Brass SAE 45° Flared Fittings

Transcription

Advantages
This economical fitting resists mechanical pullout. Can be assembled and disassembled repeatedly.
Manufactured from CA 360, CA 345 or CA 377 brass.
Specifications
Assembly Instructions
Listed with Underwriter’s Laboratories for flammable liquid,
marine, refrigeration and gas applications. Meets functional
requirements of SAE J512 and J513, ASA, ASME and MS
(Military Standards).
1. Cut tubing squarely and clean tube end thoroughly to
remove burrs.
2. Place nut onto tube. Place threaded end of nut toward end
of tube.
3. Flare tube end with flaring tool to provide 45° flare.
4. Clamp tube flare between nut and nose of fitting body by
screwing nut on finger-tight. Tighten with a wrench an
additional 1/4 turn for a metal-to-metal seal.
Applications
Use with copper, brass, aluminum and welded steel hydraulic
tubing that can be flared. Manufactured especially for hard-to-hold
liquids and gases.
FITTINGS, HOSE & TUBING
Working Pressure Ranges
Temperature and type of tubing used are important factors.
However, the following table is a good guide for proper selection.
Temperature 73°F with copper tubing
PSI
TUBE O.D. (IN.)
2800
1900
1400
1200
1000
750
650
550
450
TUBE WALL (IN.)
1/8
.030
3/16
.030
1/4
.030
5/16
.032
3/8
.032
1/2
.032
5/8
.035
3/4
.035
7/8
.035
Flare fittings are easy to disassemble and may be reassembled
repeatedly, for a leak-proof connection.
Nomenclature
Part numbers are constructed from symbols that identify the style
and size of the fitting. The first series of numbers and letters iden
tifies the style and type fitting. The second series of numbers
describes the size.
EXAMPLE:
1
Forging (1)
Extrusion (2)
Flare to External Pipe, 90° Elbow
Flare Fitting
3/8" (6/16) Tube O.D. Size
1/4" (4/16) Pipe Size
F
PART # 00465
Available in
an Assortment
Found on Page 660
PART # 00465KP
PART # 00532
Short nut may be used when vibration is minimal. The long nut
offers additional vibration capacity.
Found on Page 660
PART # 00533
Found on Page 660
PART # 00538
Found on Page 661
680
1 800 458-4018 www.uzengprod.com
-4
Tube sizes are determined by the number of sixteenths of an inch in
the tube O.D.
Found on Page 661
Vibration
-6
Sizes
Temperature Ranges
From -65° to +250°F.
49
Refrigerant Drum Adapters
Ref. SAE 010165
UZ
PART
NO.
PK.
35000
35001
5
1F-4-8
5
1F-4-12
PARKER
PART
NO.
TUBE
O.D.
PIPE
THREAD
C
HEX
1/4
1/2
1-1/8
1.12
.187
1/4
3/4
1-1/4
1.12
.187
FLOW
DIA. D
L
Copper Flare Gaskets
UZ
PART
NO.
35002
35003
35004
35005
35006
35007
35008
PARKER
PART
NO.
TUBE
SIZE
5
2GF-3
3/16
.32
5
2GF-4
1/4
.37
5
2GF-5
5/16
.43
5
2GF-6
3/8
.56
PK.
A
5
2GF-8
1/2
.67
5
2GF-10
5/8
.78
5
2GF-12
3/4
.97
PARKER
PART
NO.
TUBE
SIZE
A
5
3GF-3
3/16
.32
5
3GF-4
1/4
.37
5
3GF-5
5/16
.43
5
3GF-6
3/8
.56
Seal Bonnets
UZ
PART
NO.
5
3GF-8
1/2
.67
5
3GF-10
5/8
.78
5
3GF-12
3/4
.97
35009
35010
35011
35012
35013
35014
35015
PK.
Long Forged Nuts
Ref. SAE 010167
UZ
PART
NO.
35016
35017
35018
35019
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
D
L
7/16-20
5/8
.257
.94
5
14FL-4
1/4
5
14FL-6
3/8
5/8-18
13/16
.382
1.06
2
14FL-8
1/2
3/4-16
15/16
.507
1.19
2
14FL-10
5/8
7/8-14
1-1/16
.632
1.44
C
HEX
D
L
Short and Extra Short Forged Nuts
UZ
PART
NO.
35022
32000
35025
35027
32001
32002
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
5
14FSX-4
1/4
7/16-20
5/8
.257
.63
5
14FSX-5
5/16
1/2-20
11/16
.320
.67
5
14FSX-6
3/8
5/8-18
13/16
.382
.74
2
14FSX-8
1/2
3/4-16
15/16
.508
.86
2
14FSX-10
5/8
7/8-14
1-1/16
.632
.97
2
14FSX-12
3/4
1-1/16-14
1-5/16
.758
1.17
681
Short Forged Reducing Nuts
UZ
PART
NO.
35030
35031
35032
PK.
PARKER
PART
NO.
TUBE
SIZE
5
14FS-6-4
5
14FS-8-6
2
14FS-10-8
STRAIGHT
THREAD
C
HEX
D
L
3/8 x 1/4
5/8-18
13/16
.257
.74
1/2 x 3/8
3/4-16
15/16
.382
.86
5/8 x 1/2
7/8-14
1-1/16
.507
.99
Swivel Nut Valve Connectors
UZ
PART
NO.
35033
35034
35035
35036
PK.
PARKER
PART
NO.
5
5
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
14FSV-4
1/4
7/16-20
5/8
1.31
14FSV-6
3/8
5/8-18
13/16
1.50
2
14FSV-8
1/2
3/4-16
15/16
1.75
2
14FSV-10
5/8
7/8-14
1-1/16
2.00
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
D
5
41FL-2
1/8
5/16-24
3/8
.133
5
41FL-3
3/16
3/8-24
7/16
.195
.81
5
41FL-4
1/4
7/16-20
9/16
.257
.94
5
41FL-5
5/16
1/2-20
5/8
.320
1.12
5
41FL-6
3/8
5/8-18
3/4
.382
1.31
2
41FL-8
1/2
3/4-16
7/8
.507
1.62
2
41FL-10
5/8
7/8-14
1-1/16
.632
1.88
2
41FL-12
3/4
1-1/16-14
1-1/4
.758
2.19
L
L
Long Nuts
Ref. SAE 010111
UZ
PART
NO.
31000UZ
31001
31002
31003
31004
31005
31006
31007
L
.75
Short and Extra Short Nuts
Ref. SAE 010110
UZ
PART
NO.
31008
31009
31010
31011
31012
35037
31014
35038
31015
35039
31016
35040
682
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
D
5
41FS-2
1/8
5/16-24
3/8
.132
.50
5
41FS-3
3/16
3/8-24
7/16
.195
.62
5
41FS-4
1/4
7/16-20
9/16
.257
.75
5
41FS-5
5/16
1/2-20
5/8
.320
.88
5
41FS-6
3/8
5/8-18
3/4
.382
1.00
5
41FX-6
3/8
5/8-18
3/4
.382
.91
2
41FS-8
1/2
3/4-16
7/8
.507
1.12
2
41FX-8
1/2
3/4-16
7/8
.507
1.00
2
41FS-10
5/8
7/8-14
1-1/16
.632
1.31
2
41FX-10
5/8
7/8-14
1-1/16
.632
1.06
2
41FS-12
3/4
1-1/16-14
1-1/4
.757
1.50
2
41FS-14
7/8
1-1/4-12
1-1/2
.882
1.62
Reducing Nuts
UZ
PART
NO.
35041
35042
35043
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
D
5
41FS-6-4
3/8 to 1/4
5/8-18
3/4
.257
2
41FS-8-6
1/2 to 3/8
3/4-16
7/8
.382
1.09
2
41FS-10-8
5/8 to 1/2
7/8-14
1-1/16
.507
1.25
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
D
5
42F-2
1/8
5/16-24
5/16
.90
.079
5
42F-3
3/16
3/8-24
3/8
1.04
.125
5
42F-4
1/4
7/16-20
7/16
1.17
.188
5
42F-5
5/16
1/2-20
1/2
1.32
.219
5
42F-6
3/8
5/8-18
5/8
1.48
.281
2
42F-8
1/2
3/4-16
3/4
1.79
.408
2
42F-10
5/8
7/8-14
7/8
2.10
.502
2
42F-12*
3/4
1-1/16-14
1-1/16
2.42
.626
2
42F-14*
7/8
1-1/4-12
1-1/4
2.72
.752
L
1.00
Unions
Ref. SAE 010101
UZ
PART
NO.
31017
31018
31019
31020
31021
31022
31023
31024
35044
*Thread Protectors
Union Reducers
UZ
PART
NO.
35045
35046
35047
35048
35049
35050
PK.
PARKER
PART
NO.
1
TUBE
SIZE
2
TUBE
SIZE
1
STRAIGHT
THREAD
2
STRAIGHT
THREAD
2
42F-6-4
1/4
3/8
7/16-20
5/8-18
5/8
1.36
.281
.188
2
42F-6-5
5/16
3/8
1/2-20
5/8-18
5/8
1.42
.281
.219
2
42F-8-4
1/4
1/2
7/16-20
3/4-16
3/4
1.54
.408
.188
2
42F-8-6
3/8
1/2
5/8-18
3/4-16
3/4
1.67
.408
.281
2
42F-10-6
3/8
5/8
5/8-18
7/8-14
7/8
1.86
.502
.281
2
42F-10-8
1/2
5/8
3/4-16
7/8-14
7/8
1.98
.502
.408
C
HEX
L
FLOW
DIA. D1
FLOW
DIA. D2
683
Female Connectors
Ref. SAE 010103
UZ
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
C
HEX
L
5
46F-2-2
1/8
1/8
5/16-24
9/16
.91
.078
5
46F-3-2
3/16
1/8
3/8-24
9/16
.95
.125
5
46F-4-2
1/4
1/8
7/16-20
9/16
1.01
.188
5
46F-4-4
1/4
1/4
7/16-20
11/16
1.23
.188
5
46F-4-6
1/4
3/8
7/16-20
13/16
1.26
.188
5
46F-5-2
5/16
1/8
1/2-20
9/16
1.05
.220
5
46F-5-4
5/16
1/4
1/2-20
11/16
1.26
.220
5
46F-6-2
3/8
1/8
5/8-18
5/8
1.10
.282
5
46F-6-4
3/8
1/4
5/8-18
11/16
1.29
.282
5
46F-6-6
3/8
3/8
5/8-18
13/16
1.36
.282
5
46F-6-8
3/8
1/2
5/8-18
1
1.60
.282
2
46F-8-4
1/2
1/4
3/4-16
3/4
1.39
.408
2
46F-8-6
1/2
3/8
3/4-16
13/16
1.48
.408
2
46F-8-8
1/2
1/2
3/4-16
1
1.73
.408
2
46F-8-12
1/2
3/4
3/4-16
1-1/4
1.79
.408
2
46F-10-6
5/8
3/8
7/8-14
7/8
1.57
.502
2
46F-10-8
5/8
1/2
7/8-14
1
1.80
.502
2
46F-10-12
5/8
3/4
7/8-14
1-1/4
1.89
.502
31025
31026
31027
31028
31029
31030
31031
31032
31033
31034
31035
31036
31037
31038
31039
31040
31041
31042
PK.
PARKER
PART
NO.
684
FLOW
DIA. D
Male Connectors
Ref. SAE 010102
UZ
PART
NO.
PK.
PARKER
PART
NO.
5
48F-2-2
5
48F-3-2
5
48F-3-4
3/16
5
48F-4-2
1/4
5
48F-4-4
5
48F-4-6
5
48F-4-8
5
48F-5-2
5
48F-5-4
5
48F-5-6
5
5
STRAIGHT
THREAD
C
HEX
1/8
1/8
5/16-24
7/16
.91
.078
3/16
1/8
3/8-24
7/16
.98
.125
1/4
3/8-24
9/16
1.17
.125
1/8
7/16-20
7/16
1.04
.189
1/4
1/4
7/16-20
9/16
1.23
.189
1/4
3/8
7/16-20
11/16
1.29
.189
1/4
1/2
7/16-20
7/8
1.54
.189
5/16
1/8
1/2-20
1/2
1.14
.220
5/16
1/4
1/2-20
9/16
1.32
.220
5/16
3/8
1/2-20
11/16
1.36
.220
48F-6-2
3/8
1/8
5/8-18
5/8
1.23
.220
48F-6-4
3/8
1/4
5/8-18
5/8
1.42
.282
5
48F-6-6
3/8
3/8
5/8-18
11/16
1.42
.282
5
48F-6-8
3/8
1/2
5/8-18
7/8
1.67
.282
2
48F-6-12
3/8
3/4
5/8-18
1-1/16
1.79
.282
2
48F-8-4
1/2
1/4
3/4-16
3/4
1.60
.408
2
48F-8-6
1/2
3/8
3/4-16
3/4
1.60
.408
2
48F-8-8
1/2
1/2
3/4-16
7/8
1.79
.408
2
48F-8-12
1/2
3/4
3/4-16
1-1/16
1.92
.408
2
48F-10-4
5/8
1/4
7/8-14
7/8
1.79
.313
2
48F-10-6
5/8
3/8
7/8-14
7/8
1.79
.408
2
48F-10-8
5/8
1/2
7/8-14
7/8
1.98
.501
2
48F-10-12
5/8
3/4
7/8-14
1-1/16
2.04
.501
2
48F-12-8*
3/4
1/2
1-1/16-14
1-1/16
2.17
.562
2
48F-12-12*
3/4
3/4
1-1/16-14
1-1/16
2.17
.626
2
48F-14-12*
*Thread Protectors
7/8
3/4
1-1/4-12
1-1/4
2.35
.752
L
FLOW
DIA. D
PIPE
THREAD
31043
31044
32003
31045
31046
31047
31048
31049
31050
31051
31052
31053
31054
31055
35052
31056
31057
31058
31059
35053
31060
31061
31062
31063
31064
35054
TUBE
SIZE
685
Union Tees
Ref. SAE 010401
UZ
PART
NO.
31066
31067
31068
31069
31070
31071
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
L
FLOW
DIA. D
M
5
144F-3
3/16
3/8-24
1.46
.73
.125
5
144F-4
1/4
7/16-20
1.72
.86
.189
5
144F-5
5/16
1/2-20
1.82
.91
.220
2
144F-6
3/8
5/8-18
2.08
1.04
.283
2
144F-8
1/2
3/4-16
2.46
1.23
.408
2
144F-10
5/8
7/8-14
2.78
1.39
.503
Union Tees Combination Sizes
UZ
PART
NO.
35055
35057
PK.
PARKER
PART
NO.
2
144F-6-6-4
3/8
3/8
2
144F-8-8-6
1/2
1/2
1 TUBE
SIZE
2 TUBE 3 TUBE
SIZE
SIZE
M1
FLOW
DIA. D
1.04
.89
.189
1.20
1.10
.283
L
M
1/4
2.08
3/8
2.40
Male Branch Tees
Ref. SAE 010425
UZ
PART
NO.
31072
31073
31074
31076
31077
31078
31079
31080
31081
31082
686
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
5
145F-2-2
1/8
1/8
5/16-24
1.26
.63
.69
.079
5
145F-4-2
1/4
1/8
7/16-20
1.58
.79
.76
.189
5
145F-4-4
1/4
1/4
7/16-20
1.78
.89
.92
.188
5
145F-5-4
5/16
1/4
1/2-20
1.90
.95
.96
.220
5
145F-6-4
3/8
1/4
5/8-18
1.96
.98
1.05
.281
2
145F-6-6
3/8
3/8
5/8-18
2.00
1.00
.98
.283
2
145F-6-8
3/8
1/2
5/8-18
2.28
1.14
1.26
.281
2
145F-8-6
1/2
3/8
3/4-16
2.40
1.20
1.10
.408
2
145F-8-8
1/2
1/2
3/4-16
2.46
1.23
1.36
.408
2
145F-10-8
5/8
1/2
7/8-14
2.78
1.39
1.36
.501
Male Elbows
Ref. SAE 010202
UZ
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
M
N
FLOW
DIA. D
1/8
5/16-24
.63
.73
.079
5
149F-2-2
1/8
5
249F-3-2
3/16
1/8
3/8-24
.73
.73
.126
5
249F-4-2
1/4
1/8
7/16-20
.79
.76
.189
5
249F-4-4
1/4
1/4
7/16-20
.89
.92
.189
5
249F-4-6
1/4
3/8
7/16-20
.92
1.01
.189
5
249F-5-2
5/16
1/8
1/2-20
.89
.77
.220
5
249F-5-4
5/16
1/4
1/2-20
.95
.92
.220
5
149F-5-6
5/16
3/8
1/2-20
.98
1.01
.219
5
249F-6-2
3/8
1/8
5/8-18
1.01
.89
.220
5
249F-6-4
3/8
1/4
5/8-18
.98
1.04
.283
2
249F-6-6
3/8
3/8
5/8-18
1.04
1.07
.283
2
249F-6-8
3/8
1/2
5/8-18
1.14
1.26
.283
2
149F-6-12
3/8
3/4
5/8-18
1.25
1.38
.283
2
149F-8-4
1/2
1/4
3/4-16
1.20
1.17
.312
2
249F-8-6
1/2
3/8
3/4-16
1.20
1.10
.408
2
249F-8-8
1/2
1/2
3/4-16
1.26
1.36
.408
2
149F-8-12
1/2
3/4
3/4-16
1.38
1.38
.408
2
149F-10-6
5/8
3/8
7/8-14
1.41
1.25
.408
2
249F-10-8
5/8
1/2
7/8-14
1.39
1.36
.502
2
149F-10-12
5/8
3/4
7/8-14
1.42
1.48
.502
2
149F-12-8*
3/4
1/2
1-1/16-14
1.60
1.48
.564
2
149F-12-12* 3/4
3/4
1-1/16-14
1.59
1.62
.625
31083
31084
31085
31086
31087
31088
31089
35059
31090
31091
31092
31093
35060
31094
31095
31096
31097
31098
31099
31100
31101
31102
PARKER
PART
PK. NO.
*Thread Protectors
Female Elbows
Ref. SAE 010203
UZ
PART
NO.
31103
31104
31105
31106
31107
31108
31109
31110
31111
31112
31113
31114
PK.
PARKER
PART
NO.
TUBE
SIZE
5
150F-4-2
1/4
5
150F-4-4
5
150F-5-4
5
150F-6-2
5
150F-6-4
5
PIPE
THREAD
STRAIGHT
THREAD
M
N
FLOW
DIA. D
1/8
7/16-20
.86
.50
.189
1/4
1/4
7/16-20
.95
.64
.189
A
5/16
1/4
1/2-20
1.01
.64
.220
A
3/8
1/8
5/8-18
1.08
.48
.283
B
3/8
1/4
5/8-18
1.07
.67
.283
A
150F-6-6
3/8
3/8
5/8-18
1.14
.67
.283
A
5
150F-6-8
3/8
1/2
5/8-18
1.23
.86
.283
A
2
150F-8-6
1/2
3/8
3/4-16
1.25
.69
.408
A
2
150F-8-8
1/2
1/2
3/4-16
1.36
.94
.408
A
2
150F-8-12
1/2
3/4
3/4-16
1.41
.94
.408
A
2
150F-10-8
5/8
1/2
7/8-14
1.48 1.01
.502
A
2
150F-10-12 5/8
3/4
7/8-14
1.64
.502
A
.98
TYPE
A
Type A
Type B
687
Male Run Tees
Ref. SAE 010424
UZ
PARKER
PART
PART
NO.
PK.
NO.
35062
35063
35064
35065
35066
35067
35068
35069
35070
5
5
5
5
2
2
2
2
2
TUBE
SIZE
PIPE
THREAD
151F-4-2
1/4
151F-4-4
1/4
151F-5-4 5/16
151F-6-4
3/8
151F-6-6
3/8
151F-6-8
3/8
151F-8-6
1/2
151F-8-8
1/2
151F-10-8 5/8
1/8
1/4
1/4
1/4
3/8
1/2
3/8
1/2
1/2
STRAIGHT
THREAD
M
7/16-20
7/16-20
1/2-20
5/8-18
5/8-18
5/8-18
3/4-16
3/4-16
7/8-14
N
.86
.92
.92
1.04
.98
1.26
1.20
1.35
1.36
.76
.89
.95
1.04
1.00
1.16
1.10
1.23
1.39
FLOW
DIA. D
.189
.189
.220
.283
.283
.283
.406
.408
.500
Union Elbows
Ref. SAE 010201
UZ
PARKER
PART
PART
NO.
PK.
NO.
31115 5
155F-2
31116 5
155F-3
31117 5
155F-4
31118 5
155F-5
31119 5
155F-6
31120 2
155F-8
31121 2
155F-10
31122 2
155F-12*
*Thread Protectors
TUBE
SIZE
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
STRAIGHT
THREAD
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
7/8-14
1-1/16-14
FLOW
DIA.D
.079
.126
.189
.220
.283
.408
.502
.625
M
.64
.73
.86
.92
1.04
1.31
1.39
1.63
45° Elbows
Ref. SAE 010302
UZ
PART
NO.
PK.
31123 2
31124 2
31125 2
31126 2
31127 2
31128 2
31133 2
31129 2
31130 2
31131 2
31132 2
PARKER
PART
TUBE
NO.
SIZE
159F-4-2 1/4
159F-4-4 1/4
159F-5-2 5/16
159F-5-4 5/16
159F-6-4 3/8
159F-6-6 3/8
159F-8-4 1/2
159F-8-6 1/2
159F-8-8 1/2
159F-10-6 5/8
159F-10-8 5/8
PIPE
THREAD
1/8
1/4
1/8
1/4
1/4
3/8
1/4
3/8
1/2
3/8
1/2
STRAIGHT
THREAD
7/16-20
7/16-20
1/2-20
1/2-20
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
M
.78
.75
.75
.75
.89
.91
1.06
1.06
1.00
1.13
1.21
N
.56
.84
.65
.81
.86
.93
.95
.95
.87
.95
1.16
FLOW
DIA. D
.188
.188
.220
.220
.283
.283
.408
.408
.406
.406
.503
Flared Seal Plugs
688
UZ
PART
NO.
31135
31136
31137
31138
31139
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
5
5
5
2
2
639F-4
639F-5
639F-6
639F-8
639F-10
1/4
5/16
3/8
1/2
5/8
7/16-20
1/2-20
5/8-18
3/4-16
7/8-14
7/16
1/2
5/8
3/4
7/8
.69
.78
.88
1.06
1.19
Cap Nuts
UZ
PART
NO.
31140
31141
31142
31143
31144
31145
PK.
PARKER
PART
NO.
TUBE
SIZE
5
640F-3*
3/16
3/8-24
1/2
.47
5
640F-4*
1/4
7/16-20
9/16
.53
5
640F-5*
5/16
1/2-20
5/8
.62
5
640F-6*
3/8
5/8-18
3/4
.58
2
640F-8*
1/2
3/4-16
STRAIGHT
THREAD
2
640F-10*
5/8
7/8-14
*Should be used with 2GF copper gasket (35002, etc.).
C
HEX
L
7/8
.84
1-1/16
.97
Flared Unions-Female Flare to Female Flare
Ref. SAE 010107
UZ
PART
NO.
35072
35073
35074
32007
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
FLOW
DIA. D
1/4
7/16-20
5/8
1.03
.250
L
5
660FHD-4*
5
660FHD-6*
3/8
5/8-18
13/16
1.26
.375
2
660FHD-8*
1/2
3/4-16
15/16
1.43
.500
2
660FHD-10* 5/8
7/8-14
1-1/16
1.69
.626
Reducers-Male Flare to Female Flare
Ref. SAE 010105
35075
35076
35077
35078
35079
35080
35081
32008
32009
PK.
PARKER
PART
NO.
1
TUBE
SIZE
2
1
2
TUBE STRAIGHT STRAIGHT
SIZE THREAD
THREAD
2
661FHD-4-6*
1/4
3/8
7/16-20
5/8-18
13/16
1.20
.189
2
661FHD4-8*
1/4
1/2
7/16-20
3/4-16
15/16
1.36
.189
2
661FHD-6-4*
3/8
1/4
5/8-18
7/16-20
5/8
1.10
.283
2
661FHD-6-8*
3/8
1/2
5/8-18
3/4-16
15/16
1.42
.283
2
661FHD-8-6*
1/2
3/8
3/4-16
5/8-18
13/16
1.39
.377
2
661FHD-8-10*
1/2
5/8
3/4-16
7/8-14
1-1/16
1.67
.408
3/4-16
15/16
1.60
.502
1-1/16-14 1-5/16
1.95
.502
1.86
.626
2
661FHD-10-8*
5/8
1/2
7/8-14
2
661FHD-10-12*
5/8
3/4
7/8-14
2
661FHD-12-10* 3/4
5/8 1-1/16-14
7/8-14
C
HEX
1-1/16
L
UZ
PART
NO.
FLOW
DIA. D
Female Flare to Male Pipe Thread Reducer
Ref. SAE 010106
UZ
PART
NO.
PK.
PARKER
PART
NO.
2
664FHD-4-2* 1/4
1/8
7/16-20
2
664FHD-4-4* 1/4
1/4
7/16-20
2
664FHD-6-4* 3/8
1/4
5/8-18
2
664FHD-8-6* 1/2
3/8
3/4-16
*Should be used with 2GF copper flare gasket (35002, etc.).
15/16 1.36
.406
35082
35083
35084
35085
TUBE
PIPE
TRAIGHT
SIZE THREAD THREAD
C
HEX
L
FLOW
DIA. D
5/8
.91
.219
5/8
1.01
.250
13/16 1.28
.344
689
Brass Inverted Flared Fittings
Advantages
Built to resist mechanical pullout. This economical fitting can be assembled and disassembled repeatedly.
Manufactured from CA 360 or CA 345 brass.
Specifications
Listed with Underwriter’s Laboratories for flammable liquid and gas.
Meets functional requirements of SAE, J512, ASA, ASME and MS
(Military Standards).
Assembly
Instructions
1. Cut tubing squarely and clean tube end thoroughly to
remove burrs.
2. Place nut onto tube. Place threaded end of nut toward end
of tube.
Applications
3. On thin wall copper, welded or brazed tubing, use double flare
Use with copper, brass, aluminum and welded steel hydraulic
tubing that can be flared. Manufactured especially for hard-to-hold
liquids and gases.
screwing nut on finger-tight. Tighten with a wrench an
additional 1/4 turn for a metal-to-metal seal.
Working Pressure
Ranges
to prevent pinch-off or cracked flares.
4. Clamp tube flare between nut and flare seat of body by
Note: The seat dimensions are predicated on practical threading
Temperature 73° with copper tubing:
PSI
TUBE O.D. (IN.)
TUBE WALL (IN.)
2800
1/8
.030
1900
3/16
.030
1400
1/4
.030
1200
5/16
.032
1000
3/8
.032
750
1/2
.032
650
5/8
.035
550
3/4
.035
Temperature Ranges
From -65° to +250°F.
limitations and use of these fittings with double flared tubing.
Nomenclature
and size of the fitting. The first series of numbers and letters identifies the style and type fitting. The second series of numbers
describes the size.
EXAMPLE:
48
Half Union
Inverted Flared (Light Duty)
Inverted Flared (Heavy Duty)
1/4" (4/16) Tube O.D.
1/8" (2/16) Pipe Thread
IF
IFHD
-4
Sizes
Tube sizes are determined by the numbers of sixteenths of an inch
in the tube O.D.
Available in
an Assortment
Vibration
Will withstand minimal vibration movements.
PART # 00535
Found on Page 661
690
-2
Nuts
Ref. SAE 040110
UZ
PART
NO.
31146
31147
31148
31149
31150
31151
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
D
10
41IF-2
1/8
5/16-28
5/16
.52
.133
10
41IF-3
3/16
3/8-24
3/8
.56
.197
10
41IF-4
1/4
7/16-24
7/16
.56
.259
10
41IF-5
5/16
1/2-20
1/2
.62
.321
10
41IF-6
3/8
5/8-18
5/8
.66
.384
5
41IF-8
1/2
3/4-18
3/4
.74
.508
L
D
Steel Nuts-Zinc Chromate
Ref. SAE 040110
UZ
PART
NO.
10
10
10
10
10
5
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
41IFS-2
1/8
5/16-28
5/16
.52
.132
41IFS-3
3/16
3/8-24
3/8
.56
.196
41IFS-4
1/4
7/16-24
7/16
.56
.259
41IFS-5
5/16
1/2-20
1/2
.62
.321
41IFS-6
3/8
5/8-18
5/8
.66
.384
41IFS-8
1/2
3/4-18
3/4
.74
.508
5
41IFS-10
5/8
7/8-18
7/8
.80
.633
5
41IFS-12
3/4
1-1/16-16
1-1/16
.88
.759
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
D
10
42IFHD-2
1/8
5/16-28
13/32
.60
.078
10
42IFHD-3
3/16
3/8-24
15/32
.65
.125
10
42IFHD-4
1/4
7/16-24
17/32
.63
.189
10
42IFHD-5
5/16
1/2-20
19/32
.71
.220
5
42IFHD-6
3/8
5/8-18
3/4
.81
.283
2
42IFHD-8
1/2
3/4-18
29/32
.92
.408
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
31152
31153
31154
31155
31156
31157
35086
35087
PK.
PARKER
PART
NO.
Unions
Ref. SAE 040101
UZ
PART
NO.
31158
31159
31160
31161
31162
31163
Female Connectors
Ref. SAE 040103
UZ
PART
NO.
31165
31166
31167
31168
31169
PK.
PARKER
PART
NO.
C
HEX
1/2
L
FLOW
DIA.D
.76
.125
5
46IFHD-3-2
3/16
1/8
3/8-24
5
46IFHD-4-2
1/4
1/8
7/16-24 17/32
.76
.189
5
46IFHD-5-2
5/16
1/8
1/2-20
.79
.220
5
46IFHD-6-4
3/8
1/4
5/8-18
3/4
1.04
.283
2
46IFHD-8-6
1/2
3/8
3/4-18
29/32
1.10
.408
19/32
691
Male Connectors
Ref. SAE 040102
UZ
PARKER
PART
PART
NO.
PK.
NO.
31170
31171
31172
31173
31174
31175
31176
31177
31178
31179
31180
31181
35088
32010
TUBE PIPE STRAIGHT
SIZE THREAD THREAD
C
HEX
L
FLOW
DIA. D
10
48IFHD-2-2
1/8
1/8
5/16-28
13/32
.63
.078
10
48IFHD-3-2
3/16
1/8
3/8-24
15/32
.70
.125
10
48IFHD-4-2
1/4
1/8
7/16-24
17/32
.74
.188
10
48IFHD-4-4
1/4
1/4
7/16-24
9/16
.89
.189
10
48IFHD-5-2
5/16
1/8
1/2-20
19/32
.79
.219
10
48IFHD-5-4
5/16
1/4
1/2-20
19/32
.98
.220
5
48IFHD-6-2
3/8
1/8
5/8-18
3/4
.89
.220
5
48IFHD-6-4
3/8
1/4
5/8-18
3/4
1.03
.283
5
48IFHD-6-6
3/8
3/8
5/8-18
3/4
1.03
.283
2
48IFHD-8-4
1/2
1/4
3/4-18
29/32
1.07
.346
2
48IFHD-8-6
1/2
3/8
3/4-18
29/32
1.07
.408
2
48IFHD-8-8
1/2
1/2
3/4-18
29/32
1.26
.408
2
48IFHD-10-8
5/8
1/2
7/8-18
1-1/16
1.32
.533
2
48IFHD-14-12 7/8
3/4
1-3/16-16
1-5/16
1.30
.750
Union Tees
Ref. SAE 040401
UZ
PARKER
PART
PART
NO.
PK.
NO.
31182
31183
31184
31185
31186
TUBE
SIZE
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
5
244IFHD-3
3/16
3/8-24
1.10
.55
.39
.125
5
244IFHD-4
1/4
7/16-24
1.13
.56
.42
.189
5
244IFHD-5
5/16
1/2-20
1.26
.63
.45
.220
5
244IFHD-6
3/8
5/8-18
1.48
.74
.56
.283
2
244IFHD-8
1/2
3/4-18
1.76
.88
.67
.408
Male Branch Tees
Ref. SAE 040425
UZ
PARKER
PART
PART
NO.
PK.
NO.
32011
692
5
245IFHD-4-2
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
1/4
1/8
7/16-24
.85
.43
.64
.189
Male Elbows
Ref. SAE 040202
UZ
PARKER
PART
PART
NO.
PK.
NO.
31188
31189
31190
31191
31192
31193
31194
31195
31196
31197
31198
31199
32012
35089
32013
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
10
249IFHD-2-2
1/8
1/8
5/16-28
.79
.25
.58
.078
10
249IFHD-3-2
3/16
1/8
3/8-24
.85
.27
.61
.125
10
249IFHD-4-2
1/4
1/8
7/16-24
.92
.33
.65
.189
10
249IFHD-4-4
1/4
1/4
7/16-24
1.10
.27
.83
.189
10
249IFHD-5-2
5/16
1/8
1/2-20
.98
.47
.68
.219
10
249IFHD-5-4
5/16
1/4
1/2-20
1.16
.46
.86
.220
5
249IFHD-6-2
3/8
1/8
5/8-18
1.13
.53
.76
.220
5
249IFHD-6-4
3/8
1/4
5/8-18
1.32
.53
.95
.283
5
249IFHD-6-6
3/8
3/8
5/8-18
1.32
.50
.94
.283
2
249IFHD-8-4
1/2
1/4
3/4-18
1.48
.59
1.02
.408
2
249IFHD-8-6
1/2
3/8
3/4-18
1.48
.59
1.02
.408
2
249IFHD-8-8
1/2
1/2
3/4-18
1.67
.66
1.22
.408
2
249IFHD-10-6
5/8
3/8
7/8-18
1.62
.67
1.09
.533
2
249IFHD-10-8
5/8
1/2
7/8-18
1.82
.67
1.29
.533
2
249IFHD-14-12 7/8
3/4
1-3/16-16 2.12
.91
1.44
.750
Female Elbows
UZ
PART
NO.
32014
31201
31202
31203
PK.
PARKER
PART
NO.
5
5
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
M
N
FLOW
DIA. D
250IFHD-3-2
3/16
250IFHD-4-2
1/4
1/8
3/8-24
.50
.49
.125
1/8
7/16-24
.53
.53
.189
5
250IFHD-5-2
5
250IFHD-6-4
5/16
1/8
1/2-20
.59
.59
.220
3/8
1/4
5/8-18
.67
.68
.283
Ref. SAE 040203
693
Union Elbow
Ref. SAE 040201
UZ
PART
NO.
PK.
PARKER
PART
NO.
31209
5
255IFHD-4
TUBE
SIZE
STRAIGHT
THREAD
M
FLOW
DIA. D
1/4
7/16-24
.55
.189
45° Elbows
Ref. SAE 040302
UZ
PART
NO.
TUBE
SIZE
PIPE
THREAD
5
259IFHD-3-2
3/16
1/8
3/8-24
17/32
5
259IFHD-4-2
1/4
1/8
7/16-24
5
259IFHD-5-2
5/16
1/8
1/2-20
5
259IFHD-5-4
5/16
1/4
1/2-20
5
259IFHD-6-4
3/8
1/4
5/8-18
2
259IFHD-8-6
1/2
3/8
3/4-18
2
259IFHD-10-8
5/8
1/2
7/8-18
PK.
STRAIGHT
C
THREAD HEX
31210
31211
31212
31213
31214
31215
32015
PARKER
PART
NO.
694
L
FLOW
DIA. D
.88
.125
9/16
.94
.187
5/8
1.00
.220
5/8
1.16
.220
25/32
1.34
.283
7/8
1.44
.375
1-1/16
1.75
.533
Brass Pipe Fittings
Advantages
All pipe fitting threads are made to Dryseal standards. Connectors, unions, nuts, extruded elbows and tees are machined from CA
360 and CA 345 brass; forged elbows and tees are machined from CA 377 brass.
Specifications
Pipe thread assembly guide (turns method)
For Dryseal threads with pre-applied Vibra Seal
Applications
1. Tighten external thread into
the internal thread.
2. Tighten an additional 2
revolutions with a wrench up
to 1/2 in. male pipe thread.
Above 1/2 in., 1-1/2 to
2-1/2 revolutions.
Meets functional requirements of the SAE J530, SAE J531, ASME
and ASA.
Straight Fittings
Use with brass, copper or iron pipe. Manufactured for low and medium pressure line connection work.
Working Pressure
From -65° to +250°F. at 1000 PSI.
Temperature Ranges
From -65° to +250°F
Fair resistance to vibration and pipe movement depending upon conditions.
Nomenclature
describes the size.
Example:
2
Forging (1)
Extrusion (2)
45° Street Elbow
Pipe
1/8” (2/16) Pipe Thread
1/8” (2/16) Pipe Thread
214
P
-2
-2
1. Tighten external thread into
the internal thread.
2. Tighten an additional 1 to 1-1/2
revolutions with a wrench.
3. Tighten fitting, Clock-wise,
to Align with Tubing
(never counter clockwise).
Note: To minimize the possibility
of a leaking threaded joint af ter
assembling male to female pipe
threads,neither end should be
backed out (loosened) once the
assembly has been made.
Available in
an Assortment
Sizes
Elbow or Tee Fittings
Vibration
Pipe sizes are determined by the number of sixteenths of an inch in
the pipe size.
PART # 00466
Found on Page 664
PART # 00466KP
Found on Page 664
PART # 00534
Found on Page 662
PART # 00543
Found on Page 662
PART # 00544
Found on Page 662
PART # 123840
Found on Page 663
695
Brass Pipe Fittings
Anchor Couplings
UZ
PART
NO.
35202
35203
35204
35205
35206
PK.
PARKER
PART
NO.
5
207ACBH-2
1/8
5/8-18
5
207ACBH-4
1/4
3/4-16
1
1-1/8
.81
1.50
.421
5
207ACBHS-4
1/4
3/4-16
1
1
.25
.94
.421
5
207ACBH-6
3/8
1-14
1-1/8
1-1/4
.62
1.31
.570
2
207ACBH-8
1/2
1-1/8-14
1-1/4
1-3/8
.75
1.50
.688
PIPE STRAIGHT
THREAD THREAD
B
HEX
C
HEX
MAX
BULKHEAD
P
7/8
15/16
.89
1.50
.328
Couplings
Ref. SAE 130138
UZ
PARKER
PART
PART
NO.
PK. NO.
31609 10
31610 10
31611 10
31612
5
221606 5
PIPE
THREAD
C
HEX
FLOW
DIA. D
207P-2
1/8
9/16
.75
.328
207P-4
1/4
3/4
1.12
.422
L
207P-6
3/8
7/8
1.12
.562
207P-8
1/2
1-1/16
1.50
.688
207P-12
3/4
1-3/8
1.53
.900
Reducer Couplings
Ref. SAE 130138
UZ
PARKER
PART
PART
NO.
PK.
NO.
31613
221734
31614
31615
31616
32016
32017
1
PIPE
THREAD
2
PIPE
THREAD
C
HEX
L
FLOW
DIA. D
5
208P-4-2
1/4
1/8
3/4
.97
.328
5
—
3/8
1/8
—
—
—
5
208P-6-4
3/8
1/4
7/8
1.16
.422
2
208P-8-4
1/2
1/4
1-1/16
1.28
.422
2
208P-8-6
1/2
3/8
1-1/16
1.38
.562
2
208P-12-6
3/4
3/8
1-3/8
1.32
.562
2
208P-12-8
3/4
1/2
1-3/8
1.50
.688
1
PIPE
THREAD
2
PIPE
THREAD
C
HEX
L
209P-4-2
1/8
1/4
9/16
.75
.328
Bushings
Ref. SAE 130140
UZ
PARKER
PART
PART
NO.
PK.
NO.
31617
31618
31619
31620
31621
31622
35207
31623
31624
31625
221620
696
10
FLOW
DIA. D
10
209P-6-2
1/8
3/8
11/16
.75
.328
10
209P-6-4
1/4
3/8
3/4
.75
.422
5
209P-8-2
1/8
1/2
7/8
1.00
.328
5
209P-8-4
1/4
1/2
7/8
1.00
.422
5
209P-8-6
3/8
1/2
7/8
1.00
.562
2
209P-12-2
1/8
3/4
1-1/8
1.00
.328
2
209P-12-4
1/4
3/4
1-1/8
1.00
.422
2
209P-12-6
3/8
3/4
1-1/8
1.00
.562
2
209P-12-8
1/2
3/4
1-1/8
1.00
.688
2
209P-16-12
3/4
1
—
—
—
L
FLOW
DIA. D
Brass Pipe Fittings
Lock Nuts
UZ
PART
NO.
31626
31627
31628
31629
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
25
210P-2
1/8 NPSL
11/16
.19
25
210P-4
1/4 NPSL
7/8
.25
10
210P-6
3/8 NPSL
1
.25
10
210P-8
1/2 NPSL
1-1/8
.25
Square-Head Plugs
UZ
PART
NO.
31630
31631
31632
31633
31634
PK.
PARKER
PART
NO.
PIPE
THREAD
C
L
M
10
211P-2
1/8
9/32
.59
.25
10
211P-4
1/4
3/8
.80
.30
10
211P-6
3/8
15/32
.80
.30
5
211P-8
1/2
9/16
1.07
.39
5
211P-12
3/4
5/8
1.14
.45
PIPE
THREAD
C
HEX
L
D
Unions
UZ
PART
NO.
5
—
1/8
—
—
—
5
212P-4
1/4
1-3/16
1.53
.422
2
212P-6
3/8
1-1/4
1.79
.562
2
—
1/2
—
—
—
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
10
213P-2
1/8
9/16
.50
221730
31635
31636
221731
PK.
PARKER
PART
NO.
Caps
UZ
PART
NO.
31637
31638
31639
31640
221632
10
213P-4
1/4
11/16
.63
5
213P-6
3/8
13/16
.63
5
213P-8
1/2
1-1/16
.87
5
213P-12
3/4
—
—
Close Nipples
UZ
PART
NO.
31641
31642
31643
31644
31645
PK.
PARKER
PART
NO.
PIPE
THREAD
L
FLOW
DIA.D
10
215PN-2
1/8
.75
.281
10
215PN-4
1/4
.88
.375
10
215PN-6
3/8
1.00
.500
5
215PN-8
1/2
1.13
.625
5
215PN-12
3/4
1.31
.750
697
Brass Pipe Fittings
Long Nipples
UZ
PART
NO.
31646
31647
31648
31649
31650
31651
31652
31653
31654
31655
31656
31657
31658
31659
31660
31661
35208
35209
35210
35211
221657
PK.
PARKER
PART
NO.
PIPE
THREAD
FLOW
DIA. D
L
5
215PNL-2-15
1/8
1-1/2
.250
5
215PNL-4-15
1/4
1-1/2
.375
5
215PNL-6-15
3/8
1-1/2
.500
2
215PNL-8-15
1/2
1-1/2
.625
5
215PNL-2-20
1/8
2
.250
5
215PNL-4-20
1/4
2
.375
5
215PNL-6-20
3/8
2
.500
2
215PNL-8-20
1/2
2
.625
5
215PNL-2-25
1/8
2-1/2
.250
5
215PNL-4-25
1/4
2-1/2
.375
5
215PNL-6-25
3/8
2-1/2
.500
2
215PNL-8-25
1/2
2-1/2
.625
2
215PNL-2-30
1/8
3
.250
2
215PNL-4-30
1/4
3
.375
2
215PNL-6-30
3/8
3
.500
2
215PNL-8-30
1/2
3
.625
2
215PNL-2-35
1/8
3-1/2
.250
2
215PNL-4-35
1/4
3-1/2
.375
2
215PNL-6-35
3/8
3-1/2
.500
2
215PNL-8-35
1/2
3-1/2
.625
2
—
3/4
2
—
Hex Nipples
Ref. SAE 130137
UZ
PART
NO.
31662
31663
31664
31665
221662
PK.
PARKER
PART
NO.
5
216P-2
1/8
5
216P-4
1/4
9/16
1.38
.314
5
216P-6
3/8
11/16
1.41
.440
2
216P-8
1/2
7/8
1.81
.564
2
216P-12
3/4
1-1/16
1.81
.752
PIPE
THREAD
C
HEX
L
FLOW
DIA. D
7/16
.97
.220
Hex Nipple Reducers
UZ
PART
NO.
31666
31667
31668
31669
32018
698
PK.
PARKER
PART
NO.
1
PIPE
THREAD
2
PIPE
THREAD
5
216P-4-2
1/4
5
216P-6-2
3/8
5
216P-6-4
2
216P-8-6
2
216P-12-8
C
HEX
L
FLOW
DIA. D
1/8
9/16
1.19
.220
1/8
11/16
1.22
.220
3/8
1/4
11/16
1.41
.314
1/2
3/8
7/8
1.62
.440
3/4
1/2
1-1/16
1.80
.564
Brass Pipe Fittings
Hex-Head Plugs
UZ
PART
NO.
31670
31671
31672
31673
221670
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
10
218P-2
1/8
7/16
.560
10
218P-4
1/4
9/16
.750
10
218P-6
3/8
11/16
.780
5
218P-8
1/2
7/8
.970
5
218P-12
3/4
1-1/16
1.063
Countersunk Hex-Head Plugs
UZ
PART
NO.
31674
31675
31676
31677
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
10
219P-2
1/8
3/16
.30
10
219P-4
1/4
1/4
.46
10
219P-6
3/8
5/16
.47
5
219P-8
1/2
3/8
.61
Slotted-Head Plugs
UZ
PART
NO.
10
220P-2
1/8
.31
10
220P-4
1/4
.42
10
220P-6
3/8
.43
PIPE
THREAD
L
31678
31679
31680
PK.
PARKER
PART
NO.
Adapters
Ref. SAE 130139
UZ
PART
NO.
31681
31682
31683
32019
31684
31685
221683
31686
31687
32020
221684
32021
PK.
PARKER
PART
NO.
1
PIPE
THREAD
2
PIPE
THREAD
C
HEX
L
FLOW
DIA. D
5
222P-2-2
1/8
1/8
9/16
.88
.218
5
222P-4-2
1/4
1/8
3/4
1.06
.218
5
222P-4-4
1/4
1/4
3/4
1.25
.314
5
222P-6-2
3/8
1/8
7/8
1.10
.218
5
222P-6-4
3/8
1/4
7/8
1.25
.314
5
222P-6-6
3/8
3/8
7/8
1.25
.440
2
222P-8-4
1/2
1/4
1
1.47
.312
2
222P-8-6
1/2
3/8
1-1/16
1.47
.440
2
222P-8-8
1/2
1/2
1-1/16
1.66
.562
2
222P-12-6
3/4
3/8
1-3/8
1.50
.440
2
222P-12-8
3/4
1/2
1-3/8
1.69
.562
2
222P-12-12
3/4
3/4
1-3/8
1.69
.751
699
Brass Pipe Fittings
90° Union Elbows
Ref. SAE 130238
UZ
PART
NO.
PK.
31688
31689
31690
31691
32022
31692
31693
221690
PARKER
PART
NO.
PIPE
THREAD
M
FLOW
DIA. D
5
1200P-2-2
1/8
.56
.328
5
2200P-2-2
1/8
.55
.328
5
1200P-4-4
1/4
.81
.422
5
2200P-4-4
1/4
.78
.422
5
1200P-6-6
3/8
.84
.562
5
2200P-6-6
3/8
.84
.563
2
2200P-8-8
1/2
1.09
.687
3/4
—
—
2
—
90° Street Elbows
Ref. SAE 130239
UZ
PARKER
PART
PART
NO.
PK.
NO.
31694
31695
31696
31697
31698
31699
31700
31701
221698
1
PIPE
THREAD
2
PIPE
THREAD
M
N
5
1202P-2-2
1/8
1/8
.81
.56
.220
5
2202P-2-2
1/8
1/8
.62
.48
.220
5
2202P-4-2
1/4
1/8
.72
.51
.209
5
1202P-4-4
1/4
1/4
1.08
.69
.314
5
2202P-4-4
1/4
1/4
.91
.45
.312
5
1202P-6-6
3/8
3/8
1.25
.78
.428
5
2202P-6-6
3/8
3/8
.98
.54
.428
2
2202P-8-8
1/2
1/2
1.25
1.03
.552
2
2202P-12-12
3/4
3/4
1.38
1.10
.750
Union Tees
Ref. SAE 130438
UZ
PARKER
PART
PART
PIPE
NO.
PK.
NO.
THREAD
31702
31703
31704
31705
31706
31707
221732
L
M
FLOW
DIA. D
.328
5
1203P-2
1/8
1.12
.56
5
2203P-2
1/8
1.06
.53
.328
5
1203P-4
1/4
1.38
.69
.422
5
2203P-4
1/4
1.52
.76
.422
5
2203P-6
3/8
1.68
.84
.562
2
2203P-8
1/2
2.14
1.07
.688
2
2203P-12
3/4
2.28
1.14
.900
Male Elbows
700
UZ
PART
NO.
32023
32024
32025
32026
FLOW
DIA. D
PK.
PARKER
PART
NO.
PIPE
THREAD
M
5
5
5
2
1204P-2
1204P-4
1204P-6
1204P-8
1/8
1/4
3/8
1/2
.71
1.09
1.09
1.41
FLOW
DIA. D
.220
.312
.406
.562
Brass Pipe Fittings
Male Branch Tees
Ref. SAE 130425
UZ
PART
NO.
31712
31713
31714
32027
PK.
PARKER
PART
NO.
PIPE
THREAD
L
M
N
FLOW
DIA. D
5
2224P-2
1/8
1.06
.53
.66
.220
5
2224P-4
1/4
1.52
.76
.91
.314
5
2224P-6
3/8
1.68
.84
2
2224P-8
1/2
2.18
.97
.438
1.09 1.26
.592
Street Tees
Ref. SAE 130424
UZ
PART
NO.
31715
31716
31717
31718
32028
PK.
PARKER
PART
NO.
PIPE
THREAD
M
N
FLOW
DIA. D
5
2225P-2
1/8
.55
.66
.220
5
2225P-4
1/4
.76
.91
.312
5
2225P-6
3/8
.82
.99
.440
2
2
2225P-8
2225P-12
1/2
3/4
1.07
1.14
1.27
1.38
.564
.750
45° Female Elbows
UZ
PART
NO.
PIPE
THREAD
M
FLOW
DIA. D
2201P-2-2
1/8
.43
.328
PK.
PARKER
PART
NO.
PIPE
THREAD
M
FLOW
DIA. D
5
2205P-2
1/8
.53
.328
5
2205P-4
1/4
.75
.421
2
2205P-6
3/8
.82
.562
2
2
2205P-8
2205P-12
1/2
3/4
1.07
1.14
.688
.900
PK.
5
35213
PARKER
PART
NO.
Crosses
UZ
PART
NO.
35214
35215
35216
32029
221733
45° Street Elbows
Ref. SAE 130339
UZ
PART
NO.
31708
31709
31710
31711
221735
PK.
PARKER
PART
NO.
5
2214P-2-2
5
2214P-4-4
5
2
2
PIPE
THREAD
M
N
FLOW
DIA. D
1/8
.38
.50
.220
1/4
.54
.70
.314
2214P-6-6
3/8
.54
.78
.440
2214P-8-8
2214P-12-12
1/2
3/4
.73
.73
1.00
1.04
.562
.750
701
Brass Compression Fittings
Advantages
No flaring, soldering or other preparation of tubing
necessary to assemble. Manufactured from CA 360,
CA 345 or CA 377 brass.
Specifications
Listed with Underwriter’s Laboratories for flammable liquid.
Compression fittings meet functional requirements of SAE J-512,
ASA and ASME. Refer to list of UL listed fittings for specific
configurations.
1. Slice nut, then sleeve onto tubing. The thread end of
the nut must face out.
2. Insert the tube into the fitting. Be sure the tube is
bottomed on the fitting shoulder.
3. Assemble nut to body, and tighten “hand-tight”.
Then follow the number of wrench turns as indicated
in the following table.
Turns required to seal from hand-tight
Applications
Use with copper, brass and aluminum. Not recommended for
steel tubing. Manufactured for low and medium pressure
tubing connection work where excessive vibration or tube
movement is not involved. Not recommended for application
using gaseous media.
Temperature 73°F:
PSI
TUBE O.D. (IN.)
TUBE WALL (IN.)
400
1/8
.030
400
3/16
.030
300
1/4
.030
300
5/16
.032
200
3/8
.032
200
1/2
.032
150
5/8
.035
100
3/4
.035
75
7/8
.035
Temperature Ranges
From -65° to +250°F.
Vibration
Fair resistance to vibration or tube movement, depending on
applications involved. Use long nut for additional resistance
to vibration.
Fitting Size
Tube Size
2
1/8
With 60C With 60PT
1-1/4
—
3
3/16
1-1/4
—
4
1/4
1-1/4
2
5
5/16
1-1/4
2
6
3/8
2-1/4
2
8
1/2
2-1/4
2
10
5/8
2-1/4
2
12
3/4
2-1/4
—
14
7/8
2-1/4
—
Nomenclature
Part numbers are constructed from symbols that identify the
style and size of the fitting. The first series of numbers and letters
identifies the style and type fitting. The second series of numbers
describes the size.
EXAMPLE:
2
Extrusion (2)
Forging (1)
Male Elbow
Compression
3/8" (6/16) Tube O.D.
69
C
-6
Sizes
Tube sizes are determined by the numbers of sixteenths of an
inch in the tube O.D.
Available in
an Assortment
PART # 00536
Found on Page 664
702
-4
Tapered Sleeves
Ref. SAE 06015
UZ
PART
NO.
PK.
31511 25
31512
31513
31514
31515
31516
31517
31518
35142
35143
PARKER
PART
NO.
60C-2
TUBE
SIZE
1/8
A
.187
D
.130
L
.19
25
60C-3
3/16
.266
.192
.22
25
60C-4
1/4
.344
.255
.25
25
60C-5
5/16
.406
.318
.25
25
60C-6
3/8
.469
.382
.25
25
60C-7
7/16
.531
.444
.31
10
60C-8
1/2
.594
.507
.38
10
60C-10
5/8
.719
.632
.38
10
60C-12
3/4
.875
.758
.44
10
60C-14
7/8
1.000
.883
.41
Delrin Sleeves
UZ
PART
NO.
31519
31520
31521
31522
31523
35144
PK.
25
PARKER
PART
NO.
60PT-4
PLASTIC
TUBE
WALL
1/4
TUBE
WALL
.040
A
.375
D
.254
L
.19
25
60PT-5
5/16
.062
.438
.317
.19
25
60PT-6
3/8
.062
.500
.379
.19
10
60PT-8
1/2
.062
.631
.507
.25
10
60PT-10
5/8
.062
.747
.632
.22
10
60PT-12
3/4
.062
.931
.760
.25
PARKER
PART
NO.
61C-2
TUBE
SIZE
1/8
STRAIGHT
THREAD
5/16-24
C
HEX
3/8
D
.130
L
.38
25
61C-3
3/16
3/8-24
7/16
.192
.41
25
61C-4
1/4
7/16-24
1/2
.255
.44
25
61C-5
5/16
1/2-24
9/16
.318
.44
10
61C-6
3/8
9/16-24
5/8
.382
.47
10
61C-7
7/16
5/8-24
11/16
.444
.50
5
61C-8
1/2
11/16-20
13/16
.507
.62
5
61C-10
5/8
13/16-18
15/16
.632
.62
5
61C-12
3/4
1-18
1-3/16 .758
.69
5
61C-14
7/8
1-1/8-18
1-1/4
.890
.62
PARKER
PART
NO.
61CL-4
TUBE
SIZE
1/4
STRAIGHT
THREAD
7/16-24
C
HEX
1/2
D
.255
L
.75
10
61CL-5
5/16
1/2-24
9/16
.318
.84
10
61CL-6
3/8
9/16-24
5/8
.382
.97
5
61CL-8
1/2
11/16-20
13/16
.507
1.06
2
61CL-10
5/8
13/16-18
15/16
.632
1.19
2
61CL-12
3/4
1/18
1-3/16
.758
1.38
Ref. SAE 060110
UZ
PART
NO.
PK.
31524 25
31525
31526
31527
31528
31529
31530
31531
35145
35146
Nuts
Long Nuts
Ref. SAE 060111
UZ
PART
NO.
PK.
35147 10
35148
35149
35150
35151
35152
703
Unions
Ref. SAE 060101 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
31532
31533
31534
31535
31536
31537
31538
31539
35153
35154
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
M
FLOW
DIA. D
5
62C-2
1/8
5/16-24
5/16
1.05
.64
.094
5
62C-3
3/16
3/8-24
3/8
1.21
.72
.125
5
62C-4
1/4
7/16-24
7/16
1.33
.79
.188
5
62C-5
5/16
1/2-24
1/2
1.39
.85
.250
5
62C-6
3/8
9/16-24
9/16
1.52
.97
.312
5
62C-7
7/16
5/8-24
5/8
1.70
1.02
.312
2
62C-8
1/2
11/16-20
11/16 1.90
1.08
.406
2
62C-10
5/8
13/16-18
13/16 2.06
1.23
.500
2
62C-12
3/4
1-18
1
2.37
1.41
.562
2
62C-14
7/8
1-1/8-18
1-1/8
2.07
1.19
.766
Union Reducers
Ref. SAE 060101 BA
UZ
PART
NO.
35155
35156
35157
35158
PK.
PARKER
PART
NO.
1
TUBE
SIZE
2
TUBE
SIZE
1
STRAIGHT
THREAD
2
STRAIGHT
THREAD
C
HEX
L
M
FLOW
DIA. D
2
62C-4-3
3/16
2
62C-6-4
1/4
1/4
3/8-24
7/16-24
7/16
1.29
.78
.125
3/8
7/16-24
9/16-24
9/16
1.46
.91
.188
2
62C-8-6
2
62C-10-6
3/8
1/2
9/16-24
11/16-20
11/16
1.71 1.03
.312
3/8
5/8
9/16-24
13/16-18
13/16
1.82 1.13
.312
Bulkhead Unions
UZ
PART
NO.
35159
35160
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
2
62CBH-4
1/4
2
62CBH-6
3/8
C
HEX
L
M
FLOW
DIA. D
7/16-24
9/16
2.29
1.75
.188
9/16-24
11/16
2.42
1.88
.312
Brass Inserts
(For industrial grade plastic tubing)
UZ
PART
NO.
31800
31801
31802
31803
31804
31805
31806
31807
31808
31809
31810
704
PK.
PARKER
PART
NO.
25
TUBE
O.D.
TUBE
WALL
63PT-2-16
1/8
.016
.46
.080
25
63PT-2-23
1/8
.023
.45
.073
25
63PT-2-32
1/8
.032
.31
.061
25
63PT-3-25
3/16
.025
.45
.135
25
63PT-3-40
3/16
.040
.52
.095
L
O.D.
25
63PT-4-40
1/4
.040
.50
.163
25
63PT-5-40
5/16
.040
.50
.232
25
63PT-5-62
5/16
.062
.53
.187
25
63PT-6-62
3/8
.062
.56
.250
10
63PT-8-62
1/2
.062
.72
.370
10
63PT-10-62
5/8
.062
.72
.483
Female Connectors
Ref. SAE 060103 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
31540 5
66C-2-2
31541
35161
31542
31543
31544
31545
31546
31547
31548
31549
32030
31550
31551
31552
31553
TUBE
SIZE
1/8
PIPE
THREAD
1/8
1/8
STRAIGHT
THREAD
5/16-24
C
HEX
9/16
L
.95
M
.75
FLOW
DIA. D
.094
3/8-24
9/16
1.02
.78
.125
5
66C-3-2
3/16
5
66C-3-4
3/16
1/4
3/8-24
11/16
1.20
.96
.125
5
66C-4-2
1/4
1/8
7/16-24
9/16
1.02
.78
.188
5
66C-4-4
1/4
1/4
7/16-24
11/16
1.24
1.00
.188
5
66C-5-2
5/16
1/8
1/2-24
9/16
1.07
.81
.250
5
66C-5-4
5/16
1/4
1/2-24
11/16
1.29
1.03
.250
5
66C-6-2
3/8
1/8
9/16-24
9/16
1.06
.78
.312
5
66C-6-4
3/8
1/4
9/16-24
11/16
1.34
1.06
.312
5
66C-6-6
3/8
3/8
9/16-24
13/16
1.34
1.06
.312
5
66C-6-8
3/8
1/2
9/16-24
1
1.54
1.27
.312
5
66C-7-6
7/16
3/8
5/8-24
13/16
1.43
1.09
.312
2
66C-8-4
1/2
1/4
11/16-20
11/16
1.49
1.09
.406
2
66C-8-6
1/2
3/8
11/16-20
13/16
1.52
1.12
.406
2
66C-8-8
1/2
1/2
11/16-20
1
1.71
1.31
.406
2
66C-10-8 5/8
1/2
13/16-18
1
1.80
1.38
.500
Male Connectors
31555
35162
31556
31557
31558
35163
31559
31560
31561
31562
31563
31564
35164
31565
31566
31567
31568
31569
31570
35165
35166
35167
TUBE
SIZE
1/8
PIPE
THREAD
1/8
STRAIGHT
THREAD
5/16-24
C
HEX
7/16
L
.97
M
.77
FLOW
DIA. D
.094
3/8-24
7/16
1.08
.84
.125
5
68C-3-2
3/16
1/8
5
68C-3-4
3/16
1/4
3/8-24
9/16
1.27
1.03
.125
5
68C-4-2
1/4
1/8
7/16-24
7/16
1.10
.86
.188
5
68C-4-4
1/4
1/4
7/16-24
9/16
1.30
1.06
.188
5
68C-4-6
1/4
3/8
7/16-24
11/16
1.27
1.03
.188
5
68C-4-8
1/4
1/2
7/16-24
7/8
1.55
1.31
.188
5
68C-5-2
5/16
1/8
1/2-24
1/2
1.15
.89
.234
5
68C-5-4
5/16
1/4
1/2-24
9/16
1.33
1.07
.250
5
68C-6-2
3/8
1/8
9/16-24
9/16
1.25
.97
.250
5
68C-6-4
3/8
1/4
9/16-24
9/16
1.42
1.14
.312
5
68C-6-6
3/8
3/8
9/16-24
11/16
1.44
1.16
.312
5
68C-6-8
3/8
1/2
9/16-24
7/8
1.53
1.25
.312
5
68C-7-4
7/16
1/4
5/8-24
5/8
1.50
1.17
.312
2
68C-8-4
1/2
1/4
11/16-20
11/16
1.62
1.22
.312
2
68C-8-6
1/2
3/8
11/16-20
11/16
1.60
1.20
.406
2
68C-8-8
1/2
1/2
11/16-20
7/8
1.71
1.31
.406
2
68C-10-6
5/8
3/8
13/16-18
13/16
1.73
1.31
.406
2
68C-10-8
5/8
1/2
13/16-18
7/8
1.90
1.48
.500
2
68C-10-12
5/8
3/4
13/16-18
1-1/16
1.98
1.56
.500
2
68C-12-8
3/4
1/2
1/18
1
2.05
1.60
.562
2
68C-12-12
3/4
3/4
1/18
1-1/16
2.08
1.63
.656
2
68C-14-12
7/8
3/4
1-1/8-18
1-1/8
1.76
1.41
.750
Ref. SAE 060102 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
31554
5
68C-2-2
705
Union Tees
Ref. SAE 060401 BA
UZ
PART
NO.
31571
31572
35113
31573
31574
31575
31576
31577
PK.
PARKER
PART
NO.
5
164C-2
5
264C-3
5
164C-4
5
264C-4
5
164C-5
5/16
5
164C-6
3/8
2
164C-8
1/2
11/16-20
2
164C-10
5/8
13/16-18
L1
L2
L3
M1
M2
M3
FLOW
DIA. D
TUBE
SIZE
STRAIGHT
THREAD
L
M
FLOW
DIA. D
1/8
5/16-24
.82
.61
.094
3/16
3/8-24
.84
.60
.125
1/4
7/16-24
.86
.61
.188
1/4
7/16-24
.84
.60
.188
1/2-24
.98
.71
.250
9/16-24
1.03
.74
.312
1.34
.93
.406
1.54
1.08
.500
Union Tee Reducers
Ref. SAE 060401 BA
UZ
PART
NO.
35169
35170
35171
PK.
PARKER
PART
NO.
1
2
3
TUBE TUBE TUBE
SIZE SIZE SIZE
2
164C-6-4-4 3/8
1/4
1/4
1.03
.96
.96
.75
.72
.72
.188
2
164C-6-6-4 3/8
3/8
1/4
1.03
.96
.96
.75
.75
.72
.188
2
164C-8-8-6 1/2
1/2
3/8
1.34 1.16 1.16
.94
.94
.88
.312
Union Elbows
Ref. SAE 060201BA
UZ
PART
NO.
31578
31579
31580
31581
31582
32033
31583
31584
PK.
PARKER
PART
TUBE
NO.
SIZE
STRAIGHT
THREAD
L
5
165C-2
1/8
5/16-24
.82
.61
.094
5
165C-3
3/16
3/8-24
.87
.61
.125
5
165C-4
1/4
7/16-24
.88
.61
.188
5
165C-5
5/16
1/2-24
.95
.71
.250
5
165C-6
3/8
9/16-24
1.03
.74
.312
5
165C-7
7/16
5/3-24
1.16
.82
.312
2
165C-8
1/2
11/16-20
1.34
.93
.406
2
165C-10
5/8
13/16-18
1.48
1.05
.500
M
FLOW
DIA. D
Compression Gage Tee
706
UZ
PART
NO.
PK.
PARKER
PART
NO.
35173
5
168C-4-2 1/4
TUBE
SIZE
PIPE
THREAD
1/8
STRAIGHT
THREAD
7/16-24
L
M
N
N1
FLOW
DIA. D
.96
.72
1.41
.56
.188
Male Elbows
Ref. SAE 060202 BA
UZ
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
5
269C-2-2
1/8
1/8
5/16-24
.80
.60
.67
.094
5
269C-3-2
3/16
1/8
3/8-24
.84
.60
.67
.125
5
169C-3-4
3/16
1/4
3/8-24
.86
.64
.93
.125
5
269C-4-2
1/4
1/8
7/16-24
.84
.60
.73
.188
5
269C-4-4
1/4
1/4
7/16-24
.84
.60
.79
.188
5
169C-4-6
1/4
3/8
7/16-24
.93
.68
1.00
.188
5
269C-5-2
5/16
1/8
1/2-24
.86
.60
.73
.250
5
269C-5-4
5/16
1/4
1/2-24
.93
.67
.82
.250
5
169C-5-6
5/16
3/8
1/2-24
1.01
.75
1.00
.250
5
269C-6-2
3/8
1/8
9/16-24
.97
.69
.69
.234
5
269C-6-4
3/8
1/4
9/16-24
1.01
.73
.92
.312
5
269C-6-6
3/8
3/8
9/16-24
1.12
.84
.97
.312
5
169C-6-8
3/8
1/2
9/16-24
1.22
.94
1.27
.312
5
269C-7-6
7/16
3/8
5/8-24
1.16
.82
.98
.312
2
169C-8-4
1/2
1/4
11/16-20 1.34
.94
1.00
.312
2
169C-8-6
1/2
3/8
11/16-20 1.34
.93
1.11
.406
2
169C-8-8
1/2
1/2
11/16-20 1.48
1.06
1.15
.406
2
169C-10-8
5/8
1/2
13/16-18 1.48
2
—
5/8
3/8
—
169C-12-8 3/4
169C-12-12 3/4
1/2
3/4
2
2
FLOW
DIA. D
1.06
1.31
.500
—
—
—
—
1-18
1-18
1.64
1.70
1.18
1.27
1.49
1.58
.562
.562
31585
31586
35174
31587
31588
31589
31590
31591
31592
31593
31594
31595
31596
32034
31597
31598
31599
31601
32035
35176
35177
PK.
PARKER
PART
NO.
Female Elbows
Ref. SAE 060203 BA
UZ
PART
NO.
31603
32036
31604
32037
31605
31606
31607
32038
31608
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
5
170C-2-2
1/8
1/8
5/16-24
.89
.69
.56
.094
5
170C-3-2
3/16
1/8
3/8-24
.98
.73
.56
.125
5
170C-4-2
1/4
1/8
7/16-24
.93
.69
.56
.188
5
270C-4-2
1/4
1/8
7/16-24
.91
.67
.54
.188
5
170C-4-4
1/4
1/4
7/16-24
1.02
.78
.70
.188
5
170C-6-4
3/8
1/4
9/16-24
1.06
.79
.73
.312
5
170C-6-6
3/8
3/8
9/16-24
1.22
.94
.69
.312
5
170C-7-4
7/16
1/4
5/8-24
1.27
.93
.73
.312
2
170C-8-6
1/2
3/8
11/16-20 1.34
1.00
.69
.406
FLOW
DIA. D
707
Male Run Tees
UZ
PART
NO.
35178
35179
35180
35181
35182
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
2
171C-2-2
1/8
1/8
5/16-24
.82
.61
.71
.094
2
171C-3-2
3/16
1/8
3/8-24
.86
.61
.71
.125
2
171C-4-2
1/4
1/8
7/16-24
.90
.64
.75
.188
2
171C-4-4
1/4
1/4
7/16-24
.93
.69
.92
.188
2
171C-6-4
3/8
1/4
9/16-24
1.09
.81
1.03
.312
FLOW
DIA. D
Male Branch Tees
Ref. SAE 060425 BA
UZ
PART
NO.
35183
35184
35185
35186
35187
35188
35189
35190
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
5
172C-2-2
1/8
1/8
5/16-24
.82
.61
.71
.094
5
172C-3-2
3/16
1/8
3/8-24
.86
.61
.71
.125
5
172C-4-2
1/4
1/8
7/16-24
.86
.61
.74
.188
5
172C-4-4
1/4
1/4
7/16-24
.93
.69
.92
.188
5
172C-6-2
3/8
1/8
9/16-24
1.03
.75
.75
.234
5
172C-6-4
3/8
1/4
9/16-24
1.09
.77
1.03
.312
5
172C-6-6
3/8
3/8
9/16-24
1.09
.81
1.00
.312
2
172C-8-6
1/2
3/8
11/16-20 1.34
.93
1.10
.406
FLOW
DIA. D
Female Branch Tee
UZ
PART
NO.
35192
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
5
177C-4-2
1/4
1/8
7/16-24
.86
.63
.53
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
5
179C-4-2
1/4
1/8
7/16-24
.90
.66
.56
.188
5
179C-4-4
1/4
1/4
7/16-24
.80
.56
.84
.188
5
179C-6-2
3/8
1/8
9/16-24
.90
.63
.65
.234
5
179C-6-4
3/8
1/4
9/16-24
.90
.63
.84
.312
5
179C-6-6
3/8
3/8
9/16-24
.97
.75
.95
.312
2
179C-8-6
1/2
3/8
11/16-24 1.15
.81
.95
.406
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
M
1/4
7/16-24
7/16
.74
.50
FLOW
DIA. D
.188
45° Elbows
Compression to male pipe
UZ
PART
NO.
35193
35194
35195
35196
35197
35198
FLOW
DIA. D
Seal Plug
708
UZ
PART
NO.
PK.
PARKER
PART
NO.
35199
5
639C-4
Brass Poly-Tite® Fittings
Advantages
A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled,
ready for installation. An exclusive acetal copolymer sleeve holds plastic tubing where it belongs, even when the system pressure exceeds the tubing burst point. Poly-Tite sleeves have superior resilience to resist creeping and stress caused from compression. The black acetal copolymer sleeve also resists ultra-violet ray attack and has excellent dimensional stability. Poly-Tite
nuts will rotate around the sleeve as it tightens to prevent twisting and weakening of the plastic tubing. Fittings can be assembled and disassembled repeatedly.
Materials
Bodies and Nuts: CA377, CA360, CA345
Plastic Sleeves: Acetal Copolymer.
Applications
Use with thermoplastic tubing for pneumatic instrumentation
circuits, lubricant and coolant lines, and applications with other
gases and liquids. For use with soft metal tubing and nylon
thermoplastic tubing, use brass sleeve and nut assembly.
Up to 150 PSI from 0° to +150°F with thermoplastic tubing. Up to
300 PSI from 0° to +175°F with soft metal tubing.
describes the size.
EXAMPLE:
66
Female Connector
(Tube to female pipe)
Poly-Tite
1/4" (4/16) Tube O.D.
P
-4
-2
Sizes
Working Pressure and
Temperature Ranges
Nomenclature
the tube O.D.
Polyethylene, polypropylene and vinyl tubing:
Insert tube end until it bottoms in the Poly-Tite fitting and tighten
knurl/hex nut finger-tight – no tools needed. Wrench tightening on
tubing will provide maximum working pressure (one wrench turn
after finger-tight).
Copper, aluminum and nylon tubing:
Brass sleeves are recommended. Insert tube until it bottoms in the
Poly-Tite fitting and tighten one wrench turn past finger-tight.
Maximum allowable metal tube wall
thickness for use with Poly-Tite fittings:
1/8", 3/16" O.D. – no limitation, 1/4" O.D. - .035 5/16", 3/8", 1/2"
O.D. - .049
709
Acetal Plastic Sleeves
UZ
PART
NO.
221398
31954
31955
31956
31957
PK.
PARKER
PART
NO.
25
—
TUBE
SIZE
A
D
L
1/8
—
—
—
25
60P-4
1/4
.334
.261
.338
25
60P-5
5/16
.405
.321
.340
25
60P-6
3/8
.465
.381
.367
25
60P-8
1/2
.628
.514
.399
Nut and Plastic Sleeve Assemblies
UZ
PART
NO.
221408
32039
31950
31951
31952
31953
PK.
PARKER
PART
NO.
5
5
5
61P-4
5
61P-5
5
61P-6
5
61P-8
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
61P-2*
1/8
5/16-24
3/8
.130
.34
61P-3*
3/16
3/8-24
7/16
.192
.37
1/4
3/8-24
7/16
.261
.38
5/16
7/16-24
1/2
.321
.34
3/8
1/2-24
9/16
.380
.38
1/2
11/16-20
3/4
.514
.44
D
L
*Brass Sleeve
Unions
UZ
PART
NO.
221418
32040
31991
31992
31993
31994
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
M
5
62P-2*
1/8
5/16-24
5/16
1.08
.64
.094
2
62P-3*
3/16
3/8-24
3/8
1.16
.73
.125
2
62P-4
1/4
3/8-24
3/8
1.17
.96
.125
2
62P-5
5/16
7/16-24
7/16
1.16
.96
.144
2
62P-6
3/8
1/2-24
1/2
1.23
.99
.204
2
62P-8
1/2
11/16-20
11/16
1.47
1.24
.323
FLOW
DIA. D
*Brass Sleeve, No Tube Support
Female Connectors
UZ
PART
NO.
32041
32042
32043
31968
31969
31970
31971
31972
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
C
HEX
L
M
FLOW
DIA. D
5
66P-2-2*
1/8
1/8
5/16-24
9/16
.97
.75
.094
5
66P-3-2*
3/16
1/8
3/8-24
9/16
1.00
.78
.125
5
66P-3-4*
3/16
1/4
3/8-24
11/16
1.18
.96
.125
5
66P-4-2
1/4
1/8
3/8-24
1/2
.97
.86
.125
5
66P-4-4
1/4
1/4
3/8-24
5/8
1.18
1.07
.125
5
66P-5-2
5/16
1/8
7/16-24
1/2
.97
.86
.144
5
66P-6-4
3/8
1/4
1/2-24
5/8
1.18
1.07
.204
2
66P-8-6
1/2
3/8
11/16-20
13/16
1.31
1.20
.323
710
Male Connectors
UZ
PART
NO.
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
C
HEX
L
5
68P-2-1*
1/8
1/16
5/16-24
11/32
5
68P-2-10X32* 1/8
10-32
5/16-24
5
68P-2-2*
1/8
1/8
5/16-24
5
68P-3-2*
3/16
1/8
3/8-24
7/16
1.06
.84
.125
5
68P-3-4*
3/16
1/4
3/8-24
9/16
1.25
1.03
.125
5
68P-4-1
1/4
1/16
3/8-24
3/8
1.06
.95
.125
5
68P-4-10X32 1/4
10-32
3/8-24
3/8
.86
.75
.094
5
68P-4-2
1/4
1/8
3/8-24
7/16
1.06
.95
.125
5
68P-4-4
1/4
1/4
3/8-24
9/16
1.25
1.14
.125
5
68P-4-6
1/4
3/8
3/8-24
11/16
1.28
1.17
.125
5
68P-5-2
5/16
1/8
7/16-24
7/16
1.05
.95
.144
5
68P-5-4
5/16
1/4
7/16-24
9/16
1.24
1.14
.144
5
68P-6-2
3/8
1/8
1/2-24
1/2
1.10
.98
.204
5
68P-6-4
3/8
1/4
1/2-24
9/16
1.29
1.17
.204
5
68P-6-6
3/8
3/8
1/2-24
11/16
1.29
1.17
.204
2
68P-8-4
1/2
1/4
—
—
2
68P-8-6
1/2
3/8
11/16-20
11/16
221436
32044
221437
32045
32047
32048
32049
31973
31974
221441
31975
31976
31978
31977
31979
221447
31980
M
FLOW
DIA. D
1.00
.78
.094
3/8
.86
.64
.094
7/16
.99
.77
.094
—
—
—
1.37
1.29
.323
Union Tees
32050
32051
31995
31996
31997
31998
PK.
PARKER
PART
NO.
2
2
2
164P-4
2
164P-5
2
164P-6
3/8
TUBE
SIZE
STRAIGHT
THREAD
164P-2*
1/8
5/16-24
.83
.61
.094
264P-3*
3/16
3/8-24
.83
.61
.125
1/4
3/8-24
.84
.73
.125
5/16
7/16-24
.83
.73
.144
2
164P-8
1/2
L
FLOW
DIA. D
M
1/2-24
.98
.86
.203
11/16-20
1.12
1.04
.323
UZ
PART
NO.
Male Elbows
UZ
PART
NO.
PK.
PARKER
PART
NO.
5
269P-2-2*
5
169P-3-2*
5
169P-3-4*
3/16
5
169P-4-2
1/4
5
169P-4-4
5
169P-4-6
5
5
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
1/8
1/8
5/16-24
.83
.61
.67
.094
3/16
1/8
3/8-24
.83
.61
.69
.125
1/4
3/8-24
.85
.63
.94
.125
1/8
3/8-24
.84
.73
.75
.125
1/4
1/4
3/8-24
.90
.79
.92
.125
1/4
3/8
3/8-24
.93
.82
1.08
.125
169P-5-2
5/16
1/8
7/16-24
.87
.77
.72
.144
169P-6-2
3/8
1/8
1/2-24
.91
.79
.73
.203
5
169P-6-4
3/8
1/4
1/2-24
.98
.86
1.05
.203
5
169P-6-6
3/8
3/8
1/2-24
.98
.86
1.08
.203
2
—
1/2
1/4
—
2
169P-8-6
1/2
3/8
11/16-20
32052
32053
32054
31984
31985
221460
31986
31988
31987
31989
221465
31990
TUBE
SIZE
—
—
—
—
1.12
1.04
1.13
.323
711
Female Elbows
UZ
PART
NO.
32055
32056
31981
221470
31982
31983
PK.
PARKER
PART
NO.
5
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
170P-2-2*
1/8
1/8
5/16-24
.91
.69
.56
.094
5
170P-3-2*
3/16
1/8
3/8-24
.91
.69
.56
.125
5
170P-4-2
1/4
1/8
3/8-24
.90
.79
.56
.125
5
170P-4-4
1/4
1/4
3/8-24
1.00
.89
.69
.125
5
170P-6-4
3/8
1/4
1/2-24
1.01
.89
.69
.204
2
170P-8-6
1/2
3/8
11/16-20
1.19
1.11
1.13
.323
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
Male Run Tees
UZ
PART
NO.
32057
32058
31958
31959
31960
31961
31962
PK.
PARKER
PART
NO.
5
171P-2-2*
1/8
1/8
5/16-24
.83
.61
.71
.094
5
171P-3-2*
3/16
1/8
3/8-24
.83
.61
.71
.125
5
171P-4-2
1/4
1/8
3/8-24
.84
.73
.72
.125
5
171P-4-4
1/4
1/4
3/8-24
.92
.81
.92
.125
5
171P-5-2
5/16
1/8
7/16-24
.83
.73
.72
.144
5
171P-6-4
3/8
1/4
1/2-24
.98
.86
1.03
.203
2
171P-8-6
1/2
3/8
11/16-20
1.12
1.04
1.13
.323
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
Male Branch Tees
UZ
PART
NO.
32059
32060
31963
31964
31965
31966
31967
PK.
PARKER
PART
NO.
5
172P-2-2*
1/8
1/8
5/16-24
.83
.61
.71
.094
5
172P-3-2*
3/16
1/8
3/8-24
.83
.61
.71
.125
5
172P-4-2
1/4
1/8
3/8-24
.84
.73
.72
.125
5
172P-4-4
1/4
1/4
3/8-24
.92
.81
.92
.125
5
172P-5-2
5/16
1/8
7/16-24
.83
.73
.72
.144
5
172P-6-4
3/8
1/4
1/2-24
.98
.86
1.03
.203
2
172P-8-6
1/2
3/8
11/16-20
1.12
1.04
1.13
.323
712
Brass Insta-Lok Fittings
Advantages
Ready-to-use compact one-piece fitting for use with most thermoplastic and soft metal tubing. This fitting is specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important. No special tools are needed for assembly; just insert the tubing until it bottoms. Insta-Lok is designed to be used with no tube support. Radial claws on the stainless steel grab ring grip
the tubing securely to provide retention. Swivels are featured on all male pipe threaded shapes for installation in tight places and for precise
positioning. Insta-Lok should not be used for live swivel applications. The outside diameter of the tubing to be used with the
fitting is marked on the release buttton. The removable release button can be color coded for ease of identification. Standard release buttton
is green.
Materials
Bodies: CA377, CA360, CA345
O-Ring: Nitrile
Release Button: Polyacetal
Grab Ring: Stainless Steel
Applications
Use with polyethylene, nylon, polyurethane or soft metal
tubing. All applications should be carefully tested through the
range of conditions which may be encountered prior to use.
Zero to 200°F at up to 300PSI depending on tubing being used.
Vacuum applications are dependent upon temperature and type
of tubing used.
1. Cut thermoplastic tubing squarely. Metal tubing should be cut
squarely and free of burrs. Be certain the port or mating part
is clean and free of debris.
2. Insert tubing into fitting until it bottoms. A slight twisting
motion will ease the insertion. Pull on tubing to verify it is
properly retained in the fitting.
3. To disassemble, simply push the release button against the
body and remove the tubing.
Nomenclature
Working Pressure and
TemperatureRanges
and size of the fitting. The first series of numbers and letters identify
the style and type fitting. The second series of numbers describe
the size.
EXAMPLE:
Male Connector
Insta-Lok
1/4" (4/16) Tube O.D.
68
PL
-4
-2
Sizes
the tube O.D.
Available in
an Assortment
PART # 00541
Found on Page 665
PART # 102673
Found on Page 665
PART # 102674
Found on Page 665
PART # 102675
Found on Page 666
PART # 102676
Found on Page 666
713
Unions
UZ
PART
NO.
31811
32061
31812
31813
31872
31814
31815
PK.
PARKER
PART
NO.
5
62PLP-2
1/8
5
62PLP-3
3/16
5
62PLP-5/32
5
62PLP-4
2
2
2
TUBE
SIZE
O.D.
L
D
.406
1.44
.094
.437
1.35
.156
5/32
.406
1.44
.125
1/4
.500
1.51
.188
62PLP-5
5/16
.562
1.68
.250
62PLP-6
3/8
.625
1.68
.312
62PLP-8
1/2
.750
1.90
.375
Bulkhead Unions
UZ
PART
NO.
31816
31817
31818
31873
31819
31820
PK.
PARKER
PART
NO.
TUBE
SIZE
C
HEX
B
P
MAX.
L
5
62PLPBH-2
1/8
7/16
9/16
.39
1.44
.094
5
62PLPBH-5/32 5/32
7/16
9/16
.39
1.44
.125
5
62PLPBH-4
1/4
9/16
11/16
.29
1.51
.188
2
62PLPBH-5
5/16
5/8
3/4
.60
1.68
.250
2
62PLPBH-6
3/8
3/4
7/8
.54
1.68
.312
2
62PLPBH-8
1/2
7/8
1
.66
1.90
.375
Female Connectors
UZ
PART
NO.
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
(NPTF)
L
31900
5
66PLP-2-2
1/8
1/8
1.18
.094
31909
31901
31902
31903
31904
31905
31906
31907
31908
5
66PLP-3-2
3/16
1/8
1.16
.156
5
66PLP-5/32-2 5/32
1/8
1.18
.125
5
5
66PLP-5/32-4 5/32
66PLP-4-2
1/4
1/4
1/8
1.39
1.21
.125
.188
5
66PLP-4-4
1/4
1/4
1.42
.188
2
66PLP-5-2
5/16
1/8
1.27
.250
2
66PLP-5-4
5/16
1/4
1.47
.250
2
66PLP-6-4
3/8
1/4
1.46
.312
2
66PLP-6-6
3/8
3/8
1.51
.312
714
D
D
Tube End Reducers
Plastic Body
UZ
PART
NO.
31910
31911
31912
31913
31914
31915
31916
31917
31918
31919
PK.
PARKER
PART
NO.
1
TUBE
SIZE
2
TUBE
SIZE
L
D
5
67PPL-2-5/32
1/8
5/32
1.48
.078
5
67PPL-2-4
1/8
1/4
1.48
.078
5
67PPL-5/32-4*
5/32
1/4
1.48
.118
5
67PPL-5/32-5*
5/32
5/16
1.41
.118
5
67PPL-5/32-6*
5/32
3/8
1.63
.118
5
67PPL-4-5
1/4
5/16
1.52
.177
5
67PPL-4-6
1/4
3/8
1.64
.177
5
67PPL-4-8
1/4
1/2
1.72
.177
2
67PPL-5-6*
5/16
3/8
1.79
.236
1.92
.295
2
67PPL-6-8
3/8
1/2
*Part supplied with black bodies and black release buttons
Male Connectors
UZ
PART
NO.
TUBE
SIZE
PIPE
THREAD
C
(NPTF) HEX
5
W68PLP-2-1
1/8
1/16
3/8
5
W68PLP-2-2
1/8
1/8
7/16
.85
.47
.094
5
W68PLP-2-4
1/8
1/4
9/16
1.10
.54
.094
5
W68PLP-3-2
3/16
1/8
7/16
.92
.54
.156
5
W68PLP-3-4
3/16
1/4
9/16
1.10
.54
.156
5
W68PLP-2-10X32
1/8
10-32
3/8
.93
.77
.094
5
W68PLP-5/32-2
5/32
1/8
7/16
.85
.47
.125
5
W68PLP-5/32-4
5/32
1/4
9/16
1.10
.54
.125
5
W68PLP-5/32-10X32 5/32
10-32
13/32
.95
.79
.094
5
W68PLP-4-1
1/4
1/16
1/2
1.15
.77
.140
5
W68PLP-4-2
1/4
1/8
1/2
.98
.58
.188
L
M
.85
.47
D
.094
5
W68PLP-4-4
1/4
1/4
9/16
1.10
.54
.188
5
W68PLP-4-6
1/4
3/8
3/4
1.14
.58
.188
5
W68PLP-4-10X32
1/4
10-32
1/2
1.01
.87
.094
2
W68PLP-5-2
5/16
1/8
9/16
1.24
.86
.234
2
W68PLP-5-4
5/16
1/4
9/16
1.12
.56
.250
2
W68PLP-5-6
5/16
3/8
11/16
1.12
.56
.250
2
W68PLP-6-2
3/8
1/8
5/8
1.25
.87
.234
2
W68PLP-6-4
3/8
1/4
5/8
1.14
.58
.312
2
W68PLP-6-6
3/8
3/8
11/16
1.08
.52
.312
2
W68PLP-6-8
3/8
1/2
7/8
1.34
.59
.312
2
W68PLP-8-4
1/2
1/4
13/16
1.54
.98
.344
2
W68PLP-8-6
1/2
3/8
13/16
1.26
.70
.375
2
W68PLP-8-8
1/2
1/2
7/8
1.45
.70
.375
31821
31822
32062
32063
32064
31833
31823
31824
31834
31825
31826
31827
31828
31835
31874
31875
32065
31829
31830
31831
32066
32067
31832
32068
PK.
PARKER
PART
NO.
715
Union Tees
UZ
PART
NO.
31836
32069
31837
31838
31876
31839
31840
PK.
PARKER
PART
NO.
TUBE
SIZE
L
5
164PLP-2
1/8
.78
5
164PLP-3
3/16
.78
.156
5
164PLP-5/32 5/32
.80
.125
5
164PLP-4
1/4
.96
.188
2
164PLP-5
5/16
.99
.250
2
164PLP-6
3/8
1.04
.312
2
164PLP-8
1/2
1.19
.375
PK.
PARKER
PART
NO.
TUBE
SIZE
L
5
165PLP-2
1/8
.78
.094
5
165PLP-5/32 5/32
.80
.125
5
165PLP-4
1/4
.83
.188
2
165PLP-5
5/16
.99
.250
D
.094
Union Elbows
UZ
PART
NO.
31920
31921
31922
31923
31924
31925
D
2
165PLP-6
3/8
1.04
.312
2
165PLP-8
1/2
1.19
.375
Male Elbow Swivels 90°
UZ
PART
NO.
31841
31850
32070
32071
31842
31843
31851
31844
31845
32072
31852
31877
31878
31846
31847
31848
32073
32074
31849
32075
716
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
(NPTF)
C
HEX
L
N
5
W169PLP-2-2
1/8
1/8
7/16
.78
1.22
.078
5
W169PLP-2-10X32
1/8
10-32
3/8
.78
1.03
.078
5
W169PLP-2-4
1/8
1/4
9/16
.78
1.40
.078
5
W169PLP-3-2
3/16
1/8
7/16
.78
1.17
.156
5
W169PLP-5/32-2
5/32
1/8
7/16
.80
1.24
.109
5
W169PLP-5/32-4
5/32
5
W169PLP-5/32-10X32 5/32
5
W169PLP-4-2
5
W169PLP-4-4
5
W169PLP-4-6
1/4
3/8
5
W169PLP-4-10X32
1/4
10-32
2
W169PLP-5-2
5/16
1/8
2
W169PLP-5-4
5/16
1/4
2
W169PLP-6-2
3/8
1/8
2
W169PLP-6-4
3/8
1/4
2
W169PLP-6-6
3/8
3/8
2
W169PLP-6-8
3/8
1/2
2
W169PLP-8-4
1/2
1/4
2
W169PLP-8-6
1/2
3/8
3/4
1.19
2
W169PLP-8-8
1/2
1/2
7/8
1.19
D
1/4
9/16
.80
1.42
.109
10-32
3/8
.80
1.05
.078
1/4
1/8
7/16
.83
1.14
.188
1/4
1/4
9/16
.83
1.32
.188
3/4
.83
1.36
.188
7/16
.96
.94
.078
1/2
.99
1.42
.234
9/16
.99
1.60
.234
9/16
1.04
1.48
.234
9/16
1.04
1.66
.297
11/16 1.04
1.70
.297
1.04
1.89
.297
11/16 1.19
1.75
.344
1.79
.375
1.98
.375
7/8
Male Run Tee Swivels
UZ
PART
NO.
31853
31854
31855
31856
31879
31880
31857
32076
31858
32077
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
(NPTF)
C
HEX
L
N
5
W171PLP-2-2
1/8
1/8
7/16
.78
1.22
.078
5
W171PLP-5/32-2 5/32
1/8
7/16
.80
1.24
.109
5
W171PLP-4-2
1/4
1/8
7/16
.96
1.26
.188
5
W171PLP-4-4
1/4
1/4
9/16
.96
1.44
.188
2
W171PLP-5-2
5/16
1/8
1/2
.99
1.42
.234
2
W171PLP-5-4
5/16
1/4
9/16
.99
1.60
.234
2
W171PLP-6-4
3/8
1/4
9/16
1.04
1.66
.297
2
W171PLP-6-6
3/8
3/8
11/16
1.04
1.70
.297
2
W171PLP-8-6
1/2
3/8
3/4
1.19
1.79
.375
2
W171PLP-8-8
1/2
1/2
7/8
1.19
1.98
.375
TUBE
SIZE
PIPE
THREAD
(NPTF)
C
HEX
L
N
D
Male Branch Tee Swivels
UZ
PART
NO.
PK.
PARKER
PART
NO.
5
W172PLP-2-2
1/8
1/8
7/16
.78
1.22
.078
5
W172PLP-3-2
3/16
1/8
7/16
.78
1.17
.156
5
W172PLP-5/32-2 5/32
1/8
7/16
.80
1.24
.109
5
W172PLP-4-2
1/4
1/8
7/16
.96
1.26
.188
5
W172PLP-4-4
1/4
1/4
9/16
.96
1.44
.188
2
W172PLP-5-2
5/16
1/8
1/2
.99
1.42
.234
2
W172PLP-5-4
5/16
1/4
9/16
.99
1.60
.234
2
W172PLP-6-4
3/8
1/4
9/16
1.04
1.66
.297
2
W172PLP-6-6
3/8
3/8
11/16
1.04
1.70
.297
2
W172PLP-8-6
1/2
3/8
3/4
1.19
1.79
.375
2
W172PLP-8-8
1/2
1/2
7/8
1.19
1.98
.375
UZ
PART
NO.
PK.
PARKER
PART
NO.
TUBE
SIZE
31865
5
639PLP-2
1/8
1.30
31866
31867
31883
31868
31869
5
639PLP-5/32
5/32
1.33
5
639PLP-4
1/4
1.34
2
639PLP-5
5/16
1.28
2
639PLP-6
3/8
1.50
2
639PLP-8
1/2
1.69
31859
32078
31860
31861
31862
31881
31882
31863
32079
31864
32080
D
Plugs
L
717
Industrial Push To Connect Fittings
Nylon LF3000 Push-to-Connect Fittings
Specifications for Nylon Push-To-Connect Fittings
(LF3000 System)
Fluids: Compressed air and vacuum
Body Material: Nylon 6.6 or Nickel Plated Brass
Seal: Nitrile
Pressure Rating: 28" Hg to 290 PSI
Temperature Rating: -4oF to 175oF
Tread Sizes: 10-32 to 1/2 and M5 to 1/2 (BSP)
Thread Types: NPT, BSPT, BSPP, UNF, Metric
Tube Sizes: 1/8" to 1/2" and 3mm to 14mm
Tubing Types: Nylon, Polyurethane,
Polyethylene, Teflon
Available in
an Assortment
PART #00476
Found on Page 666
Tube O.D.
1/8
5/32
5/32
5/32
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
Thread
10-32
10-32
1/8
1/4
10-32
M7
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/4
3/8
1/2
Tube O.D.
1/4
1/4
Male Connector Tube x Male NPT
10-32 UNF
Part No.
Vendor No.
QTY
3171 53 20
5
116758
3171 04 20
5
116757
3175 04 11
5
116761
3175 04 14
5
116762
3171 56 20
5
116759
3181 56 55
10
*116760
3175 56 11
5
116763
3175 56 14
5
116764
3175 56 18
5
116765
3175 60 11
5
116766
3175 60 14
5
116767
3175 60 18
5
116768
3175 60 22
5
116769
3175 62 14
5
116770
3175 62 18
2
116771
3175 62 22
2
116772
Thread/Tube O.D.
1/8
1/4
Part No.
*116872
*116873
* Denotes Non-Stock items
718
Male Elbow Tube x Male NPT
10-32 UNF
Part No.
Vendor No.
QTY
116780
116778
116779
3109 04 20
3109 04 11
3109 04 14
5
5
5
116781
116782
3109 56 11
3109 56 14
10
5
116783
116784
116785
116786
116787
116788
116789
3109 60 11
3109 60 14
3109 60 18
3109 60 22
3109 62 14
3109 62 18
3109 62 22
5
5
5
5
2
2
2
Single Banjo
Tube x NPT
Vendor No.
3018 56 11
3018 56 14
QTY
10
10
Extended Male Elbow
Tube x Male NPT
Part No.
Vendor No.
QTY
*116798
*116799
3129 56 11
3129 56 14
10
10
*116800
*116871
3129 60 14
3129 60 18
10
10
Part No.
Equal Cross
Tube x Tube
Vendor No.
*116915
3107 56 00
QTY
5
Tube O.D.
5/32
1/4
1/4
3/8
3/8
1/2
Thread
10-32
1/8
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/4
3/8
1/2
Male Branch Tee
Tube x Male NPT - 10-32 UNF
Part No.
Vendor No.
QTY
3108 04 20
5
116875
3108 04 11
10
*116874
3108 56 11
5
116876
3108 56 14
5
116877
3108 56 18
2
116878
3108 60 11
5
116879
3108 60 14
2
116880
3108 60 18
2
116881
3108 60 22
10
*116882
3108 62 14
5
116883
3108 62 18
10
*116884
3108 62 22
10
*116885
Female Elbow
Tube x NPT
Part No.
Vendor No.
QTY
116790
116791
116792
3009 56 11
3009 56 14
3009 60 14
5
10
5
116793
3009 62 18
5
Male Run Tee
Tube x Male NPT - 10-32 UNF
Part No.
Vendor No.
QTY
116889
116890
116891
*116892
116893
116894
116895
3103 04 11
3103 56 11
3103 56 14
3103 56 18
3103 60 11
3103 60 14
3103 60 18
5
5
5
10
5
5
5
116896
116897
3103 62 18
3103 62 22
2
2
45 Degree Male Elbow
Tube x Male NPT
Part No.
Vendor No.
QTY
*116794
*116795
*116796
116797
3113 56 11
3113 56 14
3113 60 14
3113 60 18
Female Branch Tee
Tube x NPT
Part No.
Vendor No.
10
10
10
10
Tube O.D.
5/32
5/32
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
Thread
1/8
1/8
1/4
1/4
3/8
3/8
Straight Female Conn.
Tube x NPT
Part No.
Vendor No.
QTY
3014 04 11
10
*116773
3014 56 11
10
*116774
3014 56 14
5
116775
3014 60 14
5
116776
3014 60 18
5
116777
QTY
*116886
*116887
3008 56 11
3008 56 14
10
10
*116888
3008 60 14
10
719
Tube O.D.
1/8
5/32
1/4
3/8
3/8
1/2
1/2
Tube O.D.
1/8
5/32
5/32
5/32
1/4
1/4
1/4
3/8
3/8
1/2
Tube O.D.
1/8
5/32
1/4
1/4
3/8
3/8
1/2
Tube O.D.
1/8
5/32
1/4
3/8
1/4
3/8
1/2
3/8
1/2
1/2
Tube O.D.
5/32
1/4
Union/Unequal Union
Tube x Tube
Part No.
Vendor No.
QTY
3106 53 00
5
116904
3106 04 00
5
116905
3106 56 00
5
116906
3106 60 56
10
*116908
3106 60 00
5
116907
116909
3106 62 00
2
Reducer
Tube x Tube
Vendor No.
QTY
116936
*116937
3166 04 56
3166 04 60
5
10
*116938
*116939
3166 56 60
3166 56 62
10
10
Part No.
*116940
Tube O.D.
5/32
1/4
3166 60 62
10
Part No.
*116920
*116935
720
Union Elbow/Unequal Elbow
Tube x Tube
Part No.
Vendor No.
QTY
116910
3102 53 00
5
116911
*116913
116912
3102 56 00
3102 60 56
3102 60 00
5
10
5
116914
3102 62 00
2
Part No.
Plug
Tube x Tube
Vendor No.
Tee/Unequal Tee
Tube x Tube x Tube
Part No.
Vendor No.
3104 53 00
116898
116899
*116901
116900
*116903
116902
QTY
3104 56 00
3104 60 56
3104 60 00
3104 62 60
3104 62 00
Bulkhead Union
Tube x Tube
Part No.
Vendor No.
*116916
3116 53 00
116917
3116 04 00
QTY
5
5
10
5
10
2
QTY
10
2
116941
3126 04 00
5
116942
3126 56 00
5
116918
3116 56 00
2
116943
3126 60 00
5
116919
3116 60 00
2
*116944
3126 62 00
10
Plug-In Elbow
Tube x Tube
Vendor No.
3182 04 00
3182 56 00
QTY
10
10
Nylon LF 3000 Push-to-Connect Fittings
Specifications for Nylon Push-to-Connect Fittings (LF3000 System)
Fuid: Compressed air and vacuum
Body Material: Nylon 6.6 or Nickel Plated Brass
Seal: Nitrile
Pressure Rating: 28” Hg to 290 PSI
Temperature Rating: -4oF to 175oF
Thread Sizes: 10-32 to 1/2 and M5 to 1/2 (BSP)
Tube Sizes: 1/8” to 1/2” and 3mm to 14mm
Tubing Sizes: Nylon, Polyurethane, Polyethylene, Teflon
Metric
Qty
10
10
10
10
10
10
10
10
10
10
10
120740
120741
120742
10
10
10
3175 12 17
3175 12 21
3175 14 17
Male Elbow
Metric Tube X Male BSPT
Part No.
Vendor No. Qty
120756
3109 04 10
10
120757
3109 04 13
10
120758
3109 06 10
10
120759
3109 06 13
10
120760
3109 06 17
10
120761
3109 08 10
10
120762
3109 08 13
10
120763
3109 08 17
10
120764
3109 10 13
10
120765
3109 10 17
10
120766
3109 10 21
10
120767
3109 12 13
10
120768
3109 12 17
10
120769
3109 12 21
10
Tube O.D. Male BSPT
4
1/8
4
1/4
6
1/8
6
1/4
6
3/8
8
1/8
8
1/4
8
3/8
10
1/4
10
3/8
10
1/2
12
1/4
12
3/8
12
1/2
14
3/8
Male Connector
Metric Tube X Male BSPT
Part No.
Vendor No.
120727
3175 04 10
120728
3175 04 13
120729
3175 06 10
120730
3175 06 13
120731
3175 06 17
120732
3175 08 10
120733
3175 08 13
120734
3175 08 17
120735
3175 10 13
120738
3175 10 17
120739
3175 10 21
Metric
Tube O.D.
4
4
4
6
6
6
6
8
8
8
10
10
10
Male BSPP
M5x0.8
1/8
1/4
M5x0.8
M12x1.5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
Male Connector With O-Ring Seal
Metric Tube X Male BSPP
Part No.
Vendor No. Qty
120743
3101 04 19 10
120744
3101 04 10 10
120745
3101 04 13 10
120746
3101 06 19 10
120747
3101 06 67 10
120748
3101 06 10 10
120749
3101 06 13 10
120750
3101 08 10 10
120751
3101 08 13 10
120752
3101 08 17 10
120753
3101 10 13 10
120754
3101 10 17 10
120755
3101 10 21 10
*Please Note All Metric Industrial Push To Connect Fittings Are Non-Stock
721
Metric
Tube O.D.
4
4
6
6
8
8
8
10
10
10
Male BSPT
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
Male Branch Tee
Metric Tube X Male BSPT X Tube
Part No.
Vendor No. Qty
120770
3108 04 10 10
120771
3108 04 13 10
120772
3108 06 10 10
120773
3108 06 13 10
120775
3108 08 10 10
120776
3108 08 13 10
120777
3108 08 17 10
120778
3108 10 13 10
120779
3108 10 17 10
120780
3108 10 21 10
Male Run Tee
Metric Tube X Tube X Male BSPT
Part No.
Vendor No.
Qty
120781
3103 04 10
10
120782
3103 04 13
10
120783
3103 06 10
10
120784
3103 06 13
10
120785
3103 08 10
10
120786
3103 08 13
10
120787
3103 08 17
10
120788
3103 10 13
10
120789
3103 10 17
10
120790
3103 10 21
10
Metric
Tube O.D
4
4
6
6
8
10
12
14
Tube O.D.
4
6
6
8
8
10
12
14
Union/Unequal Union
Metric Tube X Tube
Part No.
Vendor No.
120792
3106 04 00
120794
3106 04 06
120795
3106 06 00
120796
3106 06 08
120797
3106 08 00
120798
3106 10 00
120799
3106 12 00
120800
3106 14 00
Qty
10
10
10
10
10
10
10
10
Metric
Tube O.D.
6
8
10
12
Plug
Metric Tube
Part No.
Vendor No.
120816
3126 06 00
120818
3126 08 00
120813
3126 10 00
120815
3126 12 00
Qty
50
50
10
10
*Please Note All Metric Industrial Push To Connect Fittings Are Non-Stock
722
Union Elbow/Unequal Union Elbow
Metric Tube X Tube
Part No.
Vendor No.
Qty
120801
3102 04 00
10
120803
120806
120807
120808
120809
120811
3102 06 00
3102 06 08
3102 08 00
3102 10 00
3102 12 00
3102 14 00
10
10
10
10
10
10
Brass Air Brake - AB Fittings
AB Advantages
Easy to assemble, no flaring required. Extruded from CA 360 or CA 345 brass.
Specifications
AB fittings meet DOT FMVSS571.106 performance specifications
when assembled with 63NTA tube support and SAE J844 nylon
tubing. Meets functional requirements of SAE J246.
Applications
Use with copper tubing in air brake systems. Air Brake bodies (with
addition of NTA tube support) are interchangeable with NTA bodies
for use with SAE J844 nylon tubing.
Up to 400 PSI.
Temperature Ranges
Nomenclature
style and size of the fitting. The first series of numbers and letters
describes the size.
Example:
68
Male Connector
Air Brake Fitting
5/8" (10/16) Tube Size
AB
-10
-8
Sizes
Tube sizes are determined by the numbers of sixteenths of an inch
in the tube O.D.
Fittings will withstand variations from -65° to +250°F.
Assembly Instructions:
1. Cut tubing squarely and remove burrs.
2. Slide nut and sleeve onto tubing.
3. Insert tubing into fitting until bottomed on seat. The nut should
be screwed down finger-tight, then wrench-tightened as
indicated below (This will allow a number of remakes):
Tube
Size
1/4, 3/8, 1/2
5/8, 3/4
Additional Number of
Turns from Hand-Tight
2
3
723
Spherical Sleeves
Ref. SAE 120115
UZ
PART
NO.
31216
31217
31218
31219
31220
32081
PK.
PARKER
PART
NO.
TUBE
SIZE
A
D
L
25
60AB-4
1/4
.322
.255
.250
25
60AB-6
3/8
.461
.382
.310
25
60AB-8
1/2
.594
.507
.380
10
60AB-10
5/8
.734
.632
.440
10
60AB-12
3/4
.874
.758
.500
5
60AB-16
1
1.152
1.008
.626
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
D
L
10
61AB-4
1/4
7/16-24
9/16
.256
.75
10
61AB-6
3/8
17/32-24
5/8
.384
1.13
5
61AB-8
1/2
11/16-20
13/16
.509
1.25
5
61AB-10
5/8
13/16-18
15/16
.634
1.38
5
61AB-12
3/4
1-18
1-1/8
.760
1.56
5
61AB-16
1
1-1/4-16
1-3/8
1.010
1.69
Nuts
Ref. SAE 120111
UZ
PART
NO.
31221
31222
31223
31224
31225
32082
Unions
Ref. SAE 120101 BA
UZ
PART
NO.
31226
31227
31228
31229
31230
PK.
PARKER
PART
NO.
5
62AB-4
1/4
7/16-24
7/16
1.98
.83
.189
5
62AB-6
3/8
17/32-24
9/16
2.87
1.08
.314
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
L
M
FLOW
DIA. D
2
62AB-8
1/2
11/16-20
11/16
3.21
1.29
.405
2
62AB-10
5/8
13/16-18
13/16
3.59
1.41
.531
2
62AB-12
3/4
1-18
1
4.08
1.59
.656
STRAIGHT
THREAD
C
HEX
L
M
7/16-24
9/16
2.53
1.38
Bulkhead Unions
UZ
PART
NO.
31231
31232
31233
724
PK.
PARKER
PART
NO.
TUBE
SIZE
5
62ABH-4
1/4
5
62ABH-6
3/8
17/32-24
3/4
3.41
1.62
.314
2
62ABH-8
1/2
11/16-20
1
3.80
1.88
.408
FLOW
DIA. D
.188
Female Connector Couplings
Ref. SAE 120103 BA
UZ
PART
NO.
31234
31235
31236
31237
31238
31239
31240
31241
31242
PK.
PARKER
PART
NO.
5
66AB-4-2
1/4
1/8
7/16-24
9/16
1.42
.84
.188
5
66AB-4-4
1/4
1/4
7/16-24
11/16
1.65
1.07
.188
5
66AB-6-2
3/8
1/8
17/32-24
9/16
1.89
1.00
.314
5
66AB-6-4
3/8
1/4
17/32-24
11/16
2.07
1.18
.314
5
66AB-6-6
3/8
3/8
17/32-24
7/8
2.07
1.18
.314
2
66AB-8-6
1/2
3/8
11/16-20
7/8
2.23
1.27
.408
2
66AB-8-8
1/2
1/2
11/16-20
1-1/16
2.40
1.44
.408
2
66AB-10-6 5/8
3/8
13/16-18
7/8
2.40
1.31
.533
2
66AB-10-8 5/8
1/2
13/16-18
1-1/16
2.59
1.50
.533
L
M
TUBE
PIPE
SIZE THREAD
STRAIGHT
THREAD
C
HEX
L
M
FLOW
DIA. D
Male Connector Couplings
Ref. SAE 120102 BA
UZ
PART
NO.
5
68AB-4-2
1/4
1/8
7/16-24
7/16
1.47
.89
.189
5
68AB-4-4
1/4
1/4
7/16-24
9/16
1.68
1.10
.189
5
68AB-4-6
1/4
3/8
7/16-24
11/16
1.72
1.14
.189
5
68AB-6-2
3/8
1/8
17/32-24
9/16
1.92
1.03
.189
5
68AB-6-4
3/8
1/4
17/32-24
9/16
2.10
1.21
.314
5
68AB-6-6
3/8
3/8
17/32-24
11/16
2.13
1.24
.314
5
68AB-6-8
3/8
1/2
17/32-24
7/8
2.32
1.43
.314
2
68AB-8-4
1/2
1/4
11/16-20
11/16
2.29
1.33
.314
2
68AB-8-6
1/2
3/8
11/16-20
11/16
2.29
1.33
.408
2
68AB-8-8
1/2
1/2
11/16-20
7/8
2.48
1.52
.408
2
68AB-10-6
5/8
3/8
13/16-18
13/16
2.48
1.39
.408
2
68AB-10-8
5/8
1/2
13/16-18
7/8
2.67
1.58
.533
2
68AB-12-8
3/4
1/2
1-18
1
2.92
1.68
.533
2
68AB-12-12 3/4
3/4
1-18
1-1/8
2.95
1.71
.658
2
68AB-16-12
3/4
1-1/4-16
1-1/4
3.20
1.81
.750
TUBE
PIPE STRAIGHT
SIZE THREAD THREAD
1
C
HEX
FLOW
DIA. D
31243
31244
31245
31246
31247
31248
31249
31250
31251
31252
31253
31254
31255
31256
32083
PK.
PARKER
PART
NO.
Union Tees
Ref. SAE 120401 BA
UZ
PART
NO.
31257
31258
31259
31260
PK.
PARKER
PART
NO.
TUBE
SIZE
5
264AB-4
1/4
5
264AB-6
3/8
2
264AB-8
1/2
11/16-20
2
264AB-10
5/8
13/16-18
STRAIGHT
THREAD
FLOW
DIA. D
L
M
7/16-24
1.20
.62
.189
17/32-24
1.67
.78
.314
1.89
.93
.408
2.18
1.09
.533
725
Union Elbows
Ref. SAE 120201 BA
UZ
PART
NO.
31261
31262
31263
31264
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
5
265AB-4
1/4
7/16-24
5
265AB-6
3/8
17/32-24
1.68
.79
.314
2
265AB-8
1/2
11/16-20
1.89
.93
.408
2
265AB-10
5/8
13/16-18
2.18
1.09
.533
L
M
FLOW
DIA. D
1.20
.62
.189
Male Elbows
Ref. SAE 120202 BA
UZ
PART
NO.
31265
31266
31267
31268
31269
31270
31271
31272
31273
31274
31275
31276
31277
32084
PK.
PARKER
PART
NO.
5
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
269AB-4-2
1/4
1/8
7/16-24
1.20
.62
.66
.189
5
269AB-4-4
1/4
1/4
7/16-24
1.26
.68
.87
.189
5
269AB-4-6
1/4
3/8
7/16-24
1.31
.73
.86
.189
5
269AB-6-2
3/8
1/8
17/32-24
1.62
.73
.75
.189
5
269AB-6-4
3/8
1/4
17/32-24
1.68
.79
.92
.314
5
269AB-6-6
3/8
3/8
17/32-24
1.73
.84
.91
.314
5
269AB-6-8
3/8
1/2
17/32-24
1.83
.94
1.10
.314
2
269AB-8-4
1/2
1/4
11/16-20
1.82
.86
.99
.314
2
269AB-8-6
1/2
3/8
11/16-20
1.88
.93
.99
.408
2
269AB-8-8
1/2
1/2
11/16-20
1.99
1.03
1.18
.408
2
269AB-10-6
5/8
3/8
13/16-18
2.09
1.00
1.05
.408
2
269AB-10-8
5/8
1/2
13/16-18
2.18
1.09
1.24
.533
2
269AB-12-8
3/4
1/2
1-18
2.33
1.19
1.32
.533
2
269AB-12-12 3/4
3/4
1-18
2.50
1.26
1.32
.533
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
Female Elbows
Ref. SAE 120203 BA
UZ
PART
NO.
31278
31279
31280
31281
31282
31283
31284
31285
726
PK.
PARKER
PART
NO.
5
270AB-4-2
1/4
1/8
7/16-24
1.27
.69
.52
.189
5
270AB-4-4
1/4
1/4
7/16-24
1.36
.78
.71
.189
5
270AB-6-2
3/8
1/8
17/32-24
1.72
.83
.59
.314
5
270AB-6-4
3/8
1/4
17/32-24
1.78
.89
.77
.314
5
270AB-6-6
3/8
3/8
17/32-24
1.82
.93
.77
.314
2
270AB-8-6
1/2
3/8
11/16-20
1.99
1.03
.82
.408
2
270AB-8-8
1/2
1/2
11/16-20
2.09
1.13
1.01
.408
2
270AB-10-8
5/8
1/2
13/16-18
2.28
1.19
1.07
.533
Male Run Tees
Ref. SAE 120424 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
31286
31287
31288
31289
31290
31291
31292
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
5
271AB-4-2
1/4
1/8
7/16-24
1.20
.62
.66
.189
5
271AB-4-4
1/4
1/4
7/16-24
1.26
.68
.87
.189
5
271AB-6-4
3/8
1/4
17/32-24
1.68
.79
.92
.314
2
271AB-6-6
3/8
3/8
17/32-24
1.73
.84
.91
.314
2
2
271AB-8-6
271AB-8-8
1/2
1/2
3/8
1/2
11/16-20
11/16-20
1.89
1.99
.93
1.03
.99
1.18
.408
.408
2
271AB-10-8
5/8
1/2
13/16-18
2.18
1.09
1.24
.533
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
Male Branch Tees
Ref. SAE 120425 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
5
272AB-4-2
1/4
1/8
7/16-24
1.20
.62
.66
.189
5
272AB-4-4
1/4
1/4
7/16-24
1.26
.68
.87
.189
5
272AB-6-2
3/8
1/8
17/32-24
1.61
.72
.75
.189
5
272AB-6-4
3/8
1/4
17/32-24
1.68
.79
.92
.314
2
272AB-6-6
3/8
3/8
17/32-24
1.73
.84
.91
.314
2
272AB-8-6
1/2
3/8
11/16-20
1.89
.93
.99
.408
2
272AB-8-8
1/2
1/2
11/16-20
1.99
1.03
1.18
.408
2
272AB-10-8
5/8
1/2
13/16-18
2.18
1.09
1.24
.533
PIPE
THREAD
1/8
STRAIGHT
THREAD
7/16-24
M
.49
N
.63
FLOW
DIA. D
.189
.60
.85
.189
31293
31294
31295
31296
31297
31298
31299
31300
45° Elbows
Ref. SAE 120302 BA
UZ
PARKER
PART
PART
TUBE
NO.
PK.
NO.
SIZE
31301 5
279AB-4-2
1/4
31302
31303
31304
31305
31309
31306
31307
31310
31308
31311
L
.107
5
279AB-4-4
1/4
1/4
7/16-24
1.18
5
279AB-6-2
3/8
1/8
17/32-24
1.60
.71
.68
.189
5
279AB-6-4
3/8
1/4
17/32-24
1.64
.71
.85
.314
2
279AB-6-6
3/8
3/8
17/32-24
1.64
.75
.94
.314
2
279AB-6-8
3/8
1/2
17/32-24
1.67
.78
1.16
.314
2
279AB-8-6
1/2
3/8
11/16-20
1.80
.84
.94
.408
2
2
2
279AB-8-8
279AB-10-6
279AB-10-8
1/2
5/8
5/8
1/2
3/8
1/2
11/16-20
13/16-18
13/16-18
1.83
2.03
2.13
.87
.94
1.05
1.16
.98
1.16
.408
.408
.533
2
279AB-12-8
3/4
1/2
1-18
2.34
1.10
1.18
.533
727
Brass Air Brake - NTA Fittings
NTA Advantages
Meets D.O.T. FMVSS 571-106 air brake specifications. Utilizes ribbed sleeve for compression and positive grip. NTA bodies (less tube supports) are interchangeable with AB (SAE J246) fitting bodies.
Assembly Instructions:
No Special Tools Needed
You can assemble tubing to NTA fittings, no need to flare. Machined
from CA 360, CA 345 or CA 377 brass.
Specifications
Meets functional requirements of the SAE automotive tube fitting
standards: SAE J246 and SAE J1131.
Applications
Use with SAE J844 Type A and B nylon tubing in air brake
systems or in cab air controls.
Up to 150 PSI.
Temperature Ranges
Fittings will withstand variations from -40° to +200°F.
1. Cut tubing squarely –
maximum of 15° angle
allowable. Use of tube
cutter # 100444
is recommended.
2. Check that port or mating
part is clean and free of
debris.
3. Insert tubing into fitting
until it bottoms on seat.
4. Tighten nut with wrench
until one thread remains
visible on the fitting body;
or, the nut should be
screwed down finger tight,
then the wrench-tightened
as indicated in the following
table (this will allow for a
number of remakes).
Nomenclature
and size of the fitting. The first series of numbers and letters
describes the size.
EXAMPLE:
68
Male Connector
Nylon Tube Air Brake Fitting
5/8" (10/16) Tube Size
NTA
-10
-8
Tube
Size
Additional Number of
Turns from Hand-Tight
1/4
3
3/8, 1/2
4
5/8, 3/4
3-1/2
Sizes
the tube O.D.
Available in
an Assortment
PART # 00537
Found on Page 667
728
Sleeves
Ref. SAE 100115
UZ
PART
NO.
31312
31313
31314
31315
31316
31317
PK.
PARKER
PART
NO.
TUBE
SIZE
A
D
L
25
60NTA-3
3/16
.255
.194
.23
25
60NTA-4
1/4
.359
.256
.30
25
60NTA-6
3/8
.479
.384
.39
25
60NTA-8
1/2
.624
.509
.43
10
60NTA-10
5/8
.746
.634
.49
10
60NTA-12
3/4
.922
.760
.54
Nuts
Ref. SAE 100110
UZ
PART
NO.
32085
31318
31319
31320
31321
31322
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
C
HEX
D
L
25
61NTA-3*
3/16
5/16-24
7/16
.194
.40
25
61NTA-4
1/4
7/16-24
9/16
.256
.45
25
61NTA-6
3/8
17/32-24
5/8
.384
.63
10
61NTA-8
1/2
11/16-20
13/16
.509
.72
10
61NTA-10
5/8
13/16-18
15/16
.634
.77
10
61NTA-12
3/4
1-18
1-1/8 .762
.81
*Meets D.O.T. FMVSS 571.106 specifications. No applicable SAE specification
for this tube size.
Unions*
Ref. SAE 100101 BA
UZ
PART
NO.
31329
31330
31331
31332
31333
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
B
HEX
C
HEX
L
M
FLOW
DIA. D
10
62NTA-4
1/4
7/16-24
9/16
7/16
1.49
.83
.137
10
62NTA-6
3/8
17/32-24
5/8
9/16
2.00
1.08
.217
2
62NTA-8
1/2
11/16-20
13/16
11/16
2.33
1.29
.338
2
62NTA-10
5/8
13/16-18
15/16
13/16
2.39
1.41
.398
2
62NTA-12
*Tube support included.
3/4
1-18
1-1/8
1
2.60
1.58
.523
Stainless Steel Inserts
(For SAE J844 Tubing)
UZ
PART
NO.
31334
31335
31336
31337
31338
PK.
PARKER
PART
NO.
TUBE
SIZE
L
O.D.
25
63NTA-4
1/4
.53
.163
25
63NTA-6
3/8
.64
.245
25
63NTA-8
1/2
.81
.370
10
63NTA-10
5/8
.86
.434
10
63NTA-12
3/4
1.04
.559
729
Bulkhead Unions*
(NTA & air brake)
UZ
PART
NO.
PK.
PARKER
PART
NO.
2
62ANBH-4
1/4
2
62ANBH-6
3/8
2
62ANBH-8
1/2
31323
31324
31325
TUBE
SIZE
STRAIGHT
THREAD
B
HEX
C
HEX
L
M
FLOW
DIA. D
7/16-24
9/16
9/16
2.28
1.38
.137
17/32-24
11/16
3/4
2.97
1.62
.217
11/16-20
13/16
1
3.36
1.88
.338
Bulkhead Unions*
UZ
PART
NO.
32086
31326
31327
31328
32087
PK.
PARKER
PART
NO.
TUBE
SIZE
STRAIGHT
THREAD
B
HEX
C
HEX
L
M
FLOW
DIA. D
2
62NBH-3*
3/16
5/16-24
7/16
7/16
1.80
1.21
.087
2
62NBH-4
1/4
7/16-24
9/16
9/16
2.04
1.38
.137
2
62NBH-6
3/8
17/32-24
11/16
3/4
2.54
1.62
.217
2
62NBH-8
1/2
11/16-20
13/16
1
2.92
1.88
.338
2
62NBH-10
5/8
13/16-18
15/16
1
3.04
2.02
.398
*Meets D.O.T. FMVSS 571.106 specifications. No applicable SAE specification
for this tube size.
Bulkhead Union Reducer*
UZ
PART
NO.
PK.
PARKER
PART
NO.
31339
2
66NBH-8-6
TUBE
SIZE
1/2
A
E
PIPE
STRAIGHT STRAIGHT
THREAD THREAD
THREAD
3/8
11/16-20
7/8-14
B
HEX
1-1/16
C
HEX
1-1/16 1.94
Female Connectors
Ref. SAE 100103 BA
UZ
PART
NO.
31340
31341
31342
31343
31344
31345
31346
31347
31348
730
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
STRAIGHT
THREAD THREAD
7/16-24
FLOW
DIA. D
L
M
N
9/16
1.17
.84
.137
5
66NTA-4-2
1/4
1/8
5
66NTA-4-4
1/4
1/4
7/16-24 11/16
1.40
1.07
.137
5
66NTA-6-2
3/8
1/8
17/32-24 9/16
1.46
1.00
.217
5
66NTA-6-4
3/8
1/4
17/32-24 11/16
1.64
1.18
.217
2
66NTA-6-6
3/8
3/8
17/32-24
7/8
1.64
1.18
.217
2
66NTA-8-6
1/2
3/8
11/16-20
7/8
1.79
1.27
.338
2
66NTA-8-8
1/2
1/2
11/16-20 1-1/16 1.96
1.44
.338
2
66NTA-10-6
5/8
3/8
13/16-18
1.80
1.31
.398
2
66NTA-10-8
5/8
1/2
13/16-18 1-1/16 1.99
1.50
.398
7/8
L
FLOW
M DIA. D
1.42
.338
Male Connectors
Ref. SAE 100102 BA
UZ
PART
NO.
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
C
HEX
L
5
66NTA-3-1*
3/16
1/16
5/16-24
3/8
1.16
5
66NTA-3-2*
3/16
1/8
5/16-24
7/16
5
68NTA-3-4*
3/16
1/4
5/16-24
9/16
5
—
1/4
1/16
7/16-24
—
5
68NTA-4-2
1/4
1/8
7/16-24
7/16
5
68NTA-4-4
1/4
1/4
7/16-24
9/16
5
68NTA-4-6
1/4
3/8
7/16-24
11/16
5
68NTA-6-2
3/8
1/8
17/32-24
9/16
5
68NTA-6-4
3/8
1/4
17/32-24
9/16
2
68NTA-6-6
3/8
3/8
17/32-24
2
68NTA-6-8
3/8
1/2
17/32-24
2
68NTA-8-4
1/2
1/4
2
68NTA-8-6
1/2
3/8
2
68NTA-8-8
1/2
2
—
5/8
M
FLOW
DIA. D
.87
.087
1.15
.86
.087
1.35
1.05
.087
—
—
—
1.22
.89
.137
1.43
1.10
.137
1.47
1.14
.137
1.49
1.03
.217
1.67
1.21
.217
11/16
1.70
1.24
.217
7/8
1.89
1.43
.217
11/16-20
11/16
1.85
1.33
.338
11/16-20
11/16
1.85
1.33
.338
1/2
11/16-20
7/8
2.04
1.52
.338
3/4
13/16-18
—
—
—
—
2
68NTA-10-6
5/8
3/8
13/16-18
13/16
1.88
1.39
.398
2
68NTA-10-8
5/8
1/2
13/16-18
7/8
2.10
1.58
.398
2
68NTA-12-8
3/4
1/2
1-18
1
2.19
1.68
2
68NTA-12-12 3/4
3/4
1-18
1-1/16
2.22
1.71
*Meets D.O.T. FMVSS 571.106 specifications. No applicable SAE specification for this tube size.
.523
.523
32088
32089
32090
222132
31349
31350
31351
31352
31353
31354
31355
31356
31357
31358
222145
31359
31360
31361
31362
PK.
PARKER
PART
NO.
Union Tees
Ref. SAE 100401 BA
UZ
PART
NO.
31363
31364
31365
31366
PK.
PARKER
PART
NO.
5
264NTA-4
TUBE
SIZE
STRAIGHT
THREAD
1/4
7/16-24
L
M
FLOW
DIA. D
.95
.62
.137
5
264NTA-6
3/8
17/32-24
1.24
.78
.217
2
264NTA-8
1/2
11/16-20
1.45
.93
.338
2
264NTA-10
5/8
13/16-18
1.58
1.09
.398
264NTA-6-68
3/8
17/32-24, 11/16-20
222116 5
Union Elbows
Ref. SAE 100201 BA
UZ
PART
NO.
31367
31368
31369
31370
PK.
PARKER
PART
NO.
5
265NTA-4
1/4
5
265NTA-6
3/8
2
265NTA-8
1/2
11/16-20
1.45
.93
.338
2
265NTA-10 5/8
13/16-18
1.58
1.09
.398
TUBE
SIZE
STRAIGHT
THREAD
FLOW
DIA. D
L
M
7/16-24
.95
.62
.137
17/32-24
1.25
.79
.217
731
Male Elbows
Ref. SAE 100202 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
32091
32092
31371
31372
31373
31374
31375
31376
31377
31378
31379
31380
31381
31382
31383
32093
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
5
269NTA-3-2*
3/16
1/8
5/16-24
.90
.60
.67
.087
5
269NTA-3-4*
3/16
1/4
5/16-24
.91
.62
.87
.087
5
269NTA-4-2
1/4
1/8
7/16-24
.95
.62
.66
.137
5
269NTA-4-4
1/4
1/4
7/16-24
1.00
.68
.87
.137
5
269NTA-4-6
1/4
3/8
7/16-24
1.16
.73
.86
.137
5
269NTA-6-2
3/8
1/8
17/32-24
1.19
.73
.75
.217
5
269NTA-6-4
3/8
1/4
17/32-24
1.25
.79
.92
.217
5
269NTA-6-6
3/8
3/8
17/32-24
1.30
.84
.91
.217
2
269NTA-6-8
3/8
1/2
17/32-24
1.40
.94
1.10
.217
2
269NTA-8-4
1/2
1/4
11/16-20
1.38
.86
.99
.338
2
269NTA-8-6
1/2
3/8
11/16-20
1.44
.92
.99
.338
2
269NTA-8-8
1/2
1/2
11/16-20
1.55
1.03
1.18
.338
2
269NTA-10-6
5/8
3/8
13/16-18
1.49
1.00
1.05
.398
2
269NTA-10-8
5/8
1/2
13/16-18
1.58
1.09
1.24
.398
2
269NTA-12-8
3/4
1/2
1-18
1.70
1.19
1.33
.523
2
269NTA-12-12 3/4
3/4
1-18
1.77 1.26 1.32
.523
Female Elbows
Ref. SAE 100203 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
32094
31384
31385
31386
31387
31388
31389
31390
31391
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
5
270NTA-3-2*
3/16
1/8
5/16-24
.96
.67
.52
.087
5
270NTA-4-2
1/4
1/8
7/16-24
1.02
.69
.52
.137
5
270NTA-4-4
1/4
1/4
7/16-24
1.11
.78
.71
.137
2
270NTA-6-2
3/8
1/8
17/32-24
1.29
.83
.59
.217
2
270NTA-6-4
3/8
1/4
17/32-24
1.35
.89
.77
.217
2
270NTA-6-6
3/8
3/8
17/32-24
1.39
.93
.77
.217
2
270NTA-8-6
1/2
3/8
11/16-20
1.55
1.03
.82
.338
2
270NTA-8-8
1/2
1/2
11/16-20
1.65
1.13
1.01
.338
2
270NTA-10-8
5/8
1/2
13/16-18
1.70 1.19 1.07
.398
Male Run Tees
Ref. SAE 100424 BA
UZ
PARKER
PART
PART
NO.
PK.
NO.
31392
31393
31394
31395
31396
31397
31398
732
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
2
271NTA-4-2
1/4
1/8
7/16-24
.95
.62
.66
.137
2
271NTA-4-4
1/4
1/4
7/16-24
1.00
.68
.87
.137
2
271NTA-6-4
3/8
1/4
17/32-24
1.25
.79
.92
.217
2
271NTA-6-6
3/8
3/8
17/32-24
1.30
.84
.91
.217
2
271NTA-8-6
1/2
3/8
11/16-20
1.45
.93
.99
.338
2
271NTA-8-8
1/2
1/2
11/16-20
1.55
1.03
1.18
.338
2
271NTA-10-8
5/8
1/2
13/16-18
1.60
1.09
1.24
.398
Male Branch Tees
Ref. SAE 100425 BA
UZ
PART
NO.
32095
31399
31400
31401
31402
31403
32096
31404
31405
31406
PK.
PARKER
PART
NO.
5
5
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
272NTA-3-2* 3/16
1/8
7/16-24
272NTA-4-2
1/4
1/8
7/16-24
.90
.61
.66
.087
.95
.62
.66
.137
5
272NTA-4-4
1/4
1/4
2
272NTA-6-2
3/8
1/8
7/16-24
1.00
.68
.87
.137
17/32-24
1.18
.72
.75
.217
2
272NTA-6-4
3/8
1/4
2
272NTA-6-6
3/8
3/8
17/32-24
1.25
.91
.92
.217
17/32-24
1.30
.84
.91
.217
2
272NTA-8-4
1/2
2
272NTA-8-6
1/2
1/4
11/16-20
1.41
.89
.99
.338
3/8
11/16-20
1.45
.93
.99
.338
2
272NTA-8-8
1/2
1/2
11/16-20
1.55 1.03
1.18
.338
2
272NTA-10-8 5/8
1/2
13/16-18
1.60 1.09 1.24
.398
*Meets D.O.T FMVSS 571.106 specifications. No applicable SAE specification for this tube size.
45° Elbows
Ref. SAE 100302 BA
UZ
PART
NO.
5
TUBE
SIZE
PIPE
THREAD
STRAIGHT
THREAD
L
M
N
FLOW
DIA. D
279NTA-4-2
1/4
1/8
7/16-24
.81
.49
.63
.137
5
279NTA-4-4
1/4
1/4
7/16-24
.93
.60
.85
.137
2
279NTA-6-2
3/8
1/8
17/32-24
1.17
.71
.68
.217
2
279NTA-6-4
3/8
1/4
17/32-24
1.17
.71
.85
.217
2
279NTA-6-6
3/8
3/8
17/32-24
1.21
.75
.94
.217
2
279NTA-6-8
3/8
1/2
17/32-24
1.24
.78
1.16
.217
2
—
1/2
1/4
17/32-24
—
—
—
—
2
279NTA-8-6
1/2
3/8
11/16-20
1.36
.84
.94
.338
2
279NTA-8-8
1/2
1/2
11/16-20
1.39
.87
1.16
.338
2
279NTA-10-6 5/8
3/8
13/16-18
1.43
.94
.98
.398
2
279NTA-10-8 5/8
1/2
13/16-18
1.42
.93
1.16
.398
2
279NTA-12-8 3/4
1/2
1-18
1.61 1.10
1.18
.523
31407
31408
31409
31410
31411
31412
222197
31413
31414
32097
31415
32098
PK.
PARKER
PART
NO.
733
Brass Insta-Lok Air Brake Fittings
Advantages
• Sizes 5/32” and above meet D.O.T. FMVSS 571.106 air
brake performance specifications.
• No special tools are needed to assemble. Just bottom
the tubing in the fitting body for a positive seal.
• Stainless steel tube support in sizes 1/4" and above
assures maximum flow and performance requirements
of SAE J1131.
• Insta-Lok is designed for use in pressure protected air
accessory lines that are isolated from the air brake system.
MEE
SPEC TS D.O.
T
IFICA
TIONS .
Application
Use with SAE J844 type A & B nylon tubing. Designed for all D.O.T.
truck and trailer applications. Prior to use, all applications should
be carefully tested through the range of conditions which may be
encountered.
Features
1. All brass body
2. Stainless steel tube support assures maximum flow
and per formance characteristics.
3. Elbows and tees are available in swivel or dry seal pipe
threads. Swivels are for alignment purposes only.
4. Lubricated O-Ring Seal (Buna N) insures a quick, easy and
positive seal.
5. Innovative Collet design insures positive grip on tubing.
6. Release Button offers quick and easy disconnection.
Technical Data
• Working pressure from vacuum to 250 PSI.
• Working temperature from -40°F to +200°F.
(Note: See tubing manufacturer's recommendations for
pressure and temperature limitations).
• Buna N (Nitrile) O-Rings.
1.
2.
3.
4.
5.
Cut tubing squarely-maximum of 15° angle allowable.
• Use of tube cutter #100444 is recommended.
Check that port or mating part is clean and free of debris.
Insert tubing into fitting until it bottoms.
• Push twice to verify that tubing is inserted past collet
and O-Ring.
Pull on tubing to verify it is fully inserted.
To disassemble, simply press release button, hold against
body, and pull tubing out of fitting.
Note: In order to pass hot pull requirements of SAE
J1131 a stainless steel tube support must be present in
the end of the fitting before final fitting assembly.
734
Insert tubing until it bottoms
Depress button to remove tubing
Unions
UZ
PART
NO.
123689
123690
102264
102265
102266
102267
123691
PK.
2
2
2
2
2
2
2
Union Tees
UZ
PART
102281
102282
123692
102283
123693
PK.
2
2
2
2
2
Union Elbows
UZ
PART
123694
123695
123696
123697
PK.
2
2
2
2
Bulkhead Union
PK.
2
2
2
Male Connectors
UZ
PART
NO.
123701
123702
123703
123704
123705
123706
123707
123708
102268
102269
102270
102271
102272
102273
102274
102275
102276
102277
102278
102279
102280
PK.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
TUBE
SIZE
5/32
3/16
1/4
3/8
1/2
5/8
1/4-1/8
PARKER
SIZE
164PMT-4
164PMT-6
164PMT-6-6-4
164PMT-8
164PMT-10
TUBE
SIZE 1
1/4
3/8
3/8
1/2
5/8
TUBE
SIZE 2
1/4
3/8
1/4
1/2
5/8
PARKER
SIZE
165PMT-4
165PMT-6
165PMT-8
165PMT-10
TUBE
SIZE
1/4
3/8
1/2
5/8
L
.85
1.11
1.24
1.57
PARKER
SIZE
62PMTBH-4
62PMTBH-6
62PMTBH-8
TUBE
SIZE
1/4
3/8
1/2
PARKER
PART
NO.
68PM-2-1
68PM-2-2
68PM-5/32-1
68PM-5/32-2
68PM-5/32-4
68PM-3-1
68PM-3-2
68PM-3-4
68PMT-4-2
68PMT-4-4
68PMT-4-6
68PMT-6-2
68PMT-6-4
68PMT-6-6
68PMT-6-8
68PMT-8-4
68PMT-8-6
68PMT-8-8
68PMT-10-6
68PMT-10-8
68PMT-12-8
TUBE
SIZE
1/8
1/8
5/32
5/32
5/32
3/16
3/16
3/16
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
L
1.60
1.35
1.48
1.87
2.03
2.42
1.48
OD
L
.56
.88
1.00
1.69
1.93
2.02
PIPE
THREAD
1/16
1/8
1/16
1/8
1/4
1/16
1/8
1/4
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
O.D
.406
.440
.50
.75
.88
1.00
.50
L1
.85
1.21
1.21
1.27
1.63
L2
.85
1.21
.93
1.27
1.62
P
Max
.25
.44
.58
L
.93
.88
.95
.74
.99
.95
.92
1.10
1.06
1.19
1.27
1.37
1.43
1.33
1.38
1.43
1.52
1.44
1.88
1.88
2.03
HEX
A
11/16
1-1/16
1-1/4
HEX
3/8
7/16
3/8
7/16
9/16
7/16
7/16
9/16
1/2
9/16
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1
1
1-3/16
HEX
B
3/4
1-1/16
1-1/4
BULKHEAD
HOLE DIA.
9/16
7/8
1
UZ
PART
123698
123699
123700
PARKER
PART
NO.
62PM-5/32
62PM-3
62PMT-4
62PMT-6
62PMT-8
62PMT-10
62PMT-4-2
PART # 102565
Available in
an Assortment
Found on Page 667
PART # 102566
Found on Page 667
PART # 102567
Found on Page 668
PART # 102568
Found on Page 668
PART # 102569
Found on Page 668
735
UZ
PART
NO.
102284
102285
102286
102287
102288
102289
102290
102291
102292
102293
102294
102295
PK.
2
2
2
2
2
2
2
2
2
2
2
2
PARKER
PART
NO.
169PMT-4-2
169PMT-4-4
169PMT-4-6
169PMT-6-2
169PMT-6-4
169PMT-6-6
169PMT-6-8
169PMT-8-4
169PMT-8-6
169PMT-8-8
169PMT-10-6
169PMT-10-8
TUBE
SIZE
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
PIPE
THREAD
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
L
.84
.84
.84
1.11
1.11
1.11
1.11
1.27
1.27
1.27
1.53
1.53
N
1.21
1.43
1.43
1.41
1.58
1.58
1.79
1.73
1.81
1.96
2.03
2.18
WRENCH
FLATS
13/32
13/32
13/32
9/16
9/16
9/16
9/16
11/16
11/16
11/16
7/8
7/8
HEX
7/16
9/16
11/16
9/16
5/8
11/16
7/8
5/8
3/4
7/8
3/4
7/8
L
.79
.89
.99
.99
.99
1.20
1.20
1.20
N
1.16
1.46
1.44
1.61
1.61
1.70
1.78
1.93
WRENCH
FLATS
9/16
9/16
3/4
3/4
3/4
7/8
7/8
7/8
HEX
7/16
9/16
5/8
5/8
5/8
5/8
3/4
7/8
UZ
PART
NO.
102296
102297
102298
102299
102300
102301
102302
102303
PK.
2
2
2
2
2
2
2
2
PARKER
PART
NO.
179PMT-4-2
179PMT-4-4
179PMT-6-2
179PMT-6-4
179PMT-6-6
179PMT-8-4
179PMT-8-6
179PMT-8-8
TUBE
PIPE
SIZE THREAD
1/4
1/8
1/4
1/4
3/8
1/8
3/8
1/4
3/8
3/8
1/2
1/4
1/2
3/8
1/2
1/2
Bulkhead Male Connector
UZ
PART
123709
123710
PK.
2
2
PARKER
SIZE
68PMTBH-6-8
68PMTBH-8-8
TUBE
SIZE
3/8
1/2
PIPE
THREAD
1/2
1/2
L
P
Max
.33
.33
2.37
2.38
Male Connector To Metric Adapter
UZ
PART
123711
123712
123713
123714
PK.
2
2
2
2
PARKER
TUBE
SIZE
SIZE
68PMT-4-M12
1/4
68PMT-6-M12
3/8
68PMT-8-M12
1/2
68PMT-10-M16 5/8
Male 90o Non Swivel
UZ
PART
123715
123716
123717
736
PK.
2
2
2
PARKER
SIZE
169PMNS-5/32-2
169PMNS-3-2
169PMNS-3-4
METRIC
THREAD
M12X1.5
M12X1.5
M12X1.5
M16X1.5
TUBE
SIZE
5/32
3/16
3/16
L
1.19
1.40
1.45
1.78
PIPE
THREAD
1/8
1/8
1/4
HEX
H EX BULKHEAD
A
B
HOLE DIA.
1-1/4 1-1/4
1
1-1/4 1-1/4
1
B
N
11/16
3/4
7/8
1
.29
.29
.29
.39
L
N
.88
.75
.74
.68
.67
.93
WRENCH
FLATS
3/8
3/8
1/2
Air Brake / Brass End Fittings
Advantages
Easy to assemble and disassemble. Extruded from CA360 or CA345 brass. Sleeves are made from CA274 brass.
Specifications
Air brake hose ends will meet D.O.T.FMVSS571.106 standards
when used with SAE J1402 Air brake hose.
Applications
Air brake hose connections.
1.Slide nut onto hose.
2.Slide sleeve onto hose with tapered edge toward fitting body
(see example).
3.Bottom hose into fitting.
4.Tighten nut until it contacts body hex.
Note: When reassembling fitting, body and nut should be
inspected. Only reuse if parts are in proper condition. Sleeves
should never by reused.
Up to 125 PSI
Temperature Ranges
From -40°F to +120°F
Nomenclature
and size of the fitting. The first series of numbers and
letters identifies the style and type fitting. The second series
of numbers describes the size.
RB
SG
-6
-8
EXAMPLE:
68
Male Connector
Air Brake Hose End
Spring Guard
3/8" (6/16) Hose I.D.
Sizes
Hose sizes are determined by the number of sixteenths of an inch
in the hose I.D.
Available in
an Assortment
PART # 00328
Found on Page xxx
737
Air Brake / Brass End Fittings
Springs
UZ
PART
NO.
36590
36591
PK.
PARKER
PART
NO.
1
1
HOSE
SIZE
L
56RBSG-6
3/8
56RBSG-8
D1
D2
2.75
.84
.78
1/2
3.00
1.03
.91
PK.
PARKER
PART
NO.
HOSE
SIZE
L
A
D
1
60RB-6
3/8
.69
.90
.78
1
60RB-8
1/2
.69
1.03
.92
PK.
PARKER
PART
NO.
HOSE
SIZE
1
61RB-6
1
61RB-8
Sleeves
UZ
PART
NO.
36584
36585
Nuts
UZ
PART
NO.
36586
36587
STRAIGHT
THREAD
HEX
L
D
3/8
31/32-20
1-1/16
1.12
.80
1/2
1-3/32-20
1-1/4
1.12
.93
STRAIGHT
THREAD
HEX
L
D
Spring Guard Nuts
UZ
PART
NO.
36588
36589
PK.
PARKER
PART
NO.
1
61RBSG-6
3/8
31/32-20
1-1/16
1.22
.80
1
61RBSG-8
1/2
1-3/32-20
1-1/4
1.19
.92
HOSE
SIZE
Union Hose Mender
UZ
PART
NO.
36577
36578
PK.
PARKER
PART
NO.
HOSE
SIZE
STRAIGHT
THREAD
HEX
L
M
1
62RB-6
3/8
31/32-20
31/32
2.98
2.56
.281
1
62RB-8
1/2
1-3/32-20
1-1/8
2.99
2.55
.390
HEX 2
L
M
D
Female Swivel Connectors
UZ
PART
NO.
36560
36561
PK.
PARKER
PART
NO.
1
66RBSV-6-3/4
3/8
3/4-20
31/32
7/8
2.30
2.09 .281
1
66RBSV-8-7/8
1/2
7/8-20
1-1/8
1
2.36
2.14 .390
HOSE
SIZE
STRAIGHT
THREAD HEX 1
D
Male Connectors
UZ
PART
NO.
36567
36568
36569
36570
36571
738
PK.
PARKER
PART
NO.
HOSE
SIZE
STRAIGHT
THREAD
PIPE
THREAD
HEX
L
M
D
1
68RB-6-4
3/8
31/32-20
1/4
31/32
2.24
1.91
.281
1
68RB-6-6
3/8
31/32-20
3/8
31/32
2.24
1.91
.281
1
68RB-6-8
3/8
31/32-20
1/2
31/32
2.38
2.06
.281
1
68RB-8-6
1/2
1-3/32-20
3/8
1-1/8
2.24
1.91
.390
1
68RB-8-8
1/2
1-3/32-20
1/2
1-1/8
2.29
2.07
.390
Air Brake / Split Sleeve Fittings
Male Connector Body Insert
UZ
PART
NO.
PK.
PARKER
PART
NO.
1
36579
36580
36581
36582
36583
STRAIGHT
THREAD
PIPE
THREAD
HEX
L
D
68RB-6-4B
31/32-20
1/4
31/32
1.91
.281
1
68RB-6-6B
31/32-20
3/8
31/32
1.91
.281
1
68RB-6-8B
31/32-20
1/2
31/32
2.06
.281
1
68RB-8-6B
1-3/32-20
3/8
1-1/8
1.91
.390
1
68RB-8-8B
1-3/32-20
1/2
1-1/8
2.07
.390
Male Connectors with Spring Guard
UZ
PART
NO.
PK.
PARKER
PART
NO.
1
1
36572
36573
36574
36575
36576
STRAIGHT
THREAD
PIPE
THREAD
68RBSG-6-4
3/8
68RBSG-6-6
3/8
1
68RBSG-6-8
1
68RBSG-8-6
1
68RBSG-8-8
HEX
L
M
D
1/4
31/32
4.8
1.91
.281
3/8
31/32
4.8
1.91
.281
3/8
1/2
31/32
4.9
2.06
.281
1/2
3/8
1-1/8
5.0
1.91
.390
1/2
1/2
1-1/8
5.2
2.07
.390
Adapters
PARKER
PART
PK. NO.
36564
36593
36565
36566
1
PIPE
THREAD
STRAIGHT
THREAD
HEX
L
D
76RB-3/4-4
1/4
3/4-20
3/4
1.06
.31
1
76RB-3/4-6
3/8
3/4-20
3/4
1.12
.31
1
76RB-7/8-6
3/8
7/8-20
7/8
1.18
.44
1
76RB-7/8-8
1/2
7/8-20
7/8
1.37
.50
UZ
PART
NO.
Split Sleeve Fittings/Truck Transmission
For air control systems, instrumentation, water, air and lubrication systems.
Excellent vibration characteristics depending on tubing.
Temperature: -65oF to 250oF
Used with: Polyethylene, nylon, copper and plastic tubing.
Advantages: Low cost, no flaring required, reusable, easy to assemble, not necessary to remove sleeve and nut.
Split Sleeves
Male Connector
UZ PART #
99-10744-2
99-10744-3
99-10650
99-10651
QTY
1/8
25
5/32
25
TUBE SIZE
QTY
1/8
10
5/32
10
QTY.
1/8
1/16-27
10
1/8
1/8-27
10
5/32
1/16-27
10
Union
5/32
1/8-27
10
UZ PART #
TUBE SIZE
99-10744-10
99-10653
TUBE SIZE
99-10744
99-10654
PIPE THRD.
Nut
UZ PART #
UZ PART #
TUBE SIZE
THRD.
SIZEQTY.
1/8
5/16-24
25
5/32
5/16-24
25
99-10744-5
99-10655
Male 90° Elbow
UZ PART #
99-10744-8
99-10652
TUBE SIZE
PIPE THRD.
QTY.
1/8
1/8-27
10
5/32
1/8-27
10
739
DOT Push to Connect Fittings
DOT FMVSS 106 Fitting
DOT Technical Specification
collet
Suitable Fluids
compressed air only
lubricated or non-lubricated
Working Pressure
28" Hg
275 psi maximum
Working Temperature
-40° to 230° F
Tubing
Tubing used should comply
with SAE standards. Legris air
brake tubing on pg M18
can be used.
Materials of Construction body: glass reinf. nylon 12
glass filled (except 3/16” nylon
6.6 glass filled)
seals: low temp. BUNA-N (xx-40° F)
collet: brass
tube support: brass
base: brass
Available in
an Assortment
Technology
PART #00477
Found on Page 669
Kwik Pak #00480KP
Found on Page 669
Kwik Pak #00492KP
Found on Page 670
Straight Male DOT Connector
Tube x Male NPT
Part No.
Vendor No.
QTY
Tube O.D.
Thread
1/8
3/16
1/8
1/4
116438
1/4
1/4
116439
3/8
1/4
116440
1/8
3/8
117764
1/4
3/8
116441
3/8
3/8
116442
1/2
3/8
117765
3/8
1/2
116443
1/2
1/2
116444
740
3115 56 11DOT
3115 56 14DOT
3115 56 18DOT
3115 60 11DOT
3115 60 14DOT
3115 60 18DOT
3115 60 22DOT
3115 62 18DOT
3115 62 22DOT
10
10
10
10
6
6
6
6
6
Male DOT Elbow
Tube x Male NPT
Part No.
Vendor No.
QTY
116445
116446
116447
3109 56 11DOT
3109 56 14DOT
3109 56 18DOT
10
10
10
116448
116449
3109 60 14DOT
3109 60 18DOT
6
6
Straight Female DOT Connector
Tube x NPT
Part No.
Vendor No.
QTY
10
*116457 3114 55 11DOT
6
116458 3114 56 11DOT
DOT Push to Connect Fittings
Tube O.D.
5/32
1/4
3/8
1/2
Straight DOT Union
Tube x Tube
Part No.
Vendor No.
116450 3106 04 00DOT
116451 3106 56 00DOT
116452 3106 60 00DOT
116453 3106 62 00DOT
Tube O.D.
1/4
3/8
1/2
Part No.
116456
117767
117768
QTY
10
10
6
6
DOT Union Elbow
Tube x Tube
Vendor No.
3102 56 00DOT
3102 60 00DOT
3102 62 00DOT
DOT Union Tee
Tube x Tube x Tube
Part No.
Vendor No.
116454
116455
117766
3104 56 00DOT
3104 60 00DOT
3104 62 00DOT
QTY
6
2
2
QTY
6
4
2
Part No.
*116460
Bulkhead DOT Union
Tube x Tube
Part No.
Vendor No.
*116459
QTY
3116 56 00DOT
Plug-In DOT ELbow
Tube x Tube
Vendor No.
3182 56 00DOT
10
QTY
10
Specifications for Flow Control Regulators
Flow Control Regulators:
Fluids: Compressed air
Body Material: Nylon 6.6
Seal: Nitrile
Pressure Rating: 15-145 PSI
Temperature Range: 30°F to 160°F
Thread Sizes: 1/8" to 3/8"
Tubing Types: Nylon, Polyurethane, Polyethylene
Compact Flow Control Regulators
Tube O.D.
5/32
1/4
1/4
3/8
3/8
Thread
1/8
1/8
1/4
1/4
3/8
Part No.
116302
116303
116304
116305
116306
Compact Flow Control
Meter Out - Tube to NPT
Vendor No.
7065 04 11
7065 56 11
7065 56 14
7065 60 14
7065 60 18
QTY
1
1
1
1
1
741
Miniature Flow Controls
Tube O.D.
Thread
1/8
5/32
5/32
1/4
1/4
1/4
3/8
3/8
1/8
10-32
1/8
10-32
1/8
1/4
1/4
3/8
Miniature Flow Control
Meter Out - Tube to UNF or NPT
Part No.
Vendor No.
*116271
116269
116272
116270
116273
116274
7665 53 11
7660 04 20
7665 04 11
7660 56 20
7665 56 11
7665 56 14
QTY
10
1
1
1
1
1
Knobless Compact Flow Control
Meter Out - Tube to NPT
Part No.
Vendor No.
*116264
7015 04 11
10
*116265
*116266
*116267
*116268
7015 56 11
7015 56 14
7015 60 14
7015 60 18
10
10
5
5
In-Line Flow Control (Push-to-Connect Ports)
Tube O.D.
5/32
1/4
3/8
1/2
Part No.
116275
116276
116277
116278
In-Line Flow Control (Push to Connect Ports)
One-Way
Vendor No.
7770 04 00
7770 56 00
7770 60 00
7770 62 00
QTY
1
1
1
1
Threaded In-Line Flow Control
NPT
1/8
1/4
3/8
Part No.
*116279
*116300
*116301
Threaded In-Line Flow Control
Vendor No.
7775 11 11
7775 14 14
7775 18 18
742
QTY
QTY
5
5
4
Brass Hose Barb Fittings
Advantages
All hose barb fitting pipe threads are made to Dryseal standards. Connectors, unions, nuts and extended
elbows and tees are machined from CA 360 and CA 345 brass.
Temperature and Working
Pressure Ranges
From -40° to +160°F. at 150 PSI maximum.
Note: These fittings are intended for use with a hose clamp,
similar type clamp or a crimped ferrule.
1. Cut hose cleanly and squarely to length.
2. Slide clamp on hose.
3. Lubricate hose. Push hose on fitting until hose bottoms
against stop ring or hex.
4. Position hose clamp as shown below and secure with a
screw-driver or wrench. Maintain “A” dimension noted
below for proper clamp posititioning.
Nomenclature
style and size of the fitting. The first series of numbers and
letters identifies the style and the type fitting. The second series of numbers
describes the size.
EXAMPLE:
128
Male Ball End
Hose Barb
Swivel
3/8" (6/16) Hose I.D.
1/4" (4/16) N.P.S.M.
HBL
SV
-6
-4
Sizes
Pipe sizes are determined by the number of sixteenths of an inch in the pipe size.
Swivel Female Barb W/Ball Seat
UZ Part #
Hose I.D.
1/8
3/16
1/4
1/4
1/4
5/16
3/8
3/8
3/8
1/2
1/2
Pipe Thread
1/8
1/8
1/8
1/4
3/8
1/4
1/4
3/8
1/2
3/8
1/2
Hose Barb Male 90 Degree Elbow
UZ Part #
119157
119158
119159
119160
119161
119162
119163
119164
119165
119166
PK.
10
10
10
10
5
5
5
5
5
5
Hose I.D.
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
Pipe Thread
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
Hose Barb SAE Male
UZ Part # PK.
119167
10
119168
10
119169
10
119170
10
119171
5
119172
5
119173
5
Hose I.D.
3/16
1/4
1/4
5/16
3/8
3/8
1/2
Pipe Thread
1/4
1/4
3/8
5/16
3/8
1/2
1/2
119146
119147
119148
119149
119150
119151
119152
119153
119154
119155
119156
PK.
10
10
10
10
10
10
10
5
5
5
5
Hose Barb Tee
UZ Part #
119180
119181
119182
PK
5
5
5
Hose I.D.
1/4
5/16
3/8
Available in
an Assortment
Hose Barb Male 45 Degree Elbow
UZ Part #
119174
119175
119176
119177
119178
119179
PK.
10
10
10
5
5
5
Hose I.D.
1/4
5/16
5/16
3/8
3/8
3/8
Pipe Thread
1/8
1/8
1/4
1/8
1/4
3/8
PART # 00545
Found on Page 670
743
Brass Hose Barb Fittings
Hose Menders
UZ
PART
NO.
221967
221968
221969
221970
221971
119138
PK.
10
10
10
5
5
5
PARKER
PART
NO.
122HB-3*
122HBL-4
122HBL-5
122HBL-6
122HBL-8
—
I.D. HOSE
SIZE
3/16
1/4
5/16
3/8
1/2
5/8
C
DIA.
5/16
3/8
7/16
1/2
5/8
—
L
1.44
2.00
2.00
2.00
2.00
—
M
.69
.97
.97
.97
.97
—
FLOW
DIA. D
.125
.187
.250
.281
.375
—
O.D.
.227
.290
.353
.415
.530
—
Hose Barb to Male Pipe
UZ
PART
NO.
119139
221931
119140
221933
221934
221935
221936
221937
221938
221940
221941
221942
221939
221943
221944
221945
221946
221947
221948
221949
221950
221951
221952
221953
PK.
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
2
2
PARKER
PART
I.D. HOSE
PIPE
C
NO.
SIZE
THREAD HEX
—
1/8
1/8
—
—
3/16
1/8
—
—
3/16
1/4
—
125HBL-4-2
1/4
1/8
7/16
125HBL-4-4
1/4
1/4
9/16
125HBL-4-6
1/4
3/8
11/16
125HBL-5-2
5/16
1/8
7/16
125HBL-5-4
5/16
1/4
9/16
125HBL-5-6
5/16
3/8
11/16
125HBL-6-2
3/8
1/8
7/16
125HBL-6-4
3/8
1/4
9/16
125HBL-6-6
3/8
3/8
11/16
125HBL-6-8
3/8
1/2
7/8
125HBL-8-4
1/2
1/4
9/16
125HBL-8-6
1/2
3/8
11/16
125HBL-8-8
1/2
1/2
7/8
125HBL-8-12 1/2
3/4
1-1/16
125HBL-10-6 5/8
3/8
11/16
125HBL-10-8 5/8
1/2
7/8
125HBL-10-12 5/8
3/4
1-1/16
125HBL-12-8 3/4
1/2
7/8
125HBL-12-12 3/4
3/4
1-1/16
125HBL-16-12 1
3/4
1-1/16
125HBL-16-16 1
1
1-3/8
L
M
—
—
—
—
—
—
1.54 .97
1.64 .97
1.71 .97
1.54 .97
1.64 .97
1.71 .97
1.54 .97
1.64 .97
1.71 .97
1.86 .97
1.64 .97
1.71 .97
1.86 .97
1.88 .97
1.71 .97
1.86 .97
1.92 .97
1.86 .97
1.88 .97
2.08 1.17
2.23 1.17
O.D.
—
—
—
.290
.290
.290
.353
.353
.353
.415
.415
.415
.415
.530
.530
.530
.530
.645
.645
.645
.790
.790
1.02
1.02
FLOW
DIA. D
—
—
—
.187
.187
.187
.250
.250
.250
.281
.281
.281
.281
.375
.375
.375
.375
.468
.468
.468
.562
.562
.750
.875
FLOW
O.D.
—
.290
.290
—
—
.353
—
.415
.415
.415
—
—
.530
.530
DIA. D
—
.187
.187
—
—
.250
—
.281
.281
.281
—
—
.375
.375
Hose Barb to Female Pipe
UZ
PART
NO.
119141
221954
221955
119142
119143
221957
221958
221959
221960
221961
119144
119145
221962
221963
744
PK.
10
10
10
10
10
10
10
5
5
5
5
5
5
5
PARKER
PART
I.D. HOSE
NO.
SIZE
—
3/16
126HBL-4-2
1/4
126HBL-4-4
1/4
—
1/4
—
5/16
126HBL-5-4
5/16
—
5/16
126HBL-6-2
3/8
126HBL-6-4
3/8
126HBL-6-6
3/8
—
3/8
—
1/2
126HBL-8-6
1/2
126HBL-8-8
1/2
PIPE
THREAD
1/8
1/8
1/4
3/8
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/4
3/8
1/2
C
HEX
—
1/2
11/16
—
—
11/16
—
1/2
11/16
13/16
—
—
13/16
1
L
—
1.47
1.58
—
—
1.58
—
1.47
1.58
1.63
—
—
1.59
1.73
M
—
.97
.97
—
—
.97
—
.97
.97
.97
—
—
.97
.97
Ball Valves
FULL PORT 600WOG FORGED BRASS BALL VALVE
Features
• SOLID CHROME PLATED BRASS BALL
• Suitable for full range of liquids and gases
• Minimal pressure drop due to large full size ports
• Bottom loaded, pressure retaining stem
• Pressure rated at 600psi (42 bars) WOG (non-shock)
and 150 WSP (10.34 bars) saturated steam. Virgin TFE
stem packing seal, thrust washer and seats.
• Yellow vinyl insulator on heavy duty plated carbon
steel handles.
• Fast 1/4 turn open or close operation
• Low operating torque
• Flow can go both directions
• Adjustable stem packing gland
• Maximum operating temerature: 2480F (1200C) at 600 PSI
• Minimum operating temperature: -200F (-400C)
• Each valve individually tested
• Forged Brass - for more strength
• Threaded ends to ANSI B1.20.1
• Hard chromium plated solid ball
• Bottom entry, blow-out proof stem
• Deeper threads - for better connections
5 PSIG
C
US
CSA AGA 3.88 5 PSIG
UL842, UL258, UL125, FM
600 PSI non-shock cold water, gas, oil
-150 PSI saturated steam
C
CH
B
NPT DN
Female x Female
E
A
Part#
MM943-200
MM943-201
MM943-202
MM943-203
MM943-204
MM943-205
MM943-206
MM943-207
Size
NPT(G)
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
DN
0.31
0.39
0.59
0.78
0.98
1.26
1.57
1.97
Dimension Inches
A
B
1.96
1.57
1.96
1.57
2.28
1.77
2.44
1.89
3.03
2.20
3.46
2.36
3.94
3.15
4.45
3.15
QTY
C
3.43
3.43
3.35
3.35
4.61
4.61
6.30
6.30
E
0.43
0.43
0.61
0.64
0.75
0.77
0.77
0.79
CH
0.74
0.86
0.94
1.22
1.50
1.89
2.12
2.63
1
1
1
1
1
1
1
1
745
Ball Valves
GLOBAL FULL PORT 600WOG FORGED BRASS BALL VALVE
Features
• Suitable for full range of liquids and gases
• Minimal pressure drop due to large full size ports
• Bottom loaded, pressure retaining stem
• Pressure rated at 600psi (42 bars) WOG (non-shock)
and 150 WSP (10.34 bars) saturated steam. Virgin TFE
stem packing seal, thrust washer and seats
• Yellow vinyl insulator on heavy duty plated carbon
steel handles
• Fast 1/4 turn open or close operation
• Low operating torque
• Adjustable stem packing gland
• Maximum operating temperature: 3020F (1500C)
• Minimum operating temperature: -220F (-300C)
• Each valve individually tested
• Forged Brass - for more strength
• Threaded ends to ANSI B1.20.1
• Hard chromium plated solid ball
• Bottom entry, blow-out proof stem
• Deeper threads - for better connections
1/2” - 2” Sizes Gas Approved
5 PSIG
C
600 PSI non-shock cold water, gas, oil
-150 PSI saturated steam
US
C
CH
B
NPT DN
Female x Female
E
A
Part#
MM940-171
MM940-172
MM940-173
MM940-174
MM940-175
MM940-176
MM940-177
MM940-178
746
Size
NPT (G)
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
DN
0.39
0.39
0.59
0.78
0.98
1.26
1.57
1.97
Dimension Inches
A
B
1.75
1.75
1.75
1.75
2.05
1.91
2.32
2.03
2.73
2.44
3.13
2.56
3.54
3.01
4.09
3.37
QTY
C
3.54
3.54
3.74
4.41
4.41
4.98
5.79
6.10
E
0.46
0.46
0.49
0.53
0.61
0.65
0.67
0.75
CH
0.79
0.79
0.96
1.20
1.48
1.63
2.10
2.62
1
1
1
1
1
1
1
1
Needle & Truck Valves
Advantages
Needle and Truck Valves have metal-to-metal seats, with fine-threaded screwdown.
This enables positive sealing up to the capacity of the valve.
Working Pressure and Temperature
Valves are designed to withstand up to 150 PSI working
pressure, unless otherwise noted. See specific part number
for temperature range.
Needle Valves Installation
Instructions
Series NV valves should always be installed with the
pressure against the seat. Refer to drawing to determine
correct direction of flow.
Nomenclature
describes the size.
Example:
NV
Needle Valve
Angle Needle Valve
Flared to Male Pipe
1/4" (4/16) Tube O.D.
101 F
-4
-2
747
Angle Needle Valves
Flare to Male Pipe
Temperature Range: -45° to +250°F
UZ
PART
NO.
31761
31760
PK.
PARKER
PART
NO.
1
NV101F-4-2
1/4
1/8
1
NV101F-6-4
3/8
1/4
TUBE
PIPE
SIZE THREAD
H
L
M
N
1.50
1.58
.75
.66
1.38
1.86
.95
.90
Needle Valves
Flare to Flare *Provided with Pin Handle
UZ
PART
NO.
35217
35218
PK.
PARKER
PART
NO.
TUBE
SIZE
H
L
M
1
NV102F-4*
1/4
1.50
1.34
1.50
1
NV102F-6
3/8
1.38
1.55
1.86
H
Needle Valves
Flare to Male Pipe *Provided with Pin Handle
UZ
PART
NO.
35219
35220
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
1
NV103F-4-2*
1/4
1/8
1
NV103F-6-4
3/8
1/4
TUBE
SIZE
PIPE
THREAD
1/4
1/8
L
M
1.50
1.33
1.35
1.38
1.56
1.73
L
M
1.89
.53
Humidifier Valve
UZ
PART
NO.
PK.
PARKER
PART
NO.
35221
1
HV104C-4-2
H
1.50
Humidifier Valve Clamp Kit
Clamp fits 3/8" O.D. through 1.315" O.D. tube
or pipe. Kit includes 60PT-4 and 63PT-4 for assembly with plastic or nylon tubing.
For complete kit, specify entire part number as shown below:
UZ
PART
NO.
PK.
PARKER
PART
NO.
35222
1
HV104C-4-2 KIT
748
TUBE
SIZE
1/4
PIPE
THREAD
1/8
Self-Piercing Humidifier Valve Clamp Kit
Clamp fits 3/8" O.D. through 1.315" O.D. tube or pipe.
Kit includes 60PT-4 and 63PT-4 for assembly with plastic or nylon
tubing. For complete kit, specify entire part number as shown below:
UZ
PART
NO.
PK.
PARKER
PART
NO.
35223
1
SPV104C KIT
TUBE
SIZE
PIPE
THREAD
1/4
1/8
Angle Needle Valves
Compression to Male Pipe *Provided with Pin Handle
UZ
PART
NO.
31762
31763
31764
31765
PK.
PARKER
PART
NO.
1
NV104C-4-2* 1/4
1
NV104C-4-4
1/4
1/4
1.38
1.80
.93
.75
1
NV104C-5-2* 5/16
1/8
1.50
1.63
.88
.68
1
VV104C-6-4
1/4
1.38
1.76
.94
.81
TUBE
PIPE
SIZE THREAD
3/8
1/8
H
1.50
L
M
N
1.54
.88
.67
Needle Valves
UZ
PART
NO.
35224
35225
35226
PK.
PARKER
PART
NO.
TUBE
SIZE
1
NV105C-4*
1
1
H
L
M
1/4
1.50
1.41
1.75
NV105C-5*
5/16
1.50
1.35
1.73
NV105C-6
3/8
1.38
1.55
1.93
Compression to Compression *Provided with Pin Handle
Needle Valves
Compression to Male Pipe *Provided with Pin Handle
UZ
PART
NO.
31766
31767
31768
31769
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
1
NV106C-4-2*
1/4
1/8
1
NV106C-4-4*
1/4
1/4
1.50
1.40
1.55
1
NV106C-5-2*
5/16
1/8
1.50
1.35
1.50
1
NV106C-6-4
3/8
1/4
1.38
1.56
1.75
H
1.50
L
M
1.41
1.53
749
Needle Valves
Male Pipe to Male Pipe *Provided with Pin Handle
UZ
PART
NO.
35227
35228
PK.
PARKER
PART
NO.
1
NV107P-2*
1/8
1
NV107P-4
1/4
PIPE
THREAD
H
L
M
1.50
1.35
1.25
1.38
1.54
1.65
L
M
Needle Valves
Female Pipe to Male Pipe *Provided with Pin Handle
UZ
PART
NO.
31770
31771
PK.
PARKER
PART
NO.
1
NV108P-2*
1/8
1.50
1.36
1.25
1
NV108P-4
1/4
1.38
1.56
1.61
PIPE
THREAD
H
Needle Valves
Female Pipe to Female Pipe *Provided with Pin Handle
UZ
PART
NO.
35229
35230
PK.
PARKER
PART
NO.
1
NV109P-2*
1/8
1
NV109P-4
1/4
PIPE
THREAD
H
L
M
1.50
1.35
1.25
1.38
1.53
1.62
Needle Valves
Poly-Tite to Male Pipe
Temperature Range: 0° to +150°F
UZ
PART
NO.
35231
35232
35233
PK.
PARKER
PART
NO.
1
NV311P-4-2
1/4
1/8
1
NV311P-4-4
1/4
1
NV311P-6-4
3/8
TUBE
PIPE
SIZE THREAD
H
L
M
N
1.07
1.17
.50
.63
1/4
1.07
1.18
.50
.72
1/4
1.07
1.19
.56
.72
L
M
N
Angle Needle Valves
Poly-Tite to Male Pipe
Temperature Range: 0° to +150°F
UZ
PART
NO.
35234
35235
35236
750
PK.
PARKER
PART
NO.
1
NV312P-4-2
1/4
1/8
1.07
1.53
.48
.68
1
NV312P-4-4
1/4
1/4
1.07
1.72
.56
.86
1
NV312P-6-4
3/8
1/4
1.07
1.68
.64
.86
TUBE
PIPE
SIZE THREAD
H
Truck Valves
Hose to Male Pipe
UZ
PART
NO.
31772
31773
PK.
PARKER
PART
NO.
HOSE
I.D.
PIPE
THREAD
FLOW
L
M
N
1
V404P-6-6
3/8
3/8
.281
2.35 1.36
.94
1
V404P-10-6
5/8
3/8
.406
2.75 1.31
1.15
HOSE
I.D.
PIPE
THREAD
FLOW
5/8
3/8
.406
HOSE
I.D.
PIPE
THREAD
FLOW
Truck Valve
Hose to Male Pipe with Pin Handle
UZ
PART
NO.
35237
PK.
1
PARKER
PART
NO.
V404PH-10-6
L
M
N
2.47 1.31
1.09
Truck Valves
Hose to Male Pipe
UZ
PART
NO.
L
M
N
1
SV404P-10-8
5/8
1/2
.468
3.71 2.31
1.34
1
SV404P-12-6
3/4
3/8
.438
3.73 2.31
1.34
1
SV404P-12-8
3/4
1/2
.562
3.73 2.31
1.34
31774
32099
31775
PK.
PARKER
PART
NO.
Truck Valves
Female Pipe to Male Pipe
UZ
PART
NO.
35238
35239
35240
PK.
PARKER
PART
NO.
FEMALE
PIPE
THREAD
MALE
PIPE
THREAD
FLOW
L
M
1
V405P-6-6
3/8
3/8
.406
2.72
.91
1.19
1
V405P-6-8
3/8
1/2
.406
2.95
.91
1.31
1
V405P-8-8
1/2
1/2
.562
3.15
1.17
1.34
TUBE
SIZE
PIPE
THREAD
FLOW
L
M
1/2
1/2
.328
3.28
1.15
N
Truck Valve
Tube to Male Pipe
UZ
PART
NO.
PK.
PARKER
PART
NO.
35241
1
V408NTA-8-8
N
1.19
751
Truck Valves
Flare to Male Pipe
UZ
PART
NO.
32100
35242
35243
32101
PK.
PARKER
PART
NO.
TUBE
SIZE
PIPE
THREAD
FLOW
L
M
N
1
V409F-8-6
1/2
3/8
.406
3.07
1.31
1.00
1
V409F-8-8
1/2
1/2
.406
3.28
1.31
1.19
1
V409F10-8
5/8
1/2
.500
3.47
1.50
1.25
1
V409F-12-8
3/4
1/2
.562
3.70
2.31
1.34
TUBE
SIZE
PIPE
THREAD
FLOW
L
M
N
1/2
1/2
.328
3.58
1.38
1.31
TUBE
SIZE
PIPE
THREAD
FLOW
L
M
N
5/8
1/2
.500
3.60
1.38
1.31
Truck Valve
Tube to Male Pipe
UZ
PART
NO.
35244
PK.
1
PARKER
PART
NO.
V410NTA-8-8
Truck Valve
Tube to Male Pipe
UZ
PART
NO.
35245
752
PK.
1
PARKER
PART
NO.
V412F-10-8
Drain Cocks / Ground Plug Shutoff Cocks
Drain Cock Advantages
Both external-seat and internal-seat drain cocks are manufactured to the highest quality standards. Hand-tightening provides a metal-tometal seal.
Ground Plug Shutoff Cock Advantages
These economical valves are available in several styles. Brass castings or forged bodies for extra strength.
Applications
Manufactured for use with low pressure air, water, gas and
certain other fluids.
(Note: lubricant may not be compatible with some fluids, contact
factory for special fluid requirements.)
Pressure Ranges
System temperature and the type of tubing used should be
considered. Ground plug shutoffs are designed to withstand 30 PSI
working pressure. Drain cocks are designed to withstand
150 PSI working pressure, except where noted. See specific part
number for temperature range.
Nomenclature
and size of the fittings. The first series of numbers and letters identifies the style and type fitting. The second series of numbers
describes the size.
604
-2
EXAMPLE: V
204
Valve
Flared to Male Pipe
Flared
1/4" (4/16) Tube O.D.
F
-4
-2
EXAMPLE:
DC
Drain Cock
External Seat
Sizes
the tube O.D.
753
Brass Shutoff Cocks
Flare to Flare
UZ
PART
NO.
35246
PK.
1
PARKER
PART
NO.
TUBE
SIZE
L
M
FLOW
DIA. D
3/8
1.88
2.13
.250
V201F-6-6
Ground Plug Shutoff Cocks
Flare to Flare
UZ
PART
NO.
35248
35249
PK.
PARKER
PART
NO.
TUBE
SIZE
L
M
FLOW
DIA. D
1
V203F-6-6
3/8
2.26
2.14
.220
1
V203F-8-8
1/2
2.26
2.42
.281
Flare to Male Pipe
Temperature Range: +32° to +125°F
UZ
PART
NO.
35250
35251
PK.
PARKER
PART
NO.
1
V204F-4-2
1/4
1/8
1
V204F-6-4
3/8
1/4
TUBE
SIZE
PIPE
THREAD
M
FLOW
DIA. D
1.88
2.08
.180
2.27
2.05
.218
L
Compression to Compression
UZ
PART
NO.
35252
35253
PK.
PARKER
PART
NO.
TUBE
SIZE
L
M
FLOW
DIA. D
1
V303C-4-4
1/4
1.88
2.33
.188
1
V303C-6-6
3/8
2.26
2.45
.218
Compression to Male Pipe
UZ
PART
NO.
35254
35255
35256
754
PK.
PARKER
PART
NO.
1
V304C-4-2
1/4
1/8
1
V304C-4-4
1/4
1
V304C-6-4
3/8
TUBE
SIZE
PIPE
THREAD
L
M
FLOW
DIA. D
1.90
2.29
.188
1/4
1.90
2.15
.188
1/4
1.83
2.24
.218
Male Pipe to Male Pipe
UZ
PART
NO.
35257
35258
PK.
PARKER
PART
NO.
1
1
PIPE
THREAD
L
M
FLOW
DIA. D
V401P-2-2
1/8
1.90
2.25
.188
V401P-4-4
1/4
1.90
1.98
.188
Female Pipe to Male Pipe
UZ
PART
NO.
31776
31777
31778
PK.
PARKER
PART
NO.
1
FEMALE PIPE
THREAD
PIPE
THREAD
L
M
FLOW
DIA. D
V402P-2-2
1/8
1/8
1.89
1.73
.218
1
V402P-4-4
1/4
1/4
1.89
1.85
.218
1
V402P-6-6
3/8
3/8
2.34
2.21
.245
L
M
Female Pipe to Female Pipe
NO.
PK.
PARKER
PART
NO.
31779
31780
31781
1
V403P-2-2
1/8
1.90
1.51
.188
1
V403P-4-4
1/4
1.90
1.65
.188
1
V403P-6-6*
3/8
2.25
2.00
.250
FEMALE PIPE
THREAD
FLOW
DIA. D
UZ
PART
*Made from extruded bar stock
Three-Way Valve
Female Pipe three ends
UZ
PART
NO.
PK.
PARKER
PART
NO.
31782
1
V406P-4
PIPE
THREAD
1/4
L
FLOW
DIA. D
3.10
.281
L
FLOW
DIA. D
3.30
.281
Four-Way Valve
Female Pipe four ends
UZ
PART
NO.
PK.
PARKER
PART
NO.
31783
1
V407P-4
PIPE
THREAD
1/4
755
Drain Cocks
UZ
PART
NO.
31784
31785
31786
35259
PK.
PARKER
PART
NO.
PIPE
THREAD
L
M
FLOW
DIA. D
1
DC601-2
1/8
1.90
1.40
.170
1
DC601-4
1/4
1.90
1.52
.170
1
DC601-6
3/8
2.26
1.74
.281
1
DC601-8
1/2
2.29
1.82
.281
PIPE
THREAD
L
M
FLOW
DIA. D
1/4
1.41
1.73
.188
Drain Cock
UZ
PART
NO.
PK.
PARKER
PART
NO.
35260
1
DCR601-4
Internal Seal Drain Cocks
UZ
PART
NO.
31787
31788
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
M
5
DC602-2
1/8
13/32
.92
1.25
5
DC602-4
1/4
9/16
.94
1.25
Internal Seal Heavy Duty Cocks
UZ
PART
NO.
31789
31790
31791
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
M
5
DC603-2
1/8
1/2
1.41
1.00
5
DC603-4
1/4
5/8
1.54
1.16
5
DC603-6
3/8
11/16
1.63
1.16
External Seal Drain Cocks
UZ
PART
NO.
31792
31793
31794
756
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
M
5
DC604-2
1/8
7/16
.85
1.25
5
DC604-4
1/4
9/16
1.00
1.38
5
DC604-6
3/8
11/16
1.22
1.68
Drain Cocks / Drain Valves
External Seal Drain Cock
UZ
PART
NO.
31795
PK.
PARKER
PART
NO.
PIPE
THREAD
C
HEX
L
M
5
DC606-4
1/4-18
9/16
1.50
1.38
Bib Drain Valve
UZ
PART
NO.
31796
PK.
PARKER
PART
NO.
HOSE
SIZE
PIPE
THREAD
FLOW
L
1
DC607-4
3/8
1/4
.31
1.32
M
N
.67 .71
Air Tank Drain Valve
• Pull cable sideways
PART #
1421-60
1421-7
DESCRIPTION
1/4 MPT AIR TANK VALVE W/ 60" CABLE
1/4 MPT AIR TANK VALVE W/ 7" CABLE
QTY
2
1
757
Brass Garden Hose Fittings
Advantages
All fitting pipe threads are made to Dryseal standards. Connectors, unions, nuts and extruded elbows and tees are machined from CA
360 and CA 345 brass.
Nomenclature
Pressure Ranges
describes the size.
From +35°F. to +100°F. at 75 PSI maximum or the recommended
working pressure of garden hose. (not to exceed 150 PSI.)
Note: 90GH series is intended for use with 97HC hose clamp or
crimped ferrule.
EXAMPLE:
Garden Hose
Swivel Connector
3/8" Tube O.D.
3/4" Hose Thread
Note: All female connector ends should have a rubber washer
31745 (901GH-12) inserted prior to usage.
50GH
Swivel Connectors SAE Flare to Female Hose Thread
UZ
PART
NO.
31719
31720
PK.
PARKER
PART
NO.
TUBE
SIZE
HOSE
THREAD
L
M
2
50GHSV-6-12
3/8
3/4
1.25
1.15
.297
2
50GHSV-8-12
1/2
3/4
1.34
1.15
.406
FLOW
DIA. D
Hose Barbs to Male Hose Thread
UZ
PART
NO.
32103
31884
31886
PK.
PARKER
PART
NO.
1
53GH-8-12
1/2
3/4
1-1/16
1.88
.375
1
54GH-10-12
5/8
3/4
1-1/16
1.88
.500
1
55GH-12-12
3/4
3/4
1-1/16
1.88
.625
PIPE
THREAD
C
HEX
L
FLOW
DIA. D
I.D. HOSE
SIZE
HOSE
THREAD
C
HEX
L
FLOW
DIA. D
Male Hose to Male Pipe
UZ
PART
NO.
31722
31723
31724
PK.
PARKER
PART
NO.
2
69GH-12-6
3/4
3/8
1-1/16
1.25
.406
2
70GH-12-8
3/4
1/2
1-1/16
1.39
.531
2
71GH-12-12
3/4
3/4
1-1/16
1.41
.750
HOSE
THREAD
Male Hose to Male Hose
UZ
PART
NO.
31725
758
PK.
PARKER
PART
NO.
HOSE
THREAD
C
HEX
L
FLOW
DIA. D
2
75GH-12
3/4
1-1/16
1.25
.750
SV
-6
-12
Male Hose to Female Pipe
UZ
PART
NO.
31726
31727
31728
31729
PK.
PARKER
PART
NO.
2
2
2
80GH-12-8
2
81GH-12-12
HOSE
THREAD
PIPE
THREAD
C
HEX
L
FLOW
DIA. D
78GH-12-4
3/4
1/4
1-1/16
.75
.422
79GH-12-6
3/4
3/8
1-1/16
.75
.562
3/4
1/2
1-1/16
.75
.687
3/4
3/4
1-3/16 1.28
.719
Female Hose to Male Pipe
UZ
PART
NO.
31730
31731
PK.
PARKER
PART
NO.
2
2
HOSE
THREAD
PIPE
THREAD
C
HEX
82GH-12-8
3/4
1/2
1-3/16 1.20
.562
83GH-12-12
3/4
3/4
1-3/16 1.22
.750
L
FLOW
DIA. D
Swivel Connectors Female Garden Hose to Male Pipe
UZ
PART
NO.
HOSE
THREAD
PIPE
THREAD
C
HEX
L
FLOW
DIA. D
2
88GH-12-4
3/4
1/4
1.60
1.15
.312
2
88GH-12-6
3/4
3/8
1.54
1.15
.406
31732
31733
PARKER
PART
PK. NO.
Swivel Connectors Female Garden Hose to Hose Barb
UZ
PART
NO.
32104
31734
31735
31736
31885
31887
PK.
PARKER
PART
NO.
2
90GH-12-3
HOSE
THREAD
I.D. HOSE
SIZE
L
M
FLOW
DIA. D
3/4
3/16
1.29
1.15
.125
2
90GH-12-4
3/4
1/4
1.21
1.15
.187
2
90GH-12-6
3/4
3/8
1.21
1.15
.281
2
90GH-12-8
3/4
1/2
1.21
1.15
.375
1
90GH-12-10
3/4
5/8
1.93
1.19
.500
1
90GH-12-12
3/4
3/4
1.93
1.19
.625
PK.
PARKER
PART
NO.
HOSE
THREAD
L
M
FLOW
DIA. D
2
94GH-12
3/4
.57
1.15
.808
Knurled Hose Nut
UZ
PART
NO.
31737
759
Hose Nut Reducer
UZ
PART
NO.
PK.
PARKER
PART
NO.
31738
2
95GH-12-2
HOSE
THREAD
PIPE
THREAD
C
HEX
L
1/8
1-1/8
.63
3/4
Hose Cap Nut
UZ
PART
NO.
31739
PK.
PARKER
PART
NO.
HOSE
THREAD
L
M
2
96GH-12
3/4
.50
1.15
Female Hose to Female Pipe
UZ
PART
NO.
31740
31741
PK.
PARKER
PART
NO.
2
2
HOSE
THREAD
PIPE
THREAD
C
HEX
L
M
FLOW
DIA. D
98GH-12-8
3/4
1/2
1-3/16
1.14
1.01
.687
99GH-12-12
3/4
3/4
1-3/16
1.25
1.17
.750
Swivel Connectors Female Hose to Female Pipe
UZ
PART
NO.
PK.
PARKER
PART
NO.
HOSE
THREAD
31742 2317423331
31742
2
31743
2
99GHSV-12-12
PIPE
THREAD
C
HEX
L
M
FLOW
DIA.
98GHSV-12-8
3/4
1/2
1
1.27
1.21
3/4
3/4
1-3/16
1.34
1.21
.687
.687
Swivel Connector
UZ
PART
NO.
31744
PK.
2
PARKER
PART
NO.
HOSE
THREAD
101GHSV-12
3/4
L
M
FLOW
DIA. D
1.25
1.15
.625
Rubber Garden Hose Coupling Washer
UZ
PART
NO.
PK.
PARKER
PART
NO.
31745
10
901GH-12
HOSE
THREAD
3/4
NOTE: All female connector ends should
have this rubber washer installed prior to usage.
760
Water and Air Hose
Reinforced 100% Rubber Water Hose
•
•
•
•
•
•
•
•
•
•
All rubber cover.
Black cover.
Resists heat, wear, and abrasion.
High burst strength, unaffected by nozzle shutoffs.
Fitted with heavy duty, solid brass coupling.
Special tube construction withstands prolonged hot water use of 160° F.
Available in 25' and 50' lengths.
Limited oil resistance.
Suitable for general water pressure (100 PSI).
EPDM tube and cover.
I.D.
UZ PART NUMBER
LENGTH
39415
39417
39416
5/8"
5/8"
3/4"
50'
25'
50'
Heavy-Duty Industrial Air Hose
A quality, general service hose.
Tough cover resists abrasion, cracking and weather checking.
Four- spiral reinforcement helps maintain flexibility, even in extreme temperatures.
EPDM tube and cover.
Color red.
Working pressure: 300 lbs.
Male pipe fitting on each end.
Not for fuel handling.
I.D.
UZ PART NUMBER
1/4"
3/8"
39405
P53497
LENGTH
UZ PART NUMBER
25'
25'
39400
39401
•
•
•
•
•
•
•
•
LENGTH
50'
50'
Rubber Hose Repair Kit
UZ PART NUMBER
P78584
P78585
FITS
1/4" N.P.T. x 1/4" I.D.
3/8" N.P.T. x 3/8" I.D.
Rubber Hose Splicer Kit
PART NUMBER
P78582
P78583
FITS
1/4" I.D. Hose
3/8" I.D. Hose
761
Flexilla Water Hose/Tubing Tools
Flexzilla Water Hose
Premium Hybrid Polymer Water Hose
•
•
•
•
•
•
•
•
•
Extreme all-weather flexibility (-40º to 150º F Ambient)
No memory - lays flat
Abrasion resistant
Crush resistant nickel plated male & female fittings
Rugged bend restrictors
3/4 in. - 11 1/2 GHT fittings
Lightweight
Coils easily
Internal kink resistant rib
UZ PART#
123553
123554
PRODUCT DESCRIPTION
Flexzilla Water Hose 5/8" x 50'
Flexzilla Water Hose 5/8" x 100'
QTY
1
1
Copper Tube Brush
Inside / Outside - Clean it the right way.
The problem with most multi-purpose tools is that they don’t work as well as individual
ones. The UZ Copper Tube Brush is the exception to the rule. The secret behind its success
is that it has been specifically engineered with all of the features and benefits of the
individual tools it replaces.
• No need to carry sheets or rolls of sandpaper and emery cloth. Carry the Copper Tube Brush instead.
• One tool cleans both the inside and the outside of the copper tube. This unique design is not only
efficient, but also ensures complete coverage cleaning.
• Easy to use. Simply slip the Copper Tube Brush onto the pipe, twist the brush around the tube and
the job is finished. This simple approach easily outperforms traditional means in all areas of comparison.
• The end result is a surface that is clean and polished.The optimum environment for superior solder flow.
• The Copper Tube Brush is engineered to work on both 1/2” and 3/4” copper tubing. This feature
improves efficiency on the job by eliminating the search for the “right brush”.
• Constructed from heavy-duty plastic for years of solid performance, the Copper Tube Brush is light
weight and comfortable to use.
Copper Tube Brush
PART NUMBER
70469
Replacement Brushes
PART NUMBER
91837 (4pc. set)
762
Tubing Tools
Shut-Off Tool
For Soft Copper Tubing.
UZ PART NUMBER
91822
91851
SIZE
small
large
In every physical plant, hospital, hotel, or school, plumbing malfunction and emergencies arise. In most cases these
situations require that the water supply be shut off, in many cases far from the repair. Unfortunately, shutting off the water
supply may result in an adverse effect elsewhere in the building, down time and inconvenience. The Shut-Off Tool is the
answer to this problem. It cuts off the water supply at the repair, then re-configures the pipe to “turn on” the water supply after
the repair is made. This indispensable tool pays for itself time and time again.
• Works on popular, soft and rigid copper pipes.
• L, M, or K grades.
• Comes complete with socket, ratchet, holding clamp and tool box.
• Easily “restores” water flow after the repair is complete.
• Comes with easy-to-follow directions.
• Constructed of high quality materials for that solid tool feel.
• UZ Part Number 91822 Handles soft copper pipe from 1/2” to 1”.
• UZ Part Number 91851 Handles soft copper pipe from 1-1/4” to 2”.
• Weighs only 12 lbs., for easy maneuvering and ease of operation.
Holding Clamp for Small Tool
UZ PART NUMBER
103073
Holding Clamp for Large Tool
UZ PART NUMBER
103074
763
Tubing Tools
Shut-Off, Hold, Restore Flow.
TO SHUT OFF FLOW:
Place tool over tube, swing
dies onto guides rods and latch.
In cramped working areas,
tool handle may be
repostioned as required.
Use ratchet to compress
Shut-off dies. Use only
sufficient compression
to stop flow. Watertight
closure is maintained
while tool is on tube.
TO RESTORE FLOW:
Remove tool and rotate
90°. Reattach tool so that
reforming dies are properly
located around flattened
tube edges.
Use ratchet to compress
reforming dies. Die shape
will prevent over-forming
and fatiguing of walls
as flow within tube
is restored.
Loss of head is no more than through a 90° elbow!
Test flow and prove it yourself!
Original Tube OD
Original Tube OD
Diagram of
Compressed Tube
Diagram of
Restored Tube
ABOVE: Diagram and photo of compressed tube illustrate
tube profile when flow is shut off. Water-tight closure is
maintained while the tool remains on the tube. A holding clamp
may be substituted if the Shut-off Tool is needed elsewhere.
HOLDING CLAMP
If water-tight shut-off is required after tool is
removed, use a holding clamp on the tubing in
place of the tool. Tighten with wrench or
pliers. The holding clamp will keep the flow
stopped until removed.
Rolo-flair®
For soft metal tubing.
Precision burnished 45° flares in tube sizes from 1/8" O.D. to 3/4" O.D.
with an easy turn of the handle. For copper and aluminum alloy.
UZ PART NUMBER
100437
764
PACK
1
ABOVE: Diagram and photo of reformed tube illustrates
tube profile when flow is restored. Our exclusive reforming dies
prevent flattened tube edges from overworking and cracking.
The resulting short restriction delivers full line capacity while
tube retains original strength.
Tubing Tools
45° Flaring Tool
For soft copper, aluminum and brass tubing. Economical and fast
operating. Swivel type, hard chrome-finished cone assures smooth flares.
UZ PART NUMBER
PACK
100434
1
Double 45° Flaring Tool
Recommended for brazed or welded soft steel tubing (wall thickness
to .035"). Also makes double flares in soft copper or aluminum tubing.
Forged steel yoke; swivel type hard chrome-finished flaring cone.
UZ PART NUMBER
PACK
100436
1
Deburring Tool
A quick twist of the wrist will deburr either the O.D. or the I.D. of the
tube end. Can be used on annealed steel, stainless steel, copper and
aluminum. For tube sizes 2(1/8”O.D.) to 26 (1-5/8” O.D.). Insert tube
into the convexed end of the Deburring Tool for inside deburring and
the opposite end for outside deburring. Rotate in either direction.
UZ PART NUMBER
PACK
100445
1
Tube Cutter
UZ PART NUMBER
100443
PACK
LENGTH
1
For hard or soft copper, aluminum, brass, thin wall steel, stainless steel,
monel, titanium and other metal tubing. For 1/8" to 1-1/8" O.D. tubing.
Rollers have flare cut-off groove, fold away reamer and spare cutting wheel.
WEIGHT
5"
6 oz.
Plastic Tube Cutter
May be used with polyethylene, polypropylene, nylon and other
thermoplastic tubing. For O.D. sizes 1/8" to 1/2".
UZ PART NUMBER
100444
PACK
1
Spring Tube Bender
Tool allows hand bending of soft tubing to any shape without collapsing
walls. Special spring steel, nickel finished. End belled for quick tube removal.
UZ PART NUMBER
100438
100439
100440
100441
100442
PACK
O.D.
(in.)
LENGTH
(in.)
1
1/4
10
1
5/16
10
1
3/8
10
1
1/2
12
1
5/8
12
765
Tubing Tools
Ratchet - Cut
Tube and pipe cutters
The solution for cutting pipe in tight confines
UZ PART NUMBER
70470 (Large)
70471 (Small)
SIZE
5/16 to 1-1/8
8mm to 28.5
APPLICATION
Air Conditioning, HVAC, Aviation,
Electrical, Plumbing
1/8 to 3/8
3mm to 9.5
Fuel Lines, Brake Lines, Vacuum Lines
91835
Replacement Blade for Large Ratchet Cutter (#70470)
91836
Replacement Blade for Small Ratchet Cutter (#70471)
Ratchet - Cut Combo 112954
1 Large #70470 and 1 Small #70471
The RATCHET-CUT tool incorporates the same principle that standard ratchet wrenches operate under. This feature eliminates the need to spin
the pipe cutting tool all the way around the pipe. Simply maneuver the RATCHET-CUT back and forth across the pipe to get the job done
quickly and easily.
FEATURES
• Compact design
• Simple to operate
• Super sharp blade
• Manufactured from modern,
high tech materials
• Quality construction
766
BENEFITS
Slips in and out of tight spaces
making the job go faster and
smoother.
The RATCHET-CUT can be
positioned on the pipe in seconds.
Cuts copper, brass, aluminum,
stainless steel, plastic and P.V.C.
The RATCHET- CUT delivers
precision cutting in a lightweight
design.
Makes the RATCHET-CUT a tool
that will be used year af ter year.
Blow Guns
Blow Guns
Meet OSHA requirements (section 29 CFR 1910.242 paragraph b),and directive #100-1. "Compressed air shall not be used for cleaning purposes
except where reduced to less than 30 PSI, and then only with effective chipguarding and personal protective equipment."
Palm Switch™ Blow Gun
• All metal construction with rubber over-molded trigger
• Ergonomic grip reduces hand fatigue
• Venturi nozzle for accelerated air flow
• 1/4" FNPT inlet
UZ PART #
QUANTITY
122324
1
Air Guard Blow Gun
• Unique protective air shield emits a secondary cone of air to prevent chip fly-back
• Wide comfort trigger
• Delivers high thrust with pinpoint accuracy
• Durable cast aluminum body
• 1/4" FNPT inlet
UZ PART #
QUANTITY
122325
1
Whisper Noise Reduction Blow Gun
• Whisper jet nozzle reduces noise up to 20 dBA over conventional blow guns
• Solid conical tip design prevents blockage of nozzle
• Wide comfort trigger
• 1/4" FNPT inlet
UZ PART #
QUANTITY
122326
1
Long John® Safety Blow Gun
PART#
*122327
*122328
*122329
*122330
*122331
*122332
*122333
DESCRIPTION
• All aluminum construction
• Venturi nozzle for accelerated blow flow
• 1/4" FNPT inlet
QTY.
Long John Safety Blow Gun w/6" Extension
1
1
1
1
1
1
1
*Denotes non-stock item
Cyclone™ 6 Pc. Blow Gun Kit
Features:
Kit Includes:
• Meets OSHA standards
• High volume
• Ergonomic comfort grip
• 6 in. Extension
• Quiet-Flo™ Safety Nozzle
• Tri-Thrust™ Safety Nozzle
• Xtreme-Flo™ Safety Nozzle
• Chip Guard
• Cyclone™ F3 Blow Gun
PART#
DESCRIPTION
QTY.
983330
Cyclone Extreme Air Gun Kit
1
767
Flexilla®
Flexzilla
The Monster Air Hose
The new FLEXZILLA® hose is made from an engineered hybrid polymer, combining the best qualities of both PVC and rubber
materials, and being superior to both.
Extreme Flexibility:
Made from an engineered hybrid polymer, FLEXZILLA® provides superior all-weather flexibility even in freezing temperatures!
• Excellent abrasion resistance
• Reinforced bend restrictor
• 300 PSI working pressure
• Superior bend radius
• Temperature range: ( -40° to 150° F )
• Lightweight and easy to handle
• Standard Male NPT end fittings
Superior Bend
Radius
UZ PART #
120233
120234
7802130
7805926
PRODUCT DESCRIPTION
Flexzilla Air Hose 3/8” x 25 ft.
FITTING SIZE
1/4” MNPT
1/4” MNPT
1/4” MNPT
3/8” MNPT
COLOR
Neon Green
Neon Green
Neon Green
Neon Green
Zilla Whip™
• Increases longevity of the main hose
• Reduces user fatigue by eliminating weight of coupler/plug
• Ball swivel increases mobility in tight work spaces
PART#
983322
983323
983324
768
DESCRIPTION
Zilla Whip 3/8x2' Ball Swivel Whip Hose
QTY.
1
1
1
QTY
1
1
1
1
WEIGHT
2.63 lbs
5.26 lbs
10.52 lbs
6.06 lbs
Flexzilla®
Bulk Flexzilla
• 250 ft. air hose spool
• 300 PSI
• Temp. range -40° to 150°F
PART#
7803434
983321
983325
983326
983328
983329
983327
DESCRIPTION
Flexzilla Air Hose 3/8" x 250'
Flexzilla Air Hose 1/2" x 250'
Male Hose Barb 3/8"H x 1/4" NPT
Male Hose Barb 1/2"H x 3/8" NPT
Brass Ferrule for 3/8" Hose
Brass Ferrule for 1/2" Hose
Hose Crimper W/1/4, 3/8 & 1/2" Dies
00337
00336
Flexzilla Air Hose 3/8" Kit
Flexzilla Air Hose 1/2" Kit
QTY.
1
1
5
5
10
10
1
1
1
*Kits contain hose, male hose barbs, brass fittings & a crimper.
Ferrule
Hose Barb Insert
Crimper & Dies
Hose Protectors
Hose Protectors are durable wear shields made of an abrasion resistant material.
Easily attached to almost any size or type of hose, it prevents up to 90% of all failure
due to wear at points of contact. With an extremely high wear factor and a wide range
of operating temperatures (-40° to 430° F) the Hose Protector provides protection in
a variety of applications.
•
•
•
•
•
•
•
•
Features:
Hydraulic Hoses
Wiring Harness
Brake Systems
Fuel Lines
Air Lines
Radiator Hoses
Oil Lines
Battery Cables
PART #
HP4-Y
HP6-Y
HP8-Y
DESCRIPTION
4" Yellow Hose Protector
•
•
•
•
•
•
QUANTITY
10
10
10
•
Market Applications:
Extremely high wear factor
Formulated to resist solvents, oils,
grease, gasoline, etc.
3 grooves protect cable ties
and prevent slipping
Operating temperature
range is -40° to 430°F
Exceptionally cost effective
Easy installation in minutesno need to remove hose
Available in 3 sizes 4", 6" and 8" - cable ties included
•
•
•
•
•
•
•
•
•
•
Agricultural
Industrial
Trucking
Mining
Construction
Aviation Support
Public Transportation
Road Maintenance
Waste Management
Original Equipment Manufacturer
Available in
an Assortment
PART # 00325
Found on Page xxx
769
Abrasion Protection For:
Safety Couplers
Specifications for C9000 Safety Couplers
Fluids: Compressed Air
Body Material: Nylon 6.6
Seal: Nitrile
Pressure Rating: 1-230 PSI
Temperature Rating: -4°F to +140°F
Thread Sizes: 1/4" to 1/2"
Thread Types: NPT
Industrial Applications: C9000 is used for any application (assembly, construction, air craft industry,
automotive) where safety, durability, and performance are demanded.
Tube O.D.
1/4
1/4
3/8
3/8
Body
1/4
1/4
3/8
Male NPT Straight Body
Industrial Interchange Profile
Part No.
Vendor No.
QTY
116287
9405U06 14
1
*116288
9405U06 18
6
116349
9405U08 18
1
*116188
9405U08 22
6
Thread
1/4
3/8
3/8
1/2
Tube O.D.
1/4
3/8
3/8
Part No.
*116350
*116351
*116352
Female NPT Straight Body
Industrial Interchang Profile
Part No.
Vendor No.
116289
9415U06 14
*116347
9415U06 18
*116348
9415U08 18
*116189
9415U08 22
Barbed Connector Body
Vendor No.
9421U06 06
9421U06 10
9421U08 10
QTY
1
6
1
6
QTY
6
6
6
Body
1/4
1/4
3/8
3/8
Thread
1/4
3/8
1/4
3/8
Body
Tube O.D.
1/4
1/4
1/4
3/8
Male Straight Plug
Part No.
Vendor No.
9084 23 14
*116353
9084 23 18
*116354
9084 30 14
*116355
9084 30 18
*116356
Part No.
*116361
*116362
770
QTY
10
10
10
10
Female Straight Plug
Part No.
Vendor No.
9083 23 14
*116357
9083 23 18
*116358
9083 30 14
*116359
*116360
9083 30 18
Barbed Connector Plug
Vendor No.
9085 23 56
9085 23 60
QTY
10
10
QTY
10
10
10
10
Quick Couplers
Interchange/Match-Up Chart
Popular Coupling Designs
The actual size nipple chart below can be used to help select couplings that will interchange with specific nipple designs and sizes.
Industrial Style Interchange
1/2" Body Size
3/8" Body Size
1/4" Body Size
3/8" Body Size
1/4" Body Size
Tru-Flate Style Interchange
1/2" Body Size
ARO 210 Style Interchange
1/4" Body Size
771
Quick Couplers
Universal 1/4" Quick Couplers
Solves the problem of not having the right coupler for the job. Compatible with 3 popular plug styles...
1/4" Size Universal
Quick Coupler
1/4" Size Plugs
Tru-Flate
Interchange
Mates with Three Styles
of Quick Disconnect Plug
Nose Configurations
•
•
•
•
Saves time searching for correct coupler.
Reduces inventory.
Identified by 3 rings on sleeve.
Simple, one hand, push-to-connect design provides
instantaneous connections.
• Sleeve guard prevents accidental disconnection.
• Pressure rating is 150 PSI connected and disconnected.
• Flow capacities.
Industrial
Interchange
CV
ARO 210
Interchange
Socket End
SocketSleeve
AC
1.1
28
ARO 210 Interchange
1.4
35
Tru-Flate Interchange
1.4
35
Industrial Interchange
Socket
Valve
Seal
Socket Valve
Socket Body
Socket Sleeve Spring
Available in
an Assortment
PART #123832
Found on Page xxx
772
Socket Locking Balls
Specifications
PART DESCRIPTION
STANDARD MATERIAL
Socket End
Brass
Socket Body & Sleeve
Steel (Cadmium Plated)
Socket Sleeve Spring
Stainless Steel (302)
Socket Valve Spring
Stainless Steel (302)
Socket Valve
Zinc Alloy
Socket & Valve Seals
Buna-N (-40°F to +160°F)
Socket Locking Balls
Stainless Steel
Quick Couplers
Universal Quick Couplers - 1/4" Nominal
Female End Connection
Female Pipe Thread
QTY.
BODY
SIZE
THREAD
SIZE
FPT
DIMENSIONS (in.)
OVERALL
LENGTH (A)
HEX
SIZE (B)
40432
1
1/4"
1/4-18
2.13
0.81
0.94
40434
1
1/4"
3/8-18
2.13
0.81
0.94
UZ PART
NUMBER
C
LARGEST
DIA. (C)
A
B
Male End Connection
Male Pipe Thread
QTY.
BODY
SIZE
THREAD
SIZE
FPT
DIMENSIONS (in.)
OVERALL
LENGTH (A)
HEX
SIZE (B)
LARGEST
DIA. (C)
40433
1
1/4"
1/4-18
2.27
0.81
0.94
40435
1
1/4"
3/8-18
2.27
0.81
0.94
QTY.
BODY
SIZE
THREAD
SIZE
FPT
DIMENSIONS (in.)
OVERALL
LENGTH (A)
HEX
SIZE (B)
40436
1
1/4"
1/4
2.87
0.81
0.94
40437
1
1/4"
3/8
2.87
0.81
0.94
C
UZ PART
NUMBER
A
B
Hose Stem End Connection
Standard Hose Barb
UZ PART
NUMBER
C
LARGEST
DIA. (C)
A
B
773
Quick Couplers
Industrial Interchange Couplers
Industrial interchange nipples manufactured
by Parker and other manufacturers.
1. Precision machining, hardened wear points and solid barstock
construction provide long life even in rugged applications.
2. Tubular valve with large flow passages delivers high air flow
with minimal pressure drop for efficient per formance. The
tubular design provides 360° support for both the valve seal
and the mating nipple for long service life.
3. Precision molded seals form a bubble tight seal for reliable
operation within rated working pressures.
4. Proven ball locking mechanism (with large numbers of
hardened steel or stainless steel locking balls) evenly distributes
load to resist wear and provide positive connections. The ball
locking mechanism also provides accurate alignment and
allows a swiveling action to reduce hose torque.
5. Integral sleeve guard protects the sleeve and resists accidental
disconnects by allowing the coupling to ride over
obstructions without the sleeve ring retracting.
6. Knurling and/or grooves on sleeve provide a gripping surface
for ease of operation.
Operation
•Sleeve type couplings are widely used to connect air and low pressure fluid lines.
•Their compact and economical design uses a ball locking mechanism consisting of
captive balls that engage the locking groove on the mating nipple.
•The sliding spring loaded sleeve on the coupler must be manually retracted in order to connect or disconnect the nipple.
It is easy to do, but two hands are normally required.
Common Applications
• Compressed Air, Water, Grease, Paint, Limited Vacuum, Limited Gases.
774
Quick Couplers
Industrial Interchange Couplers
Specifications
BODY SIZE
1/4
3/8
1/2
Rated Pressure (PSI)
300
300
300
Temperature Range
-40° to 250°F
-40° to 250°F
-40° to 250°F
Locking Device
4 balls
8 balls
8 balls
27.4
27.4
27.4
Vacuum Data (inches Hg)
Disconnected (coupler only)
Not Recommended
Connected
Female Pipe Thread
UZ PART NO.
BRASS
1/4
40029
3/8
—
1/2
—
UZ PART NO.
STEEL
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH (A)
DIMENSION (in.)
HEX SIZE (B)
LARGEST
DIAMETER(C)
—
1
1/4-18
1.83
0.75
0.88
40030
40031
1
3/8-18
2.28
0.88
1.06
1
1/2-14
2.96
1.00
1.19
BODY
SIZE (in)
Male Pipe Thread
BODY
SIZE (in)
UZ PART NO.
BRASS
1/4
40032
3/8
—
1/2
—
UZ PART NO.
STEEL
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH (A)
DIMENSION (in.)
HEX SIZE (B)
—
1
1/4-18
2.05
0.75
40033
40034
1
3/8-18
2.39
0.88
1.06
1
1/4-14
3.08
1.00
1.19
LARGEST
DIAMETER(C)
0.88
775
Quick Couplers
High Flow Industrial Interchange Couplers
•Offers an alternative to traditional industrial interchange couplers.
•Quality and durability are combined with a slim profile and push-to-connect design.
•Easy to use general purpose pneumatic coupler for use in a variety of applications.
Specifications
BODY SIZE
1/4
300
Temperature Range
-40° to +250° F
Locking Device
4 balls
Not Recommended
Connected
27.4
Female Pipe Thread
BODY
SIZE (in.)
UZ PART NO.
STEEL
1/4
40015
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH(A)
DIMENSION (in.)
HEX SIZE (B)
1
1/4-1/8
2.18
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH(A)
DIMENSION (in.)
HEX SIZE (B)
LARGEST
DIAMETER (C)
1/4-18
2.36
0.81
0.99
0.81
LARGEST
DIAMETER (C)
0.99
Male Pipe Thread
776
BODY
SIZE (in.)
UZ PART NO.
STEEL
1/4
40016
1
Quick Couplers
Industrial Interchange Nipples
• Interchangeable with similar nipples manufactured by Parker and other quick coupling manufacturers. Conform to MIL-C4109 or
ANSI/(NFPA) T3.20. 14-1990 requirements.
• Hardened wear points and solid barstock construction provide long service life.
• Precision machined surfaces and hardened load-bearing areas resist the effects of mechanical shock in the most rugged applications.
Female Pipe Thread
BODY
SIZE (in.)
UZ PART NO. PK
STEEL
QTY
THREAD
SIZE NPTF
1/4
40044
40045
40046
1
3/8
1/2
OVERALL
LENGTH (D)
DIMENSION (in.)
EXPOSED
HEX
LENGTH (E)
SIZE (F)
LARGEST
DIAMETER (G)
1/4-18
1.56
0.80
0.62
0.72
1
3/8-18
1.69
0.74
0.81
0.94
1
1/2-14
2.25
1.01
1.00
1.16
Male Pipe Thread
BODY
SIZE (in.)
1/4
3/8
1/2
UZ PART NO.
STEEL
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH (D)
DIMENSION (in.)
EXPOSED
HEX
SIZE (F)
LENGTH (E)
LARGEST
DIAMETER (G)
40047
40048
40049
1
1/4-18
1.72
0.95
0.56
0.65
1
1
3/8-18
1.91
0.96
0.69
0.80
1/2-14
2.48
1.22
0.88
1.01
Standard Hose Barb
BODY
SIZE (in.)
UZ PART NO.
STEEL
PK
QTY
HOSE I.D.
OVERALL
LENGTH (D)
LENGTH (E)
1/4
40050
40051
1
1/4-18
2.09
1.33
0.55
1
3/8-18
2.19
1.24
0.62
3/8
DIMENSION (in.)
EXPOSED
LARGEST
DIAMETER (G)
777
Quick Couplers
Tru-Flate Style Couplers
• The original Tru-Flate design.
• This unique design has been field proven as a long lasting, high performance coupling especially when used with pneumatic tools.
• Standard Seal is Buna-N (Nitrile).
Specifications
BODY SIZE
1/4
3/8
1/2
300
300
300
Temperature Range
-40° to +250° F
-40° to +250° F
-40° to +250° F
Locking Device
4 balls
8 balls
8 balls
27.4
27.4
Not Recommended
Connected
27.4
Female Pipe Thread
BODY
SIZE (in.)
UZ PART NO.
BRASS
1/4
40000
40001
40002
3/8
1/2
PK
QTY
SIZE NPTF
DIMENSION (in.)
OVERALL LENGTH (A)
HEX
SIZE (B)
LARGEST
DIAMETER (C)
1
1/4-18
1.83
0.75
0.88
1
3/8-18
2.28
0.88
1.06
1
1/2-14
2.96
1.00
1.19
Male Pipe Thread
BODY
SIZE (in.)
1/4
3/8
1/2
778
UZ PART NO.
BRASS
STEEL
40003UZ
40004
40023
PK
QTY
SIZE NPTF
1
1/4-18
2.05
0.75
0.88
1
3/8-18
2.39
0.88
1.06
1
1/2-14
3.08
1.00
1.19
DIAMETER (in.)
OVERALL LENGTH (A)
HEX
SIZE (B)
LARGEST
DIAMETER (C)
Quick Couplers
Tru-Flate Style Nipples
Female Pipe Thread
BODY
SIZE (in.)
UZ PART NO.
STEEL
1/4
40014
40020
40022
3/8
1/2
OVERALL
LENGTH (E)
DIMENSION (in.)
EXPOSED
LENGTH (E)
HEX
SIZE (F)
LARGEST
DIAMETER (G)
PK
QTY
NPTF
1
1/4-18
1.47
0.74
0.62
0.72
1
3/8-18
1.68
0.77
0.81
0.94
1
1/2-14
2.27
1.05
1.00
1.16
PK
QTY
NPTF
OVERALL
LENGTH (E)
DIMENSION (in.)
EXPOSED
LENGTH (E)
HEX
SIZE (F)
Male Pipe Thread
UZ PART NO.
STEEL
1/4
1
1/4-18
1.62
0.89
0.56
0.65
3/8
40017
40018
1
3/8-18
1.90
0.98
0.69
0.80
1/2
40019
1
1/2-14
2.48
1.27
0.88
1.01
LARGEST
DIAMETER (G)
BODY
SIZE (in.)
779
Quick Couplers
ARO 210 Style Couplers
• Has a full opening tubular valve for maximum flow and
a built-in sleeve guard to minimize accidental disconnects.
• Seal material is nitrile.
• Only available in 1/4" body size.
• All brass body with steel valves.
Specifications
BODY SIZE
1/4
300
Temperature Range
-40° to +250° F
Locking Device
4 balls
Female Pipe Thread
BODY
SIZE (in.)
UZ PART NO
BRASS
1/4
40041
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH (A)
DIMENSION(in.)
HEX SIZE(B)
LARGEST
DIAMETER(C)
1
1/4-18
1.86
0.75
0.88
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH (A)
DIMENSION(in.)
HEX SIZE(B)
LARGEST
DIAMETER(C)
2.08
0.75
0.88
Male Pipe Thread
BODY
SIZE (in)
UZ PART NO
BRASS
1/4
40042
1
1/4-18
ARO 210 Style Nipples
Female Pipe Thread
BODY
SIZE(in)
UZ PART NO.
STEEL
1/4
40057
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH (D)
1
1/4-18
1.47
PK
QTY
THREAD
SIZE NPTF
OVERALL
LENGTH (D)
1
1/4-18
DIMENSION (in.)
HEX SIZE (F)
0.62
LARGEST
DIAMETER (G)
0.72
EXPOSED
LENGTH (E)
0.66
Male Pipe Thread
780
BODY
SIZE (in)
UZ PART NO.
STEEL
1/4
40058
1.62
DIMENSION(in.)
HEX SIZE (F)
0.56
LARGEST
DIAMETER (G)
0.65
EXPOSED
LENGTH (E)
0.56
Malleable Iron Fittings
• Black type conform to ANSI Spec. B 16.14.
• Pressure ratings of 150 PSI.
• Mill traceable quality control.
• Exacting quality standards for thread gauge accuracy.
45° Elbows
90° Elbows
UZ PART #
MAL. IRON
20001
20002
20003
20004
20005
20006UZ
20007
20008
20009
25000
25001
QTY.
10
10
10
10
5
5
2
2
2
2
2
UZ PART #
QTY.
SIZE GALV. IRON
1/8"
MM64-100 3
3
1/4" MM64-101
3
3/8" MM64-102
3
1/2" MM64-103
3
3/4" MM64-104
3
1"
MM64-105
2
1-1/4" MM64-106
1
1-1/2" MM64-107
1
2"
MM64-108
1
2-1/2" MM64-109
1
3"
MM64-110
20021UZ
20022
20023
20024
20025
20026
20027UZ
20028
20029
25004UZ
25005UZ
QTY.
3
3
3
3
3
3
1
1
1
1
1
UZ PART #
MAL. IRON
UZ PART #
SIZE GALV. IRON
1/8" MM64-160
1/4" MM64-161
3/8" MM64-162
1/2" MM64-163
3/4" MM64-164
1"
MM64-165
1-1/4" MM64-166
1-1/2" MM64-167
2"
MM64-168
2-1/2" MM64-169
3"
MM64-170
UZ PART #
SIZE GALV. IRON
1/8" MM64-180
1/4" MM64-181
3/8" MM64-182
1/2" MM64-183
3/4" MM64-184
1"
MM64-185
1-1/4" MM64-186
1-1/2" MM64-187
2"
MM64-188
2-1/2" MM64-189
MM64-190
3"
45° Street Elbows
90° Street Elbows
QTY.
10
10
10
10
5
5
2
2
2
2
2
UZ PART #
MAL. IRON QTY.
10
20011
10
20012UZ
10
20013
10
20014
5
20015UZ
5
20016
2
20017
2
20018UZ
2
20019
2
25002
2
25003UZ
QTY.
3
3
3
3
3
2
1
1
1
1
1
UZ PART #
MAL. IRON QTY.
10
20031
10
20032
10
20033UZ
10
20034
5
20035
5
20036UZ
2
20037
2
20038
2
20039
Available in
an Assortment
UZ PART #
SIZE GALV. IRON QTY.
1/8" MM64-200
2
1/4" MM64-201
2
3/8" MM64-202
2
1/2" MM64-203
2
3/4" MM64-204
2
1"
MM64-205 2
1-1/4" MM64-206
1
1-1/2" MM64-207
1
2"
MM64-208 1
PART #00978
PART #00983
Found on Page 672
Found on Page 673
PART #00979
PART #00984
Found on Page 671
Found on Page 673
PART #00980
PART #00985
Found on Page 671
Found on Page 673
781
Tees
Caps
UZ PART #
MAL. IRON QTY.
20041
10
20042UZ
10
20043
10
20044UZ
10
20045UZ
10
20046
5
20047
2
20048
2
20049
2
25006
2
25007
2
UZ PART #
SIZE GALV. IRON
1/8" MM64-250
1/4" MM64-251
3/8" MM64-252
1/2" MM64-253
3/4" MM64-254
1"
MM64-255
1-1/4" MM64-256
1-1/2" MM64-257
2"
MM64-258
2-1/2" MM64-259
3"
MM64-260
QTY.
2
2
2
2
2
2
1
1
1
1
1
UZ PART #
SIZE GALV. IRON QTY.
1/8"
MM66-470 5
1/4" MM66-471
5
3/8" MM64-472
5
1/2" MM64-473
5
3/4" MM64-474
5
1"
MM64-475
3
1-1/4" MM64-476
2
1-1/2" MM64-477
2
2"
MM64-478
2
2-1/2" MM64-479
1
3"
MM64-480
1
Standard Merchant Couplings
Banded Couplings
UZ PART #
MAL. IRON QTY.
20061
5
20062
5
20063UZ
5
20064
5
20065
10
20066
2
20067
1
20068
1
20069
1
25010
1
25011
1
UZ PART #
MAL. IRON QTY.
20051UZ
5
20052
5
20053
5
20054
5
20055
10
20056UZ
2
20057
1
20058
1
20059
1
25008
1
25009
1
UZ PART #
SIZE GALV. IRON
1/8" MM64-770
1/4" MM64-771
3/8" MM64-772
1/2" MM64-773
3/4" MM64-774
1"
MM64-775
1-1/4" MM64-776
1-1/2" MM64-777
2"
MM64-778
2-1/2" MM64-779
3"
MM64-780
QTY.
3
3
3
3
3
2
2
1
1
1
1
Square Head Plugs
UZ PART #
MAL. IRON QTY.
20
20091
20
20092
20
20093UZ
10
20094
10
20095
10
20096
10
20097
10
20098
10
20099
10
25014
10
25015
782
UZ PART #
MAL. IRON QTY.
20071
10
20072
10
20073
10
20074
10
20075
5
20076
5
20077
2
20078
2
20079
2
25012
1
25013
1
SIZE
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
UZ PART #
GALV. IRON
MM66-670
MM66-671
MM66-672
MM64-653
MM64-654
MM64-655
MM64-656
MM64-657
MM64-658
MM64-659
MM64-660
UZ PART #
SIZE GALV. IRON
1/8"
MM64-410
1/4" MM64-411
3/8" MM64-412
1/2" MM64-413
3/4" MM64-414
1"
MM64-415
1-1/4" MM64-416
1-1/2" MM64-417
2"
MM64-418
2-1/2" MM64-419
3"
MM64-420
QTY.
3
3
3
3
3
2
2
1
1
1
1
Countersunk Plugs
QTY.
5
5
5
5
3
3
2
2
1
1
1
UZ PART #
MAL. IRON QTY.
120207
10
120208
10
120209
10
20104
10
20105UZ
10
20106
5
20107
5
20108
5
20109UZ
5
SIZE
1/8”
1/4”
3/8”
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
UZ PART #
GALV. IRON
MM66-630
MM66-631
MM66-632
MM66-633
MM66-634
MM66-635
QTY.
10
10
10
5
5
2
Hex Bushings
UZ PART #
UZ PART #
MAL. IRON QTY.
SIZE
GALV. IRON QTY.
3
20111
1/4" x 1/8" MM64-430
10
3
20112UZ
3/8" x 1/8" MM64-431
10
3
20113
3/8" x 1/4" MM64-432
10
3
20114
1/2" x 1/4" MM64-434
10
3
20115UZ
1/2" x 3/8" MM64-435
10
3
3/4" x 1/4" MM64-436
5
223106
3
3/4" x 3/8" MM64-437
10
20116
3
3/4" x 1/2" MM64-438
10
20117
1" x 1/2"
5
MM64-441 2
20118
1" x 3/4"
5
MM64-442 2
20119UZ
1
1-1/4" x 3/4" MM64-445
2
20120
1
1-1/4" x 1" MM64-446
2
20121
1
1-1/2" x 1" MM64-449
2
20122UZ
1
2 1-1/2" x 1-1/4" MM64-450
20123UZ
2" x 1"
1
MM64-452 1
223115
1
2" x 1-1/4" MM64-453
2
20124
1
2" x 1-1/2" MM64-454
2
20125
1
2 2-1/2" x 1-1/2" MM64-461
25016
1
2-1/2" x 2" MM64-462
2
25017
3" x 2"
2
MM64-456 1
25018
1
3" x 2-1/2" MM64-463
2
25019UZ
UZ PART #
MAL. IRON QTY.
SIZE
20131
1/4" x 1/8"
10
20132
3/8" x 1/8"
10
20133
3/8" x 1/4"
10
223083
1/2" x 1/8"
5
20134UZ
1/2" x 1/4"
10
1/2" x 3/8"
10
20135
223086
3/4" x 1/4"
5
20136
3/4" x 3/8"
5
20137
3/4" x 1/2"
5
20138UZ
1" x 1/2"
5
20139
1" x 3/4"
5
1-1/4" x 1/2"
223091
3
1-1/4" x 3/4"
20140
5
1-1/4" x 1"
20141UZ
2
1-1/2" x 1/2"
223094
3
223095
3 1-1/2" x 1-3/4"
1-1/2" x 1"
20142
2
20143UZ
2 1-1/2" x 1-1/4"
2" x 3/4"
223098
2
2" x 1"
223099
2
2" x 1-1/4"
20144
1
2" x 1-1/2"
20145
1
25022UZ
1 2-1/2" x 1-1/2"
2-1/2" x 2"
25023
1
3" x 2"
25024UZ
1
3" x 2-1/2"
25025
1
UZ PART #
GALV. IRON
MM66-500
MM66-501
MM66-502
MM64-503
MM66-504
MM64-505
MM64-507
MM64-508
MM64-509
MM64-512
MM64-513
MM64-516
MM64-517
MM64-518
MM64-521
MM64-522
MM64-523
MM64-524
MM64-525
MM64-529
MM64-530
MM64-531
MM64-534
MM64-535
MM64-538
MM64-539
QTY.
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reducing Couplings
Unions Ground Joint 150 LBS.
UZ PART #
MAL. IRON QTY.
20251
5
20252
5
20253
5
20254
5
20255
2
20256
2
20257
2
20258
2
20259
2
25020UZ
2
25021UZ
2
UZ PART #
SIZE GALV. IRON
1/8" MM64-600
1/4" MM64-601
3/8" MM64-602
1/2" MM64-603
3/4" MM64-604
1"
MM64-605
1-1/4" MM64-606
1-1/2" MM64-607
2"
MM64-608
2-1/2" MM64-609
3"
MM64-610
QTY.
1
1
1
1
1
1
1
1
1
1
1
783
Steel Pipe Nipples
Steel Pipe Nipples
• Manufactured from new, and mill tested pipe.
• Meets ASTM A-53, A-733 & ANSI B1.20.1 for treading, dimensions and pipe specifications. Galvanized meets ASTM A-123.
• Exacting quality control for true thread gauge, inside ream and chamfer.
• UZ pipe nipples are completely cleaned and rust protected after machining.
1/4 Inch Diameter
1/8 Inch Diameter
UZ PART #
MAL. IRON QTY.
20150UZ
10
20151
10
20152
10
20153
10
20154
10
20155UZ
10
20156
10
20157
10
20158
10
20159UZ
10
20160
10
SIZE
close
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4-1/2"
5"
5-1/2"
6"
UZ PART #
GALV. IRON
MM56-001
MM56-002
MM56-003
MM56-004
MM56-005
MM56-006
MM56-007
MM56-008
MM56-009
MM56-010
MM56-011
QTY.
5
5
5
5
5
5
3
3
2
2
2
784
UZ PART #
SIZE GALV. IRON
close MM56-040
1-1/2" MM56-041
2"
MM56-042
2-1/2" MM56-043
3"
MM56-044
3-1/2" MM56-045
4"
MM56-046
4-1/2" MM56-047
5"
MM56-048
5-1/2" MM56-049
6"
MM56-050
UZ PART #
SIZE GALV. IRON
close MM56-020
1-1/2" MM56-021
2"
MM56-022
2-1/2" MM56-023
3"
MM56-024
3-1/2" MM56-025
4"
MM56-026
4-1/2" MM56-027
5"
MM56-028
5-1/2" MM56-029
6"
MM56-030
QTY.
5
5
5
5
2
2
2
2
2
2
2
1/2 Inch Diameter
3/8 Inch Diameter
UZ PART #
MAL. IRON QTY.
20172UZ
10
20173UZ
10
20174UZ
10
20175UZ
10
20176UZ
10
20177
10
20178
10
20179
10
20180
10
20181
10
20182
10
UZ PART #
MAL. IRON QTY.
20161
10
20162
10
20163
10
20164
10
20165
10
20166
10
20167
10
20168
10
20169
10
20170
10
20171
10
QTY.
5
5
5
5
3
3
3
3
2
2
2
UZ PART #
MAL. IRON QTY.
20183
10
20184
10
20185
10
20186
10
20187
10
20188
10
20189
10
20190
10
20191
10
20192
10
20193
10
UZ PART #
SIZE GALV. IRON
close MM56-060
1-1/2" MM56-061
2"
MM56-062
2-1/2" MM56-063
3"
MM56-064
3-1/2" MM56-065
4"
MM56-066
4-1/2" MM56-067
5"
MM56-068
5-1/2" MM56-069
6"
MM56-070
QTY.
5
5
5
5
5
5
3
3
3
3
3
Steel Pipe Nipples
3/4 Inch Diameter
UZ PART #
MAL. IRON QTY.
20194
5
20195
5
20196
5
20197
5
20198
5
20199
5
20200
5
20201
5
20202
5
20203UZ
5
20204
5
SIZE
close
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4-1/2"
5"
5-1/2"
6"
UZ PART #
GALV. IRON
MM56-080
MM56-081
MM56-082
MM56-083
MM56-084
MM56-085
MM56-086
MM56-087
MM56-088
MM56-089
MM56-090
1 Inch Diameter
QTY.
5
5
5
5
5
5
5
3
3
3
3
MM56-120
MM56-121
MM56-122
MM56-123
MM56-124
MM56-125
MM56-127
MM56-028
MM56-029
QTY.
5
5
5
3
3
3
2
2
2
QTY.
3
3
3
3
2
2
2
2
2
UZ PART #
MAL. IRON QTY.
20225
2
20226
2
20227
2
20228
2
20229
2
20230
2
20231
2
20232
2
20233
2
20234
2
UZ PART #
SIZE GALV. IRON
close MM56-140
2"
MM56-141
2-1/2" MM56-142
3"
MM56-143
3-1/2" MM56-144
4"
MM56-145
4-1/2" MM56-146
5"
MM56-147
5-1/2" MM56-148
6"
MM56-149
QTY.
2
2
2
2
2
2
1
1
1
1
SIZE
close
2"
2-1/2"
3"
3-1/2"
4"
5"
5-1/2"
6"
UZ PART #
GALV. IRON
UZ PART #
SIZE GALV. IRON
close MM56-100
2"
MM56-101
2-1/2" MM56-102
3"
MM56-103
3-1/2" MM56-104
4"
MM56-105
5"
MM56-107
5-1/2" MM56-108
6"
MM56-109
1-1/2 Inch Diameter
1-1/4 Inch Diameter
UZ PART #
MAL. IRON QTY.
20215
2
20216
2
20217
2
20218
2
20219
2
20220
2
20222
2
20223
2
20224
2
UZ PART #
MAL. IRON QTY.
20205UZ
5
20206
5
20207
5
20208
5
20209
5
20210
5
20212
5
20213
5
20214
5
2 Inch Diameter
Available in
an Assortment
PART #00981
Found on Page 671
PART #00982
Found on Page 672
PART #00986
Found on Page 674
PART #00987
Found on Page 674
UZ PART #
MAL. IRON QTY.
20235
2
20236
2
20237
2
20238
2
20239
2
20240
2
20241
2
20242
2
20243
2
UZ PART #
SIZE GALV. IRON
close MM56-160
2-1/2" MM56-161
3"
MM56-162
3-1/2" MM56-163
4"
MM56-164
4-1/2" MM56-165
5"
MM56-166
5-1/2" MM56-167
6"
MM56-168
QTY.
2
2
2
1
1
1
1
1
1
785
Black Pipe - Schedule 80
Schedule 80 Black Pipe Fittings
300 LB BLACK PIPE FITTINGS
REDUCING COUPLINGS
90 DEGREE ELBOWS
NO.
SIZE
QTY
109318
1/4
5
109319
3/8
5
109320
1/2
5
109321
3/4
4
109322
1
3
109323
1-1/4"
2
109324
1-1/2"
2
109325
2"
1
109326
2-1/2"
1
109327
3"
1
45 DEGREE ELBOWS
PKG
PKG
NO.
SIZE
QTY
109328
1/4
2
109329
3/8
2
109330
1/2
2
109331
3/4
2
109332
1
2
109333
1-1/4"
1
109334
1-1/2"
1
109335
2"
1
109336
2-1/2"
1
109337
3"
1
COUPLINGS
NO.
SIZE
PKG
QTY
109338
1/4
5
109339
3/8
5
109340
1/2
5
109341
3/4
5
109342
1
5
109343
1-1/4"
2
109344
1-1/2"
2
109345
2"
2
109346
2-1/2"
2
109347
3"
1
SIZE
1/2-1/4
109349
109350
1/2-3/8
3/4 X 3/8
2
2
109351
3/4 X 1/2
2
109352
1 X 1/2
2
1 X 3/4
2
109354
1-1/4 X 1/2
2
109355
1-1/4 X 3/4
1
109356
1-1/4 X 1
1
109357
1-1/2 X 1/2
1
109358
1-1/2 X 3/4
1
109359
1-1/2 X 1
1
109360
1-1/2 X 1-1/4
1
109361
2 X 1/2
1
109362
2 X 3/4
1
109363
2X1
1
109364
2 X 1-1/4
1
109365
2 X 1-1/2
1
109366
2-1/2 X 2
1
NO.
109367
CAPS
SIZE
1/4
PKG
QTY
5
109368
3/8
5
109369
1/2
4
109370
3/4
4
109371
1
2
109372
1-1/4"
2
109373
1-1/2"
1
109374
NO.
109375
2"
UNIONS
SIZE
1/8
1
PKG
QTY
2
109376
1/4
2
109377
3/8
2
109378
1/2
2
109379
3/4
2
109380
1
109381
1-1/4"
109382
1-1/2"
109384
QTY
2
109353
109383
786
PKG
NO.
109348
2"
2-1/2"
2
1
1
1
1
109385
3"
1
109386
4
1
Schedule 80 Black Pipe Fittings
90o STREET ELBOWS PKG
NO.
SIZE
QTY
109387
1/4
2
109388
3/8
2
109389
1/2
2
109390
3/4
2
109391
1
2
109392
1-1/4"
1
109393
1-1/2"
1
109394
2"
1
TEES
PKG
NO.
SIZE
QTY
109395
1/4
10
109396
3/8
10
109397
1/2
10
109398
3/4
10
109399
1
5
109400
1-1/4"
2
1-1/2"
2
2"
2
109403
2-1/2"
1
109404
3"
1
REDUCING TEES
NO.
109405
109401
109402
PKG
SIZE
QTY
3/4 X 1/2
1
109406
1 X 1/2
1
109407
1 X 3/4
1
109408
1-1/4 X 3/4
1
109409
1-1/4 X 1
1
109410
1-1/2 X 1
1
109411
1-1/2 X 1-1/4
1
109412
2 X 1-1/4
1
109413
2 X 1-1/2
1
787
SCHEDULE 80 STEEL NIPPLES
300 LB STEEL NIPPLES
788
1/8" DIA
109414
109415
109416
109417
109418
109419
109420
109421
109422
109423
109424
LENGTH
CLOSE
1-1/2
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
10
10
10
10
10
10
10
5
5
5
5
3/4"DIA
109447
109448
109449
109450
109451
109452
109453
109454
109455
109456
109457
LENGTH
CLOSE
1-1/2
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
10
10
10
10
10
10
10
10
5
5
5
1/4" DIA
109499
109500
109501
109502
109503
109504
109505
109506
109507
109508
109509
LENGTH
CLOSE
1-1/2
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
5
5
5
5
5
5
5
5
5
5
5
1" DIA
109458
109459
109460
109461
109462
109463
109464
109465
109466
109467
LENGTH
CLOSE
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
10
10
10
10
5
5
5
5
5
5
3/8" DIA
109425
109426
109427
109428
109429
109430
109431
109432
109433
109434
109435
LENGTH
CLOSE
1-1/2
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
5
5
5
5
5
5
5
5
5
5
5
1-1/4" DIA
109468
109469
109470
109471
109472
109473
109474
109475
109476
109477
LENGTH
CLOSE
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
5
5
5
5
5
5
5
5
5
5
1/2" DIA
109436
109437
109438
109439
109440
109441
109442
109443
109444
109445
109446
LENGTH
CLOSE
1-1/2
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
10
10
10
10
10
10
10
10
10
10
10
1-1/2" DIA
109478
109479
109480
109481
109482
109483
109484
109485
109486
109487
LENGTH
CLOSE
2
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
5
5
5
5
5
5
5
5
2
2
2" DIA
109488
109489
109490
109491
109492
109493
109494
109495
109496
LENGTH
CLOSE
2-1/2
3
3/1/2
4
4/1/2
5
5-1/2
6
QTY
2
2
2
2
2
2
2
2
2
Available in
an Assortment
PART #00415
Found on Page 670
SCHEDULE 80 BLACK PIPE FITTINGS
SCH 80 HEX BUSHINGS
SIZE
1/4 X 1/8
3/8 X 1/4
1/2X 1/4
1/2 X 3/8
3/4 X 1/4
3/4 X 1/2
3/4 X 3/8
1 X 1/4
1 X 3/8
1 X 1/2
1 X 3/4
1-1/4 X 3/4
1-1/4 X 1
1-1/2 X 3/4
1-1/2 X 1
1-1/2 X 1-1/4
2 X 1/2
2 X 3/4
2X1
2 X 1-1/4
2 X 1-1/2
2-1/2 X 1
2-1/2 X 2
3X1
3X2
3 X 2-1/2
4X1
4X2
4X3
QTY
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
2
2
2
2
2
1
1
1
1
1
1
1
1
PART #
111880
111881
111882
111883
111884
111885
111886
111887
111888
111889
111890
111891
111892
111893
111894
111895
111896
111897
111898
111899
111900
111906
111907
111908
111909
111910
111911
111912
111913
STREET ELBOWS 45 DEGREES
PART #
N/A
111942
111943
111944
111945
111946
111947
SIZE
1/4
1/2
3/4
1
1-1/4
1-1/2
2
QTY
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
QTY
20
20
20
20
10
10
5
5
2
1
1
1
1
1
1
1
1
1
STEEL HEX PLUGS
PART #
111914
111915
111916
111917
111918
111919
111920
111921
111922
111938
111939
111940
789
304 Stainless Steel Fittings
90 Degree Elbows
UZ PART #
MM62-100
MM62-101
MM62-102
MM62-103
MM62-104
MM62-105
MM62-106
MM62-107
MM62-108
MM62-109
MM62-110
MM62-112
QTY.
2
2
2
1
1
1
1
1
1
1
1
1
Tees
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
90 Degree Street Elbows
Crosses
UZ PART #
MM62-160
MM62-161
MM62-162
MM62-163
MM62-164
MM62-165
MM62-166
MM62-167
MM62-168
UZ PART #
MM62-391
MM62-392
MM62-393
MM62-394
MM62-395
MM62-396
MM62-397
MM62-398
QTY
1
1
1
1
1
1
1
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
45 Degree Elbows
UZ PART #
MM62-180
MM62-181
MM62-182
MM62-183
MM62-184
MM62-185
MM62-186
MM62-187
MM62-188
790
UZ PART #
MM62-250
MM62-251
MM62-252
MM62-253
MM62-254
MM62-255
MM62-256
MM62-257
MM62-258
MM62-260
QTY
1
1
1
1
1
1
1
1
1
QTY
1
1
1
1
1
1
1
1
1
1
QTY
1
1
1
1
1
1
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
3
SIZE
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
Stainless Steel OD
Machined Couplings
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
UZ PART #
MM62-410B
MM62-411B
MM62-412B
MM62-413B
MM62-414B
MM62-415B
MM62-416B
MM62-417B
MM62-418B
QTY
2
2
2
2
1
1
1
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
Couplings
UZ PART #
MM62-413
MM62-414
MM62-415
MM62-416
MM62-417
MM62-418
MM62-419
MM62-420
MM62-421
Caps
QTY
2
1
1
1
1
1
1
1
1
SIZE
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
UZ PART #
MM62-470
MM62-471
MM62-472
MM62-473
MM62-474
MM62-475
MM62-476
MM62-477
MM62-478
MM62-480
QTY
2
2
2
2
1
1
1
1
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
3
Reducing Couplings
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SIZE
1/4 X 1/8
3/8 X 1/8
3/8 X 1/4
1/2 X 1/8
1/2 X 1/4
1/2 X 3/8
3/4 X 1/8
3/4 X 1/4
3/4 X 3/8
3/4 X 1/2
1 X 3/8
1 X 1/2
1 X 3/4
1-1/4 X 3/4
1-1/4 X 1
1-1/2 X 1/2
1-1/2 X 3/4
1-1/2 X 1
1-1/2 X 1-1/4
2X1
2 X 1-1/4
2 X 1-1/2
UZ PART #
MM62-430
MM62-431
MM62-432
MM62-433
MM62-434
MM62-435
MM62-455
MM62-436
MM62-437
MM62-438
MM62-440
MM62-441
MM62-442
MM62-445
MM62-446
MM62-447
MM62-448
MM62-449
MM62-450
MM62-452
MM62-453
MM62-454
791
Hex Bushings
UZ PART #
MM62-500
MM62-502
MM62-503
MM62-504
MM62-505
MM62-508
MM62-509
MM62-512
MM62-513
MM62-517
MM62-518
MM62-521
MM62-522
MM62-532
MM62-524
MM62-527
MM62-528
MM62-529
MM62-530
MM62-531
MM62-534
MM62-535
MM62-538
MM62-539
MM62-543
Hex Head Plugs
QTY
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SIZE
1/4 X 1/8
3/8 X 1/4
1/2 X 1/8
1/2 X 1/4
1/2 X 3/8
3/4 X 3/8
3/4 X 1/2
1 X 1/2
1 X 3/4
1-1/4 X 3/4
1-1/4 X 1
1-1/2 X 1/2
1-1/2 X 3/4
1-1/2 X 1
1-1/2 X 1-1/4
2 X 1/2
2 X 3/4
2X1
2 X 1-1/4
2 X 1-1/2
2-1/2 X 1-1/2
2-1/2 X 2
3X2
3 X 2-1/2
4X3
QTY
1
1
1
1
1
1
1
1
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
3
Unions
UZ PART #
MM62-600
MM62-601
MM62-602
MM62-603
MM62-604
MM62-605
MM62-606
MM62-607
MM62-608
MM62-610
792
UZ PART #
MM62-630
MM62-631
MM62-632
MM62-633
MM62-634
MM62-635
MM62-636
MM62-637
MM62-638
QTY
2
2
2
2
1
1
1
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
Hex Nipples
UZ PART #
MM62-720
MM62-721
MM62-722
MM62-723
MM62-724
MM62-725
MM62-726
MM62-727
MM62-728
QTY
2
2
2
1
1
1
1
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
304 Stainless Steel Fittings/Pipe Nipples
Square Head Plugs
UZ PART #
MM62-670
MM62-671
MM62-672
MM62-653
MM62-654
QTY
2
2
2
1
1
SIZE
1/8
1/4
3/8
1/2
3/4
UZ PART #
MM62-655
MM62-656
MM62-657
MM62-658
MM62-660
QTY
1
1
1
1
1
SIZE
1
1-1/4
1-1/2
2
3
SIZE
1/4
3/8
1/2
3/4
UZ PART #
MM62-705
MM62-706
MM62-707
MM62-708
QTY
1
1
1
1
SIZE
1
1-1/4
1-1/2
2
UZ PART #
MM62-775
MM62-776
MM62-777
MM62-778
QTY
1
1
1
1
SIZE
1
1-1/4
1-1/2
2
Hex Locknuts
UZ PART #
MM62-701
MM62-702
MM62-703
MM62-704
QTY
2
2
2
2
Stainless Steel Half Couplings
UZ PART #
MM62-771
MM62-772
MM62-773
MM62-774
QTY
2
2
2
1
SIZE
1/4
3/8
1/2
3/4
STAINLESS STEEL NIPPLES
1/8" Diameter
UZ PART #
MM48-001
MM48-002
MM48-003
MM48-004
MM48-005
MM48-006
MM48-007
MM48-008
MM48-009
MM48-010
MM48-011
MM48-015
QTY
2
2
2
2
2
2
1
1
1
1
1
1
3/8" Diameter
LENGTH
X CLOSE (3/4)
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
10
UZ PART #
MM48-040
MM48-041
MM48-042
MM48-043
MM48-044
MM48-045
MM48-046
MM48-047
MM48-048
MM48-049
MM48-050
MM48-052
MM48-054
QTY
2
2
2
1
1
1
1
1
1
1
1
1
1
LENGTH
X CLOSE (1)
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
8
10
793
304 Stainless Steel Pipe Nipples
1/4" Diameter
UZ PART #
MM48-020
MM48-021
MM48-022
MM48-023
MM48-024
MM48-025
MM48-026
MM48-027
MM48-028
MM48-029
MM48-030
MM48-032
MM48-034
MM48-036
QTY
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1/2" Diameter
LENGTH
X CLOSE (7/8)
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
8
10
12
3/4" Diameter
UZ PART #
MM48-080
MM48-081
MM48-082
MM48-083
MM48-084
MM48-085
MM48-086
MM48-087
MM48-088
MM48-089
MM48-090
MM48-091
MM48-092
MM48-094
MM48-096
QTY
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
794
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
QTY
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
LENGTH
X CLOSE (1)
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
7
8
9
10
11
12
1-1/4" Diameter
LENGTH
X CLOSE (1-3/8)
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
7
8
10
12
1" Diameter
UZ PART #
MM48-100
MM48-101
MM48-102
MM48-103
MM48-104
MM48-105
MM48-106
MM48-107
MM48-108
MM48-109
MM48-110
MM48-111
MM48-113
UZ PART #
MM48-060
MM48-061
MM48-062
MM48-063
MM48-064
MM48-065
MM48-066
MM48-067
MM48-068
MM48-069
MM48-070
MM48-071
MM48-072
MM48-073
MM48-074
MM48-075
MM48-076
UZ PART #
MM48-120
MM48-121
MM48-122
MM48-123
MM48-124
MM48-125
MM48-126
MM48-127
MM48-128
MM48-129
MM48-131
MM48-135
QTY
1
1
1
1
1
1
1
1
1
1
1
1
LENGTH
X CLOSE (1-5/8)
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
8
12
1-1/2" Diameter
LENGTH
X CLOSE (1-1/2)
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
7
8
10
UZ PART #
MM48-140
MM48-141
MM48-142
MM48-143
MM48-144
MM48-145
MM48-146
MM48-147
MM48-148
MM48-149
MM48-151
MM48-152
QTY
1
1
1
1
1
1
1
1
1
1
1
1
LENGTH
X CLOSE (2)
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
8
9
304 Stainless Steel Pipe Nipples
2" Diameter
UZ PART #
MM48-160
MM48-161
MM48-162
MM48-163
MM48-164
MM48-165
MM48-166
MM48-167
MM48-168
MM48-169
MM48-170
MM48-171
MM48-172
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
3" Diameter
LENGTH
X CLOSE (2)
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
7
8
9
10
2-1/2" Diameter
UZ PART #
MM48-180
MM48-193
QTY
1
1
UZ PART #
MM48-200
MM48-201
MM48-203
MM48-205
MM48-207
MM48-209
MM48-213
QTY
1
1
1
1
1
1
1
LENGTH
X CLOSE (2-5/8)
3
4
5
6
8
12
4" Diameter
LENGTH
X CLOSE (2-1/2)
12
UZ PART #
MM48-220
MM48-227
QTY
1
1
LENGTH
X CLOSE (2-7/8)
6
795
Copper Sweat Fittings
90° Long Radius Elbows
Copper to Copper
TUBE SIZE
NOMINAL (Plumbing)
ACTUAL SIZE (Industrial)
5/8 x 5/8
1/2 x 1/2
7/8 x 7/8
3/4 x 3/4
UZ PART #
QTY.
26047UZ
26048UZ
5
2
90° Elbows Male
Copper to Male
• Cast
TUBE SIZE
ACTUAL SIZE (Plumbing)
TUBE SIZE
NOMINAL (Plumbing)
1/2
5/8
1/2
3/4
7/8
3/4
PIPE SIZE (Industrial)
UZ PART #
QTY.
26059
26060
5
90° Elbows Female
Female to Copper
PIPE SIZE
TUBE SIZE
TUBE SIZE
NOMINAL (Plumbing)
1/2
5/8
1/2
3/8
5/8
1/2
3/4
7/8
3/4
UZ PART #
QTY.
26056
26057
26058
5
5
5
90° Elbows
Copper to Copper
TUBE SIZE
TUBE SIZE
NOMINAL (Plumbing)
3/8 x 3/8
1/4 x 1/4
1/2 x 1/2
3/8 x 3/8
5/8 x 5/8
1/2 x 1/2
5/8 x 1/2
1/2 x 3/8
3/4 x 3/4
5/8 x 5/8
7/8 x 7/8
3/4 x 3/4
7/8 x 5/8
3/4 x 1/2
1-1/8 x 1-1/8
1-1/7 x 7/8
1x1
1 x 3/4
1-3/8 x 1-3/8
1-1/4 x 1-1/4
1-5/8 x 1-5/8
1-1/2 x 1-1/2
2-1/8 x 2-1/8
2x2
796
UZ PART #
QTY.
26165
26166
26167
26168
26169
26170
26171
26172
26173
26174
26175
26177
10
10
10
5
5
5
2
2
2
2
2
2
5
90° Fitting Elbows
Fitting to Copper
TUBE SIZE
TUBE SIZE
NOMINAL (Plumbing)
UZ PART #
QTY.
10
1-1/8 x 1-1/8
1x1
1-3/8 x 1-3/8
1-1/4 x 1-1/4
1-5/8 x 1-5/8
1-1/2 x 1- 1/2
2-1/8 x 2-1/8
2x2
26178
26179
26180
26181
26182
26183
26184
TUBE SIZE
NOMINAL (Plumbing)
UZ PART #
QTY.
5
1/2 x 1/2
3/8 x 3/8
5/8 x 5/8
1/2 x 1/2
7/8 x 7/8
3/4 x 3/4
10
5
2
2
2
1
45° Elbows
Copper to Copper
TUBE SIZE
1-1/8x 1-1/8
1x1
1-3/8 x 1-3/8
1-1/4 x 1-1/4
1-5/8 x 1-5/8
1-1/2 x 1-1/2
2-1/8 x 2-1/8
2x2
26140
26142
26144
26145
26146
26147
26150
26152
26153
26154
TUBE SIZE
NOMINAL (Plumbing)
UZ PART #
QTY.
26156
26157
26158
26159
26160
26161
26162
26163
26164
5
1/8 x 1/8
3/8 x 3/8
1/4 x 1/4
1/2 x 1/2
3/8 x 3/8
5/8 x 5/8
1/2 x 1/2
3/4 x 3/4
5/8 x 5/8
7/8 x 7/8
3/4 x 3/4
5
5
2
2
2
1/4 x 1/4
2
2
2
2
45° Fitting Elbows
Fitting to Copper
TUBE SIZE
3/8 x 3/8
1/4 x 1/4
1/2 x 1/2
3/8 x 3/8
5/8 x 5/8
1/2 x 1/2
3/4 x 3/4
5/8 x 5/8
7/8 x 7/8
3/4 x 3/4
1-1/8 x 1-1/8
1x1
1-3/8 x 1-3/8
1-1/4 x 1-1/4
1-5/8 x 1-5/8
1-1/2 x 1-1/2
2-1/8 x 2-1/8
2x2
5
5
2
2
2
2
2
2
797
Couplings with Stop
Copper to Copper
TUBE SIZE
1/4 x 1/4
1/8 x 1/8
1/4 x 5/16
1/8 x 3/16
5/16 x 5/16
3/16 x 3/16
3/8 x 3/8
1/4 x 1/4
3/8 x 1/4
1/4 x 1/8
1/2 x 1/2
3/8 x 3/8
1/2 x 1/4
3/8 x 1/8
1/2 x 3/8
3/8 x 1/4
5/8 x 5/8
1/2 x 1/2
5/8 x 3/8
1/2 x 1/4
5/8 x 1/2
1/2 x 3/8
3/4 x 3/4
5/8 x 5/8
3/4 x 3/8
5/8 x 1/4
3/4 x 1/2
5/8 x 3/8
3/4 x 5/8
5/8 x 1/2
7/8 x 7/8
3/4 x 3/4
7/8 x 3/8
3/4 x 1/4
7/8 x 1/2
3/4 x 3/8
7/8 x 5/8
3/4 x 1/2
7/8 x 3/4
3/4 x 5/8
1x1
7/8 x 7/8
1-1/8 x 1-1/8
1x1
1-1/8 x 1/2
1 x 3/8
1-1/8 x 5/8
1 x 1/2
1-1/8 x 3/4
1 x 5/8
1-1/8 x 7/8
1-3/8 x 1-3/8
798
TUBE SIZE
NOMINAL (Plumbing)
1 x 3/4
1-1/4 x 1-1/4
1-3/8 x 5/8
1-1/4 x 1/2
1-3/8 x 7/8
1-1/4 x 3/4
1-3/8 x 1-1/8
1-1/4 x 1
1-5/8 x 1-5/8
1-1/2 x 1-1/2
1-5/8 x 5/8
1-1/2 x 1/2
1-5/8 x 7/8
1-1/2 x 3/4
1-5/8 x 1-1/8
1-1/2 x 1
1-5/8 x 1-3/8
1-1/2 x 1-1/4
PART #
26000UZ
26001UZ
26002
26003
26005
26008UZ
26009
26010UZ
26012
26013UZ
26014UZ
26015UZ
26016UZ
26017UZ
26018UZ
26019UZ
26020
26021
26022UZ
26023UZ
26024UZ
26025UZ
26026UZ
26027
26028UZ
26029UZ
26031UZ
26032UZ
26034
26035UZ
26036
26037UZ
26038UZ
26039UZ
26040UZ
QTY.
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Couplings with Stop
Copper to Copper
TUBE SIZE
2-1/8 x 2-1/8
TUBE SIZE
NOMINAL (Plumbing)
2x2
2-1/8 x 5/8
2 x 1/2
2-1/8 x 7/8
2 x 3/4
2-1/8 x 1-1/8
2x1
2-1/8 x 1-3/8
2 x 1-1/4
2-1/8 x 1-5/8
2 x 1-1/2
UZ PART #
QTY.
26041
26042
26043UZ
26044
26045UZ
26046UZ
1
UZ PART #
QTY.
26110
26112
26113
26114
26115
26116
26117
26118
26119
26120
26121
26122
26123
26124
26125
26126
26127
26128
26129
26130
26131
26132
26133
26134
26135
5
1
1
1
1
1
Tees
Copper to Copper to Copper
TUBE SIZE
TUBE SIZE
NOMINAL (Plumbing)
1/8 x 1/8 x 1/8
1/4 x 1/4 x 1/4
1/2 x 1/2 x 1/2
3/8 x 3/8 x 3/8
5/8 x 5/8 x 5/8
1/2 x 1/2 x 1/2
5/8 x 5/8 x 1/2
1/2 x 1/2 x 3/8
5/8 x 5/8 x 7/8
1/2 x 1/2 x 3/4
3/4 x 3/4 x 3/4
5/8 x 5/8 x 5/8
7/8 x 7/8 x 7/8
3/4 x 3/4 x 3/4
7/8 x 5/8 x 5/8
3/4 x 1/2 x 1/2
7/8 x 5/8 x 7/8
3/4 x 1/2 x 3/4
7/8 x 7/8 x 1/2
3/4 x 3/4 x 3/8
7/8 x 7/8 x 5/8
1-1/8 x 1-1/8 x 1-1/8
3/4 x 3/4x 1/2
1x1x1
1-1/8 x 5/8 x 5/8
1 x 1/2 x 1/2
1-1/8 x 5/8 x 7/8
1 x 1/2 x 3/4
1-1/8 x 5/8 x 1-1/8
1-1/8 x 7/8 x 5/8
1 x 1/2 x 1
1 x 3/4 x 1/2
1-1/8 x 7/8 x 1-1/8
1 x 3/4 x 1
1-1/8 x 1-1/8 x 5/8
1 x 1 x 1/2
1-1/8 x 1-1/8 x 7/8
1 x 1 x 3/4
1-3/8 x 1-3/8 x 1-3/8
1-1/4 x 1-1/4 x 1-1/4
1-3/8 x 1-3/8 x 1-7/8
1-1/4 x 1-1/4 x 3/4
1-3/8 c 1-3/8 x 1-1/8
1-1/4 x 1-1/4 x 1
1-5/8 x 1-5/8 x 1-5/8
1-1/2 x 1-1/2 x 1-1/2
2-1/8 x 2-1/8 x 2-1/8
2x2x2
5
5
5
5
5
5
1/4 x 1/4 x 1/4
3/8 x 3/8 x 3/8
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
799
Female Adapters
Copper to Female
PIPE SIZE
1/8
TUBE SIZE
ACTUAL (Industrial)
TUBE SIZE
NOMINAL (Plumbing)
1/4
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/4
1/2
3/8
1/2
1/2
3/8
1/2
5/8
1/2
1/4
5/8
1/2
3/8
5/8
1/2
3/4
5/8
1/2
1/2
3/4
5/8
3/4
3/4
5/8
3/4
7/8
3/4
1/2
7/8
3/4
1
7/8
3/4
1
1-1/8
1
3/4
1-1/8
1
1-1/4
1-1/8
1
1-1/4
1-3/8
1-1/4
1-1/2
1-3/8
1-1/4
1-1/2
1-5/8
1-1/2
2
2-1/8
2
UZ PART #
QTY.
26209
26210
26211
26212
26213
26215
26216
26217
26218
26219
26220
26221
26222
26223
26224
26225
26226
26227
26228
26229
26230
5
PART #
QTY.
26232
26233
26234
26235
26236
26237
26238
26239
26240
5
5
5
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
1
Female Fitting Adapters
Fitting to Female
PIPE SIZE
TUBE SIZE
NOMINAL (Plumbing)
1/4
3/8
1/4
3/8
1/2
3/8
1/2
5/8
1/2
3/8
5/8
1/2
3/4
800
TUBE SIZE
ACTUAL (Industrial)
7/8
3/4
1
1-1/8
1
1-1/4
1-3/8
1-1/4
1-1/2
1-5/8
1-1/2
2
2-1/8
2
5
5
5
5
2
2
2
1
Male Adapters
Copper to Male
TUBE SIZE
NOMINAL (Plumbing)
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/4
3/8
1/2
3/8
1/2
1/2
3/8
3/4
1/2
3/8
1/2
5/8
1/2
3/8
5/8
1/2
3/4
5/8
1/2
1
5/8
1/2
1/2
3/4
5/8
3/4
7/8
3/4
1/2
7/8
3/4
1
7/8
3/4
1
1-1/8
1
3/4
1-1/8
1
1-1/4
1-1/8
1
1-1/4
1-3/8
1-1/4
1
1-3/8
1-1/4
1-1/2
1-3/8
1-1/4
1-1/2
1-5/8
1-1/2
1-1/4
1-5/8
1-1/2
2
2-1/8
UZ PART #
QTY.
5
2
26185
26186
26187
26188
26189
26190
26191
26192
26193
26194
26195
26197
26198
26199
26200
26201
26202
26203
26204
26205
26206
26207
26208
TUBE SIZE
ACTUAL(Industrial)
TUBE SIZE
NOMINAL (Plumbing)
UZ PART #
QTY.
1/4
3/8
1/4
5
3/8
1/2
3/8
1/2
1/2
3/8
1/2
5/8
1/2
3/4
7/8
3/4
1-1/8
1
26242
26243
26244
26245
26248
26249
5
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
TUBE SIZE
ACTUAL(Industrial)
PIPE SIZE
2
2
2
1
Male Fitting Adapters
Fitting to Male
PIPE SIZE
1
5
5
5
2
2
801
Fitting Reducers
Fitting to Copper
TUBE SIZE
TUBE SIZE
ACTUAL (Industrial) NOMINAL (Plumbing) UZ PART #
26075UZ
3/8 x 1/4
1/4 x 1/8
1/2 x 1/4
3/8 x 1/8
1/2 x 3/8
3/8 x 1/4
5/8 x 3/8
1/2 x 1/4
5/8 x 1/2
1/2 x 3/8
3/4 x 3/8
5/8 x 1/4
3/4 x 1/2
5/8 x 3/8
3/4 x 5/8
5/8 x 1/2
7/8 x 3/8
3/4 x 1/4
7/8 x 1/2
3/4 x 3/8
7/8 x 5/8
3/4 x 1/2
7/8 x 3/4
3/4 x 5/8
1-1/8 x 1/2
1 x 3/8
1-1/8 x 5/8
1 x 1/2
1-1/8 x 3/4
1 x 5/8
QTY.
10
26076UZ
26077
26078UZ
26079
26080
26081
26082
26083
26084
26085
26086
26087
26088
26089
TUBE SIZE
TUBE SIZE
ACTUAL (Industrial) NOMINAL (Plumbing) UZ PART #
1-1/8 x 7/8
1 x 3/4
10
1-3/8 x 5/8
1-1/4 x 1/2
10
1-3/8 x 7/8
1-1/4 x 3/4
10
1-3/8 x 1-1/8
10
1-5/8 x 5/8
1-1/2 x 1/2
10
1-5/8 x 7/8
1-1/2 x 3/4
10
1-5/8 x 1-1/8
1-1/2 x 1
10
1-5/8 x 1-3/8
1-1/2 x 1-1/4
10
2-1/8 x 5/8
2 x 1/2
10
2-1/8 x 7/8
2 x 3/4
10
2-1/8 x 1-1/8
2x1
5
2-1/8 x 1-3/8
2 x 1-1/4
5
2-1/8 x 1-5/8
2 x 1-1/2
1-1/4 x 1
5
5
Female Tees
Copper to Copper to Female
TUBE SIZE
ACTUAL (Industrial)
TUBE SIZE
NOMINAL (Plumbing)
1/2
5/8 x 5/8
1/2 x 1/2
3/4
7/8 x 7/8
3/4 x 3/4
7/8 x 7/8
3/4 x 3/4
1-1/8 x 1-1/8
1x1
PIPE SIZE
1/2
1
UZ PART #
QTY.
26136
26137
26138
26139
5
Tube Caps
TUBE SIZE
ACTUAL (Industrial)
TUBE SIZE
NOMINAL (Plumbing)
1/4
1/8
3/8
1/4
1/2
3/8
5/8
1/2
3/4
5/8
7/8
3/4
1-1/8
1
1-3/8
1-1/4
1-5/8
1-1/2
2-1/8
2
802
UZ PART #
QTY.
26065
26066
26067
26068
26069
26070UZ
26071
26072
26073UZ
26074
10
10
5
10
10
5
5
5
5
2
5
5
5
26090
26091
26092
26093
26094
26095
26096
26097
26098
26099
26100
26101
26102
QTY.
5
5
2
2
2
2
2
2
1
1
1
1
1
SharkBite Fittings
SharkBite Push-Fit Fittings
SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC and PEX in any combination. No soldering or glue needed. Certified:
200 psi and 200° F (93° C). Use for new installation and repair of potable water distribution systems. Certified and listed to ASSE 1061/NSF 61.
Couplings
Size
1/4 X 1/4
3/8 X 3/8
1/2 X 1/2
3/4 X 3/4
1” X 1”
Qty
1
1
1
1
1
Straight Connectors
Size
UZ Part #
1/2 X 1/2 Female 400116
3/4 X 3/4 Female 400117
1” X 1” Female
400118
1/2 X 1/2 Male
400119
3/4 X 3/4 Male
400120
1” X 1” Male
400121
Qty
1
1
1
1
1
1
Reducing Connectors
Size
UZ Part #
1/4 X 1/2 Female 400090
3/8 x 1/2 Female 400093
1/2 X 3/4 Female 400122
1/4 X 1/2 Male
400094
3/8 X 1/2 Male
400097
1/2 X 3/4 Male
400123
1” X 3/4 Male
400124
Qty
1
1
1
1
1
1
1
90 Degree Elbow
Size
UZ Part #
1/4 X 1/4
400100
3/8 X 3/8
400101
1/2 X 1/2
400125
3/4 X 3/4
400126
1” X 1”
400127
Qty
1
1
1
1
1
Tees
Size
1/4X1/4X1/4
3/8X3/8X3/8
1/2X1/2X1/2
3/4X3/4X3/4
1”X1”X1”
UZ Part #
400105
400106
400128
400129
400130
Qty
1
1
1
1
1
Reducing Tee
Size
3/4X3/4X1/2
1”X1”X3/4”
UZ Part #
400131
400132
Qty
1
1
Cap
Size
3/8”
1/2”
3/4”
1”
UZ Part #
400108
400133
400134
400135
Qty
1
1
1
1
Disconnect Clips
Size
UZ Part #
1/4”
400111
3/8”
400112
1/2”
400136
3/4”
400137
1”
400138
Qty
2
2
2
2
2
Check Valves
Size
1/2”
3/4”
1”
UZ Part #
400139
400140
400141
Qty
1
1
1
Slip Tees
Size
1/2”
3/4”
UZ Part #
400142
400143
Qty
1
1
Ball Valves
Size
1/2”
3/4”
1”
UZ Part #
400144
400145
400146
Qty
1
1
1
UZ Part #
400086
400088
400113
400114
400115
803
Non-Threaded Caps and Plugs
Tapered Polyethylene Caps and Plugs
• Tapered body provides firm friction fit when
used as either a cap or plug
• Secure fit and easy removal
• Provides excellent protection against
damage, dirt or moisture that occurs
during storage or shipping.
• Recommended for tubing, threaded fittings
and fasteners electrical connectors and
machined parts
When used as a Plug: plugging dimension
should be at least .020" larger than diameter
to be plugged.
When used as a Cap: Capping dimension
Should be at least .020" less than diameter
to be capped.
-40 oF to +175 oF
MIL-C-5501/7, MIL-C-52078, NAS 834
Tapered Caps & Plugs For Tube and Hydraulic Fittings
UZ #
Industry UZ # Industry Tubing Size
As Plugs Number As Caps Number
O.D.
120661
1
120662
2
1/8
122062
2
120665
3X
3/16
120664
3
120667
4X
1/4
120666
4
120668
5
5/16
120668
5
120670
6X
3/8
120669
6
120671
7
3/8
120672
8
120675
9X
1/2
Thread
Size Quantity
5/16-24
50
3/8-24
50
7/16-20
50
1/2-20
50
9/16-18
50
5/8-18
50
3/4-16
50
UZ #
Industry UZ # Industry Tubing Size Thread
As Plugs Number As Caps Number
O.D.
Size Quantity
120674
9
120677
11
1/2
----50
120676
10
120678
11X
5/8
7/8-14
50
120683
14X 120684
15X
1
1-5/16-12 50
120686
17S 120687
18
1-1/4 1-5/8-12
20
*120689
19 *120690
20
1-1/2 1-7/8-12
20
*120694 221 *120696
230
1-3/4 2-1/4-12
20
*120697 240 * 120698 250
2
2-1/2-12
20
Tapered Caps & Plugs for Unthreaded Standard Weight Pipe
UZ#
Industry
As Plugs Number QTY
120661
1
50
120663
2X
50
120668
5
50
120671
7
50
120676
10
50
UZ#
As Caps
120666
120670
120673
120677
120681
Industry
Number
4
6X
8X
11
13X
Size
QTY
50
50
50
50
50
(In.)
1/8
1/4
3/8
1/2
5/8
UZ#
Industry
As Plugs Number QTY
120680
13
50
120685
16
50
120687
18
20
*120693 220
20
*120698 250
20
UZ#
As Caps
120685
* 120688
* 120692
*120697
* 120699
Tapered Caps and Plugs for Threaded External & Internal N.P.T. Fittings
UZ #
As Plugs
120663
120666
120670
120674
120679
120682
120686
*120691
*120695
-----
Industry
Number
2X
4
6X
9
12X
14
17S
20S
24S
---
QTY
50
50
50
50
50
50
20
20
20
---
UZ #
As Caps
120666
120669
120673
120677
120681
120684
120687
*120690
*120697
*120699
Industry
Number
4
6
8X
11
13X
15X
18
20
240
45A
QTY
50
50
50
50
50
50
20
20
20
20
Size
(In.)
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
Available in
an Assortment
*Denotes Non-Stock Items
PART #00988
Found on Page 675
804
Industry
Number
16
18X
210
240
45A
Size
QTY (In.)
50
1
20 1-1/4
20 1-1/2
20
2
20 2-1/2
Hose Protection
Rhino Wrap
Abrasion Protection Wrap
Rhino Wrap is a very high density neoprene wrap with a special adhesive backing that will always stay soft.
Features and Benefits
• The high density neoprene is extremely abrasive resistant and will out last the typical hose jacket 10 to 1.
• Used with Amalgamating Wrap, UZ #10870 it will stay in place, while protective "socks" and "sleeves" held in place with cable ties,
move/slide out of place.
• You can install the product in the field or in the garage, and you don't have to disconnect the hose.
• Use on new or existing hose to extend life and prevent wear in the field.
Part #
119189
119190
119191
119192
Description
RHINO WRAP 1" X 6' W/AMALGAMATING TAPE
RHINO WRAP 1" X 10' ROLL
QTY
PK1
PK1
PK1
PK1
RHINO WRAP - CABLE & HOSE COVERAGE CHART
Size / Kits Size
6' Kit
10' Roll
1/0 Cable
30"
50"
2/0 Cable
28"
46-1/2"
3/0 Cable
26"
43-1/2"
4/0 Cable
24"
40"
Available in
an Assortment
APPLICATIONS
Municipalities….Garbage Trucks, Snow Plows, Street Sweepers, Back Hoes, Rock Hammers.
Construction Companies
Rental Companies
Railroads
Amusement Parks
Marinas
Mining
Any place where a hose or cable has an abrasion problem
Truck Fleets
Machine Shops
3/8" Hydraulic Hose
26"
43"
1/2" Hydraulic Hose
20"
33-1/2"
3/4" Hydraulic Hose
15"
24-1/2"
1" Hydraulic Hose
12"
20"
ALL DIMENSIONS ARE APPROXIMATE LENGTHS
PART #00434
Found on Page 675
PART #00435
Found on Page 675
PART #00436
Found on Page 675
PART #00437
Found on Page 676
Hose Protectors
Hose Protectors are durable wear shields made of an abrasion resistant material. Easily attached to almost
any size or type of hose, it prevents up to 90% of all failure due to wear at points of contact. With an extremely high wear factor and a wide range of operating temperatures (-40° to 430° F) the Hose Protector provides
protection in a variety of applications.
Abrasion Protection For:
Features:
Market Applications:
• Hydraulic Hoses
• Wiring Harness
• Brake Systems
• Fuel Lines
• Air Lines
• Radiator Hoses
• Oil Lines
• Battery Cables
PART #
DESCRIPTION
HP4-Y
HP6-Y
HP8-Y
• Extremely high wear factor
• Formulated to resist solvents, oils,
grease, gasoline, etc.
• 3 grooves protect cable ties
and prevent slipping
• Operating temperature
range is -40° to 430°F
• Exceptionally cost effective
• Easy installation in minutesno need to remove hose
• Available in 3 sizes 4", 6" and 8" - cable ties included
•
•
•
•
•
•
•
•
•
•
QUANTITY
10
10
10
Agricultural
Industrial
Trucking
Mining
Construction
Aviation Support
Public Transportation
Road Maintenance
Waste Management
Original Equipment Manufacturer
Available in
an Assortment
PART #00325
Found on Page 676
805
Tubing
Copper Tubing - Standard Duty
•
•
•
•
Soft Annealed.
Seamless.
100% Virgin Copper.
Used for liquid line and suction line in refrigeration
and air conditioning applications.
• May also be used for water lines.
Wall Gauge
Size O.D. (in.)
(in.)
UZ Part #
123458
123459
123460
123461
123462
123463
123464
123465
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
.030
.030
.030
.032
.032
.032
.035
.035
Bursting
Pressure
Lbs./Sq. Inch
Safe-Working
Pressure
Lbs./Sq. Inch
Length (Ft.)
Qty.
12000
8000
5000
4000
3000
2000
1800
1500
3130
1990
1450
1230
1010
740
640
520
50
50
50
50
50
50
50
50
1
1
1
1
1
1
1
1
Thermoplastic Tubing - Nylon
• Flexible nylon tubing is carefully made from high-grade, abrasion resistant,
heat and light stabilized nylon.
• Resistance to stress cracking greatly exceeds that of ordinary nylon tubing.
• Exhibits extremely low level water absorption.
• Chemical resistant nylon tubing has the additional benefits of better flexibility, lighter weight and resistance to flexural fatigue.
• Operating temperatures, depending upon conditions, are -65°F to +200°F (-54°C to +93°C) continuous.
• Color is natural.
UZ PART
NO.
NOMINAL
TUBE O.D.
(in.)
10633
10632
10634
10635
10636
10637
10638
NOMINAL
TUBEI.D.
(in.)
AVG. WALL
THICKNESS
(in.)
WORKING
PRESSURE AT
73°F PSI
MIN. BURST
PRESSURE
PSI @ 73°F
LENGTH
(ft.)
QTY.
1/8
.093
.016
250
1000
1/4
50
1
5/32
.106
.025
250
1000
1/2
50
1
3/16
.138
.025
250
1000
5/8
50
1
1/4
.180
.035
250
1000
7/8
50
1
5/16
.233
.040
250
1000
1-1/8
50
1
3/8
.275
.050
250
1000
1-1/8
50
1
1/2
.375
.062
250
1000
1-1/4
50
1
Use with:
Standard Compression fittings with brass tube insert for support
Insta-Lok fittings
Poly-Tite fittings with tube insert installed
806
MIN.
BEND
RADIUS (in.)
Tubing
Thermoplastic Tubing - Polypropylene
• Laboratory Grade - FDA, NSF - 51 Listed.
• Acid, Chemical and Corrosion Resistant.
• Flexible.
• May be used at higher temperatures and working pressure than polyethylene tubing.
• Resistance to hot water, hot corrosive acids is excellent.
• Lasts longer than nylon tubing in hot water service.
• Water absorption of less than .01%.
• Excellent resistance to cracking.
• Operating temperatures, depending upon conditions, are 0°F to +200°F (-18°C to +93°C).
• Color is white.
UZ PART
NO.
NOMINAL
TUBE O.D.
(in.)
10639
10640
10641
10642
10643
10644
10645
NOMINAL
TUBE I.D.
(in.)
AVG. WALL
THICKNESS
(in.)
WORKING
PRESSURE AT
73°F PSI
MIN. BURST
PRESSURE
PSI @ 73°F
MIN.
BEND
RADIUS (in.)
LENGTH
(ft.)
QTY.
1/8
.080
.023
350
1400
1/2
100
1
3/16
.120
.034
350
1400
3/4
100
1
1/4
.170
.040
300
1200
1
100
1
5/16
.187
.062
350
1400
1-1/4
50
1
3/8
.250
.062
300
1200
1-1/4
50
1
1/2
.375
.062
225
900
2-1/2
50
1
5/8
.500
.062
175
700
4
50
1
Use With:
Standard Compression fittings with brass tube insert for support
Insta-Lok fittings
807
Tubing
Thermoplastic Tubing - Polyethylene
• Chemical Resistant.
• Flexible polyethylene tubing is extruded from high molecular weight resin for increased dimensional stability,
uniformity, and long-term strength.
• Resistance to environmental stress cracking greatly exceeds that of ordinary polyethylene tubing as measured by
ASTM D-1693 (10% IGEPAL).
• Black tubing contains an ultraviolet inhibitor that is recommended for use in sunlit areas and in close
proximity to high UV light sources.
• All colors of tubing meet FDA and NSF 51 requirements for food contact applications.
• Conforms to ASTM D-1248, Type 1, Class A, Category 4, Grade E5.
• Operating temperatures, depending upon conditions, are -80°F to +150°F (-62°C to +66°C).
UZ PART
N0.
102623
10646
10647
10648
10649
102624
102625
102626
102627
102628
10650
10651
10652
10653
102629
102630
102631
102632
102633
102634
102635
808
COLOR
O.D.
(in.)
I.D.
(in.)
AVG. WALL
THICKNESS
(in.)
WORKING
PRESSURE
PSI @ 73°F
MIN. BURST
PRESSURE
PSI @ 73°F
MIN.
BEND
Radius (in.)
LENGTH
(ft.)
QTY.
1/4
.170
.040
120
480
1
50
1
5/16
.187
.062
145
580
1-1/8
50
1
3/8
.250
.062
125
500
1-1/4
50
1
1/2
.375
.062
90
360
2-1/2
50
1
5/8
.500
.062
70
280
4
50
1
Natural
Black
Red
Blue
Green
Yellow
White
Natural
Black
Natural
Black
Red
Blue
Green
Yellow
White
Natural
Black
White
Natural
Black
Tubing
Thermoplastic Tubing - Clear Vinyl
• Instrument and Laboratory Grade - FDA Compliance.
• Made from virgin clear PVC (polyvinyl chloride) resin, specially formulated for exceptional purity, clarity and flexibility.
• Meets all specifications called out by the United State Food and Drug Administration (FDA) for materials in contact with
food and drugs for human consumption.
• 70 durometer for soft, easy handling and bending without tubing collapse.
• Crystal clear for fully visible fluid flow and excellent appearance.
UZ PART NO.
10654
10655
10657
10659
10660
O.D. (in.)
I.D. (in.)
AVG. WALL
THICKNESS (in.)
WORKING PRESSURE
PSI @ 73°F
1/8
1/16
1/32
35
100
1
1/4
1/8
1/16
65
50
1
3/8
1/4
1/16
55
50
1
1/2
3/8
1/16
45
50
1
3/4
1/2
1/8
45
25
1
• Operating temperatures, depending upon conditions, are -40°F to +150°F (-40°C to +65°C).
LENGTH (ft.) QTY.
For best possible fitting holding power, a tube support is strongly recommended as an accompaniment for
this tubing. Hose clamps are essential when using this tubing with barbed fittings.
809
Tubing
Nylon Air Brake Tubing
•
•
•
•
•
•
Nylon tubing designed for use in tractor, trailer and other mobile air brake, fuel instrumentation and air accessory systems.
Meets SAE specification J844 Type A or B D.O.T. FMVSS 106 and performance requirements as specified in SAE specification J1131.
100% quality controlled - 100% pressure tested.
Saves weight and labor in comparison with copper tubing.
Heat and light stabilized.
Color is black.
PFT Type A
•
•
•
•
•
Heat and light stabilized seamless single wall extruded nylon tubing.
This tubing conforms to SAE specification J833 type A. The A refers to non-reinforced tubing.
Temperature Range: -40°F to +200°F (-40°C to +93°C).
Maximum Working Pressure: 150 PSI.
Meets D.O.T. FMVSS 106.
UZ PART NO.
TUBE O.D. (in.)
MIN. BEND RADIUS (in.)
LENGTH (ft.)
QTY.
39502
1/8
3/8
50
1
99-10864
39504
39505
5/32
1/2
50
1
1/4
1
50
1
5/16
1-1/4
50
1
PFT Type B
• Heat and light stabilized seamless extruded nylon core reinforced with one open ply of fibrous reinforcement and a
protective nylon cover sheath. The outer cover and core are fused to minimize leakage and maximize impact resistance
and are always of contrasting colors.
• This tubing conforms to SAE specification J844 type B. The B refers to reinforced tubing.
• Temperature Range: -40°F to +200°F (-40°C to +93°C).
• Maximum Working Pressure: 150 PSI.
• Meets D.O.T. FMVSS 106.
UZ PART NO.
39506
39508
39510
39512
810
TUBE O.D. (in.)
MIN. BEND RADIUS (in.)
LENGTH (ft.)
QTY.
3/8
1-1/2
50
1
1/2
2
50
1
5/8
2-1/2
50
1
3/4
3
50
1
Hydraulic Hose
811
Hydraulic Hose
812
Hydraulic Hose
Available in
an Assortment
813
PART #124150
Found on Page 676
Hydraulic Hose
814
Hydraulic Hose
H239 Truck Hose
SAE J1402 TYPE AII,
DOT All
H569 Hydraulic Hose
SAE 100R5, SAE J1402 TYPE AII, DOT AII*, ABS
PART#
H56904
H56904-250R
H56905
H56905-250R
H56906
H56906-250R
H56908
H56908-250R
H56910
H56910-250R
H56912
H56912-250R
H56916
H56916-250R
H56920
H56920-250R
HOSE ID
HOSE OD
WORKING
PRESS. (PSI)
MIN. BEND
RADIUS
WT. PER
100 FT.
mm
4,8
in fraction
0.19 3/16
mm
13,1
in
0.52
fraction
33/64
bar
206,9
psi
3,000
bar
psi
827,4 12,000
mm
76,2
in
3.00
Kg/m lbs/ft
7,3 16
6,4
0.25
1/4
14,7
0.58
37/64
206,9
3,000
827,4 12,000
86,1
3.39
9,1
20
7,9
0.31
5/16
17,1
0.67
43/64
155,1
2,250
620,6
9,000
101,6
4.00
10,4
23
10,3
0.41 13/32
19,4
0.77
49/64
137,9
2,000
551,6
8,000
117,5 4.625
12,2
27
12,7
0.50
1/2
23,4
0.92
59/64
120,7
1,750
482,7
7,000
139,7
5.50
16,3
36
15,9
0.63
5/8
28,4
1.08
1-5/64
103,4
1,500
413,7
6,000
165,1
6.50
20,0
44
22,2
0.88
7/8
31,4
1.23
1-15/64
55,2
800
220,6
3,200
187,7
7.39
20,9
46
28,6
1.13 1-1/8
38,1
1.50
1-1/2
43,1
625
172,4
2,500
228,6
9.00
23,1
51
Typical Application:
Temp. Range:
General purpose truck,marine and hydraulic hose.
Hydraulic Fluid: -55°F to
For
use in air brake*, diesel fuel, grease lines, high
Reinforcement: 2 Fiber 302°F (-48°C to 150°C)
temperature petroleum oils and medium pressure
Braids and 1 Steel Braid Air Brake: -40°F to 200°F
hydraulic applications.
(-40°C to 93°C)*
Cover: Fiber Braid - Blue Air: -40°F to 212°F (-40°C to
100°C) Intermittent to 250°F
Inner Tube: CPE
MIN. BURST
PRESSURE
* Air brake applications, sizes -04 through -12 only.
Marine Application Hydraulic only
ABS approved for sizes
5/16 through 1-1/8 inches.
AVAIL.
LENGTHS
feet
50
250
50
250
50
250
50
250
50
250
50
250
50
250
50
250
Hose End Reference
C-O-C
069 'E' Series
Field Attachable
247 'N' Series (sizes -6 to -12)
815
Hydraulic Hose
H069 General Purpose Truck Hose
SAE 100ftb.
SAE J1402 TYPE ll†,
DOT All†, ABS1
816
Hydraulic Fittings
Available in
an Assortment
Found on Page 677
817
Hydraulic Fittings
818
Hydraulic Fittings
819
Hydraulic Fittings
820
Hydraulic Fittings
821
Hydraulic Fittings
822
Hydraulic Fittings
823
Hydraulic Fittings
824
Hydraulic Fittings
825
Hydraulic Fittings
826
Hydraulic Fittings
827
Hydraulic Fittings
828
Hydraulic Fittings
829
Hydraulic Fittings
830
Hydraulic Fittings
831
Hydraulic Fittings
832
Hydraulic Fittings
833
Hydraulic Fittings
834
Hydraulic Fittings
835
Hydraulic Fittings
836
Hydraulic Fittings
Comparable to Push-Lok Fittings.
837
Hydraulic Fittings
838
Hydraulic Fittings
839
Hydraulic Fittings
840
Hydraulic Fittings
841
Hydraulic Fittings
842
Hydraulic Fittings
843
Hydraulic Fittings
844
Hydraulic Crimpers
845
Hydraulic Crimpers
846
Hydraulic Assortment
847
Steel Hose Adapters
848
Steel Hose Adapters
849
Steel Hose Adapters
850
Steel Hose Adapters
851
Steel Hose Adapters
852
Steel Hose Adapters
853
Steel Hose Adapters
854
Steel Hose Adapters
855
Steel Hose Adapters
856
Steel Hose Adapters
857
Steel Hose Adapters
858
Steel Hose Adapters
859
Steel Hose Adapters
860
Steel Hose Adapters
861
Steel Hose Adapters
862
Steel Hose Adapters
863
Steel Hose Adapters
864
Steel Hose Adapters
865
Steel Hose Adapters
866
Steel Hose Adapters
867
Steel Hose Adapters
868
Steel Hose Adapters
869
O-Rings
Industrial O-Rings
BUNA-N (Nitrile) O-RINGS
• Buna-N (Nitrile) is the most widely used rubber material for O-rings due to its
resistance to a wide variety of fluids
• Manufactured from 70 Durometer stock nitrile rubber
• Temperature range : -40°F to +250°F
• Excellent resistance to mineral oils, hydraulic fluids, water, air, LP and natural gas.
• Nitrile compounds have excellent abrasion resistance.
Viton O-Rings
• Viton O-rings far outlast o-rings made from nitrile (Buna-N) and other general purpose elastomers.
Providing your customer with extended service intervals and stretching maintenance budgets.
• Manufactured from 75 Durometer stock fluorocarbon rubber.
• Temperature range : -15° to 400° F
• Tensile strength is 1,705 PSI (minimum)
• Excellent resistance to aggressive fuels and chemicals, i.e. oils, fuels, lubricants and most mineral acids.
• Not for use with Acetone, Skydrol or Ethyl Acetate.
• Low compression set and low gas permeability.
• Excellent resistance to atmospheric oxidation, sunlight and ozone.
• Good electrical properties in low voltage, low frequency applications.
• Markets: Automotive, Chemical Processing and Transportation, Off-Highway and Heavy Duty Equipment and
Petroleum Refining and Transportation.
• Color is Brown.
How to Measure O-Rings:
Thickness
1/16"
3/32"
1/8"
3/16"
870
O.D.
I.D.
O-Rings
THICKNESS INDUSTRY
I.D.
O.D.
BUNA-N
#
(INCHES) (INCHES) PART #
1/32
1/16
1/32
3/64
1/16
5/64
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/4
3/32
9/64
3/16
13/64
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1/1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/8
3-3/8
3-5/8
3-7/8
4-1/8
4-3/8
4-5/8
4-7/8
5-1/8
5-3/8
30006
30007
30008
30009
30010
30011UZ
30012
30013
30014
30015
30016
30017
30018
30019
30020
30021UZ
30022
30023
30024
30025
30026
30027
30028
30029
30030
30031
30032
30033
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
30034
30035
10
10
30036
10
123882*
123883*
123884*
123885*
123886*
123887
123888
123889
123890
123891
123892
123893
123894
123895
123896
123897
123898
123899
123900
123901
123902*
123903*
123904*
123905*
123906*
123907*
123908*
123909*
123910*
123911*
123912*
123913*
123914*
123915*
123916*
123917*
123918*
123919*
123920*
123921*
123922*
123923*
123924*
123925*
123926*
123927*
123928*
123929*
123930*
123931*
VITON
PKG QTY
25
25
25
25
25
25
25
25
25
25
25
25
20
20
20
20
20
20
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
2
2
2
2
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
BUNA-N VITON
PKG QTY PART #
* Nonstock
871
O-Rings
THICKNESS INDUSTRY
#
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
3/32
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
I.D.
O.D.
BUNA-N
1/16
1/4
3/32
9/32
1/8
5/16
30037
5/32
11/32
30038
3/16
3/8
30039
7/32
13/32
30040
1/4
7/16
30041
5/16
1/2
30042
3/8
9/16
30060
7/16
5/8
30061
1/2
11/16
30062
9/16
3/4
30063
5/8
13/16
30064
11/16
7/8
30065
3/4
15/16
30066
13/16
1
30067
7/8
1-1/16
30068
15/16
1-1/8
30069
1
1-3/16 220460
1-1/16
1-1/4
30070
1-1/8
1-5/16
30071
1-3/16
1-3/8
30072
1-1/4
1-7/16
1-5/16
1-1/2
1-3/8
1-9/16
1-7/16
1-5/8
30073
1-1/2
1-11/16 30074
1-9/16
1-3/4
30075
1-5/8
1-13/16 30076
1-11/16
1-7/8
30077
1-3/4
1-15/16 30078
1-13/16
2
1-7/8
2-1/16
30079
1-15/16
2-1/8
30080
2
2-3/16
2-1/16
2-1/4
2-1/8
2-5/16
2-3/16
2-3/8
2-1/4
2-7/16
2-5/16
2-1/2
2-3/8
2-9/16
2-7/16
2-5/8
2-1/2
2-11/16
2-9/16
2-3/4
30081
2-5/8
2-13/16
2-11/16
2-7/8
2-3/4
2-15/16
2-13/16
3
2-7/8
3-1/16
3
3-3/16
BUNA-N VITON
PKG QTY PART #
123932*
123933*
20
123934*
20
123935*
20
123936*
20
123937*
20
123938*
20
123939*
20
123940
20
123941
20
123942
20
123943
20
123944
20
123945
20
123946
20
123947
20
123948
20
123949
50
123950
20
123951
20
123952
20
123953
123954
123955
123956
10
123957
10
123958
10
123959
10
123960
10
123961
10
123962
123963*
10
123964*
10
123965*
123966*
123967*
123968*
123969*
123970*
123971*
123972*
123973*
123974*
10
123975*
123976*
123977*
123978*
123979*
123980*
123981*
VITON
PKG QTY
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
3
3
3
3
3
3
2
* Nonstock
872
O-Rings
THICKNESS INDUSTRY
I.D.
O.D.
BUNA-N
#
3/32
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/4
5-1/2
5-3/4
6
6-1/4
6-1/2
6-3/4
7
3-7/16
3-11/16
3-15/16
4-3/16
4-7/16
4-11/16
4-15/16
5-3/16
5-7/16
5-11/16
5-15/16
6-3/16
6-7/16
6-11/16
6-15/16
7-3/16
168
169
170
171
172
173
174
175
176
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
8-3/4
9
9-1/4
7-7/16
7-11/16
7-15/16
8-3/16
8-7/16
8-11/16
8-15/16
9-3/16
9-7/16
177
178
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
9-1/2
9-3/4
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
9-11/16
9-15/16
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-7/8
30082
30083
30084
30085
30086
30087
30088
30089
30090
30091
30130
30131
30132
30133
30134
30135
30136
30137
30138
30139
30140
30141
30142
30143
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
VITON
PKG QTY
123982*
123983*
123984*
123985*
123986*
123987*
123988*
123989*
123990*
123991*
123992*
123993*
123994*
123995*
123996*
123997*
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
123998*
123999*
124000*
124001*
124002*
124003*
124004*
124005*
124006*
2
2
2
2
2
2
2
2
2
124007*
124008*
124009*
124010*
124011*
124012*
124013*
124014*
124015*
124016*
124017*
124018
124019
124020
124021
124022
124023
124024
124025
124026
124027
124028
124029
124030
124031
2
2
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
1/8
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
BUNA-N VITON
PKG QTY PART #
* Nonstock
873
O-Rings
THICKNESS INDUSTRY
I.D.
O.D.
BUNA-N
#
224
1-3/4
2
30144
225
1-7/8
2-1/8
220464
226
2
2-1/4
30145
227
2-1/8
2-3/8
30146
228
2-1/4
2-1/2
30147
229
2-3/8
2-5/8
30148
230
2-1/2
2-3/4
30149
231
2-5/8
2-7/8
30150
232
2-3/4
3
30151
233
2-7/8
3-1/8
234
3
3-1/4
235
3-1/8
3-3/8
30152
236
3-1/4
3-1/2
30153
237
3-3/8
3-5/8
238
3-1/2
3-3/4
239
3-5/8
3-7/8
240
3-3/4
4
241
3-7/8
4-1/8
30154
242
4
4-1/4
243
4-1/8
4-3/8
244
4-1/4
4-1/2
30155
245
4-3/8
4-5/8
246
4-1/2
4-3/4
1/8
247
4-5/8
4-7/8
30156
248
4-3/4
5
30157
249
4-7/8
5-1/8
250
5
5-1/4
30158
251
5-1/8
5-3/8
252
5-1/4
5-1/2
253
5-3/8
5-5/8
254
5-1/2
5-3/4
255
5-5/8
5-7/8
30159
256
5-3/4
6
257
5-7/8
6-1/8
258
6
6-1/4
259
6-1/4
6-1/2
260
6-1/2
6-3/4
261
6-3/4
7
262
7
7-1/4
263
7-1/4
7-1/2
264
7-1/2
7-3/4
265
7-3/4
8
266
8
8-1/4
267
8-1/4
8-1/2
268
8-1/2
8-3/4
30160
269
8-3/4
9
30161
270
9
9-1/4
271
9-1/4
9-1/2
272
9-1/2
9-3/4
273
9-3/4
10
BUNA-N
PKG QTY
10
5
5
5
5
5
5
5
5
2
2
2
2
1
1
1
1
10
1
VITON
PART #
124032
124033
124034
124035*
124036*
124037*
124038*
124039*
124040*
124041*
124042*
124043*
124044*
124045*
124046*
124047*
124048*
124049*
124050*
124051*
124052*
124053*
124054*
124055*
124056*
124057*
124058*
124059*
124060*
124061*
124062*
124063*
124064*
124065*
124066*
124067*
124068*
124069*
124070*
124071*
124072*
124073*
124074*
124075*
124076*
124077*
124078*
124079*
124080*
124081*
VITON
PKG QTY
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
* Nonstock
874
O-Rings
I.D.
O.D.
BUNA-N
11
11-1/4
30162
11-1/2
11-3/4
30163
13
13-1/4
30164
14
14-1/4
30165
7/16
13/16
1/2
7/8
9/16
15/16
5/8
1
11/16
1-1/16
3/4
1-1/8
13/16
1-3/16
7/8
1-1/4
15/16
1-5/16
30166
1
1-3/8
1-1/16
1-7/16
1-1/8
1-1/2
30167
1-3/16
1-9/16
1-1/4
1-5/8
30168
1-5/16
1-11/16
1-3/8
1-3/4
1-1/2
1-7/8
30225
1-5/8
2
30226
1-3/4
2-1/8
30227
1-7/8
2-1/4
30228
2
2-3/8
30229
2-1/8
2-1/2
220469
2-1/4
2-5/8
30231
2-3/8
2-3/4
30232
2-1/2
2-7/8
30233
2-5/8
3
220473
2-3/4
3-1/8
220474
2-7/8
3-1/4
3
3-3/8
30234
3-1/8
3-1/2
30238
3-1/4
3-5/8
220477
3-3/8
3-3/4
220478
3-1/2
3-7/8
220479
3-5/8
4
30239
3-3/4
4-1/8
3-7/8
4-1/4
4
4-3/8
30240
4-1/8
4-1/2
30241
4-1/4
4-5/8
4-3/8
4-3/4
4-1/2
4-7/8
4-5/8
5
4-3/4
5-1/8
4-7/8
5-1/4
5
5-3/8
5-1/8
5-1/2
BUNA-N VITON
PKG QTY PART #
1
10
10
10
124082*
124083*
124084*
124085*
124086*
124087*
124088*
124089*
10
124090*
124091*
124092*
10
124093*
124094*
10
124095*
124096*
124097*
10
124098*
10
124099
10
124100
10
124101
10
124102*
5
124103*
10
124104
10
124105*
10
124106
10
124107*
10
124108*
124109*
5
124110*
10
124111
10
124112*
10
124113*
10
124114*
10
124115*
124116*
124117*
1
124118*
1
124119*
124120*
124121*
124122*
124123*
124124*
124125*
124126*
124127*
VITON
PKG QTY
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Available in
an Assortment
THICKNESS INDUSTRY
#
276
277
1/8
279
280
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
3/16
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
PART #00528
Found on Page 678
PART #00529
Found on Page 678
PART #00528V
Found on Page 678
PART #00529V
Found on Page 679
PART #00342
Found on Page 679
PART #00343
Found on Page 679
PART #00344
Found on Page 679
* Nonstock
875
O-Rings
THICKNESS INDUSTRY
I.D.
O.D.
BUNA-N
#
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
3/16
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9-3/4
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
6-5/8
6-7/8
7-1/8
7-3/8
7-5/8
7-7/8
8-1/8
8-3/8
8-5/8
8-7/8
9-1/8
9-3/8
9-5/8
9-7/8
10-1/8
BUNA-N VITON
PKG QTY PART #
30242
30243
1
1
30244
1
VITON
PKG QTY
124128*
124129*
124130*
124131*
124132*
124133*
124134*
124135*
124136*
124137*
124138*
124139*
124140*
124141*
124142*
124143*
124144*
124145*
124146*
124147*
124148*
124149*
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
* Nonstock
O-Ring Cord Stock
Nitrile Buna-N
MATERIAL- Nitrile (Buna-N)
TOLERANCE- To molded ring tolerances.
(Beyond commercial and precision tolerances)
STANDARDS- SAE.120 R c11. MIL-R-3065,
ASTM-SB 720, Shore Hardness 70 Durometer.
DIA.
.103
.139
.210
NOM. DIA.
3/32
1/8
3/16
220552
220553
220554
QTY.
1Ft.
1Ft.
1Ft.
.275
1/4
220555
1Ft.
.313
5/16
220556
1Ft.
.375
3/8
220557
1Ft.
Instant O-Rings...Using UZ’s O-Ring Cord Stock
Time-saving kit
PART # 220549
QTY. 1
• No waiting for specials.
• Makes all standard O-Rings and many specials.
• Eliminates down time.
• Includes special rapid-set adhesive.
• Ingenious splicing never fails.
CONTENTS:
1/4" 3/16" 1/8" 3/32" 1pc.
1pc.
1pc.
1pc.
876
1 razor blade
1 cutting and splicing jig
1 tube rapid-set adhesive
4 pieces O-Ring Nitrile Buna-N cord stock:
.103"
3/32"
4' long
.139"
1/8"
4' long
.210"
3/16"
7' long
.275"
1/4"
7' long
PART #
O-Rings
O-Rings Actual Size Chart
(Sizes that show more than one part number indicate that different
thicknesses are available. Refer to chart for the proper thickness.)
877
Fittings Selector Guide
For more Fittings Selector Guides go to the Technical Data Section 1189-1197.
877.A

Brass SAE 45° Flared Fittings

Transcription

Similar documents

Drill Heads

Cam and Groove Couplings - Goodyear Rubber Products Inc

champion / anderson fittings midland parker eaton

Wainbee Pneumatic Quick Picks

40850 Quick Reference.Final[k]

BASE YEAR PERIOD

tubing and fittings - Lesman Instrument Company

Air Tanks, Axles, Brass Fittings, Gladhand, and Spring Brakes

Pneumatic - East Manufacturing