Ceramco 3Press Flyer GB

Porcelain pressed to metal system
Press, stain
Casting and finishing
a structure made using
a conventional PFM alloy
Opaquing with the Ceramco 3
Press Opaque
Re-waxing or duplicating the
aesthetic part on the metal
structure
Porcelain pressed to metal system
0086
The Ceramco® 3 Press is a new pressable
porcelain system to work with Ceramco® 3
porcelain to reach maximum aesthetics!
The Ceramco 3 Press ingots are a blend
of dentin and enamel porcelains that are
color-coordinated with a special paste
opaque. This system is designed to be
pressed over metal to a full contour
design, then stained and glazed. These
components may be used to quickly
fabricate aesthetic porcelain pressed to
metal single and multiple unit fixed
partial dentures.
A new system with the traditional properties of Ceramco Porcelains: a special
Press Opaque assures an excellent
adhesion.
Invest like an
All- Ceramic System
(Finesse or others)
and go!
High Aesthetics
+ No Shrinkage
+ Perfect Fit
= Beautiful & Easy
Detail of the bridge obtained
with Ceramco 3 Press ...
Do you know something
easier and faster? What you
wax is what you get!
Several tests performed the
excellent adhesion & total
absence of porosities.
Photos courtesy of Pier Giorgio Bozzo, Italy
What you wax is what you get!
Technical benefits
Economical benefits
• No shrinkage (what you press is
what you get)
• More than 20 % time saving *
• Low investment
• Creating margins easily
• Overpressing of the dentin core
at the same time
• Quick and easy enamel
layering possible
• Full anatomic pressing for optimal
gnathology
• Excellent bonding strength
* in comparison to a standard
layer technique
22119/0510/H
Porcelain pressed to metal system
DENTSPLY International Inc.
570 West College Ave.
York, PA 17405-0872
USA
International Phone: 717-845-7511
www.ceramco.com or
www.dentsply.com
DeguDent GmbH
Rodenbacher Chaussee 4
63457 Hanau-Wolfgang
GERMANY
www.dentsply-degudent.com