Parts Manual: 100EFDC (Master)

Transcription

Lastec Deck 100EFDC
John Deere Part #: LP35529
Parts Manual
Manual Part #: Man-100EFDC
Serial #37930710 and later
LASTEC
7865 N County Road 100E
Lizton, Indiana 46149
Phone (317) 892-4444 Fax (317) 892-4188
www.lastec.com
8
Lastec, 2008
Printed in the United States of America, all rights reserved. No part of this manual may be
reproduced in any form by any photographic, electronic, mechanical or other means or
used in any information storage and retrieval system without written permission from
Lastec, Inc.
7865 N. County Road 100E
Lizton, IN 46149
Table of Contents
SECTION 1
1.1
1.2
1.3
1.4
3
1-1
MOUNTING HARDWARE
2-1
Hardware Kit (100EFD1565 Only) ........................................................................... 2-2
Mounting Framework (Serial #36420310 and prior) ................................................ 2-4
Mounting Framework (Serial #36430310 and later) ................................................. 2-6
Mount Step Assembly ............................................................................................... 2-8
SECTION 3
3.1
3.2
3.3
3.4
3.5
GENERAL INFORMATION
How To Use The Parts List ....................................................................................... 1-2
Torque Values ........................................................................................................... 1-3
Decal Locations ......................................................................................................... 1-4
Belts and Deck Weldments ....................................................................................... 1-8
SECTION 2
2.1
2.2
2.3
2.4
Section-Page
DRIVE SYSTEM
3-1
Gearbox Idler (Serial #40950911 to 57090616)........................................................ 3-2
Gearbox Idler (Prior to Serial #40950911)................................................................ 3-4
Gearbox Kit (Prior to Serial #57100616) .................................................................. 3-6
Superior Gearbox....................................................................................................... 3-8
PTO 049617............................................................................................................. 3-10
Lastec//090616
Table of Contents
Table of Contents
SECTION 4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
4.19
4.20
4.21
4.22
4.23
4.24
4.25
4.26
4.27
4.28
4.29
4.30
4.31
4.32
4.33
4.34
MOWER DECKS
4-1
Deck 1 Hardware....................................................................................................... 4-2
Double Pulley Spindle (Serial #46331112 and later) ................................................ 4-4
Spindle Housing, Decks 1, 2, 4 and 5 (Serial #46331112 and later)......................... 4-6
Double Pulley Spindle, Decks 1, 5 (Prior to Serial #46331112)............................... 4-8
Spindle Housing (Prior to Serial #46331112) ......................................................... 4-10
Deck 1 Idler Assembly ............................................................................................ 4-12
Anti-Scalp Roller Assembly (Optional) .................................................................. 4-14
Deck 2 Hardware..................................................................................................... 4-16
Deck 2 Covers ......................................................................................................... 4-18
Double Pulley Spindle (Serial #46331112 and later) .............................................. 4-20
Double Pulley Spindle, Decks 2, 4 (Prior to Serial #46331112)............................. 4-22
Deck 3 Hardware..................................................................................................... 4-24
Triple Pulley Spindle, Deck 3 (Serial #46331112 to #55371015) .......................... 4-26
Spindle Housings (Serial ##46331112 to #55371015)............................................ 4-28
Triple Pulley Spindle (Prior to Serial #46331112).................................................. 4-30
Spindle Housings (Prior to Serial #46331112)....................................................... 4-32
Deck Drive Idler (Serial #48920813 and later) ....................................................... 4-34
Deck Drive Idler (Prior to Serial #48920813)......................................................... 4-36
Grass Discharge, Deck 3 ......................................................................................... 4-38
Deck 4 Hardware..................................................................................................... 4-40
Deck 4 Covers ......................................................................................................... 4-42
Deck 5 Hardware..................................................................................................... 4-44
Deck 5 Idler ............................................................................................................. 4-46
Rear Grass Discharge Deck 5.................................................................................. 4-48
Mulching Dam Kit................................................................................................... 4-50
Anti-scalp Rollers.................................................................................................... 4-52
9” x 3.5” Wheel Assembly, Solid (Serial #32841008 and later)............................. 4-54
Wheel Yoke Assembly ............................................................................................ 4-56
Wheel Yoke Assembly ............................................................................................ 4-58
Deck and 4 Wheel Yoke Assembly........................................................................ 4-60
Wheel Lift Rod Assembly ....................................................................................... 4-62
Deck Lift Cylinder Assembly.................................................................................. 4-64
Hydraulic Hoses ...................................................................................................... 4-66
Hardware Kit (CE Only) ......................................................................................... 4-68
SECTION 5
Table of Contents
Section-Page
INDEX
5-1
Lastec//090616
4
1
SECTION 1 GENERAL INFORMATION
Mower//090616
1-1
1
1.1
General Information
How To Use The Parts List
How To Use The Parts List

Use the table of contents or part number index to locate the part you need.

Go to the appropriate section and locate the part in the table and illustration.

Parts shown indented under another part are included with that part. IMPORTANT:
Assemblies marked with a diamond () are non-saleable and all the parts shown as
included need to be purchased separately.
See the sample table below. Sample Assembly A01111 includes part F02222-22 and subassembly A03333. The diamond () indicates that assembly A01111 is non-saleable and
all the parts shown as included need to be purchased separately. Subassembly A03333
includes parts S04444-4 and F07777-77. The diamond () indicates that subassembly
A03333 is non-saleable and all the parts shown as included need to be purchased separately.
REF
1
PART #
DESCRIPTION (Indicates Non-Saleable Items)
COMMENTS
A01111
Sample Assembly

F02222-22
Sample Part
A03333
Sample Subassembly
QTY.
1
1

1
2
S04444-4
Sample Part
1
3
F07777-77
Sample Part
1
To Order Parts:
1-2

From the continental U.S., call your local Lastec distributor to order parts. If there is
no Lastec distributor in your area, call 1-800-515-6798. Have your customer number, unit serial number, and part numbers ready when you call.

From other international locations, contact the Lastec distributor in your area for
parts.
Mower//090616
General Information
General Information
Torque Values
1.2
1
Torque Values
Below is a table of suggested torque values for this unit. Please use these torque values
on this unit unless otherwise specified.
Grade
Units
SAE 5
105000
PSI
Tensile
Strength
SAE 8
150000
PSI
Grade Mark
Bolt
Dia.
Threads.
Per In.
6
8
10
10
12
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
3/4
3/4
7/8
7/8
1
32
32
24
32
24
20
28
18
24
16
24
14
20
13
20
12
18
11
18
10
16
9
14
8
General Information
Units
in-lbs
in-lbs
in-lbs
in-lbs
in-lbs
in-lbs
in-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
ft-lbs
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
(Nm)
Mower//090616
SAE 5
SAE 8
20 (2.3)
24 (2.7)
35 (4.0)
40 (4.5)
50 (5.7)
95 (10.7)
95 (10.7)
17 (22.6)
20 (27.1)
30 (40.7)
35 (47.5)
50 (67.8)
55 (74.6)
75 (101.7)
85 (115.3)
105 (142.4)
115 (155.9)
150 (203.4)
160 (217.0)
170 (230.5)
175 (237.3)
302 (409.5)
300 (406.8)
466 (631.8)
30 (3.4)
45 (5.1)
50 (5.7)
65 (7.3)
125 (14.1)
150 (17.0)
23 (31.2)
25 (33.8)
40 (54.2)
45 (61.0)
65 (88.1)
70 (94.9)
100 (135.6)
110 (149.2)
135 (183.1)
150 (203.4)
195 (264.4)
210 (284.8)
220 (298.3)
225 (305.1)
473 (640.9)
400 (542.4)
714 (967.4)
1-3
1
General Information
1.3
Decal Locations
Decal Locations
Decal Locations (US Only)
REF
PART #
057523
1-4
DESCRIPTION
COMMENTS
Decal Kit, 100EF
QTY.
1
1
P478
Decal, Danger - Rotating Blades
5
2
043225
Decal, Articulator Logo Div WM
1
3
040911
Decal, Warning Operate With Guards
2
4
019549
Decal, Caution, 'Rotating Driveline'
1
5
040910
Decal, Warning Operate From Seat
1
6
019557
Decal, Lastec Logo Div WM
2
7
057524
Decal, 100in
2
8
040912
Decal, Danger, Thrown Objects/Arrow
2
9
062429
Decal, Lastec Made in USA
1
10
045651
Decal, No Step
2
11
063327
Decal, 3682/96 Gearbox Fluid
1
12
P442
Decal, Warning, Outer Decks
2
13
043224
Decal, Equipment, Height Adj EF
4
14
064660
Decal, Belt Diagram 100/120 ER/EF Deck
1
15
063393
Decal, 100EF
2
Lastec//090616
General Information
General Information
Decal Locations
1
P442
Never raise the outer
decks with the PTO
shaft engaged.
Damage to equipment
can result.
AVOID SERIOUS
INJURY OR DEATH
063327
100”
WARNING
100EF
100EF
063 32 7
P442
decks with the PTO
shaft engaged.
Damage to equipment
can result.
AVOID SERIOUS
INJURY OR DEATH
WARNING
100”
100EF
WARNING
AVOID SERIOUS
INJURY OR DEATH
decks with the PTO
shaft engaged.
Damage to equipment
can result.
100_054
P44 2
General Information
Lastec//090616
1-5
1
General Information
Decal Locations
Decal Locations (CE Only)
REF
PART #
057523
COMMENTS
Decal Kit, 100EF
QTY.
1
1
P478
Decal, Danger - Rotating Blades
5
2
043225
Decal, Articulator Logo Div WM
1
3
040911
Decal, Warning Operate With Guards
2
4
019549
Decal, Caution, 'Rotating Driveline'
1
5
040910
Decal, Warning Operate From Seat
1
6
019557
Decal, Lastec Logo Div WM
2
7
057524
Decal, 100in
2
8
040912
Decal, Danger, Thrown Objects/Arrow
2
9
062429
Decal, Lastec Made in USA
1
10
045651
Decal, No Step
2
11
063327
Decal, 3682/96 Gearbox Fluid
1
12
P442
Decal, Warning, Outer Decks
2
13
043224
Decal, Equipment, Height Adj EF
4
14
064660
Decal, Belt Diagram 100/120 ER/EF Deck
1
15
063393
Decal, 100EF
2
067065
Decal Kit, CE Deck
040267
1
Decal Kit, European Languages
2
040256
Decal, Warning, Outer Decks -- German
1
040257
Decal, Warning, Outer Decks -- French
1
040258
Decal, Warning, Outer Decks -- Italian
1
040259
Decal, Warning, Outer Decks -- Spanish
1
Decal, Warning, Outer Decks -- Danish
1
040260
P117
1-6
DESCRIPTION
Decal, Hands & Feet
7
041205
Decal, Thrown Objects CE Std
1
041206
Decal, Caution Symbol CE Std
2
041209
Decal, Keep Away/Rotating Drive Line CE
2
Lastec//090616
General Information
General Information
Decal Locations
1
CE
P44 2
decks with the PTO
shaft engaged.
Damage to equipment
can result.
AVOID SERIOUS
INJURY OR DEATH
WARNING
04120
063327
04120
100”
04120
100EF
100EF
0 63 32 7
P442
decks with the PTO
shaft engaged.
Damage to equipment
can result.
AVOID SERIOUS
INJURY OR DEATH
WARNING
100”
100EF
WARNING
AVOID SERIOUS
INJURY OR DEATH
decks with the PTO
shaft engaged.
Damage to equipment
can result.
100_149
P442
General Information
Lastec//090616
1-7
1
1.4
REF
1
General Information
Belts and Deck Weldments
PART #
DESCRIPTION
COMMENTS
QTY.
1
041630
Belt, Insta-Power 85830
2
2
P744 1
2
3
049855
Belt, B-128 Deck Drive
1
4
064268
Deck Weldment, EFC #1 Black
1
5
064256
Deck Weldment, #2 Black
1
6
064252
Deck Weldment, EF #3 Black
1
7
064261
Deck Weldment, #4 Black
1
8
064271
Deck Weldment, EFC #5 Black
1
P744 (or 067330) replaced 059144 Goodyear 85500 Belt (Serial #41020911 and later).
1-8
Lastec//090616
General Information
General Information
1
100_075
General Information
Lastec//090616
1-9
2
SECTION 2 MOUNTING HARDWARE
Mower//090616
2-1
2
2.1
REF
Mounting Hardware
Hardware Kit (100EFD1565 Only)
PART #
061940
061899
COMMENTS
QTY.
1
Arm Assembly, JD1565 Push
1
1
061894
Arm Weldment, JD1565 Left Push
1
2
040802
Pin, 3/8” x 3” Snapper
2
3
062431
Bracket Weldment, Push Arm
2
4
F05010-109
Nut, 1-8 Self Lock
2
5
F05004-183
Bolt, 1-8 x 4 1/4” Hex Head Grade8 w/Nylon
Patch
2
6
F05009-44
Bolt, 3/4-10x2 1/2 Hex Head Grade 5
2
7
F05010-104
Nut, 3/4-10 Jam
2
8
P107
Fitting, 1/4-28 Straight Grease
6
A126
Transfer Assembly, RS Weight
9
2-2
DESCRIPTION
Hardware Kit, 100EF Deere
2
P113
Pin, 1/4” Dia Lynch
1
10
W143
Rod Weldment, Weight Transfer
1
11
F05010-104
Nut, 3/4-10 Jam
1
12
W168
Tube Weldment, Weight Transfer
1
13
P175
Spring, 2” x 6” Blue
1
14
061895
Arm Weldment, JD1565 Right Push
1
049617
PTO Shaft Assembly, Deere 26”
See Section 3.5 for parts
1
See Section 4.33
2
029240
Hose Assembly, 1/4” Hyd x 80"
F05004-177
Screw, M4-.7 x 65 SHC
1
F05010-167
Nut, M4-.7 Prev Torq
1
Man-100EFD
Manual, 100EFD (Deere)
1
TCA13791
Enclosure Kit, Vehicle
TCB11475
Hydraulic Kit, Double Spool Auxiliary
John Deere’s Part Numbers
Shown
1
1
TCB10566
Transfer Kit, Hydraulic Weight
1
R66949
Quik-Tatch Weight, 42 Lbs.
4
TCB10303
Mounting Kit, Rear Weight
063360
Electrical Kit, 100EFD1565
1
100EFD1565 Only. Not Shown
1
063358
Main Harness, 100EFD
1
063359
Supplemental Harness, 100EFD
1
Lastec//090616
Mounting Hardware
Mounting Hardware
2
100_041
Mounting Hardware
Lastec//090616
2-3
2
2.2
REF
Mounting Hardware
Mounting Framework (Serial #36420310 and prior)
PART #
061657
061948 1
1
DESCRIPTION
COMMENTS
Frame Assembly, EF Center
QTY.
1
Cover Assembly, Main Frame
1
041685
Handle Assembly, 421D Deck Lift
1
1
S04827
Handle, Outrigger Jack
1
2
048644
3
F05010-156
Nut, 1/4-20 Half Nylock
4
4
F05011-11
Washer, 1/4” SAE Flat
4
5
041192
Clip, Handle Deck
1
6
041193
Bracket, Deck Bar Holder
1
7
015460
Grommet, 11/16” x 1” x 1 5/16” Rubber
1
8
F05006-102
Bolt, 5/16-18 x 3/4” Hex Head Grade 5 Zinc
5
9
F05011-13
Washer, 5/16” Split Lock
7
10
F05011-17
7
11
061947
Cover Weldment, Left Front Frame
1
12
061945
Cover, Front Right Frame
1
13
061944
Cover, Main Frame Rear
1
14
F05006-81
Bolt, 5/16-18 x 1 3/4” FT Hex Head Grade 5
2
15
061949
Spacer, Plastic 3/4” OD x .325” ID x 1”
2
16
F05005-15
Bolt, 1/4-20 x 1/2” Hex Head
4
17
061658
Weldment, E Main Frame
1
18
F05006-102
Bolt, 5/16-18 x 3/4” Hex Head Grade 5 Zinc
7
19
F05011-13
7
20
F05011-17
7
21
028352
Clamp, 1” ID Coated
2
22
061662
Cover, EF #3 Deck Right
1
23
061663
Cover, EF #3 Deck Left
1
24
P123
Fitting, Grease 90 Deg. 1/4-28
1
25
058204
Cover, Front Frame
1
26
058610
Idler Assembly, 521E Gear Box
1
27
059186
Yoke Assembly, Pivoting Wheel
2
Handle, Foam .625” x 6” x 3/16” Wall
1
Removed 067043 1 3/8”” Hole Plug Cover (Serial #55381015). Previously, 067043 replaced 043217 1-1/4” Hole Plug Cover. Deck
cover was redesigned to accept 067043 1-3/8” hole plug cover (7/11).
2-4
Lastec//090616
Mounting Hardware
Mounting Hardware
2
100_057B
Mounting Hardware
Lastec//090616
2-5
2
2.3
REF
Mounting Hardware
Mounting Framework (Serial #36430310 and later)
PART #
DESCRIPTION
COMMENTS
QTY.
064253
Frame Assembly, EF Center Black
1
061948
Cover Assembly, Main Frame
1
041685
Handle Assembly, 421D Deck Lift
1
1
S04827
Handle, Outrigger Jack
1
2
048644
Handle, Foam .625” x 6” x 3/16” Wall
1
3
F05005-212
Bolt, 1/4-20x3/4 GR5 FHCS Serrated
4
4
041192
Clip, Handle Deck
1
5
041193
Bracket, Deck Bar Holder
1
6
015460
Grommet, 11/16” x 1” x 1 5/16” Rubber
1
7
F05006-162
5
Cover Weldment, Left Front Frame
1
1
8
105614
9
105612
Cover Weldment, Right Front Frame
10
061944
Cover, Main Frame Rear
1
11
F05006-163
Bolt, 5/16-18x1-1/2 GR5 FHCS Serrated
2
12
F05010-220
Nut, 1/4-20 Flanged Hex Nylock
4
13
064254
Weldment, E Main Frame Black
1
14
F05006-160
2
15
028352
Clamp, 1” ID Coated
2
16
061662
Cover, EF #3 Deck Right
1
17
061663
Cover, EF #3 Deck Left
1
18
P123
1
19
058204
Cover, Front Frame
1
20
F05006-162
21
073440
22
059186
1
2
5
Idler Assembly, EFLW Main Drive
1
2
1
105614 replaced 061947 Cover Weldment, Left Front Frame and 105612 replaced 061945 Cover, Front Right Frame (Serial
#57100616 and later).
2 Replaced 063934 Idler Assembly, EFLW Main Drive (See Section 3.2 for parts) (5/11).
2-6
Lastec//090616
Mounting Hardware
Mounting Hardware
2
100_067B
Mounting Hardware
Lastec//090616
2-7
2
2.4
REF
Mounting Hardware
Mount Step Assembly
Mount Step Assembly
PART #
064386
2-8
DESCRIPTION
Step Assembly, EFDC Mount
COMMENTS
QTY.
1
1
064387
Step Weldment, EFDC
1
2
F05007-165
Bolt, 3/8-16 x 1” Carriage Grade 5
2
3
F05011-3
Washer, 3/8” Flat SAE
2
4
F05010-10
Nut, 3/8-16 Hex Nyloc
2
5
F05010-8
Nut, 1/2-13 Nylon Hex Lock
2
6
F05011-101
Washer, 1/2” SAE Flat Grade 5-8
4
7
F05009-74
Bolt, 1/2-13 x 2 3/4” Hex Head Grade 8 Plain
2
Lastec//090616
Mounting Hardware
Mounting Hardware
Mount Step Assembly
2
100_078
Mounting Hardware
Lastec//090616
2-9
3
SECTION 3 DRIVE SYSTEM
Mower//090616
3-1
3
3.1
REF
Drive System
Gearbox Idler (Serial #40950911 to 57090616)
PART #
063934
3-2
DESCRIPTION
Idler Assembly, EFLW Main Drive
COMMENTS
QTY.
1
1
F05010-177
Nut, 3/4-10 Stover Swaged
1
2
F05011-77
Washer, 3/4” AN Yel/Cad
2
3
029842
Bushing, 3/4” ID x 1” OD x 1” Oil
2
4
F05007-209
Bolt, 3/8-16 x 1 1/2” Hex Head Grade 8
1
5
F05008-144
1
6
063935
Idler Weldment, EFLW Main Drive
1
7
028963
Pulley, 4 “ OD Idler
1
8
F05011-2
1
9
F05010-127
Nut, 1/2-13 Half Nyloc
1
10
F05010-124
Nut, 3/8-16 Half Nylon Lock
2
11
P410
Spring, 1” x 7” Extension
1
Lastec//090616
Drive System
Drive System
3
100-116
Drive System
Lastec//090616
3-3
3
3.2
REF
Drive System
Gearbox Idler (Prior to Serial #40950911)
PART #
058610
3-4
DESCRIPTION
Idler Assembly, 521E Gearbox
COMMENTS
QTY.
1
1
F05010-177
1
2
F05011-77
1
3
029842
2
4
F05007-209
1
5
F05008-144
1
6
057160
Weldment, 521E Gear Box Idler
1
7
P408
Pulley, 4 “ OD Idler
1
8
F05011-2
1
9
F05010-8
1
10
F05010-29
Nut, 3/8-16 Jam
1
11
P410
1
12
F05010-124
1
Lastec//090616
Drive System
Drive System
3
100-003
Drive System
Lastec//090616
3-5
3
3.3
REF
Drive System
Gearbox Kit (Prior to Serial #57100616)
PART #
059147
COMMENTS
QTY.
1
1
028767
Gearbox, Superior R100 9AAB - B0216
2
047909
Guard, 325EF PTO Shaft
1
3
P744 1
2
4
0673181
Sheave, 2BK80H
1
5
019773
Bushing, Split Taper (H 7/8)
1
2
F05011-14
F05009-67
6
1
DESCRIPTION
Gearbox Kit, 100EFD
F05010-10
Bolt, 1/4-20 x 3/4” Hex Head Grade 8
Use 6oz. of 75W-90
1
Torque Value: 95-125 in.-lbs.
2
4
7
F05007-123
4
8
F05006-114
Screw, 5/16-18 x 3/4” FHSw/Nyloc Patch B/O
4
9
F05011-13
4
10
P04101-1
Key, #606 Woodruff
1
11
F05006-1
Bolt, 5/16-18 x 1” Hex Head
4
12
045371
Plate, EF Superior Gearbox Lft
1
13
045351
Plate, EF Superior Gearbox Rht
1
14
F05011-17
4
P744 (or 067330) replaced 059144 Goodyear 85500 Belt and 067318 replaced 059146 2BK65 Sheave to increase the blade tip
speed for better discharge and cut quality on units with serial #41020911 and later.
3-6
Lastec//090616
Drive System
Drive System
3
325015
Drive System
Lastec//090616
3-7
3
3.4
REF
Drive System
Superior Gearbox
Superior Gearbox
PART #
028767
DESCRIPTION
COMMENTS
Gearbox, Superior R100 9AAB-B0216
QTY.
1
1
F05006-111
Bolt, 5/16-18 x 1.25” SHCS
2
040644
Housing, R100 Mach Thru 1/8-3x
Torque to 17-21 ft.-lbs.
1
8
3
040650
End Cap CP 1.500-.187 D#7647
1
4
040643
Casting, R100 Tap
1
5
040615
Plug, 1/4-18 NPT Schd w/3m
4
6
040617
Plug, Vent 5 PSI
1
7
040616
Bushing, Vent 1/4” NPT to 1/8” NPT
8
040652
Plug, 1/8-27 NPT Schd w/3m
1
Drain Plug
1
9
045878
Seal, TC-1.00-1.50-.187 Polyacrylate
2
10
040647
Bearing Cup, TMKN L44620
4
11
040648
Bearing Cone, TMKN L44643
4
12
046934
Ring, Superior GB Retaining R100
1
13
040645
Stub, Shaft/Gear
1
14
040646
Cross, Shaft/Gear
1
NOTE: Use 6 oz. of Mobilube Synthetic 75W90 to refill the gearbox.
3-8
Lastec//090616
Drive System
Drive System
Superior Gearbox
3
100_058B
Drive System
Lastec//090616
3-9
3
3.5
REF
Drive System
PTO 049617
PTO 049617
PART #
DESCRIPTION
COMMENTS
PTO Shaft Assembly, Deere 26 In
4-Lobe cross section
QTY.
1
049617
2
049652
Kit, Cross Bearing S1 22x54 Zerk In Cap
2
3
049648
Yoke, Outer Self Lock Deere 15 Spline
1
4
049654
Yoke, Outer Pin Lock Mower 20 Spline Hrd
1
5
049650
Ring, Bearing B&P Outer Shield Cone Fml
1
6
049651
Ring, Bearing B&P Outer Shield Cone Male
1
7
049643
Cone, B&P Outer Shield
2
8
049633
Sleeve, Outer Shield 049616 049617 Femal
1
9
029615
Decal, Bondioli Sleeve
1
10
049659
Decal, Danger Bondioli Outer Drive Tube
1
11
049634
Sleeve, Inner Shield 049616 049617 Male
1
12
049656
13
F05004-177
14
F05010-167
Nut, M4-.7 Prev Torq Znc
metric
1
15
028724
Fitting, Straight Metric Grease
metric
2
Screw, B&P Outer Shield Cone
Screw, M4-.7x65 SHC Zinc
1
6
metric
1
Service and CE Parts
PART #
DESCRIPTION
COMMENTS
QTY.
1
049652
Kit, Cross Bearing S1 22x54 Zerk In Cap
049628
Kit, Safety Shield 049616 049617 Complete
P256
PTO Shield Retaining Chain, Bondiol
CE Compliance
2
019350
PTO CE Label Kit, Bondioli
CE Compliance
1
1
NOTE: Half Shafts are not sold separately.
3-10
Lastec//090616
Drive System
Drive System
PTO 049617
3
100_061B
Drive System
Lastec//090616
3-11
4
SECTION 4 MOWER DECKS
Mower//090616
4-1
4
4.1
REF
Mower Decks
Deck 1 Hardware
Deck 1 Hardware
PART #
QTY.
F05010-121
Nut, 5/16-18 Nylon Locking Jam
3
3
046293
Washer, Throttle Friction
2
4
061836
Cover, #1 Deck
1
5
F81033-6
Nut, 10mm x 1.25 Nylon
6
046465
Dampener, Hand Control
7
F05010-192
Nut, M10-1.25 Free Zinc Plate
Metric
1
8
F81003-25
Bolt, M10-1.25x30mm HHFT 8.8
Metric
1
2
1
Metric
1
1
9
F05010-10
Nut, 3/8-16 Hex Nylock
1
10
F05008-74
2
11
F05009-20
2
12
F05010-185
Nut, 5/8-11 FlexLoc
2
13
F05010-8
Nut, 1/2-13 Nyl Hex Lock
2
059082
Deflector Assembly, Grass
1
14
059081
Deflector Plate, #5 Deck Grass
1
15
F05007-165
Bolt, 3/8-16x1 Carriage
2
16
F05010-222
059126
2
COMMENTS
1
067043
17
1
DESCRIPTION
Cover, 1 3/8”” Hole Plug
1
2
Door Assembly, #1 Deck Trap
1
1
F05006-102
3
18
F05011-3
3
19
059125
Clamp Plate, #1 Deck Trap Door
1
20
059096
Door, #1 Deck Trap
1
21
041630
1
22
F05009-28
Bolt, 5/8-11 x 4” Hex Head Grade 5
1
23
027013
Wheel, 5-5/8" Hole Anti-Scalp
1
24
F05010-82
Nut, 5/8-11 Jam
2
25
P107
1
Replaced 043217 1-1/4” Hole Plug Cover. Deck cover was redesigned to accept 1-3/8” hole plug cover (7/11).
059126 replaced 064555 including (4) F05006-102 5/16-18 x 3/4” Hex Head Bolt, (4) F05011-3 3/8” Flat Washer, 064557 #1 Deck
Trap Door Clamp Plate and 064556 #1 Deck Trap Door (Serial #49311013 and later). Previously, 064555 replaced 059126 #1 Deck
Trap Door Assembly (9/11).
4-2
Lastec//090616
Mower Decks
Mower Decks
Deck 1 Hardware
4
100_072E
Mower Decks
Lastec//090616
4-3
4
4.2
REF
Mower Decks
Double Pulley Spindle (Serial #46331112 and later)
PART #
067695
1
DESCRIPTION
Spindle Assembly, ZT 21” D6.3-6.3
COMMENTS
QTY.
Non-saleable item. Parts must be
purchased separately.
1
1
P107 1
1
2
0456771
Bolt, Spindle Single Pulley
3
F05011-97
Washer, 1/2” Plain Belleville
1
Maximum Torque: 57 ft-lbs
1
4
028080
Key, 1/4” Square x 1 1/2” Long
1
5
067688
Sheave, Double - Mower Deck
1
6
F05007-78
7
067696
Spindle Assembly, ZT Cast
8
F05010-222
Nut, 3/8-16 Flanged Hex Nyloc
4
9
P128
Blade, 21” x 2 1/2” x 1/4” High Lift
1
P246
Blade, 21” Low-Lift
Optional
1
P322
Blade, 21” Gator Mulching
Optional
1
Optional
1
063265
Blade, 21” x 2 1/2” x 1/8” Low-Lift Ultra
10
029889
Washer, 2 1/2” x 11/16” x 3/16” Nylon
11
F05011-89
Washer, 2 1/2” OD x 5/8” ID x 3/16” Std Flat
12
F05009-95
13
048898
Blade Disc, Anti-Scalp
4
1
1
Remove to install Anti-Scalp
Blade Disc
1
Torque Value: 75 ft-lbs
1
Optional part. Remove Item 11 to
install Anti-Scalp Blade Disc
1
For service order 067354 Spindle Bolt 1 1/4” Service Kit including (1) P107 1/4-28 Straight Grease Fitting and (1) 045677 Spindle
Single Pulley Bolt.
4-4
Lastec//090616
Mower Decks
Mower Decks
4
100_190
Mower Decks
Lastec//090616
4-5
4
4.3
Mower Decks
Spindle Housing, Decks 1, 2, 4 and 5 (Serial #46331112 and later)
REF
PART #
COMMENTS

067696
Spindle Assembly, Center w/Stiffener
Non-saleable item. Parts must
be purchased separately.
QTY.
1
P11035
Bearing, 6206-2NSE
2
P105
O-Ring, 2 1/2” ID x 2 3/4” OD
4
3
072511
Spacer, Bearing Housing
1
4
067999
Spindle Housing, ZT- Common Core
1
5
067686
Spacer, Spindle Bearing Housing
1
6
034947
Washer, 1.50” x 1.185” x 16Ga
1
7
034948
Washer, 2.435” x 1.185” x 11Ga
1
8
067687
Shaft, Blade Spindle ZT Cast
1
1
3
Concerning Nachi Sealed Bearings:
One of the most common misconceptions that cause a high number of bearing failures is that a
bearing needs to be completely packed full. Many people have been taught; the more grease, the
better. We have even heard of cases where people do not feel bearing manufacturers use
enough grease in sealed and shielded ball bearings, so they remove one seal or shield and
pack the bearing with more grease. These misconceptions are completely false. Over lubricating the bearings forces the motor to work harder.





4-6
Nachi standard grease fill for sealed and shielded ball bearings is 20% to 30% full
Too much grease can cause excess friction, thereby overheating the bearing and causing
remature failure.
Only a small of grease is required to lubricate a bearing in motion.
When a bearing is in motion, most of the grease is pushed to the side (channeling) leaving a
thin film of oil between the raceways and rolling elements.
When using open bearings, pack the bearing as follows:
Lastec//090616
Mower Decks
Mower Decks
4
100_188
Mower Decks
Lastec//090616
4-7
4
4.4
REF
Mower Decks
Double Pulley Spindle, Decks 1, 5 (Prior to Serial #46331112)
PART #
049892
COMMENTS
QTY.
1
1
P107 1
2
045677
Bolt, Spindle Single Pulley
3
F05011-97
1
4
027053
Key, 1/4” x 2 1/2”
1
5
040049
Sheave, Double - 2561 Mower
1
6
046273
Washer, 1/4” x 1.47” x 1.01”
1
7
F05007-85
Bolt, 3/8-16 x 1 1/2” Carriage Grade 5
8
044862
Plate, Deck Reinforcing
048183
043246
10
F05010-10
4
11
P128
1
P246
Optional
1
P322
Optional
1
Optional
1
9
1
DESCRIPTION
Spindle Assembly, 2861AGC Double Sheave
1
1
4
Serial # 2940906 and later
2
Serial # 2930806 and prior
1
1
063265
12
029889
Washer, 2 1/2” x 11/16” x 3/16” Nylon
13
F05011-89
Washer, 2 1/2” OD x 5/8” ID x 3/16” Std Flat Znc
Serial # 2940906 and later.
Blade Disc
1
F05011-27
1
14
F05009-95
15
048898
1
1
Optional part. Remove Item 13
to install Anti-Scalp Blade Disc
1
P107 replaced P04107 3/16” x 3/16” Straight Grease Fitting to improve durability (Serial #41071011 and later).
4-8
Lastec//090616
Mower Decks
Mower Decks
4
LT0033
Mower Decks
Lastec//090616
4-9
4
4.5
Mower Decks
Spindle Housing (Prior to Serial #46331112)
REF
PART #
COMMENTS

043246
QTY.
1
1
F05006-140
Added after serial # 33351208
3
2
F05006-93
Bolt, 5/16-18 x 1 1/4” Hex Head Full Thread Gr5
3 deleted after serial #
33341208
3
3
F05011-13
3 deleted after serial #
33341208
3
4
034921
1
5
034969
Seal, 2561 Spindle
1
6
034951
Collar, Spindle Top
7
062999
O-Ring, Spindle
8
P11035
Bearing, 6206-2NSE
3
9
034945
Housing, Spindle
1
10
F05012-64
Pin, 1/8” x 1/2” Roll
11
F05010-58
Nut, 5/16-18 Nylon Lock Hex
12
034950
Spacer, Spindle Bearing
1
13
F04254-45
O-Ring, 2 7/16" ID x 3/16" Diameter
2
14
034947
Washer, 1.50” x 1.185” x 16Ga
1
15
034948
Washer, 2.435” x 1.185” x 11Ga
1
16
043245
Shaft, Center Blade Spindle
1
17
IS-0387
Instruction Sheet, 1-12 Spindle
1
1
1
1
3
Concerning Nachi Sealed Bearings:
One of the most common misconceptions that cause a high number of bearing failures is that a
bearing needs to be completely packed full. Many people have been taught; the more grease, the
better. We have even heard of cases where people do not feel bearing manufacturers use
enough grease in sealed and shielded ball bearings, so they remove one seal or shield and
pack the bearing with more grease. These misconceptions are completely false. Over lubricating the bearings forces the motor to work harder.





4-10
remature failure.
When using open bearings, pack the bearing as follows:
Lastec//090616
Mower Decks
Mower Decks
4
LT0024B
Mower Decks
Lastec//090616
4-11
4
4.6
REF
Mower Decks
Deck 1 Idler Assembly
PART #
056565
DESCRIPTION
Idler Assembly, 521
COMMENTS
QTY.
1
1
F05008-10
2
2
062051
Washer, Water Shed Pulley
2
045295
Pulley Assembly, 5” OD Idler, Flat
1
3
F04254-12
Ring, 62mm IR Din #472 Retaining
2
4
P103
Bearing, Spindle Top 6305 RS
1
5
045296
Pulley, 5” OD Idler, Flat
1
6
045297
7
056566
Weldment, 521E Idler Plate
1
8
P123
1
9
F05010-127
2
10
029842
2
11
F05010-225
1
12
F05011-77
1
105249
Pulley Assembly, 5In OD Idler, V Groove Tall
1
Boss, Idler Pulley Standoff
1
13
F04254-12
2
14
P103
1
15
045270
Pulley, 5” OD Idler, V Groove
1
16
045297
1
17
F05006-76
Bolt, 5/16-18 x 1 1/2” Hex Head Full Thread Grade 5
1
18
F05010-17
Nut, 5/16-18 Hex
1
19
F05010-221
1
20
P410
1
21
F05011-68
Washer, 1/2” Standard Flat
2
4-12
Lastec//090616
Mower Decks
Mower Decks
4
100_009D
Mower Decks
Lastec//090616
4-13
4
4.7
REF
Mower Decks
Anti-Scalp Roller Assembly (Optional)
PART #
067135
1
1
DESCRIPTION
COMMENTS
Anti-Scalp Roller Assembly, 3300
Optional
Axle Rod, 3300 Anti-Scalp Roller
QTY.
1
1
067142
1
2
067136
Bracket Weldment, 3300 Anti-Scalp
1
3
P438
Wheel, Anti-Scalp 6” x 3.25” x 3/4” ID
1
4
F05011-9
2
5
F05008-71
Bolt, 1/2-13 x 1” Hex Head Full Thread
2
6
F05007-165
3
7
F05010-10
3
8
F05011-3
3
Available with Serial # 44760712 and later. Units prior to Serial # 44760712 need to have three (3) 13/32” holes drilled in the deck
#1 pan wrap (see Product Bulletin PB-0335 for more information).
4-14
Lastec//090616
Mower Decks
Mower Decks
4
100_176C
Mower Decks
Lastec//090616
4-15
4
4.8
REF
Mower Decks
Deck 2 Hardware
Deck 2 Hardware
PART #
DESCRIPTION
COMMENTS
1
F81033-6
Metric
QTY.
2
F05010-192
Metric
1
3
F05004-277
Bolt, M10-1.25 x 40mm Hex Head Grade 8.8
Metric
1
4
F05009-35
4
5
049870
Bushing, Urethane Pivot
4
6
F05011-40
2
7
F05010-185
Nut, 5/8-11 FlexLoc
4
8
064257
Hinge Weldment, #2 Deck Black
1
059168
Hinge Weldment, #2 Deck
Serial #36420310 and prior
1
1
9
F05008-74
1
10
F05011-9
1
11
059078
Tube, Belt Keeper
1
12
F05009-41
1
13
061855
Spacer, Bearing
1
14
061856
Bearing, 1.25” x 2.25” x .50”
1
15
F05011-5
1
16
F05010-96
Nut, 5/8-11 Jam Nyl Lock
3
17
F05009-20
1
18
F05010-8
2
19
F05008-23
2
20
062149
Sleeve, .875” x 1.14” Lg Bushing
2
21
062115
Bushing, .875” Bearing
2
22
057505
Bolt, 5/16-18 x 2” Elevator
1
23
F05011-13
1
24
F05010-17
Nut, 5/16-18 Hex
1
25
105292
Wheel, 5 In Dia Anti-Scalp 5/8 Hole
26
F05009-140
Bolt, 5/8-11x3-1/4 FT HH
NOTE: 100EFD Only: Removed 064564 Baffle Assembly, #2 Blowout (available since 9/11) including (1) 064565 Baffle
Weldment, #2 Blowout, (2) F05010-121 Nut, 5/16-18 Nylon Locking Jam and (2) F05006-86 Bolt, 5/16-18 x 3/4” Carriage
(Serial #570206016 and later).
CAUTION: Bolts holding urethane bushings must remain tight. Equipment damage may
occur.
4-16
Lastec//090616
Mower Decks
Mower Decks
Deck 2 Hardware
4
100_068-1E
Mower Decks
Lastec//090616
4-17
4
4.9
REF
Mower Decks
Deck 2 Covers
Deck 2 Covers
PART #
067792
DESCRIPTION
1
COMMENTS
QTY.
Cover Assembly, Left Transition
1
1
059709
Cover, #1 Deck Sliding
1
2
059083
Bumper, Rubber Button
4
3
061642
Cover, #2 deck Right Sliding
1
4
F05010-221
4
5
F05015-36
Screw, #10 x 1/2” Long AB Thrd Slot Hex Head
8
6
058597
Hinge, 521E Sliding Cover
1
7
058844
Pivot Bearing, Cover
2
Bolt, 5/16-18x1/2 Grade 5 FHCS Serrated
4
8
F05006-162
061639
Cover Assembly, #2 Deck
1
9
061640
Cover Plate, Left
1
10
F05006-162
6
11
067043 2
1
12
061838
Guard Weldment, #2 Front
1
13
061847
Guard Weldment, #2 Rear
1
14
059083
064558
3
4
Door Assembly, #2 Trap
1
15
F05006-160
4
16
064560
1
17
059797
Door, #2 Deck Trap
1
18
F05011-50
Washer, 5/16” x 1 1/4” Fender
2
19
067376
Door, #2/4 Deck Trap
1
064661
Door Assembly, #2 Trap
Added (9/11)
1
20
F05006-160
2
21
064663
1
22
064662
Door, #2 Deck Trap
1
1
067792 replaced 061641 Left Transition Cover Assembly (11/12). 061641 included 067952 4520 #1 Deck Sliding Cover that replaced
059709 #1 Deck Sliding Cover with Serial #45220612 and used (1) 028235 Seat/Hood Rubber Bumper Pad and (1) F05010-69
1/4-20 Nylock Nut.
2 Replaced 043217 1-1/4” Hole Plug Cover. Deck cover was redesigned to accept 1-3/8” hole plug cover (7/11).
3
064558 modified to improve fit (2/12). 064558 replaced 061603 #2 Trap Door Assembly including (3) F05006-27 5/16-18 x 1” Hex
Head Bolt, (3) F05011-13 5/16” Split Lock Washer, 058841 #2 Deck Trap Door Clamp Plate and 059797 #2 Deck Trap Door (9/11).
4-18
Lastec//090616
Mower Decks
Mower Decks
Deck 2 Covers
4
100_034-2G
Mower Decks
Lastec//090616
4-19
4
Mower Decks
4.10 Double Pulley Spindle (Serial #46331112 and later)
REF
PART #
072514
1
DESCRIPTION
COMMENTS
Spindle Assembly, ZT 21” D6.3-6.3 Spacer
QTY.
1
1
P107 1
1
2
0591421
Bolt, Spindle Pulley 1/2-13 x 1 3/4”
3
F05011-97
1
4
028080
Key, 1/4” Square x 1-1/2” Long
1
5
067688
Sheave, Double - Mower Deck
1
6
043249
Washer, 3/8” x 1.5”x1.01”
1
7
F05007-78
Bolt, 3/8-16 x 1 1/2” Hex Head Gr5
4
1
8
067696
Spindle Assembly, ZT Cast
9
F05010-222
10
P128
P246
Optional
1
P322
Optional
1
063265
Optional
1
1
4
1
11
029889
Washer, 2-1/2” x 11/16” x 3/16” Nylon
12
F05011-89
Washer,2 1/2” ODx5/8” IDx3/16” Std Flat Znc
Blade Disc
1
13
F05009-95
1
14
048898
1
1
For service order 067355 Spindle Bolt 1 3/4” Service Kit including (1) P107 1/4-28 Straight Grease Fitting and (1) 059142 Spindle
Pulley 1/2-13 x 1 3/4” Bolt.
4-20
Lastec//090616
Mower Decks
Mower Decks
4
100_189
Mower Decks
Lastec//090616
4-21
4
Mower Decks
4.11 Double Pulley Spindle, Decks 2, 4 (Prior to Serial #46331112)
REF
PART #
058662
1
DESCRIPTION
COMMENTS
Spindle Assembly, 521E/Z
1
P107 1
2
059142
Bolt, Spindle Pulley 1/2-13 x 1 3/4”
QTY.
1
1
1
3
F05011-97
1
4
027053
Key, 1/4” x 2-1/2”
1
5
040049
Sheave, Double - 2561 Mower
1
6
043249
Washer, 3/8” x 1.5”x1.01”
1
7
046273
Washer, 1/4” x 1.47” x 1.01”
1
8
F05007-85
Bolt, 3/8-16 x 1 1/2” Carriage Gr5
4
9
044862
10
043246
11
F05010-10
4
12
P128
1
P246
Optional
1
P322
Optional
1
Optional
1
2
1
063265
13
029889
Washer, 2-1/2” x 11/16” x 3/16” Nylon
14
F05011-89
Washer,2 1/2” ODx5/8” IDx3/16” Std Flat Znc
Blade Disc
15
F05009-95
1
16
048898
1
1
1
P107 replaced P04107 3/16” x 3/16” Straight Grease Fitting to improve durability (Serial #41071011 and later).
4-22
Lastec//090616
Mower Decks
Mower Decks
4
100_018
Mower Decks
Lastec//090616
4-23
4
Mower Decks
Deck 3 Hardware
4.12 Deck 3 Hardware
REF
PART #
DESCRIPTION
F05009-66
2
F05011-9
1
3
062051
1
045271
1
COMMENTS
QTY.
1
Pulley Assembly, 5” OD Idler, V Groove
1
4
F04254-12
2
5
P103
1
6
045270
1
7
045272
1
Spacer, 3/8” Deck Lift 425 Yzc
1
F05011-2
1
10
F05010-185
Nut, 5/8-11 FlexLoc
4
11
049870
8
12
F05011-40
4
13
F05009-35
4
064568 2
Door Assembly #3 Deck Trap
1
8
072105
9
1
14
F05006-160
3
15
064570
1
16
064569
Door, 521E/Z #3 Deck Trap
1
2
F05010-35
Nut, 1/2-13 Hex
2
19
062149 4
Sleeve, .875” x 1.14” Long Bushing
4
20
0621154
4
21
F04254-46
Ring, 3/4” External - External
1
22
F05011-77
067087
17
F05010-8
18
3
1
Added (9/11)
1
23
F05006-102
2
24
F05011-13
2
25
067089
2
26
067088
Door, 521E/Z #3 Deck Trap
1
27
F05010-127
Nut, 1/2-13 Half Nyloc
8
28
018751
Washer, Motor Mount
4
29
059299
Spring, Counter Balance
4
30
F05008-33
4
31
072677
Plate Weldment, Deck Belt Guard
1
32
F05011-68
1
33
061881
Mulching Plate, #3
1
34
F05006-90
3
35
F05010-221
3
4-24
Lastec//090616
Mower Decks
Mower Decks
Deck 3 Hardware
4
1
Added (1) 072105, (1) 072701, (1) 072677, (1) F05008-88 and (1) F05011-68; removed (1) 019535 3/8” Deck Lift 425 Spacer, (1)
F05010-8 and (2) F05011-2 (Serial #48920813 and later).
2 Replaced 058848 #3 Trap Door Assembly including (2) F05006-27 5/16-18 x 1” Hex Head Bolt, (2) F05011-13 5/16” Split Lock Washer, 058839 #3 Deck Trap Door Clamp Plate and 058812 521E/Z #3 Deck Trap Door (9/11).
3 (1) F05010-8 replaced 072701 1/2-13 x 1-3/4 Coupling Nut, removed (1) F05008-88 1/2-13 x 1 3/4” Hex Head Grade 5 Full Thread
Bolt and (1) F05011-68 1/2” Standard Flat Washer (10/13).
4
Replaced (049276) Bushing, Urethane Bearing Inner and (049277) Bearing Half, Urethane Bushed in models with serial # 34990809
and later. See Product Bulletin PB-0262 for more information.
occur.
100_070H
Mower Decks
Lastec//090616
4-25
4
Mower Decks
Triple Pulley Spindle, Deck 3 (Serial #46331112 to #55371015)
4.13 Triple Pulley Spindle, Deck 3 (Serial #46331112 to #55371015)
REF
PART #
072621
1
DESCRIPTION
Spindle Assembly, EF 21" D5.25-5.25-6.3
P107
COMMENTS
QTY.
1
1
1
2
059142
Bolt, Spindle Pulley 1/2-13x1-3/4
3
F05011-97
1
4
027053
Key, 1/4” x 2-1/2”
1
5
072515
Sheave, Triple - D5.3-5.3-6.3 B1.00 Ca
1
6
F05007-78
7
072517
Spindle Assembly, EF Cast
8
F05010-222
4
9
P128
1
P246
Optional
1
P322
Optional
1
Optional
1
063265
10
029889
Washer, 2 1/2” x 11/16” x 3/16” Nylon
11
F05011-89
12
F05009-95
13
048898
4-26
Lastec//090616
4
1
1
Blade Disc
1
1
1
Mower Decks
Mower Decks
Triple Pulley Spindle, Deck 3 (Serial #46331112 to #55371015)
4
100_207
Mower Decks
Lastec//090616
4-27
4
Mower Decks
Spindle Housings (Serial ##46331112 to #55371015)
4.14 Spindle Housings (Serial ##46331112 to #55371015)
REF
PART #
DESCRIPTION
COMMENTS
072517
Spindle Assembly, EF Cast
QTY.
1
1
P11035
Bearing, 6206-2NSE
3
2
P105
O-Ring, 2 1/2” ID x 2 3/4” OD
4
3
072511
Spacer, Bearing Housing
1
4
067999
Spindle Housing, ZT- Common Core
1
5
067686
Spacer, Spindle Bearing Housing
1
6
034947
Washer, 1.50” x 1.185” x 16Ga
1
7
034948
Washer, 2.435” x 1.185” x 11Ga
1
8
072518
Shaft, Blade Spindle EF Cast
1
Concerning Sealed Bearings:
One of the most common misconceptions that cause a high number of bearing failures is
that a bearing needs to be completely packed full. Many people have been taught; the
more grease, the better. We have even heard of cases where people do not feel bearing manufacturers use enough grease in sealed and shielded ball bearings, so they
remove one seal or shield and pack the bearing with more grease. These misconceptions are completely false. Over lubricating the bearings forces the motor to work
harder.




4-28
remature failure.
Lastec//090616
Mower Decks
Mower Decks
Spindle Housings (Serial ##46331112 to #55371015)
4
120_096
Mower Decks
Lastec//090616
4-29
4
Mower Decks
Triple Pulley Spindle (Prior to Serial #46331112)
4.15 Triple Pulley Spindle (Prior to Serial #46331112)
REF
PART #
DESCRIPTION
COMMENTS
058590
Spindle Assembly, 521E Deck 3
1
P107 1
2
059142
Bolt, Spindle Pulley 1/2-13x1-3/4
QTY.
1
1
1
3
F05011-97
1
4
027053
Key, 1/4” x 2-1/2”
1
5
056525
Sheave, Triple-100 Outfront Mower
1
6
046273
Washer, 1/4” x 1.47” x 1.01
1
7
F05007-85
Bolt, 3/8-16” x 1 1/2” Carriage Gr5
4
8
044862
2
9
058591
Spindle Assembly, 521E Center
10
F05010-10
11
P128
P246
Optional
1
P322
Optional
1
063265
Optional
1
12
029889
Washer, 2-1/2” x 11/16” x 3/16” Nylon
13
F05011-89
Blade Disc
1
14
F05009-95
Bolt, 5/8-18 x 1 3/4” Hex Head Grade 5 Znc
1
15
048898
1
1 P107
4-30
1
4
1
1
replaced P04107 3/16” x 3/16” Straight Grease Fitting to improve durability (Serial #41071011 and later).
Lastec//090616
Mower Decks
Mower Decks
Triple Pulley Spindle (Prior to Serial #46331112)
4
100_019
Mower Decks
Lastec//090616
4-31
4
Mower Decks
Spindle Housings (Prior to Serial #46331112)
4.16 Spindle Housings (Prior to Serial #46331112)
REF
PART #
058591
DESCRIPTION
Spindle Assembly, 521E Center
COMMENTS
QTY.
1
1
F05006-140
3
2
F05006-93
3
3
F05011-13
6
4
034921
1
5
034969
Seal, 2561 Spindle
1
6
034951
Collar, Spindle Top
7
062999
O-Ring, Spindle
8
P11035
Bearing, 6206-2NSE
3
9
034945
Housing, Spindle
1
10
F05012-64
Pin, 1/8” x 1/2” Roll
1
11
F05010-58
Nut, 5/16-18 Nylok Hex
3
12
034950
Spacer, Spindle Bearing
1
13
F04254-45
O-Ring, 2-7/16" ID x 3/16" Diameter
2
14
034947
Washer, 1.50” x 1.185” x 16Ga
1
15
034948
Washer, 2.435” x 1.185” x 11Ga
1
16
058283
Shaft, Extended Center Blade Spindle
1
1
1
Concerning Sealed Bearings:
One of the most common misconceptions that cause a high number of bearing failures is
that a bearing needs to be completely packed full. Many people have been taught; the
more grease, the better. We have even heard of cases where people do not feel bearing manufacturers use enough grease in sealed and shielded ball bearings, so they
remove one seal or shield and pack the bearing with more grease. These misconceptions are completely false. Over lubricating the bearings forces the motor to work
harder.




4-32
remature failure.
Lastec//090616
Mower Decks
Mower Decks
Spindle Housings (Prior to Serial #46331112)
4
100_005
Mower Decks
Lastec//090616
4-33
4
Mower Decks
Deck Drive Idler (Serial #48920813 and later)
4.17 Deck Drive Idler (Serial #48920813 and later)
REF
PART #
072741
1
DESCRIPTION
1
F05008-33
COMMENTS
Idler Assembly, 100EF Deck Drive
QTY.
1
1
2
F05011-68
4
3
072722
Spring, 1 1/2” OD x 8 1/2” x .195” Double Rate
1
4
F05010-35
Nut, 1/2-13 Hex
1
5
F05010-127
Nut, 1/2-13 Hex Half Nylon Lock
2
6
029842
2
7
072742
Idler Weldment, 100EF Main Deck
1
8
P294
Fitting, 1/4-28 45 Deg Grease
1
045295
1
9
045297
1
10
F04254-12
1
11
P103
1
12
045296
1
13
F05008-76
1
14
072740
Keeper, Deck Idler Belt ER
1
15
F05005-15
Bolt, 1/4-20 x 1/2” Hex Head
2
16
F05011-14
2
1 (1)
072722 replaced (2) 034982 1 1/2” OD x 8 1/2” x .195 Spring, (1) F05008-33 replaced (1) F05008-185 1/2-13 x 2 3/4” Hex Head
Grade 5 Bolt, removed (1) F05010-35 and (1) F05011-68 (10/13).
4-34
Lastec//090616
Mower Decks
Mower Decks
Deck Drive Idler (Serial #48920813 and later)
4
100_200C
Mower Decks
Lastec//090616
4-35
4
Mower Decks
Deck Drive Idler (Prior to Serial #48920813)
4.18 Deck Drive Idler (Prior to Serial #48920813)
REF
PART #
061820
DESCRIPTION
COMMENTS
Idler Assembly, 100EFD & NH Deck Drive
QTY
1
1
F05008-33
1
2
F05011-68
2
3
034982
Spring, 1-1/2OD x 8-1/2 x .195
1
4
F05010-35
Nut, 1/2-13 Hex
1
5
F05010-127
Nut, 1/2-13 Hex Half Nylon Lock
2
6
029842
Bushing, 3/4 ID x 1 OD x 1 Oil
2
7
057175
Weldment, 521E Main Deck Idler
1
8
P294
1
045295
Pulley Assy, 5in OD Idler, Flat
9
Includes items 9 through 12
1
045297
1
10
F04254-12
2
11
P103
1
12
045296
Pulley, 5 OD Idler, Flat
043367
Pulley, 5” OD Idler
13
4-36
F05008-76
1
Lastec//090616
1
1
Mower Decks
Mower Decks
Deck Drive Idler (Prior to Serial #48920813)
4
100_004
Mower Decks
Lastec//090616
4-37
4
Mower Decks
Grass Discharge, Deck 3
4.19 Grass Discharge, Deck 3
REF
PART #
DESCRIPTION
061637
Chute Assembly, #3 Deck Rubber
COMMENTS
QTY.
1
1
F05010-121
4
2
F05011-17
4
3
061636
Clamp Plate, #3 Chute
1
4
061635
Rubber Chute, #3 Deck
1
5
F05011-50
1
6
F05006-27
1
7
059138
Clamp Plate, Rubber Chute
1
8
F05006-90
5
059082
1
059081
1
10
F05007-165
2
11
F05010-222
2
12
061881
Mulching Plate, #3
1
13
F05006-90
3
14
F05010-221
3
15
072279
Baffle Plate, 100" #1 & 3 Deck
1
16
F05007-165
3
17
F05010-222
3
9
4-38
Lastec//090616
Mower Decks
Mower Decks
Grass Discharge, Deck 3
4
100_031-1C
Mower Decks
Lastec//090616
4-39
4
Mower Decks
Deck 4 Hardware
REF
PART #
DESCRIPTION
COMMENTS
1
F81033-6
Metric
QTY.
1
2
F05010-192
Metric
1
3
F05004-277
Bolt, M10-1.25 x 40mm Hex Head Grade 8.8
Metric
1
4
F05009-35
3
5
049870
4
6
F05011-40
2
7
F05010-185
Nut, 5/8-11 FlexLoc
4
8
064262
Hinge Weldment, #4 Deck Black
1
059170
Hinge Weldment, #4 Deck
Serial #36420310 and prior
1
9
F05008-23
2
10
F05011-9
1
11
059078
Tube, Belt Keeper
1
12
F05009-41
1
13
061855
Spacer, Bearing
1
14
061856
Bearing, 1.25” x 2.25” x .50”
1
15
F05011-5
1
16
F05010-96
3
17
F05009-20
1
18
F05010-8
2
19
F05008-74
1
20
062149
Sleeve, .875” x 1.14” Lg Bushing
2
21
062115
2
22
057505
Bolt, 5/16-18 x 2” Elevator
1
23
F05011-13
1
24
F05010-17
Nut, 5/16-18 Hex
1
25
105292
Wheel, 5 In Dia Anti-Scalp 5/8 Hole
1
26
F05009-140
Bolt, 5/8-11x3-1/4 FT HH
1
occur.
4-40
Lastec//090616
Mower Decks
Mower Decks
Deck 4 Hardware
4
100_069-1C
Mower Decks
Lastec//090616
4-41
4
Mower Decks
Deck 4 Covers
4.21 Deck 4 Covers
REF
PART #
DESCRIPTION
061646
Cover Assembly, #4 Pivoting
COMMENTS
QTY.
1
1
059712
1
2
059083
4
3
061647
1
4
F05010-221
4
5
F05015-36
Screw, #10 x 1/2” Long AB Thrd Slot Hex Head
8
6
058597
Hinge, 521E Sliding Cover
1
7
058844
Pivot Bearing, Cover
2
8
F05006-162
4
061643
Cover Assembly, #4 Deck Pivoting
9
061644
10
F05006-162
1
Cover Plate, Right
1
6
1
11
067043
12
061848
Guard Weldment, #4 Rear
1
13
061839
Guard Weldment, #4 Front
1
14
059083
4
1
064574 2
1
15
F05006-160
4
16
064576
Clamp Plate, #4 Trap Door
1
17
064575
Door, #4 Deck Trap
1
059082
1
18
059081
1
19
F05007-165
2
20
F05010-222
064577
3
2
Added (9/11)
1
F05006-160
2
22
F05011-50
2
23
067376
Door, #2/4 Deck Trap
1
21
064580
Baffle Assembly, #4 Blowout
Added (9/11) 4
1
24
064581
Baffle Weldment, #4 Blowout
1
25
F05006-86
Bolt, 5/16-18 x 3/4” Carriage
2
26
F05010-121
2
1
Replaced 043217 1-1/4” Hole Plug Cover. Deck cover was redesigned to accept 1-3/8” hole plug cover (7/11).
Replaced 059180 #4 Trap Door Assembly including (3) F05006-102 5/16-18 x 3/4” Hex Head Bolt, (3) F05011-13 5/16” Split Lock
Washer, 059179 #4 Deck Trap Door Clamp Plate and 059178 #4 Deck Trap Door (Serial #44470712 and later).
3
067376 replaced 064578 #4 Deck Trap Door, removed 064579 Clamp Plate and added (2) F05011-50 Washers (Serial #44470712
and later).
4 No longer used on 100EFD (Serial #57020616 and later).
2
4-42
Lastec//090616
Mower Decks
Mower Decks
Deck 4 Covers
4
100_032-2G
Mower Decks
Lastec//090616
4-43
4
Mower Decks
Deck 5 Hardware
REF
PART #
DESCRIPTION
COMMENTS
QTY.
1
3
F05011-17
1
046293
Washer, Throttle Friction
2
F05010-58
Nut, 5/16-18 Nylock Hex
1
061844
Cover Weldment, #5
1
7
F81003-25
Bolt, M10-1.25 x 30mm HHFT 8.8
metric
1
8
F05010-192
metric
1
metric
1
1
067043
2
F05010-121
3
4
5
6
1
9
046465
Dampener, Hand Control
10
F81033-6
1
11
F05008-74
2
12
F05009-20
2
13
F05010-8
2
14
F05010-185
Nut, 5/8-11 FlexLoc
2
059082
1
15
059081
1
16
F05007-165
2
17
F05010-222
2
18
049892
Spindle Assembly, 2861AGC Dbl Sheave
1
19
057111
Idler Assembly, 521EH High
1
20
061616
Chute Assembly, #5 Deck Grass
1
21
041630
22
057189
Wheel Yoke Assembly, 521E 9”
23
P107
1
1
1
24
F05009-28
1
25
027013
Wheel, 5-5/8" Hole Anti-Scalp
1
26
F05010-82
Nut, 5/8-11 Jam
3
1 Replaced
4-44
043217 1-1/4” Hole Plug Cover. Deck cover was redesigned to accept 1-3/8” hole plug cover (7/11).
Lastec//090616
Mower Decks
Mower Decks
Deck 5 Hardware
4
100_073B
Mower Decks
Lastec//090616
4-45
4
Mower Decks
Deck 5 Idler
4.23 Deck 5 Idler
REF
PART #
057111
DESCRIPTION
Idler Assembly, 521EH High
COMMENTS
QTY.
1
1
F05008-10
2
2
062051
2
105249
Pulley Assembly, 5In OD Idler, V Groove Tall
1
3
F04254-12
2
4
P103
1
5
045270
1
6
045297
7
056566
Weldment, 521E Idler Plate
1
8
P123
1
9
F05010-127
2
10
029842
2
11
F05010-122
1
12
F05011-77
1
045295
1
1
13
F04254-12
2
14
P103
1
15
045296
1
16
045297
1
17
F05006-76
1
18
F05010-17
Nut, 5/16-18 Hex
1
19
F05010-221
1
20
P410
1
21
F05011-68
Washer, 1/2 Standard Flat
2
4-46
Lastec//090616
Mower Decks
Mower Decks
Deck 5 Idler
4
100_010C
Mower Decks
Lastec//090616
4-47
4
Mower Decks
Rear Grass Discharge Deck 5
4.24 Rear Grass Discharge Deck 5
REF
PART #
DESCRIPTION
061616
Chute Assembly, #5 Deck Grass
COMMENTS
QTY.
1
1
F05010-221
9
2
F05006-90
5
3
062145
Support Plate, Chute Side
1
4
061615
Chute, #5 Right Rubber Grass
1
5
062118
Support Plate, Chute Top
1
6
061614
Chute Tab, Inside Rubber
1
7
061611
Support Plate, Chute Top
1
8
F05006-141
Bolt, 5/16-18 x 1” BHCS SS
2
9
F05011-50
4
10
F05006-153
Bolt, 5/16-18 x 1-1/2 Carriage Grade 5
2
4-48
Lastec//090616
Mower Decks
Mower Decks
Rear Grass Discharge Deck 5
4
LT0088C
Mower Decks
Lastec//090616
4-49
4
Mower Decks
Mulching Dam Kit
4.25 Mulching Dam Kit
REF
PART #
DESCRIPTION
061882
Dam Kit, 100” Mulching
COMMENTS
QTY.
1
1
061881
Mulching Plate, #3
1
2
F05006-90
6
3
F05011-17
6
4
F05010-121
6
5
061877
Mulching Plate, #5 Deck
1
100” & 120” Side Discharge Configuration:
#5 Deck
Mulching Plate
#3 Deck
Mulching Plate
Side Grass
Chute
Assembly
120_124-1C
100” & 120” Mulch Configuration:
#5 Deck
Mulching Plate
#3 Deck
Mulching Plate
Side
Shield
#5 Deck Rear
Discharge Baffle
4-50
#3 Deck
Baffle Weldment
Lastec//090616
120_124-4
Mower Decks
Mower Decks
Mulching Dam Kit
4
100_036
Mower Decks
Lastec//090616
4-51
4
Mower Decks
Anti-scalp Rollers
4.26 Anti-scalp Rollers
REF
PART #
058428
1
DESCRIPTION
1
COMMENTS
QTY.
Roller Assembly, 521E/Z Anti-Scalp
1
1
1
P05059
Pin, 1/8” x 1 13/16” Safety
2
058589
Frame Weldment, 521E/Z Anti-scalp
1
3
F05012-70
Pin, 1/2” x 1 3/4” Clevis Yzc
1
4
067316
Axle Rod, 3300 Anti-Scalp Roller
1
5
F05009-116
Bolt, 5/8-11 x 2” Grade 5 Carriage
2
6
F05010-185
Nut, 5/8-11 FlexLoc
2
7
F05008-37
2
8
027013
Wheel, Anti-Scalp 5-5/8" hole
2
9
062168
Sleeve, 7/8” OD x 5” Long Bushing
1
10
F05011-5
4
11
F05011-9
2
Replaced 6” anti-scalp rollers with 5” rollers to improve deck adjustment: (2) 027013 replaced (2) P438, (1) 062168 replaced (1)
061651, (1) 067316 replaced (1) 019900, (2) F05011-5 replaced (2) F05011-77, added (2) F05011-5 (Serial #40700811 and later).
4-52
Lastec//090616
Mower Decks
Mower Decks
Anti-scalp Rollers
4
100_023B
Mower Decks
Lastec//090616
4-53
4
Mower Decks
9” x 3.5” Wheel Assembly, Solid (Serial #32841008 and later)
4.27 9” x 3.5” Wheel Assembly, Solid (Serial #32841008 and later)
REF
PART #
DESCRIPTION
056600
Wheel Assembly, 9” x 3.5” Reliance DM
COMMENTS
QTY.
1
1
F05010-17
Nut, 5/16-18 Hex
2
F05011-13
Torque to 145-170 in-lbs
4
4
3
056600-1
Tire, Carlisle Reliance
1
041684
Wheel Hub Assembly, Demountable
1
4
P293
Seal, TRB, 3/4” ID
2
5
P292
Bearing, Tapered Roller, 3/4” ID
2
6
048455
Spacer, 3/4” Wheel Bearing
1
P297
Hub Assembly, Demountable
1
7
048454
Hub, Demountable
1
8
P402
Bearing Race Insert, 3/4" TRB
1
9
072884
062135
Kit, (1) Tire & (2) Yellow Wheel Halves
1
Parts not sold separately
1
NOTE: Wheels are shipped unlubricated from the factory. Insure proper lubrication, bearing preloading, and torque specifications are met. Use Loctite on all bolts. (See Technical
Bulletin SB-0149)
4-54
Lastec//090616
Mower Decks
Mower Decks
9” x 3.5” Wheel Assembly, Solid (Serial #32841008 and later)
4
100_028B
Mower Decks
Lastec//090616
4-55
4
Mower Decks
Wheel Yoke Assembly
4.28 Wheel Yoke Assembly
REF
PART #
DESCRIPTION
059186
COMMENTS
QTY.
1
1
F05010-8
1
2
F05011-2
2
3
059183
Yoke Weldment, Pivoting
1
4
P107
1
5
F05008-23
1
6
F05010-10
1
7
F05011-3
2
8
F05007-73
1
9
029895
Pin, 1/2” Dia x 3 1/2” Snap Spring
1
10
059187
Bushing, Urethane Spring
1
11
057189
4-56
Lastec//090616
1
Mower Decks
Mower Decks
Wheel Yoke Assembly
4
100_006B
Mower Decks
Lastec//090616
4-57
4
Mower Decks
Wheel Yoke Assembly
4.29 Wheel Yoke Assembly
REF
PART #
057189
DESCRIPTION
1
COMMENTS
QTY.
1
1
P116
Washer, 1-1/16” x 1-3/4” x 1/8” Znc
2
2
F05011-116
Washer, 1” ID .06 SS Shim
1
3
F05011-115
Washer, 1” ID .03 SS Shim
1
4
063216
Spring, Wheel Yoke 1-0 Urethane
1
5
T104
Spacer, ID x 1-3/4” OD x 1/4”
2
6
T107
Spacer, 1 3/4” OD x 1 1/16” ID x 1”
3
7
P109
Bushing, 1” ID x 1-1/4” OD x 1-1/4” Flanged
2
8
067076
Pin, 3/8” Dia Lynch Locking
1
9
062400
Yoke Weldment, 3300 9”
1
10
F05009-104
1
11
042898
Spacer, 3/4” Axle Bolt
2
12
056600
13
F05011-62
1
14
F05010-177
1
1
1 (1)
063216 replaced (1) P843 1” ID Wave Washer, (1) 067076 replaced (1) P110 3/8” x 1 5/16” Clevis Pin, removed (1) P111 Kick-out
1” Ring and added (1) F05011-115 and (1) F05011-116 to improve durability (Serial #38861210 and later).
4-58
Lastec//090616
Mower Decks
Mower Decks
Wheel Yoke Assembly
4
100_074
Mower Decks
Lastec//090616
4-59
4
Mower Decks
Deck and 4 Wheel Yoke Assembly
4.30 Deck and 4 Wheel Yoke Assembly
REF
PART #
061628
DESCRIPTION
COMMENTS
Wheel Assembly, Right Rear
Deck 4
QTY
1
1
F05010-127
2
061634
Rod Assembly, Rear Deck Height
1
3
019651
Spacer, 5/16” Thick Deck Height
1
4
061626
Wheel Weldment, Right Deck
1
1
5
F05008-159
1
6
F05009-104
1
7
F05010-177
1
8
F05010-185
Nut, 5/8-11 FlexLoc
2
9
F05009-116
2
10
042898
1
11
056600
12
042898
13
062115 1
4
14
0621491
Sleeve, .875” x 1.14” Long Bushing
4
061627
Wheel Assembly, Left Rear
1
1
Deck
1
15
F05010-127
16
061634
17
019651
1
18
061625
Wheel Weldment, Left Rear
1
19
F05008-159
1
20
F05009-104
1
21
F05010-177
1
22
F05010-185
Nut, 5/8-11 FlexLoc
2
23
F05009-116
2
24
042898
25
056600
26
042898
1
1
1
1
1
1 Replaced
(049277) Bearing Half, Urethane Bushed and (049276) Bushing, Urethane Bearing Inner in models with serial # 34990809
and later. See Product Bulletin PB-0262 for more information.
4-60
Lastec//090616
Mower Decks
Mower Decks
Deck and 4 Wheel Yoke Assembly
4
100_026
Mower Decks
Lastec//090616
4-61
4
Mower Decks
Wheel Lift Rod Assembly
4.31 Wheel Lift Rod Assembly
REF
PART #
DESCRIPTION
061634
COMMENTS
QTY.
1
1
019348
Rod End, 1/2-20 Female
1
2
F05010-16
Nut, 1/2-20 Hex Jam
3
3
019651-1
Spacer, 5/16” Thick Knurled
5
4
019651
12
5
F05011-2
Washer, 1/2 SAE Flat
2
6
019674-1
Rod, Deck Lift Lock
1
7
041631
Spring, .72x1.5x.063 Compression
2
8
F05010-79
1
4-62
Lastec//090616
Mower Decks
Mower Decks
Wheel Lift Rod Assembly
4
100_024B
Mower Decks
Lastec//090616
4-63
4
Mower Decks
Deck Lift Cylinder Assembly
4.32 Deck Lift Cylinder Assembly
REF
PART #
DESCRIPTION
COMMENTS
059174
Cylinder Assembly, Deck Lift
Deck 4
QTY.
1
059290
Cylinder Assembly, Deck Lift
Deck 2
1
1
016292 1
Pin, 7/16” Dia Lynch Locking
1
2
0673251
Chain, 5/16” x 5 Links
1
3
F05010-10
1
4
F05010-96
2
5
F05011-5
1
6
F05010-118
Nut, 1-14 Hex Jam
1
7
058599
Block, Hydraulic Cylinder Pivot
1
8
058598
Lock Plate, Hydraulic Cylinder
1
9
F05006-161
Bolt, 5/16-18x1 Grade 5 FHCS Serrated
4
10
P107
1
11
F05007-78
1
12
F05009-125
1
Cylinder, Hyd. Deck Lift
1
13
058530
14
059293
Pin, 1/2” Dia x 2 1/2” Detent
1
15
059120
Lock Weldment, Deck Latch
1
16
061971
Switch Plate, Hydraulic Cylinder
1
17
046559
Switch, DPST N/O N/C
1
18
F05004-1
Screw, 10-24 x 1/2” S1 Hex Machine
2
19
F05010-14
2
2
Nut, #10-24 Keps
057324
Fitting, 1/4” JIC x Male Pipe Run Tee- Tap
040142
040143
Not Shown. Deck 4
2
Fitting, 1/4” NPT x 1/4” JIC w/5/16 Tap, Elbow
Not Shown. Deck 2
2
Orifice, 5/16” OD x .040” ID x 3/8”
Not Shown
4
1 067325
replaced (1) 061941 Hydraulic Cylinder Large Chain Weldment and 016292 replaced (1) F05010-178 3/4-10 Flexloc Nut to
improve durability (serial #41081011 and later).
2
Order 028624 Seal Kit for 058530 Cylinder if service is required.
4-64
Lastec//090616
Mower Decks
Mower Decks
Deck Lift Cylinder Assembly
4
100_029D
Mower Decks
Lastec//090616
4-65
4
Mower Decks
Hydraulic Hoses
4.33 Hydraulic Hoses
REF
PART #
DESCRIPTION
1
029240
Hose Assembly, 1/4” Hyd x 80"
2
057330
Hose Assembly, 48" 90 Deg JIC
064596
Abrasion Sleeve, 50” Hyd. Hose
057329
Hose Assembly, 41.5 90 Deg JIC
064595
Abrasion Sleeve, 43-1/2” Hyd. Hose
3
4-66
Lastec//090616
COMMENTS
QTY.
2
1
Not Shown
1
1
Not Shown
1
Mower Decks
Mower Decks
Hydraulic Hoses
4
100_066
Mower Decks
Lastec//090616
4-67
4
Mower Decks
Hardware Kit (CE Only)
4.34 Hardware Kit (CE Only)
REF
PART #
DESCRIPTION
064507
Kit, 100EF CE Hardware
COMMENTS
QTY.
1
1
064501
Nut Assembly, 5/16-18 Cover Retaining
22
2
F05006-30
Bolt, 5/16-18 x 2 1/4” Hex Head
2
3
064504
Spacer Assembly, Cover Retaining
2
4
064502
Nut Keeper, Cover Retaining
2
5
F05011-18
Washer, #10 SAE Flat
3
6
F04203-6
Rivet, 3/16” Dia x 3/8-1/2” Grip Range Pop
13
F05006-93
16
IS-0300
Instruction Sheet, 100EF CE Hardware Kit
1
7
4-68
Lastec//090616
Mower Decks
Mower Decks
Hardware Kit (CE Only)
4
100_108
Mower Decks
Lastec//090616
4-69
5
SECTION 5 INDEX
Mower//090616
5-1
Part Number Index
015460, Grommet, 11/16” x 1” x 1 5/16” Rubber 2-4, 2-6
016292, Pin, 7/16” Dia Lynch Locking 4-64
018751, Washer, Motor Mount 4-24
019348, Rod End, 1/2-20 Female 4-62
019350, PTO CE Label Kit, Bondioli 3-10
019549, Decal, Caution, 'Rotating Driveline' 1-4, 1-6
019557, Decal, Lastec Logo Div WM 1-4, 1-6
019651, Spacer, 5/16” Thick Deck Height 4-60, 4-62
019651-1, Spacer, 5/16” Thick Knurled 4-62
019674-1, Rod, Deck Lift Lock 4-62
019773, Bushing, Split Taper (H 7/8) 3-6
027013, Wheel, 5-5/8" Hole Anti-Scalp 4-2, 4-44
027013, Wheel, Anti-Scalp 5-5/8" hole 4-52
027053, Key, 1/4” x 2 1/2” 4-8
027053, Key, 1/4” x 2-1/2” 4-22, 4-26, 4-30
028080, Key, 1/4” Square x 1 1/2” Long 4-4
028080, Key, 1/4” Square x 1-1/2” Long 4-20
028352, Clamp, 1” ID Coated 2-4, 2-6
028724, Fitting, Straight Metric Grease 3-10
028767, Gearbox, Superior R100 9AAB - B0216 3-6
028767, Gearbox, Superior R100 9AAB-B0216 3-8
028963, Pulley, 4 “ OD Idler 3-2
029240, Hose Assembly, 1/4” Hyd x 80" 2-2, 4-66
029615, Decal, Bondioli Sleeve 3-10
029842, Bushing, 3/4 ID x 1 OD x 1 Oil 4-36
029842, Bushing, 3/4” ID x 1” OD x 1” Oil 3-2, 3-4,
4-12, 4-34, 4-46
029889, Washer, 2 1/2” x 11/16” x 3/16” Nylon 4-4, 4-8,
4-26
029889, Washer, 2-1/2” x 11/16” x 3/16” Nylon 4-20,
4-22, 4-30
029895, Pin, 1/2” Dia x 3 1/2” Snap Spring 4-56
034921, Plate, Deck Reinforcing 4-10, 4-32
034945, Housing, Spindle 4-10, 4-32
034947, Washer, 1.50” x 1.185” x 16Ga 4-6, 4-10, 4-28,
4-32
034948, Washer, 2.435” x 1.185” x 11Ga 4-6, 4-10,
4-28, 4-32
034950, Spacer, Spindle Bearing 4-10, 4-32
034951, Collar, Spindle Top 4-10, 4-32
034969, Seal, 2561 Spindle 4-10, 4-32
034982, Spring, 1-1/2OD x 8-1/2 x .195 4-36
040049, Sheave, Double - 2561 Mower 4-8, 4-22
040142, Fitting, 1/4” NPT x 1/4” JIC w/5/16 Tap, Elbow
4-64
040143, Orifice, 5/16” OD x .040” ID x 3/8” 4-64
040256, Decal, Warning, Outer Decks -- German 1-6
040257, Decal, Warning, Outer Decks -- French 1-6
040258, Decal, Warning, Outer Decks -- Italian 1-6
ii
040259, Decal, Warning, Outer Decks -- Spanish 1-6
040260, Decal, Warning, Outer Decks -- Danish 1-6
040267, Decal Kit, European Languages 1-6
040615, Plug, 1/4-18 NPT Schd w/3m 3-8
040616, Bushing, Vent 1/4” NPT to 1/8” NPT 3-8
040617, Plug, Vent 5 PSI 3-8
040643, Casting, R100 Tap 3-8
040644, Housing, R100 Mach Thru 1/8-3x 3-8
040645, Stub, Shaft/Gear 3-8
040646, Cross, Shaft/Gear 3-8
040647, Bearing Cup, TMKN L44620 3-8
040648, Bearing Cone, TMKN L44643 3-8
040650, End Cap CP 1.500-.187 D#7647 3-8
040652, Plug, 1/8-27 NPT Schd w/3m 3-8
040802, Pin, 3/8” x 3” Snapper 2-2
040910, Decal, Warning Operate From Seat 1-4, 1-6
040911, Decal, Warning Operate With Guards 1-4, 1-6
040912, Decal, Danger, Thrown Objects/Arrow 1-4, 1-6
041192, Clip, Handle Deck 2-4, 2-6
041193, Bracket, Deck Bar Holder 2-4, 2-6
041205, Decal, Thrown Objects CE Std 1-6
041206, Decal, Caution Symbol CE Std 1-6
041209, Decal, Keep Away/Rotating Drive Line CE 1-6
041630, Belt, Insta-Power 85830 1-8, 4-2, 4-44
041631, Spring, .72x1.5x.063 Compression 4-62
041684, Wheel Hub Assembly, Demountable 4-54
041685, Handle Assembly, 421D Deck Lift 2-4, 2-6
042898, Spacer, 3/4” Axle Bolt 4-58, 4-60
043224, Decal, Equipment, Height Adj EF 1-4, 1-6
043225, Decal, Articulator Logo Div WM 1-4, 1-6
043245, Shaft, Center Blade Spindle 4-10
043246, Spindle Assembly, Center w/Stiffener 4-8,
4-10, 4-22
043249, Washer, 3/8” x 1.5”x1.01” 4-20, 4-22
043367, Pulley, 5 In OD Idler 4-36
044862, Plate, Deck Reinforcing 4-8, 4-22, 4-30
045270, Pulley, 5” OD Idler, V Groove 4-12, 4-24, 4-46
045271, Pulley Assembly, 5” OD Idler, V Groove 4-24
045272, Boss, Idler Pulley Standoff 4-24
045295, Pulley Assembly, 5” OD Idler, Flat 4-12, 4-34,
4-46
045295, Pulley Assy, 5in OD Idler, Flat 4-36
045296, Pulley, 5 OD Idler, Flat 4-36
045296, Pulley, 5” OD Idler, Flat 4-12, 4-34, 4-46
045297, Boss, Idler Pulley Standoff 4-12, 4-34, 4-36,
4-46
045351, Plate, EF Superior Gearbox Rht 3-6
045371, Plate, EF Superior Gearbox Lft 3-6
045651, Decal, No Step 1-4, 1-6
Lastec//090616
Index
Part Number Index
045677, Bolt, Spindle Single Pulley 4-4, 4-8
045878, Seal, TC-1.00-1.50-.187 Polyacrylate 3-8
046273, Washer, 1/4” x 1.47” x 1.01 4-30
046273, Washer, 1/4” x 1.47” x 1.01” 4-8, 4-22
046293, Washer, Throttle Friction 4-2, 4-44
046465, Dampener, Hand Control 4-2, 4-44
046559, Switch, DPST N/O N/C 4-64
046934, Ring, Superior GB Retaining R100 3-8
047909, Guard, 325EF PTO Shaft 3-6
048183, Plate, Deck Reinforcing 4-8
048454, Hub, Demountable 4-54
048455, Spacer, 3/4” Wheel Bearing 4-54
048644, Handle, Foam .625” x 6” x 3/16” Wall 2-4, 2-6
048898, Blade Disc, Anti-Scalp 4-4, 4-8, 4-20, 4-22,
4-26, 4-30
049617, PTO Shaft Assembly, Deere 26 In 3-10
049617, PTO Shaft Assembly, Deere 26” 2-2
049628, Kit, Safety Shield 049616 049617 Complete
3-10
049633, Sleeve, Outer Shield 049616 049617 Femal 3-10
049634, Sleeve, Inner Shield 049616 049617 Male 3-10
049643, Cone, B&P Outer Shield 3-10
049648, Yoke, Outer Self Lock Deere 15 Spline 3-10
049650, Ring, Bearing B&P Outer Shield Cone Fml 3-10
049651, Ring, Bearing B&P Outer Shield Cone Male
3-10
049652, Kit, Cross Bearing S1 22x54 Zerk In Cap 3-10
049654, Yoke, Outer Pin Lock Mower 20 Spline Hrd
3-10
049656, Screw, B&P Outer Shield Cone 3-10
049659, Decal, Danger Bondioli Outer Drive Tube 3-10
049855, Belt, B-128 Deck Drive 1-8
049870, Bushing, Urethane Pivot 4-16, 4-24, 4-40
049892, Spindle Assembly, 2861AGC Dbl Sheave 4-44
049892, Spindle Assembly, 2861AGC Double Sheave
4-8
056525, Sheave, Triple-100 Outfront Mower 4-30
056565, Idler Assembly, 521 4-12
056566, Weldment, 521E Idler Plate 4-12, 4-46
056600, Wheel Assembly, 9” x 3.5” Reliance DM 4-54,
4-58, 4-60
056600-1, Tire, Carlisle Reliance 4-54
057111, Idler Assembly, 521EH High 4-44, 4-46
057160, Weldment, 521E Gear Box Idler 3-4
057175, Weldment, 521E Main Deck Idler 4-36
057189, Wheel Yoke Assembly, 521E 9” 4-44, 4-56,
4-58
057196, Idler Assembly, 521E Deck Drive 4-36
057324, Fitting, 1/4” JIC x Male Pipe Run Tee- Tap 4-64
Index
057329, Hose Assembly, 41.5 90 Deg JIC 4-66
057330, Hose Assembly, 48" 90 Deg JIC 4-66
057505, Bolt, 5/16-18 x 2” Elevator 4-16, 4-40
057523, Decal Kit, 100EF 1-4, 1-6
057524, Decal, 100in 1-4, 1-6
058204, Cover, Front Frame 2-4, 2-6
058283, Shaft, Extended Center Blade Spindle 4-32
058428, Roller Assembly, 521E/Z Anti-Scalp 4-52
058530, Cylinder, Hyd. Deck Lift 4-64
058589, Frame Weldment, 521E/Z Anti-scalp 4-52
058590, Spindle Assembly, 521E Deck 3 4-30
058591, Spindle Assembly, 521E Center 4-30, 4-32
058597, Hinge, 521E Sliding Cover 4-18, 4-42
058598, Lock Plate, Hydraulic Cylinder 4-64
058599, Block, Hydraulic Cylinder Pivot 4-64
058610, Idler Assembly, 521E Gear Box 2-4
058610, Idler Assembly, 521E Gearbox 3-4
058662, Spindle Assembly, 521E/Z 4-22
058844, Pivot Bearing, Cover 4-18, 4-42
059078, Tube, Belt Keeper 4-16, 4-40
059081, Deflector Plate, #5 Deck Grass 4-2, 4-38, 4-42,
4-44
059082, Deflector Assembly, Grass 4-2, 4-38, 4-42,
4-44
059083, Bumper, Rubber Button 4-18, 4-42
059096, Door, #1 Deck Trap 4-2
059120, Lock Weldment, Deck Latch 4-64
059125, Clamp Plate, #1 Deck Trap Door 4-2
059126, Door Assembly, #1 Deck Trap 4-2
059138, Clamp Plate, Rubber Chute 4-38
059142, Bolt, Spindle Pulley 1/2-13 x 1 3/4” 4-20, 4-22
059142, Bolt, Spindle Pulley 1/2-13x1-3/4 4-26, 4-30
059147, Gearbox Kit, 100EFD 3-6
059168, Hinge Weldment, #2 Deck 4-16
059170, Hinge Weldment, #4 Deck 4-40
059174, Cylinder Assembly, Deck Lift 4-64
059183, Yoke Weldment, Pivoting 4-56
059186, Yoke Assembly, Pivoting Wheel 2-4, 2-6, 4-56
059187, Bushing, Urethane Spring 4-56
059290, Cylinder Assembly, Deck Lift 4-64
059293, Pin, 1/2” Dia x 2 1/2” Detent 4-64
059299, Spring, Counter Balance 4-24
059709, Cover, #1 Deck Sliding 4-18
059797, Door, #2 Deck Trap 4-18
061611, Support Plate, Chute Top 4-48
061614, Chute Tab, Inside Rubber 4-48
061615, Chute, #5 Right Rubber Grass 4-48
061616, Chute Assembly, #5 Deck Grass 4-44, 4-48
Lastec//090616
iii
Part Number Index
061625, Wheel Weldment, Left Rear 4-60
061626, Wheel Weldment, Right Deck 4-60
061627, Wheel Assembly, Left Rear 4-60
061628, Wheel Assembly, Right Rear 4-60
061634, Rod Assembly, Rear Deck Height 4-60, 4-62
061635, Rubber Chute, #3 Deck 4-38
061636, Clamp Plate, #3 Chute 4-38
061637, Chute Assembly, #3 Deck Rubber 4-38
061639, Cover Assembly, #2 Deck 4-18
061640, Cover Plate, Left 4-18
061642, Cover, #2 deck Right Sliding 4-18
061643, Cover Assembly, #4 Deck Pivoting 4-42
061644, Cover Plate, Right 4-42
061646, Cover Assembly, #4 Pivoting 4-42
061657, Frame Assembly, EF Center 2-4
061658, Weldment, E Main Frame 2-4
061662, Cover, EF #3 Deck Right 2-4, 2-6
061663, Cover, EF #3 Deck Left 2-4, 2-6
061836, Cover, #1 Deck 4-2
061838, Guard Weldment, #2 Front 4-18
061839, Guard Weldment, #4 Front 4-42
061844, Cover Weldment, #5 4-44
061847, Guard Weldment, #2 Rear 4-18
061848, Guard Weldment, #4 Rear 4-42
061855, Spacer, Bearing 4-16, 4-40
061856, Bearing, 1.25” x 2.25” x .50” 4-16, 4-40
061877, Mulching Plate, #5 Deck 4-50
061881, Mulching Plate, #3 4-24, 4-38, 4-50
061882, Dam Kit, 100” Mulching 4-50
061894, Arm Weldment, JD1565 Left Push 2-2
061895, Arm Weldment, JD1565 Right Push 2-2
061899, Arm Assembly, JD1565 Push 2-2
061940, Hardware Kit, 100EF Deere 2-2
061944, Cover, Main Frame Rear 2-4, 2-6
061945, Cover, Front Right Frame 2-4
061947, Cover Weldment, Left Front Frame 2-4
061948, Cover Assembly, Main Frame 2-4, 2-6
061949, Spacer, Plastic 3/4” OD x .325” ID x 1” 2-4
061971, Switch Plate, Hydraulic Cylinder 4-64
062051, Washer, Water Shed Pulley 4-12, 4-24, 4-46
062115, Bushing, .875” Bearing 4-16, 4-40, 4-60
0621154, Bushing, .875” Bearing 4-24
062118, Support Plate, Chute Top 4-48
062135, Kit, (1) Tire & (2) Yellow Wheel Halves 4-54
062145, Support Plate, Chute Side 4-48
062149, Sleeve, .875” x 1.14” Lg Bushing 4-16, 4-40
062149, Sleeve, .875” x 1.14” Long Bushing 4-24
0621491 , Sleeve, .875” x 1.14” Long Bushing 4-60
iv
062168, Sleeve, 7/8” OD x 5” Long Bushing 4-52
062400, Yoke Weldment, 3300 9” 4-58
062429, Decal, Lastec Made in USA 1-4, 1-6
062431, Bracket Weldment, Push Arm 2-2
062999, O-Ring, Spindle 4-10, 4-32
063216, Spring, Wheel Yoke 1-0 Urethane 4-58
063265, Blade, 21” x 2 1/2” x 1/8” Low-Lift Ultra 4-4,
4-8, 4-20, 4-22, 4-26, 4-30
063327, Decal, 3682/96 Gearbox Fluid 1-4, 1-6
063358, Main Harness, 100EFD 2-2
063359, Supplemental Harness, 100EFD 2-2
063360, Electrical Kit, 100EFD1565 2-2
063393, Decal, 100EF 1-4, 1-6
063934, Idler Assembly, EFLW Main Drive 3-2
063935, Idler Weldment, EFLW Main Drive 3-2
064252, Deck Weldment, EF #3 Black 1-8
064253, Frame Assembly, EF Center Black 2-6
064254, Weldment, E Main Frame Black 2-6
064256, Deck Weldment, #2 Black 1-8
064257, Hinge Weldment, #2 Deck Black 4-16
064261, Deck Weldment, #4 Black 1-8
064262, Hinge Weldment, #4 Deck Black 4-40
064268, Deck Weldment, EFC #1 Black 1-8
064271, Deck Weldment, EFC #5 Black 1-8
064386, Step Assembly, EFDC Mount 2-8
064387, Step Weldment, EFDC 2-8
064501, Nut Assembly, 5/16-18 Cover Retaining 4-68
064502, Nut Keeper, Cover Retaining 4-68
064504, Spacer Assembly, Cover Retaining 4-68
064507, Kit, 100EF CE Hardware 4-68
064558, Door Assembly, #2 Trap 4-18
064568, Door Assembly #3 Deck Trap 4-24
064569, Door, 521E/Z #3 Deck Trap 4-24
064575, Door, #4 Deck Trap 4-42
064576, Clamp Plate, #4 Trap Door 4-42
064580, Baffle Assembly, #4 Blowout 4-42
064581, Baffle Weldment, #4 Blowout 4-42
064595, Abrasion Sleeve, 43-1/2” Hyd. Hose 4-66
064596, Abrasion Sleeve, 50” Hyd. Hose 4-66
064660, Decal, Belt Diagram 100/120 ER/EF Deck 1-4,
1-6
064661, Door Assembly, #2 Trap 4-18
064662, Door, #2 Deck Trap 4-18
067043, Cover, 1 3/8”” Hole Plug 4-2, 4-18, 4-42, 4-44
Lastec//090616
Index
Part Number Index
067065, Decal Kit, CE Deck 1-6
067076, Pin, 3/8” Dia Lynch Locking 4-58
067088, Door, 521E/Z #3 Deck Trap 4-24
067135, Anti-Scalp Roller Assembly, 3300 4-14
067136, Bracket Weldment, 3300 Anti-Scalp 4-14
067142, Axle Rod, 3300 Anti-Scalp Roller 4-14
067316, Axle Rod, 3300 Anti-Scalp Roller 4-52
0673181, Sheave, 2BK80H 3-6
0673251, Chain, 5/16” x 5 Links 4-64
067330, Belt, Goodyear 85530 1-8, 3-6
067376, Door, #2/4 Deck Trap 4-18, 4-42
067686, Spacer, Spindle Bearing Housing 4-6, 4-28
067687, Shaft, Blade Spindle ZT Cast 4-6
067688, Sheave, Double - Mower Deck 4-4, 4-20
067695, Spindle Assembly, ZT 21” D6.3-6.3 4-4
067696, Spindle Assembly, Center w/Stiffener 4-6
067696, Spindle Assembly, ZT Cast 4-4, 4-20
067792, Cover Assembly, Left Transition 4-18
067999, Spindle Housing, ZT- Common Core 4-6, 4-28
072105, Spacer, 3/8” Deck Lift 425 Yzc 4-24
072279, Baffle Plate, 100" #1 & 3 Deck 4-38
072511, Spacer, Bearing Housing 4-6, 4-28
072514, Spindle Assembly, ZT 21” D6.3-6.3 Spacer 4-20
072515, Sheave, Triple - D5.3-5.3-6.3 B1.00 Ca 4-26
072517, Spindle Assembly, EF Cast 4-26, 4-28
072518, Shaft, Blade Spindle EF Cast 4-28
072621, Spindle Assembly, EF 21" D5.25-5.25-6.3 4-26
072677, Plate Weldment, Deck Belt Guard 4-24
072722, Spring, 1 1/2” OD x 8 1/2” x .195” Double Rate
4-34
072740, Keeper, Deck Idler Belt ER 4-34
072741, Idler Assembly, 100EF Deck Drive 4-34
072742, Idler Weldment, 100EF Main Deck 4-34
072884, Fitting, 1/4-28 65 Deg Grease 4-54
073440, Idler Assembly, EFLW Main Drive 2-6
105249, Pulley Assembly, 5In OD Idler, V Groove Tall
4-12
105249, Pulley Assy, 5In OD Idler, V Groove Tall 4-46
105292, Wheel, 5 In Dia Anti-Scalp 5/8 Hole 4-16, 4-40
105612, Cover Weldment, Right Front Frame 2-6
105614, Cover Weldment, Left Front Frame 2-6
A
A126, Transfer Assembly, RS Weight 2-2
F
F04203-6, Rivet, 3/16” Dia x 3/8-1/2” Grip Range Pop
4-68
F04254-12, Ring, 62mm IR Din #472 Retaining 4-12,
Index
4-24, 4-34, 4-36, 4-46
F04254-45, O-Ring, 2 7/16" ID x 3/16" Diameter 4-10
F04254-45, O-Ring, 2-7/16" ID x 3/16" Diameter 4-32
F04254-46, Ring, 3/4” External - External 4-24
F05004-1, Screw, 10-24 x 1/2” S1 Hex Machine 4-64
F05004-177, Screw, M4-.7 x 65 SHC 2-2
F05004-177, Screw, M4-.7x65 SHC Zinc 3-10
F05004-183, Bolt, 1-8 x 4 1/4” Hex Head Grade8 w/Nylon Patch 2-2
F05004-277, Bolt, M10-1.25 x 40mm Hex Head Grade
8.8 4-16, 4-40
F05005-15, Bolt, 1/4-20 x 1/2” Hex Head 2-4, 4-34
F05005-212, Bolt, 1/4-20x3/4 GR5 FHCS Serrated 2-6
F05006-1, Bolt, 5/16-18 x 1” Hex Head 3-6
F05006-102, Bolt, 5/16-18 x 3/4” Hex Head Grade 5 4-2,
4-24
F05006-102, Bolt, 5/16-18 x 3/4” Hex Head Grade 5 Zinc
2-4
F05006-111, Bolt, 5/16-18 x 1.25” SHCS 3-8
F05006-114, Screw, 5/16-18 x 3/4” FHSw/Nyloc Patch
B/O 3-6
F05006-140, Bolt, 5/16-18 x 5” Hex Head Grade 5 4-10,
4-32
F05006-141, Bolt, 5/16-18 x 1” BHCS SS 4-48
F05006-153, Bolt, 5/16-18 x 1-1/2 Carriage Grade 5 4-48
F05006-160, Bolt, 5/16-18x3/4 Grade 5 FHCS Serrated
4-18, 4-24, 4-42
F05006-161, Bolt, 5/16-18x1 Grade 5 FHCS Serrated
4-64
F05006-162, Bolt, 5/16-18x1/2 Grade 5 FHCS Serrated
4-18, 4-42
F05006-163, Bolt, 5/16-18x1-1/2 GR5 FHCS Serrated
2-6
F05006-27, Bolt, 5/16-18 x 1” Hex Head Grade 5 4-38
F05006-30, Bolt, 5/16-18 x 2 1/4” Hex Head 4-68
F05006-76, Bolt, 5/16-18 x 1 1/2” Hex Head Full Thread
Grade 5 4-12, 4-46
F05006-81, Bolt, 5/16-18 x 1 3/4” FT Hex Head Grade 5
2-4
F05006-86, Bolt, 5/16-18 x 3/4” Carriage 4-42
F05006-90, Bolt, 5/16-18 x 1” Carriage Grade 5 4-24,
4-38, 4-48, 4-50
Gr5 4-10
Grade 5 4-32, 4-68
F05007-123, Bolt, 3/8-16 x 1 1/4” Hex Head Grade 5 3-6
Lastec//090616
v
Part Number Index
4-14
F05007-165, Bolt, 3/8-16x1 Carriage 4-2, 4-38, 4-42,
4-44
F05007-209, Bolt, 3/8-16 x 1 1/2” Hex Head Grade 8 3-2,
3-4
F05007-73, Bolt, 3/8-16 x 3” Hex Head Grade 5 4-56
F05007-78, Bolt, 3/8-16 x 1 1/2” Hex Head Gr5 4-20
4-26, 4-64
F05007-85, Bolt, 3/8-16 x 1 1/2” Carriage Gr5 4-22
F05007-85, Bolt, 3/8-16 x 1 1/2” Carriage Grade 5 4-8
F05007-85, Bolt, 3/8-16” x 1 1/2” Carriage Gr5 4-30
4-46
3-4
F05008-159, Bolt, 1/2-13 x 6 1/2” Hex Head Grade 5
4-60
4-40, 4-56
4-34, 4-36
F05008-71, Bolt, 1/2-13 x 1” Hex Head Full Thread 4-14
4-16, 4-40, 4-44
4-36
4-60
F05009-116, Bolt, 5/8-11 x 2” Carriage Grade 5 4-60
F05009-116, Bolt, 5/8-11 x 2” Grade 5 Carriage 4-52
F05009-125, Bolt, 5/8-11 x 4 1/2” Hex Head Grade 8
4-64
F05009-140, Bolt, 5/8-11x3-1/4 FT HH 4-16, 4-40
4-16, 4-40, 4-44
4-44
4-24, 4-40
Grade 5 4-16, 4-40
F05009-44, Bolt, 3/4-10x2 1/2 Hex Head Grade 5 2-2
F05009-67, Bolt, 1/4-20 x 3/4” Hex Head Grade 8 3-6
F05009-74, Bolt, 1/2-13 x 2 3/4” Hex Head Grade 8 Plain
2-8
vi
4-8, 4-20, 4-22, 4-26
F05009-95, Bolt, 5/8-18 x 1 3/4” Hex Head Grade 5 Znc
4-30
F05010-10, Nut, 3/8-16 Hex Nyloc 2-8, 3-6, 4-8, 4-14,
4-22, 4-30
F05010-10, Nut, 3/8-16 Hex Nylock 4-2, 4-56, 4-64
F05010-104, Nut, 3/4-10 Jam 2-2
F05010-109, Nut, 1-8 Self Lock 2-2
F05010-118, Nut, 1-14 Hex Jam 4-64
F05010-121, Nut, 5/16-18 Nylon Locking Jam 4-2, 4-38,
4-42, 4-44, 4-50
F05010-122, Nut, 3/4-10 Half Nylon Lock 4-46
F05010-124, Nut, 3/8-16 Half Nylon Lock 3-2, 3-4
F05010-127, Nut, 1/2-13 Half Nyloc 3-2, 4-24
F05010-127, Nut, 1/2-13 Half Nylon Lock 4-12, 4-46,
4-60
F05010-127, Nut, 1/2-13 Hex Half Nylon Lock 4-34,
4-36
F05010-14, Nut, #10-24 Keps 4-64
F05010-156, Nut, 1/4-20 Half Nylock 2-4
F05010-16, Nut, 1/2-20 Hex Jam 4-62
F05010-167, Nut, M4-.7 Prev Torq 2-2
F05010-167, Nut, M4-.7 Prev Torq Znc 3-10
F05010-17, Nut, 5/16-18 Hex 4-12, 4-16, 4-40, 4-46,
4-54
F05010-177, Nut, 3/4-10 Stover Swaged 3-2, 3-4, 4-58,
4-60
F05010-185, Nut, 5/8-11 FlexLoc 4-2, 4-16, 4-24, 4-40,
4-44, 4-52, 4-60
F05010-192, Nut, M10-1.25 Free Zinc Plate 4-2, 4-16,
4-40, 4-44
F05010-220, Nut, 1/4-20 Flanged Hex Nylock 2-6
F05010-221, Nut, 5/16-18 Flanged Hex Nylock 4-12,
4-18, 4-24, 4-38, 4-42,
4-46, 4-48
F05010-222, Nut, 3/8-16 Flanged Hex Nyloc 4-4, 4-20,
4-26
F05010-222, Nut, 3/8-16 Flanged Hex Nylock 4-2, 4-38,
4-42, 4-44
F05010-225, Nut, 3/4-10 Flanged Hex Nylock 4-12
F05010-29, Nut, 3/8-16 Jam 3-4
F05010-35, Nut, 1/2-13 Hex 4-24, 4-34, 4-36
F05010-58, Nut, 5/16-18 Nylock Hex 4-44
F05010-58, Nut, 5/16-18 Nylok Hex 4-32
F05010-58, Nut, 5/16-18 Nylon Lock Hex 4-10
F05010-79, Nut, 1/2-20 Jam Nyl Lock 4-62
F05010-8, Nut, 1/2-13 Nyl Hex Lock 4-2, 4-16, 4-40,
4-44
Lastec//090616
Index
Part Number Index
F05010-8, Nut, 1/2-13 Nylon Hex Lock 2-8, 3-4, 4-24,
4-56
F05010-82, Nut, 5/8-11 Jam 4-2, 4-44
F05010-96, Nut, 5/8-11 Jam Nyl Lock 4-16, 4-40, 4-64
F05011-101, Washer, 1/2” SAE Flat Grade 5-8 2-8
F05011-11, Washer, 1/4” SAE Flat 2-4
F05011-115, Washer, 1” ID .03 SS Shim 4-58
F05011-116, Washer, 1” ID .06 SS Shim 4-58
F05011-13, Washer, 5/16” Split Lock 2-4, 3-6, 4-10,
4-16, 4-24, 4-32, 4-40, 4-54
F05011-14, Washer, 1/4” Split Lock 3-6, 4-34
F05011-17, Washer, 5/16” SAE Flat 2-4, 3-6, 4-38,
4-44, 4-50
F05011-18, Washer, #10 SAE Flat 4-68
F05011-2, Washer, 1/2 SAE Flat 4-62
F05011-2, Washer, 1/2” SAE Flat 3-2, 3-4, 4-24, 4-56
F05011-27, Washer, 5/8” Split Lock 4-8
F05011-3, Washer, 3/8” Flat SAE 2-8, 4-14, 4-56
F05011-3, Washer, 5/16” Split Lock 4-2
F05011-40, Washer, 5/8” Standard Flat 4-16, 4-24, 4-40
F05011-5, Washer, 5/8” SAE Flat 4-16, 4-40, 4-52,
4-64
F05011-50, Washer, 5/16” x 1 1/4” Fender 4-18, 4-38,
4-42, 4-48
F05011-62, Washer, 3/4” SAE Flat 4-58
F05011-68, Washer, 1/2 Standard Flat 4-46
F05011-68, Washer, 1/2” Standard Flat 4-12, 4-24,
4-34, 4-36
F05011-77, Washer, 3/4” AN Yel/Cad 3-2, 3-4, 4-12,
4-24, 4-46
F05011-89, Washer, 2 1/2” OD x 5/8” ID x 3/16” Std Flat
Znc 4-4, 4-8, 4-26, 4-30
F05011-89, Washer,2 1/2” ODx5/8” IDx3/16” Std Flat
Znc 4-20, 4-22
F05011-9, Washer, 1/2” Split Lock 4-14, 4-16, 4-24,
4-40, 4-52
F05011-97, Washer, 1/2” Plain Belleville 4-4, 4-8, 4-20,
4-22, 4-26, 4-30
F05012-64, Pin, 1/8” x 1/2” Roll 4-10, 4-32
F05012-70, Pin, 1/2” x 1 3/4” Clevis Yzc 4-52
F05015-36, Screw, #10 x 1/2” Long AB Thrd Slot Hex
Head 4-18, 4-42
F81003-25, Bolt, M10-1.25 x 30mm HHFT 8.8 4-44
F81003-25, Bolt, M10-1.25x30mm HHFT 8.8 4-2
F81033-6, Nut, 10mm x 1.25 Nylon 4-2, 4-16, 4-40,
4-44
I
IS-0300, Instruction Sheet, 100EF CE Hardware Kit 4-68
IS-0387, Instruction Sheet, 1-12 Spindle 4-10
Index
M
Man-100EFD, Manual, 100EFD (Deere) 2-2
P
P04101-1, Key, #606 Woodruff 3-6
P05059, Pin, 1/8” x 1 13/16” Safety 4-52
P103, Bearing, Spindle Top 6305 RS 4-12, 4-24, 4-34,
4-36, 4-46
P105, O-Ring, 2 1/2” ID x 2 3/4” OD 4-6, 4-28
P107, Fitting, 1/4-28 Straight Grease 2-2, 4-2, 4-4, 4-8,
4-20, 4-22, 4-26, 4-30,
4-44, 4-56, 4-64
P109, Bushing, 1” ID x 1-1/4” OD x 1-1/4” Flanged 4-58
P11035, Bearing, 6206-2NSE 4-6, 4-10, 4-28, 4-32
P113, Pin, 1/4” Dia Lynch 2-2
P116, Washer, 1-1/16” x 1-3/4” x 1/8” Znc 4-58
P117, Decal, Hands & Feet 1-6
P123, Fitting, Grease 90 Deg. 1/4-28 2-4, 2-6, 4-12,
4-46
P128, Blade, 21” x 2 1/2” x 1/4” High Lift 4-4, 4-8, 4-20,
4-22, 4-26, 4-30
P175, Spring, 2” x 6” Blue 2-2
P246, Blade, 21” Low-Lift 4-4, 4-8, 4-20, 4-22, 4-26,
4-30
P256, PTO Shield Retaining Chain, Bondiol 3-10
P292, Bearing, Tapered Roller, 3/4” ID 4-54
P293, Seal, TRB, 3/4” ID 4-54
P294, Fitting, 1/4-28 45 Deg Grease 4-34, 4-36
P297, Hub Assembly, Demountable 4-54
P322, Blade, 21” Gator Mulching 4-4, 4-8, 4-20, 4-22,
4-26, 4-30
P402, Bearing Race Insert, 3/4" TRB 4-54
P408, Pulley, 4 “ OD Idler 3-4
P410, Spring, 1” x 7” Extension 3-2, 3-4, 4-12, 4-46
P438, Wheel, Anti-Scalp 6” x 3.25” x 3/4” ID 4-14
P442, Decal, Warning, Outer Decks 1-4, 1-6
P478, Decal, Danger - Rotating Blades 1-4, 1-6
R
R66949, Quik-Tatch Weight, 42 Lbs. 2-2
S
S04827, Handle, Outrigger Jack 2-4, 2-6
T
T104, Spacer, ID x 1-3/4” OD x 1/4” 4-58
T107, Spacer, 1 3/4” OD x 1 1/16” ID x 1” 4-58
TCA13791, Enclosure Kit, Vehicle 2-2
TCB10303, Mounting Kit, Rear Weight 2-2
TCB10566, Transfer Kit, Hydraulic Weight 2-2
TCB11475, Hydraulic Kit, Double Spool Auxiliary 2-2
Lastec//090616
vii
Part Number Index
W
W168, Tube Weldment, Weight Transfer 2-2
W143, Rod Weldment, Weight Transfer 2-2
viii
Lastec//090616
Index

Parts Manual: 100EFDC (Master)

Transcription

Similar documents

Parts Manual: LT15 (2010+ Master)

Parts Manual: LT40HD Super (2010+ Master)