Dallas Machine Comapnay

DALLAS MACHINE COMPANY
GEAR & TOOL ROOM
503 E. LONG AVENUE - GASTONIA, NC 28054
TUESDAY, APRIL 3RD @ 10:00 A.M. EST
Inspection: MONDAY, APRIL 2ND FROM 8:00 A.M. – 4:00 P.M. EST
1 OF 2
EXCELLENT
WARNER & SWASEY MODEL 3A TURRET LATHE
GOULD & EBERHARDT GEAR HOBBER
94”
CENTERS
40”
SWING
NILES ENGINE LATHE 40” SWING OVER BED 22’ CENTER DISTANCE
CINCINNATI 20” X 94” CYLINDRICAL GRINDER
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
European Headquarters
Unit 7, Branxholme Industrial Estate, Bradford Road,
Brighouse, West Yorkshire, HD6 4EA, England, UK
Tel 1484.401.906 Fax 1484.715.327
[email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5
Tel 902.852.5331 Fax 704.821.4325
[email protected]
AUCTION SALE DATE & TIME – TUESDAY, APRIL 3RD @ 10:00 A.M. EST
GEAR MACHINERY
(2) GOULD & EBERHARDT Gear Hobber with 14” Capacity with
Tail Stock, 24” without, 5” Diameter Hob Capacity with Change
Gears, sn:9313805 & sn:49646
FELLOWS Model 7A High Speed Gear Shaper with Approximately
10” Diameter Capacity
GOULD & EBERHARDT Gear Hobber with 14” Diameter Capacity,
Holds 4” Maximum Hob, sn:2189
FELLOWS Vertical Gear Tester with 12” Diameter Maximum, Inch /
Metric, sn:28376
GOULD & EBERHARDT Gear Hobber with 26” Capacity with
Tailstock, 36” without, 6” Diameter Hobber Capacity, Change Gears
FELLOWS Horizontal Gear Tester with 8” Maximum Diameter,
Measures Gear Teeth Inch/Metric
BARBER COLEMAN Model 10x12 Gear/Hobber Sharpener with
10” x 12” Capacity, Grinding Wheel, Diamond Dresser, Index
Plates, Feed Gears
(2) FELLOWS Model 7A High Speed Shaper, 10” Diameter
Capacity, sn:28797
(2) EX-CELLO Model 602 Vertical Milling Machine with 9” x 42” TSlotted Table, 85-4000 RPM, Ex-Cello SCR Power Feed,
sn:6029024 & sn:10326
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slotted
Table, 80-2720 RPM, Table Power Feed, Dual Collet Holders,
sn:73734
SUPERMAX Model YC-1-1/2 VS Vertical Milling Machine with 9” x
42” T-Slotted Table, Variable Speeds, 60-4200 RPM, 2 HP,
sn:039041
BRIDGEPORT Model 32172 Vertical Milling Machine with 9” x 42”
T-Slotted Table, 80-2720 RPM, Table Power Feed, Dual Collet
Holders
CINCINNATI Model 3 Heavy Duty Vertical Milling Machine 16-1/2” x
60” T-Slotted Table, 19-335 RPM, sn:F625B
CINCINNATI Tool Master Vertical Milling Machine with Variable
Speeds, 10” x 43” T-Slotted Table, Sorgon DRO, 2 HP, Power
Table Feed, sn:6JC5F30868
FELLOWS Red Liner Vertical Test Machine, sn:28370
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slotted
Table, Table Power Feed, sn:126619
SUPERIOR HONE Model HM, sn:2200-B-194
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slotted
Table, Riser Block, Variable Speeds, 60-4200 RPM, sn:131375
HONES
SUPERIOR HONE Model HM with Tooling, sn:2200-B-169
SUNNEN HONE Model 666 with 300-450 RPM, Tooling, sn:65581
HORIZONTAL & VERTICAL
BANDSAWS
DOALL Model C-1220A Automatic Horizontal Bandsaw with 20” x
18” Capacity, Clamping, 44” Power Conveyor, 2” Blade Width, 186”
Band Length, sn:402-81127
WILTON Model 3535 Horizontal Bandsaw with ¾” Blade
Want to Sell
Your Shop or
Know
Someone
Who Does?
Call Us Toll
Free at
(888) 8004442! We
Pay Great
Finder’s
Fees!
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slotted
Table, Variable Speeds, 2 HP, Table Power Feed, sn:BR31966
BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slotted
Table, Variable Speeds, 60-4200 RPM, Table Power Feed,
sn:120389
Horizontal Milling Machine Model 2MH with 10” x 55” T-Slot Table,
23-1200 RPM, sn:5A2P1E-1
DRILLS
ARBOGA Model GB1830 Radial Arm Drill with 24” x 20” Adjustable
T-Slot Table, 2 HP, 2’ x 8” Column, Slotted Base, sn:122266
DAKE JOHNSON Model JH10 Horizontal Bandsaw with 10” x 18”
Capacity, Clamping, 1” Blade, sn:75844
WILTON Model 2-045 Floor Type Drill Press with 25” x18” T-Slotted
Table, 80-1200 RPM
RACINE Horizontal Hacksaw with 10” x 20” Capacity, 10’ Feed
Table, Clamping, Coolant, 2” Blade, sn:90.130.80
POWERMATIC Model 1200 Floor Type Drill Press with 20” x 20” TSlotted Table, sn:120V307
RUSCH Model HBSA1 Horizontal Bandsaw with 10” x 12” Capacity,
Clamping, 3’ Entry Conveyor, sn:42-254
ROCKWELL Manual 4 Spindle Drilling Machine with 8’ Solid Steel
Table
JET Model JWBS-14 Vertical Bandsaw with 15” x15” Table,
sn:5107893
DAKE Model SXC Vertical Bandsaw with PERMA Work-A-Matic,
28-3/4” x 18” Solid Table, sn:204086
MILLING MACHINES
(2) BRIDGEPORT Vertical Milling Machine with 9” x 42” T-Slotted
Table, 80-2720 RPM, Table Power Drive, sn:J116697 & sn:213296
MILLPORT Model 3Y Vertical Milling Machine with 9” x 42” TSlotted Table, Variable Speeds, 2 HP, Power Drawbar, Table Power
Drive, Collet Holders, sn:811295
SUPERMAX Model YC-1-1/2 VS Vertical Milling Machine with 9” x
42” T-Slotted Table, Variable Speeds, 60-4200 RPM, 2 HP, Table
Power Feed, sn:039145
2
ENGINE LATHES
NILES Engine Lathe with 40” Swing Over Bed, 22’ Center Distance,
30” 4-Jaw Chuck, Tailstock, Inch Threading, Steady Rest, sn:22217
AMERICAN PACEMAKER Model 20x48 Engine Lathe with 26”
Swing Over Bed, 48” Center Distance, 16” 3-Jaw Chuck, 2 ¼” Thru
Hole, Tailstock, Chip Pan, Inch Threading, 20-1200 RPM, Tool
Holder
MONARCH Engine Lathe with 18” Swing Over Bed, 48” Center
Distance, Inch Threading, Tool Holder, Tailstock, Chip Pan,
sn:000742
CLAUSING Model 5913 Engine Lathe with 8” 3-Jaw Chuck,
Tailstock, Cross Slide, Tool Holder, Taper Attachment, 13” Swing
Over Bed, 42” Center Distance, Inch/Metric Threading, Chip Pan,
52-2000 RPM, sn:509798
MACHINERY INSPECTION DATE & TIMES – MONDAY, APRIL 2ND FROM 8:00 A.M. – 4:00 P.M. EST
TURRET LATHES
WARNER & SWASEY Model 3A Turret
Lathe Lot 64 / M3500 with 26” Swing Over
Bed, Square Head, 21” 3-Jaw Chuck,
Coolant, 6 Station Turret, 4 7/8” Thru Hole,
Chuck Guard, Chip/Coolant Pan,
sn:2345549
WARNER & SWASEY Model 1A Turret
Lathe Lot 21 / M3400 with 16” Swing Over
Bed, Square Head, 12” 3-Jaw Chuck,
Coolant, 6 Station Turret, 3 ¼” Thru Hole,
Chuck Guard, Chip/Coolant Pan,
sn:1729408
WARNER & SWASEY Model 4ATurret
Lathe Lot 124 / M1500 with 29” Swing Over
Bed, 24” 3-Jaw Chuck, Coolant, 6 Station
Turret, 3 ¼” Thru Hole, Chuck Guard,
sn:1244445
ACME Turret Lathe Lot 577 with 18” Swing
Over Bed, 15” 4-Jaw Chuck, 6 Station
Turret, 3 ¼” Thru Hole, Cross Slide,
sn:7911
GRINDERS
CINCINNATI 20” x 94” Cylindrical Grinder
with Quick Count Acu-Rite DRO, Coolant,
Pickfeed, Dynamic Braking, Inches per
Minute, Tailstock, 32” Diameter x 3”
Grinding Wheel, 94” Length Capacity with
Filter
LANDIS Model 10x24 Type C Universal
Cylindrical Grinder with 10” x 24” Capacity,
12” x 1-1/2” Thick Grinding Wheel, sn:19221
NORTON 7” x 28” Cylindrical Grinder with
18” Diameter x 1-3/4” Wheel
THOMPSON Hydraulic Surface Grinder with
24” x 48-3/4” Magnetic Chuck, Power
Downfeed, 20” Diameter x 4” Thick Grinding
Wheel, sn:4C646867
THOMPSON Model 1 Type B Hydraulic
Surface Grinder 7 ½” x 24” Magnetic Chuck,
12” x 12” x 24” Capacity, sn:B514338
SUMMIT Tool Grinder with 14” Capacity
K.O. LEE BAH860 Surface Grinder 20-1/2”
x 3-1/2” Capacity, T-Slot Table, sn:5101
YUASA Model RX614 Surface Grinder with
6” x 12” Magnetic Chuck, sn:61216
SPARE MAGNETIC
CHUCKS
(2) 24” x 72” Magnetic Chucks
24” x 48” Magna Lock Corp Magnetic Chuck
CNC VERTICAL
MACHINING CENTER &
BARFEED
FADAL Model 914-15 CNC Vertical
Machining Center with 48” x 16” T-Slotted
Table, 21 ATC, 40 Taper, Coolant, FADAL
CNC 88HS Control, sn:9608202, mfg.1996
HAAS VF-2 CNC Vertical Machining Center
with X-Axis Travel 30”, Y-Axis 16”, Z-Axis
20”, 20 Station Tool Holder, 40 Taper, 7500
RPM, Wired for 4th Axis, sn: 3347
LNS
Quick
Load
Barfeed
with
Approximately 6’ Capacity, Hand Control,
sn:18553
KEYSEATER
LINCOLN Model AC225/DC210/6 Weld
Power with Weldan Power AC/DC,
sn:A1099536R
FORKLIFTS
TOYOTA Model 03-3FG35
7000lb
Capacity Forklift with Side Shift, LP, 3 Mast,
Solid Tires, 48” Forks, New Seat
YALE Model GLC050DENUAEO83 4800lb
Capacity Forklift with Side Shift, LP, Hard
Tires,
Dual
Mast,
41”
Forks,
sn:A823N02260T
TRACTOR
KUBOTA Model L4200 Tractor with Glide
Shift Transmission, Heat and Air in Cab,
Lights, Stereo, 4 Wheel 4 x 4, Front End
Loader Model 2345QT & Grader, 1286
Hours
VERTICAL SLOTTER
PRATT & WHITNEY Model B 6” Vertical
Gear Machine with 40” Cross x 36” Wide,
Manual Rotary Table
MISCELLANEOUS
MACHINERY
MITTS & MERRILL Model 3A Keyseater, 3
HP
CLEMCO Dry Blast Cabinet, sn:410
DAVIS Model 4 Keyseater, sn:4-1053
STONE Chop Saw with Clamping
PRESS BRAKE & SHEAR
Universal Portable Vacuum Pump
HEIM Model 100-12 100 Ton x 12’ Overall
Length Press Brake with Manual
Backgauge, 10’ – 4-1/2” Between Housing,
sn:1672
PATTON’S 15 HP Air Compressor
STEELWELD Model 4B8 Mechanical
Shear, ¼” x 9’ Capacity, Mild Steel, Remote
Foot Pedal, sn:M4335
WELDING
MILLERMATIC 300 Wire Welding Power
Source, sn:LC304331
MILLER Model Dynasty 300 SD Portable
Welding Power Source, sn:LB039588
MILLER Dimension 400 Welding Power
Source with Miller Wire Feed, sn:KC189792
MILLERMATIC 210 Portable
Power Source, sn:LC107061
Welding
MISCELLANEOUS
Carbide Tool Grinder, 6” x 9” Belt Disc
Grinder, BALDOR Grinder, Cold Saws,
Large Pedestal Floor Tool Grinder, (3)
Cherry Pickers, Blower, Blue Tool Grinder,
Drill Press, JONES & LAMSON Optical
Comparator, Diesel Portable Heaters
100,000 BTU & 150,000 BTU, (2)
ROCKWELL / WILSON Hardness Testers,
Large Qty of Miscellaneous New Exercise
Equipment, Pallet Jacks, Dollys, Hand
Tools, Drill Bits, Shelving, Reamers, Taps,
Files, Welding Supplies, Buckets, Chain,
Punches, Broaches, Dry Rod, Fire
Extinguisher, Portable Scale, File Cabinets,
Ladders, Fans, Furniture, Desks, Chairs,
Paintings, Phones, Tables, Pumps
3
WWW.ASSET-SALES.COM
AUCTION SALE DATE & TIME – TUESDAY, APRIL 3RD @ 10:00 A.M. EST
Visit Our Website to View a Calendar of Additional Upcoming Industrial Machine Auctions! www.asset-sales.com
4
MACHINERY INSPECTION DATE & TIMES – MONDAY, APRIL 2ND FROM 8:00 A.M. – 4:00 P.M. EST
ABBREVIATED TERMS & CONDITIONS OF AUCTION
Subject to amendments and modifications
announced by the auctioneer at the time of
the auction, any person participating in the
auction shall be bound by the following
terms and conditions.
The auctioneer
does
not
warrant
the
accuracy,
authenticity, description, weight, count or
measure of any listings specified herein.
All articles will be sold to the highest
bidder conforming to the bid process in
accordance to the AUCTIONEER’S TERMS
& CONDITIONS – COMPLETE COPIES
AVAILABLE
AT
WWW.ASSET-
SALES.COM. No article shall be removed
unless paid in full and all articles
purchased shall be removed in the time
allocated by the auctioneer. No item, no
matter how small or how far the purchaser
has to travel, may be removed until the
close of the auction sale.
All payments shall be by way of cash,
certified check, wire transfer and/or a
company check accompanied by a bank
letter of guarantee payable to Asset Sales,
Inc. All bidding and invoicing will be in US
Dollars ($). All bidders are responsible for
all applicable taxes.
Rigging/ Removal of sold equipment is the
sole responsibility of the buyer and must
be completed by the posted date.
Rigging/Removal may not begin until
payment has been made in full and the
auction sale is complete. All heavy rigging
will require a certificate of insurance for
$1,000,000.00 naming Asset Sales, Inc. as
the insured.
ALL SALES ARE FINAL, ON AN “AS IS –
WHERE IS,” “IN PLACE,” “WITH ALL
5
FAULTS” BASIS.
A 13% Buyer’s Premium will apply to all onsite
purchases and a 16% Buyer’s Premium for online
purchases.
REGISTRATION & BIDDING ONLINE:
If you plan to bid with Bidspotter.com, you must be
pre-approved by Asset Sales, Inc. The pre-approval
process is easy, but necessary. Asset Sales, Inc.
will verify telephone number and confirm agreement
to the Terms and Conditions.
Anyone outside of the continental United States will
be required to wire transfer a minimum deposit of
$5000 to be approved for all non-onsite bidding.
Asset Sales, Inc.
Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com
Asset Sales, Inc. – North Carolina License # 6003
3
AVAILABL
E
FADAL MODEL 914-15 CNC VERTICAL
MACHINING CENTER
Visit our website at www.asset-sales.com to view all of our
Upcoming Auctions, Download Complete Brochures, or to
Register to Bid Online.
Want to join our mailing list? Want to be included in
Email Blasts announcing future auctions? Want to
update your address? Curious to preview machines and
tooling featured in an upcoming auction? Want to
request a brochure? Or want to be removed from our
mailing list?
Just write the info on the back cover of this
brochure and email or fax it to us at:
[email protected] or (704) 821-4325
UPCOMING AUCTIONS
TUESDAY, MARCH 27TH – Allstate Diversified Products
CNC Fabricating & Stamping Facility – Syracuse, NY
TUESDAY, MAY 15TH – Tri-America Contractors
Structural Steel Fabrication – Ironton, OH
1286
HOURS
DIRECTIONS – FROM CHARLOTTE DOUGLAS INTERNATIONAL AIRPORT
Take I85 South toward Gastonia, to Exit
Hwy 19.
Merge onto N. Carolina 7 W/E Ozark Ave. West.
“LYNYRD
SKYNYRD”
Plant will be on your left. Follow
auction signs.
MILWAUKEE
IRON STREET SURVIVOR
HOTELS
COURTYARD BY MARRIOTT GASTONIA
HAMPTON INN CHARLOTTE - GASTONIA
HOTEL
1856 Remount Road
Street Address 1859 Remount Road
Gastonia, NC 28054
Gastonia, NC 28054
City, State Zip Code
(704) 852-4411
(800) 673-1723
Telephone Number
PUBLIC AUCTION
DALLAS MACHINE CO.
GEAR & TOOL ROOM
KUBOTA MODEL L4200 TRACTOR W/GLIDE SHIFT
TRANSMISSION
GASTONIA, NC 28054
TUESDAY, APRIL 3RD @ 10:00 A.M. EST