Brink 2020/2050 - Blankestijn Beveiliging

Brink 2020/2050
a D V i E S
|
m o n t a g E
|
S E r V i c E
|
o n D E r h o U D
Electromechanical Deadlocking Bolt
Solenoid actuated operation to lock (Fail-safe) or to
frame mounting. Available with a 3/4” or 1” throw
unlock (Fail-secure) a door. Designed for hollow metal
stainless steel bolt.
Application
• The 2020/2050 series is ideal as an auxiliary or
• The 2020 has a 3/4” throw stainless steel bolt
override lock for access control in secure areas of
and narrow lock depth allowing mortise mounting
commercial, governmental, industrial, and
in a standard (i.e. 2” trim) hollow metal door frame
institutional buildings.
or an architectural metal tube (e.g. borrowed light
• Available in “Fail-safe” (FS) (i.e. power to lock) or “Fail-
frame mullion). The 2050 has a 1” throw stainless
secure” (FSE) (i.e power to unlock) modes.
steel bolt and, therefore, is deeper than the 2020.
• The “Fail-safe” version is commonly used (with
(see dimensions on the back).
fire marshal approval) to secure an emergency
• Installation of the 2020/2050 series is
exit required to have a panic exit device. For safety,
architecturally unobtrusive and affords superior
the 2020/2050 is connected to the building’s fire
impact and tamper resistance.
detection system to effect automatic unlocking
during an emergency. Also, a power failure would
Note: Unlocking of the “Fail-safe” and “Fail-secure”
initiate unlocking.
2020/2050 is by spring return and solenoid, respectively.
A side force on the bolt will overcome these actions and
prevent bolt retraction. Therefore, for proper operation, the
bolt must be free of side loads.
Solenoid actuated operation to lock (Failsafe) or to
mount in a standard hollow metal frame (i.e. 2” trim).
unlock (Fail-secure) a door. Models 2020 or 2050
Standard Features
• Structural and locking parts are stainless steel
• The stainless steel auxiliary (trigger) latch actuates
• Non-working parts and fasteners of copper alloy or
a switch which, when the door is open, serves to
stainless steel
hold the bolt retracted and preclude door closure on
• 3/4” throw (2020) or 1” throw (2050) cast
an extended bolt.
stainless steel bolt with two (2) saw resistant inserts
• Mechanical operation via customer supplied
• Maintained Switch Latch Holdback (MSLH) function standard commercial key cylinder with “Yale” type
(see “Motor Lock Function Reference Guide” for
cam. (Factory supplied key cylinder optional.) For
other functions).
two sided, frame keying see optional “key cylinder
• Lock status switch (LSS) trips when latch is in
extension” (KCE).
deadlocked condition. Used in a signal circuit to
• Plug connectors are provided for ease in wiring and
indicate lock status – unlocked or deadlocked – via
removal.
control panel lights and/or alarm devices. The LSS
• 24VDC cylindrical type constant duty solenoid with
is also used to control an electrical interlock, which
double wound coil – “Fail secure” (FSE) pull type and
permits only one of a group of doors to be
“Fail safe” push type (FS).
unlocked at any time. Note: For positive, tamper
• Exposed fasteners – pinned “Torx” head
resistant signaling of a closed and deadlocked
• Exposed Faceplate Metals/ Finishes
door, a sensitive door position (DPS) switch must be
Satin Stainless Steel (ANSI 630, US32D)
wired in combination with the LSS. Our DPS Models
Satin Brass (ANSI 606, US4)
201030 or 201090 are recommended.
Brink 2020/2050
2
1.500" (2020)
1.630" (2050)
1.625" (2020)
1.875" (2050)
.187"
12-24 Screw, (2)
Electrical Data
• Solenoid – Dual coil, continuous duty – 24VDC;
1.4 amp in-rush, 0.3 amp seated
• EURO – Lock is adapted for key operation with
• Lock Status Switch – 120/250VAC, 5 amp,
an Europrofile cylinder – available with 25mm or
.125"
SPDT (Form C)
4.000" (2020)
4.250" (2050)
cam cylinders.
45mm backset.
• Bolt Hold Back Switch – 120/250VAC, 10 amp,
SPDT (Form C)
Frame Opening
9.510" (2020)
9.885" (2050)
• MLH – Mechanical latch holdback by key – latch
remains retracted with key removed – available with
12-24 T ap, (4)
single side keying and FSE mode only – not available
optional Features
with EURO or 2050.
• FKC – Factory supplied high security key cylinder
• RC – Rectifier with plug-in adapter permits 24VAC
with a tapered, free-spinning, spring loaded
input
collar – two change keys/cylinder
• Metals/Finishes – Exposed Faceplate
• KCE – Stop (push) side key cylinder
Bright Stainless Steel (ANSI 629, US32)
extension extends working length of a
Bright Brass (ANSI 605, US3)
standard mortise key cylinder
Bright Chromium (ANSI 625, US26)
to adapt to jamb depths within a range
of 4” to 9” (advise jamb depth dimension).
Consult with our technical service personnel regarding
Customer supplied cylinders shall be factory fitted to
custom applications such as retrofits to existing lock
each KCE. Special fitting is required with non-Yale
installations and special mounting situations.
Ordering Information – 2020
/2050 Electromechanical Series
Bolt
U.S. patent #4237711
.937" Backset
1.510"
Frame Opening
Bolt
Canadian
patent
#1110462
Description
Key Cylinder
Extension
(KCE)
Throw
Great Britain patent #2014230
throw
2020
keyedoneside
Required
if keycylinderis mountedonstop(push)side of frame
3/4”
2020
keyedtwosides
Required
onstop(push)side of frame
3/4”
model
Description
key cylinder Extension
2022
2020
keyed2052
one side
2050
keyedoneside 3/4” Required
if keycylinderis1.500"
mounted
onstop(push)side of frame
(2020)
1.630"
2056 if key
2050
keyed
twosides
Required
onstop(push)side
of (2050)
frame
Required
cylinder
Model
(kcE)2022
2026
1”
1”
is mounted on stop
Example:
2022 – FSE – MSLH – FKC – LHR – US32D – Door Thickness
(push) side of frame
2026
2052
2020
2050
Model
Optional
Hand of Lock
Faceplate
Function
3/4”
Features
Finish
FSE
See our
"Motor
See our
Secure
Lock Function
"Hand of Locks
2022 or 2052 Fail
US32D or US4 (std),
See above
Required
on
stop
12-24Reference
Screw, (2) Guide"
Keyed
1
sideReference Guide" descriptions
for optional
FS
for a full description for
for description
metals/finishes, see
symbol.
(push)2026
side
of frame
Safeof available
and
symbol.
or 2056 Fail
"Optional Features"
Keyed
2
sides lock functions.
section above
keyed &two
sides
Keying
Mode
keyed one side
1”
2020 series illustrated
Note:This illustrationis for information only. Do not use for construction.
Door and frame preparation drawings
and wiring schematics are available
fromthe factory.
1.625" (2020)
1.875" (2050)
.187"
Door
Thickness
1-3/4"
or
2"
2020/2050, 10-25-07
4.000" (2020)
4.250" (2050)
Required if key cylinder
is mounted on stop
(push) side of frame
2056
2050
keyed two sides
Required on stop
(push) side of frame
.125"
1”
Frame Opening
9.510" (2020)
9.885" (2050)
12-24 T ap, (4)
Brink 2020/2050
3
Ordering Information – 2020
/2050 Electromechanical Series
Een goed beveiligd pand
geeft een goed gevoel...
Maar hoe weet u zeker dat
u niets over het hoofd ziet?
Blankestijn Beveiliging
werkt al meer dan
15 jaar als landelijk
erkend bouwkundig
beveiligingsbedrijf en wil
Borg/PkVW cErtiFicEring
BoUWkUnDig BEVEiligEn
ElEctromEchaniSch BEVEiligEn
SlUitSYStEmEn
WaarDEBErging
toEgangScontrolE
graag uw rechterhand zijn
in beveiligingszaken.
Wij leveren en installeren
in bijna alle situaties op
alle mogelijke plekken vele
vormen van beveiliging.
Hiernaast ziet u een
traliEWErk & rollUikEn
mEEnEEmBEPErkEnD
VlUchtWEgBEVEiliging
anti-ramPalEn
opsomming van wat wij
daarmee bedoelen.
a D V i E S
Brink 2020/2050
|
m o n t a g E
|
S E r V i c E
|
o n D E r h o U D
4
Pascalstraat 14a, 3771 RT Barneveld | Tel.: 0342-491 767 | [email protected] | www.blankestijn-beveiliging.nl