Jackson Safety* TrueSight* II Welding Helmet

Jackson Safety* TrueSight* II
Welding Helmet
Balder* Technology + TrueSight* II ADF
= Best in Class Optical Clarity†
Welding is much more than a job. It’s an art that requires
attention to detail, strong engineering skills and craftsmanship
that shows both pride and skill. Taking the art of welding to its
highest level requires the most advanced equipment.
Introducing Jackson Safety* TrueSight* II Variable ADF –
Digital Welding Helmet. Now with Balder* Technology!
The new Jackson Safety* Brand Welding Helmets deliver
enhanced visibility, advanced color recognition and a
whole new vision of what’s possible.
Delivers Best-in-Class optical
clarity† with a true 1/1/1/1 rating by
introducing Balder* Technology
to TrueSight* II’s large viewing
area and digital controls.
As defined by DIN Rating EN 379
†
Now with
designed by
welders for welders
Features
• Optical Classification 1/1/1/1
Jackson Safety* TrueSight* II Welding Helmet
Digital Auto-Darkening Filter
• Variable Shade from 5-8 & 9-13
• 3.25” X 4.00” Viewing Area
• Digital controls (Designed by
welders for welders)
• Weld, Grind & Torch modes
( 3-N-1 welding helmet)
30% Larger Viewing Area††:
Enhances your vision
• Delay & Sensitivity adjustments
• 4 Sensors & Auto Off
Built-in Magnifying
Lens Holder: Available
in 7 focal powers
Three Adjustable
Settings for Shade,
Sensitivity and Delay:
Easy selection with a
gloved hand
Separate Buttons for Grind,
Torch and Weld Modes:
Navigate through modes with
the touch of a gloved hand
• Meets ANSI Z87.1-2010
and CSA Z94.3 Compliant
• DIN Plus Certified
See the difference with Balder* Technology
Auto On/Off: Lens turns off
two hours after last arc
Battery Light Indicator:
Shows when 5 minutes remain
Built-in Retainer:
Easy to install and remove
Solar Assist
AAA Batteries:
Easy access for
replacement
View with Jackson Safety* ADF Helmet
with Balder* Technology
Four Sensors: Reduce blockage possibility during weld
Check out our Auto-Darkening Filter Productivity & Profitability Calculator
online at: www.kcprofessional.com/weldingcalculator
View with competitive ADF
As compared to Jackson Safety’s NexGen ADF.
††
WH70 TrueSight* II Variable Auto-Darkening Filter - Digital with Balder Technology
ACCESSORIES
Code #
Description
29371
HLX Welding Helmet with TrueSight* II Digital ADF – Black
Units/Box
2
30314
HLX Welding Helmet with TrueSight* II Digital ADF – Tattoo
2
30315
HLX Welding Helmet with TrueSight* II Digital ADF – Serpent
2
30316
HLX Welding Helmet with TrueSight* II Digital ADF – Arc Angel
2
30317
HLX Welding Helmet with TrueSight* II Digital ADF – Ace of Spades
2
30319
TrueSight* II ADF Cartridge, 4.5 x 5.25
6
30320
TrueSight* II External Safety Lens
10
30321
TrueSight* II Internal Safety Lens
10
20696
370 Replacement Headgear
6
SCAN HERE TO REGISTER:
Jackson Safety* Auto-Darkening Filter (ADF) Warning
• Provides limited eye protection. Additional protective devices are required for full eye coverage and protection.
*
* Registration needed to be
eligible for 5 yr warranty
• Should not be worn to protect from other hazards including, but not limited to, airborne dusts or mists, liquid splashes, impact hazards and sports activities.
The selection and use of welding personal protective equipment must be based on a hazard assessment of the wearer’s work environment conducted by
the wearer, or for an industrial environment, an appropriately trained individual for your employer or organization in accordance with OSHA regulations 29
CFR 1910.133 and ANSI Standard No. Z87.1. Make sure the ADF is installed properly into the helmet shell and is clean. If the ADF is scratched or damaged,
do not use it and replace it with a new one. Do not use the ADF without the Jackson Safety* brand internal and external safety plates. To clean, wipe only
with a soft cloth. Do not immerse ADF in liquids.
Kimberly-Clark warrants that its products (1) comply with K-C’s standard specifications as of the delivery date to K-C’s authorized distributors/direct purchasers and are warrantied for the following periods from end user’s date of purchase (verified by valid sales receipt) (a) five years
for Balder Technology auto darkening filters; (b) two years for all other auto darkening filters; and (c) one year for powered air purifying respirators; (2) comply with all K-C labeling representations; and (3) are manufactured in compliance with all applicable federal, state, and local laws
in effect at the time and place of manufacture of the products. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. K-C is not liable for any kind of special,
incidental, or consequential damages. K-C’s liability for breach of contract, tort or other cause of action shall not exceed the product purchase price. Purchasers and users are deemed to have accepted the above warranty and
limitation of liability, and cannot change the terms by verbal agreement or by any writing not signed by K-C. To the extent required by applicable law, K-C does not limit its liability for death/injury resulting from K-C’s negligence.
®/*Trademarks of Kimberly-Clark Worldwide, Inc. or its affiliates. Marques déposées de Kimberly-Clark Worldwide, Inc. ou de ses filiales. © KCWW. P15-4434 1/15
Effective January 2015