MARINE - Rockford Fosgate

Transcription

95
NEW PRODUCTS
NEW POWER
SUBWOOFER
AMPLIFIERS READY
FOR THE ELEMENTS
POWERPUNCH
7
MARINE
SOURCE UNITS & REMOTES
NEW
POWER SLIM
BUYER’S GUIDE CONTENTS
27
7
MOBILE AMPLIFER
FAMILIES
15
TECHNOLOGIES
AMPLIFIER
17
LINE UP
AMPS COMPARED
19
GUTS
OF AN AMPLIFIER
27
MOBILE SUBWOOFER
FAMILIES
35
TECHNOLOGIES
SUBWOOFER
37
LINE UP
SUBS COMPARED
40
ANATOMY
OF A SUBWOOFER
51
MOBILE SPEAKER
FAMILIES
59
TECHNOLOGIES
SPEAKER
61
LINE UP
SPEAKERS COMPARED
63
FRAMEWORK
OF A SPEAKER
75
VEHICLE INTEGRATION
PRODUCTS
85
MOTO/MARINE AMPLIFER
FAMILIES
94
GUTS
OF AN AMPLIFIER
99
MOTO/MARINE SUBWOOFER
FAMILIES
103
ANATOMY
OF A SUBWOOFER
107
MOTO/MARINE SPEAKER
FAMILIES
111
FRAMEWORK
OF A SPEAKER
117
MOTO/MARINE SOURCE UNITS
AND WIRED REMOTES
121
DNA
OF A SOURCE UNIT
127
MOTORCYCLE
AUDIO PRODUCTS
51
85
117
©2015 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE®, PUNCH®, 3SIXTY® and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other
countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Rockford Corporation is under license. The word Harley-Davidson® is a registered trademark of Harley-Davidson, Inc. and is for reference only. The BMW® name is a registered trademark and is for reference only. All other
trademarks are the property of their respective owners. Specifications subject to change without notice.
“Made for iPod” and “Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
AMPLIFIERS
SUBWOOFERS
SPEAKERS
UNPRECEDENTED POWER AND CONTROL
YEAR
LIMITED
WARRANTY
OHMS
YEAR
dB/OCT
12/24
2 +1
2/1
CROSSOVER
SLOPE
FREE*
EXTENDED
WARRANTY
IMPEDANCE
STABILITY
HISTORY OF PERFORMANCE
dB/OCT
12
CROSSOVER
SLOPE
YEAR
OHMS
YEAR
1 +1
4/2
LIMITED
WARRANTY
FREE*
EXTENDED
WARRANTY
IMPEDANCE
STABILITY
THE PERFECT FIRST STEP
LIMITED
WARRANTY
OHMS
AMPLIFIERS
AMPLIFIERS
YEAR
dB/OCT
12
1
4/2
CROSSOVER
SLOPE
IMPEDANCE
STABILITY
*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE
ALL THE POWER,
HALF THE SPACE
DELIVERING UNPRECEDENTED POWER AND CONTROL
A culmination of over 30 years of pushing the envelope
in amplifier design, the Power series of amplifiers takes
everything that we’ve learned about power output and heat
management and puts it into a single package.
With technologies such as our Class AD and BD constant
power circuits, Rockford engineers squeeze every drop
of power out of these amps they can get. So, not only will
your system be the envy of all your friends because it’s the
MODELS SHOWN | T400-2, T2500-1bdCP, T400-4, T1000-4ad
9
2015 BUYER’S GUIDE
loudest, but it’s going to sound amazing to boot.
Heat management is always a concern. Too much heat will
not only shut down your amp but may eventually kill it. We
combat this by using specially designed cast aluminum heat
sinks as well as our latest Dynamic Thermal Management
circuitry to maximize performance while managing the heat
production. Simply put, a cooler amp is a happy amp and will
run for a very long time.
After seeing a demand
in the marketplace for small
chassis amplifiers, our engineers
took amplifier design to the next level.
They designed amplifiers that could fit in
small spaces but also deliver on power and
performance. The goal set was to take the elements
of our larger chassis Power series amplifiers, along with
our latest technology, and put them in a smaller footprint
design without sacrificing power or performance.
Thus, our Power small chassis amplifiers were born. These amplifiers are
built on our proven Class AD and BR circuit designs allowing the amplifiers
to be over 40% smaller while producing more power than the comparable full
size Power version. Heat is managed with our 3-stage cooling system using forced
induction air flow allowing you to really push these amps without concern of overheating.
MODELS SHOWN | T500X1br, T400X2ad
BOOSTED RAIL
PRODUCING MORE POWER THAN EVER BEFORE
IDEAL FOR ALL YOUR MOBILE TOYS
Building on the legacy that began over 35 years ago, we
completely redesigned our Punch series. This was not just
a refresh of their look but also the perfect time to add-in the
latest innovations in amplifier design. With a sleek new style
thanks to our brushed, cast aluminum chassis with stealth
top mount controls, these new Punch amplifiers truly grab
the attention of anyone who sees them.
Rockford’s original small chassis amplifier, the PBR series
was developed with a few goals and a select group of
customers vehicles in mind. We wanted a small footprint
amplifier that produced a lot of power but didn’t put a
strain on a vehicles electrical system. We had our eyes
on the motorcycle and UTV markets knowing that audio
solutions for many of these customers were few and
what was available wasn’t the highest in quality.
MODELS SHOWN | P1000X1bd, P400X2, P300X2, P1000X5
11
But of course, these amps are more than just pretty, they’re
feature rich and powerful. One such innovation is our CLEAN
setup circuit which not only tells you if and when your music
is distorting, but simplifies the setup of the amp. This gets
you listening to your music that much faster. Power has also
been addressed in the new circuit design with all models
easily exceeding their rated power which means not only is
your music clear, but it can get plenty loud.
MODELS SHOWN | PBR500X1br, PBR300X4
We developed the PBR amps to be ultra-efficient by
using the vehicle’s own electrical system for a power
supply and developed our patented “boosted rail”
circuit that stores energy and then releases it when the
demands of the music require it. This means that when
you hit the road or the trails, you can enjoy your music
knowing it is powered by an amplifier built to Rockford’s
high standards.
THE PERFECT STARTING POINT
Our prime amplifiers are a great first choice to get you going. Whether you’re looking to
get into your first audio system or just looking for a Rockford quality amplifier that isn’t
going to break the bank, look no further than the Prime series of amplifiers. Many of the
design innovations that we’ve developed over the years, from how to deal with heat
to maximizing the efficiency of the power supply, have made their way into the Prime
amps allowing us to create a line that is not only high quality, but also at an affordable
cost to you, the customer.
And, like all Rockford amplifiers, we make sure that these not only meet, but exceed
their rated power to ensure that you get every watt possible that you’ve paid your hard
earned money for. Incorporating features such as variable crossovers and our famous
Punch EQ circuit further completes the package making the Prime amplifiers a perfect
choice for your audio system.
MODELS SHOWN | R600X5, R1200-4D, R400-4D
13
T2500-1bdCP
WITH
WITHOUT
Output Power
4000
CONSTANT POWER
3500
U.S. Patent (7,994,857)
3000
2500
Frequency
240
220
200
180
160
140
120
80
100
60
40
20
2000
Music and speakers have a dynamic relationship. As the frequency of music varies, so does the
impedance of the speaker. Rockford Fosgate’s Constant Power circuit design actively monitors
and increases voltage and current as the speaker’s impedance rises with music. Resulting in up
to a 25% increase in total amplifier power.
Products Featuring: CONSTANT POWER
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering,
and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has led
us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make
it Rockford.
+20
+18
DYNAMIC THERMAL MANAGEMENT
+16
+14
+12
PUNCH EQUALIZATION
+10
U.S. Patent (3,883,832)
+8
+6
+4
+2
-0
-2
THERMAL IMAGE WITHOUT
20
50
100
200
500
BASS
Hz
1k
2k
5k
10k 20k
TREBLE
In the early 70’s, Jim Fosgate studied the acoustical properties of automobiles by using a real
time analyzer. Jim discovered multiple problems common in all vehicles; a midbass hump, a
steep high frequency roll off and reduced bass response. This research lead to adding Punch EQ
to Rockford Fosgate amps to help correct the acoustical deficiencies found in the automotive
listening environment. The new Punch EQ2 is an on-board equalization circuit that when set to
Low-Pass (LP) operation, becomes a variable Bass Boost. When set to High-Pass (HP) operation,
it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass
and Treble frequencies are boosted.
Products Featuring: on-board PUNCH EQ
HEATSINK
ALUMINIUM
MOSFET
THERMAL
GREASE
CERAMIC
MAXIMUM EFFICIENCY HEAT
SINK APPLICATION
MEHSA3 heat management technology takes heat sink efficiency to a new level. The key was
to create a dielectric layer between the ceramic topside and the aluminum base that retains
all of the electrical isolation and capacitive coupling of the early material increasing its thermal
conductivity. The higher power handling results in a 20% reduction in thermal impedance.
Products Featuring: MEHSA
Our engineers at Rockford Fosgate have developed an award winning cooling design called
Thermal Management). This patent pending design seamlessly manages the
output and power supply temperatures, while evenly distributing the excess heat across the
entire amplifier.
T H E R M A DTM
L I M A G(Dynamic
E WITH
Products Featuring: DTM
THERMAL IMAGE WITHOUT
THERMAL IMAGE WITH
NON MULTIPLYING ADVANCED DECISION
Safe output protection is handled by our proprietary NOMAD circuit. NOMAD is an analog
computer designed to calculate the maximum level of safe current allowable for each output
device (based on their instantaneous voltage drop). This allows the protection to be much more
precise than ever before; offering protection against:
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
Products Featuring: NOMAD
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These
guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated
marketing ratings.
Products Compliant with CEA-2006
4/2/1
The ability to deliver continuous total RMS rated power to the speaker(s) in any impedance
ranging between 4 ohm through 1 ohm.
Products Featuring: 4/2/1
C.L.E.A.N.
U.S. Patent (8,712,066 B1)
Time and sophisticated test equipment have been replaced with Rockford’s integrated level
setting technology called CLEAN (Calibrated Level Eliminates Audible Noise). Using simple LED
indicators to identify both signal clipping from the audio source and the output level clipping to
the speakers, this precise level set-up eliminates speaker damaging distortion.
YOUTUBE.COM/ROCKFORDFOSGATE
WATCH DETAILED VIDEOS ON OUR AMPLIFIER TECHNOLOGIES.
15
Products Featuring: CLEAN
CLASS AD - The Rockford Fosgate ad topology brings
CLASS D - High efficiency amplifier design that
reduces current consumption from the charging system
RMS
CLASS BR
(Patent 8,212,620) - To achieve higher
efficiency with lower distortion, Rockford’s BR topology
combines, Cycle-by-Cycle, an indirectly coupled high/
low voltage rail linear topology with a switched high/low
voltage linear rail topology. This combination yields an
unsurpassed power density (watts per cubic inch).
CLASS AB -
The combination of a class B power
output with the class A low distortion attributes make
class AB the most common amplifier topology in the
electronics industry.
FULL RANGE CLASS D - High efficiency
amplifier design that reduces current consumption from
the charging system
85%
85%
90%
150-300watts
70%
70%
68%
400-1000watts
400-600watts
83%
85%
CLASS
RMS
500-1200watts
EFFICIENCY
CLASS
RMS
EFFICIENCY
500-1000watts
300-1000watts
1CH / 2CH / 4CH
1 CHANNEL
500-2500watts
400-600watts
2CH / 4CH
our high efficiency BD amplifier design to a full range
application. Using our Dynamic Frequency Switching to
increase the switching frequency during lower output levels for
better signal resolution. Coupled with Post Choke Feedback
Filtering to compare the input signal to the output signal at the
speaker connector removing any unwanted distortion. These
technologies eliminate the inherent switching noise associated
with typical class D designs.
The trans•ana topology operates
the output stage with its full voltage gain, which allows
the input stage to operate from a low voltage regulated
supply. The signal is then shifted up in level to the high
voltage section by the driver stage which forms an
active node at ultrasonic frequencies. This results in a
very stable, highly linear operation.
EFFICIENCY
BD topology is more efficient than typical class AB and has
lower distortion than class D designs. Rockford BD amplifiers
are 75-80% efficient vs. 20-60% efficient class AB amplifiers.
Delivering more power from your amplifier with less drain on
your vehicles electrical and charging system.
CLASS TA -
CLASS
- The Rockford Fosgate
RMS
(Patent RE40550)
EFFICIENCY
CLASS BD
CLASS
Amplifier topology is the arrangement of parts in an amplifier design.
These designs are broken out into ‘classes’. Each class has tradeoffs,
making the various classes suited for various applications…like Class
D or BD with higher RMS power, but undesirable noise in the higher
frequencies making it better suited to power subwoofers.
1CH / 2CH / 4CH
AMPLIFIER PERFORMANCELINEUP
TOPOLOGIESEXPLAINED -
500watts
300-500watts
77%
73%
WIDTH
17
WIDTH
WIDTH
WIDTH
DUAL-FAN COOLED
101
GRAMS
WIDTH
BOOSTED RAIL
HEIGHT
101
GRAMS
HEIGHT
137
GRAMS
HEIGHT
299
GRAMS
HEIGHT
326
GRAMS
HEIGHT
amplifier cross sections show the amount of heatsink material (Thermal Mass). A greater thermal mass means
THERMAL MASS PER INCH - These
increased play time and lower device distortion.
TH E G UT S
500WATTS
1000WATTS
1500WATTS
2500WATTS
8.1”
OF AN AMPLIFIER
400WATTS
600WATTS
400WATTS
600WATTS
800WATTS
1000WATTS
Die-Cast Aluminum w/DTM™
Organizing the combination of parts that make up the guts of an amplifier tremendously
impacts its performance capabilities. A change in topology type matched with a variation
of power supply components deliver a higher power output and enhanced audio quality.
Rockford’s proprietary amplifier topologies and electrical technologies in our amplifier
lineup will drive your system to new heights.
C-Clamp compression
Balanced Differential
2.1”
TO-247 MOSFETs w/MEHSA™
14.9”
Ferrite Core Coated/Booted Transformer,
with CONSTANT POWER™
HEAT SINK
MOSFETS
• Superior sound quality achieved using audiophile grade components.
• Proprietary Dynamic Thermal Management circuit manages heat production
allowing you to play harder longer without overheating.
• Select models utilize our Constant Power circuit giving you up to 25% more
power where you want it when you want it.
TERMINALS
RCA
MATERIAL HIERARCHY
GOOD
19
*T1500-1bdCP MODEL SHOWN
POWER SUPPLY
CIRCUIT BOARD
BESt
4 layer 3 oz. Copper Circuit Board
Heat Sink - This heavy outer shell
protects the parts inside by transferring
away the heat made reproducing an
audio signal (music).
500WATTS
Power Supply - A.K.A the transformer,
as the name suggests it takes the
incoming voltage and converts it to a
useable voltage for speakers.
Terminals - These are the connection
points for the speakers or subwoofers
and the power source(battery) for
the amplifier.
RCA - These are the connection
points for the audio signal(music)
coming from the audio source
(radio). RCA connectors are most
commonly used.
400WATTS
4.3”
Extruded Aluminum
MOSFETs - A type of transistor used
to amplify audio signal(music). You’ll
see more of these guys lined up as
wattage demands increase.
Circuit Board - Sometimes referred to
as the PCB, is used to connect thisto-that through tiny lines of copper
across multiple layers of pathways.
400WATTS
7”
1.6”
Molex; Set-Screw or Pigtail
Balanced Differential; High-Level Capable
with Auto Turn -On
Ferrite Core Coated/Booted Transformer,
with CONSTANT POWER™
• Over 40% smaller than full size Power amps without sacrificing performance.
• Maximizes cooling using our forced induction cooling fan system.
• Simplified setup using our C.L.E.A.N. circuit technology.
*T400X2ad MODEL SHOWN
300WATTS
400WATTS
500WATTS
1000WATTS
300WATTS
400WATTS
500WATTS
1000WATTS
400WATTS
600WATTS
250WATTS
500WATTS
750WATTS
1200WATTS
1000WATTS
7.8”
6.8”
600WATTS
Die-Cast Aluminum
C-Clamp compression
Set-Screw
with Auto Turn-On
Ferrite Core Coated/Booted
Transformer
*P1000X1bd MODEL SHOWN
2.4”
2”
TO-220 Bipolar Transistors
300WATTS
13.3”
11.2”
• Built on a legacy over 35 years in the making.
• The C.L.E.A.N. setup circuit ensures maximum performance and
undistorted output.
• Signal inputs can accept either speaker level or RCA level input signals
without needing a convertor.
with Auto Turn -On
400WATTS
600WATTS
6.8”
Die-Cast Aluminum
Set-Screw
6.5”
1.5”
2”
TO-220 MOSFETs
11.1”
Storage Capacitor
*PBR300X1 MODEL SHOWN
*R250X4 MODEL SHOWN
Extruded Aluminum
Molex; Set-Screw or Pigtail
Ferrite Core Transformer
• Custom engineered high mass heat sink design for maximum heat dissipation.
• Top mount controls for ease of installation and setup.
300WATTS
4.3”
21
250WATTS
300WATTS
Die-Cast Aluminum w/
DTM™
300WATTS
500WATTS
150WATTS
• Small chassis, application specific amplifier design accepts speaker level or
RCA level input signals.
• Perfect for vehicles with low current capable electrical systems.
• Three times the power of similar sized A/B models.
• Ultra-efficient 4-channel amplifier design using the latest full range
Class D technology.
• Amplifiers are optimized for 4-channel front/rear systems.
*R600-4D MODEL SHOWN
Impedance
Stability
Protection
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L11.41”
(Small chassis)
T600-2
200x2 @ 4 ohms
300x2 @ 2 ohms
600x1 @ 4 ohms bridged
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L13.66”
(Medium chassis)
T400-4
60x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L13.66”
(Medium chassis)
Differential RCA inputs
T600-4
100x4 @ 4 ohms
150x4 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L14.91”
(Large chassis)
Differential RCA inputs and
RCA pass thru
150x4 @ 4 ohms
150x4 @ 2 ohms
200x4 @ 1 ohm
20Hz - 20kHz
<1.0%
150mV - 5V
>95dB
>50dB
T800-4ad
H 2.14” x W 8.14” x L13.66”
(Medium chassis)
Class ad w/ Constant
Power
250x4 @ 4 ohms
250x4 @ 2 ohms
250x4 @ 1 ohm
20Hz - 20kHz
<1.0%
150mV - 5V
>95dB
>50dB
T1000-4ad
H 2.14” x W 8.14” x L14.91”
(Large chassis)
Power and 4/2/1
T500-1bdCP
300x1 @ 4 ohms
500x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 250Hz
<0.5%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x L11.41”
(Small chassis)
Class bd w/
Constant Power
T1000-1bdCP
700x1 @ 4 ohms
1000x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x L13.66”
(Medium chassis)
T1500-1bdCP
1000x1 @ 4 ohms
1500x1 @ 2 ohms
1500x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x L14.91”
(Large chassis)
1500x1 @ 4 ohms
2500x1 @ 2 ohms
2500x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x L21.9”
(X-Large chassis)
T400X2ad
200x2 @ 4 ohms
200x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>110dB
>60dB
H 1.6” x W 4.3” x L7”
(Compact chassis)
T400X4ad
100x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>110dB
>60dB
H 1.6” x W 4.3” x L8.3”
(Compact chassis)
T500X1br
175x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 220Hz
<1.0%
150mV - 12V
>110dB
N/A
H 1.6” x W 4.3” x L8.3”
(Compact chassis)
Class br
P300X2
100x2 @ 4 ohms
150x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
TRANS•ana
P400X2
125x2 @ 4 ohms
200x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 11.0”
(Small chassis)
P500X2
150x2 @ 4 ohms
250x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 13.3”
(Medium chassis)
P1000X2
300x2 @ 4 ohms
500x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 15.0”
(Large chassis)
P400X4
50x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 11.0”
(Small chassis)
High level capable with
auto turn-on balanced
differential RCA inputs
75x4 @ 4 ohms
150x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 13.3”
(Medium chassis)
differential RCA inputs and
RCA pass thru
75x4 + 200x1 @ 4 ohms
125x4 + 400x1 @ 2 ohms
N/A + 500x1 @ 1 ohm
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 15.0”
(Large chassis)
TRANS•ana &
Class bd
4 layer 2 oz. copper
circuit board
12 dB/oct - variable High or Low
Pass and All Pass
12 dB/oct - fixed infrasonic
2 ohm stereo / 1 ohm mono
rated
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
Focused mass die-cast heatsink /
DTM™- Dynamic Thermal Management /
MEHSA™- Maximum Efficiency HeatSink
Application
P300X1
200x1 @ 4 ohms
300x1 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
N/A
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
TRANS•ana
circuit board
Pass and All Pass
2 ohm mono rated
P400X1
200x1 @ 4 ohms
400x1 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
N/A
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
Application
P500X1bd
150x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 250Hz
<1.0%
150mV - 12V
>100dB
N/A
H 2.4” x W 7.8” x L 11.0”
(Small chassis)
12 dB/oct - variable Low Pass
1 ohm mono rated
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
P1000X1bd
300 @ 4 ohms
600x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
<1.0%
150mV - 12V
>100dB
N/A
H 2.4” x W 7.8” x L 13.3”
(Medium chassis)
Class bd
Additional
Features
Focused mass die-cast heatsink / 4-Point
Thermal Monitoring / MEHSA™- Maximum Efficiency HeatSink Application
Speaker
Terminals
Power
Application
Power
Terminals
P1000X5
TRANS•ana
RCA Inputs
<0.05%
Heatsink
Design
Dimensions
Variable
Crossover
Channel
Separation
Circuit Board
S/N Ratio
20Hz - 20kHz
Topology
Input
Sensitivity
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
THD+N @
Rated Power
stable
120x2 @ 4 ohms
200x2 @ 2 ohms
P600X4
Pass and All Pass
T400-2
T2500-1bdCP
23
circuit board
Frequency
Response
Rated Power
[ AMPLIFIER SPECIFICATIONS [
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB to
+18dB @ 45Hz and/or 0dB to +12dB
@ 12KHz with optional PEQ
Balanced differential RCA
inputs and RCA pass thru
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
+18dB @ 45Hz with optional Punch
Equalization
Balanced differential
panel mount RCA and RCA
pass thru
stealth proprietary
1/0 Ga. 4mm allen
head set-screw
cast zinc connector
stealth proprietary
8 Ga. 4mm allen
head set-screw
cast zinc connector
Equalization and BDSync or Master/
Slave
8 Ga. Quick Connect terminal
16 Ga. 4-pin Molex
connector
@ 12.5KHz with optional Punch
Level Control(PLC2)
10 Ga. nickel plated
Quick Connect
Level Control(PLC2)
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Level Control(PLC2)
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Level Control(PLC2)
RCA pass thru
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Level Control(PLC2)
Balanced differential RCA
inputs and RCA pass thru
Differential RCA inputs
Differential RCA inputs and
RCA pass thru
circuit board
circuit board
circuit board
1 ohm mono rated
Pass and All Pass
rated
1 ohm mono rated
Pass and All Pass
rated
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
Application
Dual fan forced induction cooling
Application
RCA pass thru
75x4 @ 4 ohms
20Hz - 20kHz
<0.5%
150mV - 11V
>100dB
>50dB
H 1.5” x W 4.25” x L 6.75”
75x1 @ 4 ohms
150x1 @ 2 ohms
300x1 @ 1 ohm
20Hz - 250Hz
<0.2%
150mV - 11V
>105dB
N/A
H 1.5” x W 4.25” x L 6.75”
175x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 20kHz
<0.1%
150mV - 11V
>105dB
N/A
H 1.5” x W 4.25” x L 8.25”
R150X2
50x2 @ 4 ohms
75x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
H 2.0” x W 6.8” x L 11.2”
R250X4
40x4 @ 4 ohms
60x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
H 2.0” x W 6.8” x L 11.2”
R300X4
50x4 @ 4 ohms
75x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
H 2.0” x W 6.8” x L 13.2”
R400-4D
75x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 9.1”
R600-4D
100x4 @ 4 ohms
150x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 11.1”
50x4 + 200x1 @ 4 ohms
75x4 + 300x1 @ 2 ohms
150x2 + N/A @ 4 ohms
bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
R600X5
R250X1
150x1 @ 4 ohms
250x1 @ 2 ohms
20Hz - 250Hz
<1.0%
150mV - 12V
>100dB
R500X1D
300x1 @ 4 ohms
500x1 @ 2 ohms
20Hz - 250Hz
<1.0%
150mV - 12V
R750-1D
250x1 @ 4 ohms
500x1 @ 2 ohms
750x1 @ 1 ohm
20Hz - 250Hz
<1.0%
R1200-1D
400x1 @ 4 ohms
800x1 @ 2 ohms
1200x1 @ 1 ohm
20Hz - 250Hz
<1.0%
PBR300X4
PBR300X1
PBR500X1
circuit board
12 dB/oct - 80Hz fixed High or
Low Pass and All Pass
rated
• Short Circuit
• Thermal
• Low Impedance
circuit board
Class ab
Single layer 2 oz. copper
circuit board
12 dB/oct - variable High or
Additional
Features
Class br
Speaker
Terminals
H 1.5” x W 4.25” x L 6.75”
Power
Terminals
Topology
>50dB
RCA Inputs
Dimensions
>100dB
Heatsink
Design
Channel
Separation
150mV - 11V
Protection
S/N Ratio
<0.5%
Impedance
Stability
Input
Sensitivity
20Hz - 20kHz
Variable
Crossover
THD+N @
Rated Power
100x2 @ 4 ohms
150x2 @ 2 ohms
PBR300X2
Circuit Board
Frequency
Response
Rated Power
Inter-locking extruded aluminum
heatsinks w/ pierced metal
recessed badge
RCA/Speaker level pigtailed
Molex connector with auto
turn-on
10 Ga. Molex
connector
16 Ga. pigtailed
Molex connector
Optional PEQ variable from 0dB to
@ 12KHz, variable high-level adjust
and 6V DC offset w/ remote out
4 ohm stereo ONLY
Variable high-level adjust and 6V DC
offset w/ remote out
1 ohm mono rated
Optional PEQ Variable from 0dB
to +18dB @ 45Hz, variable highlevel adjust and 6V DC offset w/
remote out
rated
• Short Circuit
• Thermal
Focused mass die-cast heatsink
RCA or speaker level pigtailed Molex connector input
and RCA pass thru
8 Ga. Molex
connector
12 Ga. pigtailed
Molex connector
4 Ga. set-screw
connector
10 Ga. set-screw
connector
RCA input or speaker level
pigtailed Molex connector
input
Punch EQ selectable from
0dB/+6dB/+12dB @ 45Hz
RCA input and RCA pass thru
+18dB @ 45Hz
Full Range
Class d
circuit board
H 2.0” x W 6.8” x L 13.2”
Class ab &
Class d
circuit board
rated(Front/Rear) and 2 ohm
mono rated(Sub)
• Short Circuit
• Thermal
input
4 Ga. set-screw
connector
10 Ga. set-screw
connector
Punch EQ selectable from
0dB/+6dB/+12dB @ 45Hz(Front/
Rear) and Variable from 0dB to
+12dB @ 45Hz(Sub)
N/A
H 2.0” x W 6.8” x L 11.2”
Class ab
circuit board
2 ohm mono rated
• Short Circuit
• Thermal
4 Ga. set-screw
connector
10 Ga. set-screw
connector
>100dB
N/A
H 2.0” x W 6.8” x L 8.5”
Class d
RCA or speaker level pigtailed Molex connector input
and RCA pass thru
+12dB @ 45Hz and included Punch
Level Control(PLC)
150mV - 4V
>100dB
N/A
H 2.0” x W 6.8” x L 9.1”
circuit board
12 dB/oct - variable infrasonic
1 ohm mono rated
150mV - 4V
>100dB
N/A
H 2.0” x W 6.8” x L 11.1”
ROCKFORDFOSGATE.COM
Don’t forget to use our Woofer Wiring Wizard to properly
wire woofers to your amplifier or our Amp Wire Calculator to
optimize output with properly sized wire.
25
+12dB @ 45Hz
+18dB @ 45Hz and included Punch
Level Control(PLC)
YEAR
WATTS
3000
”
1 5
68
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
VOICE COIL
XMAX
PEAK TO PEAK
M
M
WATTS
600
YEAR
1
LIMITED
WARRANTY
32
UP TO
RMS POWER
HANDLING
2.5
”
M
M
VOICE
COIL
XMAX
PEAK TO PEAK
SUBWOOFERS
SUBWOOFERS
YEAR
WATTS
250
”
1 2
20
LIMITED
WARRANTY
M
M
UP TO
RMS POWER
HANDLING
VOICE COIL
XMAX
PEAK TO PEAK
DESIGNED WITH THE LATEST
WOOFER TECHNOLOGY
The power series truly surpasses the competition
as your premier woofer choice. Power series
subwoofers have always been known for class
leading performance, power handling and output
capabilities. This year our speaker engineers
went back to the drawing board trying to not
only improve on the current design but create
something entirely new. They far surpassed
expectations by not only recreating the T2 series
of woofer from the ground up, but also introducing
our newest additions to the family; the T3 19” and
T1 Slim series of woofers.
Whether you loved the old T2 and want to finally
step-up to the next level or you feel like you’re
grown-up enough to handle our new T3 super
woofer monstrosity, we now offer woofers to make
the competition and your friends cringe in fear. If
you’re tight on space and don’t want to be left out,
our new T1 Slim woofer has all the performance and
output of our full size T1 with an astounding 3 inch
mounting depth. If you’re someone who needs to
be the loudest and baddest on the block, then you
need the Power series woofers in your ride.
MODELS SHOWN | T3S2-19, T2S1-16, T1D212, T0D212, T1S2-12
29
A PERFECT BALANCE BETWEEN “QUALITY” & “QUANTITY” BASS
Punch series woofers are ideal for the customer looking for the best of both worlds. While built on a long standing history
of performance, the punch series woofers can deliver not only output to satisfy you when you want it loud but maintain a
level of sound quality for when you really want to “listen” to your music. With three series within the family, covering both
standard and shallow depth models alike, we have woofers to suit just about anyone’s taste in bass.
OPTIONAL
Taking many design cues from the Power family of products, our speaker engineers continue to improve the series year
after year making the Punch family one of the most sought after woofer lines for music and bass enthusiasts alike. With
features like our Kevlar reinforced cone assemblies for high strength and anodized aluminum voice coil formers to handle
heat buildup in the motor structure under full power situations, these woofers are designed to perform.
ENCLOSURE
and / or
GRILLE
Optional integrated grille available for ALL PUNCH subwoofers. Loaded enclosures available
for all 10” or 12” PUNCH subwoofers and 8”, 10” or 12” PUNCH SHALLOW subwoofers.
MODELS SHOWN | P3D2-12, P2D2-12, P1S2-12, P3SD2-12
31
THE PERFECT FIRST STEP INTO
PERFORMANCE AUDIO
Are you looking to simply add some bass to your existing audio
system? Or better yet, are you wanting to design your first full audio
system from the ground up? Are you looking for a woofer that is built
with quality and performance in mind and has been designed by the
industry’s leading car audio manufacturer? Then our Prime series of
woofers are exactly what you are looking for.
OPTIONAL
ENCLOSURE
Loaded enclosures available for all 10” or 12” PRIME R1 and R2 Shallow subwoofers.
Optional integrated grille available for R1 subwoofers.
MODELS SHOWN | R2D2-12, R2SD2-12, R1S4-12
33
Offering both standard depth and shallow mount models, we’ve
created a family of woofers that deserves to carry the name
Rockford Fosgate. These woofers, like their Punch brethren, are built
using many of the same speaker technologies that Rockford has
been famous for over 30 years for and you won’t break the bank
buying one. Simply put, our Prime series of woofers are held to the
same standards of quality and performance as any other Rockford
woofer but delivered at an affordable price.
FLEX FIT
The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible)
instead of single screw sized holes. This allows for a slight adjustment of the
speaker when mounted.
Products Featuring: FLEX FIT
SLIM
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering,
and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has
lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and
make it Rockford.
SHALLOW
SHALLOW
FELX FIT 2
FLEX FIT 2 AND
CAR MOUNTING
SPEAKER LOCATION
The slot mounted frame pattern allows for variable adjustments to the mounting
position, especially for Euro-Fit installations.
Products Featuring: FLEX FIT 2
VERTICAL ATTACH SURROUND TECHNIQUE
SLIM
Rockford’s proprietary surround technique, VAST, provides up to a 25% increase in
the speaker’s effective radiating cone area without complicated installation issues.
This design alters the typical design and manufacturing technique by eliminating the
large flat glue surface area (the landing) which allows the surround to be shifted for
increased cone area. In turn, both nominal efficiency and maximum output capabilities
are dramatically improved.
Products Featuring: VAST
SHALLOW
SHALLOW
INDUCTIVE DAMPING HEAT SINK
SLIM
SHALLOW
SHALLOW
Secures directly to the top of magnet structure to improve system efficiency by
reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to
reduce voice coil temperature.
Products Featuring: IDHS
EVCC
Our Patent Pending EVCC (Encapsulated Voice Coil Coupling) technology
connects to the woofers voice coil from both the top and bottom and provides a
more secure mounting platform for both the dual spiders and cone assembly.
SLIM
SHALLOW
SHALLOW
Products Featuring: EVCC
SLIM
SHALLOW
SHALLOW
SELECTABLE WOOFER IMPEDANCE FUSED TERMINATION
SYMS
The Patent Pending unique motor structure design allows full excursion capabilities
of the woofers voice coil while allowing an overall reduction in woofer mounting depth.
Removing and inverting the center plug allows nominal impedance of voice coils to quickly
be configured in a Series or Parallel wiring configuration. This removable impedance
selection jumper also provides fused protection in severe overload conditions.
Products Featuring: SYMS
Products Featuring: SWIFT
SLIM
SHALLOW
SHALLOW
SLIM
SHALLOW
SHALLOW
CEA-2031
VERIFIED WITH KLIPPEL
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry
standards. This means your speaker has the capacity to handle power under continuous
demand, not instantaneous power handling that over time can damage voice coils.
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker
engineering personnel must be trained and certified by Klippel prior to using the three
separate Klippel systems to design, develop and test.
SLIM
SHALLOW
SHALLOW
•
•
•
Klippel DA-2 (Designed)
Klippel PM-8 (Developed)
Klippel QC (Tested)
Products Verified with KLIPPEL
WATCH DETAILED VIDEOS ON OUR SUBWOOFER TECHNOLOGIES.
35
SLIM
SHALLOW
SHALLOW
SUBWOOFER PERFORMANCE LINEUP
SPL
SPL - Sound Pressure Level numbers reflect an in-car
response utilizing dual subwoofers in a typical sedan size
cabin at peak power.
XMAX
XMAX - The measured excursion of the subwoofer in one
direction, with Peak-to-Peak covering its entire travel. The
more air a woofer moves, the higher the SPL.
OUTWARD
EXCURSION
PEAK
POWER
37
REST
=
INWARD
EXCURSION
PEAK POWER - The maximum amount of amplifier power
that can be applied to a subwoofer.
a n ato m y
OF A SUBWOOFER
Variations in the anatomy of a subwoofer dramatically changes its performance
characteristics. An increase in voicecoil size coupled with a stronger cone material yields
a higher power handling and increased output. By combining quality materials with
Rockford’s proprietary acoustic technologies, our subwoofer lineup is sure to meet your
system’s demands.
SURROUND
BASKET
CONE
SPIDER
VOICE COIL
MAGNET
Surround - First part in the speakers
suspension, attached to the cone to
maintain the centering of the voice coil
in the magnetic gap.
Spider - Second part of the speakers
suspension, connects the cone and
voice coil to the basket and controls the
travel of the cone assembly.
Cone - A.K.A the diaphragm, this is
the voice of the speaker. Shape and
material dramatically change tonality.
Voice Coil - The brains of the operation,
directing the force from the magnet
to push or pull based on the applied
electrical signal.
Magnet - The heart of speaker, creating
the force to push and pull cone assembly. Size, material, and design may
differ, depending on performance goals.
BESt
GOOD
MATERIAL HIErARCHY
Basket - Also referred to as the frame or
chassis, this is the skeletal system of
the speaker. Here to keep everything
in its place.
RMS
POWER
RANGE
SINGLE 1Ω
SINGLE 2Ω
Injection Molded Foam Surround with VAST™
2000-2500
WATTS
3000
WATTS
SINGLE 1Ω
SINGLE 2Ω
RMS POWER
RANGE
Specially designed to maximize control and
overcome common problems stamp-formed
foam surrounds encounter.
Dual Nomex Progressive Spiders
with Integrated Lead Wires
Three-Layer Glass Fiber/
Aramid Honeycomb/ Glass
Fiber Cone
Three-Layer Glass Fiber/
Aramid Honeycomb/ Glass
Fiber Cone
Extremely rigid yet lightweight
cone design eliminates flex
under high power applications.
Extremely rigid yet lightweight
cone design eliminates flex
under high power applications.
Dual Nomex Progressive
Spiders with Integrated
Lead Wires
True NomexTM spiders maximize excursion
capabilities while maintaining full linear
cone control.
True NomexTM spiders maximize
excursion capabilities while
maintaining full linear cone control.
Triple Stack Segmented Ferrite
Motor Structure
Massive motor structure provides
necessary magnetic force to maximize
output at power handling capabilities.
Stacked Single Layer Edge Wound
Aluminum 5” Voice Coil
Dual Gap Multi‐Pole Neodymium
Push/Pull Motor Structure
Single layer edge wound design allows for
maximum heat dissipation versus multilayer
single voice coils.
Innovative dual-gap design drives the voice
coil in a custom push/pull configuration for
maximum power handling.
Massive Neodymium slug provides
necessary magnetic force to move the
voice coil/ cone assembly to full excursion.
Injection Molded Foam
w/ VAST™
5” Single Layer Edge Wound
Aluminum
w/ VAST™
4” Single Layer Edge Wound
Aluminum
3 Layer Glass Fiber/ Aramid/ Glass Fiber
w/ Aluminum Dust Cap
Die-Cast Aluminum
w/ Integrated Trim Ring
3 Layer Glass Fiber/ Aramid/ Glass Fiber
Die-Cast Aluminum
w/ FlexFit2TM
Dual NomexTM Progressive w/ Integrated
Leadwires
Dual Gap Multi-Pole
Neodymium Push/ Pull
Leadwires
Triple Stack Ferrite Magnet
w/ IDHSTM
*T3S1-19 MODEL SHOWN
41
500-600
WATTS
SINGLE 1Ω
SINGLE 2Ω
RMS POWER
RANGE
SLIM
DUAL 2Ω
DUAL 4Ω
Kevlar fiber cone / Hard Anodized
Aluminum Dust Cap
Eliminates cone distortion.
600-1000
RMS POWER
RANGE
WATTS
Reduces piston flex.
Tall Profile, Santoprene™
w/ VAST™
Kevlar Fiber Paper/ Hard
Anodized Aluminum
Dual Mirror Imaged w/ Stitched Lead
Wire and Cooling Vents
Three-Layer Carbon Fiber/ Rohacell/
Glass Fiber Cone
3” 4-Layer High Temp.Aluminum w/
NomexTM collar
Extremely rigid yet lightweight cone
design eliminates flex under high
power applications.
Die-Cast Aluminum
w/ FlexFitTM
Double Stack Ferrite
Magnet w/ IDHSTM
Double Stacked Magnet with IDHSTM
*T1D412 MODEL SHOWN
IDHSTM increases thermal capacity
and heat dissipation.
This increases power handling
and performance.
DUAL 2Ω
DUAL 4Ω
Tall profile SantopreneTM
w/ VASTTM surround
Allows for linear travel.
High excursion.
True NomexTM spiders maximize
excursion capabilities while maintaining
full linear cone control.
Innovative suspension design eliminates
any mechanical bottoming of the voice
coil assembly.
550-800
WATTS
Dual Nomex™ Progressive Spiders
with Integrated Lead Wires
High Temp High Energy Neodymium
Motor Structure
RMS POWER
RANGE
w/ VAST™
High quality, high energy neodymium
magnet structure provides motor force
equivalent to a full size T1 woofer.
Kevlar Fiber Paper/ Hard
Anodized Aluminum
3” 4-Layer High Temp.Aluminum w/
NomexTM collar
w/ VAST™
3” Dual Wound W/ Interior & Exterior
Windings
Die-Cast Aluminum
w/ FlexFitTM
3 Layer Carbon Fiber/ Rohacell/ Glass Fiber
Die-Cast Aluminum
w/ FlexFit2TM
Double Stack Ferrite Magnet
Leadwires
High Energy Neodymium
43
Die-cast aluminum
frame with FlexFitTM
For reduced voice coil former
temperature and increase
power handling.
FlexFit for better mounting.
*T0D412 MODEL SHOWN
Hard Anodized Aluminum
Cone & Dust Cap
DUAL 2Ω
DUAL 4Ω
Premium sound quality.
RMS POWER
RANGE
200-250
WATTS
WATTS
500-600
SINGLE 2Ω
SINGLE 4Ω
Half Roll, Nitrile
Butadiene surround
w/ VAST™
RMS POWER
RANGE
Half-Roll, Nitrile Butadiene
Rubber
Kevlar Fiber Paper
Single w/ Stitched Lead Wire
and Cooling Vents
2.50” 4-Layer High Temp. Aluminum w/
NomexTM collar
2” 4-Layer High Temp. Aluminum w/
NomexTM collar
StampCastTM w/ FlexFitTM
Spider Cooling Vents
*P3D4-12 MODEL SHOWN
DUAL 2Ω
DUAL 4Ω
Tall profile SantopreneTM
w/ VASTTM surround
Increased cone area.
WATTS
250-400
RMS POWER
RANGE
High excursion.
Single Stack Ferrite Magnet
Flex Fit for better mounting.
*P1S4-12 MODEL SHOWN
DUAL 2Ω
DUAL 4Ω
Kevlar Reinforced semipressed Paper Cone
Lightweight for efficiency.
Very rigid to eliminate
cone distortion.
M-Roll Santoprene
surround w/ VASTTM
TM
Increased cone area.
Lower profile.
Cone & Dust Cap
SHALLOW
Premium sound quality.
150-400
RMS POWER
RANGE
w/ VAST™
M-Roll, Santoprene™
w/ VAST™
Kevlar Fiber Paper
Dual Laminated w/ Embedded Lead Wire
and Cooling Vents
NomexTM collar
NomexTM collar
Single Ferrite Magnet
*P2D4-12 MODEL SHOWN
45
Rigid basket.
Proprietary vents work in
conjunction with the vented
pole piece and vented back
plate for maximum cooling &
increased power handling.
WATTS
StampCastTM frame with
Flex FitTM
*P3SD4-12 MODEL SHOWN
Assists in linear
cone travel.
WATTS
250
Half-Roll, Sealed
Polyether – Ester
Foam Surround
RMS
POWER
RANGE
Improved excursion
capabilities.
DUAL 2Ω
DUAL 4Ω
Polypropylene Cone
Rigid cone reduces
piston flex.
Reduces cone distortion.
Monolithic Injection Molded
Polypropylene Cone
Rigid cone design.
Reduces cone distortion.
SHALLOW
200-250
WATTS
DUAL 2Ω
DUAL 4Ω
Half-Roll, Sealed
Polyether-ester Foam
Half-Roll, Sealed Polyether-ester
Foam
Polypropylene
Injection Molded Polypropylene
and Cooling Vents
and Cooling Vents
2” 4-Layer High Temp. Aluminum
w/ NomexTM collar
w/ NomexTM collar
Stamped Steel
Stamped Steel Frame
Stamped Steel
Design reduces frame flex.
Improves performance.
*R2D4-12 MODEL SHOWN
WATTS
200
*R2SD4-12 MODEL SHOWN
SINGLE 4Ω
RMS
POWER
RANGE
Half-Roll, Sealed
Polyether-ester Foam
Polypropylene
and Cooling Vents
w/ NomexTM collar
Stamped Steel
*R1S4-12 MODEL SHOWN
47
RMS POWER
RANGE
High durability
compressed
foam surround
Fiber Reinforced Painted
Paper-Pulp Cone
w/ Aluminum Dustcap
Tear & fatigue resistant.
Rigid & lightweight.
Designed for long life use.
Improves thermal performance
for higher power handling.
Mounting
Diameter
Mounting
Depth
Speaker
Sealed
Enclosure
(cu. ft.)
Ported
Enclosure
Surround
Material
Dustcap
Material
Cone
Material
Voice Coil
3000
6000
17.54"
15.62
0.34
N/A
8 cu. ft. Port: (1) 23"h x 3"w x 30"d
Surround with VAST™
Aluminum Dustcap
Three Layer Glass Fiber/
Aramid Honeycomb/
Glass Fiber
Dual Separated Single Layer
Edge Wound Aluminum 5"
Voice Coils
T2S1-13/ T2S2-13
13"
Single 1Ω or 2Ω
34
87 dB
2000
4000
12.28"
9.7"
0.34
1.85
4.0 cu. ft. Port: (1) 14"h x 3"w x 20.5"d
T2S1-16/ T2S2-16
16"
Single 1Ω or 2Ω
34
90 dB
2500
5000
15.04"
10.47"
0.49
2.4
5.5 cu. ft. Port: (1) 18"h x 3"w x 23"d
T1D210/T1D410
10”
Dual 2 Ω or 4 Ω
16.4
83 dB
600
1200
9.13"
6.5"
0.203
0.75
1.50 cu ft. Port: (1) 4”x11”
T1D212/T1D412
12”
Dual 2 Ω or 4 Ω
16.4
86 dB
800
1600
11.25"
6.9"
0.308
1.25
1.75 cu ft. Port: (1) 4”x9”
T1D215/T1D415
15”
Dual 2 Ω or 4 Ω
16.4
88 dB
1000
2000
13.94"
8.4"
0.547
2.25
2.66 cu ft. Port: (1) 4”x10”
T1S1-10T1S2-10
SLIM
10”
Single 1 Ω or 2 Ω
15
85 dB
600
1200
11.22"
3.0"
0.05
0.8
1.5 cu. ft. Port: (1) 4"x13
T1S1-12/T1S2-12
SLIM
12”
Single 1 Ω or 2 Ω
15
83 dB
500
1000
9.13"
3.0"
0.03
1.5
2 cu. ft. Port: (1) 4"x14.25"
T0D210/T0D410
10”
Dual 2 Ω or 4 Ω
14.8
81 dB
550
1100
9.13"
6.5"
0.203
0.75
1.50 cu ft. Port: (1) 4”x11”
T0D212/T0D412
12”
Dual 2 Ω or 4 Ω
14.8
84 dB
700
1400
11.25"
6.9"
0.308
1.25
1.75 cu ft. Port: (1) 4”x9”
T0D215/T0D415
15”
Dual 2 Ω or 4 Ω
14.8
87 dB
800
1600
13.94"
8.4"
0.547
2.25
2.66 cu ft. Port: (1) 4”x10”
P3D2-10/P3D4-10
10”
Dual 2 Ω or 4 Ω
13.9
82 dB
500
1000
9.13"
6.2"
0.127
0.59
1.40 cu ft. Port: (1) 4”x14”
P3D2-12/P3D4-12
12”
Dual 2 Ω or 4 Ω
13.9
85 dB
600
1200
11.25"
6.7"
0.194
1.02
1.79 cu ft. Port: (1) 4”x10”
P3D2-15/P3D4-15
15”
Dual 2 Ω or 4 Ω
13.9
86 dB
600
1200
13.94"
7.6"
0.247
1.58
2.66 cu ft. Port: (1) 4”x10”
P3SD2-8/P3SD4-8
SHALLOW
8”
Dual 2 Ω or 4 Ω
8.4
82 dB
150
300
7.13”
2.7”
0.040
0.25
0.75 cu ft. Port: (1) 3”x9”
P3SD2-10/P3SD4-10
SHALLOW
10”
Dual 2 Ω or 4 Ω
8.4
83 dB
300
600
9.13”
3.5”
0.074
0.50
1.00 cu ft. Port: (1) 4”x12”
P3SD2-12/P3SD4-12
SHALLOW
12”
Dual 2 Ω or 4 Ω
8.4
85 dB
400
800
11.25”
3.7”
0.086
1.00
1.25 cu ft. Port: (1) 4”x12”
P2D2-8/P2D4-8
8”
Dual 2 Ω or 4 Ω
7.8
83 dB
250
500
7.13"
4.8"
0.071
0.23
0.65 cu ft. Port: (1) 2”x8”
P2D2-10/P2D4-10
10”
Dual 2 Ω or 4 Ω
11
84 dB
300
600
9.13"
5.9"
0.088
0.59
1.40 cu ft. Port: (1) 4”x14”
P2D2-12/P2D4-12
12”
Dual 2 Ω or 4 Ω
13.3
86 dB
400
800
11.25"
6.4"
0.170
1.02
1.79 cu ft. Port: (1) 4”x10”
P2D2-15/P2D4-15
15”
Dual 2 Ω or 4 Ω
13.3
86 dB
400
800
13.94"
7.3"
0.219
1.58
2.66 cu ft. Port: (1) 4”x10”
8”
Single 2 Ω or 4 Ω
7.6
83.5 dB
200
400
7.13"
4.4"
0.053
0.23
0.65 cu ft. Port: (1) 2”x6”
P1S2-10/P1S4-10
10”
Single 2 Ω or 4 Ω
9.4
85 dB
250
500
9.13"
5.3"
0.085
0.59
1.40 cu ft. Port: (1) 3”x8”
P1S2-12/P1S4-12
12”
Single 2 Ω or 4 Ω
9.4
86 dB
250
500
11.25"
6.0"
0.113
1.02
1.79 cu ft. Port: (1) 3”x6”
P1S2-15/P1S4-15
15”
Single 2 Ω or 4 Ω
9.4
87.5 dB
250
500
13.94"
7.0"
0.191
1.58
2.66 cu ft. Port: (1) 4”x8”
R2D2-10/R2D4-10
10”
Dual 2 Ω or 4 Ω
6.5
89 dB
250
500
9.13"
4.3"
0.101
0.59
1.40 cu ft. Port: (1) 4”x13”
R2D2-12/R2D4-12
12”
Dual 2 Ω or 4 Ω
6.5
87 dB
250
500
11.25"
5.1"
0.150
1.02
1.79 cu ft. Port: (1) 4”x9.3”
R2SD2-10/R2SD4-10
SHALLOW
10”
Dual 2 Ω or 4 Ω
8
83 dB
200
400
9.13"
3.4"
0.037
0.70
1.40 cu ft. Port: (1) 4”x13.7”
R2SD2-12/R2SD4-12
SHALLOW
12”
Dual 2 Ω or 4 Ω
10
85 dB
250
500
11.25"
3.6"
0.039
0.90
1.79 cu ft. Port: (1) 4”x11.8”
R1S4-10
10”
Single 4 Ω
7.0
87 dB
200
400
9.13"
4.4"
0.06
0.75
1.4 cu ft. Port: (1) 3”x8”
R1S4-12
12”
Single 4 Ω
7.0
90 dB
200
400
11.25"
4.94"
0.10
1.02
1.79 cu ft. Port: (1) 3”x6”
P1S2-8/P1S4-8
Aluminum Dia Cast
Frame with Integrated
Heat Sink Fins and
Venting
Dual Gap Multi‐Pole Neodymium
Push/Pull Motor Structure
Custom Push
Spring Insulated 4
AWG Terminals
Integrated Die Cast
Aluminum Trim Ring
Triple Stack Segmented Ferrite
Motor Structure
Custom Push
Spring Insulated 8
AWG Terminals
Detachable Die Cast
Aluminum Trim Ring
Single Layer Edge Wound
Aluminum 4" Voice Coil
Tall profile, Santoprene™ with VAST™
Surround with VAST™
Aluminum Dustcap
Trim Ring
Peak Power
Handling
(watts)
90 dB
Terminal
Connectors
RMS Power
Handling
(watts)
34
Motor
Structure
Sensitivity
Single 1Ω or 2Ω
Frame
Structure
Xmax (mm)
19"
Spider
Nominal
Impedance
T3S1-19/ T3S2-19
(cu. ft.)
Speaker
Size
Displacement
[ SUBWOOFER SPECIFICATIONS [
Kevlar® fiber reinforced
semi-pressed paper
3" 4-layer ultra-high temp.
aluminum voice coil with
spun-laced Nomex™ insulating
reinforcement collar
Dual mirror imaged, progressive
roll tear & fatigue resistant
poly-cotton spider with multipoint
stitched lead wire technique and
proprietary spider cooling vents
Die-cast aluminum
with FlexFit™
Double stack ferrite magnet with
extended vented pole and bumped
vented backplate with IDHS™
Dual 10 Ga. proprietary SWIFT™
terminal
Reversible die-cast aluminum w/ Soft Touch
paint and integrated/
removable grille
Three Layer Carbon
Fiber/Rohacell/
Glass Fiber
Dual Wound Single 3" Voice
Coil with Interior and Exterior
Windings
Aluminum Dia Cast
Frame with Integrated
Heat Sink Fins
High Temp High Energy Neodymium Motor Structure
Custom Push
Spring Insulated
10 AWG Terminals
Detachable Die Cast
Aluminum Trim Ring
semi-pressed paper
3” 4-layer ultra-high temp.
Die-cast aluminum
with FlexFit™
vented backplate with IDHS™
Dual 10 Ga. proprietary SWIFT™
terminal
paint and integrated/
removable grille
Hard anodized
aluminium
Hard anodized
aluminum
Hard anodized
aluminum
2.5" 4-layer ultra-high temp.
StampCast™ with
FlexFit™
vented backplate
8 Ga. custom
insulated/isolated
compression style
Reversible die-cast
aluminum w/ Soft
Touch paint and optional
integrated grille
M-roll, Santoprene™
with VAST™
Hard anodized
aluminum
Hard anodized
aluminum
2.5” 4-layer ultra-high temp.
Dual laminated, progressive roll
tear & fatigue resistant
poly-cotton spiders with embedded lead wire technique and
StampCast™ with
FlexFit™
Ferrite magnet structure with
vented backplate
8 Ga. custom
insulated/isolated
compression style
Reversible die-cast
aluminum w/ Soft
Touch paint and
optional grille
Kevlar fiber reinforced
semi-pressed paper
semi-pressed paper
2.25" 4-layer high temp.
StampCast™ with
FlexFit™
Double stack ferrite magnet structure with extended vented pole and
bumped backplate
8 Ga. custom
insulated/isolated
compression style
paint and optional
integrated grille
Half-roll, high density
Nitrile Butadiene Rubber
Kevlar fiber reinforced
semi-pressed paper
semi-pressed paper
2" 4-layer high temp. aluminum
voice coil with spun-laced
Nomex™ insulating reinforcement collar
Tear & fatigue resistant polycotton spider with multipoint
StampCast™ with
FlexFit™
backplate
8 Ga. custom
insulated/isolated
compression style
Reversible Acrylonitrile
Butadiene Styrene with
optional integrated
grille
Half-roll, Sealed
Polyether-ester foam
Polypropylene
Polypropylene
2" 4-layer high temp. aluminum
voice coil with spun-laced
Nomex™ insulating reinforcement collar
Tear & fatigue resistant polycotton spider with multipoint
spider cooling vents
Stamped steel
backplate
Standard 10 Ga.
Integrated Polyvinyl
Chloride trim ring
Injection molded
Polypropylene
Injection molded
Polypropylene
Laser-etched
aluminum
Fiber re-inforced
paper pulp
2" 4-layer high temp. copper
voice coil with aluminum
former
Integrated ABS
[ SUBWOOFER ENCLOSURE SPECIFICATIONS [
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P3-2X10
(2) P3D4-10
1Ω
1000 Watts
2000 Watts
13.125” x 31.125” x 15.125”
P3-1X10
(1) P3D2-10
1Ω
500 Watts
1000 Watts
P3-2X12
(2) P3D4-12
1Ω
1200 Watts
2400 Watts
P3-1X12
(1) P3D2-12
1Ω
600 Watts
1200 Watts
P2-2X10
(2) P2D4-10
1Ω
600 Watts
P2-1X10
(1) P2D2-10
1Ω
P2-2X12
(2) P2D4-12
1Ω
P2-1X12
49
(1) P2D2-12
1Ω
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P1-2X10
(2) P1S4-10
2Ω
500 Watts
1000 Watts
13.125” x 31.125” x 15.125”
13.125” x 17.0” x 15.125”
P1-1X10
(1) P1S4-10
4Ω
250 Watts
500 Watts
13.125” x 17.0” x 15.125”
15.125” x 33.875” x 15.75”
P1-2X12
(2) P1S4-12
2Ω
500 Watts
1000 Watts
15.125” x 33.875” x 15.75”
15.125” x 19.125” x 15.75”
P1-1X12
(1) P1S4-12
4Ω
250 Watts
500 Watts
15.125” x 19.125” x 15.75”
1200 Watts
13.125” x 31.125” x 15.125”
R1-1X10
(1) R1S4-10
4Ω
200 Watts
400 Watts
12.0” x 15.825” x 12.25”
300 Watts
600 Watts
13.125” x 17.0” x 15.125”
R1-2X10
(2) R1S4-10
2Ω
400 Watts
800 Watts
12.0” x 30.0” x 12.25”
800 Watts
1600 Watts
15.125” x 33.875” x 15.75”
R1-1X12
(1) R1S4-12
4Ω
200 Watts
400 Watts
14.0” x 17.5” x 12.25”
15.125” x 19.125” x 15.75”
R1-2X12
(2) R1S4-12
2Ω
400 Watts
800 Watts
14.0” x 33.75” x 12.25”
400 Watts
800 Watts
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P3S-1X10
(1) P3SD2-10
1Ω
300 Watts
600 Watts
13.5" x 19.0" x 5.3"/3.3"
P3S-1X12
(1) P3SD2-12
1Ω
400 Watts
800 Watts
13.5" x 27.4" x 5.3"/3.3"
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
R2S-1X10
(1) R2SD4-10
2Ω
200 Watts
400 Watts
13.5” x 19.0” x 5.3”/3.3”
R2S-1X12
(1) R2SD4-12
2Ω
250 Watts
500 Watts
13.5” x 27.4” x 5.3”/3.3”
ROCKFORDFOSGATE.COM
wire woofers to your amplifier or our Woofer Box Advisor
for optimized enclosure bass performance.
150
1
WATTS
UP TO
RMS POWER
HANDLING
YEAR
LIMITED
WARRANTY
40 - 30
Hz
kHz
FREQUENCY
RESPONSE
WATTS
75
1
UP TO
RMS POWER
HANDLING
YEAR
LIMITED
WARRANTY
43 - 22
Hz
kHz
FREQUENCY
RESPONSE
SPEAKERS
SPEAKERS
YEAR
WATTS
65
1
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
47 - 20
Hz
kHz
FREQUENCY
RESPONSE
OUTPUT YOU EXPECT, SOUND QUALITY YOU NEVER IMAGINED
If you’re truly serious about high quality sound, our
Power family of speakers are what you need. Built on
years of knowledge in acoustic engineering, Rockford
Fosgate delivers a family of speakers that is industry
leading. From our class leading T5 series of audiophile
components down to our T1 coaxial speakers, the
Power family focuses on providing you the best
musical experience you’ve ever had.
MODELS SHOWN | T5652-S
53
MODELS SHOWN | T1693, T1650-S, T1650, T142
Plus, by incorporating design features such as VAST
technology for up to a 25% increase in cone area,
which means not only more output for you but a better
overall frequency response to our Flex Fit baskets for
improved mounting fitment and shorter installation
times. The Power family of speakers takes top honors
among even the most discerning music aficionados.
WHEN LOUD JUST ISN’T LOUD ENOUGH
If you’re someone that really wants to pump up the level
of your music to the extreme, then the Punch Pro series of
speakers are for you. Rockford Engineers have found that
there is a growing community of people who design their
audio systems not so much towards sound quality, but more
towards sound “QUANTITY”. It’s with this group in mind that
led to the development of the Punch Pro speaker family.
Designed with high efficiency and high power handling,
these speakers are meant to take the power and play loud.
FOR THOSE WHO LIKE IT RAW AND LOUD
Are you someone who really likes to “feel” your music? If so
then check out the Punch family of speakers. When you’re
ready to upgrade and you really want something that can
deliver crisp, clear vocals and have the low end response
to back them up, then you’ve found them. Using the same
VAST technology found on our Power line of speakers, the
Punch line is able to produce deeper bass and more volume
output than the competition.
With a variety of coaxial and component model speakers
ranging in size from 3.5 inches to 6x9 inches, the Punch series
is ideal for the customer wanting to roll the windows down,
crank the music up and cruise the streets with their buddies.
MODELS SHOWN | PPS4-10, PPS4-6, PP4-NT, PP4-T
HIGH OUTPUT
EXTREME LEVELS OF MID TO HIGH RANGE WILL BE EXPERIENCED
SCENARIOS TO CONSIDER WHEN USING
THIS PRODUCT:
A superior sensitivity yields low power (Watts)
requirements.
Their unique structure gives opportunity to an equally
unique fitment.
MODELS SHOWN | P1694, P1650, P165-SE, P142
55
Available in a variety of tweeter and midrange sizes along
with passive crossovers to compliment, Rockford has
created a family of products that truly put the phrase “If it’s
too loud, then you’re too old” to the test. So, if you want
your audio system to not just be at the party, but “BE” the
party, then you need to check them out.
It is HIGHLY encouraged to incorporate a generous quantity
of this product in one application for a preferred outcome.
To all the Rockford Fosgate Fanatics we would
like to introduce the speakers to accompany your
two strapped T2500-1bdCP pushing (2) T2 16’s…
the PUNCH PRO speakers are guaranteed to
provide HIGH OUTPUT full range for extreme SQL
(Sound Quantity Level) systems.
AUTHENTIC SOUND AT A PRIME PRICE POINT
Are you tired of listening to your factory speakers rattling away inside your doors?
Do you want to turn up your factory radio and just get ”more” out of it than you have
now? Then you need to check out the Prime family of speakers. Our Prime full range
loudspeakers and components are a no-compromise design for that drop-in fit for your
factory speaker location.
Designed with an ultra-lightweight poly cone and dome tweeter, our Prime drivers are
efficient enough to hook up directly to your factory head-unit for instant improvement.
If you really want to improve the sound, connect them to an amplifier to increase the
speaker’s output and overall performance.
MODELS SHOWN | R`169X3, R165X3, R14X2, R165-S
57
DISCREET DUAL CLAMP
Rockford’s proprietary tweeter mounting design provides concentric clamping
pressure around the perimeter of the mounting hole, utilizing a single center screw.
This applies balanced pressure to both faces of the mounting surface. From there, the
tweeter simply snaps into place and is finished with a snap on trim ring.
Products Featuring: DDC
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope
has led us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal
and make it Rockford.
INDUCTIVE DAMPING HEAT SINK
Secures directly to the top of magnet structure to improve system efficiency by
reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to
reduce voice coil temperature.
Products Featuring: IDHS
VERTICAL ATTACH SURROUND TECHNIQUE
Rockford’s proprietary surround technique, VAST, provides up to a 25% increase in the
speakers effective radiating cone area without complicated installation issues. This design
alters the typical design and manufacturing technique by eliminating the large flat glue
surface area (the landing) which allows the surround to be shifted for increased cone area.
In turn, both nominal efficiency and maximum output capabilities are dramatically improved.
Products Featuring: VAST
RF LINK
Rockford’s proprietary RF Link is a bus-power component connection system enabling
integration and control of all RF Link equipped products. The use of this systems allows
for the expansion of auxiliary controls and managed system turn on.
Products Featuring: RFLINK
INTEGRATED CONCEALED CROSSOVER
The Integrated Concealed Crossover hides the crossover inside the basket, creating
a cleaner look and easier installation.
Products Featuring: ICC
FLEX FIT
The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of
single screw sized holes. This allows for a slight adjustment of the speaker when mounted.
Products Featuring: FLEX FIT
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry
standards. This means your speaker has the capacity to handle power under
continuous demand, not instantaneous power handling that over time can damage
voice coils.
FLEX FIT 2 AND
CAR MOUNTING
SPEAKER LOCATION
FELX FIT 2
VERIFIED WITH KLIPPEL
The slot mounted frame pattern allows for variable adjustments to the mounting
position, especially for Euro-Fit installations.
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker
engineering personnel must be trained and certified by Klippel prior to using the three
separate Klippel systems to design, develop and test.
Products Featuring: FLEX FIT 2
WATCH DETAILED VIDEOS ON OUR SPEAKER TECHNOLOGIES.
59
•
•
•
Klippel DA-2 (Designed)
Klippel PM-8 (Developed)
Klippel QC (Tested)
Products Verified with KLIPPEL
SPEAKER PERFORMANCE LINEUP
Accuracy Score - Is derived from calculating the magnitude
deviations from the speaker’s frequency response against a
reference flat magnitude response.
ACCURACY
SCORE
FREQ.
RESPONSE
RANGE
PEAK
POWER
Frequency Response Range - The frequency response
range or width tells you how high or low the speaker plays.
BASS
=
MID
HIGH
Peak Power - The maximum amount of amplifier power that
can be applied to a speaker prior to entering into an unsafe
operating scenario.
62
f r a m e wo r k
2WAY
6.5”
COMPONENTS
OF A SPEAKER
1”(25mm) Liquid Crystal Polymer Fiber
Ring Radiator Dome, Dual Neodymium
Magnets w/ IDHS™, Low Resonant
Chamber and DDC™
Modifications to the framework of a speaker significantly impact its sonic signature.
Combining various materials will strengthen, add volume and resonate the music to a
desired sound. By intertwining superior speaker designs with Rockford’s proprietary
acoustic technologies in our speaker lineup, we are sure to bring your music to life.
RFLink™ Equipped External Component
Crossover w/ 1% Mil-Spec Parts and I
elligent Protection w/ Integrated/Remote
Tuning Module
Butyl Rubber w/ VAST™
SURROUND
Tri-laminate Liquid Crystal Polymer
Fiber w/ Machined Copper
Phase Plug
CONE
• Designed and engineered to produce the highest level of sound quality for
the most discerning audiophile.
• Our custom passive/ active crossover allows you to fine tune the system to
suit your taste using the integrated remote control.
• The solid copper heat sink and phase plug draw heat away from the voice
coil improving sound quality and increasing power handling.
TWEETER
Die-Cast Aluminum
w/ FlexFitTM
Multi-Pole™ Dual Neodymium Magnet
w/ IDHS™
*T5652-S MODEL SHOWN
BASKET
CROSSOVEr
2WAY
6.5”
MAGNET
COMPONENTS
MATERIAL HIErARCHY
BESt
GOOD
63
Tweeter - Composed of the same parts
as an speaker, surround, cone, voice
coil, basket and magnet. Just on a
smaller scale.
Cone - A.K.A the diaphragm, this is the
voice of the speaker. Shape and material
dramatically change tonality.
Crossover - Works like a switch
board, directing the audio signal
through caps, filters and switches
to the appropriate speaker.
Basket - Also referred to as the frame
or chassis, this is the skeletal system of
the speaker. Here to keep everything in
their place.
Surround - Works in harmony with the
spider, attached to the cone to maintain
the centering of the voice coil in the
magnetic gap.
the force to push and pull cone assembly. Size, material, and design may
differ, depending on performance goals.
Ring Radiator Dome, Dual Neodymium
Magnets w/ IDHS™, Low Resonant
Chamber and DDC™
External Audiophile Grade ComponentCrossover w/ 5% (Tol) Parts
Tri-laminate Liquid Crystal
Polymer Fiber
• The T4 components are highly accurate in their frequency reproduction
by utilizing the same tweeter, basket and motor structure from the T5.
components combined with the cone and crossover from the T3 components.
• The multi-pole Neodymium motor structure maximizes excursion capability
and control under extreme output conditions.
• The Liquid Crystal polymer Fiber cone is lightweight and rigid which improves
sound quality and output without distorting cone flex.
Die-Cast Aluminum
w/ FlexFitTM
Multi-Pole™ Dual Neodymium Magnet
w/ IDHS™
2WAY
6.5”
2WAY
6.75”
6.5”
COMPONENTS 6.0”
5.25”
Tweeter Kit
COMPONENTS
Dome w/ Neodymium
Magnet and DDC™
1”(25mm) Treated Fabric Dome w/
Neodymium Motor and DDC™
External Audiophile Grade Component
Crossover w/ 5% (Tol) Parts
Woven Liquid Crystal
Polymer Fiber
Injection Molded Polypropylene-Carbon
Fiber Blend
Die-Cast Aluminum
w/ FlexFitTM
StampCastTM w/ FlexFitTM and
FlexFit2TM
Neodymium Magnet
w/ IDHS™
COMPONENTS
• Our LCP tweeter with silk surround provides clean, crisp high frequency
reproduction without worrying about distortion at higher volumes.
• Our components feature our discrete Dual Clamping system for the
tweeters which provides for a more secure installation than other
clamping designs.
• The crossover network features bi-amp capabilities if your system calls for
amplifying the tweeter separate from the midrange speaker.
• Our FlexFitTM and FlexFit 2TM mounting hole patterns improve the fitment of
our speakers as well as expand the number of vehicles the speakers will fit
in. (Also found on T1650 Coax).
• The 1” fabric dome tweeter provides natural sounding high frequencies
while the midrange delivers the lows with precision.
2WAY
6.5”
5.25”
Tweeter Kit
Blutyle Rubber w/ VAST™
Injection Molded Polypropylene-Carbon
Fiber Blend w/ Machined Aluminum
Phase Plug
Injection Molded Mineral Filled Polypropylene w/ Carbon Fiber Blend
2WAY
6x9”
6x8”
5x7”
4x6”
ICC™ Component Crossover w/ 5%
(Tol) Parts
65
2WAY
6.75”
6.5”
6.0”
5.25”
4.0”
1”(25mm) Aluminum Dome w/
Neodymium Motor
COAXIALS
1”(25mm) Aluminum Dome w/ Neodymium
Motor and DDC™
Neodymium Magnet
w/ IDHS™
FlexFit2TM
• Our injection molded, carbon fiber reinforced cone assembly reduces cone
flex while maintaining sound quality.
• Our midrange speakers utilize our VASTTM technology, which can provide
for up to 25% more cone area meaning better frequency response and
increased output.
• Our StampCastTM aluminum basket design provides a rigid framework and
eliminates frame flex under high power applications.
• Our offset cantilever mounted tweeter (select models) eliminates damaging
acoustic reflections between the midrange and the rear of the tweeter.
• A perfect choice to replace your factory speaker and attain high quality
sound output without needing extensive modification to the vehicle.
*T1650 MODEL SHOWN
3WAY
6x9”
COMPONENTS
TWEETER
1.0” 4Ω
8Ω
2WAY
6.75”
6.5”
6.0”
5.25”
Tweeter Kit
1”(25mm) Horn Design w/ Machined
Aluminum Phase Plug
1”(25mm) Plated Polyether Imide (PEI)
Dome w/ Neodymium Motor
and DDC™
Integrated High-Pass Crossover
ICC™ Component Crossover w/ 10%
(Tol) Parts
N/A
w/ VAST™
N/A
Injection Molded Mineral Filled Polypropylene
FlexFit2TM
Die-Cast Aluminum
• Punch components feature both FlexFitTM and FlexFit 2TM basket designs for
improved factory mounting compatibility (Also found on P1650 Coax).
• Most models feature an integrated concealed crossover system so there is
no additional crossover box to install.
• Our 1 inch horn loaded tweeter is designed for high SPL applications.
• The Neodymium motor structure and cast aluminum housing allows for a
compact design for tight spaces.
*PP4-NT MODEL SHOWN
*P1675-S MODEL SHOWN
COAXIALS
Neodymium Magnet
w/ IDHSTM
2WAY
6.5” 6x9”
6.0” 5x7”
5.25” 4x6”
4.0”
3.5”
TWEETER
1.5” 4Ω
8Ω
3WAY
6.75”
6x9”
6x8”
4WAY
6x9”
1.5”(38mm) Horn Design w/ Machined
Aluminum Phase Plug
1”(25mm) Plated Polyether Imide (PEI)
Dome w/ Neodymium Motor
and DDC™
N/A
ICC™ w/ 10% (Tol) Parts
N/A
Nitrile Butadiene Rubber w/ VAST™
Die-Cast Aluminum w/ FlexFitTM
Injection Molded Mineral Filled
Polyprpylene
FlexFit2TM
*P1650 MODEL SHOWN
67
• Punch coax speakers are ideal for the customer who likes to really “feel”
their music.
• A perfect “step-up’’ choice when looking to design an amplified speaker
system to replace your worn out factory speakers.
• With its oversized motor structure and high temperature voice coil our 1.5
inch Pro tweeter is designed for high SPL systems.
*PP4-T MODEL SHOWN
MIDRANGE
6.0” 4Ω
8.0” 8Ω
10.0”
COMPONENTS
N/A
1”(25mm) Mylar Balanced
Dome
N/A
W-Style, Treated Cloth
SPE Foam
Fiber Reinforced Paper w/ Machined
Aluminum Phase Plug
Vacuum Formed Polypropylene
Stamped Steel
• High efficiency driver designed for extreme output capabilities.
• The fiber reinforced cone with machined aluminum phase plug creates a
highly sensitive speaker that can handle plenty of power.
*PPS4-6 MODEL SHOWN
• A dedicated 2-way component system utilizing a Mica injected
polypropylene cone for extended frequency response and accommodates
direct OEM installation.
• The Mylar balanced dome tweeter recreates crystal clear highs and comes
with an in-line crossover for simplified installation.
*R165-S MODEL SHOWN
CROSSOVER
4Ω
8Ω
COAXIALS
2WAY
6.75”
5.25”
4.0”
6x9”
6x8”
3WAY
6.5”
6x9”
N/A
1/2”(13mm) Embedded Phase Coherent
Mylar Balanced Dome
N/A
N/A
Vacuum Formed Polypropylene
N/A
Stamped Steel
N/A
*PP4-X MODEL SHOWN
69
2WAY
6.75”
6.5”
6.0”
5.25”
Tweeter Kit
• Punch Pro crossover is designed to work with our Pro tweeters and midrange speakers.
• Available in a 4 or 8 ohm model.
• Allows connection of multiple midrange speakers to a single crossover.
• The basket design allows for that perfect factory replacement fit.
• Their high efficiency design works great with radio or amplifier power.
*R1675X2 MODEL SHOWN
71
2.48”
T4652-S
6.5”
1”
150 watts
300 watts
40Hz-30kHz
89dB
92dB
2.79”
T3652-S
6.5”
1”
125 watts
250 watts
48Hz-24kHz
87dB
90dB
2.48”
T252-S
5.25”
1”
75 watts
150 watts
65Hz-22kHz
87dB
90dB
1.97”
T2652-S
6.5”
1”
100 watts
200 watts
50Hz-22kHz
88dB
91dB
2.48”
T2T-S
N/A
1”
100 watts
200 watts
3kHz-22kHz
90dB
93dB
*0.91”
T152-S
5.25”
1”
75 watts
150 watts
65Hz-22kHz
87dB
90dB
1.99”
T16-S
6.0”
1”
80 watts
160 watts
60Hz-22kHz
86dB
89dB
1.93”
T1650-S
6.5"
1"
80 watts
160 watts
47Hz - 20kHz
88 dB
91 dB
2.52"
T1675-S
6.75”
1”
100 watts
200 watts
55Hz-22kHz
89dB
92dB
2.51”
T1T-S
N/A
1”
100 watts
200 watts
3kHz-22kHz
90dB
93dB
*0.91”
T142
4”
0.75”
40 watts
80 watts
85Hz-22kHz
86dB
89dB
1.79”
T152
5.25”
1”
60 watts
120 watts
65Hz-22kHz
86.5dB
89.5dB
1.99”
T16
6.0”
1”
70 watts
140 watts
65Hz-22kHz
88dB
91dB
1.93”
T1650
6.5"
1"
75 watts
150 watts
44Hz - 20kHz
88 dB
91 dB
2.52"
T1675
6.75”
1”
75 watts
150 watts
50Hz-22kHz
89dB
92dB
2.51”
T1462
4”x6”
0.75”
45 watts
90 watts
75Hz-22kHz
85.5dB
88.5dB
2.00”
T1572
5”x7”
1”
70 watts
140 watts
60Hz-22kHz
87dB
90dB
2.35”
T1682
6”x8”
1”
80 watts
160 watts
55Hz-22kHz
88dB
91dB
2.60”
T1692
6”x9”
1”
100 watts
200 watts
50Hz-22kHz
90dB
93dB
3.39”
T1693
6”x9”
1”
100 watts
200 watts
50Hz-22kHz
91dB
94dB
3.39”
P152-S
5.25”
1”
50 watts
100 watts
70Hz-22kHz
87dB
90dB
1.91”
P16-S
6.0”
1”
60 watts
120 watts
60Hz-22kHz
87.2dB
90.2dB
1.93”
P165-SE
6.5"
1"
60 watts
120 watts
43Hz - 20kHz
88 dB
91 dB
2.24"
P165-SI
6.5"
1"
60 watts
120 watts
44Hz - 20kHz
88 dB
91 dB
2.24"
P1675-S
6.75”
1”
60 watts
120 watts
55Hz-22kHz
89dB
92dB
2.24”
P1T-S
N/A
1”
60 watts
120 watts
3.5kHz-22kHz
90dB
93dB
*0.91”
P132
3.5”
0.5”
20 watts
40 watts
120Hz-22kHz
85dB
88dB
1.46”
P142
4”
0.75”
30 watts
60 watts
100Hz-22kHz
86.5dB
89.5dB
1.75”
P152
5.25”
0.75”
40 watts
80 watts
70Hz-22kHz
87dB
90dB
1.91”
P16
6.0”
0.75”
55 watts
110 watts
65Hz-22kHz
88dB
91dB
1.93”
P1650
6.5"
0.75"
55 watts
110 watts
45Hz - 20kHz
88 dB
91 dB
2.24"
P1675
6.75”
0.75”
60 watts
120 watts
60Hz-24kHz
89dB
92dB
2.24”
P1462
4”x6”
0.75”
35 watts
70 watts
90Hz-22kHz
87.5dB
90.5dB
1.89”
P1572
5”x7”
0.75”
60 watts
120 watts
75Hz-22kHz
89dB
92dB
2.30”
P1683
6”x8”
0.75”
65 watts
130 watts
65Hz-24kHz
90dB
93dB
2.32”
P1692
6”x9”
0.75”
75 watts
150 watts
60Hz-22kHz
91dB
94dB
3.07”
Butyl rubber
with VAST™
Tri-laminate Liquid
Crystal Polymer Fiber
w/ machined copper
phase plug
Nomex™ w/ balanced
stitched woven
embedded fiber/flat
lead wires
Die-cast aluminum with
FlexFit™
Multi-pole™ dual neodymium
magnet w/ IDHS™
1"(25mm) Liquid Crystal Polymer Fiber
ring radiator dome, dual neodymium
magnets w/ IDHS™, low resonant chamber
and DDC™
Single chassis stereo w/ audiophile 1% mil-spec components and dual micro-controller for intelligent protection w/
integrated/remote tuning module and RFLink™ equipped
3-way connection terminal
Cat 5 remote extension cable,
grilles and mounting hardware
Tri-laminate Liquid Crystal Polymer Fiber™
stitched woven
embedded fiber/flat
lead wires
FlexFit™
Multi-pole™ dual neodymium
magnet w/ IDHS™
ring radiator dome, dual neodymium
magnets w/ IDHS™, low resonant chamber
and DDC™
External audiophile grade component crossover w/ 5%
(Tol) parts
Grilles and mounting hardware
Woven Liquid Crystal
Polymer Fiber™
stitched woven
embedded fiber/flat
lead wires
FlexFit™
Neodymium magnet w/
IDHS™
1"(25mm) Liquid Crystal Polymer Fiber™
dome w/ neodymium magnet and DDC™
(Tol) parts
Injection molded
Polypropylene-carbon
fiber blend w/ machined
aluminum phase plug
Fatigue resistant polycotton linear spider w/
woven fiber reinforced
lead wire
StampCast™ with Flex-fit™
Ferrite magnet structure
1”(25mm) aluminum dome w/ neodymium
motor and DDC™
(Tol) parts
Unified tab
Multi-OEM™ adaptor plates,
18 Ga. Pigtail
Flush w/ DDC™, surface and
angle mounting hardware
(Tol) parts
Unified tab
(Tol) parts
18 Ga. Pigtail
Aluminum dome w/
integral suspension &
tuned chamber
Injection molded
fiber blend
Neodymium
lead wire
Treated fabric dome w/
integral suspension &
tuned chamber
1”(25mm) treated fabric dome w/
neodymium motor and DDC™
Neodymium
Accessories
91.5dB
Terminal Connectors
Mounting
Depth
88.5dB
Crossover
Sensitivity
(2.83V/1M)
45Hz-40kHz
Tweeter
Sensitivity
(1W/1M)
300 watts
Motor Structure
Frequency
Response
150 watts
Frame
Structure
Peak Power
Handling
(watts)
1”
Spider
RMS Power
Handling
(watts)
6.5”
Cone
Material
Tweeter Size
T5652-S
Surround
Material
Speaker Size
[ SPEAKER SPECIFICATIONS [
Butyl rubber
with VAST™
Injection molded
fiber blend
lead wire
1”(25mm) aluminum dome w/ neodymium
motor and DDC™
ICC™ component crossover with 5% (Tol) parts
Unified tab
Nitrile Butadiene
Rubber with
VAST™
Injection molded mineral
filled Polypropylene
lead wire
1”(25mm) plated Polyether Imide (PEI)
dome w/ neodymium motor and DDC™
ICC™ component crossover with 10% (Tol) parts
Unified tab
External component crossover w/ 10% (Tol) parts
18 Ga. Pigtail
ICC™ with 10% (Tol) parts
Unified tab
Plated Polyether Imide
(PEI) dome
Nitrile Butadiene
Rubber with
VAST™
Neodymium
lead wire
3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium
motor
3.07”
PPS4-6
6.5”
N/A
100 watts
200 watts
85Hz-5kHz
92.5dB
95.5dB
2.24”
PPS8-6
6.5”
N/A
100 watts
200 watts
87Hz-5kHz
91.5dB
94.5dB
2.24”
PPS4-8
8.0”
N/A
125 watts
250 watts
80Hz-5kHz
94.5dB
97.5dB
2.91”
PPS8-8
8.0”
N/A
125 watts
250 watts
82Hz-5kHz
93dB
96dB
2.91”
PPS4-10
10.0”
N/A
350 watts
700watts
40Hz-3kHz
95dB
98dB
4.17”
PPS8-10
10.0”
N/A
350 watts
700watts
40Hz-3kHz
95dB
98dB
4.17”
PP4-NT
N/A
1"
50 watts
100 watts
4kHz 20kHz
107 dB
110 dB
2.57"
PP8-NT
N/A
1"
50 watts
100 watts
4kHz 20kHz
107 dB
110 dB
2.57"
PP4-T
N/A
1.5”
50 watts
100 watts
3kHz-20kHz
103dB
106dB
2.59”
PP8-T
N/A
1.5”
50 watts
100 watts
3kHz-20kHz
103dB
106dB
2.59”
R152-S
5.25”
1”
40 watts
80 watts
58Hz-20kHz
85dB
88dB
1.91”
R16-S
6.0”
1”
40 watts
80 watts
60Hz-20kHz
89dB
92dB
1.97”
R165-S
6.5”
1”
40 watts
80 watts
60Hz-20kHz
89dB
92dB
1.97”
R1675-S
6.75”
1”
40 watts
80 watts
55Hz-20kHz
89dB
92dB
2.00”
R1T-S
N/A
1”
40 watts
80 watts
2.5kHz-22kHz
72.5dB
75.5dB
*0.76”
R14X2
4”
0.5”
30 watts
60 watts
100Hz-20kHz
85dB
88dB
1.72”
R1525X2
5.25”
0.5”
40 watts
80 watts
62Hz-20kHz
88dB
91dB
1.93”
R165X3
6.5”
0.5”
45 watts
90 watts
52Hz-20kHz
91dB
94dB
2.15”
R1675X2
6.75”
0.5”
45 watts
90 watts
52Hz-20kHz
91dB
94dB
2.19”
R168X2
6”x8”
0.5”
55 watts
110 watts
51Hz-20kHz
87dB
91dB
2.54”
R169X2
6”x9”
0.5”
65 watts
130 watts
48Hz-20kHz
90dB
93dB
2.85”
R169X3
6”x9”
0.5”
65 watts
130 watts
47Hz-20kHz
90dB
93dB
2.85”
Accessories
94dB
Terminal
Connectors
Mounting
Depth
91dB
Crossover
Sensitivity
(2.83V/1M)
60Hz-24kHz
with VAST™
lead wire
3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium
motor
Unified tab
W-Style,
Treated Cloth
Fiber reinforced paper
w/ machined aluminum
phase plug
Fatigue resistant
polycotton linear spider
w/ woven lead wire
N/A
12 Ga. compression style
N/A
N/A
N/A
FlexFit™
Neodymium magnet
structure
1.0” (25mm) horn design
12 Ga. compression style
Mounting hardware
1.5”(38mm) horn design
1”(25mm) mylar balanced dome
Integrated high-pass crossover
Standard spade connector
18 Ga. Pigtail
Flush, surface and angle mounting hardware
Standard spade connector
SPE Foam
Vacuum formed PP
Fatigue resistant spider
Stamped steel
Tweeter
Sensitivity
(1W/1M)
150 watts
Motor
Structure
Frequency
Response
75 watts
Frame
Structure
Peak Power
Handling
(watts)
0.75”
Spider
RMS Power
Handling
(watts)
6”x9”
Cone
Material
Tweeter Size
P1694
Surround
Material
Speaker Size
Mylar balanced dome
Vacuum formed Polypropylene
Fatigue resistant spider
Stamped steel
1/2”(13mm) Embedded Phase Coherent
mylar balanced dome
Integrated high-pass crossover
1/2”(13mm) pole mounted mylar
balanced dome
ROCKFORDFOSGATE.COM
73
DIGITAL PROCESSORS
SIGNAL CONVERTERS
POWERED LOADED
DIRECT FIT SPEAKERS
ACCESSORIES
VEHICLE INTEGRATION
DIGITAL PROCESSORS / LINE DRIVER
PROPRIETARY 3SIXTY TECHNOLOGY
INTERACTIVE SIGNAL PROCESSOR
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology,
engineering and innovation that has taken over three decades to hone. Our constant desire to push the
performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies
that put a spin on the normal and make it Rockford.
®
3SIXTY.3
BLUETOOTH
The 3sixty.3 interactive signal processor is the
perfect solution for those customers who want
to add aftermarket equipment to their factory
source unit, integrate their mobile devices, or
have complete control over their audio signal.
With features like Bluetooth streaming, selectable
crossover types and a USB interface, the versatility
is endless.
®
A2DP wireless audio streaming via the included dongle allows you to listen to audio from
any BLUETOOTH enabled device.
BALANCED LINE DRIVER
Rockford’s 2 channel Balanced Line Driver
improves the performance of any aftermarket or
factory radio. Designed to eliminate system noise
and compatible with high level (speaker) inputs or
low level (RCA) inputs.
RF LINK
Rockford’s proprietary RF Link is a bus-power component connection system enabling
integration and control of all RF Link equipped products. The use of this system allows for
the expansion of auxiliary controls and managed system turn on.
RF-BLD
FREQUENCY NORMALIZATION OF AUDIO SIGNALS
U.S. Patent (7,778,718,B2)
UNIVERSAL PUNCH EQ
Looking to add Rockford’s patented Punch EQ
to any aftermarket audio system? Plus in need of
features like high to low signal conversion, a line
driver and auto turn-on.
Frequency normalization is achieved by characterizing the frequency response of the
audio source based on a reference input signal. This reference input signal is used to
establish a reference frequency response, which is stored in memory and used to select
equalizer settings. The system restores missing spectral content by summing multiple
input signals from the audio source. The system then normalizes the frequency response
based on characterizations of the signal by utilizing equalizer settings from memory.
RFPEQU
3SIXTY GRAPHIC USER INTERFACE (GUI)
INPUT CHANNEL CONFIGURATOR
HIGH TO LOW CONVERTER
OUTPUT CHANNEL CONFIGURATOR
What happens when your radio isn’t equipped with
RCA inputs? Rockford offers high (speaker) to low
(RCA) level converters in 2 or 4 channel versions.
RF-HLC4
CHANNEL SUMMING
CONFIGURATOR
Input/Output
AUX Inputs
Input Voltage Output Voltage
Auto
Turn-On
8 Speaker/RCA
Balanced/Unbalanced
Stereo/Digital
(SPDIF)
2V-24V
8V RMS
Unbalanced/Balanced
RF-BLD
2 Speaker/RCA
Balanced/Unbalanced
N/A
650mV-10.5V
RFPEQU
2 Speaker/RCA
Balanced
N/A
RF-HLC4
4 Speaker/4 RCA
RF-HLC
2 Speaker/4 RCA
ADJUSTING INPUT GAIN
3SIXTY.3
3Sixty interactive graphic user interface allows for control
of the crossover type, slope, high/low pass filter, the 248
band parametric eq, phase and time delay.
77
Remote
Dimensions
6V DC Offset
Master or Sub
Level/PEQ/ EQ
Presets/Input
H 1.75” x W 5.125” x L 9.25”
11V RMS Unbalanced
22V RMS Balanced
6V DC Offset
N/A
H 1.32” x W 5.90” x L 4.09”
600mV-10V
10V RMS Unbalanced
6V DC Offset
PEQ
H 1.1” x W 3.15” x L 4.72”
N/A
Up To 10.5v
Up To 3v
N/A
N/A
H 1” x W 1.56” x L 3.5”
N/A
Up To 10.5v
Up To 3v
N/A
N/A
H 1” x W 3” x L 3.5”
BLUETOOTH / POWERED LOADED
PUNCH POWERED LOADED
UNIVERSAL STREAMING TO RCA
The PUNCH PS-8 amplified subwoofer
enclosure is designed for those tight spaces
where most woofer enclosures won’t fit.
With its low profile design and integration
capabilities, this powered woofer system
provides all the bass without taking up all
the space, Mounting height is only 3.3” and
comes with its own wiring kit!
The RFBTRCA universal Bluetooth™ adapter allows you to
wirelessly stream media (music library, Pandora, Rhapsody, etc)
from a Bluetooth™ enabled device directly to an RCA input and
is powered by a direct 12v power connection.
RFBTRCA
UNIVERSAL STREAMING TO AUXILLIARY
RFBTAUX
If your vehicle didn’t come with built-in Bluetooth, now you
can easily stream music from your smart phone, tablet,
or laptop directly to the vehicle’s AUX input, using our
RFBTAUX Universal Bluetooth Adapter.
Cable
Length
AUX
Output
Input
Signal
USB Charging
Voltage
RFBTAUX
5 ft.
1/8” Stereo Jack
BLUETOOTH
V3.0+EDR
5V/1A
RFBTRCA
3 ft.
1/8” Stereo Jack
BLUETOOTH
V3.0+EDR
N/A
PS-8
AVAILABLE IN 10” AND 12”
POWERED LOADED SOLUTIONS
Punch Powered Loaded enclosures are the quick and easy to install
bass solution to upgrade your factory or aftermarket stereo system.
POWERALL MOBILE DEVICE CHARGER
The Rockford Fosgate RFC-350 is the personal charging
device everyone needs. Featuring a rechargeable
9000mAh battery pack, this device charger has all the
needed power for the person on the go who often finds
themselves without access to a charger or wall outlet.
Able to charge mobile devices via a 5V micro USB
connection up to 2.1 Amps, this compact unit has all
the juice you need to keep your devices running. And
speaking of running, this handy unit can help you even
when your vehicle no longer does because of a dead
or drained battery. It stores enough power to jump start
a vehicle with up to 350 amps of output capability to
get you back on the road. Additionally, it also features
an LED flashlight with 3 modes of operation: Solid ON,
Strobe and S.O.S.
RFC-350
Input Voltage
Output Voltage
5v/1A (USB)
5v /2.1A (USB)
12v/350A
USB Charging
Voltage
Dimensions
5V/1A
5.4”x3.3”x1”
RFC-350
P300-12
Integrated grille included.
Speaker
Size
Rated Power
Signal Input
Auto
Turn-On
Remote
Dimensions
P300-10
10”
300 watts RMS/
600 watts PEAK
Low-Level (RCA) or
High-Level (Speaker)
12v REM, 6V DC Offset,
Audio Signal
Included Punch Level Control
(PLC)
H 13.3” x W 18.38” x L 9.37”
P300-12
12”
300 watts RMS/
600 watts PEAK
Low-Level (RCA) or
12v REM, 6V DC Offset,
Audio Signal
Included Punch Level Control
(PLC)
H 14.96” x W 20.35” x L 11.5”
8"
150 watts RMS/
300 watts Peak
Low-Level (RCA) or
12v REM, 6v DC
Offset, Audio Signal
Included Punch LevelControl
(PLC)
H 3.3" x W 13.9" x D 9.4"
PS-8
79
Three different automatic turn-on modes;
REM (+12V), DC Offset, and Audio Signal.
T3 BMW
DIRECT
FIT SPEAKERS
BMW
DIRECT
FIT SPEAKERS
FLEXIBLE FITMENT SYSTEM
INCLUDED Optional
Mounting Bezel
Utilizing three unique OEM frame styles
creates a TRUE direct fit solution for
2004 and newer BMW vehicles.
EXAMPLE 6-SERIES
This system upgrade requires using all three
frame styles to be able to replace
all the factory speakers.
FRAME STYLE ONE
FRAME STYLE TWO
The included in-line crossover is equipped with
OEM connectors and either a 0dB (reference) or
+3dB amplitude increase to the tweeter.
T3-BMW1
FRAME STYLE THREE
Multi-purpose connector; direct fit OEM
connector or aftermarket spade terminal.
T3-BMW2
VISIT ROCKFORDFOSGATE.COM/PRODUCTS/FITMENTGUIDE FOR:
81
Speaker
Size
Tweeter
Size
RMS Power
Handling
Peak Power
Handling
Frequency
Response
Sensitivity
(1W/1M)
Sensitivity
(2.83V/1M)
Mounting
Depth
T3-BMW1
4”
1”
50 watts
100 watts
75Hz - 20kHz
90dB
93dB
1.14”
T3-BMW2
4”
1”
50 watts
100 watts
75Hz - 20kHz
90dB
93dB
1.25”
T3-BMW3
4”
1”
50 watts
100 watts
75Hz - 20kHz
90dB
93dB
1.66”
Vehicle Fitment Guide
Installation Videos
Make
Model
Chassis
Year
T3-BMW3
The American Wire Gauge standard was developed to rationalize selecting wire for a particular
purpose. In an electronic environment, wire size can have a significant impact on performance.
Rockford Fosgate products are designed and engineered to perform at a superior level. It is
only fitting that the accessories linking them together perform with the same expectation.
4 AWG
8 AWG
10 AWG
RFK1D
RFK4I
RFK8I
RFK1D - Dual Amp Kit
RFK1 - Power Only Kit
RFK4D - Dual Amp Kit
RFK4X - Complete Kit
RFK4i - Power w/
Interconnect Kit
RFK8X - Complete Kit
RFK8i - Power w/
Interconnect Kit
Dual Twisted Pair
Twisted Pair
Coupler
POWER KITS
RF ACCESSORIES
EXCEEDING THE STANDARD
1/0 AWG
RFK10I
RFK10i - Power w/
Interconnect Kit
INTERCONNECTS
THE AMERICAN WIRE
GAUGE STANDARD
The American Wire Gauge standard specifies the
exact amount of copper needed to indicate a
specific wire diameter or gauge. Rockford Fosgate
accessories are all designed and engineered in
accordance with the AWG specification.
RFIT-20
RFI-20
RFIS
• Available 3ft - 20ft
Length
• Y-Adapters
• Couplers
Battery Clamps
Fuses
Terminals
Battery Post Adapters
Fuse Holders
ANATOMY OF WIRE
The construction of wire is broken out into three
elements, strands, clusters and bundles. Varying
these combinations will directly change the wire
gauge and significantly effect the flexibility of
the wire.
RFDB1
RFT1
RFDGM
RFFANL
• ANL Style 500-100A
• MAXI Style 100-50A
• AGU Style 60-30A
• Set Screw - 1/0 AWG &
4 AWG
• Crimp - 1/0 AWG, 4AWG
& 8 AWG
• Barrier Spades - 4 AWG &
8 AWG
RFDGM - GM Battery
Post Adapter
RFDGML - GM Battery
Post Adapter for Double
Stacked Terminals
1/0 AWG
4 AWG
8 AWG
Speaker Wire
RFFANL - Inline ANL or MAXI
Fuse Holder
RFFAGU - Inline AGU Fuse
Holder
RFFMAXI - Inline MAXI Fuse
Holder
RFFDAGU - Fused AGU Distribution Block
RFD1 - 1/0 AWG Distribution
Block
RFD4 - 4 AWG Distribution Block
RFW4R
WIRE SIZE IMPACTS SYSTEM
PERFORMANCE
The smaller the wire gauge (copper content) the
greater the resistance which results in a loss in
power to your amplifier(s) and speaker(s), thus
creating a poor performing audio system!
RFW1R-51
RFW4B
• Red or Black
• 100ft Spool
Hybrid
Electrolytic
RFWP12
• 12 AWG, 16 AWG, 18 AWG
• 250/1000 ft Spool or Packaged
• Red or Black
• 250ft Spool
Deadskin
Powerall
RFC10HB
ROCKFORDFOSGATE.COM
Don’t forget to use our Amp Wire Calculator to optimize
output with properly sized wire.
83
RFC10HB - 10 Farad Hybrid Digital
Capacitor
RFC2D - 2 Farad Hybrid Digital
Capacitor
RFC1
RFC1D - 1 Farad Digital Capacitor
RFC1 - 1 Farad Capacitor
RFDS
RFDS - Sound Damping
Material 20’ square feet
RFC350
POWERALL RFC-350 - Portable
Charger/Car Jumper Cables
FOR ADDITIONAL INFORMATION ON ACCESSORIES, PLEASE VISIT ROCKFORDFOSGATE.COM
CAPACITORS / DEADSKIN
• Red or Black
• 51ft Spool
RFW8B
POWER WIRE
RFFU30
RFDB1 - 1/0 AWG +/Battery Clamp
DISTRIBUTION
• Available 3ft - 20ft Length
• Y-Adapters
AMPLIFIERS
SUBWOOFERS
SPEAKERS
SOURCE UNITS
AMPLIFIERS
SUBWOOFERS
SPEAKERS
SOURCE UNITS
SOURCE UNITS
Rockford’s PMX series of source units and remotes are
fully tested against UV radiation degradation as well as
tested to IPX water intrusion standards. We also fully
test the units for ever changing environmental conditions such as temperature extremes, as well as vibration
testing to make sure they can take a bump and keep
performing like a Rockord product should.
SOURCE UNITS
Rockford’s element ready product line takes into
account the effects of the environment and takes
measures to ensure lasting performance.
Alternate
UV Inhibitor Materials – Centrex and ASA plastic
materials are used for their UV radiation resistance
and components are tested in accordance with
ASTM D4329 testing and certification procedures.
Corrosion Protection (Speakers) – Components
are tested for salt spray corrosion resistance and
conform to ASTM B117 certification.
Thermal Shock Tested – Products are tested for
extreme temperature operation as well as severe
fluctuations in ambient temperature. Components
are taken to both low and high temperature extremes
and then tested to ensure operational capabilities.
Corrosion Protection (Electronics) – Two part
epoxy coated PCB boards prevent corrosion of
critical components due to exposure in moisture
rich environments.
Stainless Hardware – Stainless hardware is used
due to its natural resistance to corrosion and rusting.
This ensures that electrical connections will not degrade over time due to exposure to the elements.
Vibration – Knowing our equipment will not be
sitting still, we subject it to full vibration and shock
testing to ensure that it will take abuse and keep
performing to our stringent standards.
SUBWOOFERS/SPEAKERS
Rockford knows that when you shop for speakers for
your boat, UTV or motorcycle, you are looking for
something that is not only going to sound amazing but
stand up to the elements. We specify high grade UV
resistant materials for our speaker housings and grilles
and make sure that they meet ASTM testing standards.
We also subject them to salt spray (fog) testing to
make sure that exposure to the environment will not
cause issues with corrosion, both from a hardware or
electrical connection standpoint.
SUBWOOFERS/SPEAKERS
Water Tested – IPX5 and IPX6 Ratings allow for
the components to be directly sprayed with water
without water incursion.
AMPLIFIERS
87
Dust – We make sure that displays and motor
structures are sealed up tight so they look as clear
as possible and perform day in and day out no
matter how many times you hit the trails.
AMPLIFIERS
Our Moto-marine amplifiers have not only the capabilities
you expect a Rockford amp to have, but we have designed them to stand up to the environmental conditions
you are likely to subject them to. With corrosion resistant
stainless steel hardware and two-part epoxy coated
circuit boards, these units are designed with you in mind.
Whether on the lake, on the road or in the back woods
these amplifiers are ready for an adventure.
12
dB/OCT
CROSSOVER
SLOPE
YEAR
OHMS
YEAR
2 1
2/1
LIMITED
WARRANTY
FREE*
EXTENDED
WARRANTY
IMPEDANCE
STABILITY
dB/OCT
12
CROSSOVER
SLOPE
YEAR
OHMS
YEAR
1 1
4/2
LIMITED
WARRANTY
FREE*
EXTENDED
WARRANTY
IMPEDANCE
STABILITY
LIMITED
WARRANTY
OHMS
AMPLIFIERS
AMPLIFIERS
YEAR
dB/OCT
12
1
4/2
CROSSOVER
SLOPE
IMPEDANCE
STABILITY
*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE
SAME GREAT PUNCH AMPLIFIERS IN AN ELEMENT READY PACKAGE
Punch is a name that has been synonymous with car
audio for over 35 years. The mobile audio enthusiast in
most cases is well versed in the quality and history of the
Punch family of products. When we redesigned the mobile
amplifier line in 2013 we knew that this new breed of Punch
products would far surpass anything we had built previously.
By integrating new circuit designs and developing our
C.L.E.A.N. setup technology our engineers have created
an amplifier family with capabilities not seen before.
With the expansion of our Moto/Marine category this year,
we wanted to offer that same amplifier offering, but in an
WHEN SIZE, POWER AND THE ELEMENTS ARE A
CONCERN THESE AMPLIFIERS HAVE YOU COVERED
Knowing your life isn’t restricted to just the highways and
byways, Rockford Fosgate introduces their new series of
Element Ready small chassis Power amplifiers. Building on
the successful launch of the Mobile audio version of these
amplifiers last year and seeing how many of our customers
were also using them in their motorcycles, UTVs and boat
systems, the Rockford Engineers wanted to create a version
that was geared more toward a life in the elements.
MODELS SHOWN | TM500X1br, TM400X2ad
91
Our new Element Ready series of Power amplifiers have all
the same benefits and features of their Mobile counterparts,
but we’ve also added additional protective components
knowing these are not likely to be safe in the trunk of your
car. With features like a brushed aluminum chassis with
UV inhibitors added to the finish to a Marine grade two-part
epoxy coating on the circuit boards, these small chassis
powerhouses will let you continue enjoying your tunes while
hitting the trails or cruising the lake with friends.
MODELS SHOWN | PM1000X1bd, PM400X4, PM300X2, PM1000X5
Element Ready chassis. This new breed of Punch amplifier
has all the amazing features as the mobile version but
also now incorporates some of the necessary elements to
help it withstand the off-road and on the water conditions.
Featuring a brushed aluminum finish with UV inhibitors,
a two-part epoxy coated circuit board and marine grade
stainless steel hardware, these amplifiers are designed to
give you all the performance you expect with the peace of
mind that they will stand the test of time.
PRIMED TO HIT THE ROAD, TRAILS OR LAKE AND DELIVER THE TUNES
Incorporating many of the technology elements that
Rockford is known for, our Prime series of Element Ready
amplifiers are an ideal choice if you are trying to build a
system on a budget. With our high efficiency circuit design,
these amplifiers are ideal for vehicles with limited electrical
systems. They can easily exceed their power ratings giving
you every watt you deserve and then some.
Built with a powder coated cast aluminum heat sink with
integrated UV inhibitors and two part epoxy coated circuit
boards, these amplifiers have been fully tested for all kinds
of environmental conditions. Along with incorporating
features such as variable crossovers and our famous Punch
EQ circuit further completes the package making the Prime
amplifiers a perfect choice for your system.
TH E G UT S
OF AN AMPLIFIER
Organizing the combination of parts that make up the guts of an amplifier tremendously
impacts its performance capabilities. A change in topology type matched with a variation
of power supply components deliver a higher power output and enhanced audio quality.
Rockford’s proprietary amplifier topologies and electrical technologies in our amplifier
lineup will drive your system to new heights.
HEAT SINK
MOSFETS
CONFORMAL COATED
CIRCUIT BOARD
MARINE GRADE
STAINLESS STEEL
TERMINALS
93
RCA
Heat Sink - This heavy outer shell
protects the parts inside by transferring
away the heat made reproducing an
audio signal (music).
MOSFETs - A type of transistor used to
amplify audio signal (music). You’ll see
more of these guys lined up as wattage
demands increase.
Conformal Coated Circuit Board Sometimes referred to as the PCB, is
used to connect this-to-that through tiny
lines of copper across multiple layers
of pathways.
Power Supply - A.K.A. the transformer,
as the name suggest it takes the
incoming voltage and converts it to a
useable voltage for speakers.
Marine Grade Nickel Plated Terminals These are the connection points for the
speakers or subwoofers and the power
source (battery) for the amplifier.
RCA - These are the connection points
for the audio signal (music) coming
from the audio source (radio). RCA
connectors are most commonly used.
BESt
GOOD
MATERIAL HIErARCHY
MODELS SHOWN | M1200-1D, M400-4D, M600X5
POWER SUPPLY
500WATTS
400WATTS
750WATTS
1200WATTS
400WATTS
4.3”
6.8”
Extruded Aluminum w/ UV
Inhibitors
and UV Inhibitors
Molex; Marine Grade Nickel Plated
Set-Screw or Pigtail
Marine Grade Nickel Plated
Set-Screw
8.3”
with Auto Turn -On
1.6”
Balanced Differential;
High-Level Capable
2”
TO-220 Bipolar Transistors
9.1”
Transformer
• Our small footprint design makes these an ideal choice when space is
a concern such as on a motorcycle or UTV.
• Active heat management and forced air cooling ensures these
amplifiers will deliver the power all day long.
4 Layer 2oz. Copper Circuit Board
w/2-Part Epoxy Coating
*TM400X4ad MODEL SHOWN
300WATTS
500WATTS
1000WATTS
300WATTS
400WATTS
500WATTS
400WATTS
600WATTS
600WATTS
• Designed with efficiency in mind, the Element Ready Prime amplifier
family produces high output power without excessively taxing your
electrical system.
• With a powder coated cast aluminum heat sink, epoxy coated circuit
boards and stainless steel hardware these amplifiers are ready to hit
the trails or the lake any time.
*M750-1D MODEL SHOWN
400WATTS
600WATTS
1000WATTS
6.8”
7.8”
and UV Inhibitors
and UV Inhibitors
Marine Grade Nickel Plated C-Clamp
compression
Marine Grade Nickel Plated
Set-Screw
2.4”
with Auto Turn-On
Transformer
*PM1000X1bd MODEL SHOWN
13.3”
2”
11.1”
TO-220 MOSFETs
Ferrite CoreTransformer
• Using a marine grade two part epoxy coating on the circuit boards, we
ensure that these amplifiers will continue to function without
concern of corrosion or rust buildup.
• Marine grade stainless steel hardware is used for all electrical
connections making sure that they remain corrosion free so your music
will sound good no matter what environment your in.
• Our ultra-efficient 4-channel amplifier design uses the latest full range
Class D technology to provide crisp clear sounds without taxing the
electrical system.
• Amplifiers are optimized for multi-channel systems layouts from simple
to complex and are stable to 2 ohms per channel.
*M600-4D MODEL SHOWN
96
1 ohm mono rated
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
TRANS•ana
circuit board
rated
>105dB
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
High level capable with auto
turn-on balanced differential
RCA inputs
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
RCA inputs and RCA pass thru
75x4 + 200x1 @ 4 ohms
125x4 + 400x1 @ 2 ohms
N/A + 500x1 @ 1 ohm
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
TRANS•ana &
Class bd
PM300X1
200x1 @ 4 ohms
300x1 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
N/A
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
TRANS•ana
PM500X1bd
150x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 250Hz
<1.0%
150mV - 12V
>100dB
N/A
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
Class bd
PM1000X1bd
250x1 @ 4 ohms
500x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
<1.0%
150mV - 12V
>100dB
N/A
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
M400-4D
75x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 4V
>90dB
>50dB
H 2.0” x W 6.8” x L 9.1”
M600-4D
100x4 @ 4 ohms
150x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 4V
>90dB
>50dB
H 2.0” x W 6.8” x L 11.1”
50x4 + 200x1 @ 4 ohms
75x4 + 300x1 @ 2 ohms
150x2 + N/A @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
250x1 @ 4 ohms
500x1 @ 2 ohms
750x1 @ 1 ohm
20Hz - 250Hz
<1.0%
150mV - 4V
>100dB
M750-1D
400x1 @ 4 ohms
800x1 @ 2 ohms
1200x1 @ 1 ohm
20Hz - 250Hz
<1.0%
150mV - 4V
>100dB
M1200-1D
150mV - 12V
>110dB
>60dB
TM400X4ad
100x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>110dB
>60dB
H 1.6” x W 4.3” x L8.3”
(Compact chassis)
TM500X1br
175x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 20kHz
<1.0%
150mV - 12V
>110dB
N/A
PM300X2
100x2 @ 4 ohms
150x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
PM400X2
125x2 @ 4 ohms
200x2 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
PM500X2
150x2 @ 4 ohms
250x2 @ 2 ohms
20Hz - 20kHz
<1.0%
PM400X4
50x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
PM600X4
75 x 4 @ 4 ohms
150 x 4 @ 2 ohms
300 x 2 @ 4-Ohm Bridged
PM1000x5
M600X5
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
Dual fan forced induction cooling
/ DTM™- Dynamic Thermal
Management / MEHSA™- Maximum
Efficiency HeatSink Application
Additional
Features
Protection
<1.0%
Speaker
Terminals
Impedance
Stability
circuit board
20Hz - 20kHz
Power
Terminals
Variable
Crossover
Class br
200x2 @ 4 ohms
200x2 @ 2 ohms
RCA Inputs
Circuit Board
H 1.6” x W 4.3” x L8.3”
(Compact chassis)
TM400X2ad
Heatsink
Design
Topology
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
Channel
Separation
rated
S/N Ratio
Input Sensitivity
circuit board
THD+N @
Rated Power
Class ad w/
Constant Power
Frequency
Response
H 1.6” x W 4.3” x L7”
(Compact chassis)
Rated Power
Dimensions
RCA inputs
8 Ga. Quick
Connect
terminal
16 Ga. 4-pin
Molex connector
+18dB @ 45Hz and/or 0dB to
+14dB @ 12.5KHz with optional
Punch Level Control(PLC2)
rated
RCA inputs
2 ohm mono rated
1 ohm mono rated
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
+18dB @ 45Hz and/or 0dB to
+14dB @ 12.5KHz with optional
Full Range
Class d
circuit board
rated
• Short Circuit
• Thermal
4 Ga. set-screw
connector
10 Ga.
set-screw
connector
+18dB @ 45Hz
H 2.0” x W 6.8” x L 13.2”
Class ab &
Class d
Single layer 2 oz.
copper circuit board
rated(Front/Rear) and 2 ohm
mono rated(Sub)
• Short Circuit
• Thermal
input
4 Ga. set-screw
connector
10 Ga.
set-screw
connector
Punch EQ selectable
from 0dB/+6dB/+12dB @
45Hz(Front/Rear) and Variable from 0dB to +12dB @
45Hz(Sub)
N/A
H 2.0” x W 6.8” x L 9.1”
Class d
circuit board
12 dB/oct - variable infrasonic
1 ohm mono rated
• Short Circuit
• Thermal
4 Ga. set-screw
connector
N/A
H 2.0” x W 6.8” x L 11.1”
10 Ga.
set-screw connector
+18dB @ 45Hz and included
Punch Level Control(PLC)
+18dB @ 45Hz with optional
+18dB @ 45Hz with optional
ROCKFORDFOSGATE.COM
97
10 Ga. nickel
plated Quick
Connect
YEAR
WATTS
300
”
1 2
24
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
M
M
VOICE COIL
XMAX
PEAK TO PEAK
SUBWOOFERS
SUBWOOFERS
YEAR
WATTS
200
”
1 2
14
LIMITED
WARRANTY
M
M
UP TO
RMS POWER
HANDLING
VOICE COIL
XMAX
PEAK TO PEAK
TURN YOUR BOAT INTO A “BOOMER” WITH THESE
PUNCH ELEMENT READY WOOFERS
WHETHER OFF-ROAD OR ON THE WATER, PRIME ELEMENT READY
WOOFERS HAVE YOUR BOTTOM LINE COVERED
Music without the low end is like eating a PB & J without
the J. It’s just not the same and doesn’t feel complete. If
you enjoy the full, rich sound of your audio system in your
car, then why would you accept less in your boat or UTV
system? This is where the Punch Family of Moto/Marine
subwoofers come in. If you’ve had or heard our mobile line
of Punch subs then you know that they have the capabilities
of laying down the bass line and shaking the rust loose from
any ride.
Always looking to offer our customers choices, we introduced
our Prime series of Element Ready woofers. These woofers are
built using many of the same technologies as our Punch woofers
but with the customer who may not be looking the Punch level
sound in mind. If you want the Rockford experience without
breaking the bank then these woofers will deliver.
without again. These versatile woofers are designed to work
in sealed, ported and infinite baffle applications and are built
to withstand the environment. Using UV resistant materials
in the cone, surround and basket assemblies ensure that
they will stand up under the summer sun and our sealed
motor structure with stainless steel hardware prevent any
moisture intrusion or corrosion from occurring making sure
the bass hits hard every time. We even offer them in a Sport
or Luxury grill version to better fit the aesthetics of any boat
or UTV design.
101
S P ORT GRILLE
MODELS SHOWN | PM212S4X, PM212S4B, PM210S4
LUXURY GRILLE
With our Element Ready versions you are now able to take
that bass with you on the lake or on the trail and never go
OPTIONAL COLOR
MODELS SHOWN | RM110D4B, RM112D4, RM18D4
Using ASA injection molded plastics for the baskets and
grills, polypropylene cones and SantopreneTM surrounds all
with integrated UV inhibitors ensures that these woofers will
not break down over time due to exposure to the elements.
Available in a variety of sizes and voice coil configurations,
you’re sure to find one that will fit the application you need.
a n ato m y
SINGLE 4Ω
Mineral Filled Polypropylene
Cone with UV inhibitors
High resistance to
environmental conditions.
OF A SUBWOOFER
250-300
WATTS
Increased stiffness
reduces distortion.
RMS POWER
RANGE
w/ VAST™
Injection Molded Polypropylene w/
UV Inhibitors
Variations in the anatomy of a subwoofer dramatically changes its performance
characteristics. An increase in voicecoil size coupled with a stronger cone material yields
a higher power handling and increased output. By combining quality materials with
Rockford’s proprietary acoustic technologies, our subwoofer lineup is sure to meet your
system’s demands.
Single Nomex Blend w/ Multipoint
Stitched Lead Wire
2” 4-Layer High Temp. KaptonTM w/
NomexTM collar
100% UV Stable Centrex Injection
Molded Plastic
Shielded Ferrite Magnet Structure
SURROUND
*PM212S4 MODEL SHOWN
UV Stable Centrex Injection
Molded Parts
BASKET
CONE
High Rigidity.
Outstanding UV and
weather resistance.
SPIDER
VOICE COIL
MAGNET
DUAL 2Ω
DUAL 4Ω
UV/ Salt Fog Resistant
SantopreneTM Surround
Ideal For changing
environmental conditions.
MATERIAL HIErARCHY
BESt
Basket - Also referred to as the frame
or chassis, this is the skeletal system of
the speaker. Here to keep everything in
its place.
150-200
WATTS
Long Life Span.
RMS POWER
RANGE
UV and Salt/Fog Resistant, Santoprene™
w/ VAST™
voice coil to the basket and controls
the travel of the cone assembly.
Injection Molded Carbon Fiber Filled
Polypropylene w/ UV Inhibitors
Single Aramid Fiber w/ Multipoint
Stitched Lead Wire
GOOD
103
voice coil to the basket and controls
the travel of the cone assembly.
Cone - A.K.A. the diaphragm, this is
Voice Coil - The brains of the operation,
directing the force from the magnet
to push or pull based on the applied
electrical signal.
the force to push and pull cone assembly.
Size, material, and design may differ,
depending on performance goals.
1.5/2.0” 4-Layer High Temp. Aluminum
w/ NomexTM collar
100% UV Stable ASA Injection
Molded Plastic
Moisture, Tear and Fatigue
Resistant Aramid Fiber Spider
High strength.
Maintains flexibility w/ changing
temperatures.
Ferrite Magnet Structure
*RM112D4 MODEL SHOWN
0.154
0.75
1.25 cu. Ft. Port: (1) 4" x 8.52" Infinite
Baffle Compatible
PM212S4/ PM212S4B/
PM212S4X
12"
Single 4 Ω
12
87 db
300
600
11.25"
6.58"
0.258
1
1.5 cu. Ft. Port: (1)3" x 5.74" Infinite
Baffle Compatible
8"
Dual 2 Ω or 4 Ω
7
85 dB
150
400
9.13"
4.4"
0.06
0.75
1.4 cu ft. Port: (1) 3”x8”
RM110D2/
RM110D2B/
RM110D4/
RM110D4B
10"
Dual 2 Ω or 4 Ω
7
89 dB
200
500
11.25"
5.1"
0.150
1.02
1.79 cu ft. Port: (1) 4”x9.3”
RM112D2/
RM112D2B/
RM112D4/
RM112D4B
12"
Dual 2 Ω or 4 Ω
7
89 dB
200
500
9.13"
4.3"
0.101
0.59
1.40 cu ft. Port: (1) 4”x13”
RM18D2/ RM18D2B/
RM18D4/
RM18D4B
Tall Profile, Santoprene
with VAST
Injection Molded
Polypropylene
Injection Molded
Polypropylene
2” 4-layer high temp, aluminum voice
coil with Kapton former and spun-laced
Nomex insulating reinforcement collar
Tear & fatigue resistant Nomex blend spider with
multipoint stitched lead wire technique
Centrex
Shielded ferrite magnet structure
with extended vented pole and
bumped backplate
Proprietary gold
plated compression
terminal. 8 Ga.
Water draining Centrex
trim ring with integrated
stainless steel grill or
luxury grill option
UV and Salt Fog
Resistant Co-Molded
Santoprene Surround
Injection Molded
Polypropylene
Injection Molded
Carbon Fiber Filled
Polypropylene Cone
Body with UV Inhibitors
1.5" 4-layer high temp. copper voice coil
with aluminum former
Tear & fatigue resistant poly-cotton spider with
multipoint stitched lead wire technique and
spider cooling vents
100% UV Stable ASA
Injection Molded Plastic
extended pole piece, vented
aluminum voice coil former and
bumped backplate
Proprietary Corrosion Resistant
Spring Loaded
Push Terminals.
12 Ga.
Water draining ASA trim
ring with integrated grill
2" 4-layer high temp. aluminum voice
coil with spun-laced Nomex™ insulating
ROCKFORDFOSGATE.COM
105
Trim Ring
Sealed Enclosure (cu. ft.)
5.54"
Terminal
Connectors
Speaker
Displacement
(cu. ft.)
9.13"
Motor
Structure
Mounting
Depth
500
Frame
Structure
Mounting
Diameter
250
Spider
Peak Power
Handling
(watts)
86 dB
Voice Coil
RMS Power
Handling
(watts)
10
Cone
Material
Sensitivity
Single 4 Ω
Dustcap
Material
Xmax (mm)
10"
Surround
Material
Nominal
Impedance
PM210S4/ PM210S4B/
PM210S4X
Ported
Enclosure
Speaker Size
[ SUBWOOFER SPECIFICATIONS [
150
1
WATTS
UP TO
RMS POWER
HANDLING
YEAR
LIMITED
WARRANTY
40 - 22
Hz
kHz
FREQUENCY
RESPONSE
SPEAKERS
SPEAKERS
YEAR
WATTS
75
1
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
49 - 20
Hz
kHz
FREQUENCY
RESPONSE
BE THE ENVY OF THE CAMPSITE OR THE SANDBAR
WITH OUR PUNCH ELEMENT READY SPEAKERS
If you want to really crank up the party then our wake
tower speaker enclosures are just the thing you need.
Available with our new horn loaded or coaxially mounted
component design, these cans will make you the envy of
the lake or campsite.
109
OPTIONAL COLOR
OPTIONAL COLOR
RM0652
DOME TWEETER
OPTIONAL COLOR
MODELS SHOWN | RM1652B, RM0652
S PORT GRILLE
HORN TWEETER
OPTIONAL COLOR
S PORT GRILLE
LUXURY GRILLE
S PORT GRILLE
MODELS SHOWN | PM282W, M262-WAKE, PM282HW, PM282B, PM262, PM282X
Our new Element Ready Prime series of speakers shows
that you don’t have to blow your yearly budget just to
get good sound out of your audio system especially
when it has to live in an environment such as your boat,
UTV or even your motorcycle. We’ve designed these
speakers with efficiency and output in mind. Available
with two different tweeter sizes and power handlings,
these speakers can belt out the tunes without needing an
amplifier the size of a nuclear power plant.
RM1652
If you’re someone who truly enjoys their music one way
and that way is all the way up then you need to look at
the Punch family of Moto/Marine speaker and wake tower
cans. These Element Ready speakers are designed to
hold up under the harshest conditions and still belt out
your music just the way you like. Using many of the same
construction materials found on our Marine woofers you
can rest assured they will keep on rocking regardless of a
little mud or water getting on them.
BIG THINGS TRULY DO COME IN SMALL PACKAGES.
OPTIONAL COLOR
Using UV inhibitor based materials and corrosion resistant
hardware these speakers are designed with the person
who lives for the outdoors in mind. So if you’re looking for
a speaker that is built with the quality and to the standards
the Rockford expects of all its products and will stand up
to your active lifestyle then these are the speakers for you.
f r a m e wo r k
2WAY
8.0”
HORN WAKE
OF A SPEAKER
Modifications to the framework of a speaker significantly impact its sonic signature.
Combining various materials will strengthen, add volume and resonate the music to a
desired sound. By intertwining superior speaker designs with Rockford’s proprietary
acoustic technologies in our speaker lineup we are sure to bring your music to life.
Coaxially mounted horn loaded tweeter w/
Neodymium motor structure
High Quality 6dB High pass crossovers
using Metalized Polyester Film
Capacitors
UV & Salt-Fog resistant TPE (Thermo
Plastic Elastomer) surround
w/ VAST™
Injection molded mineral filled polypropylene with UV inhibitors
SURROUND
CONE
TWEETER
• Our high output horn tweeter and midrange speaker assembly
with their Neodymium motor structures are designed for high
volume applications.
• Enclosures are constructed of high density poly-ethylene, have a
paint and clear coat finish with integrated UV inhibitors and are
available in black or white colors (Same as PM282W wake speakers).
High Density Poly-ethylene Enclosure
with UV Inhibitors
Hi power Neodymium magnet
structure
*PM282HW MODEL SHOWN
BASKET
CROSSOVEr
2WAY
8.0”
MAGNET
WAKE
MATERIAL HIErARCHY
BESt
GOOD
111
Tweeter - Composed of the same
parts as an speaker, surround,
cone, voice coil, basket and
magnet. Just on a smaller scale.
Cone - A.K.A the diaphragm, this is
Crossover - Works like a switch
board, directing the audio signal
through caps, filters and switches
to the appropriate speaker.
Basket - Also referred to as the
frame or chassis, this is the skeletal
system of the speaker. Here to keep
everything in their place.
UV & Salt-Fog resistant TPE (ThermoPlastic Elastomer) surround
w/ VAST™
Surround - Works in harmony with
the spider, attached to the cone to
maintain the centering of the voice
coil in the magnetic gap.
Magnet - The heart of speaker,
creating the force to push and pull
cone assembly. Size, material, and
design may differ, depending on
performance goals.
High Density Poly-ethylene Enclosure
with UV Inhibitors
Bridge mounted component grade coated
aluminum alloy tweeter
Integrated 6/12 dB per octave sealed
crossover.
Injection molded mineral filled polypro
pylene with UV inhibitors
• Our 8 inch full range cans come loaded with our PM282 speakers and
produce crisp and clear full range sound for those not only in the boat
but out as well.
• Our 8 inch cans ship with a surface mount bracket included and an
optional tubular clamp is also available for wake tower mounting.
• Mounting assemblies feature security Torx hardware, safety lanyards
and 359 degree rotation capabilities for directional adjustments.
Hi power Ferrite magnet structure
*PM282W MODEL SHOWN
2WAY
6.0”
2WAY
6.5”
WAKE
Grill Integrated Proprietary LCP Dome
Tweeter
crossover.
Capacitors
w/ VAST™
UV and Salt Fog Resistant Co-Molded
Santoprene Surround w/ VAST™
High Density Poly-ethylene enclosure
with UV Inhibitors
Hi power Ferrite magnet
structure
Injection molded Carbon Fiber filled
polypropylene with UV
inhibitors
• Our 6 inch full range wake cans use our PM262 full range speaker and
are available in black or white finishes.
• The 6 inch can assemblies are shipped with both a surface mount and
tubular clamp assembly for versatile mounting options.
• Our Marine RM1 full-range speakers are perfect for anyone looking to
add some FANATIC sound to their vessel or side-by-side.
• With our specially designed volcano dome LCP tweeter the RM1
speakers produce crystal clear highs even when rocketing across the
lake or racing up the sand dunes.
*PM262-WAKE MODEL SHOWN
100% UV stable ASA injection molded
plastic
Linear, high excursion matched motor
magnetics and suspension
design
*RM1652 MODEL SHOWN
2WAY
6.5”
2WAY
6.0”
8.0”
Grill Integrated LCP Dome Tweeter
Capacitors
crossover.
UV and Salt Fog Resistant Co-Molded
Santoprene Surround w/ VAST™
w/ VAST™
Injection molded Carbon Fiber filled
polypropylene with UV
inhibitors
100% UV stable Centrex™ injection
molded plastic
100% UV stable ASA injection molded
plastic
design
*PM262 MODEL SHOWN
113
• The PM2 full range speakers incorporate a 1 inch aluminum alloy component tweeter, coaxially mounted over the midrange, to
produce crisp and clear full range sound for you to enjoy while
relaxing on the water.
• To compliment your vehicle’s interior the PM2 full range speakers
are available in both a black and white sport grill and a white luxury
grill option.
• Our 2-way component system with a coaxially integrated tweeter is
built using stringent marine grade weather proofing technologies to
ensure the speakers will perform under the harshest conditions.
• Using high grade internal crossover components ensures that both
the tweeter and midrange produce high quality sound and play the
frequencies they are supposed to..
design
*RM0652 MODEL SHOWN
91 dB
2.8"
PM282/
PM282B/
PM282X
8"
1.0"
100 watts
200 watts
48Hz - 22kHz
90 dB
93 dB
3.4"
RM0652/
RM0652B
6.5"
.5"
50 watts
100 watts
52Hz - 20kHZ
88 dB
91 dB
2.5"
RM1652/
RM1652B
6.5"
1.0"
75 watts
150 watts
49Hz - 20kHz
89 dB
92dB
2.5"
Terminal
Connectors
Mounting
Depth
88 dB
Crossover
Sensitivity
(2.83V/1M)
53Hz - 22kHz
UV & Salt-Fog
resistant TPE
(Thermo-Plastic Elastomer) Santoprene
surround
filled polypropylene cone
body with UV inhibitors
Moisture, tear and fatigue
resistant aramid fiber
spider
UV stable Centrex™ 814 injection
molded plastic parts
Linear, high excursion
matched motor magnetics
and suspension design
1” (25mm) bridge mounted component
grade coated aluminum alloy tweeter
Integrated 6/12 dB per octave sealed crossover.
Corrosion resistant gold plated
polarized input terminals
UV and Salt Fog
Resistant Santoprene
Surround
filled polypropylene cone
body with UV inhibitors
Moisture, Tear and Fatigue
Resistant Aramid Fiber
Spider
100% UV Stable ASA Injection Molded
Plastic Parts
Linear, high excursion
matched motor magnetics
and suspension design
Grill Integrated 1" Proprietary LCP
Dome Tweeter
High Quality 6dB High pass crossovers using Metalized
Polyester Film Capacitors
Proprietary Corrossion Resistant
Spring Loaded Push Terminals
Tweeter
Sensitivity
(1W/1M)
150 watts
Motor
Structure
Frequency
Response
75 watts
Frame
Structure
Peak Power
Handling
(watts)
1.0"
Spider
RMS Power
Handling
(watts)
6"
Cone
Material
Tweeter Size
PM262/
PM262B/
PM262X
Surround
Material
Speaker Size
Grill Integrated 0.5” LCP Dome Tweeter
Dimensions
(HxWxD)
WAKE CANS
Peak Power
Handling
(watts)
M262-WAKE/
M262B-WAKE
RMS Power
Handling
(watts)
PM282HW/
PM282HW-B
HORN WAKE CANS
Nominal
Impedance
PM282W/
PM282W-B
WAKE CANS
Speaker Size
[ WAKE SPEAKER SPECIFICATIONS [
8" woofer/ 1"
Aluminum
Tweeter
4Ω
100 watts
200 watts
14.2" x 9.1" x 10.09"
8" woofer/ 1"
Horn Tweeter
4Ω
150 watts
300 watts
14.2" x 9.1" x 10.09"
6" woofer/ 1"
Aluminum
Tweeter
4Ω
75 watts
150 watts
10.96" x 7.03" x 11.26"
ROCKFORDFOSGATE.COM
115
SOURCE UNITS
DESIGNED AND ENGINEERED WITH A PURPOSE AND YOU IN MIND
Rockford has long recognized a person’s desire to easily
connect with their music. With that in mind we set out to
create a purpose built line of Moto/ Marine source units
equipped with all the latest technology and features. In
looking at the market, we saw that many of the source
units being used in Moto/Marine applications were simply
repurposed mobile audio units and know that they were
not originally designed to be in a boat, UTV or motorcycle
environment. This is why Rockford decided to take the
ground up approach in designing this new source unit line.
MODELS SHOWN | PMX-1R, PMX-5, PMX-2, PMX-8DH, PMX-0R
119
From a hardware standpoint we talked to both industry
professionals and the consumers who use these products
to determine what worked and more importantly what
didn’t. From this we designed several units with varying
capabilities to suit the needs of our customers from a simple
streaming receiver to a hide-away control box with remote
display. We also designed the software and menu system
from the ground up making the menus easy to use and
access. The last thing you want is to be shooting down the
trail fumbling through a complex menu system. If you are
looking for a high quality source unit with a purpose specific
design to be the heart of your system then look no further.
DNA
Full Function Wired Display Head
5"
5” Ultrabright Color TFT Display, IPX6
Certified Faceplate, Optical
Wet Bonded
N/A
OF A SOURCE UNIT
N/A
N/A
A source unit is the heart of any good sound system and flexibility, features and ease
of operation of are often at the top of the list of any customer when it comes time to
decide on which one to use. Rockford has designed their new Marine grade source
units from the ground up with user friendly menu designs, input and output flexibility
as well as multi-zone/ multi-source controllability.
N/A
Thru-hole surface mount, Rear bolt
thru mounting plate/ .625”
mounting depth
*PMX-8DH MODEL SHOWN
EQUALIZATION
ZONE/SOURCE
CONTROL
DISPLAY
5"
• This full function display head is specifically designed for use with
our PMX-8BB and allows total access to all its functions and features.
• Its large 5 inch display makes it easy to see what’s on as well as navigate the custom menus.
MEMORY
INPUT
SIGNAL
Hide-Away Digital Media Receiver
MOUNTING SYSTEM
DEPTH
5"
N/A
Bluetooth, SiriusXM, Pandora, iPod
iPhone, Dual USB, Aux,
A/V, AM/FM/WB
MATERIAL HIErARCHY
BESt
5"
GOOD
121
DISPLAY - The display is how you receive
information from the unit and see the
settings for the internal menus. It can
also display signal and song information
if available.
ZONE/ SOURCE CONTROL - A unit with
multi-Zone/ Source control provides for more
flexibility in system designs by creating
different zones of the system and allowing
different sources to be played in them.
INPUT SIGNAL - The number and types
of input signals a source unit can accept
help determine its flexibility in a system
design and help you determine if it will fit
your needs.
EQUALIZATION - The equalizer allows you to
tune the system to your taste via a multi-band
EQ or our own proprietary Punch EQ circuit.
MEMORY - The internal circuit that
retains all settings and stations when
power is no longer applied to the unit.
MOUNTING SYSTEM - The system by which
the unit mounts into the vehicle and depth of
the chassis helps to determine where you can
mount the unit.
EEprom memory with zero current draw on
power down Nitrile Rubber
4-Zone/ 2-Source
7 Band Equalization + PEQ2
Surface mount/ Hideaway Black Box
w/2.2” height
PMX-8BB MODEL SHOWN
• When joined with the PMX-8DH this hide-away black box unit is a
feature rich command center for your entire audio system.
• Whether installing a small system or a complex multi zone system, this
unit has the features and functionality you’re looking for.
5"
2.7” Full Color TFT Display IPX6 Certified
Faceplate, Optical Wet Bonded
Digital Media Receiver With
Oversized Display
Ultra Compact Digital Media Receiver
5"
Bluetooth, SiriusXM, Pandora, iPod
iPhone, Dual USB, Aux,
A/V, AM/FM/WB
Bluetooth, USB, Aux
N/A
power down
2-Zone/ 1-Source
2-Zone/ 2-Source
N/A
Thru-hole surface mount, Rear bolt thru
mounting plate, Gauge style C-Clamp/
3” mounting depth
thru mounting plate/ 7.25”
mounting depth
*PMX-0 MODEL SHOWN
*PMX-5 MODEL SHOWN
• With its oversized display and single DIN chassis this multimedia receiver is designed for ease of use with a built from the ground up GUI
and menu system.
• If a true multi zone/ multi source capable source unit is what you’re
looking for then this unit has you covered.
Compact Digital Media Receiver
5"
• This compact streaming audio receiver is ideal if you typically play
music via your Bluetooth enabled device.
• Its small size and mounting footprint make it ideal when real estate
is tight.
Full Function Wired Remote
5"
Bluetooth, Pandora, iPod/iPhone, USB,
Aux, AM/FM/WB
N/A
power down
N/A
2-Zone/ 1-Source
Multi-Zone/Source control via source unit
N/A
3” mounting depth
3” mounting depth
*PMX-1R MODEL SHOWN
*PMX-2 MODEL SHOWN
• This compact receiver is perfect when you need the functionality of a
multimedia unit without the size typically associated with them.
• Its multiple mounting options allow for versatility wherever you need to
install it.
123
N/A
• This full function remote control is designed to give you access to all
the same controls and settings you get on the primary receiver units.
• Up to three remote units can be connected to and are designed to
work with the PMX-8BB, PMX-5 and PMX-2 units.
Wired Remote
5"
N/A
N/A
N/A
N/A
N/A
thru mounting plate/ 7.25”
mounting depth
*PMX-0R MODEL SHOWN
• When a compact remote unit is needed for simple control of your multimedia receiver units, the PMX-0R is ideal.
• Up to three remote units can be connected to and are designed to
work with the PMX-8BB, PMX-5 and PMX-2 units.
125
SOURCE UNIT SPECIFICATIONS
Description
Features
Dimensions
Full Function Wired Display Head w/ 5”
Hi-Res Color Display
Illuminated Waterproof Rotary Encoder Volume Control, Front Panel Sub Control, Front Panel Illumination Control, Ultra Slim
Design, Tactile Inverted and Extraverted Buttons for Easy Identification, IPX6 Certification, Back Lit LED Button Illumination
H 4.63” x W 8.00”
Hide-away box Digital Media Receiver
for PMX-8DH 50 watts x 4
Global AM/FM/WB Tuner, SiriusXM Ready, Full iOS/Andriod, Made for iPod, Dual USB Input w/ Video Playback, BLUETOOTH
avrcp 1.5, 2-Source Zone Control, 4-Zone Volume Control, 6 Channel F/R/S 4V Zone 1&2 Preouts, 2 Channel Zone 3&4 4V
Preouts, 7-Band Graphic Equalizer, Punch EQ, A/V Input, Video Output, CAN Ready, Remote Control Ready, EEPROM NonVolatile Memory,Wired Illumination Control, Steering Wheel Control Ready
H 2.20” x W 8.24” x D 6.86”
Digital Media Receiver w/ 2.7” Full-color
Display 50 watts x 4
Global AM/FM/WB Tuner, SiriusXM Ready, Full iOS/Andriod, Made for iPod, USB Input, BLUETOOTH avrcp 1.4, 2-Source Zone
Control, 6 Channel F/R/S 2V Zone 1 Preouts, 2 Channel Zone 2V Preouts, 7-Band Graphic Equalizer, Punch EQ, CAN Ready,
Remote Control Ready, EEPROM Non-Volatile Memory, Front Panel Sub Control, Front Panel & Wired Illumination Control, Illuminated Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination, Steering
Wheel Control Ready
DIN size chassis
w/ 1.75 DIN face
H 3.50” x W 8.00”
Compact Digital Media Receiver w/ 2.7”
Full-color Display 50 watts x 4
Global AM/FM/WB Tuner, Full iOS/Andriod, Made for iPod, USB Input, BLUETOOTH avrcp 1.4, 4 Channel (Front and selectable
Rear/Sub Channel) 2V Preouts, 7-Band Graphic Equalizer, Punch EQ, CAN Ready, Remote Control Ready, EEPROM NonVolatile Memory, Front Panel Sub Control, Front Panel & Wired Illumination Control, Waterproof Rotary Encoder Volume
Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination
H 3.95” x W 4.33”
Ultra Compact Digital Media Receiver
AUX Input, BLUETOOTH avrcp 1.4, 4 Channel (Front and selectable Rear/Sub Channel) 2V Preouts, Front Panel Sub Control,
Front Panel Illumination Control, Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED
Button Illumination
H 2.25” x W 4.00”
PMX-1R
Full Function Wired Remote w/ 2.7”
Full-color Display for PMX-8BB, PMX-5,
PMX-2
Multi Zone Control (PMX-5 & PMX8), Front Panel Sub Control, Waterproof Rotary Encoder Volume Control, Front Panel
Illumination Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination
H 3.95” x W 4.33”
PMX-0R
Wired Remote for PMX-8BB, PMX-5,
PMX-2
Front Panel Sub Control, Waterproof Rotary Encoder Volume Control, Front Panel Illumination Control, IPX6 Front Panel
Certification, Back lit LED Button Illumination
H 2.25” x W 4.00”
PMX-8DH
PMX-8BB
PMX-5
PMX-2
PMX-0
COMPLETE AUDIO KITS
INSTALLATION KITS
SPEAKER ADAPTERS
140
2-CH SYSTEM
[ R1-HD2-9813 ]
RF ACCESSORIES
RFKHD9813
(1) 140 Watt 2-Channel Amplifier
MOUNTING PLATE AND WIRING HARNESS
COMPLETE AUDIO KIT
• The RFKHD9813 amplifier installation kit works with both the Power small chassis and PUNCH PBR series amplifiers.
• The aluminum mounting plate adds additional thermal mass to the amplifier’s heat sink to improve performance and power output.
• This complete installation kit includes an amplifier mounting plate and hardware, pre-terminated power and ground wires and
pre-terminated speaker wires.
160
4-CH SYSTEM
[ R1-HD4-9813 ]
COMPLETE AUDIO KIT
With 4 speakers, mounting plate and
wiring harness
*TM400X4ad Shown
*PBR300X4 Shown
FITS HARLEY - DAVIDSON® MODELS
Ultra Classic® Electa Glide®
129
Street Glide®
1998
Tri Glide®
2013
Road Glide®
Road Glide Ultra®
AMPLIFIER/SPEAKER INSTALLATION KIT
With 2 speakers, mounting plate and
wiring harness.
3
3
RECOMENDED 4-CH SYSTEM
Speaker Adapter Rings
PBR300X4
• Our PMSA Haley Davidson speaker adapter rings allow you to easily upgrade your factory speaker.
• Designed for a direct fit application they perfectly align with the factory speaker mounting holes.
• They allow you to install a variety of Rockford Power, Punch and Prime speaker from 6.0 to 6.75 inches.
(4) Speakers
P1675
(1) Amplifier Mounting Plate
With Wiring Kit
RFKHD9813 (4) Direct Fit Front
Speaker Adapters
PMSA675
PBR300X2
(2) Speakers
PMSA675
INTEGRATE
RFKHD9813
PMSA675
P MSA6 5
FITMENT GUIDE
P1675
With Wiring Kit
Speaker Adapters
MOUNTING KIT
SUGGESTED AUDIO SYSTEMS
RF ACCESSORIES
T16
P16
T165
P165
N/A
T400X4ad or TM400X4ad
(4) Speakers
P M S A6 7 5
T1675
FITMENT GUIDE
With Wiring Kit
Speaker Adapters
PMSA675
T1650*
P1650
T1675*
P1675
R165X3
*T1650 and T1675 Will not fit the Road Glide ® models
MOUNTING KIT
INTEGRATE
131
FITS HARLEY - DAVIDSON® MODELS
Ultra Classic® Electa Glide®
RFKHD9813
PMSA675
Street Glide®
1998
Tri Glide®
2013
Road Glide®
Road Glide Ultra®

MARINE - Rockford Fosgate

Transcription

Similar documents

2 x 360 Watts RMS at 4 ohms , 230 V 1`000 VA power supp

SpeakerCraft SC2-50

INTEGRATED AMPLIFIER MIMETISM 15.2 2 x 180 Watts RMS at 8

M12X Series - MacPherson

Concertante - Humble Homemade Hifi

This set of letters is both from the IARDC (Illinois Attorney

Ampeg SVT-CL Schematics

Pole Mounted Obstruction Light

TPCU SERIES - Lumax Lighting

MSR400 MSR250