M100 LED Direct [L10] selux.us

Transcription

Customer:
Date:
Project:
Qty:
Type:
M100
LED Direct
Order Code:
L10
L10
-
Series
-
-
-
-
-
-
-
-
-
-
L10
M100 LED Direct
Light Engine
CCT
1A351
725lm/8.5W
per foot
30
Shielding
LW
MI
Mounting
C
S
536lm/6.0W
per foot
1
Values calculated from a 4’ fixture @4000K using LW
Shielding and DIM driver.
For additional information please see page 2.
2
Available starting at 2’ and up.
3
Consult factory for lengths under 2’
4
Over 8’ supplied with 2 or more housings that are joined
in the field.
1A201,2
435lm/4.9W
per foot
35
40
RS
W3
3500K
3000K
4000K
LED Optimized Clear Lens with
white lens
Microprism
Cable
Swivel Stem
Finish
WH
BK
SV
Voltage
120
277
UNV
1 ft.
02
2 ft.
03
3 ft.
04
Rigid Stem
01*
4 ft.
05
5 ft.
06
6 ft.
F4
Wall Mount
07
7 ft.
08
8 ft.
Surface Mount
09
9 ft.
10
11
10 ft.
11 ft.
12
12 ft.
*1’ fixture only available with 1 A35 light engine
Individual fixtures, Runs and Configurations are supplied in nominal lengths to ensure full, even,
illumination. See pages 2 thru 6 for additional details.
White
Black
120 Volt
277 Volt
DIM5
DM5,6
0-10V
(Linear)
Fixture
Options
DL8
Emergency
Options
EC11
Damp Location
Rated
eldoLED
SOLOdrive 0-10V
(Linear)
FS8
In-line Fuse
Silver
SP
Specify Premium Color
XX
Runs (over 12’) & Configurations, round up to the
nearest foot and replace the “xx” with the # (i.e.
13=13’ nominal)
Custom colors are available,
Please consult factory
120 thru 277
50/60hz capable
DMD5,6
DML5,6
eldoLED DALI
eldoLED
SOLOdrive 0-10V (Logarithmic)
(Logarithmic)
SS 5
Separate
Switching
C99
90 CRI
DC25,6,7
Lutron 2-Wire
DC35,6
Lutron 3-Wire
DCE5,6
Lutron Eco-System
V9012
Lit Inverted
90° Corner
IT9012
Lit “T” section
5
See page 7 for full details
6
Not available for 1’ length
120V only
7
xxxx10
LED MR16 downlight
Emergency Circuit Wiring
Configuration IL9012
Lit Horizontal
Options
90° Corner
YEAR
1A251,2
Nominal
Fixture
Length
Driver
5
638lm/7.3W
per foot
27
2700K
LED WARRANTY
1A301,2
IX9012
Lit “X” section
8
See page 8 for full details and restrictions
9
For 2700K & 4000K consult factory
10
Consult factory
11
12
ARRA
Compliant
Selux Corporation © 2016, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 1 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
4”
(101mm)
3 11/16” (94mm)
3 15/16”” (100mm)
LW lens shown for reference
Construction:
Electrical/Performance:
Luminaire Finish:
Housing - Continuous, low copper 6063-T6
extruded aluminum profile with aluminum
endcaps, available as Individual fixtures (up to
12’) or Runs.
LED Light Engine - Brand-name mid-power
LEDs create a high efficiency LED light engine
able to provide a lumen maintenance of 96%
at 25,000 hours and 93% at 60,000 hours per
TM-21 report.
Powder Coat - All Selux luminaries are finished
in high quality polyester powder coating in our
Tiger Drylac certified facility and are tested in
accordance with test specifications for coatings
from ASTM and PCI.
LED Life - Calculated L70 greater than 398,000
hours and Reported L70 greater than 60,000
hours @ 25°C per TM-21
All products undergo a five stage intensive
pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux
powder coated products provide excellent salt
and humidity resistance as well as ultra violet
resistance for color retention.
Geartray - Low copper 6063-T6 extruded aluminum profile
Shielding - Extruded, impact resistant acrylic
lens:
- LED optimized white lens (LW)
- Clear lens with microprism (MI)
Mounting(s) - 1/16” Aircraft Cable, Ø5/8”
Swivel or Rigid Steel Stem, Wall Bracket, Surface
mounting (see pages 3 thru 6 for details).
** Cable, Stem and Wall mountings may not be
symmetrical for Runs and Configurations due
to the use of modular housing lengths. If symmetrical suspensions are required please consult
the factory.
Standard Luminaire lengths - All standard
luminaires are supplied in nominal lengths to
ensure full, even, illumination. Runs and Configurations are available in approximately 1/4”
increments starting at the nominal 12’ fixture
length.
** Individual luminaires are not joinable in the
field.
Exact length luminaires - Individual luminaires, runs, and configuration are available
in exact lengths to meet your project needs.
Please consult factory with your requirements.
** Lens luminance may soften at the very
ends of the straight sections for exact length
luminaires.
Delivered Lumens - Due to LED manufacturer’s
tolerances the listed output has a ±5% tolerance. For outputs based on different shielding
or CCT please see photometry section at the
end.
CCT - Available in 2700K, 3000K, 3500K and
4000K, tolerance within a 3-step MacAdam
ellipse.
CRI - Min. 80. Optional 90CRI - for 2700K &
4000K, consult factory.
All Drivers - High efficiency, constant current,
soft start, Electronic Class 2 with a PFC>0.90.
For more detailed information on the available
drivers please see page 7.
Thermal Performance:
Ambient Operating Temperature - Luminaires suitable for Max. ambient temperature of
35° C (95° F) for all drivers.
Min. ambient temperature of:
-20°C (-4°F) for DIM, DM, DML and DMD drivers.
0°C (32°F) for the DC2, DC3 and DCE drivers.
Standard interior colors are White (WH), Black
(BK), and Silver (SV). Selux premium colors (SP)
are available, please specify from your Selux
color selection guide.
Warranty:
5 Year Limited LED Luminaire Warranty Selux offers a 5 Year Limited Warranty to the
original purchaser that the M100 series LED
luminaire shall be free from defects in material and workmanship for up to five (5) years
from date of shipment. This limited warranty
covers the LED driver and LED light engine when
installed according to Selux instructions and
operated within the Ambient Temperature. For
additional details and exclusions, see “Selux
Terms and Condition of Sale.”
Certifications and Compliance:
NRTL - For Dry and Damp location
(I.E. cULus)
ARRA Compliant
RoHS Compliant
L10 Joiner(s) - Runs and configurations are
supplied in multiple housing that are joined
together in the field using the supplied L10
Joiner System. This allows ease of installation
and ensures a uniform appearance (see page 8
for detail).
Page 2 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Cable Mounting (C)
Cable Mounting (C)
1. Ø 1/16” Aircraft Cable with chrome gripper for easy
adjustment (48” max. from ceiling to luminaire).
Cable Mounting (C) - Dimensions
Nominal
Length
01 (1 ft.)
“A”
Housing Length
* “B” (Ref.)
End Suspensions
“C”
Mid. Suspension
“D”
Feed Location
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
1' - 5/16"
313
0' - 2 1/8"
54
0' - 8 1/8"
206
0' - 1 1/8"
29
02 (2 ft.)
2' - 1/4"
616
0' - 2 1/8"
54
1' - 8"
508
0' - 1 1/8"
29
03 (3 ft.)
3' - 5/16"
923
0' - 3 1/8"
79
2' - 6 1/8"
764
0' - 2 1/8"
54
04 (4 ft.)
3' - 11 7/16"
1205
0' - 3 1/8"
79
3' - 5 3/16"
1047
0' - 2 1/8"
54
05 (5 ft.)
4' - 11 7/16"
1510
0' - 3 1/8"
79
4' - 5 3/16"
1351
0' - 2 1/8"
54
06 (6 ft.)
5' - 11 7/16"
1815
0' - 3 1/8"
79
5' - 5 3/16"
1656
0' - 2 1/8"
54
54
07 (7 ft.)
6' - 11 7/16"
2119
0' - 3 1/8"
79
6' - 5 3/16"
1961
0' - 2 1/8"
08 (8 ft.)
7' - 11 7/16"
2424
0' - 3 1/8"
79
7' - 5 3/16"
2266
0' - 2 1/8"
54
09 (9 ft.)
8' - 11 7/16"
2729
0' - 3 1/8"
79
8' - 5 3/16"
2570
0' - 2 1/8"
54
10 (10 ft.)
9' - 11 7/16"
3034
0' - 3 1/8"
79
9' - 5 3/16"
2875
0' - 2 1/8"
54
11 (11 ft.)
10' - 11 7/16"
3339
0' - 3 1/8"
79
10' - 5 3/16"
3180
0' - 2 1/8"
54
12 (12 ft.)
11' - 11 7/16"
3643
0' - 3 1/8"
79
11' - 5 3/16"
3485
0' - 2 1/8"
54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
L10 Cable (C) Suspension Detail
L10 Cable (C) Suspension Detail
(Feed location(s) only)
(Non-Feed location(s) only)
Outlet box for feed only
(by others)
Cross bar with 1/4-20
rod and ground screw
2x Outlet box screws
(by others)
1/4” x 5” diameter canopy
(white)
Cord strain relief bushing
1/4”- 20 Threaded Rod
(supplied & installed in the
field by others)
1/4” x 2” diameter Canopy
(white)
1/4-20 Slip ring coupler
1/16” Aircraft cable
1/4-20 Slip ring coupler
Chrome gripper
Feed cord (white)
Luminaire
1/16” Aircraft cable
2x White cable stay
Chrome gripper
Luminaire
Page 3 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Stem Mounting (S & RS)
Stem Mounting (S & RS)
1. Ø 5/8” Swivel Stem provides 30° swivel and can be cut in
field (48” max. from ceiling to luminaire).
2. Ø 5/8” Rigid Stem is fixed and is not able to be cut/adjusted
in field (48” max. from ceiling to luminaire).
Swivel (S) & Rigid Stem (RS) Mountings - Dimensions
Nominal
Length
“A”
Housing Length
* “B” (Ref.)
End Suspensions
“C”
Mid. Suspension
“D”
Feed Location
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
01 (1 ft.)
1' - 5/16"
313
0' - 2 1/8"
54
0' - 8 1/8"
206
0' - 2 1/8"
MM
54
02 (2 ft.)
2' - 1/4"
616
0' - 2 1/8"
54
1' - 8"
508
0' - 2 1/8"
54
03 (3 ft.)
3' - 5/16"
923
0' - 3 1/8"
79
2' - 6 1/8"
764
0' - 3 1/8"
79
04 (4 ft.)
3' - 11 7/16"
1205
0' - 3 1/8"
79
3' - 5 3/16"
1047
0' - 3 1/8"
79
05 (5 ft.)
4' - 11 7/16"
1510
0' - 3 1/8"
79
4' - 5 3/16"
1351
0' - 3 1/8"
79
06 (6 ft.)
5' - 11 7/16"
1815
0' - 3 1/8"
79
5' - 5 3/16"
1656
0' - 3 1/8"
79
07 (7 ft.)
6' - 11 7/16"
2119
0' - 3 1/8"
79
6' - 5 3/16"
1961
0' - 3 1/8"
79
08 (8 ft.)
7' - 11 7/16"
2424
0' - 3 1/8"
79
7' - 5 3/16"
2266
0' - 3 1/8"
79
09 (9 ft.)
8' - 11 7/16"
2729
0' - 3 1/8"
79
8' - 5 3/16"
2570
0' - 3 1/8"
79
10 (10 ft.)
9' - 11 7/16"
3034
0' - 3 1/8"
79
9' - 5 3/16"
2875
0' - 3 1/8"
79
11 (11 ft.)
10' - 11 7/16"
3339
0' - 3 1/8"
79
10' - 5 3/16"
3180
0' - 3 1/8"
79
12 (12 ft.)
11' - 11 7/16"
3643
0' - 3 1/8"
79
11' - 5 3/16"
3485
0' - 3 1/8"
79
L10 Swivel Stem (S) Suspension Detail
L10 Rigid Stem (RS) Suspension Detail
(feed wires through stem supplied by Selux)
(feed wires through stem supplied by Selux)
3/8 IP nipple
(supplied & installed by others)
Outlet box
3/8”IP Cross bar with ground screws
Outlet box
Square nut
Pin
Hemispherical assembly
1 7/16” x 5” diameter canopy
(white)
Suspension hickey
Square nut
1/4” x 5” diameter canopy
(white)
3/8” IP steel stem (white)
Canopy securing screw
Dress nut
3/8” IP steel stem (white)
Luminaire
Square nut
Dress nut
Luminaire
Square nut
Page 4 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Wall Mounting (W)
Wall (W) Mount - Dimensions
Nominal
Length
“A”
Housing Length
* “B” (Ref.)
End Suspensions
“C”
Mid. Suspension
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
01 (1 ft.)
1' - 5/16"
313
0' - 6 3/16"
157
NA
02 (2 ft.)
2' - 1/4"
616
0' - 3 1/8"
79
1' - 6 1/16"
“D”
Feed Location
MM
Feet/Inch
MM
0' - 6 3/16"
157
458
0' - 3 1/8"
79
03 (3 ft.)
3' - 5/16"
923
0' - 6 1/8"
156
2' - 1/8"
612
0' - 6 1/8"
156
04 (4 ft.)
3' - 11 7/16"
1205
0' - 6 1/8"
156
2' - 11 3/16"
894
0' - 6 1/8"
156
05 (5 ft.)
4' - 11 7/16"
1510
0' - 6 1/8"
156
3' - 11 3/16"
1199
0' - 6 1/8"
156
06 (6 ft.)
5' - 11 7/16"
1815
0' - 6 1/8"
156
4' - 11 3/16"
1504
0' - 6 1/8"
156
07 (7 ft.)
6' - 11 7/16"
2119
0' - 6 1/8"
156
5' - 11 3/16"
1808
0' - 6 1/8"
156
08 (8 ft.)
7' - 11 7/16"
2424
0' - 6 1/8"
156
6' - 11 3/16"
2113
0' - 6 1/8"
156
09 (9 ft.)
8' - 11 7/16"
2729
0' - 6 1/8"
156
7' - 11 3/16"
2418
0' - 6 1/8"
156
10 (10 ft.)
9' - 11 7/16"
3034
0' - 6 1/8"
156
8' - 11 3/16"
2723
0' - 6 1/8"
156
11 (11 ft.)
10' - 11 7/16"
3339
0' - 6 1/8"
156
9' - 11 3/16"
3028
0' - 6 1/8"
156
12 (12 ft.)
11' - 11 7/16"
3643
0' - 6 1/8"
156
10' - 11 3/16"
3332
0' - 6 1/8"
156
Wall Mount (W)
(Covers a 4x4 or 2x4 J-Box)
1. Aluminum wall bracket (by Selux)
2. 4”x4” or 2”x4” J-Box at feed location (supplied and installed by
others).
3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to
anchor the wall bracket. Mounting hardware supplied and installed
to code by others.
4”
(102mm)
4”
(102mm)
1”
(25mm)
4 15/16”
(126mm)
Page 5 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Surface Mounting (F) - 1’ to 8’
Surface Mounting (F) - Over 9’ to 12’
Surface Mount (F) - Dimensions
Nominal
Length
01 (1 ft.)
“A”
Housing Length
* “B” (Ref.)
End Suspensions
Feet/Inch
MM
Feet/Inch
MM
1' - 5/16"
313
0' - 1 5/8"
41
* “B1”
End Suspensions
Feet/Inch
MM
N/A
“C”
Mid. Suspension
Feet/Inch
MM
0' - 9 1/8"
231
“C1”
Mid. Suspension
Feet/Inch
MM
“C2”
Mid. Suspension
Feet/Inch
N/A
MM
“D”
Feed Location
Feet/Inch
MM
N/A
0' - 4 1/8"
105
02 (2 ft.)
2' - 1/4"
616
0' - 1 5/8"
41
N/A
1' - 9"
534
N/A
N/A
0' - 4 1/8"
105
03 (3 ft.)
3' - 5/16"
923
0' - 6 1/8"
156
N/A
2' - 1/8"
612
N/A
N/A
0' - 2 1/8"
54
04 (4 ft.)
3' - 11 7/16"
1205
0' - 6 1/8"
156
N/A
2' - 11 3/16"
894
N/A
N/A
0' - 2 1/8"
54
05 (5 ft.)
4' - 11 7/16"
1510
0' - 6 1/8"
156
N/A
3' - 11 3/16"
1199
N/A
N/A
0' - 2 1/8"
54
06 (6 ft.)
5' - 11 7/16"
1815
0' - 6 1/8"
156
N/A
3'
914
1' - 11 3/16"
590
N/A
0' - 2 1/8"
54
07 (7 ft.)
6' - 11 7/16"
2119
0' - 6 1/8"
156
N/A
3'
914
2' - 11 3/16"
894
N/A
0' - 2 1/8"
54
08 (8 ft.)
7' - 11 7/16"
2424
0' - 6 1/8"
156
3'
914
3' - 11 3/16"
1199
09 (9 ft.)
8' - 11 7/16"
2729
0' - 6 1/8"
156
0' - 6"
153
3' - 11 3/16"
1199
10 (10 ft.)
9' - 11 7/16"
3034
0' - 6 1/8"
156
0' - 6"
153
3'
914
1' - 11 3/16"
11 (11 ft.)
10' - 11 7/16"
3338
0' - 6 1/8"
156
0' - 6"
153
3'
914
2' - 11 3/16"
12 (12 ft.)
11' - 11 7/16"
3643
0' - 6 1/8"
156
0' - 6"
153
3'
914
3' - 11 3/16"
N/A
0' - 2 1/8"
54
3'
914
0' - 2 1/8"
54
590
3'
914
0' - 2 1/8"
54
894
3'
914
0' - 2 1/8"
54
1199
3'
914
0' - 2 1/8"
54
NA
N/A
Surface Mount (F)
1. Ø 5/16” Mounting hole drilled at the factory
(mounting hardware to code by others).
Page 6 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Drivers:
0-10V linear dimming (DIM)
Luminaires supplied with drivers offering the capability of either normal
switched operation of 0-10V dimming for linear dimming curve. Fixtures
ship wired for dimming. For on/off functionality, simply cap the dimming
leads. Minimum dimming level preset at factory to 1%. Maximum inrush
current per driver is 30mA2s & 0-10V control current is maximum 2mA
per driver. (Due to size constraints, 1’ luminaires are supplied with a driver
from a different manufacturer than 2’ and above luminaires. For details,
please consult factory.)
LUTRON 2-wire dimming (DC2)
Luminaires supplied with A-series 2-wire dimming driver programmed for
Constant Current Reduction (CCR). For Pulse Width Modulation (PWM)
dimming, please consult factory. Minimum dimming level down to 1%.
Inrush current per driver <2A.
LUTRON 3-wire dimming (DC3)
Luminaires supplied with A-series 3-wire dimming driver programmed for
Constant Current Reduction (CCR). For Pulse Width Modulation (PWM)
dimming, please consult factory. Minimum dimming level down to 1%.
Inrush current per driver <2A.
eldoLED SOLOdrive 0-10V linear dimming (DM)
Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dimming curve. Minimum dimming level preset at factory to 1%. For “dim to
dark” (down to 0.1%), please consult factory. Maximum inrush current per
drive is 30mA2s & 0-10V control current is maximum 2mA per driver.
LUTRON Ecosystem dimming (DCE)
Luminaires supplied with A-series EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). For Pulse
Width Modulation (PWM) dimming, please consult factory. Minimum
dimming level down to 1%. Inrush current per driver <2A.
eldoLED SOLOdrive 0-10V logarithmic dimming (DML)
Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic
dimming curve. Minimum dimming level preset at factory to 1%. For “dim
to dark” (down to 0.1%), please consult factory. Maximum inrush current
per drive is 30mA2s & 0-10V control current is maximum 2mA per driver.
* For control recommendations and system layout for Lutron drivers,
please contact Lutron.
eldoLED SOLOdrive DALI dimming (DMD)
Luminaires supplied with SOLOdrive DALI dimming driver for logarithmic
dimming curve. Minimum dimming level preset at factory to 1%. For “dim
to dark” (down to 0.1%), please consult factory. Maximum inrush current
per drive is 30mA2s.
* For control recommendations for eldoLED drivers, please consult
eldoLED.
Driver Quantity
DIM, DM, DML & DMD drivers
DC2, DC3, & DCE drivers
1 ft.
2 ft.
3 ft.
4 ft.
5 ft.
6 ft.
7 ft.
8 ft.
9 ft.
10 ft.
11 ft.
12 ft.
RUN
1
1
1
1
1
1
2
2
2
2
3
3
Approximately 1 driver
per 4 ft.
N/A
1
1
1
2
2
2
2
3
3
3
3
Consult Factory
Wiring Diagrams
0-10V linear (DIM)
0-10V linear eldoLED SOLOdrive (DM)
0-10V logarithmic eldoLED SOLOdrive (DML)
DALI eldoLED SOLOdrive (DMD)
Philips SR DALI (SR)
standard
DIM, DM,
DML, DMD & SR
DALI
DALI
Page 7 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the
hot wire for each feed. (supplied with an 8A slow burn fuse).
Damp Location (DL) - Luminaires are suitable for use in damp
location(s). Examples of such locations include protected areas under
canopies, marquees, roofed porches, and similar locations where the
fixture(s) are protected from direct contact with rain, snow, or excessive
moisture (such as ocean spray). Interior locations include areas subject
to moderate degrees of moisture, such as basements and certain barns
and cold storage buildings. All solder points on LED boards are conformal
coated. The phosphor layer of the LEDs is free of coating to avoid hazing.
Separate Switching (SS) - Luminaires available with separately
switched 4’ (nominal) sections starting at 7’ and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use).
- To specify this option, the number of separately switched sections and
locations of these sections must be provided at time of order.
* If the project requires different separate switching than outlined above
please consult the factory.
Emergency Circuit (EC) - Luminaires with EC option compliant to UL
924 listed emergency luminaire. EC luminaires are intended to be wired to
separate panels/breakers for emergency use.
- For 1’ to 6’ nominal luminaires, the entire fixture is wired for
operation on emergency circuit.
- For 7’ and up nominal luminaires, the first 4’ nominal length is
wired for operation by a separate EM circuit by default to meet
the required “Life Safety Code” (NFPA 101).
*If a different configuration is needed please consult the factory.
Joiner System - standard for Runs and Configurations
Page 8 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Standard Direct shapes/configurations:
Listed below are the minimum lengths and details for standard shapes.
These standard shapes can be combined with each other and/or the
standard luminaire lengths, ensuring full even illumination. If you have any
questions, please consult the factory.
The minimum standard lengths for “L” shapes:
- IL90 or V90 open shapes is 4’ x 4’ nominal (example: leg, 90, leg)
- IL90 or V90 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90)
(E xception is that the IL90 & V90’s can be joined directly to provide
a 4’ x 4’ nominal shape)
The minimum standard lengths for “T” & “X” shapes:
- IT90 = 4’ nominal on the short leg and 8’ nominal on the long side
- IX90 = 8’ nominal for either direction
Project Specific Direct shapes/configurations:
Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements.
Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.
Direct Lit Corner and Section - Dimensions
IL90
V90
Feet/Inch
MM
“A” Housing (Outside)
2' - 2 1/16"
662
“A1” Housing (Inside)
1' - 10 1/8"
562
IT90
Feet/Inch
MM
“B” Housing (Outside)
2' - 3 1/2"
698
“B1” Housing (Inside)
1' - 11 1/2"
597
IX90
Feet/Inch
MM
Feet/Inch
MM
“C” Housing
2' - 2 1/16"
662
* “C1” Ref.
2' - 1/8"
612
“D” Housing
4' - 3/16"
1224
“E” Housing
* “D1” Ref.
2' - 1/8"
612
4' - 3/16"
1224
* “E1” Ref.
2' - 1/8"
612
Page 9 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Photometry
LW Optics / 34W LED / 4000K CCT
1029
Link to photometry (IES & PDF files)
772
515
257
Catalog #: L10-1A35-40-LW-04-120
Report #: 747916
Delievered Lumens: 2900
Input Watts: 34W
Efficacy: 85
Power Factor: 0.994
Total Harmonic Distortion: 5.07
CCT: 3950K
CRI: 83.9
Max Candela: 1029 @ 2.5° from Vertical
Spacing Criterion (0-180): 1.28
Spacing Criterion (Diagonal): 1.38
MI Optics / 34W LED / 4000K CCT
1
2
Maximum Candela = 1029.4 Located At Horizontal Angle = 0, Vertical Angle = 2.5
# 1 - Vertical Plane Through Horizontal Angles (90 - 270)
1657
Link to photometry (IES & PDF files)
1243
829
414
Catalog #: L10-1A35-40-MI-04-120
Report #: 89781-A3540
Delivered Lumens: 2699
Input Watts: 32.8W
Efficacy: 85
Power Factor: 0.994
Total Harmonic Distortion: 5.07
CCT: 3950K
CRI: 83.9
Max Candela: 1657 @ 15° from Vertical
Spacing Criterion (Diagonal): 1.10
1
2
Maximum Candela = 1657.192 Located At Horizontal Angle = 90, Vertical Angle = 15
Page 10 of 11
(Rev. 09/2016)
M100LED Direct_v2.0
M100
LED Direct
Photometry
CCT Multiplier
4000K
1.000
3500K
0.936
3000K
0.945
2700K
0.923
90 CRI
Multiplier
4000K
0.884
3500K
0.924
3000K
0.880
CCT and CRI multipliers apply to the
photometry, IES files, and per foot values
listed on page one (light engine).
Light Engine Multiplier
Engine
Lumens
1A35
1.00
Watts
1.00
1A30
0.88
0.86
1A25
0.74
0.71
1A20
0.60
0.58
Light engine multiplier supplied for per foot
values listed on page one (light engine).
Page 11 of 11
(Rev. 09/2016)
M100LED Direct_v2.0

M100 LED Direct [L10] selux.us

Transcription

Similar documents

M60 LED Direct/Indirect [L6DI] selux.us

LTD7410 - APOLLO 10 - 1100 LUMEN

Driver Product Portfolio - Supreme Components International

Standard Nomenclature

4" IC LED Housing (10W) w/ 4" Deep LED Reflector

4" IC Remodel LED Housing (10W) w/ 4" Deep LED Reflector

Green Cobra™

M60 LED Recessed [L6Rx] selux.us

4" Remodel LED Housing (10W) w/ 4" Deep LED Reflector

RA6LSA INST - ConTech Lighting

Wood Stove SW740