JET MILL MC 300 KX-TD

Just Say “Mic Mac”
CHRISPRO© JET-MILL - MC 300 KX - TP (top discharge) - Micronizing Plant
High Volume Production Micronization Plant (similar to all production sizes from 300 to
900)
An Industrial scale micronizing plant, designed to process large batches of powders.
The system is comprised a 20'' Jet Mill, entirely made of 316-L mirror polished, with
top discharge of the micronized product and the possibility to interchange the ring
and sets of nozzles with different angles.
Feeding is by a screw feeder mounted on a stainless steel support and controlled by
an electronic speed adjustment system.
A sanitary cyclone is supplied for recovery of the micronized products coming out the
jet-mill. The cyclone is equipped with an inspection door for easy filter and cleaning
access.
A silencer is mounted directly on the inlet cone of the micronizer to
reduce the noise level.
The mill is connected to the filter by a flexible 8” pharmaquality pipe (flex or stainless).
A NEMA 4X control cabinet houses the pressure
regulators, manometers and full electrical control.
The unit is supported on a GMP stainless steel
frame.
All the parts of the plant are easy to assemble
and clean.
We can offer many options such as:
• Jet-mill internally lined with special materials
(PTFE, PEEK, Boron Carbide)
• A special hopper for the feeder
• The plant in explosion protection
• Automatic discharge system
• Designed for sterile manufacturing
• The connection pipe in 316 L
• PLC control with HMI (Allen Bradley)
• Isolated design (for high potency)
SERVOLiFT
105-B West Dewey Ave
Wharton, NJ 07885
Ph: 973-442-7878 - www.servo-lift.com
CHRISPRO© Patented
Size Reduction
Technology
•
``````
The Advantage: 2 FDA Testing and Tolling facilities, Patented Technology, Multi-Angle Grinding
Profile
MC 300 Plant
Technical details of the MC 300 KX TP
Dimensions (L x W x H)
160” x 100” x 165”
Support structure
All 304 stainless, #4 pharma-finsih*
Air supply consumption
230 cu/ft minute @ 105 psi
Absolute filter class
HEPA
* Mirror polished upon request
Technical details of the Grinding Chamber System
Diameter of the grinding chamber
12”
Chamber Weight
236 lbs
Micronized Material Outlet
Top Discharge System
Chamber body dimensions
18.3” diameter x 3.74” high
Number of grinding nozzles
8
Nozzles angles
Adjustable from 19˚ to 44˚
Material
316L stainless, Mirror Polished
Covering / Liner
Virgin FDA quality Teflon
Max. Inlet Particle Size
1.5 mm max.
Final Particle Size
0.5 - 10 µm
Feed-rate
5 to 500 Kg/hour*
* The feed-rate and the final fineness depends on the characteristics of
the products being micronized.