SATA to 44-Pin IDE Converter

SATA to 44-Pin IDE Converter
Model: ADSAIDE44
INTRODUCTION
The SATA - 44-pin IDE Converter is a perfect solution for converting 2.5"
Serial ATA hard drives to 44-pin IDE interface. Just simply attach this
converter to the back of any SATA storage device, and instantly the
Serial ATA drive can be used as an IDE device in all kinds of applications
that have been tested and certified for IDE storage.
Sample Applications
• Write blocking for SATA hard
drives. Great for forensic applica
tions
• Attach Serial ATA hard drive
directly to 44-pin IDE controllers.
Great for embedded systems or
computers that are not equipped
with SATA controllers
FEATURES
SPECIFICATIONS
• Convert any 2.5" Serial ATA device into 44-pin
IDE interface
• Support Master, Slave, and Cable Select settings
using jumpers
• Mount directly to the back of SATA hard drive
• Compact size -slightly higher than a 2.5" Serial
ATA hard drive
• No drivers required
• Bootable
• Simple plug and play, no drivers required
• Serial ATA 1.0 compliant
• Support ATA 33/66/100/133
• 48 bits LBA. Support large hard drives of 137 GB or
larger with one partition
• Compatible with any OS (Windows, DOS, Mac,
Linux, UNIX..) that supports IDE or ATAPI storage
devices
• Supports Spread Spectrum in receiver
• Compliant with ATA specifications
• Input: combo SATA 15-pin power and 7-pin data
connector (direct attach to SATA hard drive)
• Output: 44-pin IDE male connector (works with
44-pin IDE connecting cable)
• Weight: 7g
• Dimensions (L x W x H): 69 x 14 x 17 mm
• 1 year warranty
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588