2016 Fresh Water_RD3NP.indd

FRESH WATER
HOSE ACCESSORIES, INLETS, STOPPERS, STRAINERS, TANK HEATER
2016 | Prices and specifications are subject to change without notice
710
Threaded
Stopper
- Stopper has female threads
- For use with Part No. 184030-A
10-1190 160-73-6-A
Stopper
Strainer w/
Threaded Basket
- Fits up to a 2" drain opening
- Constructed of durable plastic
- Includes: strainer, basket, foam gasket and locknut
- Basket has female threads
10-1741 95015
White
10-1742 95025
Parchment
10-1743 95035
Chrome
Tub Strainer w/
Threaded Stopper
- Fits up
to a 2" drain opening
- Constructed of durable plastic
- Includes: strainer, stopper, rubber washer and
locknut
- Stopper has female threads
10-1191 184030-A
White
Fresh Water Fill
Diverter Valve
- This unit is taking the place of
a gravity water fill on newer
units
- Diverts water from the city
water fill to the fresh water
holding tank
- Identified by the ‘blue’ operating handle
10-0812 DVF-1-A
Diverter Valve
10-0028 DVF-HB-A
Repl. Handle
Hot Water Tank
Diverter Valve
- Most commonly used for winterizing and storage
- Bypasses the water flow of
water from entering the
hot water tank
- Identified by the ‘red’ operating
handle
10-0813 DVH-1-A
Diverter Valve
10-0029 DVH-HR-A
Repl. Handle
Winterizing
Diverter Valve
- Switches water source from
normal fresh water to an antifreeze source
- Identified by the ‘white’ operating handle
09-0232 DVW-1-A
Diverter Valve
09-0002 DVW-HW-A
Repl. Handle
Tank Flush
Diverter Valve
- Diverts water from city
water inlet to holding
tank for cleaning
- Identified by the ‘black’
operating handle
11-0525 DVT-1-A
10-0031 DVT-HB-A
2016 Fresh Water_RD3NP.indd 710
Tank Flusher
Repl. Handle
Sprayer
- Creates a high pressure,
multi-directional spray to
help clean tank
- IAPMO and Canadian certified
- Must be installed no lower
than 2” from the top of the tank to meet IAPMO and
Canadian certification
11-0520 571-Sprayer-A Sprayer
Vacuum Breaker/
Check Valve
Manual Water Faucet
- Self-priming and provides constant water flow
- Requires 1-3/4" access hole
- Plumbing hook-up is not provided but uses a threaded 1/4"
MPT fitting
10-1775 97025 Manual Water Faucet
10-1776 97015 Faucet Repair Kit
12V Water Pump
- 7 LPM or 1.8 GPM of
water at 15W/1.25 Amps
12 VDC
- Inlet is a combo 1/4"
threaded or barbed application; outlet port 1/4"
- Installed between water
inlet connection and tank flusher
- Prevents harmful bacteria and
waste from entering the hose or
water supply system
- Meets IAPMO standards
- ASSE 1001-02 requires installation of 6” or more
above the highest point of any item connected to
the waste tank where the flusher is being installed
95-1954 571-Vac-Chk-A Breaker
barbed fitting
- Requires an additional switch for on/off operation or
to be wired to a switch/faucet combination
10-1770 97005
12V Water Pump
Water Inlet
- Reduces corrosion associated with tank flusher
operations
- Does not have a backflow breaker for better
water movement
- Plastic check valve body
10-1114 160-85-2PZ-A Tank Flusher
Water Inlet
- Reduces corrosion
associated with tank
flusher operations
- Does not have a backflow breaker for better
water movement
Dual Threaded Drain Cock
- Fits most OEM fresh water drain valves as well as
those mounted on the exterior walls
- Fits: 3/8" - 1/2" MPT
10-0455 03175
Drain Cock
Dual Barbed Drain Cock
- Fits most OEM fresh water drain valves as well as
those mounted on the exterior walls
- Fits: 3/8" - 1/2" barbs
10-0448 03182 Drain Cock
- Brass check valve body
10-1115 160-85-2Z-A
Tank Flusher
3-Way Brass Diverter
Valve
- 1/2" MPT x 1/2" MPT x 1/2" FPT
- Used in many plumbing applications
- Water heater bypass valves
10-1116
62245 Diverter Valve
Hose
Savers
- Lead free brass
- Prevents water hoses from crimping
- Sure tight grip for easy use
10-1118
62225 45° Hose Saver
10-1119
62235 90° Hose Saver
Water Regulators
- Hi Flow 50-55 psi
- 40-50 psi
- Lead free brass
- Provides protection to water lines and pumps
- Preset pressure outlet pressure
- Standard 3/4" hose fittings
10-1120 62215
Hi-Flow Regltr
10-1121 62205
Water Regulator
When properly installed, the RV holding tank
heater will protect the contents of a standard 15
gallon tank with a minimum of 1/2" insulation at
temperatures of 0° F.
Size Of Number Of Degree Of Protection
Tank
Heaters
Water
In Gallons Required Sewage
15
30
45
1
2
3
-5° F.
-5° F.
-5° F.
0° F.
0° F.
0° F.
Holding Tank Heater
- Used on either fresh water or septic tank
- Dual voltage ready for 12V and 110V applications
- Thermostatically controlled and active at 34° F
- Foil covered, 30" x 13" with 24" ground wire
- Draws approximately 1 Amp AC and 10 Amps DC
current when in use
- Multiple heaters may be used where needed for
tank coverage
19-1471 HTH-A
Holding Tank Heater
Horseshoe Vent
- Direct OEM replacement
- UV and impact resistant
- Resistant to road salts and acids
- Paintable
- Outside Dim: 3-3/4" w x 3-1/4" h x 3/4" d
10-1780 298-01-A-PW-A
PW
11/21/15 4:32 PM