D-1 Small Tool Instruments and Data Management Digimatic

Transcription

D
Small Tool Instruments and
Data Management
INDEX
Caliper
SuperCaliper
ABSOLUTE Solar Caliper
ABSOLUTE Coolant Proof Caliper
ABSOLUTE Digimatic Caliper
Vernier Caliper
ABSOLUTE Digimatic & Vernier Caliper
Dial Caliper
ABSOLUTE Coolant Proof Carbon Fiber Caliper
Vernier Caliper (Nib Style Jaws)
Long Jaw Vernier Caliper
Offset Caliper
Offset Centerline Caliper
ABSOLUTE Back-Jaw Centerline Caliper
Point Caliper
Blade Type Caliper
Neck Caliper
ABSOLUTE Inside Caliper
Tube Thickness Caliper
Hook Type Vernier Caliper
Swivel Vernier Caliper
ABSOLUTE Low Force Caliper
ABSOLUTE Snap Caliper
Scribing Caliper
Plastic Caliper
Height Gages
Heightmatic
Digimatic Height Gage
ABSOLUTE Digimatic Height Gage
Dial Height Gage
Vernier Height Gage
CERA Caliper Checker
Carbide-tipped Scriber
Optional Accessories
Linear Height
Linear Height
QM-Height
Depth Gages
Depth Micrometer
Depth Micro Checker
ABSOLUTE Digimatic Depth Gage
Vernier Depth Gage
Depth Gage
Dial Depth Gage
Extension Bases
ABSOLUTE Digimatic/Dial Depth Gage
Tire Tread Depth Gage
Depth Base Attachment
Digimatic Caliper
Digimatic
Height Gages
Linear Height
Depth Gages
SuperCaliper
ABSOLUTE
Coolant Proof Caliper
ABSOLUTE
Digimatic Caliper
ABSOLUTE
Digimatic Offset Caliper
Digimatic Height
Gage
D-1
D-2
D-3
D-4
D-6
D-8
D-12
D-13
D-14
D-15
D-18
D-19
D-20
D-21
D-22
D-23
D-24
D-25
D-26
D-28
D-29
D-29
D-30
D-30
D-31
D-32
D-33
D-34
D-36
D-38
D-40
D-42
D-43
D-43
D-44
D-46
D-48
D-49
D-50
D-51
D-52
D-53
D-53
D-54
D-56
D-56
D
D
D
SuperCaliper
SERIES 500 — No battery or origin reset needed for IP67 digital caliper
FEATURES
•World’s unique* solar-powered
SuperCaliper that is eco-friendly with no
battery
•With no annoying origin restoration
necessary, a measurement can be started
any time and there is no restriction on
operating speed.
*According to Mitutoyo research in January, 2005
•The impact resistance of the display unit
has been increased for improved usability
in workshop conditions.
•IP67 protection assures waterproof
reliability.
•This SuperCaliper uses components that
do not contain harmful substances and is
compatible with RoHS Directives.
High quality guide surface finish for
smooth slider movement
Sufﬁcient
illumination state
16.78mm
Conventional
No need for
orgin set up
0
8
3
Insufﬁcient
illumination state
(Refer to page VIII for details.)
0 0the
6 6 VIII for details.)
0 0 0page
(Refer to
Technical Data
SuperCaliper
Direction of the length
Ra: 0.126µm
Ra: 0.07µm
Accuracy: ±0.02mm (excluding quantizing error)
Resolution: 0.01mm or .0005"/0.01mm
Repeatability:0.01mm
Display:
LCD
Scale type: ABSOLUTE electromagnetic linear encoder
Max. response speed: Unlimited
Battery:
Solar battery*
Dust/Water protection level: IP67
*Can be used continuously above 60lux ambient illumination.
Functions
Origin-set, inch/mm conversion (inch/mm models)
Alarm:
Counting value composition error
500-774
D
05CZA624: SPC cable with data switch (1m)
02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)
IP67 protection level
Level 6:
Level 7:
SPECIFICATIONS
Metric
Inch/Metric
Order No.
500-776
500-774
500-777
500-775
Range
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
Remarks
with data output
w/o data output
with data output
w/o data output
Range
0 - 6"
0 - 6"
0 - 8"
0 - 8"
Order No.
500-786
500-784
500-787
500-785
Remarks
with data output
w/o data output
with data output
w/o data output
Dust-tight
No ingress of dust.
Protected against the effects of temporary
immersion in water.
Ingress of water in quantities causing harmful
effects shall not be possible when the enclosure
is temporarily immersed 1 meter in water under
standardized conditions of pressure and time (30
min.).
1m
DIMENSIONS
Unit: mm
d
b
Jaw thickness: 3.5mm
D-2
About the charge function (SuperCaliper)
The minimum illumination required in the uncharged state is
60lux. As shown in the table ‘JIS Z 9110 Artificial Illumination Intensity Standard’, this SuperCaliper can be used with
confidence in a normal work environment.
Range
0 - 150mm/0 - 6”
0 - 200mm/0 - 8”
c
a
L
L
233
290
a
21
24.5
b
16.5
20
c
40
50
d
16
16
The charge function allows the operator to use this
SuperCaliper without interrupting work even if the ambient
illumination is temporarily insufficient.
•In the fully charged state this SuperCaliper can operate
for approximately an hour in an environment of 50lux
illumination (less than the minimum necessary illumination
intensity).
•The time necessary for full charge differs, depending on
the charging conditions. If this SuperCaliper is left unused
in an illumination of 500 lux (usual for manufacturing
environments), it takes approximately one hour to reach
full charge.
SERIES 500 — No battery or origin reset needed
FEATURES
Mitutoyo's Absolute Solar Digimatic Caliper
retains its origin point even if the display
turns off for the entire life of the caliper.
At 60 Lux and adove the ABSOLUTE
solar caliper is turned on ready to start
measurement.
•No more repeated zero setting caused by a
shortage of light intensity.
•Hard-coated solar panel for safe operation.
•No fear of overspeed errors.
Conventional
Sliding direction
Sliding direction
Ra: 0.126µm
Ra: 0.071µm
500-444
Technical Data
959143: Data hold unit
959149: SPC cable with data switch (1m)
Order No.
500-443
500-453*
500-444
500-454*
500-445
500-455*
Depth bar
ø1.9mm rod
ø1.9mm rod
Blade
Blade
Blade
Blade
Fine adjustment
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
Order No.
500-463
500-473*
500-464
500-474*
500-465
500-475*
Depth bar
ø3/40" rod
ø3/40" rod
Blade
Blade
Blade
Blade
Fine adjustment
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
D
*without SPC data output
Inch/Metric
Range
0 - 4"
0 - 4"
0 - 6"
0 - 6"
0 - 8"
0 - 8"
DIMENSIONS
Unit: mm
L
16
Origin-set, Data hold, Data output, inch/mm conversion (inch/
mm models)
Alarm:
Counting value composition error
Range
0 - 100mm
0 - 100mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
c
Functions
Metric
b
*Can be used continuously above 60lux ambient illumination.
SPECIFICATIONS
a
Accuracy: ±0.02mm (excluding quantizing error)
Display:
LCD
Scale type*: ABSOLUTE electrostatic linear encoder
Battery:
Solar battery*
Range
0 - 100mm/0 - 4”
0 - 150mm/0 - 6”
0 - 200mm/0 - 8”
D-3
L
182
233
290
a
40
40
50
b
21
21
24.5
c
16.5
16.5
20
SERIES 500 — with Dust/Water Protection Conforming to IP67 Level
FEATURES
•Automatic power-on/off.
•Data output function.
Conventional
Sliding direction
Sliding direction
Ra: 0.126µm
Ra: 0.071µm
500-712-10
2
40
0
•Can be used in workshop conditions
exposed to coolant, water, dust or oil.
•Easy to use — no need to wipe or clean
the scale.
•Advanced design styling.
•Incorporates absolute measurement
system.
2 0 7 VIII for details.)
(Refer 0to1 1page
500-752-10
D
500-763-10
Technical Data
Built-in ABS (absolute) scale means that these calipers are ready to use immediately after poweron without origin resetting. It’s as easy as vernier caliper measurements.
Accuracy: ±0.02mm (≤200mm), ±0.03mm (>200mm)
(excluding quantizing error)
Display:
LCD
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3 years under normal use
(1 year: over 300mm models)
Functions
Power OFF
Power ON
16.38
No origin
resetting
Measurement data output
function is available with a waterresistant SPC cable.
Certificate of inspection
Origin-set, Zero-setting, Automatic power on/off, Data
output, inch/mm conversion (inch/mm models)
Alarm:
Low voltage, Counting value composition error
05CZA624
D-4
Air leakage detection system used for
water-proof testing
Generally, air leakage tests are performed to evaluate water
resistance. Testing begins by placing a measuring tool into
the capsule. Next, air at the required test pressure is supplied
to the capsule and the master capsule, then the valves
are closed. If none of the air in the capsule seeps into the
measuring tool, the capsule’s air pressure will remain equal
to that in the master, and the differential pressure gauge will
continue to point to the center. However, if some air does
seep into the measuring tool, it will create an air pressure
difference that will be indicated by the differential pressure
gauge. Thus, detection of air pressure differences is used
as a criterion for judging leakage. Every single unit of ABS
Coolant Proof caliper and Coolant Proof micrometer is tested
this way to help ensure product quality.
Air
Valve
Valve
Master
Capsule
Differential
pressure gauge
SPECIFICATIONS
Metric
Range
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 300mm
0 - 300mm
0 - 300mm
Order No.
500-702-10*
500-712-10
500-706-11*
500-716-11
500-709-11*
500-719-10
500-721-10
500-723-10
500-727-11
500-703-10*
500-713-10
500-707-11*
500-717-11
500-722-10
500-724-10
500-728-11
500-714-10
500-718-11
500-704-10*
500-708-11*
Depth bar
Blade
Blade
Blade
Blade
ø1.9mm rod
ø1.9mm rod
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Fine adjustment
with thumb roller
with thumb roller
—
—
—
with thumb roller
with thumb roller
with thumb roller
—
with thumb roller
with thumb roller
—
—
with thumb roller
with thumb roller
—
with thumb roller
—
with thumb roller
—
Remarks
—
—
—
—
—
—
Carbide-tipped jaws for outside measurement
Carbide-tipped jaws for outside and inside measurement
—
—
—
—
—
—
—
—
Depth bar
Blade
Blade
ø3/40” rod
ø3/40” rod
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Fine adjustment
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
Remarks
—
—
—
—
Carbide-tipped jaws outside and inside measurement
—
—
—
—
Inch/Metric
Level 6:
Level 6:
Dust-tight
No ingress of dust.
Protected against powerful water jets.
Water projected in powerful jets* against the
enclosure from any direction shall have no
harmful effects.
*Size of direct jets: 12.5 mm (inner diameter) nozzle
emitting a 100 kPa jet of water at 100 liters per
minute for at least 3 minutes from a distance of
approx. 3 meters.
Range
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 8"
0 - 8"
0 - 8"
0 - 8"
0 - 8"
0 - 8"
0 - 12"
0 - 12"
Order No.
500-752-10*
500-762-10
500-768-10*
500-769-10
500-731-10*
500-735-10
500-733-10*
500-737-10
500-753-10*
500-763-10
500-732-10*
500-736-10
500-734-10*
500-738-10
500-764-10
500-754-10*
DIMENSIONS
Unit: mm
L
c
d
Level 7:
Dust-tight
No ingress of dust.
Protected against the effects of temporary
immersion in water.
Ingress of water in quantities causing harmful
effects shall not be possible when the enclosure
is temporarily immersed 1 meter in water under
standardized conditions of pressure and time (30
min.).
a
Level 6:
b
1m
Range
0 - 150mm/0 - 6”
0 - 200mm/0 - 8”
0 - 300mm/0 - 12”
D-5
L
233
290
404
a
40
50
64
b
21
24.5
27.5
c
16.5
20
21.8
d
16
16
20
D
SERIES 500 — with Exclusive ABSOLUTE Encoder Technology
Mitutoyo's absolute Digimatic Caliper is
the next generation of electronic calipers.
It keeps track of its origin point once set.
Whenever turned on, the large LCD screen
displays the actual slider position ready to
start measurement. No more repeated zero
setting is necessary with absolute encoder
technology as well as no no more concerns
about overspeed errors.
High quality guide surface finish for smooth
slider movement
Conventional
ABS Digimatic Caliper
Ra: 0.126µm
Ra: 0.071µm
FEATURES
•Large and clear LCD readout.
•The ZERO/ABS key allows the display to
be Zero-Set at any slider position along
the scale for comparison measurements.
This switch will also allow return to the
absolute (ABS) mode and display of the
true position from the origin (usually jawsclosed point).
•Data Hold Unit (959143) is optional.
•Carbide-tipped jaw type calipers are also
available.
*Up to 300mm/12” range models.
500-150-20
D
Technical Data
Accuracy: ±0.02mm (≤200mm), ±0.03mm (≤300mm)
±0.05mm (≤600mm), ±0.07mm (≤1000mm)
Display:
LCD
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
500-181-20
DIMENSIONS
Functions
Unit: mm
b
c
L
Origin-set, Zero-setting, Data output, inch/mm conversion
(inch/mm models)
Alarm:
d
a
Range
0 - 100mm/0 - 4”
0 - 150mm/0 - 6”
0 - 200mm/0 - 8”
0 - 300mm/0 - 12”
L
182
233
290
404
a
40
40
50
64
b
21
21
24.5
27.5
c
16.5
16.5
20
22
d
16
16
16
20
02AZD790C: SPC cable for U-WAVE w/ data switch (160mm)
959143
c
959149
d
b
L
a
Range
0 - 450mm/0 - 18”
0 - 600mm/0 - 24”
0 - 1000mm/0 - 40”
D-6
L
630
780
1240
a
90
90
130
b
47
47
61
c
38
38
50
d
25
25
32
SPECIFICATIONS
Metric
Range
0 - 100mm
0 - 100mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 450mm
0 - 600mm
0 - 1000mm
Order No.
500-150-20
500-180-20*
500-151-20
500-154-20
500-155-20
500-158-20
500-181-20*
500-152-20
500-156-20
500-157-20
500-182-20*
500-153
500-500-10
500-501-10
500-502-10
Depth bar
ø1.9mm rod
ø1.9mm rod
Blade
Blade
Blade
ø1.9mm rod
Blade
Blade
Blade
Blade
Blade
Blade
—
—
—
Fine adjustment
with thumb roller
—
with thumb roller
with thumb roller
with thumb roller
with thumb roller
—
with thumb roller
with thumb roller
with thumb roller
—
with thumb roller
—
—
—
Remarks
—
—
—
—
—
—
—
—
—
—
—
Depth bar
ø3/40" rod
ø3/40" rod
Blade
Blade
Blade
ø3/40" rod
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
—
—
—
Fine adjustment
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
with thumb roller
—
—
—
—
—
Remarks
—
—
—
—
—
—
—
—
—
—
—
—
Inch/Metric
Range
0 - 4"
0 - 4"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 6"
0 - 8"
0 - 8"
0 - 8"
0 - 8"
0 - 8"
0 - 8"
0 - 12"
0 - 12"
0 - 12"
0 - 12"
0 - 12"
0 - 12"
0 - 18"
0 - 24"
0 - 40"
Order No.
500-170-20
500-195-20*
500-171-20
500-174-20
500-175-20
500-178-20
500-196-20*
500-159-20*
500-160-20*
500-172-20
500-176-20
500-177-20
500-197-20*
500-163-20*
500-164-20*
500-173
500-167
500-168
500-193*
500-165*
500-166*
500-505-10
500-506-10
500-507-10
500-502-10
500-501-10
500-500-10
D-7
D
Vernier Caliper
SERIES 530 — Standard model
FEATURES
•Plain and basic design.
•Can measure outside and inside diameter
(OD and ID), depth, and steps.
•The small vernier face angle (14°) provides
easy reading.
•Different reading scales on vernier.
(metric/inch and inch models only)
•Clamping screw atop the slider.
•Carbide-tipped jaw type calipers are also
available.
Technical Data
Accuracy:
Graduation:
14°
530-101
D
530-100
Carbide-tipped
Carbide-tipped jaw type
Round depth bar type
DIMENSIONS
Unit: mm
d
c
b
L
a
Range
0 - 100mm
0 - 150mm
0 - 200mm
0 - 300mm
0 - 600mm
0 - 1000mm
D-8
L
182
229
288
404
780
1240
a
40
40
50
64
90
130
b
21
21
24.5
27.5
47
60
c
17
17
20.5
22
38
50
d
16
16
16
20
25
32
±0.05mm (≤200mm), ±0.08mm (≤300mm)
±0.10mm (≤600mm), ±0.15mm (≤1000mm)
High accuracy type:
±0.03mm (≤200mm), ±0.04mm (≤300mm)
0.05mm, 0.05mm (1/128”) or .001” (1/128”)
High accuracy type:
0.02mm or 0.02mm (.001”)
Measurement Applications
SPECIFICATIONS
Metric
OD measurement
Range
0 - 100mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 300mm
0 - 300mm
0 - 600mm
0 - 1000mm
Order No.
530-100
530-102
530-101
530-320
530-335
530-122*
530-108
530-321
530-123*
530-109
530-322
530-124*
530-501
530-502
Depth bar
ø1.9mm rod
ø1.9mm rod
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Blade
—
—
Remarks
—
—
—
High accuracy model: ±0.03mm
—
—
—
—
*Graduation: 0.02mm
Metric/Inch
ID measurement
Range
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 300mm
with metric/inch double scale
Order No.
530-104
530-316
530-312*
530-114
530-118*
530-115
530-119*
Depth bar
Blade
Blade
Blade
Blade
Blade
Blade
Blade
Inch graduation
1/128"
1/128"
.001"
1/128"
.001"
1/128"
.001"
Remarks
—
Clamping screw below the slider
—
—
Inch graduation
1/128"
1/128"
Remarks
—
—
*Graduation: 0.02mm
Inch
with inch/inch double scale
Order No.
530-105
530-116
Range
0 - 6"
0 - 8"
Depth bar
Blade
Blade
D
Step measurement
Vernier Caliper
SERIES 536 — Parallax-Free Type
FEATURES
•Parallax-free vernier scales for easy and
positive measurement.
SPECIFICATIONS
536-310
Metric
Range
0 - 150mm
Technical Data
Order No.
536-310
Depth bar
Blade
Remarks
Left-handed type
DIMENSIONS
Accuracy: ±0.05mm
Graduation: 0.05mm
L
a
d
c
Unit: mm
b
Depth measurement
•With clamping screw atop the slider.
•Special model (Series 536) is designed for
left-handed users.
Range
L
a
0 - 150mm 229 40
b
21
c
d
16.5 16
D-9
Vernier Caliper
SERIES 532 — with Fine Adjustment
FEATURES
•Fine-adjustment aids slider positioning.
Technical Data
532-101
Accuracy: ±0.03mm (≤180mm), ±0.04mm (≤280mm)
Graduation: 0.02mm, 0.02mm (.001”) or .001” (1/128”)
SPECIFICATIONS
Metric
Order No.
532-101
532-102
532-103
Range
0 - 130mm
0 - 180mm
0 - 280mm
Metric/Inch
Remarks
with fine adjustment
Order No.
532-119
532-120
532-121
Range
0 - 130mm
0 - 180mm
0 - 280mm
Depth bar
Blade
Blade
Blade
Inch graduation
.001"
.001"
.001"
Remarks
DIMENSIONS
Unit: mm
d
c
b
L
Range
0 - 130mm/0 - 5”
0 - 180mm/0 - 7”
0 - 280mm/0 - 11”
a
D
Depth bar
Blade
Blade
Blade
D-10
L
229
288
404
a
40
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
Vernier Caliper
SERIES 531 — with Thumb Clamp
FEATURES
•The slider moves only when the springloaded thumb grip is depressed.
Technical Data
Accuracy:
Graduation:
Refer to the list of specifications.
0.05mm, 0.05mm (1/128”) or .001” (1/128”)
High accuracy type:
0.02mm or 0.02mm (.001”)
531-101
Thumb grip
SPECIFICATIONS
DIMENSIONS
Unit: mm
L
d
30
c
53.5
b
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
Metric/Inch
a
L
229
288
403
a
40
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
Accuracy
±0.05mm
±0.05mm
±0.08mm
Depth bar
Blade
Blade
Blade
Remarks
—
—
—
*Graduation: 0.02mm
0 - 150mm
Order No. Accuracy Depth bar Inch
graduation
531-122
±0.05mm Blade
1/128"
0 - 150mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 300mm
531-128*
531-108
531-129*
531-109
531-112*
Range
Range
0 - 150mm/0 - 6”
0 - 200mm/0 - 8”
0 - 300mm/0 - 12”
Order No.
531-101
531-102
531-103
±0.03mm
±0.05mm
±0.03mm
±0.08mm
±0.04mm
Blade
Blade
Blade
Blade
Blade
.001”
1/128"
.001”
1/128"
.001”
Remarks
with inch/mm
conversion label
High accuracy model
—
High accuracy model
—
High accuracy model
*Graduation: 0.02mm
Vernier Caliper
SERIES 522 — Parallax-Free Type
FEATURES
Technical Data
Accuracy: Refer to the list of specifications.
Graduation: 0.05mm (1/128”)
High accuracy type: 0.02mm (.001”)
•The main and vernier scales are flush-fitted
to eliminate parallax errors because of the
diamond-shape (octagonal) cross section
of the main scale.
•With locking screw below the slider.
522-602
DIMENSIONS
SPECIFICATIONS
Unit: mm
Metric
Range
0 - 150mm
0 - 150mm
15
17
22
229
Order No. Accuracy
522-600
±0.05mm
522-606* ±0.03mm
*Graduation: 0.02mm
Metric/Inch
40.5
Depth bar Remarks
Blade
—
Blade
High accuracy model
Range
0 - 150mm
0 - 150mm
Order No. Accuracy
522-601
±0.05mm
522-602* ±0.03mm
*Graduation: 0.02mm
D-11
Depth bar Inch resolution Remarks
Blade
1/128"
—
Blade
.001”
High accuracy model
D
ABSOLUTE Digimatic & Vernier Caliper
SERIES 550, 160 — with Nib Style Jaws
FEATURES
•Parallax-free vernier scale type is available
for easy and positive measurement (Series
160).
Vernier
graduations
•SPC output
(Series 550).
Main scale
•The rounded faces of the jaws are ideal for
accurate inside diameter (ID) measurement.
•Inside and outside measurements can be
read directly from the upper and lower
vernier scales (Series 160).
•Fine-adjustment type is available (Series
160).
graduations
Parallel scale faces
201
160-130
Metric
Digital model
Range*
Order No.
0 - 200mm (10 - 210mm)
550-301-10
0 - 300mm (10 - 310mm)
550-331-10
0 - 450mm (20 - 470mm)
550-203-10
0 - 600mm (20 - 620mm)
550-205-10
0 - 1000mm (20 - 1020mm) 550-207-10
Accuracy
±0.03mm
±0.04mm
±0.05mm
±0.05mm
±0.07mm
Remarks
IP67
IP67, with offset/preset function for easy inside measurement
—
—
—
*( ): Inside measurement
Inch/Metric
Digital model
Order No.
550-311-10
550-341-10
550-223-10
550-225-10
550-227-10
Range*
0 - 8" (.4” - 8.4”)
0 - 12" (.4” - 12.4”)
0 - 18" (.5” - 18.5”)
0 - 24" (.5” - 24.5”)
0 - 40" (1” - 41”)
1207
Technical Data
SPECIFICATIONS
(excluding quantizing error for digital models)
Resolution*: 0.01mm or .0005"/0.01mm
Graduation**: 0.02mm
Display*: LCD
Max. response speed*: Unlimited
Battery*: SR44 (1 pc.), 938882
Battery life*:Approx. 3 years under normal use
(1 year: 300mm models)
(3.5 years: over 300mm models)
Dust/Water protection level*: IP67 (models up to 300mm)
*Digital models **Analog models
Functions of Digital Model
(inch/mm models)
Alarm:
Optional Accessories for Digital Model
Accuracy
±.0015"
±.002"
±.002"
±.002"
±.003"
Remarks
IP67
—
—
—
05CZA624: SPC cable with data switch (1m)*
02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)*
*For IP67 models (up to 300mm)
*( ): Inside measurement
Metric
with metric/metric double scale
Range*
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
Order No.
160-130
160-131
160-132
Accuracy
±0.10mm
±0.10mm
±0.15mm
Remarks
—
—
—
*( ): Minimum dimension in inside measurement
DIMENSIONS
Series 551 / 533
Unit: mm
d
b
40.5
50.5
65
65
95
c
8
12
18
18
24
R
5
5
10
10
10
D-12
a
a
60
75
100
100
140
c
c
R
Range
0 - 200mm
0 - 300mm
0 - 450mm
0 - 600mm
0 - 1000mm
b
a
Series 550 / 160
b
D
40
0
550-301-10
R
Range
0 - 200mm
0 - 300mm
0 - 450mm
0 - 600mm
0 - 1000mm
a
60
90
150
150
150
b
43
68
115
115
115
c
8
10
15
15
20
d
30
40.1
56
56
56
R
5
5
10
10
10
Round surface of
jaws for accurate CD
measurement
SERIES 551, 533 — with Nib Style and Standard Jaws
FEATURES
Technical Data
0
201
40
1207
Display:
LCD
Scale type: ABSOLUTE electrostatic linear encoder
Battery:
SR44 (1 pc.), 938882
(1 year: 300mm models)
(3.5 years: over 300mm models)
Dust/Water protection level: IP67 (models up to 300mm)
•The rounded faces of the jaws are ideal for
accurate inside diameter (ID) measurement.
•SPC output. (Series 551)
•Inside and outside measurements can be
read directly from the upper and lower
vernier scales (Series 533).
551-311-10
(inch/mm models)
Alarm:
533-404
D
02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)*
*For IP67 models (up to 300mm)
SPECIFICATIONS
Metric
Digital model
Range*
Order No.
0 - 200mm (10 - 210mm)
551-301-10
0 - 300mm (10 - 310mm)
551-331-10
0 - 500mm (20 - 520mm)
551-204-10
0 - 750mm (20 - 770mm)
551-206-10
0 - 1000mm (20 - 1020mm) 551-207-10
Accuracy
±0.03mm
±0.04mm
±0.06mm
±0.06mm
±0.07mm
Remarks
IP67
—
—
—
Accuracy
±.0015"
±.002"
±.0025"
±.0025"
±.003"
Remarks
IP67
—
—
—
*( ): inside measurement
Inch/Metric
Range*
0 - 8" (.4” - 8.4”)
0 - 12" (.4” - 12.4”)
0 - 20" (.5” - 20.5”)
0 - 30" (.5” - 30.5”)
0 - 40" (1” - 41”)
Digital model
Order No.
551-311-10
551-341-10
551-224-10
551-226-10
551-227-10
Metric
Range*
0 (20) - 500mm
0 (20) - 750mm
0 (20) - 1000mm
Round surface of
jaws for accurate CD
measurement
with metric/metric double scale
Order No. Accuracy
533-404
±0.10mm
533-405
±0.12mm
533-406
±0.15mm
Remarks
—
—
—
D-13
Dial Caliper
SERIES 505
FEATURES
•Newly designed dial movement for ultra
smooth sliding and high shock protection.
•Titanium coating is applied to the sliding
surfaces to enhance the durability (except
for 0 - 300mm and 0 - 12" model). No
wear over 100,000-time sliding test.
•Clamping screw atop the slider.
•Special models available with carbidetipped outside and inside jaws.
505-671
505-681
505-673
505-683
SPECIFICATIONS
Titanium coating
Conventional
Metric
Order No.
505-680
505-671 / 505-683*
505-707
505-711
505-681 / 505-685*
505-672 / 505-684*
505-682 / 505-686*
505-673
Accuracy
±0.015mm
±0.03mm
±0.03mm
±0.03mm
±0.02mm
±0.03mm
±0.03mm
±0.04mm
Graduation
0.01mm, 1mm/rev
0.02mm, 2mm/rev
0.02mm, 2mm/rev
0.02mm, 2mm/rev
0.01mm, 1mm/rev
0.02mm, 2mm/rev
0.01mm, 1mm/rev
0.02mm, 2mm/rev
Remarks
—
—
—
—
—
—
Order No.
505-674
505-675 / 505-689*
505-708
505-712
505-676 / 505-690*
505-709
505-713
505-720
505-677*
505-721
505-710*
505-714*
Accuracy
±.001"
±.001"
±.001"
±.001"
±.002"
±.002"
±.002"
±.002"
±.002"
±.002"
±.002"
±.002"
Graduation
.001", .1"/rev
.001", .1"/rev
.001", .1"/rev
.001", .1"/rev
.001", .1"/rev
.001", .1"/rev
.001", .1"/rev
.001", .2"/rev
.001", .1"/rev
.001", .2"/rev
.001", .1"/rev
.001", .1"/rev
Remarks
—
—
—
—
—
*Silver cover type
Inch
Range
0 - 4"
0 - 6"
0 - 6"
0 - 6"
0 - 8"
0 - 8"
0 - 8"
0 - 12"
0 - 12"
0 - 12"
0 - 12"
0 - 12"
*Silver cover type
DIMENSIONS
Unit: mm
d
c
b
L
Range
0 - 100mm
0 - 150mm
0 - 200mm
0 - 300mm
a
D
Range
0 - 100mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 300mm
D-14
L
180
231
288
403
a
40
40
50
64
b
21
21
24.5
27.5
c
16.5
16.5
20
22
d
16
16
16
20
Wear: 0µm
Technical Data
Wear: 4µm
Dial reading: Refer to the list of specifications.
SERIES 552 — with Interchangeable Jaws
FEATURES
•The range of applications can be expanded
by using interchangeable jaws (optional).
•Quick and easy exchanging of jaws due to
the unique clamping mechanism. (A pair of
clamping wheels is a standard accessory.)
•Provided with preset function for setting a
desired starting point, which allows direct
readout of offset measurements.
•SPC data output.
552-182-10 with optional interchangeable jaws
SPECIFICATIONS
Metric
Technical Data
Display:
LCD
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 5,000 hours in continuous use
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
Inch/Metric
Order No.
552-181-10
552-182-10
552-183-10
552-184-10
552-185-10
Range
0 - 450mm
0 - 600mm
0 - 1000mm
0 - 1500mm
0 - 2000mm
Accuracy
±0.04mm
±0.04mm
±0.05mm
±0.09mm
±0.12mm
Standard type
Inside point type
Standard Type
a
Order No.
07CZA058
07CZA059
9
b
Surface Plate Type
Scriber Type
60
Order No.
07CZA055
9
07CZA061
øa
b
Components
a
07CZA041 x 2pcs. 25mm
07CZA048 x 2pcs. 1"
b
50mm
2"
Components
a
Right (07CZA042), 8mm
Left (07CZA043)
Right (07CZA042), 031"
Left (07CZA049)
b
30mm
1.2"
a
Functions
b
30mm
(1.2")
Scriber Type
9
b
Components
a
Right (07CAA044), 28mm
Left (07CAA045) (1.1")
Inside Point Type
35
5
4.5
a
Order No.
07CZA056
9
b
0.5
Surface Plate Type
Centerline Type
Origin-set, Zero-setting, Presetting, Offsetting, Data hold,
Automatic power on/off, Data output, inch/mm conversion
(inch/mm models)
Alarm:
9
Order No.
07CZA044
a
90mm (3.5")
b
28mm (1.1")
Centerline Type
30
Unit: mm
Accuracy
±.002"
±.002"
±.002"
±.004"
±.005"
Interchangeable Jaws (Optional)
9
Order No.
552-191-10
552-192-10
552-193-10
552-194-10
552-195-10
Range
0 - 18"
0 - 24"
0 - 40"
0 - 60"
0 - 80"
ø1
øa
b
Order No.
07CZA057
07CZA060
D-15
Components
a
07CZA039 x 2pcs. 30mm
07CZA047 x 2pcs. 1.2"
b
30mm
1.2"
D
SERIES 552
FEATURES
•Lightweight Digimatic Calipers that employ
CFRP (Carbon Fiber Reinforced Plastics) in
the beam and jaws.
•Highly durable and easy to handle.
•The range of applications can be expanded
by using the optional attachments.
•Direct readout of inside measurements
from the LCD. (Offset value can be set
easily by using the Offset key.)
•Preset function for setting a desired
starting point.
•SPC data output.
•Special model available with ceramic jaws
suitable for measuring magnetic products.
552-314-10
552-155-10
D
552-151-10
SPECIFICATIONS
Technical Data
Metric
Range*
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
Order No. (standard / long jaws / ceramic jaws)
552-302-10 / 552-150-10 / 552-155-10
552-303-10 / 552-151-10 / 552-156-10
552-304-10 / 552-152-10
552-305-10 / 552-153-10
552-306-10 / 552-154-10
Accuracy (standard / long jaws / ceramic jaws)
±0.04mm / ±0.06mm / ±0.04mm
±0.04mm / ±0.06mm / ±0.04mm
±0.05mm / ±0.07mm
±0.09mm / ±0.11mm
±0.12mm / ±0.14mm
Display:
LCD
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 5,000 hours in continuous use
Inch/Metric
Range*
0 (.5”) - 18"
0 (.5”) - 24"
0 (1”) - 40"
0 (1”) - 60"
0 (1”) - 80"
Order No. (standard / long jaws / ceramic jaws)
552-312-10 / 552-160-10 / 552-165-10
552-313-10 / 552-161-10 / 552-166-10
552-314-10 / 552-162-10
552-315-10 / 552-163-10
552-316-10 / 552-164-10
D-16
Accuracy (standard / long jaws / ceramic jaws)
±.002" / ±.0025” / ±.002”
±.002" / ±.0025” / ±.002”
±.002" / ±.003”
±.004" / ±.0045”
±.005" / ±.0055”
Functions
Origin-set, Zero-setting, Presetting, Offsetting, Data hold,
Automatic power on/off, Data output, inch/mm conversion
(inch/mm models)
Alarm:
DIMENSION
Unit: mm
L
d
e
c
a
Standard models
Ceramic jaw models
Long jaw models
Standard models, Ceramic jaw models
b
Range
0 - 450mm
0 - 600mm
0 - 1000mm
0 - 1500mm
0 - 2000mm
f
8
f
R10
L
640
790
1230
1740
2250
a
100
100
150
150
150
b
18
18
24
24
24
c
41.2
41.2
62.8
62.8
62.8
d
91.8
91.8
113.8
113.8
113.8
e
25
25
32
32
32
f
10 (.25")
10 (.25")
10 (.5")
10 (.5")
10 (.5")
a
200
200
200
200
200
b
24
24
24
24
24
c
89
89
110
110
110
d
91.8
91.8
113.8
113.8
113.8
e
25
25
32
32
32
f
10 (.25")
10 (.25")
10 (.5")
10 (.5")
10 (.5")
( ): inch/mm models
Long jaw models
Range
0 - 450mm
0 - 600mm
0 - 1000mm
0 - 1500mm
0 - 2000mm
L
680
830
1280
1790
2300
( ): inch/mm models
D
L
d
e
c
Interchangeable jaw models
Interchangeable jaw models
Range
0 - 450mm
0 - 600mm
0 - 1000mm
0 - 1500mm
0 - 2000mm
L
640
790
1230
1740
2250
( ): inch/mm models
D-17
c
41.2
41.2
62.8
62.8
62.8
d
91.8
91.8
113.8
113.8
113.8
e
25
25
32
32
32
Vernier Caliper
SERIES 160 — with Nib Style Jaws and Fine Adjustment
FEATURES
•With fine adjustment (excepting
160-130/131/132/133/134).
•The single main scale models feature an
additional (offset) vernier scale to enable
inside measurements to be read directly.
•The jaws have round measuring faces
for accurate inside diameater (ID)
measurement.
160-131
160-101
Technical Data
Graduation: Refer to the list of specifications.
SPECIFICATIONS
Metric
Range*
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
with inside measurement vernier scale
Order No. Accuracy
Graduations
160-130
±0.10mm
0.05mm
160-131
±0.10mm
0.05mm
160-132
±0.15mm
0.05mm
160-133
±0.22mm
0.05mm
160-134
±0.28mm
0.05mm
Remarks
without fine adjustment
*( ): Minimum dimension in ID measurement
Metric
Order No. Accuracy
Graduations
160-127
±0.04mm
0.02mm
160-128
±0.05mm
0.02mm
160-101
±0.05mm
0.02mm
160-104
±0.07mm
0.02mm
160-110
±0.1mm
0.02mm
160-113
±0.12mm
0.02mm
Remarks
—
—
—
—
—
—
Metric/Inch
Remarks
+10mm/.394” to reading in inside measurement
Inch
Range*
0 (.3”) - 12"
0 (.5”) - 18"
0 (.5”) - 24"
0 (1”) - 40"
0 (1”) - 60"
0 (1”) - 80"
DIMENSIONS
Order No.
160-124
160-116
160-102
160-105
160-111
160-114
Accuracy
±.0015"
±.002"
±.002"
±.003"
±.004"
±.005"
Graduations
.001”
.001”
.001”
.001”
.001”
.001”
Remarks
—
—
—
—
—
—
Inch/Metric
Range*
0 (.3”) - 12"
0 (.5”) - 18"
0 (.5”) - 24"
0 (1”) - 40"
0 (1”) - 60"
0 (1”) - 80"
Round-faced jaws for accurate ID
measurement
L
d
Graduations
0.02mm/.001”
0.02mm/.001”
0.02mm/.001”
0.02mm/.001”
0.02mm/.001”
0.02mm/.001”
b
Accuracy
±0.04mm
±0.05mm
±0.05mm
±0.07mm
±0.1mm
±0.12mm
c
Order No.
160-150
160-151
160-153
160-155
160-157
160-159
R
e
f
Range*
0 (10) - 300mm
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
a
D
Range*
0 (10) - 300mm
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
with inch/metric double scale
Order No.
160-125
160-119
160-103
160-106
160-112
160-115
Accuracy
±.0015"
±.002"
±.002"
±.003"
±.004"
±.005"
Graduations
.001”/0.02mm
.001”/0.02mm
.001”/0.02mm
.001”/0.02mm
.001”/0.02mm
.001”/0.02mm
D-18
Unit: mm
Remarks
+.3”/7.62mm to reading in inside measurement
+1”/25.4mm to reading in inside measurement
Range
0 - 300mm
0 - 450mm
0 - 600mm
0 - 1000mm
0 - 1500mm
0 - 2000mm
L
445
630
780
1240
1800
2300
a
95
125
125
172
212
220
b
25
100
100
140
180
180
c
12
18
18
24
30
30
d
20
25
25
32
32
40
e
10
14.8
14.8
17
19
23
f
3.8
6
6
10
10
12
R
R5
R10
R10
R10
R10
R10
Long Jaw Vernier Caliper
SERIES 534
FEATURES
•Long jaws for measuring hard-to-reach
workpiece features.
534-110
534-114
SPECIFICATIONS
Metric
Order No.
534-109
534-110
Range*
0 (10) - 300mm
0 (20) - 500mm
Technical Data
Graduation: Refer to the list of specifications.
Accuracy
±0.07mm
±0.13mm
Graduation
0.05mm
0.05mm
Remarks
Metric
Order No.
534-113
534-114
534-115
534-116
Range*
0 (10) - 300mm
0 (20) - 500mm
0 (20) - 750mm
0 (20) - 1000mm
Accuracy
±0.04mm
±0.06mm
±0.08mm
±0.10mm
Graduation
0.02mm
0.02mm
0.02mm
0.02mm
Remarks
—
—
—
—
D
Metric/Inch
Order No. Accuracy
Graduation
534-101
±0.07mm
0.05mm/ 1/128”
534-105
±0.04mm
0.02mm/.001”
534-102
±0.13mm
0.05mm/ 1/128”
534-106
±0.06mm
0.02mm/.001”
534-103
±0.16mm
0.05mm/ 1/128”
534-107
±0.08mm
0.02mm/.001”
534-104
±0.20mm
0.05mm/ 1/128”
534-108
±0.10mm
0.02mm/.001”
Range*
0 (10) - 300mm
0 (10) - 300mm
0 (20) - 500mm
0 (20) - 500mm
0 (20) - 700mm
0 (20) - 700mm
0 (20) - 1000mm
0 (20) - 1000mm
Remarks
Inch
Order No.
534-117
534-118
534-119
534-120
Range*
0 (.3”) - 12"
0 (.8”) - 20"
0 (.8”) - 30"
0 (.8”) - 40"
Accuracy
±.002"
±.003"
±.004"
±.004"
Graduation
.001”
.001”
.001”
.001”
Remarks
—
—
—
—
DIMENSIONS
Unit: mm
L
c
b
a
d
Round-faced jaws for accurate ID
measurement
L
445
682
995
1230
f
e
R
Range
0 - 300mm
0 - 500mm
0 - 750mm
0 - 1000mm
D-19
a
110
225
232
232
b
90
200
200
200
c
12
18.5
18.5
18.5
d
20
25
32
32
e
7
12
12
12
f
3.8
6
8
8
R
R5
R10
R10
R10
Offset Caliper
SERIES 573, 536 — ABSOLUTE Digimatic and vernier type
FEATURES
•The beam-mounted jaw can be adjusted to
facilitate measurement of stepped sections
and hard-to-get-at workpiece features.
•With depth bar.
•SPC data output (Series 573).
Technical Data
201
40
1207
Display*: LCD
Scale type*: ABSOLUTE electromagnetic linear encoder
Battery*: SR44 (1 pc.), 938882
(1 year: 300mm model)
Dust/Water protection level*: IP67
0
573-601
536-101
SPECIFICATIONS
Metric
Range
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 300mm
Inch/Metric
Digital model
Order No.
573-601
573-611*
573-602
573-612*
573-604
573-614*
Accuracy
±0.02mm
±0.02mm
±0.02mm
±0.02mm
±0.03mm
±0.03mm
Order No.
536-101
536-102
536-103
Accuracy
±0.05mm
±0.05mm
±0.08mm
Range
0 - 6"
0 - 8"
0 - 12"
Digital model
Order No.
Accuracy
573-701
±.001"
573-702
±.001"
573-704
±.0015"
*Without thumb roller
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
DIMENSIONS
A
Unit: mm
d
d
c
c
a
a
D
Alarm:
Vernier model
Digital model
b
b
Range
0 - 150mm/0 - 6”
0 - 200mm/0 - 8”
0 - 300mm/0 - 12”
D-20
a
95
95
135
b
10
10
15
c
40
50
64
d
30
38.5
51
B
C
Offset Centerline Caliper
FEATURES
•Specially designed for hole center-tocenter measurements on the same, or
offset, planes.
•Can also measure from an edge to a hole
center.
•Hole diameter should be in the range
1.5mm - 10mm (.06" - .4").
573-605
Technical Data
0
201
40
Display*: LCD
1207
Battery*: SR44 (1 pc.), 938882
(1 year: 310mm model)
536-105
Metric
Inch/Metric
Digital model
Order No.
573-605
573-615*
573-606
573-616*
573-608
573-618*
Range
10 - 160mm
10 - 160mm
10 - 210mm
10 - 210mm
10 - 310mm
10 - 310mm
Accuracy
±0.03mm
±0.03mm
±0.03mm
±0.03mm
±0.04mm
±0.04mm
D
Digital model
Order No.
573-705
573-706
573-708
Range
.4 - 6.4"
.4 - 8.4"
.4 - 12.4"
Accuracy
±.0015"
±.0015"
±.0015"
*Without thumb roller
Metric
Order No.
536-105
536-106
536-107
Range
10 - 150mm
10 - 200mm
10 - 300mm
Accuracy
±0.05mm
±0.05mm
±0.08mm
DIMENSIONS
Unit: mm
30
a
10
10
ø1
t
ø1
Vernier model
10
10
Range
10 - 150mm
10 - 200mm
10 - 300mm
Digital model
ø1
t
SPECIFICATIONS
30
a
Alarm:
a
75
75
100
t
3
3
3.8
Range
10 - 160mm/.4 - 6.4”
10 - 210mm/.4 - 8.4”
10 - 310mm/.4 - 12.4”
D-21
a
75
75
100
t
3.5
3.5
3.8
ABSOLUTE Back-Jaw Centerline Caliper
SERIES 573 — Center-to-center & edge-to-center Types
FEATURES
•Specially designed to measure hole centerto-center or edge-to-center distances.
•Provided with jaws on the back of the
slider, measurements can be read easily
from above.
•Direct reading of pitch measurements is
available due to the offset value setting
function.
•SPC data output.
573-116-10
(Center-to-center type)
Technical Data
573-118-10
(Edge-to-center type)
Display:
LCD
Battery:
SR44 (1 pc.), 938882
D
SPECIFICATIONS
Order No.
573-116-10
573-117-10
Accuracy
±0.10mm
±0.15mm
Alarm:
Edge-to-center distance type
Order No.
Accuracy
573-118-10
±0.10mm
573-119-10
±0.15mm
Range
10 - 200mm
10 - 300mm
05FAJ735: Centerline caliper inspection gage
DIMENSIONS
Unit: mm
(250)
50±0.015
100±0.015
150±0.015
4−ø5
(25)
64
(30)
30
30
30
64
0
(40)
Range
10 - 200mm
10 - 300mm
Functions
Metric
Center-to-center distance type
(10)
Metric
ø1
ø20
ø1
ø10
ø1
ø1
573-116-10
573-117-10
ø20
D-22
573-118-10
573-119-10
ø10
Point Caliper
FEATURES
•With depth bar.
•Narrow-tip jaws fit into very small grooves
and tracks, making many previously
difficult outside measurements far easier
to obtain.
573-621
Technical Data
0
201
40
1207
Display*: LCD
Battery*: SR44 (1 pc.), 938882
536-121
Range
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
Inch/Metric
Digital model
Order No.
573-621
573-625
573-622*
573-626*
Accuracy
±0.02mm
±0.02mm
±0.02mm
±0.02mm
Order No.
536-121
Accuracy
±0.05mm
Digital model
Order No.
Accuracy
573-721
±.001"
573-725
±.001"
Range
0 - 6"
0 - 6"
*without thumb roller
Metric
Range
0 - 150mm
DIMENSIONS
Unit: mm
30
40
25°
2
2
2
0.3
30
21
10
30
40
°
40
573-625, 626, 725
21
°
Metric
10
SPECIFICATIONS
10
Alarm:
0.3
0.3
536-121
0.3
573-621, 622, 721
D-23
D
Blade Type Caliper
FEATURES
•With depth bar.
•The thin blade-type jaws fit into very small
grooves and make previously difficult
outside measurements far easier to obtain.
•The outside measuring faces are carbidetipped.
573-634
Technical Data
0
201
40
1207
Display*: LCD
Battery*: SR44 (1 pc.), 938882
536-134
SPECIFICATIONS
Metric
Range
0 - 150mm
0 - 150mm
Inch/Metric
Digital model
Order No.
573-634
573-635*
Accuracy
±0.02mm
±0.02mm
Order No.
536-134
536-135
536-136
Accuracy
±0.05mm
±0.05mm
±0.08mm
Range
0 - 6"
Digital model
Order No.
Accuracy
573-734
±.001"
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
DIMENSIONS
Unit: mm
3.5
20
a
40
t
b
D
Alarm:
0.75
c
Virnier model
Digital model
D-24
Range
0 - 150mm
0 - 200mm
0 - 300mm
a
40
50
64
b
20
25
30
c
0.75
0.75
1
t
3
3
3.8
Neck Caliper
FEATURES
•Can measure wall thickness inside bores
and recesses.
573-651
Technical Data
Point jaw type
0
201
40
1207
Display*: LCD
Battery*: SR44 (1 pc.), 938882
536-151
536-152
Inch/Metric
Digital model
Order No.
573-651
573-652*
573-653
573-654*
Accuracy
±0.03mm
±0.03mm
±0.03mm
±0.03mm
Digital model
Order No.
Accuracy
573-751
±.0015"
573-752*
±.0015"
Range
0 - 6"
0 - 6"
*Point type
*Point type 573-653, 573-654: without thumb roller
Metric
Order No.
536-151
536-152*
Range
0 - 150mm
0 - 150mm
Accuracy
±0.05mm
±0.05mm
*Point type
DIMENSIONS
28.5
40
33.5
35
Unit: mm
536-151
5
5
573-651, 653, 751
5
33.5
Point jaw type
536-152
40
ø2.4
ø0.5
5
5
5
Metric
Range
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
38
SPECIFICATIONS
2
Alarm:
5
10
D-25
5
(e)
Point jaw type
573-652, 654, 752
D
ABSOLUTE Inside Caliper
SERIES 573, 536 — Knife-edge/Inside Groove/Point Jaw Type
FEATURES
•Specially designed for inside measurements
in hard-to-reach places.
Knife-edge type
573-642
536-142
Inside groove type
Technical Data
0
201
40
1207
Display*: LCD
Battery*: SR44 (1 pc.), 938882
573-745
D
536-145
Point jaw type
Alarm:
573-646
536-146
SPECIFICATIONS
Metric
Range
10 - 200mm
10 - 200mm
10 - 160mm
10 - 160mm
20 - 170mm
20 - 170mm
Digital model
Order No.
573-642
573-643*
573-645
573-647*
573-646
573-648*
Knife-edge type
Accuracy
±0.05mm
±0.05mm
±0.05mm
±0.05mm
±0.03mm
±0.03mm
Remarks
Knife-edge type, Measurable min. hole diameter: ø10mm
Inside groove type, Measurable min. hole diameter: ø10mm
Point jaw type, Measurable min. hole diameter: ø20mm
Digital model
Order No.
573-742
573-745
573-746
Accuracy
±.002"
±.002"
±.0015"
Remarks
Knife-edge type, Measurable min. hole diameter: ø.4"
Inside groove type, Measurable min. hole diameter: ø.4"
Point jaw type, Measurable min. hole diameter: ø.8"
Order No.
536-142
536-145
536-146
536-147
536-148
536-149
Accuracy
±0.12mm
±0.05mm
±0.05mm
±0.08mm
±0.10mm
±0.12mm
Remarks
Inside groove type
Inch/Metric
Range
.4" - 8"
.4" - 6"
.8" - 6"
Metric
Range
10 - 200mm
10 - 150mm
20 - 150mm
30 - 300mm
70 - 450mm
70 - 600mm
Point jaw type
D-26
More than ø20
DIMENSIONS
Unit: mm
Knife-edge type: 573-642, 643, 742
Knife-edge type: 536-142
290
16
74.5
8
3
3
0.3
8
0.3
57.5
65
X‘
X
X‘
X
70
70
90.5
16
288
Section X−X’
Section X−X’
Inside groove type: 573-645, 647, 745
Inside groove type: 536-145
5
5
R5
R5
R5
3
3.5
R5
23.5
20
3
3
Point jaw type: 573-646, 648, 746
Point jaw type: 536-146, 147, 148, 149
a
5 (e)
*450 and 600mm range models
a
229
403
610
750
b
16
20
25
25
c
38
98
145
145
d
31
89
136
136
e
5
5
10
10
f
5
10
25
25
5
10
g
2
2
5
5
D-27
ø0.5
°)
(60
ø2.4
40
28.5
31.5
ø0.5 (ø1)*
2
e
ø2.4 (ø5)*
60°
d
c
g
f
56
b
(16)
(233)
38
3
20
3
Range
150mm
300mm
450mm
600mm
D
35
35
16
233
16
229
Tube Thickness Caliper
FEATURES
•The beam-mounted jaw is a round bar
that facilitates measurements of tube wall
thickness.
573-661
Technical Data
0
201
40
1207
Display*: LCD
Battery*: SR44 (1 pc.), 938882
536-161
Alarm:
SPECIFICATIONS
Metric
Range
0 - 150mm
0 - 150mm
Inch/Metric
Digital model
Order No.
573-661
573-662*
Accuracy
±0.05mm
±0.05mm
Order No.
536-161
Accuracy
±0.05mm
Range
0 - 6"
Digital model
Order No.
Accuracy
573-761
±.002"
Metric
Range
0 - 150mm
DIMENSIONS
Unit: mm
56
16
229
32
40
More than ø3
Vernier model
ø3
40
56
16
235
32
D
Digital model
ø3
D-28
Hook Type Vernier Caliper
SERIES 536
FEATURES
•Can measure width of grooves and lands
inside bores and recesses.
Technical Data
536-171
Accuracy: ±0.03mm
Graduation: 0.02mm
536-172
SPECIFICATIONS
Metric
Order No.
536-171
536-172
Range*
0 (10) - 200mm
0 (2) - 200mm
Accuracy
±0.03mm
±0.03mm
Remarks
—
DIMENSIONS
Unit: mm
b
Range
536-171
536-172
f
c
g
e
d
a
More than ø30mm
L
L
a
320 28
320 28
b
c
— —
28.5 20
d
12
12
e
4
4
f
5
1
g
3.5
3.5
More than
ø30mm
R5: 536-171
Flat: 536-172
D
Swivel Vernier Caliper
SERIES 536 — Moving Jaw type
FEATURES
•With depth bar.
536-212
SPECIFICATIONS
Metric
Range
0 - 200mm
Order No.
536-212
Accuracy
±0.05mm
DIMENSIONS
Unit: mm
16
14.5
288
42
50
Accuracy: ±0.05mm
Graduation: 0.05mm
•The moving jaw can be rotated to measure
sectioned shafts.
91
Technical Data
D-29
ABSOLUTE Low Force Caliper
SERIES 573
FEATURES
rubber parts that standard calipers cannot
measure accurately.
•SPC data output.
•Due to the low measuring force these
calipers are ideal for measuring elastic
workpieces such as plastic parts and
SPECIFICATIONS
Inch/Metric
Metric
Order No.
573-191-20
Order No.
573-291-20
Range
0 - 7"
Accuracy
±0.05mm
Technical Data
Display:
LCD
Measuring force: 0.49N to 0.98N (50gf to 100gf)
Jaw retraction: 0.3mm
Battery:
SR44 (1 pc.), 938882
573-191-20
Range
0 - 180mm
Accuracy
±.002"
DIMENSIONS
Functions
Alarm:
Unit: mm
16
314
40
A consistently low
measuring force
can be guaranteed
by only taking
measurements
when the pointer is
between the two fiducial lines.
D
Measurement procedure
ABSOLUTE Snap Caliper
SERIES 573
Technical Data
FEATURES
•The ABSOLUTE Digimatic snap caliper
features a spring-loaded mechanism to
allow quick and efficient GO/NO-GO
inspection for mass production parts.
•SPC data output.
Functions
573-181-20
Alarm:
SPECIFICATIONS
Metric
Inch/Metric
Order No.
573-181-20
573-182-20
Range
0 - 100mm
0 - 150mm
Accuracy
±0.02mm
±0.02mm
Order No.
573-281-20
573-282-20
Range
0 - 4"
0 - 6"
Accuracy
±.001"
±.001"
DIMENSIONS
Unit: mm
d
c
b
L
a
Range
0 - 100mm/0 - 4"
0 - 150mm/0 - 6"
27.5
D-30
Repeatability: 0.01mm
Display:
LCD
Measuring force: 7N to 14N (700gf to 1400gf)
Jaw retraction: 2mm
Battery:
SR44 (1 pc.), 938882
L
233
290
a
40
50
b
c
d
21 16.5 16
24.5 20 16
02AZD790C: SPC cable for U-WAVE w/ data switch (160mm
Scribing Caliper
FEATURES
•The carbide-tipped jaws facilitate fine
scribing on workpiece.
•With depth bar.
573-676
Technical Data
0
201
40
1207
Display*: LCD
Battery*: SR44 (1 pc.), 938882
(1 year: over 300mm model)
Functions
Alarm:
SPECIFICATIONS
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
Digital model
Order No.
573-676
573-677
573-679
Accuracy
±0.02mm
±0.02mm
±0.03mm
Order No.
536-221
536-222
536-223
Accuracy
±0.05mm
±0.05mm
±0.08mm
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
D
DIMENSIONS
Unit: mm
e
d
c
b
L
a
Range
0 - 150mm
0 - 200mm
0 - 300mm
L
229
288
403
D-31
a
46
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
e
33
43
54
Plastic Caliper
SERIES 700 — Digital Caliper for DIY
FEATURES
Technical Data
Display:
LCD
Scale type: Electrostatic linear encoder
Max. response speed: 1800mm/s
Battery:
SR44 (1 pc.), 938882
•Plastic construction for lightweight use.
•Ideal for use in laboratory, wood-shop,
nursery, doctor’s surgery, office, etc.
Functions
Zero-setting, Power on/off
Alarm:
700-127
700-128
SPECIFICATIONS
Metric
Inch/Metric
Order No.
700-127
700-128*
Range
0 - 150mm
0 - 150mm
Accuracy
±0.2mm
±0.5mm
Order No.
700-126
Range
0 - 6"
Accuracy
±.008"
*Deep throat type without inside measuring jaws.
DIMENSIONS
Unit: mm
235
(60)
16
19
15
235
65
(14.2)
8
4
4
(14.2)
15
(34)
40
80
16
(34)
(60)
1
D
700-127, 700-126
D-32
700-128

D-1 Small Tool Instruments and Data Management Digimatic

Transcription

Similar documents

D-1 Small Tool Instruments Calipers Height Gages Depth

MITUTOYO Digimatic Scale