Blake`s Lotaburger #92

Transcription

Wells Fargo Bank Plaza
221 N. Kansas Street
Suite 820
El Paso, Texas 79901
(915) 613-4576
www.pwarch.com
Consultants
Issues / Revisions
No.
1
Date
7/16/15
Description
COORDINATION
Project
Blake's
Lotaburger #92
New Store
1600 W Valencia Rd
Tucson, AZ 85746
Drawing Name
TYPICAL DETAILS
Copyright (C) 2015 by PhiloWilke Partnership. All rights reserved.
This document and the information herein is the property of PhiloWilke Partnership. No part hereof
shall be copied, duplicated, distributed, disclosed or used to any extent whatsoever except as
expressly authorized by PhiloWilke Partnership. Any Person, firm, or corporation receiving this
document, however obtained, shall by virtue hereof, be deemed to have agreed to the forgoing
restrictions and that this document will be held in trust and confidence subject only to the private use
expressly authorized by PhiloWilke Partnership.
Print Date / Time:
P&W Commission Number
6/10/2015 10:59:09 AM
Sheet Number
S102
Sheet 6 of 16
Suite 820
(915) 613-4576
www.pwarch.com
FD
Consultants
FD
FD
FD
FD
Issues / Revisions
No.
1
Date
7/16/15
Description
COORDINATION
FD
FD
Project
Blake's
Lotaburger #92
New Store
1600 W Valencia Rd
Tucson, AZ 85746
Y:\E_DRIVE_CADD\2015 JOBS\PHILO WILKE PARTNERSHIP\BLAKE'S 92 (15207)\PLANS\S-111.DWG
Drawing Name
FOUNDATION PLAN
PN
Print Date / Time:
6/10/2015 10:59:09 AM
Sheet Number
S-111
FOUNDATION PLAN
1/4" = 1'-0"
1
Suite 820
(915) 613-4576
www.pwarch.com
Consultants
Issues / Revisions
No.
1
Date
7/16/15
Description
COORDINATION
Project
Blake's
Lotaburger #92
New Store
1600 W Valencia Rd
Tucson, AZ 85746
Y:\E_DRIVE_CADD\2015 JOBS\PHILO WILKE PARTNERSHIP\BLAKE'S 92 (15207)\PLANS\S-112.DWG
Drawing Name
ROOF FRAMING AND
ENLARGED CANOPY
FRAMING PLANS
PN
Print Date / Time:
6/10/2015 10:59:09 AM
Sheet Number
S-112
ROOF FRAMING PLAN
1/4" = 1'-0"
1
Suite 820
(915) 613-4576
www.pwarch.com
Consultants
Issues / Revisions
No.
1
Date
7/16/15
Description
COORDINATION
Project
Blake's
Lotaburger #92
New Store
1600 W Valencia Rd
Tucson, AZ 85746
Drawing Name
FOUNDATION DETAILS
Print Date / Time:
6/10/2015 10:59:09 AM
Sheet Number
S301
Sheet 6 of 16
Suite 820
(915) 613-4576
www.pwarch.com
Consultants
Issues / Revisions
No.
1
Date
7/16/15
Description
COORDINATION
Project
Blake's
Lotaburger #92
New Store
1600 W Valencia Rd
Tucson, AZ 85746
Drawing Name
FRAMING DETAILS
Print Date / Time:
6/10/2015 10:59:09 AM
Sheet Number
S401
Sheet 6 of 16
Suite 820
(915) 613-4576
www.pwarch.com
Consultants
Issues / Revisions
No.
1
Date
7/16/15
Description
COORDINATION
Project
Blake's
Lotaburger #92
New Store
1600 W Valencia Rd
Tucson, AZ 85746
Drawing Name
FRAMING DETAILS
Print Date / Time:
6/10/2015 10:59:09 AM
Sheet Number
S402
Sheet 6 of 16
AR
E
38175
ALVARO
LOYA
_
e
Dat
Si
34"
F
_
CE
I
RT
NO
REG
D A RC
ERE
H
I
ST
I CAT
CT
TE .
I
Suite 820
(915) 613-4576
www.pwarch.com
_
gne
d_ _ __
.A
I ZO
NA U . S
07/01/2015
.
Consultants
Structural Engineering
PK Associates LLC
7434 East McDonald Drive
Scottsdale, AZ 85250
480.922.8854
Mechanical and Plumbing Engineering
Burgess Engineering Services
2913 E. Desert Cove Av.
Phoenix, AZ 85028
602.482.0500
Electrical Engineering
EDA, Inc.
7536 N. La Cholla Bldv
Tucson, AZ 85741
520.622.2196
Longest path of travel lenght = 35' - 1"
Landscape Architects
34"
The Moore / Swick Partnership
414 S. Mill Avenue, Suite 207
Tempe, AZ 85281
480.894.9284
FS
FS
FS
FS
Issues / Revisions
travel
path of
Longest
40' - 3"
lenght =
No.
1
Date
07/16/2015
Description
Revision #1
FS
FS
FS
h of
lengh
t= 4
3' - 7
"
34"
Long
est p
at
Project
Longest path of lenght = 48' - 2"
Blake's
Lotaburger
#92
New Store
1600 W Valencia Rd
Tcson, AZ 85746
68"
Drawing Name
This document and the information herein is the property of PhiloWilke Partnership. No part
hereof shall be copied, duplicated, distributed, disclosed or used to any extent whatsoever except
as expressly authorized by PhiloWilke Partnership. Any Person, firm, or corporation receiving this
restrictions and that this document will be held in trust and confidence subject only to the private
use expressly authorized by PhiloWilke Partnership.
Legend - Fire Safety
XX"
C:\Users\bdiaz\Documents\215-018 Blakes Tucson 92_Complete_bdiaz.rvt
Fire Safety Plan
Building exit, clear exit width in inches
Wall mounted fire extinguisher location
PN
Print Date / Time:
Longest
travel= ---'
Path of longest exit travel
0
2
4
8
215-018R
Fire Safety Plan - First Floor
1/4" = 1'-0"
1
7/16/2015 2:16:16 PM
Sheet Number
G-110
Sheet 3 of 16
A-200
19
48' - 0"
1' - 2"
40' - 5"
6' - 5"
1
A-300
3' - 10"
3' - 4"
4' - 0"
3' - 4"
14' - 1"
3
21
26
A-320
A-320
12
HB
10"
B00
HB
B00
Suite 820
(915) 613-4576
www.pwarch.com
6' - 7 1/2"
12
4
A-300
7' - 4"
6' - 2"
19' - 3 1/4"
5
FD
REG
6
26
Si
A-320
4
AR
21
A-320
6
7' - 6"
18' - 0"
7' - 5"
2
5' - 0"
2' - 3"
1
9
4' - 0"
4' - 6"
4' - 8"
4
11"
3' - 10"
Align
2' - 6"
3' - 0"
1' - 7"
12' - 6"
3' - 7"
26
2' - 5"
4' - 0"
4
A2
Phoenix, AZ 85028
602.482.0500
7
2
FS
Tucson, AZ 85741
520.622.2196
9
2
1
1
EDA, Inc.
A-200
5
3 A-210
12
4
4
4
Tempe, AZ 85281
480.894.9284
6' - 6"
2"
0"
0"
7"
1'
FS
1' - 3"
B3
8 A-210
11
"
11 A-210
13
Issues / Revisions
4
12
FS
10 A-210
No.
1
11' - 2"
2 A-210
4"
Date
07/16/2015
Description
Revision #1
A00
26
26
A-320
3' - 4"
5' - 4"
'-6"
R1
7' - 10"
1'
-
0
FS
8"
2'
-
0"
1'
-
2'
-
2" x 8" Wood Stud
7' - 8"
5' - 2"
4' - 9"
5'
-
5A
-21
12
9 A-210
/4"
6 A-210
21
4
70' - 6"
2'
-
A-320
65' - 3"
31°
19' - 0"
Align
21
13
B3
R 10'8 1/2
"
69' - 8"
5' - 4"
2' - 0"
2' - 11"
7' - 3"
FS
FS
15' - 1 1/2"
A2
12
FS
65' - 3"
4
A-320
A-200
6' - 4 1/2"
.
J60x
FS
7' - 4"
4' - 1 1/2"
4"
FS
14' - 6"
.A
I ZO
NA U . S
07/01/2015
480.922.8854
FS
FS
1' - 4" 2' - 3 1/2"
4' - 8"
12' - 6"
5' - 2"
FS
_
gne
d_ _ __
PK Associates LLC
12
A2
Align
1' - 2"
46' - 1"
FS
38175
ALVARO
LOYA
7"
FS
E
6' - 8"
7"
8' - 0"
F
Consultants
25 A-111
B4
5' - 6"
3' - 9"
9' - 4"
1Hr. Fire Wall, see UL-U309
7"
11' - 10"
B3
10' - 6"
CE
5
I
RT
e
Dat
14' - 9"
FD
2" x 8" Wood stud
19' - 9"
12' - 1"
I
A-300
D A RC
ERE
H
I
ST
I CAT
NO
2
CT
TE .
2
_
11' - 0"
_
10"
8
typ.
A-320
13
4A
-21
A00
7 A-210
26
A-520
0
18
10"
"
' -6
R1
A-540
11
11
10
3' - 4"
3' - 8"
13
12
3
19' - 2"
EQ
6
6
A-320
A-320
8' - 4"
EQ
EQ
13' - 6"
19' - 2"
4' - 8"
EQ
J61x
10' - 2"
4
Project
to wood studs
EQ
EQ
U60x
HB
16
11
A-320
A-320
12
11
B3
16
6
A-320
A-320
B4
Blake's
Lotaburger
#92
A-320
2' - 0"
Align
2' - 0"
7' - 0"
HB
12
B3
B5
2
2
1
17
16
U60x
12
A-540
1' - 6"
A-540
2
A-320
12
EQ
4' - 4"
2' - 0"
2' - 0"
4' - 4"
EQ
10' - 8"
2' - 11"
6' - 10"
EQ
8' - 4"
1' - 6"
14' - 5"
EQ
1
2' - 0"
A-300
A-200
1' - 0"
4
41' - 4"
New Store
1600 W Valencia Rd
Tcson, AZ 85746
Dimension Plan - First Floor
1/4" = 1'-0"
16
First Floor - Architectural Plan
1/4" = 1'-0"
1
Drawing Name
Keyed Note Legend
5/8" Sheetrock ultralight
panels firecode X
1
2
3
Wood studs as per Structural
drawings
4
5
6
5/8" Sheetrock ultralight panels
firecode X
7
8
9
10
11
12
13
5/8" Sheetrock ultralight panels firecode X applied horizontally
or vertically to each side of wood studs 16" o.c. with 6D coated
nails, 1 7/8" long, 0.0915" shank, 1/4" heads, 7" o.c. at edges.
Joints of square edge, bevel edge or predecorated gypsum board
may be left exposed. Joints staggered 16" on opposite sides.
Contractor to provide stainless steel wall panels marked in plan
Contractor to provide stainless steel flanges around and behind griddles as
specified by owner
Add vision window panels and hardware as per Owner specifications to rear exit
door
Contractor to provide Fiberglass reinforced polyester white panels at kitchen
walls as marked in plan. Verify location with Architect prior to installation
Quarry tile to be provided under both units (cooler/freezer)
Adjust wall dimensions around cooler/freezer as necessary. Coordinate final
dimensions with Architect
Contractor to provide stainless steel trim to drive-thru window
Tile wall,OFCI
Contractor to install cement board at all kitchen walls, from finish floor to 1'-0" up
Emergency Exit only, provide panic hardware
Smoothed out, no texture. White semi-gloss paint, prepare to receive vinyl.
New R-19 Ecotouch pink fiberglas insulation to roof deck at all exterior walls
New R-11 EcoTouch pink fiberglas insulation to above ceiling in interior walls
around restrooms
General Notes - Floor Plan
Floor Plan and Dimension
Plan
Legend - Floor
1.
All new partitions are type "B2" unless noted otherwise. All walls at kitchen or facing the
kitchen will be constructed with Fiber Reinforced Polyester 1/2"plywood. All walls
outside of kitchen or facing dining area will be constructed with 5/8" gypsum board.
New Partitions
2.
All interior dimensions are to face of gypsum board or face of masonry unless noted
otherwise.
Door, frame and hardware provided by others
3.
See 1 A-520 for Partition Type Schedule.
New door, frame and hardware
4.
5.
6.
Verify all equipment dimensions, clearances, and rough-in requirements with
manufacturers prior to construction/installation.
FD
Floor Drain, see Plumbing drawings
For contractor installed items, contractor shall ensure all necessary power, structural
support, waste, water and other hook-ups and/or accessories shall be provided for
proper use of all equipment and accessories scheduled and/or installed.
FS
Floor Sink, see Plumbing drawings
Contractor is responsible for the painting, texturing on areas that do not take any
paneling, tile or FRP as specified by Owner.
HB
Hose Bibb, see Plumbing drawings
PN
7.
All walls facing the dining will be flush each other
8.
All Exterior dimensions are dimensioned to the exterior face of plywood . For exterior
finish dimensions refer to details and sections
Print Date / Time:
Note: See 12 G-100 for Standard Building Element Symbols not shown in this legend.
0
2
4
8
215-018R
UL-U309
1 1/2" = 1'-0"
25
7/16/2015 2:16:08 PM
Sheet Number
A-111
Sheet 6 of 16
Cotterman fixed steel ladder, model
F16W with security guard and landing
plataform. Provide shop drawings prior
to fabrication. Ladder to be painted
prior to installation, color to be
selected by owner.
Dryvit Outsulation Plus
MD System . Color to
be selected by owner
Wall pack lighting, see
Electrical drawings
Blake's Lotaburger side
elevation sign by others,
provide power, see Electrical
drawings
Reveal 1", typ.
Roof scupper opening,
typical
16
11
6
1
16
A-320
A-320
A-320
A-300
A-320
Blake's Lotagurber front
elevation sign by others,
provide power see
Electrical drawings
Curved base for
signage by others
EIFS Dryvit Outsulation
Plus MD System. Reflectit
Coating, color to be selected
by Owner
Firestone corrugated metal panel,
Delta CFP-16F, dark bronze batch or
approved manufacturer
25
Suite 820
(915) 613-4576
www.pwarch.com
3' - 4"
25' - 6"
Si
AR
2' - 8"
3' - 11"
20
A-540 typ.
A-300
A-320
Pre finished metal gutter
and downspot. Color to
be selected by Owner
14
New bike rack, color to be A-540
selected by Owner and
final location approval
21
A-320
South Elevation
1/4" = 1'-0"
Canyon Stone, Southern
Ledge style, Chardonay
color
1
A-300
19
_
gne
d_ _ __
.A
I ZO
NA U . S
07/01/2015
.
PK Associates LLC
4' - 8"
2' - 6"
3' - 0"
4' - 0"
4' - 0"
3' - 0"
2' - 6"
1
26
38175
ALVARO
LOYA
480.922.8854
Finished Floor
0' - 0"
Pre finished metal gutter
and downspot. Color to
E
Consultants
9' - 6"
9' - 6"
15
A-540
Reveal 1",
typ
Airplane cable railing system,
coordinate with Architect and
Owner prior to submit
shop drawings
REG
I
A-540
14' - 8"
13' - 8"
15' - 2"
12' - 0"
9' - 6"
A-540
1' - 7"
18' - 6"
14' - 8"
26
F
15' - 2"
22' - 0"
23' - 0"
22' - 0"
Reveal 1", typ.
26
I
RT
NO
26
A-540 typ.
Pre-manufactured metal
canopy by East Texas
Canopy or approved
manufacturer
D A RC
ERE
H
I
ST
I CAT
e
Dat
23' - 0"
EQ
CT
TE .
4' - 10"
Plus MD System. Color to
be selected by owner
EQ
Firestone corrugated metal
panel beyond, Delta CFP-16F,
dark bronze batch or approved
manufacturer
3' - 4"
A-520 typ.
Pre-manufacture metal
canopy by East Texas Canopy
or approved manufacturer
_
3' - 10"
_
2' - 1"
1' - 0"
Aluminum coping will
continue thru cut roof
ladder opening
EQ
CE
EQ
Plus MD System. Color
to be selected by owner
North Elevation
Phoenix, AZ 85028
602.482.0500
4
1/4" = 1'-0"
EDA, Inc.
Tucson, AZ 85741
520.622.2196
elevation sign by others, provide
power, see Electrical dawings
EIFS Dryvit Outsulation Plus
MD System. Color to be
selected by Owner
9
2
A-320
A-300
panel. Delta CFP-16F,dark bronze
batch color or approved
manufacturer
Tempe, AZ 85281
480.894.9284
selected by Owner
elevation by others, provide
power see Electrical drawings
Issues / Revisions
Blake's Lotaburger front
elevation sign by others, provide
power, see Electrical dawings
MD System. Reflectit
Coating Color to be selected
by Owner
Date
07/16/2015
Description
Revision #1
7' - 4"
No.
1
22
EQ
EQ
EQ
EQ
EQ
EQ
22' - 0"
8"
23' - 0"
25' - 6"
EQ EQ
18' - 0"
1' - 0"
3' - 4"
A-520 typ.
18' - 6"
26
20
12' - 0"
14' - 8"
18
K80
A-540
4' - 0"
2' - 9"
2' - 6"
4' - 0"
4' - 0"
8' - 0"
9' - 6"
A-540 typ.
2' - 6"
4' - 0"
13' - 8"
15' - 2"
A-540 typ.
Project
14
color
Reveal 1", typ.
A-540
Airplane cable railing system,
coordinate with Architect and
Owner prior to submit shop
drawings
26
2
6
A-320
A-320
2
A-320
A-300
East Elevation
2
21
A-300
A-320
Delta CFP-16F, Dark bronze batch
color or approved manufacturer
Corrugated metal panel,
beyond
Blake's lotaburger side elevation
sign by others, provide power
see Electrical drawings
1/4" = 1'-0"
2
Blake's
Lotaburger
#92
Blake's Lotaburger side elevation
sign by others, provide power see
Electrical drawings
Dryvit Outsulation Plus MD
System. Reflectit Coating, color
to be selected by Owner
color
System. Color to be
selected by owner
Blake's Lotaburger front elevation
sign by others, provide power see
Electrical drawings
New Store
3' - 4"
1600 W Valencia Rd
Tcson, AZ 85746
Drawing Name
EQ
EQ
EQ
EQ
Exterior Elevations
20
typ.
3' - 8"
12' - 0" typ.
A-520
13' - 8"
1' - 10"
typ.
15' - 2"
A-540
20' - 6"
26
22
A-540
2
A-300
26
Reveal 1", typ
A-320
11
A-320
4' - 0"
4' - 0"
3' - 0"
4' - 0"
EQ EQ
25' - 6"
EQ
22' - 0"
23' - 0"
EQ
Print Date / Time:
2
color
New bick rack , color to be
selected by Owner and final
location approval
A-320
215-018R
West Elevation
1/4" = 1'-0"
1
7/16/2015 2:16:09 PM
Sheet Number
A-200
Sheet 11 of 16
Continuous cleat, typical
Cant strip
21
Cant strip
Aluminum coping
Cant strip
#30 Felt underlayment
OH A-320
I
Si
AR
F
E
NO
I
RT
e
Dat
See Exterior Elevations
D A RC
ERE
H
I
ST
I CAT
CT
TE .
panel, Delta CFP-16F, dark
bronze batch or approved
manufacturer
38175
ALVARO
LOYA
_
Metal panel
Wood frame as
necessary
min
8"
Dryvit air/water resistive
barrier coating extended
Dryvit air/water resistive barrier
coating extended
REG
Aluminum flashing
_
Firestone corrugated
metal panel, Delta
CFP-16F, dark bronze
batch or approved
manufacturer
Suite 820
(915) 613-4576
www.pwarch.com
CE
22' - 0" AFF
Dryvit compatible sealant
with closed cell backer rod
and weep tubes every 2'
3' - 4"
1 1/2" Extended polysterene
insulation board. Dryvit
System
1/2" Fire treated plywood
Metal panel
Self-adhering vapor
barrier on 3/4" fire
treated plywood
Fiber cant strip
A-520
Aluminum coping
Aluminum coping
Varies
Aluminum coping
System. Reflectit Coating, color
Extended Polysterene
insulation board, Dryvit
System.
19
_
gne
d_ _ __
.A
I ZO
NA U . S
07/01/2015
.
Modified bitumen
with mineral surface
EIFS Dryvit Plus MD System.
Color to be selected by Owner
Roof deck, see
Structural
drawings
Roof deck, see Structural
drawings
and weep tubes every 2'
Aluminum flashing
2" x 8" Wood stud
2" x 6" Wood stud
Parapet beyond
23
Fiber cant strip
Self adhering vapor barrier
on 3/4" fire treated plywood
1/2" Approved
substrate
3" = 1'-0"
2" x 6" Wood stud
framing
24
OH
min
Roof deck, see
Structural drawings
1' - 0"
Wood stud framing size,
refer to wall sections
15' - 2"
480.922.8854
min
Fiber cant strip
PK Associates LLC
Aluminum flashing
1' - 0"
Self-adhering vapor
barrier on fire treated
blocking
Termination at Parapet - Cap Flashing Final
Consultants
Phoenix, AZ 85028
602.482.0500
A-520
Parapet flashing
beyond
Modified bitumen with
mineral surface
EDA, Inc.
Tucson, AZ 85741
520.622.2196
18
A-520
drawings
2" x 6" Wood stud framing
Alumnim coping
Note: Coordinate with manufacturer's
installation requirements
Roof deck, see
Structural drawings
25' - 6"
Aluminum coping
Tempe, AZ 85281
480.894.9284
Structural framing, see
Sttructural drawings
Termination at Parapet with Corrugated Metal Panel - Cap
Flashing
EIFS Dryvit Plus MD
System. Color to be selected
by Owner
1 1/2" = 1'-0"
19
Parapet
14
1 1/2" = 1'-0"
Section 9
9
3/4" = 1'-0"
Metal panel
Issues / Revisions
Description
Revision #1
8"
min
Varies
Date
07/16/2015
3' - 4"
3' - 4"
2" x 8" Wood stud at 16" o.c.
see Structural drawings
3' - 4"
drawings
Roof deck, see
Structural drawings
min.
drawings
drawings
8"
Varies
No.
1
Roof deck, see
Structural drawings
19
A-320
24
A-320
24
24
A-320
A-320
panel, Delta CFP-16F dark
bronze batch or approved
manufacturer
Plus MD Syctem. Color to
22' - 0"
23' - 0"
Varies
Project
1/2" Exterior sheating
Scheduled ceiling
Scheduled ceiling
2" x 6" Wood stud framing
6"
26
Concrete slab, see
Structural drawings
1/2" Plywood
Fiber reinforced
polyester on 1/2"
plywood
5/8" Painted gypsum board
Wood stud framing
at 16" o.c. see Structural
drawings
Foundation, see Structural
drawings
Foundation, see
Structural drawings
New Store
1600 W Valencia Rd
Tcson, AZ 85746
10' - 0"
Varies
Varies
Varies
drawings
Section 2
New R-19 EcoTouch
pink fiberglas insulation
insulation to roof deck
OH A-540
4' - 0"
5/8" Painted gypsum board
2" x 4" Wood stud, at 16" o.c.
3/4" = 1'-0"
2
Drawing Name
Wall Sections
20
1/2" Approved substrate
Concrete slab, see Structural
drawings
Scheduled ceiling
New R-19 Ecotouch pink fiberglas
color
2" x 6" Wood stud, at 16" o.c.
See Dimension
Plan
A-520
3/4"
min
selected by Owner
24
4' - 0"
A-520
2" x 6" u.n.o. wood stud @16"
o.c. see Dimension plan for
wood stud size location
Varies
4' - 0"
A-520
5/8" gypsum board or fiber
reinforced polyester on
1/2" plywood
27
1/2 Approved substrate
23
and wheep tube every
24". By others
1 1/2" Extended polystyrene
insulation board, Dryvit System
15
New R-19 Ecotouch pink
fiberglas insulation to roof
deck
18' - 6"
Dryvit air/waterresistive barrier coating
extended
fiberglas insulation to
roof deck
A-520
1 1/2"Extended
Polystyrene insulation
board, Dryvit System
10' - 0"
selected by Owner
EIFS Dryvit Outsulation Plus MD
System. Color to be selected by
Owner
Wood frame structure
as necessary
color
15' - 2"
15' - 2"
Scheduled ceiling
15' - 2"
Scheduled ceiling
MD system. Color to be
selected by Owner
1 1/2"Extended
Polystyrene insulation
board, Dryvit System
18' - 6"
18' - 6"
OH A-540
Blake's
Lotaburger
#92
color
2" x 4" Wood stud at 16"
o.c. See Structural
drawings
2" x 6" wood stud, at 16" o.c.
2" x 6" Wood stud at
16" o.c. See Structural
drawings
Concrete slab, see
Structural drawings
Slab and foundation,
drawings
drawings
Print Date / Time:
215-018R
Section 5
3/4" = 1'-0"
26
Typical Section Wall
3/4" = 1'-0"
21
Section 8
3/4" = 1'-0"
16
Section 1
3/4" = 1'-0"
11
Wall Section thru window
3/4" = 1'-0"
6
7/16/2015 2:16:11 PM
Sheet Number
A-320
Sheet 14 of 16
Bonding adhesive
Rubbergard EPDM Membrane
Lower priority partition
Continuous bead of lap sealant
2'-0" minimum
Quickprime plus, typ.
Plus MD System. color to
5" Quickseam flashing centered
over edge of scupper flange
Non welded metal
scupper sleeve
Dryvit detail mesh embedded
in Dryvit base coat. Overlap
reinforcing mesh (2 1/2")
on wood stud framing
2"
Appropiate
bonding adhesive
Aesthetic Reveal
1 1/2" Extended
Polysterene
Continuous flashing,
Note:
1-hour fire wall:
Priority 4
Non-rated wall:
Priority 5 (Lowest)
For all one hour rated partitions, two hour rated partitions and smoke
partitions, the surface area of individual metallic outlet or switch boxes
shall not exceed 100 square inches per 100 square feet. Boxes located
on opposite sides of rated fire or smoke partitions shall be separated
by a horizontal distance of 24 inches minimum.
15
Wall Priority Legend
N.T.S.
10
New partition
Outlets shall not be
placed back to back
or in same stud cavity
4" min.
Wall perpendicular to deck flutes
2" x 6" u.n.o. wood stud
framing, see Dimension plan
for size location
Galvanized metal lath
5/8" Painted gypsum
board on wood stud
framing
Wood studs framing, see
Wall Sections for size
Plan Detail A
Typical Condition at Acoustical Partitions
Plan Detail B
Typical Condition Between New and Existing Partitions
Fire tape or
sealant at
penetration
Fill flutes w/ fire-safing
insulation
Align
Wood studs, see schedule for
size, and spacing
See Partition
Fiber cant strip
min
Schedule
Modified bitumen
with mineral surface
8"
fiberglas insulation to
roof deck
Roof deck, see
Structural drawings
24
N.T.S.
.
PK Associates LLC
480.922.8854
Phoenix, AZ 85028
602.482.0500
EDA, Inc.
Shim as required,
remove existing corner
beads, tape and float
flush
Tucson, AZ 85741
520.622.2196
Provide sheet metal support
strip or screw to deck at
12" o.c.. Match deck gauge
(26 ga. min. for 1 hr. wall)
5/8" gypsum board on one or
both sides of studs according to
Partition Schedule (Type X where
partition is fire-rated). See Partition
Schedule for General Notes.
1 1/2" sound attenuation blankets
at sound-rated partitions. See
Partition Schedule for General Notes.
Partition at Ceiling
.A
I ZO
NA U . S
07/01/2015
New partition
Self-adhering vapor
barrier on 3/4" fire
treated plywood
_
gne
d_ _ __
Sched. ceiling
w/ closed cell backer rod
and weep tubes every 2'.
Water resistant barrier
38175
ALVARO
LOYA
Gypsum board partition,
see schedule
Fiber reinforced polyester on 1/2" plywood.
See Floor Plan for location
E
Consultants
Remove existing corner
bead, tape and float
flush
Existing partition
Align
F
5
N.T.S.
Where insulation is required,
extend tight against top
runner
Brace top track to structure at
4'-0" o.c.
I
RT
Si
Metallic Boxes in Smoke and Fire-Rated Walls
Fill flutes with fire-safing
insulation. At non-rated
walls, fill flutes with sound
attenuation insulation
D A RC
ERE
H
I
ST
I CAT
AR
Cut gyp. bd. to flute profile
and fit tight against deck
Scratch coat
See Exterior
Elevations
Priority 3
UL approved fire sealant system,
See specifications
color
Mortar
3" = 1'-0"
1-hour fire and smoke barrier wall:
Electrical, voice, or data outlets
1/2"approved substrate
Horizontal Joint at Stone Veneer
Priority 2
Continuous 3" sound attenuation
blankets 2'-0" each side of partition
where partition sound attenuation
occurs below suspended ceiling
Dryvit demandit or
color prime on surface
to receive sealant
3/4"
min
3" = 1'-0"
Varies
25
2-hour fire wall:
MD System.
Color to be selected by Owner
3" = 1'-0"
Priority 1 (Highest)
NO
Structural deck, see
Structural drawings
2-hour fire and smoke barrier wall:
e
Dat
1 1/2" Extended Polysterene
insulation board, Dryvit
System.
Two layers 5/8" Type "X" gypsum board
for 2 hr. rated fire or 2 hr. fire and smoke
wall (only one layer each side at one hour
rated fire or one hour smoke wall).
CT
TE .
Fiber reiforced polyester on
1/2" plywood or 5/8"
gypsum board on wood stud
framing
Insulation
Scupper and Downspot Detail
Wall Priority Legend
Aluminum coping
_
Rubbergard
EPDM
Membrane
_
Wood nailer
Max. 16 sq. in. opening in
rated or smoke wall
I
Quickseam joint
cover as corner
flashing
1"
8"
Pre-finished metal gutter and
downspout where applies, see
Plans. Color to be selected by
Owner.
Suite 820
(915) 613-4576
www.pwarch.com
Telephone, elect. boxes etc.
Dryvit air/water-resistive
2"
1 1/4" hot dipped galvanized roof
nails 4" o.c. max
Slotted metal gravel stop
1 1/2" Extended Polysterene
insulation board,
Dryvit System
Cant strip
REG
9" Quickseam formflash centered
over 5" quickseam flahing at base
of scupper only
CE
Continuous bead waterblock
Continuous bead ap sealant or
high-grade urethane sealant
Seal boxes tight with
joint compound
Higher priority partition
UL approved fire sealant system,
See specifications
Gypsum board partition,
see schedule
Wall parallel to deck flutes
14
Duct, piping,
conduit, or other
wall penetration
Gypsum Board Partitions at Fluted Metal Deck
N.T.S.
Existing partition
Plan Detail D
Plan Detail C
Typical Condition at Acoustical Partitions
9
Tempe, AZ 85281
480.894.9284
Align
Typical Condition Between New and Existing Partitions
Typical Partition Details
4
N.T.S.
1/2" Fire treated
plywood
Wood frame structure
Aluminum flashing
1/2" min.
Issues / Revisions
Delta CFP-16F,dark bronze batch or
approved manufacturer on 1/2" fire
treated plywood
Fasteners at 20" o.c. max
Dryvit demandit or
color prime on surface
to receive sealant
External bracing above ceiling
at 4'-0" o.c. if wall exceeds
maximum limiting height per
SSMA Product Technical
Information. Secure to structure.
Fill voids, see
schedule for
General Notes
Cont. metal stud whaler attached to
each stud
Varies see
Exterior elevations
Design
Diagram
size and spacing
Fiber reinforced
polyester on 1/2"
plywood
Special channel; 4" end laps
with continuous caulk at laps
Continuous bead of caulk and
backer rod
See Partition
Horizontal Joint at Corrugated Metal Panel
3" = 1'-0"
Schedule
23
Parapet, Typical
3" = 1'-0"
12" - 24"
EIFS Dryvit Outsulation MD Plus
System. Color to be selected by
Owner
1 1/2" Extended
Polysterene
1/2" approved substrate
18
N.T.S.
Floor
D
Partition
to Structure
Partition
Partition
to Underside of Braced Above (see Schedule for
Finished Ceiling Finished Ceiling
fire ratings)
Type
Mark
See Partition Schedule
D) Transition Strip at Resilient flooring/Ceramic tile
Seamless flooring
1" wide resilient transition
strip where dissimilar
flooring materials meet.
See Finish Schedule.
C
E
F
G
Partition
to Structure
(2-Hour)
Shaft Wall
(1-Hour)
Shaft Wall
(2-Hour)
H
J
K
L
M
N
P
Q
S
R
T
V
W
X
Chase Wall
Chase Wall Gyp. Bd. One Side
to Structure
to Structure One Only, Braced
Side Only
Above Fin. Ceiling
(see Schedule for fire ratings and width)
Typical
Furring
Non-Load
CMU with
CMU with
Bearing CMU Furring One Side Furring Both Sides
(see Schedule for(see Schedule for(see Schedule for
fire rating)
fire rating)
fire rating)
Project
Partition Type Schedule
Continuous bead of caulk
and backer rod
2" x 6" Wood studs framing
B
Resilient flooring, feather
to adjacent floor height
Ceramic tile
selected by Owner
A
13
Metal strip transition
where dissimilar flooring
materials meet
Fiber reinforced polyester
on 1/2 Plywood or 5/8"
gypsum board
Dryvit aquaflash system
or Dryvit backstop nttexture over grid tape
Wood stud framing,
see Wall Sections for size
3
Ceiling
Partition at Ceiling/Structural Deck
Description
Revision #1
Structure
5/8" gypsum board (Type X where
Date
07/16/2015
PARTITION TYPE LEGEND (Not all types occur in Project)
fiberglas insulation to roof
deck
Soffit angle, 4" end laps with
continuous caulk at laps
See Exterior
Elevations
Labeling for Smoke and Fire Walls
Sched. ceiling
2"x6" wood stud
No.
1
X-HOUR
FIRE AND SMOKE BARRIER
PROTECT ALL OPENINGS
Paint the following identification above the ceiling, at four-foot intervals, on both sides of
all fire-rated walls, demising walls, area separation walls, and smoke compartment walls.
Typeface shall be in 2" high letters in bright orange or red paint. Substitute the the hourrating of the partition for the letter "X" shown below. Omit the words "AND SMOKE" for
partitions that are fire barriers only. Stenciling is acceptable:
Attachment to deck
at 2'-0" o.c.
Deflection track with 2" legs or
attach studs to track with 1/2"
slip-joints
Sealant,
see General
Notes
Continuous bead of caulk
and backer rod
Aluminum flashing
Structural deck
A2
B2
B3
B4
B5
Description
Wood stud framing. Corrugated Metal Panel
Partition to structure (non-rated)
One-sided partition to 4" above ceiling
One-sided partition to 4" above ceiling
Fire Rating
Stud/
Block
Stud Limiting
Design
Section
Thickness Size Spacing Height Rating No. STC at Floor
5"
4 3/4"
4 3/4"
6 3/4"
4 1/8"
6 1/8"
3 1/2"
3 1/2"
3 1/2"
5 1/2"
3 1/2"
5 1/2"
1' - 4"
1' - 4"
1' - 4"
1' - 4"
1' - 4"
11' - 3"
11' - 3"
11' - 3"
11' - 3"
11' - 3"
-
-
40
40
40
40
40
11 A-520
11 A-520
11 A-520
11 A-520
11 A-520
Details
Ceiling/ Design
Plan Structure Test
12 A-520
12 A-520
12 A-520
12 A-520
12 A-520
13 A-520
13 A-520
13 A-520
13 A-520
13 A-520
Blake's
Lotaburger
#92
Notes
-
size, and spacing
Fiber reinforced polyester on
1/2" plywood. See Floor Plan for
location
Seamless flooring
New Store
Dryvit drainage track set
in Dryvit AP adhesive
1600 W Valencia Rd
Tcson, AZ 85746
C) Transition Strip at VCT/Sheet Vinyl flooring
Termination at Concrete Curb
Dryvit EIFS
3" = 1'-0"
27
Jamb Detail at Corrugated Metal and EIFS - Plan view
22
Partition Detail
2" x 8" Wood Stud
N.T.S.
12
Vinyl Composition Tile
Anchoring system (eye hook
drilled into wood head joint of
coping with S.S. pin crilled into
coping stone
Rake coping head joints to 3/8"
depth, install bond-break tape
and sealant, at every third head
joint, leave clear of mortar,
install backer rod and sealant to
form movement joint
See Dimension
Plan
See Dimension
Plan
System
3" = 1'-0"
Drawing Name
Carpet tile
. See Partition Schedule
Sealant and backrod
B) Transition Strip at VCT/Carpet tile
Stainless steel drip
edge
1/2" Approved
substrate
Weather resistant
barrier (2 layers)
3.4 Galvanized
metal lath
Stcratch coat
Mortar
1 1/2"
5/8" Painted gypsum
board
Vinyl Composition Tile
General Notes
1.
2.
3.
Attachment to floor or structure
at 2'-0" o.c. and ends
4.
Seamless flooring
Canyon Stone,
Southern Ledge style,
Chardonay color
New R-19 Ecotouch
pink fiberglas
Fiber reinforced polyester on 1/2" plywood.
See Floor Plan for location
size,and spacing
Acoustical sealant. Where partition is
fire-rated, seal partition as required
for fire rating.
5.
Outside
Building
Dryvit
2" x 4" wood stud
2" x 6" wood stud
A) Transition Strip at VCT/Seamless flooring
System
Wall Intersection 2 - Plan View
Floor or structure
1' - 6"
3" = 1'-0"
26
Stone Cap at Stone Veneer
1 1/2" = 1'-0"
21
Floor Transition Details
6" = 1'-0"
16
Partition at Floor
N.T.S.
11
All interior partitions are Type B2 unless noted otherwise.
Allowable deflection for all partitions shall be L/240 with a horizontal load of 5 psf. except as noted in
individual partition types. The Contractor shall decrease the stud spacing or increase the stud thickness
noted to insure partitions forming the substrate for brittle finishes such as ceramic tile meet an
allowable deflection criteria of L/360 with a horizontal load of 5 psf.
Where partitions are noted to be fire-rated:
a. Provide 5/8" Type X fire-resistive gypsum board.
b. Where partitions meet fluted metal deck or similarly irregular surfaces, seal the partition with safing
insulation and sealant as shown in detail 9 A-520 and in accordance with the reference design.
Sound-Rated Partitions:
a. Sound-rated partitions and partitions with thermal insulation are indicated with a the suffix "S"
(Example: A1S). Refer to the floor plans for locations.
b. Provide 1-1/2" thick, glass-fiber sound attenuation blankets unless noted otherwise.
c. Fill all deck voids or similarly irregular surfaces, with insulation and sealant as shown in detail
9 A-520.
d. Seal partition perimeter and all penetrations with acoustical sealant or tape and insulation to fill
voids.
e. Arrange back-boxes for electrical, data, telephone, and other outlets as shown in detail 4 A-520.
f. Where sound-rated partitions are also fire-rated, seal partition and fill voids as required for fire
rating.
Nails shall comply with ASTM F 547 or ASTM C514. Screws shall meet the requirements of ASTM C 1002
or ASTM C 954.
6.
7.
8.
9.
10.
11.
12.
13.
Unless otherwise required by reference designs for fire-rated partitions, fasteners shall be spaced 8" o.c.
along at vertical joints and 12" o.c. at floor and ceiling runners and intermediate studs. Space all
fasteners in panels that are substrates for brittle finishes, such as ceramic tile or stone, a maximum of 8"
o.c..
Joints in multi-layer gypsum board partitions shall be staggered 24" on each side and on opposite sides.
Metallic outlet boxes shall be permitted to be installed in walls or partitions classified as having a fireresistance of two-hours or less. The surface area of individual boxes shall not exceed 16 square inches.
The aggregate surface area of the boxes shall not exceed 100 square inches in any 100 square feet. Boxes
located on opposite sides of walls or partitions shall be separated by a minimum horizontal distance of 24
inches. See detail 5 A-520.
Fiberglass-mat faced, siliconized gypsum-core boards shall be installed over or as part of the fireresistance rated system in shower and tub areas to receive brittle finishes such as ceramic tile or plastic
finished wall panels. When fire or sound ratings are indicated, the gypsum board required for the rating
shall extend down to the floor behind fixtures.
Label all fire-rated and smoke compartment walls or partitions above finished ceiling as shown on detail
3 A-520.
Install penetration seals at all penetrations through fire-rated and smoke compartment walls or partitions
in accordance with Specifications Section 07 84 00. See details 16, 17, 19, 21, 23, 26, and 28 G-102 for
reference designs of penetration seal systems based upon the penetrating element.
Accurately align new and existing partitions in the same plane when shown on the Floor Plans. See detail
4 A-520.
Maintain the fire or sound rating of partitions at all intersections. Maintain the construction of the highest
rated partition where partitions of two different ratings meet. See the Wall Priority Legend - detail
10 A-520.
Partition Type Legend and Schedule
1
Partition Types, Interior
and Exterior Construction
Details
Print Date / Time:
215-018R
7/16/2015 2:16:15 PM
Sheet Number
A-520
Sheet 15 of 16

Blake`s Lotaburger #92

Transcription

Similar documents

StratoTone

Cleaning and Restoration of EIFS

hafeilobopartsmanual

Specialty Finishes Brochure - Continuous Insulation

2580 sq ft rambler Dryvit and stone detail Seamless steel siding 12 ft

Sensation ADA Deck Plan

Sensation Deck Plan PDF

Al Shaqab - polskiearaby.com

From: Chris Arden [mailto:[email protected]

Alex Wiedenhoeft - FLA 2016

mis–architecture mis-architecture.co.uk

Borsdane Wood

Cost effective. - Dryvit | External Wall Insulation

Dryvit catalogue - Tri

Beware of another landslide!

SLIK: Scalable Low-Latency Indexes for a Key