TABLE OF CONTENTS
AQUARIUM FILTERS
AquaStep® PRO UV Sterilizer
Commercial Cartridge Filters
Fluidized Bed Filters
Horizontal Modular Kits
Lifegard® Filter Modules
M-Series Commercial
Modular System Packs
Lifegard® Modular UV Sterilizers
Sand Filters
WOW™ Multi-Function Filter
PUMPS
23-24
34
27
Price List
18-21
21, 34
22
20-21
34
25-26
AQUARIUM
ACCESSORIES
Algae Pads
AquaMesh™ Media
BioMate® Media Balls
Bonded Filter Pad
Cartridges
Carbon, Pelletized Activated
CustomFlo® Water System
Digital Thermometers
Fish Feeder w/Hopper
Intelli-Feed
Scratch Removal Kit
Scrubbers
Service Cart Parts Kit
Test Strips
Underwater River
UV Bulbs
Refer to Price List for Replacement Parts
30
28
28
28
31
28
32-33
29
29
3-4
30
31
36-37
29
31
21
FITTINGS AND VALVES
Air Pumps w/wo LED
Caged Pond Pumps
Commercial Self-Priming
2-Speed Pumps
Dirty Water Submersible
Lifegard® Quiet-One®
PRO Series Aquarium Pumps
PRO Series Fountain Pumps
PRO Series Pond Pumps
Lifegard® Quiet-One® Original Series
Aquarium & Pond Pumps
Utility Pumps
Waterfall Pumps
30
41
35
35
42
5-8
9-12
Bulkhead Fittings
Fittings, Adapters, Valves
31
31
POND FILTERS
All-In-One® Submersible
Tarpon Sand Filter System
Uno, Duo, Trio® Filters
Uno, Duo, Trio® Filter/Pump Kits
38-39
34
40
40
POND ACCESSORIES
Air Pump
13-16 Brushes, Nets, Skimmers
Leaf Eater®
17
Min-Vac®
42
Telescopic Poles
42
Test Strips
Thermometers
43
43
43
43
43
29
43
Warranty Policy
 Warranty period starts from date of purchase and must be validated with copy of original purchase receipt.
 Warranty requests by phone will not be honored.
 Warranty items returned without copy of original purchase receipt will not be honored.
 All items must first be returned to Lifegard Aquatics for inspection, evaluation, and processing to determine
if product qualifies for warranty replacement or repair. No warranty (repair, replacement, or credit) will be
issued prior to inspection of product. Please contact us first for warranty assistance. Many times the product
can be repaired without the cost and time involved in sending it back to us. If absolutely necessary, return
product freight prepaid to the following address for warranty evaluation and processing.
Lifegard Aquatics
13911 Struikman Road, Cerritos, CA 90703
Tel: (562)404-4129 Fax: (562)404-4159 Email: [email protected]
 3 year warranty from date of purchase on Quiet One Pump Motors Only.
 60 day warranty from date of purchase on Shafts and Impellers for All Types of Pumps.
 60 day warranty from date of purchase on all Ultraviolet Bulbs.
 60 day warranty from date of purchase on all Test Strips.
 1 year warranty from date of purchase on All Other Products.
See price list for further descriptions
2
INTELLI-FEED AQUARIUM FISH FEEDER
Designed to keep moisture
out of food container...
for trouble free operation.
Sealed container moves forward... rotates and
drops desired amount of food... returns back into
housing... keeps moisture out
and food dry.
Automatic and Digitally Controlled.
 Program up to 12 daily feedings depending
on the number of fish in aquarium.
 Manually push SET button to feed
at anytime.
 Operates on 4 AA batteries or optional
6V power adapter.
 Includes Tank Mounting
Bracket and Rubber Feet.

3
INTELLI-FEED AQUARIUM FISH FEEDER
Sealed Food Container F E AT U R E S :
 Pre-programmed for 2 feedings per day,
with possible settings of up 12 feedings daily,
depending on the number of fish in your aquarium.
 Manually push SET button to feed at anytime.
 Sealed container moves forward, rotates
and drops desired amount of food,
returns back into housing...
keeping moisture out and food dry.
 Easy to program digital keyboard
with LCD display.
Slider controls desired amount of food.
A
Aquarium Mounting Bracket
B
C
D
E
F
G
I
(Not included, sold separately)
H
Optional Power Adapter (R440951)
PARTS BREAKDOWN
Components Description
Lifegard Part #
UPC#
A
B
C
D
E
F
G
H
I
(Not a replacement part)
R440952
R440953
R440954
R440955
R440956
R440957
R440958
R440951
788379314101
788379314118
788379314125
788379314132
788379314149
788379314156
788379314163
788379314095
Feeder motor housing
Battery compartment cover
Food container
Slider for food dispensing
“O” Ring, feeder cover
Feeder cover
Adhesive feet (4)
Aquarium mounting bracket
Optional 6V power adapter
Dimensions & Capacity
Length
Width
Height
Food Capacity
4
4.53”
3.07”
3.66”
7.5 Cubic Inches
Operates on 4 AA batteries (not included)
200
400
PRO Series
AQUARIUM PUMPS
For Submersible or Dry Applications
F E AT U R E S :
 Extremely
quiet operation…so quiet
you’ll swear it’s not running.
 Safe for Salt or Freshwater applications.
 Use with all types of filters.
 ECO-SAV™ generates more power with
less energy consumption.
 Internal recirculation prevents
overheating and ejects obstructing debris.
 Remarkable impeller technology provides
combined rotors, improved shaft materials
and corrosion resistant bearings.
 EZ Access Covers allow ease of
maintenance of rotor, shaft and removable
impellers.
 Innovative “cooling chambers” provide
air-cooling during dry use and
water-cooling in wet applications.
 Pre-filter Grill with Flow Control Valve in
submersible applications.
 115 Volt/60 Hz. 220 Volt/50 Hz
models available.
 ETL and CE listed.
MODEL 200
MODEL 400
Maximum Gallons Freshwater 20
Maximum Gallons Saltwater 14
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
5
R440464
200
53
1.64
5.5
0.09
Screen
1/2” Tube
R440464
400
106
2.13
7.0
0.09
Screen
1/2” Tube
800
1200
2200
MODEL 800
MODEL 1200
MODEL 2200
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
R440101
800
220
4.37
13.5
0.24
Screen
1/2” Tube
R440102
1200
296
6.10
25.5
0.40
1/2” MPT
1/2” MPT
R440110
2200
594
10.66
45
0.46
1” MPT
1” MPT
Q1: Valve Open Q2: Valve Closed
Flow Rate calculated with flooded suction and no output restriction.
6
3000
4000
5000
MODEL 3000
MODEL 4000
MODEL 5000
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
R440103
3000
819
10.33
55
0.54
1” MPT
1” MPT
R440104
4000
991
10.17
65
0.6
1” MPT
1” MPT
R440106
5000
1400
11.65
115
1.00
1” MPT
1” MPT
7
6000
9000
14000
MODEL 6000
MODEL 9000
MODEL 14000
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
20’ 3-pin cord
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
20’ 3-pin cord
115 Volt/60 Hz
R440107
6000
1664
11.65
135
1.18
1” MPT
1” MPT
R440108
9000
2040
16.4
125
3.10
11/2” MPT
11/2” MPT
8
R440109
14000
3307
25.0
175
2.50
11/2” MPT
11/2” MPT
200
400
MODEL 200
MODEL 400
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
Part No.
Model
GPH
Max Ht. Ft.
Watt
Amp
Suction
Discharge
115 Volt/60 Hz
F E AT U R E S :
 Extremely
quiet operation…so quiet you’ll
swear it’s not running.
 For use with Fountains, Statuary or
Water Features.
 Internal recirculation prevents overheating
and ejects obstructing debris.
combined rotors, improved shaft materials
and corrosion resistant bearings.
 EZ Access Covers allow ease of maintenance
of rotor, shaft and removable impellers.
air-cooling during dry use and water-cooling
in wet applications.
 Pre-filter Grill with Flow Control Valve in
submersible applications.
 115 Volt/60 Hz. 220 Volt/50 Hz models available.
9
R440801
200
53
1.64
5.5
0.09
Screen
1/2” Tube
R440802
400
106
2.13
7.0
0.09
Screen
1/2” Tube
800
1200
2200
MODEL 800
MODEL 1200
MODEL 2200
Part No.
R440803
Model
800
GPH
220
Max Ht. Ft.
4.37
Watt
13.5
Amp
0.24
Suction
Screen
1/2” Tube
Discharge
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
Part No.
R440804
Model
1200
GPH
296
Max Ht. Ft.
6.10
Watt
25.5
Amp
0.40
1/2” MPT
Suction
1/2” MPT
Discharge
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
Part No.
R440805
Model
2200
GPH
594
Max Ht. Ft.
10.66
Watt
45
Amp
0.46
Suction
1” MPT
Discharge
1” MPT
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
10
3000
4000
5000
MODEL 3000
MODEL 4000
MODEL 5000
Part No.
R440806
Model
3000
GPH
819
Max Ht. Ft.
10.33
Watt
55
Amp
0.54
Suction
1” MPT
Discharge
1” MPT
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
Part No.
R440807
Model
4000
GPH
991
Max Ht. Ft.
10.17
Watt
65
Amp
0.60
Suction
1” MPT
Discharge
1” MPT
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
Part No.
R440808
Model
5000
GPH
1400
Max Ht. Ft.
11.65
Watt
115
Amp
1.00
Suction
1” MPT
Discharge
1” MPT
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
11
6000
9000
14000
MODEL 6000
MODEL 9000
MODEL 14000
Part No.
R440809
Model
6000
GPH
1664
Max Ht. Ft.
11.65
Watt
135
Amp
1.18
Suction
1” MPT
Discharge
1” MPT
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
Part No.
R440108
Model
9000
GPH
2040
Max Ht. Ft.
16.4
Watt
125
Amp
3.10
Suction
1 1/2” MPT
Discharge
1 1/2” MPT
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
Part No.
R440109
Model
14000
GPH
3307
Max Ht. Ft.
25.0
Watt
175
Amp
2.50
Suction
1 1/2” MPT
Discharge
1 1/2” MPT
20’ cord with
grounded plug for
indoor/outdoor use.
115 Volt/60 Hz
12
800
F E AT U R E S :
 Extremely quiet operation…so quiet
you’ll swear it’s not running.
 Internal recirculation prevents
overheating and ejects obstructing debris.
combined rotors, improved shaft
materials and corrosion resistant bearings.
 EZ Access Covers allow ease of
maintenance of rotor, shaft and removable
impellers.
air-cooling during dry use and
water-cooling in wet applications.
 Pond Models include sponge pre-filter to
protect impeller and shaft, 20’ 3-pin cord,
fittings and spray nozzles.
 Models 9000,14000 and 16000 feature
pre-filter basket.
 Model 14000 features Remote Control.
 115 Volt/60 Hz 220Volt/50 Hz models
available.
1200
MODEL 800
MODEL 1200
Maximum Gallons
Pond/Water Garden 330
Part No.
R440151
Model
800
GPH
220
Max Ht. Ft.
4.37
Watt
13.5
Amp
0.24
Suction
Sponge
1/2” Tube
Discharge
Maximum Gallons
Part No.
R440152
Model
1200
GPH
296
Max Ht. Ft.
6.1
Watt
25.5
Amp
0.40
Suction
Sponge
1
/2” MPT
Discharge
115 Volt / 60 Hz
13
2200
3000
4000
MODEL 2200
MODEL 3000
MODEL 4000
Maximum Gallons
Part No.
R440160
Model
2200
GPH
594
Max Ht. Ft.
10.66
Watt
45.0
Amp
0.46
Suction
Sponge
Discharge
1” MPT
115 Volt / 60 Hz
Maximum Gallons
Part No.
R440153
Model
3000
GPH
819
Max Ht. Ft.
10.33
Watt
55.0
Amp
0.54
Suction
Sponge
Discharge
1” MPT
115 Volt / 60 Hz
Maximum Gallons
Part No.
R440154
Model
4000
GPH
991
Max Ht. Ft.
10.17
Watt
65.0
Amp
0.60
Suction
Sponge
Discharge
1” MPT
115 Volt / 60 Hz
14
5000
6000
MODEL 5000
MODEL 6000
Maximum Gallons
Part No.
R440155
Model
5000
GPH
1400
Max Ht. Ft.
11.65
Watt
115.0
Amp
1.00
Suction
Sponge
Discharge
1” MPT
20’ 3-pin cord
115 Volt / 60 Hz
Maximum Gallons
Part No.
R440156
Model
6000
GPH
1664
Max Ht. Ft.
11.65
Watt
135.0
Amp
1.18
Suction
Sponge
Discharge
1” MPT
20’ 3-pin cord
115 Volt / 60 Hz
15
9000
14000
16000
Remote Control
Included
 Adjust Flow Rate
 On/Off Timer
 Vary Flow
Automatically
MODEL 9000
MODEL 14000
MODEL 16000
Maximum Gallons
Part No.
R440157
Model
9000
GPH
2040
Max Ht. Ft.
16.4
Watt
125.0
Amp
3.10
Suction
Pre-Filter Basket
Discharge
11/2” MPT
115 Volt / 60 Hz
Maximum Gallons
Part No.
R440158
Model
14000
GPH
3307
Max Ht. Ft.
25
Watt
175.0
Amp
2.50
Suction
Pre-Filter Basket
Discharge
11/2” MPT
115 Volt / 60 Hz
Maximum Gallons
Part No.
R440159
Model
16000
GPH
3915
Max Ht. Ft.
14.8
Watt
185.0
Amp
2.70
Suction
Pre-Filter Basket
Discharge
11/2” MPT
115 Volt / 60 Hz
16
QUIET ONE® ORIGINAL SERIES PUMPS
Original Series Aquarium Pumps
For Wet or Dry Applications in Salt or Freshwater Aquariums
 Extremely quiet operation... noise level less than 45 decibels.
 Ease of service through simple snap on/off covers and
removable magnetic drive impellers.
 Patented “Uni-Direction” impeller eliminates need for noisey mechanical device.
Allows pumps to always turn in correct direction immediately.
 High quality corrosion resistant bearings help ensure quiet operation and longer life.
 Innovative “cooling chambers” provide air-cooling during dry use and water cooling
in wet applications.
 115V 60 Hz or 220V 50 Hz models in all sizes.
Product Specifications: Quiet One Aqiarium Pumps Original Series - 115 Volt / 60 Hz / 6’ Cord / 2 Wire
Part No.
Model GPH Max Ft. Watts Amps
of Head
Suction Discharge
Max Gals. Max Gals.
Freshwater Saltwater
R440902
R440903
R440904
R440905
R440906
2200
3000
4000
5000
6000
1” MPT
1” MPT
1” MPT
1” MPT
1” MPT
220
307
372
525
624
581
713
951
1330
1653
10.1
10.17
9.68
10.35
11.5
36.0
36.0
42.0
116.0
145.0
0.54
0.55
0.69
2.60
3.20
1” MPT
1” MPT
1” MPT
1” MPT
1” MPT
150
204
248
350
416
Original Series Pond & Water
Garden Pumps
 Extremely quiet operation... noise level less than 45 decibels.
 Ease of service through simple snap on/off covers and removable
magnetic drive impellers.
 Pond models include longer cord, foam pre-filter and nozzles
for spray attachments.
 Patented “Uni-Direction” impeller eliminates need for noisey
mechanical device. Allows pumps to always turn in correct direction
immediately.
 High quality corrosion resistant bearings help ensure quiet operation and longer life.
 Innovative “cooling chambers” provide air-cooling during dry use and water cooling in wet applications.
 115V 60 Hz or 220V 50 Hz models in all sizes.
Product Specifications: Quiet One Pond & Water Garden Pumps Original Series - 115 Volt / 60 Hz / 20’ Cord / 3 Wire with Spray Attachments
Part No.
Model GPH Max Ft. Watts Amps
of Head
Suction Discharge
Max No. Gals.
Pond/Water Garden
R440922
R440923
R440924
R440925
R440926
2200
3000
4000
5000
6000
Sponge
Sponge
Sponge
Sponge
Sponge
891
1229
1487
2100
2496
581
713
951
1330
1653
10.0
10.17
9.68
10.35
11.5
36.0
36.0
42.0
116.0
145.0
0.54
0.55
0.69
2.60
3.20
1” MPT
1” MPT
1” MPT
1” MPT
1” MPT
17
LIFEGARD®
MODULAR SYSTEM
In-Line
Modular
System
R440450
Guard the life in your tank with Lifegard®
The LIFEGARD®
MODULE SYSTEM
allows you to add to your system
as your needs dictate.
Lifegard’s craftmanship and ingenuity have pioneered
d the
h most
effective and versatile aquarium filtration system ever offered for the
professional or home aquarist. The Lifegard exclusive modular design
enables you to custom design and expand your filtration system as
your needs dictate... simply by adding another module. The Lifegard
System of progressive water treatment... coupled with the Quiet One®
Pump... has been keeping salt or fresh water aquariums sparkling
clean for over 60 years.
18
Compact
Modular
System
R440455
MECHANICAL
FILTER
CHEMICAL
FILTER
HEATER
MODULE
3 SIZES AVAILABLE:

LARGE CAPACITY
CARBON CHAMBER:


Provides the most stable temperature
possible by recirculating aquarium
water continuously around heater
element.
Single Capacity for Aquariums up to 100 gallons.
Double Capacity for Aquariums up to 200 gallons.
 Triple Capacity for Aquariums up to 300 gallons.
Recommended aquarium sizes are approximate. In many
cases, single, double and triple capacity modules can be
used with great success in higher volume applications.
Single capacity filter features the Lifegard exclusive
combination mechanical and chemical
cartridge. Internal carbon chamber has
retainer screen to prevent carbon from
escaping into system. Carbon can be easily
rinsed while inside chamber. Double
and triple capacity units feature
mechanical cartridge only. Water
is forced through the filter pleats
under pressure, trapping particles
from 20 microns down to 5 microns
on the outside of the cartridge.
Economical replaceable pleats
eliminate costly cartridge
replacement. Highest quality
PVC molded parts.


LARGE HEATER
ELEMENT
CHAMBER:



Removable chamber
allows easy media
replacement and
pre-rinsing.
Carbon can be
easily prerinsed
while inside
chamber.
Holds a variety of
filter substances
such as Zeolite, Ion
Exchange Resins or
other biological
media.
Clear cap to view “On” light
of heater.
Removes unsightly and easily
damaged heater from aquarium.
Can be used as a Biological
Chamber when filled with the
proper media that provides
surface area for beneficial
bacterial growth.
 No channeling. 100% of
water passes through media.
 More than one module can be
plumbed together for different
media.
 Automatically vents
air out of unit.

IIIIIII
75
24
72
22
68
20
65
18
¡F
Overflow pipe automatically
vents air from chamber for safe
operation.
Aquarium heater is not
included with module.
Provides the most stable
temperature possible by
recirculating aquarium
water continuously around
heater element.
Chemical
Filter Flow
30
I
II
26
Heater
Module Flow
IIIIIII
0
Single capacity holds heater
12” in length.
Double capacity holds heater
22” in length.
Triple capacity holds heater
32” in length.
Compression coupling allows easy installation
and removal of heater. Accepts 1” or 3/4”
diameter aquarium heater.
II
Replacement
Cartridge Plug
for Carbon
Chamber
Access
Pleat Retainer
Carbon
Chamber
Replaceable pleat eliminates costly cartridge
Inner Pleat
replacement. Inner pleat supports prevent pleats
Support
from squeezing shut providing longer filter cycle.
Replacement
Pleats
IIII
I I 15 I I
10
20
Retainer
5
25
Screen
Single capacity holds 7.3 oz.
(207 grams) Lifegard
Pelletized Carbon.
Double capacity holds
15.6 oz. (442 grams)
Lifegard Pelletized Carbon.
Triple capacity holds
24.4 oz. (692 grams)
Lifegard Pelletized Carbon.
I
From Pump
To Aquariuim
From Pump
Manual Air Bleed eliminates
unwanted trapped air.
To Aquariuim
0-30 PSI/Bar Dial Pressure Gauge
indicates when to clean cartridge.
Water is forced through filter
pleats under pressure for
superior water quality.
No channeling. 100% of water
passes through pleats and
media within internal chamber.
Cartridge traps particles from
20 microns down to 5 microns.
Internal chamber holds 3 oz
(86 grams) of Lifegard Pelletized
Carbon. This is over 113 million
meters of surface area! Will also
hold a variety of chemical or
biological filter media.
Mechanical
Filter Flow
MECHANICAL FILTER MODULES Specifications
Part
No.
R179410
R179420
R179430
Model
No.
AF-94
AF-94-19
AF-94-29
Description
Port Size
Inlet
Individual Module 11/4” Slip / 3/4” FPT
Double Capacity 11/4” Slip / 3/4” FPT
Triple Capacity
11/4” Slip / 3/4” FPT
CHEMICAL FILTER MODULES Specifications
R179310
R179320
R179330
AF-93
AF-93-19
AF-93-29
Triple Capacity
11/4” Slip / 3/4” FPT
Outlet
1” Slip / 3/4” FPT
1” Slip / 3/4” FPT
1” Slip / 3/4” FPT
Filter Dimensions
Height* Width Depth
18”
7”
4 3/4”
3
27 /4” 7”
4 3/4”
37 1/2” 7”
4 3/4”
Aquarium
Size Up to...
100 gallons
200 gallons
300 gallons
*with gauge
1” Slip / 3/4” FPT 14”
7”
1” Slip / 3/4” FPT 23 3/4” 7”
1” Slip / 3/4” FPT 33 1/2” 7”
4 3/4”
4 3/4”
4 3/4”
100 gallons
200 gallons
300 gallons
1” Slip / 3/4” FPT 15”
7”
1” Slip / 3/4” FPT 24 3/4” 7”
1” Slip / 3/4” FPT 34 1/2” 7”
4 3/4”
4 3/4”
4 3/4”
100 gallons
200 gallons
300 gallons
From Pump
To Aquariuim
HEATER MODULES Specifications
R179210
R179220
R179230
AF-92
AF-92-19
AF-92-29
Triple Capacity
11/4” Slip / 3/4” FPT
Port size dimensions listed are pipe size. SLIP = PVC solvent socket type fittings.
Recommended aquarium sizes are approximate. In many cases, single, double and triple capacity modules can be used with great success in higher volume applications.
All slip models of Lifegard Mechanical, Chemical, Heater, and UV Sterilizers include 3/4” threaded reducing bushings in the package if threaded installation is desired.
19
ULTRAVIOLET STERILIZERS
UV Sterilizer Flow
From Pump
To Aquarium
The radiation from ultraviolet light at 2537 angstroms provided inside
the Lifegard Ultraviolet Sterilizer exerts a lethal effect on micro-organisms. UV light alters genetic material within the cells, which interrupts
respiration. UV light, when used properly, is extremely beneficial in
destroying disease causing pathogens as they pass through the unit.
UV sterilization is an effective method of disease control.
Four major factors affect the percent kill of free-floating microorganisms by UV radiation. (l) Size of organisms. (2) Radiation level.
(3) The extent to which UV rays penetrate the water and (4) Contact time
in which the micro-organism is exposed to the UV radiation.
Pure hard quartz material in the bulb dramatically increases UV output
compared to other conventional bulbs of equal wattage. Pure quartz
material resists solarization and improves the longevity of the bulb.
Unique test tube style pure hard quartz sleeve isolates the bulb from
water contact preventing thermal shock, broken glass and mercury
contamination of the aquarium. This quartz sleeve isolates the bulb to
provide an optimal bulb operating temperature of 100°F (38°C). This
higher bulb temperature increases UV output 35% over conventional
units without sleeves. Bulb changing is the easiest in the industry. Simply
slide the old bulb out and slide the new bulb in. No need to shut down
the filter system or turn off the pump. Bulb and ballast connect together
with a single 4 pin connector.
UV radiation levels can be increased by slowing down the flow rate or
increasing the total wattage in the system.
UV sterilizers are available from 15 watts up to 240 watts. Tandem
mounting will provide proper wattage for any installation requirement.
UV sterilization is most effective when used as the final stage of the
Lifegard filtration system.
It must be understood that micro-organisms reproduce exponentially.
The goal is to reduce the micro-organism population to an acceptable
level. In certain instances, the wattage may be adequate to eliminate
the pathogens flowing through the Sterilizer but the flow rate is too slow
to keep up with the total micro-organism population in the aquarium
system. In those cases, the flow rate and total wattage must be increased.
Ultraviolet sterilizers kill free floating
algae in ponds resulting in crystal
clear water.
Ease of
Replacement
Unique4-pinconnector
design for easy bulb
replacement without
shutting down the
system.
Splash Boot & Boot Cap
Creates water resistant seal around
electrical connection.
Clear View Port
Solid cap features clear view port
to allow visable light (no UV) to
pass through and indicate
bulb is operating.
Quartz Sleeve
Test tube style isolates
UV bulb from water
contact allowing it to
operate at the optimum
bulb temperature for
maximum UV output.
Highest quality pure
hard quartz material
allows maximum
UV transmission.
Compression
Coupling & Gasket
Seals quartz sleeve to cap.
Ballast
15, 25 or 40 Watt UL and
CSA listed, (230V, 50 Hz
ballast available).
Internal
Overflow Pipe
Replaceable pipe automatically
vents air from chamber and
directs 100% of the water
flow past UV light.
Inner Protective
Sleeve
Replaceable sleeve protects
outer housing from long
term UV damage. Acts as
an internal reflector
maximizing UV efficiency.
Modular
Construction
Allows simple connection
to any Lifegard Modular
filter system or outside
canister filter.
EPA Est. No. 72974-CA-1
20
UV Bulb
Highest quality pure hard
quartz material allows maximum
UV transmission and longer
bulb life. End cap wire design
drops bulb further into unit for
maximum output and keeps
heat away from sealing area.
Sleeve
Guide
Guides quartz
sleeve into
proper position
for accurate
assembly.
ULTRAVIOLET STERILIZER MODULES
LIFEGARD UV Radiation Levels
Wattage Bulb Length
15W
25W
40W
FROM
PUMP
IN
TO
AQUARIUM
SYSTEM
Average
Output
Killing Dose in
Microwatt Seconds/CM 2
( μ W • s/CM 2 )
( μW • s/CM 2)
111/2” (29.21 cm) 12,470
171/4” (43.82 cm) 15,900
311/2” (80.01 cm) 15,910
BACTERIA
Bacillus anthracis .......................................... 8,700
Bacillus megatherium sp (veg) ..................... 2,500
Bacillus megatherium (spores) ..................... 5,200
Bacillus paratyphosus ................................... 6,100
Bacillus subtilis (mixed) .............................. 11,000
Bacillus subtilis (spores) .............................. 22,000
Clostridium tetami ...................................... 22,000
Corynebacterium, Dephtheria ....................... 6,500
Dysentery bacilli ........................................... 4,200
Eberthelia typhosa ........................................ 4,100
Escherichia coli.............................................. 6,600
Micrococcus candidus.................................. 12,300
Micrococcus piltonensis............................... 15,000
Micrococcus sphaeroides ............................. 15,400
Mycrobacterium tuberculosis ...................... 10,000
Neisseria catarrhalis ...................................... 8,500
Phytomonas tumefaciens ............................. 8,500
Proteus vulgaris ............................................ 6,600
Pseudomonas aerugenosa .......................... 10,500
Pseudomonas fluorescens ............................. 6,600
Salmonella sp.............................................. 10,000
Salmonella enteritidis ................................... 7,600
Salmonella typhimurium (ave) ................... 15,200
Sarcina lutea ............................................... 26,400
Serratia marcescens ...................................... 6,160
Shigilla paradysenteriae................................ 3,400
Spirillum rubsum .......................................... 6,160
Staphylococcus albus .................................. 5,700
Staphylococcus aureus ................................ 6,600
Staphylococcus hemolyticus ....................... 5,500
Streptococcus lactis ...................................... 8,800
Streptococcus viridans ................................. 3,800
UV REPLACEMENT
BULBS
Available in
15 Watt, 25 Watt,
and 40 Watt
sizes.
OUT
QL-160
160 W Ultraviolet Sterilizer
M4
Chemical Filter
M4
Mechanical Filter
A Typical LIFEGARD Commercial Filtration System
YEAST
Saccharomyces ellipsoideus ...................... 13,200
Saccharomyces sp. ..................................... 17,600
Saccharomyces cerevisiae .......................... 13,200
Brewer’s Yeast ............................................. 6,600
Baker’s Yeast ................................................ 8,800
Common Yeast Cake .................................. 13,200
MOLD SPORES
Penicillium roqueforti ............................... 26,400
Penicillium expansum ............................... 22,000
Penicillium digitatum ................................ 88,000
Aspergillus glaucus ................................... 88,000
Aspergillus flavus ...................................... 99,000
Aspergillus niger ..................................... 330,000
Rhisopus nigricans .................................. 220,000
Mucor racemosus A ................................... 35,200
Mucor racemosus B ................................... 35,200
Oospora lactis ............................................ 11,000
VIRUS
Bacteriophage (E. coli) ................................ 6,600
Tobacco Mosaic ....................................... 440,000
Influenza ..................................................... 3,400
PROTOZOA
Paramecium ............................................ 200,000
Nematode Eggs ......................................... 92,000
Chiorella vugaris (algae) ........................... 22,000
FUNGI ..................................................... 45,000
ULTRAVIOLET STERILIZER MODULE Specifications
Part
No.
R177080
R177250
R177300
R177300C
R177300B
R177304A
R177300B
Model
No.
QL-15
QL-25
QL-40
QL-80
QL-120
QL-160
QL-120
Description
15 Watt UV Module
25 Watt UV Module
40 Watt UV Module
80 Watt UV Module
120 Watt UV Module
160 Watt UV Module
120 Watt UV Module
Port Size
Filter Dimensions
Inlet
Outlet
Height
1 1/4” Slip / 3/4” FPT
1 1/4” Slip / 3/4” FPT
1 1/4” Slip / 3/4” FPT
1 1/4” FPT
1 1/4” FPT
2” Slip
2” Slip
1” Slip / 3/4” FPT
1” Slip / 3/4” FPT
1” Slip / 3/4” FPT
1 1/4” FPT
1 1/2” FPT
2” Slip
2” Slip
17”
26 3/4”
34 1/2”
45 1/4”
45 1/4”
45 1/4”
45 1/4”
* Higher flows will result in reduced effectiveness; however, this reduction is not directly proportional to the
NOTES: 230V 50Hz models available on special
increased flow. For example, the QL-40 was tested at 1500 GPH and produced a 99.33% reduction in bacteria
request (add “E” after part no.).
(E. coli). Increasing the flow 25% to 2000 GPH decreased the effectiveness to 97%, a reduction of only 2.33%.
SLIP = PVC solvent socket type fittings
** Port size dimensions listed are pipe size.
21
Maint.
Clear.
7”
4 3/4” 27”
7”
4 3/4” 42 3/4”
7”
4 3/4” 64 1/2”
6”
15 1/4” 75 1/4”
6”
22”
75 1/4”
11 3/4” 18”
75 1/4”
11 3/4” 24”
75 1/4”
Width
Depth
Maximum
Flow Rate
Up to 240 GPH
Up to 760 GPH
Up to 1500 GPH
Up to 3000 GPH
Up to 4500 GPH
Up to 6000 GPH
Up to 9000 GPH
All slip models of Lifegard Mechanical, Chemical, Heater, and UV Sterilizers include
3/4” threaded reducing bushings in the package if threaded installation is desired.
LIFEGARD SYSTEM PACKS
Complete Pre-assembled Modular Systems
ready to go in two configurations...
COMPACT SYSTEM
R440455
IN-LINE SYSTEM
R440450
BOTH VERSIONS INCLUDE:








Quiet One 4000 High Head Pump
(951 GPH)
AF 94 Mechanical Filter
AF 93 Chemical Filter
AF 92 Heater Module
QL 8 UV Sterilizer
Complete Customflo Water
System Kit
Union Shut Off Valves
and Power Drain
Fresh or Salt Water Aquariums
up to 100 Gallons
CUSTOMFLO
WATER
SYSTEM
Assemble parts in
multiple ways to
create desired
flow patterns.
22
AQUASTEP® PRO UV STERILIZER
LIFEGARD
®
Ultraviolet
Sterilizer
Step Up to
Lifegard® Technology
Eliminates the spread of disease
causing micro-organisms in
aquariums and for use inside
pond filters or skimmers to kill
free floating algae.
All Parts are Replaceable.
It is recommended that the
UV bulb and main body
housing be replaced annually.
15 Watt Model
Recommended for Tanks up to 120 gallons.
R440515
25 Watt Model
Recommended for Tanks up to 200 gallons.
R440252
23
AQUASTEP® PRO UV STERILIZER
Adjustable Clamp and
Adjustment Screws.
LIFEGARD
®
Clear View Port.
Allows visible light
(no UV) to pass
through and indicate
bulb is operating.
Versatile.
Ultraviolet
Sterilizer
Internal Step Design.
Directs water back and
forth across UV light,
tripling contact
time through unit.
Compression
Coupling
and Gasket.
Creates water tight
seal at quartz sleeve
and around ballast
cord.
UV Bulb.
Highest quality
pure hard quartz
material allows
maximum UV transmission
and longer bulb life. End
cap wire design drops bulb
further into unit for
maximum output and
keeps heat away from
sealing area.
Inlet and outlet on
top for hang-on use
and also at bottom for
below aquarium
installations. Use
inlet ports on each
side to connect
multiple units
together for any
size requirement.
Spring loaded clamp on top creates snug fit
while bottom screws keep unit level when
installed in hanging
position on
aquarium or
reservoir tank.
Waterfall.
Increases oxygen level by
spreading out a thin sheet
of gently falling water.
High Capacity.
More capacity than any other
make of equal height due to
shape of chamber and step
design. Creates more volume
area for increased
contact time.
All Parts are
Replaceable.
It is recommended
that the UV bulb and
main body housing
be replaced annually.
Ballast.
15 Watt and 25 Watt high
output UL Listed ballast.
(230V 50Hz ballast available).
Injection Molded
Construction.
Heavy duty, thick
wall PVC injection
molded parts.
Hang or Stand
Molded Design.
Flat side allows snug fit
to hang on any aquarium
or reservoir tank.
Molded base enables
ease of installation
beside or below tank.
Adjustable Clamp
and Adjustment Screws.
Spring loaded clamp on top
creates snug fit while bottom
screws keep unit level when
installed in hanging position
on aquarium or reservoir tank.
Plugs.
To plug off inlet ports not
in use. Can be removed to
drain or clean unit.
24
WOW MULTI-FUNCTION FILTER
Multi-Function Aquarium Maintenance Device



6 Models to choose from...
80, 160, and 235 GPH.
Available with or without
LED Moon Light.
For tanks from 20 Gallons
up to 60 Gallons.
Contains all these
amazing features in one
hang-in-the-tank unit
...Only One Power Plug
...Mechanical Filter
...Biological Filter
...Flow regulator
...Submersible Air Pump
...Wave Maker
...Air Stone
25
WOW MULTI-FUNCTION FILTER
Here is just one product that satisfies all
the requirements of your aquarium... with
revolutionary levels of effectiveness and
efficiency... a new pump with built-in
aerator and filter.
Available in 3 levels of power (80, 160
and 235 GPH)... with or without a built-in
LED Light... plus an innovative patented
diffuser which creates an amazing wave
effect in your tank.
In addition, the need for only one
power plug eases installation and
improves safety. A patented, submersed
aerator, without motor, guarantees
silent operation. The Wet & Dry
LED light system can be used safely in
or out of the water to create a dimmed
nightlight.
To complete this amazing product’s
features... the adjustable flow
regulator optimizes operation based
on the dimensions of your aquarium.
ACCESSORIES
AIR STONE
FLEX SPONGE
AIR REGULATOR
SPONGE (model 160 & 235)
AIR TUBE
COLORED LENS
with LED Light)
FILTER CHAMBER
CARTRIDGE with BioBalls
HEATER CLIP
26
FLUIDIZED BED FILTERS
TOXIC
SOLUBLE
WASTE
DECOMPOSING
ORGANIC
MATTER
TOXIC
AMMONIA
(NH3)
CONTROL VALVE
Keeps media in place and allows for easy
start up. External location for easy cleaning
or replacement. Can be used in either the
top or bottom inlet port.
Adjusts media level for maximum expansion of the filter
bed and proper water flow. When properly adjusted, prevents
media from escaping and entering aquarium. Can be easily
removed to add additional media.
SELF ADJUSTING
CLAMP
NON-TOXIC
NITRATE
(NO3)
NITRIFICATION
CYCLE
CHECK VALVE
Spring loaded clamp
insures a snug fit to
any aquarium or
reservoir tank.
TOXIC
NITRITE
(NO2)
INJECTION
MOLDED
CONSTRUCTION

LIFEGARD’s High Capacity “ Biological Filter” is a vessal
where nitrification occurs and toxic soluble waste is removed
from the aquarium.
Heavy duty thick wall
molded parts. Built to last.

Beneficial nitrifying bacteria attach to the media within
the filter creating a thin film around the sand grains, providing
an excellent transfer capability between the bacteria and the
toxic waste.
Angular shaped media
collide frequently,
knocking off debris which
creates new areas for
bacterial growth to occur.
Enormous surface area
for bacterial growth.
Easily fluidized with a
small pump.
 Water
is pumped up through the media lifting the sand into
a “fluidized bed”, creating a continuous free fall of media
inside the chamber.

Oxygen is replenished into the system by Lifegard’s exclusive
waterfall device spreading out a thin sheet of gently falling
water.
 The
beneficial bacteria attached to the media remove the
dissolved organic waste (ammonia and nitrite) converting
them to relatively harmless nitrate.
 The
enormously high surface area combined with excellent
transfer capability provide the perfect habitat for bacterial
growth.
 Tested
and proven to supply the highest level of effluent
water quality.

Responds quickly to severe changes in toxic soluble
waste caused by over feeding or the addition of too many
fish at one time.
WATER FALL
Increases oxygen
level by spreading
out a thin sheet of
gently falling water.
MEDIA
CLEAR
CHAMBER
Easy to view
fluidization level
at a glance.
DESIGN
HIGH
CAPACITY
Innovative design creates
more filter volume area
for increased capacity.
Flat side for snug fit to
any aquarium or reservoir
tank.
More capacity than
any other make of
equal height!
VERSATILITY
Inlet and outlet ports
at the top for hang on
aquarium installations.
Use inlet ports on each
side to connect multiple
units together for
any size installations.
ADJUSTMENT
SCREWS
DISTRIBUTION
PLATE
Keeps unit level when
installed in hanging
position on aquarium
or reservoir tank.
Lifts the sand bed
evenly and completely
for perfect fluidization.
LIFRAINBO
EG W
AR
FL
D
BEUIDIZ
D F ED
ILT
ER
®
PLUGS
Plug can be
removed on
either side
to drain or
clean unit.
FLAT BASE DESIGN
For installations below or
beside the aquarium.
Biological Media
for Fluidized Bed Filters
Provides higher surface area (71Sq. Ft. per pound). Self
cleaning function is due to sand grains colliding which creates
new areas for bacterial growth to occur. Improves filtration
in any make or model. 3 lb. (1.35 Kg) bottle. R270241
U.S. Pat. D392717
FLUIDIZED BED FILTERS Specifications
or Saltwater Media Surface Area
Part No. Model Fresh
Height Width Depth
System up to
Weight Sq.Ft.
R270203 FB 300
27
300 Gallons
3 lbs
214
17”
71/2”
3”
FILTRATION MEDIA
BIOMATE® Refillable Media Balls
Provides maximum surface area with the greatest possible mix of air and water.
Cultivates nitrifying bacteria. Promotes gas exchange, increases dissolved oxygen level
and removes harmful gases. Will not clog with organic matter. Manufactured of the
highest grade thermoplastic material. Totally inert and nonleaching.
Surface area: 11/2” = 13.06 ft 2 . 1” = 21.5 ft 2 .
Recommended usage: One gallon BIO-MATE for every 25 to 35 gallons of water. Also available in bulk.
LIFEGARD® FELT PADS
Replacement Material
(Bulk sizes available)
FELT PAD
Mechanical Filter Pad.
Filters particulent
material for sparkling
clear water.
 Long lasting quality
felt material.
 Ideal for Fresh or Saltwater
Aquariums and Ponds.


R440480
Pad Size: 30” x 36” White
PREFILTER
& FELT PAD
COMBO
R440485
Pad Size: 12” x 12” White
Pad Size: 12” x 12” Blue
PREFILTER
PAD
Filters large debris.
 Bonded, keeps original
shape.
 Superior filtration with
uniform and consistant
material.
 Duplicates or surpasses
original equipment
specifications.
 Long lasting material.
Foam Filled:
Carbon Filled:
Ceramic Filled:
Standard Solid:
Filter Boost:
Clean, Aerate, Biological
Purify, Aerate, Biological
Aerate, Biological
Aerate, Biological
R440308
R440304
R440312
R440300
R440301
1
1 /2” Ceramic, Carbon & Foam Balls for the
Ultimate Filter Boost
R440320
1 1/2”
1 1/2”
1 1/2”
1”
1 1/2”
PELLETIZED ACTIVATED
CARBON Professional Grade
Keeps fish and invertebrates healthy by absorbing
numerous chemicals, organic contaminants and some
metals. Removes colors and odors from aquariums that
mechanical and biological filtration leave behind.
Enormous surface area of three composite materials
inside pellet remove wider range of organic contaminants.
High adsorption capacity achieved by quantity of internal
carbon spore sizes. For phosphate free applications, pre-rinse carbon before use.
R280842 Half Gallon (28 oz.) R280840 Bulk (55 Gallon bag)

SUPER FELT PAD
R270835
Pad Size: 24” x 15” Blue
Combined sheet of Soft PREFILTER and Firm MECHANICAL
Filter... Eliminates need for a separate PREFILTER layer.
AQUAMESH®
Progressive Filter Media
Different Mesh Densities can be
used in sequence or separately in:
 Aquarium Wet/Dry Filters
Part No.
 Aquaculture Systems
R440353
 Aquarium Overflow
R440354
Chambers
R440355
 Biological Filters
R440356
 Pressurized Filters
R440357
R440358
 Waste Water Systems
R440359
 Pond Filters
R440360
Combined Prefilter and Mechanical Filter Pad.
Provides superior filtration with uniform
and consistant material.
 Filters large and small debris
for sparkiling clear water.
 Duplicates or surpasses
original equipment
specifications.
 Ideal for Fresh or Saltwater
Aquariums and Ponds.

Available in
4 mesh sizes:
39” x 24” x 11/2”
191/2” x 24” x 11/2”
Color
Stage
Description
Surface Area
Open Space
Grey
Blue
Green
Black
Grey
Blue
Green
Black
#4
#3
#2
#1
#4
#3
#2
#1
39” x 24”
39” x 24”
39” x 24”
39” x 24”
19.5” x 24”
19.5” x 24”
19.5” x 24”
19.5” x 24”
171 ft2 /ft3
124 ft2 /ft3
96 ft2 /ft3
62 ft2 /ft3
171 ft2 /ft3
124 ft2 /ft3
96 ft2 /ft3
62 ft2/ft3
94%
95%
93%
92%
94%
95%
93%
92%
AQUAMESH® Pre-Filter Tubes

Available with
11/2” FPT/MPT
Core Pipes.
R170150 Pad Size: 30” x 15” White
28
Part No.
Description
Size
R440350
R440351
R440352
Pre Filter with 11/2” MPT/FPT
12”x 5”
16”x 5”
22”x 5”
AQUARIUM MAINTENANCE
Test Strips
Lifegard Aquatics offers a complete line of custom designed test strips
for all important testing of Fresh or Saltwater Aquariums or Garden Pond
water. These state of the art strips help ensure proper water environment
for your indoor or outdoor fish and plants.
Each vial features a leak proof, hinged pop-top lid and a wrap
around desiccant liner to protect strips from moisture intrusion.
Packaged in bright attractive color-coded hang or stand boxes, 24 to
a master case.



6 Way All Purpose Test Kit............................. Contains 25 tests each of ALKALINITY, pH, NITRITE, NITRATE, HARDNESS and AMMONIA.
5 Way Test Strip.................................................. Contains 25 tests each of ALKALINITY, pH, NITRITE, NITRATE, and HARDNESS.
Ammonia Test Strip.......................................... Contains 25 tests of AMMONIA, using new Pat. Pend. technology. No separate vial needed.
R440001
R440002
R440003
Fish Feeder

Holds pellet or flake food.
Typical Installations:

Dispenses dry medication.
NEW Attachment Arms fit on all types and sizes of aquariums.

Feeds one to 4 times per day.

Perfect for vacations and daily maintenance.

No battery to fail or replace.
INCLUDES:
Accessories
Hopper

Feed fish daily up to four months
Food Funnel
automatically.

See food supply at a glance.
NEW Silent, Dependable
Electric Motor
Feeder
Ramp
Over the edge, large rim aquarium.
Sitting on the top, aquarium cover.
Over the edge, small rim aquarium.
Over the edge, plain
rim aquarium.
Double
Feed Arm
Single
Feed Arm
115V / 60 Hz
R440400
New Attachment
Arms fit all types
of Aquariums
Food Stick
Feeder Ramp
Thermometers
Lifegard digital thermometers are used for aquariums,
reptiles or greenhouses. All include a long-life AAA
battery, plastic probe with suction cup and cord. All
models are safe for salt or fresh water use.
Little Time or Temp™
A Digital Clock/Thermometer
with illuminating light for accurate
measurement of aquarium water or
room temperature in °F or °C.
Big Digital Temp Alert™
A large display digital thermometer with
Alert feature. Displays both aquarium water
temperature and room temperature. Available
in °F or °C models. Has four Alert features.
R270778
(Alarm will sound and LED flashes):
 High Temp Alert Only (Probe)  Both High & Low Temp Alert Only (Air/Room)
 Low Temp Alert Only (Probe)  Both High & Low Temp Alert Only (Probe)
R270779 ( °F) R270779C ( °C)
29
Wet or Dry Air Pumps
Can be used submersible or outside
aquarium (Wet or Dry). No air stone
needed when used in submersible
applications. Mini Light models
feature LED light to illuminate
bubbles inside aquarium and include
4 color lenses and air hoses. Easy to
place under gravel to conceal. Quiet operation.
Model 100 up to 30 gallon aquarium.
R440473 Max Depth 30”/Air Flow 15 GPH
R440451 (with LED Light)
Mini LED Light
Model 200 up to 60 gallon aquarium.
For use submersible or
outside aquarium (Wet or Dry).
Includes suction cup to attach
in desired location and 4
colored lenses. Low energy
consumption (0.5 watts).
R440452 Max Depth 40”/Air Flow 30 GPH
R440453 (with LED Light)
R440474
Lifegard Algae Pads
Scratch Removal Kit
Surface friendly Algae Scrub Pads are safe,
non-toxic and easy to use for removing line
scum, unsightly algae and other deposits
that form on aquarium surface.
Removes scratches from acrylic
aquariums and many forms of plastic
and wood surfaces. Contains instructions,
8 sheets of progressively graded “crystal
pad”, cotton flannel, sanding block
and 3/4” oz. “Final Polish”.
Available in two convenient sizes:
3” x 3” (7.62 cm x 7.62 cm)
6” (10.16 cm x 15.24 cm).
Blue for glass tanks and white for
acrylic tank surfaces.


4”x
R270910
R270911
R270912
R270913
R272000
3”x 3” Blue
3”x 3” White
4”x 6” Blue
4”x 6” White
30
Unique new Water Effect for Aquariums
Bubbles travel to create river like effect underwater.
 Adds mesmerizing beauty.
 Oxygenates and creates water movement.
 Easy to install in any size aquarium.

TWO SIZES
Small:
Up to 20 gallon tank
R440370
Meduim:
Up to 40 gallon tank
R440371
Multi-Purpose Slip
Bulkhead Fitting Kits
Plumbing Accessories
WATER
LEVEL
Custom installations are easier and safer with
standard bottom, side
all parts included in convenient kits. Heavy wall For
or back installations
bulkhead is molded of highest impact resistant
PVC eliminating possibility of finding hidden
cracks when filling aquarium. Versatile spigot
screen will just press into place. The exclusive Use elbow and strainer on
front to adjust water level
Fit x Insert 90° elbow dramatically reduces
wall clearance requirements. Use together
with spigot suction screen inside tank to
adjust water level. Use elbow alone as return
elbow as return
directional jet on inside of tank. Stock color is Use
directional jet
jet black to match acrylic tank backgrounds
and are available in 1/2” (1.27 cm), 3/4”(1.91 cm) and 1”
(2.54 cm) sizes. All kits contain: bulkhead fitting, gasket, lock nut,
90° Fit x Insert elbow, strainer and installation instructions.
WATER
LEVEL
WATER
LEVEL
R270578 ( 1/2”), R270600 (3/4”), R270579 (1”)
Lifegard also stocks a complete selection
of valves, fittings, adapters
and flexible tubing to
compete any
installation.
Fixed Scrubber
Fine grade pad on molded
handle for cleaning all size
aquariums.
R111581
Universal Scrubber
Has swivel joint handle allowing it to reach hard to get at spots.
Replaceable light duty pad 45/8” x 10” (11.68 cm x 25.4 cm). For
use on large aquariums, lobster tanks or holding tanks. Includes
snap-adapt handle. Replacement pads available. R111560
Replacement Cartridges
Cartridges available in 20 and 100
microns for CL 9 3/4”, 19 1/2”
and 29 1/4”, for Magnum and
Modulfilter Ocean Clear and
RTL 25, 75 and 100 Sq Ft in 20
and 100 microns. See price list
for part numbers.
Double Threaded
Bulkhead Fittings
Threaded on inside and outside!
R270900 ( 1/2”), R270904 ( 3/4”),
R270902 (1”)
31
CUSTOMFLO® WATER SYSTEM
F E AT U R E S :
OVER WALL
ASSEMBLY
 Swivels to allow close
tank wall positioning.
 Suction cups fasten to
inside and outside for
secure fit.
SPRAY or SOLID PIPE
 Use above or below water on return or
suction side.
 Create your own design using
elbows, T’s and
couplings with special suction cup adapters.
BLACK PIPE & FITTINGS
 Blends into tank appearance.
CONTROL VALVE
 Controls water flow.
 Valve rotates and locks in
desired position.
 Can be mounted vertical or
Assemble parts in multiple ways
to create desired flow patterns.
For use on large or small aquariums
or to upgrade existing system.

No Holes to Drill.

Includes Control Valves, Spray Bars,
Suction Cups, Adapters, Hydro Jet,
Ball/Socket Assembly and
necessary Fittings.
horizontal for custom
plumbing.
 Allow Aquarist to manipulate
flow into any pattern on
suction or return side.
 Can be attached to spray bar,
venturi Hydro jet, ball socket
assembly or suction screen.
HYDRO JET
R440049
 Allows mix of air with water
in any location of aquarium.
 Includes suction cup adapter
to attach air line tubing to
tank wall.
PIPE/HOSE ADAPTER
R440065
 For 1/2” or 3/4” flexible
tubing.
Complete Kit: Part No. R440031
SUCTION STARTER
 Open cap to prime
suction line.
SLIDER &
SUCTION CUP
 Swivels to allow close tank
wall positioning.
32
CUSTOMFLO® WATER SYSTEM
Starter Kit
Complete Kit
Customflo Water System
and Starter Kit
Let’s you assemble a variety of parts in
multiple ways to create desired flow patterns.
Complete Kit
Contains control valves, spray bars, suction cups,
adapters, hydro jet, ball/socket assembly and all necessary
fittings. R440031
Starter Kit
Introductory kit of 16 items enables you to experiment
with a variety of flow patterns. Additional and replacement
packaged parts are available. R440035
Customflo is only limited
by your imagination
Additional Replacement Parts
ADDITIONAL FEATURES & REPLACEMENT PARTS:
SAMPLE SYSTEM DESIGNS:
Small Pipe with Holes R440061
Screen Adapter R440074
Small Pipe without Holes R440062
Over/Wall Assembly R440047
Male Adapter R440069
Large Suction Cups
Slider with Bracket & Suction
Cup R440070
R440078
Suction Screen R440079
Complete Customflo System
Ball/Socket Assembly R440050
Pipe Cap R440076
Suction Cups R440077
Cap R440071
Valve Assembly R440048
Airline Bracket with
Suction Cup R440072
Large Pipe
R440063
Female Adapter R440060
Pipe Elbow R440075
Tee Bracket with
Suction Cup
R440068
Coupling
Bracket with
Suction Cup
R440066
Customflo System with Bottom
Customflo System with
Bottom Suction and HydrojetSuction and Ball/Socket Assembly
Pipe Bracket with
Suction Cup R440073
Coupling R440064
33
“O” Ring R440080
Elbow
Bracket with
Suction Cup
R440067
COMMERCIAL FILTERS
TARPON™
MARLIN™
The efficient TARPON SAND FILTER is matched with
a powerful and reliable SEA HORSE PUMP. Both are
mounted on a one-piece base with a safe 25’ cord.
This Pump/Filter System
provides excellent
performance at an
economical
price.
Patented Glas Lok™ process creates a
one-piece fiberglass reinforced tank with
UV resistant finish for years of unequaled
strength and
durability.
Sand Pump/Filter Systems
TARPON™
POND FILTER
Designed for Heavy Fish
Loads and High Flow Rates
Mechanical and biological filtration
in a one piece fiberglass tank
delivering superior strength and
durability. Includes new High
Flow Lateral System, designed
specifically for ponds and will not
clog. Six Position Hi-Flow Valve
controls all functions of FILTER,
WASTE, BACKWASH, CLOSED, RINSE
and RECIRCULATE.
High Rate Sand Filter
BIO-MATE™
Media Balls
Supplied with the Tarpon Pond Filters for
excellent mechanical filtration while also
providing maximum surface area with the greatest
possible mix of air and water. Cultivates nitrifying
bacteria, promotes gas
exchange, increases dissolved
oxygen level and removes
harmful gases. High surface
area will not clog with
organic matter.
TARPON POND FILTERS (with Multiport Valve, High Flow Laterals, 1” Bio-Mate media)
Part No. Model Filter Area Flow Rate
R440640 40
1.8 sq. ft. 40 GPM
R440641 50
2.3 sq. ft. 50 GPM
R440642 60
3.1 sq. ft. 60 GPM
R152901c Base and Hose Kit for Tarpon System
Turnover Capacity (Gallons)
6 Hours
8 Hours 10 Hours
14,400 19,20024,000
18,000 24,80030,000
21,600 28,80036,000
Sand ShipDimensions
Required Weight Main.Clear.Height Width
175 lb. 77 lb. 47 ”
37”
19 1/2”
225 lb. 82 lb. 51 1/2” 39 1/2”21 1/2”
325 lb. 85 lb. 57 ”
42 1/2”24 1/2”
(For complete system add Filter, Base & Hose Kit and Pump)
TARPON SAND FILTERS (with Multiport Valve)
R175306
R175307
R175293
R152901c
COMMERCIAL FILTERS
M-Series
40
1.8 sq. ft. 40 GPM
50
2.3 sq. ft. 50 GPM
60
3.1 sq. ft. 60 GPM
Base and Hose Kit for Tarpon System
14,400 19,20024,000
18,000 24,80030,000
21,600 28,80036,000
37”19 1/2”
39 1/2”21 1/2”
42 1/2”24 1/2”
175 lb.
225 lb.
325 lb.
30 lb.
35 lb.
38 lb.
47 ”
51 1/2”
57 ”
450 lb.
650 lb.
65 lb.
75 lb.
41 3/4”39 3/4”30 1/2”
47 1/4”45 1/4”36 1/2”
(For complete system add Filter, Base & Hose Kit and Pump)
MARLIN SAND FILTERS (without Valves)
R175308100 4.91 sq. ft.
R175309140 7.06 sq. ft.
Commercial sized M-Series Mechanical and Chemical Modules
are available to meet any size application including:
Custom Aquarium Installations, Central Filtration
Systems, Hatcheries, Reservoirs, Mixing
Tanks, Retail Store Displays, Livestock
Importers, Public Aquariums,
Aquaculture and Mariculture
Installations.
98 GPM
141 GPM
32,250 47,04058,800
50,760 67,68084,600
COMMERCIAL
CARTRIDGE
FILTERS ®
Two Filter Modular
Systems Connected
inTandem
RTL Dynamic Series
RTL TOP LOAD COMMERCIAL FILTERS
VERTICAL COMMERCIAL FILTERS
PART MOD. CARTRIDGE CART. SQ. FOOT NO. LENGTHREQ’D
FILTER AREA
R176131M-1 29 1/4” 112.5
R176132M-2 29 1/4” 225
R176133M-3 29 1/4” 337.5
R176134M-4 29 1/4” 450
R176136M-6 29 1/4” 675
Vertical Maintenance Clearance = Filter Height plus Cartridge Length
PLUMBING FLOW MAXIMUM FILTER DIMENSIONS SHIPPING
FLOW SIZE
1 1/4” FPT
1 1/2” FPT
1 1/2” FPT
1 1/2” FPT
1 1/2” FPT
GPH
GPH
HEIGHT 750
1500
2250
3000
4500
1500
3000
4500
6000
6900
39 1/2”5 1/2”9 1/4”
39 1/2”6” 15 1/4”
39 1/2” 6”
22”
39 1/2”11 3/4” 18”
39 1/2”11 3/4”24”
Filter with Gauge = Add 4” to Filter Height
WIDTH
DEPTH
WEIGHT
8 lbs.
14 lbs.
24 lbs.
28 lbs.
38lbs.
FPT = Female Pipe Thread
34
ORDER NUMBER
R172502J
R172503
R172505
R172452
UPC MODEL
788379+ NUMBER
503543 RTL 25
501556 RTL 75
501602 RTL 100
501105 RTL Base
DISCRIPTION
Slip, 3 oz. Cart.
Slip, 3 oz. Cart.
Slip, 3 oz. Cart.
FILTER
AREA 25 Sq. Ft.
75 Sq. Ft.
100 Sq. Ft.
MAXIMUM PLUMBING FILTER DIMENSIONS
FLOW RATEFLOW Height Diameter
100 gpm 2” Socket 18” 8.25”
100 gpm 2” Socket 25” 8.25”
100 gpm 2” Socket 31.5” 8.25”
COMMERCIAL PUMPS
INTELLIFLO
®
LIFEGARD
SEA HORSE
™
®
An intelligent variable drive
pump for water features,
ponds and waterfalls.
Pumps
 Self-priming.
 Fiberglass reinforced.
 Sizes itself to any body of
 11/2” suction and discharge
water.
 Reduces energy costs by as much as 90%.
 Protects against loss of prime or flow impedance.
 Prevents thermal overload.
 Corrects under and over voltage situations.
ports.
 Clear strainer pot lid and large
strainer basket.
 Unique diffuser and impeller
provide excellent pressure
performance across wide range of
desired gallon per minute flow rates.
 User friendly drain plugs.
LIFEGARD SEA HORSE PUMPS
Part No.
R175303
R175304
R175038
R175300
R175039
R175301
R175040
R175302
HP
1/6 HP Low Head
1/6 HP Low Head
1/2 HP
1/2 HP
3/4 HP
3/4 HP
1 HP
1 HP
GPM
38 GPM
35 GPM
66 GPM
50 GPM
76 GPM
58 GPM
82 GPM
65 GPM
Voltage
115V, 60Hz
230V, 50Hz
115V, 60Hz
230V, 50Hz
115V, 60Hz
230V, 50Hz
115V, 60Hz
230V, 50Hz
Amps
3.56
1.78
6.9
3.45
9.2
4.6
12
6
Ship Wt.
29 lb.
29 lb.
32 lb.
32 lb.
33 lb.
33 lb.
37 lb.
37 lb.
LIFEGARD®
SEA FLOW™
High Performance
Pumps
Features state of the art
engineering designed to circulate...
more water... in less time...using less
energy...creating less noise.
IntelliFlo can be sized for any job using simple gallons-per-minute
or desired water turnover data of up to 160 GPM. You no longer need
pump curves and hydraulic calculations to determine the right pump
for the job. Simply program pump speed to suit the application.
IntelliFlo then dials in the perfect power factor, delivering efficiency
never before possible.
EQ Series®
& EQW Series®
Injection Molded,
Commercial Pumps designed
for large pools, fountains and
water attractions demanding high
flow rates and continuous operation.
 Non-corrosive, all Noryl® plastic pump.
 6” suction and 4” discharge.
 Closed impeller for longer motor life.
EQ SERIES & EQW SERIES
 Bolt-on strainer pot.
115V-60Hz
 Available in single and
three-phase 60
hertz models.
 Energy efficient and quiet.
120
Feet of Water
100
 High temperature engineered thermoplastic construction.
80
60
5 HP
40
3 HP
 Single piece corrosion resistant strainer pot and volute.
20
 See-through lid with cam and ramp quarter twist lock.
0
 Oversized strainer basket.
7.5 HP
0
100
200
300
400
500
600
700
U.S. Gallons Per Minute
EQ SERIES & EQW SERIES PUMPS
 Funnel Flo™ diffuser for quiet operation.
 High efficiency impeller and life extending diffuser wear ring.
 All stainless steel hardware.
 2” suction and discharge ports.
LIFEGARD SEA FLOW PUMPS
All Models 50/60 Hz
Part No.
HP
R175316
R175217
R175318
R175295
R175314
R175315
1/2 HP
89 GPM 208/230V 11.2/6.0-5.6
. bl 14
3/4 HP
95 GPM 208/230V 11.2/6.0-5.6
. bl 14
1 HP 113 GPM 208/230V 14.8/7.8-7.4 46 lb.
11/ 2 HP
130 GPM 208/230V 9.6/8.8b.l54
2 HP 140 GPM 208/230V 11.0/10.2 55 lb.
3 HP 160 GPM 208/230V 15.0/13.6 56 lb.
GPM /60hz Voltage
Amps
Ship Wt.
35
Part No.
Model
340026
340027
340028
340029
340030
340031
340032
340033
340034
340035
EQW 300 1
EQWK 300 3
EQW 500 1
EQWK 500 3
EQ 500
1
EQK 500 3
EQ 750
1
EQK 750 3
EQK 1000 3
EQK 1500 3
Phase HP
3
3
5
5
5
5
7.5
7.5
10
15
GPM Voltage
450
450
230
450
405
405
555
555
605
820
15 HP
10 HP
Amps
Ship Wt.
115/230
38/19
126 lbs.
460/230-208 3.9/7.9-8.4 106 lbs.
230
23.4
126 lbs.
460/230-208 13.6/12.7-6.4 106 lbs.
230
19.6
126 lbs.
460/230-208 6.2/12.3-13.5 106 lbs.
230
30.4
161 lbs.
460/230-208 9.1/18.3-20.1 116 lbs.
460/230-208 12.2/24.3-27.1126 lbs.
460/230-208 17.8/36-40 161 lbs.
800
900
1000
SERVICE CART
L I F E G A R D®
Build Your Own Service Cart


Choose a Pump...
Quiet One
14000 Pump
1/2 HP
SeaHorse
Pump
Part: R440109
UPC: 788379310974
Part: R175038
UPC: 788379301293
Choose a Filter...
M-4 Filter
RTL Filter Series
Part: R176134 M-4 Filter
UPC: 788379302528
Part: R172505 RTL-100
UPC: 788379501602
Part: R172452 RTL Base
UPC: 788379501105

Add a Lifegard
Service Cart
Parts Kit...
This kit includes flexible hoses, u-tubes with valves,
basket suction diffusors, and all the necessary
plumbing parts to connect the pump and filter.
See back side for complete parts breakdown.
Part: R440650 UPC: 788379312756
Select a rolling cart from
a local hardware store...
 Assemble your Service Cart!

The best “time saving tool” available!
Clean your aquariums fast and efficiently!
36
SERVICE CART PARTS KIT BREAKDOWN
RTL
Filter
Parts
Kit
Qty. Part#
UPC788379+ Description
1.
2.
3.
4.
2
2
2
2
R270561
R270471
R270408
R175019
305420
304584
304041
301088
5.
6.
7.
8.
6
2
2
2
R175014
R175012
R175009
R175007
301002
300975
300913
300883
9. 2
10.* 2
11. 1
12. 1
R270465
R270485
R175206
R273026
304522
304720
301996
010287
13. 1 R270420
14. 3 R175003
304157
300845
15. 2 R270412 304089
16. 1 R175012A 010300
2” Suction Strainer
2” FPT x 2” Slip Adapter
2” Slip x 1” Slip Reducer Bushing
U-Tube w/1” Ball Valve & 1”
Insert Adapter
Hose Clamps
1” ID x 10’ Flex Hose
1/2” Hose Bib
1 1/2” MPT x 1/2” FPT Reducer
Bushing
Tee, Threaded 1 1/2” FPT
1 1/2” Nipple
1 1/2” Elbow MPT x Slip
1 1/2” FIT x 1” Hose Barb Male
Insert Adapter
1 1/2” MPT x 1” FPT Bushing
1” MPT x 1” Hose Barb Male
Insert Adapter
2” Slip FIT x 1” FPT Bushing
Flex Pipe, PVC 1” x 2’
20
M-4
Filter
Parts
Kit
*Part #10 not necessary if using Quiet One 14000 Pump
R440650
37
ALL IN ONE FILTER SYSTEM
LIFEGARD®
COMPLETE POND
FILTER SYSTEM
ALL IN ONE
R440430
™
Submersible Unit
Beautifies, Cleans and
Maintains a Healthy
Pond, Fountain or
Water Garden.
 Mechanical Filter
to Remove Solids.
 Biological Filter for
Bacteria Growth.
 Ultraviolet Sterilizer to
Kill Free Floating Algae.
 Quiet Efficient
Fountain Pump.
 4 Water Feature
Attachments with Ball
Joint Leveling Device.
For Ponds or Water Gardens from
300 Gallons up to 1500 Gallons.
4 Water Feature
Attachments
38
ALL IN ONE FILTER SYSTEM
LIFEGARD®
COMPLETE POND
FILTER SYSTEM
ALL IN ONE ™
Submersible Unit Beautifies,
Cleans and Maintains a
Healthy Pond, Fountain
or Water Garden.
SPECIFICATIONS:
58 Watts
679 GPH
8.65 Feet of Head
9 Watt U-Shaped UV
Bulb In Protective
Quartz Sleeve
UL Listed Ballast
25’ Pump Power Cable
25’ UV Power Cable
(Run Only When Required)
Mechanical Filter
Pump
25’ Pump
Power Cable
UV Lamp with Protective
Quartz Sleeve
Biological Media
Handle
PART#
DESCRITION
R440435
R440439
R440440
R440446
Fountain Kit
Diverter Valve
Fitting
Mechanical Filter
Sponge Media
Biological Filter
Media
UV Cover Housing
Quartz Sleeve
UV Replacement
Bulb
“O” ring, Connector,
Cap and Ballast
Pump
Pump Impeller
Pump “O” Ring
Front Housing
R440447
R440448
R440436
R440437
25’ UV Power Cable
(Run Only When Required)
UV Baffle Design
Increases Contact
Time for Better
Performance
Pond Fountain
Feature Attachment
39
R440438
R440442
R440443
R440444
R440445
UNO, DUO, TRIO FILTERS & KITS
Submersible Pond Filters
and Filter/Pump Kits
TRIO Filter
R440013
Featuring Mechanical and Biological
Filtration for crystal clear water.
DUO Filter
UNO
R440012
1000 Gallons/3800 Liters
Single Module for
Small Ponds

Pond Filter for use with any pump
UNO Filter
R440011

R440011
Filter/Pump Kit includes 4000
Quiet One® Pump
R440011
DUO
Double Module for
Medium Sized Ponds

Pond Filter for use with any pump
R440012

UNO+ Add-On Cartridge
Filter/Pump Kit includes
4000 Quiet One®
Pump
This UNO Cartridge will double the capacity, turning
your UNO into a DUO Pond Filter. Add it to your DUO
and make it a
TRIO Pond Filter.
R440022
R440024
TRIO
Triple Module for
Large Sized Ponds

Pond Filter for use
with any pump
R440013

Filter/Pump Kit includes
6000 Quiet One®
Pump
UNO+ Replacement
Sponge Set
R440023
Fits UNO, DUO, and TRIO Pond Filters
R440026
40
CAGED POND PUMPS
Ideal for fountains, waterfalls, and
dirty water applications.
 Shell
surrounds pump to significantly reduce maintenance.
 Easy to open shells with locking clips.
 Vortex designed impeller for dirty water.
 Wide range of nozzles.
 Bottom of shell closed to
keep debris out.
 Diverter valve to operate two
different water features.
 Flow regulation.
 Easy grip handle.
Model
1268
1,268 GPH
Model
1004
1,004 GPH
ADDITIONAL FEATURES FOUND
ONLY ON MODELS 1004 & 1286
 Top or side discharge, ideal when
using an external filter.
 Adjustable internal grid.
 Venturi oxygenation
device.
Vortex designed
impeller
Double screen,
anti-clog design
16
Maximum Height (Feet)
14
Model
650
Model
650 GPH
304
12
10
Model 1268
8
6
4
Model 1004
2
304 GPH
0
0
250
500
750
1000
1250
1500
Flow Rate (GPH)
Part#
R440456
R440457
R440458
R440459
9
8
7
6
5
Model 304
4
3
2
1
0
7
6
Model 650
5
4
3
2
1
0
100
200
300
Flow Rate (GPH)
400
0
0
100
200
300
400
600
800
Flow Rate (GPH)
41
Model
304
650
1004
1268
Flow Rate
303.8 GPH
649.8 GPH
1003.8 GPH
1268 GPH
Watts
20
55
75
110
Max Ht.
6.56 Ft.
8.20 Ft.
8.53 Ft.
14.14 Ft.
Amps
0.25
1.0
1.3
2.3
DIRTY WATER PUMP SERIES
Submersible
Waterfall/Utility
Pumps
MODEL 978
978 GPH
Designed for medium to large ponds
for dirty water. Create streams,
waterfalls, or use in conjunction
debris
with external filters Clears
up to 4 mm
for Model
or skimmers.
Double
978.
rotation
Features anti-clog
impeller
system which allows
pump to clean itself
of debris up to 8mm
thickness.
Clears debris up to 8 mm for
Models 1,430 / 2,100 / 2,780
MODEL 1430
Model 978 GPH
Model 2100 GPH
Model 1430 GPH
Model 2780 GPH
Model
978
1430
2100
2780*
25
F
20
E
E 15
T
10
5
0
0
500
1000
1500
GPH
2000
2500
3000
2780 GPH
2100 GPH
35
30
MODEL 2780
MODEL 2100
1430 GPH
Part #
R440467
R440468
R440469
R440470
Volts
120 V
120 V
120 V
120 V
Hz
60 Hz
60 Hz
60 Hz
60 Hz
Watts
43 W
140 W
150 W
250 W
Amps
0.64
0.91
0.91
2.0
Max. Ht.
9 Feet
13 Feet
15 Feet
31 Feet
Flow Rate
978 GPH
1430 GPH
2100 GPH
2780 GPH
*Model 2780 includes water detection technology... pump turns on/off automatically.
LIFEGARD® UTILITY PUMP
Multi-Use Submersible Pump Designed to Move
GPH
Water or Drain to 1/8” or less
Volt
12

3/4” threaded discharge fits standard hoses.
Continuous duty oil-free design.
 Easy access handle.
 Completely submersible.
 Thermoplastic housing will not rust or corrode.
 Removable base for easy cleaning without tools.

HEAD (Feet)
10
8
6
4
2
0
0
100
200
300 400 500 600
FLOW RATE (GPH)
700
800
900
793
120
Hz
60
Watts 97
Amp 2.43
Ht. Ft. 10.2
Made in Italy
UTILITY PUMPS
Use to Drain Aquariums, Pools, Flooded Basements, Standing Water and to Feed Waterfalls and Fountains.
SMART
PUMP 900 GPH
R172720
UTILITY
PUMP
1200 GPH
R172730
Totally versatile. For use in
ponds, pools, boats, spas,
basements and shallow
flooded areas.
Checks for water every
few minutes. Will not
run without water.
Includes 10’ Cord.
1/6 HP. 5/8” GHT.
Removes standing water down to 1/8”.
Lifts to 20’. Manual operation.
1/6 HP. 5/8” GHT.
Simple Operation for both:
1. Connect to standard
5/8” x 25’ garden hose.
2. Place pump in water.
3. While satnding on dry ground
plug into grounded outlet.
42
POND MAINTENANCE
Pond Mini-Vac
For use with garden hose or 11/4’/11/2’
vacuum hose. Includes debris bag and
hose adapter. Has brush attachment
for fiberglass, vinyl or smooth surfaces
and nozzle/wheel attachment for rough
surfaces.
Snap-adapt
handle fits
any pole.
R201144
Pond Brush
18” polished metal back and UV
stabilized bristles. Fits standard poles.
R500080
Pro-Pond Nets
Replaceable frame with wear resistant
deep net. Has snap-adapt handle and
squeegee strip for
scraping bottoms.
Pond Leaf Eater
Works with garden hose to remove
large debris and leaves from ponds and
fountains. Includes standard mesh bag,
snap-adapt handle, and brushes for
smooth surfaces and wheels for hard
bottoms. 3’ and 5’ large capacity bags
are also available.
R121230
R211044
Pond E-Z
Read Combo
Sink or Float
Thermometer Pond Wet or
Dry Air Pump
ABS construction with
shatterproof magnifying
lens. Includes snap on/off
floatation top and 36”
rope leash with anchor
plate, °F or °C scales.
Model 300 with 20’ cord.
Up to 90 gallons. Max depth
40”, Air Flow 80 GPH.
R440016
Pond Skimmer
Pond
Thermometer
R440454
Long Handle
Skimmer
Includes 4’ aluminum pole and
magnet to remove metal
debris. R121186
For removing surface debris with ease. Includes
polyester screen molded into frame and snap-adapt
handle to fit any pole. R121166
ABS molded tube case
thermometer has sealed
in blown glass tube with
°F or °C scales and
polyethylene rope.
Poles
R440015
2 Piece
Telescopic Pole.
Extends to 71/2’.
R191066
PVC Pole
11/4” x 6’ with
pole cap.
R191128
43

TABLE OF CONTENTS

Transcription

Similar documents

PikStik Aqua Tong Brochure

Juwel Trigon 190

Flyer_microProdukte_GB_UK_1112

Sewage Pump

Product Brochure M-iQ Flight Type

MADE IN THE USA - FreshWaterSystems.com

BLCL6032 - ibathtile.com

Hydro-Filter™ - Phoenix Truckmounts

ecopure® dual stage filter