SUPERFINISHING MACHINE

HONING SUPERFINISHING
SUPERFINISHING MACHINE
VarioFin
CENTERLESS THROUGH FEED
SUPERFINISHING MACHINE
MODULAR MACHINE CONCEPT
SOLUTION TAILORED TO YOUR NEEDS
www.nagel.com
Your benefit
» Economical improvement of surface roughness respectively
creation of the required surface structure – material ratio, plateau
» Improvement of roundness
» Elimination of soft skin after grinding and hard-turning
» Creation of different, defined surface lines
» High process reliability at low piece time (comparable with
grinding)
» Quick setting up
» High flexibility by modular machine concept for different
machining jobs on rotationally symmetrical workpieces
» Low maintenance effort by improved accessibility
Equipped with
» Modular system for the tailor-made solution of your manufacturing job
» Feed rollers with lengths of 900 or 1.100 mm
» Automatic compensation of superfinishing stone wear
Superfinishing of
piston rods
Superfinishing of
gudgeon pins
Superfinishing of
needles
» Powerful, monitored and long-lasting oscillator
» A great variety of extras, e.g. NC controlled adjustment of feed roller
distance, inclination angle, position of oscillation unit etc.
» Automatic loading and unloading adapted to your components
» Connection to centralized or decentralized coolant cleaning system
Superfinishing of
sleeves
Superfinishing of
taper rollers
Technical data
Typ
VarioFin
Range of application
ø 1,5 – 150 mm
Stone guides: max. 10 pieces
Oscillation unit
Oscillation frequency 40 - 47 Hz
Oscillation stroke max. ± 3 mm,
adjustable
Electrical equipment
Operating voltage 400 Volt, 50 Hz
Control voltage DC 24 V
Total connected load without
accessories approx. 10,5 kW
Typ
VarioFin
Lenght of feed rollers
900 mm or 1.100 mm
Air consumption
Air pressure min. 4 bar
Air consumption approx. 30 - 35 Nm³/h
Noise level
max. 75 dB (A)
Dimensions
(L x W x H) 2.070 x 2.100 x 2.200 mm
Required floor space 2.820 x 2.380 mm
Weight
net. ~ 4.600 kg
Feed rate 0,4 - 10 m/min
NAGEL Maschinen- und Werkzeugfabrik GmbH
Oberboihinger Straße 60, D - 72622 Nürtingen
Phone: +49 (0)7022 605 0, Fax: +49 (0)7022 605 334, E-Mail: [email protected], www.nagel.com