Data sheets - di

LHT 51 M 200 G3-T3
Laser Diffuse Sensor with Background
Suppression
Automatic adjustment of transmit power
Red light laser, with small laser spot
4-turn potentiometer
Electronical background suppression
Bright LED, Connector M8 with ring LED
Light/dark switching
27.5
12.5
= brown
= black
= blue
15
40
10
Safety instructions
M4x0.7 (2x)
Opt. Achse Sender
Opt. axis transmitter
7
47
LED
Output
M8
3
10
34
44
LED
Status
Opt. Achse Empfänger
Opt. axis receiver
50
20
Sens.
4-turn
10
NO/NC
Inproper use may result in hazardous radiation exposure. Pay attention to
accident prevention rules and laser class. The instruments are not to be used for
safety applications, in particular applications in which safety of persons depends
on proper operation of the instruments. These instruments shall exclusively be
used by qualified personnel.
13
BN
BK
BU
9
3
37
TECHNICAL INFORMATION (typ.)
+20°C, 24V DC
Operating principle
Diffuse reflective sensor
Evaluation
digital
Size
50 x 40 x 15 mm (Dimensions)
Design
cuboid design
Emitted light
Red light laser, 650 nm, clocked
Laser class
1 (IEC 60825-1)
Service voltage
10 ... 35 V DC
Internal power consumption
25 mA, (24 V DC)
background suppression
yes
Diameter of light spot
Ø 1,5 mm
Operating distance
50 ... 200 mm
Sensitivity adjustment
potentiometer
Switching output
Push pull, 200 mA, NO/NC, switchable
Switching hysteresis
6 % typ.
Display
LED: green - operation, yellow - output
Voltage drop
2,0 V
Switching frequency
500 Hz
Reproducibility
0,5%
Ambient temperature
-10 … +50 °C
Ambient light immunity
5 kLx
Insulation voltage endurance
500 V
Protection class
IP 67
Protection degree
III, operation on protective low voltage
di-soric GmbH & Co. KG
Steinbeisstraße 6
Fon + 49 (0) 71 81 / 98 79 - 0
Ø 4.3 (3x)
DE-73660 Urbach
Fax + 49 (0) 71 81 / 98 79 - 179
208132
[email protected]
www.di-soric.com
© di-soric | Subject to modifications | 14/10/16 | Page 1 (2)
LHT 51 M 200 G3-T3
Laser Diffuse Sensor with Background
Suppression
TECHNICAL INFORMATION (typ.)
+20°C, 24V DC
Casing material
Die-cast zinc black lacquered finish
Material
polycarbonate (Window)
Connection
Connector, M8, 3-poled
Connecting cable
TK ...
di-soric GmbH & Co. KG
Steinbeisstraße 6
Fon + 49 (0) 71 81 / 98 79 - 0
DE-73660 Urbach
Fax + 49 (0) 71 81 / 98 79 - 179
208132
[email protected]
www.di-soric.com
© di-soric | Subject to modifications | 14/10/16 | Page 2 (2)