1300 072 926 www.rayco-australia.com www.globalmachinerysales

1300 072 926 www.rayco-australia.com www.globalmachinerysales

RG70X
) 1300 072 926
www.rayco-australia.com
www.globalmachinerysales.com.au
VIC 24-28 Williams Road Dandenong Sth. 3175
F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148
F (02) 8678 2478 E [email protected]
RG70X
Rayco pioneered the market with hydrostatic drive stump cutters and our RG70X offers the ultimate in backyard stump cutting
performance. Using a powerful Kubota 66.8 hp diesel engine and a hydrostatic cutter wheel drive to let the operator vary cutter
wheel rpm independent of engine speed. Wide cutting dimensions keep you working without repositioning the machine and the
swing-out control station offers protection from flying debris while providing a good look at the cutting action. Low centre of gravity and 4 wheel drive for difficult terrain. Removing the outer dual wheels allow access through 36” (91.4cm) gates.
Specifications RG70X
Weight1,739.5kg
Length365.8cm
Maximum height
185.42cm
Width89cm
Engine 66.8hp Kubota
Ground Drive
2 speed, 4WD
Fuel Tank
53L
Super Tooth®
24
Cutter Wheel
58.4cm x 3.8cm
Cutting Depth
54.6cm
Cutting Height
78.7cm
Cutting Width
177.8cm
Features
Powerful 67hp Kubota Diesel Engine
Hydrostatic Cutter Wheel Drive
Quick-Stop Cutter Wheel
Command Cut Automatic Swing Speed Control
4 Wheel Drive
Two-speed Ground Travel
Dual Rear Wheels
Swing-out Operator Station
Hydraulic Backfill Blade
Auxilary Chip Retainer Curtains
Optional Radio Remote Controls
Available in remote control.
) 1300 072 926
www.rayco-australia.com
www.globalmachinerysales.com.au
VIC 24-28 Williams Road Dandenong Sth. 3175
F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148
F (02) 8678 2478 E [email protected]
RG100 DIESEL
) 1300 072 926
www.rayco-australia.com
www.globalmachinerysales.com.au
VIC 24-28 Williams Road Dandenong Sth. 3175
F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148
F (02) 8678 2478 E [email protected]
RG100 DIESEL
Our flagship RG100X offers the ultimate in backyard stump cutting performance. It uses a powerful 99.2 hp Kubota diesel engine
with a hydrostatic cutter wheel drive to let the operator vary cutter wheel rpm independent of engine speed. Wide cutting dimensions keep you working without repositioning the machine and the swing-out control station offers protection from flying debris
while providing a good look at the cutting action. Low center of gravity and 4 wheel drive let them get to the stumps even in difficult terrain. Optional radio remote controls available.
Specifications RG100 Diesel
Weight1,750.9kg
Length365.8cm
Maximum height
185.42cm
Width89cm
Engine 99.2hp Kubota
Ground Drive
2 speed, 4WD
Fuel Tank
63.6L
Super Tooth®
24
Cutter Wheel
58.4cm x 3.8cm
Cutting Depth
54.6cm
Cutting Height
78.7cm
Cutting Width
177.8cm
Features
Powerful 99hp Kubota Diesel Engine
Hydrostatic Cutter Wheel Drive
Quick-Stop Cutter Wheel
Command Cut Automatic Swing Speed Control
4 Wheel Drive
Two-speed Ground Travel
Dual Rear Wheels
Swing-out Operator Station
Hydraulic Backfill Blade
Auxilary Chip Retainer Curtains
Optional Radio Remote Controls
Available in remote control.
) 1300 072 926
www.rayco-australia.com
www.globalmachinerysales.com.au
VIC 24-28 Williams Road Dandenong Sth. 3175
F (03) 9791 7676 E [email protected]
NSW Unit 1/21 Penny Place Arndell Park 2148
F (02) 8678 2478 E [email protected]