Direct Fastening Chapter 4094.7kB

Transcription

Direct Fastening
Direct Fastening
Gas-actuated tools
Gas-actuated tool GX 120-ME
Page 152
Nails and accessories
Nail for use with gas-actuated tools X-GN MX
Page 152
Nail for use with gas-actuated tools X-GHP MX
Page 152
Nail for use with gas-actuated tools X-EGN MX
Page 152
Conduit clip X-FB MX
Page 153
Cable tie holder X-ECT MX
Page 153
Cable clamp X-EKS MX
Page 154
Butterfly conduit clip X-DFB MX
Page 154
Cable trunking fastener X-ET MX
Page 154
Ceiling clip X-CC MX
Page 154
GX 120 gas can GC 20/21/22
Page 155
Powder-actuated tools
Powder-actuated tool DX 460-F8
Powder-actuated tool DX 460 MX 72
Page 159
Forming nail X-CT MX
Page 159
Forming spacer X-FS
Premium nail for concrete and steel X-U P8
Page 159
Page 160
Page 160
Premium collated nail for concrete and steel X-U MX
Page 160-161
Hand-drive tool BD1
Page 161
Micky pin with steel washer PN nails
Page 162
Steel washers for use with nails Steel washers
Page 162
Ceiling hanger X-HS M P8 S15 Page [NoVersionPageNo]
Page 162
Ceiling hanger X-CC Page [NoVersionPageNo]
Page 162
Pole tools and accessories X-PT
Page 162
Powder-actuated marking tool DX 462 HM
Accessories
Marking head X-462
Marking characters
Powder-actuated grating tools
7
Page 163
Page 163
Page 163-164
Powder-actuated tool DX 460-GR
Page 165
Powder-actuated tool DX 351-BTG
Page 166
Cordless drill X-BT 4000-A
Page 166
Hilti. Outperform. Outlast.
Threaded stud (for steel, with 8 mm washer) X-CR M8
Page 165
Grating disc (duplex coated) X-FCM-M
Page 165
Sealing ring X-FCP
Page 165
Threaded stud for coated steel X-BT M8
Page 166-167
Semi automatic tools
Semi-automatic powder-actuated tool DX 76-PTR
Direct Fastening Contents Page
Page 159
Premium nail with steel washer, for concrete and steel X-U P8 S
Powder-actuated marking tools
144
Page 158
DX cartridge 6.8/11 M10
Forming nail X-CT DP8
Direct Fastening Systems
Page 158
www.hilti.co.za | 08000 23331
Page 168
145
GX 120-ME
Interior finishing
nn Mechanical :Fastening conduit, metal and plastic pipes.
GX 120
GX 120 / GX 120-ME
Designation
nn Electrical :Fastening electrical boxes, cables, pipes
and plastic electrical trunking.
Photo
Dimension
20 mm
X-GHP
DX 460-MX
Construction
nn Construction :Fastening mesh for render and plaster
Designation
Temporary fastenings (barriers,…)
Formwork and shuttering
nn Construction :Fastening mesh for render and plaster
Mechanical & Electrical
DX 460
Temporary fastenings (barriers,…)
Formwork and shuttering
Designation
Fastenings for wall ties
DX 460 X-IE
nn Construction :
Fastening composite thermal insulation systems
DX 460-GR
nn Energy & Industry : Fastening of grating and checker plate
nn Steel & Metal :
DX 462
DX 462-CM / HM
DX 76
nn Energy & Industry : Hot and cold marking on steel.
nn Steel & Metal :
DX 76 PTR
Fastening wire mesh
Dimension
Application
DX 76-HVB
DX 351-BT
7
Fastening on standard concrete,
hard/precast concrete
X-GHP
20 mm
X-FB
ø 8-11-16-20-22
25-28-32-40
X-DFB
ø 16-20-22-25-28
X-EMTSC
ø 16-20-25
X-EKS
ø 16-20-25-32-40
X-EKSC
ø 16-20-25
Fastening conduit & pipe
X-EKB
4/8/16 cables
Fastening elctrical cables
X-ET
-
Fastening conduit, metal &
plastic pipes
Fastening conduit, metal &
plastic pipes
X-ECT
nn Steel & Metal :Fastening of profiled metal sheets to steel
Fastening of long span decks and
liner trays for sheet steel roofing and
cladding
nn Steel & Metal :
X-BT
Application
Fastening insulating membranes
nn Steel & Metal :
Fastening electrical box
& trunking
hear connector fastening for composite
S
floor construction
nn Energy & Industry : Fastening on high strength steel.
astening on coated or painted steel to
F
avoid corrosion & through penetration.
Grating fixing.
Electrical & instrumentation fixing.
Recommended
146
Photo
Fastening of metal track, hat track
for partition wall
Metal profile fastening to walls for
suspended ceilings
Dimension
Nail: 20 mm
Washer: Ø 36mm
X-GHP &
R36 washer
Fastenings for wall ties
DX 460 F8
Photo
Application
GX 120-ME
Steel
Base Material
Consumables for
gas-actuated tools
GX 120
Gas-actuated tools
Concrete
Applications
Masonry
Tool
Sand lime block
Direct Fastening
Hollow brick
Direct Fastening
Suitable
147
Consumables for powder-actuated tools
X-U
Single nails P8 : 15  72
Magazine nails : 16  72
Fastening on steel, concrete
& concrete block
X-C
Single nails : 20  117
Fastening on concrete
& concrete block
X-FS
With pre-mounted nail:
52 & 72 mm
Fastening form stop for
form working
X-IE
-
30  120 mm
X-SW
37, 47 & 62 mm
R23/36
With pre-mounted nails:
27, 32, 37, 42, 47, 52 & 62 mm
Steel & Metal
esignationWith magazined
D
nails
X-ENP
HVB
21 mm
DX 351 MX
Single nails: 16  72 mm
Magazine nails: 16  72 mm
X-FB
Ø 15 to 40 mm
Without premounted nail:
Ø 8 to 40 mm
X-DFB
Ø 15 to 40 mm
Ø 16 to 40 mm
X-EMTSC
-
Diameter 16, 20 & 25 mm
X-EKS
-
Diameter 16, 20, 25, 32 & 40 mm
X-EKSC
-
Diameter 16, 20 & 25 mm
X-EKB
X-ECH
Fastening profile metal sheet
Fastening shear connector for
concrete-steel composite construction
-
50  140 mm
X-CRM8
-
Thread diameter: M8
Thread length: 12 & 15 mm
X-FCM
-
X-FCP
-
X-GRU
-
For grating height: 25 to 30mm
Fastening grating
& 35 to 40 mm
X-BT
-
Thread diameter: M8, M10, W10 Fastening that avoid corrosion on
painted or coated steel
Thread length: 15 mm, 24 mm
Fastening on high strength steel
Fastening on steel, concrete
& concrete block
Fastening conduit and pipe
Fastening conduit and pipe
Fastening plastic pipe
Fastening electric cables
Mesh fixing
Waterproofing joint fixing
Application
Application
8 or 16 tankage cables (Ø 6mm)
4, 8 or 16 tankage cables (Ø 6mm)
Fastening insulation material,
sealing of buildings, felt matting
HVB
148
With singleDimension
nails
X-U
Fastening insulation material
nails
19 mm
X-ENP
DX 351 unit.
Application
DX 460 X-IE
nails
DX 460
Fastening suspended ceiling on
concrete and on steel
DX 351 BT
Construction
D
nails
Internal thread: M6, M8 & M10
Fastening of metal track, hat track
for partition wall
DX 460 GR
-
Application
DX 76 PTR
Single nails : 15  42
X-C
X-HS
nails
DX 76 HVB
Interior finishing
D
nails
Mechanical and Electrical
D
nails
DX 351 MX
Direct Fastening
DX 351 unit.
Direct Fastening
-
X-ET
For 10, 20 or 30 tankage cables
-
X-CC
-
Nail length: 16, 22 & 27 mm
X-HS
-
Internal thread: 6, 8 & 10 mm
Nail length: 19, 27 & 32mm
X-M
studs for
concrete
-
Thread diameter: M6, M8
Thread length: 8 to 20 mm
X-EM
studs for
steel
-
Thread diameter: M6, M8
Thread length: 8 to 20 mm
7
Fastening electrical box
& trunking
Fastening suspended
components (i.e lights,…)
Fastening suspended elements
Fastening various elements on
steel & concrete
For grating height: 25 to 30mm, Fastening grating and floor plate
on steel structure
35 to 40 mm & 45 to 50 mm
For floor plate height:
5 to 13 mm
149
Direct Fastening
Direct Fastening
Fast by nature
Hilti direct fastening systems.
The right choice.
Superior fastening solutions for every situation.
Fasten in a fraction of a second –
0.7 seconds is all it takes! Wouldn’t
you also like to be able to finish more
jobs in less time, without cutting
corners or taking risks? The speed,
efficiency, simplicity and reliability of
Hilti DX Systems make it possible. DX
not only keeps vibration, noise and
dust to a minimum, it also lets you
work more efficiently and more safely,
especially overhead or at heights.
150
Insulation fastening
M&E installations
Track fastening
Fast and reliable installation of soft
insulation material on façades: The
DX 460 can be easily converted
to perform a number of different
applications.
The DX 351 ME is ideal for mechanical
and electrical installation work at floor
level,on walls and ceilings. It saves
time, effort and hassle.
The GX120 is the first choice for dry
wall track fastening. It is cordless and
works without a battery.
151
Direct Fastening
Direct Fastening
Gas-actuated tool GX 120-ME
Conduit clip X-FB MX
Key applications & advantages
■
Versatile fastening system for various
electrical and mechanical applications
For quick and convenient repetitive
fastening on concrete, hollow or filled
block and steel
For fastening electrical equipment: conduits, junction boxes, lighting fixtures
Drives 750 fasteners with a single gas
can
World’s first ever tool of its kind with a
gas gauge to help avoid running out of
gas unexpectedly
■
■
■
■
Ordering designation
Package contents
GX 120-ME
1x Gas-actuated tool GX 120-ME, 1x Drift punch X-120 NP kit, 1x Case
Technical data
■
Power (max.)
100 J
Fastener length
range
Fastener intake
14 - 39 mm
Weight
3.8 kg
Dimensions
(LxWxH)
Max. fastener driving rate
Base materials
431 x 134 x 392 mm
Certificates
CE
■
20 nails (+2)
■
Fastening flexible and rigid electrical
conduits, water and heating pipes,
injection hoses
Friction fit in the nose of GX/DX tools
for easy handling
Bracing rib for high rigidity and a tight,
secure hold on flexible conduits
1200 / h
Concrete, Steel,
Block, Masonry, Brick
(sand-lime)
Sales pack
quantity
1 pc
Ordering designation Base materials
X-FB 40 MX
Concrete, Sand-lime block, Masonry (solid), Steel Zinc-coated
X-FB 8 MX
X-FB 11 MX
X-FB 16 MX
X-FB 20 MX
X-FB 22 MX
X-FB 25 MX
X-FB 28 MX
Nail for use with gas-actuated tools X-GN MX
Base materials
COMBO KIT GX 120 + 27MM NAILS
Fastener shank diameter
Concrete, Masonry, Brick, Concrete block
COMBO KIT GX120 + 20 MM NAILS
COMBO KIT GX120 M&E consumables
Combo X-GN 20 MX nails & GC 21 Gas can
Gas nail X-GN 27 MX
X-GN 27 MX
X-GN 20 MX
X-GN 32 MX
X-GN 39 MX
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
3 mm
Sales pack
quantity
1 pc
1 pc
1 pc
1 pc
Item number
3454454
3454455
3454456
3470727
750 pc
3484586
750 pc
340232
750 pc
750 pc
750 pc
340230
340233
340234
Base materials
Colour
Nail for use with gas-actuated tools X-GHP MX
Concrete, Sand-lime
block, Masonry (solid),
Steel
Clip: metal, Washer:
light grey RAL 7035
Corrosion
protection
Material
composition
Corrosion protection Material composition
Item number
274898
Technical data
Zinc-coated
Fixation element:
galvanized steel sheet,
Zinc coating 10-20 µm,
Plastic component:
polyamide (halogen and
silicone free)
Sales pack
quantity
Item number
Fixation element: galvanized steel
sheet, Zinc coating 10-20 µm,
Plastic component: polyamide
(halogen and silicone free)
100 pc
286805
200 pc
286797
200 pc
286798
200 pc
286799
200 pc
286800
200 pc
286801
200 pc
286802
200 pc
286803
Cable tie holder X-ECT MX
Base materials
X-GHP 20 MX
Concrete (hard)
3 mm
Sales pack
quantity
750 pc
Item number
285724
Nail for use with gas-actuated tools X-EGN MX
Base materials
X-EGN 14 MX
Steel
3 mm
152
Sales pack
quantity
750 pc
Item number
340231
Length Dimensions (LxWxH) Height
X-ECT MX
Steel, Concrete, Brick 0 m
37 x 25 x 12 mm
X-ECT UV MX
37 x 25 x 12 mm
X-ECT FR MX
37 x 25 x 12 mm
Material composition
Width
Sales pack
quantity
Item number
12 mm Polyamide, Halogen and silicone free, 25 mm 100 pc
Self-extinguishing according to UL
94 HB
285709
12 mm PBT, Silicon free, Flame-retardant
according to UL 94 V0
285711
12 mm Polyamide, Halogen and silicone free, 25 mm 100 pc
Self-extinguishing according to UL
94 HB
25 mm 100 pc
285710
153
7
Direct Fastening
Direct Fastening
Cable clamp X-EKS MX
GX 120 gas can GC 20/21/22
GC 21
X-EKS 16 MX
Sales pack
quantity
285720
285721
Concrete, Sand-lime block, Masonry (solid), Steel Polyamide, Halogen and silicone free, Self-extinguishing 100 pc
according to UL 94 HB
X-EKS 32 MX
285722
X-EKS 40 MX
38865
285719
X-EKS 25 MX
1 pc
Item number
Item number
X-EKS 20 MX
Sales pack
quantity
285723
Butterfly conduit clip X-DFB MX
Corrosion protection Material composition
X-DFB 16 MX
X-DFB 20 MX
X-DFB 22 MX
X-DFB 25 MX
X-DFB 28 MX
Sales pack
quantity
Item number
100 pc
273383
100 pc
273384
100 pc
273385
100 pc
273386
100 pc
273387
7
Cable trunking fastener X-ET MX
X-ET MX
Length Dimensions (LxWxH) Height
Concrete, Steel 0 m
17 x 17 x 10 mm
10 mm Polyamide, Halogen and silicone free, Selfextinguishing according to UL 94 HB
Width
Sales pack
quantity
Item number
285718
17 mm 250 pc
Ceiling clip X-CC MX
Ordering
designation
X-ECC MX
154
Base materials Length Corrosion
protection
Concrete,
Steel
0m
Dimensions
(LxWxH)
Height
Zinc-coated 29 x 18 x 25 mm 25 mm Fixation element: galvanized steel sheet, Zinc
coating min. 2.5 µm, Plastic component: polyamide (halogen and silicone free)
Width
Sales pack
quantity
18 mm 100 pc
Item
number
228342
155
Direct Fastening
Direct Fastening
ONE FOR ALL.
DX 2 direct fastening system.
Applications
• Attaching kicker plate to concrete
• Fixing sill plate
• Fastening wall ties to steel or concrete
• Attaching drywall track to concrete
• Fastening electrical cable holders to
concrete
• Attaching chicken mesh to concrete
• Nailing wood to steel
• And more!
Highlights
•D
urable metal housing
•H
igh driving energy
•E
rgonomically designed grip and tool
nose
•C
overs a wide variety of applications
•T
ruly cordless and works in all weather
conditions
Advantages
• Easy to use and maintain
• Compact, sleek design allows easy
access to narrow spaces
• Powerful, reliable performance
• Consistent energy output over lifetime
• Lifetime service and repair warranties
• Hilti on-site support and training
Fastening wood to concrete
(e.g. formwork)
Installing dry wall track to concrete
Fastening form stops to concrete
Fastening wall tie to concrete
Attaching electrical cable holders
to concrete
Fixing membrane to concrete
Always ready. Always on.
Having the right tool can make a huge impact on your productivity, especially for repetitive applications. Built with comfort, portability, and performance in mind, the DX 2 is ready to take on
any jobsite challenge.It’s powder-actuated, making it truly cordless, so it’s always ready, always
on, regardless of weather conditions.
156
157
Direct Fastening
Direct Fastening
Powder-actuated tool DX 460-F8
■
■
■
■
■
Fastening wood to concrete, sand-lime
block or steel
Fastening sheet metal to concrete,
sand-lime block or steel
Attaching drainage foils and membranes to concrete or CMU block
Versatility: performs a wide variety of
applications
Outstanding ergonomic design and
reduced recoil
DX cartridge 6.8/11 M10
Technical data
Power (max.)
325 J
Fastener length
range
Fastener intake
12 - 72 mm
6,8/11 M yellow
Single
6,8/11 M black
Weight
3.2 kg
Base materials
700 / h
Certificates
CE
6,8/11 M green
Sales pack quantity
X-CT 52 DP8
Concrete
3.7 mm
100 pc
X-CT 62 DP8
Item number
Concrete
Concrete
3.7 mm
3.7 mm
Concrete
3.7 mm
Concrete
3.7 mm
1x Piston X460P8, 1x Fastener guide X-460-F8 assy, 1x Cleaning kit DX 460, 1x Case, 6000x Univer- 1 pc
sal nail X-U 52 P8 S36, 6000x DX cartridge 6,8/11 M yellow
3518290
X-CT 47 MX
Concrete
3.7 mm
Yellow Pole Tool Combo 6000x Universal nail X-U 52 P8 S36, 6000x DX cartridge 6,8/11 M yellow, 2x Pipe X-PT 1M/3FT RBR 1 pc
6000x Universal nail X-U 52 P8 S36, 6000x DX cartridge 6,8/11 M red, 2x Pipe X-PT 1M/3FT RBR
1 pc
3518433
1x Piston X460P8, 1x Fastener guide X-460-F8 assy, 1x Cleaning kit DX 460, 1x Case
1 pc
3518292
305170
■
■
■
■
12 - 72 mm
Weight
3.5 kg
Dimensions
(LxWxH)
Base materials
467 x 72 x 180 mm
Certificates
CE
Package contents
DX 460 MX 72
1x Nail magazine MX 72 assy, 1x Piston X460P8, 1x Cleaning kit DX 460, 1x Case
158
Ordering
designation
X-FS MX
Fastener length
range
Fastener intake
383585
383586
383587
Sales pack
quantity
1000 pc
Item number
383588
Forming spacer X-FS
X-FS C52
325 J
383583
Forming nail X-CT MX
Base materials
Power (max.)
383582
100 pc
Powder-actuated tool DX 460 MX 72
Item number
100 pc
3518291
Fastening wood to concrete, sand-lime
block masonry or steel
Fastening sheet metal to concrete,
sand-lime block or steel
Attaching drainage foils and membranes to concrete or CMU block
Fully automatic
High fastening rate, low overall in-place
cost
50354
100 pc
1x Piston X460P8, 1x Fastener guide X-460-F8 assy, 1x Cleaning kit DX 460, 1x Case, 6000x Univer- 1 pc
sal nail X-U 52 P8 S36, 6000x DX cartridge 6,8/11 M red
■
50352
100 pc
Red Mining Combo
Technical data
50353
Base materials
X-CT 47 DP8
Package contents
100 pc
100 pc
DX 460 F8
50351
X-CT 97 DP8
Red Pole Tool Combo
100 pc
Forming nail X-CT DP8
X-CT 72 DP8
Yellow Mining Combo
Item number
100 pc
6,8/11 M red
Concrete, Steel
Sales pack
quantity
Sales pack
quantity
Base
materials
Concrete
Fasten- Fastener
er shank shank
length
diameter
Concrete 52 mm
3.5 mm
3.5 mm
Washer
size
50 mm
50 mm
Corrosion
protection
Diameter Material
composition
Fastening element: zinc-coated 5-13 µm
50 mm
50 mm
Polyethylene
Polyethylene
Sales pack
quantity
100 pc
100 pc
Item
number
408022
407346
7
10 nails
700 / h
Concrete, Steel
Sales pack
quantity
1 pc
Item number
371668
159
Direct Fastening
Direct Fastening
Premium nail for concrete and steel X-U P8
DX 460 MX 72
Base materials
COMBO SINGLE TWIN PACK
Concrete, Concrete block, Some types of sand-lime block, Steel 1 pc
COMBO DX460 + X-U72 P8 S36 NAIL
Sales
pack
quantity
Combo Pole tool, 72mm nail & yellow cart Concrete, Concrete block, Some types of sand-lime block, Steel 1 pc
Combo Pole tool, 72mm nail & red cartrid
Combo 3 XU nail, cartridge & DX 36 M
DX 36
DX 36
DX 36
DX 36
DX 36
DX 460 F8
DX 460 F8
DX 460 F8
X-U 27 P8
X-U 27 P8
X-U 27 P8
X-U 27 P8
X-U 27 P8
X-U 16 P8
X-U 16 P8
X-U 16 P8
Mining combo 18000 Yellow
Mining combo 18000 Red
X-U 22 P8
X-U 27 P8
Concrete
100 pc
Concrete
X-U 15 P8 TH
100 pc
X-U 16 P8
Steel
X-U 19 P8
100 pc
Steel
X-U 32 P8
100 pc
Steel, Concrete
X-U 37 P8
100 pc
Steel, Concrete
X-U 42 P8
100 pc
Steel, Concrete
X-U 47 P8
100 pc
Steel, Concrete
X-U 52 P8
100 pc
Steel, Concrete
X-U 57 P8
100 pc
Steel, Concrete
X-U 62 P8
100 pc
Steel, Concrete
X-U 72 P8
100 pc
Steel, Concrete
100 pc
Item
number
DX 460 MX 72
3441577
3467353
DX 460 MX 72
3470744
3470745
3472332
DX 460 MX 72 kit
3472903
3472904
3480331
5000 X-U DX combo with TE1
3480333
5000 X-U DX combo with Grinder
3480332
3480343
3480344
10000 X-U DX combo with TE1
3480345
3472900
3472901
10000 X-U DX combo with Grinder
3472902
3480329
X-U 27 MX
3480330
3480340
3480341
X-U 27 MX
3480342
3515742
3516083
X-U 27 MX
237332
237333
237328
X-U 16 MX
237331
X-U 16 MX
237330
237334
237335
237336
X-U 16 MX
237337
237338
X-U 22 MX
237339
X-U 27 MX
237340
X-U 16 MX
237342
Premium nail with steel washer, for concrete and steel X-U P8 S
X-U 27 P8 S15
X-U 32 P8 S15
X-U 32 P8 S36
Base materials
Steel, Concrete
Steel, Concrete
Steel, Concrete
4 mm
4 mm
Sales pack quantity
237371
X-U 47 MX
237374
X-U 57 MX
237372
100 pc
4 mm
100 pc
X-U 52 MX
X-U 62 MX
Premium collated nail for concrete and steel X-U MX
Base materials
COMBO MX TWIN PACK
Concrete, Concrete
block, Steel, Some types
of sand-lime block
COMBO 2 DX 460 MX
Fastener shank diameter Sales pack
quantity
1 pc
X-U 72 MX
Concrete, Concrete
of sand-lime block
1 pc
3472913
Concrete, Concrete
of sand-lime block
1 pc
3472915
Combo 1 XU Nail MX, cartridge & DX460 MX Concrete, Concrete
of sand-lime block
1 pc
3472916
Combo 2 XU Nail MX, cartridge & DX460 MX Concrete, Concrete
of sand-lime block
1 pc
3472917
Combo DX460 + Carts + Nails X-U 27MX
1 pc
3480337
DX 460 MX 72
1 pc
3480338
Combo 3 XU Nail MX & cartridge
160
Concrete, Concrete
of sand-lime block
Concrete, Concrete
of sand-lime block
3480339
Concrete, Concrete
of sand-lime block
1 pc
3480350
Concrete, Concrete
of sand-lime block
1 pc
3480351
Concrete, Concrete
of sand-lime block
1 pc
3490273
Concrete, Concrete
of sand-lime block
1 pc
3505568
Concrete, Concrete
of sand-lime block
1 pc
3505569
Concrete, Concrete
of sand-lime block
1 pc
3505570
Concrete, Concrete
of sand-lime block
1 pc
3505571
Concrete, Concrete
of sand-lime block
100 pc
3480334
Concrete, Concrete
of sand-lime block
100 pc
3480335
Concrete, Concrete
of sand-lime block
100 pc
3480336
Concrete, Concrete
of sand-lime block
100 pc
3480346
Concrete, Concrete
of sand-lime block
100 pc
3480347
Concrete, Concrete
of sand-lime block
100 pc
3480348
Concrete
Concrete
4 mm
4 mm
Steel
4 mm
Steel
Steel, Concrete
Steel, Concrete
Steel, Concrete
Steel, Concrete
Steel, Concrete
Steel, Concrete
Steel, Concrete
Steel, Concrete
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
237346
100 pc
237347
100 pc
237344
100 pc
237345
100 pc
237348
100 pc
237349
100 pc
237350
100 pc
237351
100 pc
237352
100 pc
237353
100 pc
237354
100 pc
237356
100 pc
■
Fastening FB clips, punched band, light
fixtures etc. on medium-hard concrete
Technical data
Fastener length
range
Fastener intake
14 - 50 mm
Weight
0.36 kg
Base materials
Concrete
Single
Sales pack
quantity
BD1
7
Hand-drive tool BD1
3441576
3441631
Combo 1 XU Nail MX & cartridge
1 pc
Item number
1 pc
Concrete, Concrete
of sand-lime block
X-U 32 MX
X-U 37 MX
X-U 42 MX
Item number
100 pc
X-U 19 MX
Concrete, Concrete
of sand-lime block
1 pc
Item number
10048
161
Direct Fastening
Direct Fastening
Micky pin with steel washer PN nails
PN 525R
PN 530R
Base materials
Concrete
2.5 mm
Concrete
PN 540R
2.5 mm
Concrete
PN 514R
PN 518R
Item number
■
40358
40361
40351
500 pc
2.5 mm
40357
200 pc
200 pc
2.5 mm
Concrete
Sales pack quantity
200 pc
2.5 mm
Concrete
Powder-actuated marking tool DX 462 HM
40353
500 pc
Steel washers for use with nails Steel washers
Sales pack quantity
R23
100 pc
R36
■
■
Item number
51741
50 pc
51731
■
Marking hot materials at a temperature
of up to 800°C, marking castings in
a wide variety of shapes and types,
marking all parts presently marked
using a hammer and punches, marking
items outside their normal production
locations
Marking on steel surfaces
Fully automatic piston return and
cartridge advance achieves a higher
marking rate without need to manually
cycle the tool
Total mobility and complete independence from electrical power supplies
Technical data
Weight
4.62 kg
Dimensions
(LxWxH)
Base materials
425 x 72 x 180 mm
700 / h
Steel
Operating tempera- -15 - 50 °C
ture range
Ceiling hanger X-HS M P8 S15
Ordering
designation
Base
materials
X-HS M8 U32
P8 S15
Concrete
X-HS M10 U32
P8 S15
X-HS M8 U19
P8 S15
X-HS M10 U19
P8 S15
Fastener
shank
length
Corrosion
protection
32 mm
Zinc-coated Indoor, dry
conditions
Concrete
32 mm
conditions
Steel
19 mm
conditions
Steel
19 mm
Environmental
conditions
conditions
Sales pack
quantity
Nail: carbon steel, Zinc coating
5-13 µm, Fixation element: galvanized steel sheet
100 pc
361789
100 pc
361790
100 pc
386214
Item number
Package contents
DX 462 HM
1x Marking head X-462-HM, 1x Piston X-462-PM, 1x Cleaning kit DX 460, 1x Spares pack HM 1, 1x Case
Sales pack
quantity
1 pc
Item number
376376
Marking head X-462
Sales pack
quantity
X-462-CM
1 pc
X-462-HM
386215
100 pc
1 pc
Item number
282319
282320
7
Marking character (narrow high-stress) X-MC S 5.6/10
Ceiling hanger X-CC
Ordering
designation
Base materials
Fastener
shank
length
Fastener
shank
diameter
Washer
size
X-CC U22 P8 Concrete, Lightweight 22 mm
concrete, Concrete
over metal deck
4 mm
8 mm
X-CC U27 P8 Concrete, Lightweight 27 mm
concrete, Concrete
over metal deck
4 mm
8 mm
Corrosion
protection
Zinccoated
5-13
µm
Zinccoated
5-13
µm
Environmental
conditions
Material
composition
Sales pack
quantity
Item
number
Indoor, dry
conditions
Galvanized
steel
100 pc
386229
Indoor, dry
conditions
Galvanized
steel
100 pc
Character font height
Width
X-MC S 5.6/10 0-9 set
10 mm
6 mm
X-MC S 5.6/10 A-Z set
386230
Width
X-MC S 8/12 0
12 mm
8 mm
X-MC S 8/12 2
12 mm
8 mm
X-MC S 8/12 1
X-MC S 8/12 3
X-MC S 8/12 5
X-MC S 8/12 6
Pole tools and accessories X-PT
X-MC S 8/12 7
Sales pack quantity
Pole tool combo 18000 Yellow
100 pc
COMBO Minning 7ft Rubberised pole tool
Pipe X-PT 3FT
Pole tool X-PT 460 7FT assy
Grip section X-PT RBR
1 pc
1 pc
1 pc
1 pc
Item number
X-MC S 8/12 8
3523998
X-MC S 8/12 A
371661
X-MC S 8/12 C
3465506
X-MC S 8/12 9
254684
X-MC S 8/12 B
423683
X-MC S 8/12 D
X-MC S 8/12 E
X-MC S 8/12 F
X-MC S 8/12 G
X-MC S 8/12 H
X-MC S 8/12 I
X-MC S 8/12 J
X-MC S 8/12 K
X-MC S 8/12 L
X-MC S 8/12 M
X-MC S 8/12 N
X-MC S 8/12 O
X-MC S 8/12 P
X-MC S 8/12 Q
X-MC S 8/12 R
X-MC S 8/12 S
162
6 mm
1 pc
1 pc
Item number
7621
7622
Marking character (wide high stress) X-MC S 8/12
X-MC S 8/12 4
10 mm
Sales pack
quantity
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
Sales pack
quantity
Item number
1 pc
7302
1 pc
7304
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
7303
7305
7306
7307
7308
7309
7310
7311
7312
7313
7314
7315
7316
7317
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
163
Direct Fastening
Direct Fastening
X-MC S 8/12 T
12 mm
8 mm
1 pc
7331
X-MC S 8/12 V
12 mm
8 mm
1 pc
7333
X-MC S 8/12 U
X-MC S 8/12 W
X-MC S 8/12 X
X-MC S 8/12 Y
X-MC S 8/12 Z
X-MC S 8/12 0-9 set
X-MC S 8/12 A-Z set
12 mm
8 mm
12 mm
8 mm
12 mm
8 mm
12 mm
8 mm
12 mm
8 mm
12 mm
8 mm
12 mm
8 mm
Powder-actuated tool DX 460-GR
7332
1 pc
■
7334
1 pc
7335
1 pc
7336
1 pc
7337
1 pc
7745
1 pc
■
■
■
7746
1 pc
Marking character (additional wide) X-MC 8
Width
X-MC 8,0 space
8 mm
Sales pack
quantity
Fastening gratings to steel structures
for all types of buildings and plants:
refineries, chemical plants, offshore
platforms, civil engineering and industrial construction
Power plants
Warehouses
Fast, economical and convenient: up
to 120 grating fastenings per hour by
one user
Total mobility and complete independence from electrical power supplies
(no cables)
Item number
■
7747
1 pc
Technical data
Power (max.)
325 J
Fastener intake
Single
Weight
3.85 kg
Dimensions
(LxWxH)
Base materials
478 x 72 x 180 mm
Certificates
CE
Concrete, Steel
Marking character (additional narrow) X-MC 5.6
Width
X-MC 5,6 space
6 mm
Sales pack
quantity
1 pc
Item number
7084
X-MC S 8/10 0-9 set
X-MC S 8/10 A-Z set
10 mm
10 mm
Width
8 mm
8 mm
Sales pack
quantity
1 pc
1 pc
Item number
Width
X-MC LS 8/10 A-Z set
10 mm
8 mm
X-MC LS 8/10 0-9 set
10 mm
8 mm
7743
7744
Width
X-MC LS 5.6/6 A-Z set
6 mm
6 mm
X-MC LS 5.6/6 0
6 mm
6 mm
1x Piston X-460-PGR, 1x Fastener guide X-460-FGR assy, 1x Cleaning kit DX 460, 1x Case
Sales pack
quantity
1 pc
Item number
304389
Sales pack
quantity
1 pc
1 pc
Sales pack
quantity
1 pc
1 pc
Thread length
Fastener shank length
X-CR M8-9-12 P8
9 mm
12 mm
15 mm
Sales pack
quantity
Item number
372031
100 pc
12 mm
372033
100 pc
Item number
Thread length
Fastener shank length
X-CR M8-9-12 FP10
9 mm
12 mm
X-CR M8-15-12 FP10
373523
373524
15 mm
Sales pack
quantity
372032
100 pc
12 mm
7
Item number
372034
100 pc
Grating disc (duplex coated) X-FCM-M
Marking character (narrow low-stress) X-MC LS 5.6/6
DX 460 GR
X-CR M8-15-12 P8
Marking character (wide, low-stress letters) X-MC LS 8/10
Package contents
Marking character X-MC S 8/10
Ordering
designation
Item number
Base
materials
X-FCM-M 1” - Steel
1 1/4” L
8115
8116
Diameter Environmental
conditions
Grating
height
50 mm
25 - 50 mm 8 Nm
Indoors or mildly corrosive environment
Max.
tightening
torque
Sales
pack
quantity
50 pc
Item
number
2042852
Marking character (narrow high-stress letters) X-MC S 5.6/6
Width
X-MC S 5.6/6 0
6 mm
6 mm
X-MC S 5.6/6 B
6 mm
6 mm
X-MC S 5.6/6 9
X-MC S 5.6/6 T
X-MC S 5.6/6 0-9 set
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
Sales pack
quantity
Item number
1 pc
7545
1 pc
7556
1 pc
1 pc
1 pc
Sealing ring X-FCP
7554
7574
7619
Width
X-MC MS 8/10 0-9 set
10 mm
8 mm
X-MC MS 8/10 A-Z set
164
10 mm
8 mm
Sales pack
quantity
1 pc
1 pc
X-FCP
39 mm
Neoprene
Ordering
designation
Item number
X-FCP-F 5/10
7777
7778
Diameter
Sales pack
quantity
Item number
308856
200 pc
Grating disc HDG X-FCP-F
Marking character (wide mini-stress) X-MC MS 8/10
Base
materials
Steel
conditions
45 mm
Indoors or
mildly corrosive
environment
Grating
height
5 - 13
mm
Max. tightening torque
8 Nm
Sales pack
quantity
Item
number
200 pc
308859
Sales pack
quantity
Item
number
200 pc
308860
Grating disc (stainless steel) X-FCP-R
Ordering
designation
Base
materials
conditions
X-FCP-R 5/10
Steel
45 mm
Grating height Max.
tightening
torque
Marine, offshore, 5 - 13 mm
petrochemical,
power plants,
etc.
8 Nm
165
Direct Fastening
Direct Fastening
Grating disc X-GR RU P8
Ordering
designation
Base
materials
Environmental conditions
X-GR RU 35/40
CR20 P8
Steel
X-GR RU 25/30
CR20 P8
Steel
Threaded stud (for coated steel, metric) X-BT M6
Grating height Max. tightening torque
25 - 30 mm
5 Nm
Sales pack
quantity
Item
number
100 pc
384239
35 - 40 mm
5 Nm
100 pc
384240
■
■
■
■
Fastening gratings using the X-BT M8
fastener
Fastening to coated steel in corrosive
environments using 8 mm threaded
studs
A quick, easy and reliable fastening
solution that eliminates the need for
subsequent finishing
Ideal for use on high-strength coated
steel, 8 mm or thicker
Thread diameter
X-BT M6-24-6 SN12-R
6 mm
Sales pack
quantity
100 pc
Item number
432266
Threaded stud (for coated steel, metric) X-BT M10
Powder-actuated tool DX 351-BTG
Technical data
Power (max.)
85 J
Fastener length
range
Fastener intake
21 - 21 mm
Weight
2.36 kg
Dimensions
(LxWxH)
Base materials
431 x 56 x 164 mm
Certificates
CE
Package contents
Threaded stud
700 / h
DX 351 BT G
1x Piston X-351 BT P G, 1x Fastener guide X-351 BT FG G assy, 1x Cleaning kit DX 351, 1x Case
1 pc
X-BT M10-24-6 SN12-R
10 mm
Sales pack
quantity
Item number
Sales pack
quantity
Item number
100 pc
Base materials
X-CR 16 P8
Concrete, Steel
3.7 mm
X-CR 18 P8
X-CR 21 P8
100 pc
3.7 mm
377078
247358
100 pc
247361
100 pc
X-CR 14 P8
Concrete, Steel
3.7 mm
100 pc
X-CR 44P8
Concrete, Steel
Concrete, Steel
Concrete, Steel
Concrete, Steel
3.7 mm
4 mm
100 pc
4 mm
100 pc
4 mm
247356
247357
100 pc
3.7 mm
X-CR 54 P8
377624
Concrete, Steel
100 pc
3.7 mm
Concrete, Steel
X-CR 39 P8
Item number
Concrete, Steel
X-CR 29 P8
X-CR 34 P8
Steel
Sales pack
quantity
Thread diameter
Universal nail X-CR P8
ture range
100 pc
247360
306701
247362
247363
247429
Threaded stud (for concrete - 8mm washer) X-CR M8 P8
Thread diameter Thread length Fastener shank
length
X-CR M8-14-42 P8 8 mm
X-CR M8-22-42 P8 8 mm
14 mm
22 mm
42 mm
42 mm
Sales pack
quantity
100 pc
100 pc
Item number
255911
255910
Cordless drill X-BT 4000-A
■
■
■
For use with the X-BT system for
coated, painted and high-strength steel
applications
Cordless high speed drill exclusively
designed for the X-BT fastening system
Great drilling performance on steel with
small-diameter bits
7
Technical data
Max. torque
6 Nm
A-weighted emission sound pressure level1)
Weight according
to EPTA Procedure
01/2003
Uncertainty for the
given sound level1)
A-weighted emission sound power
level1)
Approvals
75 dB (A)
Chuck type
Keyless chuck, up to
13 mm
Height
Package contents
XBT 4000-A
1x Cordless drill XBT 4000-A
3 dB (A)
86 dB (A)
Acc. to EN 55014-2
250 mm
Interference
immunity
Mains frequency
1)
3 kg
Yes
60 Hz
according to EN 60745
Sales pack
quantity
1 pc
Item number
378266
Threaded stud for coated steel X-BT M8
Thread diameter
X-BT M8-15-6 SN12-R
8 mm
166
Sales pack
quantity
100 pc
Item number
377074
167
Direct Fastening
Direct Fastening
Semi-automatic powder-actuated tool DX 76-PTR
■
Fastening siding and roofing profile
metal sheets, liner trays and steel composite systems on steel supports
For use on steel with a thickness of 6
mm or greater
Innovative PTR (punch through resistance) system plus the well-proven
piston principle ensure maximum safety
for users and bystanders
High fastening quality even on thin
substructures
■
■
■
Technical data
Length
Corrosion protection
Dimensions (LxWxH)
Height
Width
X-HVB 125
0m
Zinc coated > 3 µm
63 x 31 x 128 mm
128 mm
Carbon steel Rm = 295-350 N/m2
31 mm
X-HVB 140
Fastener length
range
Fastener intake
19 - 21 mm
Weight
4.4 kg
Dimensions
(LxWxH)
Base materials
464 x 104 x 352 mm
Certificates
CE
0m
1x Piston X-76-P-PTR X-ENP, 1x Nail magazine MX 76 PTR assy, 1x Cleaning kit DX 76/860, 1x Check
gauge DX 76 PTR, 1x Case
Steel, Concrete
Base materials
X-ENP-21 HVB
Steel
4.5 mm
Sales pack
quantity
1 pc
Item number
388219
6,8/18 M black
6.8/18 M10 STD green
X-ENP2K-20 L15 MX
Steel
3.7 mm
31 mm
125 pc
120 pc
348181
348321
Sales pack
quantity
1000 pc
Sales pack
quantity
100 pc
Item number
283512
Item number
385134
Sheet metal nail X-ENP2K
Sales pack
quantity
100 pc
Item number
50604
DX Clean-Tec cartridges 6.8/18 M10
Base materials
DX cartridges 6.8/18 M10
Sheet metal nail X-ENP2K MX
142 mm
600 / h
DX 76 PTR
63 x 31 x 142 mm
Item number
Sheet metal nail X-ENP HVB
10 nails
ture range
Ordering designation Package contents
Zinc coated > 3 µm
Sales pack
quantity
6.8/18 M10 STD yellow
6.8/18 M10 STD red
6.8/18 M10 STD black
6.8/18 M10 BULK red
Sales pack
quantity
100 pc
100 pc
100 pc
100 pc
1000 pc
Item number
416482
416483
416484
416486
416489
7
Base materials
X-ENP2K-20 L15
Steel
3.7 mm
Sales pack
quantity
Item number
Sales pack
quantity
Item number
100 pc
385133
Nail X-ENP MX
X-ENP-19 L15MX
4.5 mm
1000 pc
Item number
X-ENP-19 L15
4.5 mm
Sales pack
quantity
Sales pack
quantity
Item number
283507
Single nail X-ENP
100 pc
283506
Shear connector X-HVB
Length
Corrosion protection
Dimensions (LxWxH)
Height
Width
X-HVB 80
0m
Zinc coated > 3 µm
60 x 24 x 80 mm
80 mm
24 mm
X-HVB 110
0m
Zinc coated > 3 µm
63 x 31 x 112 mm
112 mm
31 mm
X-HVB 95
168
0m
Zinc coated > 3 µm
60 x 24 x 95 mm
95 mm
24 mm
250 pc
239357
200 pc
348180
200 pc
348179
169

Direct Fastening Chapter 4094.7kB

Transcription

Similar documents

Hilti 2014 PRICE LIST

Hilti 2015 PRICE LIST

Hilti 2015 PRICE LIST

Thread technology for high-strength fastenings – metric threads

Thread inserts for high strength fastenings Simple – fast

Helicoil plus - Colly Components NO