Digimatic Scale Units

Digimatic Scale Units
SERIES 572 — Simplified Key Function Type
FEATURES
• The ORIGIN key allows setting of an absolute zero point to be
used as reference in subsequent measurements. Once set, the
ABS Digimatic Scale Unit is ready to show its true position
whenever turned on rather than "0.00" as with standard
models.
• The ZERO/ABS key allows the display to be zero-set at any slider
position along the beam for incremental comparison
measurements. This key will also allow return to the absolute
coordinate with a display of the true position from the origin
point.
• All units come with two mounting brackets, each located at
either end of the scale.
• Add-on Data Hold Unit (959143) is optional.
Horizontal
572-202-10
DIGIMATIC SCALE UNITS
SPECIFICATIONS
Metric
Resolution
0.01mm
Vertical
572-303-10
Mitutoyo's ABSOLUTE Digimatic Scale Unit offers special
functions which allow it to always remember its measuring
position even after the gage has been switched off.
Range
100mm
150mm
200mm
300mm
Inch/Metric
Resolution
.0005"/
0.01mm
Metric
Resolution
0.01mm
Technical Data
LCD
Origin-set, zero-set, power on/off, inch/mm conversion (inch/
mm type only), SPC data output, data hold (optional)
Battery:
SR44 (938882) x 1pc.
Battery life:
Approx. 3.5 years under normal use
Maximum response speed: Unlimited
Alarm:
Low battery voltage, scale contamination, counting value
composition error
Operating temperature: 0°C to 40°C
Horizontal
Display:
Functions:
Inch/Metric
Resolution
.0005"/
0.01mm
338
Order No.
572-200-10
572-201-10
572-202-10
572-203-10
Accuracy
0.03mm
0.03mm
0.03mm
0.04mm
Mass
230g
250g
270g
370g
Order No.
572-210-10
572-211-10
572-212-10
572-213-10
Accuracy
.001"
.001"
.001"
.002"
Mass
.51 lbs.
.55 lbs.
.59 lbs.
.81 lbs.
Order No.
572-300-10
572-301-10
572-302-10
572-303-10
Accuracy
0.03mm
0.03mm
0.03mm
0.04mm
Mass
250g
280g
310g
370g
Accuracy
.001"
.001"
.001"
.002"
Mass
.55 lbs.
.62 lbs.
.68 lbs.
.81 lbs.
Horizontal
Range
4" (100mm)
6" (150mm)
8" (200mm)
12" (300mm)
Vertical
Range
100mm
150mm
200mm
300mm
Vertical
Range
4" (100mm)
6" (150mm)
8" (200mm)
12" (300mm)
Order No.
572-310-10
572-311-10
572-312-10
572-313-10
Dimensions
72.1
L2
185
235
287
24
14.6
L1
209
209
311
7
3.8
2.5
12.4
4-M3 x 0.5
1.6
14.5
444
420
13.5
6.6
6.6
16
36
6.6
3.5
2.3
7
12
1.6
24
Order No.
572-200-10
572-201-10
572-202-10
6
4.6
40
20
35.4
16.3
36
6
4.6
57.2
Unit: mm
L1
L2
9
10
2-M3 x 0.5
Vertical
Unit: mm
L1
L2
35
31
Horizontal
Order No.
572-300-10
572-301-10
572-302-10
572-303-10
L1
244
294
344
444
L2
220
270
320
420
6
4.6
40
70.8
24
15.1
7
3.8
2.5
1.6
12.4
4-M3 x 0.5
572-203-10
Left
Standard
Back
Right
Description
Data Hold Unit
SPC cable (1m, standard)
SPC cable (2m, standard)
SPC cable (1m, L-shape, back)
SPC cable (2m, L-shape, back)
SPC cable (1m, L-shape, right)
SPC cable (2m, L-shape, right)
SPC cable (1m, L-shape, left)
SPC cable (2m, L-shape, left)
SPC cable with data switch (1m)
SPC cable with data switch (2m)
DIGIMATIC SCALE UNITS
36
Order No.
959143
905338
905409
905689
905690
905691
905692
905693
905694
959149
959150
6.6
9
20
40.7
OPTIONAL ACCESSORIES
Digimatic Display Units
SERIES 572 — Remote Display Counters with Bright LED for Digimatic Scale Unit
SPECIFICATIONS
Metric
SD-D1 Single-function type
Digimatic Display Unit
Model No.
Order No. 100V AC
110V AC
120V AC
240V AC
Scale input port
Display
Functions
SD-D1
572-001
572-001A
572-001D
572-001E
1
6-digit green LED
• Zero-setting
• SPC data output
• Error alarm
Power supply
9V DC, 500mA
(via AC adapter)
200(W)x120(D)
x66(H)mm
1.1kg
SD-D2
572-021
572-021A
572-021D
572-021E
1
6-digit green LED
• Zero-setting
• SPC data output
• Error alarm
• Presetting
• GO/±NG judgment
• GO/±NG output
• Counting direction switching
9V DC, 500mA
(via AC adapter)
236(W)x120(D)
x66(H)mm
1.3kg
SD-D1E
572-011
572-011A
572-011D
572-011E
SD-D2E
572-031
572-031A
572-031D
572-031E
Dimensions
SD-D2 Multi-function type
Digimatic Display Unit
Mass
The Digimatic Display Unit offers a large LED display for a
Digimatic Scale Unit. The bright LED readout is ideal for low-light
situations or when the scale unit must be inserted into an area
where its own display cannot be viewed directly. Two types of
single-function and multi-function are available on the Digimatic
Display Unit.
Inch/Metric
Model No.
Order No. 100V AC
110V AC
120V AC
240V AC
339
Digimatic Display Units
SERIES 572 — Multiple Key Function type
572-474
572-471
Horizontal
Mitutoyo's ABSOLUTE Digimatic Scale Units can be installed on
almost any equipment, offering the user precise linear
measurement capability with the added benefits of LCD readout
and output for recording data and SPC.
DIGIMATIC SCALE UNITS
FEATURES
• No rack, no pinion, no glass scale. Digimatic Scale Unit is safely
embedded in the hardened stainless steel blade.
• Horizontal or vertical face according to the scale mounting
direction.
• Once an absolute zero (origin) point is set, the Digimatic Scale
Unit shows its absolute distance from the point whenever
turned on rather than "0.00".
• Special type that is provided with diameter displaying function is
available for lathes.
• All units come with two mounting brackets, each located at
either end of the scale.
• With a data output for connection with an optional remote
display counter (Digimatic Display Unit).
Vertical
572-571
SPECIFICATIONS
Metric
Resolution Range
572-574
0.01mm
100mm
150mm
200mm
300mm
Technical Data
LCD
Origin-set, zero-set, ABS/INC coordinate switching, presetting,
power on/off, counting direction switching (standard type
only), inch/mm conversion (inch/mm type only), SPC data
output, data hold, diameter display (special type only)
Battery:
SR44 (938882) x 1pc.
Battery life:
Approx. 5000 hours under normal use
Maximum response speed: Unlimited
Alarm:
Low battery voltage, scale contamination error, counting
value composition error, over flow error
Operating temperature: 0°C to 40°C
450mm
Display:
Functions:
600mm
800mm
1000mm
Order No.
Horizontal
572-460
572-480*
572-461
572-481*
572-462
572-482*
572-463
572-483*
572-464
572-484*
572-465
572-485*
572-466
572-486*
572-467
572-487*
Order No.
Vertical
572-560
572-580*
572-561
572-581*
572-562
572-582*
572-563
572-583*
572-564
572-584*
572-565
572-585*
572-566
572-586*
572-567
572-587*
Accuracy
Mass
0.03mm
250g
0.03mm
280g
0.03mm
310g
0.04mm
370g
0.04mm
760g
0.05mm
900g
0.06mm
1710g
0.07mm
2040g
*Special type with diameter displaying function for lathe (Counting direction switching
function is not provided.)
340
Dimensions
Inch/Metric
Unit: mm
L1
L2
Mass
0.62 lbs.
.001"
0.68 lbs.
.002"
0.81 lbs.
.002"
1.67 lbs.
.002"
1.98 lbs.
.0025"
3.76 lbs.
.0025"
4.49 lbs.
6.6
.001"
71.1
4-M3 x 0.5
(4-No.5-40 UNC)
24
17.3
0.55 lbs.
9
.001"
6
4.6
40
20
41.3
13.5
36
Accuracy
7
3.8
2.5
Order No.
Vertical
572-570
572-590*
572-571
572-591*
572-572
572-592*
572-573
572-593*
572-574
572-594*
572-575
572-595*
572-576
572-596*
572-577
572-597*
12.4
.0005"/
0.01mm
Order No.
Horizontal
4" (100mm)
572-470
572-490*
6" (150mm)
572-471
572-491*
8" (200mm)
572-472
572-492*
12" (300mm) 572-473
572-493*
18" (450mm) 572-474
572-494*
24" (600mm) 572-475
572-495*
32" (800mm) 572-476
572-496*
40" (1000mm) 572-477
572-497*
1.6
Resolution Range
Range
100mm
150mm
200mm
300mm
L1
244
294
344
444
L2
220
270
320
420
Note: The dimensions are different between the
vertical model and the horizontal model. The
figure shown left represents the dimensions of
the horizontal Digimatic Scale Units.
*Special type with diameter displaying function for lathe (Counting direction switching
function is not provided.)
22
L1
L2
84
40
6
4.6
36
6.6
20
Description
SPC cables
Digimatic Display Units
4-M3 x 0.5
(4-No.5-40 UNC)
Range
450mm
600mm
800mm
1000mm
APPLICATIONS
L1
594
774
974
1174
L2
570
750
950
1150
t
6
6
10
10
Note: The dimensions are compatible for both
vertical and horizontal models in any of the
standard type and the special type.
Cutting machine
Focusing
Positioning of
machine table
Drilling machine
341
DIGIMATIC SCALE UNITS
1.6
t 12
24
4
Order No.
(See page 339.)
(See page 339.)
42
OPTIONAL ACCESSORIES
ABS Coolant Proof Digimatic Scale Units
SERIES 572 — With Dust/Water Protection Conforming to IP66 Level
SPECIFICATIONS
• Newly employed detection method (Electromagnetic induction
method) enables use in adverse environments with water and
cutting oil.
• Specially designed output cables are developed to maintain the
water resistant structure.
• No over speed error since it employs absolute scale which reads
the absolute value.
• Once an absolute zero (origin) point is set, the Digimatic Scale
Unit shows its absolute distance from the point whenever
turned on rather than “0.00”.
Metric
Resolution
0.01mm
Order No.
572-600
572-601
572-602
Accuracy
0.03mm
0.03mm
0.03mm
Mass
230g
250g
270g
Range
4”/100mm
6”/150mm
8”/200mm
Order No.
572-613
572-614
572-615
Accuracy
.001”/0.03mm
.001”/0.03mm
.001”/0.03mm
Mass
230g
250g
270g
Range
4”
6”
8”
Order No.
572-610
572-611
572-612
Accuracy
.001”
.001”
.001”
Mass
230g
250g
270g
Inch/Metric
Resolution
.0005”/0.01mm
APPLICATIONS
•
•
•
•
•
Range
100mm
150mm
200mm
Inch
Positioning of tables, etc., in adverse environments
Measuring equipment to be used on the workshop floor
Measurement of structure displacements
Positioning of plain machine tools
Measuring equipment to be used outside (in the rain)
Resolution
.0005”
Dimensions
Technical Data
Unit: mm
L1
L2
LCD
Origin-set, ZERO/ABS set, power on/off, inch/mm conversion
(inch/mm type only), SPC data output
Battery:
SR44 (938882) x 1pc.
Battery life:
Approx. 1.5 years under normal use
Maximum response speed: Unlimited
Dust/Water protection level: Conforming to IP66
Alarm:
Low battery voltage, counting value composition error
Operating temperature: 0°C to 40°C
4.6
57.5
6.6
32.6
Display:
Functions:
8
40.9
31
16
3.5
OPTIONAL ACCESSORIES
Order No.
05CZA624
05CZA625
342
12
1.6
24
Order No.
572-600
572-601
572-602
572-613
572-614
572-615
572-610
572-611
572-612
Description
SPC cable (1m), see page 34.
SPC cable (2m), see page 34.
6
35
7
10
2.3
15
2-M3x0.5
13.5
DIGIMATIC SCALE UNITS
FEATURES
L1
209mm
259mm
311mm
209mm (8.29”)
259mm (10.20”)
311mm (12.24”)
8.29”
10.20”
12.24”
L2
185mm
235mm
287mm
185mm (7.28”)
235mm (9.25”)
287mm (11.30”)
7.28”
9.25”
11.30”