1: Boot from DVD. 2: Click on Setting Icon→ Disk tools→Disk Utility 3

1: Boot from DVD.
2: Click on Setting Icon Disk toolsDisk Utility
3: Select 320GB HDD in left side of window.
4: Select Format Drive
5: Select GUID Partition Table from dropdown menu.
6: Select Format:
7: Confirm Format.
8: It will show Error just close this and restart the PC.
9: It will ask to remove CD but don’t remove and press ENTER.
10: Again boot from DVD go to Disk tool Partition Editor
11: Select Unallocated Spare.
12: Click On Partition then New.
13: New window will appear as below. Click on ADD.
14: Click On the Right sign as below to apply all operations.
15: Click APPLY.
16: Process will start, Wait till it complete.
17: Click Close.
Not : Now your hard disk is fully formatted and ready for deploy.
Image Restoration
18: Select Redo Backup And recovery.
19: Click Restore.
20: Click Next.
21: In select source menu don’t change anything and click next…
22: In select Image window click in open icon as below.
23: Select File System in left panel then go to CDROM in right panel.
Double click on it.
24: Double click on SSA Final.
25: Select SSAfinalBACKUP.backup
26: Select Open.
27: Select Next.
28: Click Yes on warning.
29: First Time error will come as below. Just restart the PC(without
removing CD) and repeat again from
Sequence no. 18….
30: Process will start just wait for finish.
31: Click close and restart the PC. Please remove the PC (Remove the
DVD while restarting).
32: restart the PC with Hard disk and use hcl@123 for login for all user..