OVEN CONTROLLED CRYSTAL OSCILLATOR

OVEN
OVENCONTROLLED
CONTROLLEDCRYSTAL
CRYSTALOSCILLATOR
OSCILLATOR
AOCJY5 Series
Pb
RoHS
Compliant
36.1x 27.2 x 13mm
| | | | | | | | | |
| | | | |
APPLICATIONS:
• 36.1x 27.2 x 13mm Leaded- RoHS Compliant Reflow-able Package
• COTS Military & Industrial Radios & Timing Circuits
• SC-Cut, High “Q” resonator based design
• Cellular Infrastructure
• Radar Systems
• Sinewave output into 50Ω
• Test & Measurement Equipment
• Available with ± 50 ppb accuracy over -55°C to +85°C temperature range
• GPS Tracking with precision hold-over accuracy
• Exceptional long-term Aging of ±500 ppb max. over 10-Year Product Life
• Excellent close-in phase noise (-145 dBc/Hz Typical @1kHz offset; 10MHz carrier) • WiMax / WLAN
FEATURES:
STANDARD SPECIFICATIONS:
Parameters
Minimum
RF Output
Frequency
Standard Available Frequencies
Waveform
Peak Power
Output Load
Short Term Stability
Operating Temperature Range
Typical
Maximum
10.00
10.00 MHz
Sinewave
7.00
50
-10
1x10
-55
Units
Notes
MHz
dBm
Ω
/second
+85
ºC
±50.00
ppb
±100.00
ppb
±1.00
ppb
±1.00
ppb
±100.00
ppb
Power Consumption @ turn on
Power Consumption Steady State
6.00
2.00
Watts
Watts
Power Consumption Steady State
Supply Voltage (Vdd)
Storage Temperature Range
Aging
Daily
First Year
10-Years
5.00
12.60
+100
Watts
Volts
ºC
±1.0
±100
±500
ppb
ppb
ppb
-70
-30
dBc
dBc
Alan Variance
Frequency Stability
-55º C to +85ºC
As received frequency @ 25°C ±3°C
Frequency Stability vs. Supply
Voltage (Vdd ± 5%)
Frequency Stability vs. Load
Variation (± 10%)
Warm-Up @ 25 ºC
Spectral Content
Spurious Response
Harmonics
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
11.40
-55
12.00
@ Vc=2.50Volts
In < 3-minutes
Over operating
temperature range
@ 25°C ±3°C
Over operating
temperature range
(-55°C to +85°C)
Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.24.11
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY5 Series
Pb RoHS
Compliant
36.1x 27.2 x 13mm
| | | | | | | | | | |
| | |
STANDARD SPECIFICATIONS - continued.
Parameters
Phase Noise (10MHz Carrier) @ 12V
@ 1
Hz offset
@ 10
Hz offset
@ 100
Hz offset
@ 1,000 Hz offset
@ 10,000 Hz offset
Minimum
Typical
@ 100,000 Hz offset
Electrical Frequency Adjustment
Control Voltage Range (Vc)
Frequency Pull Range
Frequency Pull Slope
Control Voltage Port Impedance
Center Control Voltage
Control Port Linearity
Reference Voltage (Vdd=12.0V)
Storage Temperature
0.0
±0.500
Maximum
Units
-90
-120
-140
-145
-150
dBc
dBc
dBc
dBc
dBc
-152
dBc
5.00
Volts
ppm
Notes
Positive
100
2.40
4.90
-40
TYPICAL PHASE NOISE PERFORMANCE @ 10MHZ CARRIER
2.50
5.00
2.60
±10
5.10
+100
kΩ
Volts
%
Volts
ºC
Output @ Pin#2
OPTIONS AND PART IDENTIFICATION
(Left blank if standard)
AOCJY5 -
MHz
Frequency in MHz
Such as; 10.000 MHz
By default, AOCJY5 OCXO is constructed with the following key
specifications:
i)
ii)
iii)
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
Supply Voltage
Operating Temperature Range
RF Output
=
=
=
12.00 Volts
-55°C to +85°C
Pure Sinewave into 50Ω
Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.24.11
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY5 Series
RoHS
Pb
Compliant
36.1x 27.2 x 13mm
| | | | | | | | | | | | | | |
OUTLINE DIMENSIONS
12 pcs/tray
PACKAGING:
REFLOW PROFILE:
TS max to T L (Ramp-up Rate)
3°C/second max.
Preheat
Temperature Min. (T
Min.)
S
Temperature Typical (T
Temperature Max. (T
S
S
150°C
Typ.)
175°C
Max.)
200°C
Time (t S )
Ramp-up rate (T
60 ~ 180 seconds
L
to T p )
3°C/second max.
Time Maintained Above:
--Temperature (T
L)/Time
Peak Temperature (T
(T L)
217°C/60 ~ 150 seconds
p)
Target Peak Temperature (T
250°C max. for 10 seconds
p
Target)
Time within 5°C of actual peak (t
Ramp-down Rate
Tune 25°C to Peak Temperature (t)
p)
250°C +0/-5°C
20 ~ 40 seconds
6°C/second max.
8 minutes max.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
Revised: 07.24.11
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale