Fypon Mouldings Catalog - Blackstock Lumber Co., Inc.

Transcription

MOULDINGS
Blackstock Lumber Co., Inc.
1039 Elliott Avenue West • Seattle, WA 98119
Phone (206)
284-1313 • Fax
(206)
281-0062
www.fypon.com
Phone
800.446.3040
• 419.445.0116 U.S. and Canada
www.blackstocklumber.com
PRODUCT CATALOG
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Window and Door Casing
Dentil Moulding
Egg and Dart Moulding
BREAK THE MOULD.
Take the ordinary and make it magnificent with over 100 styles of moulding.
From Massive Cornice Mouldings and Dentil profiles to delicate Florentine Trim
and Chair Rails, authentic architectural styles are captured in rich detail. And
Chair Rail Moulding
Fypon® mouldings are perfect for both interior and exterior applications as well
as new construction and renovation projects. For the ultimate in easy installation,
Fypon Miterless Crown Moulding Systems eliminate the need to figure complex
corner calculations. Although all Fypon mouldings are finished in pre-primed white,
some styles are moulded with a woodgrain texture and color, ready to paint or
stain. These Woodgrain/Stainable products are designated by an S after the part
number. Whether you want a simple, elegant design, or something more elaborate,
Interior Moulding
a variety of styles, sizes and combinations allows you to create a look like no other.
For installation instructions, refer to the back of the comprehensive, full-line
product catalog or visit www.fypon.com.
INTERIOR
EXTERIOR
MLD400
DTLB8X6X6
MLD330
K6M
MLD205
WCH6X36
MLD610
1 ML
PB3X3
MLD611
FLT152
PB3X3
www.fypon.com
Phone 800.446.3040 • 419.445.0116 U.S. and Canada
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
Use the following pages as fuel for your imagination. The large variety of styles and sizes can be applied to the interior
or exterior of a building. The mouldings can be used individually or combined to create a new and distinctive look.
MOULDING ACCESSORIES
Outside Corner
Inside Corner
Divider Block
Rosette
Keystone
SAMPLE CHART
Moulding
UNATTACHED ACCESSORIES
DIMENSIONS
Part Number
Plinth Block/
Rosette
(Page 62 ML)
Keystone
(Page 63 ML,
64 ML)
Moulding
Match
NONE
PB3X3
PB4X4
—
—
12'
NONE
PB3X3
PB4X4
—
—
8'
NONE
PB5X5
PB6X6
—
—
Width
Length
Design
Repeat
/8"
3"
8'
/8"
3"
/8"
5 1/8"
Projection
MLD205-8
7
MLD205-12
7
MLD210-8
7
Door/Window
Door/Window
Door/Window
As shown in the examples below, the first three letters in the item number are the product description. The moulding style appears next as
designated by three numbers. Following the dash after the style number is the moulding length in feet.
IMPORTANT: A urethane base adhesive such as PL Premium® Adhesive must be used on all joints.
See page 6 to order PL Premium Adhesive. For more information, refer to comparison chart on page 7.
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
2 ML
MOULDINGS
HOW TO ORDER MOULDINGS AND ACCESSORIES.
MOULDINGS
IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints.
Flat Trim Moulding (continued)
Flat Trim Moulding
DIMENSIONS
Part Number
DIMENSIONS
See Window and Door
Trim Section/Catalog
See Window and Door
Projection
Width
Length
Arch Moulding Match
(Pages 30 WD - 33 WD)
Plinth Block/
Rosette
(Page 62 ML)
FLT159-12
1"
5 1/2"
12'
6F
PB6X6
—
FLT159-16
1"
5 1/2"
16'
6F
PB6X6
—
—
FLT162-6
1"
7 1/2"
6'
8F
—
10'
—
—
FLT162-8
1"
7 1/2"
8'
8F
—
3"
12'
—
PB3X3
PB4X4
FLT162-14
1"
7 1/2"
14'
8F
—
/4"
6"
12'
—
—
FLT163-16
1 1/2"
7 1/2"
16'
—
—
/4"
5 1/2"
16'
—
—
FLT170-12
1"
9 1/2"
12'
—
—
/4"
8"
8'
—
—
FLT170-16
1"
9 1/2"
16'
—
—
Width
Length
Arch Moulding Match
Plinth Block/
Rosette
(Page 62 ML)
/8"
4 3/4"
12'
—
—
/4"
1 1/2"
12'
—
/4"
2 1/8"
8'
/4"
2 1/8"
/4"
Projection
Part Number
FLT100-12
5
FLT101-12
3
FLT102-8
3
FLT102-10
3
FLT103-12
3
FLT109-12
3
FLT110-16
3
FLT113-8
3
FLT118-8
3
/4"
10"
8'
—
—
FLT172-16
1"
11 1/2"
16'
—
—
FLT119-17
1"
32 1/4"
16' 11"
—
—
FLT175-8
1"
12"
8'
—
—
FLT120-8
7
/8"
6"
8'
—
—
FLT175-12
1"
12"
12'
—
—
FLT120-8S
7
/8"
6"
8'
—
—
FLT177-8
1
/2"
1"
8'
—
—
FLT122-16
3
/4"
3 1/2"
16'
—
—
FLT178-8
1
/2"
14"
8'
—
—
FLT123-8
1"
48"
8'
—
—
FLT179-12
1"
16"
12'
—
—
FLT124-16
1"
1"
16'
—
—
FLT180-12
1"
24"
12'
—
—
FLT125-8
1"
36"
8'
—
—
FLT181-8
5
/8"
24"
8'
—
—
FLT131-16
1
/2"
3"
16'
—
—
FLT182-12
1 1/2"
12 1/4"
12'
—
—
FLT152-8
1"
3 1/2"
8'
4F
—
FLT183-12
1 1/2"
5 1/2"
12'
—
—
FLT152-12
1"
3 1/2"
12'
4F
—
FLT183-16
1 1/2"
5 1/2"
16'
—
—
FLT152-16
1"
3 1/2"
16'
4F
—
FLT184-16
1 1/2"
1 1/2"
16'
—
—
FLT153-12
1"
4"
12'
—
—
FLT185-12
1 1/2"
16 1/2"
12'
—
—
FLT159-8
1"
5 1/2"
8'
6F
PB6X6
CHART CONTINUED ON FOLLOWING PAGE.
Indicates Woodgrain/Stainable Products
3 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Flat Trim Moulding (continued)
DIMENSIONS
Part Number
See Window and Door
Width
Length
Arch Moulding Match
Plinth Block/
Rosette
(Page 62 ML)
/4"
7 1/4"
16'
—
—
/4"
7 1/2"
16'
—
—
Projection
FLT186-16
3
FLT187-16
3
FLT188-16
3
/4"
5 1/4"
16'
—
—
FLT190-12
2"
4"
12'
—
—
FLT193-6
1 1/2"
14 1/2"
6'
—
—
FLT194-10
1 1/2"
3 1/2"
10'
—
—
FLT200-10
1 13/16"
5 3/4"
10'
—
—
Flat Panel
DIMENSIONS
Part Number
FLT40X96
WDP48X73F
FLT50X50
WDP88X55F
Projection
Width
Length
1"
40"
96"
1 1/8"
48"
73"
/4"
50"
50"
1 1/8"
88"
55"
3
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
4 ML
MOULDINGS
Moulding - Brickmould Trim
DIMENSIONS
See Window and Door Trim Section/Catalog
Projection
Width
Thickness
Length
Keystone
(Page 63 ML)
Arch Trim Match
(Page 34 WD)
MLDWM180-8
1 1/4"
2"
1 1/16"
8'
KWM180M
—
MLDWM180-16
1 1/4"
2"
1 1/16"
16'
KWM180M
—
MLDWM181-16
13
/16"
2"
/8"
16'
—
ARWM181
MLDWM182-12
1 1/4"
3"
1 1/16"
12'
—
—
MLDWM183-16
1 1/2"
2 1/8"
1 1/4"
16'
—
—
Part Number
5
R4Board - Insulating Flat Trim Moulding
DIMENSIONS
Projection
Width
Length
Plinth Block
(Page 62 ML)
Flat Trim Match
(Pages 3 ML)
R4153
1"
4"
12'
—
FLT153
R4159
1"
5 1/2"
12'
PB6X6
FLT159
R4162
1"
7 1/2"
14'
—
FLT162
R4170
1"
9 1/2"
12'
—
FLT170
R4175
1"
12"
12'
—
FLT175
Part Number
5 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Moulding
DIMENSIONS
Part Number
Width
Length
Design
Repeat
/8"
3"
8'
NONE
Projection
Plinth Block/
Rosette
(Pages 62 ML)
Keystone
(Pages 63ML- 64ML)
Matching
Accessories
PB3X3
PB4X4
—
—
MLD205-8
7
MLD205-12
7
/8"
3"
12'
NONE
PB3X3
PB4X4
—
—
MLD206-5
1"
7 1/4"
5'
NONE
—
—
—
MLD207-16
1"
5 1/4"
16'
NONE
PB6X6
—
—
MLD208-16
1"
7 1/4"
16'
NONE
—
—
—
MLD209-14
1 1/2"
24"
14'
NONE
—
—
—
/8"
5 1/8"
8'
NONE
PB5X5
PB6X6
—
—
/8"
5 1/8"
10'
NONE
PB5X5
PB6X6
—
—
Door/Window
Door/Window
Fluted Casing
Fluted Casing
Fluted Casing
MLD210-8
7
MLD210-10
7
Door/Window
Door/Window
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
6 ML
MOULDINGS
Moulding (continued)
DIMENSIONS
Part Number
Width
Length
Design
Repeat
/8"
5 3/8"
8'
NONE
/4"
5 1/8"
8'
Projection
MLDR210-8
7
Plinth Block/
Rosette
(Pages 62 ML)
Keystone
(Pages 63ML- 64ML)
Matching
Accessories
PB5X5
PB6X6
—
—
NONE
PB5X5
PB6X6
—
MLD211-16
(Rosette)
PB5X5 Plinth Block/
Rosette. Moulded in
on one end.
MLDR211-8
3
(Rosette)
(Page 6 ML)
PB5X5 Plinth Block/
Rosette. Moulded in
on one end.
MLD211-16
3
/4"
5 1/8"
16'
NONE
PB5X5
PB6X6
—
—
MLD214-12
2"
2 7/8"
12'
NONE
—
—
—
MLD215-12
1 3/4"
3 1/2"
12'
NONE
PB215
K4TM
Matches
All 4M
Decorative
Arches
Door/Window
Door/Window
Door/Window
See Window
and Door Trim
Section/Catalog
(Pages 25 WD,
30 WD, 31 WD)
MLD220-12
1 3/4"
5 1/2"
12'
NONE
PB220
K6TM
Door/Window
Matches
All 6M
Decorative
Arches
See Window
and Door Trim
Section/Catalog
(Pages 26 WD,
30 WD, 32 WD)
MLD220-16
1 3/4"
5 1/2"
16'
NONE
PB220
K6TM
Door/Window
7 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Part Number
MLD221-8
Projection
Width
Length
Design
Repeat
Plinth Block/
Rosette
(Pages 62 ML)
Keystone
(Pages 63ML- 64ML)
Matching
Accessories
13/4"
7"
8'
NONE
—
K221M
Door/
Window
Crossette
Trim Match
Door/Window
See Window
and Door Trim
Section/Catalog
(Page 35 WD)
MLD221-16
13/4"
7"
16'
NONE
—
K221M
MLD222-16
2"
7"
16'
NONE
—
—
—
MLD223-16
2 1/2"
14 1/2"
16'
NONE
—
—
—
MLD224-12
1 1/2"
5 1/2"
12'
NONE
—
—
—
MLD225-12
11/2"
8 1/2"
12'
NONE
—
—
—
Door/Window
Door/Window
Door/Window
Door/Window
Door/Window
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
8 ML
MOULDINGS
DIMENSIONS
Projection
Width
Length
Design
Repeat
Plinth Block/
Rosette
(Pages 62 ML)
Keystone
(Pages 64ML)
Matching
Accessories
MLD226-8
11/2"
5 1/2"
8'
NONE
—
K226M
—
MLD226-10
11/2"
5 1/2"
10'
NONE
—
K226M
—
MLD226-12
11/2"
5 1/2"
12'
NONE
—
K226M
—
MLD226-16
11/2"
5 1/2"
16'
NONE
—
K226M
—
MLD227-16
11/2"
9"
16'
NONE
—
K227M
—
MLD228-8
2"
6 3/8"
8'
NONE
—
—
—
MLD228-16
2"
6 3/8"
16'
NONE
—
—
—
MLD229-10
1 9/16"
7 7/8"
10'
NONE
—
—
—
/4"
3 1/4"
16'
NONE
PB4X4
—
—
Part Number
Door/Window
Door/Window
Door/Window
Door/Window
Door/Window
Door/Window
Door/Window
Door/Window
MLD230-16
3
Door/Window
9 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
DIMENSIONS
Plinth Block/
Rosette
Keystone
(Pages 62ML- 63ML) (Pages 63ML- 64ML)
Projection
Width
Length
Design
Repeat
MLD231-12
1"
1 3/4"
12'
NONE
—
—
—
MLD232-16
19/16"
7 7/8"
16'
NONE
—
—
—
MLD233-12
2 1/4"
7"
12'
NONE
—
—
—
MLD234-16
1"
3 1/2"
16'
NONE
PB4X4
—
—
MLD235-16
7
/8"
3 1/4"
16'
NONE
PB4X4
—
—
MLD236-16
2"
5 1/2"
16'
NONE
PB220
—
—
MLD237-16
1 1/8"
3 1/2"
16'
NONE
PB215
—
—
Part Number
Matching
Accessories
Casing
Door/Window
Door/Window
Door/Window
Casing
Window/Door
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
10 ML
MOULDINGS
MOULDINGS
DIMENSIONS
Part Number
Width
Length
Design
Repeat
Plinth Block/
Rosette
(Pages 62 ML)
Keystone
(Pages 63ML- 64ML)
Matching
Accessories
/4"
3"
16'
NONE
PB3X3
—
—
3 1/4"
4"
8'
NONE
—
—
DTLB6X4X6
Projection
MLD239-16
3
MLD240-8
See Decorative
Millwork
Section/Catalog
Cornice
(Page 19 DM)
MLD241-16
1 5/8"
4 5/8"
16'
NONE
—
—
—
MLD242-16
1 1/8"
5"
16'
NONE
PB6X6
—
—
MLD243-16
1 1/16"
6 3/16"
16'
NONE
—
—
—
MLD244-12
1 5/16"
5 5/8"
12'
NONE
—
—
—
MLD245-12
1 15/16"
8 13/16"
12'
NONE
—
—
—
Window/Door
Casing
Window/Door
Casing
Window/Door
Casing
Door/Window
Door/Window
11 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
DIMENSIONS
Projection
Width
Length
Design
Repeat
Plinth Block/
Rosette
(Pages 62 ML)
Keystone
(Pages 63ML- 64ML)
Matching
Accessories
MLD246-16
3 3/8"
9 1/8"
16'
NONE
—
—
—
MLD247-16
1 3/8"
8 11/16"
16'
NONE
—
—
—
MLD248-16
1 1/16"
6 1/8"
16'
NONE
—
—
—
MLD250-8
1 3/4"
4 1/2"
8'
NONE
—
—
DTLB6X4X6
Part Number
Fascia
Base Board
with Cap
Door/Window
See Decorative
Millwork
Section/Catalog
Door/Window
(Page 19 DM)
MLD250-10
1 3/4"
4 1/2"
10'
NONE
—
—
MLD250-12
1 3/4"
4 1/2"
12'
NONE
—
—
/8"
6"
12'
NONE
—
—
—
/8"
7 1/2"
14'
NONE
—
—
—
Door/Window
Door/Window
MLD251-12
7
MLD252-14
7
Beaded
Beaded
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
12 ML
MOULDINGS
MOULDINGS
DIMENSIONS
Projection
Width
Length
Design
Repeat
Plinth Block/
Rosette
(Pages 62 ML)
Keystone
(Pages 63ML- 64ML)
Matching
Accessories
MLD253-16
2 3/8"
7 5/8"
16'
NONE
—
—
—
MLD270-10
1 1/4"
5 5/8"
10'
NONE
—
—
—
Length
Design
Repeat
/4"
5'
1 1/2"
Part Number
Crown Fascia
Door/Window
Moulding
DIMENSIONS
Part Number
Projection
MLD303-5
5
MLD304-5
5
MLD304-8
5
Width
Tooth and
Space
/8"
1 1/4"
/8"
1 1/4"
1 1/4"
5'
2 1/2"
/8"
1 1/4"
1 1/4"
8'
2 1/2"
3
Small Dentil
Small Dentil
Small Dentil
13 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Moulding
UNATTACHED
ACCESSORIES
See Decorative
Millwork
Section/Catalog
DIMENSIONS
Part Number
MLD310-8
Projection
Width
Tooth
and
Space
Length
Design
Repeat
Pitch
Dentil Block
Moulding Match
1 1/4"
4 1/2"
1 1/2"
8'
3"
—
DTLB6X4X6
MLD310-LP9
MLD310-LP10
MLD310-LP12
MLD310-RP9
MLD310-RP10
MLD310-RP12
Classic Dentil
(Page 19 DM)
MLD310-12
1 1/4"
4 1/2"
1 1/2"
12'
3"
—
—
MLD310-16
1 1/4"
4 1/2"
1 1/2"
16'
3"
—
—
MLD310-LP9
1 1/4"
4 1/2"
1 17/32"
Tooth/
1 15/32"
Space
8' 1/8"
3"
9/12
—
MLD310
MLD310-LP10
1 1/4"
4 1/2"
1 17/32"
Tooth/
1 15/32"
Space
8' 1/8"
3"
10/12
—
MLD310
MLD310-LP12
1 1/4"
4 1/2"
1 17/32"
Tooth/
1 15/32"
Space
8' 1/8"
3"
12/12
—
MLD310
MLD310-RP9
1 1/4"
4 1/2"
1 17/32"
Tooth/
1 15/32"
Space
8' 1/8"
3"
9/12
—
MLD310
MLD310-RP10
1 1/4"
4 1/2"
1 17/32"
Tooth/
1 15/32"
Space
8' 1/8"
3"
10/12
—
MLD310
MLD310-RP12
1 1/4"
4 1/2"
1 17/32"
Tooth/
1 15/32"
Space
8' 1/8"
3"
12/12
—
MLD310
MLD311-16
5 3/8"
7 3/4"
—
16'
NONE
—
—
—
Classic Dentil
Classic Dentil
Dentil Left Pitch
Dentil Left Pitch
Dentil Left Pitch
Dentil Right Pitch
Dentil Right Pitch
Dentil Right Pitch
Fascia
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
14 ML
MOULDINGS
UNATTACHED
ACCESSORIES
See Decorative
Millwork
Section/Catalog
DIMENSIONS
Projection
Width
Tooth
and
Space
Length
Design
Repeat
Pitch
Dentil Block
Moulding Match
MLD312-16
6 1/2"
7 5/8"
—
16'
NONE
—
—
—
MLD313-8
2 1/4"
2 3/8"
1"
8'
2"
—
—
—
MLD320-8
1 5/8"
5 3/4"
2 1/4"
8'
4 1/2"
—
—
Left Pitch
Application
Part Number
Fascia
Dentil
Classic Dentil
MLD320-LP10,
MLD320-LP12
Right Pitch
Application
MLD320-RP10,
MLD320-RP12
MLD320-12
1 5/8"
5 3/4"
2 1/4"
4 1/2"
—
—
MLD320-16
1 5/8"
5 3/4"
2 1/4" 16' 1 1/2" 4 1/2"
—
—
MLD320-LP10
1 5/8"
5 3/4"
1 1/8"
10/12
—
MLD320-LP12
1 5/8"
5 3/4"
1 1/8" 12' 5 1/2" 4 1/2"
12/12
Left
Side
App.
—
MLD320-RP10
1 5/8"
5 3/4"
1 1/8"
10/12
—
MLD320-RP12
1 5/8"
12'
(Page 15 ML)
Classic Dentil
Classic Dentil
8'
4 1/2"
MLD320
(Page 15 ML)
Classic Dentil
Dentil Left Pitch
8'
4 1/2"
MLD320
(Page 15 ML)
Classic Dentil
5 3/4"
1 1/8" 12' 5 1/2" 4 1/2"
Dentil Right Pitch
12/12
Right
Side
App.
—
15 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
UNATTACHED
ACCESSORIES
See Decorative
Millwork
Section/Catalog
DIMENSIONS
Part Number
MLD330-12
Projection
Width
Tooth
and
Space
Length
Design
Repeat
Pitch
Dentil Block
Moulding Match
1 5/8"
7"
2"
12'
4"
—
DTLB8X6X6
Left Pitch
Application
Dentil Fascia
MLD330-LP10
(Page 20 DM)
Right Pitch
Application
MLD330-RP10
(Page 16 ML)
MLD330-LP10
1 5/8"
5 7/16"
1 1/2"
12'
3"
Dentil Fascia
Left Side Pitched
Application
MLD330-RP10
1 5/8"
5 7/16"
1 1/2"
12'
3"
Dentil Fascia
Right Side Pitched
Application
MLD331-16
1 5/8"
9 1/2"
MLD332-8
1 5/8"
5"
10/12
Left
Side
App.
—
10/12
Right
Side
App.
—
—
—
—
—
DTLB6X4X6
—
2 1/4" 16' 1 1/2" 4 1/2"
MLD330-12
(Page 16 ML)
MLD330-12
(Page 16 ML)
Dentil Fascia
2"
8'
4"
Dentil Fascia
(Page 19 DM)
MLD333-12
1 3/16"
11 1/2"
MLD334-12
4"
15"
2 3/4" 12' 4 1/2" 5 1/2"
—
—
—
12' 4"
—
—
—
Dentil Fascia
Dentil Fascia
9"
Tooth/
12"
Space
21"
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
16 ML
MOULDINGS
UNATTACHED
ACCESSORIES
See Decorative
Millwork
Section/Catalog
DIMENSIONS
Part Number
Tooth
and
Space
Length
Design
Repeat
Pitch
Dentil Block
Moulding Match
3 11/16"
Tooth/
3 9/16"
Space
12'
7 1/4"
—
—
—
9 3/8"
2 1/2"
Tooth/
2 1/2"
Space
16'
5"
—
—
—
2 3/8"
4 7/8"
4"
16'
7 7/8"
—
—
—
/8"
3 1/2"
2 3/16" 8' 3 3/4" 3 11/16"
Tooth/
1 1/2"
Space
—
—
—
1 1/4"
3 1/4"
—
—
MLD351-LP10
MLD351-RP10
Projection
Width
MLD335-12
3 3/8"
6 1/8"
MLD336-16
3 1/8"
MLD337-16
Classic Dentil
Dentil Fascia
Dentil Fascia
MLD350-8
7
Dentil Block
MLD351-8
3 1/2"
8' 2"
7"
Dentil Block
(Pages 17 ML)
MLD351-LP10
1 1/4"
3 1/4"
3 1/2" 8' 4 1/4"
7"
Dentil Block
Left Side Pitched
Application
MLD351-LP12
1 1/4"
3 1/4"
3 1/2"
Dentil Block
Left Side Pitched
Application
8' 4"
7"
10/12
Left
Side
App.
—
MLD351-8
(Page 17 ML)
12/12
Left
Side
App.
17 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
UNATTACHED
ACCESSORIES
See Decorative
Millwork
Section/Catalog
DIMENSIONS
Part Number
MLD351-RP10
Projection
Width
Tooth
and
Space
1 1/4"
3 1/4"
3 1/2" 8' 4 1/4"
Length
Design
Repeat
7"
Dentil Block
Right Side Pitched
Application
MLD351-RP12
1 1/4"
3 1/4"
3 1/2"
8' 4"
7"
Dentil Block
Right Side Pitched
Application
Pitch
Dentil Block
Moulding Match
10/12
Right
Side
App.
—
MLD351-8
12/12
Right
Side
App.
—
(Page 13 ML)
MLD351-8
(Page 17 ML)
MLD352-8
2"
3 1/2"
2 3/16" 8' 3 3/4" NONE
Tooth/
1 1/2"
Space
—
—
—
MLD353-8
1 1/4"
4 7/16"
4 3/8"
8 3/4"
—
—
—
MLD354-12
1"
3 1/6"
1 5/8" 12' 2 1/4" 3 1/4"
—
DTLB3X3X3
—
Dentil Block
8' 1/4"
Dentil Block
Dentil
(Page 15 DM)
MLD355-8
/8"
2 1/2"
1 3/8"
Tooth/
3
/4"
Space
8'
2 1/8"
NONE
—
—
1 3/8"
1 3/4"
1 1/4"
Tooth/
1 1/8"
Space
12'
2 3/8"
NONE
—
—
5
Dentil Moulding
MLD356-12
Dentil Moulding
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
18 ML
MOULDINGS
UNATTACHED
ACCESSORIES
See Decorative
Millwork
Section/Catalog
DIMENSIONS
Part Number
Projection
Width
MLD360-8
3 1/2"
3 3/4"
MLD361-12
10 1/4" 17 3/8"
MLD362-16
4 3/4"
MLD364-12
8 11/16" 11 5/16"
Beveled Dentil Block
Tooth
and
Space
Length
Design
Repeat
Pitch
Dentil Block
Moulding Match
3 3/4"
Tooth/
4 1/4"
Space
8'
8"
—
—
—
—
12'
NONE
—
—
—
2 1/2"
Tooth/
2"
Space
16'
4 1/2"
—
—
—
—
12'
NONE
—
—
—
Combination Cove
8 3/8"
Dentil
Crown Fascia
MLD365-16
5"
5"
2 1/4"
16'
4 1/2"
NONE
—
—
MLD370-8
6 1/2"
7 1/2"
4 3/4"
Tooth/
14 1/2"
Space
8'
19"
—
—
—
MLD371-16
6 1/2"
11"
—
16'
NONE
—
—
—
Dentil Block Soffit
Crown Fascia
19 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
UNATTACHED
ACCESSORIES
See Decorative
Millwork
Section/Catalog
DIMENSIONS
Part Number
MLD372-14
Projection
Width
Tooth
and
Space
Length
Design
Repeat
Pitch
Dentil Block
Moulding Match
8 1/4"
13 7/8"
—
14'
NONE
—
—
—
Fascia
Moulding
DIMENSIONS
Part Number
Projection
Height
MLD400-8
2 15/16" 2 11/16"
MLD400-8S
2 15/16" 2 11/16"
MLD400-12S
2 15/16" 2 11/16"
Crown Dentil
Crown Dentil
Crown Dentil
Tooth
and
Space
Length
9
/16"
Tooth/
3
/8"
Space
8'
9
/16"
Tooth/
3
/8"
Space
8' 1/4"
9
/16" 12' 1/4"
Tooth/
3
/8"
Space
Design
Repeat
/16"
15
/16"
15
Outside Corner
Inside Corner
Divider Block
MOC400
MIC400
MDB400
(Page 53 ML)
(Page 53 ML)
(Page 53 ML)
MOC400S*
MIC400S*
MDB400S*
(Page 54 ML)
(Page 54 ML)
(Page 54 ML)
/16"
15
*Indicates Woodgrain/Stainable accessories.
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
20 ML
MOULDINGS
DIMENSIONS
Part Number
Tooth
and
Space
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
/4"
8'
1 1/2"
—
—
—
/4"
12'
1 1/2"
—
—
—
/4"
16'
1 1/2"
—
—
—
MOC405
MIC405
MDB405
(Page 54 ML)
(Page 54 ML)
(Page 54 ML)
2"
—
—
—
8'
3"
—
—
—
1 1/2"
12'
3"
—
—
—
1 1/2"
16'
3"
—
—
—
Projection
Height
MLD404-8
2 1/2"
3 3/4"
3
MLD404-12
2 1/2"
3 3/4"
3
MLD404-16
2 1/2"
3 3/4"
3
MLD405-12
3 11/16"
5 3/4"
—
MLD406-16
3 3/8"
4"
3
/4"
Tooth/
1 1/4"
Space
16'
MLD410-8
3 1/4"
6 7/8"
1 1/2"
MLD410-12
3 3/4"
6 7/8"
MLD411-16
4 1/2"
7"
Crown Dentil
Crown Dentil
Crown Dentil
12' 6" 12 1/2"
Crown Dentil
Crown Dentil
Crown Dentil
Crown Dentil
Crown Dentil
21 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
DIMENSIONS
Part Number
Projection
Height
Tooth
and
Space
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
MLD412-16
5 3/8" 10 21/32"
3"
Tooth/
1"
Space
16'
4"
—
—
—
MLD413-12
8 1/2"
11 1/8"
3"
Tooth/
2 7/8"
Space
12'
5 7/8"
—
—
—
MLD419-12
6 7/8"
14 5/8"
1 1/2"
12' 5"
3"
—
—
—
MLD420-8
6 15/16" 14 5/16"
1 1/2"
8'
3"
—
—
—
2"
Tooth/
4"
Space
12'
6"
—
—
—
—
—
—
MIC423
MDB423
Dentil
Dentil
Dentil
Massive
Crown Dentil
MLD421-12
10"
14 1/2"
MLD422-12
4 1/2"
4 5/8"
MLD423-12
2 15/16"
5"
Dentil Cornice
Crown Dentil
9
/16" 12' 3/8" 1 5/16"
Tooth/
11
/16"
Space
—
12'
6 1/4"
MOC423
(Page 55 ML)
Egg and Dart
(Page 55 ML)
(Page 55 ML)
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
22 ML
MOULDINGS
MOULDINGS
DIMENSIONS
Part Number
Tooth
and
Space
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
11' 5"
13 1/2"
—
—
—
1 3/4" 12' 2 1/2" 2 5/8"
Tooth/
7
/8"
Space
—
—
—
Projection
Height
MLD425-12
4 1/4"
9 1/2"
5
/8"
Tooth/
13
/16"
Space
MLD430-12
5 1/2"
8 1/8"
MLD431-8
1 13/16"
3"
5
/8"
Tooth/
3
/8"
Space
MLD431-12
1 13/16"
3"
5
/8" 12' 1/4"
Tooth/
3
/8"
Space
MLD431-8S
1 13/16"
3"
/8"
Tooth/
3
/8"
Space
MLD431-12S
1 13/16"
3"
/8" 12' 1/4"
Tooth/
3
/8"
Space
Dentil Garland
Classic Crown
Dentil
Crown Dentil
Crown Dentil
Crown Dentil
Crown Dentil
5
5
8'
8'
1"
1"
1"
1"
MOC1
(Page 56 ML)
MOC1
(Page 56 ML)
MOC1S*
(Page 56 ML)
MOC1S*
(Page 56 ML)
MIC1
(Page 56 ML)
MIC1
(Page 56 ML)
MIC1S*
(Page 56 ML)
MIC1S*
(Page 56 ML)
MDB1
(Page 56 ML)
MDB1
(Page 56 ML)
MDB1S*
(Page 56 ML)
MDB1S*
(Page 56 ML)
23 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
DIMENSIONS
Part Number
Projection
Height
Tooth
and
Space
Length
Design
Repeat
Outside Corner
/2"
8' 1/4"
1"
MOC432
(Page 57 ML)
(Page 57 ML)
/2"
8' 1/4"
1"
MOC432S*
/2"
12' 1/4"
1"
MOC432
(Page 57 ML)
(Page 57 ML)
/2"
12' 1/4"
1"
Inside Corner
Divider Block
MIC432
MDB432
MIC432S*
MDB432S*
MIC432
MDB432
MOC432S*
MIC432S*
MDB432S*
MLD432-8
3 15/16" 4 7/16"
1
MLD432-8S
3 15/16" 4 7/16"
1
MLD432-12
3 15/16" 4 7/16"
1
MLD432-12S
3 15/16" 4 7/16"
1
MLD434-16
3 3/4"
16"
9"
Tooth/
12"
Space
15' 9"
21"
—
—
—
MLD435-16
9"
10"
3 1/2"
Tooth/
3 7/8"
Space
16'
7 3/8"
—
—
—
MLD436-16
5 1/2"
7"
—
16'
NONE
—
—
—
MLD437-16
2 1/4"
9"
3 1/2"
Tooth/
3 1/2"
Space
16'
7"
—
—
—
Crown Dentil
Crown Dentil
Crown Dentil
Crown Dentil
Dentil Fascia
Crown Wrap Dentil
(Page 57 ML)
(Page 57 ML)
(Page 57 ML)
(Page 57 ML)
(Page 57 ML)
(Page 57 ML)
(Page 57 ML)
(Page 57 ML)
Crown Dentil
Dentil Fascia
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
24 ML
MOULDINGS
MOULDINGS
DIMENSIONS
Tooth
and
Space
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
4"
Tooth/
2 5/8"
Space
12'
6 5/8"
—
—
—
11 3/4"
—
8'
NONE
—
—
—
18"
15 3/4"
1 1/2"
Tooth/
1"
Space
8'
2 1/2"
—
—
—
MLD449-16
7 1/4"
8 3/8"
—
16'
NONE
—
—
—
MLD450-16
10"
11 1/2"
—
16'
NONE
—
—
—
Part Number
Projection
Height
MLD440-12
6 11/16"
7 1/4"
MLD446-8
4"
Crown Dentil
Fascia
MLD447-8
Crown Dentil
Crown Moulding
Crown Moulding
25 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Moulding
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
3 1/8"
3 1/8"
16'
NONE
—
—
—
MLD452-8
2"
3"
8'
NONE
MLD452-8S
2"
3"
8'
NONE
MLD452-12
2"
3"
12'
NONE
Part Number
MLD451-16
Crown
3 /8"
1
192"
3 1/8"
Crown
Crown
Crown
MOC1
(Page 56 ML)
MOC1S*
(Page 56 ML)
MOC1
MIC1
(Page 56 ML)
MIC1S*
(Page 56 ML)
MIC1
MDB1
(Page 56 ML)
MDB1S*
(Page 56 ML)
MDB1
(Page 56 ML)
(Page 56 ML)
(Page 56 ML)
MLD453-16
4 11/16" 6 11/16"
16'
NONE
—
—
—
MLD454-12
3 25/32" 3 15/16"
12'
NONE
—
—
—
MLD455-12
1 1/4"
12'
NONE
—
—
—
Crown
Crown
1 15/32"
Crown
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
26 ML
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
MLD456-12
3"
4 7/16"
12'
NONE
—
—
—
MLD456-16
3"
4 7/16"
16'
NONE
—
—
—
MLD457-12
6 7/8"
7 5/8"
12'
NONE
—
—
—
MLD458-12
6 5/16"
12 1/8"
12'
NONE
—
—
—
MLD459-12
4 7/8"
8 5/8"
12'
NONE
—
—
—
MLD460-12
4 3/8"
5 1/8"
12'
NONE
—
—
—
MLD461-8
9 1/2"
19 3/4"
8'
2 15/16"
—
—
—
MLD462-16
2 3/4"
3 1/4"
16'
NONE
—
—
—
Part Number
Crown
Crown
Massive Crown
Convex Crown
Crown Fascia
Classic Crown
Crown Dentil
27 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
MLD470-12
10"
6"
12'
NONE
—
—
—
MLD471-12
7"
4 3/4"
12'
NONE
—
—
—
MLD472-12
11 1/4" 15 1/2"
12'
NONE
—
—
—
MLD480-12
7 5/8"
9 1/8"
12'
NONE
—
—
—
MLD481-12
14"
17 1/2"
12'
NONE
—
—
—
MLD490-12
5 15/16"
5 7/16"
11' 5"
13 1/2"
MOC490
MIC490
MDB490
MLD491-12
6 3/8"
5 7/16"
12'
4"
Part Number
Massive Crown
Massive Crown
Crown Fascia
Massive Crown
Ships in two pieces.
Crown
Crown Florentine
Acanthus Leaf
(Page 59 ML)
MOC491
(Page 59 ML)
(Page 59 ML)
MIC491
(Page 59 ML)
(Page 59 ML)
MDB491
(Page 59 ML)
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
28 ML
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
MLD492-12
2 9/16"
3 1/4"
12' 1"
2 3/8"
—
—
—
MLD493-12
5 7/16"
6 3/4"
12'
4"
MOC493
(Page 60 ML)
(Page 60 ML)
MIC493
MDB493
MLD494-12
2"
3 3/16"
12'
5 1/2"
—
—
—
MLD495-16
5 3/8"
10 1/4"
16'
7 3/4"
—
—
—
MLD496-16
2 15/16"
5 1/4"
16'
2"
—
—
—
Part Number
Crown
Crown Leaf
(Page 60 ML)
Crown Florentine
Leaf Cove
Crown Key
29 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Moulding
See Decorative Millwork
Section/Catalog
DIMENSIONS
Part Number
MLD505-8
Projection
Height
Length
Design
Repeat
Dentil Block
Moulding Match
3 3/8"
13"
8'
NONE
DTLB12X10X16
—
Massive Fascia
(Page 22 DM)
MLD506-16
3"
16 1/2"
16'
NONE
—
—
MLD507-16
5 1/4"
10"
16'
NONE
—
—
3 5/8"
8 1/4"
12'
NONE
—
—
3 1/4"
5 7/16"
16'
NONE
—
—
MLD510-12
4 3/8"
5 1/2"
12'
NONE
—
—
MLD511-12
5 3/4"
6 9/16"
12'
NONE
—
—
Fascia
Fascia
MLD508-12
Fascia
MLD509-16
Fascia
Fascia
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
30 ML
MOULDINGS
Section/Catalog
DIMENSIONS
Projection
Height
Length
Design
Repeat
Dentil Block
Moulding Match
MLD512-16
8 1/2"
12 1/8"
16'
NONE
—
—
MLD520-16
6 7/16"
8 1/16"
16'
NONE
—
—
MLD521-8
5"
13 1/8"
8'
NONE
—
—
MLD522-16
1 5/8"
14 7/8"
16'
NONE
—
—
MLD523-16
2"
5 3/8"
16'
NONE
—
—
MLD524-16
7 7/8"
12 1/8"
16'
NONE
—
—
MLD525-16
4 1/4"
16 1/8"
16'
NONE
—
—
Part Number
Fascia
Deluxe Fascia
Sign Fascia
Sign Fascia
Fascia
Fascia
Fascia
31 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Section/Catalog
DIMENSIONS
Projection
Height
Length
Design
Repeat
Dentil Block
Moulding Match
MLD526-16
5"
6 1/2"
16'
NONE
—
—
MLD527-16
3 1/2"
7 1/2"
16'
NONE
—
—
MLD528-12
10 1/8" 15 1/4"
12'
NONE
—
—
MLD529-12
6 7/16" 7 15/16"
12'
NONE
—
—
MLD530-8
1 1/2"
8'
NONE
—
MLD531-8
Part Number
Fascia
Fascia
Crown
Fascia
12 5/8"
(Page 32 ML)
Fascia
MLD531-8
1 1/2"
12"
8'
NONE
—
MLD530-8
(Page 32 ML)
Fascia
MLD532-16
2"
13 1/2"
16'
17 1/8"
—
—
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
32 ML
MOULDINGS
Section/Catalog
DIMENSIONS
Projection
Height
Length
Design
Repeat
Dentil Block
Moulding Match
MLD533-12
5 1/2"
17"
12'
NONE
—
—
MLD534-12
8 7/8"
19 1/8"
12'
NONE
—
—
MLD535-16
9"
9 1/2"
16'
NONE
—
—
MLD536-12
8 1/2"
15 3/8"
12'
NONE
—
—
/4"
3 1/2"
16'
NONE
—
—
MLD538-16
1 5/8"
8 3/4"
16'
NONE
—
—
MLD539-16
4 1/2"
12"
16'
NONE
—
—
Part Number
Step Moulding
Fascia
Fascia
Crown
MLD537-16
3
Fascia
Fascia
Fascia
33 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Section/Catalog
DIMENSIONS
Projection
Height
Length
Design
Repeat
Dentil Block
Moulding Match
MLD540-16
4"
15 1/8"
16'
NONE
—
—
MLD541-16
1 3/16"
8 1/8"
16'
NONE
—
—
MLD542-16
2 3/4"
5 1/2"
16'
NONE
—
—
MLD543-12
8 3/8" 19 1/16"
12'
NONE
—
—
MLD544-12
11 1/8" 13 1/2"
12'
NONE
—
—
9 1/4"
16'
NONE
—
—
8 15/16" 19 1/4"
16'
NONE
—
—
Part Number
Fascia
Fascia
Fascia
Fascia
Fascia
MLD545-16
10"
Fascia
MLD546-16
Fascia
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
34 ML
MOULDINGS
Section/Catalog
DIMENSIONS
Projection
Height
Length
Design
Repeat
Dentil Block
Moulding Match
MLD547-16
5 3/8"
8 1/8"
16'
NONE
—
—
MLD548-16
3 1/8"
7 1/2"
16'
NONE
—
—
MLD549-16
4"
10"
16'
NONE
—
—
MLD550-16
2 3/8"
4 7/8"
16'
NONE
—
—
MLD551-16
3 7/8"
9 1/8"
16'
NONE
—
—
MLD552-12
2 1/8"
3 7/16"
12'
NONE
—
—
MLD555-12
5 5/8"
10 3/8
12'
NONE
—
—
Part Number
Fascia
Fascia
Fascia
Fascia
Fascia
Classic Crown
Fascia
Crown Fascia
35 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Section/Catalog
DIMENSIONS
Part Number
MLD556-16
Projection
Height
Length
Design
Repeat
Dentil Block
Moulding Match
10"
15"
16'
NONE
—
—
Moulding
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside Corner
MLD560-8
5 7/8"
9 1/8"
8'
5 7/16"
MOC560
(Page 60 ML)
(Page 60 ML)
MLD561-8
1 1/2"
3 1/4"
8'
1 9/16"
MLD561-12
1 1/2"
3 1/4"
12'
MLD562-8
2 3/8"
2 15/16"
8' 5"
MLD563-12
2 1/16"
2 1/4"
Part Number
Inside Corner
Divider Block
MIC560
MDB560
—
—
—
1 9/16"
—
—
—
6 1/8"
—
—
—
12' 3" 1 11/16"
—
—
—
Egg and Dart
(Page 60 ML)
Egg and Dart
Egg and Dart
Egg and Dart
Egg and Dart
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
36 ML
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside Corner
Inside Corner
Divider Block
MLD564-16
2 5/8"
5 3/8"
16'
2 13/16"
—
—
—
MLD565-16
2 1/4"
3 1/2"
16'
1"
—
—
—
Part Number
Egg and Dart
Egg and Dart
Moulding
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
5 3/4"
7 17/32"
12'
NONE
—
—
—
—
MLD570-12
5 1/2"
6 7/8"
12'
NONE
—
—
—
MLD571-12
4"
Part Number
MLD569-12
Crown Fascia
EV570
See E-Vents
Section/Catalog
(Page 5 EV)
Crown Fascia
4 3/16"
12'
Egg and Dart
1 1/4"
MOC571
(Page 61 ML)
MIC571
(Page 61 ML)
MDB571
(Page 61 ML)
—
37 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
MLD572-16
3 1/4"
4"
16'
NONE
—
—
—
—
MLD573-16
4 1/2"
4 1/4"
16'
NONE
—
—
—
—
MLD574-16
7"
16 1/2"
16'
NONE
—
—
—
—
MLD580-12
7 1/8"
12 1/8"
12'
NONE
—
—
—
MLD581-12
5"
9 15/16"
12'
NONE
—
—
—
—
MLD582-12
7 7/8"
7 7/8"
12'
NONE
—
—
—
—
MLD583-16
8"
8"
16'
NONE
—
—
—
—
Part Number
Crown
Crown
Crown Fascia
EV580
See E-Vents
Section/Catalog
(Page 7 EV)
Crown Fascia
Crown Fascia
Crown
Cove
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
38 ML
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
MLD584-16
4 3/4"
4 3/4"
16'
NONE
—
—
—
—
MLD585-12
10 1/2"
17"
12'
NONE
—
—
—
—
MLD586-16
7"
16 1/2"
16'
NONE
—
—
—
—
MLD587-16
2 3/8"
5 3/4"
16'
NONE
—
—
—
—
MLD588-16
9 1/4"
11"
16'
NONE
—
—
—
—
MLD589-16
4 1/2"
6 1/4"
16'
NONE
—
—
—
—
MLD590-16
6"
6"
16'
NONE
—
—
—
—
Part Number
Cove
Cove
Cove
Cove
39 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
MLD591-16
10 1/4"
9 7/16"
16'
NONE
—
—
—
—
MLD592-16
3 7/8"
3 7/8"
16'
NONE
—
—
—
—
MLD593-16
2 1/2"
2 1/2"
16'
NONE
—
—
—
—
MLD594-12
10 1/4"
17"
12'
NONE
—
—
—
—
/4"
4 5/16"
8'
5 5/8"
—
—
—
—
/4"
4 5/16"
10'
5 5/8"
—
—
—
—
1 5/16"
1 1/2"
12'
NONE
—
—
—
—
Part Number
Cove
Cove
Cove
Cove
MLD600-8
3
MLD600-10
3
Florentine
Florentine
MLD601-12
Ogee
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
40 ML
MOULDINGS
DIMENSIONS
Part Number
Projection
MLD602-8
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
/16"
8'
NONE
—
—
—
—
/2"
8'
NONE
—
—
—
—
Height
/16"
13
/2"
1
13
Ogee
Crosshead Trim Strip.
MLD603-8
1
Quarter Round
MLD604-12
1 5/16"
6 3/4"
11' 4"
13 3/8"
—
—
—
—
MLD605-12
1 3/4"
3 1/2"
12'
NONE
—
—
—
—
MLD606-12
5 1/4"
5 1/4"
12'
NONE
—
—
—
—
MLD607-8
2 1/4"
2 1/4"
8'
NONE
—
—
—
—
MLD608-12
4 11/16"
5 7/16"
12'
2"
—
—
—
—
Ribbon and Bow
Fascia
Half Round
Beaded Cove
Corner Strip
Decorative Cove
41 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
/8"
2 1/16"
12'
1 7/8"
—
—
—
—
MLD610-8
1 1/2"
2 3/8"
8'
NONE
—
—
—
—
MLD611-12
1 1/8"
2 1/4"
12'
NONE
—
—
—
—
/4"
1 3/8"
12'
NONE
—
—
—
—
MLD613-12
2 3/8"
2 3/4"
12'
NONE
—
—
—
—
MLD614-16
1 5/8"
5 1/2"
16'
NONE
—
—
—
—
Part Number
Projection
MLD609-12
7
Chair Rail
Chair Rail
Chair Rail
MLD612-12
3
Chair Rail
Cornice
Chair Rail
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
42 ML
MOULDINGS
Moulding
DIMENSIONS
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
/8"
6"
8'
9 1/2"
—
—
—
—
/8"
6"
8'
9 1/2"
—
—
—
—
MLD616-12
1 5/8"
3 1/4"
12'
4"
—
—
—
—
MLD617-12
2"
14"
12' 7"
30"
—
—
—
—
/16"
16'
NONE
—
—
—
—
Part Number
Projection
MLD615-8
7
MLD615-8S
7
Frieze Board
Frieze Board
Chair Rail
Triglyph
MLD618-16
15
1 9/16"
MLD619-12
5 1/8"
5 3/8" 11' 7 1/2" 17 3/16"
MLD620-12
1 1/2"
5 3/8"
12'
/16"
2"
16'
Base Cap
(Page 62 ML)
(Page 62 ML)
MIC619
MDB619
—
NONE
—
—
—
—
NONE
—
—
—
—
Cove
MOC619
(Page 62 ML)
Silhouette
MLD621-16
9
Shingle
43 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Part Number
MLD622-4
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
2 13/16"
4"
4'
NONE
—
—
—
—
/16"
8'
NONE
—
—
—
—
Chair Rail
MLD623-8
/16"
5
11
Rope
MLD624-10
1 3/4"
1 3/4"
10'
NONE
—
—
—
—
MLD625-16
3"
4"
16'
NONE
—
—
—
—
MLD626-8
1 1/32"
1 3/16"
8'
NONE
—
—
—
—
MLD627-12
1 5/8"
2 1/8"
12'
NONE
—
—
—
—
MLD627-16
1 5/8"
2 1/8"
16'
NONE
—
—
—
—
Step
Chair Rail
Chair Rail
Chair Rail
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
44 ML
MOULDINGS
DIMENSIONS
Part Number
Projection
MLD628-8
/4"
3
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
/4"
8'
NONE
—
—
—
—
Height
3
Chair Rail
MLD629-10
2 1/4"
2 1/4"
10'
NONE
—
—
—
—
MLD630-10
6"
9"
10'
NONE
—
—
—
—
Scalloped
Ships in two pieces.
MLD631-16
7
/8"
3 1/8"
16'
NONE
—
—
—
—
MLD632-16
1"
4 1/2"
16'
3 1/2"
—
—
—
—
MLD633-8
3
/4"
8'
NONE
—
—
—
—
Chair Rail/Surround
Moulding
Deco
/4"
3
Ogee
45 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside
Corner
Divider
Block
Other Match
MLD634-16
1 3/8"
1 7/8"
16'
NONE
—
—
—
—
MLD635-12
6 1/8"
9"
12'
NONE
—
—
—
—
MLD636-16
1 9/16"
1 3/4"
16'
NONE
—
—
—
—
/16"
1 1/2"
16'
NONE
—
—
—
—
/4"
1 11/16"
16'
NONE
—
—
—
—
MLD639-16
1 7/8"
6"
16'
NONE
—
—
—
—
MLD640-8
1"
5 13/16"
8'
6"
—
—
—
Scalloped Bracket
BKT12X12, BKT14X15,
BKT17X10, BKT26X8
Part Number
Ogee
Cove
Inside Corner
MLD637-16
9
MLD638-16
3
Flat Astrigal
Stop
Surround
Scalloped
Section/Catalog
(Pages 6 DM, 8 DM - 9 DM, 11 DM)
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
46 ML
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
MLD641-16
3 3/4"
4 3/8"
16'
NONE
—
—
—
—
MLD642-12
12"
11 3/4"
12'
NONE
—
—
—
—
MLD643-12
1 3/4"
8 3/4"
12'
NONE
—
—
—
—
MLD644-16
3"
9 3/4"
16'
NONE
—
—
—
—
MLD645-16
1 15/16"
2 7/16"
16'
3 3/8"
—
—
—
—
MLD647-16
1 3/4"
8"
16'
12"
—
—
—
—
MLD648-16
1 1/2"
1 1/16"
16'
NONE
—
—
—
—
Part Number
Deco
Inside Corner
47 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Part Number
MLD649-16
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
1 9/16"
2 1/16"
16'
NONE
—
—
—
—
Bed Mouldings
MLD650-8
3
/4"
3 3/8"
8'
NONE
—
—
—
—
MLD651-16
3"
5 1/2"
16'
4 1/8"
—
—
—
—
MLD652-16
1"
6 1/4"
16'
7"
—
—
—
—
MLD653-10
4 5/8"
12 3/8"
10'
NONE
—
—
—
—
MLD700-16
1 1/8"
5 1/2"
16'
NONE
—
—
—
—
MLD701-12
1 7/8"
1 1/4"
12'
NONE
—
—
—
—
Deco
Deco
Leaf & Berry
Surround
Corner
Window Sill
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
48 ML
MOULDINGS
DIMENSIONS
Part Number
Height
Length
Design
Repeat
Outside
Corner
Inside
Corner
Divider
Block
/2"
2 1/2"
10'
NONE
—
—
—
/2"
2 7/8"
10'
NONE
—
—
—
2 1/2"
1 1/8"
12'
NONE
—
—
—
—
/4"
7 1/2"
16'
NONE
—
—
—
—
/8"
5 1/4"
16'
NONE
—
—
—
Plinth
Block/
Rosette PB6X6
Projection
MLD702-10
1
MLD703-10
1
Corner Strip
Other Match
NOTE:
MLD702 and MLD703
are to be used together
to make an adjustable
corner capable of a
maximum 45.º Ideal
to trim bay or bow
windows.
Corner Strip
MLD704-12
Window Sill
MLD705-16
3
MLD706-16
5
Flat Trim w/Cove
Base Trim
(Page 62 ML)
MLD707-8
/4"
3
3"
8'
NONE
—
—
—
Flat Trim w/Bevel
Plinth
Block/
Rosette PB3X3
PB4X4
(Page 62 ML)
MLD707-12
3
MLD707-16
3
/4"
3"
12'
NONE
—
—
—
/4"
3"
16'
NONE
—
—
—
Flat Trim w/Bevel
Flat Trim w/Bevel
49 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
MLD708-12
1 1/2"
12"
12'
NONE
—
—
—
—
MLD708-16
1 1/2"
12"
16'
NONE
—
—
—
—
MLD709-16
1 5/8"
1 1/16"
16'
NONE
—
—
—
—
MLD710-10
3 1/2"
1 1/2"
10'
NONE
—
—
—
—
/2"
2 7/8"
10'
NONE
—
—
—
—
/2"
4 7/8"
10'
NONE
—
—
—
—
/2"
7 1/2"
10'
NONE
—
—
—
—
Part Number
Flat Trim w/Bevel
Flat Trim w/Bevel
Drip Cap
Sill
MLD711-10
1
MLD712-10
1
MLD713-10
1
Corner Strip
Corner Strip
Corner Strip
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
50 ML
MOULDINGS
DIMENSIONS
Part Number
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
/2"
7 1/2"
10'
NONE
—
—
—
—
Projection
MLD714-10
1
MLD714-12
1
/2"
7 1/2"
12'
NONE
—
—
—
—
MLD715-16
1"
4"
16'
NONE
—
—
—
—
MLD718-12
1"
7 3/4"
12'
NONE
—
—
—
—
MLD720-9
1"
5"
9'
NONE
—
—
—
—
MLD725-10
2 1/4"
2 1/8"
10'
NONE
—
—
—
—
MLD726-12
1 5/8"
4"
12'
NONE
—
—
—
—
Corner Strip
Corner Strip
Beaded Board
Sill
Door/Window
51 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
DIMENSIONS
Projection
Height
Length
Design
Repeat
Outside
Corner
Inside Corner
Divider Block
Other Match
MLD728-16
2"
24"
16'
NONE
—
—
—
—
MLD730-8
7
/8"
1"
8'
NONE
—
—
—
—
MLD732-12
4 3/4"
7 1/4"
12'
5 3/8"
—
—
—
—
MLD733-8
2 3/8"
2 3/8"
8'
1 1/2"
—
—
—
—
MLD734-12
14 3/8" 14 3/8"
12'
NONE
—
—
—
—
16'
NONE
—
—
—
—
Part Number
Ogee
Scallop
Cove
MLD735-16
1"
7 1/2"
Beaded Board
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
52 ML
MOULDINGS
Miterless Moulding System
MLD 400 - Mitered Corner/Divider Block System
Part Number
Moulding Match
(Page 20 ML)
MOC400
MLD400
MIC400
MLD400
MDB400
MLD400
Outside Corner
Inside Corner
Divider Block
53 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
MLD 400S - Woodgrain/Stainable Mitered Corner/Divider Block System
All Woodgrain/Stainable Mouldings are moulded with natural oak texture and color, ready to stain or paint.
Moulding Match
(Page 20 ML)
Part Number
MOC400S
MLD400S
MIC400S
MLD400S
MDB400S
MLD400S
Outside Corner
Inside Corner
Divider Block
Part Number
Moulding Match
(Page 21 ML)
MOC405
MLD405
MIC405
MLD405
MDB405
MLD405
Outside Corner
Inside Corner
Divider Block
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
54 ML
MOULDINGS
Part Number
Moulding Match
(Page 22 ML)
MOC423
MLD423
MIC423
MLD423
MDB423
MLD423
Outside Corner
Inside Corner
Divider Block
Part Number
Moulding Match
(Page 23 ML)
MOC425
MLD425
MIC425
MLD425
MDB425
MLD425
Outside Corner
Inside Corner
Divider Block
55 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
MLD 431/452 - Mitered Corner/Divider Block System
Moulding Match
(Pages 23 ML - 26 ML)
Part Number
MOC1
MLD431
MLD452
MIC1
MLD431
MLD452
MDB1
MLD431
MLD452
Outside Corner
Inside Corner
Divider Block
MLD 431S/452S - Woodgrain/Stainable Mitered Corner/Divider Block System
Moulding Match
(Pages 23 ML - 26 ML)
Part Number
MOC1S
MLD431S
MLD452S
MIC1S
MLD431S
MLD452S
MDB1S
MLD431S
MLD452S
Outside Corner
Inside Corner
Divider Block
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
56 ML
MOULDINGS
Part Number
Moulding Match
(Page 24 ML)
MOC432
MLD432
MIC432
MLD432
MDB432
MLD432
Outside Corner
Inside Corner
Divider Block
MLD 432S - Woodgrain/Stainable Mitered Corner/Divider Block System
Moulding Match
(Page 24 ML)
Part Number
MOC432S
MLD432S
MIC432S
MLD432S
MDB432S
MLD432S
Outside Corner
Inside Corner
Divider Block
57 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
MLD 454 - Outside and Inside Corners
Part Number
Moulding Match
(Page 26 ML)
MOC454
MLD454
MIC454
MLD454
Outside Corner
Inside Corner
Part Number
Moulding Match
(Page 26 ML)
MOC455
MLD455
MIC455
MLD455
Outside Corner
Inside Corner
Part Number
Moulding Match
(Page 27 ML)
MOC457
MLD457
MIC457
MLD457
Outside Corner
Inside Corner
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
58 ML
MOULDINGS
Part Number
Moulding Match
(Page 28 ML)
MOC490
MLD490
MIC490
MLD490
MDB490
MLD490
Outside Corner
Inside Corner
Divider Block
Part Number
Moulding Match
(Page 28 ML)
MOC491
MLD491
MIC491
MLD491
MDB491
MLD491
Outside Corner
Inside Corner
Divider Block
59 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Part Number
Moulding Match
(Page 29 ML)
MOC493
MLD493
MIC493
MLD493
MDB493
MLD493
Outside Corner
Inside Corner
Divider Block
Part Number
Moulding Match
(Page 36 ML)
MOC560
MLD560
MIC560
MLD560
MDB560
MLD560
Outside Corner
Inside Corner
Divider Block
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
60 ML
MOULDINGS
Part Number
Moulding Match
(Page 37 ML)
MOC571
MLD571
MIC571
MLD571
MDB571
MLD571
Outside Corner
Inside Corner
Divider Block
Part Number
Moulding Match
(Page 41 ML)
MOC608
MLD608
MIC608
MLD608
MDB608
MLD608
Outside Corner
Inside Corner
Divider Block
61 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Part Number
Moulding Match
(Page 43 ML)
MOC619
MLD619
MIC619
MLD619
MDB619
MLD619
Outside Corner
Inside Corner
Divider Block
Plinth Block/Rosette
Part Number
Width
PB3X3
3 5/8"
PB4X4
Thickness
Moulding Match
/8"
FLT103 (Page 3 ML)
MLD205 (Page 6 ML)
MLD239 (Page 11 ML)
MLD707 (Page 49 ML)
3 5/8"
1 1/8"
FLT103 (Page 3 ML)
MLD205 (Page 6 ML)
MLD230 (Page 9 ML)
MLD707 (Page 49 ML)
PB5X5
5 1/4"
1"
FLT109 (Page 3 ML)
MLD210 (Page 6 ML)
MLD211 (Page 7 ML)
PB6X6
5 5/8"
1 1/8"
FLT159 (Page 3 ML)
MLD210 (Page 6 ML)
MLD211 (Page 7 ML)
MLD242 (Page 11 ML)
MLD706 (Page 49 ML)
7
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
62 ML
MOULDINGS
Plinth Block/Rosette (continued)
Part Number
Width
Thickness
Moulding Match
PB215
3 5/8"
1 7/8"
MLD215, MLD237
(Page 7 ML, 11 ML)
PB220
5 1/2"
2"
MLD220, MLD236
(Page 7 ML, 10 ML)
Keystone
Part Number
KWM180M
A
B
C
D
E
F
Moulding Match
2 3/4"
3 1/8"
2"
2 7/16"
2"
1"
MLDWM180
(Page 5 ML)
K4TF
4 1/4"
4 1/2"
3"
2 1/4"
3 1/2"
/2"
1
FLT152
(Page 3 ML)
KP4TF
4 1/4"
4 1/2"
3"
2 1/4"
3 1/2"
/2"
1
FLT152
(Page 3 ML)
K4TM
4 1/4"
4 1/2"
3"
2 1/4"
3 1/2"
/4"
3
MLD215
(Page 7 ML)
KP4TM
4 1/4"
4 1/2"
3"
2 3/4"
3 1/2"
1"
MLD215
(Page 7 ML)
K6TF
6"
7"
4"
2 3/8"
5 1/2"
/8"
5
FLT159
(Page 3 ML)
63 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
Keystone (continued)
Part Number
A
B
C
D
E
KP6TF
6"
7"
4"
2 3/8"
5 1/2"
F
/8"
5
Moulding Match
FLT159
(Page 3 ML)
K6TM
6"
7"
4"
2 3/8"
5 1/2"
/8"
7
MLD220
(Page 7 ML)
KP6TM
6"
7"
4"
2 1/2"
5 1/2"
1"
MLD220
(Page 7 ML)
K8TF
7"
8 7/8"
5"
2 1/2"
7 1/2"
/4"
3
FLT162
(Page 3 ML)
K10TF
11"
11 1/2"
5 3/4"
2"
9 1/2"
1"
FLT170
(Page 3 ML)
K221M
6"
8 3/8"
3 19/32"
2 3/8"
7"
/4"
3
MLD221
(Page 8 ML)
K226M
8 1/2"
6 1/2"
6"
2 3/8"
5 1/2"
/4"
3
MLD226
(Page 9 ML)
K227M
8 1/2"
10"
6"
2 3/8"
9"
/8"
7
MLD227
(Page 9 ML)
K505M
8 7/8"
13 7/8"
4 1/2"
5"
13"
1"
MLD505
(Page 30 ML)
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
64 ML
MOULDINGS
MOULDINGS
Recommended Table and Blade Angles for Mitering 90˚ Corners
Moulding Part Number
Table Miter Degree
Saw Blade Bevel Degree
Rock Moulding Towards Fence*
Capable of cutting on the Dewalt 12" Sliding Compound Miter Saw (#DW708)
MLD400
41
24
YES
YES
MLD404
24
38
NO
YES
MLD405
25.5
38
NO
YES
MLD406
25
39
NO
YES
MLD410
17
42
NO
YES
MLD411
26
38
NO
YES
MLD420
20
41
NO
NO (use table saw)
MLD421
28.5
36
NO
NO (use table saw)
MLD422
39
24
YES
YES
MLD423
23
39
NO
YES
MLD425
18
42
NO
YES
MLD430
19
42
NO
NO (use table saw)
MLD431
32
34
NO
YES
MLD432
37
27
YES
YES
MLD440
41.5
20
NO
YES
MLD452
29
36
NO
YES
MLD453
29.5
36
NO
YES
MLD456
28
36
NO
YES
MLD460
32
33
NO
YES
MLD470
41
20
NO
NO (use table saw)
MLD471
39.75
23
NO
YES
MLD480
42.5
16
NO
YES
MLD490
36.5
28
NO
YES
MLD491
37
28
YES
YES
MLD492
32
34
YES
YES
MLD493
31.6
34
NO
YES
MLD494
28
36
NO
YES
MLD510
24
38
NO
YES
65 ML
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
MOULDINGS
Recommended Table and Blade Angles for Mitering 90˚ Corners (continued)
Moulding Part Number
Table Miter Degree
Saw Blade Bevel Degree
Rock Moulding Towards Fence*
Capable of cutting on the Dewalt 12" Sliding Compound Miter Saw (#DW708)
MLD552
25.5
38
NO
YES
MLD555
25
39
NO
YES
MLD560
31
34
YES
YES
MLD563
36
28
YES
YES
MLD570
31
35
NO
YES
MLD571
39
25
YES
YES
MLD580
27.5
37
NO
NO (use table saw)
MLD606
35
30
NO
YES
MLD608
33
32
NO
YES
MLD619
34
31
NO
YES
MLD630
33
32
NO
YES
IMPORTANT: Since the
face side of the moulding
is to a more exacting
tolerance, all crown
mouldings should be cut
with the face down and
the bottom edge of the
crown moulding against
the fence on the saw.
For corners that vary from 90,°
we recommend the use of the
Bosch Digital Protractor (Model #
DWM40L) to easily find miter and
Place moulding face side down.
bevel angles for crown mouldings.
Place bottom edge of the moulding
towards the fence.
*“YES” means to rock the moulding
towards the fence pivoting on the
design (as shown on MLD422) and
“NO” means let the moulding lay flat
on the table.
www.fypon.com
Fax 800.446.9373 • 419.445.4440 U.S. and Canada
66 ML
MOULDINGS
FEATURES AND BENEFITS
■ Hundreds of uniquely detailed designs to match any décor.
■ Authentic architectural profiles can be used for inside or
outside applications.
■ Many profiles are combinations of moulded pieces that save time
and labor.
■ Corner inside and outside with Moulding Blocks, Plinth Blocks or
Rosettes to make installation hassle free.
■ Miterless Crown Moulding Systems are also available.
Blackstock Lumber Co., Inc.
1039 Elliott Avenue West • Seattle, WA 98119
Phone (206) 284-1313 • Fax (206) 281-0062
www.blackstocklumber.com
For complete information on all Fypon product categories – Louvers, E-Vents, Window and Door Trim,
Mouldings, Decorative Millwork, Balustrade Systems and Columns – consult our comprehensive, full-line
catalog or visit www.fypon.com.
960 West Barre Road
Archbold, OH 43502
Phone: 419.445.0116
800.446.3040 U.S. and Canada
Fax: 419.445.4440
800.446.9373 U.S. and Canada
www.fypon.com • email: [email protected]
Fypon® is a registered trademark of Fypon, Ltd. PL Premium is a registered trademark of OSI Sealants, Inc.
All rights reserved. Changes to the products may have been made since publication. Consult your sales
representative prior to purchasing. ©2005 Fypon, Ltd. Printed in U.S.A.
Publication
No. 087405
www.fypon.com
105 800.446.3040 • 419.445.0116 U.S. and Canada
Phone
Fax 800.446.9373 • 419.445.4440 U.S. and Canada

Fypon Mouldings Catalog - Blackstock Lumber Co., Inc.

Transcription

Similar documents

Mouldings - Hamilton Building Supply

Boulanger Wainscot

Mouldings

Mouldings - TMP Group

Mouldings - Fibertech

LOUVERS, CROSSHEADS, MOULDING, DECORATIVE MILLWORK

Mesa Precast Catalog

5" Balustrade System

Fypon Decorative Millwork Catalog

ACCESSORIES - Canyon Creek Cabinet Company

Masonite Craftsman Style Doors with Clear (Low`E