2qr000 assembly instruction 2qr000

FEATURES:
- Brass Construction
- 2 Way Diverter Valve
- Mixer control
- Factory preset at 38ºC (100.4ºF)
- Temperature range from 15ºC (59ºF) to 60ºC (140ºF)
- Safety stop with override function
- Flow Rate 6.0 gpm@ 50 psi
160516
ASSEMBLY INSTRUCTION
2QR000
TEMPERATURE CONTROL VALVE WITH BUILT-IN SERVICE STOPS AND VOLUME CONTROL VALVE
99
3 7/8"
123
4 13/16"
1/2” FPT
1/2” FPT
1/2” MPT
[40]
1 9/16" Min Finished Wall
59
2 5/16" Max Finished Wall
79
3 1/8"
146
5 3/4"
2QR000
REMOVAL OF FAUCET:
Always turn the water supply off before removing the existing faucet or disassembling a valve. Open both faucet handles to relieve water pressure
and to ensure that the water has been successfully turned off.
CONTACT US:
If you need assistance with installation, replacement parts or have any questions regarding your Rubinet product,
please call a Customer Service representative at: 905-851-6781 toll free 1-800-461-5901 or visit www.rubinet.com
CARE OF FAUCET:
The use of warm water and a soft cloth is all that is required to clean Rubinet products. The patina of our living finishes (Oil Rubbed Bronze &
Tuscan Brass) will change as a result of normal use. Applying Mineral Oil on occasion will create a softer look, subtle color changes and character.
2QR000
1
2QR000
2
FINISHED WALL
Shower
Head
3 7/8˝
or
Spout
Hand
Shower
MINIMUM FINISHED WALL LIMIT
MAXIMUM FINISHED WALL LIMIT
Turn Off
Hand Shower
Ø 2˝ HOLE
Shower Head
or
INSTALL
CAP OR
VOLUME CONTROL
(see page 1)
Spout
APPROX 3 1/4˝
COLD
HOT
PIPE CLAMP
RECOMMENDED
FOR ROUGH-IN
OR
APPROX 4 1/2˝
LEAVE OPENING FOR ACCESS TO STOPS
WHEN CUTTING THE WALL TILES
IMPORTANT* OPEN
OUTLET MUST BE
CAPPED OR
CONNECTED TO
VOLUME CONTROL IF
TUB FILLER IS USED
* PROTECTIVE COVER MUST NOT BE REMOVED WHEN PLASTERING AND/OR TILING.
FACTORY CALIBRATED POSITION
(at 38°C / 100°F)
Red marks should be aligned
at 12 O’Clock position
* If PEX piping is to be used, do not use PEX with a diameter
of less than 3/4˝ FOR MAXIMUM FLOW FROM THE VALVE.