600 GPRC WIRELESS GATEWAY TRANSRECEIVER.cdr

Transcription

600 GPRC WIRELESS GATEWAY TRANSRECEIVER.cdr
Bulletin No. 1000W(GPRS)G
GPRS WIRELESS GATEWAY (TRANSRECEIVER)
I S O - 9 0 0 1 : 2 0 0 0 C E RT I F I E D
SERIES 600 TYPE 600 GPRC
w.e.f. Nov., 2012
- Remote management
Power
Supply
Wireless Transreceiver
600 GPRC
Visualize, monitor and control
GPRS Transreceiver
for industrial applications
INTRODUCTION:
Wireless Transreceiver(GPRS)-600GPRC belong to the family of series 600 and effectively
integrate, serial modbus devices to IP management system via EDGE or GPRC. It is a powerful
reliable tool for communication of modbus based field mounted Instruments. Many industrial
devices like PLC, I/O, Data Loggers etc. support RS485 modbus protocol. 600GPRC can
integrate 16 Nos. Data Transmitters 600AIO/600DIO OR It can also receive MODBUS Data
from 16 nos. instruments of Third Party or Combination.
Power
Supply
Computer
Wireless Transreceiver(GPRS)-600GPRC provide flexible solution for industrial application for
monitoring & control of process parameters. 600GPRC is designed to operate in harsh
environment and its enclosure is of aluminium alloy & suitable for weather proof, explosion proof
& dust proof applications. This consist of serial port for MODBUS Data. There is also provision
for inserting SIM Card in SIM Card Holder. This plug & play solution is easy to install in a short
time. FACILITY TO STORE DATA IN CASE OF FAILURE OF MOBILE NETWORK.
Transreceiver
600 GPRC(Field)
Power
Supply
The application of 600GPRC is to measure various process parameters like level, temperature,
pressure & flow etc & also electrical parameters like Voltage, Current, KW, KWh, frequency,
Power Factor KVA & KVAh.... Alternatively it can also receive serial MODBUS Data of
instruments from third party. There is also a provision to operate control valve, disconnector,
solenoid valve etc. from Computer. The analog data from process Instrument is converted toRemote Antenna
551
digital data which is connected to serial-port of wireless transreceiver(GPRS) 600 GPRC.
Digital Transmitter
600A10 / 600D10
APPROVAL & CERTIFICATION
Real on time monitoring, control & data acquisition has been functionally tested & approved by ERTL vide their
certificate No.14T0375 dt.29.9.2014.
ERTL is approved Laboratory of NABL (India), It has also got approval from Director General of Civil Aviation,
BIS, CBIP, DGS&D, IECQ, ICEE-CB, FCC(USA ) & SASO.
The hardware of wireless transreceiver 600GPRC used in real on time monitoring has got certificate of CE,
cULus, FCC/C PTCRB
SPECIFICATIONS
FEATURES
WIRELESS TRANSRECEIVER(GPRS)-600 GPRC
1) 600 GPRC is equipped with GPRS/EDGE enabled
SIM card.
2) Digital transmitter receives analog/digital signal from
process Instrument, convert to digital data and
communicate to serial-port.
3) Housing of Transreceiver 600GPRC, Digital Data
Transmitter 600AIO/600DIO & Remote Antenna 551
are weather proof & Dust Proof .
4) Remote antenna can be provided in locations where
network is weak.
5)
6)
7)
8)
1)
2)
3)
4)
5)
Input voltage
Power consumption
Temperature
Humidity
GSM / GPRS
:
:
:
:
:
6)
7)
8)
9)
Ethernet
Serial Port #1
Serial Port #2 Isolated
Response time
:
:
:
:
10) Minimum Internet Speed
:
11) Accuracy
:
12) Electrical connection
:
13) Electrical classification of
:
Housing type 600
Communication from analog digital Transmitter to 14) Electrical Classification Remote :
Transreceiver can be done by RS232 OR RS485
Antenna Type 550
15) Mounting
:
Port.
16)
Mechanical
Dimensions/Wt.
NO IT EXPERTISE REQUIRED. CAN BE
(Enclosure) : LXBXD / Kgs.
:
OPERATED BY UNTRAINED TECHNICIANS.
17) SMA qadband remote antenna :
?
NO FIREWALL AND VPN REQUIRED
18) Protocol
:
?
NO STATIC IP NEEDED
19) MODBUS Slave
:
?
NO PROGRAMMING REQUIRED
20) Baud Rate
:
?
NO PRIVATE SERVER REQUIRED
21) Certificate
:
?
NO SCADA SOFTWARE REQUIRED FOR
22) Digital Input (Integral)
:
GRAPHICAL REPRESENTATION
23) Digital Output (Integral)
:
?
NO DATA LOSS EVEN WHEN MOBILE
24) Analog Input (Integral)
:
NETWORK FAILS
25) Analog Output (Integral)
:
FACILITY TO STORE DATA IN CASE OF
26) Log Interval
:
FAILURE OF MOBILE NETWORK.
27) No. of alarm
:
28) Type of Alarm
:
GRAPHICAL, TABULAR PRESENTATION AND
29) Input Data Transmitter
:
TREND MONITORING ALONGWITH ALARM
MANAGEMENT.
30) MODBUS DATA
OR
:
9 – 24VDC
3W
- 20 to 550C
5 to 85% RH
Quad band GPRS Class
12 850/900/1800/1900MHz
10/100mbit/s+failover mode
RS232 upto 115.2 kbit/s
RS485 upto 115.2 kbit/s
1 – 60 seconds depending upon
network speed
256 kbps (Higher speed - Less
comm. time)
Less than ± 0.5%.
½” NPT (dual cable entry)
Weather proof & Dust Proof.
Weather proof I& Dust Proof.
Wall / 2" Pipe
216X170X150MM / 4.5 Kgs.
Optional with 5 m cable and
Magnetic Foot.
MODBUS - RTU, ASCII
16
300 - 1,15,200 Bauds
CE, cULus, FCC/C PTCRB
2DI (On/Off)
1 Relay (Max. 30VDC/1A)
2AI(PT100, 0-10V, 0-20mA)
1AO (0-10V)
30 Sec. to 60 Minutes.
16
Email / SMS
16 nos. 600AIO (4 nos. Analog
Input (4-20mA and 2 nos. Output
(4-20mA); OR
600DIO (7 nos. Digital Input and 7
nos. Digital output.
16 Nos. Third Party Instruments
(Combination possible)
Details of Digital Data Transmitters
A)Analog digital data transmitter Model 600AIO
Input
1) 4-20mA
2) 0-100mV/0-50mV
3) RTD(PT 100)
Output:
1) 4-20mA
B) Discrete Digital (ON/OFF) data transmitter
Model 600DIO
Input : 7 Nos DI (Digital Input)
Output : 7 Nos. DO with 1 Amp rating 30VDC/230VAC
C) Digital Data Transmitter for Electrical parameters
600 EI : To measure V, I, Frequency, PF, KW, KWh....
2) 4-20mA
600 GPRC Transreceiver to Visualize, Monitor & Control
There is a greater need today to streamline, cut costs, improve
effciency and become more environmentally friendly than ever
before. Efficient remote management of installations, machines
and Process equipment is a way to meet these demands.
Few examples
Monitoring & Management of Process
Parameters
1. Monitoring of Level, Temperature, Flow, and
Pressure...... in Graphical, Tabular, and Trend forms.
2. Remote Operation of Control Valve and Solenoid
Valve......
3. Minimize on-site service
4. Instant access to equipment status.
5. Minimize on-site service
6. Instant access to equipment status.
PUMP MANAGEMENT
1.
2.
3.
4.
5.
6.
Monitoring of Pump Operation
Alarms for overload, dry running....
Quantity of flow of Water
Notify Service Engineer when operation interrupt.
Minimize on-site service
Instant access to eqipment status.
POWER GENERATOR MANAGEMENT
1.
2.
3.
4.
Monitoring of health & Readiness of Generator
Excess of Fuel Level, Oil Presure, Battery Voltage.....
Remote Start/Stop of Generator
Monitoring of Energy Parameters like V, I, Frequency,
PF, KW, Kwh.....
5. Notify Service Engineer when operation interrupt.
6. Minimize on-site service
7. Instant access to eqipment status.
600 GPRC TRANSRECEIVER INDUSTRIAL NETWORK
Industrial Networks provides reliable solutions to connect various devices to
any NetWork for Visualisation, Monitoring and Controlling.
Data Transmitter
Digital
Power
Supply
Solenoid
Valve
Computer
with Internet
Facility
GPRS
Power
Supply
Generator
600 GPRC
Transreceiver
with GPRS Sim
PUMP
Data Transmitter
Analog
Data Transmitter
Energy
Power
Supply
MODBUS DATA
(Third Party)
V. AUTOMAT & INSTRUMENTS (P) LTD.
AUTOMAT HOUSE, F-61, Okhla Industrial Area, Phase-I, New Delhi - 110 020, INDIA
Phone : 47627200 (40 Lines) Fax : 091-11-26819440
E-mail: [email protected]; [email protected]
Website : www.vautomat.com
BRANCHES IN BARODA, MUMBAI, KOLKATA, JAMSHEDPUR, SECUNDERABAD & CHENNAI
See Website for address (Specifications can change without prior notice)
APPLICATIONS