LiftLine LED - Dado Lighting

LiftLine
1.5
Type:
Ordering
C
H
L
Ship Complete Fixture
Ship Housing and Driver
Ship LED and Lens
Series
LL15
LiftLine LED 1.5 inch width
Lamping
1AML
2AML
Standard Output LED 4.9w/ft (16w/m)
High Output LED 9.8w/ft (32w/m)
Color
27
30
35
2700K, 85+ CRI
3000K, 85+ CRI
3500K, 85+ CRI
1.5” wide continuous lines of light for elevators
& thresholds
Note: Fixture length includes .120”
(3mm) end cap at each end of fixture
Wire Harness 1
2 or 3
2P
R
G
B
Red
Green
Blue
Single
Separate harnesses for multiple color
sections in same housing
Two harnesses with two colors parallel entire
length
W
White
Driver
R
Remote
Start End
S
D
Straight End
Internal Divider (Use to separate colored
sections within the same housing)
Length
xx
xxFC
xx is distance in inch or mm
Allows for housing to be field cut for exact fit
(must use H shipping option)
Can be connected to emergency lighting circuit
Transition
Red, Green, Blue colors available for indicator lights
(Only if lens
changes direction)
LTxx
Left Turn same plane (degrees 90° to 179°)
RTxx Right Turn same plane (degrees 90° to 179°)
ICxx
Inside Corner (degrees 90° to 179°)
(Add Lengths & Transitions to form pattern)
Length per Specifier
Lens
General, emergency & indicator lighting for
elevators and their thresholds
Order in any length for precise fit
Mounts within metal, stone or wood surfaces
in head trimmer, door frame or elevator interior
Provides minimum 5fc (50Lx) or 10fc (100lx) on
threshold per ASME A17.1 2.11.10.2
1.75”
(44mm)
1.75”
(44mm)
With 2P Wire
Harness
S
1.5”
(38mm)
.120”
(3mm) wide lip
IC90
RTxx
LTxx
Finish End
S
D
Lip Color
NA
Natural anondiozed BK
BZ
Bronze
__
(Add E if entire fixture needs color)
Units
mm
in
Options
CL2Pxx
Driver*
R
Straight End
Internal Divider (Use to separate colored
sections)
Black
Other
mm
inches
Longer length CL2P supply cable
(std is 15ft) to reach remote power supply.
Remote
Drive Qty Per Power Supply X
Blank for MLV type
Factory determined with N100 or D010 type
Type
MLV
N100
DO10
Mag low voltage, 100W max.
Electronic, 100W max.
Dimming via 0-10Vdc
Voltage
UNV
-
Universal 120-277V for N100 or D010 type
120, 220 or 277 for MLV type
* See Power Supplies spec sheet for additional versions and details
Environmental Data
For Standard Output lamping at 3000k:
W: 4.9W/ft (16W/m)
LLD: 50,000hrs @ 70%lm
20ft (6M) on one 100w driver
12ft (3.7m) on one 60w driver
For High Output lamping at 3000k:
W: 9.8W/ft (32W/m)
LLD: 50,000hrs @ 70%lm
10ft (3M) on one 100w driver
Specifications and dimensions subject to change without notice. Protected under U.S. Pat. 8109659 and other patents pending.
1002 05152014
1.5”
Shipping
Temp range: 0° ~ 90°F (-20 ~ 30°C)
No Mercury, No UV, No Flicker
Warranty: 5 years
[email protected]
v/f 877.323.6584
LiftLine
1.5
Housing
Extruded aluminum housing mounts via screws to framing.
Surface material* (metal, tile, stone, etc.) can abut housing sides.
* If wood on 3 sides, drill 3/4” holes behind fixture every 6” to ensure
adequate venting.
Anodized for superior thermal performance.
Housings ship with 15ft CL2P cable attached to back, to reach remote
power supply. Longer lengths optional.
One-piece extrusions up to 12ft (3.66m). Multiple extrusions
couple together with brass barrel connector & bolt assembly
plus alignment pins for secure fit and straight alignment.
End caps attach via single screw connecting to brass barrel nut
plus alignment pins.
Inside corner sections overlap for even illumination without direct
view of LEDs. Tab aligns housing sections at corner.
ETL listed, IC rated, damp location.
Modifications
Runs can be provided to the nearest 1/16” or 1mm.
“FC” field cutting option reduces lead time for perfect architectural fit.
Housings may be cut on site up to 6” parallel to straight or factory
mitered end. Then LED panels are made at factory to fit installed length.
For unique custom work, such as corners and patterns, consult
factory for shop drawings.
Ends
“S” Machined aluminum end to start or stop a section.
Transitions
When lens changes directions (Minimum length 3.875” or 98mm per side).
“LT” Left Turn same plane (degrees 90° to 179°); pre-assembled at factory.
“RT” Right Turn same plane (degrees 90° to 179°); pre-assembled at factory.
“IC” inside corner between two planes. Housings overlap and tab together
for alignment.
“OC” outside corner around two planes; pre-assembled at factory. 90°
standard, consult factory for other angles.
LED
Low wattage white light LED produces even distribution with no shadows.
Binned within 3 MacAdam ellipses.
Blending and overlap keep color and light output uniform.
May select Low or High output versions when ordering.
Optics
“CP” Chicago Plenum rated housing with 6ft whip of FMT attached.
Light guide panel diffuses multiple LED sources.
Panel plugs into housing via DC barrel connects & is secured with screws
for quick & easy replacement.
Snap-in high transmission acrylic lens, up to 24ft per section, provides a
matte white finish & even distribution.
Lens fits flush with finished bottom of housing.
One-piece, extruded housing ensures constant lens retention along length.
“CP”
CP Chicago Plenum rated housing with 6ft of FMT attached.
R-MLV Driver
R-x-N100 Driver
Options
Economical magnetic remote mounted power supply with 24Vdc
Constant Voltage output for simple class 2 installation.
120V or 240V or 277V input, 50/60Hz.
Short circuit and overload protected.
Non-IC installations.
Listed for 90 C conductors with 1/2” trade size knock outs.
Housing is 304SS matte stainless steel.
See Power Supplies spec sheet for additional information.
Electronic remote power supply with up to 3 100w drivers with
24Vdc Constant Voltage output for simple class 2 installation.
120V thru 277V input, 50/60 Hz.
Short circuit and overload protected.
Non-IC installations standard. Consult factory for IC installations.
Listed for 90 C conductors with 1/2” trade size knock outs.
Housing is die-formed 16ga CRS with white painted after fabrication
finish.
May be surfaced or recessed mounted in 2x4 walls or above
accessible ceilings..
See Power Supplies spec sheet for additional information
R-x-N100-UNV
REMOTE POWER SUPPLY
R-XXX-UNV SERIES
24VDC CLASS 2 WIRING
(100W MAX PER CIRCUIT)
FIELD CONNECTIONS
(BY INSTALLER)
2.65”
(68mm)
INTERNAL FIXTURE WIRING
120-277 VAC
10”
LINE
NEUTRAL
GRD
(254mm)
13.50”
LED MODULE
IN HOUSING
(+) 24V DC
N100
(-) 24V DC
Qty 1, 2 or 3
CL2P CABLE
(CLASS 2 PLENUM RATED, WHITE SHEATH)
(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)
(343mm)
R-MLV-xxx
INTERNAL FIXTURE WIRING
LED MODULE
IN HOUSING
120-277 VAC
12”
(305mm)
(CLASS 2 PLENUM RATED, WHITE SHEATH)
3” (76mm)
x
3.75” (95mm) Height
(-) 24V DC
(+) 24V DC
CL2P CABLE
LINE INPUT
NEUTRAL
GRD
11.50”
(292mm)
FIELD CONNECTIONS INSIDE POWER SUPPLY (BY INSTALLER)
7” (178mm)
LED MODULE
IN HOUSING
LiftLine
1.5
Photometric Data
BALLabs
Independent LM-79
Test No. 17943.0
Candlepower Distribution (cd)
Cat No.: LL15-2AML-35-1-W-R-S-24-S-in *
Meanwell Driver No.: LPV-20-24 operating at 120v
Total Lumens: 1142
* Multiply all data by .50 for 1ML lamping
Multiply all data by .60 if 2P wire harness is used
Angle
Along
0°
5°
10°
15°
20°
25°
30°
35°
40°
45°
50°
55°
60°
65°
70°
75°
80°
85°
90°
410
415
407
399
385
367
348
324
300
272
243
209
178
149
111
81
48
23
0
45°
410
411
400
394
378
359
338
313
291
267
234
201
172
141
106
78
48
22
0
Across
410
407
399
389
372
355
334
310
287
260
229
197
165
137
105
77
45
24
0
This is an absolute test per LM-79-08
Luminous Length: 24”
Width: 2.5”
Zonal Lumen Summary
Zone
0-30°
0-40°
0-60°
60-90°
90-180°
0-180°
Lumen
% Luminaire
315
512
894
242
0
1,136.00
27.7%
45.1%
78.7%
21.3%
0%
100%
Luminance Data (cd/m2)
Angle
45°
55°
65°
75°
85°
Along
16411
15530
14986
13262
11252
45°
16065
14960
14213
12788
10783
Across
15660
14604
13826
12630
11721
LiftLine
1.5
42”
2
Ex. Cat #
Ex. Cat #1
Ex. Cat #3
Ex. Cat #4
96”
10
13
10
FC levels for typical elevator threshold
using 2ML fixture as shown in header.
(0/50/0 reflectance values)
Denotes the start & power feed point of each run. Can be
at either end; whichever is closest to remote power supply.
Longer runs or multiple colors may require additional
feed points
Ex. Cat #s (xx denotes lengths)
(1) White light in head trimmer over door threshold
C-LL15-2AML-1-W-R-S-xx-S-NA-in
(2) White light with red & green indicator ends in head trimmer over door threshold
C-LL15-2AML-3-R-30-G-W-R-S-xx-D-xx-D-xx-S-NA-in
(3) Square pattern in ceiling of cab
C-LL15-2AML-1-30-W-R-LT90-xx-LT90-xx-LT90-xx-LT90-xx-mm
(4) White light in head trimmer and red & green indicator lights in door jamb
C-LL15-2AML-3-30-G-R-W-R-S-xx-IC90-xx-D-xx-S-NA-in
Notes:
K>=BD;C502C>AH5>A74;?F8C70??;820C8>=B=>CB7>F=>A0BB8BC0=24F8C7B?4285H8=6>A34A8=6
K(7>?3A0F8=6BF8;;14?A4?0A435>A0;;?0CC4Ans and straight runs upon request.
3/4" VENT HOLE
EVERY 6"
BLOCKING
WALL SURFACE
HEAD TRIMMER