J S K I c o n d e n s a t i o n h o o d w i t h s u p p l y a i r

JSKI condensation hood
with supply air
WWW.JEVEN.COM
PAGE 2
JEVEN Kitchen ventilation
Table of Contents
Product description &
Product code
3
Functioning principle, Parts
4
Dimensions
5
Positioning, Design service
6
Exhaust air
7
Pressure loss and sound data
7
Supply air
8
Distribution of supply air, Light
9
We want to help you in design of ventilation
by offering Jeven designer service to your
disposal.
Design Service helps in design and makes
unique proposal solution with Jeven
products.
Contact us:
All rights reserved
[email protected]
010 231 2030
WWW.JEVEN.COM
JEVEN Kitchen ventilation
JSKI Condensation Hood with Supply air
PRODUCT DESCRIPTION
The Jeven JSKI condensation hood has been designed for
kitchens where a comfortable, productive and healthy
indoor climate is required.
The JSKI canopy offers draught-free and drip-free
ventilation with first class working conditions and thermal
comfort.
JSKI is equipped with exhaust and supply air with damper
plates and measurement taps. Supply air is introduced into
the kitchen by supply air columns.
JSKI has special condensation baffles. Supply air columns
ensure that the distribution of supply air is controlled and
flexible.
Modularity makes it easy to vary both the number and
positioning of the supply air columns.
The actual supply air pattern can be manually adjusted
when working near to the canopy.
Supply air columns and condensation baffles are easy to
wash in a dishwasher.
LIGHT AND FILTERS
All Jeven condensation hoods are equipped with lights and
condensation baffles.
MATERIAL
The basic material of condensation hood is stainless steel
(AISI 304).
ACCESSORIES
Covering boards to enclose the area between the top of the
hood and the ceiling.
PRODUCT CODE
JSKI - 3000 x 1500 x 540 -2 x 250 - 2 x 315 +1000 m3/h - 1620 m3/h - CB
Length
Width
Height
Number and size of the supply air connections
Number and size of the exhaust air connections
Supply air flow, m3/h
Exhaust air flow, m3/h
Accessories
CB=Covering boards
WWW.JEVEN.COM
All rights reserved
PAGE 3
PAGE 4
JEVEN Kitchen ventilation
JSKI Condensation Hood with Supply air
FUNCTIONING PRINCIPLE
1. Supply air is introduced through supply air columns
5
1
2. which allows adjustment of the air pattern
3. Heat and steam rise into the hood
4. Condensation and grease particles are removed in the
baffles
2
5. Clean air is extracted
4
3
PARTS
1. Outer casing
2. Supply air connection and damper unit
1
3. Light fixture
4. Cable
5. Condensation baffles, measurement tap for
exhaust air
6. Measurement tap for the supply air (behind the
condensation baffles)
8
6
3
7. Exhaust air connection and damper plate
5
8. Personal supply air nozzle
9. Supply air unit(detachable)
10. Ceiling console
2
11
7
10
2
11. Hanging bracket
4
9
All rights reserved
WWW.JEVEN.COM
JEVEN Kitchen ventilation
JSKI Condensation Hood with Supply air
DIMENSIONS
Wall hood
A
C
A-A
47
øD
K
B
A
E
2
height
width
Module 2
2x36W
F
P
75
Module 1
2x36W
width
M
(module length)
length
Island type hood
Y
C
75
Module 1
Module 2
2x36W
2x36W
47
2
øD
G
E
(module length)
Y
K
F
height
width
P
Y-Y
width
B
M
length
Hoods length, C and P-dimensions can be chosen freely.
Standard dimensions
H=330
Module length
1000, 1500, 2000, 2500, 3000
Width
1100, 1200, 1300, 1400, 1500
H=540
Module length
1000, 1500, 2000, 2500, 3000
Width
1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800
WWW.JEVEN.COM
All rights reserved
B
mm
Height F øD G E min K min M
mm mm mm mm mm mm mm
200
540
500 160 100 400
350
500
500
330
540
290 200 125 700
500 250 150 800
500 110
550 110
65
PAGE 5
PAGE 6
JEVEN Kitchen ventilation
JSKI Condensation Hood with Supply air
POSITIONING
The size of the canopy is determined by the size of the
kitchen equipment. The overhang depends on the type of
equipment and the distance between the hood and the
equipment. For this type of equipment, the overhang
should be at least 300 mm.
The typical distance between the hood side and the floor is
2100-2200 mm.
If the equipment has any doors that open upwards, make
sure there is enough distance to the canopy.
Dishwasher
2100-2200
300
DESIGN SERVICE
Jeven Design Service helps you choose the best solution for your professional kitchen project.
Simply email us a drawing of the kitchen lay-out and a list of the cooking equipment to [email protected]
We will do all the calculations and prepare all the necessary drawings of the canopies.
This service is always free of charge to you.
All rights reserved
WWW.JEVEN.COM
JEVEN Kitchen ventilation
PAGE 7
JSKI Condensation Hood with Supply air
EXHAUST AIR
The recommended exhaust flow rate is max. 250 l/s per
315 mm spigot, duct velocity 3.2 m/s.
The hoods are equipped with a suitable type of
condensation baffles (pressure level 30-50 Pa).
The recommended exhaust flow is 100 to 200 l/s per hood
meter.
Recommended exhaust flow / spigot
Spigot size ø
mm
200
250
315
400
500
Exhaust flow
l/s
m3/h
- 90
- 320
90 - 175
320 - 630
175 - 250
630 - 900
250 - 420
900 - 1510
420 - 700
1510 - 2520
PRESSURE LOSS AND SOUND DATA
Condensation baffle type 2/1
Condensation baffle type 1/1
Pressure loss
80
70
60
50
dB(A) =50
dB(A) =40
40
30
80 100 120 160 200 240 320 400 500 800 l/s
600
80
70
60
50
dB(A) =50
dB(A) =40
40
30
80 100 120 160 200 240 320 400 500 800 l/s
600
3
500 700 1000 1400 1800 2400 m /h
300
Hood length (m)
1
1.5 2.0 2.5 3.0
120
100
Ps (Pa)
Ps (Pa)
120
100
Hood length (m)
1.5 2.0 2.5 3.0
Pressure loss
1
300
500
Sound power level, Lw
Sound power level, Lw
Factor, Kok
Factor, Kok
Hz
Kok
tol.
125
6
±3
250
5
±3
500 1000 2000 4000
4
-2
-8
-15
±2
±2
±3
±4
Hz
Kok
tol.
125
6
±3
3
700 1000 1400 1800 2400 m /h
250
5
±3
500 1000 2000 4000
4
-2
-8
-15
±2
±2
±3
±4
Sound power level Lw in each octave band is computed by adding the corresponding factor, Kok to the sound power
level LpA. Lw=LpA+Kok.
WWW.JEVEN.COM
All rights reserved
PAGE 8
JEVEN Kitchen ventilation
JSKI Condensation Hood with Supply air
SUPPLY AIR
The canopies are supplied from the factory with suitable air flow rates for a pressure level of 25-35 Pa.
Hood height
mm
330
540
Supply air unit width, B
200 mm
500 mm
50-90 l/s
40-70 l/s
100-150 l/s
PRESSURE LOSS, SOUND DATA & THROW LENGHT / SUPPLY AIR UNIT
Spigot ø200 mm. Unit width 500 mm. Hood height 330 mm.
Damper half closed
30
25
20
16
14
12
10
8
7
open
dB(A) =45
dB(A) =40
dB(A) =35
dB(A) =35
25 30
100
40 50 60
100 120 160 l/s
80
200
300
0,5 0,8
1,4
500
m³/h
Damper half closed
Ps (Pa)
60
50
40
30
25
20
16
14
12
10
8
7
Damper half closed
open
dB(A) =45
dB(A) =40
dB(A) =35
dB(A) =30
25 30
100
40 50 60
80
200
100 120 160 l/s
300
500
L0,2 (m)
0,5 0,8
Spigot ø250 mm. Unit width 500 mm. Hood height 540 mm.
30
25
20
16
14
12
10
8
7
60
50
40
Ps (Pa)
Ps (Pa)
60
50
40
Spigot ø160 mm. Unit width 200 mm. Hood height 540 mm.
open
1,4
m³/h
L0,2 (m)
Spigot ø200
Hz 125 250 500 1000 2000 4000
Kok -2
7
4
-5 -19 -26
tol. ±6 ±4 ±2 ±2
±3
±5
dB(A) =45
dB(A) =40
dB(A) =35
dB(A) =30
Spigot ø160
Hz 125 250 500 1000 2000 4000
Kok -2
1
2
1
-7 -16
tol. ±3 ±3 ±2 ±2
±3
±4
Spigot ø250
Hz 125 250 500 1000 2000 4000
Kok 6
8
4
-5 -10 -18
tol. ±3 ±3 ±2 ±2
±3
±4
30
100
40 50 60
200
80
100 120 160 200 l/s
300
0,5 0,8
3
500 700 m /h
L0,2 (m)
1,4
The sound power level (Lw) in each octave band is
computed by adding the corresponding factor Kok to
the sound pressure level (LpA), as in Lw= LpA+Kok
All rights reserved
WWW.JEVEN.COM
JEVEN Kitchen ventilation
PAGE 9
JSKI Condensation Hood with Supply air
DISTRIBUTION OF SUPPLY AIR
LIGHTS
Jeven supply air columns deliver a controlled and flexible
distribution of the supply air.
It is possible to wash the supply air columns in a
dishwasher and the inside of the supply air chambers is
easy to clean.
These columns allow individual adjustment of air patterns
and airflows, which means better indoor climate for the
kitchen staff
1
2
1 Light fixture as standard, IP 54-67
T8:
B=111mm,(1x18W, 1x36W, 1x58W)
B=168mm, (2x18W, 2x36W, 2x58W)
Colour temperature 840(Cool White)
2 About 2m cable, type EKK 3x1,5
3
1
2
By default, every hood module comes with a light fixture.
The light fixture has a cable which should be connected
to a junction box with a cable lock.
The junction box is not included.
1 Unidirectional thrown pattern
2 Displacement thrown pattern
3 Bidirectional throw pattern
Supply air unit,
Damper open
Sound attenuation, dB
Hz
Hood height
Spigot
125 250 500 1000 2000 4000
330 mm
ø 200
17
10
10
11
18
24
ø 160
24
8
5
12
17
24
ø 250
16
9
7
11
16
23
29.7.2015
540 mm
WWW.JEVEN.COM
All rights reserved