Rexroth 4EE in Pneumatics – AF1 Series Flow Sensor

Rexroth 4EE in Pneumatics –
AF1 Series Flow Sensor
Compressed air
consumption/time
Avoid energy losses and save money
by continuously monitoring the air consumption
in your system
Greater energy efficiency with AF1
AF1 series flow sensors constantly compare the actual
values in a system with the set process values, allowing
Plug, 5-pin, M12x1
you to reliably control flow rates and detect larger leaks.
A high degree of overall cost control is provided through the
Activated
system lock
allocation of costs to specific products. The flow rates are
determined by the AF1 sensor module using the difference
Activated
sigma function
in pressure between the two internal measuring points and
then shown on the display. A number of options are available
Indicator for
switch outputs
for the display. The AF1 has two PNP/NPN switch outputs
and one analog output. Users can set switching points
Readings
for the two switch outputs on the basis of flow rate, air
consumption, or pressure. The analog output provides the
Measurement units
flow rate value.
Input pressure
ffPrecision demand-based compressed air supply
(stand-by mode)
ffCosts allocated to consumption source
ffCan be retrofitted into AS series maintenance units
Intuitive menu
AF1 series
Series
AF1
Measuring principle Differential pressure
Bosch Rexroth AG
Pneumatics
Ulmer Straße 4
D - 30880 Laatzen
Phone +49 511 2136-0
Fax
+49 511 2136-269
[email protected]
www.boschrexroth.com/pneumatics
R499050960/2011-09/EN © All rights reserved by Bosch Rexroth AG
Measuring ranges
150 to 2,000 l/min, 250 to 5,000 l/min
Operating pressure
Max. 16 bar
Precision
+/- 3% (at p = 7 bar, t = 23°C)
Electr. connection
M12x1 plug, 5-pin
Operating voltage
24 V
Switch output
2x PNP or 2x NPN, selectable
Analog output
0-10 V or 4-20 mA, fixed
Display
Display with three-button control
Readings
l/min, l/h, m³/h, gal/h, l, m³, bar