Medi-Gas check catalogue

Medi-Gas Check
Range
Your one stop shop for medical pipeline testing
Medical gas detection for safety and peace of mind
www.bedfont.com
ow on
01622 851122 or email [email protected]
1
2
For more information on this product call us no
Contents
Page
Introduction3
The G series monitors
4-5
Moisture and Impurity detection
6
Particulate Matter and Sampling Kits
6
F3004 anaylzers7
Colourmetric Detector Tubes8
MEC range9
Vacuum gauge10
Calibration gas and ‘Also Available’
10
Medigas Qube11
Gas detection tables and corresponding products12-13 ow on 01622 851122 or email [email protected]
3
Medical Gas Pipeline Guidance (HTM02 01)
In 2006 the UK government produced new guidelines in the form of the Health
Technical Memorandum (HTM) 02–01. This guidance details the operation,
management and maintenance of medical gas pipeline systems (MGPS) in
hospitals. This provides a manual for all Quality Control Pharmacists and
Appointed Persons to work from.
The guidelines have placed more emphasis on the verification and validation of the
piped gases to ensure the quality of the gas delivered to the patient. This includes
both monitoring of the plant room and service distribution points as well as at point
of delivery to patients. More information on verification and validation as detailed in
HTM 02-01 is available at www.bedfont.com
To aid in this Bedfont has created a “one-stop-shop” for both fixed and portable gas
detection monitors and their associated accessories for all applications required by
HTM 02-01, including the measurement of:
•Oxygen (O2)
•Nitrous Oxide (N2O)
•Moisture (H2O)
•Oil Content
•Particulate Matter
•Carbon Monoxide (CO)
•Carbon Dioxide (CO2)
•Oxides of Nitrogen (NOx)
•Sulphur Dioxide (SO2)
4
For more information on this product call us no
Medi-Gas Check G210 - N2O, O2, CO2, CO
The G210 has been specifically designed for the accurate measurement of
N2O, O2, CO and CO2 in one easy to use hand-held monitor. The G210
offers the user a quick verification of gas quality on an easy to read digital
screen, with the additional option of being able to enter specific identification
numbers for certain monitoring points around the hospital. The G210 has
the added benefit of being able to identify contaminants in the piped gas.
Complete with data storage and alarms this monitor is ideal for many of your
MGPS verification and testing requirements. This product measures %N2O,
%O2, ppm CO and CO2, is an easy to use monitor with simple calibration, and
has quick verification of gas quality and impurities
Order codes:
G210-CO
G210-CO-CAL
G210 Portable N20, 02, CO2 & CO Analyser
G210 Calibration & Test Kit
MEDI-REG-KIT
pressure regulator kit for G210 for HTM02 standards
G1.16
pressure regulator kit for G210 universal (no probes)
Medi-Gas Check G200 - N2O
The G200 is a low level N2O atmosphesic measurement device. This
portable monitor not only acts as a personal alarm, but will also calculate the
time weighted average (TWA) of an individual’s exposure to N2O. The G200
also acts as a leak detection device and will store up to 1,000 readings to
be used for graphs and data analysis. The G200 is able to provide readings
from 0-1,000ppm in less than 40 seconds and 0-10,000ppm in leak detection
mode, safeguarding both health professionals and patients. This product is
ideal for: dental departments, anaesthetic departments, hospital theatres,
aswell as recovery, veterinary and X-ray departments.
Order codes:
G200
G200 G200/10-CASE G200-CAL PACK (full kit, including monitor, calibration kit,
data, case, spare CO2 filters, spare moisture filters)
(Background N2O monitor)
(Carry case)
(Calibration Kit)
G200/10-DATA (Software kit for G200)
ow on 01622 851122 or email [email protected]
5
Medi-Gas Check G150 - CO2 0 - 20,000 ppm
Specifically designed to monitor CO2 with a range of 0-20,000
ppm, the G150 is ideal for all indoor air quality applications. This
unit has been developed to incorporate the latest technology
and specification requirements, that provide the user with a fast
simple to use and accurate piece of environmental field kit.
Order codes:
G150 G150-O2
G150-O2-RH
Portable monitor for 0-10,000ppm CO2
Portable monitor for 0-10,000ppm CO2 with O2 cell fitted
Portable monitor for 0-10,000ppm CO2 with O2 cell fitted and Relative Humidity
Medi-Gas Check G110 - CO2 0 - 100 percentage
Specifically designed to monitor CO2 in a 0-100 percent range for
all indoor air quality applications, this unit has been developed
to provide the user with a CO2 analyser which monitors multiple
applications, including hospital pipeline gases. Key
features include, quick verification of CO2 levels, built in gas
moisture removal and improved accuracy on CO2 readings.
Order codes:
G110 Portable CO2 0-100% Monitor
G110-O2
Portable CO2 0-100% & O2 0-100% Monitor
G110-O2-RH Portable CO2 0-100%, O2 0-100% & Relative Humidity Monitor
Medi-Gas Check G100 - CO2 and more
The G100 is an easy-to-use, handheld CO2 analyser with
increased accuracy in the 0-20 percent range and a bright,
easy to read display. Readings are stable thanks to inbuilt
moisture removal. Timesaving twin-probes check incubator
top and bottom temperatures and difference simultaneously.
Additionally, the increased memory holds 1000 readings. Options
include O2 and/or RH analysis, temperature probes, data logging,
and USB-link software to download, analyse and export data.
Order codes:
G100
Portable monitor for 0-20% CO2
G100-O2
Portable monitor for 0-20% CO2 with O2 cell fitted
G100-O2-RH Portable monitor for 0-20% CO2 with O2 cell fitted and Relative Humidity
6
For more information on this product call us no
Moisture (H2O) and Impurity Detection
Measuring moisture or dew point is intended to identify contamination of the
pipeline system by water1. Bedfont provides a range of portable dew-point
monitoring and impurity detection devices ensuring quality at the point of drying
and patient administration. The HTM 02-01 stipulates that an electronic dew-point
meter should be used in preference to water content measurements2.
Medi-Gas Check MDM300 portable dewpoint detection
The MDM300 is a portable, high-speed
dew-point hygrometer, ideal for fast, accurate
and repeatable testing on the move. The unit is
able to offer more tests per working hour than
any other monitor on the market, with the added
benefit of being able to transmit data through
Bluetooth. The MDM300 is ideal for all your
portable dew point monitoring.
Order Code: MDM-300
Particulate Matter (PMS-1)
Particulate contamination can occur as a result of building materials, dust and
any foreign bodies entering when installing a new pipeline system or repairing/
maintaining old systems. Also older systems may exhibit particles due to disruption
of the system, such as reverse gas flow, pressure waves or vibration. The presence
of such particles can adversely affect the quality of the delivered gases. Therefore,
tests to confirm their absence are important4.
This test can be carried out using Bedfont’s
Particulate Matter Sampler (PMS) and
specialist particulate membrane filters.
Order Code: PMS1-V
ow on 01622 851122 or email [email protected]
7
Pipeline Sampling Kit (MEDI-REG-KIT)
As part of Bedfont’s commitment to making verification and validation of MGPS as
quick and easy as possible, we supply a sampling kit for use with all our monitors,
detector tubes and equipment.
This kit comprises of a regulator to ensure the gas flow is passed though the
monitor or detector tube at the correct flow, 5 specialist gas probes, and quick
connect fittings for interchanging between gases.
The HTM 02-01 stipulates that when purging and checking the identity of gases
such as N2O, the gas should be discharged in a manner that minimises pollution
and personnel exposure5. Therefore all Bedfont sampling kits can be provided
with different lengths of exhaust tubing to fit all requirements.
Order Code : MEDI-REG-KIT
Medi-Gas Check F3004 (MEDIC- AIR)
The F3004 sets new standards in medical air quality instrumentation. The
F3004, combined with Draeger detector tubes,
can establish levels of carbon monoxide,
carbon dioxide, water vapour, oil, nitrous fumes,
and sulphur dioxide, as well as various easily
oxidized compounds via a Polytest.
An inbuilt electronic sensor with digital reading
measures oxygen content, recorded system
pressures, and temperatures.
The instrument is completely portable,
Order Code- MEDIC-AIR opperating from standard AA batteries.
8
For more information on this product call us no
Colourmetric Detector Tubes
These cost effective detector tubes offer instant measurements of many gases
and vapours. The tubes are easy to read with a sharp, clear colour change and
provide accuracy without the need for calibration. They can be used for a spot
check of the environment as well as for a long term average over a given period
of time. Supplied in a standard box of ten tubes for all your measuring needs.
Our most popular tubes include:
•Carbon Dioxide
•Oil Mist
•Carbon Monoxide
•Xylene
•Formaldehyde
•Nitrogen Oxides
•Water vapour
•Nitrogen Dioxide
Gas Detected
CO CO2 NOx SO2
Water Vapour
Concentration
5 – 100 ppm
300 – 5000 ppm
1 – 50 ppm
1 – 15 ppm
0.05 – 1.0 mg/L
Order Code
DET-CO
DET-CO2
DET-NOX
DET-SO2
DET-H2O
Other Applications Include:
•Vinyl Chloride
•Acetone •Ethanol
•Amines •Trichloroethylene •Sulfur Dioxide
•Ammonia
•Hydrocarbons
•Phosphine
•Benzene
•Hydrogen Chloride
•Nitric Acid
•Butadiene
•Hydrogen Cyanide
•Phenol
•Ozone
•Hydrogen Fluoride
•Methyl Bromide
•Chlorine
•Chlorine Dioxide •Hydrogen Sulfide
•Chlorine Dioxide ow on 01622 851122 or email [email protected]
9
MEC Range
Medical Gas Test & Commissioning Kit
• A complete competence person test kit
• Comprises pressure and flow, AGSS test & commisssioning, fulll anti confusion,
standard particulate & purging.
Order Code: MGTC-KIT
10
For more information on this product call us no
Vacuum Gauge
Bedfont provides a simple and easy to use vacuum gauge to show suction is
present in the vacuum system.
ORDER CODE – MEDI-GAUGE
Calibration kits for all our monitors can be found at
www.bedfont.com/shop/medigascheck or contact us
direct for a quote
Calibration Gasses
A majority of the monitors and instruments that Bedfont supply
require calibration to maintain the credible accuracy that they
provide the user with.
Bedfont supplies these gasses to order, as either a
seperate cannister, or as part of a calibration kit for a
specific monitor.
Bedfont supplies:
Oxygen (O2)
Nitrous Ocide (N2O)
Carbon Monoxide (CO)
Carbon Dioxide (CO2)
Nitrogen (N2)
And more upon request.
Bibliography
1.Department of Health (2006) Medical Gases Health Technical Memorandum 02-01: Medical gas pipeline systems. P.133
2.Department of Health (2006) Medical Gases Health Technical Memorandum 02-01: Medical gas pipeline systems. P.131
3.Department of Health (2006) Medical Gases Health Technical Memorandum 02-01: Medical gas pipeline systems. P.134
4.Department of Health (2006) Medical Gases Health Technical Memorandum 02-01: Medical gas pipeline systems. P.132
5.Department of Health (2006) Medical Gases Health Technical Memorandum 02-01: Medical gas pipeline systems. P.138
6.Department of Health (2006) Medical Gases Health Technical Memorandum 02-01: Medical gas pipeline systems. P.136 Table 29
Quality specifications for medical gas pipeline tests
ow on 01622 851122 or email [email protected]
11
Medi-Gas Qube Oil Content and Polytest
The HTM 02-01 stipulates that oil content should be tested for all new medical/
surgical compressed air plants before use and on a quarterly basis for existing
plants1. It is also recommended that the use of polytest tubes are used as a
general test for contamination of pipelines2.
Detection
Concentration
Order Code
Oil 0.1 mg/m3 – 1.0 mg/m3 MEDI-OIL
PolytestNo DiscolourationMEDI-POLY
In order to do this, Bedfont has the Medi-Gas Qube for testing oil content and
impurities in both O2 and air. Using a specifically designed sampling system and
extremely accurate Oil Impactor, this test can be completed in just 5 minutes.
ORDER CODE : MEDI-QUBE
12
For more information on this product call us no
For more information on this product call us no
ow 13on 01622 851122 or email [email protected] 13
20.9% O2 ± 0.5%
Dental Compressed Air
Carbon Dioxide (CO2)
Helium (He) Oxygen (O2)
Mixture - O2 <30%
Oxygen (O2) From
Liquid or Cylinders
≥70% He
0-100% CO2
0% Then 20.9% O2 ± 0.5%
Minimum 99.5% O2
95-105% O2 Nominal value
of 21-22.5% O2
20.9% O2 ± 0.5%
Medical & Surgical Air
Synthetic Air
50% ± 2% O2
50% ± 2% N20
50% ± 2% O2, 50% ± 2% N20
Nitrous Oxide (N20)
Oxygen (O2) mixture
≥98% N20
-0.2% O2
Minimum 94% O2
Oxygen (O2) from
PSA Plant/Concentrator
Nitrous Oxide (N20)
Purity
Gas
G210
G210
Servo-5200
G210
Servo-5200
Medi-Gas Check G210
Medi-Gas Check Servo-5200
Medi-Gas Check G210
Medi-Gas Check Servo-5200
Medi-Gas Check TM40
Medi-Gas Check TM40
TM40-CO2
TM40-HE
Servo-5200
Servo-5200
Medi-Gas Check Servo-5200
Medi-Gas Check Servo-5200
G210
Medi-Gas Check G210
G210
Servo-5200
Medi-Gas Check Servo-5200
TM40-V
G210
Medi-Gas Check G210
Medi-Gas Check TM40
TM40-V
Medi-Gas Check TM40
Medi-Gas Check G210
Servo-5200
TM40-V
Medi-Gas Check Servo-5200
Medi-Gas Check TM40
Medi-Gas Check G210
G210
Servo-5200
Medi-Gas Check G210
Servo-5200
Order Code
Medi-Gas Check Servo-5200
Medi-Gas Check Servo-5200
Product(s)
Gas Purity Concentrations and Available Bedfont Monitors
now on 01622 851122 or email [email protected]
14
14
For more information on this product call us no
Particulates
Order Code
Product(s)
Vacuum
PMS1-V
PSM1
Particulate Matter
Sampler (PMS)
and Purging Kit
OILMEDIPOLYQUBE
TEST
DET-CO
DET-H2O
MDM300
Medi-Gas
Check G210
Detector
Tube
G210
Medi-Gas Check
MDM300
Medi-Gas Check
DP300
DP-300
DET-CO2
DET-NOX
DET-SO2
Free from visible
particles in a
75L sample
Helium (He)
Oxygen (O2)
Mixture - O2
<30%
Carbon Dioxide Free from visible
particles in a
(CO2)
75L sample
Free from visible
particles in a
75L sample
Oxygen (O2)
from liquid or
cylinders
MEDI-QUBE
Medi-Gas
Qube
No
Discolouration
No
Discolouration
No
Discolouration
No
Discolouration
Free from visible
particles in a
75L sample
No
Discolouration
No
Discolouration
No
Discolouration
Polytest
Synthetic Air
Detector
Tube
Sulphur
Dioxode
(SO2)
No
Discolouration
Detector
Tube
Oxides of
Nitrogen
(NOx)
Free from visible
particles in a
75L sample
Medi-Gas
Check G210
Detector
Tube
G210
Carbon
Dioxide
(CO2)
Dental
Compressed
Air
Carbon
Monoxide
(CO)
No
Discolouration
Water
Free from visible
particles in a
75L sample
MediGas
Qube
Oil
Medical &
Surgical Air
Nitrous Oxide
(N20)
Free from visible
particles in a
75L sample
Nitrous Oxide Free from visible
particles in a
(N2O) Oxygen
75L sample
(O2) Mixture
Oxygen (O2) Free from visible
from PSA Plant/
particles in a
Concentrator
75L sample
Gas
Quality Specifications for Medical Gas Pipeline Tests and Availiable Bedfont Products
Suction
Present
Medi-Gas
Check
Vacuum
Gauge
MEDIMEDI- IGAUGE
GAUGE
Vacuum
ow on 01622 851122 or email [email protected]
15
Contact Bedfont for a free demonstration
www.bedfont.com
Tel:+44 (0)1622 851122
Email: [email protected]
Scientific contributions to health.
Bedfont Scientific Ltd
Station Road, Harrietsham, Maidstone, Kent,
ME17 1JA, England
Tel: +44 (0)1622 851122. Fax: +44 (0)1634
673721
Email: [email protected]
© Bedfont Scientific Limited 2015
Issue 4- January 2016, Part No: MKT333
Bedfont Scientific Limited reserves the right to change or update this literature without prior notice.
Registered in: England and Wales. Registered No: 1289798
16
For more information on this product call us no