EDM BeautyCase ERC-50 - F

EDM BeautyCase ERC-50
NEW
F-Tool EDM BeautyCase ERC-50
The EDM BeautyCase ERC-50 is an ideal, economic starter set for the EDM machining. The
chuck ERC-50 can be used as a quill chuck or for the production of electrodes.
The set contains: 2x FT 02110 ER-Chuck 50 / FT 02107 universal adapter plate with flush
connection / 2 x FT 01073 chucking spigot / 2x FT 01081 prisround /
2x FT 01084 uniholder / misc. skrews and keys
Article no.
FT 02120
Article
FTool EDM BeautyCase ERC-50
Quantity
1 set
Weight
4.68 kg
Code
B
Weight
0.58 kg
Code
A
F-Tool ER-Chuck-50
Construction: ITS chuck system size 50, manual, rustless with self-centring clamping unit.
Fixation:
4 x M8 screws from the back or 4 x M6 stud screws with nuts.
Application: On EDM/WEDM machines for milling, grinding and turning works.
Note:
tension force 4’000 N.
Article no.
FT 02110
90
70
Article
FTool ER-Chuck-50
Quantity
1 piece
Universal adapter plate ERC 50
The universal adapter plate ERC-50 with flush connection and power cable attachment, can be used as a quill adapter on
EDM machines or mounting plate on the metal-cutting machine.
62
Article no.
FT 02107
16
Article
universal adapter plate ERC-50 (with flush connection)
Quantity
1 piece
Weight
0.59 kg
Code
A
Square block ERC-50
56
60
The square block ERC-50 is hardened, rust resistant and grinded very accurate. The block is suited the best for the use on
electrode milling (1), as an angle adapter (2) or as an extension (3).
89
Article no.
FT 02106
Article
Square block ERC-50
Quantity
1 piece
Weight
2.35 kg
Combination examples
70
1
1
2
3
Code
A
F-Tool News
FTool EDM ER-StarterSet ER80
The set contains: 2 x FT 01043 ER chuck 80P / FT 01336 Adapter plate 120 x 82 mm chuck 80/PIN chuck / 2 x FT 01073
Chucking spigot F/A EDM automatic with flushing / FT 01077 Uniblank / FT 01079 Uniplate / FT 01081 Prisround / FT
01084 Uniholder / misc. screws and keys.
The ER-chuck-80P is compatible with the ITS50 / ITS100 / G-centring plates and the FT 01835 F-Tool power plate.
Article no.
FT 02050
Article
FTool EDM ER-StarterSet ER80
Quantity
1 set
Weight
8.00 kg
Code
B
Weight
1.06 kg
Code
A
Shaftholder dm20h7 nitrided
The shaftholder 20h7 is suitable for the collet of electrode holders ∅ 20 mm, with or without indexing bolt.
Article no.
FT 02109
Article
Shaftholder dm20h7 nitrided, with cross slot 5 mm (for 3R shaft)
Quantity
1 piece
Collet chuck holder EcoPack
The collet chuck holders ETS32 are for many applications the appropriate clamping method.
For this application we created this economic EcoPack. The collet chuck holders are sealed with a sealing washer.
Delivered with 1 hook key.
Article no.
FT 02098
Article
Collet chuck holder EcoPack
Quantity
1 set a 10 piece
Weight
8.41 kg
Code
A
without spigots
F-Tool torque wrench
The torque wrench is delivered with a nut 16 mm and is suitable for the clamping of vices, particularly the CentroClamp
FT 02063/64/65.
Article no.
FT 02117
Article
F-Tool torque wrench 3/8“/ 19-110Nm
Quantity
1 piece
Weight
1.21 kg
Code
B
F-Tool PreSet WT
On the PreSet WT the work pieces can be adjusted and controlled comfortably and afterwards put into the metal-cutting
machine. The set-up times on the machine are thereby reduced to a multiple.
Article no.
FT 02122
Article
FTool PreSet WT 500 x 315 90/60
Quantity
1 piece
Weight
47.00 kg
F - Tool Int e r na tiona l • O berd ro f 6 • P. O. Box C H -5040 Sc höf t land AG • Sw it zer land •
Tel. +41 (0)62 739 00 30
•
Fa x +41 (0)62 739 00 39
•
E-Mail: info@f-t ool.com
•
w w w.f-t ool.com
Code
B