Attachments, Options, Accessories

Attachments, Options, Accessories
THE
CONTENTS
ATTACHMENTS, OPTIONS, ACCESSORIES
Quick Change Implements
Implement Hitch
Tail Weight Counterbalance
Rotary Broom
Gauge Wheels
Debris Blower
Loader Bucket
Dozer Blade
42” Two-Stage Snow Blower
36” Snow Blower
Snow Options
Operator Soft-Cab
Front Cab Extension Flap
Snow Blower Side Extensions
Tire Chains
Cold Start Kit (MT)
Attachments
Boom Sprayer
BedShaper®
Perfaerator™
40” Spring Tine Dethatcher
Chipper/Shredder
Coulter Blade Edger
Operator Compartment Options
Headlights
Comfort Seat
Suspension Seat
Armrests
Instrument Panel Cover
Speed-Up Kit
Grass Handling Options
Dump Bag
Removable Dump Boxes
6.7 or 7.0 Bushel Catcher Assemblies
GHS Exhaust Screen with Large Holes
GHS “No-Catch” Deflector
Hi-Dump®
Power Dump
Blower Lockout Kit
Case Hardened Blower
Deck Options
Manual Deck Height Adjuster
Mechanical Deck Lift
Power Deck Lift
52” Mulch Kit
Shear Pins, Shear Bolts, Deck Height Washers
Curb Jumper Ramp
EZ Pin Puller
Break Away Blades
Tire Options
Foamed Rubber Deck Tire
Narrow Drive Tire
Wide Drive Tire
Low Profile Drive Tire
All-Terrain Drive Tire
Single Wide Tail Wheel
Tail Wheel Lock
Spread Axle Tail Wheels
Walk Behind Options
Quick-Change Sulky
Strut Kit
Extras
Touch-Up Paint
Decals
Videos
Walker Clothing & Collectibles
Compatibility Chart
- www.walkermowers.com -
4
4
5
5
6
6
7
8
8
9
9
9
9
9
10
10
11
11
12
12
13
13
13
13
13
13
14
14
14
14
14
15
15
15
15
16
16
16
16
17
17
17
17
18
18
18
18
18
18
18
18
19
19
19
19
19
19
Back Cover
The Versatile Walker
When we first designed the Walker Mower, the goal was to build the best possible
lawn mower. But as the design progressed, it was apparent the compact, highly
maneuverable tractor could do other jobs with other attachments. Walker owners tell
us the versatility of the Walker tractor is one of the features they like best.
Walker owners also like to select options and accessories to
make the Walker best fit their application. The full line of
options shown in this catalog has been developed to help
you do just that.
One of our primary goals in developing attachments
and options for the Walker is to avoid obsolescence of
earlier units. A high percentage of the items shown in this
catalog will fit earlier units. On a side note, many of the
improvements on the newest Walkers may be upgraded on earlier units. Ask your
Walker dealer about upgrade kits.
Take a long, slow look through this catalog. There are many ways to make your
Walker do more, work better on your job, and fit the individual owner. To find a
Walker dealer near you, call 1-800-279-8537 or visit www.walkermowers.com.
Sincerely,
Bob Walker, President
P.S. To see many of the items shown in this catalog in action, request the 13-minute
Accessory Video (P/N 6895-15)
Walker Manufacturing Company • 5925 E. Harmony Road • Fort Collins, CO 80528 • (970) 221-5614
- www.walkermowers.com -
VersatileWalker
STORY
THE
THE
Quick-Change Implement Hitch System
Implement
HITCH
Five implements mount interchangeably on the Walker tractor using the
quick-change hitch system. The hitch assembly replaces the mower deck
and installs on the tractor in less than a minute. Implements then slide onto
the hitch and lock in place with the flip of a lever for true “quick change”
capability. The hitch assembly also includes operator footrests and an electric
power lift-just the touch of a switch raises and lowers implements. The lift
control switch is quadrant mounted on the Forward Speed Control lever for
convenient operation. Item IH6620
1
Page 5
Page 6
Page 6
Page 7
5
Page 8
2
3
1
Lift Control Switch
2
Operator Footrest
4
Implement Hitch
3
Hitch Locking Lever
5
Power Lift Actuator
Application Notes
4
•
Compatible with Rotary Broom (Page 5), Debris
Blower (Page 6), Loader Bucket (Page 6), Dozer
Blade (Page 7), and 42” Snow Blower (Page 8)
•
Tail weight counterbalance is required for lifting
implements. See Tail Weight options.
Tail Weight Counterbalance
Tail weight counterbalance is required to lift front-mounted implements
(all implements using quick-change hitch and the SB36A). Also improves
handling when using large decks on SD models. The cast-iron weight
bolts directly to the chassis frame and does not interfere with dumping
the grass catcher or raising the tractor body.
Model Usage
MB
MS
MC
MD, MT
MD, MT
4
Part No.
4647-1
4647-2
5637-1
5647*
7647
7647-5
Description
Tail Weight (LH)
Tail Weight (RH)
Tail Weight (80-lb)
Tail Weight (80-lb)
Tail Weight (85-lb)
Extra 10-lb Tail Weight
(Fits P/N 7647)
* Not compatible with 9.5 Bushel Catcher on Model MC
Rotary
BROOM
Recommended Use:
Snow
Hard
Lawn
Surface Thatch
Five Position
Angle Head
Adjusts from
Seat
Gauge Wheels
Two side-mounted 6” wheels limit depth of engagement when
using the broom for lawn sweeping and dethatching. P/N I391
Rotary Broom
A Rotary Broom with 47-inch sweeping path and five-position
angle head is ideal for sweeping debris or light snow on hard
surfaces and for lawn dethatching and raking. In addition
to dethatching turf, the broom does a great job of sweeping
and removing gravel and debris from turf areas along roads,
paths and playing fields.
Down pressure is spring weighted and is adjustable for best
sweeping action and minimum brush wear. Includes parking
stands to protect bristles when not in use. Optional gauge
wheels recommended for lawn dethatching to control depth
of engagement. Item RB6650
Application Notes
•
Requires Implement Hitch (IH6620)
•
Requires Tail Weight Counterbalance (Page 4)
•
Gauge Wheels recommended for lawn dethatching
5
Recommended Use:
Debris
BLOWER
Hard
Leaf
Surface Cleanup
Debris Blower
The 13-1/2” Debris Blower delivers
125-MPH velocity with a 230˚
manual directional control. Useful
for landscape cleanup and leaf
removal. Item DB6680
Application Notes
Hand crank controls
direction of air stream
with swivel head.
•
•
Requires Implement Hitch (IH6620)
Requires Tail Weight Counterbalance (Page 4)
Loader
BUCKET
Loader Bucket
Recommended Use:
6
Stone &
Gravel
Mulch
Loose
Dirt
A versatile tool for landscaping work, the Loader Bucket will push, scoop,
haul and grade dirt, stone, gravel and mulch. Lifts approximately 180-lbs
and 2-1/4 cubic feet of material with 14” ground clearance for transport.
Bucket has high-strength steel cutting edge and tilting action uses a 500-lb
electric ram. Item LB6690
Application Notes
•
•
Requires Implement Hitch (IH6620)
Requires Tail Weight Counterbalance (Page 4)
Dozer
BLADE
Recommended Use:
Snow
Loose
Dirt
Dozer Blade
The 46-inch Dozer Blade with
five-angle
positioning
and
spring trip action is useful for
moving snow, loose dirt, and
gravel. The Dozer Blade has a
high-strength, replaceable steel
edge. Item DB6660
Five Position
Angle Head
Adjusts from
Seat
Application Notes
•
Requires Implement Hitch (IH6620)
•
Requires Tail Weight Counterbalance (Page 4)
•
Front Cab Extension Flap recommended when using
Dozer Blade with Operator Soft Cab (Page 9)
7
42” Snow
BLOWER
42” Two-Stage
Snow Blower
Throws
Snow up to
40 Feet
The powerful, high-production,
two-stage 42” Snow Blower
throws snow up to 40 feet and
is recommended for Model
MD and MT tractors. Quick,
easy operation is enhanced by
a power lift (hitch system) and
adjusting the discharge spout
180˚ from the operator seat.
Optional Operator Soft Cab
is recommended to offer allweather capability with the snow
blower. Item SB6670
Application Notes
•
Requires Implement Hitch (IH6620)
•
Requires Tail Weight Counterbalance (Page 4)
•
Optional Operator Soft Cab Recommended (Page 9)
36” Snow
BLOWER
36” Single-Stage Snow Blower
Just the right size to tackle sidewalks and driveways, the
Single-Stage Snow Blower mounts directly in place of the
mower deck in a few minutes. Throws snow up to 20 feet
with its high speed, clog-resistant auger even when working
in wet, slushy conditions. The discharge chute rotates 180˚,
adjustable from the operator seat, and a manual lever lifts
the blower for transport. A replaceable, hardened steel scraper
blade and adjustable skid shoes provide good clearing action.
Item SB36A
Match with the
Model MB for a
Strong, Versatile
Performer
8
Application Notes
•
Use of Narrow Drive Tires and Wheels - P/N 5033-2
recommended to fit tread width within 36” swath
(Page 18)
•
Requires Tail Weight Counterbalance (Page 4)
•
Mounts directly on the tractor in place of
mower deck (Implement Hitch not required)
•
Lift Plate Kit (P/N 4300-2) required to mount on
Model MB
Snow
OPTIONS
Application Notes
•
Not compatible with the Single-Stage Snow
Blower (SB36A) when used on Model MD or MT
•
Front Cab Extension Flap recommended
when using Operator Soft Cab with Dozer
Blade (See Below)
Operator Soft-Cab
The Soft-Cab is designed to shield the operator from winter weather
when using the 42” Two-Stage Snow Blower (SB6670), 47” Rotary Broom
(RB6650) and 46” Dozer Blade (DB6660). The cab features a hinged door
for operator entry, glass windshield, electric windshield wiper and headlights.
A removable canvas flap attaches to the rear of the cab and covers the
open area between the operator seat and top of the catcher box or dump
box. Cab design allows the tractor body to be raised for maintenance. Item
SC5661 for Model MC and SC8660 for Model MD/MT.
Front Cab Extension Flap
When using the 46” Dozer Blade (DB6660) with
the Operator Soft Cab (SC5661 or SC8660), an
optional extension flap protects the operator’s legs
from the elements. The flap is not recommended
for use with the implements using a drive shaft–42”
Two-Stage Snow Blower (SB6670) and 47” Rotary
Broom (RB6650). P/N 7661-4
Snow Blower
Side Extensions
Extends 36” Snow Blower to
40” swath, allowing the use
of 8.50 width tires with chains.
P/N 5634 (1 Pair)
Tire Chains
Cold Start Kit (MT)
Simple, mechanical
release of the
transmission drive to
remove transmission
drag from engine starter
load when cranking in
cold weather (below
40˚F). Note: This is
a standard feature on
Model MD. P/N 8638
Tire Chain kits include
1/2” wheel spacers
(P/N 8070-31) to
provide extra frame
clearance with chains
installed.
Tire
Size
18x6.50-8
18x8.50-8
18x9.50-8
Part
No.
5675
5675-2
5675-3
Description
Tire Chains w/ Spacer
Tire Chains w/ Spacer
Tire Chains w/ Spacer
9
Boom Sprayer
Boom
SPRAYER
If there is mowing, there usually is a need for spraying. The Boom Sprayer easily mounts
on all 42-, 48-, 52-, 56-, and 62-inch decks and offers a 96” spray pattern. A spray
gun with a 20-ft hose and adjustable spray tip allow the operator to spray a mist or
adjust to a 35-ft stream. The 25-gallon tank contains a sump that allows easy cleaning
of the tank and spray system. Item SP6640
96”
Spray
Pattern
Spray Gun
Application Note
•
Mounting to the 52- and 62-inch carrier frames requires
ordering two (2) P/N B037 Rear Sprayer Supports
Bed
SHAPER
BedShaper®
Quickly establish and easily maintain
sharp edges on flower beds, trees, sand
traps and other landscape areas with the
BedShaper® attachment. The powerful,
notched blade slices through the turf to
create a clean, removable edge. The angle
of the cut and the concave shape of the
blade leave the remaining sod strip intact,
free and easy to remove for faster, easier
clean-up without tools. Edges up to 100’
per minute. Item BS8630
Clean,
Sharp Edges up to
100’
Per Minute
10
Before
After
Aerate up to
60,000 Square
Feet per hour
The
PERFAERATOR™
Perfaerator™
A 41-1/2-inch turf aeration pattern is
delivered by the Perfaerator’s twelve
tines. The camshaft design drives the
tines up to 2-1/2” deep into the soil
with no additional weight needed. The
PTO-driven tines engage and disengage
easily to skip over sprinkler heads and
sidewalks without slowing down and
easily lock into a raised position for
secure transport. Item PA6685.
Transport/Retracted
Position
Operating
Position
Application Note
•
Uses its own integrated footrest and attachment
platform (no Implement Hitch needed)
•
Replaceable tine ends
40” Spring
Tine Dethatcher
A favorite tool for spring cleanup, the Dethatcher easily clips
on the front of 36-, 42-, or 48inch decks without fasteners or
tools. When used with the GHS
vacuum, lawn thatch and debris
are removed and collected in one
pass. A lift lever with foot trigger
raises and lowers the dethatcher.
Item DT40
Remove Thatch
and Vacuum Debris
In One Pass
Spring Tine
DETHATCHER
11
Chipper/Shredder
Chipper
SHREDDER
The handy Chipper/Shredder attachment uses the GHS blower to discharge chipped
material into the grass catcher for clean, easy debris removal. The combination of the
Chipper/Shredder with the Walker tractor allows the chipper to be brought to the job
instead of dragging trimmings to the chipper. Item CS6120
Make Instant
Mulch
Application Notes
Coulter Blade
EDGER
•
Mounts directly on the tractor (no Implement Hitch
required)
•
Recommended with Model MD, MTL25, MT26, MTL31
•
Maximum wood diameter is 3 inches
Coulter Blade Edger
The Edger uses a self-tracking coulter disc on a swing arm to smoothly
and quickly trim grass along the concrete edge of sidewalks, curbs and
walking paths. Simple mechanical blade engagement (no hydraulics)
and a single-point, quick-mount bracket on the Model MT and MD
tractors make this an easy-to-use attachment. Item EG7800
Edge Curbs up to
4 MPH
Turf Side
Curb Side
Quick Mount
Bracket
12
Headlights
Operator
Finish mowing after dark. Sealed
halogen beam lights are mounted
within a shock-absorbing housing.
Lights are positioned to provide
excellent operator visibility of the
area being mowed. Item P/N 5989
for MB/MS/MC and P/N 7989-1 for
MD/MT
COMPARTMENT
Comfort Seat
Suspension Seat
Armrests
The Comfort Seat is a built-up (not
molded) seat with a steel frame,
extra-thick foam padding and
removable/replaceable Cordura®
covers.
Optional armrests
available (see table). P/N 6103-5
The Suspension Seat offers fullspring suspension with dampening
and has adjustments for back
angle, bottom angle and operator
weight-the ultimate in comfort.
Optional armrests available (see
table). P/N 6103-10 for MS, P/N
6103-25 for MC, MD, MT. Note:
Includes one-inch longer steering
handles to compensate for higher
seating position.
Extra operator comfort and security,
especially when working on slopes;
folds up when not in use.
Instrument Panel
Cover
Protects Model MD/MT instrument
panel when parked in rain or snow.
P/N 7307-2
Seat
Type
Standard
Comfort
Suspension
Armrest
Kit No.
5885
6103-17
6103-9
Speed-Up Kit
Increases maximum ground speed from 5 MPH to 6.5 MPH by changing
transmission drive gear ratio. P/N 7247 for MD,
P/N 8247 for MT
MD
Kit
MT
Kit
Application Notes
•
Not recommended for beginning operators due to
increased sensitivity of steering levers
•
Model MTL (25- and 31-hp) units are equipped
from the factory with 7 MPH maximum ground speed
13
Dump Bag
Grass
HANDLING
Reusable, fabric bag fits over the back door
opening of the 6.7, 7.0 and 9.5 bushel grass
catcher and allows clippings to dump directly
into the bag. Reinforced, sewn-on handles make
it easy to lift and move the bag and dump into
a disposal container. The woven polypropylene
material is lightweight and strong, easy to handle
and durable. Folds to a compact size when not in
use. P/N 5598 (9.5), 5598-1 (6.7/7.0)
Removable Dump Boxes
Two molded polyethylene boxes split the weight of the 9.5 bushel
catcher when dumping. Operators working by themselves will find
this method of handling clippings easier, especially when lifting
and dumping wet grass into another container. Item 8510-2
6.7 or 7.0 Bushel Catcher Assemblies
Replaces the 9.5 catcher
assembly on Model MD
and MT tractors (S/N 9731199 and On) with lower
profile 7.0 bushel catcher.
Available as factory-installed
option or complete assembly
easily interchanges with the
original catcher with “bolton” replacement. P/N 75022 for Model MD and MT.
Note: The 6.7 Catcher is an
available factory-installed option when ordering a Model MC or use
P/N 5502-3 to order assembly only.
GHS Exhaust Screen w/ Large Holes
3/4”
Holes
Mow in
Wet
Grass
GHS “No-Catch” Deflector
Allows GHS Models to easily convert from grass collection to “no
collection” rear discharge mowing. The deflector quickly installs in
the door opening of the grass catcher and offers spreading action of
clippings comparable to rear discharge and convertible deck designs
used on other mowers. In some applications, it eliminates the need
to switch to a side discharge mower deck (side discharge still offers
the best spreading action in heavy cutting and is better suited to
mowing rougher areas).
14
GHS Catcher Size
6.7 Bushel
7.0 Bushel
9.5 Bushel
Deflector Kit No.
5500
7500
8500
For working in wet conditions, the GHS Exhaust Screen with
Large Holes allows more air to flow through the GHS system
to prevent clogging and to boost vacuum action.
P/N 6512-3 (6.7 Catcher), 7512-3 (7.0 & 9.5 Catcher)
Application Notes
•
Easily interchanges with standard screen
•
Not recommended for use in dry conditions
Raises Catcher
Box Up
Grass
HANDLING
67 Inches
Hi-Dump®
Raising the catcher box up 67 inches (170 cm) and
dumping into a truck or trailer is easily completed in a
20-second cycle with the Hi-Dump®. Powered by a 12volt electric/hydraulic system (operating two cylinders), the
lifting and dumping functions work independently and are
controlled by two toggle switches from the operator seat.
Item HD8400
Application Notes
•
Can be ordered as Factory Installed Option
or installed in field by kit
•
For use on Model MD and MT only
Easily control
“Lift” and
“Dump”
functions
from seat
Dump Lift
L
Power Dump
Installing the Power Dump on the Model MD/MT provides the convenience
and time savings of dumping the grass catcher from the operator seat. A
toggle switch operating a 12-volt electric ram provides the dumping and
door opening action with a 9 to 10 second cycle time.
Model
Catcher
Kit
Usage
Size
Part No.
MD, MT 7.0 Bushel
7620-13
MD, MT 9.5 Bushel
8620-1
Door opens
and closes
automatically
as the catcher
raises and
lowers
Application Notes
•
Can be ordered as Factory Installed Option or installed in field by kit
•
For use on Model MD and MT only
Blower Lockout Kit
A simple lockout releases the blower to prevent engine drag
when using side discharge and mulching decks or rotary
implements. P/N 6541 (10” blower) or 7541 (10.5” Blower)
Dump Catcher
Box from the Seat
Case Hardened Blower
Directly replaces the 10-inch blower assembly or blower scroll
on the 10.5-inch blower with a case-hardened (heat treated)
assembly or scroll. This blower offers 2 to 3 times longer
life and wear resistance when mowing grass in areas with
abrasive soil and sand. P/N 6542-15 (10” Blower Assembly)
or 7542-6 (10.5” Blower Scroll)
15
Deck
OPTIONS
Adjust
Cutting Height
From the
Seat
Deck Height Adjuster
Enjoy on-the-go cutting height adjustment from
the operator seat. A single hand lever is used on
36-, 42- and 48-inch decks, and a foot pedal is
used on larger decks.
Deck Size
36”
42”
48”
52”
62”
Kit No.
8639
8640
8641
8643
8644
Application Note: 48” kit is required for DML42A deck
Deck Lift Options
Raises the deck to a “transport” position. Useful for transporting on large jobs between mowing areas to prevent deck “wear and tear”,
especially when using lower cutting heights. Also works nicely to intermittently raise the deck when vacuuming thick layers of leaves.
Mechanical Deck Lift
Power Deck Lift
Kit installs actuating lever on mower body and linkage
to carrier frame to manually raise and secure the deck in
transport position. P/N 8645 or P/N 4645 (MB)
For Model MD/MT, the Power Deck Lift uses a 12-volt electric ram
actuated by a toggle switch and two lift cables to raise the deck
assembly for transport (for deck sizes up to 48”). P/N 8655
52” Mulch Kit
Configures the 52” Side Discharge Deck (DSD52) for
mulching operation (no discharge). Kit includes an upper
mulching blade, blade mount saddle and bolt-in baffles.
This kit is easily installed allowing quick conversion to
mulching and back to side-discharge. P/N 8691
16
Shear Pins
Shear Bolts
Deck
OPTIONS
Keep a supply of shear protection pins and bolts handy for the PTO drive
and mower blades.
Part No.
F202
F002
Description
Blade Hub Shear Bolts
Shear Bolt Nut
Usage
All Decks Except
DSD52 & DSD62
8067-13
PTO U-Joint Shear Pin,
Standard Hardness (Set of 5)
‘98 and On Decks
and Attachments
8067-10
PTO U-Joint Shear Pin,
Optional extra hard pin
(Set of 5)
‘98 and On Decks
and Attachments
Curb Jumper Ramp
Molded polypropylene, 40-inch wide curb ramp allows all Walker models to
easily back over a standard curb for access to curbed areas. And when not
in use, the ramp stows on the 42- and 48-inch deck as an expanded footrest.
In fact, some customers report the footrest function is more important to
them than the ramp. Designed with
molded handle for easy lifting and
carrying. P/N 5597 (Standard), P/N
5597-1 (decks equipped with a deck
height adjuster)
Break Away Blades
Deck Height Washer
Extra 1/4-inch thick
washer shims may be
installed on the four
deck support pins to
adjust cutting height in
1/4-inch increments
(finer adjustment than
standard 1/2-inch).
Deck
Size
36, 42
48, 56
Washer
Part No.
5727-1
Washer
Dimensions
1/4” x 5/8” x 1-3/8”
No.
Req’d
4
52, 62
74
8727
1/4” x 13/16” x 1-3/4” 4
EZ Pin Puller
A quick, easy way to
remove and install
height adjustment pins.
Stows below catcher
box on frame when not
in use. Standard on all
52-, 62- and 74-inch
decks; but a handy
option for all decks.
P/N 8770
For use in mowing applications with lots of ground
and debris contact, the optional Break Away Blade
Kits help minimize impact and shock loading on
the PTO driveline. Blades are mounted on a
break-away hub.
Deck
DSD42
DSD48
DSD56
DSD74
Kit No.
5705-33
7705-8
5705-32
5705-34
Application Note: Uses a common replacment
blade for all decks, P/N 5705-30
17
Deck Tire
Tire
OPTIONS
Foamed Rubber Tire
Replaces standard pneumatic deck tire for applications where puncture-resistance
is important. The solid-rubber tread offers good wear characteristics and has
some “springiness” like a pneumatic tire for a smoother ride. P/N 5715-11 Tire
Only or P/N 5715-3 for Tire and Wheel Assembly
Application Note
• Mounts interchangeably on the same wheel as the
pneumatic tire
Drive Tire
Narrow Drive Tire
Wide Drive Tire
Low Profile Drive Tire
All-Terrain Drive Tire
18x6.50-8 tire and wheel, two
each required, used when a
36” mower deck or 36” snow
blower is installed on MB, MC,
MT or MD tractor. P/N 5033-2
18x8.50-10 tire and wheel,
two each required, used to
upgrade Model MS with a 42”
deck installed. P/N 5075
18x10.5-10 tire and wheel,
two each required, extra
wide tire with turf tread offers
improved flotation, traction
and hillside stability for Model
MC, MD, MT and MW. LowProfile design minimizes rubber
sidewall flex for a more solid
feel. P/N 8075
18x11.0-10 tire and wheel,
two each required, aggressive
bi-directional, extra wide tread
offers best hillside traction and
handling for Model MC, MD,
MT and MW. P/N 8070-6
Application Note
• Standard tire on Model MS
Application Note
• Standard tire on Model
MB, MC and MW
Application Notes
• Use with 48” or larger deck
Application Notes
• Use with 48” or larger deck
• 1/2” Wheel Spacer
(P/N 8070-31) Required
• 1/2” Wheel Spacer
(P/N 8070-31) Required
Rear Tire Options
Single Wide Tail Wheel Tail Wheel Lock
Spread Axle Tail Wheels
Toggle switch on Forward Speed Control actuates locking
solenoid on tail wheel pivot; locks the tail wheel pivot into
“straight ahead” position. This feature is especially useful when
working on slopes. The handling, traction and stability of the
mower are significantly increased by eliminating tail wheel pivot
on a side slope. Also, the tail wheel lock assists in making a
straight stripe mowing pattern on large areas-only small steering
lever corrections are needed to make a nice straight stripe. the
lock is easily engaged and disengaged with the toggle switch
and it may be manually overridden by a hard pull on the steering
levers. For Model MD and MT only. P/N 8540
18
Replaces standard dual tail
wheel tires on Model MD/MT, for
applications cutting high in soft
grass where the dual tire track is
objectionable. P/N 8049
Spread tail wheels to track behind
drive tires and offer a smoother
ride. P/N 4420-3 (MB), 7420-3
(MD/MT), 7420-8 (add’l parts for
MD), 7420-20 (wheel assembly)
Application Note
• Single Wide Tire slightly
increases turning resistance
Application Note
• Reduces maneuverability
in tight spaces due to tail
wheel swinging out
Strut Kit
Quick-Change Sulky
The convertible Sulky attaches to the Model MW walkbehind and allows the operator to switch from walking or
riding in a few easy steps with no tools. The spread axle
with dual caster wheels is positioned comfortably behind
the mower chassis for walking operation and extends to the
riding position using one wing nut. The operator footrest
retracts when not in use and drops down providing a nice,
stable ride when in the riding position. Item SA9500
Installs a solid connection between
the tractor and deck; handles more
like a conventional walk-behind and
improves traction on slopes. The
tail wheel is removed and replaced
with a kickstand in order to retain
the deck tilt-up function. P/N 9360
Walk Behind
OPTIONS
Retractable
kickstand
replaces tail
wheel
Application Note
•
Strut Kit not usable with Quick-Change Sulky
Touch-Up Paint
Decals
Keep your Walker looking its best with
genuine Walker paint.
The Walker Mower logo decals
are available for professional
mowing companies to proudly
display the brand of equipment
used. Decals are outdoor quality,
easily attached to vehicles, trailers,
walls and windows.
Part No.
5866
5867
Description
Yellow, 12 oz. Aerosol
Metallic Gray, 12 oz. Aerosol
The
EXTRAS
Videos
A properly trained operator starts with good training
aining
materials. The 22-minute “How to Mow/How to
Maintain” video is offered to supplement operating
instructions found in the owners’s manual. One copy
is furnished with each new mower, but an extra copy
or Spanish version is useful for additional training
requirements. Part No.
Description
5895-6
5895-15
5899-1
5899-2
VHS, English
PAL, English
VHS, Spanish
PAL, Spanish
b
a
a
b
c
Part No.
5800-2
5800-10
5800
Description
12” x 15” Walker Mower Vehicle Decal
8” x 15” Walker Logo
4” x 7-1/2” Walker Logo
c
Walker Clothing & Collectibles
A complete line of Walker wearables and collectibles is
available from Walker Ware. Request a catalog today or
visit www.walker-ware.com or Call 1-888-204-0048
19
TRACTOR ATTACHMENTS ITEM NO.
36” Snow Blower
(SB36A) ◊
Quick Change Implement Hitch
(IH6620)
42” Snow Blower
(SB6670) ◊
MODEL MB
MODEL MS
•
MODEL MC
MODEL MD
MODEL MT
•
•
•
•
•
•
•
•
•
•
•
13-1/2” Debris Blower
(DB6680) ◊
•
•
•
•
47” Rotary Broom
(RB6650) ◊
•
•
•
•
46” Dozer Blade
(DB6660) ◊
•
•
•
•
•
•
•
•
•
▲
•
•
Loader Bucket
(LB6690) ◊
Chipper/Shredder
(CS6120)
Perfaerator™
(PA6685)
BedShaper
®
Coulter Blade Edger
•
•
(BS8630)
•
•
•
(EG7800)
•
•
•
Operator Soft Cab
(SC5661 or SC8660)
•
◊ Tail Weight recommended for this implement—see details under Tractor Options • Requires change to Narrow Drive Tires (18 x 6.50-8)
•
•
▲ Use on 25-hp and higher
TRACTOR OPTIONS
TIRES
MODEL MB
MODEL MS
MODEL MC
MODEL MD
MODEL MT
•
•
•
•
•
•
Narrow Drive Tire (18 x 6.50-8)
Wide Drive Tire (18 x 8.50-10)
•
•
•
•
All-Terrain Drive Tire (18 x 11.00-10)
•
•
•
•
Low-Profile Drive Tire (18 x 10.50-10)
•
•
•
•
•
•
•
OPERATOR COMPARTMENT
Comfort Seat
•
•
Suspension Seat
•
•
•
•
•
Armrest
•
•
•
•
•
Headlights
•
•
•
•
•
Instrument Panel Cover
•
•
Speed-Up Kit
•
•
Cold Start Kit
•
•
•
•
•
•
DECK CONTROL
Mechanical Deck Lift
•
•
•
Power Deck Lift
TAIL WHEEL
Single Wide Tail Wheel
•
•
Tail Wheel Lock
•
•
•
•
Spread Axle Tail Wheels
•
Hi-Dump® (7.0 & 9.5 Bushel Catchers)
•
•
Power Dump (7.0 & 9.5 Bushel Catchers)
•
•
6.7 or 7.0 Bushel Catcher Assembly
•
•
•
Removable Dump Bins (9.5 Bushel Catcher)
•
•
•
GHS “No-Catch” Deflector
•
•
•
•
GHS Exhaust Screen w/ Large Holes (3/4”)
•
•
•
•
Printed in USA
GRASS HANDLING
ITEM NO.
40” Spring Tine Dethatcher
(DT40)
Boom Sprayer
(SP6640)
Foamed Rubber Deck Tire
DSD
36
DGHS
36
DSD
42
•
•
•
DGHS
42
DML
42A
•
DGHS
48
DSD
48
DSD
52
•
DSD
62
•
•
DSD
74
•
•
•
•
•
•
•
•
•
•
•
Interchangeable Mulching Baffles
•
•
Curb Jumper Ramp
EZ Pin Puller
DSD
56
•
•
•
•
•
•
•
•
•
•
•
•
• Requires two (2) Rear Sprayer Support, P/N B037 ▲ Standard on this Model
5925 E. Harmony Road • Fort Collins, CO 80528 • (970) 221-5614
www.walkermowers.com
▲
•
▲
▲
P/N 6895-17
DECK ATTACHMENTS/
OPTIONS
05/06
• Standard on this Model