DDM4v11 - Daniel Defense

Transcription

n DEFENDING YOUR NATION, DEFENDING YOUR HOME.™
DDM4v11
2015
CONTENTS
TORTURE WORKS 02
COMPLETE FIREARMS 04-29
UPPER RECEIVER GROUPS
30-33
RAIL SYSTEMS
34-41
HAMMER FORGED BARRELS
42-45
MUZZLE DEVICES
48-49
FURNITURE, PARTS & ACCESSORIES
52-55
APPAREL56
TRADITION,
EVOLVED.
®
Equipment changes. Bonding with friends, connecting with nature, challenging yourself,
teaching a child respect and responsibility... these things do not. Whatever hunting
means to you and your family, get more out of the experience with the latest AR-15 style
hunting rifles from Ambush Firearms. They are lighter, more dependable, more accurate
and more customizable than any traditional rifle. Available in your choice of 5.56mm,
6.8 SPC, or 300 BLK for whatever game you hunt, all backed with lifetime warranties and
responsive customer service.
Check out our website, or call us today for more informationabout seeing the future
without forgetting the past.
When I started Daniel Defense I never
imagined we would have grown the
company into what it is today. Over the
last decade we have seen tremendous
growth as a company, and that is because
of you, the customers we serve. While
AMBUSH 6.8
AmbushFirearms.com
101 Warfighter Way, Black Creek, GA 31308
Phone (855)AMBUSH-2
Find Us On
there have been down times in the market
and political attacks on our right to keep
and bear arms, you have always remained
loyal to the brand that we have built
together. I speak for every employee at
Daniel Defense in saying “thank you”. We
stand eternally committed to offering you
the very best small parts, accessories,
rails, rifles and customer service in the
firearms industry. Regardless of whom we
are making rifles for, we only make them
one way:
to the highest standards in the firearms
industry.
MARTY DANIEL
PRESIDENT AND CEO OF DANIEL DEFENSE
© Daniel Defense, Inc. All rights reserved. We continuously strive to offer the best possible products to our customers, therefore all specifications subject to change without notice.
2015
5
As the finale of 2012’s Torture Test 2, 35lbs of explosives were placed under a vehicle to simulate
an IED exploding during a convoy. The rifle survived, less the plastic butt stock as shown to the
left, and with the slightest tweaking of the buffer tube, was able to be fired without issue.
Why take a perfectly good rifle and come up with as many ways
as possible to destroy it? Three reasons- 1. Because we at Daniel
Defense constantly strive to test and improve our products; 2.
Because you can’t truly evaluate a product’s performance until you
find ways to push it to failure; and 3. Because it’s a hell of a lot of
fun! Follow the links below to see DD rifles buried, dropped, frozen,
drowned, dragged, even dropped from helicopters, and placed in the
middle of explosions!
Buried in mud
Covered in sand
Dragged behind vehicles
Frozen solid
See the original DD Torture Test at...
https://danieldefense.com/TortureTest >
< Watch the brutal testing continue at
https://danieldefense.com/ddm4-torture-test-2
DANIEL DEFENSE.COM 866.554.GUNS
2015
7
The original Daniel Defense Rifle, The Daniel Defense M4 Carbine created the definition of tactical perfection. Every aspect
of this rifle was engineered with the professional and shooting enthusiast in mind. Built to redefine the benchmark in
small arms performance, this precision crafted firearm will perform faithfully in any Military, Law Enforcement, Homeland
Security, or Personal Defense Environment. Available in your choice of either an M4 or Lightweight profile barrel.
One of the V1’s most visible attributes is its proprietary front sight base, CNC-machined from 4140 steel, finished
with a salt bath nitride surface treatment, and featuring a serrated curved design to minimize glare.
Like all DDM4 models, the V1 features Daniel Defense’s beveled and flared magazine well for faster, more secure
reloads.
The DDM4 Rail™ 12.0 FSP on the DDM4v1 provides
extra rail space beyond the carbine front sight base
for the mounting of lights or other accessories as
well as giving the user more room for an extended
shooting grip.
SPECIFICATIONS // DDM4V1
Also available with a lightweight profile barrel.
V1 M4 // MFG# 02-050-15027
V1 LW // MFG# 02-050-15125
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
16.0”
CHROME MOLY VANADIUM STEEL
COLD HAMMER FORGED, CHROME LINED
M4 OR LIGHTWEIGHT
1:7”
CARBINE
DD IMPROVED FLASH SUPPRESSOR
32.25”
6.70 LBS
5.56 NATO (5.56X45MM)
DDM4 RAIL™ 12.0 FSP
AVAILABLE COLOR
BLACK
2015
9
The DDM4v3 combines the benefits of the original DDM4v1 with the advantages of a mid-length gas system. Built around
a 16” Cold Hammer Forged barrel and our proprietary front sight base with serrated, curved design, the V3 provides
shooters with a 9” free-floating DDM4 Rail™ quad rail, and a vertical foregrip for better weapon manipulation.
Like the V1, the V3 provides a solid, reliable, and advanced proprietary front sight block, CNC-machined from 4140
steel, finished with a salt bath nitride surface treatment, and featuring a serrated curved design to minimize glare.
The V3’s lightweight DDM4 Rail™ is free-floating and offers 4 rotation-limited QD sockets.
The V3’s mid-length DDM4 Rail™ provides an uninterrupted top rail and
ambidextrous rotation-limited QD sockets. The mid-length gas system
makes it a soft and controllable shooter.
V3 GOV // MFG# 02-108-15174
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
16.0”
GOVERNMENT
1:7”
MID-LENGTH
32.25”
6.49 LBS
5.56 NATO (5.56X45MM)
DDM4 RAIL™ 9.0
AVAILABLE COLOR
BLACK
2015 11
The DDM4v5 complete rifle is one of the most popular models, lightweight, and can serve any role from competition
to home defense. It features the DDM4 Rail™ 12.0 and 16” mid-length Cold Hammer Forged barrel with pinned low
profile gas block. The design combines the accuracy of a rifle-length sight radius with the smooth-shooting mid-length
gas system. The 12” quad rail provides plenty of real estate for customization to include the mounting of lights, lasers,
sights, and grips.
The rifle length DDM4 Rail™ is lightweight and mounts to the upper receiver via the latest 4-bolt version of
Daniel Defense’s patented Bolt-Up System.
The V5’s free-floating DDM4 Rail™ has a narrow profile that increases comfort while keeping
weight to a minimum.
Daniel Defense Rail Panels with signature DD pattern
provide a more comfortable soft-touch grip and shield
your hand from excess heat. The Daniel Defense fixed
sights are available separately; see the “accessories”
section.
Available in our exclusive MilSpec+™ or Daniel Defense Tornado™ Cerakote.
V5 GOV // MFG# 02-123-16029-047
V5 LW // MFG# 02-123-16138-047
Also available with a lightweight profile barrel.
V5 LW, MILSPEC+ // MFG# 02-123-13028-047
V5 GOV, TORNADO // MFG# 02-123-22176-047
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
16.0”
GOVERNMENT OR LIGHTWEIGHT
1:7”
MID-LENGTH
32.25”
6.44 LBS
5.56 NATO (5.56X45MM)
DDM4 RAIL™ 12.0
AVAILABLE COLORS
BLACK
MILSPEC +™
DANIEL DEFENSE TORNADO™
2015 13
The DDM4v7 features the Daniel Defense Modular Float Rail 12.0, which provides each shooter with the ultimate in
modular adaptability. This carbine comes with a 16” mid-length Cold Hammer Forged barrel and pinned low profile
gas block. The MFR’s slick profile features three 3” modular Picatinny sections that can be placed anywhere along the
rail system.
The MFR™ 12.0 rail can be run “slick” to give absolute minimal weight, or by using the included picatinny rail
sections, the user can customize exactly were accessories are mounted.
Like all DDM4 Rifles, the V7 is built around Mil-Spec forged 7075-T6 aluminum receivers, with rich black hard
annodizing, and laser-engraved markings.
The smooth, lightweight MFR™ 12.0 allows the shooter to fully
customize the placement of accessory rails. The Daniel Defense fixed
sights are available separately; see the “accessories” section.
Also available with a lightweight profile barrel or with our exclusive MilSpec+™ Cerakote.
V7 GOV // MFG# 02-128-20010-047
V7 LW // MFG# 02-128-22160-047
V7 GOV, MILSPEC+ // MFG# 02-128-12026
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
16.0”
1:7”
MID-LENGTH
32.25”
6.54 LBS
5.56 NATO (5.56X45MM)
MFR™ 12.0
AVAILABLE COLORS
BLACK
MILSPEC +™
2015 15
The DDM4v9 rifle satisfies the needs of shooters demanding an extended quad rail for use in popular shooting sports as well
as tactical and defensive applications. The DDM4 Rail™ 15.0 gives operators the option to have the support hand extended
close to the muzzle, allowing them to drive the gun more precisely and prevents over travel when transitioning between
multiple targets. The 16” Cold Hammer Forged barrel with mid-length gas system results in a smoother recoil impulse for
quick, but precise rapid fire and reduced wear on parts.
The DDM4 Rail™ 15.0 provides the V9 with a long sight radius for precision shooting with iron sights. The long
expanse of Picatinny rail allows the user to customize exactly where accessories are mounted.
Like all DDM4 Rifles, the V9 is built around Mil-Spec forged 7075-T6 aluminum receivers, with rich black hard
annodizing, and laser-engraved markings.
The 15” DDM4 Rail enables the shooter to have an extended sight
radius when mounting fixed sights. The Daniel Defense fixed sights
are available separately; see the “accessories” section.
Lightweight profile 16.0” barrel shown in Daniel Defense Tornado™ Cerakote
Strength-to-Weight profile 18.0” barrel
V9 GOV // MFG# 02-145-15175-047
V9 LW // MFG# 02-145-16030-047
V9 S2W // MFG# 02-145-02036-047
V9 LW, TORNADO // MFG# 02-145-01035-047
BARREL LENGTH: 16.0” OR 18.0”
BARREL MATERIAL: CHROME MOLY VANADIUM STEEL
BARREL TYPE: 16.0” - COLD HAMMER FORGED, CHROME LINED
18.0” - COLD HAMMER FORGED, SALT BATH NITRIDE
BARREL PROFILE: 16.0” - GOVERNMENT OR LIGHTWEIGHT
18.0” - STRENGTH-TO-WEIGHT (S2W™)
RIFLING TWIST: 1:7”
GAS SYSTEM LENGTH: MID-LENGTH
MUZZLE DEVICE: DD IMPROVED FLASH SUPPRESSOR
OVERALL LENGTH: 32.25”
WEIGHT (UNLOADED): 6.59 LBS
CALIBER: 5.56 NATO (5.56X45MM)
RAIL SYSTEM: DDM4 RAIL™ 15.0
AVAILABLE COLORS
BLACK
2015 17
The DDM4v11 was designed for shooters who prefer the benefits of the KeyMod attachment system integrated in the new
SLiM Rail™ (Slim Lightweight Modular).
The 15” rail, with Keymod attachments at 3, 6 and 9 o’clock, offers incredible ergonomics, weight savings, superior
cooling and modularity, while giving operators the option to have the support hand extended out closer to the muzzle. An
uninterrupted Picatinny rail on top allows for maximum sight radius with rail-mounted iron sights. The 16” Cold Hammer
Forged barrel with mid-length gas system results in a smoother recoil impulse for quick, but precise rapid fire and reduced
wear on parts.
The DD SLiM Rail™ is incredibly lightweight and long enough to allow a comfortable grip no matter the
operator’s shooting position. The Keymod interface provides a low-profile interface for mounting accessories.
Like all DDM4 Rifles, the V11 features our new stock and grip. Combining ergonomic shapes with soft-touch
rubber overmolding, the new DD furniture provides a secure grip and comfort in all weather conditions.
The smooth, lightweight SLiM Rail™ 15.0 features
Keymod interfaces at 3, 6, & 9 o’clock allowing
the shooter to fully customize the placement of
accessories. The Daniel Defense fixed sights are
available separately; see the “accessories” section.
Also available in our exclusive MilSpec+™ or Daniel Defense Tornado™ Cerakote.
V11 GOV // MFG# 02-151-20026-047
V11 LW // MFG# 02-151-30032-047
V11 GOV, MILSPEC+ // MFG# 02-151-00257-047
V11 GOV, TORNADO // MFG# 02-151-23026-047
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
16.0”
1:7”
MID-LENGTH
32.25”
6.28 LBS
5.56 NATO (5.56X45MM)
SLiM RAIL™ 15.0
AVAILABLE COLORS
BLACK
MILSPEC+™
2015 19
The DDM4v11 Pro Series was designed for competitors looking to
dominate podiums in today’s popular multi-gun matches. Built around
our newest 18” Strength-to-Weight, Cold Hammer Forged barrel, this
platform delivers the speed, controllability, and precision required to engage the course designer’s most difficult
stages. The new Muzzle Climb Mitigator redirects propellant gasses through calibrated ports, countering both
recoil and muzzle climb. Combined with the softened recoil impulse of a rifle length gas system, results equal
shorter split times, more precise follow-up shots, and reduced fatigue. A Geissele Automatics Super Dynamic 3
Gun Trigger delivers rapid hits on target with its light, short pull and quick reset. Competitors will also appreciate
the larger latch provided by a Vltor BCM Gunfighter Mod 4 Charging Handle for easier manipulation under
magnified optics.
Recoil and muzzle rise are drastically reduced by the new DD Muzzle Climb Mitigator Gen II.
Ready for competition right out of the box. The DDM4V11 PRO comes with the super high performance Super
Dynamic 3-Gun trigger from Geissele Automatics.
The V11 Pro features a rifle length gas system combined with the new
Muzzle Climb Mitigator Gen II, providing the smoothest and flattest
shooting possible.
SPECIFICATIONS // DDM4V11 PRO
V11 PRO // MFG# 02-151-12033-047
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH/WEIGHT:
TRIGGER:
CALIBER:
RAIL SYSTEM:
18.0”
COLD HAMMER FORGED, SALT BATH NITRATE
STRENGTH-TO-WEIGHT (S2W™)
1:7”
RIFLE LENGTH
DD MUZZLE CLIMB MITIGATOR, GEN II
32.25” / 7.53 LBS
GEISSELE SUPER DYNAMIC 3 GUN (SD-3G®)
5.56 NATO (5.56X45MM)
SLiM RAIL™ 15.0
AVAILABLE COLORS
BLACK
2015 21
“Whether it’s for a soldier on the battlefield or for home
defense, we only make our rifles one way: to the highest
possible standard. Because lives depend on it.”
- Marty Daniel
Photos Courtesy US Department of Defense
2015 23
Use what “THEY ” use. The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM,
and a 10.3” Cold Hammer Forged Barrel. The MK18 rail system features the patented Bolt-Up System attachment system
and has been rigorously tested prior to fielding by USSOCOM (currently over 20,000 units). The MK18 Factory SBR is
unmatched in size, weight, and performance. Class III dealers only. All NFA rules apply.
The RIS II Rail mounts to the receiver using our miltary-tested and adopted 6-bolt Bolt-Up System, providing an
incredibly strong user-serviceable interface, a free-floated barrel, and an uninterrupted top rail.
The weapon of choice for state & federal law enforcement agencies and special operations forces.
Photo Courtesy US Department of Defense
The Daniel Defense Rail Interface System II (DD RIS
II) was designed at the request of the United States
Special Operations Command (SOCOM) for the
SOPMOD II weapons system. After years of rigorous
testing by Special Forces Operators, Daniel Defense
was selected as the Sole Source Provider of the RIS
II to SOCOM. The Daniel Defense fixed sights are
available separately; see the “accessories” section.
The DDMK18 is available with either FDE or Black RIS II rail,
or coated in our exclusive MilSpec+™ Cerakote.
SPECIFICATIONS // DDMK18 SBR
This firearm is a regulated item by the National Firearms Act (NFA). Please check with your local
and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to
make sure they comply with all NFA rules and applicable laws.
MK18 SBR, FDE // MFG# 02-088-17024
MK18 SBR, BLACK // MFG# 02-088-07327
MK18 SBR, MILSPEC+ // MFG# 02-088-15028-011
(CLASS III DEALER ORDERS ONLY)
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
10.3”
GOVERNMENT
1:7”
CARBINE LENGTH
26.75”
5.88 LBS
5.56 NATO (5.56X45MM)
MK18 RIS II
AVAILABLE COLORS
BLACK
MILSPEC +™
2015 25
The public deserves to own the same firearms we offer the military. The M4A1 from Daniel Defense represents a
combat-proven rifle, and features a 14.5” hammer forged barrel inside the RIS II Rail System trusted for use by US Special
Operations Command (SOCOM) since 2005.
The DD M4A1 is built around a cold hammer forged 14.5” chrome lined M4 profile barrel. We pin an extended
DD improved flash suppressor to the end to bring the overall barrel length to just over 16”, avoiding the NFA
regulation and transfer tax.
The M4A1 configuration is part of the SOCOM “Block II” carbine kit and is currently used by a wide variety of
U.S. forces. Photo Courtesy US Department of Defense
The M4A1 Rail Interface System II (RIS II) attaches to the receive by means of DD’s battle-proven Bolt-Up
System. The Daniel Defense fixed sights are available separately; see the “accessories” section.
SPECIFICATIONS // DDM4A1
The M4A1 is also available finished in Daniel Defense’s exclusive Mil Spec+ Cerakote.
M4A1 // MFG# 02-088-06027-011
M4A1, MILSPEC+ // MFG# 02-088-15126-011
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
14.5”
M4
1:7”
CARBINE LENGTH
DD IMPROVED FLASH SUPPRESSOR EXTENDED, PINNED
31.50”
6.74 LBS
5.56 NATO (5.56X45MM)
M4A1 RIS II
AVAILABLE COLORS
BLACK
MILSPEC +™
2015 27
Introduced in 2014, The DD MK12, chambered in 5.56 NATO, gives the shooter greater effective range, as would be
expected from a firearm conceived from the need for a semi-automatic, Special Operations Forces precision rifle. A
product of innovative design and advanced manufacturing techniques, the MK12 from Daniel Defense features an 18”
Stainless Steal Barrel that is Cold Hammer Forged for a longer life and even greater accuracy.
The MK12’s Cold Hammer Forged 18” stainless steel barrel (salt bath nitride) and stainless MK12 low profile
gas block (black oxide) are designed and built to provide the ultimate in durability, performance, and corrosion
resistance.
The DD MK12 provides incredible trigger control and feel thanks to its two-stage Super Semi-Automatic (SSA®)
trigger from Geissele Automatics.
The DDM4 Rail™ 12.0 provides a continuous upper rail platform allowing the shooter to mount
any optic of choice while allowing a longer sight radius for back-up sights.
SPECIFICATIONS // DDMK12
Also available in Daniel Defense Tornado™ Cerakote with bead-blasted stainless barrel.
The 18” Cold Hammer Forged Stainless Steel Barrel and MK12 Gas Block are
designed to US Special Operations Command (SOCOM) specifications.
MK12 // MFG# 02-142-13175-047
MK12, TORNADO // MFG# 02-142-01198-047
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
18.0”
STAINLESS STEEL
COLD HAMMER FORGED, SALT BATH NITRIDE
MK12
1:7”
RIFLE LENGTH
34.50”
7.41 LBS
5.56 NATO (5.56X45MM)
DDM4 RAIL™ 12.0
AVAILABLE COLORS
BLACK
2015 29
The DD MK18 Pistol is a variation of the MK18 SBR which has been extremely popular within the Law Enforcement and
Special Operations communities. A newly-designed pistol receiver extension classifies it as a Pistol and not a Short Barreled
Rifle (NFA regulated items require ATF approval and a tax stamp). It features the MK18 RIS II and a 10.3” Cold Hammer
Forged barrel with carbine length gas system, the same length commonly used for CQB operations. The MK18 Pistol
by Daniel Defense is unmatched in size, weight, and performance and is available with a Black or FDE Type III Hard Coat
Anodized Rail System.
The Daniel Defense fixed sights are available
separately; see the “accessories” section.
The Daniel Defense 300 Pistol, chambered in 7.62 x 35mm, is a variation of the 300 SBR and is ideal for close quarters
and home defense. A newly-designed pistol receiver extension classifies it as a Pistol and not a Short Barreled Rifle
(NFA regulated items require ATF approval and a tax stamp). This new option from Daniel Defense comes complete
with a 10.3” Cold Hammer Forged Strength-to-Weight barrel, pistol length gas system, pinned low profile gas block,
and DDM4 Rail™ 9.0.
SPECIFICATIONS // DDMK18 PISTOL
MK18 PISTOL, FDE // MFG# 02-088-06030
MK18 PISTOL, BLACK // MFG# 02-088-01202
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
10.3”
GOVERNMENT
1:7”
CARBINE LENGTH
27.00”
5.40 LBS
5.56 NATO (5.56X45MM)
MK18 RIS II
SPECIFICATIONS // 300 PISTOL
AVAILABLE COLOR
BLACK
300 PISTOL // MFG# 02-088-22179
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
10.3”
STRENGTH-TO-WEIGHT (S2W®)
1:8”
PISTOL LENGTH
DD IMPROVED FLASH SUPPRESSOR (.30CAL)
27.00”
5.30 LBS
300BLK (7.62X35MM)
DDM4 RAIL™ 9.0
AVAILABLE COLOR
BLACK
2015 31
The Daniel Defense DDM4ISR (Integrally Suppressed Rifle) 300 joins our family of precisioncrafted M4 Rifles. The ISR takes advantage of the best characteristics of the 300BLK by
integrating key components into one package, eliminating the need for two separate tax stamps.
While the rifle utilizes a 10.3” barrel, it is not classified as an SBR (Short-Barreled Rifle) because the suppressor is
permanently attached. The DDM4ISR 300’s sound suppressor is threaded and welded to the proprietary ISR Integrated
gas block, bringing the barrel length to 16.145”. While the rifle is at the 16” legal limit, the ISR’s integrated suppressor will
require an NFA tax stamp. Class III dealers only. All NFA rules apply.
300BLK
(7.62x35mm)
The integral suppressor sits halfway inside the MFR™ rail. The design allows extra volume inside the suppressor
to maximize suppression while the extended design brings the overall barrel length past the federally-mandated
16”, preventing the owner from having to register the ISR as a regulated short barrel rifle (SBR).
The ISR suppressor’s one-piece core easily removes with the help of the inclluded tool to facilitate end-user
cleaning and maintenance.
When shooting subsonic ammunition, the integrallysuppressed barrel of the ISR produces overall sound
pressure levels below even those of suppressed
9mm submachineguns, delivering an impressive
220gr payload downrange. With no adjustments to
the rifle, the user can switch to high performance
supersonic ammunition for extended range shooting.
The 300 AAC BLACKOUT is a .30 caliber
cartridges developed for use in AR15-style
firearms. Unlike its wildcat predecessors, the
300 BLK is a SAAMI-standard cartridge. It
provides 7.62x39mm or better ballistics from
the AR platform with only a barrel change. It
uses standard 5.56 bolts and magazines.
Ammunition is available in both subsonic and
supersonic loads.
SPECIFICATIONS // DDM4ISR
This firearm is a regulated item by the National Firearms Act (NFA). Please check with your local and state
municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply
with all NFA rules and applicable laws.
ISR // MFG# 02-103-18026
(CLASS III DEALER ORDERS ONLY)
BARREL LENGTH:
BARREL MATERIAL:
BARREL TYPE:
BARREL PROFILE:
RIFLING TWIST:
GAS SYSTEM LENGTH:
MUZZLE DEVICE:
OVERALL LENGTH:
WEIGHT (UNLOADED):
CALIBER:
RAIL SYSTEM:
10.3”
STRENGTH-TO-WEIGHT (S2W®)
1:8”
PISTOL LENGTH
INTEGRAL SUPPRESSOR
31.25”
7.56 LBS
300BLK (7.62X35MM)
MFR™ 12.0
AVAILABLE COLOR
BLACK
2015 33
UPPER RECEIVER
GROUPS V1,V3,V5
LEFT TO RIGHT:
DDM4V1
• 5.56 NATO (5.56x45mm)
• 1:7 in., 16-in. CHF Barrel
• Carbine Length Gas System
• DDM4 Rail™ 12.0 FSP
• M16 Bolt Carrier Group, HPT’d and MPI’d
• Daniel Defense Vertical Foregrip
• Daniel Defense A1.5® Fixed Rear Sight
• Available in M4 or Lightweight Profile
DDM4V3
• 5.56 NATO (5.56x45mm)
• Mid-length Gas System
• DDM4 Rail™ 9.0
• Daniel Defense A1.5® Fixed Rear Sight
• Available in Government Profile
DDM4V5
• 5.56 NATO (5.56x45mm)
• Available in GOV or Lightweight Profile
V1 URG M4 // MFG# 23-050-08176
V1 URG LW // MFG# 23-050-08226
V3 URG GOV // MFG# 23-108-09175
V5 URG GOV // MFG# 23-123-09138-047
V5 URG LW // MFG# 23-123-00140-047
2015 35
UPPER RECEIVER
GROUPS V7,V9,V11
MK18,M4A1,MK12
LEFT TO RIGHT:
LEFT TO RIGHT:
DDM4V7
DDMK18
• 5.56 NATO (5.56x45mm)
• Modular Float Rail 12.0
• 5.56 NATO (5.56x45mm)
• 1:7 in., 10.3-in. CHF Barrel
• Carbine-Length Gas System
• MK18 RISII FDE
• Available in Government Profile
• Requires Pistol or SBR-Registered Lower,
All NFA Rules Apply
DDM4V9
DDM4A1
• 5.56 NATO (5.56x45mm)
• 1:7 in., 16-in. & 18-in. CHF Barrel
• 5.56 NATO (5.56x45mm)
• 1:7 in., 14.5-in. CHF Barrel
• Carbine Length Gas System
• M4A1 RISII FDE
• Available in M4 Profile
DDM4V11
DDMK12
• 5.56 NATO (5.56x45mm)
• 1:7 in., 16 in.
• SLiM Rail™ 15.0
• 5.56 NATO (5.56x45mm)
• 1:7 in., 18-in. CHF Stainless Barrel
• Rifle Length Gas System
FDE
BLK
V7 URG GOV // MFG# 23-128-22010-047
V7 URG LW // MFG# 23-128-09416-047
V9 URG GOV // MFG# 23-145-18027-047
V9 URG LW // MFG# 23-145-19025-047
V9 URG S2W // MFG# 23-145-02196-047
V11 URG GOV // MFG# 23-151-02197-047
V11 URG LW // MFG# 23-151-02077-047
MK18 URG FDE // MFG# 23-004-08013-011
MK18 URG BLACK // MFG# 23-004-08013-006
M4A1 URG // MFG# 23-004-13150
MK12 URG // MFG# 23-142-10035-047
2015 37
RAIL SYSTEMS
OVERVIEW
Daniel Defense continues to be the industry
leader in the design and manufacture of
lighter, stronger rail systems. In support of the
Designated Marksman Rifle Program, Daniel
Defense established itself by supplying the
Army Marksmanship Unit with the M4 Rail™.
Our dedication to cutting edge technology,
manufacturing and quality control, has led
the way to winning the coveted US Special
Operations Command (SOCOM) Rail System
Contract and becoming the sole source
provider to the UK Ministry of Defense (MOD),
supplying rail systems for their SA80/L85. Our
designs, manufacturing, and commitment to
quality control continue to be cutting edge.
All Daniel Defense Rail Systems are built
to the 1913 Military Specification, and the
Mil-Spec Type III Hard Coat Anodized Finish
creates a stronger, more durable surface. The
majority of our rails feature a free-floating
design, allowing the barrel’s harmonics to be
unaffected by accessories mounted to the rail
system. Our patented attachment technology
and state of the art manufacturing all lead to
top of the line rail platforms.
QUALITY CONTROL
Just like with our industry-leading DDM4
rifles, our rail systems undergo unrivaled
quality control procedures. In order to offer
our end users a lifetime guarantee, extensive
thought and rigorous testing is standard
with every step. Highly-skilled personnel
are equipped with the latest technology in
measuring and test equipment, such as the
CMM (Coordinate Measuring Machine), Laser
Measuring Equipment, and Vision Systems to
ensure every component meets or exceeds
specifications. Driven to increase customer
satisfaction, Daniel Defense is adopting the
ISO-9001 Quality Management Standard—
the standard recognized internationally for the
quality management of business.
2015 39
RAIL SYSTEMS
AR15 LITE RAIL III
™
The AR15 Lite Rail III™ is the third generation of Lite Rail from Daniel Defense.
The improved design enhances the rail’s structural integrity, improves functionality,
ergonomics, aesthetics and ease of installation to the weapon system without
compromising its best-known attributes, one of which being the lightest rail system
on the market. Enhanced features include a machined one-piece design, replacing
the previous two-piece welded design of the first generation Lite Rail, and uses our
patented Bolt-Up System. The AR15 Lite Rail III™ requires only 4 bolts instead of 6
and has tabs that aid in alignment to the upper receiver during installation. Front and
Rear Sling Swivel Attachment Points are integrated into both the left and right side rails
and are designed to limit the swivel’s rotation, preventing twists and tangles in slings.
• Lightweight Free-Floating Barrel Design
• Uninterrupted Upper Rail Platform
• Aircraft Grade Aluminum
• Hardened Steel Barrel Nut
• Mil-Spec Type III Hard Coat Anodized Finish
• Mil-Spec Fasteners
• Mil-Spec 1913 Picatinny Rails
The AR-15 Lite Rail III™ is has an
uninterrupted upper rail platform that is
achieved by the patented “Bolt-Up System”.
This allows the operator to mount an optic on
the top rail wherever needed.
The AR-15 Lite Rail III™ is a free-float rail
system. This means the barrel’s harmonics
are not affected by outside forces. All the
weight of the accessories are supported by
the rail system.
AR15 LITE RAIL III™ 7.0 // MFG# 01-002-00141
AR15 LITE RAIL III™ 12.0 FSP // MFG# 01-002-22175
AR15 LITE RAIL III™ 7.0
AR15 LITE RAIL III™ 12.0 FSP
Perfect for carbine length gas systems,
giving you enough room and versatility for
the essentials.
For mid-length gas systems, this rail allows
the user to mount a rail flush to the front
sight post, while leaving plenty of room for
accessory mounting.
At just over 12”, the AR15 Lite Rail III™ is
perfect for Mid-length gas systems with low
profile gas blocks.
Perfect for use in conjunction with carbine
gas system and front site base. Provides
extra rail real estate beyond the front site.
For those that can’t get enough rail real
estate, the 15” version accommodates
low profile gas blocks on rifle, mid-length
or carbine gas systems.
• Weight: 8.3 oz.
• Length: 7.23”
• Width: 1.90”
• Weight: 10.3 oz.
• Length: 9.22”
• Width: 1.90”
• Length: 12.43”
• Width: 1.90”
• Length: 12.43”
• Width: 1.90”
• Length: 15.20”
• Width: 1.90”
2015 41
RAIL SYSTEMS
OMEGA RAIL
®
The Daniel Defense Omega Rail® delivers a much needed product specifically engineered to satisfy the intense demands of the
military and law enforcement communities. The Omega Rail® is the only free-float rail system that accommodates individual operator
installations requiring ZERO modification to the host weapon! The Omega Rail® features integrated limited rotation QD sling swivel
mounts and has an uninterrupted upper rail platform. All Omega Rail® fasteners are built to Mil-Specs for finish and quality.
The Omega Rail is designed to work with all commercially available M4 or AR15 gas systems. Its exceptional strength-to-weight ratio
makes it the perfect selection for your M4 or AR15-style weapon. All Daniel Defense rail systems are built to the 1913 Mil-Spec and
are 100% quality assurance checked for conformity to the specification.
•Lightweight Free-Floating Barrel Design
•User Installed With No Special Tools
•Zero Modification To Host Weapon
•Uninterrupted Upper Rail Platform
•Oval Shape To Feel Like Traditional Handguard
•Integral QD Sling Swivel Mounts with Limited Rotation Feature
•Aircraft Grade Aluminum
•Mil-Spec Type III Hard Coat Anodized Finish
•Mil-Spec Fasteners
•Mil-Spec 1913 Picatinny Rails
OMEGA™ 7.0 CARBINE // MFG# 01-005-10001
OMEGA™ 9.0 MID // MFG# 01-005-10002
OMEGA™ 12.0 RIFLE // MFG# 01-005-10003
OMEGA RAIL® 7.0
OMEGA RAIL® 9.0
OMEGA RAIL® 12.0
Designed to work with standard Carbine Gas
System weapons.
Designed to work with standard Mid-length
gas systems or over a low profile gas block on
a carbine length gas system.
Designed to work with rifle length gas
systems or over a low profile gas block on a
Carbine or Mid-length gas system rifle.
• Weight: 7.6 oz.
• Length: 6.875”
• Width: 1.9”
• Weight: 9.8 oz.
• Length: 8.875”
• Width: 1.9”
• Length: 12.4”
• Width: 1.9”
Photo Courtesy US Department of Defense
2015 43
RAIL SYSTEMS
SLiM RAIL
™
The SLiM Rail™ (Slim, Lightweight, Modular) from Daniel Defense utilizes the KeyMod accessory
attachment system for incredible weight savings as well as superior cooling, ergonomics, and modularity
while maintaining the strength and durability expected from Daniel Defense. KeyMod is a recoil-resistant,
two-part, direct-attachment method for accessories that offers outstanding “return-to-zero” when
accessories are removed and reinstalled. The SLiM Rail™ features the battle-proven “Bolt-Up System”
which provides modern flat-top upper receivers with a free-floating, continuous, uninterrupted upper
rail platform and allows for simplified alignment to the host weapon upper receiver. Ambidextrous sling
swivel attachment points are integrated into both the left and right side rails at 1 and 11 o’clock. The SLiM
Rail™ can be used with a low-profile gas block on pistol, carbine, or mid-length gas systems.
• Lightweight Free-Floating Barrel Design
• Steel Barrel Nut
• Uninterrupted Mil-Spec 1913 Picatinny Upper Rail
• KeyMod attachment at 3, 6, & 9 o’clock positions
• Ambidextrous Sling Swivel Attachment Points
at 1 and 11 o’clock
• Patented Bolt-Up mounting System
• Aircraft Grade 6061-T6 Aluminum
• Mil-Spec type III Hard Coat Anodized Finish
• Mil-Spec Fasteners
SLiM™ 9.0 // MFG# 01-147-81662
SLiM™ 12.0 // MFG# 01-147-02038
SLiM™ 15.0 // MFG# 01-147-22026
SLiM RAIL™ 9.0
SLiM RAIL™ 12.0
SLiM RAIL™ 15.0
Designed to work with standard mid-length
gas system weapons or over a low profile gas
block on carbine length gas system.
Designed to work with standard rifle length
a mid- or carbine-length gas system.
Designed to work with standard rifle length
a rifle , mid, or carbine length gas system.
• Weight- 8.6 oz
• Length- 9.22”
• Width- 1.74”
• Weight- 9.9 oz
• Length- 12.43”
• Width- 1.74”
• Weight- 11.2 oz
• Length- 15.20”
• Width- 1.74”
2015 45
NEED TO KNOW
DD CHF BARRELS
Cold Hammer Forging (CHF) of barrels has been known for
decades to produce the most accurate, longest lasting rifle barrels
obtainable. The Cold Hammer Forging of barrels is accomplished
through intense hydraulic pressure applied at opposing angles by
carbide steel hammers. During the hammering process, a mandrel
is inserted into the bore while the carbide steel hammers shape
the barrel around the mandrel creating the chamber, the lands, and
the grooves. In addition to the aforementioned benefits, the Cold
Hammer Forging process changes the micro- structure of the steel
making it stronger, with a defect-free bore and the most consistent
chamber possible.
What started for Daniel Defense as a barrel project has quickly
proven to be an industry changer. Unable to locate a supplier of
Cold Hammer Forged barrels for our own rifles, we purchased a
Hammer Forge capable of supporting our needs. In early 2009,
after months of research and development and labor-intensive
testing, Daniel Defense introduced one of the only commercially
available 5.56 Cold Hammer Forge Barrels in the United States.
After fine-tuning the manufacturing process and proving these
barrels to be some of the most accurate and durable currently
available, Daniel Defense introduced an entire line of Cold Hammer
Forged Barrels.
All Daniel Defense barrels are made from start to finish in our
state-of-the-art facility located in Black Creek, Georgia. With
the capacity to manufacture 8000 barrels each and every
month, quality control standards have never been more crucial.
Sophisticated equipment such as the Hommel Optic, Micro-VU
and Bore Scope are used routinely for complex measurements,
ensuring each barrel is to spec.
Daniel Defense barrels are finished with either a heavy phosphate
exterior coating with chrome lining, salt bath nitride treated, or
in the case of certain stainless steel barrels, a bead-blasted,
chemically passivated finish.
BARREL PROFILES
1. M4
2. Government
3. Lightweight
4. Strength 2 Weight (S2W®)
This is the core element within our Hammer Forge Machine. These four hydraulic
hammers are responsible for shaping our barrel blanks around a carbide mandrel
which creates the lands and grooves of the bore as well as the chamber. Up to 8,000
barrels pass through this machine each month. Cold Hammer Forging (CHF) produces
barrels with a surface finish 11.5X smoother than traditional “cut” barrels as shown in
the below comparison.
90X
GAS SYSTEM LENGTH
1. Pistol
2. Carbine
3. Mid-length
CHF
90X
CUT
Profilometer-measured
Average Roughness
Profilometer-measured
Surface Finish
Cold Hammer Forged Barrel vs. Cut Barrel
chamber and bore comparison photo
Microview of CHF vs.
Cut Surface Finish
2015 47
CMV (Chrome Moly Vanadium), CHF (Cold Hammer Forged),
Chrome Lined, Phosphate Finish. Unless noted in description.
DD CHF
SBR BARRELS
CMV (Chrome Moly Vanadium), CHF (Cold Hammer Forged),
Chrome Lined, Phosphate Finish. Unless noted in description.
10.3” S2W® PROFILE, PISTOL GAS
• 300BLK, 1:8” Twist, Salt Bath Nitride Finish
STRIPPED // MFG# 36-116-00253-107
14.5” M4 PROFILE, CARBINE GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-075-18024-018
10.3” GOVERNMENT PROFILE, CARBINE GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-077-16176-018
14.5” LIGHTWEIGHT PROFILE, CARBINE GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-078-19022-018
DD CHF
16-18” BARRELS
16” M4 PROFILE, CARBINE GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED //MFG# 07-075-08174-018
16” S2W® PROFILE, CARBINE GAS
• 300BLK, 1:8” Twist, Salt Bath Nitride Finish
STRIPPED // MFG# 36-116-22022-107
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-077-16522-018
14.5” LIGHTWEIGHT PROFILE, MID-LENGTH GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-078-08072-018
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-077-17022-018
14.5” GOVERNMENT PROFILE, MID-LENGTH GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-077-19125-018
16” LIGHTWEIGHT PROFILE, CARBINE GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-078-08224-018
16” GOVERNMENT PROFILE, MID-LENGTH GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-077-09173-018
16” LIGHTWEIGHT PROFILE, MID-LENGTH GAS
• 5.56x45 NATO, 1:7” Twist
STRIPPED // MFG# 07-078-09136-018
16” S2W® PROFILE, MID-LENGTH GAS
• 6.8 SPC II, 1:11” Twist, Salt Bath Nitride Finish
STRIPPED // MFG# 29-116-09428-107
• 5.56x45 NATO, 1:7” Twist, Salt Bath Nitride Finish
STRIPPED // MFG# 07-116-22172-107
• 6.8 SPCII, 1:11” Twist, Salt Bath Nitride Finish
STRIPPED // MFG# 29-116-20022-107
2015 49
LIGHTER,
STRONGER,
BETTER...
®
2015 51
No Muzzle Device
ACCESSORIES
MUZZLE DEVICES
A2 Flash Hider
Daniel Defense offers its own line of premium muzzle devices that have been designed, tested, and manufactured to meet the expectations of the most
demanding consumers. The Daniel Defense Flash Suppressor and Superior Suppression Device, in a series of tests, showed improved flash suppression
over the traditional A2 Birdcage. For the shooter driven by accuracy, the new Daniel Defense Muzzle Climb Mitigator Gen II redirects propellant gasses
through calibrated ports, countering both recoil and muzzle climb. Less recoil and muzzle climb results in quicker, more precise follow-up shots and
reduced fatigue. In keeping with the highest standard of quality, Daniel Defense muzzle devices are constructed from the highest grade 17-4 PH stainless
steel and salt bath nitride finished to reduce corrosion and wear.
DD Standard Flash Hider
Daniel Defense Muzzle Devices are available in 1/2-28 (5.56mm) or 5/8-24 (6.8 SPCII, 300 AAC, 7.62mm)TPI and come in standard or extended lengths.
The standard length flash suppressor, ½ x 28 TPI, is compatible with certain aftermarket sound suppressors.
DD Superior Flash Hider
Top View
Flash Suppressor:
• Length: 1.875”
Top View
FS Extended:
• Length: 2.250”
Top View
Top View
Superior Suppression Device:
• Length: 1.875”
SSD Extended:
• Length: 2.250”
Side View
Muzzle Climb Mitigator Gen II:
• Length: 1.875”
Top View
MCM Gen II Extended:
• Length: 2.250”
FLASH SUPPRESSOR 1/2-28 // MFG# 06-048-08061
FLASH SUPPRESSOR EXT 1/2-28 // MFG# 06-048-08123
FLASH SUPPRESSOR, 30 CAL 5/8-24 // MFG# 06-048-05163
FLASH SUPPRESSOR EXT, 30 CAL 5/8-24 // MFG# 06-048-06013
SUPERIOR SUPPRESSION DEVICE 1/2-28 // MFG# 06-048-04074
SUPERIOR SUPPRESSION DEVICE EXT 1/2-28 // MFG# 06-048-04165
SUPERIOR SUPPRESSION DEVICE, 30 CAL 5/8-24 // MFG# 06-048-06111
SUPERIOR SUPPRESSION DEVICE EXT, 30 CAL 5/8-24 // MFG# 06-048-06163
•
MUZZLE CLIMB MITIGATOR GEN II 1/2-28 // MFG# 06-049-16140
MUZZLE CLIMB MITIGATOR GEN II EXT 1/2-28 // MFG# 06-049-02042
MUZZLE CLIMB MITIGATOR GEN II, 30 CAL 5/8-24 // MFG# 06-049-02082
MUZZLE CLIMB MITIGATOR GENII EXT, 30 CAL 5/8-24 // MFG# 06-049-02242
2015 53
2015 55
ACCESSORIES
FURNITURE
A4 UPPER RECEIVER
The Daniel Defense A4 Upper Receiver is a Mil-Spec Upper Receiver and is equipped with an
ejection port cover, forward assist, and machined M4 feed ramps for more reliable feeding.
Available with standard or large takedown pin holes.
A4 UPPER RECEIVER // MFG# 04-013-09003
BIG HOLE UPPER RECEIVER, W/FEED RAMPS // MFG# 04-012-09001
DD ENHANCED VERT. FOREGRIP
DD ENHANCED PISTOL GRIP
DD ENHANCED BUTTSTOCK
Daniel Defense Enhanced Vertical Grip
includes soft touch rubber overmolding for
enhanced grip, wet or dry. Dual O-Ring,
water tight storage compartment is capable
of storing small parts. Extremely lightweight
and utilizes a simple, yet durable mounting
method.
Daniel Defense’s Enhanced Pistol Grip
features a more ergonomic wrist angle and
integrated, oversized trigger guard for strength
and comfort. Soft touch rubber overmolding
gives the shooter a reliable hold in all weather
conditions.
The Daniel Defense Enhanced Buttstock is constructed of a proprietary blend
of glass infused polymers and finished off with soft touch rubber overmolding
in strategic points. It’s precision formed for mil-spec receiver extensions,
minimizing forward or lateral play. This eliminates the need for a tensioning
device or friction lock. All of which results in a durable buttstock that
provides a comfortable, repeatable cheek weld and unprecedented control of
the firearm. The buttstock can be run with the included convex or concave
buttpads or without to accommodate the operator’s gear. Limited rotation QD
swivel attachment points are integrated on both sides for ambidextrous sling
attachment.
Available in Black, Mil Spec+™, Daniel
Defense Tornado™.
Available in Black, Mil Spec+™, Daniel
Defense Tornado™.
Available in Black, Mil Spec+™, Daniel Defense Tornado™.
ACCESSORIES
AR PARTS
Daniel Defense is proud to offer the finest AR parts in the industry. Whether you’re repairing an older gun, building
a brand new one, or even upgrading a competitor’s gun, visit danieldefense.com/components-parts.html for an
up-to-date listing of availability.
LOWER PARTS KIT
The Daniel Defense Enhanced Lower Parts Kit includes all of the same internal components used in the acclaimed Daniel
MFG# 05-013-21007
Defense M4 carbine. Includes components necessary to finish your stripped lower. Includes A2 pistol grip and MOE®
Trigger Guard.
BOLT CARRIER GROUP
The 5.56 Bolt Carrier Group includes a complete bolt, firing pin, carrier and gas key. The group comes fully assembled
MFG# 04-013-02146
with the gas key properly staked. All Daniel Defense bolt carrier groups pass a thorough Magnetic Particle Inspection
(MP) test before shipping. The carrier is chrome lined and the entire assembly features a heavy Mill-Spec phosphate
coating for superior corrosion resistance.
Quickly and easily upgrade the control,
comfort, and modularity of your AR-15 with
our new enhanced rifle furniture.
The Daniel Defense Omega Rail 7.0 (shown)
is the perfect drop-in replacement for plastic
handguards on a carbine gas system. See
page 38.
BOLT ASSEMBLY
Daniel Defense’s complete 5.56 bolt assembly. MPI tested and finished with a heavy phosphate coating.
MFG# 04-013-09302
CHARGING HANDLE ASSBLY.
Precision CNC machined from 7075 Aluminum the Daniel Defense charging handle comes complete with latch and is
MFG# 04-013-09070
finished with a Mill-Spec type III hard coat anodization.
DD ENH. FURNITURE COMBO, BLACK // 28-102-06145-006
DD ENH. FURNITURE COMBO, MIL SPEC+ // 28-102-06145-011
DD ENH. FURNITURE COMBO, TORNADO // 28-102-06145-012
DD ENH. BUTTSTOCK, BLACK // 21-091-04179-006
DD ENH. BUTTSTOCK, MIL SPEC+ // 21-091-04179-011
DD ENH. BUTTSTOCK, TORNADO // 21-091-04179-012
GAS TUBE
Carbine Length AR15 Gas Tube. Includes roll pin
MFG# 04-013-01009
BUFFER TUBE
Carbine length Mil-Spec receiver extension. 6-position
MFG# 05-013-06115
BUFFER SPRING
Carbine Mill-Spec Action Spring
MFG# 15-024-21003
H BUFFER
The additional weight of the H-buffer slows the cycle of the standard carbine. Providing reduced recoil and
MFG# 05-013-21004
greater feed reliability.
.750 LOW PRO FILE GAS BLOCK
Clamp Low Profile Gas Block
MFG# 25-079-05006
.625 LOW PRO FILE GAS BLOCK
Clamp Low Profile Gas Block
MFG# 25-079-04157
DD ENH. PISTOL GRIP, BLACK // 21-071-05177-006
DD ENH. PISTOL GRIP, MIL SPEC+ // 21-071-05177-011
DD ENH. PISTOL GRIP, TORNADO // 21-071-05177-012
DD ENH. VERT FOREGRIP, BLACK // 21-067-05028-006
DD ENH. VERT FOREGRIP, MIL SPEC+ // 21-067-05028-011
DD ENH. VERT FOREGRIP, TORNADO // 21-067-05028-012
2015 57
ACCESSORIES
ACCESSORIES
MOUNTS
SLING MOUNTS
PANELS, & SIGHTS
AIMPOINT® MICRO MOUNT
1 O’CLOCK OFFSET RAIL
OFFSET FLASHLIGHT MOUNT
RAIL MOUNT QD SWIVEL
ATTACHMENT
REAR RECEIVER QD SWIVEL
ATTACHMENT
Daniel Defense’s Micro Mount is designed to
work in conjunction with Aimpoint’s popular
Micro R-1, H-1, T-1 and T-2 optics. Offering
absolute or a lower 1/3rd co-witness with
your back-up iron sights, this mount is ideal
for shooters who are looking for the lightest
mount to accent their Aimpoint® Micro. Its
lightweight, essentials-only design offers a
snag-free, low-profile, reversible mounting
option for shooters that do not require a
quick attach/detach mounting solution. The
Aimpoint® Micro Mount features our Rock &
Lock® attachment method and secures to any
MIL-STD 1913 Picatinny rail. Machined from
6061 aircraft grade aluminum and Mil-Spec
hardcoat anodized.
The Daniel Defense 1 O’clock Offset Rail
is optimized for mounting miniature red
dot optics in the 1 o’clock (right-hand) or
11 o’clock (left-hand) positions for quick,
non-magnified transitions when employing
magnified primary optics on AR-type rifles
with MIL-STD 1913 rails. The geometry
allows for zero cheekweld shift during
the transition, which facilitates very fast
transitions between magnified and nonmagnified optics. It can also be used for a
variety of lights and accessories. By flipping
the part upside-down, one can mount a light
in a good position for use with a vertical
foregrip. The 1 O’clock Offset Rail features
our Rock & Lock® attachment method and
secures to any MIL-STD 1913 Picatinny rail.
Machined from 6061 aircraft grade aluminum
and Mil-Spec hardcoat anodized.
The Daniel Defense Offset Flashlight Mount is
designed for use in conjunction with a vertical
foregrip. Innovative engineering ensures that
the user’s thumb has quick and easy access to
the rear button of a mounted flashlight without
compromising any control of the weapon. This
set up eliminates accidental light discharges
and is an essential part of a tactical
professional’s weapon set-up. The new onepiece design increases structural integrity,
while our patented Rock & Lock® technology
makes for easier installation and eliminates the
need for multiple attachment points.
The Daniel Defense Rail Mount QD Swivel
Attachment Point is designed to mount
the swivel anywhere along the rail system.
Designed and machined to limit the rotation
of the swivel to prevent the operator’s sling
from becoming tangled. The new one-piece
design increases structural integrity, while our
patented Rock & Lock® technology makes for
easier installation and eliminates the need for
a second attachment piece.
The Daniel Defense QD Swivel Attachment
Point provides an ambidextrous attachment
of the popular Heavy Duty Push Button QD
Sling Swivel. This steel-constructed, swivel
attachment mounts to the rear of the lower
receiver with a collapsible stock receiver
extension. The swivel’s rotation is limited by
the buffer tube, preventing tangles.
EZ CARBINE SLING MOUNT
The Daniel Defense EZ Carbine Sling Mount is
the perfect sling mount for Law Enforcement
Agencies and Military Units who must comply
with restrictions to modifications of issued
weapons. The new one-piece design slides
easily over the buffer tube for attachment to
the receiver extension. The swivel’s rotation
is limited to ensure the sling does not become
tangled. Lightweight, the EZ Carbine Sling
Mount weighs less than an ounce and is more
aesthetically pleasing than before.
RAIL MOUNT QD W/SWIVEL // MFG# 03-021-30029
KEYMOD MOUNT QD // MFG# 03-018-07231
REC. END PLATE W/QD SWIVEL // MFG# 03-018-30026
EZ CAR QD W/SWIVEL // MFG# 03-019-05026
HD QD SLING SWIVEL // MFG# 13-018-00006
The perfect Rail-Mount Fixed Front Sight.
The lightweight, streamlined design makes
it unobtrusive and snag-free. The one-piece
design makes it easy to install on any MILSTD-1913 rail and it secures with a slotted
fastener threaded into a self-locking stainless
steel thread insert. Special attention was paid
to facilitate the use of compact weapon-lights
forward of the sight, such as the X300 and
TLR-1. The concave radius on either side of the
sight is a great place to rest your thumb for easy,
ambidextrous activation of the light. Machined
from 6061-T6 aluminum and Mil-Spec Hard
Coat Anodized, our Rail-Mount Fixed Front
Sight is both lightweight and durable and is the
perfect complement to our A1.5® Fixed Rear
Sight. The rear surface features anti-glare
serations.
A1.5 ® FIXED REAR SIGHT
LADDERS & PANELS
AIMPOINT MICRO MOUNT (W/LOWER 1/3 ADAPTOR), PICATINNY // MFG# 03-045-18025
1 O’CLOCK OFFSET MOUNT, PICATINNY // MFG# 03-029-13017
1 O’CLOCK OFFSET MOUNT, KEYMOD // MFG# 03-029-07131
OFFSET FLASHLIGHT MOUNT, PICATINNY // MFG# 03-020-16514
OFFSET FLASHLIGHT MOUNT, KEYMOD // MFG# 03-020-07128
FIXED FRONT SIGHT
Daniel Defense Rail Panel Covers are made from Santoprene,
capable of withstanding temperatures up to 300 degrees.
The panels, featuring Daniel Defense’s signature pattern,
provide a rubbery grip surface that protect your rail system
and your hands. Available in black and come three to a pack.
LADDERS BLACK // MFG# 21-010-09324-006
LADDERS FDE // MFG# 21-010-09324-011
PICATINNY RAIL PANELS // MFG# 21-010-03038-006
KEYMOD RAIL PANELS // MFG# 21-011-21098-006
The A1.5® Fixed Rear Sight’s lightweight,
streamlined design makes it the optimum fixed
iron sight for shooter’s using today’s most
popular optics. It’s engineered not to impede
use of the charging handle on M4-type rifles
and installs easily on any flattop upper receiver
using our patented Rock & Lock® attachment
method.
A1.5 FIXED REAR SITE // MFG# 19-064-11002
FIXED FRONT SIGHT // MFG# 19-017-04013
FIXED FRONT/REAR SIGHT COMBO // MFG# 19-088-09116
2015 59
ACCESSORIES
APPAREL
& MISC.
Check our website for up-to-date listings!
DD ADJUSTABLE FIT HAT - OLIVE
• Velcro Back Closure
• No crown button
• US Flag
DDE TRUE AMERICAN RIFLE
T-SHIRT, CHARCOAL
Daniel Defense T-Shirt takes on a retro feel
while featuring the iconic DDM4 v1 as part of
this True American Rifle design. This super
silky fabric if lightweight yet durable enough to
endure day-to-day wear and tear.
• Color: Charcoal
• Sizes: S, M, L, XL, XXL, XXL
• 65% Polyester / 35% Cotton
• Tear-away Label
• 3X, 4X, 5X (Gildan, 100% Cotton)
DD LOW PROFILE ADJUSTABLE
FIT HAT - GRAY
Daniel Defense Gray Hat is perfect for gun
enthusiasts determined to look and feel great
on the range, at work or around town. 100%
Cotton Ripstop offers ultimate comfort that
cannot be matched. This modern looking
head wear features a Velcro back closure and
no button on the crown allowing you to wear
your “ears” comfortably.
DD TRUE AMERICAN RIFLE
WOMEN’S T-SHIRT, PINK
For the confident woman who happens to be
a firearms aficionado, Daniel Defense offers a
super silky, Pink Poly/Cotton Tee. Lightweight,
yet durable, this top allows you to look good
and feel good while staying cool on the range
or around town. This 60/40 blend also sports
the Daniel Defense True American Rifle design
across the front.
• Color: Pink
• Sizes: S, M, L, XL, 2XL
• 60% Cotton/40% Polyester
DD LICENSE PLATE T-SHIRT,
ESPRESSO
Daniel Defense T-shirt features a custom
license plate image with our “Double D”,
tagline, and location on an extremely soft
Espresso Poly/Cotton Blend.
• Color: Espresso
• Sizes: S, M, L, XL, XXL, 3XL
• 65% Polyester / 35% Cotton
• Tear-away label
DD FLAG PATCHES
DD FOLDING KNIFE
Velcro-backed woven patches,
measuring approimately 5” x 3”.
Available in “Desert Tan” or “OD Green”.
Never leave home without one. We partnered
with Kershaw to pair our own blade design
with a proven Ken Onion mechanism.
LOW PROFILE ADJUSTABLE FIT HAT, GRAY // 14-044-14174
ADJUSTABLE FIT HAT, OLIVE // 14-044-00056-013
• Daniel Defense Logo on the front
• Lighter, Stronger, Better… on the back
• Material: 100% Cotton Ripstop, Gray
• Black Sweatband & Underpeak
• Back Arch: Woven America Flag
• Velcro Closure
TRUE AMERICAN RIFLE T-SHIRT, CHARCOAL (S-5XL) // 14-044-15021 (001-005 & 071-073)
TRUE AMERICAN RIFLE T-SHIRT, PINK (S-XL) // 14-043-08171 (001-005) LICENSE PLATE
T-SHIRT, ESPRESSO (S-2XL) // 14-043-15119 (001-005 & 071)
DD RETRO TIN SIGN
Add a touch of class to any garage or shop
with this laquered metal sign. It measures
approximately 11 5/8” wide by 17.5” tall.
Pictured:
DD TIN SIGN // 13-088-02234
DD FOLDING KNIFE // 13-113-09117-006
© Daniel Defense Inc. All Rights Reserved.
Daniel Defense hat features Velcro back
closure and no button on the crown to dig into
your head while wearing hearing protection.
Subdued in color and has a distressed look.
This hat also features a US Flag in the rear
opening.
Whether on the battlefield, at the range, in the back of a police cruiser, or protecting your
family in the middle of the night- details matter and the DDM4 is ready for duty. Each DDM4
model marks the culmination of over a decade of dedication by Daniel Defense to make the
best rifles in the world. We offer the highest-quality AR-15 style rifles in the configurations you
want most, and back them all with lifetime warranties and responsive customer service.
SEE THE WORLD’S BEST
RIFLES, RAIL SYSTEMS,
PARTS & ACCESSORIES AT:
AMERICAN FLAG PATCH, DESERT TAN // 14-088-06173-009
AMERICAN FLAG PATCH, OD GREEN // 14-088-06173-007
.COM

DDM4v11 - Daniel Defense

Transcription

Similar documents

Rail PDF

view printable hirail catenary bucket truck brochure

SPEcificAtionS

trx-308 battlerail™ instruction manual

Wimbo Park - plan

RMFL - Blue Force Gear

centerfire firearms

Bartop Brochure

Tivativa

Conductor Rail Support Profile for AS/RS and Transfer Cars