LC 1000 - Marantec

LC 1000
Light-Duty Trolley Commercial Operator
3 Year Parts
Warranty
™
Twice as many
cycles/hr
compared to
leading brands!
The LC 1000 light–duty trolley commercial operator is a feature-rich system that is designed for
a smooth operation of doors up to 14ft high with a faster open and close cycle, built to
last and guaranteed to provide years of smooth, trouble-free operation. It features a maximum
run timer, a programmable mid-stop, a timer-to-close, a safety reversal system and an advanced
drive system. Its advanced digital Easy Operating System (EOS™) provides a user-friendly set up
which makes for a more efficient and faster installation.The direct current (DC) Smart Motor,
coupled with a belt or chain drive system, ensures an amazingly quiet operation.
Light system (optional)
LC 1000 Specifications (Sectional Door Applications Only)
Radio Controls (optional)
Warranty: 3 year on parts
Operator Features
Travel Rate-Main: 6.3 in/sec
Service-Duty:
19 cycles/hour
(complete full
door cycles)
Push & Pull force:1000 Newton
(1 HPCS™)*
Force adjustment: Independent
up/down if required
Logic Type: Microprocessor with
Built-In Surge Suppressor
Limit Settings: Electronic
Class II - Low Voltage Connections:
Quick Connect Terminals
Display:
8-LED Operation/
Diagnostic system
Protection rating: NEMA 1 (IP20)
Operator weight: 10½ lbs
Dimensions: 14½” x 8 3/8” x 6”
(L x W x H)
Wired Controls
Receiver:
Frequency:
Technology:
Modular,
wireless
code learning
315MHz
(Homelink®
compatible)
Multibit code
Safety and Convenience
•Meets and exceeds all UL 325
requirements
• Easy Operating System (EOS™ )
• External devices Quick Connect
Terminals located on the rear of
the operator for an easier and
quicker installation.
• Pre-wired to accept
photoelectric sensors, radio
controls, and lighting system.
Drive System (Rail)
The best in advanced engineering
and materials. One semi closed fully
assembled drive system with a 14 Ga.
(2 mm) heavy duty, high strength
galvanized steel finished C-rail,
available with a steel-reinforced belt
or a full steel chain.
Door Heights Supported:
7ft, 8ft , 10ft, 12ft and 14ft.
Drive system configuration
availability:
• 7ft, 8ft, 10ft - chain or belt
• 12ft, 14ft - Belt Only
Drive system overall length for
a 7ft. door:
10’-5”
Headroom Clearance
Required:
1¼”
Trolley: Includes emergency
release, easy reconnect
Accessories
3-Button Industrial Control Station
3-button control station. Momentary contact to
open and stop with constant contact to close.
Open/close/stop functionality with lock
capability.
Light system (optional)
Advanced plug-in design compact fluorescent light
(CFL) system. One (1) bulb, 14W Max – not
provided (equivalent to a 60W incandescent). The
light fixture has an integral high impact, heat
resistant, UL recognized plastic, lens cover.
• Adjustable light timer from 30 seconds to
4 minutes 30 seconds.
• 75% reduction in energy usage with
CFL lighting system
Remote Activation (optional)
Remote activation of door by transmitter requires:
• Photo Eye Sensor System
Non-impact, advanced Infrared Safety Sensors
reversing system. Complies with all UL 325
requirements and safety regulations.
• Digital Remote Control Transmitter
Unique, multi-bit technology, LED control
button verification.
• Modular Receiver
Patented concept where the receiver is
simply plugged into the unit.
New Location of Connection Terminals
for External Devices/Accessories and
Modular Receiver Antenna
Innovative concept where the receiver module
and all external devices/accessories are connected
on the rear of the operator, providing quicker
installation, and easier connectivity verification.
* Horsepower comparable in strength (HPCS™), using lifting force specifications to a 1HP
garage door operator.
* Marantec reserves the right to make design and technical specifications changes without notice
Patents: 4 625 291, 4 88 531, 7 009 592 (other patents pending)
™
IDA
International Door Association
Marantec America Corporation
5705 Centerpoint Court • Gurnee, IL 60031
p. 847.478.1500 • f. 847.478.0348
www.marantecamerica.com
Part No. 80302 Rev. 06/2009
Copyright © Marantec America Corporation 2009
3-button industrial control
station. Momentary contact to
open and stop with constant
contact to close with lock
feature.
• Safety reversal (sensing
technology) system, door
stops from closing upon
contacting a person or object.
• Manual emergency release in
case of power failure
• Programmable mid-stop,
On-Command Door Activation
(OCDA™), programmable
“open” mid-stop position
allows the door stop during
open travel at any point
Maximum Run Timer – Protects
against damage to door and
operator, door stops and
reverses
• Timer – to – close feature with
programmable timers; photo
eyes required
Self Learn Force System:
• Monitors and controls motor
force every cycle (Smart Motor™)
to optimize operation force
requirements
Soft Start/Soft Stop:
Electronically Controlled Prevents premature door and
operator wear and provides
quieter operation
Self-Diagnostic System:
• LED error code indicator for a
more efficient (quicker)
installation and system
troubleshooting
• System reset function clears the
system memory and restores
default system settings
Electrical
Power Supply: 120 VAC/60 Hz
Control Voltage: 24 VDC
Motor Voltage: 24 VDC
Thermal
Protection:
Automatic
Line Cord:
6ft (3-Prong)