docPRESSING | ROLLING | BENDING
download 
Report Transcription
PRESSING | ROLLING | BENDING
PRESSING | ROLLING | BENDING 1 Viking Drive Wacol Qld 4300 CATTLE WATER TROUGHS Dear Owner or Manager, I would like to introduce myself and our Manufacturing Company Bend-Worx. We are located at Wacol, south west of Brisbane. One of our base products is a range of Water Troughs. They are manufactured from 1st grade quality steel, with the shape being either Flat Bottom or Half Round. Hot dipped galvanising is used, or heavy duty black steel (not galvanised). They were designed by Cattle People Over the last 12 years we have sold a successful number (6,000 plus) into many cattle Stations and states. Constant heat and bad water conditions have never been a problem. When most suitable, and you have a need for new troughs, I would like to discuss our products with you. Please find attached our Water Trough flyer. A price listing, which also details our discount for larger orders, is available on request. Please contact me if I can assist in any way. Your sincerely, Doug Edden: 07 32885058 Mobile: 0432 634 805 Email: [email protected] UCTS NEW PRODalf Round yH Heavy Duteel Troughs Black St e Pricing CompetitivDetails Call for Flat Bottom 3, 44 & & 5mm 5mm thick thick Galvanised Galvanised Steel Steel 3, Size - 1200mm wide x 400mm deep • Lengths - 3, 6, 9 metres Hot dipped galvanised 3mm Galvanised Steel Size - 630mm wide x 330mm deep • Lengths - 3, 6, 9 metres Half Round 5mm Galvanised Steel Size - 650mm OD x 325 deep • Lengths 3, 6, 9 metres Size - 762mm OD x 380mm deep • Lengths - 3, 6, 9 metres Heavy Duty Black Steel 6mm and 8mm thick Size - 750mm and 650mm OD • Lengths - 3, 6, 9 metres Not Galvanised - 6000 in service Designed by Cattle People * Troughs can be custom made to suit your requirements. 1 VIKING DRIVE WACOL QLD 4076 PHONE 07 3271 1377 FAX 07 3271 1477 CUTTING | ROLLING | BENDING ABN 63 115 668 043 [email protected] www.bendworx.com.au Price List - Stock Troughs HOT DIPPED GALVANISED 250 GRADE MS Flat Bottom Type, Galvanised Mild Steel (grade 250) Dimensions Capacity (litres) $ Price (including GST) 3mm thick x 3000 Long 630 wide x 330 deep 540 950.00 3mm thick x 6000 Long 630 wide x 330 deep 1080 1500.00 3mm thick x 9000 Long 630 wide x 330 deep 1620 2390.00 3mm Float Cover to Suit 315.00 3mm thick x 3000 Long 1200 wide x 400 deep 1200 1125.00 3mm thick x 6000 Long 1200 wide x 400 deep 2400 1640.00 3mm Float Cover to Suit 365.00 4mm thick x 3000 Long 1200 wide x 400 deep 1200 1245.00 4mm thick x 6000 Long 1200 wide x 400 deep 2400 2125.00 4mm thick x 9000 Long 1200 wide x 400 deep 3600 2665.00 3mm Float Cover to Suit 365.00 5mm thick x 3000 Long 1200 wide x 400 deep 1200 1520.00 5mm thick x 6000 Long 1200 wide x 400 deep 2400 2390.00 5mm thick x 9000 Long 1200 wide x 400 deep 3600 3140.00 3mm Float Cover to Suit 365.00 NOTES: All troughs come complete with wash-out and bungs (end compression type or bottom plug type) Lead times to suit your reasonable requirements. Transport is the client’s responsibility. PRICES: All prices listed Include GST Pricing based on quantities of 1 – 4 off. Discounts apply for larger quantities of Troughs only as follows: 5 – 9 off Less 5.0% 10 – 15 off Less 10% 15 – 20 off Less 12.5% 20 – 25 off Less 15.5% Ex Works, Wacol (unless noted otherwise) Contact: Doug Edden - Phone: (07) 3288 5058, Mobile: 0432 634 805, Email: [email protected] Price List - Stock Troughs HOT DIPPED GALVANISED 250 GRADE MS Half Round Type, Galvanised Mild Steel (grade 250) Dimensions Capacity (litres) $ Price (Including GST) 5mm thick x 3000 Long 650 OD x 325 deep 610 1445.00 5mm thick x 6000 Long 650 OD x 325 deep 1220 1990.00 5mm thick x 9000 Long 650 OD x 325 deep 1830 2740.00 3mm Float Cover to Suit 370.00 5mm thick x 3000 Long 762 OD x 380 deep 695 1520.00 5mm thick x 6000 Long 762 OD x 380 deep 1390 2140.00 5mm thick x 9000 Long 762 OD x 380 deep 2085 2965.00 3mm Float Cover to Suit 370.00 HEAVY DUTY BLACK STEEL 250 GRADE MS Half Round Type, (not galvanised) Dimensions Capacity (litres) $ Price (Including GST) 6mm thick x 3000 Long 650 OD x 325 deep 400 849.00 6mm thick x 6000 Long 650 OD x 325 deep 800 1698.00 6mm thick x 9000 Long 650 OD x 325 deep 1200 2414.00 3mm Float Cover to Suit 370.00 8mm thick x 3000 Long 750 OD x 380 deep 550 980.00 8mm thick x 6000 Long 750 OD x 380 deep 1100 2057.00 8mm thick x 9000 Long 750 OD x 380 deep 1650 2951.00 3mm Float Cover to Suit 370.00 NOTES: All troughs come complete with wash-out and bungs (end compression type or bottom plug type) Lead times to suit your reasonable requirements. Transport is the client’s responsibility. PRICES: All prices listed Include GST Pricing based on quantities of 1 – 4 off. Discounts apply for larger quantities of Troughs only as follows: 5 – 9 off Less 5.0% 10 – 15 off Less 10% 15 – 20 off Less 12.5% 20 – 25 off Less 15.5% Ex Works, Wacol (unless noted otherwise) Contact: Doug Edden - Phone: (07) 3288 5058, Mobile: 0432 634 805, Email: [email protected]
