Wire Rope Hand book

WIRE ROPE
HAND BOOK
Corporate Office
USHA MARTIN LIMITED
2A, Shakespeare Sarani, ‘Mangal Kalash’, Kolkata – 700071
Phone: +91 33 3980 0300, Fax: +91 33 2282 9029/ 3980 0500
Email: [email protected]
CIN: L31400WB1986PLC091621
ushamartin.com
FOREWORD
Usha Martin Limited is a Speciality
Steel and Steel product focused
group with diverse product range
in both steel as well as wire rope.
It is one of the largest wire rope
manufacturer in the world. It is
also the only wire rope company
in the world that has a totally
integrated business model to
convert iron-ore into steel wire
ropes as well as build its own wiredrawing and rope-making
machinery.
The steel wire ropes ranges from
1.5 mm to 140mm in size, 1370 to
2160 N/mm2 in grade and
encompassing all constructions
and all configurations like NonCompacted, Compacted,
Plasticated, Flattened Strand,
Locked Coil ropes and slings.
Usha Martin ropes conforms to all
specifications in the world, viz.
ISO, DIN, BS, IS, API, EN, AS, GOST,
JIS and approved by all leading
organisations, viz. ABS, API, DNV,
LLOYDS, NKK.
Usha Martin’s rope works is one
of the cleanest in the world
accreditated with TPM excellence
award from Japan Institute of
Plant Maintenance.
It is one of the very few companies
that has approval by OTIS for its
worldwide Elevator rope supply.
Usha Martin Steel wire ropes finds
place in every corner of the Globe
and has presence in almost all
application of ropes.
No part of this Book may be reproduced, scanned,
stored in a retrieval system or transmitted in any form
or by any means, electronic, mechanical, photocopying,
recording or otherwise, or reproduced on or by any
disc, tape, perforated media or any other storage
device or method without the permission in writing
from Usha Martin Limited.
01
Ram Jhula pix
WIRE ROPE BASICS
03
WIRE ROPE
COMPONENTS
ROPE SIZE
WIRE
STRAND
CORE
STRAND
CORRECT
CORE
WIRES
Measure the circle just touching the extreme outer
limits (crown) of the strands.
KING WIRE
WIRE ROPE
INCORRECT
05
FUNDAMENTAL
CONSTRUCTIONS
FUNDAMENTAL
CONSTRUCTIONS
CROSS LAY
Inner layer having half the number of
wires as the outer layer
FILLER WIRE
Small filler wires, equal in number to
the inner layer, are laid in the valleys
of the inner layer.
EQUAL LAY
One diameter of wire in the inner layer.
Two diameters of wire alternating large
and small in the outer layer.
Single-Wire centre with six
wiresof the same diameter.
WARRINGTON
SINGLE LAYER
The large outer-layer wires rest in the
valleys and the smaller ones on the crowns
of the inner layer.
Equal number of wires in each layer.
All wires in each layer are of
the same diameter.
SEALE
Combination of above constructions.
Eg Seale-Filler, Warrington-Seale etc.
Large outer wires rest in the valley
between the small inner wires.
COMBINED
07
LAY
Direction of Wire
& Strand Helix
IDEAL PULLEY
GROOVE
Greater contact area between the
rope and the pulley reduces abrasion
and enhances service life.
WRONG
RIGHT HAND REGULAR LAY (RHRL/RHO/sZ)
LEFT HAND REGULAR LAY (LHRL/LHO/zS)
Sheave groove too narrow
WRONG
RIGHT HAND LANGS LAY (RHLL/RHL/zZ)
Sheave groove too wide
LEFT HAND LANGS LAY (LHLL/LHL/sS)
RIGHT
ALTERNATE LAY (COMBINATION OF LANGS & REGULAR)
Sheave groove correctly supporting
the rope for 33% of its
circumference
SPECIAL ALTERNATE LAY (2 LANGS 1 REGULAR)
09
PULLEY/ROPE
BENDING RATIO
(D/d RATIO)
SHEAVE OR DRUM/ROPE
DIAMETER RATIO (D:d)
Sl.
No.
Sheave Dia (D)
Rope Dia (d)
Note:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Construction
6x7 (6-1)
6x19S (9-9-1)
6x26SW (10-5+5-5-1)
6x25F (12-6F-6-1)
6x31SW (12-6+6-6-1)
6x37SF (12-12-6F-6-1)
6x36SW (14-7+7-7-1)
6x43SF (14-14-7F-7-1)
6x50SFS (14-14-7F-7-7-1)
6x41SW (16-8+8-8-1)
6x49SW (16-8+8-8-8-1)
6x49SF (16+16+8F-8-1)
6x46SW (18-9+9-9-1)
6x52SW (18-9+9-9/6-1)
6x55SF (18-18-9F-9/6-1)
8x19S (9-9-1)
8x26SW (10-5+5-5-1)
8x25F (12-6F-6-1)
8x31SW (12-6+6-6-1)
8x37SF (12-12-6F-6-1)
8x36SW (14-7+7-7-1)
8x50SFS (14-14-7F-7-7-1)
17x7 (11:6-1)
18x7 (12:6-FC)
19x7 (12:6-1)
34x7 (17:11/6-FC)
35x7 (16:6+6-6-1)
6x25FS (12/12/ )
6x8FS (7/ )
6x28FS (15/12/ )
Locked Coil Winding Rope
D : d Ratio
Recommended
Minimum
53
40
37
32
32
32
28
28
28
25
25
25
22
22
23
33
30
26
26
26
23
23
34
32
32
24
25
42
63
36
152
43
32
29
26
26
26
22
22
22
20
20
20
18
18
18
26
24
21
21
21
18
18
27
25
25
19
20
35
53
30
100
The ratios are based on Max. rope speed of 60 meters/ min. For each
increase of 30 mtrs/min. in excess of 60 meters per min., add 5% to
the drum diameter.
11
FLEET ANGLE
SPOOLING/ANCHORAGE
OF ROPE ON DRUM
Ropes are supplied with zero
internal torque
Improper spooling induces torque in
rope, reducing the rope life.
A
Angle
of Fleet
L
B
R
OVERWIND
Left to Right
USE RIGHT LAY ROPE
Centre line
of Reel
C
L
R
UNDERWIND
Right to Left
USE RIGHT LAY ROPE
D
L
R
L
R
Centre Line
of Sheave
OVERWIND
Right to Left
USE LEFT LAY ROPE
UNDERWIND
Left to Right
USE LEFT LAY ROPE
Note:
Recommended angle
O
Grooved drum : a £ 2.5
O
O
Flat drum : 0.5 £ a £ 1.5
13
ROPE CUTTING
PROCEDURE
ROPE CLAMPING
Seizing
Twisting
Cutting
The Right Way to Clip Wire Rope
The Wrong Way to Clip Wire Rope
Note:
Seizing wire recommendation
for ungalvanised rope – use annealed wire
for galvanised rope – use soft, zinc-coated wire.
Diameter of wire:
8 - 24 mm = 1 mm
26 - 36 mm = 1.6 mm
38 - 56 mm = 2 mm
Recommended seizing length = 1 x d min or 10 wraps
Note:
Improper fixing of clamps may lead to safety hazards.
For proper clamping practice, refer applicable standard
or OEM recommendations.
15
IN-USE
LUBRICATION
IN-USE
LUBRICATION
Usha Martin Ropes are supplied with
special lubricant
Periodic Lubrication during usage is
necessary to derive enhanced
performance.
PAINTING
CONTINUOUS BATH
SPRAY NOZZLE
DRIPPING
As Manufactured + In-service Lube
140%
As Manufactured
100%
Life Enhancement
In-use lubrication pays rich dividend
POURING
SWABBING
17
HANDLING –
THE RIGHT WAY
STORAGE
Must be stored in a well ventilated shed.
Free from moisture, dust and fumes.
Use spindle through the reels for
loading/unloading or put the rope on
a swift with brake arrangement.
Suitable lubricant to be applied every
3 months to the outer layers.
Allow clearance for free rotation of reel when
the rope end is pulled.
Reel containing ropes to be rolled through
90 degree after every 3 months
Maintain constant tension during haul off.
Protect wooden reels from the attack of
termites.
In no case the reels should be put on ground
or uncemented floor.
Prevent crossing of rope laps on the reel.
Avoid possible kink, which is a permanent
damage to a rope.
COVER / SHED
GROUND CLEARANCE
19
HANDLING
THE RIGHT WAY
WIRE ROPE
CHARACTERISTICS
BEND FATIGUE
ABRASION RESISTANCE
Rope resistance to abrasion
Rope resistance to bending
6
9
LE
AS
T
10
RE
12
SI
ST
AN
CE
12
12
14
16
18
LE
T
AS
R
I
ES
AN
ST
TO
CE
BE
TO
AB
ND
IN
G
S
RA
FA
TIG
IO
N
GR
TE
EA
ST
6x7
6 x 19S
6 x 21F
Flattened
Strand
6 x 25FW
UE
6 x 31WS
GR
EA
TE
6 x 36WS
ST
6 x 49WS
6 x 61WS
More wires – better fatigue resistance
Less wires – better abrasion resistance
21
WIRE ROPE
CHARACTERISTICS
WIRE ROPE
CHARACTERISTICS
COMMONLY USED
NON-COMPACTED ROPES
CHARACTERISTICS
COMPARISON OF
ROTATION RESISTANCE
More wires in the outer strand (14 for 36WS)
will improve bend fatigue
6 x 19 Class
Rotation
(deg/m)
Less wires in the outer strands (9 for 19S)
improve wear/abrasion resistance
characteristics
8 x 19 Class
Steel core (IWRC) resists drum crushing
better than fibre core
Hyflex & Powerform18
Hyflex & Powerform 35
Langs lay resists interference at drum better
than ordinary lay
0
Rope Tension
15%
x MBL
20%
x MBL
Abrasion Resistance
Comparison of outer wire sizes for 25 mm diameter rope,
as illustration
6 outer wires
2.54mm
6 x 19S
9 outer wires
2.11mm
6 x 25F
12 outer wires
1.70mm
6 x 36
14 outer wires
1.49mm
6 x 41
16 outer wires
1.34mm
Parallel closed ropes (eg. Powerform 8PC)
Turn
6x7
6/8 strand ropes (eg. Hyflex 6)
Low rotation ropes (eg. Hyflex 18)
Rotation resistant ropes
(eg. Powerform 35)
Load
23
WIRE ROPE
CHARACTERISTICS
WIRE ROPE
CHARACTERISTICS
COMPACTED ROPES
CHARACTERISTICS
High Abrasion Resistance
Increased breaking force
Internal
Contacts
Increased performance
Improved characteristics
Improved wear resistance
Conventional
External
Contacts
Line Contact
Improved crushing resistance
Improved Bend Fatigue resistance
Compacted
Surface Contact
High Crushing Resistance
At cross-over points due to
high fill -factor
High Breaking Load per unit area
At lower layers in multilayer
operation
Compacted rope
minimum breaking
force
Conventional rope
minimum
breaking force
Greater bend fatigue resistance
20mm Hyflex (conventional) versus
20mm Powerform 6 1960 N/mm2
375
300
225
150
75
0
279
kN
Hyflex 6
335
kN
Powerform 6
Cycles to failure
20mm Hyflex (conventional) versus 20mm
Powerform 6 1960 N/mm2
200000
150000
100000
146000
70000
50000
0
Hyflex 6
Powerform 6
25
WIRE ROPE
CHARACTERISTICS
WIRE ROPE
CHARACTERISTICS
PLASTICATED ROPE
CHARACTERISTICS
(Cushion Core – Compacted
outer strands)
PLASTICATED ROPE
CHARACTERISTICS
(Plastic Valley Filled)
Full plastic impregnation
Plastic impregnation of core (IWRC)
Reduces wire contact stress
& interstrand nicking
Greater resistance to drum crushing
Retains lubrication inside & does not require
in-service lubrication
Increased abrasion resistance
Smoother exteriors and greater surface
area resulting in reduced sheave wear
Prevents ingress of solid abrasives & reduces
internal corrosion
Reduced IWRC and outer-strand
nicking & crosscutting
Provides greater and better wear
& abrasion resistance
High fatigue life
Minimizes bend stress over sheaves and
increases fatigue life
Ideally suitable for mining application
Typical Example
Impregnation
of IWRC
Typical Example
Full Impregnation
of the rope
Comparison of bend fatigue illustration
250
Cycles to failure (000's)
Rope failure
Discard level
20
Comparison of service life (mining application)
150
Plastic
Valley-Filled
8P
HYFLEX 6x19
Fatigue Life
0
HYFLEX 6x29Fi
HYFLEX 6x36
(compacted strands)
HYFLEX 8P
POWERFORM
50
POWERFORM
6
250
100
175%
Compacted
Rope
100%
Normal
Rope
Note:
Our suffix is ‘P’
Colour of plastication is indicated in orange
PVF
Compacted
(6/8 outer strands)
Non-compacted
27
TYPES OF TYPICAL
FAILURES
TERMINATION FAILURE
TYPES OF TYPICAL
FAILURES
SHOCK LOADING
ABRASION
FATIGUE FAILURE
THERMAL DAMAGE
CORROSION
BIRDCAGE
29
GENERAL DISCARD
CRITERIA –
CRANE ROPES
Rope diameter reduction >7% of NRD, only due to
external wear.
Rope diameter reduction >3% of NRD for rotation resistant
ropes and >10% for other ropes due reasons other than
external wear.
For single layer (6 and 8-strand) and parallel-closed ropes
if number of visible broken wires exceed 4% of total load
bearing wires in all outer stands of the rope, over a length
6d or 8% in 30d.
For rotation resistant ropes if number of visible broken
wires exceed 2 over a length 6d or 4 in 30d.
RECOMMENDED
DO’S & DON'TS
DO’S
Lubricate ropes with good quality acid free and moisture
free lubricant.
Regularly inspect the sheaves, rollers or pulleys - the life
of a rope largely depends on their conditions.
Inspect ropes and fittings/terminations periodically.
DON’TS
Do not allow ropes in store to deteriorate
Concentrated close group of broken wires in a length of
6d or in one strand.
Do not mishandle ropes when uncoiling or unreeling &
allow kinks to form.
Wire break in the strand valley indicate internal rope
deterioration requiring closer inspection of the rope, two
or more valley breaks in 6xd requires discard.
Do not use Langs lay with a swivel
Broken wires at, adjacent to, the termination, require the
termination to be remade by shortening the rope,
otherwise the rope shall be discarded.
Localised distortion, damage, crushing, kink, loop, birdcage
formation.
Localised core or strand protrusion.
Localised rope diameter reduction or lay variation
associated with waviness.
Collapsed core or complete fracture of one strand.
Sign of severe corrosion or pitting.
Damage due to heat.
Do not use a rope with too large groove diameter on
drums and pulleys.
Do not cut a rope without seizing.
Do not use rope which is not sufficiently flexible for the
size of drum or pulley.
Do not load the rope beyond its safe working load.
Reduction of safety factor may jeopardise not only rope,
but also equipment, job and men.
Note:
Remember - Care in handling , installation, and careful
inspection gives more life and enormous dividends.
Note:
For discard of ropes other than crane wire ropes relevant
code/standard should be referred.
The rope should be examined by a competent person
who should always refer relevant code/recommendation/
standard for deciding rope discard.
d/NRD implies nominal rope diameter
31
ACCREDITATIONS
AND CERTIFICATIONS
ACCREDITATIONS
AND CERTIFICATIONS
33
ACCREDITATION
ACCREDITATION
35
ACCREDITATION
ACCREDITATION
37
ACCREDITATION
ACCREDITATION
39
CONSTRUCTION
OF WIRE ROPES
41
CONSTRUCTION
OF WIRE ROPES
ROUND STRAND 6/7 (6/1)
(Aerial Haulage) Page # 70
ROUND STRAND 6/7 (6/1)
Page # 71
3 STRAND TRAWLER ROPE
Page # 65
FLATTENED STRAND
6x8 (7/ ) & 6x9 ( (8/ ) FS
Page # 72
ROUND STRAND
6/19M (12/6-1) Page # 73
4 STRAND TRAWLER ROPE
4/26SW (10-5+5-5-1) Page # 66
HYFLEX 4
Page # 67
ROUND STRAND
6/19M (12/6-1) Page # 74
TITAN ANCHOR MOORING
& PENNANT ROPES Page # 75
ROUND STRAND 6/7 (6/1)
Page # 68
ROUND STRAND 6/7 (6/1)
(Man - Riding Haulage) Page # 69
ROUND STRAND
6/19S (9-9-1) Page # 76
HOIST & COMPENSATING ROPE
6/19 Classification Page # 77
SPIRAL STRANDS
Page # 62
SPIRAL STRANDS
Page # 63
3 STRAND SAFETY BARRIERS
3 x 7 (6-1) Page # 64
43
CONSTRUCTION
OF WIRE ROPES
ROUND STRAND
6/19S (9-9-1) Page # 78
TITAN DRILLING LINES
6 x 19 class rope with CWR (IWRC)
(Bright) Page # 79
ROUND STRAND
6/19F (12-6F+6-1) Page # 80
ROUND STRAND
6/19F (12-6F+6-1) Page # 81
HYFLEX 6 x 19
Page # 82
ROUND STRAND
6 x 21F (10-5F-5-1) Page # 84
FLATTENED STRAND 6x22 (9/12- FLATTENED STRAND 6x22 (9/12- )
) & 6x25 (12/12- ) FS Page # 86 & 6x25 (12/12- ) FS Page # 87
SHIPPING ROPE
6x24 (15/9/Fibre) Page # 88
FISHING ROPE 6 x 24 (15/9-FC)
& 6 x 24S (12-12-FC) Page # 89
POWERFORM 6/6P
Page # 83
FISHING ROPE 6 x 26WS
(10-5+5-5-1) COMPACTED
Page # 90
ROUND STRAND
6/29F (14-7F+7-1) Page # 91
ROUND STRAND
6 x 21F (10-5F-5-1) Page # 85
ROUND STRAND
6/29F (14-7F+7-1) Page # 92
HYFLEX 6/29Fi
Page # 93
45
CONSTRUCTION
OF WIRE ROPES
CONVEYOR CORD 7 X 7
Page # 102
CONVEYOR CORD 7 X 19
Page # 103
ROUND STRAND BRIDGE ROPES
Page # 104
POWERFORM 8/8P
Page # 105
ROUND STRAND
6/37M (18/12/6-1) Page # 99
HYFLEX 8
Page # 106
HYFLEX 8P
Page # 106
SHIPPING ROPE
6 x 37 (18/12/6/1) Page # 101
POWERFORM ® 8PC
Page # 107
SPECIAL MINING ROPES
MINESFLEX 8 Page # 108
ROUND STRAND
6/36SW (14-7+7-7-1) Page # 94
ROUND STRAND
6/36SW (14-7+7-7-1) Page # 95
TITAN RISER TENSIONER ROPES
6 x 37 class rope with CWR (IWRC)
Page # 96
HYFLEX 6 x 36
Page # 97
SPECIAL MINING ROPES
MINESFLEX 6 Page # 98
ROUND STRAND
6/37M (18/12/6-1) Page # 100
47
CONSTRUCTION
OF WIRE ROPES
POWERFORM 35P
Page # 115
HYFLEX 35
Page # 116
HYFLEX 35P
Page # 116
LOCKED COIL TRACK ROPES &
STRUCTURAL ROPES Page # 117
POWERFORM 18
Page # 113
LOCKED COIL TRACK ROPES &
STRUCTURAL ROPE Page # 118
LOCKED COIL TRACK ROPES &
STRUCTURAL ROPE Page # 119
POWERFORM 35
Page # 115
LOCKED COIL WINDING ROPES
Page # 120
LOCKED COIL GUIDE ROPES
Page # 121
SPECIAL MINING ROPES
MINESFORM 8 PVF Page # 109
HOIST & COMPENSATING ROPE
8 x 19 S (9-9-1) Page # 110
HOIST & COMPENSATING ROPE
Page # 111
GOVERNOR ROPES
6/25F (12-6+6F-1) Page # 112
GOVERNOR ROPES
8/19S (9-9-1) Page # 112
HYFLEX 18
Page # 114
49
APPLICATION WISE
ROPE LIST
51
GENERAL
ENGINEERING
OIL FIELD
Construction
Page ref.
Construction
Page ref.
6x7&7x7
68, 71
6 x 19M
73, 74
TITAN Anchor
Mooring
75
6 x 19F
80, 81
TITAN Drilling Lines
79
6 x 19S
76, 78
6 x 29F
91, 92
6 x 36SW
94, 95
6 x 37M
99, 100
CRANE
Construction
TITAN Riser
Tensioner
96
35 x 7 for cranes
116
FISHING
Page ref.
Construction
Page ref.
Powerform 35/35P
115
3-Strand
65
Hyflex 35/35P
116
4-Strand
66
Powerform 18
113
6x7
68
Hyflex 18
114
6 x 19S
76
Powerform 6/6P
83
6 x 19M
73
Powerform 8/8P
105
6 x 21F
84
Hyflex 8/8P
106
6 x 24 ( 15/9/FC)
89
Powerform 8PC
107
6 x 24S (12/12/FC)
89
Hyflex 4
67
Hyflex 6 x 36
97
6 x 26WS
compacted
90
Hyflex 6 x 19
82
Hyflex 6 x 29F
93
53
MINING
ELEVATOR
Construction
Page ref.
Construction
6 x 7 Winding
69
6 x 19F (CFN)
77
6 x 7 Haulage
68
8 x 19S (CFN)
110
72
8 x 19S + IWRC
(8 x 7 + CF)
111
Governor Rope
112
6 x 8FS
6 x 22 / 6 x 25FS
86, 87
Locked Coil Winding
120
Page ref.
Half-locked Guide
121
6 x 36SW
95
Minesflex 6
98
Minesflex 8
108
Construction
Minesform 8PVF
109
3 x 7 Safety Barriers
64
7 x 37
104
AERIAL
ROPEWAY
Construction
Page ref.
6 x 7 Haulage
70
6 x 19S
76
6 x 8FS
72
Full Locked
Coil Track
117 - 119
STRUCTURAL
Page ref.
Spiral Strand
62, 63
Locked Coil
117 - 119
CONVEYOR CORDS
Construction
Page ref.
7x7
102
7 x 19
103
SHIPPING
Construction
Page ref.
6 x 37
101
6 x 24
88
55
CONSOLIDATED
READY
RECKONER
57
Page No.
Rope
Description
Gen. Engg.
Spl. Crane
Oil Field
Fishing
Structural
Mining
Aerial
Elevator
Shipping
Rope
Description
Gen. Engg.
Spl. Crane
Oil Field
Fishing
Structural
Mining
Aerial
Elevator
Shipping
CONSOLIDATED
READY
RECKONER
Page No.
1x19-1x547
62, 63
6x36SW Steel
75, 95
3x7
64
Hyflex 6x36
97
3x19S-3x31SW
65
Minesflex 6
98
4x26SW
66
6x37M FMC
96, 99, 100
Hyflex 4
67
6x37M Steel
101
6x7FMC
68 - 70
7x7
102
6x7 Steel
71
7x19
103
6x8FS
72
7x37
104
6x19M FMC
73
Powerform 8/8P
105
6x19M Steel
74
Hyflex 8/8P
106
6x19S FMC
76, 77
Powerform 8PC
107
6x19S Steel
78, 79
Minesflex 8
108
6x19F FMC
80, 112
Minesflex 8PVF
109
6x19F Steel
81
8x19S
110-112
Hyflex 6x19
82
Powerform 18
113
Powerform 6/6P
83
Hyflex 18
114
6x21F
84, 85
Powerform 35/35P
115
6x22-6x25FS
86, 87
Hyflex 35/35P
116
6x24
88, 89
LCTR & LCBR
117-119
6x26SW
90
LCWR
120
6x29F
91, 92
LCGR
121
Hyflex 6/29Fi
93
6x36SW FMC
94
Note:
Conveyor Cords only.
59
ROPE
DETAILS
61
SPIRAL
STRANDS
CONSTR.
1x19
1x37
1x61
NOMINAL
ROPE DIA
APPROX.
MASS
mm
11
13
14.5
16
19
22
26
29
32
35
32
35
38
42
45
SPIRAL
STRANDS
MINIMUM BREAKING FORCE
Kg./100m
1570 N/mm2
kN
1770 N/mm2
kN
61.1
85.3
106
129
182
244
341
425
517
619
517
619
729
891
1023
99.9
140
174
211
298
390
544
677
824
986
823
985
1160
1420
1630
113
157
196
238
336
439
614
763
930
Special requirements on breaking
forces can also be met.
Spiral Strands may be provided
conforming to various relevant national
and international standards to suit
customer needs.
Spiral Strands can also be provided in
sizes and constructions not included
in the table above.
928
1110
1310
NOMINAL
ROPE DIA
APPROX.
MASS
mm
1 x 91
1 x 127
... 547
CONSTR.
MINIMUM BREAKING FORCE
Kg./100m
1570 N/mm2
kN
1770 N/mm2
kN
40
42
45
48
51
54
808
891
1020
1160
1310
1470
1280
1410
1620
1850
2090
2340
1450
1590
1830
2080
2350
2640
57
60
64
66
68
71
74
77
80
84
87
90
1640
1820
2070
2200
2340
2550
2770
2990
3230
3560
3820
4090
2610
2890
3280
3490
3710
4040
4390
4750
5130
5660
6070
6500
2940
3250
3700
3940
4180
4560
4950
5360
5790
6380
6840
7320
Special requirements on breaking
forces can also be met.
Spiral Strands may be provided
conforming to various relevant national
and international standards to suit
customer needs.
Spiral Strands can also be provided in
sizes and constructions not included
in the table above.
63
3 STRAND
SAFETY
BARRIERS
3 x 7 (6-1)
3 STRAND
TRAWLER ROPE
NOM.
ROPE
DIA
APPROX.
MASS
MINIMUM BREAKING FORCE
mm
Kg./100m
kN
19
121.00
173.6
Supplied as Pre-stretched
Lay - Right Hand
Coating - Galvanised Class – A (normal
coating mass of 230 gm/m2)
May also be supplied with coating mass of
400 gm/m2.
Typical
Applications
NOM.
ROPE
DIA
mm
12
14
16
18
20
22
24
26
28
30
32
APPROX.
MASS
Kg./100m
52.6
72.2
91.8
115
147
175
211
241
281
322
366
MINIMUM BREAKING FORCE
1570 N/mm2
kN
84
115
146
185
230
276
329
386
447
513
573
Note:
The following are the constructions available for each diameter.
Diameter tolerance -1, +4%. All ropes are galvanised.
Diameter
12 mm
14 mm
16 mm
18 mm
20 mm
22 mm
24 mm
26 mm
28 mm
30 mm
32 mm
1
3
2
1.
2.
3.
4.
5.
6.
Water Fronts
Crossings
Turnings
Hair Pin Bends
Khuds
R.O. Bs/
Approaches
4
5
Constructions
3 x 19 S
3 x 19 S
3 x 19S, 3 x 26SW & 3
3 x 19S, 3 x 26SW & 3
3 x 19S, 3 x 26SW & 3
3 x 19S, 3 x 26SW & 3
3 x 19S, 3 x 26SW & 3
3 x 26SW & 3 x 31SW
3 x 26SW & 3 x 31SW
3 x 26SW & 3 x 31SW
3 x 26SW & 3 x 31SW
x
x
x
x
x
31SW
31SW
31SW
31SW
31SW
6
65
4 STRAND
TRAWLER ROPE
4/26SW
(10-5+5-5-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
mm
12
14
16
18
20
22
24
26
28
30
32
FIBRE
56.9
77.4
100
126
156
188
224
263
305
350
398
MINIMUM BREAKING FORCE
1570 N/mm2
kN
82.1
112
146
185
228
275
328
385
446
512
583
HYFLEX 4
NOM.
ROPE
DIA
mm
16
18
19
MINIMUM BREAKING FORCE
APPROX.
MASS
1770 N/mm2
Kg./100m
kN
44.8
65.4
88.8
64.0
92.3
125.5
69.4
99.9
136.5
3/4
117
149
167
164.5
207.5
231.5
177.4
224.5
250.5
7/8
183
214
218
256.5
310
317
277.5
336
343
1
253
275
284
369
399
413
400
432
448
298
346
398
433
502
576
469
544
624
10
12
14
5/8
20
22
24
25
Note:
All intermediate sizes are also available.
All Ropes are galvanised.
NOM.
ROPE
DIA
in
26
28
30
1960 N/mm2
kN
32
34
36
1.1/4
456
512
574
656
740
830
689
802
898
38
40
42
1.1/2
640
709
782
924
1002
1102
1002
1082
1192
859
898
1212
1272
1312
1372
44
45
Note:
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
67
ROUND
STRAND
6/7 (6/1)
ROUND STRAND
6/7 (6/1) (Man–
Riding Haulage)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
mm
3
4
5
6
8
9
10
11
12
13
14
16
18
20
22
24
26
28
32
36
40
FIBRE CORE
3.22
5.72
8.94
12.9
22.9
28.9
35.7
43.2
51.5
60.4
70.1
91.5
116
143
173
206
242
280
366
463
572
kN
4.7
8.3
13.0
18.8
33.4
42.2
52.2
63.1
75.1
88.1
102
134
169
209
252
300
353
409
534
676
835
MINIMUM BREAKING FORCE
1770 N/mm2
kN
5.3
9.4
14.7
21.1
37.6
47.6
58.8
71.1
84.7
99.4
115
151
191
235
285
339
397
461
602
762
941
1960 N/mm2
kN
5.9
10.4
16
23
42
53
65
79
94
110
127
167
212
260
316
375
440
510
667
844
1042
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
13
14
16
18
19
20
21
22
24
25
26
27
28
29
FIBRE CORE
60.4
70.1
91.5
116
129
143
158
173
206
223
242
261
280
301
kN
88.1
102
134
169
188
209
230
252
300
326
353
380
409
439
kN
99.4
115
151
191
212
235
259
285
339
367
397
429
461
495
kN
110
128
167
211
235
260
287
315
375
407
440
475
510
548
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
Note:
All intermediate sizes are also available
69
ROUND STRAND
6/7 (6/1) (Aerial
Haulage)
ROUND
STRAND
6/7 (6/1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1420 N/mm2
1570 N/mm2
1770 N/mm2
mm
8
10
12
14
16
18
20
22
26
28
32
36
38
40
FIBRE CORE
22.9
35.7
51.5
70.1
91.5
116
143
173
242
280
366
463
516
572
kN
30
47
68
92
121
153
189
228
319
370
483
611
681
755
kN
33
52
75
102
134
169
209
252
353
409
534
676
753
834
kN
38
59
85
115
151
191
235
285
397
461
602
762
849
941
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
3
4
5
6
8
9
10
11
12
13
14
16
18
20
22
24
26
28
32
36
40
STEEL CORE
3.54
6.29
9.83
14.2
25.2
31.8
39.3
47.5
56.7
66.4
77.1
101
128
157
190
227
266
308
403
509
629
kN
5.1
9.0
14.0
20.0
36.1
45.6
56.3
68.2
81.1
95.2
110
144
183
225
273
324
381
441
577
730
901
kN
5.7
10.2
15.9
22.9
40.6
51.4
63.5
76.8
91.5
107
124
163
206
254
307
366
429
498
650
823
1010
kN
6.3
11.3
17.6
25.0
45.0
57.0
70.0
85.0
101
118
137
180
228
281
340
405
475
551
720
911
1118
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
71
FLATTENED
STRAND
ROUND STRAND
6 x 8(7/ )
& 6 x 9 (8/ )FS
6/19M (12/6-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1420 N/mm2
mm
13
14
16
18
19
20
22
24
25
26
28
29
32
33
35
FIBRE CORE
69.30
80.40
105.00
133.00
148.00
164.00
198.00
236.00
256.00
277.00
321.00
345.00
420.00
446.00
502.00
kN
87
101
132
167
186
206
249
296
321
347
403
432
526
560
630
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
1570 N/mm2
kN
96
111
145
184
205
227
275
327
355
384
446
478
582
619
696
1770 N/mm2
kN
108
126
164
208
231
256
310
369
400
433
502
539
656
698
785
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
3
4
6
8
10
12
12.7
14
16
18
19
20
22
24
25
26
28
30
32
34
36
38
40
FIBRE CORE
3.11
5.54
12.50
22.10
34.60
49.80
56.40
67.80
88.60
112.00
125.00
138.00
167.00
199.00
215.92
234.00
271.00
311.00
354.00
400.00
448.00
500.00
554.00
kN
4.3
7.7
17
31
48
69
77
95
124
156
174
193
234
278
301
326
378
434
494
557
625
697
772
kN
4.9
8.7
20
35
54
78
87
107
139
176
196
218
263
313
340
368
426
490
557
629
705
785
870
kN
5.4
9.6
22
39
60
87
97
118
154
195
217
241
292
347
376
407
472
542
617
697
781
870
964
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
73
TITAN ANCHOR
MOORING
ROUND STRAND
6/19M (12/6-1)
6 x 19 and 6 x 37 class
rope with CWR (IWRC)
Bright or Drawn Galvanised (RRL)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
3
4
6
8
10
12
12.7
14
16
18
19
20
22
24
25
26
28
30
32
34
36
38
40
STEEL CORE
3.42
6.09
13.8
24.3
38.1
54.8
63.5
74.6
97.4
123
137
152
184
219
238
257
298
342
390
440
493
550
609
kN
4.6
8.3
19
33
52
75
84
102
133
169
188
208
252
300
325
352
409
469
534
602
675
752
834
kN
5.3
9.4
21
38
59
85
95
115
150
190
212
235
284
338
367
397
461
529
602
680
761
848
940
kN
5.9
10.4
23
42
65
94
105
128
167
211
235
260
315
375
407
440
510
585
666
752
843
939
1041
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
NOMINAL
ROPE DIA
inch
1-1/2
1-5/8
1-3/4
1-7/8
2.0
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3.0
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
4.0
4-1/8
4-1/4
4-1/2
5.0
mm
38
42
45
48
52
54
58
60
64
67
71
74
77
80
83
87
90
92
96
103
105
108
115
127
APPROX
MASS
(Kg/100m)
EEIPS
SUPER TITAN
TITAN MAX
kN
kN
619
726
844
967
1100
1240
1390
1550
1730
1900
2080
2280
2470
2680
2900
3130
3340
3540
3870
4400
4680
4970
5570
6990
kN
1110
1300
1500
1710
1930
2160
2420
2690
2950
3240
3530
3840
4160
4490
4830
5180
5520
5860
6270
6340
6700
7110
7900
9590
MINIMUM BREAKING FORCE (Fmin)
2222
2492
2761
3063
3365
3689
4025
4382
4751
5120
5512
5903
6294
6662
7029
7908
8119
8928
9845
11000
4940
5320
5730
6138
6665
6967
7255
** Approx Mass values in table are valid for EEIPS grade only. Rope Mass for
Supertitan & Titan Max is available on request and prior confirmation.
TYPICAL EXAMPLE
Class
Construction
Rope
Strand
6 x 19 6 x 25 F
12-6F-6-1
6 x 37 6 x 31 WS
12-6+6-6-1
6 x 36 WS
14-7+7-7-1
6 x 41 WS
16-8+8-8-1
6 x 49 SWS
16-8+8-8-8-1
6 x 46(52) WS 18-9+9-9/6-1
Nominal Rope Dia
Inch.
mm
- 2.1/2
38 - 64
- 2.1/2
38 - 64
-3
38 - 77
- 3.1/2
52 - 90
- 3.1/2
52 - 90
- 4.1/2
77 - 115
75
ROUND STRAND
HOIST &
COMPENSATING
ROPE
6/19S (9-9-1)
6/19 Classification
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
6
8
10
12
13
14
16
18
19
20
22
24
25
26
28
30
32
34
36
38
40
42
44
46
48
50
51
FIBRE CORE
13.4
23.8
37.3
53.7
63.0
73.0
95.4
121
135
149
180
215
233
252
292
335
382
431
483
538
596
657
721
788
858
932
970
kN
33.2
52
75
88
102
133
168
188
208
252
299
325
351
407
468
532
600
673
750
831
917
1006
1099
1197
1299
1351
kN
21.1
37.5
59
84
99
115
150
190
211
234
284
337
366
396
459
527
600
677
759
846
937
1033
1134
1240
1350
1465
1524
kN
42
65
93
110
127
166
210
234
260
314
374
406
439
509
584
664
750
841
937
1038
1144
1256
1373
1495
1622
1688
MINIMUM BREAKING FORCE
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
mm
FIBRE CORE (CFN)
612.5
17.80
6.5
15.3
822.1
31.70
929.2
40.20
1035.2
49.50
1142.6
59.70
1250
71.30
1360
83.70
1471
97.00
1690
127.00
19127
179.00
22170
240.00
MINIMUM BREAKING FORCE (KN)
1570 or 1370 / 1770 N/mm2
22.40
Note:
All intermediate sizes are also available
77
TITAN
DRILLING
LINES
ROUND STRAND
6/19S (9-9-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
mm
6
8
10
12
13
14
16
18
19
20
22
24
25
26
28
30
32
34
36
38
40
42
44
46
48
50
51
STEEL CORE
15.0
26.2
41.0
59.0
69.3
80.3
105
133
149
164
198
237
256
277
321
368
420
474
531
592
656
721
792
865
942
1022
1064
6 x 19 class rope
with CWR (IWRC) (Bright)
MINIMUM BREAKING FORCE
1570 N/mm2
1770 N/mm2
1960 N/mm2
kN
kN
22.8
40.0
63.0
91.0
107
124
162
205
228
253
306
364
396
428
496
570
648
731
820
913
1012
1116
1225
1339
1458
1582
1646
kN
36.0
56.0
81.0
95.0
110
144
182
203
224
272
323
350
379
440
505
575
648
727
810
898
990
1086
1187
1293
1403
1460
45.0
70.0
101
118
137
179
227
253
280
339
403
438
474
549
630
717
810
908
1012
1121
1236
1356
1482
1614
1751
1822
NOMINAL
ROPE DIA
Inch.
3/4
7/8
1.0
1 - 1/8
1 - 1/4
1 - 3/8
1 - 1/2
1 - 5/8
1 - 3/4
1 - 7/8
2.0
APPROX.
MASS
mm
19
22
26
29
32
35
38
42
45
48
52
MINIMUM BREAKING FORCE
Kg./100m
155
211
275
348
430
521
619
726
844
967
1100
EIPS
EEIPS
kN
262
354
460
568
711
854
1010
1170
1360
1550
1760
kN
288
389
506
636
782
943
1112
1300
1500
1710
1930
TYPICAL EXAMPLE
Class
6 x 19
Construction
Nominal Rope Dia
Rope
Strand
Inch.
mm
6 x 19 S
6 x 26 WS
9-9-1
10-5+5-5-1
3/4 - 2
3/4 - 2
19 - 52
19 - 52
Note:
All intermediate sizes are also available
79
ROUND STRAND
ROUND STRAND
6/19F (12-6F+6-1)
6/19F (12-6F+6-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
mm
8
10
12
13
14
16
18
19
20
22
24
26
28
32
34
36
38
40
44
46
48
52
58
60
64
FIBRE CORE
24.3
38.0
54.7
64.3
74.5
97.3
123
137
152
184
219
257
298
389
439
493
549
608
736
804
876
1028
1279
1369
1557
MINIMUM BREAKING FORCE
1570 N/mm2
kN
34
53
76
90
104
136
172
191
212
257
305
358
416
543
613
687
766
848
1026
1122
1222
1434
1784
1909
2172
1770 N/mm2
kN
38
60
86
101
117
153
194
216
239
289
344
404
469
612
691
775
863
956
1157
1265
1377
1616
2011
2152
2448
1960 N/mm2
kN
42
66
95
112
130
169
214
239
265
320
381
447
519
678
765
858
956
1059
1281
1401
1525
1790
2227
2383
2711
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
mm
STEEL CORE
kN
kN
8
10
12
13
14
16
18
19
20
22
24
26
28
32
34
36
38
40
44
46
48
52
58
60
64
26.7
41.8
60.2
70.7
82.0
107
135
151
167
202
241
283
328
428
484
542
604
669
810
885
964
1131
1407
1506
1714
MINIMUM BREAKING FORCE
37
57
82
97
112
147
186
206
229
277
330
387
449
586
662
742
827
916
1110
1212
1319
1448
1927
2061
2345
Note:
Note:
All intermediate sizes are also available
All intermediate sizes are also available
41
65
93
109
127
165
209
233
258
312
372
436
506
661
746
837
932
1030
1250
1366
1487
1745
2172
2324
2644
1960 N/mm2
kN
46
71
103
121
140
183
232
258
286
346
412
483
560
732
826
926
1032
1144
1384
1513
1647
1933
2403
2573
2928
81
POWERFORM
6/6P
HYFLEX 6X19
NOM.
ROPE
DIA
mm
NOM.
ROPE
DIA
in
6
8
10
12
1/2
13
14
16
18
20
22
24
26
28
32
36
40
44
48
52
56
60
5/8
7/8
15/16
1
1.1/4
1.7/8
MINIMUM BREAKING FORCE
APPROX.
MASS
1770 N/mm2
1960 N/mm2
Kg./100m
kN
kN
14.3
25.5
39.8
57.3
64.2
67.3
78.0
102
129
159
193
197
229
257
269
312
408
516
637
771
917
1076
1248
1433
22.7
40.3
63.0
90.7
102
107
124
161
204
252
305
311
363
407
426
494
645
817
1010
1220
1450
1700
1980
2270
25.1
44.7
69.8
101
113
118
137
179
226
279
338
345
402
450
472
547
715
904
1120
1350
1610
1890
2190
2510
Note:
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
NOM.
ROPE
DIA
mm
10
11
13
14
16
18
19
20
22
24
28
32
34
36
38
40
46
48
50
52
56
58
60
NOM.
ROPE
DIA
in
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
MINIMUM BREAKING FORCE
APPROX.
MASS
1770 N/mm2
Kg./100m
kN
kN
46.4
56.1
74.8
78.4
90.9
119
150
168
186
225
229
267
299
364
475
518
581
647
717
948
1032
1120
1211
1405
1507
1613
69.5
83.8
113
118
137
178
225
251
278
336
343
400
449
545
712
804
901
1004
1112
1362
1483
1609
1741
2019
2166
2317
85.7
98.6
140
147
170
218
276
304
335
400
408
489
552
657
846
916
1065
1165
1295
1665
1885
1975
2135
2475
2650
2810
1960 N/mm2
Note:
‘P’ signifies full plastic impregnation of the steel core
POWERFORM 6P is available only for 16 mm & above. Rope Sizes
and MBL not shown above are also available on request
and prior confirmation.
Mass per unit length of POWERFORM 6P increases by approx. 3%
83
ROUND STRAND
ROUND STRAND
6 x 21F (10-5F-5-1)
6 x 21F (10-5F-5-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1770 N/mm2
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1570 N/mm2
mm
FIBRE CORE
kN
kN
mm
STEEL CORE
kN
8.00
9.00
10.00
11.00
12.00
13.00
14.00
16.00
18.00
19.00
20.00
22.00
24.00
26.00
28.00
32.00
24.3
30.8
38
46
54.7
64.3
74.5
97.3
123
137
152
184
219
257
298
389
34
43
53
64
76
90
104
136
172
191
212
257
305
358
416
543
38
48
60
72
86
101
117
153
194
216
239
289
344
404
469
612
8.00
9.00
10.00
11.00
12.00
13.00
14.00
16.00
18.00
19.00
20.00
22.00
24.00
26.00
28.00
32.00
26.8
33.9
41.8
50.6
60.2
70.7
82
107
135
151
167
202
241
283
328
428
MINIMUM BREAKING FORCE
MINIMUM BREAKING FORCE
37
46
57
69
82
97
112
147
186
207
229
277
330
387
449
586
Note:
Note:
All intermediate sizes are also available and all
the above ropes are galvanised only
All intermediate sizes are also available and all
the above ropes are galvanised only
1770 N/mm2
kN
41
52
65
78
93
109
127
165
209
233
258
312
372
436
506
661
85
FLATTENED
STRAND
FLATTENED
STRAND
6 x 22 (9/12- ) &
6 x 25 (12/12- )FS
6 x 22 (9/12- ) &
6 x 25 (12/12- )FS
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1420 N/mm2
1570 N/mm2
mm
FIBRE CORE
kN
kN
16
18
20
22
24
25
26
28
29
32
33
35
36
37
38
40
105.00
133.00
164.00
198.00
236.00
256.00
277.00
321.00
345.00
420.00
446.00
502.00
531.00
561.00
592.00
656.00
128
161
199
241
287
312
337
391
419
510
543
611
646
682
720
797
141
179
220
267
317
344
373
432
463
564
600
675
714
754
796
882
1770 N/mm2
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1420 N/mm2
1570 N/mm2
kN
mm
STEEL CORE
kN
kN
kN
114.00
145.00
179.00
216.00
257.00
279.00
302.00
350.00
376.00
458.00
487.00
548.00
579.00
612.00
645.00
715.00
135
171
211
256
304
330
357
414
444
541
575
647
685
723
763
845
150
189
234
283
336
365
395
458
491
598
636
715
757
800
843
934
169
213
263
319
379
412
445
516
554
674
717
807
853
901
951
1054
MINIMUM BREAKING FORCE
159
201
249
301
358
388
420
487
522
636
677
761
805
851
897
994
16
18
20
22
24
25
26
28
29
32
33
35
36
37
38
40
MINIMUM BREAKING FORCE
Note:
Note:
All intermediate sizes are also available
All intermediate sizes are also available
1770 N/mm2
87
SHIPPING
ROPE
FISHING ROPE
6 x 24 (15/9/Fibre)
6 x 24 (15/9-FC)
& 6 x 24S (12-12-FC)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1420 N/mm2
1420 N/mm2
mm
FIBRE CORE
1570 N/mm2
kN
kN
mm
FIBRE CORE
kN
kN
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
32.00
36.00
40.00
20.40
25.80
31.80
38.50
45.80
62.40
81.50
103.00
127.00
154.00
183.00
215.00
250.00
326.00
413.00
509.00
kN
25
32
40
48
57
78
102
129
159
193
229
269
312
407
516
637
28
36
44
53
63
86
113
143
176
213
253
297
345
450
570
704
8.00
9.00
10.00
11.00
12.00
13.00
14.00
16.00
18.00
19.00
20.00
22.00
24.00
26.00
28.00
32.00
19.7
24.9
30.8
37.3
44.4
52.1
60.4
78.8
99.8
111
123
149
177
208
241
315
25.4
32.2
39.8
48.1
57.3
67.2
77.9
102
129
144
159
192
229
269
312
407
28.1
35.6
44
53.2
63.3
74.3
86.2
113
142
159
176
213
253
297
345
450
31.7
40.1
49.6
60
71.4
83.8
97.1
126.9
160.6
178.9
198.2
239.9
285.5
335
388.6
507.5
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
and all the above ropes are galvanised only
MINIMUM BREAKING FORCE
1770 N/mm2
Note:
All intermediate sizes are also available
and all the above ropes are galvanised only
89
FISHING ROPE
ROUND STRAND
6 x 26WS (10-5+5-5-1)
COMPACTED
6/29F (14-7F+7-1)
NOM.
ROPE
DIA
APPROX. MASS
Kg./100m
MINIMUM BREAKING FORCE
POLY CORE
CWR
mm
POLY CORE
CWR
kN
kN
14.0
16.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
82
106
136
167
203
241
283
331
380
92
119
152
186
226
268
316
367
423
128.0
167.0
212.0
261.0
316.0
376.0
442.0
512.0
588.0
141.0
184.0
234.0
290.0
352.0
416.0
495.0
563.0
657.0
Note:
Dual Tensile – outer wires: 1570 N/mm2
inner wires: 2160 N/mm2
All intermediate sizes are also available
and all the above ropes are galvanised only
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
mm
FIBRE CORE
kN
kN
kN
37.9
47.5
59.8
75.0
98.7
122
152
190
238
299
343
378
428
481
536
611
690
774
862
954
993
1073
1198
1375
53
66
82
103
135
170
210
263
328
412
473
522
590
662
739
841
949
1064
1189
1313
1363
1472
1650
1889
59
74
93
116
152
192
237
297
370
464
533
588
665
746
833
948
1070
1200
1340
1480
1537
1660
1860
2130
66
82
102
128
168
213
262
329
410
514
590
651
736
826
922
1050
1185
1329
1484
1639
1702
1838
2060
2359
10
11.2
12.5
14
16
18
20
22.4
25
28
30
31.5
33.5
35.5
37.5
40
42.5
45
47.5
50
51
53
56
60
MINIMUM BREAKING FORCE
1960 N/mm2
Note:
All intermediate sizes are also available
91
ROUND
STRAND
HYFLEX 6/29Fi
6/29F (14-7F+7-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
STEEL CORE
kN
kN
kN
10
11.2
12.5
14
16
18
20
22.4
25
28
30
31.5
33.5
35.5
37.5
40
42.5
45
47.5
50
51
53
56
60
42.4
53.5
66.7
83.7
107
137
169
214
264
331
379
430
473
530
592
674
761
852
949
1052
1097
1185
1322
1518
60
75
94
118
153
194
240
302
375
471
540
596
674
757
844
958
1082
1215
1357
1499
1561
1685
1880
2164
68
85
106
133
173
219
271
340
423
531
609
672
760
853
952
1080
1220
1370
1530
1690
1759
1900
2120
2440
73
92
115
144
188
238
294
369
459
576
661
729
825
926
1033
1172
1324
1487
1660
1834
1909
2062
2301
2648
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
NOM.
ROPE
DIA
mm
10
11.2
12.5
14
16
18
20
22.4
25
28
30
31.5
33.5
35.5
37.5
40
42.5
45
47.5
50
53
56
60
APPROX.
MASS
Kg./100m
44
55.2
68.8
86.3
113
143
176
221
275
345
396
437
494
555
619
704
795
891
993
1100
1240
1380
1580
MINIMUM BREAKING FORCE
1620 N/mm2
1770 N/mm2
kN
kN
63.6
79.8
99.4
125
163
206
254
319
398
499
573
631
714
802
895
1020
1150
1290
1440
1590
1790
2000
2290
67.7
84.9
106
133
173
219
271
340
423
531
609
672
760
853
952
1080
1220
1370
1530
1690
1900
2120
2440
Note:
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
93
ROUND
STRAND
ROUND
STRAND
6/36SW (14-7+7-7-1)
6/36SW (14-7+7-7-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1960 N/mm2
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1570 N/mm2
mm
FIBRE CORE
kN
1770 N/mm2
kN
kN
mm
STEEL CORE
kN
kN
8
9
10
11
12
13
14
16
18
20
22
24
25
28
32
36
38
40
44
46
48
52
56
60
64
24.32
30.78
38.0
46.0
54.7
64.3
74.5
97.3
123
152
184
219
238
298
389
493
549
608
736
804
876
1030
1190
1369
1557
33.3
42.1
52.0
62.9
74.4
87.9
101
133
168
203
250
298
325
405
530
670
748
828
1000
1100
1190
1400
1620
1865
2121
kN
37
47
58
70
84
98
114
149
189
234
282
336
363
458
598
757
843
934
1130
1227
1350
1580
1830
2102
2392
41
53
65
79
93
110
127
166
209
259
313
372
406
507
662
838
934
1035
1252
1375
1490
1748
2028
2328
2648
41
52
63
76
90
107
124
161
204
216
252
304
363
394
493
644
816
911
1009
1220
1334
1450
1710
1980
2124
2270
3643
4036
45
57
70
85
101
118
137
179
226
240
279
338
402
436
548
715
905
1008
1117
1352
1478
1609
1888
2190
2349
2514
4034
4469
MINIMUM BREAKING FORCE
Note:
All intermediate sizes are also available
8
9
10
11
12
13
14
16
18
19
20
22
24
25
28
32
36
38
40
44
46
48
52
56
58
60
76
80
26.77
33.80
41.84
50.58
60.20
70.65
82
107
135
153
167
202
241
262
328
428
542
604
669
810
885
964
1130
1310
1405
1506
2415
2675
MINIMUM BREAKING FORCE
36
45
56
68
81
95
109
143
181
192
221
271
322
349
438
571
724
808
894
1080
1184
1290
1510
1750
1877
2014
3231
3580
1960 N/mm2
Note:
All intermediate sizes are also available
The following construction holds good for the above chart:
6x41/6x47/6x43/6x49/6x52 SW – 38-90mm & 6x61SW – 57-125mm
95
TITAN RISER
TENSIONER
ROPES
HYFLEX
6 x 36
6 x 37 class rope with
CWR (IWRC) (Bright or galvanised)
NOMINAL
ROPE DIA
Inch.
1
111112
1/4
1/2
5/8
3/4
7/8
APPROX.
MASS
MINIMUM
BREAKING FORCE
mm
Kg./100m
kN
26
32
38
42
45
48
52
275
430
619
726
844
967
1100
458
711
1010
1170
1360
1550
1760
NOM.
ROPE
DIA
mm
8
9
10
11
12
1/2
TYPICAL EXAMPLE
Class
6 x 37
Construction
NOM.
ROPE
DIA
in
Nominal Rope Dia
Rope
Strand
Inch.
mm
6 x 36 WS
6 x 41 WS
14-7+7-7-1
16-8+8-8-1
1 - 1¾
1¾ - 2
26 - 45
45 - 52
13
14
16
18
20
22
24
26
28
32
36
40
44
48
52
56
60
5/8
7/8
15/16
1
1.1/4
1.7/8
2.3/8
MINIMUM BREAKING FORCE
APPROX.
MASS
1770 N/mm2
Kg./100m
kN
kN
26.1
33.2
40.8
49.4
58.8
66.0
69.2
80.2
104
132
163
197
201
235
263
276
320
418
531
655
793
943
1111
1281
1471
40.3
51.0
63.0
76.2
90.7
102
107
124
161
204
252
305
311
363
407
426
494
645
817
1010
1220
1450
1700
1980
2270
44.7
56.5
69.8
84.4
101
113
118
137
179
226
279
338
345
402
450
472
547
715
904
1120
1350
1610
1890
2190
2510
1960 N/mm2
Note:
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
97
SPECIAL
MINING
ROPES
ROUND
STRAND
MINESFLEX 6
6/37M (18/12/6-1)
NOMINAL
ROPE DIA
CONSTR.
mm
6x37SF
38
40
Inch.
Kg./100m
kN
MT
1 - 1/2
597
662
705
730
801
875
953
1034
1067
1118
1206
1297
1363
1403
1502
1604
1656
1709
1884
2057
912
1010
1069
1109
1216
1334
1452
1579
1628
1707
1834
1982
2070
2139
2286
2443
2521
2600
2835
3090
93
103
109
113
124
136
148
161
166
174
187
202
211
218
233
249
257
265
289
315
1 - 5/8
42
44
46
48
50
1 - 3/4
1 - 7/8
2
52
54
56
6x43SF
6x57SF
2 - 1/8
2 - 1/4
58
60
62
63
64
67
70
APPROX. MINIMUM BREAKING FORCE
MASS
2 - 3/8
2 - 1/2
2 - 5/8
2 - 3/4
Note:
Sizes and breaking load values not shown
above are also available on request.
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
mm
FIBRE CORE
kN
kN
6
8
10
12
14
16
18
20
22
24
26
28
30
32
36
38
40
42
44
46
48
52
56
60
64
12.5
22.1
34.6
49.8
67.8
88.6
112
138
167
199
234
271
311
354
448
500
554
611
670
732
797
936
1090
1250
1420
17.5
30
46
67
91
118
150
185
224
267
313
363
417
474
600
668
741
816
896
979
1066
1252
1451
1666
1896
18.8
33
52
75
102
134
169
209
253
301
353
409
469
534
676
753
835
920
1010
1104
1202
1411
1636
1878
2137
MINIMUM BREAKING FORCE
1960 N/mm2
kN
21
37
58
83
113
148
187
231
280
333
391
453
520
592
749
834
924
1020
1119
1222
1331
1562
1812
2080
2367
Note:
All intermediate sizes are also available
99
ROUND
STRAND
SHIPPING
ROPE
6/37M (18/12/6-1)
6 x 37M (18/12/6/1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1960 N/mm2
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1420 N/mm2
mm
STEEL CORE
kN
kN
kN
mm
FIBRE CORE
kN
6
8
10
12
14
16
18
20
22
24
26
28
30
32
36
38
40
42
44
46
48
52
56
60
64
13.7
24.4
38.1
54.8
74.6
97.4
123
152
184
219
257
298
342
390
493
550
609
670
737
804
877
1029
1190
1370
1560
17.7
32
50
72
98
128
162
200
242
288
338
392
450
512
648
722
800
882
968
1058
1150
1350
1570
1800
2050
kN
20
36
56
81
110
144
183
225
273
325
381
442
507
577
730
814
902
994
1090
1192
1300
1520
1770
2030
2310
23
40
62
90
122
160
202
250
302
359
422
489
562
639
809
901
999
1101
1208
1321
1438
1687
1957
2246
2555
12.00
14.00
16.00
18.00
20.00
22.00
24.00
26.00
28.00
32.00
36.00
40.00
44.00
48.00
52.00
56.00
60
82
107
136
167
203
241
283
328
429
543
670
810
964
1132
1313
67
91
118
150
185
224
267
313
363
474
600
741
896
1066
1252
1451
MINIMUM BREAKING FORCE
49.80
67.80
88.60
112.00
138.00
167.00
199.00
234.00
271.00
354.00
448.00
554.00
670.00
797.00
936.00
1085.00
MINIMUM BREAKING FORCE
1570 N/mm2
Note:
All intermediate sizes are also available
and all the above ropes are galvanised only
Note:
All intermediate sizes are also available
101
CONVEYOR
CORD
CONVEYOR
CORD
7X7
7X19
CORD
DIA
MIN.
BREAKING LOAD
STEEL
SECTION
LINEAR
DENSITY
CORD
DIA
MIN.
BREAKING LOAD
STEEL
SECTION
LINEAR
DENSITY
mm
kN
(mm2)
(g/m)
mm
kN
(mm2)
(g/m)
1.62
1.92
2.80
3.50
3.60
3.70
3.80
4.00
4.10
4.40
4.50
4.80
5.00
5.20
5.30
5.40
5.50
3.00
4.60
8.00
12.80
13.40
14.50
15.00
16.70
17.60
19.80
20.80
23.30
25.20
26.70
27.70
29.70
29.90
1.23
1.94
3.53
5.64
6.15
6.34
6.65
7.79
7.75
9.19
9.48
10.76
11.60
12.76
13.21
13.49
14.24
10
14
29
46
50
52
55
64
64
76
79
88
95
105
108
111
117
6.00
6.40
6.80
7.00
7.60
8.10
8.80
9.30
9.50
9.60
33.50
37.40
43.00
46.20
53.00
57.70
67.60
79.20
79.20
86.40
15.71
17.55
20.27
21.21
24.65
28.54
33.39
36.39
38.26
40.01
131
147
169
176
204
238
279
302
320
330
Drawn Galvanised.
Quality of zinc suits rubber adhesion.
Drawn Galvanised.
Quality of zinc suits rubber adhesion.
Excellent pull-out test before & after ageing.
Excellent dynamic cycle.
Linear density is approximate & for guidance only.
Note:
All intermediate sizes are also available
Excellent pull-out test before & after ageing.
Excellent dynamic cycle.
Linear density is approximate & for guidance only.
Note:
All intermediate sizes are also available
103
POWERFORM
8/8P
ROUND STRAND
BRIDGE ROPES
7X37
NOM.
ROPE
DIA
mm
25
28
32
35
38
40
42
44
48
50
APPROX.
MASS
Kg./100m
MINIMUM BREAKING FORCE
238
299
391
467
550
610
673
738
878
953
340
426
556
665
784
869
958
1050
1250
1360
1570 N/mm2
kN
6 Strand ropes with steel strand core, galvanised
and pre stretched with end fittings in ready to install
condition construction – 7 x 37 (18 : 12 : 6 –1).
Bridge ropes in 7 x 19 (12 : 6 – 1) & 7 x 7 (6 –1)
constructions with wire strand core fully galvanised
and prestretched and end fittings in ready to install
condition are also available.
Special requirements on breaking forces can also
be met.
NOM.
ROPE
DIA
mm
10
12
14
16
19
20
22
24
26
28
30
32
34
36
38
40
44
Round Strand Bridge Ropes may be provided
conforming to various relevant national and
international standards to suit customer needs.
46
48
50
Round Strand Bridge Ropes can also be provided
in sizes and constructions not included in the table
above.
52
NOM.
ROPE
DIA
in
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
APPROX.
MASS
Kg./100m
46.0
66.2
74.2
90.2
118
166
184
223
227
265
297
318
368
384
423
481
543
609
679
752
929
948
1016
1106
1200
1239
1298
MINIMUM BREAKING FORCE
1960 N/mm2
kN
87.8
126
142
172
225
317
351
425
434
506
567
594
688
717
790
899
1013
1138
1268
1405
1700
1735
1858
2023
2200
2266
2374
2160 N/mm2
kN
94.0
135
152
184
241
339
376
455
464
541
606
635
737
767
846
960
1083
1218
1357
1503
1819
1856
1985
2162
2349
2425
2541
Note:
‘P’ signifies full Plastic impregnation of steel core.
POWERFORM 8P is available only for 16 mm & above. Rope Sizes
and MBL not shown above are also available on request and prior
confirmation.
Mass per unit length of POWERFORM 8P increases by approx. 3%
105
POWERFORM
8PC
HYFLEX 8/8P
NOM.
ROPE
DIA
mm
10
12
14
16
18
19
22
24
26
28
30
32
36
38
42
44
48
50
52
NOM.
ROPE
DIA
in
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
APPROX.
MASS
MINIMUM BREAKING FORCE
1960 N/mm2
Kg./100m
kN
43.5
62.6
70.2
85.3
111
141
157
211
215
251
281
297
345
359
396
451
570
635
785
862
879
1025
1113
1148
1203
72.9
105
123
143
187
239
269
356
360
423
470
500
572
596
656
747
935
1043
1305
1412
1441
1680
1833
1882
1972
2160 N/mm2
kN
81.4
117
131
160
208
267
300
400
402
475
525
562
642
665
733
836
1053
1172
1462
1577
1613
1885
2065
2101
2202
NOM.
ROPE
DIA
mm
NOM.
ROPE
DIA
in
APPROX.
MASS
MINIMUM BREAKING FORCE
1960 N/mm2
2160 N/mm2
Kg./100m
kN
kN
8
9
10
31.7
40.1
49.5
60.5
76.6
94.7
66.5
84.2
103
11
12
59.9
71.3
79.8
112
138
152
121
150
164
83.7
97.0
111
159
181
213
172
197
232
1/2
13
14
15
16
17
18
5/8
127
143
160
239
269
300
260
292
326
19
20
22
3/4
179
198
240
341
375
448
371
408
487
7/8
245
285
319
457
527
592
497
574
646
335
388
620
735
677
801
24
1
26
28
Note:
Note:
‘PC’ signifies Parallel Closed rope.
‘P’ signifies full Plastic impregnation of steel core.
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
POWERFORM 8P is available only for 16 mm & above. Rope Sizes
and MBL not shown above are also available on request and prior
confirmation.
Mass per unit length of POWERFORM 8P increases by approx. 3%
107
SPECIAL
MINING
ROPES
SPECIAL
MINING
ROPES
MINESFLEX 8
MINESFORM 8 PVF
NOMINAL
ROPE DIA
CONSTR.
8x37SF
mm
Inch.
Kg./100m
kN
MT
38
40
1-1/2
599
664
707
732
804
878
956
1038
1071
1123
1211
1302
1356
1397
1513
1615
1668
1721
1905
2079
2263
2451
2673
2923
3138
872
961
1030
1069
1167
1275
1393
1511
1560
1628
1756
1893
1972
2031
2197
2345
2423
2502
2766
3021
3286
3561
3885
4238
4552
88.9
98
105
109
119
130
142
154
159
166
179
193
201
207
224
239
247
255
282
308
335
363
396
432
464
1 - 5/8
42
44
46
48
50
1 - 3/4
1 - 7/8
2
52
54
56
2 - 1/8
2 - 1/4
8x50SF
APPROX. MINIMUM BREAKING FORCE
MASS
58
60
62
63
64
67
70
76
83
86
2 - 3/8
2 - 1/2
2 - 5/8
2 - 3/4
2-7/8
3
3 - 1/8
3 - 1/4
3 - 3/8
Note:
Sizes and breaking load values not shown above
are also available on request.
NOMINAL
ROPE DIA
CONSTR.
mm
8x37SF
38
40
Inch.
Kg./100m
kN
MT
1 - 1/2
639
708
754
780
856
936
1019
1106
1141
1196
1290
1387
1445
1488
1604
1712
1768
1812
2002
2185
2312
2379
2576
2810
3073
3299
981
1089
1148
1197
1344
1422
1550
1678
1727
1815
1962
2099
2188
2256
2433
2600
2688
2737
3012
3120
3296
3394
3561
3885
4248
4562
100
111
117
122
137
145
158
171
176
185
200
214
223
230
248
265
274
279
307
318
336
346
363
396
433
465
1 - 5/8
42
44
46
48
50
1 - 3/4
1 - 7/8
2
52
54
56
2 - 1/8
2 - 1/4
58
60
62
63
64
8x50SF 67
70
72
76
83
86
APPROX. MINIMUM BREAKING FORCE
MASS
2 - 3/8
2 - 1/2
2 - 5/8
2 - 3/4
2
3
3
3
3
- 7/8
- 1/8
- 1/4
- 3/8
Note:
‘PVF’ signifies fully Plasticated & Valley Filled
Sizes and breaking load values not shown above
are also available on request.
109
HOIST &
COMPENSATING
ROPE
HOIST &
COMPENSATING
ROPE
8 x 19S (9-9-1)
8 x 19S (9-9-1) + IWRC
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
MINIMUM BREAKING FORCE (KN)
mm
8
9
9.5
10
11
12
12.7
13
14
16
18
20
22
24
25.4
FIBRE CORE (CFN)
22.20
27.00
31.00
34.70
42.00
50.30
56.00
58.50
66.00
88.80
109.00
135.00
165.00
184.00
217.00
1570 or 1370 / 1770 N/mm2
28.10
36.20
39.80
44.00
53.20
64.00
71.50
74.80
86.20
113.00
141.00
178.00
213.00
233.00
254.00
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
MINIMUM BREAKING FORCE (KN)
mm
6.5
8
9
10
11
12
13
14
16
18
20
STEEL CORE (CFN)
16.10
24.00
30.70
38.50
46.60
55.10
65.60
75.30
98.40
123.00
153.00
1570 or 1370 / 1770 N/mm2
24.70
36.20
46.00
57.60
69.90
82.70
98.20
113.60
147.40
184.40
230.00
111
GOVERNOR
ROPES
POWERFORM 18
6/25F (12-6F+6-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
6
7
8
10
12
FIBRE CORE
12.5
18.0
22.1
35.2
49.8
kN
-
kN
19.6
29.5
34.8
54.4
78
kN
-
MINIMUM BREAKING FORCE
NOM.
ROPE
DIA
mm
NOM.
ROPE
DIA
in
6
7
8
9
10
11
12
1/2
13
14
15
16
17
18
8/19S (9-9-1)
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1570 N/mm2
1770 N/mm2
1960 N/mm2
mm
8
9.5
11
12.7
FIBRE CORE
22.2
31.0
42.0
56.0
kN
-
kN
28.1
39.8
53.2
71.5
kN
-
MINIMUM BREAKING FORCE
Note:
Measured rope diameter will be in the range of +2.5% to +5%
of nominal rope diameter under no-load condition
5/8
3/4
20
22
7/8
24
1
26
28
30
32
1-1/4
APPROX.
MASS
MINIMUM BREAKING FORCE
1960 N/mm2
2160 N/mm2
Kg./100m
kN
kN
17.5
23.8
31.0
39.3
48.5
58.7
69.8
78.2
82.0
95.1
109
124
140
157
175
194
235
240
279
313
328
380
437
497
29.4
38.0
51.8
64.6
80.8
101
116
135
141
160
182
209
237
266
291
320
379
387
462
517
542
632
721
820
111
127
148
155
177
201
232
262
295
322
359
424
433
523
585
613
710
809
920
Note:
‘P’ signifies full plastic impregnation of the steel core
Rope Sizes and Breaking Force not shown in the standard table
may be available on request and prior confirmation.
113
POWERFORM
35/35P
HYFLEX 18
NOM.
ROPE
DIA
mm
NOM.
ROPE
DIA
in
APPROX.
MASS
MINIMUM BREAKING FORCE
1960 N/mm2
2160 N/mm2
NOM.
ROPE
DIA
mm
Kg./100m
kN
kN
6
7
8
14.6
19.9
26.0
25.0
34.0
45.0
27.0
36.7
48.6
10
11
12
9
10
11
32.9
40.6
49.1
56.5
70.0
84.0
61.0
75.6
90.7
13
58.5
65.5
68.6
101
113
118
109
121
127
14
16
18
19
20
22
14
15
16
5/8
79.6
91.4
104
137
157
180
148
169
194
3/4
117
132
147
203
226
253
219
244
273
7/8
162
197
201
279
339
346
301
366
374
12
1/2
17
18
20
22
Note:
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
24
26
28
30
32
35
38
40
42
46
48
52
NOM.
ROPE
DIA
in
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
APPROX.
MASS
Kg./100m
50.3
60.7
72.9
81.1
98.6
129
163
182
201
243
249
290
325
340
394
411
453
515
616
726
805
887
994
1064
1159
1298
1360
MINIMUM BREAKING FORCE
1960 N/mm2
2160 N/mm2
kN
kN
90.5
111
131
148
180
233
300
331
372
444
453
531
591
621
720
748
827
944
1125
1326
1477
1485
1646
1765
1935
2150
2256
98.6
119
141
160
192
252
321
358
399
484
490
572
640
661
788
810
904
1035
1216
1437
1588
1620
1800
1930
2120
2325
2450
Note:
POWERFORM 35P is available on special request and prior confirmation.
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
Mass per unit length of Powerform 35P increases by approx. 3%.
Preferred construction 35x7 upto 42mm & 35x19S for higher sized.
115
LOCKED COIL
TRACK ROPES &
STRUCTURAL
ROPES
HYFLEX
35/35P
NOM.
ROPE
DIA
mm
10
12
14
16
19
20
22
24
26
28
30
32
35
36
38
42
44
48
52
NOM.
ROPE
DIA
in
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
APPROX.
MASS
Kg./100m
44.8
64.5
72.0
88.0
115
162
179
217
221
258
289
303
351
366
403
459
549
581
647
790
867
885
1032
1156
1211
MINIMUM BREAKING FORCE
1960 N/mm2
kN
76.0
107
123
148
194
277
301
370
376
441
491
517
599
621
679
769
945
983
1078
1227
1347
1375
1603
1796
1881
2160 N/mm2
kN
86.5
125
137
168
221
312
337
412
418
498
546
581
681
704
775
865
1044
1085
1205
Note:
‘P’ signifies full plastic impregnation of the steel core
HYFLEX 35P is available on special request and prior confirmation.
Rope Sizes and Breaking Force not shown in the standard table,
may be available on request and prior confirmation.
Mass per unit length of HYFLEX 35P increases by approx. 3%
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1370 N/mm2
1470 N/mm2
1570 N/mm2
mm
25
26
28
29
30
32
34
35
36
37
38
39
40
42
43
44
45
46
48
50
52
54
55
56
58
60
61
62
64
65
66
UNGALV.
350
379
440
472
505
574
648
687
727
768
810
853
897
989
1040
1090
1140
1190
1290
1400
1520
1640
1700
1760
1890
2020
2190
2260
2410
2480
2560
kN
520
562
652
699
748
851
961
1020
1080
1140
1200
1260
1330
1470
1540
1610
1680
1760
1920
2080
2250
2420
2520
2610
2800
2990
3240
3350
3570
3680
3790
kN
558
603
700
750
803
914
1030
1090
1160
1220
1290
1360
1430
1570
1650
1730
1810
1890
2060
2230
2410
2600
2700
2800
3000
3210
3480
3590
3830
3950
4070
kN
596
644
747
801
858
976
1100
1170
1230
1300
1380
1450
1520
1680
1760
1840
1930
2020
2200
2380
2580
2780
2880
2990
3210
3430
3710
3840
4090
4220
4350
MINIMUM BREAKING FORCE
* Heavy galvanized structural rope mass increases
by around 5%.
117
LOCKED COIL
TRACK ROPES &
STRUCTURAL
ROPES
LOCKED COIL
TRACK ROPES &
STRUCTURAL
ROPES
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1370 N/mm2
1470 N/mm2
1570 N/mm2
mm
68
69
70
72
74
75
76
77
78
79
80
82
84
86
88
89
90
92
94
96
97
98
99
100
101
102
103
UNGALV.
2720
2800
2880
3050
3220
3300
3390
3480
3570
3670
3760
3950
4150
4340
4550
4650
4760
5030
5250
5480
5590
5710
5820
5940
6060
6180
6300
kN
4030
4150
4270
4520
4770
4900
5030
5160
5300
5440
5580
5860
6150
6440
6750
6900
7060
7460
7780
8120
8290
8460
8630
8810
8990
9170
9350
kN
4320
4450
4580
4850
5120
5260
5400
5540
5690
5830
5980
6290
6600
6910
7240
7400
7570
8000
8350
8710
8890
9080
9270
9450
9640
9840
10000
kN
4620
4750
4890
5180
5470
5620
5770
5920
6070
6230
6390
6710
7040
7380
7730
7910
8090
8550
8920
9300
9500
9700
9900
10100
10300
10500
10700
MINIMUM BREAKING FORCE
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
1370 N/mm2
1470 N/mm2
1570 N/mm2
mm
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
130
135
140
UNGALV.
6430
6550
6680
6800
6930
7060
7190
7320
7450
7590
7720
7860
7990
8130
8270
8410
8560
8700
8840
8990
9140
9280
10200
11000
11800
kN
9530
9710
9900
10100
10300
10500
10700
10900
11100
11200
11400
11700
11900
12100
12300
12500
12700
12900
13100
13300
13500
13800
15100
16200
17500
kN
10200
10400
10600
10800
11000
11200
11400
11600
11900
12100
12300
12500
12700
12900
13200
13400
13600
13800
14100
14300
14500
14800
16200
17400
18700
kN
10900
11100
11300
11600
11800
12000
12200
12400
12700
12900
13100
13400
13600
13800
14100
14300
14500
14800
15000
15300
15500
15800
17300
18600
20000
MINIMUM BREAKING FORCE
* Heavy galvanized structural rope mass increases by
around 5%.
* Heavy galvanized structural rope mass increases by
around 5%.
119
LOCKED COIL
WINDING
ROPES
LOCKED COIL
GUIDE ROPES
NOM.
ROPE
DIA
APPROX.
MASS
Kg./100m
mm
UNGALV.
kN
16
18
19
20
21
22
24
25
26
27
28
29
30
32
34
35
36
37
38
39
40
42
44
46
48
51
54
57
60
148
188
209
232
256
281
334
363
392
423
447
479
513
584
659
698
739
780
823
867
912
1005
1104
1206
1313
1483
1662
1852
2052
208
264
294
326
359
394
469
509
550
593
638
685
733
834
941
997
1055
1114
1176
1238
1303
1436
1576
1723
1876
2117
2374
2645
2931
MINIMUM BREAKING FORCE
1570 N/mm2
NOM.
ROPE
DIA
APPROX. MASS
Kg./100m
mm
29
32
35
38
41
44
48
50
54
UNGALV. / GALV.
456
558
711
840
977
1125
1339
1453
1696
MINIMUM BREAKING FORCE
700 - 900 N/mm2
kN
319
387
473
560
666
772
879
1004
1159
800 - 950 N/mm2
kN
386
473
580
686
811
937
1081
1229
1419
Note:
All intermediate sizes are also available
Note:
All intermediate sizes are also available
121
WHY
USHA MARTIN
ROPE?
Guaranteed Raw Material Quality
Developed, manufactured and quality certified by
own Steel Plant.
Tailor made raw materials to ensure consistent rope
quality and desired end-properties
Guaranteed Product Quality
State-of-the-art pickling plant.
State-of-the-art patenting furnaces.
Latest generation wire-drawing machinery
Computerised rope design.
QUALITY POLICY
“Our quality policy is to fulfil customers’ requirement
through reliable products and services meeting all
regulatory requirements and through continual
improvement of our quality management system.”
TPM POLICY
“It is our policy to induce change in all employees by
delegation, empowerment and motivation to achieve total
participation towards zero accident, zero defect and zero
failure.”
In-house developed rope making machinery for
manufacturing high-performance ropes.
Breaking load and fatigue test equipment to guarantee
desired performance and quality.
Guaranteed Quality systems
ISO 9001:2008
API
OTIS
ABS
LLOYDS
NKK
JIPM
Robust Process Control
Qualified supervisors & operators trained in own
institution on product process and equipment.
Regular training of operations staff at HRD centre.
Visual display of process parameters at each stage
of processing.
Stringent quality control at every stage of
manufacturing.
123
HOW TO
ORDER A
ROPE
HOW TO
IDENTIFY
USHA MARTIN
ROPE
Nominal Diameter and tolerance.
Construction/Class/Brand Name.
Finish (galvanised or ungalvanised)
Tensile Strength
Minimum Breaking load requirement.
Core – Fibre/IWRC/WSC.
Lay - eg. Right hand regular lay.
Lubrication
Packing – wooden reel/steel reel/coils.
Particulars of fittings
Preformed /Non-preformed
Exact length per reel / coil etc
( special length tolerance, if any)
Delivery time
Special requirements
Pre-stretching
Packaging
Identification
Third-party inspection
Note:
It is always important to state the application of the rope other
than the above points to ensure correct rope for your purpose or
find out more at www.ushamartin.com
Every genuine Usha Martin rope has this
identification tape inside
125
SAFETY
INFORMATION
Wire rope will fail if worn out, shock loaded,
overloaded, misused, damaged, improperly
maintained or abused.
Always inspect wire rope for wear, damage
or abuse before use.
Never use a wire rope which is worn out,
damaged, corroded or abused.
Never overload or shock load a wire rope.
Use the correct design factor for the
application.
Inform yourself : Read and understand the
machinery manufacturers handbook and
guidance from the wire rope manufacturer.
Refer to applicable directives, regulations,
standards and codes concerning inspection,
examination and rope removal criteria.
All statements, technical information and
recommendations contained herein are believed to be
reliable, but no guarantee is given as to their accuracy
and/or completeness. The user must determine the
suitability of the product for his own particular purpose,
either alone or in combination with other products and
shall assume all risk and liability in connection therewith.
Whilst every attempt has been made to ensure accuracy
in the content of the tables, the information contained
in this catalogue does not form any part of a contract.
METRIC – IMPERIAL DIAMETER CONVERSION
in.
mm.
in.
mm.
in.
mm.
5/
32
3.97
4.76
5.56
6.35
15/
16
1
11/16
11/8
23.8
25.4
27.0
28.6
21/2
23/4
3
31/4
63.5
69.9
76.2
82.6
7/
16
7.94
9.53
11.1
13/16
11/4
13/8
30.2
31.8
34.9
31/2
33/4
4
88.9
95.3
101.6
1/
2
12.7
11/2
38.1
14.3
15.9
17.5
15/16
13/4
17/8
41.3
44.5
47.6
41/4
41/2
43/4
5
108.0
114.3
120.7
127.0
19.0
20.6
22.2
2
21/8
21/4
50.8
54.0
57.2
3/
16
7/
32
1/
4
5/
16
3/
8
9/
16
5/
8
11/
16
3/
4
13/
16
7/
8
CONVERSION TABLE
Length
1m
= 1000 mm
= 3,281ft
= 39,37 inch
Force
1kN
= 101,97kp
= 0,10197 MT-f
= 224lbs-f
Tensile
Strength
1N/mm2
= 0,10197
kp/mm2
= 145,04 p.s.i.
= 10 bar
Cross
Section
1 mm2
= 0,00155 in2
Weight
1 metric t
= 1000 kg
= 1,102 short t = 0,9842 long t
Weight per
Length Unit 1 kg/m
= 2204,6 lbs
= 0,672 lbs/ft 127
NATIONAL
PRESENCE
CHANDIGARH
HOSHIARPUR
JAIPUR
LUDHIANA
DELHI
RANCHI
GHAZIABAD
INDORE
FARIDABAD
RAJKOT
KOLKATA
JAMSHEDPUR
SILVASA
MUMBAI
NAGPUR
PUNE
CHENNAI
BANGALORE
MADURAI
Manufacturing
Facilities
Sales Office
Corporate Office
129
INTERNATIONAL
PRESENCE
131
WHERE TO
CONTACT US
Domestic Offices
East Regional Office
USHA MARTIN LIMITED
2A, Shakespeare Sarani
‘Mangal Kalash’
Kolkata – 700071
Phone: +91 33 3980 0300/ 0458
Fax: +91 33 2282 9029/ 3980 0500
Email: [email protected]
South Regional Office
USHA MARTIN LIMITED
Plot No. L9 (1), Phase-II
Sipcot Industrial Park, Sriperumbudur
Kancheepuram - 602105
Chennai, Tamilnadu
Phone: +91 44 3717 5100 (24 Lines)
Fax: +91 44 3717 5200
Email: [email protected]
North Regional Office
USHA MARTIN LIMITED
701, ‘Surya Kiran’
19, Kasturba Gandhi Marg
New Delhi – 100 001
Phone: +91 11 2331 5156 / 5157 / 5158
2371 1232 / 2371 5220
Fax: +91 11 2332 0723 / 5586
Email: [email protected]
West Regional Office
USHA MARTIN LIMITED
168, CST Road,
Agarwal Industrial Estate
Kalina, Santa Cruz (E)
Mumbai – 400 098
Phone: +91 22 3064 5400
Fax: +91 22 2652 6774
Email: [email protected]
Overseas Offices
USHA MARTIN UK LIMITED
Tasman House, Mariner Court
Clydebank, Glasgow, UK G81 2NR, UK
Tel: + 44 (0)141 951 8801
Fax: + 44 (0) 141 951 8802
Email: [email protected]
EUROPEAN MANAGEMENT & MARINE CORP.
Howe Moss Place, Kirkhill Industrial Estate
Dyce, Aberdeen AB 21 OGS, Scotland, U.K
Ph: +44 1224 77 5151
Fax: +44 1224 775252
Email: [email protected]
BRUNTON SHAW UK
(A Division of Usha Martin UK Limited)
Sandy Lane, Workshop, S80 3ES, UK
Tel: + 44 1909 537 600
Fax: + 44 1909 500 199
Email: [email protected]
DE RUITER STAALKABEL B.V.
Ringerstraat 7, 3164 BA, Sliedrecht
Holland
Tel: + 31 (0)184 49 9999
Fax: +31 (0) 184 41 8351
Email: [email protected]
USHA MARTIN AMERICAS, INC
701 Plastics Avenue, Houston
Texas 77020, USA
Ph: +1 713 676 1800
Fax: +1 713 676 1166
Email: [email protected]
133
WHERE TO
CONTACT US
USHA MARTIN AUSTRALIA PTY LTD
Unit 2/ 468-470, Victoria Street
St.Wetherill Park, NSW 2164, Australia
Ph: +61 296 094971
Fax: +61 297 566516
Email: [email protected]
BRUNTON WOLF WIRE ROPES FZCO
P.O. Box. 17491, M00301
Jebel Ali Free Zone, Dubai, U.A.E
Tel: + 971 04 8838151
Fax: + 971 04 8838152
Email: [email protected]
USHA MARTIN SINGAPORE PTE LIMITED
91 Tuas Bay Drive, Usha Martin Building,
Singapore – 637307
Ph: +65 6265 7756
Fax: +65 6265 7226
Email: [email protected]
USHA SIAM STEEL INDUSTRIES PUBLIC CO. LTD
209 K-Tower-B, 22nd Floor, Unit 3/1
Sukhumvit 21 Road (Asok)
Bangkok - 101110, Thailand
Te l: +662 261 7361 to 64
Fax: +662 640 8227
Email: [email protected]
USHA MARTIN VIETNAM CO. LTD
823 Huynh Tan Phat, Hamlet 6
Phu Xuan Commune Nha Be District
Ho Chi Minh City, S.R Vietnam
Tel: +84 8 3781 8196
Fax: +84 8 3781 8171
HP: +84 903702469
Email : [email protected]
PT. USHA MARTIN INDONESIA
Konica Building 3A Fl
Jl. Gunung Sahari Raya 78
Jakarta 10610 - Indonesia
Ph: +62 21 42870794
Fax: +62 21 42870795
Email: [email protected]
USHA MARTIN EUROPE B.V.
Leerlooierstraat 3
2984 BK Ridderkerk
Holland
Phone: +31 (0)180 74 50 99
Mobile: +31 (0)635 11 29 31
E-mail: [email protected]
USHA MARTIN CHINA CO. LTD.
No. 122, East FuTe No. 1 Rd. Wai Gao Qiao Free Trade Zone,
Shanghai, P.R. China (Shanghi) Pilot Free Trade Zone,
Postal Code: 200131
Tel: +86 21 6858 8699
Fax: +86 21 6858 8711
Email: [email protected]
135
NOTE
NOTE
137
NOTE
NOTE
139
NOTE
NOTE
141