Clear Vu Brochure

CO CEPT CLearVu has been engineered as a security barrier which disappears into it's surroundings. The high density, high tensile mesh incLudes apertures too narrow for finger and foothoLds, preventing climbing or cutting with standard tooLs, boLt cutters etc. . F
CE TOP INGS
VARIOUS SPIKES (SHARK TOOTH
SHOWN HERE) ARE A POPULAR
AND NEAT FENCE TOPPING
PECIFICATIONS Drawing A - General Arrangement
TOPPING OPTION 4,1 (Razor
_
Me~h)
DETAIL B
1
1.0 POSTS
• See table
• Post to be fitted with end caps + 250mm, 30 X 3mm angle base
sections (or equivalent)
TOPPING OPTION 4 2 (SpIkes)
DETAil A
225 mn
CD--!-
•
2.0 F OUNDATIONS
·600 deep X 400 square 15Mpa concrete
CtE.:. RIJU
PStEor.C, FO HIGH Dftl ~1l (
3.0 CLEARVU PRESSED HIGH DENSITY MESH PANEL
3.1 Mesh Dimensions:
,',', [ SH PAllEI-
R[ INfORc urG Fl IB·
150 m nl
3.1.1 Standard option - 4 mm dia high tensile wires - Aperture sizes: 76,2 x 12,7mm (3in x 0,5in) Centres DETAIL B
3.1.2 Alternative option
- As per 3.1.1 above but 3mm dia horizontal wires and 4mm dia
vertical wires
lS0 ~
100 mfT
(' PTI OtIA!. CONCRETE- 'illrl. 20D mm WIDe: X 200 m rn DEEr
CO IKRtTE 15Mpa .
2915 mm
3.2 Mesh Coatings: - Option 1 line galvanised (standard option) - Option 2: Line galvanised with aJu-galv coating (for extra corrosion protection)
- Option 3: Line galvanised wfth deep etch primer and epoxy
enamel finish coat
- Option 4: Line galvanised with polymetic BOOO coating
(for highly corrosive coastal areas)
•
E
§
- - - -- -- -o! 1+'0I"M:..;'(,-'_ _
3.3 Mesh Panel Design: Panel to be pressed into reinforced profile
as per DRG B
4.0 TOPPING OPTIONS
• A variety of anti-climb structures may be installed to the mesh top,
such as:
TAPER POST
OPTION
FENCE
DESIGNATION
MESH WIRE
DIA
4/3
1800
2100
2400
2400
"------3000
4 1)
3
4
4/J
DIM 'A'
DIM 'B'
1800
2100
2400
2400
3000
2400
2700
3000
3000
3600
4 1 Razor mesh panels 600 mm high with 150 x 300mm apertures,
fixed to 50 x 50mm ClearVu mesh angle beam along fence top.
POST SIZE - DIM 'C'
4.2 1OOmm high galvanized 'shark tooth' type spike rails,
bolted to 50mm wide ClearVu mesh fiange bent along fence top.
TAPER. 85 - 45 mm
DEPTH' 85 mm
fY..Q.J&.;. Specifications are subject to change therefore must be confirmed
at time of purchase.
Drawing B - Pressed Panel DETAIL B
SINGLE BOLT
CLAM PING PLATE
76
MESH TOP EITHER BENT 90' FLANGE OR "CUT EDGE" 30 ' FINISH AT CUSTOMERS OPTION DETAILAO
'v'
BEND
p[
I
ItJfOFr C:u rc RIC. _
"r
90' BE ND
-SIDE FLANGE
{]
o
DETAIL B
5'ETTI OI '
DETAIL A
DOUBLE BOLT
CLAMPING PLATE
CLAMPING
FLATE
I"
SQTUB£
POST
166
fl............ CLAMPING PLATE TO SECURE MESH PANEL AGAINST POST USING ANTI-VANDAL BOLT HEADS DEALER:
COCHRANE
PRODUCTS
'I
COCHRANE TAMPER
PROOF TECH BOLT