- Haglöf Sweden AB

The SmartScale
•
•
•
•
•
•
REb
Large variety of scale configurations and lengths
Patented, sealed, absolute and certified measuring system
Patented foldable jaws with special slim design for increased reach
Chargeable low-consuming Li-Ion battery and LED indicator light
Measuring results are transferred with radio signals
Haglöf Sweden® Quality Craftsmanship - experience and know-how in every detail
The SmartScaleREB is a lightweight
caliper with patented foldable jaws
and a non-incremental measuring
system. When equipped with
the Radio Enter Button, diameter
results can be transferred from the
SmartScale to the DP II computer
terminal. The workmode is
convenient when cruising vast areas,
in dense and thick forests and to
measure diameters in timber piles.
The SmartScaleREB is durable and well
balanced and suitable for all types of diameter measuring. The patented jaws are
foldable and produced to endure tough
strain on a daily basis. When measuring in timber stacks and piles, the slim
design of the jaws offers better reach in
difficult measurement places.
The SmartScale has an absolute measuring system, sealed and protected from
moisture and dirt. Graduation and digits
are long-lasting and very durable. Power
consumption is low and a red, blinking
LED light warns when the SmartScale
needs to be recharged.
TECHNICAL SPECIFICATION SMARTSCALE
The SmartScale can transfer mesuring data with
radio to the DP II Computer terminal. The work
mode is convenient in thick and dense forests,
and when measuring diameters in piles. For data
transfer from the SmartScale to other handheld
brand computers, use the DP232 accessory and
corresponding communication software.
All functions are determined by the DP II
software and the computer terminal that
has been pre-linked to the SmartScaleREB
unit.
When using a stand-alone SmartScaleREB
with the Radio Enter Button factory assembled on the caliper handle, measuring
data can be sent to the DP II computer
terminal for storage and processing. Ask
us for compatible software solutions for
this work mode, convenient when reach
and space are limited, for example in log
scaling operations.
The SmartScale, here together with the DP II Computer
Terminal and the holder to attach the terminal.
Temperature:
Min -20° Max 60° C/ Min -4° Max 140° F.
Energy:
Battery: Rechargeable Li-ion, 3.7V 155 mAh
Consumption: One week/charge/application depending. Time full charge: approx. 3
hrs. Charger: 5V USB charger mini B.
Radio:
2.45Ghz, GFSK 1Mbps. Radio format: Internal, binary. Communication: with DP232
accessory; alt. DP II Computer Terminal
2.4GHz 0dbm. 1x CR2032 coin cell battery,
approx. 1 year use.
Measuring
system:
Technical: Non contact, sealed. Scale:
Aluminum, non reflecting, clear digits. Jaws:
Foldable aluminum. Adjustable sliders
(2ea), adjustable angle/jaws (2ea). Measuring Unit: mm; inch.
Measuring
range:
500mm/18”; 650mm/24”; 800mm/30”;
950mm/36”; 1020mm/40” (standard). Scale
lengths with German certification and
classification: 500mm; 600mm; 800mm and
1000mm. Accuracy: +-1mm Resolution:
1mm/0.1”.
Button:
DP Radio Enter Button.
Weight:
Scale length: 500mm 750g; 650mm <870g;
800mm <1000g.
Communication:
USB cable 2m, mini B, incl. adapter for
SmartScale.
Indicator:
Battery warning red LED light blinking when
weak battery.
Classification:
EN 61000-6-3:2007, N 61000-6-2:2005, EN
61000-4-2, -3, -4, -5, -6, -11, 2006/95/EC, ETSI
2006/95/EC, 2006/95/EC.
CE; Fcc 47 Part 15C, 15.249. Id: 2AAYWDPII.
IP67
Holder:
Suitable for DPII Computer Terminal.
Accessories:
DPII Computer Terminal; DP232. External
adapter for color marking system.
SmartScaleREb 13-420-1101--1105
SmartScaleREb package/set includes caliper in specified length and configuration with remote Radio Enter Button, scale lengths 500mm; 650mm;
800mm; 950mm; 1020mm (standard); German certification/classified scales: 500mm; 600mm; 800mm and 1000mm, foldable jaws, DP232 receiver
aluminum safety case, USB cable, USB adapter, USB car adapter, AC/DC international charger.
The DP232 receiver
The SmartScale with jaws folded flat against the
measuring scale
The SmartScale with
jaws in upright position
With a custom made Haglöf Sweden® DP 232 receiver, the
SmartScale can communicate with external computers and
handheld computers for data storage and processing. Serial data
is sent from the SmartScale to the handheld with parameters Baud
1200, 8, N, 1. The format is compatible with the Haglöf Mantax
Digitech® digital caliper, where the first digit refers to tree species
(1..8) and the following digits refer to tree diameter (0..999mm).
The DP232 accessory is synchronized with one individual
SmartScale and Radio Enter Button device prior to use. Once the
synchronization process is set between the SmartScale, the Radio
Enter button and the DP 232, tree species can be registered by
pressing the radio button x numbers of times, and according to the
following example: 1 press = tree species 1; 2 presses = tree species
2; 1 short press + 1 long press = tree species 5, etc. To speed up the
operation, it is possible to skip the registering of different species,
which is convenient if working in homogeneous forest areas.
Examples of handheld computers
that can operate with the
SmartScale and DP 232 receiver
The DP232 uses the comport connected for power and is
configurated with commands through the serial port. A
command is terminated with CR+LF. (ASCII 13+ASCII 10). All
settings are stored internally.
For the communication to work between SmartScale and
computer, we recommend using Haglöf ComLink software.
ComLink accepts transferred field data to the receiving unit for
further storage and processing.
TECHNICAL SPECIFICATION DP232
Power:
3.5-24VDC.
Consumption:
18mA (5V/90mW).
Radio:
GFSK 2.4Ghz 0dbm.
Interface:
Female RS232 1200Bps, No parity, 1 stop bit.
The DP II computer terminal placed on the wrist and the SmartScale used to measure standing trees. The DP II
terminal can in this case be used to key punch data and different variables. The DP II terminal is synchronized to
one specified SmartScale unit to receive remote diameter data input.
Image to left shows a complete DP II caliper
with the Radio Enter Button installed.
When using the SmartScale as a stand-alone product, the Radio Enter Button is used to send results to the DP II computer
terminal or other brand handheld computers.
Haglöf Sweden AB Ph: +46 620 255 80 [email protected] www.haglofsweden.com. ©Haglöf Sweden 2015. All rights reserved