Gilbarco Salesmaker Single Dispensing Pump Model T337D, and

COMMONWEALTH
OF AUSTRALIA
NATIONAL STANDARDS COMMISSION
Weights and Measures
(National Standards)
Act 1960-1964
Certificate of Approval
Weights and Measures
(Patterns of Instruments)
Regulations
CERTIFICATE NUMBER 5/6A/7
-b
In respect of the pattern of
Gilbarco
Variants
Submitted
Salesmaker
Single Dispensing
1 to 4, 9 to 18, 21 and 22.
by:
And in respect
submitted
by:
Pump
of Variants
This is to certify
that the
illustrated
and described
by the National
Standards
No 12 of the abovementioned
as being suitable
for use
and
5, 6, 7, 8, 19 and 20 of the pattern
was granted
Ltd. ,
pattern
and variants
of the instruments
in this Certificate
have been examined
Commission
under the provisions
of
Regulations
and have been approved
for trade.
for:
1.
The pattern
and variants
October,
1966,
2.
Variants
7/5/69
T337D,
Gilbarco
Australia
Ltd. ,
16-34 Bennie Street,
North Ryde,
New South Wales.
2113.
Engineering
Products
Pty.
418-42 8 Burnley
Street,
Burnley,
Victoria.
3121.
Approval
Model
1 to 7, 9 to 18 and 21 on 18th
8, 19 and 20 on 22nd December,
1967.
Cont’d
over
Certificate
3.
Variant
4.
The pattern
and variants
1 to 22 as an approval,
pursuant
to No 12 of the abovementioned
Regulations
on 10th
February,
1969.
Approval
conformity
This
Page
No 5/6A/7
22 on 26th November,
1968.
was granted
on condition
that all instruments
with the pattern
or its variants:
made
1.
are appropriately
marked
NSC No 5/6A/7
and, where
required
by State legislation,
with the State approval
number
also; and
2.
comply with the General
Specifications
for Weighing
and Measuring
Instruments
to be Used for Trade
in
respect
of that part of the instrument
which was not
previously
approved
by a State.
Certificate
in
comprises:
Pages 1 to 14 dated 7th May, 1969.
Figures
5/6A/7
- 1 to 58 undated.
This
Certificate
is applicable
in all States.
Signed
Date of issue
7,‘5/69
’
,,N-7th May,
1969.
2
Certificate
No 5/6A/7
Page
3
DESCRIPTION
The pattern
is a retail
price-computing
Gilbarco
Salesmaker
Single Dispensing
Figure
1) and comprises
the following
the approval,
housed in a sheet metal
shown in Figures
2 and 3:
flowmeter
known as the
Pump Model T337D (see
components
significant
to
cabinet
and arranged
as
1.
Pump - power-driven
with integral
strainer
positive
displacement
rotary
vane
and integral
spring-loaded
by-pass
type
valve.
2.
Gas Separator
with integral
float chamber
(Gilbarco
T257-3)
gas separation
is achieved
by reducing
the velocity
and
changing
the direction
of flow of the liquid over a weir.
The
gas and a small proportion
of the liquid is forced by pump
pressure
through
an orifice
to the float chamber
from which
the liquid returns
to the suction
side of the pump through
a
float-operated
valve.
The gas discharges
past another
float-operated
valve through
a pipe to the upper extremity
of
the hose nozzle holster
where it is vented to atmosphere
(see
Figure
4).
3.
Meter
(Gilbarco
T262G) - four-piston
radial
(see Figure
5).
The meter
is sealed by a wire passing
through
a hole drilled
in a peg which fits through
one of the holes in the rim of the
calibrating
wheel and into one or other of two drilled
bosses
in one of the cylinder
covers,
thence backwards
through
each
of the adjacent
holes in the rim of the wheel and finally through
a hole drilled
through
the end of the calibTrating
wheel spindle.
4.
Computer
indication
maximum
- Veeder-Root
3-wheel
manual
reset,
with a maximum
of 99; gallons,
99/11d total price and 5/11id
price per gallon (see Figure
6).
NOTE:
The illustrations
of the pattern
and variants
(except
Figures
6 and 28) are of instruments
in which the computers
have been converted
to decimal
currency,
as described
in
Certificate
No 5/6A/16.
5.
7,‘5/69
Non-return
valve
with integral
relief
valve.
Certificate
No 5/6A/7
Page
G.
Sight
7.
Hose - external
length.
8.
Nozzle
9.
Dial face - on each side of the pattern
behind a glazed window
is a grey dial face with white markings
carrying
the notice
“sight glass must be full before
and after delivery”
located
as
close as possible
to, and with an arrow pointing
at the sight
glass.
glass
(Gilbarco
(Gilbarco
T261M)
retractable
T250-16)
- full-flow
$ inch bore,
- manual
type
type
(see
Figure
7).
up to 12 ft 6 in in
(see
Figures
8 and 9).
In returning the pump-operating handle to the stop position, the
motor
is stopped
and the interlock
which prevents
it from being
restarted
is engaged,
when or before
the radial edge of the shroud
of the handle comes into line with the left-hand
face of the hose
nozzle support
bracket
(see Figure
10).
An aide memoire
indicating
the pattern
and its variants
as Figure
58.
7/5/69
the compatibility
with the variant
of each component
in
assemblies
is annexed
4
Certificate
No 5/6A/7
SCHEDULE
1.
7/5/69
Page 5
OF VARIANTS
In which two sets of the following
components
are assembled
a single cabinet
(see Figure
11) and known as the Gilbarco
Salesmaker
Dual Dispensing
Pump Model T338:
- as described
in
(a)
Pump
(b)
Gas Separator
- Gilbarco
T257M (see Figure
la), in which
gas separation
is achieved
by reducing
the velocity
of the
liquid discharging
from the pump into a chamber
where any
gas rises
in the chamber
and, together
with a small
proportion
of the liquid,
is forced by pump pressure
through
a pipe to a float chamber.
(c)
Float Chamber
- Gilbarco
Model T257P (see Figure
13),
into which gas and liquid flows from the gas separator
and,
from the top of which gas discharges
to the upper
extremity
of the hose nozzle holster
where it is vented
to the atmosphere
and, from which liquid returns
through a
float-operated
valve to the pump suction.
(d)
Meter
(e)
Computer
pattern.
(f)
Non-return
valve
(g)
Sight
glass
- Gilbarco
(h)
Hose
- as described
(i)
Nozzle
0)
Dial face
The
components
The
pump-motor
- Gilbarco
in the pattern.
T262G,
as described
- Veeder-Root
- T250H
with integral
T261N
manual
hose
relief
in the
valve.
full flow
(see
Figure
14).
nozzle
(see
Figures
15 and 16).
in the pattern,
arranged
interlocks
as described
in the pattern.
- as described
are
3-wheel,
in the pattern.
as shown
are
in Figures
as described
17 and 18.
in the pattern.
‘)
4.
In which the following
components
are assembled
in a cabinet
(see Figure
19) and known as the Gilbarco
Trimline
Dispensing
Pump Model T161:
(3)
Pump
(b)
Gas Separator
pattern.
(cl
- as described
in the pattern.
- Gilbarco
T257-3,
as described
in the
Meter - Gilbarco
T262Q, 4-piston
similar
to the T262G as described
the inlet and discharge
connections
radial meter
in the pattern
repositioned.
which is
but with
Cd)
Computer
pattern.
as described
in the
(e)
Non-return
valve
(fl
Sight
- Gilbarco
(.a
Back-pressure
valve - located
downstream
of the meter,
between
the inlet and outlet pipe of the partial-flow
sight
glass;
it ensures
that liquid flows through
the sight glass
by creating
a pressure
difference
between
the inlet and
outlet pipe.
01)
Hose
(i)
Nozzle
(.i)
Dial face
- Veeder-Root
glass
with integral
- as described
- Gilbarco
The components
T261X,
relief
valve.
by-pass
type
(see
Figure
20).
in the pattern.
T250H,
- as described
are
3-wheel,
arranged
as described
in variant
1.
in the pattern.
as shown
in Figures
21 and 22.
When stopping
the pump, the interlock,
which prevents
the motor
from being restarted,
is engaged when or before
the motor
is
switched
off, by which time the pump-operating
handle has not
passed
the position
illustrated
(see Figure
57).
The cam on the
motor-operating
switch shaft is located
in its proper
position
relative
to the rocker
arm of the interlock
mechanism
by means
7/5/69
Certificate
of shim
3.
washers
Figure
23).
in a
(a)
Pump
(b)
Gas Separator
- Gilbarco
T257T,
which is similar
to the
T257M as described
in variant
1, but with the liquid inlet
and outlet and the gas/liquid
connection
repositioned
(see
Figure
25).
(c)
Float chamber
- Gilbarco
T257N - similar
as described
in variant
1 but with a shorter
(d)
Meter
(e)
Computer
pattern.
(f)
Non-return
valve
(g)
Sight
- Gilbarco
(h)
Back-pressure
(i)
Hose
(j)
Nozzle
(k)
Dial face
The nozzle
variant
2.
7/5/69
(see
7
In which two sets of the following
components
are assembled
single cabinet
(see Figure
24) and known as the Gilbarco
Trimline
Dispensing
Pump Model T162:
- as described
- Gilbarco
in the pattern.
T262G,
as described
- Veeder-Root
glass
T261X,
valve
- Gilbarco
3-wheel,
with integral
- as described
The components
4.
Page
No 5/6A/7
hang-up
in the pattern.
as described
relief
in the
valve.
as described
- as described
in variant
in variant
2.
2.
in the pattern.
T250H,
- as described
are
to the T257P
cylinder.
as described
in variant
1.
in the pattern.
arranged
and interlock
as shown
in Figures
is as described
In which two sets of the following
components
in a single cabinet
(see Figure
28) and known
26 and 27.
in
are assembled
as the
Certificate
No 5/6A/7
Gilbarco
Dual
Page
Dispensing
Pump
(a)
Pump
- as described
(b)
Gas Separator
pattern.
(c)
Meter
(d)
Computer
pattern.
(e)
Non-return
valve
(f)
Sight
glass
- Gilbarco
(g)
Hose
- as described
(h)
Nozzle
0)
Dial face
T257-3,
T262G,
3-wheel,
with integral
T261G
are
in the
in the pattern.
as described
relief
in the
valve.
full flow
(see
Figure
29).
in the pattern.
T250-16,
- as described
The components
50 inch:
as described
as described
- Veeder-Root
- Gilbarco
T401-403,
in the pattern.
- Gilbarco
- Gilbarco
Model
as described
in the pattern.
in the pattern.
arranged
as shown
in Figures
Vapour from the gas separators
is discharged
from behind the turndown
of the roof panel.
30 and 31.
to atmosphere
Each pump motor
is stopped and interlocked
when or before
the
tip of the left-hand
face of the jaw of the pump-operating
handle
comes
into line with the left-hand
face of the lug on the hose
ncozzle support
bracket
(see Figure
32).
5.
In which the following
components
are assembled
(see Figure
33) and known as the Epex T-Shape
Pump Model 694-O:
(a)
Pump
(b)
Gas Separator
pattern.
7/S/69
- as described
in a cabinet
Single Dispensing
in the pattern.
- Gilbarco
T257-3,
as described
in the
8
Certificate
No 5/6A/7
Page
(cl
Meter
(4
Computer
pattern.
W
Non-return
valve
(0
Sight
- Epex
(g)
Back-pressure
- Gilbarco
T262G,
- Veeder-Root
glass
7/5,‘69
0)
Nozzle
di)
Dial face
3-wheel.
with integral
EP661-0
valve
01) Hose - as described
6.
as described
in the pattern.
as described
relief
9
in the
valve.
by-pass
type
- as described
(see
in variant
Figure
34).
2.
in the pattern.
- Gilbarco
T250-16,
- as described
The components
are
The pump motor
variant
4.
is stopped
as described
in the pattern.
in the pattern.
arranged
as shown
in Figures
and interlocked
35 and 36.
as described
in
In which two sets of the following
components
are assembled
a single cabinet
(see Figure
37) and known as the Epex
T-Shape
Dispensing
Pump Model 696-O:
- as described
in
(a)
Pump
(b)
Gas Separator
- Epex 705/O - gas separation
is achieved
in
a manner
similar
to the Gilbarco
T257M,
as described
in
variant
1 (see Figure
38).
(c)
Float chamber
- Epex 5586 - similar
to the Gilbarco
T257P,
as described
in variant
1 (see Figure
38).
(d)
Meter
(e)
Computer
pattern.
- Gilbarco
in the pattern.
T262G,
- Veeder-Root
as described
3-wheel,
in the pattern.
as described
in the
Certificate
No 5/6A/7
(f)
Non-return
valve
(g)
Sight
- Epex
(h)
Back-pressure
0)
Hose
0)
Nozzle
(k)
Dial face
glass
The pump
described
with integral
EP661-0
valve
- as described
valve.
- as described
- as described
T250-16,
- as described
are
relief
in variant
in variant
motors
are stopped
in variant
4.
as described
in the pattern.
as shown
in Figures
and interlocked
(b)
Gas Separator
pattern.
(c)
Meter
(4
Computer
pattern.
W
Non-return
valve
(0
Sight
- Epex
(g)
Back-pressure
01)
Hose
7/5/69
- as described
glass
T257-3,
T262G,
- Veeder-Root
as described
as described
3-wheel,
with integral
EP661-0,
valve
- as described
in a cabinet
Single
in the pattern.
- Gilbarco
- Gilbarco
39 and 40.
in the manner
In which the following
components
are assembled
(see Figure
41) and known as the Epex Taper-top
Dispensing
Pump Model 695-O:
Pump
2.
in the pattern.
arranged
(a)
5.
in the pattern.
- Gilbarco
The components
7.
Page
relief
in the pattern.
as described
in the pattern.
in the
valve.
as described
- as described
in the
in variant
in variant
2.
5.
10
Certificate
No 5/6A/7
0)
Nozzle
(8
Dial face
The
components
- Gilbarco
T250-16,
- as described
are
The pump motors
variant
4.
8.
Page
in the pattern.
in the pattern.
arranged
are
as described
stopped
as shown
in Figures
and interlocked
as described
In which the following
components
are assembled
(see Figure
44) and known as the Epex T-Shape
Pump Model 694-80:
(4
Pump
- as described
Cn) Gas Separator
42 and 43.
in
in a cabinet
Single Dispensing
in the pattern.
- Gilbarco
T257-3,
as described
in the
pattern.
--
(c)
Meter - Gilbarco
T262-1,
2-piston
in-line
meter
(see
Figure
45), which is sealed by a lead seal contained
in an
undercut
hole in a plug securing
a sealing
plate which
engages
with peripheral
slots in two calibrating
wheels.
(4
Computer
pattern.
(e)
Non-return
valve
(0
Sight
- Epex
(8)
Back-pressure
01)
Hose
6)
Nozzle
(j)
Dial face
- Veeder-Root
glass
- as described
The components
7/S/69
with integral
EP661-0,
valve
- Gilbarco
3-wheel,
relief
in the
valve.
as described
- as described
in variant
in variant
5.
2.
in the pattern.
T250-16,
- as described
are
as described
arranged
as described
in the pattern.
in the pattern.
as shown
in Figures
46 and 47.
11
Page
12
The pump motor is stopped and interlocked
when or before the tip
of the lcf’t-hand
face of the finger-plate
of the pump-operating
handle comes
into line tvith the right-hand
face of the lug on the
hose nozzle support
bracket
(see Figure 48).
Ir.
10.
11.
The pattern
and variants
1, 3, 4, 5, 6 and 7 being fitted with a
Gilbarco
Model 1‘262-3 4-piston
radial meter
which is similar
to
the TZ62G
meter
as described
in the pattern,
but without
\zear-rings
fitted to the pistons.
The pattern
and v‘lriants
1, 3, 4, 5, 6 and 7 being fitted with a
Gilbarco
Model ‘~26211 4-piston
radial meter
which is similar
to
the T262G as described
in the pattern
but with a sprmg-loaded
O-ring
seal on the rotary
valve in place of a bellows
and
carbon-ring
seal.
Variants
4-piston
5, 6 and 7 being fitted with a Gilbarco
radial meter,
as described
in variant
Model
T262Q
2.
12.
Variants
2, 5, 6 and 7 being fitted with a Gilbarco
Model T262R
4-piston
radial meter
which is similar
to the T262H meter as
described
in variant
10, but with the inlet and discharge
connections
repositioned.
13.
and variants
1, 2, 4, 5 and 7 being
The pattern
Gilbarco
Model T262-1 2-piston
in-line
meter,
variant
8.
fitted with a
as described
14.
Variant
4 being fitted with a Gilbarco
sight glass (see Figure
49).
15.
The pattern
and variants
4, 5, 6, 7 and 8 being fitted with a
Gilbarco
Model T250-4C
manual hose nozzle which is similar
to the T250-16,
as described
in the pattern,
but with a
flexible
rubber
spout.
16.
and variants
4, 5, 6, 7 and 8 being fitted with a
The pattern
Gilbarco
Model T250H manual hose nozzle,
as described
in
Variant
1.
7/5/‘69
Model
--
T261H
full-flow
in
.-
Certificate
No 5/6A/7
Page
17.
The pattern
and variants
1, 4, 5, 6, 7 and 8 being fitted with a
Gilbarco
Model T250K manual hose nozzle which is similar
to
the T250H,
as described
in variant
1, but with a flexible
rubber
spout.
18.
The pattern
with an:
19.
and variants
1, 2, 3, 4, 5, 6,
7 and 8 being
fitted
(a)
OPW 1811H or 1811HM (M-suffix
indicates
magnetic
automatic
hose nozzle
(see Figures
50 and 51).
cap)
@)
OPW 1A or 1AM (M-suffix
indicates
automatic
hose nozzle
(see Figures
(c)
STM model
and 55).
363 automatic
hose
magnetic
cap)
52 and 53).
nozzle
(see
Figures
Variants
3, 5, 6, 7 and 8 being fitted with a microswitch
actuated
through
a rod from the pump-operating
handle
place of a switch integral
with the pump motor.
54
in
20.
Variants
5, 6, 7 and 8 being fitted with a bowden cable from
the pump-operating
handle to the switch on the pump motor
in place of a rod.
21.
The pattern
and variants
1, 2, 3, 4, 5, 6, 7 and 8 having
white dial faces and black markings;
otherwise
as described
in the pattern.
22.
In which the pump motor
interlock
mechanism
in variant
2 is
replaced
by a modified
mechanism
(see Figure
56), and the
computer-reset
handle has been relocated
from the side
remote
from,
to the same side of the instrument
as the
pump-operating
handle.
When starting
the pump the computer-reset
spindle engages
a
peg and is interlocked
before
the pump motor may be started.
When stopping
the pump, the interlock,
which prevents
the
7/5/69
13
Certificate
motor
motor
handle
GENERAL
No 5/6A/7
Page
from being restarted,
is engaged when or before
is switched
off, by which time the pump-operating
has reached
the position
illustrated
(see Figure
the
57).
NOTES
Notice of approval
of the pattern
and variants
described
in this
Certificate
was given in the following
Memoranda
of Approval:
No
No
No
No
7/5/69
‘23 dated 19th October,
1966,
104 dated 4th January,
1968,
141 dated 12th December,
1968,
144 dated 19th February,
1969.
and
14
FIGURE 5/6A/? - 1
d
Gilbarco Model T337D
FIGURE 5/6A/7 - 2
Gilbarco Model T337D with Panels Removed
/-
--
----------
SIGHT
GLASS
I
‘I
VENT
NOZZLE
COMPUTER
NON- RETURN
VALVE
-
(WITH
INTEGRAL
RELIEF VALVE)
I
1
/
/
HOSE
Gilbarco
Model
T337D
Hydraulic
Diagram
,AlR
VENT
,/
FLOAT
CHAMBER
i
\~
STRAINER
OUTLET
TO METER
WEIR
STRAINER
-TO
m
/
Gilbarco
OUTLET
TO METER
SECTION
AA
T257-3 Gas Separator
INLET
and Float Chamber
FROM
PUMP
FIGURE
dilbarco
5/6A/7
T262G
- 5
Meter
FIGURE
Veeder
5/6A/7
Root 3-Wheel
- 6
Computer
FIGURE
Gilbarco
5/6A/7
TZ61M
- 7
Sight Glass
FIGURE 5/6A,‘7 - 10
SUf’f’OA
SHROUD
T
BRACKET
,HANDLE
Gilbarco Model T33 7D
Operating Handle, Interlock Position
FIGURE 5/6A/7
- 11
Gilbarco Model T338
FIGURE 5/6A/7
- 12
Gilbarco T25i’M Gas Separator
FIGURE 5/6A/7
:,,v~~-,.*,~i,,,,L:‘:j:l,,
- 13
Gilbarco T257P Float Chamber--
FIGURE 5/6A/7
- 14
Gilbarco T261N Sight Glass
FIGURE 5/6A/7
- 17
Gilbarco Model T338 with Panels Removed
FIGURE 5/6A/7
A 19
Gilbarco Model TN1
FIGURE 5/6A/7
- 20
Gilbarco T261X Sight Glass
Gilbarco Model T161 with Panels Removed
FIGURE 5/6A/7 - 22
VENT
9” II .,.*..-
I
BACK-PRESSUAE
NOZZLE
(
.l-v-.”
SIGHT
GLASS
HOSE
-L
t
I
‘tr
7%
--
FLOAT
CHAMBER
FROM-
Gilbarco
Sdj’-
Model T161 Hydraulic
J
Diagram
,
FIGURE
Gilbarco
5/6Ah
- 24
Model T162
FIGURE
Gilbarco
T257T
5/6A/7
- 25
Gas Separator
FIGURE
Gilbarco
5/6A/7
- 26
Model T162 with Panels
Removed
FIGURE 5/6A/‘i - 'Li
I
--
--
I
,.-VENT
/
.’
COMPUTER
DDO
000
rl 000
Hydraulic
Gilbarco Model T162
Diagram of One-half of Instrument
FIGURE
Gilbarco
Model
5/6A/7
- 28
T401-403,
50 inch
FIGURE
Gilbarco
5/6A/?
T261G
- 29
Sight Glass
FIGURE
Gilbarco
5/6A/?
Model
- 30
T401-403,
with Panels
Removed
50 inch
FIGURE
L
5/6A/7 - 31
d--d
If
-
MEdR
FROM
SUPPLY
HOSE!
TANK
Gilbarco Model T401-403, 50 inch
Hydraulic Diagram of One-half of Instrument
FIGURE 5/6A/7 - 32
-
-SUPPORT
BRACKET
MOTOR
OPERATING
HANDLE
Gilbarco
Operating
Model T401-403, 50 inch
Handle, Interlock Position
Epex Model 694-O
FIGURE 5/6A/7
Epex EP661-0
- 34
Sight Glass
FIGURE 5/6A/7 - 36
I
1
VENT
SIGHT
GLASS
IX
I--
7
III
---
WI
HOSE
BACK/
PRESSURE
VALVE
VALVE
FROM
SUPPLY
TANK
Epex Model 694-O Hydraulic
Dialgram
)
FIGURE 5/6A/7 - 37
Epex Model 696-O
FIGURE 5/6A/7 - 38
OUTLET
TO
METER
Epex 705/O Gas Separator
VENT
hAIR
LIQUID
RETURN
VALVE
FLOAT
LIQUID
RETURN
w
GAS
FROM
II
AND
GAS
LIQUID
SEPARATOR
/
Epex 5586 Float Chamber
.- -....-
IO PUMP
-
!&c. I 18
‘I “T’ON
Epex Model 696-O with Panels Removed
.
FIGURE 5/6A/7 - 40
\COMPUTE
METER
\I
R
I
FLOAT
GAS
FROM
SUPPLY
TANK
Epex Model 696-O Hydraulic
Diagram
FIGURE 5/6A/7
- 41
Epex Model 695-O
FIGURE 5/6A/7
- 42
Epex Model 695-O with Panels Removed
FIGURE 5/6A/7 - 43
NOZZLE
COMF’UTER
BACK
PRESSURE
VALVC
METER
HOSE
GAS
SEPARATOR
NON-RETURN
VALVE (WITH
INTEGRAL
VALVE)
FROM
SUPPLY
Epex Model 695-O Hydraulic
TANK-
Diagram
RELIEF
FIGURE 5/6A/7
- 44
Epex Model 694-60
-
FIGURE 5/6A/7
- 45
Gilbarco T262-1 Meter
-_
-
FIGURE 5/6A/?
- 46
~
-)
Epex Model 694-80 with Panels Redoved
FIGURE
5/6A/7 - 47
VENT
COMPUTE: R
--
NON
we
--
I
RETURN
v4dvE WITTY
INTEGRAL
w
VALVE)
FROM
SUPPLY
TANK
Epex Model 694-80 Hydraulic
Diagram
FIGURE 5/6A/7 - 48
OPERATING
HANDLE
FINGER
PLATE
HOSE
NOZZLE
SUPPORT
Operating
Epex Model 694-80
Handle, Interlock Position
BRACKET
FIGURE
Gilbarco
5/6A/7
T261B
- 49
Sight Glass
”
,,
s
?
-a
FIGUIiE
S/GA/7 - 57
in MAX
C
1
II
13 in MAX
9
----I
1
la inMIN
MIN
Nozzle
Hang-up Arrangement
I
in MAX
FIGURE 5/6A/7 - 58
PATTERN
COMPONENTS
(symbols P for pattern
and VI etc. for variants
refer to text)
P)
GM
Separators
Float
Chambers
Gilbarco T257-3
Gilbarco T257M
Gilbarco T257T
[ Epex 705/O
[
Gilbarco T257P
Gilbarco T257N
Epex 5586
X
X
X
X
V5
V6
v7
V8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
(V3)
X
0’6)
T261M
T261N
T26lG
T261H
T261X
661-O
(P)
IF!)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
t-w
:5,
(vu
w7)
(VW
CVW
0’18)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
(VW
@mnp motor)
Bowden cable to motor switch
Grey
[ white
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
(VW
Kl)
Pump motor interlock - modified
X
(v5)
PI
Gilbarco T250-16
Gilbarco T250-4C
Gilbarco T250H
Gilbarco T250K
OPW 1811 H
OPW 1A
STM 363
X
(v4)
(v14)
Pw
Dial
Faces
X
(VW
Hose - t inch bore up to 12 ft 6 in
Microswitch
V4
O“3)
Back pressure valve
(for by-pass sight glass)
Nozzles
v3
ASSEMBLIES
3-Wheel
Non-return valve with integral
relief valve
Sight
Glasses
v2
(V3)
(W
Gilbarco
Gilbarco
Gilbarco
Gilbarco
Gilbarco
I Epex EP
Vl
79
09)
(VW
Computer - Veeder-Root
(manual reset)
P
X
P)
cv9)
(VW
Meters
AND VARIANTS
X
X
X
X
X
X
X
X
X
(VW
(X indicates compatibility
X
X
of components with assemblies)
Aide Memoirc!