Metric Gearmotors and Motors

Transcription

Standard Products Catalog
Upgraded AC
3-Phase Models!
AC Induction • Permanent Magnet DC • Brushless DC
pages 8
Metric Gearmotors and Motors | Accessories
®
bodine-electric.com
S-17a
For 2D/3D CAD drawings and distributor
locations, go to www.bodine-electric.com
Our website features the latest product specifications, technical documents,
connection diagrams and instruction manuals. Dimension drawings
and 3D models can be imported from the website directly into most
CAD software programs. You will also find information about Bodine’s
newest products, our distributor locator, and helpful Tech Tools designed
to answer the most commonly asked motion control questions.
3
4
2
BODINE ELECTRIC COMPANY
1
PART NO./REV:
INFM0216
A
DESCRIPTION:
GEARMOTOR 22B2BEBL-D3/4
SHEET:
UNLESS OTHERWISE SPECIFIED:
SCALE:
UNITS ARE IN INCHES [mm]
1/1
1:1 TOLERANCES:.XX:±.01 .XXX:±.005
C
D
14.0/11.0
ANGLES:
X°:±3°
X.X°:±0.5°
D
3.42 SQ MAX
2.652 TYP
5.522 MAX
(1.326)
TYP
1.56±.06
.554
C
(.582)
TYP
.92±.02
FLAT
.450
C
2.652 TYP
.5000
1.125±.008
NOT MACHINED
2.378 SQ MAX
[4] #10-32 UNF-2B
.377 MIN
B
B
A
A
REPRESENTATIVE OF MODEL NUMBER(S):
3326 3327 3328 3329 3330 3331 3333
3
4
1
2
UL/CSA Safety Compliance
Products are marked cURus
or UR/CSA, and most products
meet CE. All products are also
RoHS compliant.
RoHS
Motors and gearmotors
COMPLIANT
conform to UL standard 1004
and CSA standard C22.2 No.
100. They are documented in
UL file number E47177 and
CSA file number LR2797.
Electronic controls conform to UL
standard 508 and CSA standard
C22.2 No. 14. They are documented
in UL file number E44529 and
CSA file number LR26397.
Fixed-speed AC motors
• Voltage ratings are
115 VAC, 60 Hz (single-phase)
or 230 VAC, 60 Hz (3-phase)
• Metric voltage ratings are
230 VAC, 50 Hz (1- or 3-phase)
Permanent Magnet DC motors
• Voltage ratings are 12/24 VDC,
24 VDC, 90/130 VDC or 130 VDC
• Metric voltage rating is 180 VDC
• Compatible with 90 V controls
(90/130 VDC and 130 VDC only)
Brushless DC (ECM) motors
• Voltage ratings are 24 or 130 VDC
Motor Options
For the comparative
advantages of AC motors and
gearmotors, see page 21.
Variable speed
Pacesetter AC motors
• Voltage ratings are
230 VAC, 60 Hz (3-phase) or
230/460 VAC, 60 Hz (3-phase)
Variable Speed Pacesetter
Inverter Duty AC
30R
Power (HP)
34R
42R
1/25-1/17 1/8-1/4
Torque
(oz-in.)
24-35
Rated Speed
(rpm)
1700
48R
Fixed-Speed
AC
K-2
30R
34R
Permanent
Magnet DC
42R
48R
24A
33A
42A
Brushless
DC
INTEGRA
BLDC
22B
22B
34B
34B
3/8
1/3-3/4 1/1600- 1/200 1/40-1/30
1/15-1/5 1/12-1/4 1/5-1/2 1/50-1/7 1/16-1/3 1/4-1/2 1/16-1/5 1/5-3/8 1/16-1/8
1/4
70-148
222
185-445
38-119
1700,
1800
1700
1700,
1800
0.35-3.2
10-20
48-148 112-296
1200, 1550, 1700, 1800, 1700, 1800, 1700,
1800, 3600
3400
3400
3450
1700,
1800
8-24
2500,
11,500
34-134 101-180 20-50
33-151
25-50
100
2500,
10,000
2500,
10,000
2500
2500
2500
2500
© Copyright 2016. Catalog data subject to change without notice. All rights reserved. Printed in the U.S.A.
2
CATALOG S-17a.3
Bodine Electric Company
Table of Contents
Gearmotors
TORQUE
GEARHEAD
Parallel Shaft
up to 120 oz-in. . . . . . . . . . . . . . . . . . . . . . . . . .
up to 40 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 120 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 210 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 350 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 350 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 1,000 lb-in. . . . . . . . . . . . . . . . . . . . . . . .
up to 1,000 lb-in. . . . . . . . . . . . . . . . . . . . . . . .
Type A/T (K-2) . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . 37
Type D . . . . . . . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . . . . . . . . 36
Type Z . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . . . . . . . . . 36
Type WX . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . 36
Type FX . . . . . . . . . . . . . . . . . . . . . . . . . 8 . . . . . . . . . . . . . . . 36
Type E/F/FX . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . . . . . . . . 36
Type HG . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . 37
Type CG . . . . . . . . . . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . 37
Right Angle
up to 37 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 77 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 121 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 121 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 148 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 296 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 380 lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS
DIMENSIONS
Type 3N/3F. . . . . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . . . 38
Type 5R/5L . . . . . . . . . . . . . . . . . . . . 13 . . . . . . . . . . . . . . . 38
Type 5N . . . . . . . . . . . . . . . . . . . . . . . . 14 . . . . . . . . . . . . . . . 39
Type 5F . . . . . . . . . . . . . . . . . . . . . . . . 15 . . . . . . . . . . . . . . . 39
Type 3RD . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . 39
Type 5H . . . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . 39
Type GB . . . . . . . . . . . . . . . . . . . . . . . 17 . . . . . . . . . . . . . . . 39
Hollow Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Motors Without Gearing
MOTOR TYPE
POWER
Torque Motors . . . . . . . . . . . . . . . . . . . . . . . . .
Variable Speed—AC Pacesetter
Inverter Duty . . . . . . . . . . . . . . . . . . . . . . . . . .
Fixed Speed—AC Induction . . . . . . . . .
Permanent Magnet DC . . . . . . . . . . . . . . .
Brushless DC . . . . . . . . . . . . . . . . . . . . . . . . . . .
Direct Drive Brushless DC e-TORQ . . .
from 3.5 to 68 oz-in.
SPECIFICATIONS
DIMENSIONS
. . . . . . . . 18 . . . . . . . . . . . . . . .
42
from 1/25 to 3/4 HP . . . . . . . . . . 19 . . . . . . . . . . . . . . . 42
up to 1/2 HP . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . . . . . . . 42
up to 1/2 HP . . . . . . . . . . . . . . . . . . 22 . . . . . . . . . . . . . . . 42
up to 1/2 HP . . . . . . . . . . . . . . . . . . 23 . . . . . . . . . . . . . . . 42
up to 3.5 HP . . . . . . . . . . . . . . . . . . 23 . . . . . . . . . . . . . . . 43
Motor Speed Controls
Pacesetter AC Inverters (for 230VAC Motors) . . . . . . . . . . . . . . . . . . . . . . . 24 . . . . . . . . . . . . . . . 43
DC Motor Speed Controls (for 12/24 and 90/130V Motors) . . . . . . . 25 . . . . . . . . . . . . . . . 43
Brushless DC Controls (for 12/24V and 130V Motors) . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . 43
Accessories
system warranty
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Reference Drawings and Dimensions
......................... ...........
36-43
Purchase a Bodine gearmotor and
speed control together and get our
extended 2-year system warranty.
Metric Motors and Gearmotors
Metric Parallel Shaft
up to 0.67 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 11.3 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 11.3 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 19.8 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 35.0 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Metric Right Angle
up to 16.7 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 10.5 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 14.2 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 43.0 Nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Metric Motors without Gearing
up to 140 Watts . . . . . . . . . . . . . . . . . . . . . . . . . . . .
up to 112 Watts . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Most products are marked as
Type A/T (K-2) . . . . . . . . . . . . . . . . 29
Type D . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Type Z . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Type W . . . . . . . . . . . . . . . . . . . . . . . . . 30
Type E/F . . . . . . . . . . . . . . . . . . . . . . . . 31
Type 3F . . . . . . . . . . . . . . . . . . . . . . . . . 31
Type 5N/5F . . . . . . . . . . . . . . . . . . . . 32
Type 5H . . . . . . . . . . . . . . . . . . . . . . . . . 32
Type GB . . . . . . . . . . . . . . . . . . . . . . . . 33
Reference
Fixed Speed—AC Induction . . . 33
Permanent Magnet DC. . . . . . . . . 33
Common Abbreviations
and are
RoHS
Hollow Shaft Gearmotor Benefits . . . 17
Safe Operating Torque
and Speed Area . . . . . . . . . . . . . . . . . . . . . .19
. . . . . . . . . . . . . 20
Comparative Advantages of
AC Motors and Gearmotors
. . . . . . . . . 21
Speed Regulation of
Permanent Magnet DC Motors
. . . . . . 22
COMPLIANT
www.bodine-electric.com
CATALOG S-17a.3
3
Metric Motors
and Gearmotors
Our metric gearmotors and
motors feature metric shafts
and mounting configurations.
AC metric motors are rated at
230 VAC / 50 Hz. Permanent magnet
DC motors are available with
voltage ratings of 180 VDC. Custom
windings can be provided to match
almost any international rating.
We also offer a complete line of
both AC and DC metric right angle
and parallel shaft gearmotors.
Parallel Shaft Gearmotors—Metric
up to 0.67 Nm | Parallel Shaft Gearmotors—Metric
• Metric mounting threads
and shaft dimensions
• Three-wire winding
simplifies reversing
• Impedance protected to
prevent current overload
(gearmotor should not be
stalled when powered up)
A/T
• See page 34 for capacitors
Fixed Speed—AC Gearmotors
Speed
(rpm)
7
42
69
210
Rated Torque
oz-in.
Nm
95
75
45
15
0.67
0.53
0.31
0.11
Power
HP
Watts
1/300
2.8
Rated
Voltage
Freq.
(Hz)
230
50
Current Gear
Radial
Ph
(Amps) Ratio Load (oz.)
1
0.06
180
30
18
6
20
Capacitor
Model
Product Type
(µF/VAC)
Number
CAPACITOR IS REQUIRED
KCI-26T4
N1757
KCI-26A2
N1754
0.4/440
KCI-26A2
N1753
KCI-26A2
N1752
Type K-2A/T
• Unvented gearhousing for
universal horizontal mounting
• Helical primary gear for quietness
and hardened steel spur gearing
on subsequent stages for high
output torque and long life
D
• See pages 34 and 35 for
capacitors and accessories
Fixed Speed— AC Gearmotors
Speed
(rpm)
7.8
23
47
78
117
Rated Torque
lb-in.
Nm
40
40
24
14
9.7
4.5
4.5
2.7
1.6
1.1
Power
HP
Watts
1/48
1/41
1/41
1/41
1/41
15
18
18
18
18
Rated
Voltage
Freq.
(Hz)
230
50
Current Gear
Radial
Ph
(Amps) Ratio Load (lbs.)
1
0.17
0.21
0.21
0.21
0.21
180
60
30
18
12
65
Capacitor
Model
Product Type
(µF/VAC)
Number
30R1BECI-D4
N1562
30R2BECI-D3
N1574
1.3/440
30R2BECI-D3
N1573
30R2BECI-D3
N1572
30R2BECI-D3
N1571
Type 30R-D
Permanent Magnet DC Gearmotors
Speed
(rpm)
5.8
9.6
29
58
144
Rated Torque
lb-in.
Nm
40
4.5
40
4.5
40
4.1
18
2.0
7.3
0.8
Power
HP
Watts
1/49
15
1/49
15
1/32
23
1/32
23
1/32
23
Rated Voltage
180
Current Gear
Radial
0.13
300
0.13
180
0.18
60
65
0.18
30
0.18
12
Product Type
24A2BEPM-D5
24A2BEPM-D4
24A4BEPM-D3
24A4BEPM-D3
24A4BEPM-D3
Model
Number
N1398
N1397
N1395
N1394
N1392
Type 24A-D
“N” model numbers require lead time and minimum quantities.
Visit www.bodine-electric.com for 2D/3D CAD drawings
CATALOG S-17a.3
29
Z
Metric—Parallel Shaft Gearmotors | up to 11.3 Nm
• Aluminum center ring
and endshields
• Unvented gearhousing
• Industrial lip type seals on
motor and output shafts
• Needle bearings on output shaft
• Permanently lubricated with
high-performance lubricant
• Helical pinion accurately cut
on motor shaft for maximum
strength and minimum noise
• 34R-Z: die cast terminal box
with terminal block included
• See page 34 for capacitors
Power
Speed Rated Torque
Rated
Freq.
(rpm) lb-in.
(Hz)
Nm
HP
Watts Voltage
Permanent Split Capacitor, Non-synchronous (TEFC)
7.8
100
11.3
23
100
11.3
Type 34R-Z
1/15
50
230
50
70
40
4.5
233
15
1.7
Power
Speed Rated Torque
Rated Voltage
(rpm) lb-in.
Nm
HP
Watts
24A-Z PMDC Gearmotor
9.6
100
11.3
29
36
4.1
1/32
23
180
Type 24A-Z
58
18
2.0
288
4
0.44
33A-Z PMDC Gearmotor
29
69
7.8
58
35
3.9
1/23
32
180
144
15
1.7
Current Gear
Radial
Ph
0.48
0.5
0.5
0.5
1
Current
(Amps)
125
125
100
100
Gear
Radial
Ratio Load (lbs.)
Product Type
Model
Number
0.18
180
60
30
6
125
125
125
100
24A4BEPM-Z4
24A4BEPM-Z3
24A4BEPM-Z3
24A4BEPM-Z2
N1163
N1161
N1160
N1157
0.33
60
30
12
125
125
100
33A3BEPM-Z3
33A3BEPM-Z3
33A3BEPM-Z2
N6269
N6268
N6266
Type 33A-Z
W
180
60
20
6
Capacitor
Model
Product Type
(µF/VAC)
Number
34R4BFCI-Z4
N1449
34R4BFCI-Z3
N1455
5.0/370
34R4BFCI-Z2
N1453
34R4BFCI-Z2
N1451
Metric—Parallel Shaft Gearmotors | up to 19.8 Nm
• Lubricated for life
• Synthetic lubricant improves
performance, and allows these
gearmotors to operate in a
wide temperature range
• Models with accessory
shafts are ideal for mounting
encoders or brakes
• 34R-W: Die cast terminal box
• Adaptor plate, model 0995,
allows for 3-hole mounting
configuration. See page 34.
Type 34R-W
Power
Speed Rated Torque
Rated
(rpm) lb-in.
Nm
HP
Watts Voltage
Permanent Split Capacitor, Non-synchronous
4.5
175
19.8
21
146
16.5
1/10
75
230
69
53
6
255
14
1.6
Freq.
(Hz)
50
Ph
1
Current Gear
Radial
0.6
312.4
65.5
20.4
5.5
130
130
65
65
Capacitor
Model
Product Type
(µF/VAC)
Number
34R6BFCI-W4
N1477
34R6BFCI-W3
N1484
7.5/370
34R6BFCI-W2
N1481
34R6BFCI-W2
N1478
Type 33A-W
Speed
(rpm)
5.5
18
39
85
125
315
Rated Torque
lb-in.
Nm
175
19.8
151
17.0
78
8.8
39
4.4
27
3.0
11
1.2
Power
HP
Watts
1/23
32
1/14
1/14
1/14
54
1/14
1/14
Rated Voltage
180
Current
(Amps)
0.33
0.41
0.41
0.41
0.41
0.41
Gear
Radial
Ratio Load (lbs.)
312.4
130
97.5
130
43.9
130
20.4
65
13.8
65
5.48
65
Product Type
33A3BEPM-W4
33A5BEPM-W4
33A5BEPM-W3
33A5BEPM-W2
33A5BEPM-W2
33A5BEPM-W2
Model
Number
N6247
N6256
N6254
N6252
N6251
N6249
Control models 1865 (see page 25) and 0865, 0866 (see page 27)
are available for metric gearmotors and motors.
30
CATALOG S-17a.3
• Unvented gearhousing
• All steel gearing
• Industrial lip type seals on
motor and output shafts
• Needle bearings throughout
for increased radial load
capacity and long life
• Permanently lubricated
• 42R-E: Die cast terminal box
E/F
• F-type only: Hardened helical
gearing for quietness and
high output to size ratio
• Dual voltage (230/460V)
models are also available
Power
Speed Rated Torque
Rated
(rpm) lb-in.
Nm
HP
Watts Voltage
Three-phase, Non-synchronous
140
50
5.7
1/5
140
230
4.7
310
35
7.8
341
38.5
23
297
33.6
47
148
16.7
1/7.5
100
230
70
99
11.2
140
50
5.6
280
26
2.9
Split phase Non-synchronous (with centrifugal switch)
47
148
16.7
1/7.5
100
230
Freq.
(Hz)
Ph
50
1
50
50
1
1
Current Gear
Radial
1.1/.61
10
300
0.78
300
180
60
30
20
10
5
200
200
200
300
300
300
300
30
300
0.78
Capacitor
(µF/VAC)
Product Type
Model
Number
42R5BFPP-E2
N1665
42R5BFCI-E4
N1671
42R5BFCI-E4
N1669
42R5BFCI-E3
N1685
42R5BFCI-E3
N1683
7.5/370
42R5BFCI-E3
N1681
42R5BFCI-E2
N1680
42R5BFCI-E1
N1679
42R5BFSI-E3
Type 42R-E
N1653
Speed
(rpm)
5.8
29
43
85
170
170
345
Rated Torque
lb-in.
Nm
310
35
310
35
180
20
120
13.6
60
6.8
68
7.7
32
3.7
Power
HP
Watts
1/5
153
Current
(Amps)
0.85
1
1
1
1
1
1
Rated Voltage
180
Gear
Radial
Ratio Load (lbs.)
300
200
60
200
40
200
20
300
10
300
10
300
5
300
Model
Number
N4275
N4285
N4284
N4282
N4280
N4290
N4279
Product Type
42A5BEPM-E4
42A7BEPM-E3
42A7BEPM-E3
42A7BEPM-E3
42A7BEPM-E2
42A7BEPM-F2
42A7BEPM-E1
Type 42A-E/F
up to 16.7 Nm | Right Angle Gearmotors—Metric
• Industrial lip seals on motor
and output shafts
• Needle bearings on output
shaft for increased radial
load capacity and long life
• Permanently lubricated with
high-performance lubricant
3F
• Bronze gear for high
shock load capability
• Hardened and ground worm
for high strength and long life
• 34R-3F: Die cast terminal box
Power
Speed Rated Torque
Rated
(rpm) lb-in.
Nm
HP
Watts Voltage
35
37
16.7
47
34
4.2
1/15
50
230
70
30
3.8
140
19
2.1
Freq.
(Hz)
50
Ph
1
Current Gear
Radial
0.5
40
30
20
10
40
40
40
5
Capacitor
Model
Product Type
(µF/VAC)
Number
N1491
N1487
7.5/370
34R4BFCI-3F
N1490
N1488
Type 34R-3F
Speed
(rpm)
43
86
172
Rated Torque
lb-in.
Nm
16
1.8
9.7
1.1
5.3
0.6
Power
HP
Watts
1/32
23
Rated Voltage
Current
(Amps)
180
0.18
Gear
Radial
Ratio Load (lbs.)
40
20
40
10
Product Type
24A4BEPM-3F
Model
Number
N1098
N1096
N1094
Type 24A-3F
CATALOG S-17a.3
31
Metric—Right Angle Gearmotors
5N/5F
Metric—Right Angle Gearmotors | up to 12.8 Nm
• Bronze worm gear for high
for strength and long life
encoders or brakes
• AC Gearmotors: Die cast terminal
box with terminal block included
capacitors and terminal boxes
Type 34R-5F
Type 42R-5F and 42R-5N
Power
Speed Rated Torque
Rated
(rpm) lb-in.
Nm
HP
Watts Voltage
34R-5F Gearmotor
23
72
8.1
1/15
35
60
6.8
1/15
50
230
70
39
4.4
1/15
140
21
2.4
1/15
42R-5F Gearmotor
35
93
10.5
1/9
70
60
6.8
1/9
83
230
140
32
3.6
1/9
42R-5N Gearmotor
Three-phase, Non-synchronous
47
109
12.3
1/5
140
230/400
35
113
12.8
1/7.5
100
230
70
74
8.4
Freq.
(Hz)
50
Ph
Current Gear
Radial
1
Capacitor
(µF/VAC)
Product Type
Model
Number
0.5
60
40
20
10
50
50
50
30
N1469
N1468
5.0/370
34R4BFCI-5F
N1466
N1465
80
80
10
N1627
7.5/370
42R4BFCI-5F
N1624
N1623
50
1
0.63
40
20
10
50
3
1/1/.61
30
180
50
1
0.78
40
20
180
—
42R5BFPP-5N
N1633
N1678
7.5/370
42R5BFCI-5N
N1677
Speed
(rpm)
Type 33A-5F
Rated Torque
lb-in.
Nm
33A-5F Gearmotor
43
45
5.1
86
29
3.3
173
17
1.9
345
8.9
1
42A-5N Gearmotor
43
81
9.1
85
55
6.2
172
31
3.5
Power
HP
Watts
Peak
Torque
(lb-in.)
1/14
54
118
100
54
28
1/6
121
177
Rated
Voltage
180
180
Current
(Amps)
Gear
Radial
Ratio Load (lbs.)
Product Type
Model
Number
0.41
40
20
10
5
80
33A5BEPM-5F
N6244
N6242
N6241
N6240
0.85
40
20
10
120
42A5BEPM-5N
N4238
N4236
N4235
Product Type
Model
Number
42A7BEPM-5H
N4299
N4296
Type 42A-5N
5H
Metric—Right Angle Gearmotors | up to 14.2 Nm
Rated Torque
Speed
(rpm) lb-in.
Nm
36
96
126
81
14.2
9.2
Power
HP
Watts
1/5
141
Peak
Torque
(lb-in.)
340
247
Rated
Voltage
Current
(Amps)
180
1
Gear
Radial
Ratio Load (lbs.)
48
18
150
Type 42A-5H
32
CATALOG S-17a.3
up to 43 Nm | Right Angle Gearmotors—Metric
• Hardened helical output gearing
• Bronze worm gear for high
hobbed on the motor shaft for
high strength and long life
encoders or brakes
GB
AC
capacitors and terminal boxes
• 42R-GB: Die cast terminal box
Speed
(rpm)
5
7.4
12
23
Rated Torque
lb-in.
Nm
380
43
375
42
290
33
204
23
Power
HP
Watts
1/7.5
100
Rated
Voltage
Freq.
(Hz)
230
50
Current Gear
Radial
Ph
280
190
1
0.78
200
120
60
Capacitor
(µF/VAC)
Product Type
7.5/370
42R5BFCI-GB
Model
Number
N1266
N1264
N1262
N1260
Type 42R-GB
Speed
(rpm)
6.2
9
14.4
28.8
Rated Torque
lb-in.
Nm
380
42.8
358
40.4
250
28.3
150
17
Power
HP
Watts
1/6
121 /
129
Rated
Voltage
Current
(Amps)
FF
180
0.85 /
0.87
1.6 / 1.0
Gear
Radial
Ratio Load (lbs.)
280
190
200
120
60
Product Type
42A5BEPM-GB
Model
Number
N1366
N1364
N1362
N1360
Type 42A-GB
Metric Motors Without Gearing
• Die cast terminal box with terminal block included with 34R and 42R motors • See page 34 for capacitors and terminal boxes
up to 140 Watts | Fixed Speed AC Induction Motors—Metric
Speed
(rpm)
KCI-26
1250
30R
2850
1400
34R
1400
1400
42R
1400
1400
Rated Torque
(oz-in.) (Nm)
Power
Rated Frequency
Ph
(Hz)
(HP) (Watts) Voltage
Current
Radial
(Amps) Load (lbs.)
Model
Capacitor
Product Type
(µF/VAC)
Number
0.4/440
KCI-26
N1713
N1319
1.3/440
30R2BECI
N1340
3
0.02
1/300
2.8
230
50
1
0.06
5.7
9
18
0.06
0.13
1/39
1/41
19
18
230
50
1
0.38
0.21
18
97
72
0.69
0.51
1/7.5
1/10
100
75
230/400
230
50
3
1
.78/.45
0.6
42
No Capacitor
7.5/370
34R6BFPP
34R6BFCI
N1295
N1291
135
97
0.95
0.68
1/5
1/7.5
140
100
230/400
230
50
3
1
1.1/0.61
0.78
50
No Capacitor
7.5/370
42R5BFPP
42R5BFCI
N1273
N1358
up to 200 Watts | Permanent Magnet DC Motors—Metric
Speed
Rated Torque
Power
Rated
(HP) (Watts) Voltage
(rpm) (oz-in.) (Nm)
33A (Face Mount, Base Optional)
1725
25
0.18
1/23
32
1725
55
0.39
1/11
70
1725
95
0.67
1/6
121
180
3000
55
0.39
1/6
122
3000
80
0.57
1/4
178
42A (Face or Base Mount, Base Installed)
1725
95
0.68
1/6
121
3000
70
0.49
1/5
155
180
1725
120
0.85
1/5
153
3000
90
0.63
1/4
200
FF
Current
Radial
(Amps) Load (lbs.)
1.6 / 1.0
0.31
0.62
0.88
0.89
1.3
1.6 / 1.0
0.85
1.17
1
1.5
AC
Product Type
Model
Number
55
33A3BEPM
33A5BEPM
33A7BEPM
33A5BEPM
33A7BEPM
N6216
N6227
N6237
N6230
N6231
90
42A5BEPM
42A5BEPM
42A7BEPM
42A7BEPM
N4227
N4230
N4237
N4231
DC
CATALOG S-17a.3
33
Accessories
see www.bodine-electric.com for accessory dimensions
“L” Brackets
A
Model No.
A 0969
B 0970
C 0979
D 0980
E 0990
F 5968
AC | DC
C
B
D
F
E
Description
Kit for E, F and FX gearmotors (will not fit 48R-F or 48R-FX)
Kit for WX gearmotors
Kit for 34R and 34B motors
Kit for 34R-Z gearmotors
Kit for 24A motors
Kit for 30R and 33A motors; 30R-D, 24A-D, 22B-D, 24A-Z, 33A-Z and 22B-Z gearmotors
Motor and Gearmotor Kits
A
B, C
F, G
E
D
30°
45°
Model No.
A 0967
B 0977
C 0978
D 0984
E 0985
— 1982
— 1984
— 5982
F 0992
G 0993
H 0995
I
0996
H
I
AC
Description
Base plate kit for 3F gearmotors
IP-44 protection kit for 33A gearmotors and motors
IP-44 protection kit for 42A gearmotors and motors
Die cast terminal box kit for 34R, 42R, 48R, and 33A, 42A motors and gearmotors (DC: does not fit on 12 or 24VDC models)
Oversized die cast t-box kit. Fits capacitor for use with 42R-FX gearmotors. Also fits 42R, 48R, 33A and 42A motors/gearmotors.
Die cast terminal box with terminal block for 30R motors and gearmotors
Die cast terminal box kit with terminal block for 34R, 42R, 48R, 33A and 42A motors/gmtrs. 90/130, 130V and 180VDC models only.
Die cast terminal box for 30R motors and gearmotors
Adaptor plate for mounting brakes or encoders for 33A/42A gearmotors/motors with accy. ready shaft extensions
Adaptor plate for mounting brakes or encoders for 22B/34B gearmotors/motors with accy. ready shaft extensions
3-hole adaptor plate for E, F, WX and FX gearmotors. Provides drop-in replacement for competitive gearmotors.
Base kit for 34R motors and gearmotors
Capacitors
Select the appropriate run capacitor based on the capacitor specifications found on pages 4-21 (29-33 for metric models) and in the tables below.
The AC gearmotor or motor nameplate states the required capacitance of the run capacitor, but it is also critical to specify a capacitor that has
the voltage ratings as shown in these tables. When using a run capacitor that is not supplied by Bodine Electric, please make sure the voltage
rating is equal to or higher than the voltage rating specified on this page. Different motor sizes might require a different minimum voltage rating for
the run capacitor.
Capacitors
Part No.
µF /VAC
Box-Type Metalized Film Capacitor
(Plastic Case)
49400045 1
0.9/250
1.0/250
49400046 1
1.2/250
49400047 1
1.3/250
49400048 1
1.5/250
49400050 1
1.6/250
49400051 1
49401049
0.4/440
49400091
1.3/440
49401047
2.3/250
Box-Type Capacitor
1
Metal Can-Type Capacitor
Part No.
49426812 1
49401015
49401154 1, 3
49401054
49401115 1
49401106
49401006
49401156 3
49401113 1
49401112 1
49401090 1
µF /VAC
4.0/250
5.0/250
7.5/370
10.0/250
6.0/450
9.0/250
12.5/250
15.0/250
20.0/250
27.5/250
30.0/250
Part No.
µF /VAC
49401123 1
3.75/370
5.0/400
49401068 1
12.5/370
49401107 1
15.0/350
49401075 1
49401057
20.0/350
Round Metal Can-Type Capacitor
49401124
25.0/370
45.0/250
49401145 2
40.0/250
49401147 2
10.0/450
49401148 2
Capacitor fits inside terminal box kit model 0984. 2 C
apacitor fits inside oversized terminal box model number 0985. 3 New capacitor part number effective 06/2016.
Capacitor Mounting Clamps
A, B
Model No.
Description
A 54701013 Mounting clamp for round, metal can type capacitor model 49401124
B 54701029 Mounting clamp for round, metal can type capacitors: models 49401145, 49401147, and 49401148
For mounting details and dimensions, visit www.bodine-electric.com
34
CATALOG S-17a.3
Brake Kit for DC Motors and Gearmotor
Model No.
Static Torque (lb-in.)
Volt AC
Ohms
0997
15
120
1067
This item is intended only for 33A and 42A PMDC motors and gearmotors.
DC
Wt. (oz.)
12
Control Accessories
Item Model No. Description
Analog Interface Board for use with model 0810, 0830, and 0850 controls. Allows control to accept a variable voltage
—
0888
or current signal from user’s host controller to automatically control motor speed. Inputs are optically isolated.
Electronic Direction and Braking Board, F-B-R Kit, for use with model 0810, 0830, and 0850 controls. Allows user
—
0890
to change motor direction and to dynamically brake motor to a quick stop. Inputs are not optically isolated. This kit
includes one F-B-R board, one cable and connector, mounting hardware, and two additional braking resistors.
Local/Remote Switch for use with model 0810, 0830, and 0850 controls when used with accessory
—
0893
model 0888. Allows user to switch between automatic and manual operation.
—
0895
Switch Sealing Kit upgrades NEMA-12 brushless DC and PMDC enclosed controls to IP-44 rating.
A
3981
Cable Kit for stock 34B/FV INTEGRAmotors. Length: six feet (3 cables: power, logic and encoder).
Extension Cable for model 3910, 3911, 3921 and 3912 controls. Extends the cable between the motor
B
3982
and control by six feet. Both ends are equipped with circular connections for easy connection
between model 3983 cable assembly or encased control and the motor. Length: six feet.
Connection Cable Assembly for connecting model 3910, 3921 and 3911 chassis controls to stock 130 V
C
3983
motors. One end of the cable is equipped with a circular connector, the other end is equipped with quick
disconnects for phase leads, and a molded connector for the commutation leads. Length: 6 feet.
Analog Interface And Isolation Module for model 3910, 3911,3921 and 3912 controls. Provides Analog
D
3984
interface and isolates controls from system controller input signals which may be at different potentials.
Speed Potentiometer Kit for use with FPM controls. Contains 10k Ohm potentiometer, hardware, wire and connector
—
43300260
for manually regulating motor speed.
Fuse and Speed Potentiometer Kit for use with model 3910 control. Contains potentiometer for manually regulating motor
—
43300270
speed and various fuses to cover the range of motors and gearmotors which can be used with the control.
BLDC
PMDC
A
B
C
D
Metric Accessories
A
Item
A
B
C
D
—
Model No.
0990
1968
1970
1969
—
A
B
—
AC | DC
Metric Motor and Gearmotor Kits
AC | DC
D
Description
Metric Kit for 24A
Metric Kit for 33A motors, and type D and Z gearmotors
Metric Kit for type W gearmotors
Metric Kit for E, F and FX gearmotors (will not fit 48R-F or 48R-FX)
no “L” bracket kits are available for 34R and 34R-Z gearmotors
A
Item
A
C
B
Metric “L” Brackets
B
Model No. Description
1982
Metric die cast terminal box kit for 30R motors and gearmotors
Metric die cast terminal kit with terminal block for 33A, 34R, 42A and 42R motors and gearmotors.
1984
For 90/130, 130V and 180VDC models only.
0991
Metric die cast base kit for 42A motors and gearmotors
0992
Metric adaptor plate for 33A and 42A motors and gearmotors
CATALOG S-17a.3
35
Reference Drawings and Dimensions
Parallel Shaft Gearmotor Dimensions
Dimensions (in inches) are for reference only. For CAD drawings and up-to-date specifications, please visit www.bodine-electric.com.
I
Accessory Shaft
L (on Select Models)
Gearhead
Shaft
DC/BLDC
Lead Exit
A
Shaft Center to
mounting hole (top)
Motor
Diameter
B Width (square)
C Length
Hub
F Length
G Hub Width
Shaft
E Detail
Mounting
K Detail
AC Lead
Gearhead Type D, Z,
WX, E/F, pages 5-9
Exit
Product
Type
D
Shaft Center to
J Mounting Hole
Shaft
Dia.
XH
A
B
C
D
E
F
G
H
I
J
(bottom)
Wt. Length
Shaft
Shaft Hub HHub Mounting
Shaft
Shaft
XH
LengthDiameter Width Shaft
(lbs.)
(Height) (square) Length Diameter Detail Length Width Pattern Center to Center to
Mounting Width Mounting Mounting
Pattern Width
Hole
Hole
(top)
(bottom)
Type D Gearmotor
24A2-D
4.0
24A-D
24A4-D
4.5
22B-D
22B2-D
3.75
22B-D
22B2-D
5.4
INTEGRA
Type Z Gearmotor
34R4-Z4/3
34R6-Z4/3
34R-Z
9.3
34R4-Z2
34R6-Z2
24A4-Z2
24A-Z
5.0
24A4-Z3/Z4
33A3-Z2
33A-Z
5.8
33A3-Z3
22B3-Z2 5.25
22B-Z
22B2-Z4 4.75
22B3-Z4 5.25
22B3-Z2
5.3
22B-Z
22B3-Z3
5.3
INTEGRA
22B2-Z4
4.8
Type WX Gearmotor
34R-WX 34R6-WX 12.0
33A-WX 33A5-WX 9.7
34B-WX 34B3-WX 4.8
Type E/F & FX Gearmotor
34R-FX
34R4-FX 11.0
42R5-FX 14.5
42R-FX
42R6-FX 16.5
48R-FX
48R6-FX 26.0
42A-FX
42A5-FX 14.9
34B3-E
11.0
34B-E/F 34B4-E/F 12.0
34B6-F
14.0
5.887
6.637
5.522
2.378
6.631
2.93
8.328
8.345
7.428
7.445
6.890
7.790
6.895
7.795
6.326
6.746
7.226
7.435
8.335
7.885
2.42
3.42
1.56
.500
Flat
.554
1.125
2.652
.582
1.326
4.02
3.40
1.56
.500
2.42
Flat/
Key
.29
1.125
2.652
.582
1.326
K
Mounting
Detail
[4]10-32
UNF-2B x .38
deep on a
3.75 B.C.
[4]10-32
UNF-2B x .38
deep on a
3.75 B.C.
L
Acc’y Cord/
Shaft Lead
Length
(in.)
Yes
Yes
Yes
24
24
12 or 24
No
None
No
12
Yes
24
Yes
No
Yes
12 or 24
No
None
No
Yes
Yes
12
24
12 or 24
No
12
No
Yes
No
Yes
Yes
24
24
3.39
2.378
3.42
1.56
.500
Flat/
Key
.29
1.125
2.652
.582
1.326
2.93
8.956
8.665
6.473
4.02
3.385
4.02
8.112
9.128
9.565
10.487
9.323
6.629
7.129
8.129
4.02
4.06
2.0
.625
Key
.56
1.31
3.375
.863
1.688
[4]1/4 -28 UNF2B x .50 deep
on a 4.78 B.C.
1.813
[4]1/4 -28
UNF-2B x .50
deep on a
5.13 B.C.
4.73
5.90
4.26
4.64
2.0
4.02
.750
Key
.37
1.536
3.625
.913
[4]10-32
UNF-2B x .46
deep on a
3.75 B.C.
12 or 24
Only the first four characters of the product type are relevant to dimensions.
36
CATALOG S-17a.3
Shaft
DC/BLDC
Lead Exit
B Length
G (square)
I
Hub
E Length
A Height
H
Shaft
D Detail
AC
Lead Exit
J Mounting Detail
Shaft
C Diameter
XH Length
F
Hub
Width
Gearhead Type K-2A/T, 30R-D, pages 4-5
XH
Product
Wt. Length
Type
(lbs.) (square)
Type K-2 Gearmotor
22
2.2
2.539
K-2T
23
2.4
2.664
24
2.7
3.023
23
2.3
2.507
K-2A
24
2.6
2.866
Type 30R-D Gearmotor
30R1
5.8
5.242
30R-D 30R2
6.3
5.492
30R4
7.5
6.000
A
Height
(square)
B
Shaft
Length
C
Shaft
Diameter
D
E
F
G
H
I
Shaft Hub
Hub
Mounting
Shaft Center to Shaft Center to
Detail Length Width Pattern Width Mounting Hole Mounting Hole
Lead/
J
Mounting Cord Length
(in.)
Detail
2.38
1.00
.250
Flat
.255
.52
1.900
.356
.950
[2]8-32
UNC-2A
12
2.38
1.00
.250
Flat
.255
.52
1.900
.356
.950
[2]8-32
UNC-2A
12
3.45
1.56
.500
Flat
.554
1.125
2.652
.582
1.326
[4]10-32
UNF-2B x .38
deep Max.
12
Only the first four characters of the product type are relevant to dimensions
1.50±.03
3.42
0.750
Gearhead Type HG, page 10
XH
A
B
Product Weight Length Diameter Height
Type
(lbs.)
42R-HG 42R6-HG
33A-HG 33A7-HG
9.5
10.5
9.855
10.547
4.73
3.39
9.85
9.80
C
Acc’y
Shaft
No
Yes
2.53
[4] 1/4-20 UNC-2B
2.31
.50 deep min.
on 3.50 B.C.
KEY
45.0°
Accessory
Shaft
(on Select
C Models)
Lead/
Cord
Length
(in.)
12
24
DC
Lead Exit
Motor to
Gearhead
(5.00)
B Height
Motor
A Diameter
AC Lead
Exit
XH Length
B (on Select Models)
Product Weight XH
A
Type
(lbs.) Length Diameter
48R-CG 48R6-CG
42A-CG 42A7-CG
34
29
12.849
12.07
(5.75)
Accessory Shaft
Gearhead Type CG, page 11
5.917
4.262
B
Acc’y
Shaft
No
Yes
Lead/Cord
Length (in.)
.880
DC
Lead Exit
3.000
Motor
A Diameter
12
24
2.375
1.000
KEY
2.375
Key
2.375
(1.09)
(6.81)
3.436
3.70
AC Lead
Exit
[4] 5/16-18 UNC-2B
X .50 MIN. DEEP
.69
XH Length
2.398
(.905)
3.24±.03
CATALOG S-17a.3
[4] 7/16-14 UNC-2B
THRU
37
Right Angle Gearmotor Dimensions
L
Accessory Shaft
(on Select Models)
Gearhead
XH Length
AC/BLDC
Lead Exit
C Width
Motor
Shaft
A Diameter
D Length
Shaft
F Detail
Shaft
E Diameter
Motor
B to Base
Shaft
DC Lead
Exit
G to Base
Mounting
J1
I1
K Detail
J
I
Center of Shaft
H To Base Edge
Gearhead Type 3N/3F, pages 12-13 (Mounts from Gearhead)
XH
A
B
C
D
E
F
Weight Length Dia- Motor Gearhead Shaft
Shaft
Shaft
(lbs.)
meter to Base Width Length Diameter Detail
30R4-3N
34R4-3F
24A4-3F
22B4-3N
22B4-3N
INTEGRA
7.5
9.3
5.3
5.4
7.192
8.61
7.422
7.677
3.34
4.02
2.42
2.378
4.30
4.37
3.57
3.80
5.4
8.79
2.93
3.82
2.871
1.00
.500
Flat
G
Shaft
to
Base
H
I
Base
Length
I1
Base
Width
1.28
1.28
2.56
2.111
XH Length
DC/BLDC
Lead Exit
Cord/
J
J1
K
L
Mounting Mounting Mounting Acc’y Lead
Hole
Hole
Detail
Shaft Length
(in.)
Length
Width
No
12
No
12
[4]1/4 -20
Yes
24
2.00
1.188
UNF-2B x
No 12 or 24
.50 deep
No
None
C Width
Motor
Shaft
A Diameter
D Length
Shaft
F Detail
Shaft
E Diameter
Motor
B to Base
AC Lead
Exit
Shaft
G to Base
24A
Lead Exit
Mounting
K Detail
J
I
J1
I1
Shaft Center to
Mounting Hole
H
Gearhead Type 3F, 5R/5L, pages 12-13 (Mounts from Motor)
XH
A
B
Weight Length Dia- Motor to
(lbs.)
meter Base
Type 3F Gearmotor
24A4-3F
5.3
Type 5R Gearmotor
34R4-5R
11.5
33A3-5R
9.0
Type 5L Gearmotor
42R4-5L
13.5
42A4-5L
14.1
38
C
Width
D
E
F
G
H
I
Shaft
Shaft Shaft Shaft to Shaft Center Base
Length Diameter Detail Base To Mounting Length
Hole
I1
Base
Width
J
J1
Mounting Mounting
Hole
Hole
Length
Width
K
Mounting
Detail
Cord/
Lead
Length
(in.)
7.422
2.42
3.57
2.871
1.00
.500
Flat
1.28
3.14
2.50
3.62
1.25
2.94
[4] ø.28
24
9.206
8.651
4.02
3.39
5.24
4.92
3.568
1.50
.625
Key/
Flat
1.63
3.01
3.88
4.38
3.12
3.38
[4] ø.29
12
24
9.54
9.635
4.73
4.26
5.57
5.54
3.568
1.50
.625
Key/
Flat
1.56
2.856
4.38
5.02
3.62
4.00
[4] ø.30
12
24
CATALOG S-17a.3
K
Accessory Shaft
(on Select Models)
Gearhead
XH Length
DC
Lead Exit
C Width
Shaft
D Length
Motor
A Diameter
Shaft
G Detail
Shaft
E Diameter
Motor
B to Base
AC/BLDC
LeadExit
Shaft
F to Base
Mounting
I1
H1
J Detail
I
H
Gearmotor Type 5N, 5F, 5H, pages 14-16 (Mounts from Gearhead with Feet)
Product
Type
Type 5N Gearmotor
42R5-5N
42R-5N
42R6-5N
42A-5N 42A5-5N
34B3-5N
34B-5N 34B4-5N
34B6-5N
Type 5F Gearmotor
34R-5F 34R6-5F
33A5B-5F
33A-5F
33A5F-5F
Type 5H Gearmotor
48R-5H 48R6-5H
42A-5H 42A7-5H
Wt.
(lbs.)
XH
Length
15.5
17.5
14.3
9.0
10.0
12.0
10.103
10.540
10.198
7.723
8.223
9.233
12.0
9.9
9.9
40.0
24.4
A
B
C
D
E
F
Dia- Motor Gearhead Shaft
Shaft Shaft
meter to
Width Length Diameter to
Base
Base
4.73
G
Shaft
Detail
H
H1
Base Base
Length Width
Cord/
I
I1
J
K
Mounting Mounting Mounting Acc’y Lead
Hole
Hole
Detail
Shaft Length
(in.)
Length
Width
5.64
4.62
5.40
4.02
5.26
10.206
9.711
9.701
4.02
5.28
3.39
4.96
12.928
12.947
5.90
4.26
8.07
7.25
3.568
1.50
.625
1.67
Key/Flat
3.56
3.81
3.00
3.25
[4]ø
.271/.266
Holes
No
12
Yes
No
Yes
No
24
12 or 24
1.50
.625
1.67
Key/Flat
3.56
3.81
3.00
3.25
[4]
ø.271/.266
Holes
No
No
Yes
12
3.568
4.723
2.38
.750
3.000
Key
5.62
6.263
3.875
5.373
[4]ø.41/.44
Holes
No
Yes
12
24
24
L
Accessory Shaft
(on Select Models)
AC/BLDC
Lead Exit
Shaft
H Detail
Motor
A Diameter
Shaft
E Diameter
Motor to
B Base
AC Lead
Exit
Center of
F Shaft to Base
K
Base
Mounting
Detail
XH Length
G
J
Shaft
D Length
Face
Mounting
I Detail
3RD: 4 Holes (red)
J1
Gearhead
C Width
Width: 1.5”; Height 2.31”
Gearhead Type 3RD, GB, pages 16-17
GB:
3 Holes (blue)
XH
A
B
C
D
E
F
G
H
I
J
J1
K
L
Product Wt. Length Dia- Motor Gear- Shaft
Shaft Shaft Shaft to Shaft
Face
Mounting Mounting Base Mounting Acc’y Cord/
Type (lbs.)
Lead
meter to
head Length Diameter to Mounting Detail Mounting
Hole
Hole
Detail
Shaft
Length
Base Width
Base
Hole
Detail
Length
Width
(in.
Center
Type 3RD Gearmotor
30R2
9.0 8.140
30R-3RD
12
3.36 4.812
30R4 10.5 8.640
[4]10-32
24A2
9.0
8.07
UNF-2B x
[4]1/4 -20 UNF-2B
24A-3RD
2.000
2.50
No
1.50
.500
1.562
.625
Flat
2.42 4.147 3.60
24
.31 Deep
.31 deep
24A4 10.5 8.82
Min.
22B2
6.5 8.085
22B-3RD
2.378 4.377
12 or 24
22B4
6.5 9.045
Type GB Gearmotor
42R5 17.5 11.458
[4]1/4 -20 UNF-2B
No
12
42R-GB
4.73 5.06
2.38
.750
.40 Deep Min.
42R6 19.5 11.893
[3 ]5/16
-18
[4]1/4 -20 UNF-2B
Yes
12
33A5 13.6 11.067
2.38
.750
UNF-2B x
.40 Deep Min.
3.00
2.00
2.150
.75
Key
33A-GB
3.39 4.38 3.335
.50 Deep
[4] M6 X 1-6H
33A7 14.9 12.268
2.362
.748
No
24
Max. on
.45 Deep Max.
2.913 B.C.
[4]1/4 -20 UNF-2B
42A-GB 42A5 18.0 11.554 4.26 4.82
Yes
24
2.38
.750
.45 Deep Min.
CATALOG S-17a.3
39
Hollow Shaft Gearmotor Dimensions
K
Accessory Shaft
(on Select Models)
Gearhead
C Width
XH Length
DC/BLDC
Lead Exit
Motor
A Diameter
J
Face
Mounting
Detail
Bore
D Size
Motor
B to Base
Center of
E Bore to Base
H
G
I
F
Mounting
Detail
H1
G1
Center of Bore
to Mounting Hole
Gearhead Type 3F/H, pages 12-13 (Mounts from Gearhead)
XH
A
B
C
D
Wt. Length Dia- Motor to Gearhead Bore
(lbs.)
meter
Base
Width
Size
24A4-3F/H
5.3
7.422
2.42
3.57
22B4-3F/H
5.4
7.677
2.378
3.80
22B4-3F/H
INTEGRA
5.4
8.79
2.93
3.823
3.085
.502
E
F
G
Bore Bore Base
to
to
Length
Base Mtg.
Hole
1.280 1.000
H
H1
Mounting Mounting
Hole
Hole
Length
Width
3.085
2.00
1.188
I
Mounting
Detail
[4] 1/4 -20
UNF-2B x .50
Deep Max.
J
Face
Mount
Detail
K
Acc’y
Shaft
[3] 10-32
UNF-2B
.35 Min.
Deep on
2.125 B.C.
Yes
24
No
12 or 24
No
None
Cord/Lead
Length
(in.)
Gearhead
XH Length
DC
Lead Exit
2.56
G1
Base
Width
C Width
Motor
A Diameter
Face
Mount
F Detail
Bore
D Size
Motor
B to Base
AC Lead
Exit
Face
E Diameter
Gearhead Type 5L/H, page 14 (Face Mount)
Product
Type
Weight
(lbs.)
33A5
42R6
33A-5L/H
42R-5L/H
XH
Length
A
Diameter
9.711
10.540
3.39
4.73
B
Motor
to Base
5.04
5.71
C
Gearhead
Width
D
Bore
Size
E
Face
Diameter
2.740
.627
3.50
F
Face
Mount Detail
[4] 1/4-20 UNF-2B x .44 Min.
Deep on 2.375 B.C.
Lead/Cord
Length (in.)
24
None
Accessory Shaft
J (on Select Models)
AC/BLDC
Lead Exit
Motor
A Diameter
Bore
D Size
Motor
B Diameter
AC Lead
Exit
Center of
E Bore to Base
Mounting
I Detail
F
G
G1
Face
Mounting
H Detail
Gearhead
C Width
XH Length
Type GB/H, page 17 (Face Mount)
XH
Product Wt.
Length
Type (lbs.)
42R-GB/H
33A-GB/H
42A-GB/H
42R5
42R6
33A5
42A5
17.5
19.5
13.6
19.5
11.456
11.893
11.067
11.554
A
B
C
D
Dia- Motor Gearhead Bore
meter to Base Width
Size
4.73
3.39
4.26
E
Bore to
Base
F
G
Mounting
Hole Length
G1
H
I
Mounting Face Mounting Mounting
Hole Width
Detail
Detail
5.06
4.38
4.82
3.335
.752
2.150
.75
3.00
2.00
[3] 5/16-18
[4] 1/4-20
UNF-2B x .44 UNF-2B
Max. Deep on x .40 Min.
2.913 B.C.
Deep
J
Acc’y
Shaft
Lead/Cord
Length
(in.)
No
12
No
Yes
24
24
40
CATALOG S-17a.3
Motor Dimensions
DC/BLDC
Lead Exit
Accessory Shaft
G (on Select Models)
Motor
B Width
Shaft
C Length
Motor
A Diameter
Shaft
F Detail
Mounting
E Detail
AC Lead
Exit
Shaft
D Diameter
XH Length
Motor Type K-2, 30R, 22B, pages 18-19, 23
Product
Type
K2-23
K-2
K2-24
K2-26
K-2 Torque
Model
Motor
0621
30R2
30R
30R4
30R Torque Model
Motor
5625
22B2
22B
22B4
22B2
22B INTEGRA
22B4
Weight
(lbs.)
1.6
1.9
2.2
XH
Length
1.827
2.20
2.50
2.2
2.484
4.75
3.665
2.5
3.5
2.5
3.5
3.610
4.570
4.719
5.679
A
Diameter
Square
B
Width
C
Shaft
Length
D
Shaft
Diameter
2.38
2.38
.62
.188
3.34
3.34
1.06
2.378
2.378
.94
2.93
F
Shaft
Detail
G
Acc’y
Shaft
Lead/Cord
Length
(in.)
[4] 8-32 UNC-2B x .18 Deep Max.
on 2.687 B.C.
Flat
No
12
.313
[4]10-32 UNF-2B x .32 deep Max.
on 3.75 B.C.
Flat
Yes
12
[4] 8-32 UNC-2B x .35 Deep Max.
on 2.625 B.C.
Yes
12 or 24
.375
Flat
No
None
2.93
E
Mounting Detail
G
Accessory
Shaft (on
Select
Models)
33A, 42A Motors/Gearmotors
DC Lead Exit
Motor
B Width
XH Length
Shaft
DC Lead Exit
42R, 33A, 34B
Shaft
C Length D Diameter
[2] 4-40 UNC-2B
.19 Deep Max.
on 1.812 B.C.
Mounting
Detail
E
Motor
A Diameter
AC Lead
Exit
Mounting Holes for Accessory Ready Models
34R, 42A
F
Shaft
Detail
E
Mounting
Detail
[4] 6-32 UNC-2B
.19 Deep Max.
on 2.844 B.C.
Motor Type 34R, 42R, 33A, 42A, 34B, pages 19-23 (Face Mount)
34R
42R
33A
42A
NEMA 42C
42A
NEMA 42CZ
34B
Product
Type
34R4
34R6
42R3
42R5
42R6
33A3
33A5
33A7
42A5
42A7
42A5
42A7
34B3
34B4
34B6
Weight
9.0
7.75
11.0
13.0
5.1
6.28
7.45
11.3
14.5
11.3
14.5
6.0
7.0
9.0
XH
Length
5.526
6.526
5.616
6.679
7.116
5.140
6.200
7.401
6.656
7.781
6.656
7.781
4.043
4.543
5.543
A
Diameter
B
Width
(PMDC)
C
Shaft
Length
D
Shaft
Diameter
4.02
—
1.25
.375
4.73
—
1.38
.375
.347
.375
.500
3.39
3.75
1.125
1.48
3.39
3.75
1.48
4.26
4.25
1.62
.500
1.31
4.02
—
1.625
.500
E
Mounting Detail
F
Shaft
Detail
G
Acc’y
Shaft
Lead/Cord
Length
(in.)
[4] 1/4-20 UNC-2B x .31 Min.
Deep on 2.75 B.C.
Flat
No
12
[4] 1/4-20 UNC-2B x .31 Min.
Deep on 3.75 B.C.
Flat
No
12
[4] 10-32 UNF-2B x .25 Min. Deep
on 2.75 B.C.
Flat
Yes
24
Yes
24
Yes
12 or 24
[4] 1/4-20 UNC-2B x .31 Min.
Deep on 3.75 B.C.
[4] 1/4-20 UNC-2B x .31 Min.
Deep on 2.75 B.C.
Flat
Flat/Key
Flat
CATALOG S-17a.3
41
Motor Dimensions
J
Accessory Shaft
(on Select Models)
XH Length
42A ONLY
DC/BLDC
Lead Exit
Mounting
F Detail
Shaft
Shaft
C Length D Diameter
Motor
A Diameter
Motor
Lead
Exit
B to Base
48R ONLY
Mounting
Shaft
E Detail
I
H
G
F Detail
H1
(NEMA-56C
G1
Face Mount
and/or Base Mount)
Motor Type 42R, 48R, 42A, pages 18-22 (Base Mount)
42R
XH
A
B
C
D
E
Product Weight Length Diameter Motor Shaft
Shaft
Shaft
(lbs.)
Type
to
Length Diameter Detail
Base
42R3
7.8
5.616
42R5
11
6.679
4.73
4.999
1.38
.375
Flat
42R6
13
7.116
F
Face Mount Detail
G
G1
Base Base
Length Width
H
Mtg.
Hole
Length
Lead/
H1
I
J
Mtg. Base Acc’y Cord
Hole Mtg. to Shaft Length
(in.)
Width Face
Base mount 42R
motors have no face
mounting holes
2.88
4.75
2.25
3.50
1.572 None
12
12
42R
Torque
Motor
Model
2628
12.5
6.201
4.62
4.93
1.31
.375
Flat
[4] 1/4-20 UNC-2B x .31
Max. Deep on 3.75 B.C.
2.88
4.75
2.25
3.50
1.569
48R
48R5
48R6
17.0
20.0
7.329
7.797
5.90
5.85
2.06
.625
Key
[4] 3/8-16 UNC-2B x .50
3.50
5.75
2.75
4.25
1.446 None
12
48R
Torque
Motor
Model
0632
20.5
6.676
5.73
5.85
2.06
.625
Key
[4] 3/8-16 UNC-2B x .50
3.50
5.75
2.75
4.25
1.446
2.00
12
42A
42A5
42A7
11.3
14.5
6.656
7.781
4.26
4.77
1.62
.500
Flat
2.88
4.75
2.25
3.50
1.471
1.28
24
[4] 1/4-20 UNC-2B x .31
1.56
24A Motors/Gearmotors
Mounting Holes for Accessory Ready Models
3.50
Accessory Shaft
K (on Select Models)
XH Length
L
Shaft
Mounting
Slots
C
Flange
Width
[2] 4-40, UNC-2B
.19 Deep Max. on 1.812 B.C.
Shaft
D Length E Diameter
Motor
(.96)
A Diameter
Motor
B to Base
Shaft
Lead
Exit
G
I
H
J
Shaft
Detail
F to Base
Mounting Hole
To Motor Face
I1
H1
Motor Type 24A, page 22 (Base/Flange Mount)
24A
XH
A
B
C
D
E
F
G
H
H1
I
I1
Product Wt.. Length Dia- Motor Flange Shaft
Shaft Shaft Shaft Base Base
Base
Base
Type (lbs.)
meter
to
Width Length Diameter to
Detail Length Width Mounting
Mounting
Base
Base
Hole Length Hole Width
24A0
2.0 3.240
2.41
.94
0.312
1.98
Flat
2.25
3.62
1.25
3.00
24A2
2.5 3.870 2.42 3.185
24A4
3.0 4.620
J
.625
1.62
1.81
Lead/
K
L
Acc’y Mounting Cord
Slots Length
Shaft
(in.)
Yes
0.181W x
0.257L on
2.764 B.C.
24
42
CATALOG S-17a.3
Standard products for demanding applications
Gearmotors
Controls
Bodine offers a complete line of right angle,
parallel shaft, and hollow shaft gearmotors with
torque ratings from 6-1,000 lb-in. (0.7-113 Nm).
All gearmotors
are available as
fixed-speed AC,
variable-speed AC,
permanent magnet,
and brushless
DC models.
Our motion controls
are precisely
engineered to
provide maximum
performance
from our motors
and gearmotors.
page 24-28
Bodine designs and
manufactures a
complete line of permanent magnet DC controls
for 90/130V PMDC motors, and brushless DC
controls for 24V and 130VDC motors. We also
offer 3-phase AC inverter controls.
pages 4-17
(metric 29-33)
INTEGRAmotors™
Bodine’s unique INTEGRAmotor combines a
motion control, a brushless DC motor and
a gearhead in one compact package. They
provide simplified
wiring, reduced
panel space, faster
assembly times and
lower system costs.
eTORQ™
Bodine’s high performance, high torque direct
drive system is ideal
for applications
that demand high
efficiency, very
compact design
and enclosed
construction.
page 23
Presented by:
AN
NA
MA
AG
Y
GEE
YM
M
M
LLIITT
A
A
NTT
EEN
ISO
9001:2008
TE
ST
EM
YS
M
SY
S
201 Northfield Road
Northfield, IL 60093 U.S.A.
Tel: 773.478.3515
Fax: 773.478.3232
Toll Free: 1.800.726.3463
[email protected]
TIIFFIIE
RT
ED
ER
DQ
CE
C
QU
U
bodine-electric.com
RoHS
COMPLIANT
07481101.A.3 © Copyright 2016 Bodine Electric Company. All rights reserved.

Metric Gearmotors and Motors

Transcription

Similar documents

A4 B-V sfondo:Layout 1

Light Options – There are 3 dual LED strips in the

TC-143 Service Manual - Fabco Automotive Corporation

Differential Air Shaft

Torre de Collserola

Information Technology Solutions

LONGFIELD™ 30 SPLINE Super Set

UNIMOUNT® 125 Close-Coupled Pump Motors

Borg-Warner T-10 Build/tips (Part 1)