19MM
PartNo
CRAFT 9-46669
CRAFT 9-46661
CRAFT 9-46662
CRAFT 9-46663
CRAFT 9-46664
CRAFT 9-46665
CRAFT 9-42674
CRAFT 9-42675
CRAFT 9-42676
CRAFT 9-42677
CRAFT 9-42678
CRAFT 9-42679
Sockets and Adapters - 3/8” Drive Flex
Sockets
PartNo
CRAFT 9-43261
CRAFT 9-43262
CRAFT 9-43263
CRAFT 9-43264
CRAFT 9-43265
CRAFT 9-43266
CRAFT 9-43267
CRAFT 9-43252
CRAFT 9-43253
CRAFT 9-43254
CRAFT 9-43255
CRAFT 9-43256
CRAFT 9-43257
CRAFT 9-43258
CRAFT 9-43202
CRAFT 9-43203
CRAFT 9-43204
CRAFT 9-43205
CRAFT 9-43206
CRAFT 9-43207
CRAFT 9-43208
CRAFT 9-43209
CRAFT 9-43211
Description
SKT HEX 3/8DR 5/32
SKT HEX 3/8DR 3/16
SKT HEX 3/8DR 7/32
SKT HEX 3/8DR 1/4
SKT HEX 3/8DR 5/16
SKT HEX 3/8DR 3/8
SKT HEX 3/8DR 4MM
SKT HEX 3/8DR 5MM
SKT HEX 3/8DR 6MM
SKT HEX 3/8DR 7MM
SKT HEX 3/8DR 8MM
SKT HEX 3/8DR 10MM
Sockets and Adapters - 3/8” Drive Magnetic
Socket Inserts Set
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SKT SPKPLG FLX 3/8DR 5/8
SKT SPKPLG FLX 3/8DR 13/16
Inserts for 3/8" to 7/8". Inserts for 10mm to 19mm sockets.
PartNo
CRAFT 9-41349
CRAFT 9-41350
354
Description
SET SKT MAG INS 3/8DR 10PC
SET SKT MAG INS 3/8DR 10PC MET
Sockets,
Wrenches
Sockets, Ratchets,
Rachets, Wrenches
Sockets and Adapters - 3/8” Drive Metric Deep
Sockets
PartNo
CRAFT 9-43516
CRAFT 9-43516
CRAFT 9-43533
CRAFT 9-43533
CRAFT 9-43536
CRAFT 9-43536
CRAFT 9-43541
CRAFT 9-43541
CRAFT 9-43542
CRAFT 9-43542
CRAFT 9-43543
CRAFT 9-43543
CRAFT 9-43544
CRAFT 9-43544
CRAFT 9-43545
CRAFT 9-43545
CRAFT 9-43546
CRAFT 9-43546
CRAFT 9-43547
CRAFT 9-43547
CRAFT 9-43570
CRAFT 9-43570
CRAFT 9-43548
CRAFT 9-43548
CRAFT 9-43579
CRAFT 9-43579
CRAFT 9-43549
CRAFT 9-43549
CRAFT 9-43580
CRAFT 9-43580
CRAFT 9-43584
CRAFT 9-43584
CRAFT 9-43585
CRAFT 9-43585
CRAFT 9-44294
CRAFT 9-44294
CRAFT 9-44295
CRAFT 9-44295
CRAFT 9-44296
CRAFT 9-44296
CRAFT 9-44301
CRAFT 9-44301
CRAFT 9-44302
CRAFT 9-44302
CRAFT 9-44309
CRAFT 9-44309
CRAFT 9-44303
CRAFT 9-44303
CRAFT 9-44304
CRAFT 9-44304
CRAFT 9-44305
CRAFT 9-44305
CRAFT 9-44306
CRAFT 9-44306
CRAFT 9-44311
CRAFT 9-44311
CRAFT 9-44307
CRAFT 9-44307
CRAFT 9-44312
CRAFT 9-44312
CRAFT 9-44308
CRAFT 9-44308
CRAFT 9-44314
CRAFT 9-44314
Description
SKT 3/8DR 6PT 6MM
SKT 3/8DR 6PT 6MM
SKT 3/8DR 6PT 7MM
SKT 3/8DR 6PT 7MM
SKT 3/8DR 6PT 8MM
SKT 3/8DR 6PT 8MM
SKT 3/8DR 6PT 9MM
SKT 3/8DR 6PT 9MM
SKT 3/8DR 6PT 10MM
SKT 3/8DR 6PT 10MM
SKT 3/8DR 6PT 11MM
SKT 3/8DR 6PT 11MM
SKT 3/8DR 6PT 12MM
SKT 3/8DR 6PT 12MM
SKT 3/8DR 6PT 13MM
SKT 3/8DR 6PT 13MM
SKT 3/8DR 6PT 14MM
SKT 3/8DR 6PT 14MM
SKT 3/8DR 6PT 15MM
SKT 3/8DR 6PT 15MM
SKT 3/8DR 6PT 16MM
SKT 3/8DR 6PT 16MM
SKT 3/8DR 6PT 17MM
SKT 3/8DR 6PT 17MM
SKT 3/8DR 6PT 18MM
SKT 3/8DR 6PT 18MM
SKT 3/8DR 6PT 19MM
SKT 3/8DR 6PT 19MM
SKT 3/8DR 6PT 20MM
SKT 3/8DR 6PT 20MM
SKT 3/8DR 6PT 21MM
SKT 3/8DR 6PT 21MM
SKT 3/8DR 6PT 22MM
SKT 3/8DR 6PT 22MM
SKT 3/8DR 12PT 6MM
SKT 3/8DR 12PT 6MM
SKT 3/8DR 12PT 7MM
SKT 3/8DR 12PT 7MM
SKT 3/8DR 12PT 8MM
SKT 3/8DR 12PT 8MM
SKT 3/8DR 12PT 9MM
SKT 3/8DR 12PT 9MM
SKT 3/8DR 12PT 10MM
SKT 3/8DR 12PT 10MM
SKT 3/8DR 12PT 11MM
SKT 3/8DR 12PT 11MM
SKT 3/8DR 12PT 12MM
SKT 3/8DR 12PT 12MM
SKT 3/8DR 12PT 13MM
SKT 3/8DR 12PT 13MM
SKT 3/8DR 12PT 14MM
SKT 3/8DR 12PT 14MM
SKT 3/8DR 12PT 15MM
SKT 3/8DR 12PT 15MM
SKT 3/8DR 12PT 16MM
SKT 3/8DR 12PT 16MM
SKT 3/8DR 12PT 17MM
SKT 3/8DR 12PT 17MM
SKT 3/8DR 12PT 18MM
SKT 3/8DR 12PT 18MM
SKT 3/8DR 12PT 19MM
SKT 3/8DR 12PT 19MM
SKT 3/8DR 12PT 21MM
SKT 3/8DR 12PT 21MM
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-44369
CRAFT 9-44371
CRAFT 9-44372
CRAFT 9-44373
Description
SKT PHLP 3/8DR 1
SKT PHLP 3/8DR 2
SKT PHLP 3/8DR 3
SKT PHLP 3/8DR 4
PartNo
CRAFT 9-42651
CRAFT 9-42652
CRAFT 9-42653
Description
SKT SLT 3/8DR .030X7/32
SKT SLT 3/8DR .030X9/32
Sockets and Adapters - 3/8” Drive Slotted
Screwdriver Bit Sockets
Sockets and Adapters - 3/8” Drive Socket
Adapter
Allow sockets of one drive size to fit drive tools of another size.
PartNo
CRAFT 9-4256
CRAFT 9-4258
Description
ADP 3/8DR 3/8FX1/4M
ADP 3/8DR 3/8FX1/2M
Sockets and Adapters - 3/8” Drive Spark Plug
Sockets
Have 6 pt. openings. Nickel-chrome plated.
PartNo
CRAFT 9-43324
CRAFT 9-43325
CRAFT 9-43340
CRAFT 9-43330
Description
SKT SPKPLG 3/8DR 6PT 5/8
SKT SPKPLG 3/8DR 6PT 18MM
800-488-9699
355
Craftsman Tools
Sockets and Adapters - 3/8” Drive Phillips
Screwdriver Bit Sockets
Deep Sockets
Craftsman Tools
PartNo
CRAFT 9-43333
CRAFT 9-43331
CRAFT 9-43332
CRAFT 9-43334
CRAFT 9-43335
CRAFT 9-43336
CRAFT 9-43337
CRAFT 9-43338
CRAFT 9-43339
CRAFT 9-43328
CRAFT 9-43329
CRAFT 9-43301
CRAFT 9-43311
CRAFT 9-43312
CRAFT 9-43313
CRAFT 9-43314
CRAFT 9-43316
CRAFT 9-43317
CRAFT 9-43318
CRAFT 9-43319
CRAFT 9-43315
CRAFT 9-43320
Description
SKT 3/8DR 6PT 1 DP
SKT 3/8DR 12PT 11/16 DP
SKT 3/8DR 12PT 13/16 DP
SKT 3/8DR 12PT 15/16 DP
SKT 3/8DR 12PT 1 DP
Six, Eight and Twelve Points
Description
SKT 3/8DR 6PT 1/4
SKT 3/8DR 6PT 5/16
SKT 3/8DR 6PT 3/8
SKT 3/8DR 6PT 7/16
SKT 3/8DR 6PT 1/2
SKT 3/8DR 6PT 9/16
SKT 3/8DR 6PT 5/8
SKT 3/8DR 6PT 11/16
SKT 3/8DR 6PT 3/4
SKT 3/8DR 6PT 13-16
SKT 3/8DR 6PT 7/8
SKT 3/8DR 6PT 15/16
SKT 3/8DR 6PT 1
SKT 3/8DR 8PT 3/4
SKT 3/8DR 8PT 5/16
SKT 3/8DR 8PT 3/8
SKT 3/8DR 8PT 7/16
SKT 3/8DR 8PT 1/2
SKT 3/8DR 12PT 1/4
SKT 3/8DR 12PT 5/16
SKT 3/8DR 12PT 3/8
SKT 3/8DR 12PT 7/16
SKT 3/8DR 12PT 1/2
SKT 3/8DR 12PT 5/8
SKT 3/8DR 12PT 11/16
SKT 3/8DR 12PT 3/4
SKT 3/8DR 12PT 13/16
SKT 3/8DR 12PT 7/8
SKT 3/8DR 12PT 15/16
SKT 3/8DR 12PT 1
Description
UNV JNT 3/8DR
Sockets and Adapters - Ratchet Speeder
Discs
PartNo
CRAFT 9-44191
CRAFT 9-44191
Description
SET RAT 1/4DR SPDR DSC 3PC
SET RAT 1/4DR SPDR DSC 3PC
PartNo
CRAFT 9-4363
Description
SET WR CRFT 10PC MET
Socket Sets - 10 Pc. 3/8” Drive Metric
Crowfoot Wrench Set
Crowfoot Wrench Set
PartNo
CRAFT 9-4362
Description
SET WR CRFT 10PC
PartNo
CRAFT 9-34390
Description
SET SKT UNIV 3/8DR 12PC MET SAE
Socket Sets - 12 Pc. 3/8” Six Point Standard/
Metric Flexible Socket Set
Description
SKT TRX 3/8DR T-30
SKT TRX 3/8DR T-40
SKT TRX 3/8DR T-45
SKT TRX 3/8DR T-50
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-4435
With Plastic Pouch
Sockets and Adapters - 3/8” Drive Torx® Bit
Sockets
PartNo
CRAFT 9-42664
CRAFT 9-42665
CRAFT 9-42666
CRAFT 9-42667
Swings 90°
Set of 3 (1/4", 3/8", 1/2"). Fits between ratchet and socket to hand tighten.
Sockets
PartNo
CRAFT 9-42999
CRAFT 9-43000
CRAFT 9-43001
CRAFT 9-43002
CRAFT 9-43003
CRAFT 9-43004
CRAFT 9-43005
CRAFT 9-43006
CRAFT 9-43007
CRAFT 9-43008
CRAFT 9-43013
CRAFT 9-43020
CRAFT 9-43021
CRAFT 9-44341
CRAFT 9-44342
CRAFT 9-44343
CRAFT 9-44344
CRAFT 9-44345
CRAFT 9-44351
CRAFT 9-44329
CRAFT 9-44331
CRAFT 9-44332
CRAFT 9-44333
CRAFT 9-44335
CRAFT 9-44336
CRAFT 9-44337
CRAFT 9-44338
CRAFT 9-44339
CRAFT 9-44352
CRAFT 9-44353
Sockets and Adapters - 3/8” Drive Universal
Joint
356
•10 Six-Point Standard Sockets •15 Six-Point Metric Sockets •9 Six-Point
Standard Deep Sockets •11 Six-Point Metric Deep Sockets •5 Eight-Point
Standard Sockets •10 Twelve-Point Standard Sockets •12 Twelve-Point
Metric Sockets •9 Six-Point Standard Mid-Length Sockets •11 Six-Point
Metric Mid-Length Sockets •2 Spark Plug Sockets •3 Slotted Screwdriver Bit
Sockets •4 Phillips Screwdriver Bit Sockets •4 Torx® Screwdriver Bit
Sockets •6 Standard Hex Bit Sockets •6 Metric Hex Bit Sockets •Drive Tools
•QR Teardrop Ratchet •3" Extension Bar •6" Extension Bar •10" Extension
Bar •10" Flex T-Handle •Universal Joint
PartNo
CRAFT 9-34826
Description
SET SKT3/8DR 123PC SAE/ME
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Wrench Set
Wrench Set
PartNo
CRAFT 9-34811
Craftsman Tools
•7 Six-Point Metric Sockets •4 Six-Point Metric Deep Sockets •1 Spark Plug
Socket •Drive Tools •QR Teardrop Ratchet •3" Extension Bar •Blow Molded
Case
Description
Socket Wrench Set
•7 Six-Point Standard Sockets •4 Six-Point Standard Deep Sockets •1 Spark
Plug Socket •Drive Tools •QR Teardrop Ratchet •3" Extension Bar •Blow
Molded Case
PartNo
CRAFT 9-34810
Description
SET SKT 3/8DR 14PC
Socket Sets - 18 Pc. 3/8” Drive Bit Socket Set
•6 Standard Hex Bit Sockets •6 Metric Hex Bit Sockets •3 Slotted
Screwdriver Bit Sockets •3 Phillips Screwdriver Bit Sockets
PartNo
CRAFT 9-42680
PartNo
CRAFT 9-34709
Description
SET SKT 3/8DR 19PC MET
Socket Wrench Set
Description
SET SKT BIT 3/8DR 18PC MET/ SAE
Standard/Metric Crowfoot Wrench Set
•8 Twelve-Point Standard Sockets •8 Six-Point Standard Deep Sockets •1
Spark Plug Socket •Drive Tools •QR Teardrop Ratchet •3" Extension Bar
PartNo
CRAFT 9-34708
With Plastic Pouch
PartNo
CRAFT 9-34188
QR Teardrop Ratchet
3" Extension Bar
Description
SET SKT 3/8DR 19PC
Socket Wrench Set
Description
SET WR CRFT 18PC
•7 Six-Point Standard Deep Sockets •8 Twelve-Point Standard Sockets •Drive
Tools •QR Teardrop Ratchet
•11/2" Extension Bar •3" Extension Bar •6" Extension Bar •Universal Joint
•Blow Molded Case
PartNo
CRAFT 9-34802
Description
SET SKT 3/8DR 20PC
Socket Set
Plug Sockets
PartNo
CRAFT 9-34496
Description
Set
•9 Six-Point Metric Sockets •11 Six-Point Metric Deep Sockets •2 Spark Plug
Sockets
PartNo
CRAFT 9-34497
Description
Socket Sets - 23 Pc. 3/8” Drive Standard Bit
Socket Set
•13 Six-Point Standard Sockets •17 Six-Point Metric Sockets •9 Six-Point
•6 Standard Hex Bit Sockets •6 Metric Hex Bit Sockets •4 Torx® Bit Sockets
Standard Deep Sockets •11 Six-Point Metric Deep Sockets •11 Twelve-Point •3 Slotted Screwdriver Bit Sockets •4 Phillips Screwdriver Bit Sockets
Standard Sockets •11 Twelve-Point Metric Sockets •2 Spark Plug Sockets •3 PartNo
Description
Slotted Screwdriver Bit Sockets •10 Pc. Bit Set •12 Pc. Nutdriver Bit Set •9
CRAFT 9-42723
SET SKT BIT 3/8DR 23PC MET/ SAE
Standard Combination Wrenches •10 Metric Combination Wrenches •10 Std
Socket
Sets
27
Pc. 3/8” Drive Metric Socket
Comb. Ignition Wrenches •10 Metric Comb. Ignition Wrenches •11 Standard
Short Arm Hex Keys •9 Standard Long Arm Hex Keys •11 Metric Short Arm Wrench Set
•3" Extension Bar •6" Extension Bar •Magnetic Spin Handle
•11 Six-Point Metric Sockets •11 Six-Point Metric Deep Sockets •2 Spark
Plug Sockets •9Drive Tools •QR Teardrop Ratchet Long •3" Extension Bar
•6" Extension Bar
PartNo
CRAFT 9-34954
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-34817
357
Description
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Craftsman Tools
Socket Wrench Set
Plug Sockets •Drive Tools •QR Teardrop Ratchet Long •3" Extension Bar •6"
Extension Bar
PartNo
CRAFT 9-34816
Description
Socket Sets - 5 Pc. 3/8” Drive Eight-Point
Standard Socket Set
With Plastic Organizer
PartNo
CRAFT 9-34343
Description
Socket Wrench Set
•10 Twelve-Point Standard Sockets •15 Six-Point Metric Sockets •8 Six-Point
Standard Deep Sockets
2 Spark Plug Sockets •11 Six-Point Metric Deep Sockets •3 Slotted
Screwdriver Bit Sockets •3 Phillips Screwdriver Bit Sockets •4 Torx®
Screwdriver Bit Sockets •Drive Tools •QR Teardrop Ratchet •3" Extension
Bar •6" Extension Bar •Universal Joint
PartNo
CRAFT 9-43143
Description
PartNo
CRAFT 9-34449
Description
SET BIT TORX 1/4-3/8DR 7PC
PartNo
CRAFT 9-34445
Description
SET SKT UNIV 3/8DR 6PT 7PC
PartNo
CRAFT 9-34311
Description
SET SKT UNIV 3/8DR 12PT 7PC
Socket Sets - 7 Pc. 1/4” & 3/8” Drive Torx® Bit
Socket Set
Socket Sets - 7 Pc. 3/8” Drive Six Point
Standard Flexible Socket Set
•9 Six-Point Standard Sockets •5 Eight-Point Standard Sockets •8 TwelvePoint Standard Sockets •2 Six-Point Flex Spark Plug Sockets •2 Six-Point
Spark Plug Sockets •3 Screwdriver Bit Sockets •4 Torx® Bit Sockets •3
Phillips Bit Sockets •6 Hex Bit Sockets •Drive Tools •QR Teardrop Ratchet
Long •QR Teardrop Flex Ratchet •10" Flex T Handle •7" Slide Bar •16"
Speeder •Universal Joint •3" Extension Bar •6" Extension Bar •10"
Extension Bar
PartNo
CRAFT 9-34843
Description
SET SKT 3/8DR 51PC
Socket Sets - 7 Pc. 3/8” Twelve Point Standard
Flexible Socket Set
Socket Sets - 9 Pc. 3/8” Drive Six-Point Metric
Deep Socket Set
PartNo
CRAFT 9-34443
•10 Twelve-Point Standard Sockets •17 Six-Point Metric Sockets •2 Spark
Plug Sockets •9 Six-Point Standard Deep Sockets •11 Six-Point Metric Deep Socket Set
Sockets •Drive Tools •QR Teardrop Ratchet •3" Extension Bar •6" Extension With Plastic Organizer
PartNo
Bar •10" Extension Bar
PartNo
CRAFT 9-34319
Description
PartNo
CRAFT 9-34448
Description
SET SKT HEX 3/8DR 6PC MET
Description
SET SKT 3/8D 6PT 9PC MET DP
CRAFT 9-34441
Description
Socket Sets - 6 Pc. 3/8” Drive Metric Hex Bit
Socket Set
Socket Sets - 6 Pc. 3/8” Drive Screwdriver Bit
Socket Set
Standard Socket Set
•3 Slotted Screwdriver Bit Sockets • 3 Phillips Screwdriver Bit Sockets
PartNo
CRAFT 9-42686
Description
SET SKT SLT 3/8DR 6PC
PartNo
CRAFT 9-34447
Description
SET SKT HEX 3/8DR 6PC
PartNo
CRAFT 9-34439
PartNo
CRAFT 9-34437
Description
Description
Socket Sets - 6 Pc. 3/8” Drive Standard Hex Bit Socket Sets - 9 Pc. 3/8” Drive Twelve-Point
Metric Deep Socket Set
Socket Set
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-34444
358
Description
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Flex-Head Quick Release Round Head Ratchet
Handle adjusts from 0° to 90° with positive stops at 0° and 45°. 45 teeth, 16
1/4" long.
Metric Socket Set
Description
PartNo
CRAFT 9-34440
Description
Standard Socket Set
PartNo
CRAFT 9-34438
Description
PartNo
CRAFT 9-44209
CRAFT 9-44210
CRAFT 9-44211
Description
EXTEN 1/2DR 3 BLK
EXTEN 1/2DR 6 BLK
EXTEN 1/2DR 10 BLK
PartNo
CRAFT 9-44983
Description
RAT 1/2DR RH FLX QR 16-1/4
Flex-Head Quick-Release Teardrop Ratchet
Handle adjusts from 0° to 90° with positive stops at 0° and 45°. 36 teeth, 16
5/8" long.
PartNo
CRAFT 9-44816
Description
RAT 1/2DR TD FLX QR 16-5/8
Drive Tools and Extensions - 1/2” Dr.
Industrial Finish Extension Bars
Teardrop ratchet design. One-hand direction reverse lever. The raised lip
helps prevent accidental lever reversal. 10° ratcheting arc. 10 3/8" long.
36 teeth, 10 3/8" long.
PartNo
CRAFT 9-44809
Description
Description
Industrial Finish Teardrop Ratchet
Quick-release. 36 teeth. 10 3/8" long.
Extension Bars
PartNo
CRAFT 9-44838
Description
Drive Tools and Extensions - 1/2” Drive Quick
Release Round Head Ratchet
Extend reach of socket for work in confined areas.
PartNo
CRAFT 9-43522
CRAFT 9-44133
CRAFT 9-44131
CRAFT 9-44132
CRAFT 9-44134
CRAFT 9-43283
PartNo
CRAFT 9-44814
Has double-pawl design and built-in knurled speeder. 45 teeth, 10 3/8" long.
PartNo
CRAFT 9-44977
Description
EXTEN 1/2DR 2
EXTEN 1/2DR 3
EXTEN 1/2DR 6
EXTEN 1/2DR 10
EXTEN 1/2DR 20
SET EXTEN 1/2DR 3PC
Description
Drive Tools and Extensions - 1/2” Drive Flex
Handle
800-488-9699 or visit
www.johnday.com
Have positive stops at 0° and 45°. Hinged joint.
PartNo
CRAFT 9-44201
CRAFT 9-44202
Description
HDL FLX 1/2DR 15
HDL FLX 1/2DR 18
Phone: 402-455-6151
Toll Free: 800-488-9699
359
Craftsman Tools
PartNo
CRAFT 9-34442
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Drive Tools and Extensions - 9-Pc. 1/2” Drive
Accessory Kit
Craftsman Tools
Ratchet Repair Kits
Includes: 2" extension bar (9-43522); 3" extension bar (9-44133); 6"
extension bar (9-44131); 10" extension bar (9-44132); 15" flex “T” handle (944201); speeder bar (9-44161).
PartNo
CRAFT 9-34389
Description
Sockets and Adapters - 1/2” Dr. Socket
Adapter
9-43445 For Ratchets 9-43176, 9-44595, 9-44597. Wt. 0.3 lbs.
9-43444 For Ratchets 9-44809, 9-44814, 9-44816, 9-44838. Wt. 0.3 lbs.
9-43446 For Ratchets 9-44944, 9-44973, 9-44977, 9-44978. Wt. 0.4 lbs.
9-43447 For Ratchets 9-44974, 9-44978. Wt. 0.4 lbs.
9-43432 For Ratchet 9-44996.
PartNo
CRAFT 9-43445
CRAFT 9-43444
CRAFT 9-43446
CRAFT 9-43447
CRAFT 9-43432
Description
REP KIT RAT 1/2DR
REP KIT RAT 1/2DR
REP KIT RAT 1/2DR
REP KIT RAT 1/2DR
REP KIT RAT 1/2DR
Are used as “T” or “L” handles to loosen fasteners.
PartNo
CRAFT 9-44161
Description
ADP 1/2DR 1/2FX3/8M
ADP 1/2DR 1/2FX3/4M
Have 6-pt. openings. Neoprene plug holder.
Description
HDL T 1/2DR 9
HDL T 1/2DR 15
PartNo
CRAFT 9-43327
CRAFT 9-44241
Speeder Wrench
Is 18" Long.
PartNo
CRAFT 9-4259
CRAFT 9-4271
Sockets and Adapters - 1/2” Dr. Spark Plug
Socket
Slide-Bar Handle
PartNo
CRAFT 9-44152
CRAFT 9-44151
Let sockets of one drive size fit drive tools of another.
Description
Sockets and Adapters - 1/2” Dr. Stud Remover
Has 5/16" to 3/4" capacity
Description
HDL SPD 1/2DR 18
PartNo
CRAFT 9-4458
Description
STUD REM 5/16 TO 3/4
Sockets and Adapters - 1/2” Dr. Universal
Joint
PartNo
CRAFT 9-44996
Swings 90°.
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-4425
360
Description
UNV JNT 1/2DR
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Sockets and Adapters - 1/2” Drive Drag-Link
Socket
Description
SKT DRAG LNK 1/2DR 9/16
SKT DRAG LNK 1/2DR 1-3/16
SET SKT DRAG LNK 1/2DR 4PC
Description
SKT 1/2DR 12PT 22MM
SKT 1/2DR 12PT 23MM
SKT 1/2DR 12PT 24MM
SKT 1/2DR 12PT 25MM
SKT 1/2DR 12PT 26MM
SKT 1/2DR 12PT 27MM
SKT 1/2DR 12PT 28MM
SKT 1/2DR 12PT 29MM
SKT 1/2DR 12PT 30MM
SKT 1/2DR 12PT 32MM
SKT 1/2DR 12PT 36MM
Sockets and Adapters - 1/2” Drive Metric Deep Deep Sockets
Sockets
Twelve Point.
PartNo
CRAFT 9-44441
CRAFT 9-44444
CRAFT 9-44442
CRAFT 9-44443
CRAFT 9-44445
CRAFT 9-44459
CRAFT 9-44446
CRAFT 9-44462
CRAFT 9-44447
CRAFT 9-44448
CRAFT 9-44463
CRAFT 9-44449
Six and Twelve Points.
PartNo
CRAFT 9-47582
CRAFT 9-47583
CRAFT 9-47584
CRAFT 9-47585
CRAFT 9-47586
CRAFT 9-47587
CRAFT 9-47588
CRAFT 9-47589
CRAFT 9-47591
CRAFT 9-47592
CRAFT 9-47593
CRAFT 9-47521
CRAFT 9-47522
CRAFT 9-47523
CRAFT 9-47524
CRAFT 9-47525
CRAFT 9-47527
CRAFT 9-47528
CRAFT 9-47529
CRAFT 9-47531
CRAFT 9-47532
CRAFT 9-47533
Description
SKT 1/2DR 12PT 19MMDP
Sockets and Adapters - 1/2” Drive Metric
Sockets
Six and Twelve Points.
PartNo
CRAFT 9-44251
CRAFT 9-44252
CRAFT 9-44253
CRAFT 9-44254
CRAFT 9-44255
CRAFT 9-44256
CRAFT 9-44257
CRAFT 9-44273
CRAFT 9-44258
CRAFT 9-44228
CRAFT 9-44259
CRAFT 9-44274
CRAFT 9-44278
CRAFT 9-44265
CRAFT 9-44231
CRAFT 9-44232
CRAFT 9-44229
CRAFT 9-44233
CRAFT 9-44234
CRAFT 9-44235
CRAFT 9-44236
CRAFT 9-44266
CRAFT 9-44237
CRAFT 9-44267
CRAFT 9-44238
CRAFT 9-44268
CRAFT 9-44249
Description
SKT 1/2DR 6PT 9MM
SKT 1/2DR 6PT 10MM
SKT 1/2DR 6PT 11MM
SKT 1/2DR 6PT 12MM
SKT 1/2DR 6PT 13MM
SKT 1/2DR 6PT 14MM
SKT 1/2DR 6PT 15MM
SKT 1/2DR 6PT 16MM
SKT 1/2DR 6PT 17MM
SKT 1/2DR 6PT 18MM
SKT 1/2DR 6PT 19MM
SKT 1/2DR 6PT 20MM
SKT 1/2DR 6PT 21MM
SKT 1/2DR 6PT 22MM
SKT 1/2DR 12PT 9MM
SKT 1/2DR 12PT 10MM
SKT 1/2DR 12PT 11MM
SKT 1/2DR 12PT 12MM
SKT 1/2DR 12PT 13MM
SKT 1/2DR 12PT 14MM
SKT 1/2DR 12PT 15MM
SKT 1/2DR 12PT 16MM
SKT 1/2DR 12PT 17MM
SKT 1/2DR 12PT 18MM
SKT 1/2DR 12PT 19MM
SKT 1/2DR 12PT 20MM
SKT 1/2DR 12PT 21MM
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SKT 1/2DR 6PT 1DP
SKT 1/2DR 6PT 1-1/16 DP
SKT 1/2DR 6PT 1-1/8 DP
SKT 1/2DR 12PT 11/16 DP
SKT 1/2DR 12PT 13/16 DP
SKT 1/2DR 12PT 15/16 DP
SKT 1/2DR 12PT 1 DP
SKT 1/2DR 12PT 11/16 DP
SKT 1/2DR 12PT 1-1/8 DP
Trade Tools
All the
Automotive,
Plumbing and
Electrical Tools
You Need to Get
the Job Done.
361
Craftsman Tools
PartNo
CRAFT 9-44511
CRAFT 9-44512
CRAFT 9-44513
CRAFT 9-44514
CRAFT 9-34299
PartNo
CRAFT 9-44239
CRAFT 9-44240
CRAFT 9-44242
CRAFT 9-44269
CRAFT 9-44272
CRAFT 9-44243
CRAFT 9-44276
CRAFT 9-44230
CRAFT 9-44244
CRAFT 9-44245
CRAFT 9-44248
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Socket Set
Six, Eight and Twelve Points.
With Plastic Organizer.
Craftsman Tools
Sockets
PartNo
CRAFT 9-44053
CRAFT 9-44054
CRAFT 9-44055
CRAFT 9-44056
CRAFT 9-44057
CRAFT 9-44058
CRAFT 9-44059
CRAFT 9-44063
CRAFT 9-44064
CRAFT 9-44065
CRAFT 9-44066
CRAFT 9-44067
CRAFT 9-44068
CRAFT 9-44052
CRAFT 9-44069
CRAFT 9-44221
CRAFT 9-44222
CRAFT 9-44223
CRAFT 9-44224
CRAFT 9-44225
CRAFT 9-44226
CRAFT 9-47500
CRAFT 9-47501
CRAFT 9-47502
CRAFT 9-47503
CRAFT 9-47504
CRAFT 9-47505
CRAFT 9-47506
CRAFT 9-47507
CRAFT 9-47508
CRAFT 9-47509
CRAFT 9-47511
CRAFT 9-47512
CRAFT 9-47513
CRAFT 9-47514
CRAFT 9-47515
CRAFT 9-47516
CRAFT 9-47510
CRAFT 9-47517
CRAFT 9-47518
Description
SKT 1/2DR 6PT 3/8
SKT 1/2DR 6PT 7/16
SKT 1/2DR 6PT 1/2
SKT 1/2DR 6PT 9/16
SKT 1/2DR 6PT 5/8
SKT 1/2DR 6PT 11/16
SKT 1/2DR 6PT 3/4
SKT 1/2DR 6PT 13/16
SKT 1/2DR 6PT 15/16
SKT 1/2DR 6PT 1
SKT 1/2DR 6PT 1-1/16
SKT 1/2DR 6PT 1-1/8
SKT 1/2DR 6PT 1-3/16
SKT 1/2DR 6PT 1-1/4
SKT 1/2DR 8PT 7/16
SKT 1/2DR 8PT 1/2
SKT 1/2DR 8PT 9/16
SKT 1/2DR 8PT 5/8
SKT 1/2DR 8PT 11/16
SKT 1/2DR 8PT 3/4
SKT 1/2DR 12PT 3/8
SKT 1/2DR 12PT 7/16
SKT 1/2DR 12PT 1/2
SKT 1/2DR 12PT 9/16
SKT 1/2DR 12PT 19/32
SKT 1/2DR 12PT 5/8
SKT 1/2DR 12PT 21/32
SKT 1/2DR 12PT 11/16
SKT 1/2DR 12PT 3/4
SKT 1/2DR 12PT 25/32
SKT 1/2DR 12PT 13/16
SKT 1/2DR 12PT 7/8
SKT 1/2DR 12PT 15/16
SKT 1/2DR 12PT 1
SKT 1/2DR 12PT 1-1/16
SKT 1/2DR 12PT 1-1/8
SKT 1/2DR 12PT 1-3/16
SKT 1/2DR 12PT 1-1/4
SKT 1/2DR 12PT 1-1/2
PartNo
CRAFT 9-34450
CRAFT 9-34451
Description
PartNo
CRAFT 9-34315
CRAFT 9-34388
Description
PartNo
CRAFT 9-34494
Description
PartNo
CRAFT 9-34495
Description
PartNo
CRAFT 9-34314
CRAFT 9-34384
Description
Socket Sets - 11 Pc. 1/2” Drive Standard Deep
Socket Set
Metric Deep Socket Set
Metric Socket Set
Socket Set
Socket Wrench Set
Set
•11 Twelve-Point Standard Sockets •1 Six-Point Spark Plug Socket •Drive
•3" Extension Bar
PartNo
CRAFT 9-34712
PartNo
CRAFT 9-34456
CRAFT 9-34457
Visit Us At
www.johnday.com
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET SKT 1/2DR 14PC
362
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Wrench Set
PartNo
CRAFT 9-34831
Description
Socket Wrench Set
•13 Twelve-Point Standard Sockets •2 Six-Point Spark Plug Sockets •Drive
•3" Extension Bar •Blow Molded Case
PartNo
CRAFT 9-34830
Description
SET SKT 1/2DR 17PC
Wrench Set
•10 Twelve-Point Metric Sockets •5 Twelve-Point Metric Deep Sockets •1
Spark Plug Socket •Drive Tools
•QR Teardrop Ratchet •3" Extension Bar •6" Extension Bar
PartNo
CRAFT 9-34819
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
363
•10 Twelve-Point Standard Sockets •5 Twelve-Point Standard Deep Sockets
•1 Spark Plug Socket
Drive Tools •QR Teardrop Ratchet •3" Ext. Bar •6" Ext. Bar
PartNo
CRAFT 9-34818
Description
Wrench Set
•10 Twelve-Point Metric Sockets •8 Twelve-Point Metric Deep Sockets
•Drive Tools •QR Teardrop Ratchet
•3" Extension Bar •6" Extension Bar
PartNo
CRAFT 9-34805
Description
Socket Wrench Set
•10 Twelve-Point Standard Sockets •8 Twelve-Point Standard Deep Sockets
•Drive Tools •QR Teardrop Ratchet •3" Extension Bar •6" Extension Bar
PartNo
CRAFT 9-34803
Description
Craftsman Tools
•13 Twelve-Point Metric Sockets •2 Spark Plug Sockets •Drive Tools •QR
Teardrop Ratchet •3" Extension Bar •Blow Molded Case
Socket Wrench Set
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Craftsman Tools
Socket Set
•14 Six-Point Standard Sockets •11 Six-Point Standard Deep Sockets •2 SixPoint Spark Plug Sockets
PartNo
CRAFT 9-34498
Description
•14 Six-Point Standard Sockets •21 Twelve-Point Metric Sockets •Drive
Tools •QR Teardrop Ratchet •3" Extension Bar •6" Extension Bar •10"
Extension Bar •Universal Joint
PartNo
CRAFT 9-34825
Description
Wrench Set
Set
Spark Plug Sockets
PartNo
CRAFT 9-43147
Description
Spark Plug Sockets •Drive Tools •QR Teardrop Ratchet •QR Flex Teardrop
Ratchet •2" Extension Bar •3" Extension Bar •6" Extension Bar •10"
Extension Bar •Universal Joint •15" Flex T Handle •18" Speeder Bar •9" Slide
Bar
PartNo
CRAFT 9-34841
Description
Socket Wrench Set
•14 Six-Point Standard Sockets •19 Twelve-Point Metric Sockets •2 Spark
Plug Sockets •Drive Tools
•QR Teardrop Ratchet •3" Extension Bar •6" Extension Bar
PartNo
CRAFT 9-43139
Description
Socket Sets - 4 Pc. 1/2” Drive Standard Deep
Socket Set
PartNo
CRAFT 9-34453
CRAFT 9-34455
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
364
•13 Six-Point Standard Sockets •6 Eight-Point Standard Sockets •11 Six-Point
Standard Deep Sockets •4 Drag Link Sockets •11 Twelve-Point Standard
Deep Sockets •2 Six-Point Spark Plug Sockets •Drive Tools •QR Teardrop
Ratchet •QR Flex Teardrop Ratchet •2" Extension Bar •3" Extension Bar •6"
Extension Bar •10" Extension Bar •15" Flex T Handle •Speeder •Universal
Joint •9" Slide Bar
PartNo
CRAFT 9-34842
Description
SET SKT 1/2DR 57PC
Sockets, Ratchets,
Rachets, Wrenches
Sockets,
Wrenches
Socket Set
Socket Sets - 6 Pc. 1/2” Drive Eight-Point
Standard Socket Set
PartNo
CRAFT 9-34446
PartNo
CRAFT 9-34458
Description
SET SKT UNIV 3/8DR 6PT 7PC MET
PartNo
CRAFT 9-34459
CRAFT 9-34460
Description
•14 Six-Point Standard Sockets •11 Six-Point Standard Deep Sockets •15
Twelve-Point Standard Sockets •21 Twelve-Point Metric Sockets •11 TwelvePoint Metric Deep Sockets •2 Six-Point Spark Plug Sockets
Drive Tools •QR Teardrop Ratchet •3" Extension Bar •6" Extension Bar •10"
Extension Bar •MicroTork Wrench
PartNo
CRAFT 9-34824
Description
PartNo
CRAFT 9-34452
CRAFT 9-34454
Description
•15 Twelve-Point Standard Sockets •15 Twelve-Point Metric Sockets •11
Twelve-Point Std Deep Sockets
•12 Twelve-Point Metric Deep Sockets •2 Six-Point Spark Plug Sockets •11
Standard Combination Wrenches •15 Metric Combination Wrenches •Drive
Tools •QR Teardrop Ratchet •3" Extension Bar
•6" Extension Bar •10" Extension Bar •Flex T-Handle •Speeder •Universal
•14 Six-Point Standard Sockets •11 Six-Point Standard Deep Sockets •7
Twelve-Point Metric Deep Sockets •21 Twelve-Point Metric Sockets •2 Spark Joint
Plug Sockets •Drive Tools •QR Teardrop Ratchet
•3" Extension Bar •6" Extension Bar •10" Extension Bar •Universal Joint
PartNo
CRAFT 9-46300
PartNo
CRAFT 9-34955
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
365
Description
Craftsman Tools
Socket Sets - 6 Pc. 1/2” Drive Metric Deep
Socket Set
Description
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Drive Tools and Extensions - 3/4” Drive Flex-T
Handle
•14 Twelve-Point Standard Sockets •Drive Tools •QR Teardrop Ratchet •8"
Extension Bar •Blow Molded Case
Has positive stops at 0°, 45°. Hinged joint 18" long.
Craftsman Tools
Socket Wrench Set
PartNo
CRAFT 9-46304
CRAFT 9-46304
Description
Socket Wrench Set
PartNo
CRAFT 9-4431
Description
HDL FLX 3/4DR 18
Industrial Finish QR Teardrop Ratchet
Quick-release standard. 19 3/4" long.
PartNo
CRAFT 9-44839
Description
Quick-Release Teardrop Ratchet
•20 Twelve-Point Standard Sockets •Drive Tools •QR Teardrop Ratchet •5"
Extension Bar •8" Extension Bar •16" Extension Bar •Blow Molded Case
PartNo
CRAFT 9-43140
Description
SKT 3/4DR 12PT 7/8
SKT 3/4DR 12PT 15/16
SKT 3/4DR 12PT 1
SKT 3/4DR 12PT 1-1/16
SKT 3/4DR 12PT 1-3/4
SKT 3/4DR 12PT 13/16
SKT 3/4DR 12PT 1-1/4
SKT 3/4DR 12PT 1-5/16
SKT 3/4DR 12PT 1-3/8
SKT 3/4DR 12PT 1-7/16
SKT 3/4DR 12PT 1-1/2
SKT 3/4DR 12PT 1-5/8
SKT 3/4DR 12PT 1-11/16
SKT 3/4DR 12PT 1-3/4
SKT 3/4DR 12PT 1-13/16
SKT 3/4DR 12PT 1-7/8
SKT 3/4DR 12PT 2
SKT 3/4DR 12PT 2-1/8
SKT 3/4DR 12PT 2-3/16
SKT 3/4DR 12PT 2-1/4
SKT 3/4DR 12PT 2-3/8
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-44804
Description
Drive Tools and Extensions - 3/4” Drive Slide
Bar Handle
Description
Sockets and Accessories - 3/4” Drive
Twelve-Point Standard Sockets
PartNo
CRAFT 9-47771
CRAFT 9-47772
CRAFT 9-47773
CRAFT 9-47774
CRAFT 9-47775
CRAFT 9-47776
CRAFT 9-47777
CRAFT 9-47778
CRAFT 9-47779
CRAFT 9-47781
CRAFT 9-47782
CRAFT 9-47783
CRAFT 9-47784
CRAFT 9-47785
CRAFT 9-47786
CRAFT 9-47787
CRAFT 9-47788
CRAFT 9-47789
CRAFT 9-47791
CRAFT 9-47792
CRAFT 9-47793
19 3/4" long.
Is used as “T” or “L” handle to loosen fasteners. 18" long.
PartNo
CRAFT 9-4443
Description
HDL T 3/4DR 18
PartNo
CRAFT 9-19496
CRAFT 9-19497
CRAFT 9-19498
CRAFT 9-19493
CRAFT 9-19499
Description
EXTEN IMP 3/8DR 3
EXTEN IMP 3/8DR 6
EXTEN IMP 1/2DR 3
EXTEN IMP 1/2DR 6
EXTEN IMP 1/2DR 10
Impact Extension Bars
366
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Impact Universal Joints
Description
SKT IMP 1/2DR 6PT 14MM
Impact Socket Set 12-Pc. 1/2” Drive Metric
3/8" Drive • 1/2" Drive
PartNo
CRAFT 9-19491
CRAFT 9-19492
Description
UNV JNT IMP 3/8DR
UNV JNT IMP 1/2DR
Includes 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm,
22mm, 24mm, 27mm. - Blow Molded Case
Impact Socket 1/2” Drive Double-End
PartNo
CRAFT 9-19460
CRAFT 9-19450
Impact Socket Set 12-Pc. 1/2” Drive Standard
Six-point openings. 3/4" on one end, 13/16" at other. For 1/2" drive impact
tools with extended shank.
PartNo
CRAFT 9-19495
Description
SKT IMP 1/2DR 6PT DBL 3/4X 3/16
PartNo
CRAFT 9-19441
CRAFT 9-19442
CRAFT 9-19443
CRAFT 9-19444
CRAFT 9-19445
CRAFT 9-19446
CRAFT 9-19447
CRAFT 9-19448
CRAFT 9-19449
CRAFT 9-19425
CRAFT 9-19426
CRAFT 9-19427
CRAFT 9-19461
CRAFT 9-19462
CRAFT 9-19463
CRAFT 9-19464
CRAFT 9-19465
CRAFT 9-19466
CRAFT 9-19467
CRAFT 9-19468
CRAFT 9-19469
CRAFT 9-19474
CRAFT 9-19475
CRAFT 9-19476
Description
SKT IMP 1/2DR 6PT 3/8 DP
SKT IMP 1/2DR DP 1/2
SKT IMP 1/2DR 1 DP
SKT IMP 1/2DR 6PT 1-1/16 DP
SKT IMP 1/2DR 6PT 12MM DP
PartNo
CRAFT 9-19431
CRAFT 9-19432
CRAFT 9-19433
CRAFT 9-19434
CRAFT 9-19435
CRAFT 9-19436
CRAFT 9-19437
CRAFT 9-19438
CRAFT 9-19439
CRAFT 9-19422
CRAFT 9-19423
CRAFT 9-19424
CRAFT 9-19451
CRAFT 9-19452
Description
SKT IMP 1/2DR 6PT 3/8
SKT IMP 1/2DR 1/2
SKT IMP 1/2DR 1
SKT IMP 1/2DR 6PT 1-1/16
Description
SET SKT IMP 1/2DR 6PT 12PC MET DP
SET SKT IMP 1/2DR 6PT 12PC MET
Impact Sockets 1/2” Drive Six-Point Deep
Standard & Metric
Includes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1”,
11 /16",. Blow Molded Case
PartNo
CRAFT 9-19430
CRAFT 9-19440
Description
SET SKT IMP 1/2DR 6PT 12PC
SET SKT IMP 1/2DR 6PT 12PC DP
Impact Socket Set 21 Pc. 3/8” Drive
•9 Six-Point Impact Sockets •9 Six-Point Deep Impact Sockets •Drive Impact
Tools •3" Extension Bar •6" Extension Bar •Universal Joint
PartNo
CRAFT 9-19360
CRAFT 9-19361
Description
Impact Socket Set 27 Pc. ½” Drive
Impact Sockets 1/2” Drive Six-Point Standard
& Metric
Phone: 402-455-6151
Toll Free: 800-488-9699
•12 Six-Point Impact Sockets •12 Six-Point Deep Impact Sockets •Drive
Impact Tools •3" Extension Bar
•6" Extension Bar •Universal Joint
PartNo
CRAFT 9-19428
CRAFT 9-19429
367
Description
Craftsman Tools
PartNo
CRAFT 9-19453
CRAFT 9-19454
CRAFT 9-19455
CRAFT 9-19456
CRAFT 9-19457
CRAFT 9-19458
CRAFT 9-19459
CRAFT 9-19471
CRAFT 9-19472
CRAFT 9-19473
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Impact Socket Set 68 Pc. 3/8” Drive
Standard/Metric
Craftsman Tools
Impact Sockets 3/8” Drive Six-Point Deep
Standard & Metric
PartNo
CRAFT 9-19371
CRAFT 9-19372
CRAFT 9-19373
CRAFT 9-19374
CRAFT 9-19375
CRAFT 9-19377
CRAFT 9-19376
CRAFT 9-19378
CRAFT 9-19379
CRAFT 9-19381
CRAFT 9-19382
CRAFT 9-19383
CRAFT 9-19384
CRAFT 9-19385
CRAFT 9-19386
CRAFT 9-19387
CRAFT 9-19388
CRAFT 9-19389
CRAFT 9-19391
Description
Impact Sockets 3/8” Drive Six-Point Standard
& Metric
PartNo
CRAFT 9-19401
CRAFT 9-19402
CRAFT 9-19403
CRAFT 9-19404
CRAFT 9-19405
CRAFT 9-19406
CRAFT 9-19407
CRAFT 9-19408
CRAFT 9-19409
CRAFT 9-19411
CRAFT 9-19412
CRAFT 9-19413
CRAFT 9-19414
CRAFT 9-19415
CRAFT 9-19416
CRAFT 9-19417
CRAFT 9-19418
CRAFT 9-19419
CRAFT 9-19421
Description
•3/8” Drive Impact Sockets •9 Six-Point Standard Impact Sockets •6 Six-Point
Metric Impact Sockets •9 Six-Point Standard Deep Impact Sockets •6 SixPoint Metric Deep Impact Sockets •3/8” Impact Drive Tools •3" Extension
Bar •6" Extension Bar •1/2” Drive Impact Sockets •9 Six-Point Standard
Impact Sockets •8 Six-Point Metric Impact Sockets •9 Six-Point Standard
Deep Impact Sockets •8 Six-Point Metric Deep Impact Sockets •1/2” Impact
Drive Tools •6" Extension Bar •3/8" Adapter
PartNo
CRAFT 9-19514
Description
SET SKT IMP 3/8&1/2DR 6PT 68PC
Impact Accessory Kit 9 Pc.
•3/8” Drive Accessories •Universal Joint •3” Extension Bar •6” Extension Bar
•Adapter •1/2” Drive Accessories •3” Extension Bar •6” Extension Bar •10”
Extension Bar •Double End Impact Socket •Universal Joint
PartNo
CRAFT 9-19513
Description
SET IMP ACCESS 3/8&1/2DR 9PC
Trade Tools
All the
Automotive,
Plumbing and
Electrical Tools
You Need to Get
the Job Done.
Phone: 402-455-6151
Toll Free: 800-488-9699
Hand Tools That
Yield the Results
You Demand!
368
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Wrenches
Combination Ignition Wrench Set 10 Pc.
Impact Socket Set 5 Pc. 3/8” & 1/2” Drive
Standard/Metric
PartNo
CRAFT 9-42319
CRAFT 9-42339
•'3/8” Drive Impact Sockets •9 Six-Point Standard Impact Sockets •10 SixPoint Metric Impact Sockets •9 Six-Point Standard Deep Impact Sockets •10
Six-Point Metric Deep Impact Sockets •3/8” Impact Drive Tools •3"
Extension Bar •6" Extension Bar •Universal Joint •1/2” Drive Impact Sockets
•12 Six-Point Standard Impact Sockets •12 Six-Point Metric Impact Sockets
•12 Six-Point Standard Deep Impact Sockets •12 Six-Point Metric Deep
Impact Sockets •1/2” Impact Drive Tools •3" Extension Bar •6" Extension
Bar •10" Extension Bar •Universal Joint •3/8" Adapter •Other Tools
•3/4"x13/16" Dbl End Socket
PartNo
CRAFT 9-34294
Description
SET WR COMB IGNIT 10PC
SET WR COMB IGNIT 10PC MET
Combination Wrench Set 11 Pc. 12 Point
Stubby Full Polish
Description
Impact Socket Set 9-Pc. 3/8” Drive Metric
11 Combination Wrenches w/Rack
PartNo
CRAFT 9-44138
CRAFT 9-44139
Includes 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm.
Blow Molded Case
PartNo
CRAFT 9-19410
CRAFT 9-19380
Description
SET WR COMB STBY 12PT 11PC FP
SET WR COMB STBY 11P FP MET
Description
SET SKT IMP 3/8DR 6PT 9PC MET DP
Impact Socket Set 9-Pc. 3/8” Drive Standard
Includes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4". Blow
Molded Case
PartNo
CRAFT 9-19400
CRAFT 9-19370
Description
SET SKT IMP 3/8D 6PT 9PC DP
Impact Socket Adapter
11 Standard Combination Wrenches w/ Tray
1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 15/16"
11 Metric Combination Wrenches w/ Traiy
7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm,
17mm
PartNo
CRAFT 9-46893
CRAFT 9-46894
Description
SET WR COMB 6PT 11PC
SET WR COMB 6PT 11PC MET
Combination Wrench Set-In Carton 12 Pc. 12
Point
12 Combination Wrenches In Carton
Converts 1/2" drive to 3/8" drive.
PartNo
CRAFT 9-19494
PartNo
CRAFT 9-44741
CRAFT 9-44742
Description
ADP IMP 1/2DR 1/2FX3/8M
Phone: 402-455-6151
Toll Free: 800-488-9699
369
Description
Craftsman Tools
11 Wrenches
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Wrenches
Combination Wrench Set-V-Rack 12 Pc. 12
Point
PartNo
CRAFT 9-45964
Description
SET WR COMB LNG 13PC MET FP
Combination Wrench Set 14 Pc. 12 Point-Blow
Molded Case
15 Combination Wrenches w/ Blow Molded Case
PartNo
CRAFT 9-46933
CRAFT 9-46934
Description
Craftsman Tools
Combination Wrench Set 14 Pc. 12
Point-Roll-Up Pouch
15 Combination Wrenches w/ Roll-Up Pouch
PartNo
CRAFT 9-47014
CRAFT 9-47015
12 Combination Wrenches w/ V-Rack
PartNo
CRAFT 9-47046
CRAFT 9-47047
Description
Combination Wrench Set 14 Pc. 12 Point Full
Polish Long-Pattern
Description
14 Combination Wrenches w/ Roll Up Pouch
PartNo
CRAFT 9-46576
CRAFT 9-46576
CRAFT 9-46577
Industrial Finish Standard
6 Standard Combination Wrenches • 6 Metric Combination Wrench
PartNo
CRAFT 9-34189
Description
SET WR COMB 14PC SAE FP
Description
Combination Wrench Set 12 Pc.
Standard/Metric Ratcheting
6 Standard Wrenches • 6 Metric Wrenches
PartNo
CRAFT 9-34185
Description
SET WR GEAR SAE/MET
Tool Roll-up Pouch-12 Pocket Wrench
Nylon with vinyl backing. Bound Edges. Bound with strap with hook and
loop closure. Tools not included.
PartNo
CRAFT 9-65878
Description
VINYL ROLL NYLON 12 PCKT
Polish Long Pattern
14 Standard Combination Wrenches
PartNo
CRAFT 9-46970
Description
SET WR COMB 12PT 14PC BLK
Visit Us At
www.johnday.com
13 Combination Wrenches Plastic Tray
PartNo
CRAFT 9-45963
Description
SET WR COMB LNG 12PT 13P FP
Phone: 402-455-6151
Toll Free: 800-488-9699
370
Polish Long Pattern
Wrenches
Combination Wrench Set 4 Pc.
Standard/Metric Reversible Ratcheting
PartNo
CRAFT 9-45968
CRAFT 9-45969
Stubby Full Polish Standard/Metric
PartNo
CRAFT 9-46407
Description
SET WR COMB 12PT 18PC FP
SET WR COMB LNG 18PC MET/ SAE F
Description
SET WR COMB GEAR REV 14PC SAE/M
Industrial Finish Metric
10 Standard Combination Wrenches • 10 Metric Combination Wrenches
PartNo
CRAFT 9-34956
Description
SET WR COMB STBY 20PC FP SAE/M
Combination Ignition Wrench Set 20 Pc.
Standard/Metric
15 Metric Combination Wrenches
PartNo
CRAFT 9-46971
Description
SET WR COMB 12PT 15PC MET BLK
10 Standard Wrenches • 10 Metric Wrenches • Four color carton
PartNo
CRAFT 9-47979
Description
17 Combination Wrenches • 10 Combination Ignition Wrenches • Blow
Molded Case
PartNo
CRAFT 9-46935
CRAFT 9-46936
18 Combination Wrenches
PartNo
CRAFT 9-47018
CRAFT 9-47019
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET WR COMB IGNT 12PT 26PC MET
SET WR COMB IGNIT 12PT 26PC
800-488-9699
371
Craftsman Tools
18 Combination Wrenches
Sockets, Ratchets,
Rachets, Wrenches
Sockets,
Wrenches
Craftsman Tools
Wrenches
Polish Long-Pattern Standard/Metric
PartNo
CRAFT 9-34951
Description
SET WR COMB 26PC FP SAE/MET
Standard/Metric
PartNo
CRAFT 9-44048
Description
SET WR COMB 12PT 43PC MET/ SAE
PartNo
CRAFT 9-44098
Standard/Metric
Description
SET WR COMB 6PT 28P MET/SAE
Standard/Metric
PartNo
CRAFT 9-46939
CRAFT 9-46940
Description
SET WR COMB LRG 12PT 5PC SAE
SET WR COMB LRG 12PT 5PC MET
Large-Size Full Polish Long Pattern
PartNo
CRAFT 9-44049
Description
SET WR COMB 12PT 32PC MET/ SAE
Phone: 402-455-6151
Toll Free: 800-488-9699
372
PartNo
CRAFT 9-45965
CRAFT 9-45966
Description
SET WR COMB LRG LNG FP 5PC
SET WR COMB LRG LNG 5PC MET FP
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Wrenches
Combination Wrench Set 5 Pc. Reversible
Ratcheting
PartNo
CRAFT 9-42408
CRAFT 9-42409
8 Wrenches
PartNo
CRAFT 9-42406
CRAFT 9-42407
Description
SET WR COMB GEAR REV 5PC SAE
SET WR COMB GEAR REV 5PC MET
Stubby Full Polish
8 Standard Combination Wrenches • 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",
3/4" • Tray
7 Combination Wrenches • Rack
PartNo
CRAFT 9-44101
CRAFT 9-44111
Description
SET WR COMB GEAR REV 7PC
SET WR COMB GEAR REV 7P MET
8 Metric Combination Wrenches • 8mm, 10mm, 11mm, 12mm, 13mm,
14mm, 15mm, 16mm • Tray
Description
SET WR COMB STBY 12PT 7P FP
SET WR COMB STBY 7PC MET FP
PartNo
CRAFT 9-46891
CRAFT 9-46892
Description
SET WR COMB 6PT 8PC
Combination Wrench Set 7 Pc. Ratcheting
Tool Roll-up Pouch-8 Pocket Wrench
7 Wrenches
Nylon with vinyl backing. Bound Edges. Bound with strap with hook and
loop closure. Tools not included.
PartNo
CRAFT 9-42442
CRAFT 9-42443
Description
SET WR COMB GEAR PWLESS 7PC
SET WR COMB GEAR PWLESS 7PC
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-65877
373
Description
VINYL ROLL NYLON 8 PCKT
Craftsman Tools
5 Wrenches
Combination Wrench Set 7 Pc. Reversible
Ratcheting
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Combination Wrenches Ratcheting - Standard
& Metric
Wrenches
V-Rack
Craftsman Tools
9 Standard Combination Wrenches • 1/4", 5/16", 11/32", 3/8", 7/16", 1/2",
9/16", 5/8", 3/4" • V-Rack
9 Metric Combination Wrenches • 7mm, 8mm, 10mm, 11mm, 12mm, 13mm,
14mm, 15mm, 16mm
V-Rack
PartNo
CRAFT 9-47044
CRAFT 9-47045
Description
SET WR COMB 12PT 9PC SAE
PartNo
CRAFT 9-42320
CRAFT 9-42321
CRAFT 9-42322
CRAFT 9-42323
CRAFT 9-42324
CRAFT 9-42325
CRAFT 9-42326
CRAFT 9-42327
CRAFT 9-42328
CRAFT 9-42329
CRAFT 9-42340
CRAFT 9-42341
CRAFT 9-42342
CRAFT 9-42343
CRAFT 9-42344
CRAFT 9-42345
CRAFT 9-42346
CRAFT 9-42347
CRAFT 9-42348
CRAFT 9-42349
Description
WR COMB IGNIT 5/32
WR COMB IGNIT 3/16
WR COMB IGNIT 13/64
WR COMB IGNIT 7/32
WR COMB IGNIT 15/64
WR COMB IGNIT 1/4
WR COMB IGNIT 9/32
WR COMB IGNIT 5/16
WR COMB IGNIT 3/8
WR COMB IGNIT 7/16
WR COMB IGNIT 4MM
WR COMB IGNIT 4.5MM
WR COMB IGNIT 5MM
WR COMB IGNIT 5.5MM
WR COMB IGNIT 6MM
WR COMB IGNIT 7MM
WR COMB IGNIT 8MM
WR COMB IGNIT 9MM
WR COMB IGNIT 10MM
WR COMB IGNIT 11MM
Combination Ignition Wrenches - Standard &
Metric
PartNo
CRAFT 9-42412
CRAFT 9-42413
CRAFT 9-42414
CRAFT 9-42415
CRAFT 9-42416
CRAFT 9-42417
CRAFT 9-42418
CRAFT 9-42419
CRAFT 9-42420
CRAFT 9-42421
CRAFT 9-42422
CRAFT 9-42423
CRAFT 9-42424
CRAFT 9-42425
CRAFT 9-42426
CRAFT 9-42427
CRAFT 9-42428
CRAFT 9-42429
CRAFT 9-42430
Description
WR COMB GEAR REV 5/16
WR COMB GEAR REV 8MM
Combination Wrench & Screwdriver & Holders
Description
WR COMB 12PT 3/8 BLK
WR COMB 12PT 1 BLK
WR COMB 12PT 1-1/16 BLK
WR COMB 12PT 10MM BLK
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
WR PAWLESS COMB 5/16
WR PAWLESS COMB 3/8
WR PAWLESS COMB 1/2
WR PAWLESS COMB 5/8
WR PAWLESS COMB 3/4
WR PAWLESS COMB 8MM
WR PAWLESS COMB 10MM
Combination Wrenches Reversible Ratcheting
- Standard & Metric
Combination Wrenches Industrial Finish
Twelve Point - Standard & Metric
PartNo
CRAFT 9-46582
CRAFT 9-46583
CRAFT 9-46584
CRAFT 9-46585
CRAFT 9-46586
CRAFT 9-46587
CRAFT 9-46588
CRAFT 9-46589
CRAFT 9-46590
CRAFT 9-46591
CRAFT 9-46592
CRAFT 9-46593
CRAFT 9-46594
CRAFT 9-46595
CRAFT 9-46973
CRAFT 9-46974
CRAFT 9-46975
CRAFT 9-46976
CRAFT 9-46977
CRAFT 9-46978
CRAFT 9-46979
CRAFT 9-46980
CRAFT 9-46981
CRAFT 9-46982
CRAFT 9-46983
CRAFT 9-46984
CRAFT 9-46985
CRAFT 9-46986
CRAFT 9-46987
PartNo
CRAFT 9-42633
CRAFT 9-42634
CRAFT 9-42635
CRAFT 9-42636
CRAFT 9-42637
CRAFT 9-42638
CRAFT 9-42647
CRAFT 9-42639
CRAFT 9-42640
CRAFT 9-42641
CRAFT 9-42648
CRAFT 9-42642
CRAFT 9-42643
CRAFT 9-42644
CRAFT 9-42645
CRAFT 9-42646
Combination pack includes 2 screwdriver holders (9-65273) and 2 wrench
holders (9-65272).
PartNo
CRAFT 9-65453
Description
SET ORG WR/SCRW 2PC
PartNo
CRAFT 9-44381
CRAFT 9-44382
CRAFT 9-44399
CRAFT 9-44383
CRAFT 9-44384
Description
WR COMB 6PT 1/4
WR COMB 6PT 5/16
WR COMB 6PT 11/32
WR COMB 6PT 3/8
WR COMB 6PT 7/16
Combination Wrenches Six Point-Standard &
Metric
374
Combination Wrenches Twelve Point Full
Polish - Standard & Metric
PartNo
CRAFT 9-44385
CRAFT 9-44386
CRAFT 9-44387
CRAFT 9-44388
CRAFT 9-44389
CRAFT 9-44390
CRAFT 9-44391
CRAFT 9-44392
CRAFT 9-44393
CRAFT 9-42863
CRAFT 9-42864
CRAFT 9-42865
CRAFT 9-42866
CRAFT 9-42867
CRAFT 9-42868
CRAFT 9-42869
CRAFT 9-42870
CRAFT 9-42871
CRAFT 9-42872
CRAFT 9-42873
CRAFT 9-42874
CRAFT 9-42875
CRAFT 9-42876
Description
WR COMB 6PT 1/2
WR COMB 6PT 9/16
WR COMB 6PT 5/8
WR COMB 6PT 11/16
WR COMB 6PT 3/4
WR COMB 6PT 13/16
WR COMB 6PT 7/8
WR COMB 6PT 15/16
WR COMB 6PT 1
WR COMB 6PT 6MM
WR COMB 6PT 7MM
WR COMB 6PT 8MM
WR COMB 6PT 9MM
WR COMB 6PT 10MM
WR COMB 6PT 11MM
WR COMB 6PT 12MM
WR COMB 6PT 13MM
WR COMB 6PT 14MM
WR COMB 6PT 15MM
WR COMB 6PT 16MM
WR COMB 6PT 17MM
WR COMB 6PT 18MM
WR COMB 6PT 19MM
PartNo
CRAFT 9-44699
CRAFT 9-44691
CRAFT 9-44692
CRAFT 9-44693
CRAFT 9-44694
CRAFT 9-44695
CRAFT 9-44696
CRAFT 9-44697
CRAFT 9-44698
CRAFT 9-44701
CRAFT 9-44702
CRAFT 9-44703
CRAFT 9-44704
CRAFT 9-44705
CRAFT 9-44706
CRAFT 9-44707
CRAFT 9-44708
CRAFT 9-44709
CRAFT 9-42909
CRAFT 9-42911
CRAFT 9-42912
CRAFT 9-42913
CRAFT 9-42914
CRAFT 9-42915
CRAFT 9-42916
CRAFT 9-42917
CRAFT 9-42918
CRAFT 9-42919
CRAFT 9-42924
CRAFT 9-42929
CRAFT 9-42925
CRAFT 9-42921
CRAFT 9-42937
CRAFT 9-42938
CRAFT 9-42922
CRAFT 9-42939
CRAFT 9-42923
CRAFT 9-42931
CRAFT 9-42932
CRAFT 9-42933
CRAFT 9-42934
CRAFT 9-42935
CRAFT 9-42936
Description
WR COMB 12PT 1/4
WR COMB 12PT 5/16
WR COMB 12PT 11/32
WR COMB 12PT 3/8
WR COMB 12PT 7/16
WR COMB 12PT 1/2
WR COMB 12PT 9/16
WR COMB 12PT 5/8
WR COMB 12PT 11/16
WR COMB 12PT 3/4
WR COMB 12PT 13/16
WR COMB 12PT 7/8
WR COMB 12PT 15/16
WR COMB 12PT 1
WR COMB 12PT 1-1/16
WR COMB 12PT 1-1/8
WR COMB 12PT 1-1/4
WR COMB 12PT 1-5/16
WR COMB 12PT 6MM
WR COMB 12PT 7MM
WR COMB 12PT 8MM
WR COMB 12PT 9MM
WR COMB 12PT 10MM
WR COMB 12PT 11MM
WR COMB 12PT 12MM
WR COMB 12PT 13MM
WR COMB 12PT 14MM
WR COMB 12PT 15MM
WR COMB 12PT 16MM
WR COMB 12PT 17MM
WR COMB 12PT 18MM
WR COMB 12PT 19MM
WR COMB 12PT 20MM
WR COMB 12PT 21MM
WR COMB 12PT 22MM
WR COMB 12PT 23MM
WR COMB 12PT 24MM
WR COMB 12PT 25MM
WR COMB 12PT 26MM
WR COMB 12PT 27MM
WR COMB 12PT 28MM
WR COMB 12PT 30MM
WR COMB 12PT 32MM
PartNo
CRAFT 9-45973
CRAFT 9-45974
CRAFT 9-45975
CRAFT 9-45976
CRAFT 9-45977
CRAFT 9-45978
CRAFT 9-45979
CRAFT 9-45980
CRAFT 9-45981
CRAFT 9-45982
CRAFT 9-45983
CRAFT 9-45984
CRAFT 9-45985
CRAFT 9-45950
CRAFT 9-45951
CRAFT 9-45952
CRAFT 9-45953
CRAFT 9-45954
CRAFT 9-45986
CRAFT 9-45987
CRAFT 9-45988
CRAFT 9-45989
CRAFT 9-45990
CRAFT 9-45991
CRAFT 9-45992
CRAFT 9-45993
CRAFT 9-45994
CRAFT 9-45995
CRAFT 9-45996
CRAFT 9-45997
CRAFT 9-45998
CRAFT 9-45955
CRAFT 9-45956
CRAFT 9-45957
CRAFT 9-45958
CRAFT 9-45959
CRAFT 9-45960
Description
WR COMB 12PT 1/4 FP
WR COMB 12PT 5/16 FP
WR COMB 12PT 3/8 FP
WR COMB 12PT 1/2 FP
WR COMB 12PT 5/8 FP
WR COMB 12PT 3/4 FP
WR COMB 12PT 7/8 FP
WR COMB 12PT 1 FP
WR COMB 12PT 1-1/16 FP
WR COMB 12PT 7MM FP
WR COMB 12PT 8MM FP
WR COMB 12PT 9MM FP
WR COMB 12PT 10MM FP
PartNo
CRAFT 9-44089
CRAFT 9-44103
CRAFT 9-44104
CRAFT 9-44105
CRAFT 9-44106
CRAFT 9-44107
CRAFT 9-44108
CRAFT 9-44109
CRAFT 9-44099
CRAFT 9-44100
CRAFT 9-44102
CRAFT 9-44110
CRAFT 9-44112
CRAFT 9-44113
CRAFT 9-44114
CRAFT 9-44115
CRAFT 9-44116
CRAFT 9-44117
CRAFT 9-44140
CRAFT 9-44118
CRAFT 9-44119
CRAFT 9-44120
CRAFT 9-44122
CRAFT 9-44124
CRAFT 9-44130
Description
WR COMB STBY 12PT 5/16 FP
WR COMB STBY 12PT 1 FP
WR COMB STBY 12PT 9MM FP
Wrenches
Combination Wrenches Six Point-Standard &
Metric
Combination Wrenches Twelve
Point-Standard & Metric
Phone: 402-455-6151
Toll Free: 800-488-9699
Combination Wrenches Twelve Point Stubby
Full Polish - Standard & Metric
375
Craftsman Tools
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Craftsman Tools
Wrenches
Combination Wrench Holder
Box End Wrench Set 12 point Ratcheting 25 Pc.
Offset Individual Wrenches – Standard & Metric
Unique design holds 12 wrenches securely in place. Fits inside a 2"H drawer
or mounts on wall. Holds wrenches 1/4" through 1" or 6mm through 25mm.
PartNo
CRAFT 9-65272
Description
ORG WR HOLDS 12 1/4-1
Box-End Wrench Set 11 Pc.
11 Wrenches • Plastic Pouch
PartNo
CRAFT 9-4985
CRAFT 9-4986
Description
SET WR BX 12 PT 11PC
SET WR BX 12PT 11PC MET
Box End Offset Wrench Set 12 Pc. Ratcheting
- Standard & Metric
PartNo
CRAFT 9-43361
CRAFT 9-43362
CRAFT 9-43363
CRAFT 9-43364
CRAFT 9-43365
CRAFT 9-43366
CRAFT 9-43367
CRAFT 9-43028
CRAFT 9-43368
CRAFT 9-43369
CRAFT 9-43053
CRAFT 9-43666
CRAFT 9-42161
CRAFT 9-42162
CRAFT 9-42163
CRAFT 9-42164
CRAFT 9-42165
CRAFT 9-42166
CRAFT 9-42109
CRAFT 9-42111
CRAFT 9-42171
CRAFT 9-42172
CRAFT 9-42173
CRAFT 9-42174
CRAFT 9-42175
Description
WR BX RAT OFF 12PT 1/4X5/16
WR BX RAT OFF 12P 11/16X7/8
WR BX RAT OFF 12PT 7X8MM
WR BX RAT 12PT 1/4X5/16
WR BX RAT 12 PT 1/2X9/16
WR BX RAT 12PT 1X1-1/8
WR BX RAT 12PT 1-1/8X1-1/4
WR BX RAT 12PT 7X8MM
Box End Wrenches 28 Pc. 12 Point
Standard/Metric
PartNo
CRAFT 9-43027
Description
SET WR BX RAT OFF 12PT 12PC
Box End Offset Wrench Set 12 Pc. Full Polish
Deep-Standard/Metric
PartNo
CRAFT 9-42962
Description
SET WR BX 12PT 28PC MET/SAE
Box End Wrench Set 3 Pc. Stubby
PartNo
CRAFT 9-46999
Description
SET WR BX OFF 12PT 12PC
Box End Wrench Set 12 Pc. Standard/Metric
Ratcheting
PartNo
CRAFT 9-42112
PartNo
CRAFT 9-44192
Description
SET WR BX RAT 12PT 12PC
Phone: 402-455-6151
Toll Free: 800-488-9699
3 Standard Wrenches • Four Color Carton
376
Description
SET WR BX SHT 12PT 3PC
Box End Wrench Set 5 Pc. Ratcheting
5 Wrenches
5 Wrenches
Wrenches
Box-End Wrench Set 5 Pc.
PartNo
CRAFT 9-43092
CRAFT 9-43093
Description
SET WR BX 12PT LRG 5PC
SET WR BX 12PT LRG 5PC MET
PartNo
CRAFT 9-42160
CRAFT 9-42170
Box End Wrench Set 5 Pc. Crownlock™
Ratcheting
5 Wrenches
PartNo
CRAFT 9-42380
CRAFT 9-42390
Description
SET WR BX RAT 12PT 5PC
SET WR BX RAT 12PT 5PC MET
Box End 7 Pc. 12 Point Standard
Open-End/Socket-End Combination Wrench
Set
Description
SET WR BX RAT C-LCK 12PT 5P
SET WR BX RAT LCK 12PT 5PC MET
Box End Wrench Set 5 Pc. Full Polish Deep
Offset Wrench Set
7 Standard Wrenches
PartNo
CRAFT 9-44095
Box End Wrench Set 7 Pc.
5 Wrenches • Four Color Carton
PartNo
CRAFT 9-44349
CRAFT 9-44350
Description
SET WR OE/SKT 7PC
Description
SET WR BX OFF 12PT 5PC
SET WR BX OFF 12PT 5PC MET
Box End Wrench Set 5 Pc. Offset Ratcheting
7 Wrenches • Four Color Carton
PartNo
CRAFT 9-44193
CRAFT 9-44194
Description
SET WR BX 12PT 7PC
SET WR BX 12PT 7PC MET
PartNo
CRAFT 9-43866
CRAFT 9-43864
CRAFT 9-43865
CRAFT 9-43919
CRAFT 9-43922
CRAFT 9-43921
CRAFT 9-43923
CRAFT 9-43924
CRAFT 9-43925
Description
WR BX SHT 3/8X7/16
WR BX SHT 1/2X9/16
WR BX SHT 5/8X3/4
WR BX 12PT 1/4X5/16
WR BX 12PT 3/8X7/16
WR BX 12PT 7/16X1/2
WR BX 12PT 1/2X9/16
WR BX 12PT 9/16X5/8
WR BX 12PT 9/32X25/32
Box End Wrenches - Standard & Metric
5 Wrenches
PartNo
CRAFT 9-43375
CRAFT 9-43376
Description
SET WR BX RAT OFF 12PT 5PC MET
SET WR BX RAT OFF 12PT 5PC
Phone: 402-455-6151
Toll Free: 800-488-9699
377
Craftsman Tools
Sockets, Ratchets,
Rachets, Wrenches
Sockets,
Wrenches
Sockets,
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Box End Standard Obstruction Wrench
Craftsman Tools
Wrenches
Box End Wrenches - Standard & Metric
PartNo
CRAFT 9-43926
CRAFT 9-43927
CRAFT 9-43928
CRAFT 9-43929
CRAFT 9-43934
CRAFT 9-43935
CRAFT 9-43936
CRAFT 9-42952
CRAFT 9-42953
CRAFT 9-42954
CRAFT 9-42956
CRAFT 9-42957
CRAFT 9-42961
CRAFT 9-42958
CRAFT 9-42965
CRAFT 9-42966
CRAFT 9-42959
CRAFT 9-44962
CRAFT 9-44963
CRAFT 9-44965
CRAFT 9-44966
CRAFT 9-44967
Use in confined areas, starters, manifolds. 12pt. openings, 9/16" x 5/8". 71/4"
long.
Description
WR BX 12PT 5/8X3/4
WR BX 12PT 11/16X13/16
WR BX 12PT 3/4X7/8
WR BX 12PT 15/16X1
WR BX 12PT 1-1/16X1-1/4
WR BX 12PT 1-1/8X1-5/16
WR BX 12PT 1-7/16X1-1/2
WR BX 12PT 6X8MM
WR BX 12PT 7X9MM
WR BX 12PT 10X11MM
WR BX 12PT 12X14MM
WR BX 12PT 13X15MM
WR BX 12PT 16X18MM
WR BX 12PT 17X19MM
WR BX 12PT 20X22MM
WR BX 12PT 21X23MM
WR BX 12PT 22X24MM
WR BX OFF DP 12PT 24X26MM
PartNo
CRAFT 9-4376
Open End Wrench Set 14 Pc. - Roll Up Pouch
14 Wrenches • Roll Up Pouch
PartNo
CRAFT 9-43075
CRAFT 9-43076
Box End Combination Open End/Socket End
Wrenches
Standard Wrenches
PartNo
Standard Wrenches
CRAFT 9-42544
CRAFT 9-42541
CRAFT 9-42542
CRAFT 9-42543
CRAFT 9-42545
CRAFT 9-42547
CRAFT 9-42546
Description
WR BX OBSTRCTN 12P 9/16X5/8
Description
SET WR OE 14PC
SET WR OE 14PC MET
Open End Wrench Set 28 Pc. Standard/Metric
Description
WR COMB FLX HD 12PT 3/8
Box End CrownLock™ 12 Point Flat Style
Ratcheting Individual Wrenches-Standard &
Metric
PartNo
CRAFT 9-42381
CRAFT 9-42382
CRAFT 9-42383
CRAFT 9-42384
CRAFT 9-42385
CRAFT 9-42391
CRAFT 9-42392
CRAFT 9-42393
CRAFT 9-42394
CRAFT 9-42395
Description
WR BX RAT CSTP 12P 1/4X5/16
WR BX RAT CSTP 12PT 5/8X3/4
WR BX RAT CSTP 12PT 7/8X 11/16
WR BX RAT CSTP 12PT 7X8MM
PartNo
CRAFT 9-44316
CRAFT 9-44317
CRAFT 9-44318
CRAFT 9-44319
CRAFT 9-44320
CRAFT 9-44360
CRAFT 9-44361
CRAFT 9-44362
CRAFT 9-44364
CRAFT 9-44366
CRAFT 9-44367
CRAFT 9-44368
Description
WR BX OFF DP 12PT 3/8X7/16
WR BX OFF DP 12PT 13/16X 15/16
PartNo
CRAFT 9-42955
Description
SET WR OE 28PC MET/SAE
Open End Wrench Set 32 Pc. 12 Point
Standard/Metric Combination and Ignition
Wrench Set
Box End Full-Polish Deep Offset Wrenches Standard & Metric
Phone: 402-455-6151
Toll Free: 800-488-9699
11 Standard Combination Wrenches • 11 Metric Combination Wrenches • 5
Standard Ignition Combination Wrenches • 5 Metric Ignition Combination
Wrenches • Blow Molded Case
PartNo
CRAFT 9-46937
378
Description
SET WR COMB IGNIT 32PC MET/ SAE
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Open End Wrench Set 9 Pc.
Wrenches
Open End 4 Pc. Standard/Metric Ignition
Wrench Set
PartNo
CRAFT 9-43047
Description
Open End Wrench Set 5 Pc. Large Size
Description
SET WR OE 9PC
SET WR OE 9PC MET
PartNo
CRAFT 9-46960
CRAFT 9-46961
CRAFT 9-46962
CRAFT 9-46963
CRAFT 9-46964
CRAFT 9-46965
CRAFT 9-46966
Description
WR OE 1/4X5/16 BLK
WR OE 3/8X7/16 BLK
WR OE 1/2X9/16 BLK
WR OE 5/8X3/4 BLK
WR OE 11/16X13/16 BLK
WR OE 3/4X7/8 BLK
WR OE 15/16X1 BLK
Open End Wrenches Industrial Finish
Standard
Open End Ignition Wrenches-Standard &
Metric
PartNo
CRAFT 9-43090
CRAFT 9-43091
Description
SET WR OE LRG 5PC
SET WR OE LRG 5PC MET
PartNo
CRAFT 9-46967
Description
SET WR OE 7PC BLK
Open End Wrench Set 7 Pc. Industrial Finish
Standard
PartNo
CRAFT 9-43101
CRAFT 9-43102
CRAFT 9-43103
CRAFT 9-43104
CRAFT 9-43105
CRAFT 9-43106
CRAFT 9-43107
CRAFT 9-43108
CRAFT 9-44524
CRAFT 9-44551
CRAFT 9-44552
CRAFT 9-44553
CRAFT 9-44554
CRAFT 9-44555
CRAFT 9-44556
CRAFT 9-44557
Description
WR OE IGNIT 7/32
WR OE IGNIT 15/64
WR OE IGNIT 1/4
WR OE IGNIT 9/32
WR OE IGNIT 5/16
WR OE IGNIT 11/32
WR OE IGNIT 3/8
WR OE IGNIT 7/16
WR OE IGNIT 5MM
WR OE IGNIT 5.5MM
WR OE IGNIT 6MM
WR OE IGNIT 7MM
WR OE IGNIT 8MM
WR OE IGNIT 9MM
WR OE IGNIT 10MM
WR OE IGNIT 11MM
Open End Ignition Wrench Set 8 Pc.
PartNo
CRAFT 9-44778
CRAFT 9-4308
Hand Tools That
Yield the Results
You Demand!
Description
SET WR OE IGNIT 8PC
SET WR OE IGNIT 8PC MET
Phone: 402-455-6151
Toll Free: 800-488-9699
379
Craftsman Tools
4 Standard Box End Ignition Wrenches • 8 Standard Open End Ignition
Wrenches • 10 Standard Comb. Ignition Wrenches • 4 Metric Box End
Ignition Wrenches • 8 Metric Open End Ignition Wrenches • 10 Metric Comb.
Ignition Wrenches
PartNo
CRAFT 9-4452
CRAFT 9-4293
Specialty Wrench Set 30 Pc. Standard/Metric
Craftsman Tools
Wrenches
Open End Wrenches-Standard & Metric
PartNo
CRAFT 9-44571
CRAFT 9-44572
CRAFT 9-44579
CRAFT 9-44592
CRAFT 9-44581
CRAFT 9-44582
CRAFT 9-44591
CRAFT 9-44584
CRAFT 9-44583
CRAFT 9-44585
CRAFT 9-44586
CRAFT 9-44587
CRAFT 9-44588
CRAFT 9-44589
CRAFT 9-44502
CRAFT 9-44503
CRAFT 9-44504
CRAFT 9-44506
CRAFT 9-44507
CRAFT 9-44521
CRAFT 9-44508
CRAFT 9-44522
CRAFT 9-44523
CRAFT 9-44509
CRAFT 9-44515
CRAFT 9-44516
CRAFT 9-44518
CRAFT 9-44519
Description
WR OE 1/4X5/16
WR OE 3/8X7/16
WR OE 1/2X9/16
WR OE 5/8X9/16
WR OE 19/32X11/16
WR OE 5/8X3/4
WR OE 11/16X13/16
WR OE 3/4X7/8
WR OE 25/32X13/16
WR OE 15/16X1
WR OE 1-1/16X1-1/8
WR OE 1-1/4X1-5/16
WR OE 1-3/8X1-7/16
WR OE 1-1/2X1-5/8
WR OE 6X8MM
WR OE 7X9MM
WR OE 10X11MM
WR OE 12X14MM
WR OE 13X15MM
WR OE 16X18MM
WR OE 17X19MM
WR OE 20X22MM
WR OE 21X23MM
WR OE 22X24MM
WR OE 24X26MM
WR OE 25X27MM
WR OE 28X30MM
WR OE 30X32MM
3 Standard Short Box-End Wrenches • 4 Standard Flare Nut Wrenches • 4
Metric Flare Nut Wrenches • 4 Standard F.P. Deep Offset B.E. Wrenches • 3
Metric F.P. Deep Offset B.E. Wrenches • 7 Standard Open End Socket End
Wrenches • 4 Standard Tappet Wrenches • 1 Standard Obstrucion Wrench
PartNo
CRAFT 9-46957
Description
SET WR SPECIALTY 30PC MET/ SAE
Specialty Wrench Set 4 Pc. Standard Flare Nut
Specialty Tool Bag 21 Pocket-Black
PartNo
CRAFT 9-44565
Description
SET WR FLR NUT4PC
Specialty Wrench Set 5 Pc. Full Polish Flare
Nut
Constructed of rugged 600 dernier polyester. 12 outside pockets and 9 inside
pockets hold and organize a variety of tools. Tools not included.
PartNo
CRAFT 9-40412
Description
BAG TL WD MTH 12IN
PartNo
CRAFT 9-42012
CRAFT 9-42013
Call to Discuss Our
800-488-9699
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET WR FLR NUT 5PC FP
SET WR FLR NUT 5PC FP MET
800-488-9699
380
Sockets,
Wrenches
Sockets, Ratchets,
Rachets, Wrenches
Wrenches
Specialty Wrench Set 5 Pc. Metric Flare Nut
PartNo
CRAFT 9-44175
CRAFT 9-44176
CRAFT 9-44177
CRAFT 9-44178
CRAFT 9-44170
CRAFT 9-44179
Description
WR FLR NUT 6PT 9X11MM
PartNo
CRAFT 9-44475
CRAFT 9-44471
CRAFT 9-44472
CRAFT 9-44473
CRAFT 9-44474
Description
WR TAPPET 3/8X7/16
WR TAPPET 7/16X17/32
WR TAPPET 1/2X9/16
WR TAPPET 5/8X11/16
WR TAPPET 3/4X7/8
PartNo
CRAFT 9-50475
Description
SET WR ADJ BEAK 3PC
PartNo
CRAFT 9-44015
Description
SET WR ADJ CUSH GRP 3PC
PartNo
CRAFT 9-44713
CRAFT 9-44714
CRAFT 9-44715
Description
WR ADJ BEAK 6
WR ADJ BEAK 8
WR ADJ BEAK 10
Specialty-Standard Tappet Wrenches
PartNo
CRAFT 9-44566
Description
SET WR FLR NUT 5PC MET
Specialty Wrench Set 5 Pc. Standard Tappet
Adjustable Wrench Set3 Pc. Cushion Grip
Adjustable Beak Jaw Wrenches
PartNo
CRAFT 9-44453
Description
SET WR TAPPET 5PC
Specialty 54 Pocket Bucket Tool Organizer
Adjustable Wrench Sets
3 Pc. Adjustable Wrench Set • 3 Pc. Large Size Adjustable Wrench Set • 2 Pc.
Adjustable Wrench Set •
5 Pc. Adjustable Wrench Set
Professional all-purpose tool organizer. Waterproof, tear & abrasion resistant.
Fits standard 5-gal. buckets 38 outside and 16 inside pockets. Covered pocket
for cell phone, hammer loop, drill
pocket. Tools not included.
PartNo
CRAFT 9-40664
Description
STRG TL BUCKET WRP 39 PKT
PartNo
CRAFT 9-44174
CRAFT 9-44171
CRAFT 9-44173
CRAFT 9-44172
Metric Wrenches
Description
WR FLR NUT 6PT 3/8X7/16
Specialty Flare Nut Wrenches - Standard &
Metric
Phone: 402-455-6151
Toll Free: 800-488-9699
381
PartNo
CRAFT 9-44664
CRAFT 9-44916
CRAFT 9-44651
CRAFT 9-44036
Description
SET WR ADJ 3PC
SET WR ADJ LRG 3PC
SET WR ADJ LRG 2PC
SET WR ADJ 5PC
Adjustable Wrenches
PartNo
CRAFT 9-44601
CRAFT 9-44602
CRAFT 9-44603
CRAFT 9-44604
CRAFT 9-44605
CRAFT 9-44662
CRAFT 9-44606
CRAFT 9-44608
Description
WR ADJ 4
WR ADJ 6
WR ADJ 8
WR ADJ 10
WR ADJ 12
WR ADJ 15
WR ADJ 18
WR ADJ 24
Craftsman Tools
Adjustable Wrench Set 3 Pc. Beak Jaw
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Hex Key Set 11 Pc. Standard Short Arm Set
with Caddy
Craftsman Tools
Wrenches
Adjustable Wrenches Cushion Grip
PartNo
CRAFT 9-44166
CRAFT 9-44167
CRAFT 9-44168
CRAFT 9-44169
Description
WR ADJ CUSH GRP 6
WR ADJ CUSH GRP 8
WR ADJ CUSH GRP 10
WR ADJ CUSH GRP 12
Includes .050", 1/16", 5/64", 3/32", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16" and
3/8" sizes.
PartNo
CRAFT 9-46813
Adjustable Wrench Sets Industrial Finish
Hex Key Set 13 Pc. Metric Ball End
3 Pc. Large Size Industrial Finish Adjustable Wrench Set
5 Pc. Industrial Finish Adjustable Wrench Set
PartNo
CRAFT 9-44652
CRAFT 9-800212
Description
SET WR ADJ LRG 3PC BLK
SET WR ADJ 5PC BLK
PartNo
CRAFT 9-4450
CRAFT 9-4451
CRAFT 9-4459
CRAFT 9-4453
CRAFT 9-4454
CRAFT 9-4455
CRAFT 9-4456
CRAFT 9-4457
Description
WR ADJ 4 BLK
WR ADJ 6 BLK
WR ADJ 8 BLK
WR ADJ 10 BLK
WR ADJ 12 BLK
WR ADJ 15 BLK
WR ADJ 18 BLK
WR ADJ 24 BLK
Includes 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10mm long arm sizes.
Plastic Case
PartNo
CRAFT 9-46755
Hex Key Set 10 Pc. Standard Cushion Grip
T-Handle
Includes Standard sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4",
5/16", and 3/8".
Description
SET THDL HEX CUSH 10PC MET/ SAE
Hex Key Set 11 Pc. Metric Long Arm Set with
Caddy
Includes 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7 and 8mm sizes.
PartNo
CRAFT 9-46812
Description
SET KEY HEX LNG 11PC MET
Hex Key Set 11 Pc. Metric Short Arm Set with
Caddy
Includes 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7 and 8mm sizes.
PartNo
CRAFT 9-46814
Description
SET KEY HEX SHT 11PC MET
Hex Key Set 11 Pc. Standard Long Arm Set
with Caddy
Includes .050", 1/16", 5/64", 3/32", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16" and
3/8" sizes.
PartNo
CRAFT 9-46811
Description
SET KEY HEX LNG 11PC
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET KEY HEX BP LNG 13PC MET
Hex Key Set 13 Pc. Standard Ball End
Adjustable Wrenches Industrial Finish
PartNo
CRAFT 9-46277
Description
SET KEY HEX SHT 11PC
382
Includes .050, 1/16" 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4",
5/16", 3/8" long arm sizes. Plastic Case
PartNo
CRAFT 9-46754
Description
SET KEY HEX BP LNG 13PC
Hex Key Set 14 Pc. Metric Short and Long Arm
Set
Includes: 1.5, 2, 2.5, 3, 4, 4.5, 5mm short-arm sizes; 1.5, 2.5, 3, 4, 5, 6, 7mm
long-arm sizes, pouch.
PartNo
CRAFT 9-46684
Description
SET KEY HEX SHT LNG 14P MET
Hex Key Set 14 Pc. Standard Short and Long
Arm Set
Includes: .050", 1/16", 5/64", 3/32", 7/64", 9/64" short-arm sizes; 7/64", 1/8",
9/64", 5/32", 3/16", 7/32", 1/4", 5/16" long-arm sizes, pouch.
PartNo
CRAFT 9-46683
Description
SET KEY HEX SHT LNG 14PC
Visit Us At
www.johnday.com
Sockets,
Wrenches
Sockets, Ratchets,
Rachets, Wrenches
Wrenches
End Hex Key Set 14 Pc. Standard/Metric Ball
Hex Key Set 20 Pc. Standard Short and Long
Arm Set
PartNo
CRAFT 9-46696
Description
SET KEY HEX SHT LNG 20PC
Hex Key Set 3 Pc. Folding
Includes 9-46701, 9-46702 and 9-46703.
Includes 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16" standard long arm and 2,
2.5, 3, 4, 5, 6, 8mm metric long arm sizes.
PartNo
CRAFT 9-46756
PartNo
CRAFT 9-46705
Description
SET KEY HEX/TORX FOLD SAE/ MET
Hex Key Set 7 Blade Folding Torx®
Description
SET KEY HEX BP LNG 14PC SAEMET
Hex Key Set 18 Pc. Standard/Metric Cushion
Grip T-Handle
Includes T10, T15, T20, T25, T27, T30 and T40 sizes.
PartNo
CRAFT 9-46703
Description
SET KEY TORX FOLD 7KEY
Hex Key Set 8 Blade Metric Folding
Includes Standard sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4",
5/16", and 3/8"; and Metric sizes: 2, 2.5, 3, 4, 5, 6, 8, and 10mm.
PartNo
CRAFT 9-46288
Description
SET THDL HEX CUSH 18PC
Hex Key Set 2 Pc. High Visibility Folding
Includes 1.5, 2, 2.5, 3, 4, 5, 6 and 8mm sizes.
PartNo
CRAFT 9-46702
Hex Key Set 8 Pc. Metric Cushion Grip
T-Handle
Includes Metric sizes: 2, 2.5, 3, 4, 5, 6, 8, and 10mm.
PartNo
CRAFT 9-46278
Includes 9 blade Standard set (5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16",
7/32" and 1/4" sizes) and 8 blade Metric Set (1.5, 2, 2.5, 3, 4, 5, 6 and 8mm
sizes).
PartNo
CRAFT 9-46704
Description
SET KEY HEX FOLD 8KEY MET
Description
SET THDL HEX CUSH 8PC MET
Hex Key Set 9 Blade Standard Folding
Description
SET KEY HEX FOLD 2P SAE/MET
Hex Key Set 20 Pc. Metric Short and Long Arm
Set
Includes: 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8mm short-arm sizes: 1.5, 2, 2.5, 3,
4, 4.5, 5, 5.5, 6mm long-arm sizes; pouch.
PartNo
CRAFT 9-46677
Description
SET KEY HEX SHT LNG 20P MET
Phone: 402-455-6151
Toll Free: 800-488-9699
Includes 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" and 1/4" sizes.
PartNo
CRAFT 9-46701
383
Description
SET KEY HEX FOLD 9KEY
Craftsman Tools
Includes: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32"
and 1/4" short-arm sizes; 5/64" 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32"
and 1/4" long-arm sizes; pouch.
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Craftsman Tools
Wrenches
Hex Key Cushion Grip T-Handles - Standard &
Metric
PartNo
CRAFT 9-46540
CRAFT 9-46541
CRAFT 9-46542
CRAFT 9-46547
CRAFT 9-46543
CRAFT 9-46544
CRAFT 9-46545
CRAFT 9-46546
CRAFT 9-46548
CRAFT 9-46549
CRAFT 9-46557
CRAFT 9-46550
CRAFT 9-46551
CRAFT 9-46552
CRAFT 9-46553
CRAFT 9-46554
CRAFT 9-46555
CRAFT 9-46556
Description
THDL HEX CUSH 3/32
THDL HEX CUSH 7/64
THDL HEX CUSH 1/8
THDL HEX CUSH 9/64
THDL HEX CUSH 5/32
THDL HEX CUSH 3/16
THDL HEX CUSH 7/32
THDL HEX CUSH 1/4
THDL HEX CUSH 5/16
THDL HEX CUSH 3/8
THDL HEX CUSH 2MM
THDL HEX CUSH 2.5MM
THDL HEX CUSH 3MM
THDL HEX CUSH 4MM
THDL HEX CUSH 5MM
THDL HEX CUSH 6MM
THDL HEX CUSH 8MM
THDL HEX CUSH 10MM
Hex Keys Long Arm Ball End - Standard &
Metric
PartNo
CRAFT 9-46757
CRAFT 9-46758
CRAFT 9-46759
CRAFT 9-46760
CRAFT 9-46761
CRAFT 9-46762
CRAFT 9-46763
CRAFT 9-46764
CRAFT 9-46765
CRAFT 9-46766
CRAFT 9-46767
CRAFT 9-46768
CRAFT 9-46769
CRAFT 9-46740
CRAFT 9-46741
CRAFT 9-46742
CRAFT 9-46743
CRAFT 9-46744
CRAFT 9-46745
CRAFT 9-46746
CRAFT 9-46747
CRAFT 9-46748
CRAFT 9-46749
CRAFT 9-46750
CRAFT 9-46751
CRAFT 9-46752
Description
KEY HEX BP LNG .050
KEY HEX BP LNG 1/16
KEY HEX BP LNG 5/64
KEY HEX BP LNG 3/32
KEY HEX BP LNG 7/64
KEY HEX BP LNG 1/8
KEY HEX BP LNG 9/64
KEY HEX BP LNG 5/32
KEY HEX BP LNG 3/16
KEY HEX BP LNG 7/32
KEY HEX BP LNG 1/4
KEY HEX BP LNG 5/16
KEY HEX BP LNG 3/8
KEY HEX BP LNG 1.5MM
KEY HEX BP LNG 2MM
KEY HEX BP LNG 3MM
KEY HEX BP LNG 4MM
KEY HEX BP LNG 5MM
KEY HEX BP LNG 6MM
KEY HEX BP LNG 7MM
KEY HEX BP LNG 8MM
KEY HEX BP LNG 9MM
KEY HEX BP LNG 10MM
Phone: 402-455-6151
Toll Free: 800-488-9699
Straight Hex Keys - Standard & Metric
Short Arm • Long Arm
PartNo
CRAFT 9-28131
CRAFT 9-28132
CRAFT 9-28133
CRAFT 9-28134
CRAFT 9-28182
CRAFT 9-28135
CRAFT 9-28181
CRAFT 9-28136
CRAFT 9-28137
CRAFT 9-28138
CRAFT 9-28139
CRAFT 9-28161
CRAFT 9-28171
CRAFT 9-28185
CRAFT 9-28172
CRAFT 9-28186
CRAFT 9-28173
CRAFT 9-28174
CRAFT 9-28175
CRAFT 9-28176
CRAFT 9-28177
CRAFT 9-28178
CRAFT 9-28179
CRAFT 9-46651
CRAFT 9-46601
CRAFT 9-46602
CRAFT 9-46603
CRAFT 9-46604
CRAFT 9-46652
CRAFT 9-46605
CRAFT 9-46653
CRAFT 9-46606
CRAFT 9-46654
CRAFT 9-46655
CRAFT 9-46667
CRAFT 9-46622
CRAFT 9-46611
CRAFT 9-46612
CRAFT 9-46613
CRAFT 9-46614
CRAFT 9-46623
CRAFT 9-46615
CRAFT 9-46624
CRAFT 9-46616
CRAFT 9-46617
CRAFT 9-46618
CRAFT 9-46621
CRAFT 9-46666
Description
KEY HEX SHT .050
KEY HEX SHT 1/16
KEY HEX SHT 5/64
KEY HEX SHT 3/32
KEY HEX SHT 7/64
KEY HEX SHT 1/8
KEY HEX SHT 9/64
KEY HEX SHT 5/32
KEY HEX SHT 3/16
KEY HEX SHT 7/32
KEY HEX SHT 1/4
KEY HEX LNG 5/64
KEY HEX LNG 3/32
KEY HEX LNG 7/64
KEY HEX LNG 1/8
KEY HEX LNG 9/64
KEY HEX LNG 5/32
KEY HEX LNG 3/16
KEY HEX LNG 7/32
KEY HEX LNG 1/4
KEY HEX LNG 5/16
KEY HEX LNG 3/8
KEY HEX LNG 1/2
KEY HEX SHT 1.5MM
KEY HEX SHT 2MM
KEY HEX SHT 2.5MM
KEY HEX SHT 3MM
KEY HEX SHT 4MM
KEY HEX SHT 4.5MM
KEY HEX SHT 5MM
KEY HEX SHT 5.5MM
KEY HEX SHT 6MM
KEY HEX SHT 7MM
KEY HEX SHT 8MM
KEY HEX LNG 12MM
KEY HEX LNG 1.5MM
KEY HEX LNG 2MM
KEY HEX LNG 2.5MM
KEY HEX LNG 3MM
KEY HEX LNG 4MM
KEY HEX LNG 4.5MM
KEY HEX LNG 5MM
KEY HEX LNG 5.5MM
KEY HEX LNG 6MM
KEY HEX LNG 7MM
KEY HEX LNG 8MM
KEY HEX LNG 10MM
KEY HEX LNG 17MM
½” Sq. Dr. Tire Torque Wrenches
Accurate to ±3% clockwise in the upper 80% range. Chrome finish is stamped
in the English and Metric scales. Micrometer-type setting adjusts from 30 to
250 ft./lbs. in 1 ft./lbs. gradations (47.45 to 345.68 Newton/meters) with only
8° hand travel. Round head design has protective rubber cover. Steel lock ring
has a heavy-duty lock mechanism.
PartNo
CRAFT 9-44600
CRAFT 9-800470
384
Description
WR TORQ 1/2DR TIRE
WR TRQ 9-44600 CERT
Sockets, Rachets,
Ratchets,Wrenches
Wrenches
Sockets,
Hand Tools
Wrenches
Torque Wrenches Beam-Type
Pliers and Snips
Plier Set 2 Pc.
PartNo
CRAFT 9-44690
CRAFT 9-44642
Description
WR TORQ 3/8DR 0-75FPT
Includes: •9-45378 6-3/4" Slip Joint • 9-45381 9-1/2" Tongue & Groove
PartNo
CRAFT 9-45415
Description
SET PLR 2PC
Plier Set 2 Pc. Tongue & Groove
Torque Wrenches-Digitork®
Mechanical digital readouts for English and Metric scales; accurate to ±3% in
both directions. Ball bearing release mechanism for greater accuracy.
Comfortable grip. Stays calibrated longer than conventional torque wrenches.
Also measures in Newton meters.
PartNo
CRAFT 9-44596
CRAFT 9-44597
CRAFT 9-800468
CRAFT 9-800469
Description
WR TRQ 9-44596 CERT
WR TRQ 9-44597 CERT
Torque Wrenches-Microtork®
Includes: •9-45385 7" Tongue & Groove • 9-45381 9-1/2" Tongue & Groove
PartNo
CRAFT 9-45410
To use, simply turn handle to set torque, twist ring to lock/unlock setting.
Micrometer-style scale. Torque accurate to ±4% clockwise, ±6%
counterclockwise. Comfortable textured plastic handles.
PartNo
CRAFT 9-44593
CRAFT 9-44594
CRAFT 9-44595
CRAFT 9-800465
CRAFT 9-800466
CRAFT 9-800467
Description
SET PLR 2PC
Plier Set 3 Pc. Large Tongue & Groove
Description
WR TRQ 9-44593 CERT
WR TRQ 9-44594
WR TRQ 9-44595 CERT
Torque Wrench Molded Carrying Cases
Includes: •9-45381 9-1/2" Large Tongue & Groove • 9-45386 13" Large
Tongue & Groove • 9-45384 16" Large Tongue & Groove
PartNo
CRAFT 9-45439
Description
SET PLR ARC JNT LRG 3PC
Plier Set 3 Pc. Long Reach
Includes: •9-45372-11" Duckbill • 9-45374-11" Long Nose • 9-45373-11"
Bent Nose
Red color. Wrench not included.
PartNo
CRAFT 9-44026
CRAFT 9-44027
CRAFT 9-44024
CRAFT 9-44025
PartNo
CRAFT 9-45370
Description
CASE WR TORQ
CASE WR TORQ
CASE WR TORQ
CASE WR TORQ
Phone: 402-455-6151
Toll Free: 800-488-9699
385
Description
SET PLR LNG RCH 3PC
Craftsman Tools
Separate English and Metric scales. Graduated indicator tip offers line-on-line
reading to help eliminate parallax error. Torque accurate to ±4%. Nylon
handle pivots for best work angle. Guide charts. Also measures in Newton
meters.
Hand Tools
Plier Set 4 Pc.
Craftsman Tools
Pliers and Snips
Plier Set 3 Pc.
Includes: •9-45102-6" Long Nose • 9-45378-6-3/4" Slip Joint • 9-45385-7"
Tongue & Groove
PartNo
CRAFT 9-45007
CRAFT 9-45243
CRAFT 9-45285
Description
SET PLR 3PC
SET PLR 3PC
SET PLR 3PC
Includes: • 9-45076 7" Diagonal • 9-45103 8" Long Nose • 9-45378 6-3/4"
Slip Joint • 9-45381 9-1/2" Tongue & Groove
PartNo
CRAFT 9-45235
Description
SET PLR 4PC
Plier Set 6 Pc.
Plier Set 3 Pc. Slip Joint
9-45441 Includes: • 9-45378 6-3/4" Slip Joint • 9-45093 7" Linesman • 945074 7" Wide Jaw Diag • 9-45103 8" Long Nose • 9-45087 8" Duckbill • 945381 9-1/2" Tongue & Groove
9-2923 (not shown) Includes: • 9-45076 7" Diagonal • 9-45103 8" Long Nose
• 9-47378 6-3/4" Slip Joint • 9-45094 8-1/2" Linesman • 9-45379 8" Slip Joint
• 9-45381 9-1/2" Arc Joint • Case
Includes: • 9-45378-6-3/4" • 9-45380-10" • 9-45379-8"
PartNo
CRAFT 9-45233
Description
SET PLR SLP JNT 3PC
PartNo
CRAFT 9-2923
Plier Set 3 Pc. Tongue & Groove
Description
SET PLR 6PC PORT CASE
Plier Sets 6 Pc.
9-45441 Includes: • 9-45378 6-3/4" Slip Joint • 9-45093 7" Linesman • 945074 7" Wide Jaw Diag • 9-45103 8" Long Nose • 9-45087 8" Duckbill • 945381 9-1/2" Tongue & Groove
Includes: • 9-45385 7" Tongue & Groove • 9-45381 9-1/2" Tongue & Groove 9-2923 (not shown) Includes: • 9-45076 7" Diagonal • 9-45103 8" Long Nose
• 9-45386 13" Tongue & Groove
• 9-47378 6-3/4" Slip Joint • 9-45094 8-1/2" Linesman • 9-45379 8" Slip Joint
• 9-45381 9-1/2" Arc Joint • Case
PartNo
CRAFT 9-45293
Description
SET PLR ARC JNT 3PC
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-45441
386
Description
SET PLR 6PC
Hand Tools
Bent-Nose Pliers
Pliers and Snips
Plier Set 8 Pc. Solid Joint
PartNo
CRAFT 9-45104
Description
PLR LNG RCH BNT NSE 6
PartNo
CRAFT 9-45077
CRAFT 9-45075
CRAFT 9-45076
Description
PLR DIAG CUT 5
PLR DIAG CUT 6
PLR DIAG CUT WIDE JAW 7
Diagonal-Cutting Pliers
Duckbill Pliers
Includes: • 6" Diagonal • 6" Long Nose • 7" Diagonal • 8" Long Nose • 8"
Long Reach • 6" Bent Long Nose • 8" Duckbill • 7" Linesman
PartNo
CRAFT 9-45429
Description
SET PLR SOLID JNT 8PC
Long Neck Bent Nose Pliers 11”
8" long. Black handles.
Long Neck Duckbill Pliers 11”
End-Cutting Nipper
PartNo
CRAFT 9-45373
Description
PLR LNG RCH BNT NSE 11
PartNo
CRAFT 9-45372
Description
PLR LNG RCH DKBL 11
PartNo
CRAFT 9-45087
Long Neck Long Nose Pliers 11”
Vinyl grips. 7".
PartNo
CRAFT 9-45326
PartNo
CRAFT 9-45374
Description
PLR LNG RCH DKBL 8
Description
PLR END-CUT NIPPER 7
Heavy Duty Fence Tool
Description
PLR LNG RCH LNG NSE 11
Bent Wide-Jaw Diagonal-Cutting Pliers
7" long for leverage and cutting of steel wire. Black handles.
PartNo
CRAFT 9-45084
2 staple grips in nose. Vinyl grips. 10".
PartNo
CRAFT 9-45325
Description
PLR DIAG CUT BNT JAW 7
Phone: 402-455-6151
Toll Free: 800-488-9699
387
Description
PLR FENCE TOOL 10
Craftsman Tools
For hard-to-reach areas. 6" long.
Hand Tools
Slip-Joint Pliers with Wire-Cutting Slot
Pliers and Snips
Craftsman Tools
Heavy-Duty Wide-Jaw Diagonal-Cutting Pliers
Black handles.
PartNo
CRAFT 9-45378
CRAFT 9-45379
CRAFT 9-45380
Tongue & Groove Pliers
7" long for leverage and easy cutting. Black handles.
PartNo
CRAFT 9-45074
Description
PLR SLP JNT 6-3/4
PLR SLP JNT 8
PLR SLP JNT 10
Description
PLR DIAG CUT 7
Linesman Pliers
Black handles.
Black handles.
PartNo
CRAFT 9-45093
CRAFT 9-45094
PartNo
CRAFT 9-45384
CRAFT 9-45386
CRAFT 9-45381
CRAFT 9-45385
Description
PLR ARC JNT 16
PLR ARC JNT 13
PLR ARC JNT 9-1/2
PLR ARC JNT 7
Professional Pliers
Plier Set 3 Pc.
Description
PLR LNMN 7
PLR LNMN 8-1/2
Long Reach Long Nose Pliers
For hard to reach areas. 8" long. Black handles.
PartNo
CRAFT 9-45085
Description
Long-Nose Pliers
Specialized alloy steel for extra toughness. Double-wall textured cushion
grips and the thumb stops on the solid-joint pliers afford you a firm,
comfortable grip. Clear-coated for excellent rust, corrosion protection.
Includes: • 9-45574 7" Wide Jaw Diag • 9-45582 8" Long Nose • 9-45481 91/2" Tongue & Groove
PartNo
CRAFT 9-45773
Lets you form wire loops, grip tiny pieces with the tapered jaws. Side cutter.
Black handles.
PartNo
CRAFT 9-45102
CRAFT 9-45103
Description
SET PLR 3PC PRO
Plier Set 4 Pc.
Description
PLR LNG RCH LNG NSE 6-1/2
Specialized alloy steel for extra toughness. Double-wall textured cushion
grips and the thumb stops on the solid-joint pliers afford you a firm,
comfortable grip. Clear-coated for excellent rust, corrosion protection.
Includes: • 9-45478 6-3/4" Slip Joint • 9-45481 9-1/2" Tongue & Groove • 945582 8" Long Nose • 9-45574 7" Wide Jaw Diag
Call John Day Company at
800-488-9699 for your
Tool Crib Management and
Vending Solutions
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 34-73634
CRAFT 9-45774
388
Description
SET PLR 4PC W/ WIRE STRPR
SET PLIERS 4PC
Hand Tools
Diagonal Cutting Pliers 6”
Pliers and Snips
Professional Pliers
Plier Set 5 Pc.
Description
PLR DIAG CUT 6 PRO
Diagonal Cutting Pliers 7” Wide Jaw
Includes: • 9-45760 6-3/4" Slip Joint • 9-45762 6" Diagonal • 9-45765 7"
Wide Jaw Diag • 9-45761 9-1/2" Tongue & Groove • 9-45763 8" Long Nose
PartNo
CRAFT 9-50471
Description
SET PLIERS 5PC
Slip Joint Pliers 6 3/4”
PartNo
CRAFT 9-45760
Spring loaded handles. Semi-flush cutting edge.
PartNo
CRAFT 9-45765
Description
PLR DIAG CUT 7 PRO
PartNo
CRAFT 9-45763
Description
PLR LNG NSE 8 PRO
Long Nose Pliers 8 ”
Tongue & Groove Pliers 9 1/2”
Description
PLR SLPJNT 6-3/4 PRO
Plier Set 6 Pc.
V-notch biased teeth for gripping on round or hex surfaces.
PartNo
CRAFT 9-45761
Includes: • 9-45760 6-3/4" Slip Joint • 9-45764 9" Linesman • 9-45765 7"
Wide Jaw Diag. • 9-45762 6" Diagonal • 9-45763 8" Long Nose • 9-45761 91/2" Tongue & Groove
PartNo
CRAFT 9-50476
Description
SET PLR 6PC PRO
Phone: 402-455-6151
Toll Free: 800-488-9699
389
Description
PLR ARC JNT 9-1/2 PRO
800-488-9699
Craftsman Tools
PartNo
CRAFT 9-45762
Hand Tools
Locking Plier Set 3 Pc.
Craftsman Tools
Pliers and Snips
Professional Pliers
Pliers-RoboGrip®
Includes 9-45715, 9-45710 and 9-45716.
PartNo
CRAFT 9-45713
Description
SET PLR LCK 3PC PRO
Locking Pliers Set 3 Pc.
Includes 8" straight jaw, 10" straight jaw, 10" curved jaw.
Self adjust around object. Spring loaded for one hand operation. Exclusive
cam mechanism adjusts as quickly as you can squeeze the handle. Unique
design allows straight jaw to grasp objects up to 3/4"; curved jaw grasps
objects up to 1-1/4". Laminated construction.
Robo Grip® is a Registered Trademark of Applied Concepts, Inc.
PartNo
CRAFT 9-45008
CRAFT 9-45029
Description
PLR ROBOGRP CRV JAW 7
PLR ROBOGRP CRV JAW 9
Locking Pliers Straight Jaw
PartNo
CRAFT 9-45613
Description
SET PLR LCK 3PC
Includes 10" straight jaw, 6" curved jaw, 8" curved jaw, 7-1/2" long nose.
PartNo
CRAFT 9-45614
Description
SET PLR LCK 4PC
Auto-Lock Pliers Curved Jaw
Treated alloy steel with soft grip handles. Patented release mechanism
eliminates the need for a guarded trigger.
PartNo
CRAFT 9-45604
CRAFT 9-45607
CRAFT 9-45711
CRAFT 9-45715
Description
PLR LCK STRT JAW 8
PLR LCK STRT JAW 10
PLR LCK STRT 7 PRO
PLR LCK STRT 10 PRO
PartNo
CRAFT 9-45306
CRAFT 9-45309
Includes 7" straight (9-45307) and 9" curved (9-45309) pliers.
Description
SET PLR AUTOLCK 2PC
Locking Plier Set 2 Pc.
Treated alloy steel with soft grip handles. Patented release mechanism
eliminates the need for a guarded trigger.
Includes 9-45711 and 9-45714.
PartNo
CRAFT 9-45712
Description
SET PLR LCK 2PC PRO
PartNo
CRAFT 9-45601
CRAFT 9-45717
CRAFT 9-45603
CRAFT 9-45710
CRAFT 9-45606
CRAFT 9-45714
Includes 8" straight jaw, 6" curved jaw.
PartNo
CRAFT 9-45612
Description
SET PLR LCK 2PC
Auto-Lock Plier Set 3 Pc.
Description
SET PLR AUTOLCK 3PC
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
PLR LCK CRV JAW 6
PLR LCK CRV 5 PRO
PLR LCK CRV JAW 8
PLR LCK CRV 7 PRO
PLR LCK CRV JAW 10
PLR LCK CRV 10 PRO
Locking Pliers Long Nose
Includes 6" curved (9-45306), 7" straight (9-45307) and 9" curved (9-45309)
pliers.
PartNo
CRAFT 9-45305
Description
PLR AUTOLCK CURV JAW 6
PLR AUTOLCK CURV JAW 9
Locking Pliers Curved Jaw
Auto-Lock Plier Set 2 Pc.
PartNo
CRAFT 9-45308
Automatically self-sizes with a squeeze. Eliminates screw adjustment.
Delivers up to 500 lbs. of grip force. Laminated construction, padded handles.
390
Internal screw adjustment. Spring-loaded release and extended lever. Upper
handle is wider than traditional locking pliers. Handle is poly-coated. Crossfunctional teeth, extended tip surface. Heat-treated alloy steel, nickel-plated
for corrosion resistance. Jaws are laminated.
PartNo
CRAFT 9-45602
CRAFT 9-45716
CRAFT 9-45605
Description
PLR LCK LNG NSE 7-1/2
PLR LCK LNG NSE 6 PRO
PLR LCK LNG NSE 10
Hand Tools
Mini-Pliers Duck Bill
Pliers and Snips
Auto-Lock Pliers Straight Jaw
PartNo
CRAFT 9-45307
Description
PLR AUTOLCK STRT JAW 7
Mini-Plier Set 3 Pc.
4-1/2". Solid joint, plastic handle grips.
PartNo
CRAFT 9-45668
Description
PLR DKBL 4-1/2 MINI
Mini-Pliers End Nipper
Solid joint “mini-pliers” for close delicate work. Double-leaf springs for ease
of operation. Hard-honed cutting edge gives a clean cut. Plastic handle grips.
9-45664-4-1/2" Long Nose w/cutter, 9-45661-5" Needle Nose, 9-45660-4"
Diagonal.
PartNo
CRAFT 9-45673
Description
SET PLR 3PC MINI
Mini-Pliers Bent Needle Nose
PartNo
CRAFT 9-45667
Description
PLR END NIP 4-1/2 MINI
Mini-Pliers Long Nose with Cutter
PartNo
CRAFT 9-45665
Description
PLR NDL NSE BNT 4-1/2 MINI
Mini-Pliers Diagonal
PartNo
CRAFT 9-45664
Hand Tools That
Yield the Results
You Demand!
PartNo
CRAFT 9-45660
Description
PLR DIAG CUT 4 MINI
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
PLR LNG NSE W/CT 4-1/2 MINI
391
Craftsman Tools
7” Long. Locks up to 1”. Automatically self-sizes with a squeeze. Eliminates
screw adjustment. Delivers up to 500 lbs. of grip force. Laminated
construction, padded handles.
Hand Tools
Snips-16-1/2" Heavy Duty Tin Snips
Pliers and Snips
Mini-Pliers Needle Nose
Forged molybdenum steel blades. 2-1/2" maximum cut.
Craftsman Tools
PartNo
CRAFT 9-42784
Description
SNIPS TIN 16-1/2 HVY DTY
Snips-2 Pc. Handi-Cut® Set
PartNo
CRAFT 9-45661
Description
PLR NDL NSE 5 MINI
Mini-Pliers Round Nose
Includes of 9-37300 and 9-37301.
PartNo
CRAFT 9-37304
Description
SET CUT HANDI-CUT UTL 2PC
Snips-Accu-Cut™ 3-in-1 Tool
PartNo
CRAFT 9-45666
Description
PLR RND NSE 4-1/2 MINI
Mini-Pliers Wide Jaw Diagonal
A wire cutter, utility cutter and utility knife all in one. Use the razor sharp
stainless steel blade for straight cuts on rubber hose, linoleum, plastics,
drywall and more. Titanium plating on wire cutting blade easily cuts copper
and light gauge steel wires. Slide bottom anvil back to expose a utility knife
blade. Includes extra blade that stores in handle. Replaceable anvils and
blades.
PartNo
CRAFT 9-37310
Description
CUT ACCU-CUT 3IN1 TOOL
Snips-Circular Pattern Tinner Snips
PartNo
CRAFT 9-45663
Description
PLR WDE JW DIAG CUT 4-1/2 MINI
Snips-12" Replaceable Blade Snip
Cut screening, sheet metal, tin or wire. Makes straight, irregular and circular
cuts. Forged steel blades.
Magnesium cast handles for strength and light weight, 3-1/2" length of cut.
Cuts up to 22 ga. cold-roll sheet steel.
PartNo
CRAFT 9-42798
Description
SNIPS REPL BLD 12
Phone: 402-455-6151
Toll Free: 800-488-9699
392
PartNo
CRAFT 9-45463
CRAFT 9-45461
CRAFT 9-45462
Description
SNIPS TIN CIRC 7
SNIPS TIN CIRC 10
SNIPS TIN CIRC 12
Hand Tools
Retaining Ring Pliers Kit 12 Pc. Qtr-Turn®
Pliers and Snips
Snips-Handi-Cut® Utility Cutters
PartNo
CRAFT 9-37301
CRAFT 9-37300
Description
CUT HANDI-CUT UTL 3-7/8
CUT HANDI-CUT UTL 2-1/2
Patented toll requires only and easy 1/4 turn to convert tools for internal or
external rings. Set includes: .038 inch straight tip, .038 inch 45° tip angle,
.038 inch 90° tip angle, .047 inch straight tip, .047 inch 45° tip angle, .047
inch 90° tip angle, .070 inch straight tip, .070 inch 45° tip angle, .070 inch
90°, .090 inch straight tip, .090 inch 45° tip angle, .090 inch 90° tip.
Snips-Powersnip® Multi-Purpose Cutters
PartNo
CRAFT 9-50464
3" long sharp blades, one straight, one serrated. Spring loaded, 5:1 power
ratio. Cushion grips. Metal latch to hold closed when not in use. Cuts plastic,
thin gauge metal, vinyl, paper and more.
PartNo
CRAFT 9-45466
Description
SET PLR RNG QTRTRN 12PC
Retaining Ring Pliers Set 2 Pc. Qtr-Turn®
Convertible
Description
CUT POWERSNIP MULT-PURP
Snips-Replacement Blades
Set of 2 blades for 9-42798. High carbon steel. Includes screws, hex nuts.
PartNo
CRAFT 9-42799
Description
BLD SNIPS REPL 2PC
Snips-Replacement Parts for Handi-Cut®
Cutters
Replacement Anvil, 9-37232 For 9-37300, 9-37234 For 9-37301, Set of 3
Replacement Blades, 9-37235 For 9-37300, 9-37236 For 9-37304
PartNo
CRAFT 9-37232
CRAFT 9-37234
CRAFT 9-37235
CRAFT 9-37235
CRAFT 9-37236
Description
CUT HANDI-CUT REPL ANVIL 2-1/2
CUT HANDI-CUT REPL ANVIL 3-7/8
CUT REPL BLD 2-1/2 3PC
CUT REPL BLD 2-1/2 3PC
CUT HANDI-CUT RPL BLD 3-7/8
Includes 9-47383 & 9-47384 pliers. Kit services .125”-2” external and
internal rings. Pliers are converted from external/internal with simple 1/4” of
pivot. Pivot will not loosen while tool is in use. Vinyl-air pocket comfort
grips.
Snips-Straight Pattern Tinner Snip
12" Length.
PartNo
CRAFT 9-45432
PartNo
CRAFT 9-47385
Description
SNIPS TIN STRT 12
Description
SET PLR RET RNG QTRTRN UNV
Snips-Vinyl Siding 12" Straight Pattern Snip
3" cut length. Plastic coated handles for user comfort. WARNING: Do not use
to cut any type of metal. Special cutting edge designed to cut vinyls, plastics,
cloth, and other soft materials only. Warranty void if product used
improperly.
PartNo
CRAFT 9-42788
Description
SNIPS VINYL STRT 12
Phone: 402-455-6151
Toll Free: 800-488-9699
393
800-488-9699 or visit
www.johnday.com
Craftsman Tools
Cuts leather, rubber hose, plastic and more. Replaceable anvils and steel
blades.
Hand Tools
Retaining Ring Pliers Set 6 Pc. Qtr-Turn®
Craftsman Tools
Pliers and Snips
Retaining Ring Pliers Kit 2 Pc.
Requires just 1/4 turn to convert pliers easily for internal or external use. Set
includes: .038 inch straight tip, .038 inch 90° tp angle, .047 inch straight tip,
.047 inch 90° tip angle, .070 inch straight tip, .070 inch 90° tip.Precisionground hardened tips. Vinyl covered air pocket grips.
Patented universal retaining ring pliers are easy to convert. To convert, just
squeeze the handles and shift the two levers up or down. Each tool supplied
with six color-coded tips, both straight and 90°. 9-47396 - Small retaining
ring pliers services rings up to 1”. 9-47397 Medium retaining ring pliers
services rings up to 2”. 9-50460 kit with both 9-47396 & 9-47397 in pouch.
PartNo
CRAFT 9-50460
PartNo
CRAFT 9-47389
Description
SET PLR RET RNG QTRTRN 6PC
Retaining Ring Plier Kit 6 Pc.
Description
SET PLR RNG UNV 2PC PRO
Retaining Ring Pliers Set with 16 Tips 2 Pc.
Universal
Patented Cam-Lock retaining ring enable the user to quickly convert from
internal to external ring use, without taking the tools apart! Set of (6) includes
.038, .047, & .070 diameter tips, in 18° & 70° angles.
PartNo
CRAFT 9-50465
Description
SET PLR RNG CAMLCK 6PC PRO
Combination Retaining Ring Pliers
Service 3/8”-2” internal and 1/4”-2” external rings. Includes (4) .038” 90°, (4)
.047” straight, (4) .047” 45°, and (4) .070” straight tips. Black oxide finish,
durable steel construction. Vinyl grips. Spring loaded action to speed work.
PartNo
CRAFT 9-47387
Description
SET PLR RET RNG UNV 18PC
PartNo
CRAFT 9-45488
Visit Us At
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
For internal rings 3/8" to 1-3/4" and external rings 1/4" to 1-7/16". 5 pr. of
points: 0.039" diam. 15° and 45°, 0.047" diam. 15° and 45°, 0.074" diam. 15°.
394
Description
SET PLR COMB RET RNG
Hand Tools
Pliers and Snips
Internal and External Retaining Ring Plier Kit
Retaining Ring Plier-Small
PartNo
CRAFT 9-47396
Description
PLR RET RNG UNV SM PRO
Screwdrivers
Screwdriver Set 10 Pc.
Includes: Plier with Adjustable Stop; Plier; and Plier with Ratchet Lock in
heavy duty molded red plastic case with tip kits, hex wrench, and instructions.
PartNo
CRAFT 9-30359
Description
SET PLR RET RNG 3PC PRO
Lock Ring Pliers
7/8" jaw opening. Knurled tips to grip snap rings at 90° angle.
PartNo
CRAFT 9-47386
Description
PLR LCK RNG 7/8 JAW
Retaining Ring Plier-Medium
5 Slotted Screwdrivers • 9-41582-3/16" x 9" • 9-41587-5/16" x 8" • 9-415831/4" x 4" • 9-41588-3/8" x 12" • 9-41585-1/4" x 12"
5 Phillips Screwdrivers • 9-41294-#1 x 3 • 9-41297-#3 x 6" • 9-41295-#2 x 4"
• 9-41298-#4 x 8" • 9-41296-#2 x 8"
PartNo
CRAFT 9-41144
External sizes 1/4" thru 2". Internal sizes 3/8" thru 2".
PartNo
CRAFT 9-47397
Description
SET SCRDR SLT /PHLP 10PC
Description
PLR RET RNG UNV MED PRO
Retaining Ring Pliers-Qtr-Turn®
Pliers are converted from external/internal rings with simple 1/4” of pivot.
Pivot will not loosen while tool is in use. Tough steel construction with black
oxide finish. Vinyl-air pocket comfort grips.
9-47384 for 0.438” - 2” internal and external rings with 0.038” tip diameter.
Large with .069 tips.
9-47383 for 0.125” - 2” internal and external rings with 0.070” tip diameter.
Small with .038 tips.
PartNo
CRAFT 9-47384
CRAFT 9-47383
Description
PLR RET RNG TIP .070
PLR RET RNG TIP .038
Phone: 402-455-6151
Toll Free: 800-488-9699
8 Slotted Screwdrivers • 9-41589-1/8" x 4" • 9-41577-3/16" x 6", 3/32" x 11/2" • 9-4151-1/4" x 1-1/2" • 9-41854-3/16" x 1-1/2" • 9-41583-1/4" x 4" • 941581-3/16" x 4" • 9-41584-1/4" x 6"
8 Phillips Screwdrivers • #0 x 1-1/2" • 9-4118-#2 x 1-1/2" • 9-41293-#0 x 21/2" •9-41295-#2 x 4" • 9-41855-#1 x 1-1/2" •9-41583-#2 x 6" •9-41294-#1 x
3" •9-41297-#3 x 6"
PartNo
CRAFT 9-47037
395
Description
SET SCRDR 16PC
Craftsman Tools
With adj. stop. External sizes 1/8" thru 1". Internal sizes 1/4" thru 1".
Hand Tools
Screwdriver Set 4 Pc. Phillips
Craftsman Tools
Screwdrivers
Screwdriver Set 2 Pc. Stubby
Includes: •9-41293-#0 x 2-1/2" • 9-41295-#2 x 4" • 9-41294-#1 x 3" • 941297-#3 x 6"
PartNo
CRAFT 9-41430
Description
SET SCRDR PHLP 4PC
Includes: • 9-41541-3/32" x 1-1/2" • 9-41542-#0 x 1-1/2"
PartNo
CRAFT 9-41543
Description
SET SCRDR STBY 2PC
Includes:• 9-41298-#4x8" • 9-41587-5/16"x8" • 9-41578-1/4"x8" •9-418523/8"x8
PartNo
CRAFT 9-47126
12 Slotted Screwdrivers • 3/32" x 1-1/2" • 9-4151-1/4" x 1-1/2" • 9-415891/8" x 4" • 9-41583-1/4" x 4" • 9-41581-3/16" x 4" • 9-41584-1/4" x 6" • 941577-3/16" x 6" • 9-41578-1/4" x 8" • 9-41248-3/16" x 8" Cabinet • 9-415865/16" x 1-3/4" • 9-41852-3/16" x 9" • 9-41587-5/16" x 8"
9 Phillips Screwdrivers • #0 x 1-1/2" • 9-41295-#2 x 4" • 9-41293-#0 x 2-1/2"
• 9-41296-#2 x 8" • 9-41853-#1 x 1-1/2" • 9-41297-#3 x 6" • 9-41294-#1 x 3"
•9-41298-#4 x 8" •9-4118-#2 x 1-1/2" • 2 Torx® Screwdrivers •9-41473-T-10
• 9-41474-T-15 • 1 Specialty Screwdriver • 4-in-1 Pocket
PartNo
CRAFT 9-41819
CRAFT 9-50480
Screwdriver Set 4 Pc. Slotted
Description
SET SCRDR 24 PC
SET SCRDR 24PC
Screwdriver Set 4 Pc. Heavy Duty
Includes: • 9-41581-3/16" x 4" • 9-41589-1/8" x 4" • 9-41584-1/4" x 4" • 941421-1/8" x 2"
PartNo
CRAFT 9-41431
Includes:• 9-41296-#2 x 8" • 9-41587-5/16" x 8" • 9-41578-1/4" x 8" • 941852-3/8" x 8"
PartNo
CRAFT 9-47104
Description
SET SCRDR 4PC
Description
SET SCRDR 4PC HD
Phone: 402-455-6151
Toll Free: 800-488-9699
396
Description
SET SCRDR SLT 4PC
800-488-9699 or visit
www.johnday.com
Hand Tools
Screwdriver Set 6 Pc. Cushion Grip
Screwdrivers
PartNo
CRAFT 9-47116
Description
SET SCRDR 6PC CUSH GRP
Screwdriver Set 6 Pc. Torx Set
18 Slotted Screwdrivers: • 3/32" x 1-1/2" •9-4151-1/4" x 1-1/2" •9-41421-1/8"
x 2" •9-41583
1/4" x 4" •9-41589-1/8" x 4" •9-41584-1/4" x 6" •941855-3/16" x 1-1/2" •9-41578-1/4" x 8" •9-41581-3/16" x 4" •9-41585-1/4"
x 12" •9-41577-3/16" x 6" •9-41586-5/16" x 1-3/4" •9-41582-3/16" x 9" •941579-5/16" x 6" •9-41247-3/16" x 4" Cabinet •9-41587-5/16" x 8" •9-412483/16" x 8" Cabinet •9-41588-3/8" x 12"
9 Phillips Screwdrivers: • #0 x 1-1/2" •9-41295-#2 x 4" •9-41293-#0 x 2-1/2"
•9-41296-#2 x 8" •9-41294-#1 x 3" •9-41297-#3 x 6" •9-41853-#1 x 1-1/2" •941298-#4 x 8" •9-41315-#2 x 1-1/2"
6 Torx® Screwdrivers: •9-41473-T-10 •9-41476-T-25 •9-41474-T-15 •941479
T-27 •9-41475-T-20 •9-41477-T-30
11 Specialty Screwdrivers: •4-Way Pocket •9-41028-Scratch Awl •1/4" x 1/4"
Offset •#1 x #2 Phillips Offset •#1 Robertson •3/16" x 4" Wire Bending •#2
Robertson •1/4" x 6" Wire Bending •Reed Prince •3/16" x 6" Slt. Speed Drv. Includes: •9-41473-T-10 •9-41476-T-25 •9-41474-T-15 •9-41479-T-27 •9•#1 x 6" Phil. Speed Drv.
41475-T-20 •9-41477-T-30
PartNo
CRAFT 9-41508
Description
SET SCRDR 44PC
PartNo
CRAFT 9-41407
Description
SET SCRDR TORX 6PC
Screwdriver Set 5 Pc. Torx Set
Includes: •9-41473-T-10 •9-41476-T-25 •9-41474-T-15 •9-41479-T-27 •941475-T-20 •Pouch
PartNo
CRAFT 9-41753
Description
SET SCRDR TORX 5PC
4 Slotted Screwdrivers: •9-41421-1/8" x 2" •9-41583-1/4" x 4" •9-41589-1/8"
x 4" •9-41588-3/16" x 6"
4 Phillips Screwdrivers (Round Shaft): •9-41293-#0 x 2-1/2" •9-41295-#2 x
4" •9-41294-#1 x 3" •9-41853-#2 x 6" •Rack
Visit Us At
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-47136
397
Description
SET SCRDR 8PC
Craftsman Tools
3 Slotted Screwdrivers: •9-47113-3/16" x 3" •9-47115-5/16" x 6" •9-471141/4" x 4"
3 Phillips Screwdrivers: •9-47110-#1 x 3" •9-47112-#3 x 6" •9-47111-#2 x 4"
Hand Tools
Torx Screwdrivers
Screwdrivers
Star-shaped head.
Craftsman Tools
PartNo
CRAFT 9-41473
CRAFT 9-41474
CRAFT 9-41475
CRAFT 9-41476
CRAFT 9-41479
CRAFT 9-41477
Description
SCRDR TORX T-10
SCRDR TORX T-15
SCRDR TORX T-20
SCRDR TORX T-25
SCRDR TORX T-27
SCRDR TORX T-30
Micro-Tech Screwdriver Set 10 Pc.
3 Slotted Screwdrivers: •9-41522-3/32" •9-41523-1/8" •9-41525-5/32"
3 Phillips Screwdrivers: •9-41526-#00 •9-41527-#0 •9-41528-#1
4 Hex Screwdrivers: •9-41692-5/64" •9-41694-7/64" •9-41695-1/8" •9-416933/32" •Plastic Pouch
5 Slotted Screwdrivers: •9-41589-1/8" x 4" •9-41584-1/4" x 6" •9-415813/16" x 4" •9-41588-3/8" x 12" •9-41582-3/16" x 9"
4 Phillips Screwdrivers (Round Shaft): •9-41293-#0 x 2-1/2" •9-41295-#2 x
4" •9-41294-#1 x 3" 9-41297-#3 x 6"
PartNo
CRAFT 9-41099
Description
SET SCRDR SLT/PHLP 9PC
PartNo
CRAFT 9-47113
CRAFT 9-47114
CRAFT 9-47115
CRAFT 9-47110
CRAFT 9-47112
Description
SCRDR SLT 3/16X3 CUSH GRP
SCRDR PHLP #1X3 CUSH GRP
SCRDR PHLP #3/6 CUSH GRP
PartNo
CRAFT 9-41293
CRAFT 9-41855
CRAFT 9-41294
CRAFT 9-4118
CRAFT 9-41295
CRAFT 9-41853
CRAFT 9-41296
CRAFT 9-41297
CRAFT 9-41298
Description
SCRDR PHLP #0X2-1/2
SCRDR PHLP #1X1-1/2
SCRDR PHLP #1X3
SCRDR PHLP #2X1-1/2
SCRDR PHLP#2X4
SCRDR PHLP #2X6
SCRDR PHLP #2X8
SCRDR PHLP #3X6
SCRDR PHLP #4X8
Screwdrivers w/ Cushion Grip
PartNo
CRAFT 9-41544
Description
SET SCRDR MCRO-TCH 10PC
Phillips Screwdrivers
5 Slotted Screwdrivers: •9-45721-3/64" •9-45723-5/64" • 9-45725-1/8" •945722-1/16" •9-45724-3/32"
3 Phillips Screwdrivers: •9-45726-#000 •9-45727-#00 •9-45728-#0
4 Torx® Screwdrivers: •9-45729-T-6 •9-45731-T-8 •9-45730-T-7 •9-45732-T9
PartNo
CRAFT 9-45736
Slotted Screwdrivers
+ Cabinet Tip
PartNo
CRAFT 9-41589
CRAFT 9-41854
CRAFT 9-41581
CRAFT 9-41247
CRAFT 9-41577
CRAFT 9-41248
CRAFT 9-41582
CRAFT 9-4151
CRAFT 9-41583
CRAFT 9-41578
CRAFT 9-41584
CRAFT 9-41585
CRAFT 9-41586
CRAFT 9-41579
CRAFT 9-41587
CRAFT 9-41852
CRAFT 9-41588
2 Slotted Screwdrivers: •9-41522-3/32" •9-41523-1/8"
3 Phillips Screwdrivers: •9-41526-#00 •9-41527-#0 •9-41528-#1 •Plastic
Pouch
PartNo
CRAFT 9-41520
Description
SCRDR SLT 1/8X4
SCRDR SLT 3/16X1-1/2
SCRDR SLT 3/16X4
SCRDR CAB TIP 3/16X4
SCRDR SLT 3/16X6
SCRDR CAB TIP 3/16X8
SCRDR SLT 3/16X9
SCRDR SLT 1/4X1-1/2
SCRDR SLT 1/4X4
SCRDR SLT 1/4X8
SCRDR SLT 1/4X6
SCRDR SLT 1/4X12
SCRDR SLT 5/16X1-3/4
SCRDR SLT 5/16X6
SCRDR SLT 5/16X18
SCRDR SLT 3/16X9
SCRDR SLT 3/8X12
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET SCRDR MCRO-TCH 12PC 1-1/2
Description
Micro-Tech Torx® Screwdriver Set 5 Pc.
5 Torx® Screwdrivers: •9-41551-T-6 •9-41553-T-8 •9-41555-T-10 •9-41552T-7 •9-41554-T-9 •Plastic Pouch
PartNo
CRAFT 9-45737
Description
SET SCRDR TORX MCRO-TCH 5PC
800-488-9699
398
Impact Grade Bolt-Out® Damaged Bolt/Nut
Remover Set 10 Pc.
5 Slotted Screwdrivers: •9-41521-5/64" •9-41523-1/8" •9-41525-5/32" •41522-3/32" •9-41524-9/64"
3 Phillips Screwdrivers: •9-41526-#00 •9-41527-#0 •9-41528-#1 •Plastic
Pouch
Specialty socket set designed to easily remove rounded, or corroded nuts,
bolts, wheel lugs, pipes, pipe nipples or studs. Fits 15mm, 16mm, or 5/8",
17mm, 19mm or 3/4", 10mm, 11mm or 7/16", 12mm, 13mm, 14mm, punch.
With blow molded storage case.
Micro-Tech Screwdrivers
Low Profile Bolt-Out® Damaged Bolt/Nut
Remover Set 10 Pc.
Screwdrivers
PartNo
CRAFT 9-41489
Description
PartNo
CRAFT 9-52165
Description
SET BOLT OUT IMP 10PC
4" Blades. + 2-1/2" Blade
PartNo
CRAFT 9-41521
CRAFT 9-45721
CRAFT 9-41522
CRAFT 9-45722
CRAFT 9-41523
CRAFT 9-45723
CRAFT 9-41524
CRAFT 9-45724
CRAFT 9-41525
CRAFT 9-45725
CRAFT 9-41526
CRAFT 9-45726
CRAFT 9-41527
CRAFT 9-45727
CRAFT 9-41528
CRAFT 9-45728
CRAFT 9-41551
CRAFT 9-45729
CRAFT 9-41552
CRAFT 9-45730
CRAFT 9-41553
CRAFT 9-45731
CRAFT 9-41554
CRAFT 9-45732
CRAFT 9-41691
CRAFT 9-41692
CRAFT 9-41693
CRAFT 9-41694
CRAFT 9-41695
CRAFT 9-41696
CRAFT 9-41864
CRAFT 9-41865
CRAFT 9-41866
CRAFT 9-41867
CRAFT 9-41868
CRAFT 9-41869
Description
SCRDR SLT MCRO-TCH 5/64X4 PRO
SCRDR SLT MCRO-TCH 3/64X 1-1/2
SCRDR PHLP MCRO-TCH #00X4 PRO
SCRDR PHLP MCRO-TCH #000X 1-1/2
SCRDR TORX MCRO-TCH T-6X4 PRO
SCRDR TORX MCRO-TCH T-6X 1-1/2
SCRDR HEX MCRO-TCH 1/16X4 PRO
NUTDR MCRO-TCH 3/32X4 PRO
Removes stripped, rusted, or painted nuts/bolts that cannot be
gripped/removed by ordinary tools. #3 remover fits hex size 3/8", #4 remover
fits hex size 10mm, #5 remover fits hex sizes 7/16" and 11mm, #6 fits hex
size 12mm, #7 fits 1/2", #8 fits hex size 13mm, #9 fits hex sizes 9/16" and
14mm, and #10 remover fits hex sizes 5/8" and 16mm, #11 fits 17mm, #12
fits hex size 11/16", and #13 remover fits hex sizes 3/4" and 19mm. With
blow molded storage case.
PartNo
CRAFT 9-52166
Screwdriver Set 11-in-1 Power Grip™
Non-magnetic. 5 double bits: Torx® T-15, T-20, T-25, T-30, Slotted #3-4, #56, #12-14, Phillips #1, #2, #3.
Magnetic Bit Handle 1/4” Drive
PartNo
CRAFT 9-43373
PartNo
CRAFT 9-41478
Description
SCRDR HDL MAG BIT
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET BOLT OUT LOW PROF 10 PC
399
Description
SCRDR 11IN1 5BIT PWR GRP
Craftsman Tools
Hand Tools
Hand Tools
Ratcheting Screwdriver Bit Wrench Set 25 Pc.
Screwdrivers
Craftsman Tools
Bolt-Out® Damaged Bolt/Nut Remover Set 3
Pc.
Includes 1 offset ratcheting box wrench, 1 flat ratcheting box wrench, 1
magnetic extension and 22 bits: sizes 3/16" and 9/32" slotted; #1 and #2
phillips; T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 and T-50 Torx;
3/16", 5/32", 5/64", 3/32", 7/64", 1/8", 9/64" and 7/32" hex. In plastic case.
PartNo
CRAFT 9-42151
Description
SET WR RAT SCRDR BIT 25PC
Ratcheting Magnetic Screwdriver/Nutdriver
Set 29 Pc.
Removes stripped, rusted, or painted nuts/bolts that cannot be
gripped/removed by ordinary tools. #1 remover fits hex size 1/4", #2 remover
fits hex sizes 5/16" and 8mm, #3 remover fits hex size 3/8", #4 remover fits
hex size 10mm, #5 remover fits hex sizes 7/16" and 11mm, #6 fits hex size
12mm, #7 fits 1/2", #8 fits hex size 13mm, #9 fits hex sizes 9/16" and 14mm,
and #10 remover fits hex sizes 5/8" and 16mm, #11 fits 17mm, #12 fits hex
size 11/16", and #13 remover fits hex sizes 3/4" and 19mm. With blow
molded storage case.
Includes 6 slotted bits, 6 phillips bits, 4 Torx® bits, 7 nutdrivers, 2 Robertson
bits, 2 hex socket bits, 1 magnetic screwdriver, 1 bit holder, molded carrying
case. Fully reversible ratchet action.
PartNo
Description
CRAFT 9-52162
SET BOLT OUT 13PC 1-13
PartNo
CRAFT 9-41862
Screwdriver/Nutdriver Set 13 Pc.
Description
SET SCRDR RAT MAG 29PC
Tamperproof Screwdriver Set 32 Pc.
Shaft has a powerful neodium boron iron magnet for holding bits and screws.
Extra bits (not included) can be stored below the swivel cap inside the handle.
Includes 0 Torx® bits, 6 slotted bits, 6 Hex metric bits, 4 spanner bits, 4
Triwing® bits, 3 Torqset® bits. 1/4” sq. dr. to 1/4” hex adapter.
PartNo
CRAFT 9-47486
Description
SET SCRDR TAMP PRF 32PC 47486
Precision Screwdriver 4-in-1
Includes 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8" nutdriver blades; 3/16",
2 double ended blades (1/8" and 5/64" slotted, #000 and #0 Phillips).
1/4" slotted S.D. blades; #1, #2 phillips screwdriver blades; extension and
Swiveling head. 5-1/8" OAL.
handle.
PartNo
CRAFT 9-45324
Description
SET SCRDR-NTDR 13PC
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-45734
400
Description
SET SCRDR 4IN1 PRCSN 4PC
Hand Tools
Reversible Offset Ratchet Set 5 Pc.
Screwdrivers
Reversible Screwdriver 4-in-1
Contains ratchet, 1/4", 3/8" slotted bits, #1, #2 phillips bits.
Description
SET SCRDR RAT OFF REV 5PC
Power Grip™ Screwdriver Set 5-in-1
Magnetic. 5 single bits: Torx® T-25, T-30, Slotted #4-5, #8-10, Phillips #1,
#2.
PartNo
CRAFT 9-41529
Interchangeable double-ended bits: 3/16" and 1/4" slotted; #1 and
#2 Phillips. Bits store in shaft.
PartNo
CRAFT 9-41161
Description
SCRDR 4IN1 REV 4BIT
Bolt-Out® Damaged Bolt/Nut Remover Add-on
Set 5 Pc.
Description
SCRDR 5IN1 5BIT PWR GRP
Grip Driver II™ Ratcheting Magnetic
Same driver as set 9-47470 but with these bits: three slotted (3/16", 1/4",
9/32") and three Phillips (#1, #2, #3). No case.
PartNo
CRAFT 9-47471
Description
SET SCRDR RAT MAG PVT HDL 7PC
Cushion Grip Nutdriver Set 7 Pc. Metric
9-42201 5mm •9-42203
7mm •9-42205
11mm •9-42202
6mm •9-42204
8mm
9-42206 10mm •Plastic Carry Rack
PartNo
CRAFT 9-42200
9mm •9-42207
Description
SET NUTDR 7PC CUSH GRP MET
Nutdriver Set 7 Pc. Metric
5 piece set fits many popular hex sizes (metric/standard). Tapered spiral flute
design grabs and removes rusted, painted over nuts and bolts (fits may vary
due to corrosion/damage/paint). #2 remover fits hex sizes 5/16" and 8mm, #4
remover fits hex size 10mm, #8 fits hex size 13mm, #12 fits hex size 11/16",
and #13 remover fits hex sizes 3/4" and 19mm. With blow molded storage
case.
PartNo
CRAFT 9-52160
Alloy steel sockets and shafts: •9-41981 5mm •9-41983
7mm •9-41985
9mm •9-41987
11mm
9-41982 6mm •9-41984
8mm •9-41986
10mm •Plastic Carry
Rack
PartNo
CRAFT 9-4197
Description
SET NUTDR 7PC MET
Cushion Grip Nutdriver Set 7 Pc. Standard
Description
SET BOLT OUT 5PC 3,5,7,9
Bolt-Out® Damaged Bolt/Nut Remover Set 5
Pc.
5 piece set fits many popular hex sizes (metric/standard). Tapered spiral flute
design grabs and removes rusted, partially rounded off nuts and bolts. #3
remover fits hex size 3/8", #5 remover fits hex sizes 7/16" and 11mm, #7 fits
hex size 12mm, #9 fits hex sizes 9/16" and 14mm, and #10 remover fits hex
sizes 5/8" and 16mm. With blow molded storage case.
PartNo
CRAFT 9-52161
Description
SET BOLT OUT 5PC 2,4,8,12
Offset Reversible Ratcheting Screwdriver Bit
Wrench Set 5 Pc.
Includes 1/4", 9/32" slotted and #1, #2 phillips bits. 25° offset head. Reversing
lever. Raised knurl makes fingertip turning easy. Magnetic bit holder. Vinyl
grip. Fits any 1/4" hex bit.
PartNo
CRAFT 9-41715
Description
SET WR SCRDR RAT REV OFF 5P
Phone: 402-455-6151
Toll Free: 800-488-9699
401
•9-42191-3/16" •9-42193-5/16" •9-42195-3/8" •9-42197-1/2" •9-42192-1/4"
•9-42194-11/32" •9-42196-7/16" •Plastic Carry Rack
PartNo
CRAFT 9-42190
Description
SET NUTDR 7PC CUSH GRP
Visit Us At
www.johnday.com
Craftsman Tools
PartNo
CRAFT 9-41469
Hand Tools
Individual Nutdrivers - Standard & Metric
Nutdriver Set 7 Pc. Standard
Each Nutdriver size is color-coded.
Screwdrivers
Craftsman Tools
PartNo
CRAFT 9-41977
CRAFT 9-41971
CRAFT 9-41972
CRAFT 9-41973
CRAFT 9-41974
CRAFT 9-41975
CRAFT 9-41976
CRAFT 9-41981
CRAFT 9-41982
CRAFT 9-41983
CRAFT 9-41984
CRAFT 9-41985
CRAFT 9-41986
CRAFT 9-41987
Alloy steel sockets and shafts: •9-41977-3/16" •9-41972-5/16" •9-41974-3/8"
•9-41976-1/2" •9-41971-1/4" •9-41973-11/32" •9-41975-7/16" •Plastic Carry
Rack
PartNo
CRAFT 9-4196
Description
SET NUTDR 7PC
PartNo
CRAFT 9-4319
Description
SCRDR KEY COTTER PULL
Description
NUTDR 3/16
NUTDR 1/4
NUTDR 5/16
NUTDR 11/32
NUTDR 3/8
NUTDR 7/16
NUTDR 1/2
NUTDR 5MM
NUTDR 6MM
NUTDR 7MM
NUTDR 8MM
NUTDR 9MM
NUTDR 10MM
NUTDR 11MM
Multi-Blade Precision Screwdriver Set
Cotter Key Puller
Swivelling head, locking screw chuck. Blades store in handle. Includes 5
blades: 1/16", 5/64" and 3/32 slotted; #00 Phillips; T6 Torx®.
Hand Impact Driver Set
Non-Ratcheting Magnetic-Tip Screwdriver Set
PartNo
CRAFT 9-45735
Description
SET SCRDR PRCSN MULT BLD 6P
Chrome-vanadium alloy steel tips, 4” shank. Hollow plastic handle stores
3/16”, 9/32” slotted, #1 and #2 phillips bits.
PartNo
CRAFT 9-41467
Description
SET SCRDR MAG 5PC
Offset Reversible Ratchet Screwdrivers
Includes 1/2" sq. drive tool, adapter; Nos. 2, 3, 4 Phillips; 3/8" slotted bit.
Each impact turns bit up to 20°.
PartNo
CRAFT 9-47641
Description
SET IMP DR HND 1/2DR 6PC
Has alloy steel blades.
PartNo
CRAFT 9-4117
CRAFT 9-4119
CRAFT 9-4116
Description
SCRDR RAT OFF SLT 1/4&3/8
SCRDR RAT OFF PHLP #1&#2
SCRDR RAT OFF SLT 1/4PHLP#2
Individual Cushion Grip Nutdrivers - Standard
& Metric
Offset Screwdriver
For use in close quarters. Nickel plated, high carbon heat-treated steel. 4-1/4"
long. Slotted 1/4" and Phillips #2.
Each nutdriver is color coded.
PartNo
CRAFT 9-42191
CRAFT 9-42192
CRAFT 9-42193
CRAFT 9-42194
CRAFT 9-42195
CRAFT 9-42196
CRAFT 9-42197
CRAFT 9-42201
CRAFT 9-42202
CRAFT 9-42203
CRAFT 9-42204
CRAFT 9-42205
CRAFT 9-42206
CRAFT 9-42207
Description
NUTDR 3/16 CUSH GRP
NUTDR 1/4 CUSH GRP
NUTDR 5/16 CUSH GRP
NUTDR 11/32 CUSH GRP
NUTDR 3/8 CUSH GRP
NUTDR 7/16 CUSH GRP
NUTDR 1/2 CUSH GRP
NUTDR 5MM CUSH GRP
NUTDR 6MM CUSH GRP
NUTDR 7MM CUSH GRP
NUTDR 8MM CUSH GRP
NUTDR 9MM CUSH GRP
NUTDR 10MM CUSH GRP
NUTDR 11MM CUSH GRP
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-41315
Description
SCRDR OFF SLT 1/4 PHLP #2X4-1/4
Pocket Clip Screwdriver
Has a 1/8" x 2" slotted blade. 4" long.
PartNo
CRAFT 9-41421
CRAFT 9-41421
402
Description
SCRDR SLT PKT CLIP 1/8X2
SCRDR SLT PKT CLIP 1/8X2
Hand Tools
Screw Starter for Phillips and Torx® Screws
Starts most standard screws with 15 in.-lb. torque. Releases automatically.
Alloy steel blade, bit. 5-5/8" long.
Screwdrivers
PartNo
CRAFT 9-41025
Precision Screwdriver Set
Description
SCRDR START PHLP/TORX 5-5/8
Screw Starter for Slotted Screws
PartNo
CRAFT 9-41024
Description
SCRDR START SLT 5-5/8
Screw-Holding Drivers
Craftsman® Precision screwdriver set has 5 blades: .040", .055", .070", .100" Thumb control for one-hand use.
slotted and one Phillips. Storage case.
PartNo
CRAFT 9-4107
PartNo
CRAFT 9-41123
CRAFT 9-41124
CRAFT 9-41362
CRAFT 9-41363
Description
SET SCRDR PRCSN 6BLD
Ratcheting Magnetic-Tip Screwdriver Set
Firmly holds bit and screw. Chrome-vanadium alloy steel tips, 4" shank.
Hollow plastic handle stores 3/16", 9/32" slotted and Nos. 1 and 2 Phillips
bits.
PartNo
CRAFT 9-41466
Description
SCRDR SCR HLD 1/8X4
SCRDR SCR HLD 3/16X5
SCRDR SCR HLD 1X4
SCRDR SCR HLD 2X5
Professional Screwdrivers
Description
SET SCRDR RAT MAG 5PC
Readybit® Ratcheting Screwdriver Set
6 Slotted Screwdrivers: •9-47204-3/16" x 4" •9-47196-1/4" x 8" •9-471931/4" x 2-1/4" •9-47197
5/16" x 6" •9-47194-1/4" x 4" •9-47199-3/8" x
8"
4 Phillips Screwdrivers: •9-47184-#1 x 4" •9-47186-#2 x 4" •9-47185-#2 x 21/4" •9-47187-#3 x 6"
Three-position silent ratcheting mechanism to rapidly drive or release
fasteners. Features forward/reverse and lock positions for fast screwdriving
and nutdriving. Revolving bit storage rack in handle holds fifteen hex-shank
insert bits. Includes five Phillips (P1, three P2, P3), five slotted (4-6, two 6-8,
two 8-10), four Robertson (two R1, two R2) and Torx® T20. Bits secured by
magnetic holder. Soft grip handle with rotating cap.
PartNo
CRAFT 9-41796
PartNo
CRAFT 9-47203
Description
Description
SET SCRDR RAT READYBIT 16PC
Replacement Bits (not shown)
For (9-47641)
Phillips Bits & Straight-Slotted Bits
PartNo
CRAFT 9-47631
CRAFT 9-47632
CRAFT 9-47635
CRAFT 9-47636
CRAFT 9-47637
Description
BITS 1/2DR IMP DR HND REPL PHL
BITS 1/2DR IMP DR HND REPL SLT
PartNo
CRAFT 9-41028
Description
AWL SCRATCH
Scratch Awl
11 Slotted Screwdrivers: •9-47189-1/8" x 3" •9-47195-1/4" x 6" •9-472043/16" x 4" •9-47196-1/4" x 8" •9-47191-3/16" x 6" •9-47197-5/16" x 6" •947192-3/16" x 6" •9-47198-5/16" x 8" •9-47193-1/4" x 2-1/4" •9-47199-3/8"
x 8" •9-47194-1/4" x 4"
6 Phillips Screwdrivers: •9-47183-#0 x 3" •9-47186-#2 x 4" •9-47184-#1 x 4"
•9-47187-#3 x 6" •9-47185-#2 x 2-1/4" •9-47188-#4 x 8"
3 Torx® Screwdrivers: •9-47180-T-10 •9-47182-T-20 •9-47181-T-15 •+
Cabinet Tip
PartNo
CRAFT 9-50479
Phone: 402-455-6151
Toll Free: 800-488-9699
403
Description
Craftsman Tools
Starts most standard screws with 15 in.-lb. torque. Releases automatically.
Alloy steel blade, bit. 5-5/8" long.
Hand Tools
Screwdrivers
Professional Screwdrivers
PartNo
CRAFT 9-47186
CRAFT 9-47187
CRAFT 9-47188
Description
SCRDR PHLP #2X4 PRO
SCRDR PHLP #3X6 PRO
SCRDR PHLP #4X8 PRO
PartNo
CRAFT 9-47180
CRAFT 9-47181
CRAFT 9-47182
Description
SCRDR TORX-10X6 PRO
SCRDR TORX T-15X6 PRO
SCRDR TORX T-20X6 PRO
Craftsman Tools
Torx Screwdrivers
Punches/Chisels
Punch, Chisel, and Line Up Tool Set 12 Pc.
3 Slotted Screwdrivers: •9-47204-3/16" x 4" •9-47197-5/16" x 6" •9-471941/4" x 4"
2 Phillips Screwdrivers: •9-47184-#1 x 4" •9-47186-#2 x 4"
PartNo
CRAFT 9-47201
Description
•1 Center Punch •9-42861-3/8" •1 Prick Punch •9-42841-3/8" •4 Pin Punches
•9-42881-1/16" •9-42883-1/8" •9-42885-3/16" •9-42882-3/32" •2 Line-Up
Tools •9-42901-5/32"•9-42902-3/16" •4 Cold Chisels •9-42971-1/4" •9-429731/2" •9-42974-5/8" •9-42975-3/4"
PartNo
CRAFT 9-43036
Description
SET PNCH-CHSL 12PC
Cold Chisels 12" Long
5 Slotted Screwdriver: •9-47195-1/4" x 6"
3 Phillips Screwdrivers: •9-47184-#1 x 4" •9-47186-#2 x 4" •9-47185-#2 x 2Black oxide finish.
1/4"
PartNo
CRAFT 9-47202
Description
PartNo
CRAFT 9-42851
CRAFT 9-42852
CRAFT 9-42853
CRAFT 9-42854
Slotted Screwdrivers
+ Cabinet Tip
PartNo
CRAFT 9-47189
CRAFT 9-47204
CRAFT 9-47191
CRAFT 9-47192
CRAFT 9-47193
CRAFT 9-47194
CRAFT 9-47195
CRAFT 9-47196
CRAFT 9-47197
CRAFT 9-47198
CRAFT 9-47199
Punch and Chisel Set 14 Pc.
•1 Center Punch, 9-42861-3/8" •1 Prick Punch, 9-42841-3/8" •6 Pin Punches,
•9-42881-1/16", 9-42883-1/8", 9-42885-3/16", 9-42882-3/32", 9-42884-5/32",
9-42886-1/4" •2 Line-Up Tools, 9-42901-5/32", 9-42902
3/16". •4 Cold
Chisels, 9-42971-1/4", 9-42973-1/2", 9-42974-5/8", 9-42975-3/4"
Description
SCRDR SLT 1/8X3 PRO
SCRDR SLT 3/16X4 PRO
SCRDR SLT 3/16X6 CAB PRO
SCRDR SLT 1/4X2-1/4 PRO
SCRDR SLT 1/4X4 PRO
SCRDR SLT 1/4X6 PRO
SCRDR SLT 1/4X8 PRO
SCRDR SLT 3/8X8 PRO
Description
SCRDR PHLP #0X3 PRO
SCRDR PHLP #1X4 PRO
SCRDR PHLP #2X2-1/4 PRO
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-2924
Description
SET PNCH CHSL 14PC
PartNo
CRAFT 9-42861
CRAFT 9-42862
Description
PNCH CNTR 3/8X4-1/2
PNCH CNTR 1/2X6
PartNo
CRAFT 9-42971
CRAFT 9-42972
CRAFT 9-42973
CRAFT 9-42974
CRAFT 9-42975
CRAFT 9-42976
Description
CHSL CLD 1/4X4
CHSL CLD 3/8X5
CHSL CLD 1/2X6
CHSL CLD 5/8X6-1/2
CHSL CLD 3/4X7
CHSL CLD 7/8X7-3/4
Center Punches
Cold Chisels
Phillips Screwdrivers
PartNo
CRAFT 9-47183
CRAFT 9-47184
CRAFT 9-47185
Description
PNCH CHSL CLD 1/2X12
404
Hand Tools
Punch, Chisel, Nail Set and Line Up Tool Set
20 Pc.
Punches/Chisels
Line Up Tools
Description
LINEUP TL 1/8PT 5 1/2"
LINEUP TL 5-32PT 7
LINEUP TL 3/16PT 9
LINEUP TL 1/4PT 12
PartNo
CRAFT 9-42881
CRAFT 9-42882
CRAFT 9-42883
CRAFT 9-42884
CRAFT 9-42885
CRAFT 9-42886
Description
PNCH PIN 1/8PT 4-1/4
PNCH PIN 5/32PT 5
PartNo
CRAFT 9-36850
CRAFT 9-36851
CRAFT 9-36852
CRAFT 9-36853
CRAFT 9-36854
CRAFT 9-36855
Description
CHSL WD 1/4 HDL
CHSL WD 1/2 HDL
CHSL WD 3/4 HDL
CHSL WD 1 HDL
CHSL WD 1-1/4 HDL
CHSL WD 1-1/2 HDL
Pin Punches
Craftsman Tools
PartNo
CRAFT 9-42905
CRAFT 9-42901
CRAFT 9-42902
CRAFT 9-42903
2 Center Punches •9-42861-3/8" •9-42862-1/2"
6 Pin Punches •9-42881-1/16" •9-42883-1/8" •9-42885-3/16" •9-42882-3/32"
9-42886-1/4"
•9-42884-5/32"
1 Prick Punch •9-42841-3/8"
3 Line-Up Tools •9-42901-5/32" •9-42902-3/16" •9-42903-1/4"
6 Cold Chisels •9-42971-1/4" •9-42973-1/2" •9-42975-3/4" •9-42972-3/8" •942974-5/8" •9-42976-7/8"
Hammer not included.
2 Nail Sets – 1/32”, 1/16”
Wood Chisels
PartNo
CRAFT 9-43022
Punch, Chisel, Nail and Alignment Tool Set 6
Pc.
Description
SET PNCH-CHSL-LINEUP 20PC
Wood Chisel Set 3 Pc.
Include: 1/2", 3/4" and 1".
PartNo
CRAFT 9-36857
Description
SET CHSL WD 3PC HDL
Punch and Chisel Set 5 Pc.
2 Pin Punches •9-42883-1/8" •9-42885-3/16"
1 Center Punch •9-42861-3/8"
2 Cold ChiselS •9-42973-1/2" •9-42974-5/8"
PartNo
CRAFT 9-4301
Description
SET PNCH-CHSL 5PC
Punch and Line Up Tool Set 5 Pc.
2 Nail Sets •1/32", 1/16".
1 Center Punch •9-42861-3/8"
1 Prick Punch •9-42841-3/8"
5 Pin Punches •9-42881-1/16" •9-42883-1/8" •9-42885-3/16" •9-42882-3/32"
•9-42884-5/32"
2 Line-Up Tools •9-42901-5/32" •9-42902-3/16"
3 Cold Chisels •9-42971-1/4" •9-42972-3/8" •9-42974-5/8"
2 Long Cold Chisels - 9-42851-1/2" •9-42853-3/4"
4 Pin Punches •9-42881-1/16" •9-42883-1/8" •9-42884-5/32" •9-42882-3/32"
1 Line-Up Tool •9-42901-5/32"
PartNo
CRAFT 9-43113
Description
SET PNCH-CHSL 16PC
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-4285
405
Description
SET PNCH-LINEUP 5PC
Hand Tools
Punch Set 6 Pc. Roll Pin
Punches/Chisels
Craftsman Tools
Wood Chisel Set 5 Pc.
6 Pin Punches •9-42881-1/16"x4-1/4" •9-42883 1/8"x4-11/16" •9-428853/16"x5-3/8" •9-42882 3/32"x4-7/16"
•9-42884-5/32"x5" •9-42886 1/4"x5-3/8" •Vinyl Pouch
PartNo
CRAFT 9-43167
Punch, Line Up and Chisel Set 9 Pc.
Includes 1/4", 1/2", 3/4", 1" and 1-1/4".
PartNo
CRAFT 9-36859
Description
SET PNCH ROLL PIN 6PC 43167
Description
SET CHSL WD 5PC HDL
Punch Set 6 Pc. Extra Long
1 Center Punch •9-42861-3/8", 1 Prick Punch •9-42841-3/8", 3 Pin Punches
•9-42881-1/16" •9-42882-3/32", •9-42883-1/8", 2 Line-Up Tools •9-429015/32" •9-42902-3/16", 2 Cold Chisels •9-42973-1/2"•9-42975-3/4"
6 Extra Long Pin Punches •5/32"x7-1/2" •7/32"x7-1/2" •5/16"x7-1/2"
•3/16"x7-1/2" •1/4"x7-1/2" •3/8"x7-1/2" •Vinyl Pouch
PartNo
CRAFT 9-43169
PartNo
CRAFT 9-43038
Description
SET PNCH ROLL XLNG 6PC 43169
Punch, Chisel and Line-Up Set 6 Pc.
Heavy-Duty
Description
SET PNCH-CHSL-ALIGN 9PC
Automatic Center Punch
Single hand operation. Adjusts for light to heavy strokes. 5-1/4" long, 1/2"
dia. body.
PartNo
CRAFT 9-40541
Description
PNCH CNTR AUTO 5-1/4X1/2
Prick Punch
1 Center Punch •9-42862-1/2", 1 Prick Punch •9-42841-3/8", 2 Line-Up Tools 3/8" point. 4-1/2" length.
•9-42901-5/32", •9-42903-1/4", 2 Cold Chisels •9-42973-1/2"•9-42975-3/4"
PartNo
CRAFT 9-43045
PartNo
CRAFT 9-42841
Description
SET PNCH-CHSL HVY DTY 6PC
Phone: 402-455-6151
Toll Free: 800-488-9699
406
Description
PNCH PRCK 3/8PT 4-1/2
Hand Tools
Double Face Engineers Hammer 48 Oz.
Punches/Chisels
Scriber
PartNo
CRAFT 9-4078
Description
SCRBR MAG REV TIP
Hammers
Dead Blow Hammer Set 2 Pc.
Description
HMR ENG DBL FCE 15FGL HDL
HMR ENG DBL FCE 9FGL HDL
Hammer Set 5 Pc.
One 2 lb. (9-38394) and one 3 lb. (9-38395) Dead Blow Hammer with
urethane cast striking faces. Both have super grip fiberglass handles for safe,
non-slip use for less user fatigue.
PartNo
CRAFT 9-38085
PartNo
CRAFT 9-38261
CRAFT 9-38309
Description
SET HMR DEAD BLW 2PC 38085
Rubber Mallet 24 Oz. Replaceable Tip
Non-Marring
Includes 9-38292 (12 oz. Plastic Tip Hammer), 9-38464 (12 oz. Ball Pein
Hammer), 9-38465 (16 oz. Ball Pein Hammer), 9-38466 (24 oz. Ball Pein
Hammer), and 9-38467 (32 oz. Ball Pein Hammer).
PartNo
CRAFT 9-38074
Description
SET HMR BP 5PC
Adze Eye California Framer
Has adze eye “headliner shield” forged into head. Milled face. 17" hickory
handle with chevron grip and non marking tip. 23 oz. head.
PartNo
CRAFT 9-38162
All Steel California Framer Hammer
Comes with 1 white tip and 1 black tip. Hickory handle.
PartNo
CRAFT 9-38304
Description
HMR CAL ADZE EYE FRM 23OZ 11HD
Description
HMR RBR MALL TIP 24OZ
Hammer Set 3 Pc.
With Power plug shock absorbing core. Large milled face. 17" handle.
PartNo
CRAFT 9-38153
CRAFT 9-38154
Description
HMR CAL FRM 19OZ 17STL HDL
HMR CAL FRM 23OZ 17STL HDL
All Steel Curved Claw Hammer
Includes 9-38292 (12 oz. Plastic Tip Hammer), 9-38465 (16 oz. Ball Pein
Hammer), and 9-38466 (24 oz. Ball Pein Hammer).
PartNo
CRAFT 9-38459
Description
SET HMR BP 3PC
Drop forged steel head and handle. Hickory plug in head absorbs shock. Third
Claw™ pulls nails in tight places. Rib-reinforced claws add strength. Aircushioned, slip resistant grip for comfort. Head weight 16 oz., 12-3/4" handle.
Black Grip.
PartNo
CRAFT 9-38127
Phone: 402-455-6151
Toll Free: 800-488-9699
407
Description
HMR CRV CLW 16OZ 12-3/4STL HDL
Craftsman Tools
Engraves glass, china, ceramics, steel. Tip reverses for safety. Magnetic end
retrieves small parts.
Durable hardened and tempered, drop forged steel head. Large crowned face
and wide bevel. Heavy duty fiberglass handle with overstrike guard. Slip
resistant cushioned grip.
Hand Tools
Curved Claw Finishing Hammer
All Steel Rip Claw Hammer
Drop forged steel head with polished face and bevel. Best grade hickory
handle. Head weight 7 oz., 11-1/2" handle.
Craftsman Tools
Hammers
PartNo
CRAFT 9-38128
Drop-forged steel head and handle. Hickory plug in head absorbs shock.
Special, deep throat design for power strikes. Air cushioned, slip resistant
grip.
PartNo
CRAFT 9-38095
CRAFT 9-38273
CRAFT 9-38283
CRAFT 9-38284
Description
HMR RIP 16OZ 12-3/4STL HDL
HMR RIP 20OZ 14STL HDL
HMR RIP 22OZ 16STL HDL
HMR RIP MIL FCE 22OZ 16STL HDL
Description
HMR CRV CLW 7OZ 11-1/2HCK HDL
Dead Blow Hammer - 2 Lb. or 3 Lb.
Super duty Power Drive® Industrial grade Dead Blow hammer. Polyurethane
striking face allows a wide range of applications not possible with convention
PartNo
CRAFT 9-38394
CRAFT 9-38395
Blacksmith Hammer
Description
HMR DEAD BLW 2LB
HMR DEAD BLW 3LB 38395
Fiberglass Curved Claw Hammer
Third Claw™ pulls nails in tight places. Rib-reinforced claws add strength.
Synthetic rubber grip has chevrons for comfort. Head weight 16 oz., 13"
handle.
Drop forged, steel head. Large polished, crowned striking face. Beveled face
and ends. 15" Hickory handle. Head wt 2-1/2 lbs.
PartNo
CRAFT 9-38262
Description
HMR BLKSMTH HVY DTY 40OZ 15
PartNo
CRAFT 9-38126
Description
HMR CRV CLW 16OZ 13FGL HDL
Fiberglass Rip Claw Hammers
Bricklayers Hammers
Smooth contoured face. Special deep throat design. Synthetic rubber grip has
chevrons.
PartNo
CRAFT 9-3821
CRAFT 9-38094
Description
HMR RIP 16OZ 13-1/2FGL HDL
HMR RIP MIL FCE 20OZ 16FGL HDL
Full Octagon Fiberglass Hammer
Hardened and tempered, forged steel head with beveled striking face. Polished Full polished head with octagon neck and face. Steel wedged, epoxy sealed
face and bevel. Best grade hickory handle.
eye. Slip resistant grip, contoured for comfort. Head weight 20 oz., 14"
handle.
PartNo
CRAFT 9-38316
CRAFT 9-38315
Description
HMR BRICKLAYERS 16OZ
HMR BRICKLAYERS 24OZ
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-38129
408
Description
HMR OCT 20OZ 14FGL HDL
Hand Tools
Hickory Handle Ball Pein Hammers
Hammers
Half Hatchet Hammer
Cheeks ground smooth. Hickory handle. Finished in rust resistant black paint.
Description
HMR BP 4OZ HICK HDL
HMR BP 8OZ HICK HDL
HMR BP 12OZ HICK HDL
Hickory Rip Claw Hammers
Polished, drop forged steel head. Blade has 3-1/2" cut and handy nail pulling
slot. Best grade hickory handle. Head weight 22 oz.,
13" handle.
PartNo
CRAFT 9-48285
Description
HATCH 3-1/2CUT 22OZ 13HCK HDL
Hand Drilling Hammer
Special deep throat design. Headliner® steel shield adds strength; helps
reduce handle damage. Chevron grip for comfort. Soft, non-marring handle
cap for light tapping. Best grade hickory handle.
PartNo
CRAFT 9-38092
CRAFT 9-38090
CRAFT 9-38098
Description
HMR RIP 20OZ 16HICK HDL
HMR RIP MIL FCE 20OZ 13HCK HDL
HMR RIP MIL FCE 24OZ 17HCK HDL
Magnetic Tack Hammer
The right choice for striking cold chisels, punches, brick chisels. Drop forged
head with large, crowned striking face. 10" Hickory handle. Head wt. 3 lbs.
PartNo
CRAFT 9-38311
Description
HMR HND DRL 3LB 10HICK HDL
Hickory Curved Claw Hammer
Head is drop forged steel,
4-1/4" long. Magnetic face holds and sets tacks. Solid driving face. Head 5
oz., 11" handle length.
PartNo
CRAFT 9-38101
Description
HMR TACK MAG 5OZ 11HICK HDL
Plastic Replacement Tips
Forged, high carbon steel head. Third Claw™ pulls nails in tight places.
For Plastic Tip Hammers.
Exclusive rib-reinforced claws. Headliner® steel shield adds strength.
Chevron grip for comfort. Soft, non-marring handle cap. Head weight 16 oz.,
13" handle.
PartNo
Description
PartNo
CRAFT 9-38045
Description
HMR CRV CLW 16OZ 13HICK HDL
Phone: 402-455-6151
Toll Free: 800-488-9699
409
CRAFT 9-38301
CRAFT 9-38299
CRAFT 9-38296
CRAFT 9-38297
HMR PLS REPL TIP 6OZ HD
HMR PLS REPL TIP 6OZ SFT
HMR PLS REPL TIP 12OZ HD
HMR PLS REPL TIP 12OZ SFT
Craftsman Tools
PartNo
CRAFT 9-38461
CRAFT 9-38463
CRAFT 9-38464
CRAFT 9-38465
CRAFT 9-38466
CRAFT 9-38467
Hand Tools
Shingling Hatchet Hammer
Hammers
Craftsman Tools
Plastic Tip Hammer
Drop forged polished steel head. Crowned milled face. Nail slot and back
blade. Three hole gauge 4-1/2", 5" and 14.3 cm. Leather thong. Protective
blade guard. Hickory handle.
Forged, high carbon, quality steel head. Supplied with replaceable tips, one
soft red and one hard yellow. Hickory handle.
PartNo
CRAFT 9-38298
CRAFT 9-38292
PartNo
CRAFT 9-48281
Description
HATCH SHING 3HL GAUG HICK HDL
Straight Claw Finishing Hammer
Description
HMR PLS TIP 6OZ 10-1/2
HMR PLS TIP 12OZ 12-1/2
Rigbuilder Hatchet Hammer
Drop forged steel head with special deep throat design. Smooth contoured
face. Best grade hickory handle. Head weight 10 oz., 11" handle.
PartNo
CRAFT 9-38071
Designed for heavy construction. Polished head with extra-large milled face,
Blade has 3-1/2" cut and handy nail pulling slot. Best grade hickory handle.
Head weight 29 oz., 17" handle.
PartNo
CRAFT 9-48286
Description
HMR FINISH 10OZ 11HICK HDL
Tubular Curved Claw Hammer
Description
HATCH 3-1/2CUT 29OZ 17HCK HDL
Rubber Mallet
Tubular steel handle has shock absorbing hickory plug. Third Claw™ pulls
nails in tight places. Rib-reinforced claws add strength. Synthetic rubber grip.
Head weight 16 oz., 13" handle.
PartNo
CRAFT 9-38125
Description
HMR CRV CLW 16OZ 13STL HDL
Pry Bars/Pullers, Putty Knives/Scrapers
Putty Knives 1-1/4" Wide
Blade that extends length of handle for strength. Riveted hardwood handle.
Extra stiff has chisel edge.
Non-marring, natural rubber head resists oil and water. Shock absorbent 13"
hickory handle. Head wt 16 oz.
PartNo
CRAFT 9-45787
Description
HMR RBR MALL 16OZ 13HCK HDL
Rubber Replacement Tips
1/2" x 16".
Description
HMR RBR MALL REPL TIP WHT
HMR RBR MALL REPL TIP BLK
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
KNFE PUTTY 1-1/4 FLEX
KNFE PUTTY 1-1/4 STIFF
KNFE PUTTY 1-1/4 XSTIFF
Pry Bar
For Rubber Mallet 9-38304.
PartNo
CRAFT 9-38305
CRAFT 9-38306
PartNo
CRAFT 9-94814
CRAFT 9-94813
CRAFT 9-94815
PartNo
CRAFT 9-4283
410
Description
PRY BAR 1/2X16
Hand Tools
Files, Hand
File Set 14 Pc.
Pry Bars/Pullers, Putty Knives/Scrapers
Rip Bar
PartNo
CRAFT 9-37341
Scrapers
Craftsman Tools
3/4" x 17-1/4".
Description
PRY BAR 3/4X17-1/4
Includes 8" and 10" shoe rasps; 8" and 10" bastard cut mill files; 8" and 10"
bastard cut flat files; 8" and 10" bastard cut half-round files; 8" bastard cut
round file; 7" taper file; 4" and 6" x-tra slim taper files; 7" double x-tra slim
taper file; 6" round chain saw file.
PartNo
CRAFT 9-31228
Has flexible blade.
PartNo
CRAFT 9-94816
CRAFT 9-94817
File Set 17 Pc.
Description
SCRPR 3 STIFF
SCRPR 3 FLEX
Includes 8" shoe rasp; 5" tungsten point; 8" and 12" bastard cut mill files; 10"
bastard cut flat file;10" bastard cut half round file; 8" bastard cut round file;
10" flat Multi-Kut; 6" and 7" slim taper; 6" double extra-slim taper; 6 pc.
needle file set.
Steel Pull-N-Pry Bars
PartNo
CRAFT 9-37342
CRAFT 9-37353
Description
SET FILE 14PC
PartNo
CRAFT 9-31232
Description
SET FILE 17PC
File Set 25 Pc.
Description
PRY BAR PULL-N-PRY 2X15
PRY BAR PULL-NPRY 5/8X5-1/4
Steel Wrecking Bars
PartNo
CRAFT 9-37345
CRAFT 9-37346
CRAFT 9-37347
Description
PRY BAR STL 1/2X12
PRY BAR STL 3/4X24
PRY BAR STL 3/4X30
Tape Knives
Includes 8", 10" shoe rasp; 5" tungsten point; 6", 8", 10" and 12" bastard cut
mill files; 8", 12" bastard cut flat files; 6", 8" and 10" bastard cut round files;
10" flat Multi-Kut; 6" and 7" slim taper; 6" double extra-slim taper; 10" all
purpose file; 6 pc. needle file set.
PartNo
CRAFT 9-31233
Description
SET FILE 25PC
Handled File Set 3 Pc.
Includes 9-31310, 9-31311,
9-31312.
PartNo
CRAFT 9-31321
Handled File Set 5 Pc.
Has flexible blade.
PartNo
CRAFT 9-94818
CRAFT 9-94819
Description
SET FILE 3PC HDL
Includes 9-31211, 9-31303,
9-31310, 9-31311, 9-31312.
Description
KNFE TAPE 4
KNFE TAPE 4
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-31323
411
Description
SET FILE 5PC HDL
Hand Tools
Individual Files with Handle
Files
Needle File Set ’6 Pc.
Craftsman Tools
PartNo
CRAFT 9-31300
CRAFT 9-31302
CRAFT 9-31303
CRAFT 9-31310
CRAFT 9-31311
CRAFT 9-31312
Description
FILE MILL 6 HDL
FILE RND 6 HDL
FILE SLM TAP 7 HDL
FILE MILL 8 HDL
FILE HLF RND 8 HDL
FILE RND 8 HDL
Brushes
Bench Duster Brush
5-1/2" single cut files in assorted shapes.
PartNo
CRAFT 9-6757
Description
SET FILE NDL 5-1/2IN 6PC
Handled File Set ’7 Pc.
100% Horsehair.
PartNo
CRAFT 9-3667
Description
BRUSH BENCH DUSTER
Curved Handle Wire Brushes
13-3/4" long.
PartNo
CRAFT 9-3668
CRAFT 9-36471
Parts Cleaning Brush
Includes 9-31211, 9-31300,
9-31302, 9-31303, 9-31310,
9-31311, 9-31312.
PartNo
CRAFT 9-31227
Description
SET FILE 7PC W/HDL
Removes grease and dirt.
PartNo
CRAFT 9-41802
Description
BRUSH PARTS CLEANING
Shoehandle Wire Brush
Individual Files and Rasps
Mill Files. Flat Bastard Files. Half Round Bastard Files. Craftsman® Shoe
Rasps. Slim Taper Files. Craftsman® 7" Rotary Mower and Garden Tool File.
Double Extra Slim Taper File. Ignition File.
PartNo
Mill Files
CRAFT 9-31265
CRAFT 9-31263
CRAFT 9-31264
Flat Bastard File
CRAFT 9-31282
CRAFT 9-31257
Half Round Bastard Files
CRAFT 9-31277
CRAFT 9-31251
Shoe Rasps
CRAFT 9-31211
CRAFT 9-31286
Slim Taper Files
CRAFT 9-31274
CRAFT 9-31285
Rotary Mower/Garden Tool
File
CRAFT 9-31279
Double Extra Slim Taper File
CRAFT 9-31271
Ignition File
CRAFT 9-31205
Description
BRUSH WIRE CURV HDL
BRUSH WIRE CURV HDL W/SCRPR
Description
Without scraper. 10" long.
PartNo
CRAFT 9-3669
FILE MILL 6
FILE MILL 8
FILE MILL BAST 10
Description
SHOEHANDLE WIRE BRUSH W/O
Saws
Dual-Edge Blade Hand Saw 12-1/2"
FILE FLT BAST 8
FILE FLT BAST 10
FILE HLF RND BAST 8
FILE HLF RND BAST 10
FILE RASP SHOE 8
FILE RASP SHOE 10
FILE SLM TAP 6
FILE SLM TPR 7
One edge has 8 TPI for aggressive cutting, other edge has 15 TPI for
smoother cuts. Anti-friction blade coating, hardwood handle. Fits in most tool
boxes.
FILE DBL RTRY MWR 7
PartNo
CRAFT 9-36247
FILE DLB XSLM TPR 6
FILE IGNIT 5
Phone: 402-455-6151
Toll Free: 800-488-9699
412
Description
SAW HD DBL EDGE 8-15PT 12-1/2
Hand Tools
Flush-Cut Saw -
Saws
Hacksaw
Backsaw 16"
PartNo
CRAFT 9-36166
Bow Saw 30"
Description
SAW BACK 11PT 16
Front end grip, tension wheel. Cuts in 4 positions. Chrome plated tubular steel
tube is storage chamber for up to six extra blades. One 12" blade included.
PartNo
CRAFT 9-36143
Description
SAW FLUSH CUT 12
Flush-Cutting Saw -
Lever holds blade at proper tension. Strong, lightweight, 1" oval shaped
tubular steel frame. Blade guard.
PartNo
CRAFT 71-85329
Description
SAW BOW TUBE STL 30
Adjustable Saw -
Features a quick-release blade with self-adjusting tension. Cuts in 4 positions.
Front-end grip provides additional control. Can be used as jab saw.
Aluminum, steel frame; enclosed handle. 12" blade included.
PartNo
CRAFT 9-36144
Hacksaw
Hacksaw
Description
SAW FLUSH CUT QR BLD 12
Hacksaw Blades
Carbon steel blades for cutting mild steel, copper, brass, aluminum.
PartNo
CRAFT 9-92595
CRAFT 9-92596
Hand Saws
Description
SAW HACK BLD 18PT 12
SAW HACK BLD 24PT 10
Nickel-plated steel frame, high-impact (ABS) plastic encl. handle. Cuts in 4
positions. Holds 10" to 12" blade.
PartNo
CRAFT 9-36142
Description
SAW HACK BLD 10-12
Hardened carbon steel for longer life. Use 8 point for fast cutting operations
and 13 point for smoother cuts. Wood handle.
Drill Saws
Have a flared sharp fluted tip to start the hole and a spiral hardened shaft with
teeth for cutting. For drywall, plaster, wood, plywood, masonite, particle
board, plastic and rubber. Hardened plastic, ribbed handles.
PartNo
CRAFT 9-36024
CRAFT 9-36025
Description
SAW DRILL DRYWALL 3/16X8
SAW DRILL DRYWALL 1/4X12
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-36243
CRAFT 9-36242
CRAFT 9-36241
CRAFT 9-36246
CRAFT 9-36245
CRAFT 9-36244
Replacement Blades
For 9-85329 (not shown). Tapered blade - cuts on push and pull strokes.
PartNo
CRAFT 71-85330
413
Description
SAW HD 8PT 24
SAW HD 8PT 20
SAW HD 8PT 15
SAW HD 12PT 24
SAW HD 12PT 20
SAW HD 12PT 15
Description
BLD REPL SAW BOW 30
Craftsman Tools
11 Teeth per inch. Flat ground blade, hardwood handle.
Hand Tools
Lockback Knife 4"
Saws
Craftsman Tools
Utility Hacksaw
Aluminum frame. Uses standard hacksaw blades.
PartNo
CRAFT 9-36145
Description
SAW HACK UTIL STND SZ
Stainless steel blade locks open, thumb pressure releases lock while you
carefully close blade. Laminated hardwood handle. Polished solid brass
bolsters.
Utility/Pocket Knives
Lockback Knife 3"
PartNo
CRAFT 9-95232
Lockback Knife 4-15/16"
bolsters.
PartNo
CRAFT 9-95231
Description
KNFE PKT LCKBACK 4
Description
KNFE PKT LCKBACK 3
Lockback Knife 3-3/4"
bolsters. Comes with Leather sheath with snap button fits up to 2" belts.
PartNo
CRAFT 9-95233
Description
KNFE PKT LCKBACK 4-15/16
Dogleg Jack Knife
Glass filled Zytec® plastic handle. Nylon belt sheath with hook and loop
closure.
PartNo
CRAFT 9-95230
Description
KNFE PKT LCKBACK 3-3/4 PLS HDL
Work Knife 3-5/8”
Compact, easy to carry knife measures only 3-5/8” when closed. Stud lets you 2-13/16" Long.
open the blade smoothly and easily with 1 hand. Blade locks into place for
safe, secure use.
PartNo
PartNo
CRAFT 9-45563
Description
KNF PKT WRK 2 1/2IN BLD
Phone: 402-455-6151
Toll Free: 800-488-9699
CRAFT 9-95236
414
Description
KNFE PKT DOGLEG JCK 2-13/16
Hand Tools
Pen Knife
Electrician’s Knife
PartNo
CRAFT 9-95241
Craftsman Tools
2-5/8" Long.
Description
KNFE PKT PEN 2-5/8
Plastic Scoring Replacement Blades
3-11/16". Stainless steel blades, Delrin® plastic handle. Solid nickel-silver
alloy bolsters. Heavy duty shackle. Made in the U.S.A.
PartNo
CRAFT 9-95237
Description
KNFE FOLD ELEC 3-11/16
High-Visibility Utility Knife
2 per package.
*Blades not Craftsman branded
PartNo
CRAFT 9-42036
Cast aluminum. adjusts to 3 cutting positions. 3 blades in handle.
PartNo
CRAFT 9-94875
CRAFT 9-94876
Replacement Blades
Description
KNFE UTIL RETRACT HIVIS YLW
KNFE UTIL RETRACT HIVIS ORN
Hook Replacement Blades
Heavy duty, .025" cutlery steel.
5 per package.
PartNo
CRAFT 9-94858
Description
BLADE REPL HOOK STYLE, 5 PK FOR UTILITY KNIFE
Linoleum Knife
PartNo
CRAFT 9-94857
CRAFT 9-94859
Description
KNFE LINOLEUM WD HDL
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
BLADE,REPL,STRAIGHT,5PK F/ UTILITY KNIFE
BLD REP UTIL 100PK
Visit Us At
www.johnday.com
Wood handle. Hawk bill.
PartNo
CRAFT 9-94855
Description
BLD REPL PLS SCORING 2PK
415
Hand Tools
Dual Power Manual Stapler/Staples/Brad Nails
Craftsman Tools
Stock Knives
Easy-squeeze. High-Low setting for hard and soft woods. Cushioned bumper.
Window shows staple size. Includes 3/8" staples.
Stainless steel blades. Laminated hardwood handles. Polished solid brass
bolsters.
PartNo
CRAFT 9-95234
CRAFT 9-95235
Description
KNFE PKT STOCK 3-1/4
KNFE PKT STOCK 4
Description
STAPL MAN DUAL PWR
NAIL BRAD 18GA 1-3/16 5000
NAIL BRAD 18GA 1-3/16 5000
NAIL BRAD 18GAUG 1 5000PK
NAIL BRAD 18GAUG 3/4 5000PK
Electric Stapler
Utility Knife - 3 Position Blade
3-position blade for cutting, scraping. 3 extra blades store in handle. Cast
aluminum.
PartNo
CRAFT 9-94854
PartNo
CRAFT 9-68447
CRAFT 9-27214
CRAFT 9-27214
CRAFT 9-27215
CRAFT 9-27215
CRAFT 9-27216
CRAFT 9-27216
CRAFT 9-27218
CRAFT 9-27218
Description
KNFE UTIL ALUM
Heavy-duty 9-amp drive coil quickly drives one fastener per second. Features
soft grip handle. 100-fastener capacity. Includes carrying case. 8-foot 3-wire
cord. UL listed. Imported. For heavy-duty stapling applications. Rapid-fire
stapler uses 3/16" wide staples from 5/16" to 9/16" long.
PartNo
CRAFT 9-27231
Utility Knife - Front Loading
Description
PWTL ELEC STAPL 3/16WD
Front-loading retractable blades. 3 blade positions. 2 extra blades store in
handle. String cutting feature. Cast aluminum.
PartNo
CRAFT 9-94853
Description
KNFE UTIL RETRCT ALUM
Staplers/Nailers
Brad Nailer
Heavy-duty 9-amp drive coil quickly drives one fastener per second. Features
soft grip handle. 100-fastener capacity. Includes carrying case. 8-foot 3-wire
cord. UL listed. Great for a variety of wood working projects. Rapid-fire
nailer uses four sizes of T-head brads - from 3/8" to 1-3/16".
PartNo
CRAFT 9-27233
Description
PWTL ELEC NAIL BRAD T-HD
Phone: 402-455-6151
Toll Free: 800-488-9699
416
Your Midwest
Distributor for
over 96 Years
Hand Tools
Narrow Crown Staples
Staplers/Nailers
Forward Drive Stapler/Brad Nails/Staples
Craftsman Tools
For 9-68434 and 9-68515. Box/1000
Applies pressure directly over work surface for more efficient use, compared
to rear action staplers.
PartNo
CRAFT 9-68515
CRAFT 9-68467
CRAFT 9-68467
CRAFT 9-68468
CRAFT 9-68468
Description
STAPL MAN FORW DRV PRO
NAIL BRAD 1/2 500PK
NAIL BRAD 1/2 500PK
NAIL BRAD 5/8 500PK
NAIL BRAD 5/8 500PK
Hammer Tacker
PartNo
CRAFT 9-74411
CRAFT 9-74411
CRAFT 9-74414
CRAFT 9-74414
CRAFT 9-74412
CRAFT 9-74412
Description
STAPL CRWN NRW 1/4 1000PK
Staples
Steel construction with thick rubber grip helps to absorb shock. Drives 1/4",
5/16" and 3/8" narrow crown staples.
PartNo
CRAFT 9-68434
Description
HMR TACKER CRWN STAPL
Manual Staple/Nail Gun
For Craftsman Professional™ Manual Staple/Nail Gun
(9-27227), Craftsman Variable Power Stapler/
Nailer (9-68496), Craftsman Dual Power Manual Stapler
(9-68447). 0.050 steel, 1/2" wide. Pkg of 5000.
Drives 5 staple sizes (1/4" thru 9/16") and 2 brad nail sizes (1/2" and 5/8").
Easy-squeeze drive. High/Low power settings. Includes cable/screen
attachment.
PartNo
CRAFT 9-27227
Description
STAPL/NAIL MANUAL PRO
Phone: 402-455-6151
Toll Free: 800-488-9699
417
PartNo
CRAFT 9-27213
CRAFT 9-74453
CRAFT 9-74453
CRAFT 9-27212
CRAFT 9-74722
CRAFT 9-74722
CRAFT 9-27211
CRAFT 9-74456
CRAFT 9-74456
CRAFT 9-74457
CRAFT 9-74457
Description
STAPL 3/8 .035STL 5000PK
STAPL PWR/MAN 5/16 5000PK
Hand Tools
Torpedo Level 9"
Variable Power Stapler/Nailer
Aluminum I-beam frame with 1 magnetic, 1
v-grooved edge.
Staplers/Nailers
PartNo
CRAFT 9-39829
Description
LVL TORPEDO MAG 9
Craftsman Tools
Aluminum Framing Square - Aluminum Finish
Uses 5 staple sizes, 2 brad nail sizes. Variable power for penetration of hard
materials; lighter drive for soft or thin materials. Easy to load base allows
flush finishing within 3/16" of vertical surfaces. Lexan® plastic housing. UL
listed. AC.
PartNo
CRAFT 9-68496
Levels
Level 12"
Description
PWTL ELEC STAPL/NAIL BRAD
PartNo
CRAFT 9-39607
Description
LVL 4VIAL ALUM 12IN
Case for Levels 48"
Polyethylene. Twist snap case top. Drainage holes.
PartNo
CRAFT 9-39914
Description
SQ FRMNG 16X24 ALUM
Aluminum Framing Square - Black Finish
Convenient size for your tool box. This level has 2 vial level, and 1 vial
plumb.
PartNo
CRAFT 9-39861
Aluminum finish with black markings. 16" x 24" aluminum framing square
has a 24" x 2" body, 16" x 1-1/2" tongue. Permanently stamped numbers and
graduations. 1/8" grad. scales.
Description
CASE LVL 48 POLY
Black finish with white markings. 16" x 24" aluminum framing square has a
24" x 2" body, 16" x 1-1/2" tongue. Permanently stamped numbers and
graduations. 1/8" grad. scales.
PartNo
CRAFT 9-39615
Block Plane
Description
SQ FRMNG 16X24 BLK
Lets you chamfer with one hand. Steel blade cutter sets at 21° angle for
planing small surfaces. 7" long. 1-5/8" steel blade. Made in England.
Pocket Level 5"
PartNo
CRAFT 9-37161
Description
PLANE BLCK 1-5/8CUT 7
Brass Stair Gauge
Has top-read vial.
PartNo
CRAFT 9-3971
Description
LVL PKT 5IN
Inspectors Torpedo Level 9"
Angle or stair gauge is ideal for rafter or framing squares and repeating
With pitch vial measures from level to 1/4" per foot. Top reading. Aluminum. angles. Pkg. of 2.
PartNo
CRAFT 9-39882
Description
LVL TORPEDO INSP 9
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-39563
418
Description
GAUG STAIR BRASS 2PK
Hand Tools
LaserTrac™ Level with Carrying Case and
Laser Enhancing Glasses
Levels
Combination Squares - 16" or 12"
CRAFT 9-39567
12 IN COMB SQ SPEC F/CUS.T
PartNo
CRAFT 9-48247
Electronic Stud/Joist Sensor
Line Level Set
Single depth scan of 3/4". Fully automatic calibration, LED display with
audio horn to indicate stud edge.
PartNo
CRAFT 9-49031
Description
SET LVL LASER 5PC
Description
STUD/AC WIRE FNDR 3/4IN DP
Heavy Duty Aluminum Levels
Includes standard line and pitch line level.
PartNo
CRAFT 9-39894
Description
SET LVL LINE PITCH
Rafter Marking Squares - 12" or 7"
Made of solid aluminum I-beam construction. Special pitch vial reads from
level to 1/2" per foot pitch in 1/8" increments. Protected acrylic vials. Shock
absorbing rubber end caps helps protect frame. Top read windows simplify
tool use. V-groove edge for use on pipe.
PartNo
CRAFT 9-39897
CRAFT 9-39898
Description
LVL 3 VIAL 24 ALUM
LVL 4 VIAL 48 ALUM
Lays out common, jack, hip or valley rafters. Heavy-duty extruded aluminum.
Laser Torpedo Level
PartNo
CRAFT 9-39602
CRAFT 9-39601
Built-in leveling base, swing-out leveling feet, adjustable leveling screw.
Laser reference ridge on side of unit. Two precision vials: one level and one
circular plumb. Provides 1/4" @ 50' accuracy horizontal, 1/4" @ 20' accuracy
vertical. 100' working range. Die-cast aluminum base.
PartNo
CRAFT 9-48045
Description
LVL LASER TORPEDO
Phone: 402-455-6151
Toll Free: 800-488-9699
419
Description
SQ RAFT MARKNG 12IN
SQ RAFT MRKNG
800-488-9699
Craftsman Tools
Has 1" blade with precision ground edges and milled head. Incl. self-aligning
LaserTrac™ level is a highly versatile laser tool that replaces the traditional
drawbolt.
pencil, carpenter’s mark and chalk line. Includes precision leveling base,
PartNo
Description
CRAFT 9-39681
SQ COMB BLD 16
tripod mount base, wall mount marking base.
Hand Tools
Universal Protractor
Levels
Craftsman Tools
Smart Laser Plus
24" Digital level/laser combination with exclusive Craftsman Advantage
angle copy mode. All of the features of the Craftsman® Smart Tool Plus, with
the addition of a high visibility red laser for long distance work. For
indoor/outdoor use. Includes 9-volt alkaline battery, 2 AAA batteries and a
rugged padded nylon protective carrying case.
PartNo
CRAFT 9-39755
Description
LVL SMART LASER PLUS 24
Smarttool Plus
Magnetic back and base. 90° angle fits corners for 2 way readings. Two
movable indicators rotate 360°.
PartNo
CRAFT 9-39830
Description
PROTR UNI MAG 90ANGLE
Universal Protractor with Pendulum Indicator
Digital level with Craftsman Advantage angle copy mode. Beeps at any preset
angle. Digitally displays degrees, percent of slope and pitch (rise and run) to
1/10° accuracy. Solid acrylic block vials. Push button calibration. Includes 9volt alkaline battery.
PartNo
CRAFT 9-39756
CRAFT 9-39758
CRAFT 9-39757
Description
LVL SMARTTOOL PLUS 6-1/2
LVL SMARTTOOL PLUS 48
LVL SMARTTOOL PLUS 24
Solid Aluminum Torpedo Level
Magnetic back and base attaches to steel squares or door jambs. Exclusive 90°
angle fits corners for two-way readings. Two movable indicators rotate 360°
for comparison readings. Pendulum indicator allows for easy readings.
Measures or repeats angles with ± 0.5° accuracy.
PartNo
CRAFT 9-39840
Description
PROTR UNI MAG 90ANGLE
Tape Measures
Locking Tape Measure 1/2” x 12’
Torpedo level - solid aluminum.
PartNo
CRAFT 9-39819
Description
LVL TORP ALM
Solid Brass Plum Bob
PartNo
CRAFT 9-40104
CRAFT 9-40105
Description
PLUMB BOB 16OZ BRASS
PLUMB BOB 24OZ BRASS
Polycarbonate ABS case. Extra-rigid 3 colored steel blade is acrylic-coated.
Stud and truss markings. Tough-tip® blade protector. Blade lock and extra
large removable belt clip.
Stud Finder, Deep Read
Detects/differentiates wood, metal and live wire simultaneously through
drywall, tile, plaster and other common wall materials. Easy-to-read display
for visual and audio detection of stud positions.
PartNo
CRAFT 9-49032
Description
STUD/JOIST FNDR 3/4IN DP 49032
Phone: 402-455-6151
Toll Free: 800-488-9699
420
PartNo
CRAFT 9-39698
Description
TAPE MEAS LCK 1/2X12
PartNo
CRAFT 9-39678
Description
TAPE MEAS BTM LCK 1X25
Bottom Lock Tape Measure 1” x 25’
Hand Tools
Locking Tape Measure 3/4” x 20’
Tape Measures
Locking Tape Measure 1” x 25’
PartNo
CRAFT 9-39674
PartNo
CRAFT 9-39697
Replacement Tape Measure Blades
Description
TAPE MEAS LCK 1X25
Locking Tape Measure 1” x 30’
Craftsman® replacement blades for locking tapes. Fit Craftsman, Companion,
Sears and other brands. Replace with same size as original. Includes
illustrated step-by-step instruction sheet.
PartNo
CRAFT 9-39520
CRAFT 9-39523
CRAFT 9-39524
CRAFT 9-39522
CRAFT 9-39521
PartNo
CRAFT 9-39676
Description
TAPE MEAS LCK 3/4X20
Description
BLD MEAS REPL 1X30
BLD MEAS REPL 1X25
BLD MEAS REPL 1X8M/26
BLD MEAS REPL 3/4X20
BLD MEAS REPL 1/2X12
Steel Tape Measure
Description
TAPE MEAS LCK 1X30
Locking Tape Measure 1” x 8M/26’
3/8" wide and 100 ft. long. Double roller mouthpiece, leatherette vinyl clad
steel case.
PartNo
CRAFT 9-39002
Description
TAPE MEAS WIND 3/8X100
Wood Folding Rules
PartNo
CRAFT 9-39675
Description
TAPE MEAS LCK 1X8M/26
Phone: 402-455-6151
Toll Free: 800-488-9699
5/8" x 6'. 1/16" graduations imbedded in slats.
PartNo
CRAFT 9-39310
421
Description
RULE WD FOLD 6FT
Craftsman Tools
Hand Tools
Rolling Wedge Bar
Tape Measures
Wood Folding Rules
Craftsman Tools
PartNo
CRAFT 9-39311
90° polished rolling head. Measures 16" long. 9/16" diameter.
PartNo
CRAFT 9-42892
Description
RULE WD FOLD 6IN EXTEN 6FT
Trade Tools
Fuse Puller/Wedge Bar/Riveters
Aluminum Rivets 1/8" Diameter
PartNo
CRAFT 9-74633
CRAFT 9-74634
Description
WDGE BAR ROLL 16
Electrical
Strippers/Crimpers
Stripper/Cutter 10 AWG Romex®
Description
RVT ALUM 1/8X1/8 100PK
RVT ALUM 1/8X1/4 100PK
Rivet Assortment 1/8" Diameter
Assortment of 120 rivets.
PartNo
CRAFT 9-74637
Description
RVT ASST ALUM-STL 120PK
PartNo
CRAFT 9-74629
CRAFT 9-74630
Description
RVT STL 1/8X1/8 30PK
RVT STL 1/8X1/4 25PK
Steel Rivets 1/8" Diameter
Strips outer jacket and solid wires of 10/2 type NM Romex® cable. 3-stage
cutter reduces effort to cut wire and insulation. Tough steel construction is
strong and durable.
Heavy-Duty Riveter with Ratcheting Head
PartNo
CRAFT 34-73583
Description
STRPR/CUT WIRE 10/2 PRO
Cable Stripper Cutter Set 2 Pc.
Rugged die-cast aluminum. Features head that rotates 360° for use at any
angle. Rubber grips provide operating comfort and control. Includes 4
nosepieces for setting rivet sizes, 3/32", 1/8", 5/32" and 3/16". Nose pieces
store in handle.
PartNo
CRAFT 9-74749
Description
RVTR RAT HD 4RVT SZ HVY DTY
Industrial Riveter
Dual Romex® Up-Front Wire Stripper/ Cutter Pliers
(34-73756) & 10 AWG Romex® Stripper/Cutter (34-73583)
PartNo
CRAFT 34-73588
Sets 1/8", 3/16" and 5/32" aluminum rivets and 1/8" stainless steel rivets. Die
cast metal with comfort grip, cushioned handle. Removable ejector spring for
automatic mandrel removal. Includes 3/32", 1/8", 5/32", and 3/16" nosepieces.
PartNo
CRAFT 9-74755
Description
SET STRPR/CUT WIRE PRO 2PC
Crimper Set 3 Pc. Mini Up-Front Wire Cutter,
Stripper & Crimper
Description
RVTR 4RVT SZ IND
Plastic Fuse Puller
For adjusting switch and fuse clips. Shock-proof, plastic, solid grip jaws.
Double-ended, reversible. For fuses 0 to 200 Amp, 250 Volt; 0 to 100 Amp,
600 Volt. Pocket size.
PartNo
CRAFT 34-73638
Description
PULL FUSE PLS
Phone: 402-455-6151
Toll Free: 800-488-9699
422
Long, curved cutter, pliers. Stripper pliers strip insulation jacket from 10-22
AWG stranded and 8-18 AWG solid wire. Crimper crimps 10-22 AWG
insulated and non-insulated connectors.
Vinyl pouch.
PartNo
CRAFT 34-73579
Description
SET STRPR/CRMP/CUT 3PC MINI
Trade Tools
Electrical Repair Tool
Electrical
Strippers/Crimpers
Stripper Set 4 Pc. Coaxial/Romex®/Wire
Stripper
PartNo
CRAFT 34-82563
Description
STRPR/CRMP/PLR ELEC MULT TL
Stripper for Copper Wire for Solid AWG #16 #26 Wire
Set includes 34-73577 coax cable cutter/stripper,
34-73576® stripper/cutter pliers and 34-73573 10-20 and 34-73574 AWG
ergonomic wire strippers. A complete set for the maintenance man.
PartNo
CRAFT 34-73589
Description
SET STRPR/CUT WIRE PRO 3PC
For solid AWG #16 - #26 wire. Black oxide finish, plier nose and looping
hole. Power spring return, air pocket cushioned grips. Lock keeps blades
closed.
Description
Coax Up-Front Cable Stripper/Crimper/ Cutter PartNo
CRAFT 34-82544
STRPR COPPER 18-28AWG
Tool
Stripper for Copper Wire for Stranded AWG
#10 - #18 Wire
For stranded AWG #10 - #18 wire. Black oxide finish, plier nose and looping
hole. Power spring return, air pocket cushioned grips. Lock keeps blades
Pliers strip outer insulation jackets from RG-6 and RG-59 wire. Stripping hole closed.
removes insulation from shielded center conductor wire. Crimps RG-6U and PartNo
Description
CRAFT 34-82543
STRPR COPPER 10-18AWG
RG-59U male coax connectors. Includes five RG-6U and five RG-59U
connectors.
PartNo
CRAFT 34-73577
Up-Front Wire Cutter/Stripper
Description
STRPR/CRMP/CUT COAX
Dual Romex® Up-Front Wire Stripper/ Cutter
Pliers
Stripper stations for 12/2 and 14/2 AWG type NM cable wire. Two additional
stripping holes for individual conductor wires. Locks shut. Holes for looping
wire and bolt cutting. Spring loaded action. Nose for pulling wire and
working small nuts.
PartNo
CRAFT 34-73576
Description
STRPR/CUT/PLR 12/2,14/2AWG PRO
800-488-9699
10-18 AWG up-front stripper for solid copper wire only. Large easy to read
application indicators, tough steel construction, high luster black oxide finish
to resist rust/corrosion.
PartNo
CRAFT 34-73572
Up-Front Wire Stripper/Cutter Pliers for 10-20
AWG Wire
For 10-20 AWG wire. Long curved cutter. Locks shut. Holes for looping wire
and bolt cutting. Nose for pulling wire and small nuts.
PartNo
CRAFT 34-73573
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
STRPR/CUT WIRE
423
Description
STRPR/CUT WIRE 10-20AWG PRO
Craftsman Tools
Large easy-to-read application indicators. Vinyl covered handles with
cushioned grips. Plier nose for pulling and looping wire. Cut wire - tool is
preset for positive closing of cutter. Strip wire for 10-22 AWG wire, copper
and aluminum, solid or stranded. Crimp non-insulated and insulated terminals
and splices. Crimp ignition terminals - notch marked “7-8mm Auto”. Cut and
rethread bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. 8" long.
Trade Tools
Craftsman Tools
Electrical
Strippers/Crimpers
Up-Front Wire Stripper/Cutter Pliers for 20-32
AWG Wire
For 20-32 AWG wire. Long curved cutter. Locks shut. Holes for looping wire
and bolt cutting. Nose for pulling wire and small nuts.
PartNo
CRAFT 34-73574
Description
STRPR/CUT WIRE 20-30AWG PRO
Wire Cutter/Stripper
Electrical Tools
Clamp-On Ammeter 600A AC
1.25” current jaw opening for non-invasive AC current measurements to
600A. Test lead input for AC/DC voltage measurements plus resistance
including continuity beeper. Peak Hold captures in-rush currents and Data
Hold freezes reading in the display. Comes complete with test leads, alligator
clips, and carrying case.
PartNo
CRAFT 34-82180
Description
METER AM CLMP 600A AC
AC Line Splitter
Professional wire stripper cuts 10-18 gauge wire, stranded or solid. The
ergonomically designed textured grips help reduce stress and fatigue while the
“thumb guide” push pad provides added comfort and control. There is also a
sliding lock for secure lock for secure closure.
PartNo
CRAFT 34-73653
Description
STRPR/CUT WIRE PRO
Wire Cutting/Stripping/Tester
Enables use of a clamp meter to safely measure AC current on a 2- or 3-wire
power cord to 15 Amps. The Line Splitter separates the hot/live conductor
from the neutral (and ground) without the need to cut off the plug and separate
the conductors. One opening provides a one-to-one current reading and the
other provides a time-ten (X10) reading so that small current will display with
better resolution on a clamp meter. Also features 2 test jacks for your
multimeter test leads to check AC voltage.
Six precision ground stripper stations for 10-22 AWG stranded and solid wire.
Long curved cutter for insulation and wire. Anvil cutter on nose. Crimps 1022 AWG insulated and non-insulated wire connectors. Crimps 7-8mm auto
ignition wire. Five bolt cutting/sizing stations and deteltor.
PartNo
CRAFT 34-73585
PartNo
CRAFT 34-81066
Description
ELEC LINE SPLTR
AC Voltage Detector
Description
SET STRPR/CUT WIRE TSTR2PC
Non-contact detector indicates live (hot) AC circuits with a flashing light and
audible beeper. Tip easily fits into outlets. Senses voltage from 100 to
300VAC on 50/60Hz circuits. Pen size with pocket clip. Powered by two
“AAA” batteries (not included).
Phone: 402-455-6151
Toll Free: 800-488-9699
424
PartNo
CRAFT 34-82174
Description
DETECT AC VOLT
Trade Tools
High Temperature Infrared Thermometer with
Laser Pointer
Electrical
Electrical Tools
Autoranging Compact Multimeter with
Temperature
Craftsman Tools
Measures surface temperatures that are out of reach or too hot to contact.
Measures from 0-1000° F or -18 to 538° C with ±2% error. 1-button operation
with backlighting indicates temperature instantly. Measuring ration 1:8 target
to distance, accurate to 6 feet.
Full function autoranging with manual range override has ±1% basic DC
accuracy, also features 2000 count LCD display with data hold, range hold
functions, and auto power off. Additional temperature, capacitance and
frequency measurements including duty cycle tests and relative zero
functions.
PartNo
CRAFT 34-82139
PartNo
CRAFT 34-81067
Description
THERM HITEMP INFRD W/LSR
Hygro-Thermometer + Infrared Thermometer
Description
METER MULTI AUTO RANG CMPCT
Autoranging Digital Multimeter with
Temperature
Combination humidity and air temperature, plus IR thermometer for noncontact temperature measurement in difficult to reach locations. Infrared
thermometer has built-in laser pointer and 8:1 distance to target ratio. 0.95
fixed Emissivity. Dual display - primary display is user selectable for IR or
humidity; secondary always displays ambient temperature. Remote humidity
sensor with 39” (1m) coiled cable provides readings for both humidity and
ambient temperature.
Full function autoranging multimeter with Temperature (probe included) and
Frequency measurements. Manual and Autoranging models feature ±0.5%
basic DCV accuracy and large 2000 count backlit LCD displays. Input
overload and fused current protection is enhanced with Input Shutter
protection to prevent function/test lead connection mismatches. Includes
measurement functions of AC/DC voltage, AC/DC current, resistance,
capacitance, temperature, diode and continuity test. Data Hold freezes the
reading in the display. Backlighting permits viewing of the display in dimly
lighted areas. Includes protective rubber holster and test leads.
PartNo
CRAFT 34-82175
Description
METER MULTI AUTO RNG W/TEMP
Phone: 402-455-6151
Toll Free: 800-488-9699
425
PartNo
CRAFT 34-82358
Description
THERM HYGRO W/ LSR PNTR
800-488-9699 or visit
www.johnday.com
Trade Tools
Manual Ranging True RMS Digital Multimeter
Craftsman Tools
Electrical
Electrical Tools
Infrared Thermometer with Laser Pointer
True RMS multimeter has a 0.5% basic DC accuracy. 2000 county, large
backlit display. Functions include AC/DC voltage, AC/DC current, resistance,
temperature, diode and continuity. 1.5V and 9V battery test. Data Hold
“freezes” current display. Rugged design includes protective holster with builtin stand which flips up to be used as a hanger.
Measures surface temperatures that are out of reach or dangerously hot. 1button operation with laser pointer tracks aim. Measuring ratio 1:6 target to
distance (1” spot at 6”). Accurate to 6 feet. Measures -58 to 518° F or -20 to
270° C with 2.5% accuracy.
PartNo
CRAFT 34-82327
PartNo
CRAFT 34-81077
Description
METER MULTI TRUE RMS
Multimeter with Laser Pointer
Description
THERM INFRD W/LSR POINT
Manual Ranging Digital Multimeter with
Temperature
Measures temperatures from -4 degrees to +518 degrees (F) without contact.
Perfect for items that are too hot or moving. Ergonomically designed for a
better grip. Low current capability measures down to 0.1 microamp. Basic
DCV accuracy of 0.5%.
Full function manual ranging multimeter with temperature (probe included)
and frequency measurements. Manual and Autoranging models feature ±0.5%
basic DCV accuracy and large 2000 count backlit LCD displays. Input
overload and fused current protection is enhanced with Input Shutter
protection to prevent function/test lead connection mismatches. Includes
measurement functions of AC/DC voltage, AC/DC current, resistance,
capacitance, temperature, diode and continuity test. Data Hold freezes the
reading in the display. Backlighting permits viewing of the display in dimly
lighted areas. Includes protective rubber holster and test leads.
PartNo
CRAFT 34-82170
Description
METER MULTI MAN RANG W/TEMP
Phone: 402-455-6151
Toll Free: 800-488-9699
426
PartNo
CRAFT 34-81076
Description
METER MULTI W/ LSR
Hand Tools That
Yield the Results
You Demand!
Trade Tools
Electrical
Electrical Tools
Multimeter, Digital, with 8 Functions and 18
Ranges
True RMS 600A AC/DC Clamp-On Ammeter
Manual-ranging multimeter with large 2000 count LCD display, diode test
and continuity beeper. 1.5 and 9V battery test. Fuse protected with a rubber
holster with tilt stand. Measures up to 600V AC and 10A AC for electrical
installation, home, appliance repairs. Measures up to 600V DC and 10A DC
for auto, marine and electronic installations/repairs.
PartNo
CRAFT 34-82141
PartNo
CRAFT 34-82353
Description
METER AM CLMP 600AC/DC RMS
True RMS Auto-Ranging Multimeter
Description
METER MULTI MAN RANG DIG
Test Lead Kit with Storage Pouch
Features non-contact infrared thermometer. Shows correct test lead location
for each measurement. Measures AC/DC voltage/current, resistance,
frequency, duty cycle, contact/non-contact temp. Basic DCV accuracy of
0.3% CAT III.
PartNo
CRAFT 34-81079
Description
METER MULTI ELEC AUTO RNG
Plumbing Tools
Banana plug to banana plug leads fit all meters and accept accessories. Heavy
duty test probes are rated category III for 600 volts. Alligator clips attach to
test probes/clips on circuits.
PartNo
CRAFT 34-82399
Pipe Wrenches
Strap Wrench Set 2 Pc.
Description
TEST LEAD KIT
Large handle manages up to 6-3/8" diameter; small handle manages up to 4”
diameter.
800-488-9699
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-45570
427
Description
SET WR STRAP 2PC
Craftsman Tools
AC/DC version of the
34-82180 with True RMS measurements. Measures AC/DC Current and
Voltage plus Temperature. True RMS provides accuracy on non-sinusoidal or
distort waveforms. Large 4000 count LCD display. Comes complete with test
leads, alligator clips, and carrying case.
Trade Tools
Master Tap Socket Set 11 Pc.
Plumbing Tools
Craftsman Tools
Heavy Duty Cast Iron Pipe Wrenches
Flat and coil spring design for immediate gripping and excellent ratchet
action. Dual heat-treated jaws and machined-sharp jaw teeth.
PartNo
CRAFT 9-51651
CRAFT 9-51652
CRAFT 9-51653
Description
WR PIPE 1-1/2CAP 10
WR PIPE 2CAP 14
WR PIPE 2-1/2CAP 18
Tubing Cutters
Pipe and Tubing Cutter
Perfect for places a T-handle tool won’t fit. Eleven sockets fit all numbered
and fractional MCTI standard taps through 3/4". Also fits 1/8" NPT taps and
metric taps through 18mm.
3 - 1/2” DR SOCKETS, 4 - 3/8” DR SOCKETS, 4 - 1/4” DR SOCKETS,
Vinyl holder.
PartNo
CRAFT 9-47764
Description
SET TAP MSTR SKT 11PC
Carbon Standard or Metric Steel Tap and Die
Set 39 Pc.
Large hardened flared groove rollers. Deburrer has positive lock with two
cutting edges.
T-handle design Hardened acme threads. Tubing capacity 3/8" to 2-5/8". Pipe
capacity 3/8" to
1-1/4".
PartNo
CRAFT 9-51269
Description
CUT PIPE/TUBE PRO 2-5/8- 1-1/4
Tap/Dies
Carbon Steel Tap and Die Set 107 Pc.
Standard Tap and Die Sizes: NC; 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13,
9/16-12, 5/8-11, 1/4-10. NF; 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/1618, 5/8-18, 3/4-16, 4-40, 6-32, 8-32, 10-24,10-32, 12-24.
1/8-27NPT, 1/4-18NPT.
Metric Tap and Die Sizes: 3 x .60, 4 x .70, 4 x .75, 5 x .80, 5 x .90, 6 x 1.00, 7
x 1.00, 8 x 1.25, 9 x 1.00, 9 x 1.25, 10 x 1.25, 10 x 1.50, 11 x 1.50, 12 x 1.50,
12 x 1.75, 14 x 1.25, 14 x 2.00, 16 x 1.50, 16 x 2.00,
18 x 1.50,
18 x 2.50.
BSP Pipe Thread: 1/8 x 28, 1/4 x 19.
Accessories: 2-Die Stock, 2-Thread Gauge, T-handle Tap Wrench, 5-Screw
Extractor, 2-Tap, Reamer Wrench, Screwdriver, Blow-molded case.
PartNo
CRAFT 9-52386
Description
SET TAP-DIE CARB STL 107PC
Phone: 402-455-6151
Toll Free: 800-488-9699
428
Standard Tap and Die Sizes: NC; 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13.
NF; 1/4-28, 5/16-24, 3/8-24, 7/16-20. 4-40, 6-32, 8-32, 10-24,10-32, 12-24.
1/8-27NPT.
Metric Tap and Die Sizes: 3 x .50, 3 x .60, 4 x .70, 4 x .75, 5 x .80, 5 x .90, 6
x 1.00, 7 x 1.00, 8 x 1.25, 9 x 1.00, 9 x 1.25, 10 x 1.25, 10 x 1.50, 11 x 1.50,
12 x 1.50, 12 x 1.75.
BSP Pipe Thread: 1/8 x 28.
Accessories: Die Stock, Thread Gauge, T-handle Tap Wrench, Screw
Extractor, Tap, Reamer Wrench, Screwdriver, Blow-molded case.
PartNo
CRAFT 9-52382
CRAFT 9-52383
Description
SET TAP-DIE CARB STL 39PC MET
Visit Us At
www.johnday.com
Trade Tools
Plumbing Tools
Tap/Dies
High-Speed Standard or Metric Steel Tap and
Die Set 39 Pc.
9/16-12, 5/8-11, 1/4-10. NF; 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/1618, 5/8-18, 3/4-16, 6-32, 8-32, 10-24,10-32, 12-24.
1/8-27NPT, 1/4-18NPT.
x 1.00, 8 x 1.25, 9 x 1.00, 9 x 1.25, 10 x 1.25, 10 x 1.50, 11 x 1.50, 12 x 1.50,
12 x 1.75, 14 x 1.25, 14 x 2.00, 16 x 1.50, 16 x 2.00,
18 x 2.50,
18 x 2.50.
Accessories: 2-Die Stock, Thread Gauge, T-handle Tap Wrench, 5-Screw
PartNo
CRAFT 9-52306
CRAFT 9-52305
7 National Coarse dies: 1/4"-20, 3/8"-16, 1/2"-13, 5/8"-11, 5/16"-18, 7/16"14, 9/16"-12
7 National Fine dies: 1/4"-28, 3/8"-24, 1/2"-20, 5/8"-18, 5/16"-24, 7/16"-20,
9/16"-18
6 Metric dies: 6-1.00mm, 10-1.50mm, 12-1.50mm, 8-1.25mm, 12-1.25mm,
12-1.75mm
6 National Coarse taps: 1/4"-20, 3/8"-16, 1/2"-13, 5/16"-18, 7/16"-14, 9/16"12
6 National Fine taps: 1/4"-28, 3/8"-24, 1/2"-20, 5/16"-24, 7/16"-20, 9/16"-18
6 Metric taps: 6-1.00mm, 10-1.50mm, 12-1.50mm, 8-1.25mm, 12-1.25mm,
12-1.75mm
1 standard rethread file, 8 sizes: 11, 12, 13, 14, 16, 18, 20, 24 threads per inch;
1 metric rethread file, 8 sizes: 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50,
3.00mm per thread.
Blow Molded Case.
PartNo
CRAFT 9-52105
Description
SET TAP-DIE MSTR RETHRD 40P
Carbon Standard or Metric Steel Tap and Die
Set 58 Pc.
Description
SET TAP-DIE HI SPD 39PC MET
9/16-12, 5/8-11, 1/4-10. NF; 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/1618, 5/8-18, 3/4-16, 6-32, 8-32, 10-24,10-32, 12-24.
1/8-27NPT, 1/4-18NPT.
Trade Tools
All the
Automotive,
Plumbing and
Electrical Tools
You Need to Get
the Job Done.
Phone: 402-455-6151
Toll Free: 800-488-9699
x 1.00, 8 x 1.25, 9 x 1.00, 9 x 1.25, 10 x 1.25, 10 x 1.50, 11 x 1.50, 12 x 1.50,
12 x 1.75, 14 x 1.25, 14 x 2.00, 16 x 1.50, 16 x 2.00,
18 x 1.50,
18 x 2.50.
PartNo
CRAFT 9-52353
CRAFT 9-52373
429
Description
SET TAP-DIE CARB STL 58PC MET
Craftsman Tools
High-speed steel sets provide longer life than carbon steel. High speed steel
withstands heat much longer than carbon steel, so taps and dies stay sharp.
Rust-resistant satin finish for smooth cuts.
Master Rethreading Set 40 Pc.
Trade Tools
Craftsman Tools
Plumbing Tools
Tap/Dies
High-Speed Standard or Metric Steel Tap and
Die Set 58 Pc.
Heat-Treated Steel Reamer
For 1/8" to 1/2" holes. 5-3/4" long.
PartNo
CRAFT 9-5479
Description
REAMER STL 1/8-1/2HOL 5-3/4
Steel "T"-Handle Tap Wrench for #4 to #14
9/16-12, 5/8-11, 1/4-10. NF; 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16Machine Screw
18, 5/8-18, 3/4-16, 6-32, 8-32, 10-24,10-32, 12-24.
1/8-27NPT, 1/4-18NPT.
For #4 to #14 machine screw, 1/16" to 1/4", 3 to 6mm taps.
Description
x 1.00, 8 x 1.25, 9 x 1.00, 9 x 1.25, 10 x 1.25, 10 x 1.50, 11 x 1.50, 12 x 1.50, PartNo
WR TAP T-HDL 1/16 - 1/4
12 x 1.75, 14 x 1.25, 14 x 2.00, 16 x 1.50, 16 x 2.00,
18 x 1.50, CRAFT 9-4066
18 x 2.50.
Steel "T"-Handle Tap Wrench for 1/4" to 1/2",
PartNo
CRAFT 9-52311
CRAFT 9-52001
to 12mm Taps
Description
SET TAP-DIE HI SPD 58PC
Adjustable "T"-Handle Ratchet Tap Wrench 5/16-1/2", 6-12.5mm Capacity
5/16-1/2", 6-12.5mm capacity. Hardened self-centering jaws.
PartNo
CRAFT 9-4064
Description
WR TAP T-HDL ADJ 5/16 - 1/2
6
For 1/4" to 1/2", 6 to 12mm taps.
PartNo
CRAFT 9-4067
Description
WR TAP T-HDL 1/4 - 1/2
Tap and Drill Set
Adjustable "T"-Handle Ratchet Tap Wrench
0-1/4", 0-6.3mm Capacity
Includes 6 machine screw taps (4-40, 6-32, 8-32, 10-32, 10-24, 1/4"-20); drill
sizes 43, 36, 29, 25, 21, 7; tap wrench; case.
PartNo
CRAFT 9-52068
0-1/4", 0-6.3mm capacity. Hardened self-centering jaws.
PartNo
CRAFT 9-4065
800-488-9699
Description
WR TAP T-HDL ADJ 0 - 1/4
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET TAP-DRL 14PC
430
Trade Tools
Brake Adjusting Set 3 Pc.
Automotive
Brake Tools & Automotive Tools
Master Spindle Rethread Die Set 20 Pc.
PartNo
CRAFT 9-47381
Description
SET BRAK ADJ 3PC
Line Clamp and Plug Pliers 4 Pc. Combination
Set
Repair or renew damaged threads in stub axles/ spindles on most vehicles.
High tempered steel for strength. Includes application chart .
Standard: 11/16"-24, 3/4"-20, 27/32"-20, 1/4"-14, 3/4"-16 , 3/16"-20, 7/8"-14
Metric: M16x1, M19x1.5, M20x1.5, M24x1.5, M25x1.5, M16x1.5, M20x1,
M22x1, M24x2, M27x2,
Use with vacuum lines, fuel lines, brake lines heater systems, cooling
M18x1.5 , M20x1.25, M22x1.5. Blow molded case.
systems, water pumps. Smooth, rounded jaws seal flexible lines to allow
servicing without draining; pliers lock in place. Removes spark plug wires.
PartNo
Description
CRAFT 9-43370
SET DIE RETHRD 20PC
Made of non-conductive reinforced nylon. 2 each 6" (for 1/4-3/4" OD flexible
line) and 2 each 7" (for 3/8-1-1/4" OD flexible line).
Lug Wrench 22" 4-Way Auto Standard or
Metric
PartNo
CRAFT 9-47374
Description
SET PLR PLUG/CLMP LINE 4PC
Line Clamp and Plug Pliers 6 Pc. Combination
Set
Use with vacuum lines, fuel lines, brake lines heater systems, cooling
systems, water pumps. Smooth, rounded jaws seal flexible lines to allow
servicing without draining; pliers lock in place. Removes spark plug wires.
Made of non-conductive reinforced nylon. 2 each 6" (for 1/4-3/4" OD flexible
line), 2 each 7" (for 3/8-1-1/4" OD flexible line) and 2 each 10" (for 5/8" - 21/2" OD flexible line).
PartNo
CRAFT 9-47375
Description
SET PLR PLUG/CLMP LINE 6PC
PartNo
CRAFT 9-47692
Description
SEP BALL JNT
Ball Joint Separator
Bendix Drum Brake Spring Tool
Standard: Steel wrenches have welded center. Auto-5/6" diameter, light truck3/4" diameter. 3/4", 13/16", 7/8", 15/16" sockets.
Metric: Steel wrenches have welded center. Auto-5/6" diameter, light truck- Removes and installs return spring on bendix drum brakes.
3/4" diameter. 17, 19, 21, 22mm sockets.
PartNo
Description
PartNo
CRAFT 9-47401
CRAFT 9-47402
CRAFT 9-45493
Brake Adjusting Tool
Description
WR LUG 3/4X13/16X7/8X15/16
WR LUG 17X19X21X22 MET
Lug Wrench 25" 4-Way Light Truck
Adjusts clearance between brake drum and brake shoe. Offset heads fit most
drum brakes. 6-3/4".
7/8", 15/16", 1", 1-1/16" sockets.
PartNo
CRAFT 9-47403
PartNo
CRAFT 9-45496
Description
WR LUG 7/8X15/16X1X1-1/16
Phone: 402-455-6151
Toll Free: 800-488-9699
BRAK SPR TL BENDIX DRUM
431
Description
BRAK ADJ TL 6-3/4
Craftsman Tools
Includes brake adjusting tool, brake spring pliers and universal brake retaining
spring tool.
Trade Tools
Cylinder Surfacing Hone
Craftsman Tools
Automotive
Brake Cylinder Hone
Works with 1/4" or 3/8" electric drill (not incl.). Has a range of 2" to 7".
Includes three 220 grit stones.
PartNo
CRAFT 9-4633
For 27/32" to 2" (21.4 to 50.8mm) cylinders. 240 grit stones are 1-1/8" long.
PartNo
CRAFT 9-4656
Description
HONE CYLNDR 2-7
Disc Brake Pad Spreader
Description
HONE BRAKE CYL 27/32 - 2CAP
Brake Spring Pliers
Removes and installs shoe return springs on drum brakes. Socket end
removes. Hooked end installs. Pliers fasten spring to outside of brake shoe.
PartNo
CRAFT 9-45494
Description
PLR BRAK SPR
Brake Spring Washer Tool
Compresses piston for pad installation.
PartNo
CRAFT 9-47365
Exhaust/Strut Cut-Off Tool
Fits both large and small washers.
PartNo
CRAFT 9-47761
Description
BRAK PAD SEP DISC
Description
BRAK SPR WSH TL
Cylinder Hone Replacement Sets
For 9-4682 has 2 stones and 2 wipers.
PartNo
CRAFT 9-4687
CRAFT 9-4686
Description
HONE CYLNDR REPL STON 180GR
Cuts out-of-round pipes. 4 cutting wheels. 1/3 turn cuts all around pipe.
Cutting range 1-3/8" to 2-1/2".
Cylinder Hone Set
PartNo
CRAFT 9-47607
Flat Band Hose Clamp Pliers
Has two 5" 180, 80 grit stones and 2 wipers. 3 to
4-1/4" range. Universal joint action. Shank, extension fit 1/2" drill or drill
press (not incl.).
PartNo
CRAFT 9-4682
Description
SET HONE CYLNDR 3-4-1/2 5PC
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
CUT TL EXHST/STRUT 1-3/8- 2-1/2
432
Fits all styles of flat band hose clamps. Fine tooth locking ratchet. Locking
jaws hold clamp. Swivel jaws to grip at angle.
PartNo
CRAFT 9-47705
Description
PLR HOSE CLMP FLAT BAND
Trade Tools
Master Power Steering Pump/Alternator Pulley
Remover/Installer Kit
Automotive
Gear Pullers
PartNo
CRAFT 9-42178
Adjustable arms fit around most gears. Precision machined bolt for smooth
operation.
PartNo
CRAFT 9-46905
CRAFT 9-46903
CRAFT 9-46906
Description
PULL STEER PWR PMP/ALT KIT
Pickle Fork Set
Description
PULL GEAR 2 ARM 5 TON
Harmonic Balancer Steering Wheel Puller
Three forks and two handles. For separating ball joints, steering dampeners,
tie rods and pitman arms. Forks are threaded for interchanging handles. One
handle for hammering. One handle for use with air hammer (.401" shank).
PartNo
CRAFT 9-30308
Description
SET PICKLE FORK 5PC
Piston Ring Expander
Removes balancers, pulleys and gears with tapped holes. Floating swivel
helps prevent damage to shaft end. Four slots in yoke for two- or three-hole
applications. Bolt tool to balancer with center screw on end of crank shaft.
Includes 3/8"-24, 5/16"-18, 3/8"-16 and 10mm screws for most American and
imported cars.
PartNo
CRAFT 9-47626
Description
PULL STEER HORMONIC BAL
For 3/64-1/4" diameter rings.
PartNo
CRAFT 9-4662
Hose Pinch-Off Pliers
Piston Ring Groove Cutter and Cleaner
Eliminates need to drain system when servicing cooling system. Pliers
squeeze hoses shut. Jaws swivel for parallel clamping. Automatic locking
ratchet. Note: Do not use on wire reinforced hose.
PartNo
CRAFT 9-41839
Description
PLR HOSE PINCH AUTO LCK
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
EXPAND PISTON RING 3/64-1/4
Effectively removes carbon on pistons from 2" to 5" (51mm to 127mm).
Covers all major piston ring grooves, SAE and metric.
PartNo
CRAFT 9-47703
433
Description
CUT PISTON RNG GROOVE CLNR
Craftsman Tools
Removes and installs press-on-type belt driven accessory pulleys found on
GM Quad 4, GM 3.1L and Ford 4.6L vehicle engines. Includes everything
needed to remove and install pulleys on pumps with the common 3/8"-16
threaded belt. Molded Case.
Trade Tools
Seal Puller
Automotive
Pitman Arm Wedge
Craftsman Tools
PartNo
CRAFT 9-47691
For oil and grease seals.
Description
WEDGE PITMAN ARM
Rectangular Stainless Steel Bowl with Heavy
Duty Magnet
PartNo
CRAFT 9-41329
Description
BOWL W/ HD MAG RECT
Replacement Hone Set
For 9-4656.
PartNo
CRAFT 9-4657
PartNo
CRAFT 9-47645
Description
PULL SEAL OIL/GRSE
PartNo
CRAFT 9-47621
Description
CMPRSR VALVE SPR STEEL
Steel Valve Spring Compressor
Steering Wheel Lock Plate Remover and
Installer
Description
SET HONE BRAK CLNDR 27/32-2
Replacement Stone Set
For 9-4633. Set of 3.
PartNo
CRAFT 9-46331
Description
Ring Compressor
Depresses steering wheel lock plate allowing easy removal and reassembly of
snap ring. Includes SAE and metric screws.
PartNo
CRAFT 9-41834
Description
PULL STEER WHL LCK PLT 3PC
Steering Wheel Puller
Ratchet-type ring compressor for auto, light truck piston rings 2-1/8" to 5"
range. Holds up to 4 rings. Key wrench incl. 2 tension bands.
PartNo
CRAFT 9-4716
Description
RNG CMPRSR PSTN RAT 2-1/8-5
Round Stainless Steel Bowl with Heavy Duty
Magnet
Rubber cover on magnet. Holds small metallic parts, nuts, bolts even if bowl
is upside down. 6” round.
PartNo
CRAFT 9-41328
PartNo
CRAFT 9-41833
434
Description
PULL STEER WHL 8PC
Tailpipe Expander
Removes clamp grooves and rounds out pipes. Fits
1-5/8" to 2-7/16" pipes.
PartNo
CRAFT 9-47606
Description
BOWL W/ HD MAG RND
Phone: 402-455-6151
Toll Free: 800-488-9699
Pulls steering wheels on most U.S. and imported cars. Floating swivel on
center screw helps prevent damage to steering column. Five sets of side bolts:
3/8"-16, 5/16"-18, 5/16"-24, 1/4"-28, 8mm.
Description
EXP TAIL PIPE 1-5/8-2-7/16
Trade Tools
Thickness Gauge 36 Blade Standard/ Metric
Master
Automotive
Universal Nut Cracker
Splits nut from 5/16" to 7/8" across flats. Forged steel frame, hardened cutter.
4" x 1-3/8".
PartNo
CRAFT 9-4772
Description
NUT CRACKER
PartNo
CRAFT 9-40811
Description
SET GAUG THCK MSTR 36BLD
Thickness and Spark Plug Gauge Set 5 Pc.
Valve Spring Compressor - 16" x 13" Frame
Heavy-duty valve spring compressor with 16" x 13" frame. 10-1/2" opening.
6-1/4" steel jaws.
PartNo
CRAFT 9-47622
Description
CMPRSR VALVE SPR 10-1/2
Valve Spring Compressor - 9" x 11" Frame
Performs virtually all automotive, industrial and other gapping requirements.
Includes 2 spark plug wire gauges, offset gauge for valve tappets, ignition and
wire combination gauge, and a master feeler gauge set with 30 steel blades
and 6 brass blades. Sleeved vinyl pouch.
PartNo
CRAFT 9-40815
Description
SET GAUG THCK/SPK PLG 5PC
Battery Load Tester
For GMC, Continental engines. 9" x 11" steel frame. 9-1/2" opening. Nos. 1
and 2 spring steel jaws.
PartNo
CRAFT 9-47627
Description
CMPRSR VALVE SPR 9-1/2
Gauges/Testers
Feeler Gauge 12" Long
Has full 100 amp capacity, works on 6, 12V. batteries. 15-sec. load test. 016V. scale with color coded load test ranges. 14-gauge, 12" long test leads
with copper plated steel clamps. Instructions.
25 blade from .0015" - .040" (.038mm - 1.02mm).
PartNo
CRAFT 9-40805
Description
SET GAUG FEEL 25BLD 12LNG
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-21070
435
Description
BATT LOAD TESTER 100AMP CAP
Craftsman Tools
Includes 30 steel blades (sizes .002, .025, .003 through .026, .028, .030,
.032, and .035) and 6 brass blades (sizes .006, .008,
.010, .012, .014 and .016). All blades are 1/2"W x 3"L.
Trade Tools
Digital Tire Gauge
Automotive
Gauges/Testers
Craftsman Tools
Combination Ignition and Spark Plug Wire Set
Eight wire sizes:
.020, .025, .028, .030, .032,.034, .035 and .040. Fourteen 1/4"W x 1-3/4"L
ignition blades:
.012, .013, .014, .015, .016,.017, .018, .020, .022, .024,.025, .028, .030 and
.032.
PartNo
CRAFT 9-40801
Description
SET GAUG IGNIT/SPK PLG
Compression Test Kit
Digital gauge with an LED spotlight and swivel head that rotates 360° for
easy use and measurement. Illuminated LCD p.s.i. display and auto shut-off
function. Pouch, 2 batteries included.
PartNo
CRAFT 9-50023
Description
TIRE GAUGE DIGITAL 50023
Distributor Standard/Metric Wrenches
12 point opening box wrench offset design allows easy access to mounting
bolt. Alloy steel, heat treated and chrome plated.
PartNo
CRAFT 9-47674
CRAFT 9-47675
CRAFT 9-47676
CRAFT 9-47682
CRAFT 9-47683
Description
WR DIST 12PT 10MM
WR DIST 12PT 12MM
WR DIST 12PT 13MM
WR DIST 12PT 1/2
WR DIST 12PT 9/16
Hand-Held Vacuum Pump
Includes a full assortment of adapters for most automotive or small
applications. Shock-resistant gauge that reads 0-300 psi/0-20Kpa x
100.Rubber boot on gauge. Blow-molded case for storage.
PartNo
CRAFT 9-47089
Description
TEST COMPRESSION KIT
Cooling System Pressure Tester
For checking vacuum controlled components and checking leaks. Measures 030" of mercury vacuum. Kit contains hand pump, 2 ft. hose and 3 hose
adapters.
PartNo
CRAFT 9-21021
Description
VAC PUMP HD HLD
Inductive Timing Light
Universal cooling system pressure tester helps eliminates the need for almost
all system adapters. Complete with 4 double-ended caps allowing 8 different
caps to be tested.
PartNo
CRAFT 9-46342
Description
TEST PRESSURE COOLING
Phone: 402-455-6151
Toll Free: 800-488-9699
Measures timing at any engine speed to 8000 RPM. Timing light has durable,
high quality chrome housing, melt resistant neoprene lead set, and high
impact nose cone. Comes with easy-to-use instruction manual. Not digital.
PartNo
CRAFT 9-21027
436
Description
AUTO TIMING LGT INDUCTIVE
Trade Tools
Side Terminal Battery Wrench
Automotive
Gauges/Testers
Master Offset Gauge for Valve Tappets
For GM. 5/16" reversible ratcheting box end wrench.
PartNo
CRAFT 9-47757
Description
WR AUTO BATT 5/16 SD TERM
Includes 26 blades 1/2"W x 4"L. Sizes: .005 through
.030 inclusive.
PartNo
CRAFT 9-40802
Description
SET GAUG TAPPET 26BLD
For High Energy Ignitions. Includes sizes:
.040, .044, .045, .050, .060,.080.
Mechanics Stethoscope
PartNo
CRAFT 9-40818
Description
SET GAUG SPK PLG HI ENERGY
Six Wire Spark Plug Gauge for Standard
Ignitions
For engine performance diagnoses. Diaphragm greatly amplifies sound. 91/4" long probe.
PartNo
CRAFT 9-45164
Description
STETH MECH 9-1/4
Pocket Thickness Gauge
Includes sizes:
.025, .030, .034, .035, .040 and .045.
PartNo
CRAFT 9-40816
Fingertip control and large easy read dial. Measures different materials thru
consistent spindle pressure. Reads 0-100 by 0.001 of an inch 1/2" range.
Ground and lapped.
PartNo
CRAFT 9-4615
Description
GAUG THICKNESS POCKET
Phone: 402-455-6151
Toll Free: 800-488-9699
437
Description
SET GAUG SPK PLG STD IGNIT
Hand Tools That
Yield the Results
You Demand!
Craftsman Tools
Six Wire Hi-Energy Spark Plug Gauge
Trade Tools
Inspection Mirror 2-1/4" Diameter Round
Automotive
Gauges/Testers
Timing Analyzer
Adjustable to any angle. Telescoping handle: overall length 10"; extends to
14".
PartNo
CRAFT 9-4070
Description
MIRR INSP RND 2-1/4
Craftsman Tools
Specialty Tool Kit 5 Pc.
Measures timing at base timing and along the timing advance scale. Essential Includes: 1" x 2" inspection mirror. Telescoping magnetic pick-up tool.
timing analyzer for today's computer-controlled vehicles. Diagnoses both
Slotted screw starter. Philip/Torx screw starter. Double pointed scribe with
vacuum and centrifugal or electronic distributor advance systems. Timing
straight and 90° angle point. Packaged in zippered reusable plastic pouch.
light has durable, high quality chrome housing, melt resistant neoprene lead
PartNo
Description
CRAFT 9-4717
SET AUTO INSP 5PC
set and high impact nose cone. Comes with complete instruction manual.
PartNo
CRAFT 9-21023
Blunt Pick Hammer
Description
AUTO TIMING LGT PRO
Body Tools, Mirrors & Pick-up Tools
Inspection Mirror 1" x 2" Oval
5-3/8" head, 1-1/2" round face, 2-1/2" pick.
PartNo
CRAFT 9-4553
Description
HMR BODY BLNT PT 1-1/2 HICK
Bumping Hammer
Adjustable to any angle.
8-1/2" overall length.
PartNo
CRAFT 9-4097
Description
MIRR INSP OVAL 1X2
Inspection Mirror 1-1/4" Diameter Round
8-1/2" overall length. With magnetic pickup. Telescoping handle extends
from 5-3/4" to 19-7/8". Magnet for retrieving nuts, bolts and other ferrous
parts.
PartNo
CRAFT 9-4099
Description
MIRR INSP RND 1-1/4
Inspection Mirror 2-1/2" x 3-1/2" Rectangular
8-1/2" overall length. Telescoping handle: overall length 11-1/4"; extends to
15-1/4".
PartNo
CRAFT 9-4098
PartNo
CRAFT 9-4551
438
Description
HMR BODY SRNK BUMP HICK HDL
Clip Removing Tool
Unique saw design/two tools in one. Fast removal of door handle clips. Fast
removal of windshield molding clips.
PartNo
CRAFT 9-45405
Description
MIRR INSP RECT 2-1/2X3-1/2
Phone: 402-455-6151
Toll Free: 800-488-9699
5-1/8" head, 1-1/2" sq.;
1-5/8" round face.
Description
CLIP REMOVAL TOOL
Trade Tools
Drop-Forged Steel Dolly with 8 Molding,
Beading Surfaces
Automotive
Cross-Pein Hammer
PartNo
CRAFT 9-4552
Description
HMR BODY CRS PEIN 1-1/2 HCK
Drop-Forged Steel Dolly - Combo, Dolly/Spool
PartNo
CRAFT 9-45651
Description
DOLLY AUTO GENERAL PURP
Flexible Pick-Up Tool with Spring Jaws
Easy working plunger controls 4 tempered spring steel claws that grip tight
and sure. Tightly wound plated steel flexible cable. 23-1/2" long.
PartNo
CRAFT 9-41322
Description
PICKUP FLEX SPR JAW
Gasket Scraper
Combo, dolly/spool.
PartNo
CRAFT 9-45631
Scrapes surface clean for installing new gaskets. Forged steel. Overall length
10-1/2", 1" blade.
PartNo
CRAFT 9-43292
Light Bumping Hammer
Description
DOLLY AUTO SPOON COMB
Drop-Forged Steel Dolly - Heel
Heel.
PartNo
CRAFT 9-45621
Description
SCRPR GASK 1
Description
DOLLY AUTO HEEL
3-1/2" head, 7/8" sq.;
1-3/16" round face.
Drop-Forged Steel Dolly - Universal
PartNo
CRAFT 9-4550
Description
HMR BODY LGT BMP HICK HDL
Lighted Magnetic Pick-Up Tool
Universal.
PartNo
CRAFT 9-45611
Stainless steel shaft extends from 8-1/2" to 31-3/4". Recessed bulb is seated
below magnetic head. Turn head to turn light on/off. Head surrounded by
aluminum to shield from clinging to unwanted metal surfaces.
Description
DOLLY AUTO UNV
PartNo
CRAFT 9-46946
Description
PCKP TELESCP MAG LIT 31-3/4
Magnetic Pick-Up Tool
15 lb. capacity. Stainless steel shaft extends from
7-1/8" to 30-1/4". MegaMag™ head shields magnet from clinging to
unwanted metal surfaces.
PartNo
CRAFT 9-46947
Phone: 402-455-6151
Toll Free: 800-488-9699
439
Description
PICKUP TELESCP MAG 30-1/4
Craftsman Tools
Has 8 molding, beading surfaces. Bottom for panel, fender skirt.
5-3/8" head, 1-1/2" round face; 2-1/2" x 3/4" cross pein.
Trade Tools
Battery Chargers 15/2/100-Amp Fully
Automatic Battery Charger/Engine Starter for
6- and 12-Volt Batteries
Craftsman Tools
Automotive
Magnetic Pick-Up Tool with Powercap™
Stainless steel telescoping (6-3/4"-30-1/4") handle. Powercap™ focuses and
intensifies magnetic force-apply. Powercap™ shields magnet sides. 10 lb.
lifting capacity with Powercap™.
PartNo
CRAFT 9-41602
Description
PICKUP TELESCP MAG PWRCAP
Micro-processor controlled. Carrying handle. LED indicators. Color-coded,
impact resistant meter.
300-amp clamps. 15-amp fast charge, 2-amp trickle charge, 100-amp engine
start. Control switches 12v selector, 3-way amp selector and fully automatic,
manual and deep cycle charging modes selector.
Magnetic Telescoping Pick-Up Tool
Extends 16-3/4" to 26-3/4" long. Double ball and socket joint gives full 360°
flexibility.
PartNo
CRAFT 9-4132
Pick-Up Tool
Description
PICKUP TELESCP MAG 26-3/4
PartNo
CRAFT 28-71224
Description
BATTCHRG-ENG STAR 15/2/125A
Battery Chargers-50/15/2-Amp Manual Battery
Charger with 225/ 125 Amp Engine Starter
Extends from 4-1/2" to 19-1/4". Pocket clip.
PartNo
CRAFT 9-4133
Description
PICKUP TELESCP PCKT CLP 19-1/4
Pointed Pick Hammer
5-3/8" head, 1-1/2" round face, 2-1/2" pick.
PartNo
CRAFT 9-4556
Description
HMR BODY RND PCK 1-1/2 HICK
Battery Chargers-12/2-Amp Charger/75-Amp
Engine Starter
12-amp charge, charges most 12-volt batteries in 3 to 5 hours. 75-amp starter,
2 amp trickle charge. 12-gauge output cables stay flexible even in cold
weather.
PartNo
CRAFT 28-71223
Description
BATT CHRG-ENG STAR 60/10/2A
Phone: 402-455-6151
Toll Free: 800-488-9699
440
Includes multi-function battery tester. 50-amp fast charge, charges most
batteries in 1/2 to 1-1/2 hours. 15-amp rapid charge, charges in 1-1/2 to 4-1/2
hours. 225-amp 12-volt or 125-amp, 6-volt immediate engine start provides
12% more power than 200-amp starter. 2-1/4 hour timer.
6-gauge output cables stay flexible in cold weather. Automatic reset circuit
breaker for overload protection.
PartNo
CRAFT 28-71231
Description
800-488-9699 or visit
www.johnday.com
Trade Tools
Automotive
Battery Chargers-60/20/2-Amp Fully Automatic
Battery Charger with 275/ 125 Amp Engine
Starter
Creeper without Adjustable Headrest 40" Long
PartNo
CRAFT 9-51145
Description
CREEP TEARDRP 40
Creeper 40" Long Fully Adjustable,
Fully-Padded
Micro-processor controlled for precise operation. Can also be used manually.
Includes multi-function battery tester. 60-amp fast charge charges most
batteries in 1/2 to 1 hour. 20-amp rapid charge, charges in 1 to 3-1/2 hours.
275-amp, 12-volt or 125-amp, 6-volt immediate engine start provides 37%
more power than 200-amp starter. Angled control panel has easy-to-use touch
pad for accurate programming and easy-to-read alpha-numeric digital meter. Features ratcheting release mechanism. Adjusts to 12 positions from the
waist. “V”-drop™ style frame allows clearance for broad shoulders. Sturdy
Electronic timer. Spark-proof automatic mode for extra safety. Can also be
3/4" tubular steel frame supports up to 1,000 lbs. Fully padded with
used to charge gel-cel batteries.
leatherette for comfort, durability. Frame has long-lasting, rust-resistant
PartNo
Description
powder-coated finish. Six 2-1/2" rollers are oil-resistant. 17-1/4"W x 40"L.
CRAFT 28-71232
Creeper with Adjustable Headrest 40" Long
With new tear drop frame and 6-position adjustable headrest. Fully padded
frame is designed to comfortably cradle and support your body while
working. Durable v-style powder-coated metal frame tested at 1,000 lbs.
Corners have been removed for better shoulder comfort. Riv-Lock™ wheel
attachment system. Six 2-1/2" oil-resistant rollers will not strip or bend and
stays in locked position without tightening. 100% engaged ball bearings.
Measures 41-3/4"L x 18-1/4"W x 5"H.
PartNo
CRAFT 9-51146
441
Description
CREEP ADJ LNG 40
Adjustable-Height Mechanic’s Seat
Support lower back. Fully padded seat, wide bottom. 3" swivel rollers have
wide track wheels for added stability. Magnetic strip in storage tray. Rust
resistant powder coated finish on frame and tray. Tools not included. Features
hand lever for adjusting seat from 16-1/2"H to 21-1/2"H. Seat rotates a full
360°. Measures 16-1/2" to 21-1/2"H x 18-1/4"W x 16-1/2"D.
PartNo
CRAFT 9-51118
Description
CREEP TEARDRP ADJ HE 40
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-51001
Description
SEAT MECH ADJ PADDED
Craftsman Tools
With new tear drop frame. Same features as 9-51146 excluding adjustable
headrest.
Trade Tools
Pistol-Type Air Grease Gun
Automotive
Craftsman Tools
Creeper-Seat
For use with 3/4HP or larger compressors. Inlet air pressure range of 35-150
PSI. Loads with 14 oz. cartridge, from pressure filler or bulk load into 400cc
tube. Includes 24" hose with grease fitting.
Creeper and Roll Seat in one unit. Designed to operate as a full 47-1/2"L x
17"W creeper or depress quick release locking latch and it converts to a 24"L
x 17"W mechanic’s seat with tool tray. Four position head and back rest.
Constructed of 16 gauge tubular steel, powder coated frame. Heavy duty vinyl
covering with 3" full foam rubber head rest and 2" pad. Seven 2-1/2" full
swivel, hooded casters. Easily stored when not in use. Tools not included.
PartNo
CRAFT 9-51141
PartNo
CRAFT 9-16215
Description
GUN AIR GRSE PISTOL
Small Swivel Grip Filter Wrench
Description
CREEP/SEAT CONVERT 47-1/2
High-Rise Mechanic’s Seat
For use on filters 2-7/8" - 3-1/4" diameter.
PartNo
CRAFT 9-47609
Description
WR OIL FLTR 2-7/8 - 3-1/4 SWVL
Standard Swivel Grip Filter Wrench
Support lower back. Fully padded seat, wide bottom. 3" swivel rollers have
wide track wheels for added stability. Magnetic strip in storage tray. Rust
resistant powder coated finish on frame and tray. Non-adjustable seat.
Measures: 23-3/4"H x 18-1/4"W x 16"D.
PartNo
CRAFT 9-51108
Description
SEAT MECH 23-3/4 HIGH
Monster V-Drop™ Creeper
Description
CREEP MONST V DROP 40
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-47608
Description
WR OIL FLTR 3-1/2 - 3-7/8 SWVL
Universal Oil Filter Wrench
Designed to accommodate broad shoulders. Fully padded with durable
leatherette for working comfort. 1" tubular steel frame supports up to 2,000
lbs. Frame features rust-resistant powder-coated finish. Four 3-1/2" oil
resistant wheels.40-1/2"L x 20"W x 6"H.
PartNo
CRAFT 9-51142
For use on filters 3-1/2" - 3-7/8" diameter.
Self-adjusting. Fits filters 2-1/2" - 31-3/16". Works with 3/8" sq. drive ratchet.
PartNo
CRAFT 9-46955
442
Description
WR OIL FLTR SELF-ADJ
Trade Tools
Jack 2 Ton Capacity Aluminum
Automotive
Jack "One-Pump-to-Lift” 2-1/2 Ton
PartNo
CRAFT 9-50143
Description
JACK FLR ONE PUMP 2-1/2TON
Jack "One-Pump-to-Lift” 3-1/2 Ton Hydraulic
PartNo
CRAFT F9-50239
Description
ALMN JACK 4000
Jack 20 Ton Air (or Manual) Operated Hand
Uses standard shop air. “Quick Connector” provides easy removal of air hose.
Minimum height 9-1/2". Maximum height 18-5/8". 20 Ton capacity. Base
size: 8-7/8" x 6-3/4".
PartNo
CRAFT F9-50333
Description
JACK AIR HD 20TON
Jack 2-1/2 Ton Floor
For Autos. Lifting range of 5-3/4" to 20". One pump raises jacks from low
point to chassis. 27-1/2" x 13-7/16" x 6-1/2".
PartNo
CRAFT 9-50145
Description
JACK FLR ONE PUMP 3-1/2TON
Jack 12 Ton Air (or Manual) Operated Hand
Just one pump brings the saddle to the chassis, then it continues to lift. 107/8" no-load one pump lifting height. Universal joint release valve provides
positive locking in any handle position.
PartNo
CRAFT F9-50238
Description
JACK FLR 2-1/2TON
Jack 22 Ton Air/ Hydraulic Axle
Uses standard shop air. “Quick Connector” provides easy removal of air hose.
Uses standard shop air (90-175 PSI required). Top handle metered control
Minimum height 9-1/2". Maximum height 18-5/8". 12 Ton capacity. Base
release valve for easy height adjustment. Self returning spring. Fingertip
size: 8-1/8" x 5-7/8".
remote control. 9-1/2" x 19-1/2" lifting range. 4-1/2" extension screw.
PartNo
CRAFT F9-50332
Description
JACK AIR HD 12TON
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT F9-50338
443
Description
JACK AIR AXLE 22TON
Craftsman Tools
Designed exclusively for use with SUV's. Lifting range of 6" to 21". 28" x 913/16" x 6".
Speedy-Lift™ design: 2 strokes raises the saddle to lift point. Aluminum
lightweight construction means jack weighs less than 44 lbs. Lifts from 3-3/4"
to 18-1/2".
Trade Tools
Hydraulic Jacks
Automotive
Jack 30 Ton Air/ Hydraulic Axle
Craftsman Tools
Uses standard shop air (90-175 PSI required). Top handle metered control
release valve for easy height adjustment. Self returning spring. Fingertip
remote control. 11" x 18" lifting range. No extension screw.
PartNo
CRAFT F9-50339
Description
JACK AIR AXLE 30TON
Jack Stands 3-1/2 Ton Hydraulic Jack with
3-1/2 Ton
Full lifting power in upright or horizontal positions. Steel frame. Extension
screw (except on 20 thru 50 ton models) gives additional lifting height. 2 pc.
interlocking handle.
With this hydraulic jack, a single handle stroke raises saddle to vehicle
chassis. A safety bypass system prevents overloading a jack beyond its rated
capacity.
PartNo
CRAFT 9-50148
Description
JACK FLR ONE PUNP3-1/2TON
PartNo
Description
CRAFT 9-50280
JACK HD 2TON
CRAFT 9-50281
CRAFT 9-50282
CRAFT 9-50283
CRAFT 9-50284
CRAFT 9-50285
CRAFT 9-50322
CRAFT F9-50323
JACK HD 4TON
JACK HD 6TON
JACK HD 8TON
JACK HD 12TON
JACK HD 20TON
JACK HD 30TON
JACK HD 50TON
Total Lift
Range
7-1/8" 13-3/4"
8" - 15-3/8"
8-5/8"
8-7/8"
9-1/2"
9-1/2"
11" - 18"
9-1/2" 13-7/8
Jack Stands
Air Actuated Service Jacks
Welded steel construction. One-piece ductile ratchet bar. Counter-weighted
pawl. Manufactured to comply with ANSI/ASME Pald 4. Sold only in pairs.
Foot pedal operation provides quick, no load lifts to the load point. Fingertip
remote control. Heavy gauge steel frame. Wide base for stability and strength.
Reinforced stress points.
F9-50329 - 4 Ton capacity. Lift range: 5" - 24".
PartNo
CRAFT F9-50329
CRAFT F9-50330
CRAFT F9-50331
Description
JACK AIR FLR SRVC 4TON
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-50159
Description
JACK STND 3TON
CRAFT 9-50150
JACK STND 6TON
CRAFT 9-50340
JACK STND 3 TON
Min. Ht. Max. Ht. Base Size
11-1/2"
17"
6-3/4"x73/4"
15-3/8"
24-1/4"
9-4/4"x10
-3/8"
17-1/2"
27-1/4"
12"x10-3/
4"
800-488-9699
444
Trade Tools
Automotive
Long Chassis Model Floor Jacks with Internal
Load Limiting Device
PartNo
CRAFT F9-50235
Description
JACK FLR LNG CHASSIS 4TON
CRAFT F9-50236
CRAFT F9-50237
Min. Ht. Max. Ht. Jack Dim
5"
24"
50-5/8"x1
4-3/4"
7"
27"
57-3/4"x1
6-7/8"
7"
27"
54-3/4"x2
0"
Short Chassis Model Floor Jack with Internal
Load Limiting Device
Speedylift™ foot pedal for fast no-load lifts.
PartNo
CRAFT F9-50234
Description
JACK FLR 3TON HVY DTY
Welded square tubular steel construction. Head swivels 360° for ease of
engine assembly/disassembly. Extra long handle with rubber grip for ease of
rotation. Baked enamel finish. Meets ASME safety standard. “U” shape
construction. Head plate locks in any position. 3-1/2" diameter wheels.
PartNo
CRAFT F9-50342
10 Ton Hydraulic Body Repair
Specifically designed for pushing, spreading and pressing vehicle body
panels. Safety overload protection to prevent ram and cylinder damage. (F950347 has wheeled case.) WARNING: When extension tubes and/or offset
attachments are used, the rated capacity is reduced by 50% for each tube or
attachment connected. Includes: Hand pump assembly w/6' hose; Ram
assembly; Four extension tubes (27", 18", 10", 4-1/8"); male connector;
wedge head; serrated saddle; flat base; Ram toe; plunger toe; 2-3/4" rubber
head; 90° combination head; hydraulic spreader; blow molded case.
Min. Ht. Max. Ht. Jack Dim PartNo
5-1/4"
19"
27-3/8"x1 CRAFT F9-50347
3-1/2"
Shorty Hydraulic Hand Jack - 12 Ton Load
Capacity
Description
ENG STND 1250LB
Description
BODY REPAIR KIT HYDR 10TON
12 Ton Hydraulic Bench Press
Multi-position bed for work height adjustment. Automatic ram retraction
when jack valve is opened. Welded rigid steel channel frames. For
removal/installation of gears, u-joints, pulleys, wrist pins and for bending,
Serrated, heat-treated saddle. Cross type forged release valve. Built-in bypass bonding or straightening applications. 6" ram stroke. 12 Ton capacity.
Min./Max. working space: 3-1/4" device.
16-7/8".
PartNo
Description
CRAFT 9-50320
JACK HD 12TON SHORTY
Phone: 402-455-6151
Toll Free: 800-488-9699
Total Lift
Range
6" - 10-5/8
445
PartNo
CRAFT F9-50348
Description
PRESS BNCH 12TON
Craftsman Tools
Wide stance, low center of gravity. Foot pedal for quick no-load lifts. Handle
actuated release valve provides metered control.
Engine Crane-1,250 lbs. Capacity Engine
Stand
Trade Tools
Engine Crane 2-Ton Foldable
Craftsman Tools
Automotive
12 Ton Hydraulic Floor Press
bonding or straightening applications. 6" ram stroke. 12 Ton capacity.
Min./Max. working space: 3" - 34-3/4".
PartNo
CRAFT F9-50349
Description
PRESS FLR 12TON
Maximum 75-3/4" boom length. Welded tubular steel construction. Special 8Ton hydraulic long ram with built-in by-pass mechanism. Metered control
release valve for lowering boom at a precisely controlled rate of speed.
Adjustable front and rear legs. Meets ASME safety standard.
PartNo
CRAFT F9-50344
Description
CRANE ENG 2TON
4 Ton Hydraulic Body Repair Kit
Engine Crane-1-Ton Foldable
Maximum 43" boom length. Can be folded closed for compact storage.
Welded tubular steel construction. Special 8-Ton hydraulic long ram with
built-in by-pass mechanism. Meets ASME safety standard.
PartNo
CRAFT F9-50343
Specifically designed for pushing, spreading and pressing vehicle body
panels. Safety overload protection to prevent ram and cylinder damage. (F950347 has wheeled case.) WARNING: When extension tubes and/or offset
attachments are used, the rated capacity is reduced by 50% for each tube or
attachment connected. Includes: Hand pump assembly w/6' hose; Ram
assembly; Five extension tubes
(19-1/2", 16-1/2", 8-1/2", 6-1/8", 3"); Male connector; wedge head; serrated
saddle; flat base; Ram toe; plunger toe; 2-3/4" rubber head; 90° combination
head; hydraulic spreader; blow molded case.
PartNo
CRAFT F9-50364
Description
CRANE ENG 1TON FOLD
Description
BODY REPAIR KIT HYDR 4TON
Engine Crane-25 Ton Hydraulic Floor Press
bonding or straightening applications. 6" ram stroke. 25 Ton capacity.
Min./Max. working space: 2-1/2" 34-1/4".
PartNo
CRAFT F9-50350
Description
PRESS FLR 25TON
Phone: 402-455-6151
Toll Free: 800-488-9699
446
Call to Discuss Our
800-488-9699
Trade Tools
Automotive
Engine Crane-750 lbs. Capacity Engine Stand
Conventional Jacks
Welded square tubular steel construction. Head swivels 360° for ease of
engine assembly/disassembly. Extra long handle with rubber grip for ease of
rotation. Baked enamel finish. Meets ASME safety standard. “H” shape
construction. Head plate locks in 8 positions. 3" diameter wheels, 3-1/2"
casters.
PartNo
CRAFT F9-50341
ENG STND 750LB
PartNo
CRAFT F9-50334
CRAFT F9-50335
Manually Operated Turbo-Motor™
Telescoping Hydraulic Jack
Cap. Lbs.
1100
2000
Fits under cars raised by an in-ground or above-ground lift. 1,000 lb. capacity.
2 stage chrome-plated rams extend reach via foot pedal. Release pedal lowers
the load.
PartNo
CRAFT F9-50337
8 Ton Replacement Ram
Description
JACK TRANS LOW PROF 1100LB
JACK TRANS LOW PROF 1TON
Description
JACK 2 STAGE TELESC
Precision/Valve Tools
Micrometer 0 to 1 in. Carbide-Tipped
For F9-50343 and F9-50344 engine cranes.
PartNo
CRAFT F9-50345
Features 2 way thimble for use as a solid or friction drive. Lead error held to
0.00005 in. Reads to 0.0001 in. on vernier scale. 0 to 1 in. range. Durable
drop-forged steel frame.
Description
CRANE REPL RAM 8TON
Engine Crane-Air Operated Turbo-Motor™
Telescoping Hydraulic Jack
Fits under cars raised by an in-ground or above-ground lift. 1,000 lb. capacity.
Full hydraulic operation through both stages - no switching from air to
manual.
PartNo
CRAFT F9-50336
Description
JACK AIR TRANS HYDR 1000LB
Phone: 402-455-6151
Toll Free: 800-488-9699
447
PartNo
CRAFT 9-38631
Description
MICROMETER CARB 0-1IN
Visit Us At
www.johnday.com
Craftsman Tools
Remove/install auto and light truck transmissions and differentials. 360°
rotating handle base. Load restraining safety chain. Safety by-pass system
protects hydraulic unit from internal damage due to ram overtravel. 4 wheel
casters. Multi-adjustable cradle.
Trade Tools
Craftsman Tools
Automotive
Micrometer 0 to 1 in./0 to 25mm Electronic
Digital
Measures from 0 to 1 in. and 0 to 25 mm. Accurate to +/- 0.00005 in. and
0.001 mm. Thimble and barrel are marked for mechanical readings to 0.001
in. Convenient automatic shut-off.
PartNo
CRAFT 9-40170
Description
MICROMETER ELEC 0-1IN
Micrometer 0-1 in. Range Mechanical Digital
Micrometer Set 12 pc., Machinists, 0 to 6 in.
Range
Six individual micrometers cover a 6 in. range in 1 in. increments. Dropforged steel frame micrometers have 0.001 in. graduations on chrome finish
mic heads. Features lock ring and ratchet stop. Wood Storage Case
PartNo
CRAFT 9-38609
Description
SET MACH MICRO 12PC
Deluxe Machinists Tool Kit 13 pc.
Digital Micrometer simplifies the process by creating direct reading without
complicated conversions. Precise, reliable counter measures are direct to .001
Deal for professional machinists. Stainless steel 0 to 1 in. range friction head
in. Vernier scale is accurate to .0001 in.
micrometer with 0.0001 graduations and carbide faces. 6 in. full-flex rule
PartNo
Description
CRAFT 9-38667
MICROMETER MECH DIGIT 0-1IN
marked in 8ths, 16ths, 32nds and 64ths in. Wood Storage Case
PartNo
CRAFT 9-40320
Universal Dial Test Set 0-50-0
Digital Machinists Set 2 pc.
Has range of .200” x .001” graduations. Incl. clamp, tool post holder, 2
holding rods and case.
PartNo
CRAFT 9-38679
Description
SET UNIV DIAL TEST 0-50-0
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET MACH DLX 13PC
2-piece includes both Digital 4-way Caliper and Digital Micrometer with a
mahogany case. Features on-line direct conversion from standard to metric for
accurate measurements. Wood Storage Case
PartNo
CRAFT 9-40171
448
Description
SET MACHINEST DIGIT 2PC
Trade Tools
Caliper, Dial, 0-6 in. Range with Machinists
Tool Kit
Automotive
Base Depth Set 2-1/2”
PartNo
CRAFT 9-38632
Description
SET MACH BASE DEPTH
Timing Gauge Set 4 Pc.
Reads 0 to 100 by 0.001”. Stainless steel stem/spindle back. Brass casing.
Adjustable tolerance pointers. 1” travel indicator has 1” contact point
extension. 14 and 18mm spark plug hole adapters. Universal lug back.
Adjustable dial face, bezel lock. Meets AGD specifications.
PartNo
CRAFT 9-38672
Description
SET TIMING GAUG 4PC
Universal Dial Test Set 9 Pc. 0-10-0
This Caliper features online direct conversion from standard to metrics for
accurate measurements every time. Floating zero can be set at any position.
PartNo
CRAFT 9-40169
Description
CALIPER ELEC 4WAY DISPLAY
English/Metric Dial Caliper
Dual English 0.001”/metric 0.02mm on dial face. English graduations in
black, metric graduations in red. +/-.001” accuracy. 4-way (outside, inside,
depth, step) measurement. Hardened stainless steel. Precision ground and
lapped measuring faces. Satin chrome finish with dual graduations on beam.
Plastic Case
PartNo
CRAFT 9-38739
Description
CALIPER DIAL
Flexible Arm Indicator Holder
Holder with 150-lb. pull holds all types of indicators (incl. AGD). Maximum
reach is 15-1/4”. Base is 2” x 2-1/2” x 2-1/4” high.
Range of 0.020 x 00005” graduations. Set includes: 3 contact points, 2 stems
(1/4”, 3/8”), universal holder, clamp with dovetail slots, automatic reversal
contact point, case.
PartNo
CRAFT 9-40755
Description
SET UNIV DIAL TEST 0-10-0
Phone: 402-455-6151
Toll Free: 800-488-9699
449
PartNo
CRAFT 9-38912
Description
HLDR FLX ARM INDICATOR
800-488-9699
Craftsman Tools
3-piece Machinist's tool kit in wood case is reliable for precise measurements.
Hardened steel set includes 6 interchangeable depth rods to measure holes,
Includes 0 to 1 inch range friction head micrometer with .0001 inch
grooves and shoulders. Rods are inserted and held in place by knurled rod
graduations and carbide faces. Wood Storage Case
cap. Rod ends are hardened, ground and lapped. Chrome finish mic head has PartNo
Description
SET MACHINEST 3PC
black lines and numbers to .001” graduations. 2-/2” wide base is micro-lapped CRAFT 9-38776
and hardened to RC 62-64. Lock nut and ratchet stop. Meets or exceeds
Electronic Display 4-Way Caliper
Federal Specifications. #GGG-C-105b for accuracy. Fitted Wood Case
Trade Tools
Machinists’ Precision Ground-Thread
Micrometers
Craftsman Tools
Automotive
Indicator Holder
Holder with 150-lb. pull holds all indicators (incl. AGD). 2” x 2-1/2” x 2-1/4”
high base. 9” high overall.
PartNo
CRAFT 9-38911
Description
HLDR INDICATOR
Machinists’ Combination Square with Center
Head
Photo-engraved steel scale for accuracy Level vials. Chrome plated blade
with back graduations in 32nds and 64ths inch. Non-reversible bevel
protractor graduated 180°. Meets Federal Specifications GGG-S-656c. All
blades 12” except 9-3869 is 6”. Without protractor, with center head.
PartNo
CRAFT 9-38693
Description
MACH COMB SQ 12
Machinists’ Combination Square without
Center Head
Description
MACH COMB SQ 6
MACH COMB SQ 12
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-38601
CRAFT 9-38602
CRAFT 9-38603
Description
MICROMETER GRND THRD 0-1IN
Single Revolution Caliper
Single-revolution dial calipers have .100” direct reading per rev., .001”
graduations. Accurate to +/-.001” 4-way measurement capability. Covered
rack. Dual-gear movement floats over internal obstructions. Precision-ground,
lapped. Satin-chrome finish. Includes case.
PartNo
CRAFT 9-40188
CRAFT 9-40185
Description
CALIPER SNGL REV 0-8IN
CALIPER SNGL REV 0-6IN
Stainless Steel Vernier Caliper
Photo-engraved steel scale for accuracy Level vials. Chrome plated blade
with back graduations in 32nds and 64ths inch. Non-reversible bevel
protractor graduated 180°. Meets Federal Specifications GGG-S-656c. All
blades 12” except 9-3869 is 6”. Without protractor or center head.
PartNo
CRAFT 9-3869
CRAFT 9-38691
Features drop-forged steel frame, polished spindle, anvil. Spindle hardened to
Rc 62-64. Lead error held to .00005”. Marked to .001".
Inch/metric vernier caliper with 6”/150mm range. 0 to 6” by .001”/0 to
150mm by .05mm. Thumb lock.
PartNo
CRAFT 9-40181
450
Description
CALIPER VERNIER
Power/Air Tools
Chuck Cordless Hammerdrill 1/2"
Portable Electric Tools
Chuck Cordless Drill 1/2" - 12.0 Volts
PartNo
CRAFT 9-26926
PartNo
CRAFT 9-26928
Description
PWTL CRDLS DRL 1/2CHK 18V
Chuck Industrial Hammer Drill 1/2"
Description
PWTL CRDLS DRL 1/2CHK 14.4V
7.2 amps. VSR, dual range. 0-1,100/0-2,700 RPM. 0-19,000/0-46,000 BPM.
Includes 360° side handle, depth rod.
14.4 Volts. Keyless chuck. VSR. 0-400/0-1400 RPM. Adjustable torque.
Includes 2 batteries, charger, 2 bits, auxiliary handle, depth rod, case.
Accessories:
Battery Charger
9-11033 9-11040
PartNo
CRAFT 9-26927
PartNo
CRAFT 9-26726
Description
PWTL ELEC HMRDRL 1/2CHK
Chuck Industrial Rated Drill 1/2" - 7.8 Amps
Description
PWTL CRDLS DRL/DRV 1/2DR 14.4V
7.8 Amps. VSR. 360° side handle. 0-850 RPM.
PartNo
CRAFT 9-27158
Description
PWTL ELEC DRL 1/2D 7.8A REV
24.0 Volts. 1/2” Carbide chuck. 24 Position clutch. 2 speed, 0-400/0-1400
RPM. 0-6, 400, 0-22, 400 BPM. Includes 2 batteries, charger, 2 bits, auxiliary
handle, depth rod, case.
Accessories:
Battery Charger
9-11035 9-11040
PartNo
CRAFT 9-26929
Description
PWTL CRDLS HMR/DRL 1/2CHK 24V
Phone: 402-455-6151
Toll Free: 800-488-9699
451
7.0 Amps. VSR. Single speed, reversible. Triple reduction gearing. 450 RPM.
PartNo
CRAFT 9-27110
Description
PWTL ELEC DRL 1/2D 7.0A REV
Craftsman Tools
12.0 Volts. Keyless chuck. 0-350/0-1100 RPM. VSR. Adjustable torque.
Includes 2 batteries, charger, 2 S.D. bits, and case.
Accessories:
Battery Charger
9-11031 9-11040
18.0 Volts. Carbide keyless chuck. 0-400/0-1400 RPM. 0-6, 400, 0-22, 400
BPM. Mode selection dial. Adjustable torque. Includes battery, depth
adjustment rod.
Accessories:
Battery
Charger
9-11034
9-11040
Power/Air Tools
Craftsman Tools
Cordless Impact Wrench 1/2" Drive
18.0 Volts. 180 ft./lbs. of ultimate torque. 2200 impacts per minute, 0-2200
RPM free speed. Soft grip handle helps dampen vibration.
Accessories:
Battery Charger
9-11034 9-11040
PartNo
CRAFT 9-26825
18.0 Volts. Keyless chuck. VSR. 0-400/0-1400 RPM. Includes 2 batteries,
charger, 2 S.D. bits, wrist strap, case.
Accessories:
Battery
Charger
9-11034 9-11040
PartNo
CRAFT 9-27124
Description
PWTL CRDLS HMRDRL 1/2CH 18V
Chuck Cordless Drill 3/8" - 300/600 RPM
Description
PWTL CRDLS WR IMP 1/2CHK 18V
Impact Wrench 1/2" Square Drive
7.5 amps. Hog ring, rocker switch. 240 ft./lbs. of torque. 2,100 RPM, 2,700
IPM. 240 ft./lbs. maximum torque.
PartNo
CRAFT 9-27997
Description
PWTL ELEC WR IMP 1/2DR 7.5A
Impact Driver 14.4 Volt Cordless EX™
Variable speed impact driver with 2 battery packs and blow molded case.
Braking switch, 1 hour universal charger, mid-handle design with firm grip
feature for balance and comfort.
Accessories:
Battery Charger
9-11044 9-11041
PartNo
CRAFT 9-11403
PartNo
CRAFT 9-11451
452
Description
PWTL CRDLS DRL 3/8DR 9.6V 2SP
9.6 Volts. Dual range. VSR. 0-350/0-1100 RPM. Includes 2 batteries, charger,
and 2 S.D. bits.
Accessories:
Battery Charger
9-11019 9-11040
PartNo
CRAFT 9-26922
Description
PWTL CRDLS IMPDRV EX 1/4CHK
Phone: 402-455-6151
Toll Free: 800-488-9699
9.6 Volts. Keyless chuck. VSR, 2 speed. 300/600 RPM. Includes battery, 7
bits, and case.
Accessories:
Battery Charger
9-11054 9-11053
Description
PWTL CRDLS DRL 3/8CHK 9.6V
Power/Air Tools
Chuck Cordless EX™ Right Angle Drill/Driver
3/8"
Chuck Cordless Drill/Driver 3/8"
15.6 Volts. Plenty of power for most drilling/driving needs. Variable speeds. 0600 RPM no load speed. Reversible.
Accessories:
Battery Charger
9-11004 9-11005
PartNo
CRAFT 9-11425
PartNo
CRAFT 9-10153
Description
PWTL CRDLES DRL 3/8CHK 14.4V
Chuck EX™ Cordless Drill 3/8" - 7.2 Volts
Description
PWTL CRDLS DRL/DRV 3/8CHK 15.6
Chuck Cordless EX™ Drill 3/8" - 12.0 Volts
7.2 Volts. Provides long-lasting power for most home drilling needs. 550
RMP (no load). Reversible, so it removes screws. Planetary spur gearing for
added torque/smooth operation.
Accessories:
12.0 Volts. T-handle drill with 3/8” chuck, 24-position clutch, forward/reverse Battery Charger
9-11051 9-11050
switch with overmold, 2 speed gear box and bubble level. Includes 20
accessory bits.
PartNo
Description
Accessories:
CRAFT 9-11455
PWTL CRDLS DRL EX 3/8CHK 7.2V
Battery Charger
9-11057 9-11055
PartNo
CRAFT 9-11443
Description
PWTL CRDLS DRL EX 3/8CHK 12V
Chuck Cordless EX™ Drill/Driver 3/8"
14.4 Volts. 2 speed, reversible, 0-400 and 0-1400 RPM. Keyless chuck. 24
position clutch, T-handle grip design for added comfort and control. Includes
2 bits, 2 battery packs, 1 hour charger and case.
Accessories:
3.2 Amps. 0-1,500 RPM. 10-1/4” long, includes case.
Battery Charger
9-11044 9-11041
PartNo
CRAFT 9-11453
PartNo
CRAFT 9-27996
Description
PWTL CRDLS DRL EX 3/8CHK 14.4V
Phone: 402-455-6151
Toll Free: 800-488-9699
453
Description
PWTL ELEC DRL 3/8D 3.2A MNI
Craftsman Tools
14.4 Volt. 2 sleeve metal rear chuck, 700s motor, 1 speed gear box. Forward/
reverse/VSRB switch, 1500mAh cell, 2 ppks, 1 hour universal charger. 2 bits,
lanyard.
Accessories:
Battery Charger
9-11044 9-11041
Power/Air Tools
Cordless EX™ Drill Set 6 Pc. - 19.2 Volt
Craftsman Tools
5.5 Amps. VSR. 2 speed gear box, 24 position clutch, auxiliary handle. 02,500 RPM.
PartNo
CRAFT 9-27994
Description
PWTL ELEC DRL 3/8DR 5.5AMP
Description
PWTL ELEC DRL 3/8DR 6AMP
Description
SET PWTL CRDLS 19.2V EX 6PC
Cordless Circular Saw 61/2"
Includes 1/2” drill/driver, trim saw, fluorescent light, and reciprocating saw. 2
battery packs, 5-1/2” carbide D.E. bits, edge guide, manuals and storage case.
Accessories:
Battery
Charger
9-11375 9-11041
18.0 Volts. 2,400 RPM. Includes 2 Batteries, charger, blade, hex wrench,
case.
Accessories:
Battery Charger
9-11034 9-11040
PartNo
CRAFT 9-27119
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
Cordless EX™ Drill Set with Reciprocating
Saw 6 Pc. - 19.2 Volt
PartNo
CRAFT 9-11438
Cordless EX™ Drill Set 4 Pc. - 19.2 Volt
PartNo
CRAFT 9-11432
PartNo
CRAFT 9-11436
Includes 1/2” drill/driver, trim saw, and fluorescent light. Reciprocating saw,
nailer, and stud sensor.
Accessories:
Battery Charger
9-11375 9-11041
6.0 Amps. VSR. Keyless chuck. 0-2,500 RPM. Includes case.
PartNo
CRAFT 9-26939
Includes trim saw, 1/2” drill driver and fluorescent light plus 2 batteries.
5-1/2” carbide blade, 2 D.E. bits and convenient storage case.
Accessories:
Battery Charger
9-11375 9-11041
454
Description
PWTL CRDLS SAW CIR 18V6-1/2
Power/Air Tools
Cordless Tool Batteries and Chargers
Cordless EX™ Reciprocating Saw
Craftsman Tools
Battery & Charger Tool Guide
19.2 Volts. Powerful motor for heavy work. Variable speed (0-3100 spm) for
fast cutting in a variety of materials. Trigger switch with lock off. Includes
battery, 2 blades, and charger.
Accessories:
Battery Charger
9-11375 9-11041
PartNo
CRAFT 9-11427
Description
PWTL CRDLS SAW RECIP EX 19.2V
Cordless Industrial Reciprocating Saw
18.0 Volts. 0-2500 SPM. Includes 2 batteries, charger, blade, case.
Accessories:
Battery Charger
9-11034 9-11040
PartNo
CRAFT 9-27129
Description
PWTL CRDLS SAW RCP 18V1STRK
Cordless Screwdriver
3.6 volts and accepts 1/4” Hex collect, any standard nut/screw driver bits
Planetary spur gears provide power and torque and integrated worklight
equipped with remote cutoff switch.
PartNo
CRAFT 9-11139
Description
PWTL CRDLS SCRDR
Phone: 402-455-6151
Toll Free: 800-488-9699
455
Cordless Tool
9-11401
9-11403
9-11407
9-11425
9-11426
9-11427
9-11443
9-11448
9-11450
9-11451
9-11452
9-11423
9-11454
9-26825
9-26922
9-26926
9-26927
9-26828
9-26929
9-27119
9-27124
9-27129
PartNo
Battery
CRAFT 9-11375
CRAFT 9-11044
CRAFT 9-11004
CRAFT 9-11057
CRAFT 9-11051
CRAFT 9-11054
CRAFT 9-11045
CRAFT 9-11034
CRAFT 9-11019
CRAFT 9-11031
CRAFT 9-11033
CRAFT 9-11035
Battery Charger
CRAFT 9-11041
CRAFT 9-11005
CRAFT 9-11055
CRAFT 9-11050
CRAFT 9-11053
CRAFT 9-11040
Battery
9-11375
9-11044
9-11375
9-11004
9-11375
9-11375
9-11057
9-11375
9-11051
9-11054
9-11057
9-11044
9-11045
9-11034
9-11019
9-11031
9-11033
9-11034
9-11035
9-11034
9-11034
9-11034
Description
BATT PWTL CRDLS 19.2V
BATT PWTL CRDLS TL 15.6V
BATT PWTL CRDLS 12V
BATT PWTL CRDLS 9/6V
BATT CHRGR PWTL CRDLS18V
BATT PWTL CRDLS 18V
BATT CHRG PWTL CRDLS
BATT CHRG PWTL CRDLS
BATT CHRGR ADAPTR 7.2V
BATT CHRGR PWTL CRDL 9.6V
BATTCHRG PWTL CRDLS 9.6-24V
Charger
9-11041
9-11041
9-11041
9-11005
9-11041
9-11041
9-11055
9-11041
9-11050
9-11053
9-11055
9-11041
9-11041
9-11040
9-11040
9-11040
9-11040
9-11040
9-11040
9-11040
9-11040
9-11040
Power/Air Tools
Orbital Sander 3.0 Amp - 13,000 OPM
Craftsman Tools
Drywall Screw Gun
Random orbit. Dust collector. 13,000 OPM. 5” diameter with vac holes.
PartNo
CRAFT 9-11636
Orbital Sander 3.0 Amp - 7,000/12,000 OPM
6.2 Amp, VSR. 0-2500 RPM. Depth control adj.
PartNo
CRAFT 9-27132
Description
PWTL ELEC SAND RO 3AMP
Description
PWTL ELEC DRYWALL SCRW 6.2A
Sanders
Orbital Sander 2.0 Amp
Random orbit. Dust collector. VS. 7,000/12,000 OPM. 5” diameter with vac
holes.
PartNo
CRAFT 9-27957
Dust collector. 14,000 OPM. Uses 1/4 sheet. Includes sandpaper hole punch.
PartNo
CRAFT 9-27979
Description
PWTL ELEC SAND RO 3AMP 5IN
Sander - 4-in-1 Multi-Sander with
Interchangeable Pads
Description
PWTL ELEC SAND RO 2AMP 5IN
Orbital Sander 2.6 Amp
Random orbit base. Finishing base provides fine finish sanding of wood or
metal. Attach detail sander pad and get into tight areas usually reserved for
“finger” sanding. 1.4 amp, 1/5 HP motor delivers 10,5000 orbits per minute.
Built-in sawdust collection includes bag and vac adapter. Hook/loop base.
Auxiliary handle rotates around housing and locks in front or either side.
Includes two 5" sheets of sandpaper and wrench. 6' cord. Imported.
Random orbit. 12,000 OPM. 5” diameter with vac holes.
PartNo
CRAFT 9-27987
Description
PWTL ELEC SAND RO 2.6A 5IN
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-11682
456
Description
PWTL ELEC SAND 4IN1 1.4 AMP
Power/Air Tools
Professional 2.5 Amp Rotary Grinder
Belt Sander 6.0 Amp
PartNo
CRAFT 9-26756
Professional Heat Gun
Variable speed. 3” x 21” belt. 775-1,150 SPFM.
PartNo
CRAFT 9-11727
Description
PWTL ELEC GRND ROT 2.5A PRO
Description
PWTL ELEC BLT SAND 8A 3X21
Belt Sander 7.0 Amp
Temperature range 120° to 1050°F. LED Temperature Display. 4 Position
Switch. Variable Heat Dial. Includes nozzle.
PartNo
CRAFT 9-27801
3” x 21” belt. 1,300 SPFM.
PartNo
CRAFT 9-11726
Description
PWTL ELEC BLT SAND 7.5A3X21
Description
PWTL ELEC HEATGUN 120-1050D
Saws
Circular Saw with LaserTrac™ and Case 14.0
Amp
Electric Security Engraver Kit
Carbide tip adjusts for glass, wood, copper, brass or plastic. Plastic template
for letters. Instructions included.
PartNo
CRAFT 9-61050
For the straightest cuts possible, the laser beam forms a straight line on the
wood. Motor operates at 5,000 RPM. Carbide-tipped blade for 2-3/8" depth of
cut at 90°, 1-13/16" at 45°.
Description
PWTL ELEC ENGRVR KIT
***CAUTION***
LASER RADIATION.
DO NOT STARE INTO BEAM.
Visit Us At
www.johnday.com
PartNo
CRAFT 9-10860
Phone: 402-455-6151
Toll Free: 800-488-9699
457
Description
PWTL ELEC SAW CIR 14AMP
Craftsman Tools
1/4 hp rotary grinder with 2.5 amps of power for your heaviest needs. 26,500
RPM for fast material removal and a smooth finish. Accepts 1/4 and 1/8”
shanks (with adapter, included).
Power/Air Tools
Industrial Biscuit Plate Jointer 6.5 Amp
Craftsman Tools
Angle Grinder Kit 4-1/4"
6.5 amp, 10,000 RPM jointer features rack and pinion fence that adjusts from
0 to 90 degrees. Retractable anti-slip pins help keep material in place while
slot is cut.
7 amp, 11,00 RPM AC/DC motor, dc capability, heavy duty slide lock on
switch, ergonomically designed in line grip handle, compact design, 2
position auxiliary handle mounts on either side. Locking spindle provides
quick and easy wheel changes.
PartNo
CRAFT 9-27703
PartNo
CRAFT 9-27730
Description
PWTL ELEC BSCT PLT JNR 6.5A
Circular Saw, Twin Blade Cutter 6-1/8"
Description
PWTL ELEC GRNDR 4.5 7AMP
Orbital Jigsaw, Scrolling Action 5 Amp
Multi-position, metal front end, switchable tool-less blade change, accepts
both U & T shank blades. Soft grip, light, orbital action. Scrolling on tool
blade storage, dust blower switch, vacuum port, variable speed.
PartNo
CRAFT 9-17242
Description
PWTL ELEC SAW JIG 5.0AMP
7.8 amp, 1.25 hph (max dev.) motor provides the torque, power and durability
for a variety of cutting jobs. The twin-blade system is great for wood, plastic,
copper, aluminum, stainless steel and more.
Saber Saw 5.0 Amp
Accessories:
Blade
Wax Sticks
9-26677
9-26678
PartNo
CRAFT 9-26829
5.0 Amps. 500-3,000 SPM. Infinite speed lock. Dust blower. Includes blade
and chip shield.
PartNo
CRAFT 9-27719
Description
PWTL ELEC SAW SABRE 5.0AMP
Description
PWTL ELEC SAW CIR TWIN
Circular Saw ’7-1/4" 13.0 Amp
Industrial Trim Saw 5-1/2"
6.5 amp, 4,000 RPM. Left side blade. Cuts 2" x 4" @ 90°. Includes blade and
blade wrench.
PartNo
CRAFT 9-2754
PartNo
CRAFT 9-10845
Description
PWTL ELEC SAW IND TRIM 5-1/2
Phone: 402-455-6151
Toll Free: 800-488-9699
13 amp saw with a powerful motor and aluminum blade guard. Includes an 18
tooth carbide-tipped blade for fast, efficient cutting and long life. Includes: (1)
24T carbide blade, (1) 40T high speed steel blade, and case.
458
Description
PWTL ELEC SAW CIR 13A 7-1/4
Power/Air Tools
Reciprocating Saw Kit 8.5 Amp
Circular Saw 7-1/4" 15.0 Amp - 5,500 RPM
PartNo
CRAFT 9-26770
Description
PWTL ELEC SAW RECIP 8.5AMP PRO
Industrial Router
15.0 Amps. Spindle lock. 5,500 RPM. Includes blade, wrench and case.
PartNo
CRAFT 9-27108
Description
Circular Saw 7-1/4" 15.0 Amp - 5,800 RPM
9.0 Amp. 0-1-1/2" Depth. 25,000 RPM. 1/4" - 1/2" Collet. Comes with collet
wrench and chipshield.
PartNo
CRAFT 9-26921
Description
PWTL ELEC ROUT 9AMP 1/4-1
Laminate Trimmer
15.0 Amps. Spindle lock. 5,800 RPM. Includes blade, wrench and case.
PartNo
CRAFT 9-27111
Description
Worm Drive Circular Saw 7-1/4"
3.8 Amp. 23,000 RPM. Cuts to 1-1/4" deep. Comes with: collet wrenches,
laminate bit, case.
PartNo
CRAFT 9-27512
Plunge Router
13.0 amps, 4,400 rpm. Includes blade and wrench.
PartNo
CRAFT 9-2761
Description
PWTL ELEC LAMINATE 3.8AMP
Description
PWTL ELEC SAW CIR WRM 7-1/4
Reciprocating Saw 8.0 Amp
Powerful motor and tooless blade clamp with easy lever action for fast
changes. Variable speed 0-2400 SPM (no load) with a 6-position speed dial to 15.0 Amps. 10,000-22,000 RPM. 1/4" - 1/2" Collet. Includes Chip shield,
edge and contour guides, collet wrench, guide bushing.
adjust cutting speed for more controlled cutting.
PartNo
CRAFT 9-17173
PartNo
CRAFT 9-26835
Description
PWTL ELEC SAW RECIP 8.0AMP
Phone: 402-455-6151
Toll Free: 800-488-9699
459
Description
PWTL ELEC ROUT 15A 1/4-1/2
Craftsman Tools
Variable speed 0-2600 SPM, trigger actuated. Keyless blade clamp.
Adjustable front shoe, lever actuated. Heavy-duty 2-finger switch. Rubber
front grip, rear handle overmold.
Power/Air Tools
Compound Miter Saw 10"
Craftsman Tools
Replacement Blade for 6-1/8" Twin Cutter
Saw
2 carbide-tipped blades with Teflon coating for fast, smooth, clean cuts in
wood, wood-based materials, plastic, roofing materials*, steel, aluminum**,
copper**, and stainless steel.
* When cutting roofing materials, blades must be kept clean with cleaning
3-position handle. Built-in carrying handle. Quick locking miter table.
solvent.
Includes extension wings, clamp. Bevel lock handle. Power lever handle
** When cutting aluminum and copper, lubricating system on the saw should
supports hand for more comfortable cutting. Zero clearance throat plate
be used.
increases accuracy and quality of cut. Unique control knobs and scale
PartNo
Description
graphics for quick, easy set-ups. Electric brake stops blade rotation in
CRAFT 9-26677
BLD CIR SAW TWIN
seconds. 24T carbide blade included.
Stationary and Bench Power Tools
Miter Saws/Table Saws
Table Saw 10" 3 HP
Stops: 0°, 15°, 22-1/2°, 31.6°, 45°, left & right
Amps: 15, RPM: 4800, Arbor: 5/8"
Cutting Capacity: 90° Crosscut = 2-5/8" x 5-1/2"
45° Miter = 2-5/8" x 3-1/2"
45° Bevel = 1-1/2" x 5-1/2"
PartNo
CRAFT 9-21200
Description
SAW MTR CMPND 15AMP 10
Compound Miter Saw 10" Laser Trac™
Develops maximum 6 HP. Solid cast-iron table. 36" x 27" work surface. Rip
fence positions right or left; 50" width of cut to right of blade. 10-1/4" to left.
Depth of cut is 3" at 90°,
2-1/8" at 45°. 5/8" blade arbor insert, miter gauge. T-slot miter gauge guides
on either side of blade. Includes 5/8" dado arbor and insert, magnetic
contactor with overload relay and emergency on/off switch. 240 volt, single
phase, 3,450 rpm motor. 4" exhaust port. 43"D x 77"W x 38"H.
Laser is dotted line for alignment, becomes solid line as cut starts. “D” handle.
Bevel lock handle. Power lever handle supports hand for comfortable cutting.
Zero clearance throat plate helps increase accuracy and quality of cut. Unique
PartNo
Description
control knobs and scale graphics for quick, easy set-ups. Electric brake stops
CRAFT F9-22694
SAW TBL 3HP 10 PRO
blade rotation in seconds. 40T carbide blade included.
*** CAUTION ***
LASER RADIATION.
Trade Tools
Stops: 0°, 15°, 30°, 31.6°, 45°, left & right
Amps: 15, RPM: 5000, Arbor: 5/8"
Cutting Capacity: 90° Crosscut = 5-7/16" x 2-9/16"
45° Miter = 3-7/16" x 2-9/16"
45° Bevel = 5-7/16" x 1-9/16"
All the
Automotive,
Plumbing and
Electrical Tools
You Need to Get
the Job Done.
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-21253
Description
SAW MTR CMPND 15AMP 10LZR
800-488-9699
460
Power/Air Tools
Table Saw 12" Industrial-Rated
Table Saw 10" - Rips 24" Left & 24" Right
Table Saw 10" - Rips 24" Left & 30" Right
PartNo
CRAFT F9-22692
Description
SAW TBL 6HP 12 PRO
Miter Saw 12" Laser Trac™
1.5HP, 120V, 13 amp capacitor start/run induction motor with slip-resistant, vnotch belt drive system. 3,450 RPM. Cast iron body with stamped steel stand
and stringer supports. Cast iron and MDF board extensions. Rips 24" left and
30" right of blade. The Align-A-Rip XRC™ extruded aluminum rail system
has self-aligning quick-release rip fence with rack and pinion microDie cast aluminum base. Power lever handle supports hand for comfortable
adjustments. 2-1/2" dust collection port with dust bag. Includes positive
cutting. Zero clearance throat plate helps increase accuracy and quality of cut.
traction T-slot miter gauge, 10", 40 Tooth carbide-tipped blade, fence support Unique control knobs and scale graphics for quick, easy set-ups. Electric
storage hooks.
brake stops blade rotation in seconds. 30T carbide blade included.
PartNo
CRAFT 9-22859
Description
SAW TBL 1.5HP 10 PRO
Stops: 0°, 15°, 22-1/2°, 30°, 45°, left & right
Amps: 15, RPM: 4000, Arbor: 1"
Cutting Capacity: 90° Crosscut = 5-7/8"x 3-7/8"
45° Miter = 4-1/8"x3-7/8"
45° Bevel = 5-7/8"x2-3/4"
***CAUTION***
LASER RADIATION.
PartNo
CRAFT 9-21223
Phone: 402-455-6151
Toll Free: 800-488-9699
461
Description
SAW MTR CMPND 15AMP LSER 12
Craftsman Tools
3-HP motor develops 6-HP max. Extra-wide 48" x 30" work surface. Solid
surface cast iron table has two parallel miter gauge “T” slots for “T” blocks.
Easy-glide 39-1/2" rip fence with front, rear guide support rails permits 50"
cut to right of blade; works on both sides. Quick-release front tension grips.
Front guide rail scale with magnified window, calibrated in inches and
millimeters, is indexed to show distance between blade and rip fence. 1" arbor
1.5 HP, 13 amp capacitor start/run induction motor with slip resistant, v-notch
is changeable to 5/8" for dadoing; blade tilts to 45° maximum cut. Accessory
belt drive system. 3,450 RPM. Cast iron body with stamped steel stand. Rips
kit: two 1" blocks, screws; 3-, 5-, 8mm hex wrenches; 3 double-ended spanner
24" left and 24" right of blade. The Align-A-Rip™ precision milled aluminum
wrenches: 11-13mm, 12-14mm, 17-19mm; 2-pin spanner wrench for easy
rail works with a self-aligning quick-release rip fence.
arbor installation. Rip fence, dado plate, arbors, miter gauge, motor, pulley,
PartNo
Description
belts. Magnetic contactor. 240-volt, single-phase, 3450 RPM, 3-HP motor.
CRAFT 9-22849
SAW TBL 1.5HP 10
Steel cabinet, 4" sawdust exhaust port. Lock-out switch helps prevent
unauthorized use. 46"D x 77"W x 42"H.
Power/Air Tools
Multi-Action Work Support
Craftsman Tools
Slide Compound Miter Saw 12"
Single roller stand, support stand and multi-directional all in one. Supports up
to 200 lbs. and extends up to 43.5”. Features gauge steel frame. Ball bearings
in all rollers.
20-1/2" diameter work table. Two dust collection ports. Bevel lock handle.
Power lever handle supports hand for more comfortable cutting. Zero
clearance throat plate increases accuracy and quality of cut. Unique control
knobs and scale graphics for quick, easy set-ups. Electric brake stops blade
rotation in seconds. 40T carbide blade included.
Stops: 0°, 15°, 22-1/2°, 45°, left & right
Amps: 15, RPM: 4300, Arbor: 5/8"
Cutting Capacity:
90° Crosscut = 4"x12-5/8"
45° Miter = 2-1/2"x8-3/4"
45° Bevel = 2-1/2"x12-5/8"
PartNo
CRAFT 9-21292
Description
SAW MTR CMPND 15AMP 12
PartNo
CRAFT 9-22293
STND MULTI WRK SUP
Band Saws/Metal Cutting Saws
Wood Cutting Band Saw 1 HP
Solid cast iron table, tilts up to 45°. 1-piece unitized steel body, includes rip
fence and miter gauge. 110 volt, 1725 RPM single phase motor.
Wheel diameter = 18", Blade to column = 17-1/2", Max. cut thickness = 11",
Table size = 19" x 18"
Blade width = 3/16" - 1", Blade length: min. = 132", max. = 134", Speed
(FPM) = 2000, 3000
Motor HP = 1HP
PartNo
CRAFT F9-24396
Hold Down Clamp
Description
Description
SAW BND 1HP 18THRT 11CUT
Band Saw 14"
Holds stock firmly to miter gauge for accurate cuts. Not for table saws 92415,
9-24151, 9-2416, 9-22161,
9-2413. Will not fit miter gauge 9-24214.
PartNo
CRAFT 9-29935
Miter Gauge
Description
CLMP HOLD DWN TBL SAW
10 amp, 120V ball bearing capacitor start motor. 14" throat capacity, 6" max.
depth of cut. 2700 FPM blade speed. Uses 1/8", 1/4", 3/8", 1/2", 3/4" blades
from 91-1/2" to 93-1/2" long. Two 13-5/8" die cast aluminum wheels. 14" x
14" cast iron table tilts 15°L and 45°R. 2-piece hinged metal cover. Cast iron
frame. Dust collection chute, wheel cleaning brushes. Includes stand, miter
gauge, on/off switch with removable locking key.
PartNo
CRAFT 9-22424
Has degrees indicator; adjustable positive stops at 90°, 45° left or right. Fits
most table saws and tools with 3/4" x 3/8" deep miter groove.
PartNo
CRAFT 9-29937
Description
MTR GAUG TBL SAW
Phone: 402-455-6151
Toll Free: 800-488-9699
462
Description
SAW BND 10AMP 14THRT 6CUT
800-488-9699
Power/Air Tools
Metal Cutting Saw Wet/Dry 7"
Band Saws/Metal Cutting Saws
Metal Cutting Band Saw 3/4 HP
Solid cast iron table tilts up to 45°. 1 piece unitized steel body, includes rip
fence and miter gauge. 110 volt, 1725 rpm single phase motor.
Wheel diameter = 15", Blade to column = 14-5/8", Max. cut thickness = 81/2", Table size = 15" x 15"
Blade width = 3/16" - 3/4", Blade length: min. = 107", max. = 111", Speed
(FPM) = 80, 150, 200
Motor HP = 3/4HP
PartNo
CRAFT F9-24397
6-ft., 3-wire cord.
PartNo
CRAFT F9-22612
Description
SAW MTL WET/DRY 2HP 7IN
Arm Saw/Router Tables/Sanders
Radial Arm Saw 10" Laser Trac™
Description
SAW MTL 3/4HP 15IN
Wood Cutting Band Saw 3/4 HP
Solid cast iron table, tilts up to 45°. 1-piece unitized steel body, includes rip
fence and miter gauge. 110 volt, 1725 RPM single phase motor.
Wheel diameter = 15", Blade to column = 14-5/8", Max. cut thickness = 81/2", Table size = 15" x 15"
Blade width = 3/16" - 3/4", Blade length: min. = 107", max. = 111", Speed
(FPM) = 2000, 3000
Motor HP = 3/4HP
PartNo
CRAFT F9-24393
Description
SAW BND 3/4HP 15THRT 8-1/2C
Phone: 402-455-6151
Toll Free: 800-488-9699
Featuring Laser Trac™ cutting guide. Laser line is designed to assist the
operator in aligning the blade to the cut. Powerful 1.5 hp (3 hp max.
developed) induction motor provides the power required for even the toughest
cutting jobs. “CONTROL CUT” trigger actuated, variable speed, feed rate
control mechanism ensures accuracy and controls rate of cut. Sturdy, 27” x
44” MDF work surface, accommodates large work-pieces. Built in accessory
shaft accepts a variety of optional accessories. Rugged, stamped steel stand
with support stringers and non-skid adjustable feet. Includes 10” x 40T
carbide blade. Automatic blade brake stops blade in seconds. Motor offers
dual voltage, 13/6.5 amp, capacitor start and capacitor run operation. Tactile
gripped unit controls grouped by function for ease of use.
*** CAUTION ***
LASER RADIATION.
PartNo
CRAFT 9-22010
463
Description
SAW RADIAL ARM 1.5HP 10 PRO
Craftsman Tools
1-HP, 1725 rpm motor develops max. 2 HP. Oversized 4" x 8" quick-action
vise opens to AC.
12-1/2", 45° angle capacity. Cuts 7-1/2" dia., 7-1/4" x 12" rectangular stock,
7-1/4" rounds. 3 speeds/min: 86, 145, 180FPM. Hydraulic down feed. 93" x
3/4" blade. 2-gal. coolant reservoir. Incl. wet cut access; submersible pump,
hose nozzle, on/off valve, tubing. Approx. 50"L x 18"W x 40"H. 115V, 60Hz.
Power/Air Tools
Routing Center Large Stationary
Craftsman Tools
Arm Saw/Router Tables/Sanders
Sander 4" x 36" Belt/6" Disc
1. 27” x 18” table top gives you 486 sq. in. of work space. Portable design for
job site or workbench use. Features are extruded aluminum router table fence.
25” high floor stand. Includes 2 feather boards for additional work piece hold
down.
6-1/4" x 8-7/8" interchangeable tilting aluminum table can be used on either
belt or disc. Cast iron base. Quick tension release lever for belt changes.
Keyed on/off switch. Sanding belt dust extractor. Miter gauge included. 2/3
HP max. developed enclosed motor.
PartNo
CRAFT 9-21536
PartNo
CRAFT 9-26464
Description
ROUTER TBL LRG STAT PRO
Sander - Professional Belt/Disc
Description
SAND 4X36BLT 6DSC 2/3HP TLT
Sander 6" x 48" Belt/9" Disc
6" x 10" cast iron belt table. Belt operates vertically or horizontally. 9" cloth
backed PSA disc. 6" x 12" aluminum disc table with miter gauge slot tilts for
compound miter sanding (miter gauge included). 10.8 amp 3450 rpm motor.
2700 fpm belt speed, 3450 rpm disc speed. Stand included. Unit can be
mounted directly to a bench. Sawdust collection port.
PartNo
CRAFT 9-22593
Description
SAND 6X48BLT 9DSC 10.8AMP
Router Table Large Benchtop
Description
TBL ROUT 27X18IN PRO
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT F9-22606
464
Description
SAND 6X48BLT 12DSC 1-1/2HP
Router Table Floor Stand
2. Heavy-duty steel floor stand positions router table and incorporates nonslip leveling feet. Floor stand has two steel shelves for storage. Floor stand
will accept all router tables made since 1997. Tool not included.
PartNo
CRAFT 9-26478
Large 27"W x 18"D cast aluminum top with clear, anti-friction coating.
Heavy-duty “Drop-In’ router Mounting Plate mounts to any Craftsman router.
Parallel adjust expandable extruded aluminum fence with joining feature and
dust port. Heavy-duty structurally molded benchtop legs.
PartNo
CRAFT 9-26463
6" x 48" belt/12" disc. Belt speed 1,570 FPM, operates vertically or
horizontally. 4" dust collection port. 6" x 10" cast iron belt table with miter
gauge slot. Disc speed 2,000 RPM. 8-3/8" x 16" cast iron disc table with miter
gauge slot. 1-1/2 HP, 3,450 RPM, 110/220V motor pre-wired for 110V.
Includes enclosed steel cabinet, V-belt, drive pulley, miter gauge, on/off
locking rocker switch.
Description
ROUTER TBL FLR PRO
800-488-9699 or visit
www.johnday.com
Power/Air Tools
Grinders
Bench Grinder 10"
Planers/Jointers
Planer 15"
PartNo
CRAFT F9-22615
PartNo
CRAFT 9-21160
Description
GRNDR BNCH 10IN 1HP PRO
Bench Grinder 6" - 2,000-3,450 RPM
Description
PLNR 6HP 15X6MAX CUT
Industrial Rated Jointer Planer
120v 60Hz induction motors. Removable key switch. Independently operable
flexible lamp. Eye shields. Spark arrrestors. Ball-bearings. Top mounted
wheel dresser and clip. Cast iron base pre-drilled for bench mounting. Water
cooling trough. Two “U” shaped adjustable flat tool rests with detachable bit
sharpening tray.
Wheel Size = 6" x 3/4", Arbor = 1/2", Wheels = 1 wire wheel, Included = 160 grit, Volts = 120v
Balanced all-steel, 3-knife cutter head (ball bearings) provides 13,500 cuts per Amps = 2.0, RPM = 2,000-3,450, Variable Speed
min.; removable cutter head with quick replacement. Cuts 8-1/8"W x 1/2"D
max., positive stop at 1/8"D with override. Allows rabbeting. Built-in springs PartNo
Description
keep blades at proper height when adjustments are made; locking bar secures CRAFT 9-21152
GRNDR BNCHTOP 6IN VAR SPD
blades. Dovetail table ways allow easy height adjustment to in-feed, out-feed
tables; simplifies alignment of out-feed tables; simplifies alignment of outfeed table to cutter head (position locks on both tables). 9"W x 66"L cast-iron
table surface; 20" extensions include cast iron 4"H x 36"L tilt fence; adjusts L
45°, 90°, 45°R at positive stops with level control. 3450 rpm induction/
capacitor start motor. Overall 35-1/2"H x 25"W x 88"L. Steel cabinet has chip
chute, 4" hose adapter; houses 240v, 60Hz motor. Incl.: knife setting gauge,
push blocks, pulleys, belt switch, magnetic contactor box. 6-ft., 3-wire cord.
Key lock helps prevent unauthorized use.
PartNo
CRAFT F9-20651
Description
JNR-PLNR 240V 8-1/2X1/2MAX CUT
800-488-9699 or visit
www.johnday.com
Replacement Double Edge Blades
Package of 2. For 9-21743
PartNo
CRAFT 9-29459
Description
PLNR REPL BLD
Phone: 402-455-6151
Toll Free: 800-488-9699
465
Craftsman Tools
Up to 15,000 cuts per minute to smooth finish stock up to 15" wide, 6" deep
with maximum 1/8" depth of cut per pass. 3 HP single phase motor develops
6HP. 5,000 rpm with 15.0 amp draw at 220V. 2 feed rates: 16, 20 fpm. 3"
diameter, 3-knife cutter head with jack screws for accurate knife adjustment,
replacement. Exterior adjustment for in-feed and out-feed roller pressure and
chip breaker without disassembling. Anti-kickback feature. Totally enclosed
welded plate steel cabinet measures. 22-1/2" x 20-3/4" x 23-1/2" with built-in
chip chute. 45H" x 31W" x 32D" 14-gauge, 3-wire harness for motor. Push
button emergency stop button. Key lock helps prevent unauthorized use.
Powerful 1 HP industrial motor develops up to 2 HP. Large 10” diameter
grinding wheels have a 1” face. Operates at 1,725 rpm for optimal grinding
power and precision. Cast iron base and motor housing. Independently
operable lamp attachment. Large, “U”-shaped tool rests are adjustable and
include a detachable bit sharpening tray. Includes wheel dresser, coolant tray,
spark arrestors and large eye shields.
Power/Air Tools
Floorstanding Top Drill Press 15" - 310-4,000
RPM Range
Craftsman Tools
Drill Presses
Benchtop Drill Press 12"
Spindle to Column = 7-1/2", Rated HP = 1, Max. Dev. HP = 2, Speeds =
Variable,
Spindle to Column = 6", Rated HP = 2/3, Max. Dev. HP = ---, Speeds = 5,
RPM Range = 310-4,000, Chuck Type = JT6, Chuck Size = 5/8", Table Size
RPM Range = 540-3,600
= 16" x 13", Table Tilt = No
Chuck Type = JT33, Chuck Size = 1/2", Table Size = 10-/14" x 8-1/2", Table Table Swivel = No, Spindle Travel = 4-3/4", Column Size = 3.15", Base Size
Yes,
Tilt = Yes,
= 14-1/2" x 21"
Table Swivel = Yes, Spindle Travel = 2-3/8", Column Size = 2-11/32", Base Overall Height = 70", Built-in Light = No, Rack & Pinion Table Elevation =
Size = 14-3/8" x 8-1/4"
Overall Height = 37-3/32", Built-in Light = No, Rack & Pinion Table
Depth Scale = Rotary On Pinion Hub. Addt’n Features = Drill Chuck, Guard
Elevation = Yes
Depth Scale = Linear Rod, Addt’n Features = Fence
PartNo
CRAFT 9-21912
PartNo
CRAFT F9-22935
Description
DRL PRESS TBLTOP 2/3HP 12IN
Description
DRL PRESS FLR 1H VAR SPD 15
Floorstanding Top Drill Press 15" - 250-3,100
RPM Range
Floorstanding Top Drill Press 17"
Spindle to Column = 7-1/2", Rated HP = 2/3, Max. Dev. HP = 2/3, Speeds =
12, RPM Range = 250-3,100
Chuck Type = JT6, Chuck Size = 5/8", Table Size = 16" x 13", Table Tilt =
No, Table Swivel = No
Spindle Travel = 4-3/4", Column Size = 3.15", Base Size = 14-1/2" x 21",
Overall Height = 70
Built-in Light = No, Rack & Pinion Table Elevation = Yes, Depth Scale =
Rotary On Pinion Hub
Addt’n Features = Drill Chuck Guard
Spindle to Column = 8-1/2", Rated HP = 3/4, Max. Dev. HP = 1-1/2, Speeds
= 16,
RPM Range = 200-3,630, Chuck Type = JT3, Chuck Size = 5/8", Table Size
= 14-1/4"x14-1/4"
Table Tilt = Yes, Table Swivel = Yes, Spindle Travel = 3-1/4", Column Size
= 3-1/8"
Base Size = 11"x20-3/8", Overall Height = 64-7/8", Built-in Light = Yes,
Rack & Pinion Table Elevation = Yes, Depth Scale = Linear Rod, Addt’n
Features = Fence
PartNo
CRAFT 9-22925
Description
DRL PRESS FLR 2/3HP 12SPD
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-22917
466
Description
DRL PRESS FLR 3/4H 16SPD 17
Power/Air Tools
Power Tool Accessories
Drill Presses
Floorstanding Top Drill Press 20"
Drill Bits
Drill and Driver Set 11 Pc.
PartNo
CRAFT 9-26171
Description
SET BIT DRL DRVR SPD-LOK 11 PC
Drill Bit Set 115 Pc. HSS
Spindle to Column = 10", Rated HP = 1, Max. Dev. HP = 2, Speeds = 12,
RPM Range = 150-4,2000
Chuck Type = JT4, Chuck Size = 3/4", Table Size = 19-1/4"x18-3/8", Table
Tilt = Yes, Table Swivel = No
Spindle Travel = 4-23/32", Column Size = 3-1/3", Base Size = 17-3/4"x241/8", Overall
Height = 66-3/4"
Built-in Light = Yes, Rack & Pinion Table Elevation = Yes, Depth Scale =
Linear Rod,
Addt’n Features = Fence
PartNo
CRAFT 9-22920
Description
DRL PRESS FLR 1HP 12SPD 20-1/2
Benchtop Drill Press 9"
Industrial-quality bits for use on wood, plastic, metal. High-speed steel is
hardened, heat-treated, tempered for long-lasting strength. Precision ground
process ensures accurate geometry and hole size, plus fast material removal.
Black oxide coating reduces heat build-up. Twist type. 60 wire ga. bits, 1-60;
29 fractional bits, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16",
13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32",
23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"; 26
lettered bits, A - Z and metal index case.
PartNo
CRAFT 9-67115
Description
SET DRL HSS 115PC
Bit Set 14 Pc. Black Oxide Finish
Spindle to Column = 4-1/2", Rated HP = 1/3, Max. Dev. HP = 1/3, Speeds = Contains: 1/16", 7/64", 5/32", 7/32", 3/8", 5/64", 1/8", 11/64", 1/4", 1/2",
3/32", 9/64", 3/16", 5/16"
5, RPM Range = 620-3,100
Chuck Type = JT33, Chuck Size = 1/2", Table Size = 7-3/4" x 7", Table Tilt = Polystrene Case
Yes, Table Swivel = Yes
Spindle Travel = 2", Column Size = 1-7/8", Base Size = 12-1/8"x7-29/32",
PartNo
Description
Overall Height = 25-1/8"
CRAFT 9-66068
SET DRL SPL PT GRV 14PC BLK
Built-in Light = No, Rack & Pinion Table Elevation = No, Depth Scale =
Linear Rod
Addt’n Features = Fence/3" Vice
PartNo
CRAFT 9-24803
800-488-9699
Description
DRL PRESS TBLTOP 1/3HP 9IN
Phone: 402-455-6151
Toll Free: 800-488-9699
467
Craftsman Tools
Includes drive shaft, hex coupler, four countersink inserts (#6x3/32",
#8x7/64", #10x1/8", #12x1/8"), five screwdriver bits (Phillips #1, three each
#2, #3).
Power/Air Tools
Bit Set 29 Pc. Black Oxide Finish
Craftsman Tools
Drill Bits
Bit Set 14 Pc. Zirconium Nitride-Coated with
Polystyrene Case
Contains: 1/16", 5/32", 1/4", 11/32", 7/16", 5/64", 11/64", 17/64", 23/64",
29/64", 3/32", 3/16", 9/32", 3/8", 15/32", 7/64", 13/64", 19/64", 25/64",
31/64", 1/8", 7/32", 5/16", 13/32", 1/2", 9/64", 15/16", 21/64", 27/64"
Case
PartNo
CRAFT 9-66084
Contains: 1/16", 7/64", 5/32", 3/16", 1/4", 3/8", 5/64", 1/8", 11/64", 7/32",
5/16",
1/2", 3/32",
9/64"
PartNo
CRAFT 9-67074
Description
SET DRL SPL PT GRV 14PC
Description
SET DRL SPL PT GRV 29PC BLK
Bit Set 29 Pc. Zirconium Nitride-Coated with
Metal Case
Bit Set 15 Pc. Cobalt Drill
Work in the hardest metals; steel alloys, stainless steel, chrome, armor plate,
titanium alloys. Has 135° split-point tip so bit won’t “walk”. Includes 1/16",
5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16",
11/32", 3/8", 1/2" sizes and metal case. - Metal Case
PartNo
CRAFT 9-66858
Contains: 1/8", 13/64", 9/32", 23/64", 7/16", 9/64", 7/32", 19/64", 3/8",
29/64", 5/32", 15/64", 5/16", 25/64", 15/32", 11/64", 1/4", 21/64", 13/32",
31/64", 3/16", 7/64", 11/32", 27/64", 1/2"
PartNo
CRAFT 9-67029
Description
SET DRL SPL PT GRV 29PC
Screw Remover Set 3 Pc.
Description
SET DRL COBALT 15PC
Drill Bit/Power Screwdriver Set 16 Pc.
Speed-Lok™
Includes screw guide, quick connector, seven drill bits (1/16", 5/64", 3/32",
7/64", 1/8", 5/32", 3/16"), seven screwdriver bits (Phillips #1, two #2, #3,
slotted #4-5, #8-10, Robertson #2), case.
PartNo
CRAFT 9-26172
Description
SET BIT DRL SPD-LOK 16PC
Phone: 402-455-6151
Toll Free: 800-488-9699
468
1/4" hex shanks. Remove #6 to #14 screws. Works with any variable speed
reversible portable drill.
PartNo
CRAFT 9-52154
Description
SET SCRW EXTR 3PC
Power/Air Tools
Bit Set 40 Pc. Screwdriver
Drill Bits
Screwdriver Bit Set 30 Pc.
30 piece slotted and phillips screwdriver bit set.
Description
SET BIT SCRWDR 30 P
SET BIT SCRWDR 30 P
Bit Set 31 Pc. Magnite
With case. Industrial quality alloy tool steel bits. Includes seven nutdrivers
(7/16", 3/8", 11/32", 5/16", 9/32", 1/4", 3/16"); three double-end bits (#1
Phillips/6-8 slotted, #2 Phillips/8-10 slotted, #3 Phillips/10-12 slotted); six 31/2" extended reach power bits (#1, #2, #3 Phillips and 6-8, 8-10, 10-12
slotted); twenty-four 2" power bits (three #1 Phillips, five #2 Phillips, three #3
Phillips, three 5-6 slotted, three 6-8 slotted, three 8-10 slotted, two T15
Torx®, two R2 square recess).
PartNo
CRAFT 9-25607
CRAFT 9-25607
With 8" magnetic hand driver. Includes three slotted insert bits (5-6, 6-8, 810); three Phillips insert bits (#0, #1, #3); three Square insert bits (R1, R2,
R3); five Torx® bits (T-15, T-20, T-25, T-30, T-40); two 2" Phillips
powerbits (#1, #2); two 2" Slotted powerbits (5-6, 8-10); C-3 clutch insert bit;
five Hex bits (5/64", 3/32", 7/64", 1/8", 3/16"); P2R Phillips drywall bit; two
P2 Phillips insert bits; two Screw finders; 3" magnetic bit holder. Plastic case.
PartNo
CRAFT 9-25647
CRAFT 9-25647
Description
SET BIT SCRWDR 40PC
SET BIT SCRWDR 40PC
Drill Bit Set 60 Pc. Number Size
Description
SET BIT SCRDR MAGNITE 31PC
SET BIT SCRDR MAGNITE 31PC
Drill and Driver Set 31 Pc. Speed-Lok™
Industrial-quality bits for use on wood, plastic, metal. High-speed steel is
hardened, heat-treated, tempered for long-lasting strength. Precision ground
process ensures accurate geometry and hole size, plus fast material removal.
Black oxide coating. Includes number sizes 1 thru 60.
PartNo
CRAFT 9-52106
Includes one 1/4" quick connector, seven drill bits (1/16", 5/64", 3/32", 7/64",
1/8", 5/32", 3/16"), one drill/driver drive shaft, one drill/driver insert (#8 x
7/64"), one compact screw guide, seven 1" screwdriver bits (P1, 2 each P2,
P3, R1, 2 each slotted), six 2" power screwdriver bits (P1, P2, P3, R1, R2,
slotted), three flatted drill bits (3/32", 7/64", 1/8"), two replacement set
screws, two countersink inserts, case.
PartNo
CRAFT 9-26186
Description
SET BIT DRL-DRVR SPD-LOK 31 PC
Screw Remover Set 4 Pc.
Extracts sizes 1/4" to 1/2" (6mm to 12mm).
PartNo
CRAFT 9-52152
Description
SET SCRW EXTR 4PC
Phone: 402-455-6151
Toll Free: 800-488-9699
469
Description
SET DRL HSS SZ 1-60 60PC
Your Midwest
Distributor for
over 96 Years
Craftsman Tools
PartNo
CRAFT 9-25633
CRAFT 9-25633
Power/Air Tools
Craftsman Tools
Drill Bits
Screwdriver Bit and Hand Driver Kit 60 Pc.
Drill Bit Set Professional 29 Pc. Cobalt in Steel
Index Case
Work in the hardest metals; steel alloys, stainless steel, chrome, armor plate,
titanium alloys. Has 135° split-point tip so bit won’t “walk”. Includes: 1/16",
5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64",
Includes: six Phillips insert bits (#0, #1, #2R, #3(2 ea.), #2); four Robertson
1/4", 17/64", 9/32", 19/64", 5/16" 21/64", 11/32", 23/64", 3/8", 25/64",
insert bits (R1, R2, R3, R4); seven Torx® insert bits (T-10, T-15, T-20, T-25,
13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2" sizes in steel indexed. - 3
T-27, T-30, T-40); eight Slotted insert bits (1-2, 3-4, 4-5, 5-6, 6-8, 8-10, 10Folding Tray Case
12, 12-14); sixteen Hex insert bits (5/64", 3/32", 7/64", 1/8", 9/64", 5/32",
3/16", 7/32", 1/4", 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm); three Pozi
PartNo
Description
insert bits (#1, #2, #3); two Phillips powerbits (#1, #2); two slotted powerbits CRAFT 9-66116
SET DRL COBALT 29PC
(5-6, 8-10); seven Nutsetters (3/16", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16");
two Bitholders; two Hand drivers (8", 3-1/2"). Also includes finder sleeves
Grinding Accessories
and case.
PartNo
CRAFT 9-25649
CRAFT 9-25649
Grinder Stand 321/2" High Heavy Duty
Cast-Iron
Description
SET BIT SCRDR 60PC 2HDL
SET BIT SCRDR 60PC 2HDL
Nutdriver Bit Set 7 Pc.
Includes: 7/16", 11/32", 9/32", 3/16", 3/8", 5/16", 1/4"
PartNo
CRAFT 9-25682
Description
SET BIT NUT DR 7PC
Builder’s Set 85 Pc. Speed-Lok™
Bolts to floor (bolts not included). Includes cast iron cooling pot.
Unassembled.
In blow molded case. Contains Hex Shank drill bits (2 ea. 1/16", 1/8", 1/4",
/7/16"; 1 ea. 5/64", 3/32", 7/64", 5/32", 3/16", 3/8"w/7/16"), 7/16" Hex Shank
woodboring bits (3/8", 1/2", 5/8", 3/4" and 1"), 7/16" Hex Shank masonry bits
(1/8", 3/16", 1/4", 5/16", 3/8" and 1/2"), Speed-Lok™ Quick Connectors (1/4"
and 7/16"), Hex to Square adapters (1/4" to 1/2", 3/16" to 3/8"), Screw Guides
(standard, compact), High-torque handle. 1/4" Drive Sockets (3/8", 7/16",
1/2" and 9/16") Nut Setters (1/4", 5/16", 3/8", 7/16"), 2" Power Screwdriving
Bits (1 ea. P1, P3, T-20, R1, R2, #5 slotted, #8 slotted; two P2), 1" Insert
Screwdriver Bits (1 ea. R1, R2, T-15, T-20, #10 slotted, #8 slotted, #6 slotted,
#5 slotted; three P1; four P2; P3), Industrial Drill/Driver Shaft. Industrial Hex
Coupler. Countersinks with Drill Bits (#6w/3/32", #8w/7/64", #10w/1/8",
#12w/1/8") Self-centering Drill/Driver Inserts (#6, #8, #10).
PartNo
CRAFT 9-26185
Description
SET BIT DRL SPD-LOK 85PC
Phone: 402-455-6151
Toll Free: 800-488-9699
470
PartNo
CRAFT 9-19210
Description
GRNDR STAND CST IRN
Power/Air Tools
Bi-Metal Reciprocating Saw Blades
Grinding Point Set 6 Pc.
Grinding points are aluminum oxide. 1/4" shanks.
Key
No.
Diamete Length
A
1"
1"
B
1"
1/2"
C
1/2"
1-1/2"
D
3/8"
1"
E
3/4"
1-1/8"
F
3/4"
1"
Includes A, B, C, D, E and F.
PartNo
CRAFT 9-64720
PartNo
CRAFT 9-28931
CRAFT 9-28926
CRAFT 9-28927
CRAFT 9-28928
CRAFT 9-28929
CRAFT 9-28925
CRAFT 9-28930
Craftsman Tools
Pkg./5.
Catalog Description Uses†
9-28931 4", 24 TPI
9-28926 6", 10 TPI
9-28927 6", 14 TPI
9-28928 6", 18 TPI
9-28929 9", 6 TPI (C)
9-28925 6", 6 TPI (C)
9-28930 12", 6 TPI
(A)
(C)
(B)
(A)
(C)
Description
BLD RECP SAW 24PT 4 5PK
C-200 Silver Series Carbide Tipped Blades
Description
SET PWTL ELEC GRND POINTS 6PC
Jig Saw Blade 3"
Knife edge. For linoleum, rubber, and leather. 2 per package. All feature
individually ground teeth for sharpest possible edge. Universal style. Blades
fit all Craftsman jig saws.
PartNo
CRAFT 9-28814
Description
BLD SABRE KNFE EDGE 3 2PK
Blade Set 6 Pc.
Includes 2 each of 4", 24 TPI; 9", 6 TPI; 6", 14 TPI.
+NOTE: (A) Smooth metal cutting (B) Fast metal cutting (C) Fast wood
cutting
PartNo
CRAFT 9-28934
Description
SET BLD RECP SAW BI-MTL 6PC
Jig Saw Blade 6"
7 teeth per inch. For fast cutting-wood. Package of 1. All feature individually
ground teeth for sharpest possible edge. Universal style. Blades fit all
Craftsman®, jig saws.
PartNo
CRAFT 9-28812
Description
BLD SABRE 7PT 6 1PK
Phone: 402-455-6151
Toll Free: 800-488-9699
471
Dyanite carbide teeth. Reduced kick-back shoulder design.
PartNo
CRAFT 9-32277
Description
BLD CIRSAW C200 18PT 5-1/2T
CRAFT 9-32276
CRAFT 9-32278
BLD CIRSAW C200 18PT 5-1/2
CRAFT 9-32279
BLD CIR SAW C-200 18 7-1/4
CRAFT 9-32280
CRAFT 9-32281
CRAFT 9-26793
CRAFT 9-26795
BLD CIR SAW C-200 24PT 10
CRAFT 9-26796
BLD CIRTBL SAW C200 40PT 10
CRAFT 9-26798
BLD CIRTBL SAW C200 60PT 10
CRAFT 9-26800
CRAFT 9-26801
CRAFT 9-26804
CRAFT 9-26802
Type
Arbor
Gen.Pur./F 5/8",1/2"
ast
Gen.Pur./F
ast
Gen.
Purpose
Gen.Pur./F
ast
Gen.Pur./S
mth
Gen.Pur./F
ast
Gen.Pur/Fa
st
Gen.Purpos
e
Gen.Pur./Fi
n
Miter
Gen.Pur./M
iter
Smooth
Miter
Fine Miter
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
1"
1"
1"
Power/Air Tools
Jig Saw Blades
Craftsman Tools
C-300 Blades
Hardened plate. Dyanite carbide teeth.
9-32270; Diam. = 7", Teeth = 24, Arbor = 5/8", Type = Gen. Purpose
9-32273; Diam. = 7-1/4", Teeth = 40, Arbor = 5/8", Type = Gen. Purpose
9-26786; Diam. = 8", Teeth = 40, Arbor = 5/8"†, Type = Gen. Pur./Smth
9-26788; Diam. 9", Teeth = 40, Arbor = 5/8", Type = Master Combo
9-26789; Diam. = 10", Teeth = 40, Arbor = 5/8", Type = Gen. Purpose
9-26790; Diam. = 10", Teeth = 50, Arbor = 5/8", Type = Master Combo
9-26791; Diam. = 10", Teeth = 60, Arbor = 5/8", Type = Alum./Lam.
9-26792; Diam. = 10", Teeth = 72, Arbor = 5/8", Type = Trim
* - 1/2" Bushing provided.
† - Diamond Arbor Knockout
PartNo
CRAFT 9-32270
Description
BLD CIRSAW C300 24PT 7 GEN
CRAFT 9-32273
CRAFT 9-26786
CRAFT 9-26788
BLD CIRSAW C300 40PT 9 COMB
CRAFT 9-26789
CRAFT 9-26790
BLD CIRSAW C300 50PT 10COMB
CRAFT 9-26791
BLD CIRSAW C300 60PT 10ALUM
CRAFT 9-26792
BLD CIRSAW C300 72PT 10TRIM
Type
Gen.
Purpose
Gen.
Purpose
Gen.Pur./S
mth
Master
Combo
Gen.
Purpose
Master
Combo
Alum./Lam
.
Trim
Arbor
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
BLD SABRE 10PT 3-1/8 8PK
CRAFT 9-28757
CRAFT 9-28755
CRAFT 9-28813
CRAFT 9-28758
CRAFT 9-28784
CRAFT 9-28783
CRAFT 9-28785
Compressors
For
Fine
Scrolling in
wood.
Super fine
scrolling in
wood.
Super fine
scrolling in
wood.
Wallboard,
plaster
General
purpose
metal cutting
Bi-metal,
general
purpose-woo
d
Bi-metal,
fast
cut-wood
Bi-metal,
general
purpose-met
al
Air Tank 10 Gallon Horizontal
Industrial tolerances. Hand hammered and tensioned. Dyanite Carbide.
9-26780; Diam. = 10", Teeth = 24, Arbor = 5/8", Type = Rip
9-26784; Diam. = 12", Teeth = 24, Arbor = 1", Type = Rip
9-26785; Diam. = 12", Teeth = 80, Arbor = 1", Type = Trim/Finish
Description
BLD CIRSAW C400 24PT 10 RIP
BLD CIRSAW C400 24PT 12 RIP
BLD CIRSAW C400 80PT 12FNSH
PartNo
CRAFT 9-28756
5/8"
C-400 Blades
PartNo
CRAFT 9-26780
CRAFT 9-26784
CRAFT 9-26785
All feature individually ground teeth for sharpest possible edge. Universal
style. Blades fit all Craftsman® jig saws.
9-28756; 10 teeth/inch. 3-1/8". For fine scrolling in wood. 8 per package.
9-28757; 20 teeth/inch. 2-3/4". For super fine scrolling in wood. 8 per
package.
9-28755; 20 teeth/inch. 3-1/2". For super fine scrolling in wood. 8 per
package.
9-28813; 8 teeth/inch. 3-1/2". For wallboard, plaster. 2 per package.
9-28758; 20 teeth/inch. 2-3/4". General purpose metal cutting. 8 per package.
9-28784; 10 teeth/inch. 3-5/8". For bi-metal, general purpose-wood. 2 per
package.
9-28783; 6 teeth/inch. 3-5/8". For bi-metal, fast cut-wood. 2 per package.
9-28785; 12 teeth/inch. 2-3/4". For bi-metal, general purpose- metal. 2 per
package.
Type
Rip
Rip
Trim/Finis
h
Arbor
5/8"
1"
1"
472
135 PSI. Portable tank compressor with a gauge located at the top of the tank
for quick and easy pressure reading. Tank relief valve relieves excess
pressure. 3 ft. high-pressure air hose and tire chuck.
PartNo
CRAFT 9-15201
Description
AIR COMP PRTBL 10GAL 135PS
Power/Air Tools
Air Compressor Electric 2.0 HP, 4 Gallon
Compressors
Compressor 7.0 HP, 60 Gallon Vertical
PartNo
CRAFT F9-18419
Description
AIR COMP VERT ELEC 60GAL 6.5HP
Compressor 7.0 HP, 80 Gallon Vertical
PartNo
CRAFT 9-15214
Description
AIR COMP ELEC 4GAL 2HP
Air Compressor Electric 2-Stage 175 PSI, 25
Gallon Oil-free
22-1/2"L x 22-1/2"W x 51"H.
Delivers 17.4 SCFM @ 100PSI, 16.9 SCFM @ 175PSI. 175 max. PSI. 2stage pump. 2 cylinder oil-lube pump has die-cast aluminum head with cast
iron sleeves, automotive grade pistons, rings and connecting rods, finned
aluminum crankcase and balanced flywheel. Globe valve included. 240 volt,
60 hertz, 1 phase. 20 amp current required. ASME certified tank. 33-1/2"L x
31"W x 75-1/2"H.
PartNo
CRAFT F9-16780
PartNo
CRAFT 9-16778
Description
AIR COMP VERT ELEC 25 GAL 2STG
Air Compressor Electric 3 HP 15 Gallon
Description
AIR COMP VERT ELEC 80GL 7HP
Delivers 4.9 SCFM at 40 PSI and 3.5 SCFM at 90 PSI. 150 PSI Universal
motor, 120 volt. 15 amp current required. 34-1/4"L x 15-1/4"W x 30-3/4"H.
800-488-9699 or visit
www.johnday.com
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-16724
473
Description
Craftsman Tools
Delivers 12.4 SCFM @ 40PSI, 10.2 SCFM @ 90PSI. 135 max. PSI. Single
stage cylinder oil lube pump. Globe valve included. 240 volt, 60 hertz, 1
phase. 28-3/4"L x 28-1/4"W x 69-1/4"H.
Universal motor provides starting torque for improved operation in low
voltage conditions. Delivers 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI for
intermittent operation of certain air tools. 150 PSI maximum working
pressure. Measures 17-1/2"L x 17-1/2"W x 22-1/4"H. Lightweight. 120 volts.
UL listed.
Power/Air Tools
Air Compressor Electric 6 HP, 25 Gallon
Oillube
Compressors
Craftsman Tools
Air Compressor Electric 3.0 HP, 4 Gallon Side
Stack
Delivers 8.0 SCFM @ 40PSI, 5.7 SCFM @ 90PSI, 150 Max PSI. Twin tanks,
oil-free design for no maintenance. Full perimeter frame. 120 volt. 15 amp
current required. 21"L x 20"W x 19-1/2"H.
PartNo
CRAFT 9-16746
Description
AIR COMP ELEC SD STK 4GAL 3HP
This revolutionary technology employs a newly designed, two-stage
compressor, capable of obtaining the highest operating pressure of 175 PSI
for longer tool run (when compared to equal size, lower pressure
compressors) time.
Description
AIR COMP ELEC 25GAL 6HP PRO
Delivers 8.6 SCFM at 40 PSI, 6.4 SCFM at 90 PSI, 150 max PSI.
Maintenance free pump never needs oil. Advanced engineering eliminates
belts and pulleys. Fully shrouded pump and motor. 120 volt, 60 hertz, 1
phase. 15 amp current required. 41"L x 18"W x 35"H.
PartNo
CRAFT 9-16734
Description
AIR COMP 2STG 20GAL 3.5HP PRO
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-19541
Air Compressor Electric 6 HP, 33 Gallon
Compressor Electric 31/2 HP, 20 Gallon 2
Stage Oil-free
PartNo
CRAFT 9-16670
Delivers 8.6 SCFM @ 40PSI, 6.8 SCFM @ 90PSI. 150 Max PSI. Dual
capacitor motor with manual thermal overload protection. 2 cylinder oillube
pump with cast iron sleeves, automotive pistons and rings. Aluminum finned
crankcase and a balanced flywheel. 10" semi-pneumatic wheels. 120volts. 15
amp current required. 41-3/4"L x 19"W x 32-3/4"H.
474
Description
Power/Air Tools
Air Tools
Compressor Electric 6.0 HP, 30 Gallon Vertical
Compressor Professional “Twin-V” 7.0 HP,
Two Stage 60 Gallon Vertical
PartNo
CRAFT F9-16561
Description
Air Accessories
Hose Reel 1/2" x 50’ Heavy Duty Retractable
Delivers 8.6 SCFM at 40 PSI and 6.4 SCFM at 90 PSI. 150 PSI maximum
working pressure. Compressor has no belts to adjust and requires no oil for
maintenance-free operation. Handle and wheels for convenient portability.
Motor operates on standard 120 volt current. Measures approximately 24"L x
24"W x 52"H.
PartNo
CRAFT 9-16731
Description
GasCompressor 5 HP, 20 Gallon Heavy-Duty
Delivers 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI. 150 max. PSI
Universal motor, 120 volt. 15 amp current required. 34-1/4"L x 15-1/4"W x
30-3/4"H. Tools and hose not included.
PartNo
CRAFT 9-18642
Description
HOSE REEL HVY DTY 1/2X50
Air Hose 1/2" x 50’ Heavy-Duty
300 psi working pressure hose, 1200 bursting strength with 3/8” male and
female swivel end brass fittings. 4:1 safety factor, heavy-duty reinforcing,
abrasion-resistant cover.
PartNo
CRAFT 9-16114
Description
AIR HOSE RBR 1/2X50 HD
Air Hose Repair Kit 1/4"
Unit operates at 12.0 SCFM at 40 PSI, 10.0 SCFM at 90 PSI (maximum 110
PSI). Powered by a 4-cycle gasoline engine with recoil start, throttle control,
belt and pulley guard, and a 3 quart fuel tank shut off valve. Mounts on trucks
or converts easily to stationary operation. 8" diameter wheels. Overall
dimensions 36"W x 18"L x 33-3/4"H. Operates most air tools sold in this
catalog.
PartNo
CRAFT 9-15726
Specially designed for repairing breaks or replacing damaged 1/4” end
fittings. Easy to use. Includes solid brass hose splicer, 1/4” NPT female hose
fitting, 1/4” NPT male hose fitting, 3 hose clamps for attaching hose fittings.
Description
AIR COMP GAS 20GAL 5HP PRO
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-16370
475
Description
AIR HSE REP KIT 1/4
Craftsman Tools
Delivers 9.6 SCFM @ 40 PSI and 9.0 SCFM @ 90 PSI. 175 PSI maximum
pressure. 2-Stage, oil-free pump is efficient, durable and low maintenance.
7.0 HP maximum developed motor (240 volt only) directly drives pump
resulting in fewer parts, less maintenance and outstanding reliability; no belts
to adjust. Require 20-amp circuit. Meet ASME requirements. UL listed. 283/4"L x 28-1/4"W x 69-1/4"H.
Power/Air Tools
Air Compressor Accessory Kit 11 Pc.
Craftsman Tools
Air Tools
Coupler 1/4" Quick Connect
Quick connect and disconnect for fast air tool changes with reduced wear on
threaded fittings. For use on most 1/4” body quick-connect studs.
PartNo
CRAFT 9-16373
Stud Set 1/4"
Description
AIR QCK CNCT CUPLR UNV1/4
Includes: Blow gun with heavy-duty metal body and accurate lever-action air
control, four assorted nozzles for a variety of air blowing needs, assorted
inflators and adapter for inflating tires, sports equipment, air mattresses and
toys.
PartNo
CRAFT 9-16391
Description
AIR COMP ACCESS KIT 11PC
For quick connectors above. 3 NPT male. Pkg. of 3.
PartNo
CRAFT 9-16374
Description
SET AIR CNCT MLE NTP 1/4 3PC
Includes: 3/8”x15’ coil hose, six 1/4” quick-connect fittings (2 universal high
flow quick-connect couplers, three male and one female 1/4” studs), 360Þ
swivel connector, 1/4” shut-off valve, six plumbing components and Teflon
tape.
PartNo
CRAFT 9-16199
Description
SET AIR COMP ACSRY 16PC PRO
PartNo
CRAFT 9-16111
Description
Connector Kit /4" x 3/8" Male & Female
For use with air compressors. Provides an assortment of plumbing
components and inflating attachments. Includes: two 1/4” industrial couplers,
two 1/4” female NPT studs, three 1/4” NPT male studs, 1/4” female
connector, 1/4” male connector, blow gun, blow gun safety nozzle, two
inflation needles, tapered inflation needle, tire gauge, 1/4”x15’ coil hose, dual
tire chuck, Teflon tape, rubber blow gun nozzle and adapter.
PartNo
CRAFT 9-16191
For connecting air hoses together or air hoses to air tools. Specially designed
for use with all Craftsman® air compressors and air tools. Includes brass
adapter with 3/8” NPT female threads x 1/4” NPDT male threads, adapter
with 1/4” NPT female threads x 3/8” NPT male threads.
PartNo
CRAFT 9-16362
Description
AIR COMP ACCESS KIT 11PC
Phone: 402-455-6151
Toll Free: 800-488-9699
476
Description
SET AIR COMP ACSRY 20PC
Visit Us At
www.johnday.com
Power/Air Tools
Quick-Connect Studs 3/8", 1/4" Male NPT
Air Accessories
Hose 25’ Coil
Tough, abrasion-resistant urethane for use in the most rugged job
applications. Excellent memory for fast self-retraction. Heavy-duty brass
fittings.
PartNo
CRAFT 9-16180
PartNo
CRAFT 9-16381
Description
AIR QCK CNCT AUTO STD MLE 1/4
Air Hose Leader 3/8" x 2’ Heavy-Duty
Description
AIR HOSE SLF COIL 1/4DIA 25
Air Hose Repair Kit 3/8"
Specially designed for repairing breaks or replacing damaged 3/8” end
fittings. Easy to use. Includes solid brass hose splicer, 3/8” NPT female hose
fitting, 3/8” NPT male hose fitting, 3 hose clamps for attaching hose fittings.
PartNo
CRAFT 9-16371
PartNo
CRAFT 9-16116
Description
AIR HOSE LEAD 3/8X2 HD
Hose Reel 3/8" x 25’ Heavy Duty Retractable
Description
AIR HSE REP KIT 3/8
Studs 8" Automotive Quick-Connect Studs
1/4" Female NPT
Quick connect and disconnect for fast air tool changes with reduced wear on
threaded fittings. For use with all 3/8” automotive and universal quickconnect couplers. Specially designed for use with all Craftsman® air
compressors and air tools. Attach to tools, hoses and accessories with 1/4”
NPT male threads.
PartNo
CRAFT 9-16382
Description
AIR QCK CNCT AUTO STD FML
All-weather design is ideal for service centers and aircraft maintenance. For
air and water applications. All-steel construction with multi-position guide
arm for mounting on floor, wall, ceiling, bench or in pit. Pos-I-Latch and
adjustable hose bumpers automatically maintains working length of hose.
Permanently lubricated with banded drive springs for smooth hose retrieval.
Vibration-proof self-locking fasteners. 1/4" male fittings. Up to 200 PSI.
Tools and hose not included.
PartNo
CRAFT 9-18999
Description
Quick Connector Set 3/8"
Includes coupler with 3/8" NPT female threads; one 1/4" NPT male stud for
tools, one 3/8" NPT male stud for tools. Pkg. of 3.
PartNo
CRAFT 9-16378
Description
SET AIR CNCT CUPLR 3/8 3PC
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-16112
477
Description
Craftsman Tools
Quick connect and disconnect for fast air tool changes and reduced wear on
threaded fittings. For use with all 3/8” automotive and universal quickconnect couplers.
Power/Air Tools
Brass T-Connection
Allows two connectors from a single source. Specially designed for use with
all Craftsman® air compressors and air tools. 3 ports with 1/4” NPT female
threaded inlets provides air in plumbing your air system.
Craftsman Tools
Air Accessories
Paint Hose, 3/8" x 25’ Heavy-Duty
PartNo
CRAFT 9-16367
Description
AIR T-CNCT BRASS 1/4
Dual Tire Air Chuck
female swivel end brass fittings, one at each end. 4:1 safety factor, heavy-duty
reinforcing, abrasion-resistant cover.
PartNo
CRAFT 9-16115
Description
PAINT HOSE RBR 3/8X25 HD
PartNo
CRAFT 9-16113
Description
For truck tires. 1/4" female thread. 6" long.
PartNo
CRAFT 9-16386
Description
AIR COMP TRCK TIRE CHK 1/4 FEM
Heavy Duty Retractable Hose Reels
Air Compressor Accessory Starter Kit 9 Pc.
Includes: 15’x1/4” air hose, blow gun, 1/4” NPT female connect coupler and
2 studs with 1/4” NPT male threads.
PartNo
CRAFT 9-16392
Air Tool Oiler
1/4" NPT threads.
PartNo
CRAFT 9-16309
Blow Gun
Description
SET AIR COMP ACSRY 9PC
PartNo
CRAFT 9-18644
CRAFT 9-16398
CRAFT 9-16399
Inflator Kit
Description
AIR TOOL OILER
Meets OSHA req. Outlet pressure drops to less than 30 PSI when deadened.
Max. inlet pressure 150 PSI. Female thread. Lever action, round tip.
PartNo
CRAFT 9-16387
Description
BLOW GUN FEN THRD LVR ACTN
Phone: 402-455-6151
Toll Free: 800-488-9699
All-weather design is ideal for service centers and aircraft maintenance. For
air and water applications. All-steel construction with multi-position guide
arm for mounting on floor, wall, ceiling, bench or in pit. Pos-I-Latch and
adjustable hose bumpers automatically maintains working length of hose.
Permanently lubricated with banded drive springs for smooth hose retrieval.
Vibration-proof self-locking fasteners. 1/4" male fittings. Up to 200 PSI.
Tools and hose not included.
9-18644†; Length: 3/8" x 50'.
9-16398†; Length: 1/2" x 100'.
9-16399†; Length: 3/4" x 50'.
†Wall mount not included.
478
Description
Use to inflate sports equipment, beach toys, air mattresses, tires and more.
Includes tapered nozzle, inflation needle, hose adapter, blow gun adapter, tire
inflator, 3” extension tube.
PartNo
CRAFT 9-16389
Description
SET AIR INFL 6PC
Power/Air Tools
Tool Oil
Air Accessories
Long Tire Chuck and Gauge
PartNo
CRAFT 9-18910
Description
OIL AIR TOOL 1PT
Air Tools
Reads 10-90 PSI. 12" hose, 6" chuck. Turns 360°, 1/4" female hose
connection.
Impact Wrenches
Retractable Table Closed Face Hose Reel - For Impact Wrench 1/2" Square Drive - Length
7-1/2 in. - Max. Torque 500
Compressed Air
PartNo
CRAFT 9-16388
Description
AIR COMP TIRE CHK 1/4
Polypropylene. Clock type spring rewind mechanism. 2 position switch for
free run or 2" locking mode. Includes hose and mounting bracket. 17-1/4"H x
Std Bolt Size (in) = 1/2, Length (in) = 7-1/2, Avg Air Consumpt (CFM) = 5.0,
19-1/4"W x 9-3/4"D. PVC const.; 3/8" I.D.; 5/8" O.D.; 50' length. Max PSI
Air Inlet NPT = 1/4, Min. Hose Size (in) = 3/8, Wkg Torque ft./lb. = 25/350,
350.
Max. Torque ft./lb. = 500
PartNo
Description
CRAFT 9-16340
HOSE REEL RETRACT 50
Retractable Table Closed Face Hose Reel - For
Compressed Air/Cold Water
Polypropylene. Clock type spring rewind mechanism. 2 position switch for
free run or 2" locking mode. Includes hose and mounting bracket. 17-1/4"H x
19-1/4"W x 9-3/4"D. PVC const.; 1/2" I.D.; 3/4" O.D.; 50' length. Max PSI
350.
PartNo
CRAFT 9-16342
PartNo
CRAFT 9-18899
Description
PRTL AIR WR IMP 1/2D 500TRQ
Impact Wrench 1/2" Square Drive - Length
Description
HOSE REEL AIR/WTR RETRCT 50
Tire Air Chuck
1/4"F head.
PartNo
CRAFT 9-16385
PartNo
CRAFT 9-19914
Description
AIR COMP TIRE CHK 1/4 FEM
Phone: 402-455-6151
Toll Free: 800-488-9699
479
Description
Craftsman Tools
1 Pint.
Power/Air Tools
Craftsman Tools
Air Tools
Impact Wrenches
Max. Torque ft./lb. = 500, Extended 2" anvil
PartNo
CRAFT 9-19987
PartNo
CRAFT 9-18852
Description
Description
Std Bolt Size (in) = 9/16, Length (in) = 7-1/4, Avg Air Consumpt (CFM) =
5.0, Air Inlet NPT = 1/4, Min. Hose Size (in) = 3/8, Wkg Torque ft./lb. =
25/375, Max. Torque ft./lb. = 600
PartNo
CRAFT 9-19902
Description
Max. Torque ft./lb. = 550, Extended 2" anvil
PartNo
CRAFT 9-19915
Description
Impact Wrench 1/4" Drive Reversible
7-1/8 in.
4.8, Air Inlet (NPT) = 1/4, Min. Hose Size (in) = 3/8,Wkg Torque ft./lb. =
50/400, Max. Torque ft./lb. = 600
PartNo
CRAFT 9-19905
PartNo
CRAFT 9-18854
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
Lightweight aluminum housing. Produces up to 25ft./lbs. of working torque.
Delivers 1,500 impacts per minute. 10,000 rpm free speed. 1/4-in. air inlet.
Average 3.0 SCFM at 90 PSI. Variable speed trigger. Ball-type socket
retainer.
480
Description
Power/Air Tools
Air Tools
Impact Wrenches
Impact Wrench 3/4" Square Drive - Length 10
in. - Max. Torque 700
Impact Wrench 3/4" Square Drive- Length 8.2
in.
Std Bolt Size (in) = 3/4, Length (in) = 10, Avg Air Consumpt (CFM) = 7, Air
Inlet NPT = 1/4, Min. Hose Size (in) = 3/8, Wkg Torque ft./lb. = 100/700,
PartNo
CRAFT 9-18582
Description
Impact Wrench 3/4" Square Drive - Length 10
in. - Max. Torque 950
Std Bolt Size (in) = 1, Length (in) = 10, Avg Air Consumpt(CFM) = 7-1/2,
Air Inlet NPT = 3/8
Min. Hose Size (in) = 1/2, Wkg Torque ft./lb. = 100/700, Max. Torque ft./lb.
= 950
PartNo
CRAFT 9-19910
Description
PartNo
CRAFT 9-18593
Description
PRTL AIR WR IMP 3/4D 1100TQ
5-1/4 in.
PartNo
CRAFT 9-19946
Description
PRTL AIR WR IMP 3/8DR 50TRQ
5-5/8 in.
14-1/2 in.
Std Bolt Size (in) = 1, Length (in) = 14-1/2, Avg Air Consumpt (CFM) = 7,
Air Inlet NPT = 1/4,
Min. Hose Size (in) = 3/8, Wkg Torque ft./lb. = 150/700, Max. Torque ft./lb.
= 700, Extended 6" anvil
PartNo
CRAFT 9-18504
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
481
4.0, Air Inlet NPT = 1/4, Min. Hose Size (in) = 3/8, Wkg Torque ft./lb. =
25/200, Max. Torque ft./lb. = 260
PartNo
CRAFT 9-19916
Description
Craftsman Tools
Std Bolt Size (in) = 1, Length (in) = 8.2, Avg Air Consumpt(CFM) = 9-1/2,
Power/Air Tools
Craftsman Tools
Air Tools
Impact Wrenches
5-7/8 in.
Air Drill 3/8" Reversible
Length (in) = 7-1/2, Speed RPM = 1800, Air Inlet NPT = 1/4, Min. Hose Size
(in) = 3/8, Avg. Air Consump. CFM = 5.0
PartNo
CRAFT 9-19988
Description
PRTL AIR DRL 3/8DR 1800RPM
Air Drill 3/8" Reversible Keyless Chuck
Std Bolt Size (in) = 3/8, Length (in) = 5-7/8, Avg Air Consumpt (CFM) 3.6,
PartNo
CRAFT 9-19944
Description
PRTL AIR WR IMP 3/8DR BFLY 75T
Drills
Air Drill 1/2" - 500 RPM
Length (in) = 7, Speed RPM = 2200, Air Inlet NPT = 1/4, Min. Hose Size (in)
= 3/8, Avg. Air Consump. CFM = 5.0
PartNo
CRAFT 9-19904
Description
PRTL AIR DRL 3/8DR 2200RPM
Air Drill 3/8" Right Angle
PartNo
CRAFT 9-18892
Description
PRTL AIR DRL REV 1/2D500RPM
Length (in) = 8, Speed RPM = 1800, Air Inlet NPT = 3/8, Min. Hose Size (in)
= 3/8, Avg. Air Consump. CFM = 5.0
Air Drill 1/2" - 800 RPM
PartNo
CRAFT 9-18514
Description
PRTL AIR DRL RT ANG 3/8DR
Ratchets/Hammers/Cutters
Chipping Hammers 4 Bolt
PartNo
CRAFT 9-19912
Description
PRTL AIR DRL REV 1/2D800RPM
Phone: 402-455-6151
Toll Free: 800-488-9699
482
Adjustable exhaust deflector. 3/8" NPT inlet bushing.
9-19026 Stroke Length: 2", 2300 blows/min, Shank size .680", 14" length.
9-19027 Stroke Length: 3", 2100 blows/min, Shank size .680", 15-1/4" length.
9-19028 Stroke Length: 4", F2630 1700 blows/min, Shank size: .680", 161/2" length.
PartNo
CRAFT 9-19026
CRAFT 9-19027
Description
PRTL AIR HMR IMP CHP 4BLT 2
Power/Air Tools
Air Ratchet 3/8" Square Drive - Max. Torque 45
Air Tools
Chipping Hammers 4 Bolt
Description
Std Bolt Size (in) = 3/8, Length (in) = 10, Avg Air Consumpt (CFM) = 4.0,
Air Inlet NPT = 1/4, Speed RPM = 3/8, Min. Hose Size (in) = 150, Wkg
Torque ft./lb. = 5-45, Max. Torque ft./lb. = 45
Air Ratchet 1/2" Square Drive
PartNo
CRAFT 9-19992
Description
PRTL AIR RAT 3/8DR 45TRQ
Std Bolt Size (in) = 1/2, Length (in) = 14-1/2, Avg AirConsumpt (CFM) =
6.0, Air Inlet NPT = 1/4, Speed RPM = 3/8, Min. Hose Size (in) = 150, Wkg
PartNo
CRAFT 9-18819
4.0, Air Inlet NPT = 1/4, Speed RPM = 3/8, Min. Hose Size (in) = 270, Wkg
Description
Air Ratchet 1/4" Square Drive
PartNo
CRAFT 9-19891
Description
Std Bolt Size (in) = 3/8, Length (in) = 10, Avg Air Consumpt (CFM) = 4.0,
PartNo
Description
CRAFT 9-19945
Blade Pack 10 Pc. For Air Saw
Includes 6 scroll saw blades (2 18T, 2 24T, 2 32T) and 4 all-purpose blades (2
18T, 2 32T).
PartNo
CRAFT 9-18835
PartNo
CRAFT 9-19919
Description
Air Cutter
Description
PRTL AIR SAW BLADE PK 10PC
Wheel Size (in) = 2-7/8, Length (in) = 7, Air Inlet NPT = 1/4, Min. Hose Size
(in) = 3/8, Avg. Air Consump. CFM = 4.0, Speed RPM = 20,000
PartNo
CRAFT 9-19943
Description
PRTL AIR CUT 2-7/8WHL 20000 RPM
800-488-9699
Description
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-19990
483
Craftsman Tools
PartNo
CRAFT 9-19028
Power/Air Tools
Multi-Ratchet 3-in-1 Wrench Kit
Craftsman Tools
Air Tools
Air Impact Hammer
Shank Opening (in) = .401, Bore Diameter (in) = 3/4, Piston Stroke (in) = 25/8, Avg. Air Consump. (CFM) = 4.0, Air Inlet NPTF = 1/4, Min. Hose Size
(in) = 3/8, Blows per Minute = 3000
PartNo
CRAFT 9-19897
Description
PRTL AIR HMR IMP 3000BPM
Length (in) = 9-3/8, Air Inlet NPT = 1/4, Min. Hose Size (in) = 3/8, Avg Air
Consumpt (CFM) = 2.0. Strokes/Minute = 5000
Description
PRTL AIR SAW RECIP 4800RPM
CRAFT 9-19900
Description
SET PRTL AIR RAT/WR 3IN1 9P
Wheel Size (in) = 4, Length (in) = 8-3/4, Air Inlet NPT = 1/4, Min. Hose Size
(in) = 3/8, Avg. Air Consump. CFM = 7.0, Speed RPM = 11,000
PartNo
CRAFT 9-18811
Air Shear
Description
PRTL AIR GRND 4 11000RPM
Angle Air Grinder - Wheel Size (in) of 4-1/2 - 5
Length: 8-1/2"., Air Inlet: 1/4"., Min. Hose Size: 3/8". Average Air
Consumption: 4.0 cfm., SPM: 2800. Width of Cut: 7/32", Max thickness of
cut: 18 gauge steel.
PartNo
CRAFT 9-19014
PartNo
Grinders
Angle Air Grinder - Wheel Size (in) of 4
Air Reciprocating Saw
PartNo
CRAFT 9-19868
5/8" shank opening accepts included 1/4" hex bit holder, 3/8" sq. drive
retainer, 1/2" sq. drive retainer and 3/8" universal swivel. Tool is either a 3/8"
or 1/2" socket drive or a 1/4" hex bit holder. 2 slotted bits (#5, #7) and 2
Phillips bits (#2, #3) also included. 10" long, 150 RPM, 45 ft. lbs. max.
torque. 1/4" air inlet, 3/8" hose size. 90 PSI max. op. pressure. Blow-molded
case.
PartNo
CRAFT 9-19911
Description
PRTL AIR SHEER 7/32
Phone: 402-455-6151
Toll Free: 800-488-9699
Wheel Size (in) = 4-1/2 - 5, Length (in) = 8-7/8, Air Inlet NPT = 3/8, Min.
Hose Size (in) = 3/8. Avg. Air Consump. CFM = 7.0, Speed RPM = 12,000
484
Description
PRTL AIR GRND 4-1/2-5 12000 RPM
Power/Air Tools
Air Sander 2-3/4" x 17-1/2" Pad
Air Tools
Grinders
Grinder Kit with 10 Grinding Points
PartNo
CRAFT 9-18970
Description
PRTL AIR SAND PAD LNG 6500 RPM
Air Sander -2/3" x 6-3/8" Pad
Rear Exhaust. Includes 10 grinding points, 1/8" collet adapter, collet wrench
and plastic case. Available with grinding points or carbide bits. Length (in) =
6, Collet Size (in) = 1/4, Air Inlet NPT = 1/4, Min. Hose Size (in) = 3/8, Avg.
Air Consump. CFM = 6, Speed RPM = 22,000
PartNo
CRAFT 9-18879
Description
PRTL AIR DIE GRND KIT 13PC
Grinder Kit with 7 Carbide Bits
Strokes per Min. = 6,500, Length (in) = --, Air Inlet NPT = 1/4, Min. Hose
Size (in) = 3/8, Avg. Air Consump. CFM = 3.5
PartNo
CRAFT 9-18827
Description
PRTL AIR SAND ORB 6500RPM
Air Sander 6" Pad - 10,000 RPM
Rear Exhaust. Includes 7 carbide bits and plastic case. Available with
grinding points or carbide bits. Length (in) = 6, Collet Size (in) = 1/4, Air
Inlet NPT = 1/4, Min. Hose Size (in) = 3/8, Avg. Air Consump. CFM = 6,
Speed RPM = 22,000
PartNo
CRAFT 9-19025
Description
PRTL AIR DIE GRND KIT 10PC
PartNo
CRAFT 9-19976
Sanders
Strokes per Min. = 2,600, Length (in) = 12, Air Inlet NPT = 1/4, Min. Hose
Size (in) = 3/8, Avg. Air Consump. CFM = 4.5
Speed RPM = 12,000, Length (in) = 6, Avg. Air Consump. CFM = 8, Air
Inlet NPT = 1/4, Min. Hose Size (in) = 5/16
PartNo
CRAFT 9-19906
Description
PRTL AIR SAND PAD 2100RPM
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
PRTL AIR SAND PAD 6 10000RP
Air Sander 2-3/4" x 12" Pad
PartNo
CRAFT 9-18856
Speed RPM = 10,000, Length (in) = 10-1/2, Avg. Air Consump. CFM = 4,
Air Inlet NPT = 1/4, Min. Hose Size (in) = 3/8
485
Description
Craftsman Tools
Strokes per Min. = 2,600, Length (in) = 17-1/2, Air Inlet NPT = 1/4, Min.
Hose Size (in) = 3/8, Avg. Air Consump. CFM = 5.0
Power/Air Tools
Stapler Kit 1/4" Crown 18 Gauge
Craftsman Tools
Air Tools
Sanders
Magnesium gun body is lightweight for operation comfort. Rear exhaust for
quiet operation. Adjustable depth of drive adjusts fastener depth with the spin
of a wheel. Replacement nails would be the 18 Gauge 1/4" crown staples: 918333, 9-18334, 9-18336, 9-18371
Speed RPM = 13,000, Length (in) = 6-1/2, Avg. Air Consump. CFM = 4-1/2,
Air Inlet NPT = 1/4, Min. Hose Size (in) = 3/8
PartNo
CRAFT 9-19965
Description
PRTL AIR STPL 1/4CRWN 3/8-1
Brad Nails 8 Gauge
Description
Air Sander 7" Pad
For 9-18172 and 9-18173. Box of 5,000.
The following are NOT for: 9-18173, 9-18360, 9-18361, 9-18362
Speed RPM = 4,500, Length (in) = 12.5, Avg. Air Consump. CFM = 7, Air
Inlet NPT = 1/4, Min. Hose Size (in) = 3/8
PartNo
CRAFT 9-19024
PartNo
CRAFT 9-18171
Description
PRTL AIR SAND ORB 6500RPM
PartNo
CRAFT 9-18341
CRAFT 9-18342
CRAFT 9-18343
CRAFT 9-18360
CRAFT 9-18361
CRAFT 9-18362
Brad Nailer Kit 2"
Drives 18 gauge brad nails from 5/8" to 2" long. 1/4" NPT air inlet. Kit
includes plastic case, 1/4" quick connector. Replacement nails would be the
18 Gauge brad nails: 9-18341, 9-18342, 9-18343, 9-18360, 9-18361, 9-18362
PartNo
CRAFT 9-18172
Nailers
Stapler Kit 1/2" Crown
Description
NAIL BRAD 18GA 1-1/4 5000PK
Description
PRTL AIR BRAD 18GAUG 5/8
Framing Nailer 3-1/2" Angle Clipped-Head
Lightweight magnesium gun body. In-line magazine. Baffled exhaust. For
framing decking, truss building, fencing, flooring. Some local regulations may
require the use of full head nails for construction. Drives clipped-head
framing nails from 2" to 3-1/2" long. Replacement nails would be the Clipped
Head Angle Framing Nails 28° Galvanized: 9-18357, 9-18358, 9-18359, 918351, 9-18352, 9-18353
PartNo
CRAFT 9-18179
Description
PRTL AIR NAIL ANG FRM CLP
Framing Nailer 3-1/2" Angle Full-Head
Replacement nails would be the Full Head Angle Framing Nails 22°: 918375, 9-18376, 9-18377, 9-18378
Lightweight stapler. Drives 20 gauge 1/2" crown staples from 3/8" to 1"
lengths. Avg. 0.5 SCFM at 90 PSI. 110 staple capacity. Oilless. Includes
storage case, 1/4" NPT male stud, 1,000 7/8" staples. Replacement nails
would be the following 20 Gauge, 1/2" crown staples: 9-18379, 9-18330, 918331, 9-18332
PartNo
CRAFT 9-18170
Description
PRTL AIR STPL 1/2CRWN
Phone: 402-455-6151
Toll Free: 800-488-9699
486
PartNo
CRAFT 9-18178
Description
PRTL AIR NAIL ANG FRM FUL
Visit Us At
www.johnday.com
Power/Air Tools
Coil Roofing Nailer
Air Tools
Nailers
Air Nailer Bag
Fully padded. Carries most air nailers. Double-wall PVC and polyester fabric.
Wide opening for easy access - fits tools up to 13-3/4"high and 21" long.
Tools not included.
PartNo
CRAFT 9-19120
Description
PRTL AIR NAIL BAG 13-3/4-21
Angle Finishing Nailer
PartNo
CRAFT 9-18180
Description
PRTL AIR NAIL COIL ROOF
Common Clipped Head Nails with Plain Shank
for 9-18179
Galvanized = Box of 1000, Not Galvanized = Box of 2000. For interior use.
PartNo
Galvanized
CRAFT 9-18357
CRAFT 9-18358
CRAFT 9-18359
Lightweight magnesium gun body. In-line magazine. 360° directional
exhaust. Rubber grip handle. 3 position switch on trigger: sequential, contact
trip or lock mode. Rubber nose tip to help prevent softwood marring. Drives
15 gauge angle finish nails from 1-1/4" to 2-1/2" long. Includes storage case,
1/4" NPT male stud, air tool oil, 2 hex wrenches. Replacement nails would be
the 15 Gauge finish nails: 9-18348, 9-18349, 9-1835
PartNo
CRAFT 9-18177
Not Galvanized
CRAFT 9-18351
CRAFT 9-18352
CRAFT 9-18353
Description
NAIL CLIP GAL 2-1/2 1000PK
NAIL CLIP GAL 3 1000PK
NAIL CLIP GAL 3-1/2 1000PK
NAIL CLIP NONGAL 2-1/2 1000
NAIL CLIP NONGAL 3 1000PK
NAIL CLIP NONGAL 3-1/2 1000
Crown Staples
Description
PRTL AIR NAIL ANG FNSH 15
Brad Nailer Kit
20 gauge 1/2" crown staples are for 9-18170. Box of 5000, except 1" is
4000/box.
18 gauge 1/4" crown staples are for 9-18171. Box of 5000, except 1" is
4000/box.
Lightweight 18-gauge nailer has narrow nose for fastening window and door
moldings, picture frame and cabinet construction. Drives 3/8" to 1-1/4" brads.
110 brad capacity. Kit includes plastic case, 3000 1-1/4" nails, 1/4" quick
connector. Replacement nails would be the 18 Gauge brad nails: 9-18340, 918341, 9-18342, 9-18343
PartNo
CRAFT 9-18173
Description
PRTL AIR BRAD 18GAUG 3/8
Phone: 402-455-6151
Toll Free: 800-488-9699
487
PartNo
20 Gauge 1/2" Crown Staples
CRAFT 9-18330
CRAFT 9-18332
CRAFT 9-18331
CRAFT 9-18379
18 Gauge 1/4" Crown Staples
CRAFT 9-18333
CRAFT 9-18334
CRAFT 9-18336
CRAFT 9-18371
Description
STAPL CRWN 20 GA 3/8 5000PK
STAPL CRWN 20 GAUG 1 4000PK
STAPL CRWN 18 GAUG 1 4000PK
Craftsman Tools
Drives large head roofing nails, 3/4" to 1-3/4" long and .120 shank diameter.
1/4" NPT air inlet. 120 coil capacity. Average pressure 0.9 SCFM at 90 PSI.
Includes storage case.
Power/Air Tools
Steel Finishing Nails
Air Tools
Nailers
Finish Nailer Kit
Craftsman Tools
25 gauge steel finish nails are for 9-18175. Box of 2500, except 3/4" box of
5000.
15 gauge steel finish nails are for 9-18177. Box of 4000, except 9-1/2" box of
3000.
PartNo
16 Gauge Steel Finish Nails
CRAFT 9-18345
CRAFT 9-18344
CRAFT 9-18346
CRAFT 9-18347
CRAFT 9-18368
Drives 16-gauge nails up to 2-1/2" long into hardwoods. Ideal for door and
window manufacturing, completing trimming and paneling. Drives 3/4" to 21/2" nails. 100 nail capacity. Includes plastic case. Replacement nails would
be the 16 Gauge finish nails: 9-18344, 9-18368, 9-18345, 9-18346, 9-18347
PartNo
CRAFT 9-18175
Description
PRTL AIR NAIL FNSH 16GAUG
Full Head angle framing Nails
15 Gauge Steel Finish Nails
CRAFT 9-18348
CRAFT 9-18349
CRAFT 9-18355
Spray Guns
Description
NAIL FINISH 16GA 3/4 5000
NAIL FINISH 16GA 1-1/4 2500
NAIL FINISH 16 GA 2 2500PK
NAIL FINISH 15 GA 2 4000PK
Spray Gun 1 Quart
For 9-18178. 1000/box, except 9-18375 is 2000/box.
PartNo
CRAFT 9-18375
CRAFT 9-18376
CRAFT 9-18377
CRAFT 9-18378
Description
NAIL ANG FRAME 2-3/8 2000PK
NAIL ANG FRAME 3 1000PK
Galvanized Roofing Nails
For 9-18180. .120 shank diameter, 120 nails per coil, 2,880 nails per box.
PartNo
CRAFT 9-18413
CRAFT 9-18414
PartNo
CRAFT 9-15517
Description
PRTL AIR SPR GUN 1QT PRO
Detail Touch-Up Spray Gun
Description
NAIL ROOF GAL 1 2880PK
NAIL ROOF GAL 1-1/4 2880PK
Palm-Air Driver Kit
Drives single nails where hammers and other power fasteners won’t work. 3
guide tips: framing nail, roofing nail, finishing nail. Magnetic nose. Leather
boot with finger loops. Includes storage case, 1/4" NPT male stud, air tool oil,
adjusting tools and rebuild kit.
PartNo
CRAFT 9-18201
PartNo
CRAFT 9-15002
Description
PRTL AIR NAIL PALM DRIVER
Phone: 402-455-6151
Toll Free: 800-488-9699
Siphon feed converts to pressure feed with remote paint tank, facing page.
Non-bleeder-type spray gun has 1 pint canister. Features a machined brass air
cap and a fluid tip. Separate fluid and air controls allow fine adjustment.
External mix spray nozzle provides a fine finish. Has a universal lever for left
or right-hand use. Storage hook. Requires 3.4 SCFM at 40 PSI.
488
Description
PRTL AIR SPR GUN TCH-UP 1PT
Power/Air Tools
HVLP Gravity Feed Spray Gun
Air Tools
Spray Guns
Heavy-Duty General-Purpose Spray Gun
PartNo
CRAFT 9-15524
Description
PRTL AIR SPR GUN HVYDTY 1QT
High-Performance Spray Gun
PartNo
CRAFT 9-15531
Description
PRTL AIR SPR GUN HVLP 1QT
Maintenance
Maintenance Tools
Vacuums & Vacuum Accessories
Collection Bags 12 Gallon, 5 pk.
Non-bleeder-type gun. Machined brass external air cap. Hardened steel fluid For following wet-dry vacs: 9-17924
tip for longer life and 1-quart siphon-feed canister with quick-release and dripDescription
free lid. Separate adjustable fluid and fan controls. Converts to pressure-feed PartNo
CRAFT 9-17844
BAG VAC WETDRY 12GAL 5PK
with remote paint tank, facing page. Requires 7.0 SCFM at 40 PSI.
PartNo
CRAFT 9-15535
Wet/Dry Vac Industrial, 12 Gallon, 2.5 HP,
2-Stage Motor
Description
PRTL AIR SPR GUN HIGH PREF 1QT
High-Volume Low-Pressure Spray Gun
Operates with minimal overspray. Tip openings and needles have been
enlarged, plus the spray cap has large holes to create a high-volume low
pressure spray. One quart capacity. Requires 7.0 SCFM at 40 PSI.
PartNo
CRAFT 9-15519
PartNo
CRAFT 9-17924
Description
PRTL AIR SPR GUN LOW PRESS 1QT
Phone: 402-455-6151
Toll Free: 800-488-9699
Industrial strength vacuum features a 9 amp dual-stage motor. Stainless steel
drum with tank drain on 4-wheel heavy-duty dolly. Accessories include 10’x11/2” crushproof hose with Roto-Lok™ end, 2 extension wands, brush and
squeegee nozzles. 2.5 hp. Uses Filter: 9-17842 HEPA Filter
489
Description
VAC WETDRY 12 GAL 2.5HP
Craftsman Tools
Non-bleeder-type gun. External mix converts to internal mix with air cap
(included), plus converts easily to pressure feed with cup lid (no tools
required). Aluminum 1-quart siphon/pressure, drip-free feed canister and
separate adjustable fluid and fan controls. Can be used with remote paint tank,
facing page. Aluminum gun body with epoxy finish. Use with all types of
paints, stains. Requires 4.5 SCFM at 40 PSI.
Uses a high volume of air delivered at low pressure to atomize paint. High
grade die-cast alloy gun body is durable and lightweight. Stainless steel fluid
inlet and needle resist corrosion and are waterborne compatible. 20 oz. gravity
feed cup has a screw-on lid with built-in “drip check” to help prevent leaks
through the lid vent hole. 1.5mm multipurpose fluid tip for spraying various
materials. Adjustable fluid and spray controls with setting markers let you
adjust from fan to round spray patterns and regulate paint flow for smooth,
uniform coverage.
Craftsman Tools
Maintenance
Maintenance
Tools
Wet/Dry Vac, 12 Gallon 2-Stage Motor
Wet/Dry Vac, 16 Gallon 6.0 HP
The 8.5 amp, dual-stage motor is 35% quieter than standard Craftsman
wet/dry vacs. Hard metal drum sits on a durable metal vac cart. Cart includes
swivel ball bearing front casters for easy maneuverability and 10" diameter
rear wheels. Includes 10" x 1-1/2" crush resistant hose. Rear tank drain with
hose conveniently empties liquids without messy over spills. Push handle
doubles as a cord wrap. Grounded 25' long cord. Foam and cloth filters for
easy maintenance. Metal accessories include two-piece extension wand, floor
and wet nozzles. Uses Filters: 9-17910 Foam Filter, 9-17911 Cloth Filter
PartNo
CRAFT F9-17904
The perfect size for any big job, and lots of power to tackle almost any chore.
Insert the hose into the rear blowing port and the vac doubles as a blower,
perfect for quick clean-ups. Accessories include 7’x
2-1/2” Pos-I-Loc™ hose, 2 extension wands, car nozzle, utility nozzle, and
squeegee nozzle. 6.0 hp, 120.0 Volt, 11.0 amp. Uses Filters: 9-17816
Standard Filter, 9-17912 HEPA Filter
PartNo
CRAFT 9-17761
Description
VAC WETDRY 16GAL 5.75HP OLD# 9-17777
Wet/Dry Vac, 16 Gallon 6.5 HP - Deluxe
Description
VAC WETDRY 12GAL 8.5AMP
Deluxe integral dolly/tool basket system provides convenience and mobility.
The poly tank is dent resistant and the Roto-Lok™ hose connection keeps
hose from detaching from vac. Compact low profile design increases stability
and vac is easy to use and store. Includes collection filter bag and side carry
handles. Electronic liquid shut-off shuts off vac/pump to prevent overflow and
protect motor. Accessories include 7’x2-1/2” Pos-I-Loc™ hose, 2 extension
Features quiet operation that results in comfortable use at minimal noise level wands, blower nozzle, car nozzle, crevice tool, utility nozzle, and squeegee
and on board tool storage. Dual mode port converts easily from quiet vac to a nozzle. Uses Filters: 9-17884 Standard Filter, 9-17886 HEPA Filter
powerful blower. Accessories include 7’x2-1/2” Roto-Lok™ hose, 2
PartNo
Description
extension wands, floor brush, blower nozzle, car nozzle, utility nozzle, and
CRAFT 9-17923
VAC WETDRY 16GAL 6.5HP
squeegee nozzle.
Uses Filters: 9-17884 Standard Filter, 9-17886 HEPA Filter
PartNo
CRAFT 9-17922
Wet/Dry Vac, 16 Gallon 6.5 HP - Low-profile
Description
VAC WETDRY 12GAL 5HP
Wet/Dry Vac Industrial, 16 Gallon 4.0 HP,
2-Stage Motor
12 ft x 1-1/2” crushproof hose with positive lock hose system, HEPA
cartridge filter and collection filter bags. Includes dual storage basket. 2
chrome extension wands, brush, rug and squeegee nozzles. 11.5 amp, 4hp,
107 CFM.Uses Filter: 9-17842 HEPA Filter, Uses Bag: 9-17845 HEPA Bag
PartNo
CRAFT F9-17050
Description
VAC WETDRY 16GAL 4HP PRO
Phone: 402-455-6151
Toll Free: 800-488-9699
490
Low-profile wet/dry vac features an easily released detachable blower with a
265 mph blowing velocity. Compact oval drum design lowers the height and
makes the vac incredibly stable. Accessories include 7’x2-1/2” Pos-I-Loc™
hose, 2 extension wands, adapter, muffler, brush, blower nozzle, car nozzle,
crevice tool, utility nozzle, squeegee nozzle.Uses Filters: 9-17816 Standard
Filter, 9-17912 HEPA Filter
PartNo
CRAFT 9-17037
Description
VAC WETDRY 16GAL 6.25HP 17025 REPL BY 17037
Maintenance Tools
Maintenance
Wet/Dry Vac, Gallon 2.5 HP
Wet/Dry Vac 18 Gallon
PartNo
CRAFT F9-17934
PartNo
CRAFT 9-17935
Description
Description
VAC WETDRY 18GAL 9AMP
Wet/Dry Vac, 2 Gallon Portable Style, 1.5 HP
Powerful and compact. Oversize tank drain prevents clogging. Converts to
blower. Double insulated. Accessories include 7’x 2-1/2” Roto-Lok™ hose, 2
extension wands, and utility nozzle. Uses Filter: 9-17884 Standard Filter
PartNo
CRAFT 9-17937
Description
Cloth Replacement Filter
For following wet-dry vacs: 9-17904, 9-17934
A portable vac fitted with a carrying handle, this lightweight vac cleans all
manner of mess anywhere you take it. Doubles as a blower to quickly clean
debris in hard-to-reach places. Accessories include 4’x1-1/4” hose, and utility
nozzle. Uses Filter: 9-16949 Standard Filter
PartNo
CRAFT 9-17713
PartNo
CRAFT 9-17911
Description
FLTR CLTH VAC WETDRY MET DR
Collection Filter Bag/High Efficiency 2 pk.
Description
For following wet-dry vacs: 9-17920, 9-17921, 9-17935, 9-17937
PartNo
CRAFT 9-17892
The perfect size for your biggest jobs, and lots of power to tackle almost any
chore. Insert the hose into the rear blowing port and the vac doubles as a
blower, perfect for quick clean-ups. Accessories include 7’x2-1/2” Pos-ILoc™ hose, 2 extension wands, muffler, crevice tool, car nozzle, utility
nozzle, and squeegee nozzle. 6.5 hp, 120.0 Volt, 11.1 amp. Uses Filters: 917816 Standard Filter, 9-17912 HEPA Filter
PartNo
CRAFT 9-17762
Description
VAC WETDRY 16GAL 6HP
Phone: 402-455-6151
Toll Free: 800-488-9699
Foam Replacement Filter
PartNo
CRAFT 9-17910
Description
FLTR FOAM VAC WETDRY MET DR
Hepa Cartridge Filter
For following wet-dry vacs: 9-17920, 9-17921, 9-17922, 9-17923, 9-17929, 917935, 9-17937
PartNo
CRAFT 9-17886
491
Description
BAG VAC WETDRY 6-8GAL 2PK
Description
FLTR VAC WETDRY HEPA
Craftsman Tools
Industrial-strength vacuum features 9-amp, dual-stage motor that’s 50%
quieter than standard Craftsman wet/dry vacs. Hard metal drum with durable
metal vac cart. Chrome-plated cart includes front casters and 10" diameter
ball-bearing rear wheels. Includes 10' x 1-1/2" crush-resistant hose. Rear tank
drain with hose conveniently empties liquids without messy over spills. Push
handle doubles as a cord wrap. Grounded 35' long cord. Foam and cloth filters
for easy maintenance. Metal accessories include two-piece extension wand,
floor, wet and carpet nozzles. Uses Filters: 9-17910 Foam Filter, 9-17911
Cloth Filter
Quiet operation in vacuum and blower modes. Compact design is great for
quick pick-ups. Accessories include 7’x2-1/2” Roto-Lok™ hose, 2 extension
wands, and utility nozzle. Uses Filter: 9-17884 Standard Filter
Maintenance
Tools
Maintenance
Reusable Pleated Paper Filter
Craftsman Tools
Hepa Filter
For following wet-dry vacs: Fits 8, 12, 16 gallfon vacs sold since 1985, and 6
gallon vac models: 9-17712, 9-17743, 9-17744, 9-17746, 9-17781, Color: Red
DOES NOT FIT: 9-17920, 9-17921, 9-17922
Hepa filter material is 99.97% efficient at removing particles as small as 0.3
microns from the air passing through it. Washable and reusable.
For following wet-dry vacs: 9-17037, 9-17761, 9-17762, 9-17816.
PartNo
CRAFT 9-17912
Description
FLTR HEPA VAC DRY REUSEABLE
PartNo
CRAFT 9-17804
CRAFT 9-17809
CRAFT 9-17810
CRAFT 9-17812
CRAFT 9-17816
Vac Filter
For following wet-dry vacs: 9-17713
PartNo
CRAFT 9-16949
High Efficiency Filters, 5 pk.
Description
FLTR VAC WETDRY GRN BND
FLTR VAC WETDRY ORNG BND
FLTR VAC WETDRY PURP BND
FLTR VAC WETDRY BLUE BND
FLTR VAC WETDRY RED BND
Description
FLTR VAC WETDRY
Wet/Dry Vac, 5.0 HP
PartNo
CRAFT 9-17845
Description
VAC BAG 5PK
Hands-free vac center goes wherever you want. Wall-mount bracket, 18’x11/4” hose, 12” deluxe floor nozzle with squeegee insert, dust brush, crevice
tool/holder, car tool, cartridge filter. Uses Filter: 9-17909 Standard Filter
Replacement Cartridge Filter
PartNo
CRAFT 9-17775
For following wet-dry vacs: 9-17775
PartNo
CRAFT 9-17909
Description
VAC WETDRY WALL 5HP
Hoses/Nozzles/Misc.
Wet/Dry Vac Industrial Quality Accessory Kit
1-1/2"
Description
FLTR VAC WETDRY WALL CRTRG
Reusable Hepa Cartridge Filter
For following wet-dry vacs: 9-17050, 9-17051, 9-17924
PartNo
CRAFT 9-17842
Description
FLTR VAC WETDRY HEPA 16/32
Reusable Pleated Filter
For following wet-dry vacs: 9-17920, 9-17921, 9-17922, 9-17923, 9-17929, 917935, 9-17937
PartNo
CRAFT 9-17884
Description
FLTR VAC WETDRY REUSEABLE
Phone: 402-455-6151
Toll Free: 800-488-9699
492
Includes 2-piece metal extension wand; 10-ft., 1-1/2" diam. plastic hose with
metal carpet nozzle and adapters fit 1-1/2" accessories.
PartNo
CRAFT 9-16911
Description
ACC VAC WETDRY 4PC 1-1/2HS
Maintenance
Tools
Maintenance
Wet/Dry Vac Round Nozzle 1-1/2"
Hoses/Nozzles/Misc.
Wet/Dry Vac 1-1/2" 10-Foot Hose
For use with all of our wet/dry vacs with 1-1/2" diam. hose. Must purchase 916909 ext. hose with adapters to use metal attachments with 2-1/2" diameter
hose vacs. With adapters.
PartNo
CRAFT 9-16909
PartNo
CRAFT 9-16905
Description
RND BRSH VAC WETDRY 1-1/2HS
Wet/Dry Vac Carpet Nozzle 1-1/2"
Description
HOSE VAC WETDRY 1-1/2X10FT
Wet/Dry Vac 1-1/2" 2 Pc. Extensions Handle
hose vacs. Metal construction.
PartNo
CRAFT 9-16908
Description
CRPT NZL VAC WETDRY 1-1/2HS
Wet/Dry Vac Wet Nozzle 1-1/2"
For use with all of our wet/dry vacs with 1-1/2" diam. hose. Must purchase 916909 ext. hose with adapters to use metal attachments with 2-1/2" diameter For use with all of our wet/dry vacs with 1-1/2" diam. hose. Must purchase 9hose vacs. Metal construction. 48".
16909 ext. hose with adapters to use metal attachments with 2-1/2" diameter
PartNo
Description
CRAFT 9-16903
HDL EXTN VAC WETDRY 48IN 2P
PartNo
CRAFT 9-16907
Wet/Dry Vac Floor Nozzle 1-1/2"
Description
WET NZL VAC WETDRY 1-1/2HS
Wet/Dry Vac Accessory Kit 2-1/2"
PartNo
CRAFT 9-16906
Description
FLR NZL VAC WETDRY 1-1/2HS
Includes: 9-16902 Crevice Tool 2-1/2" diam., 9-16901 Dusting Brush 2-1/2"
diam., 9-16925 Dry Nozzle 2-1/2" diam., 9-17817 Wet Nozzle 2-1/2" diam.
and 9-16901 2 Pc. Ext. Wand 2-1/2" diam.
Wet/Dry Vac Crevice Nozzle 1-1/2"
PartNo
CRAFT 9-16919
Description
Wet/Dry Vac Accessory Kit 1-1/4"
For use with all of our wet/dry vacs with 1-1/2" diam. hose. Must purchase 9- Includes: 9-17863 Crevice Tool 1-1/4" diam., 9-17862 Dusting Brush 1-1/4"
16909 ext. hose with adapters to use metal attachments with 2-1/2" diameter diam., 9-16944 Wet/Dry Nozzle 1-1/4" diam. and 9-17861 2 Pc. Ext. Wand 11/4" diam.
PartNo
CRAFT 9-16904
Description
CRVC TL VAC WETDRY 1-1/2HS
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-17869
493
Description
Craftsman Tools
Maintenance
Tools
Maintenance
Wet/Dry Vac 2 Pc. Ext. Wand
Hoses/Nozzles/Misc.
Pos-I-Lock Replacement Hoses
Craftsman Tools
Heavy-duty plastic.
PartNo
CRAFT 9-16964
CRAFT 9-17861
Description
WAND VAC WETDRY 2PC 2-1/2HS
WAND VAC WETDRY 2PC 1-1/4HS
Wet/Dry Vac Blower Nozzle -1/2"
Hose swivels 360^ and snaps into vacuuming port so it won't pull loose. For
vacs with locking port or adapter. Includes double swivel hose and
interlocking hose end.
PartNo
CRAFT 9-17800
CRAFT 9-17814
CRAFT 9-17822
Description
HOSE POSI VAC WETDRY 13-1/2
HOSE POS-I VAC WETDRY 20
HOSE POS-I VAC WETDRY 7FT
Heavy-duty plastic.
PartNo
CRAFT 9-16933
Description
BLOW NZL VAC WETDRY 2-1/2HS
Wet/Dry Vac Hose Grip 2-1/2"
Roto-Lok Replacement Hose
Heavy-duty plastic.
PartNo
CRAFT 9-16934
Description
HOSE GRP VAC WETDRY 2-1/2HS
Wet/Dry Vac Crevice Tool
2-1/2" x 7'. Use with 9-17920, 9-17921 and 9-17922 vacs only.
PartNo
CRAFT 9-17824
Heavy-duty plastic.
Description
HOSE ROTO VAC WETDRY
PartNo
CRAFT 9-16902
CRAFT 9-17863
Description
Wet/Dry Vac Car Nozzle
Wet/Dry Vac Plastic Hoses
Heavy-duty plastic.
PartNo
CRAFT 9-16978
CRAFT 9-17868
Description
CAR NZL VAC WETDRY 2-1/2HS
CAR NZL VAC WETDRY 1-1/4HS
Wet/Dry Vac Nozzles
PartNo
CRAFT 9-17820
CRAFT 9-17821
CRAFT 9-17829
CRAFT 9-17866
Heavy-duty plastic.
Description
HOSE EXTN VAC WETDRY 7FT
HOSE EXTN VAC WETDRY 20FT
HOSE EXTN VAC WETDRY
HOSE VAC WETDRY 1-1/4X6FT
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 9-16925
CRAFT 9-16944
CRAFT 9-17817
494
Description
DRY NZL VAC WETDRY 2-1/2HS
NZL VAC WETDRY 1-1/4HOSE
WET NZL POS-I VAC WETDRY
Maintenance
Tools
Maintenance
Disposable Drum Liners for 16 Gallon Vacs
Hoses/Nozzles/Misc.
Wet/Dry Vac Utility Nozzle
Does not fit low-profile oval drum vacs. Package of 5.
PartNo
CRAFT 9-16940
Adapter
Description
DRUM LNR DISPOSABLE 16GAL
Couples two 2-1/2" dia. hoses.
Description
CONN KIT VAC WETDRY 2-1/2HS
Drain to Hose Adapter
Heavy-duty plastic.
PartNo
CRAFT 9-16921
CRAFT 9-16922
Description
UTIL NZL VAC WETDRY 1-1/4HS
UTIL NZL VAC WETDRY 2-1/2HS
Floor Brush 14"
Attach to vac and screw on a garden hose (not included) to drain liquid
instead of hauling the vac to a drainage area. Works on any Craftsman vac
with a drain plug.
PartNo
CRAFT 9-16992
Description
HOSE TO DRAIN ADAPT
CRAFT 9-16990
CASTER FEET VAC WETDRY
Quickly clean large work areas. Design features 5/8" bristles on one side and Storage Caster Feet
3/8" bristles on the other, so it will not push debris aside before it's picked up. Keeps accessories with vac. Set of 2 fits all current Craftsman wet/dry vacs
Bristle brushes rotate 180^ to pick-up on both the pull or push stroke. Use
except 9-17920, 9-17921 and 9-17922. Uses vacs existing casters.
PartNo
Description
with 2-1/2" diame
PartNo
CRAFT 9-16926
Description
FLR BRSH VAC WETDRY 2-1/2HS
Casters
Wet/Dry Vac Dusting Brush
Heavy-duty plastic.
PartNo
CRAFT 9-16901
CRAFT 9-17862
May be used with any Craftsman vac except 9-17920, 9-17921 and 9-17922.
Set of four snaps into bottom of drum.
Description
DUST BRSH VAC WETDRY
DUST BRSH VAC WETDRY
PartNo
CRAFT 9-16936
Pos-I-Lock Adapter
Clamps
Description
SET CASTER VAC WETDRY 4PC
Clamps/Clamp Sets
Clamp 3-Way Edging
Hosw swivels 360^ and snaps into vacuuming port so it won't pull loose.
Modifies current vacs to accept a Pos-I-Lock replacement hose. Fits
Craftsman vacs with 2-1/2" diameter hose inlet.
PartNo
CRAFT 9-17823
Description
ADAPT POS-I VAC WETDRY
Muffler/Diffuser 2-1/2"
Uses 3 screws to clamp the edge on counter tops and more. 2-1/2" opening,
throat.
Connect to 2-1/2" blowing port. Reduces noise up to 25%.
PartNo
CRAFT 9-16993
PartNo
CRAFT 9-66776
Description
VAC WETDRY MUFFLER 2.5HSE
Phone: 402-455-6151
Toll Free: 800-488-9699
495
Description
CLMP C 3 WAY EDG
Craftsman Tools
PartNo
CRAFT 9-16917
Maintenance
Maintenance Tools
Ratchet Clamp Set 2 Pc. 8" Diamond Metal
Craftsman Tools
Clamps
Clamps/Clamp Sets
C Clamps
2-1/4" jaw capacity. Includes two sets of interchangeable jaws and two
locking pins. Metal V-notch jaws. Soft rubber pads snap over metal jaws.
PartNo
CRAFT 9-31691
Ductile iron frame, plated steel screw, sliding pin, handle. Max. Cap. 1" & 2"
come in package of 2.
PartNo
CRAFT 9-51761
CRAFT 9-51762
CRAFT 9-66723
CRAFT 9-66724
CRAFT 9-66725
CRAFT 9-66726
CRAFT 9-66728
Description
SET CLMP DIA MET RAT 2PC 8
Clamp Set 2 Pc.
Description
CLMP C DCTL IRON 1
CLMP C DCTL IRON 2
CLMP C DCTL IRON 3
CLMP C DCTL IRON 4
CLMP C DCTL IRON 5
CLMP C DCTL IRON 6
CLMP C DCTL IRON 8
C Clamp Set 6 Pc.
Steel ratcheting mechanism, resin body, v-groove jaws. Squeeze to ratchet,
press button to release. 2-1/2" jaw openings.
PartNo
CRAFT 9-31591
Description
SET CLMP RAT-JAM 2PC
Clamp Set 4 Pc.
Features light duty, deep reach ductile frames; plated steel screws, handles
and swivels. Includes two each 1" x 3", 2" x 3-1/2" and 3" x 4-1/2" sizes.
PartNo
CRAFT 9-66752
Description
SET CLMP C 6PC
PartNo
CRAFT 9-31592
Needle Nose Ratchet Clamp
Description
CLMP NDL NOSE RAT 9
Phone: 402-455-6151
Toll Free: 800-488-9699
Description
SET CLMP RAT-JAM 4PC
Clamp Set 4 Pc. E-Z Hold Bar
Metal construction with soft overmold handle grips. 2-1/4" jaw capacity.
Quick release button. Removable padded tips. 9" long.
PartNo
CRAFT 9-31692
2 each 1" jaw openings, 2 each 1-1/2" jaw openings.
Durable clamps for quick, easy one-hand clamping. All steel and iron
construction for maximum clamping pressure. Wood handles. Includes 2 each
12", 18" clamps.
PartNo
CRAFT 9-31472
496
Description
SET CLMP EZ HOLD BAR 4PC
Maintenance Tools
Maintenance
Bar Clamp 12" w/3-1/2" Throat Depth
Clamps
Clamps/Clamp Sets
Clamp Set 8 Pc.
PartNo
CRAFT 9-31484
Description
CLMP/SPRDR BAR 12 IN
Bar Clamp 18"
Includes two each: 1" spring clamps; 3/4" sintered iron pipe clamps; 3"
ductile iron "C" clamps and 4" "C" clamps.
PartNo
CRAFT 9-31580
Description
SET ASST CLMP 8PC
Bar Clamps
Throat depth: 3-1/2". Clamp max: 18". Spread max: 26". Sprea
PartNo
CRAFT 9-31485
Description
CLMP/SPRDR BAR 18IN
Bar Clamp 24" (not shown) similar to 18"
PartNo
CRAFT 9-31486
Description
CLMP/SPRDR BAR 24IN
Forward/reverse action handle levers provide complete clamping with one
hand. Reverse lever to loosen jaws in small increments. Quick release,
reversible jaw easily converts clamp to a spreader. Throat depth: 2-1/2".
Clamp max: 6". Spread max: 12". Spread
PartNo
CRAFT 9-31481
Description
CLMP/SPRDR BAR 6IN MINI
Clamp max: 6". Spread max: 14". Spread
Description
CLMP/SPRDR BAR 6IN
PartNo
CRAFT 9-31489
Description
CLMP/SPRDR BAR 33IN DP
Size: 2D. Super bright pre-focused krypton bulb. Polycarbonate lens and
reflectors. Resin body is waterproof and shock resistant. LED indicator shows
battery power. Spare bulb in tail cap. Batteries not included. Yellow color.
Description
FLSHLT KRYP BULB 2D
Tool Lights 3D Industrial Quality
Clamp max: 12". Spread max: 18". Sprea
Size: 3D. Super bright pre-focused krypton bulb. Polycarbonate lens and
PartNo
CRAFT 34-93105
Description
CLMP/SPRDR BAR 12IN MINI
Phone: 402-455-6151
Toll Free: 800-488-9699
PartNo
CRAFT 34-93104
PartNo
CRAFT 9-31482
Description
CLMP/SPRDR BAR 36IN
Lighting
Tool Lights & Flashlights
Tool Lights 2D Industrial Quality
PartNo
CRAFT 9-31483
PartNo
CRAFT 9-31487
497
Description
FLSHLT KRYP BULB 3D
Craftsman Tools
Clamp max: 12". Spread max: 20". Sprea
Maintenance Tools
Maintenance
Lanterns
Industrial Quality 6-Volt Lantern
Craftsman Tools
Lighting
Tool Lights & Flashlights
Tool Lights 4AA Industrial Quality
Size: 4AA. Super bright pre-focused krypton bulb. Polycarbonate lens and
Super bright pre-focused krypton bulb. Polycarbonate lens and reflector.
ABS. Plastic body is waterproof. 5 position adjustable stand. Led indicator
PartNo
Description
shows battery power. Spare bulb and 4D battery adapter included. Battery not
CRAFT 34-93108
FLSHLT KRYP BULB 4A
included. Yellow color.
Flashlight 3D
PartNo
CRAFT 34-93107
Description
LNTRN 6VOTL KRYPT YLW
Rechargeable Lanterns
Super bright Xenon light with spare bulb and metal hang ring focuses spot to
flood with ease. Waterproof/submersible, with a sealed on/off switch and
shatterproof. Polycarbonate lens.
PartNo
CRAFT 34-93663
Description
FLSHLT ALUM ADJ BEAM 3D GLD
Flashlight 2D
Halogen sealed beam. ABS plastic construction. Solid state components.
Lasts up to 4 hours on a charge. Built in power indicator. Includes charger
with 6' cord.
PartNo
CRAFT 34-93662
PartNo
CRAFT 34-93202
Description
LNTRN RECHARG HALO ORNG
Worklights
Fluorescent Cord Reel Worklight
Description
FLSHLT ALUM ADJ BEAM 2D BLK
Flashlight 2AA
PartNo
CRAFT 34-93661
PartNo
CRAFT 34-83912
Description
FLSHLT ALUM ADJ BEAM 2A BLK
Phone: 402-455-6151
Toll Free: 800-488-9699
Pistol grip handle with grounded outlet in end. Magnet. Vinyl tube holds and
protects bulb. Transformer is inside handle. Black epoxy reel and cord, red
handle. UL listed. 25 ft., 16 gauge 3-wire cord.
498
Description
WKLGT FLRCNT 25CRD MAG REEL
Maintenance
Tools
Maintenance
Lighting
Worklights
Fluorescent Worklight w/Rubber Cushioned
Handle
Halogen Worklight
PartNo
CRAFT 34-83895
Dual two-way switches. Two 13-watt bulbs. Rubber cushioned handle
contains a grounded outlet and a built-in transformer. 2 hanging hooks and a
detachable magnet. 25' 16 ga. 3-wire cord.
PartNo
CRAFT 34-83893
Description
WKLGT FLRCNT 2BLB 13WAT 25
Fluorescent Worklight w/Pistol Grip Handle
Description
WKLGT HALGN
Replacement Bulbs
Replacement Bulbs
PartNo
CRAFT 34-93199
CRAFT 34-93840
CRAFT 34-93841
CRAFT 34-93843
CRAFT 34-93855
CRAFT 34-93861
Description
BULB LNTRN REPL
BULB FLSHLT 2D
BULB FLSHLT 3D
BULB FLSHLT 4A
BULB FLSHLT TWIN TUBE
BULB FLSHLT 2AA
Battery
Replacement Battery
For 34-93197, 34-93271 & 34-93272. Battery not Craftsman branded.
Pistol grip handle with grounded outlet in end. Magnet. Vinyl tube holds and
protects bulb. Transformer is inside handle. Red handle, black cord. UL listed
25 ft., 16 gauge 3-wire cord.
PartNo
CRAFT 34-83911
Description
BATT LNTRN RECHARG REPL
Description
WKLGT FLRCNT 25CRD MAG
PL-Bulb Fluorescent Cord Reel Worklight
Transformer in plug end, 3rd prong for stability. Pistol grip handle. Light
shines down on work area, also out the end. Short 13-watt PL-bulb burns
cool. Vinyl tube protects bulb and user. 20' 18 Ga. 2 wire cord. Cord pulls out
of reel and locks, automati
PartNo
CRAFT 34-83892
PartNo
CRAFT 34-93200
Description
WKLGT PL-BLB 13WAT 20CRD RL
Phone: 402-455-6151
Toll Free: 800-488-9699
499
Trade Tools
All the
Automotive,
Plumbing and
Electrical Tools
You Need to Get
the Job Done.
Craftsman Tools
Lights area like a flood light. Faceted reflector. Head pivots 90^. Magnet.
Vented hood helps keep tungsten lamp cool. Clear bulb guard. On/off rocker
switch in handle. 20-watt MR-16C tungsten halogen bulb. 25' 18 Ga. 2 wire
cord, SJT type. UL and C-UL li

Craftsman Tools - John Day Company

Transcription

Similar documents

Section 4 Hand Tools Pages 163-192

Intel Yonah CPU ICH7-M SB Ext. VGA BD1

Статистика посещения для всего сайта целиком за 2015 год

Power Tools - John Day Company

Fasteners |fournitures