Consortium Products Handbook - NATO SEASPARROW Surface

Transcription

NATO Seasparrow
Consortium Products Handbook
Approved By:
_______________________________________________
A. Pedersen, CAPT, RDN
NATO Seasparrow Project Office
Deputy Project Manager (Military)
NSPO-CPH-0001
Rev 1
RECORD OF CHANGES
REVISION
NUMBER OF PAGES
CHANGED
--
N/A
1 May 2008
1
7 (Added MK 6 LLLTV)
27 May 2008
AUTHORIZATION
DATE
NSPO-CPH-0001
Rev 1
TABLE OF CONTENTS
1.0
Introduction. ............................................................................................................ 1
2.0
Products Overview. ................................................................................................. 1
2.0.1.
RIM-7 Seasparrow Missile.............................................................................. 2
2.0.2.
RIM-162 Evolved Seasparrow Missile (ESSM............................................... 2
2.1
Surface Missile Systems/Fire Control Systems. ..................................................... 2
2.1.1
MK 57 NATO Seasparrow Surface Missile System (NSSMS). ..................... 2
2.1.1.1 MK 57 NSSMS Variants Overview............................................................ 2
2.1.2
Dutch Configuration Fire Control System....................................................... 3
2.2
Launching Systems. ................................................................................................ 3
2.2.1
MK 29 Guided Missile Launching System (GMLS)....................................... 3
2.2.2
MK 48 Guided Missile Vertical Launching System (GMVLS)...................... 3
2.2.3
MK 56 Mod 0 Guided Missile Vertical Launching System (GMVLS). ......... 4
2.2.4
MK 41 Vertical Launching System (VLS)...................................................... 4
2.3
Missile Canisters. .................................................................................................... 4
2.3.1
MK 20 Canister. .............................................................................................. 4
2.3.2
MK 25 Quad Pack. .......................................................................................... 4
2.3.3
Composite Dual Pack. ..................................................................................... 4
2.4
WCU-16A/B Jet Vane Controller (JVC). ............................................................... 4
2.5
CW Illuminators...................................................................................................... 4
2.5.1
MK 73 Mod 1 Transmitter............................................................................... 5
2.5.2
MK 73 Mod 3 Solid State Tranmsitter. ........................................................... 5
2.6
MK 6 Mod 2 Low Light Level Television (LLLTV). ............................................ 5
2.7
Special Purpose Test Equipment............................................................................ 5
3.0
Consortium Memorandums of Understandings & Required Approvals................. 7
4.0
FMS Process Overview and Requirements............................................................. 8
5.0
Direct Commercial Sales Process Overview and Requirements............................. 9
6.0
Ship Transfers Overview....................................................................................... 10
7.0
NSSMS Follow On Support Agent....................................................................... 10
8.0
In-Service Products and Services Overview. ........................................................ 11
8.1
Seasparrow Missile Variants................................................................................. 13
8.1.1.
RIM-7 Seasparrow Missile............................................................................ 13
8.1.1.1 Seasparrow Training ................................................................................. 13
8.1.1.2 Seasparrow Technical Documentation...................................................... 13
8.1.1.3 Seasparrow Integrated Logistics Maintenance Facility (ILMF) ............... 14
8.1.2.
RIM-162 Evolved Seasparrow Missile (ESSM). .......................................... 14
8.1.2.1 ESSM Training. ........................................................................................ 14
8.1.2.2 ESSM Technical Documentation.............................................................. 16
8.1.2.3 ESSM Integrated Logistics Maintenance Facility (ILMF). ...................... 18
8.1.2.4 ESSM Support Equipment. ....................................................................... 18
8.2
Fire Control Systems............................................................................................. 19
8.2.1
MK 57 Mod 2-13 NSSMS............................................................................. 19
8.2.1.1 MK 57 Parts Support................................................................................. 19
8.2.1.2 MK 57 Training. ....................................................................................... 19
8.2.1.3 MK 57 Installation & Checkout................................................................ 20
i
NSPO-CPH-0001
Rev 1
8.2.1.4 MK 57 Technical Documentation............................................................. 20
8.2.1.5 MK 57 Planned Maintenance System (PMS). .......................................... 20
8.2.1.6 MK 57 Special Purpose Electronic Test Equipment (SPETE) ................. 20
8.2.1.7 MK 57 Material Condition Assessment (MCA) / Overhaul Support ....... 21
8.2.2
Cluster I - III Dutch Configuration (DC) Fire Control System. .................... 21
8.2.2.1 DCFCS Support Elements. ....................................................................... 21
8.3
Seasparrow Launching Systems............................................................................ 22
8.3.1
MK 29 GMLS................................................................................................ 22
8.3.1.1 MK 29 Parts Support................................................................................. 22
8.3.1.2 MK 29 Training. ....................................................................................... 22
8.3.1.6 MK 29 Special Purpose Electronic Test Equipment (SPETE). ................ 23
8.3.1.7 MK 29 Overhaul Support.......................................................................... 24
8.3.2
MK 48 Guided Missile Vertical Launching System (GMVLS).................... 24
8.3.2.1 MK 48 Parts Support................................................................................. 24
8.3.2.2 MK 48 Training. ....................................................................................... 24
8.3.3
MK 56 Guided Missile Vertical Launching System (GMVLS).................... 25
8.3.3.1 MK 56 Parts Support................................................................................. 25
8.3.3.2 MK 56 Training. ....................................................................................... 26
8.4
Missile Canisters. .................................................................................................. 26
8.4.1
MK 20 Canister. ............................................................................................ 26
8.5
Jet Vane Controller (JVC)..................................................................................... 26
8.5.1
JVC Training. ................................................................................................ 26
8.5.2
JVC Technical Documentation...................................................................... 27
8.5.3
JVC Planned Maintenance System (PMS). ................................................... 27
8.5.4
JVC Overhaul Support................................................................................... 27
8.6
MK 73 Mod 1 Transmitter (CW Illuminators). .................................................... 27
8.6.1
MK 73 Parts Support. .................................................................................... 27
8.6.2
MK 73 Training. ............................................................................................ 27
8.6.3
MK 73 Installation & Checkout. ................................................................... 28
8.6.4
MK 73 Technical Documentation. ................................................................ 28
8.6.5
MK 73 Planned Maintenance System (PMS)................................................ 28
8.6.6
MK 73 Special Purpose Electronic Test Equipment (SPETE)...................... 28
8.6.7
MK 73 Overhaul Support. ............................................................................. 28
8.7
MK 6 Mod 2 Low Light Level Television System (LLLTV)............................... 28
ii
NSPO-CPH-0001
Rev 1
8.7.1
MK 6 LLLTV Part Support ........................................................................... 28
8.7.2
MK 6 LLLTV Training ................................................................................. 28
8.7.3
MK 6 LLLTV Installation & Checkout......................................................... 29
8.7.4
MK 6 LLLTV Technical Documentation...................................................... 29
8.7.5
MK 6 LLLTV Planned Maintenance System (PMS). ................................... 29
8.7.6
MK 6 LLLTV Special Purpose Support Equipment. .................................... 29
8.7.7
Overhaul Support........................................................................................... 29
9.0
Points of Contact................................................................................................... 30
10.0 Glossary of Terms. ................................................................................................ 31
LIST OF TABLES
Table 2.0
Table 2.7
Table 8.0
Table 8.1.1.1
Table 8.1.2.1
Table 8.1.2.2
Table 8.1.2.3
Table 8.1.2.4
Table 8.2.1.2
Table 8.2.1.5
Table 8.3.1.2
Table 8.3.1.5
Table 8.3.2.2
Table 8.5.1
Table 8.6.2
Table 8.6.5
Table 8.7.5
Table 9.0
Table 10.0
NATO SEASPARROW Consortium Product Line .................................... 1
NATO SEASPARROW Special Purpose Test Equipment......................... 5
SEASPARROW Equipment Three Phase Support Approach .................. 12
SEASPARROW Missile Training Courses .............................................. 13
ESSM Training Courses............................................................................ 14
ESSM Technical Documentation.............................................................. 16
ESSM ILMFs ............................................................................................ 18
ESSM Support Equipment ........................................................................ 19
MK 57 Mod 2-13 NSSMS Training Courses............................................ 20
MK 57 Mod 2-13 NSSMS PMS ............................................................... 20
MK 29 GMLS Training Courses............................................................... 23
MK 29 GMLS PMS .................................................................................. 23
MK 48 GMVLS Training Courses............................................................ 24
JVC Training Courses ............................................................................... 27
MK 73 Transmitter Training Courses ....................................................... 27
MK 73 Transmitter PMS........................................................................... 28
MK 6 LLLTV PMS................................................................................... 29
Points Of Contact ...................................................................................... 30
Terms/Acronyms....................................................................................... 31
LIST OF FIGURES
Figure 7.0
FOSA Use Overview ................................................................................ 10
APPENDICES
Appendix A
Generic Letter For A Prospective Customer............................................. 34
iii
NSPO-CPH-0001
Rev -1
1.0 Introduction. The purpose of this document is to provide an overview of all NATO
Seasparrow Consortium products and services that are available to non-consortium nations
related to the control and support of the Seasparrow and Evolved Seasparrow Missiles.
This handbook also describes the procurement alternatives available to non
consortium nations for purchasing Consortium products and services detailed in
this handbook. NOTE: The NATO Seasparrow Project Office recommends the
use of Consortium Industry and equipments that have successfully demonstrated
expertise and previous support experience with Consortium Equipments and the
Seasparrow or Evolved Seasparrow Missiles.
2.0 Products Overview. The NATO Seasparrow Consortium has a full range of systems
and equipment developed to support the Seasparrow and Evolved Seasparrow missile
variants. Table 2.0 identifies the major configuration items that are designated as approved
Consortium product lines. The subsequent paragraphs provide an overview of each
product line.
TABLE 2.0 – NATO SEASPARROW CONSORTIUM PRODUCT LINE
DESIGNATOR
RIM-7
NAME
Seasparrow Missile
RIM-162
Evolved Seasparrow Missile
(ESSM)
MK 57 Mod 2-13
DC I-III
MK 29 Mod 1-5
NATO Seasparrow Surface Missile
System (NSSMS)
Dutch Configuration Fire Control
System (FCS)
Guided Missile Launching System
(GMLS)
MK 25 Quad Pack
Guided Missile Vertical Launching
System (GMVLS)
System (GMVLS)
Missile Launch Controller
System (GMVLS)
Missile Canister
N/A
Composite Dual Pack Canister
WCU-16A/B
MK 73 Mod 1-3
Jet Vane Controller (JVC)
CW Transmitter
MK 6 Mod 2
Low Light Level Television
MK 48 Mod 0
MK 48 Mod 1-5
MK 220 Mod 1
MK 56 Mod 0/1
1
REMARKS
Managed by the USN
Variants A-E are available,
dependant on the Launching
System used.
For RIM-7 and RIM-162
Missiles.
Trainable Launching System
for RIM-7 and RIM-162
Missiles.
Vertical Launcher used with
the RIM-7 Missile.
For RIM-7 and RIM-162
Missiles.
For RIM-162E Missile.
For use with the MK 41 VLS
For use with the MK 56
GMVLS.
Currently only used in
conjunction with the MK 57
NSSMS
NSPO-CPH-0001
Rev -1
2.0.1 RIM-7 Seasparrow Missile. The Seasparrow Missile is a short to medium
range all-weather, all-environment missile designed primarily for the ship self
defense role. Later variants of the Seasparrow Missile also contain a very
capable low altitude air and surface target capability. The Seasparrow Missile is
found aboard ships of the NATO Seasparrow Consortium and other allied nations
around the world. To support testing exercises, applicable Telemetry versions of
the RIM-7 are available. The Seasparrow Missile is being replaced by most
nations in the Consortium with the more capable Evolved Seasparrow Missile.
2.0.2 RIM-162 Evolved Seasparrow Missile (ESSM). The Evolved Seasparrow Missile
is a medium range all weather, all-environment missile designed to provide ship self
defense against air and surface targets. ESSM operates with a wide range of existing
and future Combat Systems. For compatibility with the existing Seasparrow
infrastructure, ESSM is required to operate with Continuous Wave (CW) Home All
the Way (HAW) systems. This includes the U.S. Navy MK 57 NATO Seasparrow
Surface Missile System (NSSMS), Dutch Clusters III and IV, the Danish STANFLEX
and the Australian ANZAC 9LV453 and FFG Australian Distributed Architecture
Combat System (ADACS) combat systems. ESSM is also compatible with the
AEGIS Combat System and APAR. A wide range of launchers including the MK 48
GMVLS, MK 41 VLS and MK 56 GMVLS are compatible with the ESSM.
2.1 Surface Missile Systems/Fire Control Systems. There are seven Consortium
products defined as Missile Systems or Fire Control Systems. These will be overviewed in
the subsequent paragraphs. In addition, there are other fire control systems known to be in
use with the Seasparrow/Evolved Seasparrow Missiles. Including, the CEROS Fire
Control System, MK 92 Mod 12 FCS, Anti Air Warfare Segment (AAWS), AEGIS and
APAR.
2.1.1 MK 57 NATO Seasparrow Surface Missile System (NSSMS). There are three
variants of the MK 57 in use today. All three variants are primarily used by
the USN in support of the Seasparrow or Evolved Seasparrow missile.
Each of these variants will be overviewed in the subsequent
paragraphs. Raytheon is the primary design agent of the MK 57
systems.
2.1.1.1 MK 57 NSSMS Variants Overview. All NSSMS MK 57
variants are all weather, all environment Anti-Ship Missile Defense
System. They are fully capable of unassisted target acquisition, track, missile/launcher
order preparation and missile firing when operated in the Automatic mode. The system is
capable of meeting the stringent late detect, or horizon detected time constraints for a
broad spectrum of current missile threats. The system also has a capable Surface Defense
capability. The designator and major differences between the various are:

MK 57 Mod 2/3 NSSMS. Legacy NSSMS variant that uses the Seasparrow
Missile.
2
NSPO-CPH-0001
Rev -1

MK 57 Mod 10/11 NSSMS. Re-Architectured NSSMS variant that uses the
Seasparrow Missile variant.

MK 57 Mod 12/13 NSSMS. Re-Architectured NSSMS that uses the Evolved
Seasparrow Missile.
2.1.2 Dutch Configuration Fire Control System. The Dutch Configuration Fire
Control Systems consist of the WM25/STIR family of systems manufactured by THALES,
(formally known as SIGNAAL). Each of these Fire Control Systems will have one or more
of the following hardware configurations:

WM25 Combined Antenna System (CAS)

STIR (Magnetron)

STIR (TWT)
In addition to the above hardware configurations, the DC systems are also divided into
three different clusters (or ship groups). These clusters are differentiated depending on the
generation of the Signaal Miniature Rekeneaar (SMR) computer and its peripherals, as
well as the level of integration between the Fire Control System and the ship's Combat
Management System.
2.2 Launching Systems. There are four Launching systems proven to be compatible with
the Seasparrow or Evolved Seasparrow missiles. Of these, three are part of the
Consortium‘s product line. The fourth, MK 41 VLS, utilizes a Consortium developed
Launch canister to fire ESSMs. The following paragraphs will overview the compatible
launcher variants.
2.2.1 MK 29 Guided Missile Launching System (GMLS). There are 5 variants of the
MK 29 GMLS. This launcher family provides on-mount
stowage and launching capability for firing up to eight
missiles in a self contained environmentally controlled
trainable launcher design. The MK 29 Mod 1-3 supports the
Seasparrow missile variants. The MK 29 mod 4/5 supports
the Evolved Seasparrow Missile.
2.2.2 MK 48 Guided Missile Vertical Launching System (GMVLS). There are 5
variants 0f the MK 48 GMVLS. The MK 48 GMVLS is an unmanned system
capable of launching Vertical Launch (VL) Seasparrow missiles with the Jet
Vane Control (JVC) from its vertically mounted MK 20 canisters. Later Mods
can launch the Evolved Seasparrow missile. This vertical launching system is
designed to interface with a variety of Fire Control Systems (FCS). Raytheon
is the design agent for the MK 48 GMVLS. The MK 48 Mod 0-3 variants are
configurable with up to 16 Seasparrow missiles (6 missiles in the case of the
3
NSPO-CPH-0001
Rev -1
modular Mod 3 configuration), available as a topside or in-deck installation. The MK 48
Mod 4/5 variants are configurable with up to 16 Evolved Seasparrow missiles, available as
a topside or in-deck installation.
2.2.3 MK 56 Mod 0 Guided Missile Vertical Launching System (GMVLS). The MK
56 Vertical Launcher is configurable with up to 16 Evolved Seasparrow
missiles depending on the Mod number, available as a topside or in-deck
installation. However, the MK 56 Mod 0 variant, part of NSPO support
program, is capable of launching 12 ESSM vertical launch missiles. The
launching system is remote-controlled and unmanned during launch
operation. The Mod 1 variant hosts 8 ESSMs.
2.2.4 MK 41 Vertical Launching System (VLS). The MK 41 is an in-deck VLS,
configurable in multiples of 8 cell modules. The MK 41 is used with both the Seasparrow
and RIM-162 missiles. When used with the Evolved Seasparrow, 4 missiles per cells can
be accommodated with the MK 25 Quad Pack Canister. Please note that the MK 41 is not
a Consortium Product. However, when used with the Seasparrow missile, the required
MK 220 Mod 1 MLC is.
2.3 Missile Canisters. There are three launch canisters that support the three vertical
launching systems as described below.
2.3.1 MK 20 Canister. The MK 20 is a single missile canister design with launch rail
used with the MK 48 GMVLS.
2.3.2 MK 25 Quad Pack. The MK 25 is a four missile canister design with
4 sub-cells used with the MK 41 VLS.
2.3.3 Composite Dual Pack. Composite design for single missile load out with launch
rail. This canister is referred to as “Dual Pack” because 2 ESSMs can fit into the same
space as a single MK 20 canister.
2.4 WCU-16A/B Jet Vane Controller (JVC). The JVC assembly contains four
hydraulically controlled vanes, a microprocessor and servo amplifier
assemblies. The JVC assembly is mounted to the exhaust end of the vertical
launch RIM-7 Sparrow missile MK 58 MOD 4 rocket motor with two
explosive bolts. The JVC receives and sends control signals from the missile guidance and
control section, and the shipboard missile launch control prior to launch to complete a bit
check and calculate the trajectory required for the missile to clear the ship. The JVC vane
motion causes thrust forces required to turn the missile body from a vertical orientation to
the desired flight trajectory during the initial seconds of flight. Following completion of
the initial missile pitch over, the JVC unit is jettisoned from the rocket motor by detonating
the two explosive mounting bolts.
2.5 CW Illuminators. There are five Continuous Wave (CW) Illuminators (Transmitters)
used with the Seasparrow and Evolved Seasparrow Missiles. Of these, two are considered
4
NSPO-CPH-0001
Rev -1
Consortium products and are described in the subsequent paragraphs. The other three
transmitters are the MK 93 MOD 0 MACWIT in use by the Royal Danish Navy and the
Solid State Continuous Wave Illuminators (SSCWI) in use by the Australian and UAE
Navy’s.
2.5.1 MK 73 Mod 1 Transmitter. The Mod 1 Transmitter is a self–contained set of four
cabinets whose purpose is to generate X–band microwave energy. The transmitter uses a
master oscillator/power amplifier chain and the single sideband generator principle to
provide 2 kW of modulated RF power. A liquid cooling system is used for primary
cooling.
2.5.2 MK 73 Mod 3 Solid State Transmitter. The solid state
variant of the MK 73 Transmitter Group utilizes the same four
cabinets as the Mod 1 Transmitter. However, the majority of
the internal circuits have been replaced with modern
technology, including solid state RF amplification and
processors.
Power output and most other performance
parameters are the same as the Mod 1 Transmitter with
dramatically improved reliability and significantly reduced
maintenance cost.
2.6
MK 6 Mod 2 Low Light Level Television (LLLTV). The
LLLTV is designed to be used as an adjunct sensor during all NSSMS
operational conditions in support of visual threat recognition, fire
control tracking during casualty states, detection and evaluation of
multiple threats, and kill/survive assessment during missile
engagements.
2.7
Special Purpose Test Equipment. There is a variety of test equipment used to
support the Consortium prime equipment products. These are overviewed in Table 2.7.
TABLE 2.7 – NATO SEASPARROW SPECIAL PURPOSE TEST EQUIPMENT
ITEM
AN/APM-383
Radar Test Set
(RTS)
MK 93 Tuned
Missile Simulator
(TMS)
OVERVIEW
Used for shipboard maintenance to
Validate
Transmitter
Output
Frequencies,
Noise
levels,
and
Modulations required to support the
Evolved Seasparrow Missile.
Used in the Seasparrow based MK 29
launcher variants shipboard to simulate
the tuning of the missile in support of
system operability tests and operator
training.
5
RELATED PRIME
EQUIPMENT
MK 73 Transmitters
SSCWI Transmitter
MK 29 Mod 1-3
Launcher
NSPO-CPH-0001
Rev -1
ITEM
OVERVIEW
Used in the Seasparrow based MK 29
launcher variants prior to missile
MK 109 Missile All
loading to validate the integrity and
Up Round
operability of the launcher umbilical
Simulator (MARS)
interface to the missile (Launcher is free
to rotate during test).
Used shipboard prior to missile loading
MK 116 Guided
to validate integrity and functionality of
Missile Simulator
Launcher umbilical interface to the
(GMS)
missile (Launcher is free to rotate during
test).
MK 114 Missile
Used shipboard prior to connecting a
Canister Simulator loaded canister to validate integrity and
(Formerly known
functionality of Launcher interface to
as the Evolved Test the Canister. Can also be used with
Set (ETS)
Seasparrow missile.
Ultra-safe resistance testing on Evolved
AMPTEC 640N
Seasparrow Missile rocket motor squibs;
Igniter Tester
Not for Shipboard Use.
Used at the Missile Maintenance
Facility (MMF) and Intermediate
MK 701 Canister
Maintenance Facility (IMA) to validate
Test Set
integrity and functionality of the MK 20
Canisters prior to loading live missiles.
JVC Simulator
Simulates the Seasparrow missile and
canister. The MK 114 Missile Canister
MK 56 Mod 1
Simulator can replace these items.
Missile Simulator
Break Out Box
Validates the continuity of the MK 20
(BOB)
Mod 1. Used at the MMF or MMA.
Validates empty canisters operability.
The MK 701 Canister Test Set can
Preload Test Set
replace this item.
Used shipboard as a manual assist to the
MK 14 Loader
loading of Evolved Seasparrow missiles
into the Launcher.
Used at depot to validate integrity and
MK 680, MK 690
functionality of MK 25 Canister prior to
loading live missiles.
Fire Control System Simulator used
shipboard to validate integrity and
MK 48 FCS Sim
functionality of the FCS to LCP
interface.
6
RELATED PRIME
EQUIPMENT
MK 29 Mod 1-3
Launcher
MK 29 Mod 4/5
Launcher
MK 48 GMVLS,
MK 56 GMVLS
Canister Break Out
Box (BOB)
MK 48 GMVLS
MK 48 Mod 0-3
GMVLS
ESSM
MK 48 GMVLS
MK 29 Launchers
MK 41 VLS
MK 48 GMVLS
NSPO-CPH-0001
Rev -1
ITEM
Link
Communication
Test Set (LCTS)
ESSM Composite
Canister Pre-Load
Test Set
LLLTV Collimator
OVERVIEW
RELATED PRIME
EQUIPMENT
Used to verify and validate X-Band link
operations from initialization to uplinks.
All Transmitters
Used land based, ship based and
Airborne.
Used at depot to validate integrity and
functionality of the Composite “Dual
MK 56 GMVLS
Pack” canister prior to loading live
missiles.
Used when re-installing the MK 6
LLLTV to the MK 78 Director (part of MK 6 LLLTV
MK 57 NSSMS)
3.0 Consortium Memorandums of Understanding & Required Approvals. The
NATO Seasparrow Project operates under the authority provided by four Memorandums of
Understanding (MOU):

Memorandum of Understanding for the International Development of the
NATO SEASPARROW Surface Missile System.

Memorandum of Understanding for the Cooperative Support of the NATO
SEASPARROW Surface Missile System.

Memorandum of Understanding for the Cooperative Production of the Evolved
SEASPARROW Missile.

Memorandum of Understanding for the Cooperative In-Service Support of the
Evolved SEASPARROW Missile.
These MOUs provide the framework for management and execution of the Project as well
as establishing the principles of cooperation that govern the Consortium’s operations. The
MOUs have been signed by the 12 member nations that comprise the NATO Seasparrow
Consortium:
Australia
Belgium
Canada
Denmark
Germany
Greece
The Netherlands
Norway
Portugal
Spain
Turkiye
United States
The aforementioned MOUs established the NATO Seasparrow Project Steering Committee
(NSPSC) which provides management direction and oversight for the Project and is
7
NSPO-CPH-0001
Rev -1
comprised of one member from each of the 12 Consortium nations. The MOUs also call
for a NATO Seasparrow Project Office (NSPO) to serve as the executive staff and
execution agent for the NSPSC. With regard to sales of Consortium products to nonmember nations, there is a well-established process in place. Before Consortium
information can be released and before a sale of NATO Seasparrow products can take
place to a non-member nation(s), NSPSC approval is required. In order to obtain NSPSC
approval, the first step in the process is for a Government or military official from the
purchasing nation to submit a formal request for NSPSC approval. For your convenience,
the Consortium has prepared a form letter that can be used to obtain NSPSC approval (see
example of form letter provided in Appendix A. This letter is also available electronically
in the NATO Seasparrow Web Site, non-consortium Nations sub-site). Once a nation
submits a formal request, the NSPSC Members will be asked to pursue national staffing of
the request. Depending on the timing of the request, this process takes approximately three
months. After the NSPSC approves the release of Consortium information and approves
the sale of Consortium products, the purchasing nation is notified by NSPO. Please
understand that submitting a formal request for release of Consortium information or to
purchase a Consortium product(s) does not imply or constitute any obligation on the part
of the requesting nation. NSPO would be pleased to provide advice and assistance to your
Navy, at no charge, in processing a formal request to obtain NSPSC approval to purchase
Consortium products.
4.0 FMS Process Overview and Requirements. The U.S. Foreign Military Sales (FMS)
Program is one of the options available to non-Consortium nations for obtaining the
Consortium products and services described in this handbook. The U.S. FMS Program
uses formal contracts or agreements between the United States Government (USG) and an
authorized foreign purchaser. These contracts, called Letters of Offer and Acceptance
(LOAs), are signed by both the USG and the purchasing Government and provide for,
amongst other things, the procurement of follow-on support including engineering
services, logistics support, training, documentation, spare and repair parts, equipment
upgrades and related management services.
The Foreign Military Sales (FMS) process begins when an eligible foreign country or
international organization requests information for obtaining follow-on support of
Consortium products via U.S. FMS. These requests, generally referred to as Letters of
Request (LORs), can take the form of formal correspondence, requests for proposal
(RFPs), or via discussions, electronic mail (e-mail), letters, or messages. Although no
specific format is required for an LOR, the non-Consortium nation should ensure that the
request contains as much pertinent information on the desired Consortium Products and
Follow-On Support Services as possible in order to prepare an accurate cost estimate. The
LOR should indicate whether Price and Availability (P&A) data, a Letter of Offer and
Acceptance (LOA), a Letter of Intent (LOI), an LOA Amendment, or an LOA
Modification is desired. Certain USG organizations are authorized to receive and respond
to LORs. For NATO SEASPARROW Consortium products and services, LORs should be
sent to the following organization:
8
NSPO-CPH-0001
Rev -1

Department of the Navy
Navy International Programs Office
ATTN: 02C1
2521 South Clark Street, Suite 800
Arlington, VA 22202-3928
USA
It would be very helpful if a copy of the LOR was also sent to NSPO at the following
address:

Project Manager, NATO SEASPARROW Project Office
ATTN: Code N-34
727 South 23rd Street
Arlington, VA 22202-3214
USA
5.0 Direct Commercial Sales Process Overview and Requirements. When it comes to
procuring follow-on support, the NATO SEASPARROW Consortium is not concerned
with the method of procurement that a nation uses (i.e., Foreign Military Sale (FMS) or
Direct Commercial Sale (DCS)). In fact, the Consortium does not have a preference for
either FMS or DCS. The Consortium’s major concern is that a nation obtains adequate
follow-on support because of its impact on mission assurance. Mission assurance is the
Consortium’s highest priority. Moreover, follow-on support is the single most important
factor in sustaining capability and meeting a nation’s expectations for equipment
performance. Mission assurance is a blend of:

Equipment readiness

Supporting systems readiness

Crew readiness

Logistics support readiness
To achieve mission assurance, the Consortium and the NATO SEASPARROW Project
Office (NSPO) have established an extensive follow-on support network comprised of
Government and commercial organizations. To show the Consortium’s commitment to
mission assurance, the Consortium is offering access to its follow-on support network to
nations who are not members of the NATO SEASPARROW Consortium. Access to the
Consortium’s proven, effective and cost beneficial follow-on support network is available
via FMS or DCS. In some cases, procuring follow-on support via DCS may be a faster
way of obtaining the technical and logistics support your Navy requires. If your Navy
decides to procure technical and logistics support via DCS, there are two options for
accessing the Consortium’s follow-on support network:
1) Utilize NSPO’s Follow-on Support Agent (FOSA)
9
NSPO-CPH-0001
Rev -1
2) Obtain the support directly from the service provider
In both of the options above, your Navy would execute a commercial contract directly with
NSPO’s FOSA or the service provider. NSPO would be pleased to provide your Navy, at
no charge, advice and assistance on procuring follow-on support via DCS.
6.0 Ship Transfers Overview. Member nations of the NATO SEASPARROW
Consortium occasionally sell or transfer ships with NATO SEASPARROW equipment to
non-member nations. Although the sale/transfer of the ship(s) is a transaction between the
selling/transferring nation and the buying nation, Consortium policy requires the NATO
SEASPARROW Project Steering Committee (NSPSC) to approve the transfer of the
NATO SEASPARROW equipment on the ship(s). The NSPSC is responsible for
providing management direction and oversight and is comprised of one member from each
of the 12 Consortium nations (see section 3.0). The primary reason for obtaining NSPSC
approval to transfer the NATO SEASPARROW equipment is to give the Consortium
insight into where NATO SEASPARROW products are located in order to offer assistance
with follow-on support. The selling/transferring nation is responsible for notifying and
requesting NSPSC approval to sell/transfer the NATO SEASPARROW equipment. In
addition to NSPSC approval, please understand there may be other approvals required
before the transfer can occur (e.g., U.S. Department of State). An element that may be
considered as a part of ship transfer with Seasparrow Equipment is support via
sponsorship. Sponsorship is when a Consortium nation agrees to provide specific
assistance to the buying nation for a specific amount of time for some or all NATO
Seasparrow mission assurance elements identified in Section 5.0 of this handbook.
7.0 NSSMS Follow On Support Agent. The NATO Seasparrow Consortium does not
require follow on support as a condition of sale for any Consortium products or missiles.
However, the Consortium strongly encourages nations to utilize the existing in-service
infrastructure applicable to your NATO Seasparrow products in support of life cycle
maintenance. Due to the highly federated nature of the consortium product lines and
available in-service organizations, the NATO Seasparrow Project utilizes a commercial
Follow on Support Agent (FOSA). This FOSA is under the direct control of the NATO
Seasparrow Project Office. The FOSA can provide the primary interface for day-to-day
planning, coordination and execution of follow-on support requirements for your nation,
including the development of required documentation related to FMS Cases or Direct
Commercial Contract(s). In addition, the FOSA can assist you in determining or refining
your requirements for support equipment and systems as well as assisting in defining
recommendations for detailed and cost effective follow on support using the existing
Consortium service providers. Please note that the use of the FOSA will require an initial
“small value” contract or FMS Case.
Figure 7.0 overviews the specifics related to the use of the NATO Seasparrow FOSA. The
process starts with a nation contacting the NATO Seasparrow Project Office (NSPO). The
NSPO will have the FOSA assist you in determining related requirements and needs
associated with NATO Seasparrow equipment. These analyses will include matching
10
NSPO-CPH-0001
Rev -1
available NSSMS equipments and
services to meet your needs and
budget. Once we understand your
needs and the required funding is
in place, the FOSA will construct
and manage your support team
using the existing approved
service providers. The providers
are established and known experts
utilized by the NATO Seasparrow
Consortium for all aspects and
products associated with NATO
Seasparrow.
The constructed
team can support five areas as
follows:
Figure 7.0 FOSA Use Overview
Examples of
Service Providers
L/M
NSPO
Status and
Information
Direction
Delegation
mR
Tea
TP
Nation
FOSA
The Right Support
at the Right Time
Assessment
and
Strategy
Formulation
equ
Acquisition
Management
Support
Direction
Coordination /
Contracting
BAE Systems
n
me
ire
ts
Raytheon
TERMA
NAWC / CL
CEA
PHD
SAABTech
Team Staffing
TP Nation
Support
Team
Design,
Integration,
and INCO
Support
MK 48 ISEA
Thales
NSPO
TP Nation
Inquiry
(Sale / Transfer)
In-Service
Life Cycle
Support
NSS
Future
Improvements

Assessment and Strategies formulation – The FOSA can assist in the analysis and
assessment of your ship self defense needs and as a result recommend the best
available products to meet these needs.

Acquisition Management - The FOSA can assist with assessing your specific
requirements associated with the tactical employment of either the Seasparrow or
Evolved Seasparrow missiles. For example, the determination of a Continuous
Wave Illuminator, including power output requirements.

Design, Integration and INCO - The FOSA can assist with determining specific
integration issues and modifications required as relates to specific combat or
weapons management systems as well as missile and systems equipment
installation and checkout support.

In Service Life Cycle – The FOSA can assist nations in selecting and optimizing
the use of consortium in-service products and services to ensure nations receive
efficient and cost effective in-service support over the expensive alternative of
developing unique in-service support services and products.

Future Improvements - The FOSA has the expertise and abilities to analyze
national requirements, on-going engineering changes and in-service metrics that
facilitates advising nations on recommended improvements, both to the system
prime equipment as well as the missiles themselves.
Further information concerning the FOSA can be obtained via the NATO Seasparrow Web
Site at www.natoseasparrow.org (FOSA Section under the Public header).
8.0 In-Service Products and Services Overview. All NATO Seasparrow equipment lines
are supported with a comprehensive package of in-service products and services, from
11
NSPO-CPH-0001
Rev -1
technical documentation, equipment overall and installation to operation and maintenance
training.
To achieve mission assurance, the NATO Seasparrow Consortium has established an
extensive follow-on support service network that is comprised of Government and
commercial organizations. The Consortium encourages non-consortium nations to utilize
this follow-on support network. Use of this network has proven to be a cost effective way
to achieve and maintain operational readiness of your Seasparrow equipments.
Operational readiness is a blend of:

Equipment Readiness

Supporting Systems Readiness

Crew Readiness

Logistic Support Readiness
To achieve operational readiness, the Seasparrow Consortium has constructed a three
phase follow-on support approach as detailed in Table 8.0.
TABLE 8.0– SEASPARROW EQUIPMENT THREE PHASE SUPPORT
APPROACH
PHASE
OVERVIEW
Development of Life-Cycle Support planning
document.
Material Condition Assessment:
 System Condition.
 Missile Condition, including Rocket Motor
Phase I – Assessment Phase
age.
Analysis of Support Requirements and Needs:
 System employment intentions/mission(s).
 Aligned/coordinated support from Consortium
network.
Initiate a process for spare and repair
parts acquisition.
Provide system field engineering/grooming to
Phase II – Initial Capability
optimize system condition and readiness.
Phase
Provide any required crew operational & maintenance
training.
Provide missile firing support for system qualification
and certification.
Advance to self-sustaining capability:
Phase III – Sustaining
 Day-to-day operations and maintenance support.
Capability Phase
 Sustaining Crew Training.
12
NSPO-CPH-0001
Rev -1
TABLE 8.0– SEASPARROW EQUIPMENT THREE PHASE SUPPORT
APPROACH
PHASE
OVERVIEW
Continued access to Consortium In-Service
products/support:
 NATO Seasparrow International In-Service
Engineering Network (NIISEN).
 Engineering Assistance.
 Engineering Change Proposal Monitoring.
 Repair parts support.
 As requested, assist with analysis of available
NSSMS equipment and missile improvements.
8.1 Seasparrow Missile Variants. The RIM-7 Missile is not managed by the NATO
Seasparrow Consortium. Instead it is a U.S. Navy product that is extensively utilized by
the NATO Seasparrow user nations.
8.1.1 RIM-7 Seasparrow Missile. All variants of the Seasparrow Missiles have a
complete array of supporting products and services available to user nations.
8.1.1.1 Seasparrow Training. A formal training program is required to provide
knowledge and skills required to support the Seasparrow missile and its support equipment
at the operational (O) and intermediate (I) levels of maintenance. All available courses can
be tailored to individual case requirements. These are the basic outlines for training
available for the RIM-7. The available Training courses are listed in Table 8.1.1.1.
TABLE 8.1.1.1– SEASPARROW MISSILE TRAINING COURSES
COURSE NAME
ID #
REMARKS
AIM/RIM-7M Handling
Course O-1 One Week O-Level course.
One Week I-Level course. Focus is
AIM/RIM-7M/P Theory of Operation,
Missile Familiarization
Course I-1
System Interfaces, and AN/DSM-156
Testing.
GMTS Theory, Operation, and
Course I-2 Two Week I-Level course.
Maintenance
Test Set Calibration
Course I-3 Two – Three Week course.
Three Week course. Includes Guided
Missile Handling and
Course I-4 Missile Test Set Installation and
Maintenance
Checkout.
AUR/GCS Test
Course I-5 Two Week course.
8.1.1.2 Seasparrow Technical Documentation. The technical publications, manuals,
drawings, and other documentation required to support the RIM-7 Sparrow missile and its
support equipment. Technical publications will describe all required “O” and “I”
maintenance procedures for the RIM-7 Sparrow missile and its support equipment.
13
NSPO-CPH-0001
Rev -1
Existing Department of Defense (DOD) technical publications approved for FMS release
will be provided wherever possible. These technical publications will be written in English
in the same style and format as USN/USAF technical publications. All technical
publications written to meet unique FMS requirements will carry an FMS prefix.
8.1.1.3 Seasparrow Integrated Logistics Maintenance Facility (ILMF). An Integrated
Logistics Maintenance Facility is required to perform maintenance, testing, and storage of
guided missiles and missile sections. Missiles have to be tested at periodic intervals to
ensure their reliability. This testing must be accomplished with the potential hazards in
mind. Blast-resistant structures, separation distances, and barricades combine to isolate the
damage resulting from fire and explosion. There are significant advantages for a country in
having their own ILMF. There is also a significant cost associated with having an ILMF.
Having ones own ILMF means that there are no delays in testing or maintenance for your
missiles. Countries with limited resources may wish to contract their missile testing and
maintenance requirements with other Sparrow missile countries that have an ILMF. In
doing so they do not need to build an ILMF, train personnel, or buy the associated support
equipment. They do have the logistic requirements for missile transportation and schedules
to contend with. Either way a country precedes an ILMF is required to test the RIM-7
missile.
8.1.2 RIM-162 Evolved Seasparrow Missile (ESSM).
8.1.2.1 ESSM Training. Table 8.1.2.1 identifies all available related Organizational
Level, Intermediate Level, Processing, and Test Equipment training courses. Request
forms for training can be obtained from the NSPO website or by contacting NSPO, Code
542. Training classes, such as the management courses and dockside handling, may be
available at NSWC/PHD, while the majority of the courses can be conducted in-country.
Each of the courses offered can be adapted to meet the nation’s particular needs.
TABLE 8.1.2.1 –ESSM TRAINING COURSES
COURSE NAME
ESSM Familiarization for
Organizational Level Personnel
ID #
ESSM Assembly/Disassembly
MASL P195186
Canister Main Assembly Test
Set (CMTS) MK 680 Operation
Canister Main Assembly Test
Set (CMTS) MK 690
Maintenance
N/A
MASL P195133
MASL P195139
14
SYNOPSIS
Conducted as part of VLS and
FCS curricula.
SMPDs are used. Recertification
is required every two years.
Safely and efficiently inspect,
assemble, disassemble and handle
ESSM.
Perform canister tests using the
MK 680.
Perform canister tests using the
MK 690.
NSPO-CPH-0001
Rev -1
TABLE 8.1.2.1 –ESSM TRAINING COURSES
COURSE NAME
ID #
MK 41 VLS Encan/Decan with
MK 25 Canister for
Intermediate Level Personnel
MASL P195187
Flight Analysis and Telemetry
Analysis
N/A
Flight Operational Overview
N/A
GMTS MK 612 Mod 4
Alignment Technician
MASL P195132
GMTS MK 612 Mod 4
Maintenance Technician
MASL P195128
GMTS MK 612 Mod 4 Test
Operator
MASL P195127
GMTS MK 612 Mod 5 &
Operation and Maintenance and
Support Equipment
Preventative Maintenance
Training
GMTS MK 612 Mod 6 Delta
Theory
Telemetry Test Set MK 678
Mod 0/1 Operation and
Maintenance Course
Theory of Operation (Engineers
Course)
VLS Dockside Handling
VLS Dockside Loading
Training
Depot Level Maintenance
Training
N/A
N/A
N/A
N/A
N/A
SYNOPSIS
Recertification is required every
two years. Safely and efficiently
install and remove the missile
from the MK 25 Canister and
perform empty canister tests.
Training to conduct flight
analysis and telemetry analysis.
A short course on the ESSM
system providing an overview on
ESSM fundamentals.
Perform required system
alignment procedures on the MK
612 Mod 4 Test Set.
Train the Maintenance
Technician to resolve problems
quickly and efficiently without
assistance.
Perform all required Test Set
Self-Tests on the MK 612 Mod 4
Test Set.
Conducted on-site.
Course explains the differences
between MK 612 Mod 4 and MK
612 Mod 6 Test Sets, including
differences and additions to
maintenance procedures,
operation procedures, and
alignment procedures.
Classroom instruction and
laboratory exercises on test set
operation.
Provides a detailed description of
ESSM systems for engineers.
Conduct MK 41 VLS dockside
on/offload.
N/A
Conducted on-site or at PHD.
N/A
Conducted by repair Contractors.
15
NSPO-CPH-0001
Rev -1
8.1.2.2 ESSM Technical Documentation. Technical data, drawings, and documentation
fall into the following categories:

Engineering Drawings and Listings. Design agents are responsible for the
development, maintenance, and delivery of all new and revised drawings and
changes applicable to the engineering and Technical Data Package (TDP). The
TDP is maintained on Raytheon’s Product Data Management (PDM) system.

Planned Maintenance System (PMS) Documentation. PMS was developed
in accordance with the Technical Manual Contract Requirement (TMCR).

Technical Manuals and Missile Section and Missile Round Processing
Documentation. Government approved and controlled documents are
identified by Missile Document (MD) or Ordnance Document (OD) number.
Publications listed in Table 8.1.2.2 may be used by the Fleet and shore-based
activities and Contractor All-Up-Round Facility (AURF) for ESSM operation
and maintenance.

Surface Missile Processing Descriptions (SMPDs). SMPDs are standardized
procedures
used
to
assemble
and
disassemble
during
encanisterization/decanisterization of the ESSM into the MK 25 Mod 0
Canister, and to test the missile round at the AURF or the Intermediate Level
Maintenance Facilities (ILMFs). The ISEA develops the SMPD for each
specific task. The SMPDs define the safety requirements, frequency, tools,
consumables and support equipment for each task.
TABLE 8.1.2.2 ESSM TECHNICAL DOCUMENTATION
DOCUMENT
TYPE
PUB NUMBER
MD 57566
General
Program
Documentation
MD 57158
MD 58120
MD 58044
MD 31460 Addendum E
Intermediate
Level
MD 58815
TITLE
ESSM Failure
Reporting, Analysis and
Corrective Action
(FRACAS)
ESSM Stockpile to
Target Sequence
ESSM Parameters
Document Vol I
ESSM Configuration
Management Plan
ESSM Major Round
Parts Interchangeability
and Service Life Data
I-Level Maintenance
Support Procedures and
16
COGNIZANT
ACTIVITY
NSWC/PHD
NSWC/PHD
NSWC/PHD
NSPO
NSWC/PHD
NSWC/PHD
NSPO-CPH-0001
Rev -1
DOCUMENT
TYPE
PUB NUMBER
OP 5
OP 4
Processing and
Facility
Documentation
SW 020-AC-SAF010/020/030
MD 57119
TITLE
Guidelines
Ammunition &
Explosives Ashore;
Safety Rigs for
Handling, Storing,
Production, Renovation
and Shipping
Explosive Safety Afloat
Transportation and
Storage Data for
Ammunition,
Explosives, and Related
Hazardous Materials
MK 41 Canister Demil
& Disposal Plan
VLS Encan/Decan
Equipment Selection
Guide
MD 57406
MD 57455
MD 57572
SMPDs for Industrial
Processing
Special Processing
Instructions (Guidelines)
SW394-EE-PRO-010
TW394-EE-PRO-D10
MK 41 Only
TW394-EE-PRO-E10
TW394-EE-PRO-F10
TW394-EE-PRO-A10
TW394-EE-PRO-H10
TW394-EE-PRO-O10
TW394-EE-PRO-C10
MK 48 Only
TW394-EE-PRO-D10
MK 56 Only
TW394-EE-PRO
TW394-EE-PRO-A10
MD 58012
MD 58013
MK 41 VLS Dockside
Handling Procedures
VLS Dockside Loading
Equipment Selection
Guide
Limited Maintenance
Activity Equipment
Selection Guide
17
COGNIZANT
ACTIVITY
NOSSA/
NSWC Earle
PHS&T
NSWC Earle
PHS&T
NOSSA/
NSWC Earle
PHS&T
NSWC/PHD
NSWC/PHD
NSWC/PHD
NSWC/PHD
US
The
Netherlands
Spain
Australia
Germany
Norway
Turkiye
Canada
The
Netherlands
Greece
Denmark
NSWC/PHD
NSWC/PHD
NSPO-CPH-0001
Rev -1
DOCUMENT
TYPE
PUB NUMBER
TITLE
COGNIZANT
ACTIVITY
Limited Maintenance
Manual for MK 25
Canister
MK 783 Container
Manual
O, I, & Depot
Maintenance
Instructions
MK 71 Lifting Beam
SW810-AP-MMI-010
SG830-AC-OMI-010
OR-99
OR-67
NSWC/PHD
NSWC/PHD
NSWC/PHD
NSWC/PHD
8.1.2.3 ESSM Integrated Logistics Maintenance Facility (ILMF). Processing of
ESSMs will be performed at the AURF in Camden, Arkansas, U.S.A. and the ILMFs. The
ILMF processing consists of missile receipt, storage, repair, and test. The facility must
accommodate the handling and test equipment and ensure that adequate magazine storage
is available. The following Table 8.1.2.3 lists the active and planned ILMFs with ESSM
capability.
TABLE 8.1.2.3 – ESSM ILMFs
FACILITY NAME
Royal Netherlands Navy
Den Helder,
The Netherlands
Defence Establishment
Orchard Hills, Australia
Naval Ordnance Facility
El Ferrol, Spain
Raytheon Missile Systems,
Camden, Arkansas, U.S.A
Canakale, Turkiye
Greece
COUNTRIES SERVICED
OPERATIONAL
OR PLANNED
ACTIVATION
The Netherlands, Denmark,
Germany, Norway
2004
Recertified 2006
Australia
2005
Certified 2007
Spain
2008
United States, Canada
2005
Turkiye
Greece
2010
TBD
8.1.2.4 ESSM Support Equipment. Support, handling, and test equipment is required for
ESSM processing. Containers, PHS&T, and ordnance handling equipment are required for
handling, processing, and transportation of the missile and its components. The User’s
Logistics Support Summary (MD57561) contains a list of handling equipment for the
ESSM. Table 8.1.2.4 identifies the major test equipment used at the Naval Weapons
Stations and the AURF, Camden, Arkansas, U.S.A.
18
NSPO-CPH-0001
Rev -1
Table 8.1.2.4 – ESSM SUPPORT EQUIPMENT
REMARKS
I-LEVEL TEST EQUIPMENT
Guided Missile Test Set (GMTS) MK 612
Mod 5/6
TDTS TS MK 678 Mod 1 or Mod 2
Canister Automated Test Set (CATS) MK
690
Tester, Igniter Circuit (AMPTEC) Model
640N
Cable, Adapter, Code Plug PN 7277666-1
Template, Test Set (UBOB), ESSM PN
7379010-101-TBD (52K-0132-1)
Breakout Box, ESSM Test Connector PN
7116972
Canister Assembly Test Set
MK 680 Mod 1/2
UBOB MK 674
MK 673 Code Plug Test Set
Canister Test Set MK 701
ESSM (Missile Assembly)
Missile Assembly (TLM Rounds Only)
Empty MK 25 VLS Canister
MK 25 VLS Canister (Loaded)
Code Plug (MK 41 VLS Rounds Only)
MK 20 VLS Canisters
8.2 Fire Control Systems. Most Fire Control System support services and products used
by the Consortium can be made available to non-Consortium nations. Additionally, these
products can be tailored to meet your specific national requirements.
8.2.1 MK 57 Mod 2-13 NSSMS. All variants of the MK 57 NSSMS
have a complete array of In-service products and support services
available via the Consortium infrastructure, both from Industry and
Government organizations. The NSPO can advise and assist you in
understanding the details of each support element and their applicability to
your particular requirements and needs.
8.2.1.1 MK 57 Parts Support. Parts for the MK 57 system are provided via the USN’s
Inventory Control Point (NAVICP). The NSPO can advise on the set-up of an FMS case
to provide the initial spare parts lay-in, as required, as well as for replacement parts
through the life-cycle of the system.
8.2.1.2 MK 57 Training. Table 8.2.1.2 identifies all available related Operation and
Maintenance training courses. Generally, the training is supported by an approved
certified Instructor Staff. Upon completion of training, the course material is usually left
with the nation for future use. The training is traditionally conducted at the NSSMS
training site, Dam Neck, Virginia USA. However, the training can be provided in-country
as well. It should be noted that this training is best accomplished when an active system is
available. Each of the available courses can be adapted to meet nation’s particular needs.
19
NSPO-CPH-0001
Rev -1
TABLE 8.2.1.2– MK 57 MOD 2-13 NSSMS TRAINING COURSES
COURSE NAME
MK 57 Mod 2/3 Operation &
Maintenance Course
MK 57 Mod 10-13 Operation &
Maintenance Course
REMARKS
30 week training course.
4 week training course. Course supported by a
Training Equipment Simulator.
8.2.1.3 MK 57 Installation & Checkout. MK 57 Mod 2-13 equipment installation is
supported by the use of a series of installation documents (OD 32341 and Installation
Requirements Manuals). In addition, the Consortium can provide the special subject
matter expertise, Installation and Check Out (INCO) and IKEE Kit materials to facilitate
an efficient installation process of all above decks and below decks NSSMS equipment and
upgrades.
8.2.1.4 MK 57 Technical Documentation. The MK 57 Mod 2-13 systems include a
comprehensive set of technical manuals that align to the USN’s Surface Missile System
(SMS) technical manual requirements. These manuals document/support the maintenance
as well as operations of the NSSMS. All manuals are under life-cycle control by the
NSPO and are updated, as needed (Technical errors, upgrades, feedback, etc). All manuals
are available in electronic format (some in minimally PDF Format and others in full
Interactive Electronic Technical Manuals (IETM) format).
8.2.1.5 MK 57 Planned Maintenance System (PMS). The MK 57 Mod 2-13 related
products include a robust set of maintenance procedures, both scheduled and unscheduled
for every element of the NSSMS. These procedures align with the USN’s requirements for
PMS. Scheduled maintenance provides a series of recommended actions related to
preventive maintenance. Unscheduled actions provide a series of procedures related to
corrective maintenance. These maintenance procedures are aligned into the various
Maintenance Index Pages (MIP) defined in Table 8.2.1.5. This PMS is available for
download from the NATO Seasparrow Web Site for authorized users.
TABLE 8.2.1.5– MK 57 MOD 2-13 NSSMS PMS
MIP NAME
Scheduled Maintenance - Fire Control System
Scheduled Maintenance - Launching System
Un-Scheduled Maintenance - Fire Control System
Un-Scheduled Maintenance - Launching System
ID #
4821
7211
5ZEG
5AE2
REMARKS
Available in Electronic
Format (PDF) or
hardcopy.
8.2.1.6 MK 57 Special Purpose Electronic Test Equipment (SPETE). Many of the
Consortium support tools listed in Table 2.7 require periodic calibration or repair. These
services are coordinated and conducted in a variety of ways; dependant on the level of
support a nation has in-place for SPETE.
20
NSPO-CPH-0001
Rev -1
8.2.1.7 MK 57 Material Condition Assessment (MCA) / Overhaul Support. MK 57
Mod 2-13 Equipment overhauls and MCAs are supported by an array of support
documents. In addition, the In-Service Engineering Activity (ISEA) can provide the
special subject matter expertise and materials to facilitate an efficient overhaul experience
of all above decks and below decks NSSMS equipment. In addition, the use of the
Consortium’s Depot to provide overhaul services can be arranged.
8.2.2 Cluster I - III Dutch Configuration (DC) Fire Control System. The Dutch
Configuration Fire Control Systems (DCFCS) are managed very differently than the other
Consortium product lines. First, the Original Equipment Manufacturer
(OEM) for all these systems is Thales. Thales assigns a project number
to a nation’s configuration which represents a unique configuration item
within Thales’ configuration management database. In the original
procurement of a Dutch Configuration FCS from Thales, nations defined
its own unique requirements including documentation, sparing and
training. This means that in-service support requirements will be unique
for each nation. It also means that there is no single product or service
which is applicable to all user nations or even all projects within those
nations.
When a nation requests NSPO to manage an element of in-service support, a program is
developed and tailored to that nation’s specific needs and requirements at the time of the
request. This approach saves significantly on overhead costs for infrastructure and
resources that may never be used by a nation, and gives each nation the flexibility to define
a program that meets their own needs.
8.2.2.1 DCFCS Support Elements. For each of the established project numbers
(configurations) NSPO provides management support to Consortium PGs in the following
areas:

Technical Assistance/Support

Training. Thales-NL provides training for operators and maintainers, but can
also provide training courses for a comprehensive range of client personnel at
the appropriate levels. The courses can be conducted at Thales-NL's
International Training Centre or at the client’s site or onboard ship. It is
assumed that ‘Follow-On’ training of replacement crews and maintenance
personnel will be conducted using the resources of the user of the system.
Support for this continuation training as part of a Follow On Support package
can be arranged at any time under separate contract arrangements.

Configuration Management

ECP Development and Implementation

Spares
21
NSPO-CPH-0001
Rev -1

Repairs

Computer Program Support (including Software In-Service Support)

Documentation. All Thales-NL manuals and technical documentation can be
made available in electronic format (PDF-format); a viewer (Adobe Acrobat
Reader) will also be supplied on the CD-ROM in order to create a Computer
Aided Logistic Support (CALS) compliant IETM Class 2 format.

Procurement

Contract Support

Contract Management
As with the Consortium nations, non-Consortium nation support will be defined and
tailored uniquely to your requirements.
8.3 Seasparrow Launching Systems. Most launching system support services and
products used by the Consortium can be made available to non-Consortium nations.
Additionally, these products can be tailored to meet your specific national requirements.
The projects POCs can advise and assist you in understanding the details of each GMLS
support element and their applicability to your particular requirements and needs.
8.3.1 MK 29 GMLS. All variants of the MK 29 GMLS have a complete array of Inservice products and support services available via the Consortium infrastructure, both
from Industry and Government organizations. The NSPO can advise and assist you in
understanding the details of each support element and their applicability to your particular
requirements and needs.
8.3.1.1 MK 29 Parts Support. Parts for the MK 29 GMLS are provided via the USN’s
Inventory Control Point (NAVICP). The NSPO can advise on the set-up of an FMS case
to provide the initial spare parts lay-in, as required, as well as for replacement parts
8.3.1.2 MK 29 Training. Training for the MK 29 GMLS is provided for as a component
of the complete MK 57 Operation & Maintenance Courses. However, stand-alone MK 29
training can be accommodated as required ands specified by a user nation. In addition, the
Consortium offers two MK 29 centric missile handling courses as specified in Table
8.3.1.2.
22
NSPO-CPH-0001
Rev -1
TABLE 8.3.1.2– MK 29 GMLS TRAINING COURSES
COURSE NAME
Seasparrow MK 29 GMLS
Missile Handling Course
RIM-162 MK 29 GMLS
Missile Handling Course
REMARKS
5 day training course. Conduct normally
accomplished at USN’s NATO Seasparrow Training
Site (Dam Neck, Virginia).
Conduct provided by NSWC/PHD in the field.
8.3.1.3 MK 29 Installation & Checkout. MK 29 GMLS equipment installation is
supported by the use of a series of installation documents (OD 32341 and Installation
Requirements Manuals). In addition, the Consortium can provide the special subject
upgrades.
8.3.1.4 MK 29 Technical Documentation. The MK 29 GMLS includes a comprehensive
set of technical manuals. As with the MK 57 Systems, the MK 29 aligns with the USN’s
technical documentation requirements. These manuals document/support the maintenance
as well as operations of the NSSMS. All manuals are under life-cycle control by the
NSPO and are updated, as needed (Technical errors, upgrades, feedback, etc).
8.3.1.5 MK 29 Planned Maintenance System (PMS). The MK 29 GMLS related
products include a robust set of maintenance procedures, both scheduled and unscheduled
for every element of the NSSMS. These procedures align with the USN’s requirements for
PMS. Scheduled maintenance provides a series of recommended actions related to
preventive maintenance. Unscheduled actions provide a series of procedures related to
corrective maintenance.
These maintenance procedures are aligned into various
Maintenance Index Pages (MIP) as defined in Table 8.3.1.5. This PMS is available for
download from the NATO Seasparrow Web Site for authorized users.
TABLE 8.3.1.5– MK 29 GMLS PMS
MIP NAME
Scheduled Maintenance - Launching System
Un-Scheduled Maintenance - Launching System
ID #
7211
5AE2
REMARKS
8.3.1.6 MK 29 Special Purpose Electronic Test Equipment (SPETE). The MK 29
GMLS variants are principally supported by the MK 567 Missile Simulator Test Set
(MSTS) and the MK 109 Missile All Up Round Simulator (MARS) in the case of the
Seasparrow based MK 29 GMLS variants. For the Evolved Seasparrow missile based
variants, the main SPETE is the MK 116 Guided Missile Simulator (GMS). Many of the
Consortium support tools listed in Table 2.7 require periodic calibration or repair. These
services are coordinated and conducted in a variety of ways; dependant on the level of
support a nation has in-place for SPETE.
23
NSPO-CPH-0001
Rev -1
8.3.1.7 MK 29 Overhaul Support. MK 29 GMLS Equipment overhauls are supported by
an array of support documents. In addition, the In-Service Engineering Activity (ISEA)
can provide the special subject matter expertise and materials to facilitate an efficient
overhaul experience of all above decks and below decks NSSMS equipment. In addition,
the use of the Consortium’s Depot to provide overhaul services can be arranged.
8.3.2 MK 48 Guided Missile Vertical Launching System (GMVLS). All variants of the
MK 48 GMVLS are fully supported by in-service products and technical expertise
available via the Consortium infrastructure, both from Industry and Government
organizations. The NSPO and FOSA can advise and assist you in understanding the details
of each support element and their applicability to your particular requirements and needs.
8.3.2.1 MK 48 Parts Support. The design agent generally provides parts during the
initial acquisition of a MK 48 GMVLS. In-service parts support can be acquired via
various providers. The MK 48/MK 56 Launching Systems ISEA provides support by
researching sources of supply for legacy system components, replacement parts sources,
and investigating component failures. The FOSA can advise on the set-up to provide the
initial spare parts lay-in, as required, as well as for replacements parts through the lifecycle of the system.
8.3.2.2 MK 48 Training. Various MK 48 GMVLS courses are offered from the industry
and the MK 48/MK 56 Launching System ISEA. Training can be accommodated as
required, or specified by a user nation. The Consortium courses are listed in Table 8.3.2.2.
TABLE 8.3.2.2– MK 48 GMVLS TRAINING COURSES
COURSE NAME
MK 48 GMVLS Operation and
Maintenance Course
Integrated VL ESSM System Course
Fire Control System Simulator User
Course
Evolved Test Set (ETS) User Course
REMARKS
5-day training course, conducted by Raytheon
at user nation location.
10-day training course, conducted by the MK
48 ISEA, preferably at the Land Base Test Site
in Halifax, Canada, or if required at user nation
location.
2-day training course, conducted by the MK 48
ISEA at user nation location.
MK 220 Mod 0/1 MLC Data
Recording and Reduction (DRR)
Operator Course
MK 1 Mod 0 LCP DRR Operator
Course
ISEA, preferably at the Land Base Test Site in
Halifax, Canada, or if required at user nation
location.
24
NSPO-CPH-0001
Rev -1
TABLE 8.3.2.2– MK 48 GMVLS TRAINING COURSES
COURSE NAME
MK 20 Mod 0/1 Canister Loading,
Unloading, and Intermediate
Maintenance Course
MK 701 Mod 0 Canister Test Set
(CTS) User Course
REMARKS
8.3.2.3 MK 48 Installation & Checkout. MK 48 GMVLS equipment installation is
supported by the use of installation manuals, weapon interface specifications, and
installation requirements manuals. In addition, the Consortium can provide the special
subject matter expertise to facilitate above decks and below decks launch system
installation. The MK 48 ISEA also provides a post-installation Independent Verification
and Validation (IV&V) of the system. Analysis of data recorded by the GMVLS during
testing and actual firings can also be provided.
8.3.2.4 MK 48 Technical Documentation. The DC FCS includes a comprehensive set of
technical manuals. These manuals document/support the maintenance as well as
operations of the NSSMS. All manuals are under life-cycle control by the NSPO and are
updated, as needed (Technical errors, upgrades, feedback, etc).
8.3.2.5 MK 48 Planned Maintenance System (PMS). Required planned maintenance
actions for the MK 48 are embedded into the applicable technical manuals.
GMVLS RIM-7 and RIM-162 launcher variants are principally supported by the MK 114
Mod 0 Missile/Canister Evolved Test Set (ETS). Many of the Consortium support tools
listed in Table 2.7 require periodic calibration or repair. These services are coordinated
and conducted in a variety of ways, dependant on the level of support a nation has in place
for SPETE. Training on the use of the test sets is listed in Table 8.3.2.2.
8.3.2.7 MK 48 Overhaul Support. The MK 48 GMVLS equipment overhauls are
supported by an array of support documents. In addition, the MK 48/MK 56 Launching
Systems ISEA can provide the special subject matter expertise to facilitate an efficient
overhaul experience of all above decks and below decks system equipment.
8.3.3 MK 56 Guided Missile Vertical Launching System (GMVLS). The NSPO and
FOSA can advise and assist you in understanding the details of each support element and
their applicability to your particular requirements and needs.
8.3.3.1 MK 56 Parts Support. The design agent generally provides parts during the
initial acquisition of a MK 56 GMVLS. In-service parts support can be acquired via
various providers. The MK 48/MK 56 Launching Systems ISEA provides support by
researching sources of supply for legacy system components, replacement parts sources,
and investigating component failures. The projects POCs can advise on the set-up to
25
NSPO-CPH-0001
Rev -1
provide the initial spare parts lay-in, as required, as well as for replacements parts through
the life-cycle of the system.
8.3.3.2 MK 56 Training. MK 56 GMVLS courses are currently offered from industry
and training requirements can be coordinated via the POCs to meet the needs of user
nations.
8.3.3.3 MK 56 Installation & Checkout. MK 56 GMVLS equipment installation is
supported by the use of installation manuals, weapon interface specifications, and
installation requirements manuals. In addition, the Consortium can provide the special
subject matter expertise to facilitate above decks and below decks launch system
installation.
8.3.3.4
MK 56 Technical Documentation. The MK 56 GMVLS includes a
comprehensive set of technical manuals.
These manuals document/support the
maintenance as well as operations of the NSSMS. All manuals are under life-cycle control
by the NSPO and are updated, as needed (Technical errors, upgrades, feedback, etc).
GMVLS RIM-162 launcher variants are principally supported by the MK 114 Mod 0
Missile/Canister Evolved Test Set (ETS).
8.3.3.6 MK 56 Overhaul Support. The MK 56 GMVLS equipment overhauls are
supported by an array of support documents. In addition, the MK48/MK56 Launching
Systems ISEA can provide the special subject matter expertise to facilitate an efficient
overhaul experience of all above decks and below decks system equipment.
8.4 Missile Canisters.
8.4.1 MK 20 Canister. The MK 20 Mod 0/1 Canister used for the on-board storing and
firing of RIM-7 and RIM-162 missiles is supported by a complete array of in-service
products, manuals, and services. The MK 48/MK 56 Launching Systems ISEA provides
training on the operational maintenance and overhaul, Mod 0 to Mod 1 ORDALT
procedure, and missile encan/decan procedures. The ISEA also offers in-service canister
hydrostatic pressure testing. The MK 701 Mod 0 CTS is the principal test equipment to
verify the electrical functionality of the canister.
8.5 Jet Vane Controller (JVC). The NSPO and FOSA can advise and assist you in
understanding the details of each JVC support element and their applicability to your
particular requirements and needs.
8.5.1 JVC Training. Table 8.5.1 identifies the available JVC related course of
instructions.
26
NSPO-CPH-0001
Rev -1
TABLE 8.5.1– JVC TRAINING COURSES
COURSE NAME
Jet Vane Control Theory of Operation
Jet Vane Control Mating Course
All-Up-Round Testing - Phase I & II Tests
JVC Preventive Maintenance and Corrosion Control
REMARKS
8.5.2 JVC Technical Documentation. The JVC has a comprehensive technical manual.
This manual documents/supports the maintenance as well as operations of the NSSMS.
The manual is under life-cycle control by the NSPO and is updated, as needed (Technical
errors, upgrades, feedback, etc). Technical Bulletins are immediately for any issue that
requires prompt attention by the users. The technical bulletins are then incorporated into
the manual on the next revision.
8.5.3 JVC Planned Maintenance System (PMS). Relevant procedures associated with
preventative and corrective maintenance are contained within the JVC technical manual
and any outstanding JVC Technical Bulletins available from the JVC ISEA or the NSPO
website, www.natoseasparrow.org.
8.5.4 JVC Overhaul Support. JVCs are repaired and overhauled by Raytheon Technical
Services Company (RTSC), Indianapolis, IN.
8.6 MK 73 Mod 1 Transmitter (CW Illuminators). Most Transmitter support services
and products used by the Consortium can be made available to non-Consortium nations.
Additionally, these products can be tailored to meet your specific national requirements if
needed.
8.6.1 MK 73 Parts Support. Parts for the MK 73 Transmitter variants are provided via
the USN’s Inventory Control Point (NAVICP). The NSPO can advise on the set-up of an
FMS case to provide the initial spare parts lay-in, as required, as well as for replacement
parts through the life-cycle of the system.
8.6.2 MK 73 Training. MK 73 Transmitter Training is accomplished as a module in the
various MK 57 NSSMS Training coursers. However, stand-alone MK 73 training can be
provided upon request. The Consortium has available training simulators to simulator the
actual Transmitter equipments. In addition, the Consortium has an advanced maintenance
training course available for the MK 73 Mod 3 SSTX as specified in Table 8.6.2.
TABLE 8.6.2– MK 73 TRANSMITTER TRAINING COURSES
COURSE NAME
MK 73 Mod 3 Advanced Maintenance
Training
REMARKS
2 week course.
27
NSPO-CPH-0001
Rev -1
8.6.3 MK 73 Installation & Checkout. MK 73 Transmitter equipment installation is
supported by the use of a series of installation documents. In addition, the Consortium can
provide the special subject matter expertise, Installation and Check Out (INCO) and IKEE
Kit materials to facilitate an efficient installation process of the equipments and upgrades.
8.6.4 MK 73 Technical Documentation. The MK 73 includes a comprehensive set of
technical manuals. These manuals are aligned with the USN’s requirements for technical
documentation. These manuals document/support the maintenance as well as operations of
the NSSMS. All manuals are under life-cycle control by the NSPO and are updated, as
needed (Technical errors, upgrades, feedback, etc).
8.6.5 MK 73 Planned Maintenance System (PMS). MK 73 Transmitter PMS is support
via the two MK 57 NSSMS related MIPS as specified in Table 8.6.5
TABLE 8.6.5– MK 73 TRANSMITTER PMS
MIP NAME
Scheduled Maintenance - Fire Control System
Un-Scheduled Maintenance - Fire Control System
ID #
4821
5ZEG
REMARKS
8.6.6 MK 73 Special Purpose Electronic Test Equipment (SPETE). The MK 73
Transmitter principally utilizes the AN/APM-383 Radar Test Set (RTS) for validating the
operability of the Transmitter with respect to output frequency and modulations. The 383
RTS is recommended to be periodically calibrated by one of the two available calibration
facilities (Yorktown, Virginia, USA and Wilhelmshaven, Germany).
8.6.7 MK 73 Overhaul Support. MK 73 Transmitter Equipment overhauls are
supported by an array of support documents. In addition, the In-Service Engineering
Activity (ISEA) can provide the special subject matter expertise and materials to facilitate
an efficient overhaul experience of the equipment. In addition, the use of the Consortium’s
Depot to provide overhaul services can be arranged.
8.7
MK 6 Mod 2 Low Light Level Television System (LLLTV). All LLLTV
support services and products used by the Consortium can be made available to nonConsortium nations. Additionally, these products can be tailored to meet your specific
national requirements as needed.
8.7.1 MK 6 LLLTV Part Support. Parts for the MK 6 LLLTV are provided via the
USN’s Inventory Control Point (NAVICP). The NSPO can advise on the set-up of an
FMS case to provide the initial spare parts lay-in, as required, as well as replacement parts
8.7.2 MK 6 LLLTV Training. Training for the MK 6 LLLTV is provided as a
component of the complete MK 57 Operation & Maintenance Courses. However, standalone LLLTV training can be accommodated as required or can be specified by a user
nation.
28
NSPO-CPH-0001
Rev -1
8.7.3 MK 6 LLLTV Installation & Checkout. MK 6 LLLTV equipment installation is
supported by the use of a series of installation documents (SW261-TR-IEM-050 Rev 1
Installation Requirements Manuals). In addition, the Consortium can provide subject
upgrades.
8.7.4 MK 6 LLLTV Technical Documentation. The MK 6 LLLTV includes a
comprehensive set of technical manuals. As with the MK 57 Systems, the MK 6 aligns
with the USN’s technical documentation requirements. These manuals document/support
the maintenance as well as operations of the NSSMS. All manuals are under life-cycle
control by the NSPO and are updated, as needed (Technical errors, upgrades, feedback,
etc).
8.7.5 MK 6 LLLTV Planned Maintenance System (PMS). The MK 6 LLLTV related
products include a robust set of maintenance procedures, both scheduled and unscheduled.
These procedures align with the USN’s requirements for PMS. Scheduled maintenance
provides a series of recommended actions related to preventive maintenance. Unscheduled
actions provide a series of procedures related to corrective maintenance. This PMS is
available for download from the NATO Seasparrow Web Site for authorized users.
TABLE 8.7.5 – MK 6 LLLTV PMS
MIP NAME
Scheduled Maintenance – Low Light Level
Television MK 6
Un-Scheduled Maintenance - Low Light Level
Television MK 6
ID #
REMARKS
5HEK
5HEK
8.7.6 MK 6 LLLTV Special Purpose Support Equipment. The MK 6 LLLTV is
principally supported by the following pieces of support equipment: Low Pressure Gauge
Assembly, Purging Assembly, Collimator Assembly, Remote Interface Box and Lens
Cradle, Lens Assembly installation and or removal and lay-up.
8.7.7 Overhaul Support. MK 6 LLLTV Equipment overhauls are supported by an array
of support documents. In addition, the In-Service Engineering Activity (ISEA)/Naval
Surface Warfare Center Port Hueneme Division can provide the special subject matter
expertise and materials to facilitate an efficient overhaul experience of all LLLTV
equipment. In addition, the use of the Consortium’s Depot to provide overhaul services
can be arranged.
29
NSPO-CPH-0001
Rev -1
9.0
Points of Contact.
NAME
Mr.
Raymond
Blackburn
Mr.
Tom
Dryden
TABLE 9.0 POINTS OF CONTACT
ORG/TITLE
EMAIL
NSPO, Third
Party Sales/
[email protected]
Follow On
Support Manager
BAE Systems
[email protected]
30
PHONE
+703.607.7200,
X133
+757.839.0824
NSPO-CPH-0001
Rev -1
10.0
Glossary of Terms
TABLE 10.0 TERMS/ACRONYMS
TERM/
ACRONYM
AAWS
ADACS
APAR
AURF
BOB
CAPT
CAS
CMTS
CTS
CW
DC
DCS
DECAN
DOD
DRR
ECP
ENCAN
ESSM
ETS
FCS
FFG
FMS
FOSA
FRACAS
GMLS
GMS
GMTS
GMVLS
HAW
I
IETM
IKEE
ILMF
INCO
IPT
ISEA
JVC
KW
LCP
DEFINITION
Anti Air Warfare System
Australian Distributed Architecture Combat System
Advanced Phased Array Radar
All Up Round Facility
Break Out Box
Captain
Combined Antenna System
Canister Main Assembly Test Set
Canister Test Set
Continuous Wave
Dutch Configuration
Direct Commercial Sale
De-canister
Department Of Defense
Data Recording and Reduction
Engineering Change Proposal
En-canister
Evolved Seasparrow Missile
Evolved Test Set
Fire Control System
Guided Missile Frigate
Foreign Military Sales
Follow On Support Agent
Failure Reporting, Analysis and Corrective Action
Guided Missile Launching System
Guided Missile Simulator
Guided Missile Test Set
Guided Missile Vertical Launching System
Home All The Way
Intermediate
Interactive Electronic Technical Manuals
Installation Kit Electronic Equipment
Integrated Logistic Maintenance Facility
Installation & Checkout
Integrated Product Team
IN Service Engineering Activity
Jet Van Controller
Kilo Watt
Local Control Panel
31
NSPO-CPH-0001
Rev -1
TERM/
ACRONYM
LCTS
LLLTV
LOA
LOR
LS
MARS
MCA
MD
MIP
MLC
MMF
MOU
NATO
NAVICP
NIISEN
NOSSA
NSPO
NSPSC
NSSMS
NSWC
NSWC/PHD
O
OD
OEM
ORDALT
P&A
PDM
PG
PHD
PHS&T
PMS
PN
POC
RDN
RF
RFP
RIM
RTS
RTSC
SIM
SMR
SMS
SPETE
DEFINITION
Link Communication Test Set
Low Light Level Television
Letter of Offer and Acceptance
Letters of Request
Launching System
Missile All Up Round Simulator
Material Condition Assessment
Missile Document
Maintenance Index Page
Missile Launch Controller
Missile Maintenance Facility
Memorandum Of Understanding
North Atlantic Treaty Organization
Naval Inventory Control Point
NATO Seasparrow International In Service Engineering Network
Naval Ordnance Safety and Security Activity
NATO Seasparrow Project Office
NATO Seasparrow Project Steering Committee
NATO Seasparrow Surface Missile System
Naval Surface Weapons Center
Naval Surface Weapons Center/ Port Hueneme Division
Operational
Ordnance Document
Original Equipment Manufacturer
Ordnance Alteration
Price & Availability
Product Data Management
Participating government
Port Hueneme Division
Package Handling Shipping & Transportation
Planned Maintenance System
Part Number
Point Of Contact
Royal Danish Navy
Radio Frequency
Request For Price
Surface to Air Missile
Radar Test Set
Raytheon Technical Support Company
Simulator
Signaal Miniature Rekeneaar
Surface Missile System
Special Purpose Electronic Test Equipment
32
NSPO-CPH-0001
Rev -1
TERM/
ACRONYM
SSCWI
STANFLEX
STIR
TDP
TLM
TMCR
TMS
TPS
TWT
UBOB
USAF
USG
USN
VL
VLS
DEFINITION
Solid State Continuous Wave Illuminator
Standard Flexible
Separate Tracking and Illumination Radar
Technical Data Package
Telemetry
Technical Manual Contract Requirement
Tuned Missile Simulator
Third Party Sale
Traveling Wave Tube
Universal Break Out Box
United States Air Force
United States Government
United States Navy
Vertical Launch
Vertical Launch System
33
NSPO-CPH-0001
Rev -1
APPENDIX A
GENERIC LETTER FOR A PROSPECTIVE CUSTOMER
Project Manager, NATO Seasparrow Surface Missile System Project
727 South 23rd Street
Arlington, VA 22202
U.S.A.
Dear Captain,
The purpose of this letter is to inform you of the interest by the Government of
in the possible purchase and installation of the Evolved Seasparrow
country
Missile (ESSM) in
fill in ship class
.
It has been determined that ESSM could meet the requirements for a capable Anti-Air
Warfare/Anti-Ship Cruise Missile system for the
fill in ship class
. The
current plan is to begin deploying ESSM in the 20__ timeframe. In the meantime, it is our
understanding the NATO Seasparrow Consortium must approve the purchase of ESSMs
and related NATO Seasparrow equipment by country. This letter is provided as an official
request for information and to initiate the Consortium's approval process. For planning
purposes,
country foresees a requirement for approximately ____________
ESSMs.
It is understood the Government of
country
assumes no contract
responsibility or financial obligation in sending this letter.
34

Consortium Products Handbook - NATO SEASPARROW Surface

Transcription

Similar documents

Transformers Crossovers Star Wars Obi Wan Kenobi Jedi Starfighter

160226 - WorldCover

7.2 Abbreviations 7.3 Symbols

armedforces

October_2015

ACV-30

Flyer EAV 2015.indd

Survival - Finmeccanica

cvn corvette

Hawaii Army National Guard Nike Herc