PUMPS foR CoNSTRUCTIoN

G O R M A N - R U P P
P U M P S
PUMPS FOR CONSTRUCTION
PRIMING-ASSISTED
GRpumps.com
FO R
T H E
J OB
P R I M I N G - A S S I S T E D
P U M P S
GORMAN-RUPP SETS A WHOLE NEW STANDARD IN
PRIMING-ASSISTED PERFORMANCE
Gorman-Rupp, the world’s leading manufacturer
of pumps, has revolutionized the construction
pumping industry. Gorman-Rupp now offers the
biggest and broadest
range of primingassisted (dry prime)
pumps.
GORMAN-RUPP OFFERS
THE BROADEST RANGE OF
PRIMING-ASSISTED PUMPS
With sizes from 3" to 30", heads up to 475 ft., flows
up to 40,000 GPM and 6" solids-handling capability,
Gorman-Rupp’s extensive line of hard-working, dependable
pumps will tackle everything, including clear liquids, tough
solids, and slurry applications.*
You can choose the Prime Aire® venturi priming system
or the Redi-Prime® diaphragm priming system. Both offer
auto­matic priming and repriming.
For sewage bypass operations, construction site dewatering
or other applications where intermittent flow can be a
problem, these dependable, versatile
performers help contractors move large
volumes of water rapidly, even when
sticks, stones, and debris would
normally present a problem.
All of Gorman-Rupp’s priming-assisted
(dry prime) pumps are designed and
engineered for the most rugged
and demanding construction
applications and are backed
by an industryleading two year
warranty.
*For larger flows, contact the factory. Additional pump models
are available up to 30" in size and up to 40,000 GPM.
Available in pedestal and SAE pump ends
for connection to customer driver.
P R I M I N G - A S S I S T E D
P U M P S
PRIME AIRE® PUMPS FEATURE GORMAN-RUPP’S
UNIQUE PRIMING SYSTEM
THIS SYSTEM USES a venturi and a compressor, which eliminates the leaks associated with traditional
vacuum-assisted pumps. This unique system not only reduces environmental concerns on sewage bypass operations
and other environmentally hazardous liquids, but it also enables the pumps to operate under flooded suction
conditions without leaking. The positive priming of the Prime Aire® is well suited for applications involving long suction lines, intermittent flows
or large volumes of air in the liquid being pumped.
DRY RUN CAPABILITY is designed into the Prime Aire® system.
An oversized, oil-lubricated mechanical seal allows the pump to run dry
continuously without damage. For positive, reliable priming time after
time, Gorman-Rupp Prime Aire®
pumps are the ones you can count on.
DUAL-SUCTION SIDE
CAPABILITY, on model
PA6C,
features a removable coverplate and
adjustable/ replaceable wearplate.
COMPRESSOR OVER PUMP
Several popular models are
available in a “Compressor-OverPump” arrangement. This innovative
configuration option offers a selfcontained, compact, flexible design
while allowing ease of operation and
servicing when needed.
SOLIDS HANDLING IMPELLER
Many Prime Aire® pumps feature rugged
open-type, two-vane ductile iron impellers
that are specifically designed to handle solids
and debris up to 4" (102 mm) in diameter. This
means fewer clogs and more productivity on
tough jobs.
ABRASIVE HANDLING SEAL
Prime Aire® pumps are equipped with
oversized, mechanical, oil-lubricated, double-floating, self-aligning
seals with silicon carbide rotating and stationary faces that are
designed to take the wear and tear of pumping solids, slurries and
other abrasives.
STANDARD AUTO-START CONTROLS
Auto-Start control starts and stops the
pump in response to a liquid level. The
pump starts only when there is water
to pump and turns itself off when the
water reaches the desired level. There
is never any need to waste fuel and
add to costly engine overhauls.
P R I M E
PSI
65
FT
Curves are based on a specific gravity of 1.0
PA4A60
PA6A60
PA6C60
PA6F60
PA8B60
PA10A60
PA12A60
PA14A60
90
200
60
80
55
50
180
70
160
60
140
45
®
TRASH PUMP PERFORMANCE
TOTAL HEAD
M
A I R E
40
120
50
35
30
100
40
25
80
30
20
60
15
20
40
10
10
PSI
FT
325
750
300
700
250
120
100
75
65
80
55
60
45
50
35
40
30
30
PA3A60
PA4B60
PA4C60
PA4D60
PA6B60
PA6E60
PA8C60
650
600
550
160
225
140
200
400
350
125
80
100
250
200
150
PA4A60
PA4B60
High Head
450
400
28
24
350
20
300
250
16
225
175
200
14
0
12
X 10
0
X 10
LITERS
PER SECOND
150
0
U.S.GALLONS
PER MINUTE
125
0
8
50
0
10
25
100
100
20
6
50
75
75
50
40
300
4
60
450
150
25
100
500
175
2
120
500
180
275
Curves are based on a specific gravity of 1.0
32
200
C-2-05
HIGH HEAD PUMP PERFORMANCE
TOTAL HEAD
M
220
25
X 10
20
0
PER SECOND
5
X 100
LITRES
15
0
10
0
U.S. GALLONS
PER MINUTE
10
0
0
20
20
5
Model
PA3A60
High Head
PA4C60
High Head
PA4D60
High Head
PA6A60
PA6F60
PA6C60
PA6B60
High Head
PA6E60
High Head
PA8B60
PA8C60
High Head
PA10A60
PA12A60
PA14A60
Size (maximum)
6" × 3"
4" × 4"
6" × 4"
6" × 4"
6" × 4"
6" × 6"
6" × 6"
6" × 6"
6" × 6"
10" × 6"
10" × 8"
10" × 8"
10" × 10" 12" × 12"
14" × 14"
150‑mm × 100‑mm × 150‑mm × 150‑mm × 150‑mm × 150‑mm × 150‑mm × 150‑mm × 150‑mm × 250‑mm × 250‑mm × 250‑mm × 250‑mm × 300‑mm × 350‑mm ×
75‑mm
100‑mm
100‑mm
100‑mm
100‑mm
150‑mm
150‑mm
150‑mm
150‑mm
150‑mm
200‑mm
200‑mm
250‑mm
300‑mm
350‑mm
Max Flow
820 GPM
51.9‑lps
930 GPM
58.7‑lps
850 GPM
53.6‑lps
1625 GPM
102.5‑lps
1500 GPM
94.6‑lps
1810 GPM
114.2‑lps
2700 GPM
114.2‑lps
2700 GPM
148.9‑lps
1900 GPM
119.9‑lps
4700 GPM
296.6‑lps
4450 GPM
281‑lps
5000 GPM
315.3‑lps
3900 GPM
234.0‑lps
6320 GPM
398.7‑lps
11950 GPM
753.9‑lps
Max Head
470'
143.3‑m
134'
40.8‑m
406'
123.7‑m
360'
109.7‑m
385'
117.3‑m
140'
42.7‑m
152'
42.7‑m
195'
44.5‑m
420'
128.0‑m
290'
88.4‑m
168'
51.2‑m
360'
109.7‑m
160'
48.8‑m
104'
31.7‑m
149'
45.4‑m
Max Solids
.5"
12.7‑m
3"
76.2‑mm
.41"
10.4‑mm
3"
76.2‑mm
.62"
15.7‑mm
3"
76.2‑mm
3"
76.2‑mm
3"
76.2‑mm
.69"
17.5‑mm
3.38"
85.9‑mm
3.38"
85.9‑mm
3.38"
85.9‑mm
3.25"
82.6‑mm
3"
76.2‑mm
4"
101.6‑mm
Gray Iron Housing
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
enclosed
open
enclosed
enclosed
enclosed
open
enclosed
open
enclosed
enclosed
enclosed
enclosed
open
enclosed
enclosed
Seal: Mechanical,
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Impeller Style
oil-lubricated, doublefloating, self-aligning
Flanges NPT
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Electric-Driven
✖
▲
✖
✖
✖
✖
✖
▲
✖
✖
✖
✖
▲
▲
▲
Control Panel:
NEMA 3R encl.
✖
●
✖
✖
✖
✖
✖
●
✖
✖
✖
✖
●
●
✖
Auto Start w⁄ Float
Controller
✖
▲
✖
✖
✖
✖
✖
▲
✖
✖
✖
✖
▲
▲
✖
Variable Frequency
Drive
✖
▲
✖
✖
✖
✖
✖
▲
✖
✖
✖
✖
▲
▲
✖
Engine-Driven
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
John Deere Diesel
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
✖
CAT Diesel
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
Deutz Diesel
✖
▲
▲
▲
✖
▲
▲
▲
✖
✖
✖
✖
✖
✖
✖
Auto Start w⁄ Float
Controller
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Auto Start:
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
Sound Attenuating
Enclosure
✖
❍
✖
✖
✖
✖
✖
❍
✖
✖
✖
✖
❍
❍
✖
(liquid-cooled)
(liquid-cooled)
(air-cooled)
EPS controller with
submersible transducer
Battery
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
High Speed Wheel Kit
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
DOT Trailer
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
Suction Strainer
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● Standard ❍ Optional ▲ Available ✖ Not Available
®
140
300
120
80
250
100
140
200
180
120
100
Max Flow
Max Head
Max Solids
13000
11000
12000
700
800
9000
10000
8000
500
600
6000
5000
7000
400
4000
RP6D
300
80
120
250
100
200
4250
4000
260
3750
240
3250
2750
3000
3500
220
200
180
2500
160
2250
2000
140
1750
120
1500
100
1000
1250
80
0
LITERS
PER SECOND
60
50
750
100
0
40
20
500
150
40
60
250
80
20
60
F or larger flows contact the factory. Additional pump models are available up to 30" in size and
up to 40,000 GPM.
RP10B60
RP12D60
RP14A60
RP16B60
6" × 3"
6" × 4"
8" × 6"
10" × 8"
12" × 10"
14" × 12"
14" × 14"
18" × 16"
150‑mm × 75‑mm
150‑mm × 100‑mm
250‑mm × 150‑mm
250‑mm × 200‑mm
305‑mm × 250‑mm
305‑mm × 305‑mm
356‑mm × 356‑mm
406‑mm × 406‑mm
1390 GPM
1700 GPM
4800 GPM
4900 GPM
6100 GPM
10,000 GPM
11,100 GPM
17,700 GPM
88.0‑lps
107.2‑lps
303.0‑lps
309.1‑lps
385.0‑lps
631.0‑lps
700.2‑lps
1117.0‑lps
475'
375'
350'
365'
250'
195'
145'
230'
145.0‑m
114.3‑m
107.0‑m
111.2‑m
76.2‑m
59.4‑m
44.2‑m
70.1‑m
.50"
3"
3.38"
3.38"
4.25"
3"
4"
4.25"
12.7‑mm
76.2‑mm
86.0‑mm
86.0‑mm
108.0‑mm
76.2‑mm
102.0‑mm
108.0‑mm
●
●
●
●
●
●
●
●
Impeller Style
enclosed
enclosed
enclosed
enclosed
enclosed
enclosed
enclosed
enclosed
Seal: Mechanical,
●
●
●
●
●
●
●
●
Gray Iron Housing
oil-lubricated, double-floating,
self-aligning
Flanges ASA
●
●
●
●
●
●
●
●
NPT Flange Kit
▲
▲
▲
▲
▲
▲
▲
▲
Metric Flange Kit
▲
▲
▲
▲
▲
▲
▲
▲
Electric-Driven
❍
❍
❍
❍
❍
❍
❍
❍
Control Panel: NEMA 3R encl.
▲
▲
▲
▲
▲
▲
▲
▲
Auto Start w⁄ Float
Controller
▲
▲
▲
▲
▲
▲
▲
▲
Variable Frequency Drive
▲
▲
▲
▲
▲
▲
▲
▲
Engine-Driven
❍
❍
❍
❍
❍
❍
❍
❍
John Deere Diesel
▲
▲
▲
▲
▲
▲
▲
▲
(liquid-cooled)
Deutz Diesel (air-cooled)
▲
▲
▲
▲
▲
▲
▲
▲
Auto Start w⁄ Float
Controller
●
●
●
●
●
●
●
●
Battery
▲
▲
▲
▲
▲
▲
▲
▲
High Speed Wheel Kit
▲
▲
▲
▲
▲
▲
▲
▲
Suction Strainer
●
●
●
●
●
●
●
●
● Standard ❍ Optional ▲ Available ✖ Not Available
* RP4G60, RP4K60, RP4K60 also available **RP6B60, RP6C60, RP6D60 also available ***RP8C60 also available
S P E C I F I C A T I O N S
Size (Maximum)
RP8A60***
RP4J
140
U.S.GALLONS
PER MINUTE
RP6A60**
RP3C
450
400
350
Dry Run capability
RP4D60*
Curves are based on a specific gravity of 1.0
FT
160
40
RP3C60
RP14A
HIGH HEAD PERFORMANCE
TOTAL HEAD
20
Model
0
LITERS
PER SECOND
300
U.S.GALLONS
PER MINUTE
3000
50
PSI
RP12D
RP6B
RP16B
2000
100
0
40
20
M
RP10B
RP6A
P U M P
Models are engineered with highly
efficient, enclosed impellers, with some
models using double volutes increasing
the performance far beyond many
competitor’s pumps. The Cycloseal®
design, with its impeller backvanes
and unique deflector vanes, assists in
removing solids and abrasive materials
from the seal area – in some cases
more than tripling the normally expected
mechanical seal life.
RP8C
RP4K
150
200
60
40
RP8A
RP4G
200
1000
80
100
60
20
Lubricant prevents dry running of the seal faces while priming,
repriming, and standby. The dry run gland is connected to a
lubricant reservoir so that shaft rotation provides circulation and
cooling of the lubricant.
350
17000
100
RP6C
RP4F
1100
160
RP4D
450
400
15000
180
120
Curves are based on a specific gravity of 1.0
16000
200
140
1000
designed with the environment in mind.
By incorporating a positive sealing float
box and an integrally mounted diaphragm
vacuum pump into the priming assembly,
environmental contamination associated
with the priming system is virtually
eliminated.
TRASH PUMP PERFORMANCE
TOTAL HEAD
PSI
FT
14000
M
900
THIS PRIMING SYSTEM is specifically
G O R M A N - R U P P
R E D I - P R I M E
T H E
R I G H T
Self-Priming
Centrifugal Pumps
Gorman-Rupp portable, engine-driven,
self-priming centrifugal pumps are
ideal for standby and emergency
clean-up applications.
Pumps can handle up to 3" diameter
solids, depending on model. Pumps
to suit other applications are also
available.
P U M P
FO R
T H E
J OB
Mine Permissible Models
Submersible Pumps
UTILITY PUMPS
Specifically designed for safe,
dependable operation in coal and
gassy mines.
An extensive line of high-volume,
high-head submersibles for every
application.
Pumps are approved by the Mine
Safety And Health Administration
(MSHA).
Slimline models for drilled wells,
narrow cofferdams and other hardto-reach places. Wide base models
for open pits and quarries.
OTS offers the most complete line
of small utility pumps for the end
user. Whether it’s a light-in-weight
self-priming portable pump or
maybe a diaphragm or lightweight
submersible, you can count on
Gorman-Rupp to have the products
when you need them.
Pumps available in 2" to 6" sizes.
Capacities to 2100 GPM, heads to 380'.
Optional wheel kit provides portability
for easy access to the job site.
Trash-handling models for tough
solids and abrasive liquids and
slurries.
Pumps available in 1.5" to 10" sizes.
Capacities to 3500 GPM, heads to 170'.
Pumps available in 1.5" to 20" sizes.
Capacities to 12000 GPM, heads to 600'.
Most of these products are in stock,
ready to ship, when you need one
of our Off The Shelf (OTS) pump
products.
Product information is subject to change; consult factory for details.
The Gorman-Rupp Company
Mansfield Division
P.O. Box 1217
Mansfield, Ohio 44901-1217, USA
Tel: 419-755-1011
Fax: 419-755-1251
E-mail: [email protected]
AV-05401_0208
The Gorman-Rupp International Company
P.O. Box 1217
Mansfield, Ohio 44901-1217, USA
Tel: 419-755-1011
Fax: 419-755-1266
E-mail: [email protected]
Gorman-Rupp of Canada, Ltd.
70 Burwell Road
St. Thomas, Ontario N5P 3R7, Canada
Tel: 519-631-2870
Fax: 519-631-4624
E-mail: [email protected]
GRpumps.com
©2008 The Gorman-Rupp Company. All rights reserved.
Printed in the USA