Launching the Wiring Application

Chrysler Wiring Application Quick Start Guide
Launching the Wiring Application
In TechCONNECT, select a vehicle by either entering the VIN or selecting a year, model,
and engine, then click the Wiring tab. The Wiring Application will open in a new
window; Available VINs will be pre-selected in the application.
Note: Year, Model, Engine, Trim, Body Style, Drive and Transmission must all be
selected in order to see Wiring Diagrams.
Version 3.1
Page | 1
Chrysler Wiring Application Quick Start Guide
Finding Wiring Information
The Wiring Application has two ways to find information: a “Google” style Search
Feature or a Table of Contents (TOC).
Search Feature
The Search Feature may be the easiest way to find information. The search feature
allows you to find diagrams, connectors, and circuits by name, keyword or ID. Once you
enter your search terms, the system will display a list of matching items. For example:
Simple searches by one keyword like “Fuel” will render more options than using the
complete term you as searching for, “Fuel pump module”.
“Diagrams” section shows
preselected diagrams relevant to
your search also found in the
Table of Contents (TOC).
“More” button will display
additional search results
matching your keyword.
Clicking an item will give you a pop
up menu of choices that will allow
you to view a diagram or additional
details on a connector or circuit.
Version 3.1
Page | 2
Chrysler Wiring Application Quick Start Guide
Table of Contents
In addition to the Search Feature pre-selected diagrams and connectors are available in
the Table of Contents (TOC) along the left side of the application. Information is
organized by subsystem.
Expanding a subsystem will
show you a list of diagrams.
Expanding the “Connectors” will
show the available connectors in
the subsystem diagram.
Expanding the specific connector
will show that connectors details,
location or diagram.
Version 3.1
Page | 3
Chrysler Wiring Application Quick Start Guide
Using the Wiring Diagrams


Diagrams are organized by harness. Harness part numbers are displayed on the left
side of the diagram.
Wire color and tracer color are shown on the wires in the diagram.
Box with dotted line represents an
incomplete connector. Left click will
allow to draw the complete diagram
of that connector.


Components within a harness section are arranged such that the power (B+) side of
the circuit is placed near the top/left of each section, and the ground (B-) side of the
circuit is placed near the bottom/right of each section.
Modules and PIAs (Parts in Assembly) are displayed in a gray box on the diagram.
Solid Blue box represents a
component. This references the
complete TIPM and shows TIPM C7
connector at the bottom.
Version 3.1
Page | 4
Chrysler Wiring Application Quick Start Guide

Left clicking on a connector, splice, or circuit will open a menu with options to find
additional information.
o Connectors:
Show Component View:
Displays a page with more
information on the connector
such as the end view and pin
out tables.
Show Diagram of Component:
This option will generate a
custom diagram centered on the
selected connector.
Show Alternate Diagram:
This option will display a list
of other system diagrams
that include the selected
connector.
Show Component Location:
Displays where the connector is
located on the vehicle.
o Circuits:
Show Circuit Details:
This option will open a window
showing information on the
selected circuit including wire
gauge and circuit function.
Show Diagram of Circuit:
This option will generate a
custom diagram centered on the
selected circuit.
Version 3.1
Page | 5
Chrysler Wiring Application Quick Start Guide
Locate a Wiring Component on a Vehicle
From the Table of Contents (TOC), Search Feature, Component Details page or diagram,
you can find the location of a component on a vehicle. When you select this option, an
image of the vehicle will load with a line drawn to the connector. You can zoom in to
pinpoint the location of the connector.
NOTE: Depending on the vehicle and model year, different styles of location views may
be used.
Connector Information
From the Table of Contents (TOC), Search Feature, Component Details page or diagram,
you can find additional information about a connector. When you click this option, a
window will be shown with information on the connector including the end view, pin
information, color, and repair kit part number (if available).
Version 3.1
Page | 6
Chrysler Wiring Application Quick Start Guide
PDC lay out views
PDC top views (13-001-001) and Fuse charts (13-002-001) are available under Section 13
INTEGRATED POWER MODULE.
Immediate Assistance and Feedback
If you require immediate assistance while working on a vehicle, please call 1-888-wiTECH-1
for Wiring Diagram support.
Issues can also be reported by clicking the “Provide Feedback” button on the bottom of the
application. Issues submitted using the feedback form will be investigated and reviewed for
inclusion in a future release.
Version 3.1
Page | 7