Fixings, Fasteners and Supports

Transcription

Fixings, Fasteners
and Supports
Featured Products
Prepared For
Argco
CADDY® ROD LOCK Threaded Rod Mounting System
The CADDY® ROD LOCK family of products allows contractors to prefabricate complex assemblies at ground level or offsite, and then
easily lift and lock them into place by pushing the threaded rod supports into the anchor screw, channel nut or beam clamp. This
ingenious technology works with threaded rod with burrs or imperfections, helping to eliminate clean-up time or the need to replace
damaged threaded rod.
The most unique feature of the system is its breakthrough “push-to-install” design, which dramatically reduces the installation time
of threaded rod support structures when compared to conventional fasteners. Simply speaking – CADDY ROD LOCK is revolutionizing
how contractors support conduit, cable tray, lights, ductwork and pipe by helping to make installations faster, easier and more secure.
•
•
•
•
System includes the CADDY® ROD LOCK Beam Clamp, Anchor Screw, Channel Nut and SN Series Nut
Prefabricated assemblies easily lift and lock into place, helping to save time and money
Works with slightly damaged threads and minor burrs on the threaded rod
System helps reduce installation time up to 52%
CADDY® ROD LOCK Beam
Clamp
CADDY® ROD LOCK Anchor
Screw
Fast, easy solution for attaching
threaded rod assemblies to metal
beam structures.
Push-to-install threaded rod support
for concrete or brick.
CADDY® ROD LOCK Channel
Nut
SN Series Nut
Innovative slotted design allows side
mounting of the nut to threaded rod.
Ideal for retrofit projects.
Attaches threaded rod to standard
strut profiles.
2
www.erico.com
CADDY® ROD LOCK Beam Clamp
• Easy "push-to-install" design allows installers to simply push the threaded rod through the mounting hole, instantly locking it into
position
• Works with slightly damaged threads and minor burrs on the threaded rod
• Reduces installation time up to 60%
Material: Cast iron
Finish: Electro-galvanized
Part Number
CRLB37EG
Rod Size
RS
Flange Thickness
FT
Height
H
Length
L
Width
W
A
Static Load
F
3/8"
1/8" – 7/16"
1 3/16"
2.06"
1"
0.98"
500 lb
For use on plain and electro zinc plated hardware only.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/2 turn added.
www.erico.com
3
CADDY® ROD LOCK Anchor Screw
• For use with concrete and solid brick
Material: Steel
Part Number
CRLA37EG
Rod Size
RS
A
B
C
Drill Bit Size
Drill Hole Depth
Static Load
F
3/8"
2 7/8"
1 1/4"
7/8"
5/16"
2"
660 lb
Tested in 3000 psi (20.67 Mpa) concrete.
4
www.erico.com
CADDY® ROD LOCK Channel Nut
• Provides fast universal attachment of threaded rod and hardware to standard strut profiles
Material: Cast iron
Part Number
CRLS37EG
Rod Size
RS
A
B
C
D
Static Load
F
3/8"
0.91"
1.4"
0.77"
0.53"
750 lb
www.erico.com
5
SN Series Nut
•
•
•
•
•
Allows side mounting of nut to threaded rod
Reduces the need for threading compared to standard nuts and washers
Ideal for retrofit projects, such as trapeze installations
Works with slightly damaged threads and minor burrs on the threaded rod
Reduces installation time up to 50%
Material: Steel
Rod Size
RS
A
B
Static Load
F
SN25
1/4"
3/4"
7/8"
500 lb
SN37
3/8"
3/4"
7/8"
1,350 lb
SN50
1/2"
3/4"
7/8"
2,250 lb
Part Number
6
www.erico.com
CADDY® PYRAMID Rooftop Supports
Versatile CADDY® PYRAMID rooftop supports offer superior load capacity and dramatically reduce installation time by replacing slow,
heavy and labor-intensive methods for support of pipe, conduit, duct, cable tray and equipment. Unlike wood blocks, CADDY PYRAMID
supports are specifically designed for rooftop applications, incorporating unique materials and finishes that protect roof membranes
and provide superior corrosion protection.
CADDY® PYRAMID ST StrutBased Supports
CADDY® PYRAMID RL RollerBased Supports
A strut-based support utilizing an
engineered thermoplastic base with
a UV stabilizer. Offers excellent load
distribution with high load ratings.
A polymeric roller-based support that
helps ensure long-lasting performance
and smooth roller actions. Provides
superior durability for rooftop
environments.
CADDY® PYRAMID EZ
Rubber-Based Supports
CADDY® PYRAMID 50 FoamBased Support
EPDM rubber-based and heightadjustable. Requires no tools or
fittings, making installations easier
than ever.
The original CADDY® PYRAMID design
provides lightweight support with
roof-friendly materials.
CADDY® PYRAMID H-Frame
CADDY® PYRAMID
Equipment Supports
A fast and economical solution that
keeps installation costs low and allows
flexibility in fabricating the H-frame on
site.
A fast, flexible and innovative system
for supporting heavy-duty mechanical
services on rooftop surfaces.
CADDY® PYRAMID
Accessories
Rubber mats and retainer straps for
CADDY PYRAMID ST and RL series.
www.erico.com
7
CADDY® PYRAMID ST Strut-Based Supports
CADDY® PYRAMID ST Fixed
Strut Supports
CADDY® PYRAMID ST
Adjustable Strut Supports
Provides a fixed-height mounting
platform 4.8" or 6.4" (122 mm or 164
mm) off the roof surface with 10" to
18" (254 mm to 457 mm) of usable
strut length.
Allow elevation changes of up to
16" (406 mm) off the roof surface
with 10" or 16" (254 mm or 406 mm)
of usable strut length.
CADDY® PYRAMID ST Bridge
Assemblies
Provides a fixed-height mounting
platform 5" (127 mm) off the roof
surface with 24" to 48" (610 mm to
1219 mm) of usable strut length.
8
www.erico.com
CADDY® PYRAMID ST Fixed Strut Supports
•
•
•
•
•
•
•
Strut-based thermoplastic support designed specifically for rooftop applications
Provides superior support for pipe, conduit, duct, cable tray and equipment
Solid bottom surface protects the roof membrane from damage caused by concentrated pressure
Offers excellent load distribution with high load ratings
Base is manufactured from UV-stabilized thermoplastic material
Engineered for long-lasting performance
Supports green building requirements; thermoplastic bases are made from recycled material and can contribute to earning LEED
credit
Material: Steel, Polypropylene
Finish: Hot-dip galvanized
Temperature: -30 – 130 °F
Static Load Safety Factor: 3:1
Height
H
Length 1
L1
Length 2
L2
Width
W
Surface Area
Weight
Static Load
F
RPS360400
4.8"
10"
12 1/2"
8"
95 in²
3 lb
1,000 lb
RPS360401
6.4"
10"
12 1/2"
8"
95 in²
5 lb
1,000 lb
RPS360403
4.8"
16"
18 1/2"
8"
141 in²
5 lb
1,500 lb
RPS360404
6.4"
16"
18 1/2"
8"
141 in²
7 lb
1,500 lb
Part Number
Static load at 73.1 kPa (10.6 psi) roof loading. Contact project or roofing engineer for maximum allowable load on individual project roof system.
www.erico.com
9
CADDY® PYRAMID ST Adjustable Strut Supports
•
•
•
•
•
•
•
Provides superior support for pipe, conduit, duct, cable tray and equipment
credit
Material: Steel, Polypropylene
Height
H
Length 1
L1
Length 2
L2
Width
W
RPS360402
5" – 12"
10"
12 1/2"
RPS360405
5 1/2" – 17"
16"
18 1/2"
Part Number
Surface Area
Static Load
F
8"
95 in²
1,000 lb
8"
141 in²
1,500 lb
Static load at 73.1 kPa (10.6 psi) roof loading. Contact project or roofing engineer for maximum allowable load on individual project roof system.
10
www.erico.com
CADDY® PYRAMID ST Bridge Assemblies
CADDY® PYRAMID ST Bridge Assemblies provide superior support for pipe, conduit, cable tray, equipment, walkway systems and many
other applications. CADDY® PYRAMID ST Bridge Assemblies are ideal for runs of multiple pipe/conduit in parallel.
•
•
•
•
•
•
•
Provides superior heavy duty support for pipe, conduit, duct, cable tray and equipment
Replaces wood blocks that rot easily when exposed to rooftop weather conditions
credit
Material: Polypropylene, Steel
Length 1
L1
Length 2
L2
Width
W
Height
H
Surface Area
Weight
Static Load
F
RPS360414
24"
26 1/2"
8"
4.81"
188 in²
6 lb
2,000 lb
RPS360415
30"
32 1/2"
8"
4.81"
188 in²
7 lb
2,000 lb
RPS360417
36"
38 1/2"
8"
4.81"
188 in²
8 lb
2,000 lb
RPS360418
42"
44 1/2"
8"
4.81"
282 in²
10 lb
3,000 lb
RPS360419
48"
50 1/2"
8"
4.81"
282 in²
11 lb
3,000 lb
Part Number
Static loads are assumed to be uniformly distributed.
www.erico.com
11
CADDY® PYRAMID EZ Rubber-Based Supports
CADDY® PYRAMID EZ rubber-based supports feature a wide platform base design to provide reliable support and distribute load across
roof surface. These versatile supports are fast and easy to install compared to wood blocks and metal straps.
•
•
•
•
Quick height adjustment accommodates for uneven roofs or sloped condensate lines
No tools or fasteners needed; fast snap-on installation
Design sheds water and helps reduce pipe corrosion
Roof-friendly; made of UV-stabilized EPDM material
Material: EPDM-SBR rubber
Rigid Conduit/
Pipe Size
Outer Diameter
OD
Height
H
Length
L
Width
W
Weight
Ultimate
Static Load
F
RPSE1H24
1"
1.315"
1 3/4" – 4"
4"
6"
2 lb
170 lb
RPSE1H57
1"
1.315"
5" – 7"
4"
6"
3 lb
170 lb
RPSE2H46
2"
2.370"
4" – 6"
4"
6"
3.3 lb
250 lb
RPSE4H46
4"
4 1/2"
4" – 6"
4"
9 1/2"
5.1 lb
400 lb
Part Number
Ultimate load at 1/4" (6.35 mm) deflection. Contact project or roofing engineer for maximum allowable load on individual project roof system.
12
www.erico.com
CADDY® PYRAMID 50 Foam-Based Support
•
•
•
•
•
Replaces slow and labor-intensive installation methods
Supports pipe, conduit, cable tray and equipment on roofs and below raised floors
Easily increase load capacity by combining similar CADDY® PYRAMID supports
Protects the roof membrane while absorbing shock and vibration, without absorbing water
Metal cover protects against weather and other environmental conditions, such as bird damage
Material: Steel, Polyethylene
Height
H
Length
L
RPS50H4EG
4"
RPS50H6EG
6"
RPS50H4HD
4"
RPS50H6HD
6"
Part Number
Width
W
Static Load
F
10 3/8"
4"
50 lb
10 3/8"
4 3/4"
50 lb
10 3/8"
4"
50 lb
10 3/8"
4 3/4"
50 lb
www.erico.com
13
CADDY® PYRAMID RPS H-Frame Series Support System is a fast and economical solution for a variety of rooftop applications. It
provides superior support for pipe, conduit, ductwork, cable tray, or any combination of these without causing damage to the rooftop
membrane. You provide your own channel, which keeps the installation cost low and allows flexibility in fabricating the H-frame onsite.
Post Base
Kit
Individual post base with pre-installed
hardware gives you the flexibility to
create your own frame work.
Includes two post bases with preinstalled hardware and additional
hardware kit to construct an H-Frame.
14
www.erico.com
CADDY® PYRAMID H-Frame Post Base
•
•
•
•
•
•
•
•
Integral foam or rubber pad provides gentle interface for all roof types
Rubber rooftop interface ideal for solar panel array installations
Accepts standard strut channels
Mounting hardware pre-installed in bases
credit
Material: Polypropylene, Polyethylene, Steel
Rooftop
Interface
Strut Type
Height
H
Length
L
Width
W
Surface Area
Weight
Static Load
F
RPS360422
Foam
A
4.60"
12 3/8"
12 3/8"
144 in²
3.9 lb
750 lb
RPS360423
Rubber
A
4.66"
12 3/8"
12 3/8"
144 in²
4.5 lb
750 lb
Part Number
www.erico.com
15
CADDY® PYRAMID H-Frame Kit
•
•
•
•
•
•
•
•
Integral foam or rubber pad provides gentle interface for all roof types
Rubber rooftop interface ideal for solar panel array installations
Accepts standard strut channels
Kit includes 2 post bases with pre-installed mounting hardware, 6 bolts, 6 strut nuts, and 2 L-brackets to complete H-frame
credit
Material: Polypropylene, Polyethylene
Rooftop Interface
Strut Type
Height
H
Length
L
Width
W
Surface Area
Static Load
F
RPS360420
Foam
A
4.60"
12 3/8"
12 3/8"
287 in²
1,500 lb
RPS360421
Rubber
A
4.66"
12 3/8"
12 3/8"
287 in²
1,500 lb
Part Number
Static load represents 750 lb (3,335 N) per post base. The end user must select and evaluate the strut framing to ensure the assembled H-frame can properly support the applied load.
16
www.erico.com
CADDY® PYRAMID RL Roller-Based Supports
CADDY® PYRAMID RL Fixed
Roller Supports
CADDY® PYRAMID RL
Adjustable Roller Supports
Provides roller capability for up
to 6" (DN150) nominal pipe with
5.5" (140 mm) fixed height.
Allow elevation changes of up to
16" (406 mm) off the roof with up to
6" (DN150) nominal pipe.
CADDY® PYRAMID RL Fixed Roller Supports
•
•
•
•
•
•
•
•
•
Roller-based Thermoplastic support designed specifically for rooftop applications
Roller capability allows longitudinal movement of pipe, such as from thermal expansion or contraction
Hot-dip galvanized finish on steel roller axle and fittings provides superior corrosion protection
Retainer straps available to prevent pipe from being dislodged
Supports up to 6" diameter (Nom.) Sch. 40 water-filled steel pipe at a maximum spacing of 10'
credit
Pipe Size
Height
H
Length
L
Width
W
Surface Area
Weight
Static Load
F
RPS360406
3" Max
5 1/2"
12 1/2"
8"
95 in²
4 lb
250 lb
RPS360408
6" Max
5 1/2"
18 1/2"
8"
141 in²
6 lb
600 lb
Part Number
www.erico.com
17
CADDY® PYRAMID RL Adjustable Roller Supports
•
•
•
•
•
•
•
•
Roller-based Thermoplastic support designed specifically for rooftop applications
Roller capability allows longitudinal movement of pipe, such as from thermal expansion or contraction
Hot-dip galvanized finish on steel roller axle and fittings provides superior corrosion protection
Supports up to 6" diameter (Nom.) Sch. 40 water-filled steel pipe at a maximum spacing of 10'
credit
Pipe Size
Height
H
Length
L
Width
W
RPS360407
3" Max
5 1/2" – 12"
12 1/2"
RPS360409
6" Max
5 1/2" – 16"
18 1/2"
Part Number
18
Surface Area
Weight
Static Load
F
8"
95 in²
5 lb
250 lb
8"
141 in²
6 lb
600 lb
www.erico.com
CADDY® PYRAMID Equipment Supports
The CADDY® PYRAMID Equipment Support is a fast, flexible and innovative system for supporting heavy-duty mechanical services on
rooftop surfaces.
•
•
•
•
Supports chillers, air conditioners and other mechanical systems
Innovative base design evenly distributes load to help prevent damage to roof membrane
Innovative crossbar and equipment-support clamps enable quick assembly
credit
CADDY® PYRAMID
Equipment Support Kit
www.erico.com
CADDY® PYRAMID
Equipment Support Post Base
19
CADDY® PYRAMID
Equipment Support Clamp
CADDY® PYRAMID Equipment Support Kit
•
•
•
•
•
•
•
•
Kit includes post-base assemblies, frame and equipment-support clamps
Assembles and adjusts to size and height in minutes by one person with one tool
Innovative crossbar and equipment-support clamps enable quick assembly
Integral foam pad provides gentle interface for all roof types
Hot-dip galvanized finish provides superior corrosion protection
Assembled support can be lifted as one unit and easily relocated
Available in 4- or 6-post base configurations
credit
Material: Steel, Polypropylene, Polyethylene
Height : 12" – 18"
Length: 62 1/2"
Post Base
A
Square Tube
B
Cross Bar
Assembly
C
Width
W
Surface Area
RPS360426
12" x 4 pc
42" x 2 pc
48 1/2" x 2 pc
49 1/2"
RPS360427
12" x 6 pc
78" x 2 pc
48 1/2" x 4 pc
85 1/2"
Part Number
Weight
Ultimate
Static Load
F
575 in²
79 lb
1,120 lb
862 in²
123 lb
2,240 lb
Static load must be stable and uniformly distributed across frame.
20
www.erico.com
CADDY® PYRAMID Equipment Support Post Base
•
•
•
•
•
Ideal for use with strut channel type A and U-shaped brackets to create custom equipment supports
Height adjustable
Innovative base design evenly distributes load to help prevent damage to roof membrane
credit
Material: Steel, Polypropylene, Polyethylene
Height
H
Length
L
Width
W
Surface Area
Weight
Static Load
F
12" – 18"
12"
12"
144 in²
9 lb
750 lb
Part Number
RPS360425
The end user must select and evaluate the strut framing to ensure the custom assembled equipment support can properly support the applied load.
CADDY® PYRAMID Equipment Support Clamp
• Ideal for use with strut channel type A and square tube to create custom equipment supports
• Slotted design offers fast and easy installation
Material: Steel
Part Number
RPS360428
www.erico.com
Strut Type
Length
L
Width
W
A
B
A
2 1/2"
3.7"
2.1"
2.3"
21
CADDY® PYRAMID Accessories
Rubber Mat
Retainer Strap
Rubber Mat
• For use with CADDY PYRAMID ST and RL Series strut and roller-based supports
• Made of UV stabilized recycled material
• Dampens vibration and reduces sound
Material: EPDM-SBR rubber
Part Number
A
B
C
D
E
RPS360410
13 1/2"
9"
1"
1/2"
1/2"
RPS360411
19 1/2"
9"
1"
1/2"
1/2"
22
www.erico.com
Retainer Strap
• Prevents pipe from being dislodged from roller supports
• Innovative twist-lock design allows for easy installation without requiring hardware removal
• Robust 3/16” (4.8 mm) strap won’t deform easily if bumped
Material: Steel
Pipe Size
Hole Size
HS
Height
H
Width
W
Thickness
T
A
B
C
RPS360412
3" Max
0.53"
2.60"
1"
3/16"
4 1/2"
13"
6"
RPS360413
6" Max
0.53"
4.68"
1"
3/16"
8"
21.84"
10"
Part Number
cULus is a registered certification mark of UL LLC. FM is a registered certification mark of FM Approvals LLC, LTD.
WARNING
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your
ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction,
property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing
to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its
standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred.
ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either
repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR
ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY
PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event
exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR
MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
Copyright © 2013 ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
www.erico.com
23

Fixings, Fasteners and Supports

Transcription

Similar documents

Capitalism Is a Pyramid Scheme

Do you want CADDY® with that?

x467q woag jcbn m68QE TYUIO DFJKXVB

Make an ironing-board cover with a matching sewing

master catalog 2015-2016

Brotherwood (Page 1) - Brotherwood® Wheelchair Accessible

Pectacular TW Lewis Home With Lots Of Upgrades!

Whiteshell Resort For Sale Caddy Lake

500 Cid Caddy Engine Swap