Precision Twist Drill Catalog

Transcription

Reaming
Milling
Threading
2009
M A I N C ATA L O G
Drilling
How to Use This Catalog
AMG Charts
Our AMG (Application Material Group) Charts are located at the front of each tool section and are designed to
give you all the product information you will need to find the best tool quickly.
In the AMG example seen below (see page 12 - Solid Carbide Drill AMG), you can find this information:
How to use the
chart to find
operating parameters
Tool features
Product pages
(see below)
Application Material
Groups
Product pages:
• Features
• Drawings
• Sizes
• Order Codes
To order our products, or if you have any questions, please contact our customer service team at the numbers
listed below, or contact [email protected]. To find a distributor in your area, please visit our web site.
USA
301 Industrial Avenue
Crystal Lake, IL 60012
Phone: 1-800-877-3745
Fax: 1-815-459-2804
Hours: M-F 7a.m.-5p.m. CST
CANADA
2550 Meadowvale Blvd, Unit 3
Mississauga, ON L5N 8C2
Phone: 1-888-336-7637
En Français: 1-888-368-8457
Fax: 905-542-7000
Hours: M-F 8a.m.-5p.m. EST
2
Customer Service, Sales and Technical Support
www.precisiondormer.com
Table of Contents
Style Index (Alpha/Numeric Order)
4
DRILLS
Table of Contents............................................................. 6
Technical (Feed Rates).................................................... 9
SOLID CARBIDE DRILLS
AMG Chart (Products Follow) ....................................... 12
HSS DRILLS
Stub Drills AMG Chart (Products Follow) ..................... 26
Quick Search by
Tool Style on
next page
Jobber Drills AMG Chart (Product Follow).................... 54
Taper Length Drills AMG Chart (Product Follow)........ 108
Extra Length Drills AMG Chart (Products Follow) ...... 136
Taper/Redc’d Shank AMG Chart (Products Follow) ... 152
Special Purp./Sets AMG Chart (Products Follow) ...... 166
D
L
B-C
E
M
TAPS and DIES
Table of Contents......................................................... 182
AMG Charts ................................................................ 186
Technical Charts .......................................................... 201
Straight Flute Taps ....................................................... 211
Spiral Point Taps .......................................................... 252
Spiral Flute Taps .......................................................... 285
Thread Forming Taps .................................................. 308
Pipe Taps ..................................................................... 322
Drill and Tap, Wrenches & Dies ................................... 336
Q
SOLID CARBIDE END MILLS
Technical (Feed Rates)................................................ 346
AMG Chart (Products Follow) ..................................... 348
HSS END MILLS
REAMERS, MISC
3
Product Index by Style
A
Application/
Material Guides
Drills
D33W
23
E058
300
E6302V
370
A002
68
D444
169
E059
242
E6304
387
M40CO
40
A012
66
D555
170
E060
265
E6304G
388
M41CO
41
25
E061
212
E6304V
388
M42C0
40
178
E064
309
E650, E651
335
M51CO
123
25
E069
289
E653
336
M52CO
124
E071
214
E710
322
Q
QC0860P
146
148
Solid Carbide
12
A022
34
DC
HSS Stub
26
A141
65
Drill Sets
A217
172
A218
172
A221
173
HSS Jobber
54
HSS Taper Length
108
HSS Extra Length
136
HSS Taper/Red. Shank 152
Special Purpose
166
Taps/Dies
DS-90
E
E000
259
E074
310
EB3302
363
M
A236
173
E001
260
E079
290
EB3302G
364
QC1290P
A345
150
E002
294
E080
313
EB3302M
366
QC21
74
A510
60
E003
295
E085
293
EB3302MG
367
QC21CO
70
Straight Flute
186
A520
28
E005
256
E094
311
EB3302MV
368
QC21COM
71
Spiral Point
190
A553
58
E006
257
E097
311
EB3302V
365
QC21G
73
Spiral Flute
194
A554
59
E007
291
E098
76
196
EB3304
382
Thread Forming
312
QC21GM
62
E008
291
Taper Pipe
E099
312
EB3304G
383
QC21M
198
A577
77
A578
110
E009
310
E1302
355
EB3304M
385
QC21P
75
Miscellaneous Taps
Dies
200
200
End Mills
A597
30
E010
261
E1302G
356
EB3304MG
386
QC21PM
77
A720
33
E011
262
E1302V
356
EB3304MV
384
QC21V
72
A907
64
E012
296
E1304
374
EB3304V
384
QC41
38
Solid Carbide
348
A916
112
E013
297
E1304G
374
EB4302
369
QC41CO
36
HSS
394
A927
31
E015
258
E1304V
375
EB4304
387
QC41G
37
A976
138
E016
258
E2302
357
EB6302
371
QC41P
A977
139
E017
292
E2304
375
EB6302G
371
QC91
118
A978
139
E018
292
E3302
357
EB6302V
372
QC91CO
114
E025
252
E3302G
358
EB6304
389
QC91COM
115
E026
254
E3302M
360
EB6304G
389
QC91G
117
E027
285
E3302MG
361
EB6304V
390
QC91GM
120
E028
286
E3302MV
362
EZ10P
84
QC91M
121
E3302V
359
EZ18P
84
QC91P
119
122
116
Reamers
Counterbores
Countersinks
440
441
442
ATR41
175
B
B76HA
171
C
Guide to Icons
Drills
11
39
C191
430
E029
308
C192
432
E035
253
E3303
372
EZ40G
43
QC91PM
C291
433
E036
255
E3303G
373
EZ40P
44
QC91V
C292
435
E037
287
E3303V
373
EZ41G
45
C391
436
E038
288
E3304
376
EZ41P
45
R002
126
R022
15
R08
102
R
16
Taps/Dies
203
C392
436
E039
309
E3304G
SC End Mills
348
CO500-12
141
E040
330
E3304M
379
HSS End Mills
394
CO500-6
140
E041
330
E3304MG
380
G135
465
R09
133
Reamers/Counterbores
440
CO501-12
141
E042
331
E3304MV
381
G136
466
R10
91
Countersinks
442
CO501-6
140
E043
331
466
R10A
89
87
D
Feed Rate Charts
Drills
8
E3304V
378
EZ51P
G
G137
354
G138
467
R10B
354
G154
467
R10CO
E044
299
E3603
E045
263
E3603G
18
E046
264
E3603V
355
D12W
19
E048
299
E4302
368
HX10
85
R10P
D13F
14
E049
263
E4304
386
HX15
85
R10PM
100
D13M
14
E050
298
E500
244
HX18
86
R10S
106
D21
24
E051
298
E501
247
D31F
20
E052
300
D000
168
D12F
E513
SC End Mills
346
D31W
21
E053
242
E547
HSS End Mills
392
D33F
22
E054
243
E550
438
D33L
22
E055
264
D33M
4
377
24
E057
265
E6302
E6302G
R10H
H
78
103
97
R15
93
248
L10
106
R15A
90
332
L18
107
R15B
88
333
L209
158
R15CO
80
369
L40
53
R15P
99
R18
92
370
L
Product Index by Style (con’t)
R18A
89
TN1543(NPTF) 324
901
424
1528(UNC)
216
1593(UNF)
280
4587
451
R18B
88
TN1585 (UNC) 273
905
412
1528(UNF)
218
1595(UNC)
233
4588
452
79
TN1585(UNF) 273
907
416
1528(UNS)
218
1595(UNF)
233
4591
451
R18CO
R18H
104
TN1785
275
911
428
1528S
219
1599(M)
241
4600
452
R18P
98
TN9002
400
917
428
1534(UNC)
266
1599(UNC)
240
4602
464
105
TN9003
404
919
429
1534(UNF)
267
1599(UNF)
240
4603
465
50
TN9008
402
920
409
1534NE(UNC) 283
1599SB(M)
241
4608
456
46
TN9009
405
920K
410
1534NE(UNF) 283
1600(UNC)
239
4700
461
412
1534NR(UNC) 276
1600(UNF)
239
4702
459
R18S
R40
R40C
R41
51
TN920
411
921
R41C
47
TN921
413
922
413
1534NR(UNF) 277
1634(UNC)
268
4703
460
52
TN923
416
923
415
1534NR(UNS) 277
1634(UNF)
268
4704
463
R42
48
TN940
420
930
417
1541(NPT)
323
1700(M)
225
4705
462
128
TN943
426
931
418
1542(NPS)
329
1700S
227
4706
461
R51FS
134
TN945
422
933
418
1543(NPTF)
324
1785M
275
8007
338
R51K
127
TN946
424
940
419
1544(NPT)
325
1785NR
282
9002
400
125
TN948
427
941
421
1545(NPT)
325
1788(M)
305
9003
403
425
1545A(NPT)
326
9004
406
R42C
R51
R51OH
R52
129
TS10,15,18
177
943
R52FS
134
TS40, 41
177
944
421
1546(NPTF)
326
1800
468
9008
402
125
TS51, 52, 55 177
945
422
1548(NPT)
328
1813
149
9009
405
R53OH
R55
130
R55FS
135
946
423
1549(NPTF)
328
1815
468
947
425
1567(NPTF)
327
1816
468
948
427
1568(NPT)
327
1985(UNC)
274
146
960
407
1572(UNC)
236
1985(UNF)
274
U
U1511
1800-3850
237
0860-883
R56
163
R56CO
162
0860
164
2A
95
961
408
1572(UNF)
237
1900
468
165
2AB
94
962
408
1578(UNC)
284
1994(UNC)
334
83
2ACO
81
963
407
1578(UNF)
284
1994(UNF)
83
60B
176
980
414
1580(M)
316
2010
334
341
390
76HA
171
981
414
1580(UNC)
314
2025
339
76LO
171
982
415
1580(UNF)
315
2025S
340
178
209
156
1582(UNC)
301
2510
342
S209
159
209CO
SM8
176
209OH
SPL, SPLG
174
SPR, SPRG
SPS, SPSG
R57
R58
R88CO
R89CO
RTDA
S
SETS
1215-1301
154
1215
337
1582(UNF)
301
2325M
340
155
1290
147
1585(UNC)
270
2710M
343
229C
337
1301
338
1585(UNF)
271
3150
344
174
4ASM
49
174
4ASMCO
42
SS300
457
411
SS400
457
T
1500-1788
1585A(UNC) 272
3300(M)
319
1500(UNC)
220
1585A(UNF) 272
3300(UNC)
317
468
1500(UNF)
222
1585NR(UNC) 278
3300(UNF)
318
430
468
1500(UNS)
223
1585NR(UNF) 279
3306E(UNC) 320
500-6
142
1500A(UNC) 228
1585OV(UNC) 281
3306E(UNF)
321
3850
338
211
500-12
144
1500A(UNF) 228
1586(UNC)
302
T110
211
501-6
143
1500L(UNC) 230
1586(UNF)
302
T400
458
501-12
145
1500L(UNF)
230
1587(UNC)
303
4500
449
401
502-6
142
1500L(UNS) 231
1587(UNF)
303
4531
450
404
502-12
144
1500OV(UNC) 231
1588(UNC)
304
4532
455
TC9008
403
5ATL
131
1500S
224
1588(UNF)
304
4533
443
TC9009
406
5ATS
T100
TC9002
TC9003
4500-9009
160
1505(UNC)
234
1590(UNC)
306
4533S
446
TN1500(UNC) 229
707, 727, 757 468
1505(UNS)
235
1590(UNF)
306
4535
447
TN1500(UNF) 229
860
146
1508(UNC)
232
1591(UNC)
307
4536
454
TN1534(UNC) 269
883
429
1508(UNF)
232
1591(UNF)
307
4537
453
1511
149
1592(NPSF)
329
4543
448
1519(UNC)
238
1593(UNC)
280
4579
456
900-982
TN1534(UNF) 269
TN1541(NPT) 323
900
423
5
Drill Table of Contents
Style
Solid Carbide
D12F
D12W
D13F, D13M
D21
D31F
D31W
D33F
D33L
D33M
D33W
DC
DS-90
R002
R022
Stub
4ASM
4ASMCO
A022
A520
A597
A720
A927
EZ40G
EZ40P
EZ41G
EZ41P
L40
M40, 41, 42CO
QC41
QC41CO
QC41G
QC41P
R40
R40C
R41
R41C
R42
R42C
Jobber
A002
A012
A141
A510
A553
A554
A577
A907
QC21
QC21CO
QC21COM
QC21G
QC21GM
QC21P
QC21V
6
Description
Size
Point Angle
Finish
Slow Helix, Short
Slow Helix, Short
3 Flute Solid Short
Spade Drill
Short
Short
Standard Length
Standard Length
Standard Length
Standard Length
Center Drill
Spotting Drill
Standard Length
Short
F
W
F,M
F
F
W
F
L
M
W
No.
F
F, W, L, M
F, W, L, M
135°
135°
150°
118°
140°
140°
118°
118°
118°
118°
60°
90°
118°
118°
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright/TiN
Bright/TiN
18
19
14
24
20
21
22
22
24
23
25
25
16
15
Heavy-Duty
Heavy-Duty
TiN-Tipped
ADX, Quick Helix, CNC Machining
PFX, Cobalt, Deep-Hole Drilling
Micro
PFX, Cobalt, Deep-Hole Drilling
Parabolic
Parabolic
Parabolic
Parabolic
Left-Hand
Heavy-Duty
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
General Purpose
Heavy-Duty
General Purpose
Heavy-Duty
General Purpose
Heavy-Duty
M
M
F,M
F,M
M
M
F,M
F
F
W
W
F
F, W, L
F,W
F,W
F,W
F,W
F
F
W
W
L
L
135°
135°
135°
130°
130°
118°
130°
135°
135°
135°
135°
118°
135°
135°
135°
135°
135°
118°
135°
118°
135°
118°
135°
Steam Oxide
Bronze
Bright/TiN
TiN
TiAlN
Bright
Bright
TiN
Bright
TiN
Bright
Bright
Bronze
Steam Oxide
Bronze
TiN
Bright
Bright
Steam Oxide
Bright
Steam Oxide
Bright
Steam Oxide
49
42
34
28
30
33
31
43
44
45
45
53
40
38
36
37
39
50
46
51
47
52
48
118°, 4-Facet Point
TiN-Tipped
Fast Spiral
ADX, Quick Helix, CNC Machining
ADX Coolant
ADX Coolant
PFX, Cobalt Deep-Hole
PFX, Cobalt Deep-Hole
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
M
F, L, W
F
F, M
M
M
M
F, L,W
F, W
F, W, L
M
F, W
M
F, W, L
F, W
118°
118°
135°
130°
130°
130°
130°
130°
135°
135°
135°
135°
135°
135°
135°
Bright/TiN
Bright/TiN
Steam Oxide/Bronze
TiN
TIAlN
TIAlN
Bright
Bright
Steam Oxide
Bronze
Bronze
TiN
TiN
Bright
TiAlN
68
66
65
60
58
59
62
64
74
70
71
73
76
75
72
Page No.
Drill Table of Contents (con‘t)
Style
Jobber (con’t)
2A
2AB
2ACO
EZ10P
EZ18P
HX10
HX15
HX18
L10, L18
QC21M
QC21PM
R08
R10
R10A
R10B
R10CO
R10H
R10P
R10PM
R10S
R15
R15A
R15B
R15CO
R15P
R18
R18A
R18B
R18CO
R18H
R18P
R18S
R88CO
R89CO
Taper
5ATL
A578
A916
EZ51P
M51CO
M52CO
QC91
QC91CO
QC91COM
QC91G
QC91GM
QC91M
QC91P
QC91PM
QC91V
R09
R51
R51FS
R51K
R51OH
R52
R52FS
Description
Size
Point Angle
Finish
General Purpose
General Purpose
Heavy-Duty, Type J
Parabolic
Parabolic
General Purpose
General Purpose
General Purpose
Left Hand
Wide-Land Parabolic
Wide-Land Parabolic
Auto, Tang
General Purpose
Heavy-Duty, Type A
Heavy-Duty, Type B
Heavy-Duty, Type J
High Helix
General Purpose
General Purpose
Low Helix
General Purpose
Heavy-Duty, Type A
Heavy-Duty, Type B
Heavy-Duty, Type J
General Purpose
General Purpose
Heavy-Duty, Type A
Heavy-Duty, Type B
Heavy-Duty, Type J
High Helix
General Purpose
Low Helix
Heavy-Duty, Type D
Heavy-Duty, Type D
M
M
M
F
W
F
L
W
F, W
M
F
F, L, W
F
F
F
F
F
F
M
W
L
L
L
L
L
W
W
W
W
W
W
F
F
W
118°
118°
135°
135°
135°
135°
135°
135°
118°
135°
135°
118°
118°
118°
135°
135°
118°
118°
118°
118°
118°
118°
135°
135°
118°
118°
118°
135°
135°
118°
118°
118°
135°
135°
Bright
Steam Oxide
Bronze
Bright
Bright
Purple/Bronze
Purple/Bronze
Purple/Bronze
Bright
Steam Oxide Oxide
Bright
Steam Oxide
Steam Oxide
Steam Oxide
Steam Oxide
Bronze
Bright
Bright
Bright
Bright
Steam Oxide
Steam Oxide
Steam Oxide
Bronze
Bright
Steam Oxide
Steam Oxide
Steam Oxide
Bronze
Bright
Bright
Bright
Bronze
Bronze
95
94
81
84
84
85
85
86
106
77
77
102
91
89
87
78
103
97
100
106
93
90
88
80
99
92
89
88
79
104
98
105
83
83
General Purpose
PFX
PFX
Tanged
Heavy-Duty
Heavy-Duty
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Wide-Land Parabolic
Auto Tang
General Purpose
High Helix
Tanged
23° Helix
General Purpose
High Helix
F, M
M
F, M
F
F
W
F, W
F, W
M
F, W
M
M
F, W
M
F, W
F
F
F
F
F
W
W
118°
130°
130°
135°
135°
135°
135°
135°
135°
135°
135°
135°
135°
135°
135°
118°
118°
118°
118°
118°
118°
118°
Bright, Steam Oxide
TIAlN
Bright
Bright
Bronze
Bronze
Steam Oxide
Bronze
Bronze
TiN
TiN
Steam Oxide
Bright
Bright
TiAlN
Steam Oxide
Bright
Bright
Steam Oxide
Bright
Bright
Bright
131
110
112
126
123
124
118
114
115
117
120
121
119
122
116
133
128
134
127
125
129
134
Page No.
7
Drill Table of Contents
Description
Style
Taper (con’t)
R53OH
34° Helix
R55
General Purpose
R55FS
High Helix
Extra Length
0860
8” Extra Length
1290
12” Extra Length
1511
15” Extra Length
1813
18” Extra Length
500-12
Aircraft Extension, Type B
500-6
501-12
501-6
502-12
502-6
A345
Taper Shank
A976, 977, 978 PFX, Cobalt, Deep-Hole Drilling
CO500-12
Heavy-Duty, Cobalt, 12”
CO500-6
CO501-12
CO501-6
QC0860P
Wide-Land Parabolic
QC1290P
Wide-Land Parabolic
Taper Shank/Reduced Shank
209
Taper Shank
209CO
Taper Shank
209OH
32°, Taper, Coolant
5ATS
Taper Shank
L209
Large Taper
R56
1/2” Reduced Shank, S&D
R56CO
1/2”, Round Red. Shank, S&D
R57
1/2”, S&D, 3-Flat Shank
R58
1/2”, S&D, Round Shank
S209
Small Taper
Miscellaneous/Special Purpose/Sets
60B
Drill Blank
76HA
Combined/Drill C’Sink, Reg. Lgth
76LO
Combined/Drill C’Sink, Extra Lgth
A217, A218
Center Drill
A221, A236
Center Drill
ATR41
Aircraft Taper Router
B76HA
Combined/Drill C’Sink, Bell Type
D000
Carbide-Tipped Die
D444
Carbide-Tipped Jobber
D555
Carbide-Tipped Taper Length
Drill Sets
All
SM8
Body Drill
SPL, SPLG
Spotting Drill, Long
SPR, SPRG
Spotting Drill, Regular
SPS, SPSG
Spotting Drill, Short
TS10,15,18
Threaded Hex Shank, Short
TS40, 41
Threaded Hex Shank, Stub
TS51, 52, 55
Threaded Hex Shank, Long
8
(con‘t)
Size
Point Angle
Finish
F
L
L
118°
118°
118°
Bright
Bright
Bright
125
130
135
F
F
F
F
F
F
W
W
L
L
F, M
F, W
F
F
W
W
F
F
118°
118°
118°
118°
135°
135°
135°
135°
135°
135°
118°
130°
135°
135°
135°
135°
135°
135°
Bright
Bright
Bright
Bright
Steam Oxide
Steam Oxide
Steam Oxide
Steam Oxide
Steam Oxide
Steam Oxide
Steam Oxide
Bright
Bronze
Bronze
Bronze
Bronze
Bright
Bright
146
147
149
149
144
142
145
143
144
142
150
138
141
140
141
140
146
148
F
F
F
M
F
F
F
F
F
F
118°
135°
118°
118°
118°
118°
118°
118°
118°
118°
Steam Oxide
Bronze
Steam Oxide
Steam Oxide
Steam Oxide
Bright/Steam Oxide
Steam Oxide/Bronze
Bright/Steam Oxide
Bright/Steam Oxide
Steam Oxide
156
154
155
160
158
163
162
164
165
159
F
No.
No.
No.
No.
No.
No.
F
F, W, L
F
N/A
60° C’Sink Angle
60° Point Angle
120°
118°
N/A
60/120° Pt. Angle
118°
118°
118°
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
F
F
F
F
F
F
F
135° Split Point
90° or 120°
90° or 120°
90° or 120°
135° Split Point
135° Split Point
135° Split Point
Steam Oxide
Bright or TiN
Bright or TiN
Bright or TiN
Steam Oxide
Steam Oxide
Steam Oxide
176
171
171
172
173
175
171
168
169
170
178
176
174
174
174
177
177
177
Page No.
Drill Feed Rate Chart - Inches
How To Use This Chart to Find Cutting Feed
Rate (IPR):
Size
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code)
2. Find the closest diameter for your cutting application on the chart to find your IPR
Feed in Inches per Revolution (IPR) ± 25%
Alpha
Code
1mm/
1/32”
2mm/
3/32”
3mm/
1/8”
4mm/
5/32”
5mm/
3/16”
6mm/
1/4”
Ø Diameter
8mm/ 10mm/ 12mm/ 15mm/ 16mm/ 20mm/ 25mm/ 30mm/ 40mm/ 50mm/
5/16”
3/8”
1/2”
9/16”
5/8”
3/4”
1”
1.1/8” 1.5/8”
2”
A
0.0004 0.0009 0.0011 0.0013 0.0014 0.0017 0.0021 0.0024 0.0027 0.0032 0.0034 0.0043 0.0049 0.0053 0.0061 0.0069
B
0.0006 0.0011 0.0015 0.0016 0.0018 0.0021 0.0026 0.0031 0.0035 0.0041 0.0043 0.0053 0.0060 0.0065 0.0074 0.0082
C
0.0006 0.0013 0.0017 0.0020 0.0022 0.0025 0.0031 0.0039 0.0043 0.0049 0.0051 0.0063 0.0071 0.0077 0.0087 0.0094
D
0.0006 0.0015 0.0021 0.0024 0.0027 0.0031 0.0039 0.0047 0.0051 0.0059 0.0061 0.0074 0.0083 0.0090 0.0100 0.0108
E
0.0007 0.0017 0.0024 0.0028 0.0031 0.0037 0.0045 0.0055 0.0059 0.0068 0.0071 0.0085 0.0094 0.0102 0.0112 0.0122
F
0.0007 0.0020 0.0029 0.0033 0.0037 0.0043 0.0054 0.0065 0.0070 0.0080 0.0083 0.0098 0.0108 0.0116 0.0126 0.0135
G
0.0007 0.0022 0.0033 0.0038 0.0043 0.0050 0.0063 0.0075 0.0081 0.0091 0.0094 0.0110 0.0122 0.0130 0.0140 0.0148
H
0.0008 0.0026 0.0040 0.0046 0.0051 0.0059 0.0075 0.0090 0.0096 0.0107 0.0110 0.0126 0.0140 0.0148 0.0157 0.0165
I
0.0008 0.0030 0.0047 0.0053 0.0059 0.0068 0.0087 0.0104 0.0110 0.0122 0.0126 0.0142 0.0157 0.0165 0.0173 0.0181
J
0.0009 0.0033 0.0053 0.0060 0.0067 0.0078 0.0098 0.0117 0.0124 0.0137 0.0142 0.0159 0.0175 0.0183 0.0191 0.0198
K
0.0010 0.0036 0.0059 0.0067 0.0075 0.0087 0.0110 0.0130 0.0138 0.0153 0.0157 0.0177 0.0193 0.0201 0.0209 0.0215
L
0.0011 0.0040 0.0065 0.0073 0.0082 0.0094 0.0120 0.0142 0.0152 0.0165 0.0169 0.0191 0.0207 0.0215 0.0224 0.0231
M
0.0012 0.0043 0.0071 0.0080 0.0089 0.0102 0.0130 0.0154 0.0165 0.0177 0.0181 0.0205 0.0220 0.0228 0.0238 0.0248
N
0.0013 0.0047 0.0077 0.0086 0.0095 0.0110 0.0140 0.0165 0.0179 0.0189 0.0193 0.0219 0.0234 0.0242 0.0253 0.0265
S
0.0003 0.0006 0.0008 0.0010 0.0012 0.0015 0.0020 0.0031 0.0039 0.0048 0.0051 0.0059
T
0.0006 0.0011 0.0016 0.0020 0.0024 0.0028 0.0035 0.0043 0.0051 0.0063 0.0067 0.0075
U
0.0010 0.0019 0.0028 0.0031 0.0035 0.0042 0.0055 0.0067 0.0079 0.0088 0.0091 0.0094
V
0.0015 0.0027 0.0039 0.0045 0.0051 0.0060 0.0079 0.0098 0.0110 0.0122 0.0126 0.0134
W
0.0019 0.0035 0.0051 0.0059 0.0067 0.0079 0.0102 0.0130 0.0150 0.0165 0.0169 0.0177
X
0.0022 0.0041 0.0059 0.0071 0.0083 0.0098 0.0130 0.0165 0.0189 0.0210 0.0217 0.0228
Y
0.0027 0.0049 0.0071 0.0087 0.0102 0.0125 0.0169 0.0217 0.0276 0.0276 0.0276 0.0291
Z
0.0037 0.0068 0.0098 0.0128 0.0157 0.0210 0.0315 0.0394 0.0433 0.0463 0.0472 0.0472
Easy Calculations:
(inch)
RPM
SFM
IPM
IPR
Inch
=
=
=
=
=
Terms:
D
RPM
SFM
IPM
IPR
=
=
=
=
=
SFM/D x 3.82
RPM x D x .262
IPR x RPM
IPM ÷ RPM
mm x .0394
Drill Diameter
Revolutions Per Minute
Surface Feet per Minute
Inches Per Minute
Inches Per Revolution
IPR = Inches Per Revolution
9
Drill Feed Rate Chart - Metric
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code)
2. Find the closest diameter for your cutting application on the chart to find your IPR
Feed in mm per Revolution (IPR) ± 25%
Ø Diameter
Alpha 1mm/ 2mm/ 3mm/ 4mm/ 5mm/ 6mm/ 8mm/ 10mm/ 12mm/ 15mm/ 16mm/ 20mm/ 25mm/ 30mm/ 40mm/ 50mm/
Code 1/32” 3/32” 1/8” 5/32” 3/16” 1/4” 5/16” 3/8”
1/2”
9/16”
5/8”
3/4”
1”
1.1/8” 1.5/8”
2”
A
0.0102 0.0229 0.0279 0.0330 0.0356 0.0432 0.0533 0.0610 0.0686 0.0813 0.0864 0.1092 0.1245 0.1346 0.1549 0.1753
B
0.0152 0.0279 0.0381 0.0406 0.0457 0.0533 0.0660 0.0787 0.0889 0.1041 0.1092 0.1346 0.1524 0.1651 0.1880 0.2083
C
0.0152 0.0330 0.0432 0.0508 0.0559 0.0635 0.0787 0.0991 0.1092 0.1245 0.1295 0.1600 0.1803 0.1956 0.2210 0.2388
D
0.0152 0.0381 0.0533 0.0610 0.0686 0.0787 0.0991 0.1194 0.1295 0.1499 0.1549 0.1880 0.2108 0.2286 0.2540 0.2743
E
0.0178 0.0432 0.0610 0.0711 0.0787 0.0940 0.1143 0.1397 0.1499 0.1727 0.1803 0.2159 0.2388 0.2591 0.2845 0.3099
F
0.0178 0.0508 0.0737 0.0838 0.0940 0.1092 0.1372 0.1651 0.1778 0.2032 0.2108 0.2489 0.2743 0.2946 0.3200 0.3429
G
0.0178 0.0559 0.0838 0.0965 0.1092 0.1270 0.1600 0.1905 0.2057 0.2311 0.2388 0.2794 0.3099 0.3302 0.3556 0.3759
H
0.0203 0.0660 0.1016 0.1168 0.1295 0.1499 0.1905 0.2286 0.2438 0.2718 0.2794 0.3200 0.3556 0.3759 0.3988 0.4191
I
0.0203 0.0762 0.1194 0.1346 0.1499 0.1727 0.2210 0.2642 0.2794 0.3099 0.3200 0.3607 0.3988 0.4191 0.4394 0.4597
J
0.0229 0.0838 0.1346 0.1524 0.1702 0.1981 0.2489 0.2972 0.3150 0.3480 0.3607 0.4039 0.4445 0.4648 0.4851 0.5029
K
0.0254 0.0914 0.1499 0.1702 0.1905 0.2210 0.2794 0.3302 0.3505 0.3886 0.3988 0.4496 0.4902 0.5105 0.5309 0.5461
L
0.0279 0.1016 0.1651 0.1854 0.2083 0.2388 0.3048 0.3607 0.3861 0.4191 0.4293 0.4851 0.5258 0.5461 0.5690 0.5867
M
0.0305 0.1092 0.1803 0.2032 0.2261 0.2591 0.3302 0.3912 0.4191 0.4496 0.4597 0.5207 0.5588 0.5791 0.6045 0.6299
N
0.0330 0.1194 0.1956 0.2184 0.2413 0.2794 0.3556 0.4191 0.4547 0.4801 0.4902 0.5563 0.5944 0.6147 0.6426 0.6731
S
0.0076 0.0152 0.0203 0.0254 0.0305 0.0381 0.0508 0.0787 0.0991 0.1219 0.1295 0.1499
T
0.0152 0.0279 0.0406 0.0508 0.0610 0.0711 0.0889 0.1092 0.1295 0.1600 0.1702 0.1905
U
0.0254 0.0483 0.0711 0.0787 0.0889 0.1067 0.1397 0.1702 0.2007 0.2235 0.2311 0.2388
V
0.0381 0.0686 0.0991 0.1143 0.1295 0.1524 0.2007 0.2489 0.2794 0.3099 0.3200 0.3404
W
0.0483 0.0889 0.1295 0.1499 0.1702 0.2007 0.2591 0.3302 0.3810 0.4191 0.4293 0.4496
X
0.0559 0.1041 0.1499 0.1803 0.2108 0.2489 0.3302 0.4191 0.4801 0.5334 0.5512 0.5791
Y
0.0686 0.1245 0.1803 0.2210 0.2591 0.3175 0.4293 0.5512 0.7010 0.7010 0.7010 0.7391
Z
0.0940 0.1727 0.2489 0.3251 0.3988 0.5334 0.8001 1.0008 1.0998 1.1760 1.1989 1.1989
Easy Calculations:
(mm)
10
RPM
m/min.
mm/min.
mm
=
=
=
=
Terms:
D
RPM
m/min.
mm/min.
mm/rev.
=
=
=
=
=
[(m/min.) x 1000] ÷ (3.14 x D)
SFM ÷ 3.281
(SFM ÷ 3.281) x 1000
Inch ÷ .0394
Drill Diameter
Revolutions Per Minute
Meters Per Minute (Cutting Speed)
Millimeters Per Minute
Millimeters Per Revolution
Guide to Icons - Drills
ADX Point
Continually
Thinned
Web Point
PFX Point
Conventional Split
Point
Point
Straight
Flute
Coolant
Split
Point
4-Facet
Point
Radius
Split Point
ADX SP
Coolant
Point
Special
Point
Geometry
Special
Point
Geometry
(ADX)
(A002, A012)
Regular
Helix
21° - 34°
Slow
Helix
10° - 20°
Whistle
Notch
Shank
Cylindrical
Shank
Thinned
Point
Carbide
(Hard
Metal)
Carbide
Tipped
High Speed
Cobalt
Material
High Speed
Steel
Material
Straight
Shank
Reduced
Shank
Taper
Shank
Shank
with Tang
Shank
with
Sq. End
Stub/Short
Length
Intermediate
Length
Jobber/
Standard
Length
Long
Length
Extra
Length
Dormer
Standard
Continuously Solid
Carbide
Thinned
Web
Tin-Tipped
Steam
Oxide
Bright
Finish
TiAlN
Top Coat
Bright with
TiN Tip
Countersink
Angle
Quick
Helix
35° - 45°
Bronze
11
Solid Carbide Drills
D13F
D13M
Style:
How To Use This AMG Chart:
R022
R002
Tool Material:
1 Determine your Workpiece Material. Select Material from the
AMG Chart below.
2 Use the icons to find Depth of Cut and other Product Features.
3 Find the Surface Feet Per Minute (SFM) and Alpha Code.
example:
279 S
279 = SFM
S = Alpha Code to find your Feed Rate
4 To calculate Cutting Feed Rate, refer to chart on pages 9-10.
Ŷ
Ɣ
= Excellent for Application
= Good for Application
Finish/Coating:
Direction of Cut:
2
Depth of Cut:
Tool Length:
Shank:
Helix:
Point Angle:
Point Style:
Point Type:
Page # for easy reference
Application Material Groups (AMG)
1
1.1 Magnetic soft steel
1.2 Structural Steel/ case carburising steel
1.3 Plain Carbon steel
1.4 Alloy steel
1. Steel
1.5 Alloy steel/ Hardened and tempered steel
1.7 Alloy steel Hardened
2.1 Free machining Stainless Steel
2.Stainless
2.2 Austenitic
Steel
2.3 Ferritic + Austenitic, Martensitic
2.4 Precipitation Hardened
3.1 Lamellar graphite
3.Cast Iron
3.3 Nodular graphite/ Malleable Cast Iron
4.1 Titanium, unalloyed
4.Titanium
4.2 Titanium, alloyed
5.1 Nickel, unalloyed
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.2 ß-Brass, Bronze
6.Copper
6.3 Į-Brass
6.4 High Strength Bronze
7.1 Al, Mg, unalloyed
7.Aluminium 7.2 Al alloyed, Si<0.5%
Magnesium 7.3 Al alloyed, Si>0.5%<10%
7.4 Al alloyed, Si>10% Mg alloys
8.1 Thermoplastics
8.Synthetic
8.2 Thermosetting plastics
Materials
8.3 Reinforced plastic materials
9.Hard Mat.
9.1 Cermets (Metal-ceramics)
10.Graphite
10.1 Standard graphite
12
Standard:
3
Surface Feet per Minute (SFM)
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
15-5PH, Custom 450 17-4PH
Grey, G10, Gg40, J431C, A48 CLASS 20
Grey, GG25-Gg40, J158, A48 CLASS 40-60
A220, A436, A439, A602, Black, GGG40-GGG70
Black Gts/Gtw, J434C
Commercially Pure
6A14V, 6A14V-2Sn, Monel, Monel K
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure, 17644, 200, 5553
Monel 400, Hastelloy C, Inconel 625, Waspaloy
Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
Commercially Pure
314-340, 350-370
Alloyed Cu + Al + Fe, Long Chipping
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Magnesium Whisker Reinforced
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
14
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ279U
Ŷ230U
Ŷ230U
Ŷ164T
Ŷ148S
Ŷ131S
Ɣ246V
Ɣ246V
Ɣ180V
Ɣ180V
Ɣ131T
Ɣ131T
Ɣ82T
15
16-17
Ŷ246V
Ŷ213V
Ŷ213V
Ŷ180V
Ŷ148U
Ŷ148U
Ŷ98U
Ŷ98U
Ŷ246U
Ŷ213U
Ŷ213U
Ŷ180U
Ŷ148T
Ŷ148T
Ŷ98T
Ŷ98T
Ŷ246X
Ŷ246X
Ŷ180X
Ŷ180X
Ŷ246W
Ŷ246W
Ŷ180W
Ŷ180W
Ɣ623W
Ɣ623W
Ɣ623V
Ɣ623V
Ɣ508W
Ɣ508W
Ɣ279W
Ɣ148W
Ɣ148X
Ɣ246W
Ɣ508V
Ɣ508V
Ɣ279V
Ɣ148V
Ɣ148X
Ɣ246V
Ɣ72T
Ɣ46S
Ŷ230W
Ɣ656X
Ŷ367X
Ŷ197X
Ŷ105U
Solid Carbide Drills (con‘t)
D31F
D31W
D33
(F, W,
L, M)
D21
DS-90
DC
D12F
D12W
18-19
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
20-21
22-24
24
25
Ɣ279S
Ɣ246S
Ɣ246S
Ɣ230S
Ɣ148S
Ɣ148S
Ɣ98S
Ɣ98S
Ɣ98S
Ɣ98S
Ɣ75S
Ɣ65S
Ɣ246T
Ɣ246T
Ɣ180T
Ɣ180T
Ɣ279S
Ɣ246S
Ɣ246S
Ɣ230S
Ɣ148S
Ɣ148S
Ɣ98S
Ɣ98S
25
Ɣ279S
Ɣ246S
Ɣ246S
Ɣ230S
Ɣ148S
Ɣ148S
Ɣ98S
Ɣ98S
Ɣ98S
Ɣ279S
Ɣ246S
Ɣ246S
Ɣ230S
Ɣ148S
Ɣ148S
Ɣ98S
Ɣ98S
Ŷ279S
Ŷ246S
Ŷ246S
Ŷ230S
Ŷ148S
Ŷ148S
Ŷ98S
Ŷ98S
Ŷ174S
Ŷ148S
Ɣ279S
Ɣ246S
Ɣ246S
Ɣ230S
Ɣ148S
Ɣ148S
Ɣ98S
Ɣ98S
Ɣ75S
Ɣ65S
Ɣ246T
Ɣ246T
Ɣ180T
Ɣ180T
Ɣ246T
Ɣ246T
Ɣ180T
Ɣ180T
Ɣ246T
Ɣ246T
Ɣ180T
Ɣ180T
Ɣ246T
Ɣ246T
Ɣ180T
Ɣ180T
Ŷ820V
Ŷ820V
Ŷ820V
Ŷ820V
Ŷ820V
Ŷ820V
Ŷ820V
Ŷ820V
Ɣ656V
Ɣ656V
Ɣ367V
Ɣ197V
Ŷ197X
Ŷ328V
Ɣ656V
Ɣ656V
Ɣ367V
Ɣ197V
Ŷ197X
Ŷ328V
Ɣ656V
Ɣ656V
Ɣ367V
Ɣ197V
Ŷ197X
Ŷ328V
Ɣ656V
Ɣ656V
Ɣ367V
Ɣ197V
Ŷ197X
Ŷ328V
Ŷ246T
Ŷ246T
Ŷ180T
Ŷ180T
Ŷ148T
Ŷ115T
Ŷ82S
Ŷ148T
Ŷ98S
Ŷ66S
Ŷ902V
Ŷ820V
Ŷ820V
Ŷ230T
Ŷ656V
Ŷ656V
Ŷ367V
Ŷ197V
Ŷ197X
Ŷ328V
Ŷ820V
Ŷ820V
Ɣ656V
Ɣ656V
Ɣ367V
Ɣ197V
Ŷ197X
Ŷ328V
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
13
D13F - D13M
Ɣ Foret extra-court
Ɣ Short length
Ɣ 3-Flute
Ɣ Broca extra corta
D13F
Ŷ
Ɣ
d1
Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
d1
dec.
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
l2
Inch
3/4
13/16
7/8
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.1/2
1.9/16
1.5/8
1.5/8
1.5/8
1.21/32
1.3/4
1.7/8
l1
Inch
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.7/16
EDP #
or
e-Code
006008
006009
006010
006011
006012
006013
006014
006015
006016
006017
006018
006019
006020
006021
006022
006023
006024
006025
006026
006027
006028
006029
d1
Ø
Inch
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
EDP #
or
e-Code
006130
006133
006135
006140
006145
006148
006150
006155
006160
006165
006168
006170
006175
006180
d1
Ø
mm
8.50
9.00
9.50
10.00
10.20
10.50
10.80
11.00
11.50
12.00
12.50
d1
dec.
Inch
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
l2
Inch
1.7/8
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.1/4
2.7/8
2.7/8
2.7/8
2.7/8
3.1/8
l1
Inch
3.5/8
3.11/16
3.3/4
3.7/8
3.7/8
4“
4“
4“
4“
4“
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
4.5/8
5“
EDP #
or
e-Code
006030
006031
006032
006033
006034
006035
006036
006037
006038
006039
006040
006041
006042
006043
006044
006045
006046
006047
006048
D13M
d1
Ø
mm
3.00
3.30
3.50
4.00
4.50
4.80
5.00
5.50
6.00
6.50
6.80
7.00
7.50
8.00
14
d1
dec.
Inch
0.1181
0.1299
0.1378
0.1575
0.1772
0.1890
0.1969
0.2165
0.2362
0.2559
0.2677
0.2756
0.2953
0.3150
l2
mm
20
20
20
22
24
24
24
29
29
29
34
34
34
38
l1
mm
50
50
50
50
55
55
55
63
63
63
68
68
68
75
d1
dec.
Inch
0.3346
0.3543
0.3740
0.3937
0.4016
0.4134
0.4252
0.4331
0.4528
0.4724
0.4921
l2
mm
38
41
41
41
41
41
44
44
48
48
57
l1
mm
75
80
80
80
84
84
87
87
92
92
102
EDP #
or
e-Code
006185
006190
006195
006200
006202
006205
006208
006210
006215
006220
006225
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
R022
Ɣ Short length
R022
Ŷ
Ɣ
d1
Øh7
Inch
1/8
30
29
25
24
5/32
20
21
17
16
14
3/16
10
9
8
7
3
7/32
d1
Øh7
mm
3.00
3.10
3.18
3.20
3.26
3.30
3.40
3.45
3.50
3.60
3.70
3.80
3.80
3.86
3.90
3.97
4.00
4.04
4.04
4.10
4.20
4.30
4.40
4.40
4.50
4.50
4.60
4.62
4.70
4.76
4.80
4.90
4.92
4.98
5.00
5.06
5.10
5.11
5.20
5.30
5.40
5.41
5.50
5.56
d1
dec.
Inch
0.1181
0.1220
0.1252
0.1260
0.1283
0.1299
0.1339
0.1358
0.1378
0.1417
0.1457
0.1496
0.1496
0.1520
0.1535
0.1563
0.1575
0.1591
0.1591
0.1614
0.1654
0.1693
0.1732
0.1732
0.1772
0.1772
0.1811
0.1819
0.1850
0.1874
0.1890
0.1929
0.1937
0.1961
0.1969
0.1992
0.2008
0.2012
0.2047
0.2087
0.2126
0.2130
0.2165
0.2189
l2
mm
16
18
18
18
18
18
20
20
20
20
20
22
22
22
22
22
22
22
22
22
22
24
24
24
24
24
24
24
24
26
26
26
26
26
26
26
26
26
26
26
28
28
28
28
l1
mm
46
49
49
49
49
49
52
52
52
52
52
55
55
55
55
55
55
55
55
55
55
58
58
58
58
58
58
58
58
62
62
62
62
62
62
62
62
62
62
62
66
66
66
66
Dormer
Stock
No.
0392744
0392751
0422595
0392768
0422700
0392775
0392782
0422717
0392799
0392805
0392812
0392829
0422724
0422731
0392836
0422663
0392843
0422755
0422748
0392850
0392867
0392874
0392881
0422762
0422779
0392898
0392904
0422786
0392911
0422632
0392928
0392935
0422793
0422809
0392942
0422816
0392959
0422823
0392966
0392973
0392980
0422830
0392997
0422687
EDP #
or
e-Code
R0223.0
R0223.1
R0221/8
R0223.2
R022N30
R0223.3
R0223.4
R022N29
R0223.5
R0223.6
R0223.7
R0223.8
R022N25
R022N24
R0223.9
R0225/32
R0224.0
R022N20
R022N21
R0224.1
R0224.2
R0224.3
R0224.4
R022N17
R022N16
R0224.5
R0224.6
R022N14
R0224.7
R0223/16
R0224.8
R0224.9
R022N10
R022N9
R0225.0
R022N8
R0225.1
R022N7
R0225.2
R0225.3
R0225.4
R022N3
R0225.5
R0227/32
d1
Øh7
Inch
1
D
1/4
F
I
9/32
M
5/16
Q
R
11/32
d1
Øh7
mm
5.60
5.70
5.80
5.80
5.90
6.00
6.10
6.20
6.23
6.30
6.35
6.40
6.50
6.53
6.60
6.70
6.80
6.90
6.91
7.00
7.10
7.14
7.20
7.30
7.40
7.49
7.50
7.60
7.70
7.80
7.90
7.94
8.00
8.10
8.20
8.30
8.40
8.43
8.50
8.60
8.61
8.70
8.73
8.80
8.90
d1
dec.
Inch
0.2205
0.2244
0.2283
0.2283
0.2323
0.2362
0.2402
0.2441
0.2453
0.2480
0.2500
0.2520
0.2559
0.2571
0.2598
0.2638
0.2677
0.2717
0.2720
0.2756
0.2795
0.2811
0.2835
0.2874
0.2913
0.2949
0.2953
0.2992
0.3031
0.3071
0.3110
0.3126
0.3150
0.3189
0.3228
0.3268
0.3307
0.3319
0.3346
0.3386
0.3390
0.3425
0.3437
0.3465
0.3504
l2
mm
28
28
28
28
28
28
31
31
31
31
31
31
31
31
31
31
34
34
34
34
34
34
34
34
34
34
34
37
37
37
37
37
37
37
37
37
37
37
37
40
40
40
40
40
40
l1
mm
66
66
66
66
66
66
70
70
70
70
70
70
70
70
70
70
74
74
74
74
74
74
74
74
74
74
74
79
79
79
79
79
79
79
79
79
79
79
79
84
84
84
84
84
84
Dormer
Stock
No.
0393000
0393017
0393024
0422847
0393031
0393048
0393055
0393062
0422854
0393079
0422588
0393086
0393093
0422861
0393109
0393116
0393123
0393130
0422878
0393147
0393154
0422694
0393161
0393178
0393185
0422885
0393192
0393208
0393215
0393222
0393239
0422656
0393246
0393253
0393260
0393277
0393284
0422892
0393291
0393307
0422908
0393314
0422601
0393321
0393338
EDP #
or
e-Code
R0225.6
R0225.7
R0225.8
R022N1
R0225.9
R0226.0
R0226.1
R0226.2
R022D
R0226.3
R0221/4
R0226.4
R0226.5
R022F
R0226.6
R0226.7
R0226.8
R0226.9
R022I
R0227.0
R0227.1
R0229/32
R0227.2
R0227.3
R0227.4
R022M
R0227.5
R0227.6
R0227.7
R0227.8
R0227.9
R0225/16
R0228.0
R0228.1
R0228.2
R0228.3
R0228.4
R022Q
R0228.5
R0228.6
R022R
R0228.7
R02211/32
R0228.8
R0228.9
15
R022 - R002
Ɣ Short length
d1
Øh7
Inch
T
U
3/8
25/64
Y
13/32
d1
Øh7
mm
9.00
9.09
9.10
9.20
9.30
9.35
9.40
9.50
9.53
9.60
9.70
9.80
9.90
9.92
10.00
10.10
10.20
10.26
10.30
10.32
10.40
10.50
10.60
d1
dec.
Inch
0.3543
0.3579
0.3583
0.3622
0.3661
0.3681
0.3701
0.3740
0.3752
0.3780
0.3819
0.3858
0.3898
0.3906
0.3937
0.3976
0.4016
0.4039
0.4055
0.4063
0.4094
0.4134
0.4173
l2
mm
40
40
40
40
40
40
40
40
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
l1
mm
84
84
84
84
84
84
84
84
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
Dormer
Stock
No.
0393345
0422915
0393352
0393369
0393376
0422922
0393383
0393390
0422649
0393406
0393413
0393420
0393437
0422939
0392683
0566817
0392690
0422946
0566824
0423240
0566831
0392706
0566848
EDP #
or
e-Code
R0229.0
R022T
R0229.1
R0229.2
R0229.3
R022U
R0229.4
R0229.5
R0223/8
R0229.6
R0229.7
R0229.8
R0229.9
R02225/64
R02210.0
R02210.1
R02210.2
R022Y
R02210.3
R02213/32
R02210.4
R02210.5
R02210.6
d1
Øh7
Inch
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
d1
Øh7
mm
10.70
10.72
10.80
10.90
11.00
11.10
11.11
11.20
11.30
11.40
11.50
11.51
11.60
11.70
11.80
11.90
11.91
12.00
12.30
12.70
13.10
13.49
d1
dec.
Inch
0.4213
0.4220
0.4252
0.4291
0.4331
0.4370
0.4374
0.4409
0.4449
0.4488
0.4528
0.4531
0.4567
0.4606
0.4646
0.4685
0.4689
0.4724
0.4843
0.5000
0.5157
0.5311
l2
mm
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
51
51
51
51
51
54
54
l1
mm
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
102
102
102
102
102
107
107
Ɣ Foret court
Ɣ Standard length
Dormer
Stock
No.
0566855
0422953
0566862
0566879
0392713
0566886
0422670
0566893
0566909
0566916
0392720
0422960
0566923
0566930
0566947
0566954
0422618
0392737
0422977
0422571
0422984
0422625
EDP #
or
e-Code
R02210.7
R02227/64
R02210.8
R02210.9
R02211.0
R02211.1
R0227/16
R02211.2
R02211.3
R02211.4
R02211.5
R02229/64
R02211.6
R02211.7
R02211.8
R02211.9
R02215/32
R02212.0
R02231/64
R0221/2
R02233/64
R02217/32
Ɣ Broca , serie corta
R002
Ŷ
Ɣ
d1
Øh7
Inch
1/8
30
29
25
24
5/32
16
d1
Øh7
mm
3.00
3.10
3.18
3.20
3.27
3.30
3.40
3.45
3.50
3.60
3.70
3.80
3.80
3.86
3.90
3.97
d1
dec.
Inch
0.1181
0.1220
0.1250
0.1260
0.1285
0.1299
0.1339
0.1360
0.1378
0.1417
0.1457
0.1495
0.1496
0.1520
0.1535
0.1563
l2
mm
21
23
23
23
23
23
26
26
26
26
26
30
30
30
30
30
l1
mm
61
65
65
65
65
65
70
70
70
70
70
75
75
75
75
75
Dormer
Stock
No.
0381502
0381519
0393468
0381526
0395738
0381533
0381540
0395745
0381557
0381564
0381571
0395752
0381588
0395769
0381595
0393543
EDP #
or
e-Code
R0023.0
R0023.1
R0021/8
R0023.2
R002N30
R0023.3
R0023.4
R002N29
R0023.5
R0023.6
R0023.7
R002N25
R0023.8
R002N24
R0023.9
R0025/32
d1
Øh7
Inch
21
20
17
16
14
3/16
d1
Øh7
mm
4.00
4.04
4.09
4.10
4.20
4.30
4.40
4.40
4.50
4.50
4.60
4.62
4.70
4.76
4.80
4.90
d1
dec.
Inch
0.1575
0.1590
0.1610
0.1614
0.1654
0.1693
0.1730
0.1732
0.1770
0.1772
0.1811
0.1820
0.1850
0.1875
0.1890
0.1929
l2
mm
30
30
30
30
30
33
33
33
33
33
33
33
33
37
37
37
l1
mm
75
75
75
75
75
80
80
80
80
80
80
80
80
86
86
86
Dormer
Stock
No.
0381601
0395776
0395783
0381618
0381625
0381632
0395790
0381649
0395806
0381656
0381663
0395813
0381670
0393512
0381687
0381694
EDP #
or
e-Code
R0024.0
R002N21
R002N20
R0024.1
R0024.2
R0024.3
R002N17
R0024.4
R002N16
R0024.5
R0024.6
R002N14
R0024.7
R0023/16
R0024.8
R0024.9
R002
d1
Øh7
Inch
10
9
8
7
3
7/32
1
D
1/4
F
I
9/32
M
5/16
Q
R
11/32
d1
Øh7
mm
4.92
4.98
5.00
5.06
5.10
5.11
5.20
5.30
5.40
5.41
5.50
5.56
5.60
5.70
5.79
5.80
5.90
6.00
6.10
6.20
6.23
6.30
6.35
6.40
6.50
6.53
6.60
6.70
6.80
6.90
6.91
7.00
7.10
7.15
7.20
7.30
7.40
7.49
7.50
7.60
7.70
7.80
7.90
7.94
8.00
8.10
8.20
8.30
8.40
8.43
8.50
8.60
8.61
8.70
8.73
8.80
d1
dec.
Inch
0.1935
0.1960
0.1969
0.1990
0.2008
0.2010
0.2047
0.2087
0.2126
0.2130
0.2165
0.2187
0.2205
0.2244
0.2280
0.2283
0.2323
0.2362
0.2402
0.2441
0.2460
0.2480
0.2500
0.2520
0.2559
0.2570
0.2598
0.2638
0.2677
0.2717
0.2720
0.2756
0.2795
0.2813
0.2835
0.2874
0.2913
0.2950
0.2953
0.2992
0.3031
0.3071
0.3110
0.3125
0.3150
0.3189
0.3228
0.3268
0.3307
0.3320
0.3346
0.3386
0.3390
0.3425
0.3437
0.3465
l2
mm
37
37
37
37
37
37
37
37
42
42
42
42
42
42
42
42
42
42
47
47
47
47
47
47
47
47
47
47
53
53
53
53
53
53
53
53
53
53
53
60
60
60
60
60
60
60
60
60
60
60
60
67
67
67
67
67
l1
mm
86
86
86
86
86
86
86
86
93
93
93
93
93
93
93
93
93
93
101
101
101
101
101
101
101
101
101
101
109
109
109
109
109
109
109
109
109
109
109
117
117
117
117
117
117
117
117
117
117
117
117
125
125
125
125
125
Dormer EDP #
Stock
or
No.
e-Code
0395820 R002N10
0395837 R002N9
0381700 R0025.0
0395844 R002N8
0381717 R0025.1
0395851 R002N7
0381724 R0025.2
0381731 R0025.3
0381748 R0025.4
0395868 R002N3
0381755 R0025.5
0393567 R0027/32
0381762 R0025.6
0381779 R0025.7
0395875 R002N1
0381786 R0025.8
0381793 R0025.9
0381809 R0026.0
0381816 R0026.1
0381823 R0026.2
0395882 R002D
0381830 R0026.3
0393451 R0021/4
0381847 R0026.4
0381854 R0026.5
0395899 R002F
0381861 R0026.6
0381878 R0026.7
0381885 R0026.8
0381892 R0026.9
0395905 R002I
0381908 R0027.0
0381915 R0027.1
0393574 R0029/32
0381922 R0027.2
0381939 R0027.3
0381946 R0027.4
0395912 R002M
0381953 R0027.5
0381960 R0027.6
0381977 R0027.7
0381984 R0027.8
0381991 R0027.9
0393536 R0025/16
0382004 R0028.0
0382011 R0028.1
0382028 R0028.2
0382035 R0028.3
0382042 R0028.4
0395929 R002Q
0382059 R0028.5
0382066 R0028.6
0395936 R002R
0382073 R0028.7
0393475 R00211/32
0382080 R0028.8
T
U
3/8
25/64
Y
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
8.90
9.00
9.09
9.10
9.20
9.30
9.35
9.40
9.50
9.53
9.60
9.70
9.80
9.90
9.92
10.00
10.10
10.20
10.26
10.30
10.32
10.40
10.50
10.60
10.70
10.72
10.80
10.90
11.00
11.10
11.11
11.20
11.30
11.40
11.50
11.51
11.60
11.70
11.80
11.90
11.91
12.00
12.10
12.20
12.30
12.30
12.40
12.50
12.60
12.70
12.70
12.80
12.90
13.00
13.10
13.10
13.20
13.30
13.40
0.3504
0.3543
0.3580
0.3583
0.3622
0.3661
0.3680
0.3701
0.3740
0.3750
0.3780
0.3819
0.3858
0.3898
0.3906
0.3937
0.3976
0.4016
0.4040
0.4055
0.4063
0.4094
0.4134
0.4173
0.4213
0.4219
0.4252
0.4291
0.4331
0.4370
0.4375
0.4409
0.4449
0.4488
0.4528
0.4531
0.4567
0.4606
0.4646
0.4685
0.4687
0.4724
0.4764
0.4803
0.4843
0.4844
0.4882
0.4921
0.4961
0.5000
0.5000
0.5039
0.5079
0.5118
0.5156
0.5157
0.5197
0.5236
0.5276
67
67
67
67
67
67
67
67
67
70
70
70
70
70
70
70
74
74
74
74
74
74
74
74
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
93
98
98
125
125
125
125
125
125
125
125
125
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
151
151
151
151
151
151
151
151
151
151
151
151
151
151
151
151
151
151
160
160
0382097
0382103
0395943
0382110
0382127
0382134
0395950
0382141
0382158
0393529
0382165
0382172
0382189
0382196
0395967
0381427
0566497
0381434
0395974
0566503
0393482
0566510
0381441
0566527
0566534
0395981
0566541
0566558
0381458
0566565
0393550
0566572
0566589
0566596
0381465
0395998
0566602
0566619
0566626
0566633
0393499
0381472
0566640
0566657
0566664
0396001
0566671
0566985
0566688
0393444
0566695
0566701
0566718
0381489
0396018
0566725
0566732
0566749
0566756
R0028.9
R0029.0
R002T
R0029.1
R0029.2
R0029.3
R002U
R0029.4
R0029.5
R0023/8
R0029.6
R0029.7
R0029.8
R0029.9
R00225/64
R00210.0
R00210.1
R00210.2
R002Y
R00210.3
R00213/32
R00210.4
R00210.5
R00210.6
R00210.7
R00227/64
R00210.8
R00210.9
R00211.0
R00211.1
R0027/16
R00211.2
R00211.3
R00211.4
R00211.5
R00229/64
R00211.6
R00211.7
R00211.8
R00211.9
R00215/32
R00212.0
R00212.1
R00212.2
R00212.3
R00231/64
R00212.4
R00212.5
R00212.6
R0021/2
R00212.7
R00212.8
R00212.9
R00213.0
R00233/64
R00213.1
R00213.2
R00213.3
R00213.4
17
R002 - D12F
d1
Øh7
Inch
17/32
d1
Øh7
mm
13.49
13.50
13.60
13.70
d1
dec.
Inch
0.5313
0.5315
0.5354
0.5394
l2
mm
98
98
98
98
l1
mm
160
160
160
160
Dormer
Stock
No.
0393505
0566763
0566770
0566787
EDP #
or
e-Code
R00217/32
R00213.5
R00213.6
R00213.7
d1
Øh7
Inch
d1
Øh7
mm
13.80
13.90
14.00
d1
dec.
Inch
0.5433
0.5472
0.5512
l2
mm
98
98
98
l1
mm
160
160
160
Dormer
Stock
No.
0566794
0566800
0381496
EDP #
or
e-Code
R00213.8
R00213.9
R00214.0
D12F
Ɣ Short lengtth
Ɣ Heavy-duty
Ŷ
Ɣ
d1
Ø
Inch
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
18
d1
dec.
Inch
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
l2
Inch
1/2
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
l1
Inch
1.3/8
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.11/16
EDP #
or
e-Code
003355
003359
003365
003372
003379
003385
003389
003395
003401
003407
003414
003419
003423
003427
003430
003435
d1
Ø
Inch
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
EDP #
or
e-Code
003438
003440
003443
003446
003449
003451
003454
003457
003459
003460
003461
003462
003463
003464
D12W
Ɣ Short length
Ɣ Heavy-duty
Ŷ
Ɣ
d1
Ø
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
d1
dec.
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
l2
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
1“
l1
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
2.1/16
EDP #
or
e-Code
003350
003351
003352
003353
003354
003356
003357
003358
003360
003361
003362
003363
003364
003366
003367
003368
003369
003370
003371
003373
003374
003375
003376
003377
003378
003380
003381
003382
003383
003384
003386
003387
003388
003390
d1
Ø
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
l1
Inch
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
EDP #
or
e-Code
003391
003392
003393
003394
003396
003397
003398
003399
003400
003402
003403
003404
003405
003406
003408
003409
003410
003411
003412
003413
003415
003416
003417
003418
003420
003421
19
D31F
Ɣ Short length
Ŷ
Ɣ
d1
Ø
Inch
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
20
d1
dec.
Inch
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
l2
Inch
1/2
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.15/16
1.3/8
1.17/16
1.1/2
l1
Inch
1.1/2
1.1/2
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.111/16
EDP #
or
e-Code
003805
003809
003815
003822
003829
003835
003839
003845
003851
003857
003864
003869
003873
003877
003880
003885
d1
Ø
Inch
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.13/16
2.1/4
l1
Inch
2.3/4
2.13/16
2.15/16
3
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
EDP #
or
e-Code
003888
003890
003893
003896
003899
003901
003904
003907
003909
003910
003911
003912
003913
003914
D31W
Ɣ Short length
Ŷ
Ɣ
d1
Ø
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
d1
dec.
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
l2
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
l1
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
EDP #
or
e-Code
003800
003801
003802
003803
003804
003806
003807
003808
003810
003811
003812
003813
003814
003816
003817
003818
003819
003820
003821
003823
003824
003825
003826
003827
003828
003830
003831
003832
003833
003834
d1
Ø
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
15/16
15/16
15/16
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.15/16
1.15/16
l1
Inch
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
EDP #
or
e-Code
003836
003837
003838
003840
003841
003842
003843
003844
003846
003847
003848
003849
003850
003852
003853
003854
003855
003856
003858
003859
003860
003861
003862
003863
003865
003866
003867
003868
003870
003871
21
D33F - D33L
Ɣ Standard length
D33F
Ŷ
Ɣ
d1
Ø
Inch
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
d1
dec.
Inch
0.0312
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
1/2
3/4
3/4
7/8
1“
1.1/4
1.1/4
1.3/8
1.3/8
1.5/8
1.5/8
1.3/4
1.3/4
2“
2“
2.1/8
l1
Inch
1.1/4
1.1/2
1.1/2
1.3/4
2“
2.1/4
2.1/4
2.1/2
2.1/2
2.3/4
2.3/4
3“
3“
3.1/4
3.1/4
3.1/2
EDP #
or
e-Code
003501
003514
003518
003524
003531
003538
003544
003548
003554
003560
003566
003573
003578
003582
003586
003589
l2
Inch
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
l1
Inch
3.1/4
3.1/4
3.1/4
3.1/4
3.1/4
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.3/4
3.3/4
3.3/4
EDP #
or
e-Code
003581
003583
003584
003585
003587
003588
003590
003591
003592
003593
003595
003596
003598
003600
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
3“
3“
3“
3“
l1
Inch
3.1/2
3.3/4
3.3/4
4“
4“
4.1/4
4.1/4
4.1/2
4.1/2
4.1/2
4.1/2
4.3/4
4.3/4
4.3/4
4.3/4
EDP #
or
e-Code
003594
003597
003599
003602
003605
003608
003610
003613
003616
003618
003619
003620
003621
003622
003623
l2
Inch
2.3/8
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
l1
Inch
3.3/4
4“
4“
4“
4
4.1/4
4.1/4
4.1/2
4.1/2
4.1/2
4.1/2
EDP #
or
e-Code
003601
003603
003604
003606
003607
003609
003611
003612
003614
003615
003617
D33L
d1
Ø
A
B
C
D
F
G
H
I
J
K
L
M
N
O
22
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
0.3160
d1
Ø
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
D33W
Ɣ Standard length
Ŷ
Ɣ
d1
Ø
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
d1
dec.
Inch
0.0310
0.0320
0.0330
0.0350
0.0360
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
l2
Inch
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
l1
Inch
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
EDP #
or
e-Code
003500
003502
003503
003504
003505
003506
003507
003508
003509
003510
003511
003512
003513
003515
003516
003517
003519
003520
003521
003522
003523
003525
003526
003527
003528
003529
003530
003532
003533
003534
003535
003536
003537
003539
d1
Ø
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
l1
Inch
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
3“
3“
EDP #
or
e-Code
003540
003541
003542
003543
003545
003546
003547
003549
003550
003551
003552
003553
003555
003556
003557
003558
003559
003561
003562
003563
003564
003565
003567
003568
003569
003570
003571
003572
003574
003575
003576
003577
003579
003580
23
D33M - D21
Ɣ Standard length
D33M
Ŷ
Ɣ
d1
Ø
mm
0.80
0.90
1.00
1.50
2.00
2.05
2.50
3.00
3.30
3.50
4.00
4.50
5.00
5.50
d1
dec.
Inch
0.0315
0.0354
0.0394
0.0591
0.0787
0.0807
0.0984
0.1181
0.1299
0.1378
0.1575
0.1772
0.1969
0.2165
l2
mm
10
13
12
18
24
24
30
33
36
39
43
47
52
57
l1
mm
30
32
34
40
49
49
57
61
65
70
75
80
86
93
EDP #
or
e-Code
003470
003471
003472
003473
003474
003475
003476
003477
003624
003478
003626
003479
003630
003480
d1
Ø
mm
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
10.75
11.00
11.50
12.00
d1
dec.
Inch
0.2362
0.2559
0.2756
0.2953
0.3150
0.3346
0.3543
0.3740
0.3937
0.4134
0.4232
0.4331
0.4528
0.4724
l2
mm
57
63
69
69
75
75
81
81
87
87
94
94
94
101
l1
mm
93
101
109
109
117
117
125
125
133
133
142
142
142
151
EDP #
or
e-Code
003481
003482
003483
003484
003485
003486
003487
003488
003631
003489
003490
003491
003492
003493
D21
Ɣ Spade drill
Ɣ Broca “spade”
D21
Ŷ
Ɣ
d1
Ø
Inch
1/32
1/16
3/32
1/8
5/32
3/16
7/32
1/4
24
d1
dec.
Inch
0.0312
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
l2
Inch
3/16
5/16
3/8
7/16
15/32
9/16
19/32
11/16
l1
Inch
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
EDP #
or
e-Code
003200
003201
003202
003203
003204
003205
003206
003207
d1
Ø
Inch
9/32
5/16
3/8
7/16
1/2
d1
dec.
Inch
0.2812
0.3125
0.3750
0.4375
0.5000
l2
Inch
3/4
7/8
1“
1.1/16
1.1/8
l1
Inch
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
EDP #
or
e-Code
003208
003209
003211
003213
003215
DS-90 - DC
Ɣ Spotting Drill
Ɣ Forets de dessoudage
Ɣ Broca para centrados
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
d1
dec.
Inch
0.1250
0.1875
0.2500
0.3125
l2
Inch
9/16
3/4
1“
1“
l1
Inch
1.1/2
2“
2.1/2
2.1/2
EDP #
or
e-Code
003332
003334
003336
003338
d1
Ø
Inch
3/8
1/2
d1
dec.
Inch
0.3750
0.5000
l2
Inch
1“
1.1/4
l1
Inch
2.1/2
3“
EDP #
or
e-Code
003340
003342
DC
Ɣ Brocas de Centrar
Ɣ Foret à centrer
Ɣ Center Drill
Ŷ
Ɣ
Nr.
0
4
5
1
d1
Inch
1/32
1/8
3/16
3/64
l2
Inch
0.038
1/8
3/16
3/64
l1
Inch
1.1/4
2.1/8
2.3/4
1.1/4
d2
Ø
Inch
1/8
5/16
7/16
1/8
EDP #
or
e-Code
003251
003255
003256
003252
Nr.
2
6
3
d1
Inch
5/64
7/32
7/64
l2
Inch
5/64
7/32
7/64
l1
Inch
1.7/8
3“
2“
d2
Ø
Inch
3/16
1/2
1/4
EDP #
or
e-Code
003253
003257
003254
25
HSS Stub Drills
ProdType
A520
Icon1
Style:
Tool Material:
A597
A927
PFX
PFX
Photo
AMG Chart below.
example:
279 U
279 = SFM
U = Alpha Code to find your Feed Rate
Ŷ
Ɣ
ADX
Icon2
Standard:
Icon3
Direction of Cut:
Icon4
Depth of Cut:
Icon5
Tool Length:
7
Shank:
Helix:
Point Angle:
Point Style:
Special Standard:
26
3
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
Surface
RangeDim Feet per Minute (SFM)
LaunchLogoDate
Hardness
HB
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
HSS Stub Drills
2
Finish/Coating:
Cata28-29
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
M11
Ŷ187M
M12
Ŷ154M
M13
Ŷ131K
M14
Ŷ105I
M15
Ŷ69G
M16
Ɣ36E
M17
M18
M21
Ŷ98I
M22
Ŷ52I
M23
Ŷ66G
M24
M31
Ŷ157M
M32
Ŷ121K
M33
Ŷ98J
M34
Ŷ85F
M41
Ŷ112I
M42
Ŷ66G
M43
Ɣ13B
M51
Ɣ56I
M52
Ɣ36G
M53
Ɣ23E
M61
Ɣ131E
M62
Ŷ164I
M63
Ŷ148K
M64
Ɣ66F
M71
Ɣ180I
M72
Ŷ164M
M73
Ŷ121K
M74
Ŷ115I
M81
Ɣ213G
M82
Ŷ164G
M83
Ŷ115F
M91
M101
30
31-32
Ɣ184M
Ɣ157M
Ŷ131L
Ŷ131L
Ŷ115G
Ŷ98G
Ɣ121J
Ɣ102J
Ŷ85I
Ŷ82I
Ŷ69E
Ŷ62E
Ɣ56F
Ŷ30F
Ɣ36D
Ɣ49F
Ŷ23F
Ɣ30D
Ŷ184I
Ŷ157I
Ŷ115G
Ŷ89G
Ɣ157I
Ɣ95I
Ɣ52E
Ɣ79L
Ɣ46I
Ɣ33G
Ɣ112G
Ɣ98G
Ɣ75E
Ɣ56F
Ŷ98G
Ŷ59G
Ŷ33C
Ŷ49I
Ŷ30G
Ŷ20E
Ɣ213H
Ɣ230H
Ɣ115G
Ɣ102G
Ɣ230E
Ŷ148N
Ɣ131N
Ɣ98G
Ɣ180J
Ɣ131H
Ɣ194I
Ɣ164I
Ŷ157I
HSS Stub Drills (con‘t)
A022
QC41CO
QC41G
QC41
QC41P
M40CO
M41CO
M42CO
4ASMCO
EZ40G
EZ41G
EZ40P
EZ41P
R40C
R41C
R42C
4ASM
R40
R41
R42
L40
Drills
HSS Stub Drills
A720
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
33
34-35
36
37
38
Ŷ115A
Ŷ98A
Ŷ89A
Ŷ75A
Ɣ56A
Ɣ33A
Ŷ115K
Ŷ105K
Ŷ82I
Ŷ75H
Ŷ52G
Ɣ33E
Ɣ115J
Ɣ98H
Ɣ89G
Ɣ79F
Ŷ56E
Ŷ33D
Ŷ115F
Ŷ69F
Ŷ75H
Ŷ69F
Ɣ56D
Ŷ98F
Ŷ59F
Ŷ69H
Ŷ59F
Ɣ46D
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ɣ125K
Ɣ108H
Ɣ98G
Ɣ89G
Ŷ59F
Ŷ36E
Ɣ125K
Ɣ108H
Ɣ98G
Ɣ89G
Ŷ59F
Ŷ36E
Ŷ115F
Ŷ69F
Ŷ75H
Ŷ69F
Ɣ56D
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ɣ72A
Ɣ33A
Ɣ49A
Ŷ49G
Ɣ26I
Ɣ30E
Ɣ72E
Ɣ36G
Ɣ49C
Ɣ105H
Ɣ59F
Ɣ59D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ89H
Ɣ49F
Ɣ49D
Ŷ72F
Ŷ36H
Ŷ49D
Ŷ72F
Ŷ36H
Ŷ49D
Ɣ105H
Ɣ59F
Ɣ59D
Ɣ89H
Ɣ46F
Ɣ49D
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ98A
Ŷ79A
Ɣ66A
Ɣ46A
Ɣ75A
Ɣ56A
Ɣ26A
Ɣ33A
Ɣ23A
Ɣ13A
Ɣ115A
Ɣ131A
Ɣ115A
Ɣ89A
Ɣ115A
Ɣ98A
Ɣ89A
Ɣ89A
Ɣ157A
Ɣ82A
Ŷ105K
Ŷ82I
Ŷ66G
Ɣ52G
Ŷ82I
Ɣ46F
Ɣ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125K
Ɣ89I
Ɣ52I
Ŷ131F
Ŷ105K
Ŷ105J
Ɣ82J
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ɣ115H
Ɣ92D
Ɣ72E
Ŷ56E
Ŷ92F
Ŷ66D
Ŷ36C
Ɣ49G
Ŷ23E
Ɣ20B
Ɣ125H
Ɣ131F
Ɣ84H
Ɣ69F
Ɣ108J
Ɣ98I
Ɣ98H
Ɣ89F
Ŷ171H
Ŷ89H
Ɣ95F
Ɣ59D
Ŷ151H
Ŷ79H
Ɣ85C
Ŷ151H
Ŷ79H
Ɣ79F
Ŷ151H
Ŷ79H
Ɣ79F
Ɣ89H
Ɣ49F
Ɣ49F
Ɣ49F
Ɣ112K
Ɣ98F
Ɣ72F
Ŷ56F
Ŷ98G
Ŷ59F
Ŷ33C
Ŷ49H
Ŷ30F
Ŷ20C
Ɣ125I
Ɣ131K
Ɣ89J
Ɣ52I
Ɣ115K
Ɣ108J
Ɣ102I
Ɣ98G
Ɣ115M
Ɣ92K
Ɣ56I
Ŷ20C
Ŷ171H
Ŷ89H
Ɣ95F
Ɣ59D
Ɣ95H
Ɣ49F
Ɣ112K
Ɣ98F
Ɣ72F
Ŷ56F
Ŷ98G
Ŷ59F
Ŷ33C
Ŷ49H
Ŷ30F
Ŷ20C
Ɣ125I
Ɣ131K
Ɣ89J
Ɣ52I
Ɣ115K
Ɣ108J
Ɣ102I
Ɣ98G
Ɣ115M
Ɣ92K
Ɣ56I
Ŷ20C
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ɣ52E
Ɣ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ɣ52E
Ɣ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ɣ52E
Ɣ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ɣ52E
Ɣ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ɣ20C
Ɣ59H
Ŷ98I
Ŷ89H
Ŷ89H
39
Ɣ89I
Ɣ79H
Ɣ79H
Ɣ351H
Ɣ325H
Ɣ276H
40-41
42
43, 45 44, 45 46-48
Ɣ89H
Ɣ49F
Ɣ59H
Ɣ49F
Ŷ98I
Ŷ89H
Ŷ89H
Ŷ89I
Ŷ85H
Ŷ79H
Ŷ400H
Ŷ351H
Ŷ351H
Ŷ325H
Ŷ315H
Ŷ276H
49
50-52
53
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
27
A520
Ɣ ADX stub drill
Ɣ Broca ADX , serie extra corta
Foret extra-court ADX
Ŷ
Ɣ
d1
Øh8
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
28
d1
Øh8
mm
3.00
3.10
3.18
3.20
3.30
3.40
3.50
3.57
3.60
3.70
3.80
3.90
3.97
4.00
4.10
4.20
4.30
4.37
4.40
4.50
4.60
4.70
4.76
4.80
4.90
5.00
5.10
5.16
5.20
5.30
5.40
5.50
5.56
5.60
5.70
5.80
d1
dec.
Inch
0.1181
0.1220
0.1250
0.1259
0.1299
0.1338
0.1377
0.1405
0.1417
0.1456
0.1496
0.1535
0.1562
0.1574
0.1614
0.1653
0.1692
0.1720
0.1732
0.1771
0.1811
0.1850
0.1874
0.1889
0.1929
0.1968
0.2007
0.2031
0.2047
0.2086
0.2125
0.2165
0.2188
0.2204
0.2244
0.2283
1
l2
mm
16
18
18
18
18
20
20
20
20
20
22
22
22
22
22
22
24
24
24
24
24
24
26
26
26
26
26
26
26
26
28
28
28
28
28
28
l
mm
46
49
49
49
49
52
52
52
52
52
55
55
55
55
55
55
58
58
58
58
58
58
62
62
62
62
62
62
62
62
66
66
66
66
66
66
Stock #
0038901
0038918
0171264
0038925
0038932
0038949
0038956
0171271
0038963
0038970
0038987
0038994
0171288
0039007
0039014
0039021
0039038
0171295
0039045
0039052
0039069
0039076
0171301
0039083
0039090
0039106
0039113
0171318
0039120
0039137
0039144
0039151
0171325
0039168
0039175
0039182
EDP #
or
e-Code
A5203.0
A5203.1
A5201/8
A5203.2
A5203.3
A5203.4
A5203.5
A5209/64
A5203.6
A5203.7
A5203.8
A5203.9
A5205/32
A5204.0
A5204.1
A5204.2
A5204.3
A52011/64
A5204.4
A5204.5
A5204.6
A5204.7
A5203/16
A5204.8
A5204.9
A5205.0
A5205.1
A52013/64
A5205.2
A5205.3
A5205.4
A5205.5
A5207/32
A5205.6
A5205.7
A5205.8
d1
Øh8
Inch
15/64
1/4
17/64
9/32
19/64
5/16
21/64
d1
Øh8
mm
5.90
5.95
6.00
6.10
6.20
6.30
6.35
6.40
6.50
6.60
6.70
6.75
6.80
6.90
7.00
7.10
7.14
7.20
7.30
7.40
7.50
7.54
7.60
7.70
7.80
7.90
7.94
8.00
8.10
8.20
8.30
8.33
8.40
8.50
8.60
8.70
d1
dec.
Inch
0.2322
0.2342
0.2362
0.2401
0.2440
0.2480
0.2500
0.2519
0.2559
0.2598
0.2637
0.2657
0.2677
0.2716
0.2755
0.2795
0.2811
0.2834
0.2874
0.2913
0.2952
0.2968
0.2992
0.3031
0.3070
0.3110
0.3125
0.3149
0.3188
0.3228
0.3267
0.3279
0.3307
0.3346
0.3385
0.3425
1
l2
mm
28
28
28
31
31
31
31
31
31
31
31
34
34
34
34
34
34
34
34
34
34
37
37
37
37
37
37
37
37
37
37
37
37
37
40
40
l
mm
66
66
66
70
70
70
70
70
70
70
70
74
74
74
74
74
74
74
74
74
74
79
79
79
79
79
79
79
79
79
79
79
79
79
84
84
Stock #
0039199
0171332
0039205
0039212
0039229
0039236
0171349
0039243
0039250
0039267
0039274
0171356
0039281
0039298
0039304
0039311
0171363
0039328
0039335
0039342
0039359
0171370
0039366
0039373
0039380
0039397
0171387
0039403
0039410
0039427
0039434
0171394
0039441
0039458
0039465
0039472
EDP #
or
e-Code
A5205.9
A52015/64
A5206.0
A5206.1
A5206.2
A5206.3
A5201/4
A5206.4
A5206.5
A5206.6
A5206.7
A52017/64
A5206.8
A5206.9
A5207.0
A5207.1
A5209/32
A5207.2
A5207.3
A5207.4
A5207.5
A52019/64
A5207.6
A5207.7
A5207.8
A5207.9
A5205/16
A5208.0
A5208.1
A5208.2
A5208.3
A52021/64
A5208.4
A5208.5
A5208.6
A5208.7
A520
d1
Øh8
Inch
11/32
23/64
3/8
25/64
13/32
27/64
d1
Øh8
mm
8.73
8.80
8.90
9.00
9.10
9.13
9.20
9.30
9.40
9.50
9.53
9.60
9.70
9.80
9.90
9.92
10.00
10.10
10.20
10.30
10.32
10.40
10.50
10.60
10.70
10.72
10.80
10.90
d1
dec.
Inch
0.3437
0.3464
0.3503
0.3543
0.3582
0.3594
0.3622
0.3661
0.3700
0.3740
0.3750
0.3779
0.3818
0.3858
0.3897
0.3905
0.3937
0.3976
0.4015
0.4055
0.4062
0.4094
0.4133
0.4173
0.4212
0.4220
0.4251
0.4291
l2
mm
40
40
40
40
40
40
40
40
40
40
43
43
43
43
43
43
43
43
43
43
43
43
43
43
47
47
47
47
l1
mm
84
84
84
84
84
84
84
84
84
84
89
89
89
89
89
89
89
89
89
89
89
89
89
89
95
95
95
95
Stock #
0171400
0039489
0039496
0039502
0039519
0171417
0039526
0039533
0039540
0039557
0171424
0039564
0039571
0039588
0039595
0171431
0038598
0038604
0038611
0038628
0171448
0038635
0038642
0038659
0038666
0171455
0038673
0038680
EDP #
or
e-Code
A52011/32
A5208.8
A5208.9
A5209.0
A5209.1
A52023/64
A5209.2
A5209.3
A5209.4
A5209.5
A5203/8
A5209.6
A5209.7
A5209.8
A5209.9
A52025/64
A52010.0
A52010.1
A52010.2
A52010.3
A52013/32
A52010.4
A52010.5
A52010.6
A52010.7
A52027/64
A52010.8
A52010.9
d1
Øh8
Inch
7/16
29/64
15/32
31/64
1/2
d1
Øh8
mm
11.00
11.10
11.11
11.20
11.30
11.40
11.50
11.51
11.60
11.70
11.80
11.90
11.91
12.00
12.10
12.20
12.30
12.30
12.40
12.50
12.60
12.70
12.70
12.80
12.90
13.00
d1
dec.
Inch
0.4330
0.4370
0.4374
0.4409
0.4448
0.4488
0.4527
0.4531
0.4566
0.4606
0.4645
0.4685
0.4688
0.4724
0.4763
0.4803
0.4842
0.4842
0.4881
0.4921
0.4960
0.5000
0.5000
0.5039
0.5078
0.5118
l2
mm
47
47
47
47
47
47
47
47
47
47
47
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
l1
mm
95
95
95
95
95
95
95
95
95
95
95
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
Stock #
0038697
0038703
0171462
0038710
0038727
0038734
0038741
0171479
0038758
0038765
0038772
0038789
0171486
0038796
0038802
0038819
0038826
0171493
0038833
0038840
0038857
0038864
0171509
0038871
0038888
0038895
EDP #
or
e-Code
A52011.0
A52011.1
A5207/16
A52011.2
A52011.3
A52011.4
A52011.5
A52029/64
A52011.6
A52011.7
A52011.8
A52011.9
A52015/32
A52012.0
A52012.1
A52012.2
A52012.3
A52031/64
A52012.4
A52012.5
A52012.6
A52012.7
A5201/2
A52012.8
A52012.9
A52013.0
29
A597
Ɣ PFX stub drill
Ɣ Foret PFX extra-court
Ɣ
Ŷ
d1Øh8
mm
2.50
2.60
3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
3.80
3.90
4.00
4.10
4.20
4.30
4.40
4.50
4.60
4.70
4.80
4.90
5.00
5.10
5.20
5.30
5.40
5.50
5.60
5.70
5.80
5.90
6.00
6.10
6.20
6.30
6.40
6.50
6.60
6.70
6.80
6.90
7.00
7.10
7.20
7.30
2)
d1dec.
Inch
0.0984
0.1023
0.1181
0.1220
0.1259
0.1299
0.1338
0.1377
0.1417
0.1456
0.1496
0.1535
0.1574
0.1614
0.1653
0.1692
0.1732
0.1771
0.1811
0.1850
0.1889
0.1929
0.1968
0.2007
0.2047
0.2086
0.2125
0.2165
0.2204
0.2244
0.2283
0.2322
0.2362
0.2401
0.2440
0.2480
0.2519
0.2559
0.2598
0.2637
0.2677
0.2716
0.2755
0.2795
0.2834
0.2874
l2
mm
14
14
16
18
18
18
20
20
20
20
22
22
22
22
22
24
24
24
24
24
26
26
26
26
26
26
28
28
28
28
28
28
28
31
31
31
31
31
31
31
34
34
34
34
34
34
l1
mm
43
43
46
49
49
49
52
52
52
52
55
55
55
55
55
58
58
58
58
58
62
62
62
62
62
62
66
66
66
66
66
66
66
70
70
70
70
70
70
70
74
74
74
74
74
74
Stock #
0125557
0125564
0125571
0587645
0587652
0125588
0125595
0125601
0587669
0587676
0587683
0587690
0125618
0125625
0125632
0125649
0587706
0125656
0587713
0587720
0587737
0125663
0125670
0125687
0587744
0587751
0587768
0125694
0587775
0587782
0587799
0587805
0125700
0587812
0587829
0587836
0587843
0125717
0587850
0587867
0125724
0125731
0125748
0587874
0587881
0587898
Overall lengths longer than standards
30
Ɣ Broca PFX Extra Corta
EDP # or
e-Code
A5972.5
A5972.6
A5973.0
A5973.1
A5973.2
A5973.3
A5973.4
A5973.5
A5973.6
A5973.7
A5973.8
A5973.9
A5974.0
A5974.1
A5974.2
A5974.3
A5974.4
A5974.5
A5974.6
A5974.7
A5974.8
A5974.9
A5975.0
A5975.1
A5975.2
A5975.3
A5975.4
A5975.5
A5975.6
A5975.7
A5975.8
A5975.9
A5976.0
A5976.1
A5976.2
A5976.3
A5976.4
A5976.5
A5976.6
A5976.7
A5976.8
A5976.9
A5977.0
A5977.1
A5977.2
A5977.3
d1Øh8
mm
7.40
7.50
7.60
7.70
7.80
7.90
8.00
8.10
8.20
8.30
8.40
8.50
8.60
8.70
8.80
8.90
9.00
9.10
9.20
9.30
9.40
9.50
9.60
9.70
9.80
9.90
10.00
10.20
10.30
10.40
10.50
10.80
11.00
11.20
11.50
11.80
12.00
12.20
12.50
12.80
13.00
13.50
14.00
14.50
15.00
15.50
16.00
d1dec.
Inch
0.2913
0.2952
0.2992
0.3031
0.3070
0.3110
0.3149
0.3188
0.3228
0.3267
0.3307
0.3346
0.3385
0.3425
0.3464
0.3503
0.3543
0.3582
0.3622
0.3661
0.3700
0.3740
0.3779
0.3818
0.3858
0.3897
0.3937
0.4015
0.4055
0.4094
0.4133
0.4251
0.4330
0.4409
0.4527
0.4645
0.4724
0.4803
0.4921
0.5039
0.5118
0.5314
0.5511
0.5708
0.5905
0.6102
0.6299
l2
mm
34
34
37
37
37
37
37
37
37
37
37
37
40
40
40
40
40
40
40
40
40
40
43
43
43
43
43
43
43
43
43
47
50
50
50
50
57
57
57
57
57
62
62
62
63
63
67
l1
mm
74
74
79
79
79
79
79
79
79
79
79
79
84
84
84
84
84
84
84
84
84
84
89
89
89
89
89
89
89
89
89
95
95
95
95
95
102
102
102
102
102
107
107
111
111
115
115
Stock #
0587904
0125755
0587911
0587928
0587935
0587942
0125762
0587959
0587966
0587973
0587980
0125779
0125786
0125793
0587997
0588000
0125809
0588017
0588024
0588031
0588048
0125816
0588055
0588062
0588079
0588086
0125465
0125472
0125489
0125496
0125502
0587522
0125519
0587539
0125526
0587546
0125533
0125540
0587553
0587560
0587577
0587584
0587591
0587607
0587614
0587621
0587638
EDP # or
e-Code
A5977.4
A5977.5
A5977.6
A5977.7
A5977.8
A5977.9
A5978.0
A5978.1
A5978.2
A5978.3
A5978.4
A5978.5
A5978.6
A5978.7
A5978.8
A5978.9
A5979.0
A5979.1
A5979.2
A5979.3
A5979.4
A5979.5
A5979.6
A5979.7
A5979.8
A5979.9
A59710.0
A59710.2
A59710.3
A59710.4
A59710.5
A59710.8
A59711.0
A59711.2
A59711.5
A59711.8
A59712.0
A59712.2
A59712.5
A59712.8
A59713.0
A59713.5
A59714.0
A59714.5
A59715.0
A59715.5
A59716.0
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
A927
Ɣ PFX stub drill
Ɣ Foret PFX extra-court
Ɣ Broca PFX Extra Corta
Ŷ
Ɣ
d1
Øh8
Inch
1/16
5/64
3/32
7/64
1/8
9/64
d1
Øh8
mm
1.00
1.10
1.20
1.30
1.40
1.50
1.59
1.60
1.70
1.80
1.90
1.98
2.00
2.10
2.20
2.30
2.38
2.40
2.50
2.60
2.70
2.78
2.80
2.90
3.00
3.10
3.18
3.20
3.30
3.40
3.50
3.57
3.60
3.70
3.80
3.90
d1
dec.
Inch
0.0393
0.0433
0.0472
0.0511
0.0551
0.0590
0.0625
0.0629
0.0669
0.0708
0.0748
0.0779
0.0787
0.0826
0.0866
0.0905
0.0937
0.0944
0.0984
0.1023
0.1062
0.1094
0.1102
0.1141
0.1181
0.1220
0.1251
0.1259
0.1299
0.1338
0.1377
0.1405
0.1417
0.1456
0.1496
0.1535
l2
mm
6
7
8
8
9
9
10
10
10
11
11
12
12
12
13
13
14
14
14
14
16
16
16
16
16
18
18
18
18
20
20
20
20
20
22
22
l1
mm
26
28
30
30
32
32
34
34
34
36
36
38
38
38
40
40
43
43
43
43
46
46
46
46
46
49
49
49
49
52
52
52
52
52
55
55
Stock #
0147382
0147399
0147405
0147412
0147429
0147436
0174357
0147443
0147450
0147467
0147474
0174364
0147481
0147498
0147504
0147511
0174371
0147528
0147535
0147542
0147559
0174388
0147566
0147573
0147580
0147597
0174395
0147603
0147610
0147627
0147634
0174401
0147641
0147658
0147665
0147672
EDP #
or
e-Code
A9271.0
A9271.1
A9271.2
A9271.3
A9271.4
A9271.5
A9271/16
A9271.6
A9271.7
A9271.8
A9271.9
A9275/64
A9272.0
A9272.1
A9272.2
A9272.3
A9273/32
A9272.4
A9272.5
A9272.6
A9272.7
A9277/64
A9272.8
A9272.9
A9273.0
A9273.1
A9271/8
A9273.2
A9273.3
A9273.4
A9273.5
A9279/64
A9273.6
A9273.7
A9273.8
A9273.9
d1
Øh8
Inch
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
d1
Øh8
mm
3.97
4.00
4.10
4.20
4.30
4.37
4.40
4.50
4.60
4.70
4.76
4.80
4.90
5.00
5.10
5.16
5.20
5.30
5.40
5.50
5.56
5.60
5.70
5.80
5.90
5.95
6.00
6.10
6.20
6.30
6.35
6.40
6.50
6.60
6.70
6.75
d1
dec.
Inch
0.1562
0.1574
0.1614
0.1653
0.1692
0.1720
0.1732
0.1771
0.1811
0.1850
0.1874
0.1889
0.1929
0.1968
0.2007
0.2031
0.2047
0.2086
0.2125
0.2165
0.2188
0.2204
0.2244
0.2283
0.2322
0.2342
0.2362
0.2401
0.2440
0.2480
0.2500
0.2519
0.2559
0.2598
0.2637
0.2657
l2
mm
22
22
22
22
24
24
24
24
24
24
26
26
26
26
26
26
26
26
28
28
28
28
28
28
28
28
28
31
31
31
31
31
31
31
31
34
l1
mm
55
55
55
55
58
58
58
58
58
58
62
62
62
62
62
62
62
62
66
66
66
66
66
66
66
66
66
70
70
70
70
70
70
70
70
74
Stock #
0174418
0147689
0147696
0147702
0147719
0174425
0147726
0147733
0147740
0147757
0174432
0147764
0147771
0147788
0147795
0174449
0147801
0147818
0147825
0147832
0174456
0147849
0147856
0147863
0147870
0174463
0147887
0147894
0147900
0147917
0174470
0147924
0147931
0147948
0147955
0174487
EDP #
or
e-Code
A9275/32
A9274.0
A9274.1
A9274.2
A9274.3
A92711/64
A9274.4
A9274.5
A9274.6
A9274.7
A9273/16
A9274.8
A9274.9
A9275.0
A9275.1
A92713/64
A9275.2
A9275.3
A9275.4
A9275.5
A9277/32
A9275.6
A9275.7
A9275.8
A9275.9
A92715/64
A9276.0
A9276.1
A9276.2
A9276.3
A9271/4
A9276.4
A9276.5
A9276.6
A9276.7
A92717/64
31
A927
d1
Øh8
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
2)
d1
Øh8
mm
6.80
6.90
7.00
7.10
7.14
7.20
7.30
7.40
7.50
7.54
7.60
7.70
7.80
7.90
7.94
8.00
8.10
8.20
8.30
8.33
8.40
8.50
8.60
8.70
8.73
8.80
8.90
9.00
9.10
9.13
9.20
9.30
9.40
9.50
9.53
9.60
9.70
9.80
d1
dec.
Inch
0.2677
0.2716
0.2755
0.2795
0.2811
0.2834
0.2874
0.2913
0.2952
0.2968
0.2992
0.3031
0.3070
0.3110
0.3125
0.3149
0.3188
0.3228
0.3267
0.3279
0.3307
0.3346
0.3385
0.3425
0.3437
0.3464
0.3503
0.3543
0.3582
0.3594
0.3622
0.3661
0.3700
0.3740
0.3751
0.3779
0.3818
0.3858
l2
mm
34
34
34
34
34
34
34
34
34
37
37
37
37
37
37
37
37
37
37
37
37
37
40
40
40
40
40
40
40
40
40
40
40
40
43
43
43
43
l1
mm
74
74
74
74
74
74
74
74
74
79
79
79
79
79
79
79
79
79
79
79
79
79
84
84
84
84
84
84
84
84
84
84
84
84
89
89
89
89
Stock #
0147962
0147979
0147986
0147993
0174494
0148006
0148013
0148020
0148037
0174500
0148044
0148051
0148068
0148075
0174517
0148082
0148099
0148105
0148112
0174524
0148129
0148136
0148143
0148150
0174531
0148167
0148174
0148181
0148198
0174548
0148204
0148211
0148228
0148235
0174555
0148242
0148259
0148266
EDP #
or
e-Code
A9276.8
A9276.9
A9277.0
A9277.1
A9279/32
A9277.2
A9277.3
A9277.4
A9277.5
A92719/64
A9277.6
A9277.7
A9277.8
A9277.9
A9275/16
A9278.0
A9278.1
A9278.2
A9278.3
A92721/64
A9278.4
A9278.5
A9278.6
A9278.7
A92711/32
A9278.8
A9278.9
A9279.0
A9279.1
A92723/64
A9279.2
A9279.3
A9279.4
A9279.5
A9273/8
A9279.6
A9279.7
A9279.8
d1
Øh8
Inch
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
Øh8
mm
9.90
9.92
10.00
10.20
10.30
10.32
10.40
10.50
10.72
10.80
11.00
11.11
11.20
11.50
11.51
11.80
11.91
12.00
12.20
12.30
12.50
12.70
12.80
13.00
13.50
14.00
14.50
15.00
15.50
16.00
17.00
17.50
18.00
19.00
20.00
d1
dec.
Inch
0.3897
0.3905
0.3937
0.4015
0.4055
0.4062
0.4094
0.4133
0.4220
0.4251
0.4330
0.4374
0.4409
0.4527
0.4531
0.4645
0.4688
0.4724
0.4803
0.4842
0.4921
0.5000
0.5039
0.5118
0.5314
0.5511
0.5708
0.5905
0.6102
0.6299
0.6692
0.6889
0.7086
0.7480
0.7874
l2
mm
43
43
43
43
43
43
43
43
50
50
50
50
50
50
50
50
57
57
57
57
57
57
57
57
62
62
62
63
63
67
71
75
75
79
81
l1
mm
89
89
89
89
89
89
89
89
95
95
95
95
95
95
95
95
102
102
102
102
102
102
102
102
107
107
107
111
111
115
119
123
123
127
131
Stock #
0148273
0174562
0148280
0148297
0148303
0174579
0148310
0148327
0174586
0148334
0148341
0174593
0148358
0148365
0174609
0148372
0174616
0148389
0148396
0174623
0148402
0174630
0148419
0148426
0302804
0308516
0302811
0302828
0302835
0302842
0302859
0588437
0302866
0302873
0302880
EDP #
or
e-Code
A9279.9
A92725/64
A92710.0
A92710.2
A92710.3
A92713/32
A92710.4
A92710.5
A92727/64
A92710.8
A92711.0
A9277/16
A92711.2
A92711.5
A92729/64
A92711.8
A92715/32
A92712.0
A92712.2
A92731/64
A92712.5
A9271/2
A92712.8
A92713.0
A92713.5
A92714.0
A92714.5
A92715.0
A92715.5
A92716.0
A92717.0
A92717.5
A92718.0
A92719.0
A92720.0
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
Overall lengths longer than standards
32
A720
Ɣ Micro drill
Ɣ Micro foret
Ɣ Micro Broca
Ŷ
Ɣ
d1
Ø
mm
0.15
0.16
0.17
0.18
0.20
0.22
0.25
0.27
0.28
0.30
0.35
0.38
0.39
0.40
0.45
0.50
d1
dec.
Inch
0.0059
0.0063
0.0067
0.0070
0.0078
0.0086
0.0098
0.0106
0.0110
0.0118
0.0137
0.0149
0.0154
0.0157
0.0177
0.0196
l2
mm
1.0
1.4
1.4
1.4
1.8
1.8
2.2
2.2
2.2
2.2
2.8
2.8
3.6
3.6
3.6
4.0
l1
mm
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
d2
Øh8
mm
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Stock #
0044988
0566961
0612057
0044995
0045008
0045015
0045022
0566978
0045039
0045046
0045053
0045060
0045077
0045084
0045107
0045114
EDP #
or
e-Code
A720.15
A720.16
A720.17
A720.18
A720.2
A720.22
A720.25
A720.27
A720.28
A720.3
A720.35
A720.38
A720.39
A720.4
A720.45
A720.5
d1
Ø
mm
0.55
0.60
0.62
0.65
0.70
0.75
0.80
0.85
0.90
0.95
1.00
1.05
1.10
1.20
1.30
1.40
d1
dec.
Inch
0.0217
0.0236
0.0244
0.0256
0.0276
0.0295
0.0315
0.0335
0.0354
0.0374
0.0394
0.0413
0.0433
0.0472
0.0512
0.0551
l2
mm
4.5
4.5
5.0
5.0
5.6
5.6
6.3
6.3
7.1
7.1
8.0
8.0
9.0
10.0
10.0
11.2
l1
mm
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
d2
Øh8
mm
1
1
1
1
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
Stock #
0612064
0045121
0612071
0612088
0615577
0612101
0615584
0612125
0615591
0612149
0615607
0612163
0615614
0615621
0615638
0615645
EDP #
or
e-Code
A720.55
A720.6
A720.62
A720.65
A720.7
A720.75
A720.8
A720.85
A720.9
A720.95
A7201.0
A7201.05
A7201.1
A7201.2
A7201.3
A7201.4
33
A022
Ɣ Stub drill
Bright below 2.0 mm, TiN Tipped and split point 2.0 mm and above
Ŷ
Ɣ
d1
Øh8
Inch
1/32
3/64
1/16
5/64
3/32
7/64
1/8
34
d1
Øh8
mm
0.50
0.60
0.70
0.79
0.80
0.90
1.00
1.10
1.19
1.20
1.30
1.40
1.50
1.59
1.60
1.70
1.80
1.90
1.98
2.00
2.10
2.20
2.25
2.30
2.38
2.40
2.50
2.60
2.65
2.70
2.78
2.80
2.90
3.00
3.10
3.18
d1
dec.
Inch
0.0196
0.0236
0.0275
0.0312
0.0314
0.0354
0.0393
0.0433
0.0468
0.0472
0.0511
0.0551
0.0590
0.0625
0.0629
0.0669
0.0708
0.0748
0.0779
0.0787
0.0826
0.0866
0.0885
0.0905
0.0937
0.0944
0.0984
0.1023
0.1043
0.1062
0.1094
0.1102
0.1141
0.1181
0.1220
0.1251
l2
mm
3
3.5
4.5
13
5
5.5
6
7
13
8
8
9
9
16
10
10
11
11
17
12
12
13
13
13
20
14
14
14
14
16
22
16
16
16
18
23
l1
mm
20
21
23
35
24
25
26
28
35
30
30
32
32
41
34
34
36
36
43
38
38
40
40
40
45
43
43
43
43
46
47
46
46
46
49
49
Stock #
0600382
0600399
0600405
0600542
0600412
0600429
0600436
0600443
0600559
0600450
0600467
0600474
0600481
0600535
0600498
0600504
0600511
0600528
0600566
0600115
0600122
0600139
0600146
0600153
0600238
0600160
0600177
0600184
0600191
0600207
0600245
0600214
0600221
0588697
0589083
0588727
EDP #
or
e-Code
A022.5
A022.6
A022.7
A0221/32
A022.8
A022.9
A0221.0
A0221.1
A0223/64
A0221.2
A0221.3
A0221.4
A0221.5
A0221/16
A0221.6
A0221.7
A0221.8
A0221.9
A0225/64
A0222.0
A0222.1
A0222.2
A0222.25
A0222.3
A0223/32
A0222.4
A0222.5
A0222.6
A0222.65
A0222.7
A0227/64
A0222.8
A0222.9
A0223.0
A0223.1
A0221/8
d1
Øh8
Inch
d1
Øh8
mm
3.20
3.25
3.30
3.40
3.50
9/64 3.57
3.60
3.70
3.80
3.90
5/32 3.97
4.00
4.10
4.20
4.30
11/64 4.37
4.40
4.50
4.60
4.70
3/16 4.76
4.80
4.90
5.00
5.10
13/64 5.16
5.20
5.30
5.40
5.50
7/32 5.56
5.60
5.70
5.80
5.90
15/64 5.95
d1
dec.
Inch
0.1259
0.1279
0.1299
0.1338
0.1377
0.1405
0.1417
0.1456
0.1496
0.1535
0.1562
0.1574
0.1614
0.1653
0.1692
0.1720
0.1732
0.1771
0.1811
0.1850
0.1874
0.1889
0.1929
0.1968
0.2007
0.2031
0.2047
0.2086
0.2125
0.2165
0.2188
0.2204
0.2244
0.2283
0.2322
0.2342
l2
mm
18
18
18
20
20
25
20
20
22
22
26
22
22
22
24
28
24
24
24
24
30
26
26
26
26
31
26
26
28
28
33
28
28
28
28
34
l1
mm
49
49
49
52
52
50
52
52
55
55
53
55
55
55
58
55
58
58
58
58
57
62
62
62
62
58
62
62
66
66
61
66
66
66
66
63
Stock #
0589090
0589106
0589113
0589120
0589137
0589878
0589144
0589151
0589168
0589175
0589410
0589205
0589212
0589229
0589236
0588932
0589243
0589250
0589267
0589274
0589182
0589281
0589298
0589304
0589311
0589014
0589328
0589335
0589342
0589359
0589649
0589366
0589373
0589380
0589397
0589069
EDP #
or
e-Code
A0223.2
A0223.25
A0223.3
A0223.4
A0223.5
A0229/64
A0223.6
A0223.7
A0223.8
A0223.9
A0225/32
A0224.0
A0224.1
A0224.2
A0224.3
A02211/64
A0224.4
A0224.5
A0224.6
A0224.7
A0223/16
A0224.8
A0224.9
A0225.0
A0225.1
A02213/64
A0225.2
A0225.3
A0225.4
A0225.5
A0227/32
A0225.6
A0225.7
A0225.8
A0225.9
A02215/64
A022
d1
Øh8
Inch
d1
Øh8
mm
6.00
6.10
6.20
6.30
1/4
6.35
6.40
6.50
6.60
6.70
6.80
6.90
7.00
7.10
9/32 7.14
7.20
7.30
7.40
7.50
7.60
7.70
7.80
7.90
5/16 7.94
8.00
8.10
8.20
8.30
8.40
8.50
8.60
8.70
11/32 8.73
8.80
8.90
9.00
9.10
9.20
9.30
9.40
9.50
d1
dec.
Inch
0.2362
0.2401
0.2440
0.2480
0.2500
0.2519
0.2559
0.2598
0.2637
0.2677
0.2716
0.2755
0.2795
0.2811
0.2834
0.2874
0.2913
0.2952
0.2992
0.3031
0.3070
0.3110
0.3125
0.3149
0.3188
0.3228
0.3267
0.3307
0.3346
0.3385
0.3425
0.3437
0.3464
0.3503
0.3543
0.3582
0.3622
0.3661
0.3700
0.3740
l2
mm
28
31
31
31
36
31
31
31
31
34
34
34
34
40
34
34
34
34
37
37
37
37
43
37
37
37
37
37
37
40
40
45
40
40
40
40
40
40
40
40
l1
mm
66
70
70
70
65
70
70
70
70
74
74
74
74
70
74
74
74
74
79
79
79
79
73
79
79
79
79
79
79
84
84
78
84
84
84
84
84
84
84
84
Stock #
0589434
0589441
0589458
0589465
0588710
0589472
0589489
0589496
0589502
0589519
0589526
0589533
0589540
0589861
0589557
0589564
0589571
0589588
0589595
0589601
0589618
0589625
0589403
0589656
0589663
0589670
0589687
0589694
0589700
0589717
0589724
0588925
0589731
0589748
0589755
0589762
0589779
0589786
0589793
0589809
EDP #
or
e-Code
A0226.0
A0226.1
A0226.2
A0226.3
A0221/4
A0226.4
A0226.5
A0226.6
A0226.7
A0226.8
A0226.9
A0227.0
A0227.1
A0229/32
A0227.2
A0227.3
A0227.4
A0227.5
A0227.6
A0227.7
A0227.8
A0227.9
A0225/16
A0228.0
A0228.1
A0228.2
A0228.3
A0228.4
A0228.5
A0228.6
A0228.7
A02211/32
A0228.8
A0228.9
A0229.0
A0229.1
A0229.2
A0229.3
A0229.4
A0229.5
d1
Øh8
mm
9.53
9.60
9.70
9.80
9.90
10.00
10.10
10.20
10.30
13/32 10.32
10.40
10.50
10.60
10.70
10.80
10.90
11.00
11.10
7/16 11.11
11.20
11.30
11.50
11.60
11.70
11.80
11.90
12.00
12.10
12.20
12.50
1/2
12.70
13.00
13.50
14.00
9/16 14.29
14.50
15.00
15.50
5/8
15.88
16.00
d1
Øh8
Inch
3/8
d1
dec.
Inch
0.3751
0.3779
0.3818
0.3858
0.3897
0.3937
0.3976
0.4015
0.4055
0.4062
0.4094
0.4133
0.4173
0.4212
0.4251
0.4291
0.4330
0.4370
0.4374
0.4409
0.4448
0.4527
0.4566
0.4606
0.4645
0.4685
0.4724
0.4763
0.4803
0.4921
0.5000
0.5118
0.5314
0.5511
0.5625
0.5708
0.5905
0.6102
0.6251
0.6299
l2
mm
48
43
43
43
43
43
43
43
43
51
43
43
43
47
47
47
47
47
54
47
47
47
47
47
47
51
51
51
51
51
60
51
54
54
67
56
56
58
73
58
l1
mm
81
89
89
89
89
89
89
89
89
86
89
89
89
95
95
95
95
95
89
95
95
95
95
95
95
102
102
102
102
102
98
102
107
107
105
111
111
115
111
115
Stock #
0589199
0589816
0589823
0589830
0589847
0588734
0588741
0588758
0588765
0589007
0588772
0588789
0588796
0588802
0588819
0588826
0588833
0588840
0589632
0588857
0588864
0588871
0588888
0588895
0588901
0588918
0588949
0588956
0588963
0588970
0588703
0588987
0588994
0589021
0589854
0589038
0589045
0589052
0589427
0589076
EDP #
or
e-Code
A0223/8
A0229.6
A0229.7
A0229.8
A0229.9
A02210.0
A02210.1
A02210.2
A02210.3
A02213/32
A02210.4
A02210.5
A02210.6
A02210.7
A02210.8
A02210.9
A02211.0
A02211.1
A0227/16
A02211.2
A02211.3
A02211.5
A02211.6
A02211.7
A02211.8
A02211.9
A02212.0
A02212.1
A02212.2
A02212.5
A0221/2
A02213.0
A02213.5
A02214.0
A0229/16
A02214.5
A02215.0
A02215.5
A0225/8
A02216.0
35
QC41CO
Ɣ Stub drill
Ɣ Wide-land parabolic flute
Ŷ
Ɣ
d1
Ø
1/16
5/64
3/32
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
11/64
17
16
15
36
d1
dec.
Inch
0.0625
0.0781
0.0938
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
l2
Inch
5/8
11/16
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
15/16
1“
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
EDP #
or
e-Code
060104
060105
060106
060240
060239
060238
060237
060236
060107
060235
060234
060233
060232
060231
060108
060230
060229
060228
060109
060227
060226
060225
060224
060223
060110
060222
060221
060220
060219
060218
060111
060217
060216
060215
d1
Ø
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
EDP #
or
e-Code
060214
060213
060112
060212
060211
060210
060209
060208
060207
060113
060206
060205
060204
060203
060114
060202
060201
060115
060116
060117
060118
060119
060120
060121
060122
060123
060124
060125
060126
060127
060128
060129
060130
060131
060132
QC41G
Ɣ Stub drill
Foret extra-court
Ŷ
Ɣ
d1
Ø
1/16
5/64
3/32
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
11/64
17
16
15
d1
dec.
Inch
0.0625
0.0781
0.0938
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
l2
Inch
5/8
11/16
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
15/16
1“
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
EDP #
or
e-Code
062304
062305
062306
061440
061439
061438
061437
061436
062307
061435
061434
061433
061432
061431
062308
061430
061429
061428
062309
061427
061426
061425
061424
061423
062310
061422
061421
061420
061419
061418
062311
061417
061416
061415
d1
Ø
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.3/4
3.3/4
EDP #
or
e-Code
061414
061413
062312
061412
061411
061410
061409
061408
061407
062313
061406
061405
061404
061403
062314
061402
061401
062315
062316
062317
062318
062319
062320
062321
062322
062323
062324
062325
062326
062327
062328
062329
062330
062331
062332
37
QC41
Ɣ Stub drill
Ŷ
Ɣ
d1
Ø
1/16
5/64
3/32
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
11/64
17
16
15
38
d1
dec.
Inch
0.0625
0.0781
0.0938
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
l2
Inch
5/8
11/16
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
15/16
1“
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
EDP #
or
e-Code
055704
055705
055706
056040
056039
056038
056037
056036
055707
056035
056034
056033
056032
056031
055708
056030
056029
056028
055709
056027
056026
056025
056024
056023
055710
056022
056021
056020
056019
056018
055711
056017
056016
056015
d1
Ø
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.3/4
3.3/4
EDP #
or
e-Code
056014
056013
055712
056012
056011
056010
056009
056008
056007
055713
056006
056005
056004
056003
055714
056002
056001
055715
055716
055717
055718
055719
055720
055721
055722
055723
055724
055725
055726
055727
055728
055729
055730
055731
055732
QC41P
Ɣ Stub drill
Ŷ
Ɣ
d1
Ø
1/16
5/64
3/32
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
l2
Inch
5/8
11/16
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
15/16
1“
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
EDP #
or
e-Code
058304
058305
058306
060040
060039
060038
060037
060036
058307
060035
060034
060033
060032
060031
058308
060030
060029
060028
058309
060027
060026
060025
060024
060023
058310
060022
060021
060020
060019
060018
058311
060017
060016
060015
060014
060013
058312
060012
060011
060010
060009
060008
060007
058313
d1
Ø
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
d1
dec.
Inch
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
2.3/8
2.3/8
2.1/2
2.1/2
2.5/8
2.5/8
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
l1
Inch
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.1/2
4.1/2
4.5/8
4.5/8
EDP #
or
e-Code
060006
060005
060004
060003
058314
060002
060001
058315
058316
058317
058318
058319
058320
058321
058322
058323
058324
058325
058326
058327
058328
058329
058330
058331
058332
058333
058334
058335
058336
058337
058338
058339
058340
058341
058342
058343
058344
39
M40CO - M42CO
Ɣ Stub drill
M40CO
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
l2
Inch
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
EDP #
or
e-Code
040304
040305
040306
040307
040308
040309
040310
040311
040312
040313
040314
040315
040316
040317
040318
040319
040320
040321
040322
040323
040324
040325
040326
040327
d1
Ø
Inch
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
d1
dec.
Inch
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
l2
Inch
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
2.3/8
2.3/8
2.1/2
2.1/2
2.5/8
2.5/8
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
3“
3“
3.1/8
3.1/8
l1
Inch
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.1/2
4.1/2
4.5/8
4.5/8
4.3/4
4.3/4
5“
5“
EDP #
or
e-Code
040328
040329
040330
040331
040332
046033
046034
046035
046036
046037
046038
046039
046040
046041
046042
046043
046044
046045
046046
046047
046048
M42CO
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
40
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
1.5/16
1.3/8
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.9/16
1.9/16
1.5/8
l1
Inch
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.11/16
2.11/16
2.11/16
2.11/16
2.3/4
2.3/4
2.13/16
EDP #
or
e-Code
042301
042302
042303
042304
042305
042306
042307
042308
042309
042310
042311
042312
042313
042314
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.13/16
1.7/8
1.7/8
1.15/16
1.15/16
2“
l1
Inch
2.15/16
2.15/16
3“
3“
3.1/16
3.1/16
3.1/8
3.1/4
3.1/4
3.5/16
3.5/16
3.3/8
EDP #
or
e-Code
042315
042316
042317
042318
042319
042320
042321
042322
042323
042324
042325
042326
M41CO
Ɣ Stub drill
Ŷ
Ɣ
d1
Ø
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
1)
d1
dec.
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
l2
Inch
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
l1
Inch
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.5/8
1.5/8
1.5/8
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
EDP #
or
e-Code
041360
041359
041358
041357
041356
041355
041354
041353
041352
041351
041350
041349
041348
041347
041346
041345
041344
041343
041342
041341
041340
041339
041338
041337
041336
041335
041334
041333
041332
041331
1)
1)
1)
1)
1)
1)
1)
1)
d1
Ø
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
15/16
15/16
15/16
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
l1
Inch
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
EDP #
or
e-Code
041330
041329
041328
041327
041326
041325
041324
041323
041322
041321
041320
041319
041318
041317
041316
041315
041314
041313
041312
041311
041310
041309
041308
041307
041306
041305
041304
041303
041302
041301
Not a split point
41
4ASMCO
Ɣ Stub drill
Ŷ
Ɣ
d1
Ø
mm
2.30
2.50
3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
4.00
4.10
4.20
4.70
4.80
4.90
5.00
5.10
42
d1
decimal
Inch
0.0906
0.0984
0.1181
0.1220
0.1260
0.1299
0.1339
0.1378
0.1417
0.1457
0.1575
0.1614
0.1654
0.1850
0.1890
0.1929
0.1969
0.2008
l2
mm
l1
mm
13
14
16
18
18
18
20
20
20
20
22
22
22
24
26
26
26
26
40
43
46
49
49
49
52
52
52
52
55
55
55
58
62
62
62
62
EDP #
or
e-Code
032230
032250
032300
032310
032320
032330
032340
032350
032360
032370
032400
032410
032420
032470
032480
032490
032500
032510
d1
Ø
mm
5.50
5.70
6.00
6.40
6.50
6.80
7.00
8.00
8.50
9.50
9.80
10.00
10.20
10.50
11.00
11.20
11.50
12.00
d1
decimal
Inch
0.2165
0.2244
0.2362
0.2520
0.2559
0.2677
0.2756
0.3150
0.3346
0.3740
0.3858
0.3937
0.4016
0.4134
0.4331
0.4409
0.4528
0.4724
l2
mm
l1
mm
28
28
28
31
31
34
34
37
37
40
43
43
43
43
47
47
47
51
66
66
66
70
70
74
74
79
79
84
89
89
89
89
95
95
95
102
EDP #
or
e-Code
032550
032570
032600
032640
032650
032680
032700
032800
032850
032950
032980
033000
033002
033005
033110
033112
033115
033200
EZ40G
Ɣ Stub drill
Ɣ Parabolic flute
Ɣ Goujure parabolique
Ɣ Canal Parabólico
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
l2
Inch
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
EDP #
or
e-Code
042504
042505
042506
042507
042508
042509
042510
042511
042512
042513
042514
042515
042516
042517
042518
042519
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
EDP #
or
e-Code
042520
042521
042522
042523
042524
042525
042526
042527
042528
042529
042530
042531
042532
43
EZ40P
Ɣ Stub drill
Ɣ Parabolic flute
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
44
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
l2
Inch
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
EDP #
or
e-Code
043604
043605
043606
043607
043608
043609
043610
043611
043612
043613
043614
043615
043616
043617
043618
043619
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
EDP #
or
e-Code
043620
043621
043622
043623
043624
043625
043626
043627
043628
043629
043630
043631
043632
EZ41G - EZ41P
Ɣ Stub drill
Ɣ Parabolic flute
EZ41G
Ŷ
Ɣ
d1
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
d1
dec.
Inch
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
l2
l1
Inch
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
1“
1“
1“
1“
1“
1.1/16
1.1/16
Inch
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
EDP #
or
e-Code
042640
042639
042638
042637
042636
042635
042634
042633
042632
042631
042630
042629
042628
042627
042626
042625
042624
042623
042622
042621
d1
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
l1
Inch
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
Inch
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
EDP #
or
e-Code
042620
042619
042618
042617
042616
042615
042614
042613
042612
042611
042610
042609
042608
042607
042606
042605
042604
042603
042602
042601
EZ41P
Ɣ Stub Drill
EZ41P
Ŷ
d1
40
39
38
37
Ɣ
d1
dec.
Inch
0.0980
0.0995
0.1015
0.1040
l2
l1
Inch
13/16
13/16
13/16
13/16
Inch
1.13/16
1.13/16
1.13/16
1.13/16
EDP #
or
e-Code
043740
043739
043738
043737
d1
36
35
34
33
d1
dec.
Inch
0.1065
0.1100
0.1110
0.1130
l2
l1
Inch
13/16
7/8
7/8
7/8
Inch
1.13/16
1.7/8
1.7/8
1.7/8
EDP #
or
e-Code
043736
043735
043734
043733
45
EZ41P - R40C
EZ41P
d1
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
d1
dec.
Inch
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
l2
Inch
7/8
7/8
15/16
15/16
15/16
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
l1
Inch
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
EDP #
or
e-Code
043732
043731
043730
043729
043728
043727
043726
043725
043724
043723
043722
043721
043720
043719
043718
043717
d1
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
l1
Inch
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
EDP #
or
e-Code
043716
043715
043714
043713
043712
043711
043710
043709
043708
043707
043706
043705
043704
043703
043702
043701
R40C
Ɣ Stub Drill, Type C
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
46
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
EDP #
or
e-Code
040804
040805
040806
040807
040808
040809
040810
040811
040812
040813
040814
040815
040816
040817
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
EDP #
or
e-Code
040818
040819
040820
040821
040822
040823
040824
040825
040826
040827
040828
040829
040830
040831
040832
R41C
Ɣ Stub drill
Ɣ Type C
Ŷ
Ɣ
d1
Ø
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
1)
d1
dec.
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
l2
Inch
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
l1
Inch
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.5/8
1.5/8
1.5/8
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
EDP #
or
e-Code
041860
041859
041858
041857
041856
041855
041854
041853
041852
041851
041850
041849
041848
041847
041846
041845
041844
041843
041842
041841
041840
041839
041838
041837
041836
041835
041834
041833
041832
041831
1)
1)
1)
1)
1)
1)
1)
1)
d1
Ø
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
15/16
15/16
15/16
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
l1
Inch
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
EDP #
or
e-Code
041830
041829
041828
041827
041826
041825
041824
041823
041822
041821
041820
041819
041818
041817
041816
041815
041814
041813
041812
041811
041810
041809
041808
041807
041806
041805
041804
041803
041802
041801
Not a split point
47
R42C
Ɣ Stub drill
Ɣ Type C
Ŷ
Ɣ
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
48
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
1.5/16
1.3/8
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.9/16
1.9/16
1.5/8
l1
Inch
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.11/16
2.11/16
2.11/16
2.11/16
2.3/4
2.3/4
2.13/16
EDP #
or
e-Code
042801
042802
042803
042804
042805
042806
042807
042808
042809
042810
042811
042812
042813
042814
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.13/16
1.7/8
1.7/8
1.15/16
1.15/16
2“
l1
Inch
2.15/16
2.15/16
3“
3“
3.1/16
3.1/16
3.1/8
3.1/4
3.1/4
3.5/16
3.5/16
3.3/8
EDP #
or
e-Code
042815
042816
042817
042818
042819
042820
042821
042822
042823
042824
042825
042826
4ASM
Ɣ Stub drill
Ɣ Type C
Ŷ
Ɣ
d1
Ø
mm
1.00
1.25
1.30
1.65
2.00
2.30
2.40
2.50
3.00
3.10
3.20
3.30
3.40
3.50
3.70
4.00
4.20
4.50
5.00
5.50
5.70
5.80
6.00
6.20
6.40
6.50
6.60
6.80
1)
d1
decimal
Inch
0.0394
0.0492
0.0512
0.0650
0.0787
0.0906
0.0945
0.0984
0.1181
0.1220
0.1260
0.1299
0.1339
0.1378
0.1457
0.1575
0.1654
0.1772
0.1969
0.2165
0.2244
0.2283
0.2362
0.2441
0.2520
0.2559
0.2598
0.2677
l2
mm
l1
mm
6
8
8
11
12
13
14
14
16
18
18
18
20
20
20
22
22
24
26
28
28
28
28
31
31
31
31
34
22
30
30
34
38
40
43
43
46
49
49
49
52
52
52
55
55
58
62
66
66
66
66
70
70
70
70
74
EDP #
or
e-Code
046100
046125
046130
046165
046200
046230
046240
046250
046300
046310
046320
046330
046340
046350
046370
046400
046420
046450
046500
046550
046570
046580
046600
046620
046640
046650
046660
046680
1)
1)
1)
d1
Ø
mm
6.90
7.00
7.20
7.50
8.00
8.10
8.40
8.50
8.70
9.00
9.10
9.20
9.30
9.50
9.70
10.00
10.20
10.50
10.80
11.00
11.20
11.50
11.80
12.00
12.20
12.50
d1
decimal
Inch
0.2717
0.2756
0.2835
0.2953
0.3150
0.3189
0.3307
0.3346
0.3425
0.3543
0.3583
0.3622
0.3661
0.3740
0.3819
0.3937
0.4016
0.4134
0.4252
0.4331
0.4409
0.4528
0.4646
0.4724
0.4803
0.4921
l2
mm
l1
mm
34
34
34
37
37
37
37
37
40
40
40
40
40
40
43
43
43
43
47
47
47
47
47
51
51
51
74
74
74
79
79
79
79
79
84
84
84
84
84
84
89
89
89
89
95
95
95
95
95
102
102
102
EDP #
or
e-Code
046690
046700
046720
046750
046800
046810
046840
046850
046870
046900
046910
046920
046930
046950
046970
047000
047002
047005
047008
047110
047112
047115
047118
047200
047220
047250
Not Split Point
49
R40
Ɣ Stub drill
Note: Sizes 45/64” through 2” are black oxide
Ŷ
Ɣ
d1
Ø
Inch
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
1)
d1
dec.
Inch
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
l2
Inch
1/2
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
2.3/8
2.3/8
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
1.3/8
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
1” Reduced Shank for dia 1.1/16” - 1.1/4”
1.1/4” Reduced Shank for dia 1.5/16” - 1.1/2”
1.1/2” Reduced Shank for dia 1.9/16” - 2”
50
EDP #
or
e-Code
040003
040004
040005
040006
040007
040008
040009
040010
040011
040012
040013
040014
040015
040016
040017
040018
040019
040020
040021
040022
040023
040024
040025
040026
040027
040028
040029
040030
040031
040032
040033
040034
040035
040036
040037
040038
d1
Ø
Inch
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
2“
d1
dec.
Inch
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
0.9531
0.9688
0.9844
1.0000
1.0625
1.1250
1.1875
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
1.6250
1.6875
1.7500
1.8125
1.8750
2.0000
l2
Inch
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
3“
3“
3.1/8
3.1/8
3.1/4
3.1/4
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4“
4“
4.1/4
4.3/8
4.3/8
4.1/2
4.3/4
4.7/8
4.7/8
4.7/8
5.1/8
5.1/8
5.3/8
5.3/8
5.5/8
l1
Inch
4.1/4
4.1/4
4.1/2
4.1/2
4.5/8
4.5/8
4.3/4
4.3/4
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
5.3/8
5.3/8
5.1/2
5.1/2
5.5/8
5.5/8
5.3/4
5.3/4
5.7/8
5.7/8
6“
6“
6.1/4
6.3/8
6.5/8
6.3/4
7“
7.1/8
7.3/8
7.1/2
7.3/4
7.3/4
8“
8“
8.1/4
8.1/4
8.1/2
EDP #
or
e-Code
040039
040040
040041
040042
040043
040044
040545
040546
040547
040548
040549
040550
040551
040552
040553
040554
040555
040556
040557
040558
040559
040560
040561
040562
040563
040600
040604
040608
040612
040616
040620
040624
040628
040632
040636
040640
040644
040648
040652
040656
040700
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
R41
Ɣ Stub drill
Ŷ
Ɣ
d1
Ø
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
d1
dec.
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
l2
Inch
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
7/8
l1
Inch
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.5/8
1.5/8
1.5/8
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
EDP #
or
e-Code
041060
041059
041058
041057
041056
041055
041054
041053
041052
041051
041050
041049
041048
041047
041046
041045
041044
041043
041042
041041
041040
041039
041038
041037
041036
041035
041034
041033
041032
041031
d1
Ø
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
15/16
15/16
15/16
1“
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
1.1/4
1.5/16
1.5/16
l1
Inch
1.15/16
1.15/16
1.15/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/16
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.3/16
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.3/8
2.7/16
2.7/16
EDP #
or
e-Code
041030
041029
041028
041027
041026
041025
041024
041023
041022
041021
041020
041019
041018
041017
041016
041015
041014
041013
041012
041011
041010
041009
041008
041007
041006
041005
041004
041003
041002
041001
51
R42
Ɣ Stub drill
Ɣ
Ŷ
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
52
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
1.5/16
1.3/8
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.9/16
1.9/16
1.5/8
l1
Inch
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.11/16
2.11/16
2.11/16
2.11/16
2.3/4
2.3/4
2.13/16
EDP #
or
e-Code
042001
042002
042003
042004
042005
042006
042007
042008
042009
042010
042011
042012
042013
042014
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.13/16
1.7/8
1.7/8
1.15/16
1.15/16
2“
l1
Inch
2.15/16
2.15/16
3“
3“
3.1/16
3.1/16
3.1/8
3.1/4
3.1/4
3.5/16
3.5/16
3.3/8
EDP #
or
e-Code
042015
042016
042017
042018
042019
042020
042021
042022
042023
042024
042025
042026
L40
Ɣ Stub drill
Ɣ Left hand
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
l2
Inch
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
l1
Inch
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2.1/16
2.1/8
2.3/16
2.1/4
2.3/8
2.7/16
2.1/2
2.5/8
2.11/16
2.3/4
EDP #
or
e-Code
040904
040905
040906
040907
040908
040909
040910
040911
040912
040913
040914
040915
040916
040917
040918
040919
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
2.13/16
2.15/16
3“
3.1/16
3.1/8
3.1/4
3.5/16
3.3/8
3.7/16
3.9/16
3.5/8
3.11/16
3.3/4
EDP #
or
e-Code
040920
040921
040922
040923
040924
040925
040926
040927
040928
040929
040930
040931
040932
53
HSS Jobber Drills
Style:
ProdType
A553
Icon1
Tool Material:
A554
A510
A577
Photo
AMG Chart below.
example:
279 U
279 = SFM
Ŷ
Ɣ
ADX
Icon2
Standard:
Icon3
Direction of Cut:
Icon4
Depth of Cut:
Tool Length:
7
Shank:
Helix:
Point Angle:
Point Style:
Point Type:
HSS Jobber Drills
2
Finish/Coating:
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
54
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
ADX PFX
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
Hardness
HB
1
ADX
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
3
LaunchLoSurface
goDate
58
Cata1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Feet per Minute (SFM)
59
60-61
62-63
Ŷ279L
M11
Ŷ230L
M12
Ŷ197L
M13
Ŷ148H
M14
Ŷ92F
M15
Ŷ49D
M16
M17
M18
Ŷ131G
M21
Ŷ62I
M22
Ɣ89G
M23
Ŷ279L
Ŷ230L
Ŷ197L
Ŷ148H
Ŷ92F
Ŷ49D
Ŷ187M
Ŷ154M
Ŷ131K
Ŷ98H
Ŷ69F
Ɣ36D
Ɣ184J
Ɣ157J
Ŷ131I
Ŷ131I
Ŷ98G
Ŷ85G
Ŷ131G
Ŷ62I
Ɣ89G
Ŷ92G
Ŷ46I
Ɣ62G
Ɣ56E
Ŷ30E
Ɣ36C
M24
Ŷ230K
M31
Ŷ164J
M32
Ŷ148J
M33
Ŷ138F
M34
Ŷ148G
M41
Ɣ98E
M42
Ɣ26C
M43
Ɣ82I
M51
Ɣ49E
M52
Ɣ33G
M53
Ɣ230G
M61
Ŷ279I
M62
Ŷ262I
M63
Ɣ115G
M64
Ɣ230H
M71
Ŷ328M
M72
Ŷ180I
M73
Ŷ180J
M74
Ŷ295G
M81
Ŷ230K
Ŷ164J
Ŷ148J
Ŷ138F
Ŷ148G
Ɣ98E
Ɣ26C
Ɣ82I
Ɣ49E
Ɣ33G
Ɣ230G
Ŷ279I
Ŷ262I
Ɣ115G
Ɣ230H
Ŷ328M
Ŷ180I
Ŷ180J
Ŷ295G
Ŷ138K
Ŷ105J
Ŷ92J
Ŷ82F
Ɣ105G
Ɣ66H
Ɣ13B
Ɣ56I
Ɣ30E
Ɣ20E
Ɣ131D
Ŷ164I
Ŷ148I
Ɣ66F
Ɣ164G
Ŷ164M
Ŷ102I
Ŷ108I
Ŷ213G
Ŷ164G
Ŷ115F
Ŷ174I
Ŷ141I
Ŷ105G
Ŷ79G
Ɣ115G
Ɣ79G
Ɣ33E
Ɣ72I
Ɣ36I
Ɣ33E
M82
M83
M91
M101
Ɣ177I
Ɣ157I
Ŷ157I
HSS Jobber Drills (con‘t)
A907
A141
A012
A002
QC21CO
QC21COM
65
66-67
68-69
70-71
QC21V
QC21G
QC21
QC21P
QC21GM
QC21M
QC21PM
R10CO
R18CO
R15CO
HSS Jobber Drills
PFX
72
73
Ɣ115H
Ɣ98H
Ŷ82G
Ŷ82G
Ŷ62E
Ŷ52E
Ɣ115I
Ɣ98I
Ɣ82G
Ɣ66F
Ɣ43E
Ɣ30D
Ŷ154J
Ŷ131J
Ŷ115F
Ŷ98F
Ɣ59F
Ɣ33E
Ŷ154J
Ŷ131J
Ŷ115F
Ŷ98F
Ɣ59F
Ɣ33E
Ɣ115J
Ɣ98H
Ɣ89G
Ɣ79F
Ŷ56E
Ŷ33D
Ŷ125F
Ŷ75F
Ŷ79H
Ŷ75F
Ɣ59D
Ŷ115F
Ŷ69F
Ŷ75H
Ŷ69F
Ɣ56D
Ŷ98F
Ŷ59F
Ŷ69H
Ŷ59F
Ɣ46D
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ŷ115F
Ŷ69F
Ŷ75H
Ŷ69F
Ɣ56D
Ŷ98F
Ŷ59F
Ŷ69H
Ŷ59F
Ɣ46D
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ɣ115J
Ɣ98H
Ɣ89G
Ɣ79F
Ŷ56E
Ŷ33D
Ɣ49E
Ŷ23E
Ɣ30C
Ɣ49E
Ŷ30G
Ŷ33D
Ɣ66F
Ɣ39G
Ɣ52C
Ɣ66F
Ɣ39G
Ɣ52C
Ɣ72E
Ɣ36G
Ɣ49C
Ɣ115H
Ɣ66F
Ɣ66D
Ɣ105H
Ɣ59F
Ɣ59D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ105H
Ɣ59F
Ɣ59D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ72E
Ɣ36G
Ɣ49C
Ɣ108G
Ɣ89G
Ɣ66E
Ɣ49E
Ŷ72E
Ŷ49E
Ŷ20C
Ŷ46G
Ŷ23G
Ŷ20C
Ɣ213G
Ɣ230G
Ɣ112G
Ɣ98G
Ɣ230E
Ŷ148N
Ɣ131N
Ɣ95G
Ɣ180I
Ɣ131G
Ɣ98H
Ɣ79F
Ɣ66E
Ɣ46E
Ŷ82G
Ŷ52E
Ɣ23B
Ɣ39G
Ɣ23G
Ɣ20E
Ɣ108G
Ɣ115I
Ɣ102H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ131J
Ŷ98E
Ɣ92E
Ɣ85E
Ɣ75F
Ɣ43D
Ɣ23B
Ɣ43G
Ɣ23E
Ɣ10A
Ɣ164G
Ɣ108I
Ɣ128H
Ɣ98G
Ŷ134K
Ŷ125J
Ɣ108I
Ɣ108I
Ŷ98I
Ŷ164H
Ɣ115F
Ɣ10B
Ŷ131J
Ŷ98E
Ɣ92E
Ɣ85E
Ɣ75F
Ɣ43D
Ɣ23B
Ɣ43G
Ɣ23E
Ɣ10A
Ɣ164G
Ɣ108I
Ɣ128H
Ɣ98G
Ŷ134K
Ŷ125J
Ɣ108I
Ɣ108I
Ŷ98I
Ŷ164H
Ɣ115F
Ɣ10B
Ɣ115H
Ɣ92D
Ɣ72E
Ŷ56E
Ŷ92F
Ŷ66D
Ŷ36C
Ɣ49G
Ŷ23E
Ɣ20B
Ɣ125H
Ɣ131F
Ɣ84H
Ɣ69F
Ɣ108J
Ɣ98I
Ɣ98H
Ɣ89F
Ŷ184H
Ŷ98H
Ɣ105F
Ɣ66D
Ŷ171H
Ŷ89H
Ɣ95F
Ɣ59D
Ŷ151H
Ŷ79H
Ɣ85F
Ŷ151H
Ŷ79H
Ɣ79F
Ŷ171H
Ŷ89H
Ɣ95F
Ɣ59D
Ŷ151H
Ŷ79H
Ɣ85F
Ŷ151H
Ŷ79H
Ɣ79F
Ɣ95H
Ɣ49F
Ɣ89H
Ɣ49F
Ɣ95H
Ɣ49F
Ɣ89H
Ɣ49F
Ɣ49F
Ɣ49F
Ɣ59H
Ɣ49F
Ɣ49F
Ɣ115H
Ɣ92D
Ɣ72E
Ŷ56E
Ŷ92F
Ŷ66D
Ŷ36C
Ɣ49G
Ŷ23E
Ɣ20B
Ɣ125H
Ɣ131F
Ɣ89H
Ɣ69F
Ɣ108J
Ɣ98I
Ɣ98H
Ɣ89F
64
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
74
75
76
77
77
Ɣ66H
Ɣ59H
Ŷ112I
Ŷ98H
Ŷ98H
Ŷ98I
Ŷ89H
Ŷ89H
Ɣ89I
Ɣ79H
Ɣ79H
Ŷ98I
Ŷ89H
Ŷ89H
Ɣ89I
Ɣ79H
Ɣ79H
Ŷ440H
Ŷ384H
Ŷ400H
Ŷ351H
Ɣ351H
Ɣ325H
Ŷ400H
Ŷ351H
Ɣ351H
Ɣ325H
Ŷ344H
Ŷ315H
Ɣ276H
Ŷ315H
Ɣ276H
Ɣ20C
78-80
Ɣ20C
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
55
HSS Jobber Drills
Style:
ProdType
2ACO
Icon1
Tool Material:
R88CO
R89CO
EZ10P
EZ18P
HX10
HX18
HX15
Photo
AMG Chart below.
example:
279 U
279 = SFM
2
Finish/Coating:
Icon2
Standard:
Icon3
Direction of Cut:
Icon4
Depth of Cut:
Tool Length:
7
Shank:
Helix:
Point Angle:
Point Style:
Point Type:
HSS Jobber Drills
Ŷ
Ɣ
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
56
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
Hardness
HB
1
Icon5
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
3
LaunchLoSurface
goDate
Cata81
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
M11
Ɣ115J
M12
Ɣ98H
M13
Ɣ89G
M14
Ɣ79F
M15
Ŷ56E
M16
Ŷ33D
M17
M18
M21
Ɣ72E
M22
Ɣ36G
M23
Ɣ49C
M24
M31
Ɣ115H
M32
Ɣ92D
M33
Ɣ72E
M34
Ŷ56E
M41
Ŷ92F
M42
Ŷ66D
M43
Ŷ36C
M51
Ɣ49G
M52
Ŷ23E
M53
Ɣ20B
M61
Ɣ125H
M62
Ɣ131F
M63
Ɣ89H
M64
Ɣ69F
M71
Ɣ108J
M72
Ɣ98I
M73
Ɣ98H
M74
Ɣ89F
M81
M82
M83
M91
Ɣ20C
M101
83
84 85-86
Ɣ115J
Ɣ98H
Ɣ89G
Ɣ79F
Ŷ56E
Ŷ33D
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115H
Ŷ69H
Ŷ75I
Ŷ69H
Ɣ56F
Ɣ72E
Ɣ36G
Ɣ49C
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ105I
Ɣ59H
Ɣ56F
Ɣ115H
Ɣ92D
Ɣ72E
Ŷ56E
Ŷ92F
Ŷ66D
Ŷ36C
Ɣ49G
Ŷ23E
Ɣ20B
Ɣ125H
Ɣ131F
Ɣ89H
Ɣ69F
Ɣ108J
Ɣ98I
Ɣ98H
Ɣ89F
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ171L
Ŷ89I
Ɣ95H
Ɣ59F
Ɣ95H
Ɣ75H
Ɣ20C
Ɣ59H
HSS Jobber Drills (con‘t)
R10A
R18A
R15A
R10
R18
R15
R10P
R18P
R15P
R10H
R18H
R18S
R10S
L10
L18
2AB
2A
94
95
97-99
100
102 103-104 105-106 106-107
R10PM
R08
HSS Jobber Drills
R10B
R18B
R15B
87-88 89-90 91-93
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ɣ115J
Ɣ98H
Ɣ89G
Ɣ79F
Ŷ56E
Ŷ33D
Ɣ115J
Ɣ98H
Ɣ89G
Ɣ79F
Ŷ56E
Ŷ33D
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ɣ72E
Ɣ36G
Ɣ49C
Ɣ72E
Ɣ36G
Ɣ49C
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ115H
Ɣ92D
Ɣ72E
Ŷ56E
Ŷ92F
Ŷ66D
Ŷ36C
Ɣ49G
Ŷ23E
Ɣ20B
Ɣ125H
Ɣ131F
Ɣ89H
Ɣ69F
Ɣ108J
Ɣ98I
Ɣ98H
Ɣ89F
Ɣ115H
Ɣ92D
Ɣ72E
Ŷ56E
Ŷ92F
Ŷ66D
Ŷ36C
Ɣ49G
Ŷ23E
Ɣ20B
Ɣ125H
Ɣ131F
Ɣ89H
Ɣ69F
Ɣ108J
Ɣ98I
Ɣ98H
Ɣ89F
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ɣ20C
Ɣ20C
Ɣ108I
Ɣ92I
Ɣ82F
Ɣ66F
Ŷ115H
Ŷ98H
Ŷ82F
Ŷ66F
Ɣ43E
Ɣ30D
Ɣ49E
Ɣ26G
Ɣ30C
Ɣ82F
Ɣ66D
Ɣ52C
Ɣ33C
Ɣ49C
Ɣ66E
Ɣ49C
Ɣ33B
Ɣ20B
Ɣ23E
Ŷ115H
Ɣ118G
Ŷ148J
Ŷ115J
Ŷ98G
Ŷ95G
Ŷ138J
Ɣ131I
Ɣ66G
Ŷ131I
Ŷ115G
Ɣ49E
Ɣ98I
Ɣ89H
Ɣ79G
Ɣ66E
Ɣ115F
Ɣ66D
Ŷ98H
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ75E
Ɣ39D
Ɣ20B
Ɣ33G
Ɣ20E
Ɣ10A
Ɣ108G
Ɣ115I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
57
A553
Ɣ ADX Drill
Ɣ Foret ADX
Ɣ Broca ADX
Ŷ
Ɣ
d1
Øh8
mm
5.00
5.10
5.20
5.30
5.50
5.60
5.80
5.90
6.00
6.30
6.50
6.60
6.80
6.90
7.00
7.30
7.40
7.50
7.80
7.90
8.00
8.50
8.70
9.00
9.40
9.50
10.00
10.20
10.30
10.50
10.80
11.00
11.30
11.50
58
d1
dec.
Inch
0.1968
0.2007
0.2047
0.2086
0.2165
0.2204
0.2283
0.2322
0.2362
0.2480
0.2559
0.2598
0.2677
0.2716
0.2755
0.2874
0.2913
0.2952
0.3070
0.3110
0.3149
0.3346
0.3425
0.3543
0.3700
0.3740
0.3937
0.4015
0.4055
0.4133
0.4251
0.4330
0.4448
0.4527
l2
mm
36
37
38
38
40
41
42
43
43
46
47
48
48
48
48
53
54
54
56
57
58
75
75
75
75
75
75
87
87
87
94
94
94
94
l1
mm
79
79
79
79
79
79
79
79
79
87
87
87
87
87
87
94
94
94
94
94
94
130
130
130
130
130
130
150
150
150
150
150
150
150
l3
mm
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
40
40
40
40
40
40
45
45
45
45
45
45
45
d2
Øh6
mm
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
12
12
12
12
12
12
12
Stock #
0391204
0391211
0391228
0391235
0391242
0391259
0391266
0391273
0391280
0391297
0391303
0391310
0391327
0391334
0391341
0391358
0391365
0391372
0391389
0391396
0391402
0391419
0391426
0391433
0391440
0391457
0390795
0390801
0390818
0390825
0390832
0390849
0390856
0390863
EDP #
or
e-Code
A5535.0
A5535.1
A5535.2
A5535.3
A5535.5
A5535.6
A5535.8
A5535.9
A5536.0
A5536.3
A5536.5
A5536.6
A5536.8
A5536.9
A5537.0
A5537.3
A5537.4
A5537.5
A5537.8
A5537.9
A5538.0
A5538.5
A5538.7
A5539.0
A5539.4
A5539.5
A55310.0
A55310.2
A55310.3
A55310.5
A55310.8
A55311.0
A55311.3
A55311.5
d1
Øh8
mm
12.00
12.50
13.00
13.10
13.25
13.50
13.75
14.00
14.25
14.50
14.75
15.00
15.10
15.25
15.50
15.75
16.00
16.25
16.50
16.75
17.00
17.25
17.50
17.75
18.00
18.25
18.50
18.75
19.00
19.25
19.50
19.75
20.00
d1
dec.
Inch
0.4724
0.4921
0.5118
0.5157
0.5216
0.5314
0.5413
0.5511
0.5610
0.5708
0.5807
0.5905
0.5944
0.6003
0.6102
0.6200
0.6299
0.6397
0.6496
0.6594
0.6692
0.6791
0.6889
0.6988
0.7086
0.7185
0.7283
0.7381
0.7480
0.7578
0.7677
0.7775
0.7874
l2
mm
94
101
101
101
101
101
101
101
108
108
108
108
108
108
108
108
108
125
125
125
125
130
130
130
130
135
135
135
135
140
140
140
140
l1
mm
150
160
160
160
160
160
160
160
170
170
170
170
170
170
170
170
170
190
190
190
190
190
190
190
190
200
200
200
200
200
200
200
200
l3
mm
45
45
45
45
45
45
45
45
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
50
50
50
50
50
50
50
50
d2
Øh6
mm
12
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
16
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
Stock #
0390870
0390887
0390894
0390900
0390917
0390924
0390931
0390948
0390955
0390962
0390979
0390986
0390993
0391006
0391013
0391020
0391037
0391044
0391051
0391068
0391075
0391082
0391099
0391105
0391112
0391129
0391136
0391143
0391150
0391167
0391174
0391181
0391198
EDP #
or
e-Code
A55312.0
A55312.5
A55313.0
A55313.1
A55313.25
A55313.5
A55313.75
A55314.0
A55314.25
A55314.5
A55314.75
A55315.0
A55315.1
A55315.25
A55315.5
A55315.75
A55316.0
A55316.25
A55316.5
A55316.75
A55317.0
A55317.25
A55317.5
A55317.75
A55318.0
A55318.25
A55318.5
A55318.75
A55319.0
A55319.25
A55319.5
A55319.75
A55320.0
A554
Ɣ ADX Drill
Ɣ Foret ADX
Ɣ Broca ADX
Ŷ
Ɣ
d1
Øh8
mm
5.00
5.10
5.20
5.30
5.50
5.60
5.80
5.90
6.00
6.30
6.50
6.60
6.80
6.90
7.00
7.30
7.40
7.50
7.80
7.90
8.00
8.50
8.70
9.00
9.40
9.50
10.00
10.20
10.30
10.50
10.80
11.00
11.30
11.50
11.80
12.00
12.50
13.00
13.10
13.25
13.50
13.75
14.00
14.25
d1
dec.
Inch
0.1968
0.2007
0.2047
0.2086
0.2165
0.2204
0.2283
0.2322
0.2362
0.2480
0.2559
0.2598
0.2677
0.2716
0.2755
0.2874
0.2913
0.2952
0.3070
0.3110
0.3149
0.3346
0.3425
0.3543
0.3700
0.3740
0.3937
0.4015
0.4055
0.4133
0.4251
0.4330
0.4448
0.4527
0.4646
0.4724
0.4921
0.5118
0.5157
0.5216
0.5314
0.5413
0.5511
0.5610
l2
mm
36
37
38
38
40
41
42
43
43
46
47
48
48
48
48
53
54
54
56
57
58
75
75
75
75
75
75
87
87
87
94
94
94
94
94
94
101
101
101
101
101
101
101
108
l1
mm
79
79
79
79
79
79
79
79
79
87
87
87
87
87
87
94
94
94
94
94
94
130
130
130
130
130
130
150
150
150
150
150
150
150
150
150
160
160
160
160
160
160
160
170
l3
mm
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
48
d2
Øh6
mm
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
14
14
14
14
14
14
14
16
Stock #
0392072
0392089
0392096
0392102
0392119
0392126
0392133
0392140
0392157
0392164
0392171
0392188
0392195
0392201
0392218
0392225
0392232
0392249
0392256
0392263
0392270
0392287
0392294
0392300
0392317
0392324
0391464
0391471
0391488
0391495
0391501
0391518
0391525
0391532
0400234
0391549
0391556
0391563
0391570
0391587
0391594
0391600
0391617
0391624
EDP #
or
e-Code
A5545.0
A5545.1
A5545.2
A5545.3
A5545.5
A5545.6
A5545.8
A5545.9
A5546.0
A5546.3
A5546.5
A5546.6
A5546.8
A5546.9
A5547.0
A5547.3
A5547.4
A5547.5
A5547.8
A5547.9
A5548.0
A5548.5
A5548.7
A5549.0
A5549.4
A5549.5
A55410.0
A55410.2
A55410.3
A55410.5
A55410.8
A55411.0
A55411.3
A55411.5
A55411.8
A55412.0
A55412.5
A55413.0
A55413.1
A55413.25
A55413.5
A55413.75
A55414.0
A55414.25
d1
Øh8
mm
14.50
14.75
15.00
15.10
15.25
15.50
15.75
16.00
16.25
16.50
16.75
17.00
17.25
17.50
17.75
18.00
18.25
18.50
18.75
19.00
19.25
19.50
19.75
20.00
20.50
20.75
21.00
21.50
22.00
22.25
22.50
23.00
23.25
23.50
24.00
24.50
25.00
26.00
26.50
27.00
28.00
29.00
29.50
30.00
d1
dec.
Inch
0.5708
0.5807
0.5905
0.5944
0.6003
0.6102
0.6200
0.6299
0.6397
0.6496
0.6594
0.6692
0.6791
0.6889
0.6988
0.7086
0.7185
0.7283
0.7381
0.7480
0.7578
0.7677
0.7775
0.7874
0.8070
0.8169
0.8267
0.8464
0.8661
0.8759
0.8858
0.9055
0.9153
0.9251
0.9448
0.9645
0.9842
1.0236
1.0433
1.0629
1.1023
1.1417
1.1614
1.1811
l2
mm
108
108
108
108
108
108
108
108
125
125
125
125
130
130
130
130
135
135
135
135
140
140
140
140
141
141
141
148
148
155
155
155
162
162
162
168
168
175
182
182
189
195
202
202
l1
mm
170
170
170
170
170
170
170
170
190
190
190
190
190
190
190
190
200
200
200
200
200
200
200
200
219
219
219
226
226
233
233
233
240
240
240
240
246
257
264
264
271
277
284
284
l3
mm
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
50
50
50
50
50
50
50
50
56
56
56
56
56
56
56
56
56
56
56
56
56
60
60
60
60
60
60
60
d2
Øh6
mm
16
16
16
16
16
16
16
16
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
Stock #
0391631
0391648
0391655
0391662
0391679
0391686
0391693
0391709
0391716
0391723
0391730
0391747
0391754
0391761
0391778
0391785
0391792
0391808
0391815
0391822
0391839
0391846
0391853
0391860
0391877
0391884
0391891
0391907
0391914
0391921
0391938
0391945
0391952
0391969
0391976
0391983
0391990
0392003
0392010
0392027
0392034
0392041
0392058
0392065
EDP #
or
e-Code
A55414.5
A55414.75
A55415.0
A55415.1
A55415.25
A55415.5
A55415.75
A55416.0
A55416.25
A55416.5
A55416.75
A55417.0
A55417.25
A55417.5
A55417.75
A55418.0
A55418.25
A55418.5
A55418.75
A55419.0
A55419.25
A55419.5
A55419.75
A55420.0
A55420.5
A55420.75
A55421.0
A55421.5
A55422.0
A55422.25
A55422.5
A55423.0
A55423.25
A55423.5
A55424.0
A55424.5
A55425.0
A55426.0
A55426.5
A55427.0
A55428.0
A55429.0
A55429.5
A55430.0
59
A510
Ɣ ADX Jobber Drill
Ɣ Broca ADX , serie corta
Ɣ Foret court ADX
Ŷ
Ɣ
d1
Øh8
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
60
d1
Øh8
mm
3.00
3.10
3.18
3.20
3.30
3.40
3.50
3.57
3.60
3.70
3.80
3.90
3.97
4.00
4.10
4.20
4.30
4.37
4.40
4.50
4.60
4.70
4.76
4.80
4.90
5.00
5.10
5.16
5.20
5.30
5.40
5.50
5.56
5.60
d1
dec.
Inch
0.1181
0.1220
0.1250
0.1259
0.1299
0.1338
0.1377
0.1405
0.1417
0.1456
0.1496
0.1535
0.1562
0.1574
0.1614
0.1653
0.1692
0.1720
0.1732
0.1771
0.1811
0.1850
0.1874
0.1889
0.1929
0.1968
0.2007
0.2031
0.2047
0.2086
0.2125
0.2165
0.2188
0.2204
l2
mm
33
36
36
36
36
39
39
39
39
39
43
43
43
43
43
43
47
47
47
47
47
47
52
52
52
52
52
52
52
52
57
57
57
57
l1
mm
61
65
65
65
65
70
70
70
70
70
75
75
75
75
75
75
80
80
80
80
80
80
86
86
86
86
86
86
86
86
93
93
93
93
Stock #
0036495
0036501
0168974
0036518
0036525
0036532
0036549
0168981
0036556
0036563
0036570
0036587
0168998
0036594
0036600
0036617
0036624
0169001
0036631
0036648
0036655
0036662
0169018
0036679
0036686
0036693
0036709
0169025
0036716
0036723
0036730
0036747
0169032
0036754
EDP #
or
e-Code
A5103.0
A5103.1
A5101/8
A5103.2
A5103.3
A5103.4
A5103.5
A5109/64
A5103.6
A5103.7
A5103.8
A5103.9
A5105/32
A5104.0
A5104.1
A5104.2
A5104.3
A51011/64
A5104.4
A5104.5
A5104.6
A5104.7
A5103/16
A5104.8
A5104.9
A5105.0
A5105.1
A51013/64
A5105.2
A5105.3
A5105.4
A5105.5
A5107/32
A5105.6
d1
Øh8
Inch
15/64
1/4
17/64
9/32
19/64
5/16
21/64
d1
Øh8
mm
5.70
5.80
5.90
5.95
6.00
6.10
6.20
6.30
6.35
6.40
6.50
6.60
6.70
6.75
6.80
6.90
7.00
7.10
7.14
7.20
7.30
7.40
7.50
7.54
7.60
7.70
7.80
7.90
7.94
8.00
8.10
8.20
8.30
8.33
8.40
8.50
8.60
8.70
d1
dec.
Inch
0.2244
0.2283
0.2322
0.2342
0.2362
0.2401
0.2440
0.2480
0.2500
0.2519
0.2559
0.2598
0.2637
0.2657
0.2677
0.2716
0.2755
0.2795
0.2811
0.2834
0.2874
0.2913
0.2952
0.2968
0.2992
0.3031
0.3070
0.3110
0.3125
0.3149
0.3188
0.3228
0.3267
0.3279
0.3307
0.3346
0.3385
0.3425
l2
mm
57
57
57
57
57
63
63
63
63
63
63
63
63
69
69
69
69
69
69
69
69
69
69
75
75
75
75
75
75
75
75
75
75
75
75
75
81
81
l1
mm
93
93
93
93
93
101
101
101
101
101
101
101
101
109
109
109
109
109
109
109
109
109
109
117
117
117
117
117
117
117
117
117
117
117
117
117
125
125
Stock #
0036761
0036778
0036785
0169049
0036792
0036808
0036815
0036822
0169056
0036839
0036846
0036853
0036860
0169063
0036877
0036884
0036891
0036907
0169070
0036914
0036921
0036938
0036945
0169087
0036952
0036969
0036976
0036983
0169094
0036990
0037003
0037010
0037027
0169100
0037034
0037041
0037058
0037065
EDP #
or
e-Code
A5105.7
A5105.8
A5105.9
A51015/64
A5106.0
A5106.1
A5106.2
A5106.3
A5101/4
A5106.4
A5106.5
A5106.6
A5106.7
A51017/64
A5106.8
A5106.9
A5107.0
A5107.1
A5109/32
A5107.2
A5107.3
A5107.4
A5107.5
A51019/64
A5107.6
A5107.7
A5107.8
A5107.9
A5105/16
A5108.0
A5108.1
A5108.2
A5108.3
A51021/64
A5108.4
A5108.5
A5108.6
A5108.7
A510
Ɣ ADX Jobber Drill
d1
Øh8
Inch
11/32
23/64
3/8
25/64
13/32
27/64
d1
Øh8
mm
8.73
8.80
8.90
9.00
9.10
9.13
9.20
9.30
9.40
9.50
9.53
9.60
9.70
9.80
9.90
9.92
10.00
10.10
10.20
10.30
10.32
10.40
10.50
10.60
10.70
10.72
10.80
10.90
d1
dec.
Inch
0.3437
0.3464
0.3503
0.3543
0.3582
0.3594
0.3622
0.3661
0.3700
0.3740
0.3750
0.3779
0.3818
0.3858
0.3897
0.3905
0.3937
0.3976
0.4015
0.4055
0.4062
0.4094
0.4133
0.4173
0.4212
0.4220
0.4251
0.4291
Ɣ Foret court ADX
1
l2
mm
81
81
81
81
81
81
81
81
81
81
87
87
87
87
87
87
87
87
87
87
87
87
87
87
94
94
94
94
l
mm
125
125
125
125
125
125
125
125
125
125
133
133
133
133
133
133
133
133
133
133
133
133
133
133
142
142
142
142
Stock #
0169117
0037072
0037089
0037096
0037102
0169124
0037119
0037126
0037133
0037140
0169131
0037157
0037164
0037171
0037188
0169148
0036174
0036181
0036198
0036204
0169155
0036211
0036228
0036235
0036242
0169162
0036259
0036266
EDP #
or
e-Code
A51011/32
A5108.8
A5108.9
A5109.0
A5109.1
A51023/64
A5109.2
A5109.3
A5109.4
A5109.5
A5103/8
A5109.6
A5109.7
A5109.8
A5109.9
A51025/64
A51010.0
A51010.1
A51010.2
A51010.3
A51013/32
A51010.4
A51010.5
A51010.6
A51010.7
A51027/64
A51010.8
A51010.9
d1
Øh8
Inch
7/16
29/64
15/32
31/64
1/2
Ɣ Broca ADX , serie corta
d1
Øh8
mm
11.00
11.10
11.11
11.20
11.30
11.40
11.50
11.51
11.60
11.70
11.80
11.90
11.91
12.00
12.10
12.20
12.30
12.30
12.40
12.50
12.60
12.70
12.70
12.80
12.90
13.00
14.00
d1
dec.
Inch
0.4330
0.4370
0.4374
0.4409
0.4448
0.4488
0.4527
0.4531
0.4566
0.4606
0.4645
0.4685
0.4688
0.4724
0.4763
0.4803
0.4842
0.4842
0.4881
0.4921
0.4960
0.5000
0.5000
0.5039
0.5078
0.5118
0.5511
1
l2
mm
94
94
94
94
94
94
94
94
94
94
94
101
101
101
101
101
101
101
101
101
101
101
101
101
101
101
108
l
mm
142
142
142
142
142
142
142
142
142
142
142
151
151
151
151
151
151
151
151
151
151
151
151
151
151
151
160
Stock #
0036273
0036280
0169179
0036297
0036303
0036310
0036327
0169186
0036334
0036341
0036358
0036365
0169193
0036372
0036389
0036396
0036402
0169209
0036419
0036426
0036433
0036440
0169216
0036457
0036464
0036471
0036488
EDP #
or
e-Code
A51011.0
A51011.1
A5107/16
A51011.2
A51011.3
A51011.4
A51011.5
A51029/64
A51011.6
A51011.7
A51011.8
A51011.9
A51015/32
A51012.0
A51012.1
A51012.2
A51012.3
A51031/64
A51012.4
A51012.5
A51012.6
A51012.7
A5101/2
A51012.8
A51012.9
A51013.0
A51014.0
61
A577
Ɣ PFX Jobber Drill
Ɣ Foret PFX court
Ɣ Broca PFX Serie Corta
Ŷ
Ɣ
d1
Øh8
mm
1.50
2.00
2.50
2.60
3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
3.80
3.90
4.00
4.10
4.20
4.30
4.40
4.50
4.60
4.70
4.80
4.90
5.00
5.10
5.20
5.30
5.40
5.50
62
d1
dec.
Inch
0.0590
0.0787
0.0984
0.1023
0.1181
0.1220
0.1259
0.1299
0.1338
0.1377
0.1417
0.1456
0.1496
0.1535
0.1574
0.1614
0.1653
0.1692
0.1732
0.1771
0.1811
0.1850
0.1889
0.1929
0.1968
0.2007
0.2047
0.2086
0.2125
0.2165
l2
mm
18
24
30
30
33
36
36
36
39
39
39
39
43
43
43
43
43
47
47
47
47
47
52
52
52
52
52
52
57
57
l1
mm
40
49
57
57
61
65
65
65
70
70
70
70
75
75
75
75
75
80
80
80
80
80
86
86
86
86
86
86
93
93
Stock #
0279502
0279519
0125205
0125199
0125212
0586471
0586488
0125229
0125236
0125243
0586495
0586501
0586518
0586525
0125250
0125267
0125274
0125281
0586532
0125298
0586549
0586556
0279526
0125304
0125311
0125328
0279533
0586563
0586570
0125335
EDP #
or
e-Code
A5771.5
A5772.0
A5772.5
A5772.6
A5773.0
A5773.1
A5773.2
A5773.3
A5773.4
A5773.5
A5773.6
A5773.7
A5773.8
A5773.9
A5774.0
A5774.1
A5774.2
A5774.3
A5774.4
A5774.5
A5774.6
A5774.7
A5774.8
A5774.9
A5775.0
A5775.1
A5775.2
A5775.3
A5775.4
A5775.5
d1
Øh8
mm
5.60
5.70
5.80
5.90
6.00
6.10
6.20
6.30
6.40
6.50
6.60
6.70
6.80
6.90
7.00
7.10
7.20
7.30
7.40
7.50
7.60
7.70
7.80
7.90
8.00
8.10
8.20
8.30
8.40
8.50
d1
dec.
Inch
0.2204
0.2244
0.2283
0.2322
0.2362
0.2401
0.2440
0.2480
0.2519
0.2559
0.2598
0.2637
0.2677
0.2716
0.2755
0.2795
0.2834
0.2874
0.2913
0.2952
0.2992
0.3031
0.3070
0.3110
0.3149
0.3188
0.3228
0.3267
0.3307
0.3346
l2
mm
57
57
57
57
57
63
63
63
63
63
63
63
69
69
69
69
69
69
69
69
75
75
75
75
75
75
75
75
75
75
l1
mm
93
93
93
93
93
101
101
101
101
101
101
101
109
109
109
109
109
109
109
109
117
117
117
117
117
117
117
117
117
117
Stock #
0586587
0279540
0586594
0586600
0125342
0279557
0586617
0586624
0586631
0125359
0586648
0586655
0125366
0125373
0125380
0586662
0586679
0586686
0586693
0125397
0586709
0586716
0586723
0586730
0125403
0586747
0586754
0279564
0586761
0125410
EDP #
or
e-Code
A5775.6
A5775.7
A5775.8
A5775.9
A5776.0
A5776.1
A5776.2
A5776.3
A5776.4
A5776.5
A5776.6
A5776.7
A5776.8
A5776.9
A5777.0
A5777.1
A5777.2
A5777.3
A5777.4
A5777.5
A5777.6
A5777.7
A5777.8
A5777.9
A5778.0
A5778.1
A5778.2
A5778.3
A5778.4
A5778.5
A577
Ɣ PFX Jobber Drill
d1
Øh8
mm
8.60
8.70
8.80
8.90
9.00
9.10
9.20
9.30
9.40
9.50
9.60
9.70
9.80
9.90
10.00
10.20
10.30
10.40
1)
d1
dec.
Inch
0.3385
0.3425
0.3464
0.3503
0.3543
0.3582
0.3622
0.3661
0.3700
0.3740
0.3779
0.3818
0.3858
0.3897
0.3937
0.4015
0.4055
0.4094
Ɣ Foret PFX court
l2
mm
81
81
81
81
81
81
81
81
81
81
87
87
87
87
87
87
87
87
l1
mm
125
125
125
125
125
125
125
125
125
125
133
133
133
133
133
133
133
133
Stock #
0125427
0125434
0586778
0586785
0125441
0586792
0586808
0586815
0586822
0125458
0586839
0586846
0586853
0586860
0125106
0125113
0125120
0125137
EDP #
or
e-Code
A5778.6
A5778.7
A5778.8
A5778.9
A5779.0
A5779.1
A5779.2
A5779.3
A5779.4
A5779.5
A5779.6
A5779.7
A5779.8
A5779.9
A57710.0
A57710.2
A57710.3
A57710.4
d1
Øh8
mm
10.50
10.80
11.00
11.20
11.50
11.80
12.00
12.20
12.50
12.80
13.00
13.50
14.00
14.50
15.00
15.50
16.00
d1
dec.
Inch
0.4133
0.4251
0.4330
0.4409
0.4527
0.4645
0.4724
0.4803
0.4921
0.5039
0.5118
0.5314
0.5511
0.5708
0.5905
0.6102
0.6299
l2
mm
87
914
97
97
97
97
106
106
106
106
106
115
115
121
121
130
130
l1
mm
133
142
142
142
142
142
151
151
151
151
151
160
160
169
169
178
178
Stock #
0125144
0586372
0125151
0586389
0125168
0586396
0125175
0125182
0586402
0586419
0139615
0586426
0139622
0586433
0586440
0586457
0586464
EDP #
or
e-Code
A57710.5
A57710.8
A57711.0
A57711.2
A57711.5
A57711.8
A57712.0
A57712.2
A57712.5
A57712.8
A57713.0
A57713.5
A57714.0
A57714.5
A57715.0
A57715.5
A57716.0
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
Flute lengths longer than standard
63
A907
Ɣ PFX Jobber Drill
Ɣ Foret PFX court
Ŷ
Ɣ
d1
Øh8
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
64
d1
Øh8
mm
d1
dec.
Inch
l2
mm
l1
mm
Stock #
EDP #
or
e-Code
1.00
1.10
1.20
1.30
1.40
1.50
1.59
1.60
1.70
1.80
1.90
1.98
2.00
2.10
2.20
2.30
2.38
2.40
2.50
2.60
2.70
2.78
2.80
2.90
3.00
3.10
3.18
3.20
3.30
3.40
3.50
3.57
3.60
3.70
3.80
3.90
3.97
4.00
4.10
4.20
4.30
4.37
4.40
4.50
4.60
4.70
0.0393
0.0433
0.0472
0.0511
0.0551
0.0590
0.0625
0.0629
0.0669
0.0708
0.0748
0.0779
0.0787
0.0826
0.0866
0.0905
0.0937
0.0944
0.0984
0.1023
0.1062
0.1094
0.1102
0.1141
0.1181
0.1220
0.1251
0.1259
0.1299
0.1338
0.1377
0.1405
0.1417
0.1456
0.1496
0.1535
0.1562
0.1574
0.1614
0.1653
0.1692
0.1720
0.1732
0.1771
0.1811
0.1850
12
14
16
16
18
18
20
20
20
22
22
24
24
24
27
27
30
30
30
30
33
33
33
33
33
36
36
36
36
39
39
39
39
39
43
43
43
43
43
43
47
47
47
47
47
47
34
36
38
38
40
40
43
43
43
46
46
49
49
49
53
53
57
57
57
57
61
61
61
61
61
65
65
65
65
70
70
70
70
70
75
75
75
75
75
75
80
80
80
80
80
80
0144831
0144848
0144855
0144862
0144879
0144886
0170830
0144893
0144909
0144916
0144923
0170847
0144930
0144947
0144954
0144961
0170854
0144978
0144985
0144992
0145005
0170861
0145012
0145029
0145036
0145043
0170878
0145050
0145067
0145074
0145081
0170885
0145098
0145104
0145111
0145128
0170892
0145135
0145142
0145159
0145166
0170908
0145173
0145180
0145197
0145203
A9071.0
A9071.1
A9071.2
A9071.3
A9071.4
A9071.5
A9071/16
A9071.6
A9071.7
A9071.8
A9071.9
A9075/64
A9072.0
A9072.1
A9072.2
A9072.3
A9073/32
A9072.4
A9072.5
A9072.6
A9072.7
A9077/64
A9072.8
A9072.9
A9073.0
A9073.1
A9071/8
A9073.2
A9073.3
A9073.4
A9073.5
A9079/64
A9073.6
A9073.7
A9073.8
A9073.9
A9075/32
A9074.0
A9074.1
A9074.2
A9074.3
A90711/64
A9074.4
A9074.5
A9074.6
A9074.7
4.76
4.80
0.1874
0.1889
52
52
86
86
0170915
0145210
A9073/16
A9074.8
d1
Øh8
Inch
N7
13/64
7/32
15/64
1/4
F
17/64
I
9/32
19/64
5/16
21/64
d1
Øh8
mm
d1
dec.
Inch
l2
mm
l1
mm
Stock #
EDP #
or
e-Code
4.90
5.00
5.10
5.11
5.16
5.20
5.30
5.40
5.50
5.56
5.60
5.70
5.80
5.90
5.95
6.00
6.10
6.20
6.30
6.35
6.40
6.50
6.53
6.60
0.1929
0.1968
0.2007
0.2010
0.2031
0.2047
0.2086
0.2125
0.2165
0.2188
0.2204
0.2244
0.2283
0.2322
0.2342
0.2362
0.2401
0.2440
0.2480
0.2500
0.2519
0.2559
0.2570
0.2598
52
52
52
52
52
52
52
57
57
57
57
57
57
57
57
57
63
63
63
63
63
63
63
63
86
86
86
86
86
86
86
93
93
93
93
93
93
93
93
93
101
101
101
101
101
101
101
101
0145227
0145234
0145241
0588116
0170922
0145258
0145265
0145272
0145289
0170939
0145296
0145302
0145319
0145326
0170946
0145333
0145340
0145357
0145364
0170953
0145371
0145388
0588093
0145395
A9074.9
A9075.0
A9075.1
A907N7
A90713/64
A9075.2
A9075.3
A9075.4
A9075.5
A9077/32
A9075.6
A9075.7
A9075.8
A9075.9
A90715/64
A9076.0
A9076.1
A9076.2
A9076.3
A9071/4
A9076.4
A9076.5
A907F
A9076.6
6.70
6.75
6.80
6.90
6.91
0.2637
0.2657
0.2677
0.2716
0.2720
63
69
69
69
69
101
109
109
109
109
0145401
0170960
0145418
0145425
0588109
A9076.7
A90717/64
A9076.8
A9076.9
A907I
7.00
0.2755
69
109
0145432
A9077.0
7.10
0.2795
69
109
0145449
A9077.1
7.14
0.2811
69
109
0170977
A9079/32
7.20
0.2834
69
109
0145456
A9077.2
7.30
0.2874
69
109
0145463
A9077.3
7.40
0.2913
69
109
0145470
A9077.4
7.50
7.54
7.60
7.70
7.80
7.90
7.94
8.00
8.10
0.2952
0.2968
0.2992
0.3031
0.3070
0.3110
0.3125
0.3149
0.3188
69
75
75
75
75
75
75
75
75
109 0145487
117 0170984
117 0145494
117 0145500
117 0145517
117 0145524
117 0170991
117 0145531
117 0145548
8.20
8.30
8.33
8.40
0.3228
0.3267
0.3279
0.3307
75
75
75
75
117
117
117
117
0145555
0145562
0171004
0145579
A9077.5
A90719/64
A9077.6
A9077.7
A9077.8
A9077.9
A9075/16
A9078.0
A9078.1
A9078.2
A9078.3
A90721/64
A9078.4
A907 - A141
d1
Øh8
Inch
Q
d1
Øh8
mm
8.43
8.50
8.60
R
8.61
8.70
11/32 8.73
8.80
8.90
9.00
9.10
23/64 9.13
9.20
9.30
9.40
9.50
3/8
9.53
9.60
9.70
d1
dec.
Inch
0.3320
0.3346
0.3385
0.3390
0.3425
0.3437
0.3464
0.3503
0.3543
0.3582
0.3594
0.3622
0.3661
0.3700
0.3740
0.3751
0.3779
0.3818
l2
mm
75
75
81
75
81
81
81
81
81
81
81
81
81
81
81
87
87
87
l1
mm
117
117
125
117
125
125
125
125
125
125
125
125
125
125
125
133
133
133
Stock #
0588123
0145586
0145593
0588130
0145609
0171011
0145616
0145623
0145630
0145647
0171028
0145654
0145661
0145678
0145685
0171035
0145692
0145708
EDP #
or
e-Code
A907Q
A9078.5
A9078.6
A907R
A9078.7
A90711/32
A9078.8
A9078.9
A9079.0
A9079.1
A90723/64
A9079.2
A9079.3
A9079.4
A9079.5
A9073/8
A9079.6
A9079.7
9.80
9.90
25/64 9.92
10.00
0.3858
0.3897
0.3905
0.3937
87
87
87
87
133
133
133
133
0145715
0145722
0171042
0145739
A9079.8
A9079.9
A90725/64
A90710.0
10.20
10.30
13/32 10.32
10.40
10.50
0.4015
0.4055
0.4062
0.4094
0.4133
87
87
87
87
87
133
133
133
133
133
0145746
0145753
0171059
0145760
0145777
A90710.2
A90710.3
A90713/32
A90710.4
A90710.5
d1
d1
Øh8
Øh8
Inch mm
27/64 10.72
10.80
11.00
7/16 11.11
11.20
11.50
29/64 11.51
11.80
15/32 11.91
12.00
12.20
31/64 12.30
12.50
1/2
12.70
12.80
13.00
13.50
14.00
14.50
15.00
15.50
16.00
17.00
17.50
18.00
19.00
d1
dec.
Inch
0.4220
0.4251
0.4330
0.4374
0.4409
0.4527
0.4531
0.4645
0.4688
0.4724
0.4803
0.4842
0.4921
0.5000
0.5039
0.5118
0.5314
0.5511
0.5708
0.5905
0.6102
0.6299
0.6693
0.6890
0.7087
0.7480
20.00 0.7874
l2
mm
97
97
97
97
97
97
97
97
106
106
106
106
106
106
106
106
115
115
121
121
130
130
125
130
130
135
EDP #
l1
or
mm Stock #
e-Code
142 0171066 A90727/64
142 0145784 A90710.8
142 0145791 A90711.0
142 0171073 A9077/16
142 0145807 A90711.2
142 0145814 A90711.5
142 0171080 A90729/64
142 0145821 A90711.8
151 0171097 A90715/32
151 0145838 A90712.0
151 0145845 A90712.2
151 0171103 A90731/64
151 0145852 A90712.5
151 0171110 A9071/2
151 0145869 A90712.8
151 0145876 A90713.0
160 0302897 A90713.5
160 0213896 A90714.0
169 0302903 A90714.5
169 0302910 A90715.0
178 0302927 A90715.5
178 0302934 A90716.0
184 0588147 A90717.0
191 0588154 A90717.5
198 0588161 A90718.0
205 0588178 A90719.0
140 215 0588185 A90720.0
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)2)
1)2)
1)2)
1)
Flute Lengths Longer than Standard 1) Gounjures plus longues que le standard 1) Longitudes del canal superiores a la standard
2)
Overall Lengths Longer than Standard 2) Longueur totale plus longue que le standard 2) Longitudes totales superiores a la standard
Ɣ Jobber Drill
Ɣ Fast spiral for stainless steel
Ɣ Foret court
A141
Ŷ
Ɣ
d1Ø
Inch
d1Ø
mm
d1dec.
Inch
l2
Inch
l1
Inch
EDP #
Stock # or e-Code
d1Ø
Inch
d1Ø
mm
d1dec.
Inch
l2
Inch
l1
Inch
EDP #
Stock # or e-Code
1/16
1.588
0.0625
25/32
1.11/16
0423264 A1411/16
5/64
1.984
0.0781
15/16
1.15/16
0423486 A1415/64
3/32
2.381
0.0938
1.3/16
2.1/4
0423431 A1413/32
7/64
2.778
0.1094
1.5/16
2.13/32
0423516 A1417/64
1/8
3.175
0.1250
1.7/16
2.9/16
0423295 A1411/8
9/64
3.572
0.1406
1.17/32
2.3/4
0423530 A1419/64
5/32
3.969
0.1562
1.11/16
2.15/16
0423479 A1415/32
11/64
4.366
0.1719
1.27/32
3.5/32
0423318 A14111/64
3/16
4.763
0.1875
2.1/16
3.3/8
0423424 A1413/16
13/64 5.159
0.2031
2.1/16
3.3/8
0423332 A14113/64
7/32
5.556
0.2188
2.1/4
3.21/32
0423509 A1417/32
15/64 5.953
0.2344
2.1/4
3.21/32
0423547 A14115/64
1/4
6.350
0.2500
2.1/2
3.31/32
0423288 A1411/4
17/64 6.747
0.2656
2.23/32
4.9/32
0423356 A14117/64
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
7.541
7.938
8.334
8.731
9.128
9.525
9.922
10.319
10.716
11.113
11.509
11.906
12.303
12.700
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
2.15/16
2.15/16
2.15/16
3.3/16
3.3/16
3.7/16
3.7/16
3.7/16
3.11/16
3.11/16
3.11/16
3.31/32
3.31/32
3.31/32
4.19/32
4.19/32
4.19/32
4.29/32
4.29/32
5.1/4
5.1/4
5.1/4
5.19/32
5.19/32
5.19/32
5.15/16
5.15/16
5.15/16
0423363
0423462
0423370
0423301
0423387
0423448
0423394
0423325
0423400
0423493
0423417
0423349
0423455
0423271
9/32
0.2812
2.23/32
4.9/32
0423523 A1419/32
7.144
A14119/64
A1415/16
A14121/64
A14111/32
A14123/64
A1413/8
A14125/64
A14113/32
A14127/64
A1417/16
A14129/64
A14115/32
A14131/64
A1411/2
65
A012
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
80
79
1/64
78
77
76
75
74
73
72
71
70
69
68
1/32
67
66
65
64
63
62
61
60
59
58
57
56
3/64
55
54
53
1/16
52
51
d1
Ø
mm
0.343
0.368
0.397
0.406
0.457
0.508
0.533
0.572
0.610
0.635
0.660
0.711
0.742
0.787
0.794
0.813
0.838
0.889
0.914
0.940
0.965
0.991
1.016
1.041
1.067
1.092
1.181
1.191
1.321
1.397
1.511
1.588
1.613
1.702
d1
dec.
Inch
0.0135
0.0145
0.0156
0.0160
0.0180
0.0200
0.0210
0.0225
0.0240
0.0250
0.0260
0.0280
0.0292
0.0310
0.0312
0.0320
0.0330
0.0350
0.0360
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0469
0.0520
0.0550
0.0595
0.0625
0.0635
0.0670
l2
Inch
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
1“
l1
Inch
3/4
3/4
3/4
7/8
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
2“
Stock #
0574256
0574249
0573952
0574232
0574225
0574218
0574201
0574195
0574188
0574171
0574164
0574157
0574140
0574133
0573969
0574126
0574119
0574102
0574096
0574089
0574072
0574065
0574058
0574041
0574034
0574027
0574010
0573976
0574003
0573990
0573983
0578636
0578704
0578698
EDP #
or
e-Code
A012N80
A012N79
A0121/64
A012N78
A012N77
A012N76
A012N75
A012N74
A012N73
A012N72
A012N71
A012N70
A012N69
A012N68
A0121/32
A012N67
A012N66
A012N65
A012N64
A012N63
A012N62
A012N61
A012N60
A012N59
A012N58
A012N57
A012N56
A0123/64
A012N55
A012N54
A012N53
A0121/16
A012N52
A012N51
d1
Ø
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
d1
Ø
mm
1.778
1.854
1.930
1.984
1.994
2.057
2.083
2.184
2.261
2.375
2.381
2.438
2.489
2.527
2.578
2.642
2.705
2.778
2.794
2.819
2.870
2.946
3.048
3.175
3.264
3.454
3.569
3.572
3.658
3.734
3.797
3.861
3.912
3.969
d1
dec.
Inch
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
l2
Inch
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
l1
Inch
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
Stock #
0578681
0578674
0578667
0578643
0578650
0571705
0571699
0571682
0571675
0571668
0572061
0571651
0571644
0571620
0571613
0571606
0571590
0572184
0571583
0571576
0571569
0571552
0571545
0571897
0571538
0571514
0571507
0572214
0571491
0571484
0571477
0571460
0571453
0572146
EDP #
or
e-Code
A012N50
A012N49
A012N48
A0125/64
A012N47
A012N46
A012N45
A012N44
A012N43
A012N42
A0123/32
A012N41
A012N40
A012N39
A012N38
A012N37
A012N36
A0127/64
A012N35
A012N34
A012N33
A012N32
A012N31
A0121/8
A012N30
A012N29
A012N28
A0129/64
A012N27
A012N26
A012N25
A012N24
A012N23
A0125/32
Bright finish below 2.0 mm, TiN Tipped 2.0 mm and above
No split point below 2.00 mm
66
A012
d1
Ø
22
21
20
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
A
15/64
B
C
D
1/4
E
F
G
17/64
H
I
J
K
9/32
L
M
19/64
d1
Ø
mm
3.988
4.039
4.089
4.216
4.305
4.366
4.394
4.496
4.572
4.623
4.700
4.762
4.800
4.851
4.915
4.978
5.055
5.105
5.159
5.182
5.220
5.309
5.410
5.556
5.613
5.791
5.944
5.953
6.045
6.147
6.248
6.350
6.350
6.528
6.629
6.747
6.756
6.909
7.036
7.137
7.144
7.366
7.493
7.541
d1
dec.
Inch
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2340
0.2344
0.2380
0.2420
0.2460
0.2500
0.2500
0.2570
0.2610
0.2656
0.2660
0.2720
0.2770
0.2810
0.2812
0.2900
0.2950
0.2969
l2
Inch
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
2.15/16
3.1/16
3.1/16
l1
Inch
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
3.7/8
4“
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.1/4
4.3/8
4.3/8
Stock #
0571446
0571439
0571422
0571408
0571392
0571910
0571385
0571378
0571361
0571354
0571347
0572054
0571330
0571323
0571316
0571750
0571743
0571736
0571934
0571729
0571712
0571637
0571521
0572177
0571415
0571309
0571163
0571958
0571170
0571187
0571194
0571125
0571200
0571217
0571224
0571972
0571231
0571248
0571255
0571262
0572207
0571279
0571286
0571996
EDP #
or
e-Code
A012N22
A012N21
A012N20
A012N19
A012N18
A01211/64
A012N17
A012N16
A012N15
A012N14
A012N13
A0123/16
A012N12
A012N11
A012N10
A012N9
A012N8
A012N7
A01213/64
A012N6
A012N5
A012N4
A012N3
A0127/32
A012N2
A012N1
A012A
A01215/64
A012B
A012C
A012D
A0121/4
A012E
A012F
A012G
A01217/64
A012H
A012I
A012J
A012K
A0129/32
A012L
A012M
A01219/64
d1
Ø
N
5/16
O
P
21/64
Q
R
11/32
S
T
23/64
U
3/8
V
W
25/64
X
Y
13/32
Z
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
21/32
11/16
45/64
23/32
47/64
3/4
d1
d1
Ø
dec.
mm
Inch
7.671 0.3020
7.938 0.3125
8.026 0.3160
8.204 0.3230
8.334 0.3281
8.433 0.3320
8.611 0.3390
8.731 0.3438
8.839 0.3480
9.093 0.3580
9.128 0.3594
9.347 0.3680
9.525 0.3750
9.576 0.3770
9.804 0.3860
9.922 0.3906
10.084 0.3970
10.262 0.4040
10.319 0.4062
10.490 0.4130
10.716 0.4219
11.112 0.4375
11.509 0.4531
11.906 0.4688
12.303 0.4844
12.700 0.5000
13.097 0.5156
13.494 0.5312
13.891 0.5469
14.288 0.5625
14.684 0.5781
15.081 0.5938
15.478 0.6094
15.875 0.6250
16.669 0.6562
17.462 0.6875
17.859 0.7031
18.256 0.7188
18.653 0.7343
18.653 0.7500
l2
l1
Inch
3.1/16
3.3/16
3.3/16
3.5/16
3.5/16
3.7/16
3.7/16
3.7/16
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
4.13/16
4.13/16
4.13/16
4.13/16
4.13/16
5.3/16
5.3/16
5.3/16
5.3/16
5.5/8
5.5/8
5.5/8
6“
6“
Inch
4.3/8
4.1/2
4.1/2
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
5“
5“
5“
5.1/8
5.1/8
5.1/8
5.1/4
5.1/4
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
6.5/8
6.5/8
6.5/8
6.5/8
6.5/8
7.1/8
7.1/8
7.1/8
7.1/8
7.5/8
7.7/8
7.7/8
8“
8“
Stock #
0571293
0572139
0571767
0571774
0572009
0571781
0571798
0571903
0571804
0571811
0572016
0571828
0572078
0571835
0571842
0572023
0571859
0571866
0571927
0571873
0572030
0572160
0572047
0571941
0572085
0571880
0572092
0571965
0572108
0572191
0572115
0571989
0572122
0572153
0578728
0578711
0578742
0578735
0578766
0578759
EDP #
or
e-Code
A012N
A0125/16
A012O
A012P
A01221/64
A012Q
A012R
A01211/32
A012S
A012T
A01223/64
A012U
A0123/8
A012V
A012W
A01225/64
A012X
A012Y
A01213/32
A012Z
A01227/64
A0127/16
A01229/64
A01215/32
A01231/64
A0121/2
A01233/64
A01217/32
A01235/64
A0129/16
A01237/64
A01219/32
A01239/64
A0125/8
A01221/32
A01211/16
A01245/64
A01223/32
A01247/64
A0123/4
67
A002
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Øh8
mm
1.00
1.10
1.20
1.30
1.40
1.50
1.60
1.70
1.80
1.90
2.00
2.10
2.20
2.30
2.40
2.50
2.60
2.70
2.80
2.90
3.00
3.10
3.20
3.25
3.30
3.40
3.50
3.60
3.70
3.80
3.90
4.00
4.10
4.20
68
d1
dec.
Inch
0.0393
0.0433
0.0472
0.0511
0.0551
0.0590
0.0629
0.0669
0.0708
0.0748
0.0787
0.0826
0.0866
0.0905
0.0944
0.0984
0.1023
0.1062
0.1102
0.1141
0.1181
0.1220
0.1259
0.1280
0.1299
0.1338
0.1377
0.1417
0.1456
0.1496
0.1535
0.1574
0.1614
0.1653
l2
mm
12
14
16
16
18
18
20
20
22
22
24
24
27
27
30
30
30
33
33
33
33
36
36
36
36
39
39
39
39
43
43
43
43
43
l1
mm
34
36
38
38
40
40
43
43
46
46
49
49
53
53
57
57
57
61
61
61
61
65
65
65
65
70
70
70
70
75
75
75
75
75
Stock #
0376782
0376799
0376805
0376812
0376829
0376836
0376843
0376850
0376867
0376874
0376041
0376058
0376898
0376904
0376911
0376065
0376072
0376089
0376096
0376102
0350577
0350584
0350607
0605356
0350614
0350621
0350638
0350652
0350669
0350676
0350683
0350706
0350713
0350720
EDP #
or
e-Code
A0021.0
A0021.1
A0021.2
A0021.3
A0021.4
A0021.5
A0021.6
A0021.7
A0021.8
A0021.9
A0022.0
A0022.1
A0022.2
A0022.3
A0022.4
A0022.5
A0022.6
A0022.7
A0022.8
A0022.9
A0023.0
A0023.1
A0023.2
A0023.25
A0023.3
A0023.4
A0023.5
A0023.6
A0023.7
A0023.8
A0023.9
A0024.0
A0024.1
A0024.2
d1
Øh8
mm
4.30
4.40
4.50
4.60
4.70
4.80
4.90
5.00
5.10
5.20
5.30
5.40
5.50
5.60
5.70
5.80
5.90
6.00
6.10
6.20
6.30
6.40
6.50
6.60
6.70
6.80
6.90
7.00
7.10
7.20
7.30
7.40
7.50
7.60
d1
dec.
Inch
0.1692
0.1732
0.1771
0.1811
0.1850
0.1889
0.1929
0.1968
0.2007
0.2047
0.2086
0.2125
0.2165
0.2204
0.2244
0.2283
0.2322
0.2362
0.2401
0.2440
0.2480
0.2519
0.2559
0.2598
0.2637
0.2677
0.2716
0.2755
0.2795
0.2834
0.2874
0.2913
0.2952
0.2992
l2
mm
47
47
47
47
47
52
52
52
52
52
52
57
57
57
57
57
57
57
63
63
63
63
63
63
63
69
69
69
69
69
69
69
69
75
l1
mm
80
80
80
80
80
86
86
86
86
86
86
93
93
93
93
93
93
93
101
101
101
101
101
101
101
109
109
109
109
109
109
109
109
117
Stock #
0350737
0350751
0350768
0350775
0350782
0350805
0350812
0350829
0350836
0350850
0350867
0350874
0350881
0350904
0350911
0350928
0350935
0350959
0350966
0350973
0350980
0351000
0351017
0351024
0351031
0351055
0351062
0351079
0351086
0351109
0351116
0351123
0351130
0351154
EDP #
or
e-Code
A0024.3
A0024.4
A0024.5
A0024.6
A0024.7
A0024.8
A0024.9
A0025.0
A0025.1
A0025.2
A0025.3
A0025.4
A0025.5
A0025.6
A0025.7
A0025.8
A0025.9
A0026.0
A0026.1
A0026.2
A0026.3
A0026.4
A0026.5
A0026.6
A0026.7
A0026.8
A0026.9
A0027.0
A0027.1
A0027.2
A0027.3
A0027.4
A0027.5
A0027.6
A002
d1
Øh8
mm
7.70
7.80
7.90
8.00
8.10
8.20
8.30
8.40
8.50
8.60
8.70
8.80
8.90
9.00
9.10
9.20
9.30
9.40
9.50
9.60
9.70
9.80
9.90
10.00
10.10
10.20
10.30
10.40
10.50
10.60
10.70
10.80
10.90
11.00
11.10
11.20
11.30
11.40
d1
dec.
Inch
0.3031
0.3070
0.3110
0.3149
0.3188
0.3228
0.3267
0.3307
0.3346
0.3385
0.3425
0.3464
0.3503
0.3543
0.3582
0.3622
0.3661
0.3700
0.3740
0.3779
0.3818
0.3858
0.3897
0.3937
0.3976
0.4015
0.4055
0.4094
0.4133
0.4173
0.4212
0.4251
0.4291
0.4330
0.4370
0.4409
0.4448
0.4488
l2
mm
75
75
75
75
75
75
75
75
75
81
81
81
81
81
81
81
81
81
81
87
87
87
87
87
87
87
87
87
87
87
94
94
94
94
94
94
94
94
l1
mm
117
117
117
117
117
117
117
117
117
125
125
125
125
125
125
125
125
125
125
133
133
133
133
133
133
133
133
133
133
133
142
142
142
142
142
142
142
142
Stock #
0351161
0351178
0351185
0351208
0351215
0351222
0351239
0351253
0351260
0351277
0351284
0351307
0351314
0351321
0351338
0351352
0351369
0351376
0351383
0351406
0351413
0351420
0351437
0351451
0351468
0351475
0351482
0351505
0351512
0351529
0351536
0351550
0351567
0351574
0351581
0351604
0351611
0351628
EDP #
or
e-Code
A0027.7
A0027.8
A0027.9
A0028.0
A0028.1
A0028.2
A0028.3
A0028.4
A0028.5
A0028.6
A0028.7
A0028.8
A0028.9
A0029.0
A0029.1
A0029.2
A0029.3
A0029.4
A0029.5
A0029.6
A0029.7
A0029.8
A0029.9
A00210.0
A00210.1
A00210.2
A00210.3
A00210.4
A00210.5
A00210.6
A00210.7
A00210.8
A00210.9
A00211.0
A00211.1
A00211.2
A00211.3
A00211.4
d1
Øh8
mm
11.50
11.60
11.70
11.80
11.90
12.00
12.10
12.20
12.30
12.40
12.50
12.60
12.70
12.80
12.90
13.00
13.10
13.20
13.25
13.30
13.40
13.50
13.60
13.70
13.75
13.80
13.90
14.00
14.25
14.50
14.75
15.00
15.25
15.50
15.75
16.00
d1
dec.
Inch
0.4527
0.4566
0.4606
0.4645
0.4685
0.4724
0.4763
0.4803
0.4842
0.4881
0.4920
0.4960
0.5000
0.5039
0.5078
0.5118
0.5157
0.5196
0.5216
0.5236
0.5275
0.5314
0.5354
0.5393
0.5413
0.5433
0.5472
0.5511
0.5610
0.5708
0.5807
0.5905
0.6003
0.6102
0.6200
0.6299
l2
mm
94
94
94
94
101
101
101
101
101
101
101
101
101
101
101
101
101
101
108
108
108
108
108
108
108
108
108
108
114
114
114
114
120
120
120
120
l1
mm
142
142
142
142
151
151
151
151
151
151
151
151
151
151
151
151
151
151
160
160
160
160
160
160
160
160
160
160
169
169
169
169
178
178
178
178
Stock #
0351635
0351659
0351666
0351673
0351680
0351703
0351710
0351727
0351734
0351758
0351765
0351772
0351796
0351802
0351819
0351826
0385180
0385524
0385579
0385197
0385531
0385548
0385203
0385210
0385586
0385227
0385494
0384497
0385234
0385241
0385258
0385265
0385272
0385289
0385296
0385302
EDP #
or
e-Code
A00211.5
A00211.6
A00211.7
A00211.8
A00211.9
A00212.0
A00212.1
A00212.2
A00212.3
A00212.4
A00212.5
A00212.6
A00212.7
A00212.8
A00212.9
A00213.0
A00213.1
A00213.2
A00213.25
A00213.3
A00213.4
A00213.5
A00213.6
A00213.7
A00213.75
A00213.8
A00213.9
A00214.0
A00214.25
A00214.5
A00214.75
A00215.0
A00215.25
A00215.5
A00215.75
A00216.0
69
QC21CO
Ɣ Jobber Drill
Ɣ Foret court
Ɣ Goujure Parabolique
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
70
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
l2
Inch
7/8
7/8
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
l1
Inch
1.7/8
2“
2“
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
3“
3“
3“
EDP #
or
e-Code
013504
015752
015751
015750
015749
015748
013505
015747
015746
015745
015744
015743
015742
013506
015741
015740
015739
015738
015737
015736
013507
015735
015734
015733
015732
015731
013508
015730
015729
015728
013509
015727
015726
015725
d1
Ø
Inch
24
23
5/32
22
21
20
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
A
15/64
B
C
D
d1
dec.
Inch
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2340
0.2344
0.2380
0.2420
0.2460
l2
Inch
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
l1
Inch
3.1/8
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
3.7/8
4“
4“
4“
EDP #
or
e-Code
015724
015723
013510
015722
015721
015720
015719
015718
013511
015717
015716
015715
015714
015713
013512
015712
015711
015710
015709
015708
015707
013513
015706
015705
015704
015703
013514
015702
015701
013601
013515
013602
013603
013604
QC21CO - QC21COM
Ɣ Jobber Drill
d1
Ø
Inch
E
1/4
F
G
17/64
H
I
J
K
9/32
L
M
19/64
N
5/16
O
P
21/64
Q
R
d1
dec.
Inch
0.2500
0.2500
0.2570
0.2610
0.2656
0.2660
0.2720
0.2770
0.2810
0.2812
0.2900
0.2950
0.2969
0.3020
0.3125
0.3160
0.3230
0.3281
0.3320
0.3390
l2
Inch
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
2.15/16
3.1/16
3.1/16
3.1/16
3.3/16
3.3/16
3.5/16
3.5/16
3.7/16
3.7/16
Ɣ Foret court
l1
Inch
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.1/4
4.3/8
4.3/8
4.3/8
4.1/2
4.1/2
4.5/8
4.5/8
4.3/4
4.3/4
EDP #
or
e-Code
013605
013516
013606
013607
013517
013608
013609
013610
013611
013518
013612
013613
013519
013614
013520
013615
013616
013521
013617
013618
Ɣ Jobber Drill
d1
Ø
Inch
11/32
S
T
23/64
U
3/8
V
W
25/64
X
Y
13/32
Z
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3438
0.3480
0.3580
0.3594
0.3680
0.3750
0.3770
0.3860
0.3906
0.3970
0.4040
0.4062
0.4130
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.7/16
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.3/4
4.7/8
4.7/8
4.7/8
5“
5“
5“
5.1/8
5.1/8
5.1/8
5.1/4
5.1/4
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
Ɣ Foret court
EDP #
or
e-Code
013522
013619
013620
013523
013621
013524
013622
013623
013525
013624
013625
013526
013626
013527
013528
013529
013530
013531
013532
QC21COM
Ŷ
Ɣ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
7.00
7.50
8.00
8.20
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
0.2758
0.2953
0.3150
0.3228
l2
mm
18
24
30
33
39
43
47
52
52
57
57
57
63
69
69
69
75
75
l1
mm
40
49
57
61
70
75
80
86
86
93
93
93
101
109
109
109
117
117
EDP #
or
e-Code
016715
016720
016725
016730
016735
016740
016745
016750
016752
016755
016756
016760
016765
016768
016770
016775
016780
016782
d1
Ø
mm
8.50
8.60
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
d1
dec.
Inch
0.3346
0.3386
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
l2
mm
75
81
81
81
87
87
94
94
101
101
101
l1
mm
117
125
125
125
133
133
142
142
151
151
151
EDP #
or
e-Code
016785
016786
016790
016795
016800
016805
016810
016815
016820
016825
016830
71
QC21V
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
72
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
l2
Inch
7/8
7/8
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2.1/8
2.1/8
l1
Inch
1.7/8
1.7/8
2“
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
EDP #
or
e-Code
081404
080452
080451
080450
080449
080448
081405
080447
080446
080445
080444
080443
080442
081406
080441
080440
080439
080438
080437
080436
081407
080435
080434
080433
080432
080431
081408
080430
080429
080428
081409
080427
080426
080425
080424
080423
081410
080422
080421
080420
d1
Ø
Inch
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
04844
0.5000
l2
Inch
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
080419
080418
081411
080417
080416
080415
080414
080413
081412
080412
080411
080410
080409
080408
080407
081413
080406
080405
080404
080403
081414
080402
080401
081415
081416
081417
081418
081419
081420
081421
081422
081423
081424
081425
081426
081427
081428
081429
081430
081431
081432
QC21G
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
l2
Inch
7/8
7/8
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2.1/8
2.1/8
l1
Inch
1.7/8
1.7/8
2“
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
EDP #
or
e-Code
081704
080552
080551
080550
080549
080548
081705
080547
080546
080545
080544
080543
080542
081706
080541
080540
080539
080538
080537
080536
081707
080535
080534
080533
080532
080531
081708
080530
080529
080528
081709
080527
080526
080525
080524
080523
081710
080522
080521
080520
d1
Ø
Inch
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4/7/8
5“
5.1/8
5.1/4
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
080519
080518
081711
080517
080516
080515
080514
080513
081712
080512
080511
080510
080509
080508
080507
081713
080506
080505
080504
080503
081714
080502
080501
081715
081716
081717
081718
081719
081720
081721
081722
081723
081724
081725
081726
081728
081729
081730
081731
081732
73
QC21
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
74
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
l2
Inch
7/8
7/8
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
l1
Inch
1.7/8
1.7/8
2“
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
EDP #
or
e-Code
081604
080652
080651
080650
080649
080648
081605
080647
080646
080645
080644
080643
080642
081606
080641
080640
080639
080638
080637
080636
081607
080635
080634
080633
080632
080631
081608
080630
080629
080628
081609
080627
080626
080625
080624
080623
081610
080622
080621
080620
080619
080618
d1
Ø
Inch
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
081611
080617
080616
080615
080614
080613
081612
080612
080611
080610
080609
080608
080607
081613
080606
080605
080604
080603
081614
080602
080601
081615
081616
081617
081618
081619
081620
081621
081622
081623
081624
081625
081626
081627
081628
081629
081630
081631
081632
QC21P
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
l2
Inch
7/8
7/8
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2.1/8
2.1/8
l1
Inch
1.7/8
1.7/8
2“
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
EDP #
or
e-Code
015804
019452
019451
019450
019449
019448
015805
019447
019446
019445
019444
019443
019442
015806
019441
019440
019439
019438
019437
019436
015807
019435
019434
019433
019432
019431
015808
019430
019429
019428
015809
019427
019426
019425
019424
019423
015810
019422
019421
019420
d1
Ø
Inch
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
A
15/64
B
C
D
E
1/4
F
G
17/64
H
I
J
K
9/32
L
d1
dec.
Inch
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2340
0.2344
0.2380
0.2420
0.2460
0.2500
0.2500
0.2570
0.2610
0.2656
0.2660
0.2720
0.2770
0.2810
0.2812
0.2900
l2
Inch
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
2.15/16
l1
Inch
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
3.7/8
4“
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.1/4
EDP #
or
e-Code
019419
019418
015811
019417
019416
019415
019414
019413
015812
019412
019411
019410
019409
019408
019407
015813
019406
019405
019404
019403
015814
019402
019401
019301
015815
019302
019303
019304
019305
015816
019306
019307
015817
019308
019309
019310
019311
015818
019312
75
QC21P - QC21GM
Ɣ Jobber Drill
d1
Ø
Inch
M
19/64
N
5/16
O
P
21/64
Q
R
11/32
S
T
23/64
U
3/8
V
W
25/64
X
Y
13/32
d1
dec.
Inch
0.2950
0.2969
0.3020
0.3125
0.3160
0.3230
0.3281
0.3320
0.3390
0.3438
0.3480
0.3580
0.3594
0.3680
0.3750
0.3770
0.3860
0.3906
0.3970
0.4040
0.4062
l2
Inch
3.1/16
3.1/16
3.1/16
3.3/16
3.3/16
3.5/16
3.5/16
3.7/16
3.7/16
3.7/16
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
Ɣ Foret court
l1
Inch
4.3/8
4.3/8
4.3/8
4.1/2
4.1/2
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
5“
5“
5“
5.1/8
5.1/8
5.1/8
5.1/4
5.1/4
EDP #
or
e-Code
019313
015819
019314
015820
019315
019316
015821
019317
019318
015822
019319
019320
015823
019321
015824
019322
019323
015825
019324
019325
015826
d1
Ø
Inch
Z
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
l1
mm
40
49
57
61
70
75
80
86
86
93
93
93
101
109
109
109
EDP #
or
e-Code
019815
019820
019825
019830
019835
019840
019845
019850
019852
019855
019856
019860
019865
019868
019870
019875
d1
Ø
mm
8.00
8.20
8.50
8.60
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
d1
dec.
Inch
0.4130
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
4.13/16
4.13/16
4.13/16
4.13/16
4.13/16
5.3/16
5.3/16
5.3/16
5.3/16
5.3/16
5.5/8
5.5/8
l1
Inch
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
6.5/8
6.5/8
6.5/8
6.5/8
6.5/8
7.1/8
7.1/8
7.1/8
7.1/8
7.1/8
7.5/8
7.5/8
EDP #
or
e-Code
019326
015827
015828
015829
015830
015831
015832
015833
015834
015835
015836
015837
015838
015839
015840
015841
015842
015843
015844
l1
mm
117
117
117
125
125
125
133
133
142
142
151
151
151
EDP #
or
e-Code
019880
019882
019885
019886
019890
019895
019900
019905
019910
019915
019920
019925
019930
QC21GM
Ŷ
Ɣ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
7.00
7.50
76
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
0.2756
0.2953
l2
mm
18
24
30
33
39
43
47
52
52
57
57
57
63
69
69
69
d1
dec.
Inch
0.3150
0.3228
0.3346
0.3386
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
l2
mm
75
75
75
81
81
81
87
87
94
94
101
101
101
QC21M - QC21PM
Ɣ Jobber Drill
Ɣ Foret court
QC21M
Ɣ
Ŷ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
l2
mm
18
24
30
33
39
43
47
52
52
57
57
57
63
69
l1
mm
40
49
57
61
70
75
80
86
86
93
93
93
101
109
EDP #
or
e-Code
012115
012120
012125
012130
012135
012140
012145
012150
012152
012155
012156
012160
012165
012168
d1
Ø
mm
7.00
7.50
8.00
8.20
8.50
8.60
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
d1
dec.
Inch
0.2756
0.2953
0.3150
0.3228
0.3346
0.3386
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
l2
mm
69
69
75
75
75
81
81
81
87
87
94
94
101
101
101
EDP #
or
e-Code
013115
013120
013125
013130
013135
013140
013145
013150
013152
013155
013156
013160
013165
013168
013170
013175
013180
013182
013185
013186
d1
Ø
mm
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
d1
dec.
Inch
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
0.5315
0.5512
0.5709
0.5906
0.6102
0.6299
0.6496
0.6693
0.6890
l2
mm
81
81
87
87
94
94
101
101
101
108
108
114
114
120
120
125
125
130
l1
mm
109
109
117
117
117
125
125
125
133
133
142
142
151
151
151
EDP #
or
e-Code
012170
012175
012180
012182
012185
012186
012190
012195
012900
012905
012910
012915
012920
012925
012930
QC21PM
Ŷ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
7.00
7.50
8.00
8.20
8.50
8.60
Ɣ
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
0.2756
0.2953
0.3150
0.3228
0.3346
0.3386
1
l2
mm
18
24
30
33
39
43
47
52
52
57
57
57
63
69
69
69
75
75
75
81
l
mm
40
49
57
61
70
75
80
86
86
93
93
93
101
109
109
109
117
117
117
125
1
l
mm
125
125
133
133
142
142
151
151
151
160
160
169
169
178
178
184
184
191
EDP #
or
e-Code
013190
013195
014900
014905
014910
014915
014920
014925
014930
014935
014940
014945
014950
014955
014960
014965
014970
014975
77
R10CO
Ɣ Jobber Drill
Ɣ Type J
Ɣ Heavy-Duty
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
1)
d1
dec.
Inch
0.0156
0.0312
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
l2
Inch
3/16
1/2
3/4
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
l1
Inch
3/4
1.3/8
1.3/4
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
EDP #
or
e-Code
010301
010302
010303
010304
010305
010306
010307
010308
010309
010310
010311
010312
010313
010314
010315
010316
010317
010318
010319
010320
010321
010322
1)
1)
d1
Ø
Inch
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
d1
dec.
Inch
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
4.13/16
4.13/16
4.13/16
4.13/16
4.13/16
5.3/16
5.3/16
5.3/16
5.3/16
5.3/16
5.5/8
5.5/8
l1
Inch
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
6.5/8
6.5/8
6.5/8
6.5/8
6.5/8
7.1/8
7.1/8
7.1/8
7.1/8
7.1/8
7.5/8
7.5/8
EDP #
or
e-Code
010323
010324
010325
010326
010327
010328
010329
010330
010331
010332
010333
010334
010335
010336
010337
010338
010339
010340
010341
010342
010343
010344
Not a split point
78
R18CO
Ɣ Foret court
Ɣ Jobber Drill
Ɣ Type J
Ɣ Heavy-Duty
Ŷ
Ɣ
d1
Ø
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
1)
d1
dec.
Inch
0.0135
0.0145
0.0160
0.0180
0.0200
0.0210
0.0225
0.0240
0.0250
0.0260
0.0280
0.0292
0.0310
0.0320
0.0330
0.0350
0.0360
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
l2
Inch
1/8
1/8
3/16
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
l1
Inch
3/4
3/4
7/8
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
EDP #
or
e-Code
018380
018379
018378
018377
018376
018375
018374
018373
018372
018371
018370
018369
018368
018367
018366
018365
018364
018363
018362
018361
018360
018359
018358
018357
018356
018355
018354
018353
018352
018351
018350
018349
018348
018347
018346
018345
018344
018343
018342
018341
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
d1
Ø
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
018340
018339
018338
018337
018336
018335
018334
018333
018332
018331
018330
018329
018328
018327
018326
018325
018324
018323
018322
018321
018320
018319
018318
018317
018316
018315
018314
018313
018312
018311
018310
018309
018308
018307
018306
018305
018304
018303
018302
018301
Not a split point
79
R15CO
Ɣ Jobber Drill
Ɣ Type J
Ɣ Heavy-Duty
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
80
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
3.1/16
3.1/16
l1
Inch
3.7/8
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
EDP #
or
e-Code
015301
015302
015303
015304
015305
015306
015307
015308
015309
015310
015311
015312
015313
015314
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
l1
Inch
4.1/2
4.5/8
4.3/4
4.3/4
4.7/8
4.7/8
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
EDP #
or
e-Code
015315
015316
015317
015318
015319
015320
015321
015322
015323
015324
015325
015326
2ACO
Ɣ Jobber Drill
Ɣ Heavy-Duty
Ɣ Type J
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
mm
1.00
1.05
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.20
2.30
2.35
2.40
2.50
2.60
2.70
2.80
2.90
3.00
3.10
d1
decimal
Inch
0.0394
0.0413
0.0433
0.0453
0.0472
0.0492
0.0512
0.0531
0.0551
0.0571
0.0591
0.0610
0.0630
0.0650
0.0669
0.0689
0.0709
0.0728
0.0748
0.0768
0.0787
0.0807
0.0827
0.0866
0.0906
0.0925
0.0945
0.0984
0.1024
0.1063
0.1102
0.1142
0.1181
0.1220
l2
mm
l1
mm
12
12
14
14
16
16
16
18
18
18
18
20
20
20
20
22
22
22
22
24
24
24
24
27
27
27
30
30
30
33
33
33
33
36
34
34
36
36
38
38
38
40
40
40
40
43
43
43
43
46
46
46
46
49
49
49
49
53
53
53
57
57
57
61
61
61
61
65
EDP #
or
e-Code
016410
016355
016411
016356
016412
016357
016413
016358
016414
016359
016415
016360
016416
016361
016417
016362
016418
016363
016419
016364
016420
016365
016421
016422
016423
016368
016424
016425
016426
016427
016428
016429
016430
016431
d1
Ø
mm
3.20
3.25
3.30
3.40
3.50
3.60
3.70
3.75
3.80
4.00
4.10
4.20
4.25
4.30
4.40
4.50
4.70
4.80
5.00
5.10
5.20
5.25
5.30
5.50
5.60
5.70
5.90
6.00
6.10
6.20
6.30
6.40
6.50
6.60
d1
decimal
Inch
0.1260
0.1280
0.1299
0.1339
0.1378
0.1417
0.1457
0.1476
0.1496
0.1575
0.1614
0.1654
0.1673
0.1693
0.1732
0.1772
0.1850
0.1890
0.1969
0.2008
0.2047
0.2067
0.2087
0.2165
0.2205
0.2244
0.2323
0.2362
0.2402
0.2441
0.2480
0.2520
0.2559
0.2598
l2
mm
l1
mm
36
36
36
39
39
39
39
39
43
43
43
43
43
47
47
47
47
52
52
52
52
52
52
57
57
57
57
57
63
63
63
63
63
63
65
65
65
70
70
70
70
70
75
75
75
75
75
80
80
80
80
86
86
86
86
86
86
93
93
93
93
93
101
101
101
101
101
101
EDP #
or
e-Code
016432
016371
016433
016434
016435
016436
016437
016372
016438
016440
016441
016442
016373
016443
016444
016445
016447
016448
016450
016451
016452
016375
016453
016455
016456
016457
016459
016460
016461
016462
016463
016464
016465
016466
81
2ACO
Ɣ Jobber Drill
Ɣ Heavy-Duty
d1
Ø
mm
6.70
6.80
6.90
7.00
7.10
7.20
7.25
7.30
7.50
7.80
7.90
8.00
8.20
8.40
8.50
8.80
8.90
9.00
9.10
82
d1
decimal
Inch
0.2638
0.2677
0.2717
0.2756
0.2795
0.2835
0.2854
0.2874
0.2953
0.3071
0.3110
0.3150
0.3228
0.3307
0.3346
0.3465
0.3504
0.3543
0.3583
Ɣ Foret court
l2
mm
l1
mm
63
69
69
69
69
69
69
69
69
75
75
75
75
75
75
81
81
81
81
101
109
109
109
109
109
109
109
109
117
117
117
117
117
117
125
125
125
125
EDP #
or
e-Code
016467
016468
016469
016470
016471
016472
016379
016473
016475
016478
016479
016480
016482
016484
016485
016488
016489
016490
016491
d1
Ø
mm
9.20
9.30
9.40
9.50
9.60
9.70
9.80
10.00
10.20
10.50
10.80
11.00
11.20
11.50
11.80
12.00
12.20
12.50
13.00
d1
decimal
Inch
0.3622
0.3661
0.3701
0.3740
0.3780
0.3819
0.3858
0.3937
0.4016
0.4134
0.4252
0.4331
0.4409
0.4528
0.4646
0.4724
0.4803
0.4921
0.5118
l2
mm
l1
mm
81
81
81
81
87
87
87
87
87
87
94
94
94
94
94
101
101
101
101
125
125
125
125
133
133
133
133
133
133
142
142
142
142
142
151
151
151
151
EDP #
or
e-Code
016492
016493
016494
016495
016496
016497
016498
016300
016302
016305
016308
016310
016312
016315
016318
016320
016322
016325
016330
R88CO - R89CO
Ɣ Jobber Drill
Ɣ Type D
Ɣ Heavy-Duty
Ɣ Foret court
R88CO
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
7/16
1/2
5/8
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
l1
Inch
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
EDP #
or
e-Code
058704
058705
058706
058707
058708
058709
058710
058711
058712
058713
058714
058715
058716
058717
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
1.1/2
1.9/16
1.5/8
1.11/16
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/16
2.1/8
2.1/8
2.3/16
2.1/4
l1
Inch
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
058718
058719
058720
058721
058722
058723
058724
058725
058726
058727
058728
058729
058730
058731
058732
R89CO
d1
Ø
52
51
50
49
46
45
44
43
42
41
40
39
36
31
30
29
27
26
d1
dec.
Inch
0.0635
0.0670
0.0700
0.0730
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1065
0.1200
0.1285
0.1360
0.1440
0.1470
l2
Inch
7/16
1/2
1/2
1/2
9/16
9/16
9/16
5/8
5/8
5/8
13/16
13/16
13/16
7/8
15/16
15/16
1“
1“
l1
Inch
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.3/4
2.3/4
2.7/8
3“
3“
EDP #
or
e-Code
058852
058851
058850
058849
058846
058845
058844
058843
058842
058841
058840
058839
058836
058831
058830
058829
058827
058826
d1
Ø
25
24
22
21
20
16
13
12
11
10
9
8
7
6
5
3
d1
dec.
Inch
0.1495
0.1520
0.1570
0.1590
0.1610
0.1770
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2130
l2
Inch
1“
1“
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.3/16
1.3/16
1.3/16
1.3/16
1.3/16
1.1/4
1.1/4
1.1/4
l1
Inch
3“
3.1/8
3.1/8
3.1/4
3.1/4
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
EDP #
or
e-Code
058825
058824
058822
058821
058820
058816
058813
058812
058811
058810
058809
058808
058807
058806
058805
058803
83
EZ10P - EZ18P
Ɣ Jobber Drill
Ɣ Parabolic flute
Ɣ Foret court
EZ10P
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
l2
Inch
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
l1
Inch
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
EDP #
or
e-Code
014604
014605
014606
014607
014608
014609
014610
014611
014612
014613
014614
014615
014616
014617
014618
014619
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
014620
014621
014622
014623
014624
014625
014626
014627
014628
014629
014630
014631
014632
EZ18P
d1
Ø
52
51
50
49
48
47
46
39
36
34
33
32
31
30
29
26
25
24
84
d1
dec.
Inch
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0995
0.1065
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1470
0.1495
0.1520
l2
Inch
7/8
1“
1“
1“
1“
1“
1.1/8
1.3/8
1.7/16
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.7/8
1.7/8
2“
l1
Inch
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.3/8
2.1/2
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
3“
3“
3.1/8
EDP #
or
e-Code
014752
014751
014750
014749
014748
014747
014746
014739
014736
014734
014733
014732
014731
014730
014729
014726
014725
014724
d1
Ø
23
21
19
18
17
16
15
14
12
10
9
7
5
3
2
1
d1
dec.
Inch
0.1540
0.1590
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1890
0.1935
0.1960
0.2010
0.2055
0.2130
0.2210
0.2280
l2
Inch
2“
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
3.1/8
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
014723
014721
014719
014718
014717
014716
014715
014714
014712
014710
014709
014707
014705
014703
014702
014701
HX10 - HX15
Ɣ Jobber Drill
Ɣ Foret court
HX10
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1563
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2813
0.2969
l2
Inch
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
l1
Inch
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
EDP #
or
e-Code
022004
022005
022006
022007
022008
022009
022010
022011
022012
022013
022014
022015
022016
022017
022018
022019
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4063
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
022020
022021
022022
022023
022024
022025
022026
022027
022028
022029
022030
022031
022032
HX15
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
3.1/16
3.1/16
l1
Inch
3.7/8
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
EDP #
or
e-Code
022201
022202
022203
022204
022205
022206
022207
022208
022209
022210
022211
022212
022213
022214
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
l1
Inch
4.1/2
4.5/8
4.3/4
4.3/4
4.7/8
4.7/8
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
EDP #
or
e-Code
022215
022216
022217
022218
022219
022220
022221
022222
022223
022224
022225
022226
85
HX18
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
86
d1
dec.
Inch
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
l2
Inch
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
l1
Inch
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
EDP #
or
e-Code
022152
022151
022150
022149
022148
022147
022146
022145
022144
022143
022142
022141
022140
022139
022138
022137
022136
022135
022134
022133
022132
022131
022130
022129
022128
022127
d1
Ø
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
022126
022125
022124
022123
022122
022121
022120
022119
022118
022117
022116
022115
022114
022113
022112
022111
022110
022109
022108
022107
022106
022105
022104
022103
022102
022101
R10B
Ɣ Jobber Drill
Ɣ Type B
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
l2
Inch
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
l1
Inch
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
EDP #
or
e-Code
010204
010205
010206
010207
010208
010209
010210
010211
010212
010213
010214
010215
010216
010217
010218
010219
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
010220
010221
010222
010223
010224
010225
010226
010227
010228
010229
010230
010231
010232
87
R18B - R15B
Ɣ Jobber Drill
Ɣ Type B
Ɣ Foret court
R18B
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch
l2Inch
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
l1Inch
EDP # or
e-Code
d1
Ø
d1
dec.
Inch
l2Inch
l1Inch
EDP # or
e-Code
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
018252
018251
018250
018249
018248
018247
018246
018245
018244
018243
018242
018241
018240
018239
018238
018237
018236
018235
018234
018233
018232
018231
018230
018229
018228
018227
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
018226
018225
018224
018223
018222
018221
018220
018219
018218
018217
018216
018215
018214
018213
018212
018211
018210
018209
018208
018207
018206
018205
018204
018203
018202
018201
R15B
d1Ø
Inch
A
B
C
D
E
F
G
H
I
J
K
L
88
d1decimal
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
l2inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
l1Inch
3.7/8
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
EDP #
or e-Code
015201
015202
015203
015204
015205
015206
015207
015208
015209
015210
015211
015212
d1Ø
Inch
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1decimal
Inch
0.2950
0.3020
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2inch
3.1/16
3.1/16
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
l1Inch
4.3/8
4.3/8
4.1/2
4.5/8
4.3/4
4.3/4
4.7/8
4.7/8
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
EDP #
or e-Code
015213
015214
015215
015216
015217
015218
015219
015220
015221
015222
015223
015224
015225
015226
R10A - R18A
Ɣ Jobber Drill
Ɣ Type A
Ɣ Foret court
R10A
Ŷ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
Ɣ
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
l2
Inch
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2.0
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
l1
Inch
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
EDP #
or
e-Code
010104
010105
010106
010107
010108
010109
010110
010111
010112
010113
010114
010115
010116
010117
010118
010119
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
010120
010121
010122
010123
010124
010125
010126
010127
010128
010129
010130
010131
010132
R18A
d1
Ø
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
d1
dec.
Inch
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
l2
Inch
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
l1
Inch
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
EDP #
or
e-Code
018152
018151
018150
018149
018148
018147
018146
018145
018144
018143
018142
018141
018140
018139
018138
018137
018136
018135
018134
018133
018132
018131
018130
018129
018128
018127
d1
Ø
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
l1
Inch
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
Inch
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
018126
018125
018124
018123
018122
018121
018120
018119
018118
018117
018116
018115
018114
018113
018112
018111
018110
018109
018108
018107
018106
018105
018104
018103
018102
018101
89
R15A
Ɣ Jobber Drill
Ɣ Type A
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
90
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
3.1/16
3.1/16
l1
Inch
3.7/8
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
EDP #
or
e-Code
015101
015102
015103
015104
015105
015106
015107
015108
015109
015110
015111
015112
015113
015114
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
l1
Inch
4.1/2
4.5/8
4.3/4
4.3/4
4.7/8
4.7/8
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
EDP #
or
e-Code
015115
015116
015117
015118
015119
015120
015121
015122
015123
015124
015125
015126
R10
Ɣ Jobber Drill
Ɣ Broca, serie corta
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
d1
dec.
Inch
0.0156
0.0312
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
l2
Inch
3/16
1/2
3/4
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
l1
Inch
3/4
1.3/8
1.3/4
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
EDP #
or
e-Code
010001
010002
010003
010004
010005
010006
010007
010008
010009
010010
010011
010012
010013
010014
010015
010016
010017
010018
010019
010020
010021
010022
d1
Ø
Inch
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
d1
dec.
Inch
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
4.13/16
4.13/16
4.13/16
4.13/16
4.13/16
5.3/16
5.3/16
5.3/16
5.3/16
5.3/16
5.5/8
5.5/8
l1
Inch
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
6.5/8
6.5/8
6.5/8
6.5/8
6.5/8
7.1/8
7.1/8
7.1/8
7.1/8
7.1/8
7.5/8
7.5/8
EDP #
or
e-Code
010023
010024
010025
010026
010027
010028
010029
010030
010031
010032
010033
010034
010035
010036
010037
010038
010039
010040
010041
010042
010043
010044
91
R18
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
92
d1
dec.
Inch
0.0135
0.0145
0.0160
0.0180
0.0200
0.0210
0.0225
0.0240
0.0250
0.0260
0.0280
0.0292
0.0310
0.0320
0.0330
0.0350
0.0360
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
l2
Inch
1/8
1/8
3/16
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
l1
Inch
3/4
3/4
7/8
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
EDP #
or
e-Code
018080
018079
018078
018077
018076
018075
018074
018073
018072
018071
018070
018069
018068
018067
018066
018065
018064
018063
018062
018061
018060
018059
018058
018057
018056
018055
018054
018053
018052
018051
018050
018049
018048
018047
018046
018045
018044
018043
018042
018041
d1
Ø
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
d1
dec.
Inch
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
l2
Inch
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
l1
Inch
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
EDP #
or
e-Code
018040
018039
018038
018037
018036
018035
018034
018033
018032
018031
018030
018029
018028
018027
018026
018025
018024
018023
018022
018021
018020
018019
018018
018017
018016
018015
018014
018013
12
11
10
9
8
7
6
5
4
3
2
1
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
018012
018011
018010
018009
018008
018007
018006
018005
018004
018003
018002
018001
R15
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
3.1/16
3.1/16
l1
Inch
3.7/8
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
EDP #
or
e-Code
015001
015002
015003
015004
015005
015006
015007
015008
015009
015010
015011
015012
015013
015014
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
l1
Inch
4.1/2
4.5/8
4.3/4
4.3/4
4.7/8
4.7/8
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
EDP #
or
e-Code
015015
015016
015017
015018
015019
015020
015021
015022
015023
015024
015025
015026
93
2AB
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
mm
1.00
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.70
1.75
1.80
1.90
1.95
2.00
2.10
2.20
2.30
2.35
2.40
2.50
2.60
2.70
2.90
3.00
3.10
3.20
3.25
3.30
3.40
3.50
3.60
3.70
4.00
4.10
4.20
4.30
94
d1
decimal
Inch
0.0394
0.0433
0.0453
0.0472
0.0492
0.0512
0.0531
0.0551
0.0571
0.0591
0.0610
0.0630
0.0669
0.0689
0.0709
0.0748
0.0768
0.0787
0.0827
0.0866
0.0906
0.0925
0.0945
0.0984
0.1024
0.1063
0.1142
0.1181
0.1220
0.1260
0.1280
0.1299
0.1339
0.1378
0.1417
0.1457
0.1575
0.1614
0.1654
0.1693
l2
mm
l1
mm
12.0
14.0
14.0
16.0
16.0
16.0
18.0
18.0
18.0
18.0
20.0
20.0
20.0
22.0
22.0
22.0
24.0
24.0
24.0
27.0
27.0
27.0
30.0
30.0
30.0
33.0
33.0
33.0
36.0
36.0
36.0
36.0
39.0
39.0
39.0
39.0
43.0
43.0
43.0
47.0
34
36
36
38
38
38
40
40
40
40
43
43
43
46
46
46
49
49
49
53
53
53
57
57
57
61
61
61
65
65
65
65
70
70
70
70
75
75
75
80
EDP #
or
e-Code
029010
029011
029256
029012
029257
029013
029258
029014
029259
029015
029260
029016
029017
029262
029018
029019
029264
029020
029021
029022
029023
029268
029024
029025
029026
029027
029029
029030
029031
029032
029271
029033
029034
029035
029036
029037
029040
029041
029042
029043
d1
Ø
mm
4.40
4.50
4.60
4.80
5.00
5.10
5.20
5.30
5.40
5.50
5.60
5.70
5.75
5.80
6.00
6.10
6.20
6.30
6.40
6.50
6.60
6.70
6.75
6.80
7.00
7.20
7.25
7.30
7.40
7.50
7.60
7.80
d1
decimal
Inch
0.1732
0.1772
0.1811
0.1890
0.1969
0.2008
0.2047
0.2087
0.2126
0.2165
0.2205
0.2244
0.2264
0.2283
0.2362
0.2402
0.2441
0.2480
0.2520
0.2559
0.2598
0.2638
0.2657
0.2677
0.2756
0.2835
0.2854
0.2874
0.2913
0.2953
0.2992
0.3071
l2
mm
l1
mm
47.0
47.0
47.0
52.0
52.0
52.0
52.0
52.0
57.0
57.0
57.0
57.0
57.0
57.0
57.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
69.0
69.0
69.0
69.0
69.0
69.0
69.0
69.0
75.0
75.0
80
80
80
86
86
86
86
86
93
93
93
93
93
93
93
101
101
101
101
101
101
101
109
109
109
109
109
109
109
109
117
117
7.90
8.00
8.10
8.20
8.25
8.40
8.50
8.60
0.3110
0.3150
0.3189
0.3228
0.3248
0.3307
0.3346
0.3386
75.0
75.0
75.0
75.0
75.0
75.0
75.0
81.0
EDP #
or
e-Code
029044
029045
029046
029048
029050
029051
029052
029053
029054
029055
029056
029057
029276
029058
029060
029061
029062
029063
029064
029065
029066
029067
029278
029068
029070
029072
029279
029073
029074
029075
029076
029078
117
117
117
117
117
117
117
125
029079
029080
029081
029082
029282
029084
029085
029086
2AB - 2A
d1
Ø
mm
8.70
8.75
8.80
8.90
9.00
9.30
9.40
9.50
9.60
9.70
9.80
9.90
10.00
10.20
10.30
10.50
10.80
10.90
d1
decimal
Inch
0.3425
0.3445
0.3465
0.3504
0.3543
0.3661
0.3701
0.3740
0.3780
0.3819
0.3858
0.3898
0.3937
0.4016
0.4055
0.4134
0.4252
0.4291
l2
mm
l1
mm
81.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
87.0
87.0
87.0
87.0
87.0
87.0
87.0
87.0
94.0
94.0
125
125
125
125
125
125
125
125
133
133
133
133
133
133
133
133
142
142
EDP #
or
e-Code
029087
029283
029088
029089
029090
029093
029094
029095
029096
029097
029098
029099
029100
029102
029103
029105
029108
029109
d1
Ø
mm
11.00
11.20
11.30
11.40
11.50
11.70
11.80
12.00
12.10
12.20
12.50
12.70
12.80
12.90
13.00
13.50
14.00
14.50
15.00
d1
decimal
Inch
0.4331
0.4409
0.4449
0.4488
0.4528
0.4606
0.4646
0.4724
0.4764
0.4803
0.4921
0.5000
0.5039
0.5079
0.5118
0.5315
0.5512
0.5709
0.5906
l2
mm
l1
mm
94.0
94.0
94.0
94.0
94.0
94.0
94.0
101.0
101.0
101.0
101.0
101.0
101.0
101.0
101.0
108.0
108.0
114.0
114.0
142
142
142
142
142
142
142
151
151
151
151
151
151
151
151
160
160
169
169
EDP #
or
e-Code
029110
029112
029113
029114
029115
029117
029118
029120
029121
029122
029125
029127
029128
029129
029130
016135
016140
016145
016150
2A
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
mm
0.15
0.16
0.17
0.18
0.19
0.20
0.21
0.22
0.23
0.24
d1
decimal
Inch
0.0059
0.0063
0.0067
0.0071
0.0075
0.0079
0.0083
0.0087
0.0091
0.0094
l2
mm
l1
mm
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
2.5
2.5
19
19
19
19
19
19
19
19
19
19
EDP #
or
e-Code
016215
016216
016217
016218
016219
016002
016221
016222
016223
016224
d1
Ø
mm
0.25
0.26
0.27
0.28
0.29
0.30
0.32
0.44
d1
decimal
Inch
0.0098
0.0102
0.0106
0.0110
0.0114
0.0118
0.0126
0.0173
l2
mm
l1
mm
3.0
3.0
3.0
3.0
3.0
3.0
4.0
5.0
19
19
19
19
19
19
19
20
EDP #
or
e-Code
016225
016226
016227
016228
016229
016003
016232
016244
95
2A
d1
Ø
mm
0.45
0.46
0.48
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
0.90
0.95
1.00
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
1.90
1.95
2.00
2.10
2.15
2.20
2.25
2.30
2.35
2.40
2.50
2.60
2.70
2.75
2.90
3.00
3.10
3.20
3.25
3.30
3.40
3.50
3.60
3.70
4.00
4.10
4.20
4.30
96
d1
decimal
Inch
0.0177
0.0181
0.0189
0.0197
0.0217
0.0236
0.0256
0.0276
0.0295
0.0315
0.0335
0.0354
0.0374
0.0394
0.0433
0.0453
0.0472
0.0492
0.0512
0.0531
0.0551
0.0571
0.0591
0.0610
0.0630
0.0650
0.0669
0.0689
0.0709
0.0748
0.0768
0.0787
0.0827
0.0846
0.0866
0.0886
0.0906
0.0925
0.0945
0.0984
0.1024
0.1063
0.1083
0.1142
0.1181
0.1220
0.1260
0.1280
0.1299
0.1339
0.1378
0.1417
0.1457
0.1575
0.1614
0.1654
0.1693
l2
mm
l1
mm
5.0
5.0
5.0
6.0
7.0
7.0
8.0
9.0
9.0
10.0
10.0
11.0
11.0
12.0
14.0
14.0
16.0
16.0
16.0
18.0
18.0
18.0
18.0
20.0
20.0
20.0
20.0
22.0
22.0
22.0
24.0
24.0
24.0
27.0
27.0
27.0
27.0
27.0
30.0
30.0
30.0
33.0
33.0
33.0
33.0
36.0
36.0
36.0
36.0
39.0
39.0
39.0
39.0
43.0
43.0
43.0
47.0
20
20
20
22
24
24
26
28
28
30
30
32
32
34
36
36
38
38
38
40
40
40
40
43
43
43
43
46
46
46
49
49
49
53
53
53
53
53
57
57
57
61
61
61
61
65
65
65
65
70
70
70
70
75
75
75
80
EDP #
or
e-Code
016245
016246
016248
016005
016250
016006
016251
016007
016252
016008
016253
016009
016254
016010
016011
016256
016012
016257
016013
016258
016014
016259
016015
016260
016016
016261
016017
016262
016018
016019
016264
016020
016021
016266
016022
016267
016023
016268
016024
016025
016026
016027
016270
016029
016030
016031
016032
016271
016033
016034
016035
016036
016037
016040
016041
016042
016043
d1
Ø
mm
4.40
4.50
4.60
4.80
5.00
5.10
5.20
5.30
5.40
5.50
5.60
5.70
5.75
5.80
6.00
6.10
6.20
6.30
6.40
6.50
6.60
6.70
6.75
6.80
7.00
7.20
7.25
7.30
7.40
7.50
7.60
7.80
7.85
7.90
8.00
8.10
8.20
8.25
8.40
8.50
8.60
8.70
8.75
8.80
8.90
9.00
9.30
9.40
9.50
9.60
9.70
9.80
9.90
10.00
10.20
10.30
10.50
d1
decimal
Inch
0.1732
0.1772
0.1811
0.1890
0.1969
0.2008
0.2047
0.2087
0.2126
0.2165
0.2205
0.2244
0.2264
0.2283
0.2362
0.2402
0.2441
0.2480
0.2520
0.2559
0.2598
0.2638
0.2657
0.2677
0.2756
0.2835
0.2854
0.2874
0.2913
0.2953
0.2992
0.3071
0.3091
0.3110
0.3150
0.3189
0.3228
0.3248
0.3307
0.3346
0.3386
0.3425
0.3445
0.3465
0.3504
0.3543
0.3661
0.3701
0.3740
0.3780
0.3819
0.3858
0.3898
0.3937
0.4016
0.4055
0.4134
l2
mm
l1
mm
47.0
47.0
47.0
52.0
52.0
52.0
52.0
52.0
57.0
57.0
57.0
57.0
57.0
57.0
57.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
69.0
69.0
69.0
69.0
69.0
69.0
69.0
69.0
75.0
75.0
75.0
75.0
75.0
75.0
75.0
75.0
75.0
75.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
81.0
87.0
87.0
87.0
87.0
87.0
87.0
87.0
87.0
80
80
80
86
86
86
86
86
93
93
93
93
93
93
93
101
101
101
101
101
101
101
109
109
109
109
109
109
109
109
117
117
117
117
117
117
117
117
117
117
125
125
125
125
125
125
125
125
125
133
133
133
133
133
133
133
133
EDP #
or
e-Code
016044
016045
016046
016048
016050
016051
016052
016053
016054
016055
016056
016057
016276
016058
016060
016061
016062
016063
016064
016065
016066
016067
016278
016068
016070
016072
016279
016073
016074
016075
016076
016078
029281
016079
016080
016081
016082
016282
016084
016085
016086
016087
016283
016088
016089
016090
016093
016094
016095
016096
016097
016098
016099
016100
016102
016103
016105
2A - R10P
d1
Ø
mm
10.60
10.80
10.90
11.00
11.20
11.30
11.40
11.50
11.70
11.80
12.00
12.10
12.20
12.50
d1
decimal
Inch
0.4173
0.4252
0.4291
0.4331
0.4409
0.4449
0.4488
0.4528
0.4606
0.4646
0.4724
0.4764
0.4803
0.4921
l2
mm
l1
mm
87.0
94.0
94.0
94.0
94.0
94.0
94.0
94.0
94.0
94.0
101.0
101.0
101.0
101.0
133
142
142
142
142
142
142
142
142
142
151
151
151
151
EDP #
or
e-Code
016106
016108
016109
016110
016112
016113
016114
016115
016117
016118
016120
016121
016122
016125
d1
Ø
mm
12.70
12.80
12.90
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
d1
decimal
Inch
0.5000
0.5039
0.5079
0.5118
0.5315
0.5512
0.5709
0.5906
0.6102
0.6299
0.6496
0.6693
0.6890
l2
mm
l1
mm
101.0
101.0
101.0
101.0
108.0
108.0
114.0
114.0
120.0
120.0
125.0
125.0
130.0
151
151
151
151
160
160
169
169
178
178
184
184
191
EDP #
or
e-Code
016127
016128
016129
016130
034135
034140
034145
034150
016155
016160
016165
016170
016175
R10P
Ɣ Foret court
Ɣ Jobber Drill
Ŷ
Ɣ
d1
Ø
Inch
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
d1
dec.
Inch
0.0156
0.0312
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
l2
Inch
3/16
1/2
3/4
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
l1
Inch
3/4
1.3/8
1.3/4
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
EDP #
or
e-Code
010601
010602
010603
010604
010605
010606
010607
010608
010609
010610
010611
010612
010613
010614
010615
010616
010617
010618
010619
010620
010621
010622
d1
Ø
Inch
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
d1
dec.
Inch
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
4.13/16
4.13/16
4.13/16
4.13/16
4.13/16
5.3/16
5.3/16
5.3/16
5.3/16
5.3/16
5.5/8
5.5/8
l1
Inch
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
6.5/8
6.5/8
6.5/8
6.5/8
6.5/8
7.1/8
7.1/8
7.1/8
7.1/8
7.1/8
7.5/8
7.5/8
EDP #
or
e-Code
010623
010624
010625
010626
010627
010628
010629
010630
010631
010632
010633
010634
010635
010636
010637
010638
010639
010640
010641
010642
010643
010644
97
R18P
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
98
d1
dec.
Inch
0.0059
0.0063
0.0067
0.0071
0.0075
0.0079
0.0083
0.0087
0.0091
0.0095
0.0100
0.0105
0.0110
0.0115
0.0120
0.0125
0.0130
0.0135
0.0145
0.0160
0.0180
0.0200
0.0210
0.0225
0.0240
0.0250
0.0260
0.0280
0.0292
0.0310
0.0320
0.0330
0.0350
0.0360
l2
Inch
1/16
1/16
1/16
1/16
1/16
1/16
5/64
5/64
5/64
5/64
5/64
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
3/16
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
l1
Inch
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
EDP #
or
e-Code
018697
018696
018695
018694
018693
018692
018691
018690
018689
018688
018687
018686
018685
018684
018683
018682
018681
018680
018679
018678
018677
018676
018675
018674
018673
018672
018671
018670
018669
018668
018667
018666
018665
018664
d1
Ø
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
d1
dec.
Inch
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
l2
Inch
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
l1
Inch
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
EDP #
or
e-Code
018663
018662
018661
018660
018659
018658
018657
018656
018655
018654
018653
018652
018651
018650
018649
018648
018647
018646
018645
018644
018643
018642
018641
018640
018639
018638
018637
018636
018635
018634
018633
018632
018631
018630
R18P - R15P
d1
Ø
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
d1
dec.
Inch
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
l2
Inch
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
l1
Inch
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
EDP #
or
e-Code
018629
018628
018627
018626
018625
018624
018623
018622
018621
018620
018619
018618
018617
018616
018615
018614
d1
Ø
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
018613
018612
018611
018610
018609
018608
018607
018606
018605
018604
018603
018602
018601
R15P
Ɣ Foret court
Ɣ Jobber Drill
Ŷ
Ɣ
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
3.1/16
3.1/16
l1
Inch
3.7/8
4“
4“
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
EDP #
or
e-Code
015601
015602
015603
015604
015605
015606
015607
015608
015609
015610
015611
015612
015613
015614
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
l1
Inch
4.1/2
4.5/8
4.3/4
4.3/4
4.7/8
4.7/8
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
EDP #
or
e-Code
015615
015616
015617
015618
015619
015620
015621
015622
015623
015624
015625
015626
99
R10PM
Ɣ Jobber Drill
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
mm
0.50
0.60
0.70
0.80
0.85
0.90
1.00
1.05
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.70
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.20
2.30
2.40
2.50
2.60
2.70
2.80
3.00
3.10
3.20
3.30
3.40
100
d1
dec.
Inch
0.0197
0.0236
0.0276
0.0315
0.0335
0.0354
0.0394
0.0413
0.0433
0.0453
0.0472
0.0492
0.0512
0.0531
0.0551
0.0571
0.0591
0.0610
0.0630
0.0669
0.0689
0.0709
0.0728
0.0748
0.0768
0.0787
0.0807
0.0827
0.0866
0.0906
0.0945
0.0984
0.1024
0.1063
0.1102
0.1181
0.1220
0.1260
0.1299
0.1339
l2
mm
5
8
11
13
16
16
17
17
19
19
22
22
22
22
22
22
22
22
22
25
25
25
25
25
25
25
29
29
32
32
35
35
37
37
38
41
41
41
44
44
l1
mm
22
29
32
35
38
38
41
41
44
44
48
48
48
48
48
48
48
48
48
51
51
51
51
51
51
51
54
54
57
57
60
60
64
64
67
70
70
70
73
73
EDP #
or
e-Code
031005
031006
031007
031008
031253
031009
031010
031255
031011
031256
031012
031257
031013
031258
031014
031259
031015
031260
031016
031017
031262
031018
031263
031019
031264
031020
031265
031021
031022
031023
031024
031025
031026
031027
031028
031030
031031
031032
031033
031034
d1
Ø
mm
3.50
3.60
3.70
3.80
3.90
4.00
4.10
4.20
4.30
4.40
4.50
4.60
4.70
4.80
4.90
5.00
5.10
5.20
5.30
5.40
5.50
5.60
5.70
5.80
5.90
6.00
6.10
6.20
6.30
6.40
6.50
6.60
6.70
6.80
6.90
7.00
7.10
7.20
7.30
7.40
d1
dec.
Inch
0.1378
0.1417
0.1457
0.1496
0.1535
0.1575
0.1614
0.1654
0.1693
0.1732
0.1772
0.1811
0.1850
0.1890
0.1929
0.1969
0.2008
0.2047
0.2087
0.2126
0.2165
0.2205
0.2244
0.2283
0.2323
0.2362
0.2402
0.2441
0.2480
0.2520
0.2559
0.2598
0.2638
0.2677
0.2717
0.2756
0.2795
0.2835
0.2874
0.2913
l2
mm
44
48
48
48
51
54
54
54
54
56
56
56
59
59
62
62
62
64
64
64
64
67
67
67
67
70
70
70
70
73
73
73
73
73
73
73
75
75
75
78
l1
mm
73
76
76
76
79
83
83
83
83
86
86
86
89
89
92
92
92
95
95
95
95
98
98
98
98
102
102
102
102
105
105
105
105
105
105
105
108
108
108
111
EDP #
or
e-Code
031035
031036
031037
031038
031039
031040
031041
031042
031043
031044
031045
031046
031047
031048
031049
031050
031051
031052
031053
031054
031055
031056
031057
031058
031059
031060
031061
031062
031063
031064
031065
031066
031067
031068
031069
031070
031071
031072
031073
031074
R10PM
d1
Ø
mm
7.50
7.60
7.70
7.80
7.90
8.00
8.10
8.20
8.30
8.40
8.50
8.60
8.70
8.80
8.90
9.00
9.10
9.20
9.30
9.40
d1
dec.
Inch
0.2953
0.2992
0.3031
0.3071
0.3110
0.3150
0.3189
0.3228
0.3268
0.3307
0.3346
0.3386
0.3425
0.3465
0.3504
0.3543
0.3583
0.3622
0.3661
0.3701
l2
mm
78
78
81
81
81
81
84
84
84
87
87
87
87
89
89
89
89
92
92
92
l1
mm
111
111
114
114
114
114
117
117
117
121
121
121
121
124
124
124
124
127
127
127
EDP #
or
e-Code
031075
031076
031077
031078
031079
031080
031081
031082
031083
031084
031085
031086
031087
031088
031089
031090
031091
031092
031093
031094
d1
Ø
mm
9.50
9.60
9.70
9.80
9.90
10.00
10.20
10.50
11.00
11.20
11.50
12.00
12.50
13.00
13.50
14.00
15.00
16.00
d1
dec.
Inch
0.3740
0.3780
0.3819
0.3858
0.3898
0.3937
0.4016
0.4134
0.4331
0.4409
0.4528
0.4724
0.4921
0.5118
0.5315
0.5512
0.5906
0.6299
l2
mm
92
95
95
95
95
95
98
98
103
106
106
111
114
114
122
122
132
132
l1
mm
127
130
130
130
130
130
133
133
140
143
143
149
152
152
168
168
181
181
EDP #
or
e-Code
031095
031096
031097
031098
031099
031100
031102
031105
031110
031112
031115
031120
031125
031130
031135
031140
031150
031160
101
R08
Ɣ Jobber Drill
Ɣ Automotive, tanged shank
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/8
30
29
9/64
24
5/32
20
19
18
11/64
17
16
15
13
3/16
11
10
13/64
3
7/32
1
15/64
1/4
F
G
17/64
I
J
9/32
19/64
5/16
O
102
d1
dec.
Inch
0.1250
0.1285
0.1360
0.1406
0.1520
0.1562
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1850
0.1875
0.1910
0.1935
0.2031
0.2130
0.2188
0.2280
0.2344
0.2500
0.2570
0.2610
0.2656
0.2720
0.2770
0.2812
0.2969
0.3125
0.3160
l2
Inch
1.5/8
1.5/8
1.3/4
1.3/4
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.1/2
2.1/2
2.5/8
2.5/8
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
3.1/16
3.3/16
3.3/16
l1
Inch
2.3/4
2.3/4
2.7/8
2.7/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4.1/8
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.3/8
4.1/2
4.1/2
EDP #
or
e-Code
017508
017630
017629
017509
017624
017510
017620
017619
017618
017511
017617
017616
017615
017613
017512
017611
017610
017513
017603
017514
017601
017515
017516
017706
017707
017517
017709
017710
017518
017519
017520
017715
d1
Ø
Inch
P
21/64
Q
R
11/32
S
23/64
U
3/8
W
25/64
X
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
d1
dec.
Inch
0.3230
0.3281
0.3320
0.3390
0.3438
0.3480
0.3594
0.3680
0.3750
0.3860
0.3906
0.3970
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
3.5/16
3.5/16
3.7/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
4.13/16
4.13/16
4.13/16
4.13/16
4.13/16
5.3/16
5.3/16
5.3/16
5.3/16
5.3/16
5.5/8
5.5/8
l1
Inch
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
5“
5“
5.1/8
5.1/8
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
6.5/8
6.5/8
6.5/8
6.5/8
6.5/8
7.1/8
7.1/8
7.1/8
7.1/8
7.1/8
7.5/8
7.5/8
EDP #
or
e-Code
017716
017521
017717
017718
017522
017719
017523
017721
017524
017723
017525
017724
017526
017527
017528
017529
017530
017531
017532
017533
017534
017535
017536
017537
017538
017539
017540
017541
017542
017543
017544
R10H
Ɣ Jobber Drill
Ɣ High Helix
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
d1dec.
Inch
0.0312
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
1/2
3/4
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
l1
Inch
1.3/8
1.3/4
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
EDP #
or e-Code
010502
010503
010504
010505
010506
010507
010508
010509
010510
010511
010512
010513
010514
010515
010516
010517
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or e-Code
010518
010519
010520
010521
010522
010523
010524
010525
010526
010527
010528
010529
010530
010531
010532
103
R18H
Ɣ Jobber Drill
Ɣ High Helix
Foret court
Ŷ
Ɣ
d1
Ø
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
104
d1
dec.
Inch
0.0135
0.0145
0.0160
0.0180
0.0200
0.0210
0.0225
0.0240
0.0250
0.0260
0.0280
0.0292
0.0310
0.0320
0.0330
0.0350
0.0360
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
l2
Inch
1/8
1/8
3/16
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
l1
Inch
3/4
3/4
7/8
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
EDP #
or
e-Code
018580
018579
018578
018577
018576
018575
018574
018573
018572
018571
018570
018569
018568
018567
018566
018565
018564
018563
018562
018561
018560
018559
018558
018557
018556
018555
018554
018553
018552
018551
018550
018549
018548
018547
018546
018545
018544
018543
018542
018541
018540
018539
d1
Ø
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
018538
018537
018536
018535
018534
018533
018532
018531
018530
018529
018528
018527
018526
018525
018524
018523
018522
018521
018520
018519
018518
018517
018516
018515
018514
018513
018512
018511
018510
018509
018508
018507
018506
018505
018504
018503
018502
018501
R18S
Ɣ Jobber Drill
Ɣ Slow Helix
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
d1
dec.
Inch
0.0135
0.0145
0.0160
0.0180
0.0200
0.0210
0.0225
0.0240
0.0250
0.0260
0.0280
0.0292
0.0310
0.0320
0.0330
0.0350
0.0360
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
l2
Inch
1/8
1/8
3/16
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
l1
Inch
3/4
3/4
7/8
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
EDP #
or
e-Code
018780
018779
018778
018777
018776
018775
018774
018773
018772
018771
018770
018769
018768
018767
018766
018765
018764
018763
018762
018761
018760
018759
018758
018757
018756
018755
018754
018753
018752
018751
018750
018749
018748
018747
018746
018745
018744
018743
018742
018741
018740
018739
d1
Ø
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
018738
018737
018736
018735
018734
018733
018732
018731
018730
018729
018728
018727
018726
018725
018724
018723
018722
018721
018720
018719
018718
018717
018716
018715
018714
018713
018712
018711
018710
018709
018708
018707
018706
018705
018704
018703
018702
018701
105
R10S - L10
Ɣ Jobber Drill
Ɣ Slow Helix
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
EDP #
or
e-Code
010704
010705
010706
010707
010708
010709
010710
010711
010712
010713
010714
010715
010716
010717
l1
Inch
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
Ɣ Jobber Drill
Ɣ Left Hand
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
Ɣ Foret court
EDP #
or
e-Code
010718
010719
010720
010721
010722
010723
010724
010725
010726
010727
010728
010729
010730
010731
010732
L10
Ŷ
d1
Ø
Inch
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
106
Ɣ
d1
dec.
Inch
0.0312
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
1/2
3/4
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
l1
Inch
1.3/8
1.3/4
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
EDP #
or
e-Code
010902
010903
010904
010905
010906
010907
010908
010909
010910
010911
010912
010913
010914
010915
010916
010917
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
2.15/16
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4.7/8
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
010918
010919
010920
010921
010922
010923
010924
010925
010926
010927
010928
010929
010930
010931
010932
L18
Ɣ Jobber Drill
Ɣ Left Hand
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
48
44
43
42
41
40
39
38
37
36
35
34
33
32
31
d1
dec.
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
l2
Inch
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
l1
Inch
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
EDP #
or
e-Code
018960
018959
018958
018957
018956
018955
018954
018953
018952
018951
018950
018949
018948
018947
018946
018945
018944
018943
018942
018941
018940
018939
018938
018937
018936
018935
018934
018933
018932
018931
d1
Ø
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
l1
Inch
2.3/4
2.7/8
2.7/8
3“
3“
3“
3.1/8
3.1/8
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
EDP #
or
e-Code
018930
018929
018928
018927
018926
018925
018924
018923
018922
018921
018920
018919
018918
018917
018916
018915
018914
018913
018912
018911
018910
018909
018908
018907
018906
018905
018904
018903
018902
018901
107
HSS Taper Length Drills
ProdA578
Icon1
Style:
Tool Material:
A916
QC91CO
QC91COM
QC91V
Photo
AMG Chart below.
example: 125 F
125 = SFM
F = Alpha Code to find your Feed Rate
Ŷ
Ɣ
Finish/Coating:
Direction of Cut:
2
Depth of Cut:
Tool Length:
Shank:
Helix:
Point Angle:
Point Style:
108
3
Hardness
HB
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
Standard:
Icon2
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeSurface
Dim
Cata- 112-113 114-115
110-111
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
M11
Ɣ161G
M12
Ɣ138G
M13
Ŷ115F
M14
Ŷ115F
M15
Ŷ69D
M16
Ŷ56D
M17
M18
M21
Ɣ56C
M22
Ŷ30E
M23
Ɣ36B
M24
M31
Ŷ131G
M32
Ŷ118F
M33
Ŷ82F
M34
Ŷ59D
M41
Ɣ82F
M42
Ɣ59D
M43
Ɣ26D
M51
M52
M53
M61
M62
M63
Ɣ157H
M64
Ɣ138H
M71
M72
M73
M74
Ŷ138H
M81
M82
M83
M91
M101
116
Ɣ115F
Ɣ98F
Ŷ82E
Ŷ82E
Ŷ49C
Ŷ39C
Ɣ115J
Ɣ98H
Ɣ89G
Ɣ79F
Ŷ56E
Ŷ33D
Ŷ125F
Ŷ75F
Ŷ79H
Ŷ75F
Ɣ59D
Ɣ49C
Ŷ23E
Ɣ30B
Ɣ72E
Ɣ36G
Ɣ49C
Ɣ115H
Ɣ66F
Ɣ66D
Ɣ115H
Ɣ92D
Ɣ72E
Ŷ56E
Ŷ92F
Ŷ66D
Ŷ36C
Ɣ49G
Ŷ23E
Ɣ20B
Ɣ125H
Ɣ131F
Ɣ84H
Ɣ69F
Ɣ108J
Ɣ98I
Ɣ98H
Ɣ89F
Ŷ184H
Ŷ98H
Ɣ105F
Ɣ66D
Ɣ85E
Ɣ59E
Ɣ43C
Ŷ59E
Ŷ43C
Ŷ20C
Ɣ213F
Ɣ230F
Ɣ112G
Ɣ98G
Ɣ230E
Ŷ148N
Ɣ131N
Ɣ98G
Ɣ180H
Ɣ131F
Ɣ20C
Ɣ66H
Ŷ112I
Ŷ98H
Ŷ98H
Ŷ440H
Ŷ384H
Ŷ344H
HSS Taper Length Drills (con‘t)
QC91
QC91M
QC91P
QC91PM
M51CO
M52CO
R53OH
R51OH
EZ51P
R51K
R51
R52
R55
5ATL
R09
R51FS
R52FS
R55FS
133
134-135
QC91G
QC21GM
117, 120 118, 121 119, 122 123-124
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
125
125
Ŷ115F
Ŷ69F
Ŷ75H
Ŷ69F
Ɣ56D
Ŷ98F
Ŷ59F
Ŷ69H
Ŷ59F
Ɣ46D
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ɣ89G
Ɣ82G
Ɣ66E
Ɣ52E
Ɣ30D
Ɣ20B
Ŷ154F
Ŷ75F
Ŷ98H
Ŷ85F
Ɣ59D
Ɣ30B
Ŷ154F
Ŷ75F
Ŷ98H
Ŷ85F
Ɣ59D
Ɣ30B
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ɣ89G
Ɣ82G
Ɣ66E
Ɣ52E
Ɣ30D
Ɣ20B
Ɣ89G
Ɣ82G
Ɣ66E
Ɣ52E
Ɣ30D
Ɣ20B
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ɣ105H
Ɣ59F
Ɣ59D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ33D
Ɣ20F
Ɣ13B
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ33D
Ɣ20F
Ɣ13B
Ɣ33D
Ɣ20F
Ɣ13B
Ɣ89H
Ɣ49F
Ɣ49D
Ŷ151H
Ŷ79H
Ɣ85F
Ŷ151H
Ŷ79H
Ɣ79F
Ŷ151H
Ŷ79H
Ɣ79F
Ŷ151H
Ŷ79H
Ɣ79F
Ɣ89H
Ɣ49F
Ɣ89H
Ɣ49F
Ɣ89H
Ɣ49F
Ɣ49F
Ɣ49F
Ɣ49F
Ɣ49F
Ŷ89I
Ŷ85H
Ŷ79H
Ɣ89I
Ɣ79H
Ɣ75H
Ɣ92H
Ɣ69E
Ɣ49D
Ɣ43D
Ɣ56E
Ɣ30C
Ɣ13A
Ɣ26F
Ɣ13D
Ɣ10A
Ɣ98E
Ɣ105H
Ɣ89G
Ɣ52E
Ɣ105I
Ɣ89H
Ɣ89G
Ɣ82E
Ɣ115I
Ɣ85G
Ɣ39E
Ɣ10A
Ɣ92H
Ɣ69E
Ɣ49D
Ɣ43D
Ɣ56E
Ɣ30C
Ɣ13A
Ɣ26F
Ɣ13D
Ɣ10A
Ɣ98E
Ɣ105H
Ɣ89G
Ɣ52E
Ɣ105I
Ɣ89H
Ɣ89G
Ɣ82E
Ɣ115I
Ɣ85G
Ɣ39E
Ɣ10A
Ŷ151H
Ŷ79H
Ɣ79F
Ɣ95H
Ɣ49F
Ɣ92H
Ɣ69E
Ɣ49D
Ɣ43D
Ɣ56E
Ɣ30C
Ɣ13A
Ɣ26F
Ɣ13D
Ɣ10A
Ɣ98E
Ɣ105H
Ɣ89G
Ɣ52E
Ɣ105I
Ɣ89H
Ɣ89G
Ɣ82E
Ɣ115I
Ɣ85G
Ɣ39E
Ɣ10A
Ɣ121H
Ɣ66F
Ɣ66D
Ɣ49D
Ŷ180H
Ŷ112H
Ɣ134F
Ɣ75D
Ɣ112H
Ɣ98F
Ɣ26D
Ɣ75F
Ɣ30B
Ɣ89H
Ɣ46F
Ɣ49D
Ŷ171H
Ŷ89H
Ɣ95F
Ɣ59D
Ɣ121H
Ɣ66F
Ɣ66D
Ɣ49D
Ŷ180H
Ŷ112H
Ɣ134F
Ɣ75D
Ɣ112H
Ɣ98F
Ɣ26D
Ɣ75F
Ɣ30B
Ɣ59H
Ŷ98I
Ŷ89H
Ŷ89H
Ɣ89I
Ɣ79H
Ɣ79H
Ŷ400H
Ŷ351H
Ɣ351H
Ɣ325H
Ŷ315H
Ɣ276H
Ŷ125I
Ŷ184H
Ŷ180H
Ŷ184H
Ŷ420H
Ŷ374H
Ŷ298H
Ŷ364H
126
Ŷ351H
Ŷ325H
Ŷ276H
127
128-130 131-132
Ɣ89H
Ɣ49F
Ɣ49F
Ɣ89I
Ɣ79H
Ɣ75H
Ŷ89I
Ŷ348H
Ŷ325H
Ŷ276H
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
109
A578
Ɣ Foret PFXsérie longue
Ɣ PFX long series drill
Ɣ Broca PFX - serie larga
Ŷ
Ɣ
d1Øh8
mm
1.00
1.50
2.00
2.50
3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
3.80
3.90
4.00
4.10
4.20
4.30
4.40
4.50
4.60
4.70
4.80
4.90
5.00
5.10
5.20
5.30
5.40
5.50
5.60
5.70
110
d1dec.
Inch
0.0393
0.0590
0.0787
0.0984
0.1181
0.1220
0.1259
0.1299
0.1338
0.1377
0.1417
0.1456
0.1496
0.1535
0.1574
0.1614
0.1653
0.1692
0.1732
0.1771
0.1811
0.1850
0.1889
0.1929
0.1968
0.2007
0.2047
0.2086
0.2125
0.2165
0.2204
0.2244
l2
mm
33
45
56
62
66
69
69
69
73
73
73
73
78
78
78
78
78
82
82
82
82
82
87
87
87
87
87
87
91
91
91
91
l1
mm
56
70
85
95
100
106
106
106
112
112
112
112
119
119
119
119
119
126
126
126
126
126
132
132
132
132
132
132
139
139
139
139
Stock #
0613832
0613849
0613856
0613863
0279229
0587027
0587034
0279236
0279243
0279250
0587041
0587058
0587065
0587072
0279267
0587089
0279274
0587096
0587102
0279281
0587119
0587126
0587133
0587140
0279298
0587157
0587164
0587171
0587188
0279304
0587195
0587201
EDP #
or e-Code
A5781.0
A5781.5
A5782.0
A5782.5
A5783.0
A5783.1
A5783.2
A5783.3
A5783.4
A5783.5
A5783.6
A5783.7
A5783.8
A5783.9
A5784.0
A5784.1
A5784.2
A5784.3
A5784.4
A5784.5
A5784.6
A5784.7
A5784.8
A5784.9
A5785.0
A5785.1
A5785.2
A5785.3
A5785.4
A5785.5
A5785.6
A5785.7
d1Øh8
mm
5.80
5.90
6.00
6.10
6.20
6.30
6.40
6.50
6.60
6.70
6.80
6.90
7.00
7.10
7.20
7.30
7.40
7.50
7.60
7.70
7.80
7.90
8.00
8.10
8.20
8.30
8.40
8.50
8.60
8.70
8.80
8.90
d1dec.
Inch
0.2283
0.2322
0.2362
0.2401
0.2440
0.2480
0.2519
0.2559
0.2598
0.2637
0.2677
0.2716
0.2755
0.2795
0.2834
0.2874
0.2913
0.2952
0.2992
0.3031
0.3070
0.3110
0.3149
0.3188
0.3228
0.3267
0.3307
0.3346
0.3385
0.3425
0.3464
0.3503
l2
mm
91
91
91
97
97
97
97
97
97
97
102
102
102
102
102
102
102
102
109
109
109
109
109
109
109
109
109
109
115
115
115
115
l1
mm
139
139
139
148
148
148
148
148
148
148
156
156
156
156
156
156
156
156
165
165
165
165
165
165
165
165
165
165
175
175
175
175
Stock #
0587218
0587225
0279311
0587232
0587249
0587256
0587263
0279328
0279335
0587270
0279342
0587287
0279359
0587294
0587300
0587317
0587324
0279366
0279373
0587331
0587348
0587355
0279380
0587362
0587379
0587386
0587393
0279397
0587409
0587416
0587423
0587430
EDP #
or e-Code
A5785.8
A5785.9
A5786.0
A5786.1
A5786.2
A5786.3
A5786.4
A5786.5
A5786.6
A5786.7
A5786.8
A5786.9
A5787.0
A5787.1
A5787.2
A5787.3
A5787.4
A5787.5
A5787.6
A5787.7
A5787.8
A5787.9
A5788.0
A5788.1
A5788.2
A5788.3
A5788.4
A5788.5
A5788.6
A5788.7
A5788.8
A5788.9
A578
d1Øh8
mm
9.00
9.10
9.20
9.30
9.40
9.50
9.60
9.70
9.80
9.90
10.00
10.20
10.30
10.40
10.50
10.80
11.00
11.20
1)
d1dec.
Inch
0.3543
0.3582
0.3622
0.3661
0.3700
0.3740
0.3779
0.3818
0.3858
0.3897
0.3937
0.4015
0.4055
0.4094
0.4133
0.4251
0.4330
0.4409
l2
mm
115
115
115
115
115
115
121
121
121
121
139
139
139
139
139
150
150
150
l1
mm
175
175
175
175
175
175
184
184
184
184
184
184
184
184
184
195
195
195
Stock #
0279403
0587447
0587454
0587461
0587478
0279410
0587485
0587492
0587508
0587515
0279427
0279434
0586877
0586884
0279441
0586891
0279458
0586907
EDP #
or e-Code
A5789.0
A5789.1
A5789.2
A5789.3
A5789.4
A5789.5
A5789.6
A5789.7
A5789.8
A5789.9
A57810.0
A57810.2
A57810.3
A57810.4
A57810.5
A57810.8
A57811.0
A57811.2
1)
1)
1)
d1Øh8
mm
11.50
11.80
12.00
12.20
12.50
12.80
13.00
13.50
14.00
14.50
15.00
15.50
16.00
d1decimal
Inch
0.4527
0.4646
0.4724
0.4803
0.4921
0.5039
0.5118
0.5314
0.5511
0.5708
0.5905
0.6102
0.6299
l2
mm
150
150
160
160
160
160
160
169
169
172
172
179
179
l1
mm
195
195
205
205
205
205
205
214
214
220
220
227
227
Stock #
0279465
0586914
0279472
0586921
0586938
0586945
0586952
0586969
0586976
0586983
0586990
0587003
0587010
EDP #
or e-Code
A57811.5 1)
A57811.8 1)
A57812.0 1)
A57812.2 1)
A57812.5 1)
A57812.8 1)
A57813.0 1)
A57813.5 1)
A57814.0 1)
A57814.5 1)
A57815.0 1)
A57815.5 1)
A57816.0 1)
1)
1)
1)
1)
1)
Flute Lengths Longer than Standard
111
A916
Ɣ PFX long series drill
Ɣ Foret PFXsérie longue
Ɣ Broca PFX - serie larga
Ŷ
Ɣ
d1
Øh8
Inch
1/16
5/64
3/32
7/64
1/8
9/64
112
d1
Øh8
mm
1.00
1.10
1.20
1.30
1.40
1.50
1.59
1.60
1.70
1.80
1.90
1.98
2.00
2.10
2.20
2.30
2.38
2.40
2.50
2.60
2.70
2.78
2.80
2.90
3.00
3.10
3.18
3.20
3.30
3.40
3.50
3.57
3.60
3.70
3.80
3.90
d1
dec.
Inch
0.0393
0.0433
0.0472
0.0511
0.0551
0.0590
0.0625
0.0629
0.0669
0.0708
0.0748
0.0779
0.0787
0.0826
0.0866
0.0905
0.0937
0.0944
0.0984
0.1023
0.1062
0.1094
0.1102
0.1141
0.1181
0.1220
0.1251
0.1259
0.1299
0.1338
0.1377
0.1405
0.1417
0.1456
0.1496
0.1535
l2
mm
33
37
41
41
45
45
50
50
50
53
53
56
56
56
59
59
62
62
62
62
66
66
66
66
66
69
69
69
69
73
73
73
73
73
78
78
l1
mm
56
60
65
65
70
70
76
76
76
80
80
85
85
85
90
90
95
95
95
95
100
100
100
100
100
106
106
106
106
112
112
112
112
112
119
119
Stock #
0146330
0146347
0146354
0146361
0146378
0146385
0171752
0146392
0146408
0146415
0146422
0171769
0146439
0146446
0146453
0146460
0171776
0146477
0146484
0146491
0146507
0171783
0146514
0146521
0146538
0146545
0171790
0146552
0146569
0146576
0146583
0171806
0146590
0146606
0146613
0146620
EDP #
or
e-Code
A9161.0
A9161.1
A9161.2
A9161.3
A9161.4
A9161.5
A9161/16
A9161.6
A9161.7
A9161.8
A9161.9
A9165/64
A9162.0
A9162.1
A9162.2
A9162.3
A9163/32
A9162.4
A9162.5
A9162.6
A9162.7
A9167/64
A9162.8
A9162.9
A9163.0
A9163.1
A9161/8
A9163.2
A9163.3
A9163.4
A9163.5
A9169/64
A9163.6
A9163.7
A9163.8
A9163.9
d1
Øh8
Inch
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
d1
Øh8
mm
3.97
4.00
4.10
4.20
4.30
4.37
4.40
4.50
4.60
4.70
4.76
4.80
4.90
5.00
5.10
5.16
5.20
5.30
5.40
5.50
5.56
5.60
5.70
5.80
5.90
5.95
6.00
6.10
6.20
6.30
6.35
6.40
6.50
6.60
6.70
6.75
d1
dec.
Inch
0.1562
0.1574
0.1614
0.1653
0.1692
0.1720
0.1732
0.1771
0.1811
0.1850
0.1874
0.1889
0.1929
0.1968
0.2007
0.2031
0.2047
0.2086
0.2125
0.2165
0.2188
0.2204
0.2244
0.2283
0.2322
0.2342
0.2362
0.2401
0.2440
0.2480
0.2500
0.2519
0.2559
0.2598
0.2637
0.2657
l2
mm
78
78
78
78
82
82
82
82
82
82
87
87
87
87
87
87
87
87
91
91
91
91
91
91
91
91
91
97
97
97
97
97
97
97
97
102
l1
mm
119
119
119
119
126
126
126
126
126
126
132
132
132
132
132
132
132
132
139
139
139
139
139
139
139
139
139
148
148
148
148
148
148
148
148
156
Stock #
0171813
0146637
0146644
0146651
0146668
0171820
0146675
0146682
0146699
0146705
0171837
0146712
0146729
0146736
0146743
0171844
0146750
0146767
0146774
0146781
0171851
0146798
0146804
0146811
0146828
0171868
0146835
0146842
0146859
0146866
0171875
0146873
0146880
0146897
0146903
0171882
EDP #
or
e-Code
A9165/32
A9164.0
A9164.1
A9164.2
A9164.3
A91611/64
A9164.4
A9164.5
A9164.6
A9164.7
A9163/16
A9164.8
A9164.9
A9165.0
A9165.1
A91613/64
A9165.2
A9165.3
A9165.4
A9165.5
A9167/32
A9165.6
A9165.7
A9165.8
A9165.9
A91615/64
A9166.0
A9166.1
A9166.2
A9166.3
A9161/4
A9166.4
A9166.5
A9166.6
A9166.7
A91617/64
A916
d1
Øh8
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
d1
Øh8
mm
6.80
6.90
7.00
7.10
7.14
7.20
7.30
7.40
7.50
7.54
7.60
7.70
7.80
7.90
7.94
8.00
8.10
8.20
8.30
8.33
8.40
8.50
8.60
8.70
8.73
8.80
8.90
9.00
9.10
9.13
9.20
9.30
9.40
9.50
9.53
9.60
9.70
9.80
9.90
9.92
10.00
10.20
10.30
10.32
d1
dec.
Inch
0.2677
0.2716
0.2755
0.2795
0.2811
0.2834
0.2874
0.2913
0.2952
0.2968
0.2992
0.3031
0.3070
0.3110
0.3125
0.3149
0.3188
0.3228
0.3267
0.3279
0.3307
0.3346
0.3385
0.3425
0.3437
0.3464
0.3503
0.3543
0.3582
0.3594
0.3622
0.3661
0.3700
0.3740
0.3751
0.3779
0.3818
0.3858
0.3897
0.3905
0.3937
0.4015
0.4055
0.4062
l2
mm
102
102
102
102
102
102
102
102
102
109
109
109
109
109
109
109
109
109
109
109
109
109
115
115
115
115
115
115
115
115
115
115
115
115
139
139
139
139
139
139
139
139
139
139
l1
mm
156
156
156
156
156
156
156
156
156
165
165
165
165
165
165
165
165
165
165
165
165
165
175
175
175
175
175
175
175
175
175
175
175
175
184
184
184
184
184
184
184
184
184
184
Stock #
0146910
0146927
0146934
0146941
0171899
0146958
0146965
0146972
0146989
0171905
0146996
0147009
0147016
0147023
0171912
0147030
0147047
0147061
0147078
0171929
0147085
0147092
0147108
0147115
0171936
0147122
0147139
0147146
0147153
0171943
0147160
0147177
0147184
0147191
0171950
0147207
0147214
0147221
0147238
0171967
0147245
0147252
0171974
0171981
EDP #
or
e-Code
A9166.8
A9166.9
A9167.0
A9167.1
A9169/32
A9167.2
A9167.3
A9167.4
A9167.5
A91619/64
A9167.6
A9167.7
A9167.8
A9167.9
A9165/16
A9168.0
A9168.1
A9168.2
A9168.3
A91621/64
A9168.4
A9168.5
A9168.6
A9168.7
A91611/32
A9168.8
A9168.9
A9169.0
A9169.1
A91623/64
A9169.2
A9169.3
A9169.4
A9169.5
A9163/8
A9169.6
A9169.7
A9169.8
A9169.9
A91625/64
A91610.0
A91610.2
A91610.3
A91613/32
d1
Øh8
Inch
l1
mm
184
184
195
195
195
195
195
195
195
195
205
205
205
205
205
205
205
205
205
214
214
214
220
220
220
220
227
227
255
227
235
235
235
241
241
241
257
Stock #
0171998
0147269
0172001
0147276
0147283
0172018
0147290
0147306
0172025
0147313
0172032
0147320
0147337
0172049
0147344
0172056
0147351
0147368
0588376
0588291
0588208
0588215
0588420
0588222
0588383
0588239
0588321
0588246
0588413
0588253
0588260
0588345
0588277
0588192
0588284
0588390
0588307
EDP #
or
e-Code
A91610.4
A91610.5
A91627/64
A91610.8
A91611.0
A9167/16
A91611.2
A91611.5
A91629/64
A91611.8
A91615/32
A91612.0
A91612.2
A91631/64
A91612.5
A9161/2
A91612.8
A91613.0
A91633/64
A91617/32
A91613.5
A91614.0
A9169/16
A91614.5
A91637/64
A91615.0
A91619/32
A91615.5
A9165/8
A91616.0
A91616.5
A91621/32
A91617.0
A91611/16
A91617.5
A91645/64
A91618.0
23/32 18.27 0.7188
210 257
0588352
A91623/32
47/64 18.65 0.7344
210 257
0588406
A91647/64
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
9/16
37/64
19/32
5/8
21/32
11/16
1)
1)
45/64
1)
d1
Øh8
mm
10.40
10.50
10.72
10.80
11.00
11.11
11.20
11.50
11.51
11.80
11.91
12.00
12.20
12.30
12.50
12.70
12.80
13.00
13.10
13.49
13.50
14.00
14.29
14.50
14.68
15.00
15.08
15.50
15.88
16.00
16.50
16.67
17.00
17.46
17.50
17.86
18.00
d1
dec.
Inch
0.4094
0.4133
0.4220
0.4251
0.4330
0.4374
0.4409
0.4527
0.4531
0.4645
0.4688
0.4724
0.4803
0.4842
0.4921
0.5000
0.5039
0.5118
0.5156
0.5312
0.5314
0.5511
0.5625
0.5708
0.5781
0.5905
0.5938
0.6102
0.6250
0.6299
0.6496
0.6562
0.6693
0.6875
0.6890
0.7031
0.7087
l2
mm
139
139
150
150
150
150
150
150
150
150
160
160
160
160
160
160
160
160
160
169
169
169
172
172
172
172
179
179
179
179
188
188
188
195
195
195
195
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
2)
1)
1)
1)
2)
1)
1)
1)
1)
2)
1)
19.00 0.7480
1)
1)
210 264
0588314
A91619.0
1)
2)
3/4
19.05 0.75
215 264
0588369
A9163/4
20.00 0.7874
220 264
0588338
A91620.0
1)
2)
1)
2)
1)
2)
Flute Lengths Longer than Standard
Overall Lengths Longer than Standard
113
QC91CO
Ɣ Taper length drill
Ɣ Foret serie longue
Ɣ Broca de mango conico- Serie Larga
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
114
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
l2
Inch
1.3/4
2“
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
l1
Inch
3“
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
EDP #
or
e-Code
057804
053952
053951
053950
053949
053948
057805
053947
053946
053945
053944
053943
053942
057806
053941
053940
053939
053938
053937
053936
057807
053935
053934
053933
053932
053931
057808
053930
053929
053928
057809
053927
053926
053925
053924
053923
057810
053922
053921
053920
053919
053918
d1
Ø
Inch
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
l1
Inch
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
EDP #
or
e-Code
057811
053917
053916
053915
053914
053913
057812
053912
053911
053910
053909
053908
053907
057813
053906
053905
053904
053903
057814
053902
053901
057815
057816
057817
057818
057819
057820
057821
057822
057823
057824
057825
057826
057827
057828
057829
057830
057831
057832
QC91COM
Ŷ
Ɣ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
7.00
7.50
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
0.2756
0.2953
l2
mm
45
56
62
66
73
78
82
87
87
91
91
91
97
102
102
102
l1
mm
70
85
95
100
112
119
126
132
132
139
139
139
148
156
156
156
EDP #
or
e-Code
050415
050420
050425
050430
050435
050440
050445
050450
050452
050455
050456
050460
050465
050468
050470
050475
d1
Ø
mm
8.00
8.20
8.50
8.60
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
d1
dec.
Inch
0.3150
0.3228
0.3346
0.3386
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
l2
mm
109
109
109
115
115
115
121
121
128
128
134
134
134
l1
mm
165
165
165
175
175
175
184
184
195
195
205
205
205
EDP #
or
e-Code
050480
050482
050485
050486
050490
050495
050500
050505
050510
050515
050520
050525
050530
115
QC91V
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
116
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
l2
Inch
1.3/4
2“
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
l1
Inch
3“
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
EDP #
or
e-Code
081804
080852
080851
080850
080849
080848
081805
080847
080846
080845
080844
080843
080842
081806
080841
080840
080839
080838
080837
080836
081807
080835
080834
080833
080832
080831
081808
080830
080829
080828
081809
080827
080826
080825
080824
080823
081810
080822
080821
080820
080819
080818
d1
Ø
Inch
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
l1
Inch
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
EDP #
or
e-Code
081811
080817
080816
080815
080814
080813
081812
080812
080811
080810
080809
080808
080807
081813
080806
080805
080804
080803
081814
080802
080801
081815
081816
081817
081818
081819
081820
081821
081822
081823
081824
081825
081826
081827
081828
081829
081830
081831
081832
QC91G
Ŷ
Ɣ
d1
Ø Inch
d1 dec.
Inch
l2
Inch
l1
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
1.3/4
2“
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3.3/8
3.3/8
3.3/8
3“
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
EDP #
or eCode
055904
050952
050951
050950
050949
050948
055905
050947
050946
050945
050944
050943
050942
055906
050941
050940
050939
050938
050937
050936
055907
050935
050934
050933
050932
050931
055908
050930
050929
050928
055909
050927
050926
050925
050924
050923
055910
050922
050921
050920
d1
Ø Inch
d1 dec.
Inch
l2
Inch
l1
Inch
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
4“
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
EDP #
or eCode
050919
050918
055911
050917
050916
050915
050914
050913
055912
050912
050911
050910
050909
050908
050907
055913
050906
050905
050904
050903
055914
050902
050901
055915
055916
055917
055918
055919
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
055920
055921
055922
055923
055924
055925
055926
055927
055928
055929
055930
055931
055932
117
QC91
Ŷ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
118
Ɣ
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
l2
Inch
1.3/4
2“
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
l1
Inch
3“
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
EDP #
or
e-Code
055804
050852
050851
050850
050849
050848
055805
050847
050846
050845
050844
050843
050842
055806
050841
050840
050839
050838
050837
050836
055807
050835
050834
050833
050832
050831
055808
050830
050829
050828
055809
050827
050826
050825
050824
050823
055810
050822
050821
050820
050819
050818
d1
Ø
Inch
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
l1
Inch
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
EDP #
or
e-Code
055811
050817
050816
050815
050814
050813
055812
050812
050811
050810
050809
050808
050807
055813
050806
050805
050804
050803
055814
050802
050801
055815
055816
055817
055818
055819
055820
055821
055822
055823
055824
055825
055826
055827
055828
055829
055830
055831
055832
QC91P
Ŷ
Ɣ
d1
Ø
Inch
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
d1
dec.
Inch
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1250
0.1285
0.1360
0.1405
0.1406
0.1440
0.1470
0.1495
l2
Inch
1.3/4
2“
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
l1
Inch
3“
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
EDP #
or
e-Code
057904
059452
059451
059450
059449
059448
057905
059447
059446
059445
059444
059443
059442
057906
059441
059440
059439
059438
059437
059436
057907
059435
059434
059433
059432
059431
057908
059430
059429
059428
057909
059427
059426
059425
d1
Ø
Inch
24
23
5/32
22
21
20
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
15/64
1/4
17/64
9/32
19/64
d1
dec.
Inch
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1875
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2344
0.2500
0.2656
0.2812
0.2969
l2
Inch
3“
3“
3“
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
4“
l1
Inch
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
EDP #
or
e-Code
059424
059423
057910
059422
059421
059420
059419
059418
057911
059417
059416
059415
059414
059413
057912
059412
059411
059410
059409
059408
059407
057913
059406
059405
059404
059403
057914
059402
059401
057915
057916
057917
057918
057919
119
QC91P - QC91GM
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
d1
dec.
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
l2
Inch
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
l1
Inch
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
EDP #
or
e-Code
057920
057921
057922
057923
057924
057925
057926
057927
057928
057929
057930
057931
d1
Ø
Inch
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
d1
dec.
Inch
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
5.1/8
5.1/8
5.3/8
5.3/8
l1
Inch
7.3/4
8“
8“
8.1/4
8.1/4
8.3/4
8.3/4
8.3/4
8.3/4
9“
9“
9.1/4
9.1/4
EDP #
or
e-Code
057932
057933
057934
057935
057936
057937
057938
057939
057940
057941
057942
057943
057944
QC91GM
Ŷ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
120
Ɣ
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
l2
mm
45
56
62
66
73
78
82
87
87
91
91
91
97
102
l1
mm
70
85
95
100
112
119
126
132
132
139
139
139
148
156
EDP #
or
e-Code
050215
050220
050225
050230
050235
050240
050245
050250
050252
050255
050256
050260
050265
050268
d1
Ø
mm
7.00
7.50
8.00
8.20
8.50
8.60
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
d1
dec.
Inch
0.2756
0.2953
0.3150
0.3228
0.3346
0.3386
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
l2
mm
102
102
109
109
109
115
115
115
121
121
128
128
134
134
134
l1
mm
156
156
165
165
165
175
175
175
184
184
195
195
205
205
205
EDP #
or
e-Code
050270
050275
050280
050282
050285
050286
050290
050295
050300
050305
050310
050315
050320
050325
050330
QC91M
Ŷ
Ɣ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
l2
mm
45
56
62
66
73
78
82
87
87
91
91
91
97
102
l1
mm
70
85
95
100
112
119
126
132
132
139
139
139
148
156
EDP #
or
e-Code
050615
050620
050625
050630
050635
050640
050645
050650
050652
050655
050656
050660
050665
050668
d1
Ø
mm
7.00
7.50
8.00
8.20
8.50
8.60
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
d1
dec.
Inch
0.2756
0.2953
0.3150
0.3228
0.3346
0.3386
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
l2
mm
102
102
109
109
109
115
115
115
121
121
128
128
134
134
134
l1
mm
156
156
165
165
165
175
175
175
184
184
195
195
205
205
205
EDP #
or
e-Code
050670
050675
050680
050682
050685
050686
050690
050695
050700
050705
050710
050715
050720
050725
050730
121
QC91PM
Ŷ
Ɣ
d1
Ø
mm
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.20
5.50
5.60
6.00
6.50
6.80
7.00
7.50
8.00
8.20
8.50
8.60
122
d1
dec.
Inch
0.0591
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2047
0.2165
0.2205
0.2362
0.2559
0.2677
0.2756
0.2953
0.3150
0.3228
0.3346
0.3386
l2
mm
45
56
62
66
73
78
82
87
87
91
91
91
97
102
102
102
109
109
109
115
l1
mm
70
85
95
100
112
119
126
132
132
139
139
139
148
156
156
156
165
165
165
175
EDP #
or
e-Code
050015
050020
050025
050030
050035
050040
050045
050050
050052
050055
050056
050060
050065
050068
050070
050075
050080
050082
050085
050086
d1
Ø
mm
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
d1
dec.
Inch
0.3543
0.3740
0.3937
0.4134
0.4331
0.4528
0.4724
0.4921
0.5118
0.5315
0.5512
0.5709
0.5906
0.6102
0.6299
0.6496
0.6693
0.6890
l2
mm
115
115
121
121
128
128
134
134
134
140
140
144
144
149
149
154
154
158
l1
mm
175
175
184
184
195
195
205
205
205
214
214
220
220
227
227
235
235
241
EDP #
or
e-Code
050090
050095
050100
050105
050110
050115
050120
050125
050130
050135
050140
050145
050150
050155
050160
050165
050170
050175
M51CO
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
1)
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
l2
Inch
1.3/4
2“
2.1/4
2.1/2
2.3/4
3“
3“
3.3/8
3.3/8
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
4.3/4
4.3/4
4.7/8
l1
Inch
3“
3.3/4
4.1/4
4.5/8
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
8“
8“
8.1/4
EDP #
or
e-Code
051304
051305
051306
051307
051308
051309
051310
051311
051312
051313
051314
051315
051316
051317
051318
051319
051320
051321
051322
051323
051324
051325
051326
051327
051328
051329
051330
051331
051332
051333
051334
051335
d1
Ø
Inch
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1“
d1
dec.
Inch
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
0.9531
0.9688
0.9844
1.0000
l2
Inch
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
5.1/8
5.1/8
5.3/8
5.3/8
5.5/8
5.5/8
5.7/8
5.7/8
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.3/8
6.3/8
6.3/8
6.3/8
l1
Inch
8.1/4
8.3/4
8.3/4
8.3/4
8.3/4
9“
9“
9.1/4
9.1/4
9.1/2
9.1/2
9.3/4
9.3/4
9.7/8
9.7/8
10“
10“
10“
10“
10“
10“
10“
10“
10.3/4
10.3/4
11“
11“
11“
11“
EDP #
or
e-Code
051336
051337
051338
051339
051340
051341
051342
051343
051344
051345
051346
051347
051348
051349
051350
051351
051352
051353
051354
051355
051356
051357
051358
051359
051360
051361
051362
051363
051364
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
33/64” - 1” Notched Point
123
M52CO
Ɣ
d1
Ø
40
39
36
35
34
33
32
31
30
29
28
27
26
25
24
22
21
20
124
d1
dec.
Inch
0.0980
0.0995
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1570
0.1590
0.1610
l2
Inch
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
3.3/8
3.3/8
3.3/8
l1
Inch
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
EDP #
or
e-Code
052340
052339
052336
052335
052334
052333
052332
052331
052330
052329
052328
052327
052326
052325
052324
052322
052321
052320
d1
Ø
19
18
17
16
15
14
13
12
11
10
9
8
7
5
4
3
2
1
d1
dec.
Inch
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
l1
Inch
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
EDP #
or
e-Code
052319
052318
052317
052316
052315
052314
052313
052312
052311
052310
052309
052308
052307
052305
052304
052303
052302
052301
R53OH - R51OH
Ɣ 34° helix
Ɣ Notched point
R53OH
Ŷ
Ɣ
d1
Ø
Inch
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
d1
dec.
Inch
0.3750
0.4062
0.4375
0.4688
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
l2
Inch
4.1/4
4.3/8
4.5/8
4.7/8
5“
5.1/4
5.3/8
5.5/8
5.3/4
5.7/8
EDP #
or
e-Code
053204
053206
053208
053210
053212
053214
053216
053218
053220
053222
l1
Inch
6.3/4
7“
7.1/4
7.1/2
7.3/4
8“
8.1/4
8.1/2
8.3/4
9“
d1
Ø
Inch
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1“
d1
dec.
Inch
0.6875
0.7188
0.7500
0.7812
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
l2
Inch
6“
6.3/16
6.3/8
6.1/2
6.5/8
6.3/4
7“
7“
7“
7.1/8
7.3/16
l1
Inch
9.1/4
9.1/2
9.3/4
9.7/8
10“
10.1/4
10.1/2
10.5/8
10.3/4
10.7/8
11“
EDP #
or
e-Code
053224
053226
053228
053230
053232
053234
053236
053238
053240
053242
053244
R51OH
Ɣ 23° helix
Ɣ Notched point
R51OH
Ŷ
d1
Ø
Inch
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
Ɣ
d1
dec.
Inch
0.3750
0.4062
0.4375
0.4688
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
0.7812
l2
Inch
4.1/4
4.3/8
4.5/8
4.7/8
5“
5.1/4
5.3/8
5.5/8
5.3/4
5.7/8
6“
6.3/16
6.3/8
6.1/2
l1
Inch
6.3/4
7“
7.1/4
7.1/2
7.3/4
8“
8.1/4
8.1/2
8.3/4
9“
9.1/4
9.1/2
9.3/4
9.7/8
EDP #
or
e-Code
051204
051206
051208
051210
051212
051214
051216
051218
051220
051222
051224
051226
051228
051230
d1
Ø
Inch
13/16
27/32
7/8
29/32
15/16
31/32
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
d1
dec.
Inch
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
1.0625
1.1250
1.1875
1.2500
1.3125
l2
Inch
6.5/8
6.3/4
7“
7“
7“
7.1/8
7.3/16
7.3/8
7.7/8
8.1/8
8.1/2
9.1/4
l1
Inch
10“
10.1/4
10.1/2
10.5/8
10.3/4
10.7/8
11“
11.1/4
11.3/4
12“
12.1/2
14.1/4
EDP #
or
e-Code
051232
051234
051236
051238
051240
051242
051244
051248
051252
051256
051260
051264
125
EZ51P
Ɣ Tanged shank
Ɣ Parabolic flute
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
1)
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
2“
2.1/2
2.13/16
3.1/8
3.3/8
3.5/8
3.3/4
4.1/8
4.1/8
4.3/8
4.3/8
4.13/16
4.13/16
5“
l1
Inch
3“
3.3/4
4.1/4
4.5/8
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
EDP #
or
e-Code
052404
052405
052406
052407
052408
052409
052410
052411
052412
052413
052414
052415
052416
052417
1)
1)
1)
1)
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
5“
5.1/8
5.1/8
5.1/4
5.1/4
5.3/8
5.3/8
5.5/8
5.5/8
5.11/16
5.11/16
5.3/4
5.3/4
5.3/4
5.3/4
l1
Inch
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
EDP #
or
e-Code
052418
052419
052420
052421
052422
052423
052424
052425
052426
052427
052428
052429
052430
052431
052432
Not tanged
126
R51K
Ɣ Tanged shank
Ɣ Notched point
Ŷ
Ɣ
d1Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
d1decimal
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
l2
Inch
3.3/8
3.5/8
3.3/4
4.1/8
4.1/8
4.3/8
4.3/8
4.13/16
4.13/16
5“
5“
5.1/8
5.1/8
5.1/4
5.1/4
5.3/8
5.3/8
5.5/8
5.5/8
5.11/16
l1
Inch
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
EDP #
or e-Code
051808
051809
051810
051811
051812
051813
051814
051815
051816
051817
051818
051819
051820
051821
051822
051823
051824
051825
051826
051827
d1Ø
Inch
7/16
29/64
15/32
31/64
1/2
33/64
17/32
9/16
37/64
19/32
39/64
5/8
41/64
21/32
11/16
23/32
3/4
d1decimal
Inch
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6875
0.7188
0.7500
l2
Inch
5.11/16
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6.1/4
6.1/2
6.1/2
6.1/2
6.1/2
6.3/4
6.3/4
6.7/8
7.1/8
7.3/8
l1
Inch
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
8“
8“
8.1/4
8.3/4
8.3/4
8.3/4
8.3/4
9“
9“
9.1/4
9.1/2
9.3/4
EDP #
or e-Code
051828
051829
051830
051831
051832
051833
051834
051836
051837
051838
051839
051840
051841
051842
051844
051846
051848
127
R51
Note: Sizes 45/64 and larger are steam oxide
Ɣ
d1
Ø
Inch
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
128
d1
dec.
Inch
0.0156
0.0312
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
l2
Inch
5/16
3/4
1.1/8
1.3/4
2“
2.1/4
2.1/2
2.3/4
3“
3“
3.3/8
3.3/8
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
5.1/8
5.1/8
5.3/8
5.3/8
l1
Inch
1.1/2
2“
2.1/4
3“
3.3/4
4.1/4
4.5/8
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
8“
8“
8.1/4
8.1/4
8.3/4
8.3/4
8.3/4
8.3/4
9“
9“
9.1/4
9.1/4
EDP #
or
e-Code
051001
051002
051003
051004
051005
051006
051007
051008
051009
051010
051011
051012
051013
051014
051015
051016
051017
051018
051019
051020
051021
051022
051023
051024
051025
051026
051027
051028
051029
051030
051031
051032
051033
051034
051035
051036
051037
051038
051039
051040
051041
051042
051043
051044
d1
Ø
Inch
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1“
1.1/64
1.1/32
1.3/64
1.1/16
1.5/64
1.3/32
1.7/64
1.1/8
1.9/64
1.5/32
1.11/64
1.3/16
1.13/64
1.7/32
1.15/64
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.3/4
d1
dec.
Inch
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
0.9531
0.9688
0.9844
1.0000
1.0156
1.0312
1.0469
1.0625
1.0781
1.0938
1.1094
1.1250
1.1406
1.1562
1.1719
1.1875
1.2031
1.2188
1.2344
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
1.6250
1.7500
l2
Inch
5.5/8
5.5/8
5.7/8
5.7/8
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.3/8
6.3/8
6.3/8
6.3/8
6.1/2
6.1/2
6.5/8
6.5/8
6.7/8
6.7/8
7.1/8
7.1/8
7.1/4
7.1/4
7.3/8
7.3/8
7.1/2
7.1/2
7.7/8
7.7/8
8.5/8
8.7/8
9.1/8
9.3/8
9.5/8
9.7/8
10.1/2
l1
Inch
9.1/2
9.1/2
9.3/4
9.3/4
9.7/8
9.7/8
10“
10“
10“
10“
10“
10“
10“
10“
10.3/4
10.3/4
11“
11“
11“
11“
11.1/8
11.1/8
11.1/4
11.1/4
11.1/2
11.1/2
11.3/4
11.3/4
11.7/8
11.7/8
12“
12“
12.1/8
12.1/8
12.1/2
12.1/2
14.1/4
14.1/2
14.3/4
15“
15.1/4
15.5/8
16.1/4
EDP #
or
e-Code
051045
051046
051047
051048
051049
051050
051051
051052
051053
051054
051055
051056
051057
051058
051059
051060
051061
051062
051063
051100
051101
051102
051103
051104
051105
051106
051107
051108
051109
051110
051111
051112
051113
051114
051115
051116
051120
051124
051128
051132
051136
051140
051148
R52
Ɣ
d1
Ø
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
d1
dec.
Inch
0.0135
0.0145
0.0160
0.0180
0.0200
0.0210
0.0225
0.0240
0.0250
0.0260
0.0280
0.0292
0.0310
0.0320
0.0330
0.0350
0.0360
0.0370
0.0380
0.0390
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
l2
Inch
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.3/4
1.3/4
1.3/4
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
l1
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2“
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
3“
3“
3“
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
EDP #
or
e-Code
052080
052079
052078
052077
052076
052075
052074
052073
052072
052071
052070
052069
052068
052067
052066
052065
052064
052063
052062
052061
052060
052059
052058
052057
052056
052055
052054
052053
052052
052051
052050
052049
052048
052047
052046
052045
052044
052043
052042
052041
052040
052039
d1
Ø
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
dec.
Inch
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
3“
3“
3“
3“
3“
3“
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
l1
Inch
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
EDP #
or
e-Code
052038
052037
052036
052035
052034
052033
052032
052031
052030
052029
052028
052027
052026
052025
052024
052023
052022
052021
052020
052019
052018
052017
052016
052015
052014
052013
052012
052011
052010
052009
052008
052007
052006
052005
052004
052003
052002
052001
129
R55
Ɣ
d1
Ø
A
B
C
D
E
F
G
H
I
J
K
L
M
N
130
d1
dec.
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
Inch
3.3/4
3.3/4
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
3.7/8
3.7/8
3.7/8
4“
4“
4“
l1
Inch
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/4
6.1/4
6.1/4
6.1/4
6.1/4
6.1/4
6.3/8
6.3/8
6.3/8
EDP #
or
e-Code
055001
055002
055003
055004
055005
055006
055007
055008
055009
055010
055011
055012
055013
055014
d1
Ø
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
Inch
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.1/4
4.3/8
4.3/8
4.3/8
4.3/8
4.5/8
l1
Inch
6.1/2
6.1/2
6.1/2
6.1/2
6.3/4
6.3/4
6.3/4
7“
7“
7“
7“
7.1/4
EDP #
or
e-Code
055015
055016
055017
055018
055019
055020
055021
055022
055023
055024
055025
055026
5ATL
Steam Tempered 18.00mm and above
Ɣ
d1
Ø
mm
1.00
1.20
1.25
1.30
1.40
1.50
1.60
1.70
1.80
1.90
2.00
2.10
2.15
2.20
2.30
2.40
2.50
3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
3.80
4.00
4.20
4.30
4.50
4.60
4.80
5.00
5.50
5.60
5.70
d1
decimal
Inch
0.0394
0.0472
0.0492
0.0512
0.0551
0.0591
0.0630
0.0669
0.0709
0.0748
0.0787
0.0827
0.0846
0.0866
0.0906
0.0945
0.0984
0.1181
0.1220
0.1260
0.1299
0.1339
0.1378
0.1417
0.1457
0.1496
0.1575
0.1654
0.1693
0.1772
0.1811
0.1890
0.1969
0.2165
0.2205
0.2244
l2
mm
l1
mm
33
41
41
41
45
45
50
50
53
53
56
56
59
59
59
62
62
66
69
69
69
73
73
73
73
78
78
78
82
82
82
87
87
91
91
91
56
65
65
65
70
70
76
76
80
80
85
85
90
90
90
95
95
100
106
106
106
112
112
112
112
119
119
119
126
126
126
132
132
139
139
139
EDP #
or
e-Code
056100
056120
056125
056130
056140
056150
056160
056170
056180
056190
056200
056210
056215
056220
056230
056240
056250
056300
056310
056320
056330
056340
056350
056360
056370
056380
056400
056420
056430
056450
056460
056480
056500
056550
056560
056570
d1
Ø
mm
6.00
6.40
6.50
6.80
7.00
7.20
7.50
7.80
8.00
8.20
8.50
9.00
9.20
9.50
9.80
10.00
10.20
10.50
11.00
11.20
11.50
12.00
12.50
13.00
13.50
13.80
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
d1
decimal
Inch
0.2362
0.2520
0.2559
0.2677
0.2756
0.2835
0.2953
0.3071
0.3150
0.3228
0.3346
0.3543
0.3622
0.3740
0.3858
0.3937
0.4016
0.4134
0.4331
0.4409
0.4528
0.4724
0.4921
0.5118
0.5315
0.5433
0.5512
0.5709
0.5906
0.6102
0.6299
0.6496
0.6693
0.6890
0.7087
0.7283
l2
mm
l1
mm
91
97
97
102
102
102
102
109
109
109
109
115
115
115
121
121
121
121
128
128
128
134
134
134
140
140
140
144
144
149
149
154
154
158
158
162
139
148
148
156
156
156
156
165
165
165
165
175
175
175
184
184
184
184
195
195
195
205
205
205
214
214
214
220
220
227
227
235
235
241
241
247
EDP #
or
e-Code
056600
056640
056650
056680
056770
056720
056750
056780
056800
056820
056850
056900
056920
056950
056980
057100
057102
057105
057110
057112
057115
057120
057125
057130
057135
057138
057140
057145
057150
057155
057160
057165
057170
057175
057180
057185
131
5ATL
Steam Tempered 18.00mm and above
d1
Ø
mm
19.00
19.50
20.00
20.50
21.00
21.50
22.00
22.50
23.00
23.50
24.00
24.50
132
d1
decimal
Inch
0.7480
0.7677
0.7874
0.8071
0.8268
0.8465
0.8661
0.8858
0.9055
0.9252
0.9449
0.9646
l2
mm
l1
mm
162
166
166
171
171
176
176
180
180
180
185
185
247
254
254
261
261
268
268
275
275
275
282
282
EDP #
or
e-Code
057190
057195
057200
057205
057210
057215
057220
057225
057230
057235
057240
057245
d1
Ø
mm
25.00
25.50
26.00
26.50
27.00
28.00
28.50
29.00
29.50
30.00
30.50
31.00
d1
decimal
Inch
0.9843
1.0039
1.0236
1.0433
1.0630
1.1024
1.1220
1.1417
1.1614
1.1811
1.2008
1.2205
l2
mm
l1
mm
185
190
190
190
195
195
201
201
201
201
207
207
282
290
290
290
298
298
307
307
307
307
316
316
EDP #
or
e-Code
057250
057255
057260
057265
057270
057280
057285
057290
057295
057300
057305
057310
R09
Ɣ Taper Length Drill
Ɣ Automotive Tanged Shank
Ŷ
Ɣ
d1
Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
d1
dec.
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
l2
Inch
2.3/4
3“
3“
3.3/8
3.3/8
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
l1
Inch
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
EDP #
or e-Code
051908
051909
051910
051911
051912
051913
051914
051915
051916
051917
051918
051919
051920
051921
051922
051923
051924
051925
d1
Ø
Inch
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
5/8
21/32
43/64
11/16
d1
dec.
Inch
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6250
0.6562
0.6719
0.6875
l2
Inch
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
5.1/8
5.3/8
5.3/8
l1
Inch
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
8“
8“
8.1/4
8.1/4
8.3/4
8.3/4
8.3/4
9“
9.1/4
9.1/4
EDP #
or e-Code
051926
051927
051928
051929
051930
051931
051932
051933
051934
051935
051936
051937
051938
051940
051942
051943
051944
133
R51FS - R52FS
Ɣ High helix
R51FS
Ŷ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
d1
dec.
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
l2
Inch
1.3/4
2“
2.1/4
2.1/2
2.3/4
3“
3“
3.3/8
3.3/8
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
l1
Inch
3“
3.3/4
4.1/4
4.5/8
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
EDP #
or
e-Code
051504
051505
051506
051507
051508
051509
051510
051511
051512
051513
051514
051515
051516
051517
R52FS
d1
Ø
60
58
56
55
54
53
52
51
50
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
32
31
30
29
134
d1
dec.
Inch
0.0400
0.0420
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1160
0.1200
0.1285
0.1360
l2
Inch
1.1/8
1.1/8
1.1/8
1.3/4
1.3/4
1.3/4
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.3/4
2.3/4
2.3/4
2.3/4
3“
3“
l1
Inch
2.1/4
2.1/4
2.1/4
3“
3“
3“
3.3/4
3.3/4
3.3/4
3.3/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
4.5/8
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
EDP #
or
e-Code
052560
052558
052556
052555
052554
052553
052552
052551
052550
052548
052547
052546
052545
052544
052543
052542
052541
052540
052539
052538
052537
052536
052535
052534
052532
052531
052530
052529
d1
Ø
Inch
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
Ø
28
27
26
25
24
23
22
21
20
19
18
16
15
14
13
12
11
10
9
7
6
5
4
3
2
1
d1
dec.
Inch
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
d1
dec.
Inch
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
Inch
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.3/4
l2
Inch
3“
3“
3“
3“
3“
3“
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
l1
Inch
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
7.3/4
7.3/4
l1
Inch
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
5.3/4
6“
6“
6“
6“
6“
6“
6“
6“
6“
6.1/8
6.1/8
EDP #
or
e-Code
051518
051519
051520
051521
051522
051523
051524
051525
051526
051527
051528
051529
051530
051531
051532
EDP #
or
e-Code
052528
052527
052526
052525
052524
052523
052522
052521
052520
052519
052518
052516
052515
052514
052513
052512
052511
052510
052509
052507
052506
052505
052504
052503
052502
052501
R55FS
Ɣ High helix
Ŷ
d1
Ø
B
C
D
F
G
I
J
L
M
N
d1
dec.
Inch
0.2380
0.2420
0.2460
0.2570
0.2610
0.2720
0.2770
0.2900
0.2950
0.3020
l2
Inch
3.3/4
3.3/4
3.3/4
3.7/8
3.7/8
3.7/8
3.7/8
4“
4“
4“
l1
Inch
6.1/8
6.1/8
6.1/8
6.1/4
6.1/4
6.1/4
6.1/4
6.3/8
6.3/8
6.3/8
EDP #
or
e-Code
055502
055503
055504
055506
055507
055509
055510
055512
055513
055514
d1
Ø
O
P
Q
R
T
U
V
W
d1
dec.
Inch
0.3160
0.3230
0.3320
0.3390
0.3580
0.3680
0.3770
0.3860
l2
Inch
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
l1
Inch
6.1/2
6.1/2
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
EDP #
or
e-Code
055515
055516
055517
055518
055520
055521
055522
055523
135
HSS Extra Length Drills
Style:
ProdType
A976
A977
A978
Icon1
Tool Material:
Photo
AMG Chart below.
example:
279 U
279 = SFM
Ŷ
Ɣ
PFX
Finish/Coating:
Direction of Cut:
2
Depth of Cut:
Tool Length:
7
Shank:
Helix:
Point Angle:
Point Style:
Special Standard:
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
136
3
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
Surface
LaunchLogoDate
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
PFX
Icon2
Standard:
PFX
Cata138
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
M11
Ɣ102C
M12
Ɣ85C
M13
Ŷ72C
M14
Ŷ72C
M15
Ŷ39A
M16
Ŷ33A
M17
M18
M21
Ɣ39B
M22
Ɣ23C
M23
Ɣ26A
M24
M31
M32
Ɣ75C
M33
Ɣ52C
M34
Ɣ36A
M41
Ɣ49C
M42
Ɣ36A
M43
Ɣ16A
M51
M52
M53
M61
M62
M63
Ɣ98D
M64
Ɣ89D
M71
M72
M73
M74
Ɣ89D
M81
M82
M83
M91
M101
139
139
Ɣ102B
Ɣ85B
Ŷ72B
Ŷ72B
Ŷ39A
Ŷ33A
Ɣ102A
Ɣ85A
Ŷ72A
Ŷ72A
Ŷ39A
Ŷ33A
Ɣ39B
Ɣ23B
Ɣ26A
Ɣ39A
Ɣ23A
Ɣ26A
Ɣ75B
Ɣ52B
Ɣ36A
Ɣ49B
Ɣ36A
Ɣ16A
Ɣ75A
Ɣ52A
Ɣ36A
Ɣ49A
Ɣ36A
Ɣ16A
Ɣ98C
Ɣ89C
Ɣ98B
Ɣ89B
Ɣ89C
Ɣ89B
HSS Extra Length Drills (con‘t)
CO500-12
CO501-12
500-6, 501-6,
502-6
500-12, 501-12,
502-12
QC0860P
QC1290P
0860
1290
1511
1813
A345
CO500-6
CO501-6
140
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
141
Ŷ20B
Ŷ20B
Ɣ95H
Ɣ56F
Ɣ56D
Ɣ30D
Ɣ161H
Ɣ85H
Ɣ85F
Ŷ56D
Ɣ95H
Ɣ56F
Ɣ56D
Ɣ30D
Ɣ161H
Ɣ85H
Ɣ85F
Ŷ56D
Ŷ20D
Ŷ20D
Ŷ20B
Ɣ16B
Ŷ20B
Ɣ16B
142-143
144-145
146
148
146
147
149
149
150
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ŷ46D
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ŷ46D
Ŷ79E
Ŷ72E
Ɣ52C
Ɣ49C
Ɣ20A
Ɣ16A
Ŷ79E
Ŷ72E
Ɣ52C
Ɣ49C
Ɣ20A
Ɣ16A
Ŷ79E
Ŷ72E
Ɣ52C
Ɣ49C
Ɣ20A
Ɣ16A
Ŷ79E
Ŷ72E
Ɣ52C
Ɣ49C
Ɣ20A
Ɣ16A
Ŷ79G
Ŷ72G
Ɣ56E
Ɣ49D
Ɣ20C
Ɣ16B
Ɣ82F
Ɣ66F
Ŷ43E
Ŷ30D
Ɣ82F
Ɣ66F
Ŷ43E
Ŷ30D
Ɣ49E
Ŷ26G
Ŷ30C
Ɣ49E
Ŷ26G
Ŷ30C
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ89H
Ɣ49F
Ɣ49D
Ɣ30C
Ɣ13E
Ɣ26A
Ɣ30C
Ɣ13E
Ɣ26A
Ɣ30C
Ɣ13E
Ɣ26A
Ɣ30C
Ɣ13E
Ɣ26A
Ɣ39C
Ɣ13E
Ɣ26A
Ɣ98I
Ɣ79F
Ɣ66E
Ŷ46E
Ŷ75F
Ŷ39D
Ŷ20B
Ŷ33G
Ɣ20E
Ɣ10A
Ɣ98I
Ɣ79F
Ɣ66E
Ŷ46E
Ŷ75F
Ŷ39D
Ŷ20B
Ŷ33G
Ɣ20E
Ɣ10A
Ŷ151H
Ŷ79H
Ŷ79F
Ŷ151H
Ŷ79H
Ŷ79F
Ɣ49F
Ɣ49F
Ɣ89H
Ŷ52G
Ɣ89H
Ŷ52G
Ɣ79H
Ɣ75H
Ɣ79H
Ɣ75H
Ɣ348H
Ɣ325H
Ɣ348H
Ɣ325H
Ɣ276H
Ɣ151D
Ɣ125D
Ɣ276H
Ɣ151D
Ɣ125D
Ɣ72G
Ɣ59D
Ɣ43C
Ɣ30C
Ɣ36D
Ɣ30B
Ɣ16A
Ɣ16E
Ɣ13C
Ɣ10A
Ɣ79D
Ɣ108G
Ɣ72F
Ɣ52D
Ɣ79H
Ɣ72G
Ɣ72F
Ɣ66E
Ɣ98H
Ɣ85F
Ɣ33D
Ɣ10A
Ɣ72G
Ɣ59D
Ɣ43C
Ɣ30C
Ɣ36D
Ɣ30B
Ɣ16A
Ɣ16E
Ɣ13C
Ɣ10A
Ɣ79D
Ɣ108G
Ɣ72F
Ɣ52D
Ɣ79H
Ɣ72G
Ɣ72F
Ɣ66E
Ɣ98H
Ɣ85F
Ɣ33D
Ɣ10A
Ɣ72G
Ɣ59D
Ɣ43C
Ɣ30C
Ɣ36D
Ɣ30B
Ɣ16A
Ɣ16E
Ɣ13C
Ɣ10A
Ɣ79D
Ɣ108G
Ɣ72F
Ɣ52D
Ɣ79H
Ɣ72G
Ɣ72F
Ɣ66E
Ɣ98H
Ɣ85F
Ɣ33D
Ɣ10A
Ɣ72G
Ɣ59D
Ɣ43C
Ɣ30C
Ɣ36D
Ɣ30B
Ɣ16A
Ɣ16E
Ɣ13C
Ɣ10A
Ɣ79D
Ɣ108G
Ɣ72F
Ɣ52D
Ɣ79H
Ɣ72G
Ɣ72F
Ɣ66E
Ɣ98H
Ɣ85F
Ɣ33D
Ɣ10A
Ɣ72G
Ɣ59D
Ɣ43C
Ɣ30C
Ɣ49D
Ɣ30B
Ɣ16A
Ɣ26E
Ɣ13C
Ɣ10A
Ɣ89D
Ɣ108G
Ɣ89F
Ɣ52D
Ɣ108H
Ɣ89G
Ɣ89F
Ɣ79F
Ɣ98J
Ɣ98H
Ɣ33F
Ɣ10A
Ŷ79F
Ŷ79F
Ɣ10B
Ɣ10B
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
137
A976
Ɣ PFX extra length drill
Ɣ Foret PFX extra-long
Ɣ Broca PFX Extra Larga
Ŷ
Ɣ
d1
Øh8
Inch
1/8
5/32
3/16
1)
d1
Øh8
mm
1.50
2.00
2.10
2.20
2.30
2.40
2.50
2.60
2.70
2.80
2.90
3.00
3.10
3.18
3.20
3.30
3.40
3.50
3.60
3.70
3.80
3.90
3.97
4.00
4.10
4.20
4.30
4.40
4.50
4.60
4.70
4.76
4.80
4.90
5.00
5.10
d1
decimal
Inch
0.0590
0.0787
0.0826
0.0866
0.0905
0.0944
0.0984
0.1023
0.1062
0.1102
0.1141
0.1181
0.1220
0.1251
0.1259
0.1299
0.1338
0.1377
0.1417
0.1456
0.1496
0.1535
0.1562
0.1574
0.1614
0.1653
0.1692
0.1732
0.1771
0.1811
0.1850
0.1874
0.1889
0.1929
0.1968
0.2007
l2
l1
mm
75
85
85
90
90
95
95
95
100
100
100
100
105
105
105
105
115
115
115
115
120
120
120
120
120
120
125
125
125
125
125
135
135
135
135
135
mm
115
125
125
135
135
140
140
140
150
150
150
150
155
155
155
155
165
165
165
165
175
175
175
175
175
175
185
185
185
185
185
195
195
195
195
195
Stock #
0347362
0148501
0279724
0148518
0279717
0279731
0148525
0279748
0279755
0279762
0279779
0148532
0279786
0347072
0279793
0148549
0279809
0148556
0279816
0148563
0279823
0279830
0347089
0148570
0279847
0279854
0279861
0279878
0148587
0279885
0279892
0347935
0279908
0279915
0148594
0279922
EDP #
or
e-Code
A9761.5
A9762.0X125
A9762.1X125
A9762.2X135
A9762.3X135
A9762.4X140
A9762.5X140
A9762.6X140
A9762.7X150
A9762.8X150
A9762.9X150
A9763.0X150
A9763.1X155
A9761/8
A9763.2X155
A9763.3X155
A9763.4X165
A9763.5X165
A9763.6X165
A9763.7X165
A9763.8X175
A9763.9X175
A9765/32
A9764.0X175
A9764.1X175
A9764.2X175
A9764.3X185
A9764.4X185
A9764.5X185
A9764.6X185
A9764.7X185
A9763/16
A9764.8X195
A9764.9X195
A9765.0X195
A9765.1X195
d1
Øh8
mm
5.20
5.30
5.40
5.50
5.60
5.70
5.80
5.90
6.00
6.10
6.20
6.30
1/4
6.35
6.40
6.50
6.60
6.70
6.80
6.90
7.00
7.50
5/16 7.94
8.00
8.50
11/32 8.73
9.00
9.50
3/8
9.53
10.00
10.50
11.00
7/16 11.11
11.50
12.00
12.50
1/2
12.70
13.00
14.00
d1
Øh8
Inch
d1
decimal
Inch
0.2047
0.2086
0.2125
0.2165
0.2204
0.2244
0.2283
0.2322
0.2362
0.2401
0.2440
0.2480
0.2500
0.2519
0.2559
0.2598
0.2637
0.2677
0.2716
0.2755
0.2952
0.3125
0.3149
0.3346
0.3437
0.3543
0.3740
0.3751
0.3937
0.4133
0.4330
0.4374
0.4527
0.4724
0.4921
0.5000
0.5118
0.5511
l2
l1
mm
135
135
140
140
140
140
140
140
140
150
150
150
140
150
150
150
150
155
155
155
155
165
165
165
175
175
175
185
185
185
195
195
195
205
205
205
205
215
mm
195
195
205
205
205
205
205
205
205
215
215
215
205
215
215
215
215
225
225
225
225
240
240
240
250
250
250
265
265
265
280
280
280
295
295
295
295
310
Stock #
0279939
0279946
0279953
0148600
0279960
0279977
0279984
0279991
0148617
0280003
0280010
0280027
0347096
0280034
0148624
0280041
0280058
0280065
0280072
0148631
0148648
0347102
0148655
0148662
0347119
0148679
0148686
0347126
0148693
0347133
0347140
0347379
0347157
0347164
0347171
0347188
0347195
0347201
EDP #
or
e-Code
A9765.2X195
A9765.3X195
A9765.4X205
A9765.5X205
A9765.6X205
A9765.7X205
A9765.8X205
A9765.9X205
A9766.0X205
A9766.1X215
A9766.2X215
A9766.3X215
A9761/4
A9766.4X215
A9766.5X215
A9766.6X215
A9766.7X215
A9766.8X225
A9766.9X225
A9767.0X225
A9767.5X225
A9765/16
A9768.0X240
A9768.5X240
A97611/32
A9769.0X250
A9769.5X250
A9763/8
A97610.0X265
A97610.5
A97611.0
A9767/16
A97611.5
A97612.0
A97612.5
A9761/2
A97613.0
A97614.0
1)
1)
1)
1)
1)
1)
1)
1)
1)
Dormer Standard
138
A977 - A978
Ɣ PFX extra length drill
Ɣ Foret PFX extra-long
Ɣ Broca PFX Extra Larga
A977
Ŷ
Ɣ
d1
d1
Øh8 Øh8
Inch mm
1.50
1/16 1.59
2.00
3/32 2.38
3.00
1/8
3.18
3.50
4.00
4.50
3/16 4.76
5.00
5.50
6.00
1/4
6.35
6.50
7.00
1)
d1
dec.
Inch
0.0590
0.0625
0.0787
0.0937
0.1181
0.1251
0.1377
0.1574
0.1771
0.1874
0.1968
0.2165
0.2362
0.2500
0.2559
0.2755
l2
l1
mm
100
100
110
115
130
135
145
150
160
170
170
180
180
180
190
200
mm
150
150
160
170
190
200
210
220
235
245
245
260
260
260
275
290
Stock #
0347386
0347393
0347409
0347416
0148709
0347218
0148716
0148723
0148730
0347225
0148747
0148754
0148761
0347232
0148778
0148785
EDP #
or
e-Code
A9771.5
A9771/16
A9772.0
A9773/32
A9773.0X190
A9771/8
A9773.5X210
A9774.0X220
A9774.5X235
A9773/16
A9775.0X245
A9775.5X260
A9776.0X260
A9771/4
A9776.5X275
A9777.0X290
l2
l1
mm
160
180
190
200
210
225
225
225
mm
240
265
280
295
315
330
330
330
Dormer
Stock
No.
0347324
0148853
0148860
0148877
0148884
0148891
0148907
0347331
EDP #
or
e-Code
A9783.0
A9783.5X265
A9784.0X280
A9784.5X295
A9785.0X315
A9785.5X330
A9786.0X330
A9781/4
1)
d1
d1
Øh8 Øh8
Inch mm
7.50
8.00
8.50
11/32 8.73
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
14.00
d1
dec.
Inch
0.2952
0.3149
0.3346
0.3437
0.3543
0.3740
0.3937
0.4133
0.4330
0.4527
0.4724
0.4921
0.5118
0.5511
d1
d1
Øh8 Øh8
Inch mm
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
d1
dec.
Inch
0.2559
0.2755
0.2952
0.3149
0.3346
0.3543
0.3740
0.3937
l2
l1
mm
200
210
210
220
220
220
235
235
250
250
260
260
260
270
mm
290
305
305
320
320
320
340
340
365
365
375
375
375
390
Stock #
0148792
0148808
0148815
0347249
0148822
0148839
0148846
0347256
0347263
0347270
0347287
0347294
0347300
0347317
EDP #
or
e-Code
A9777.5X290
A9778.0X305
A9778.5X305
A97711/32
A9779.0X320
A9779.5X320
A97710.0X340
A97710.5
A97711.0
A97711.5
A97712.0
A97712.5
A97713.0
A97714.0
1)
1)
1)
1)
1)
1)
Dormer Standard
A978
Ŷ
Ɣ
d1
d1
Øh8 Øh8
Inch mm
3.00
3.50
4.00
4.50
5.00
5.50
6.00
1/4 6.35
1)
d1
dec.
Inch
0.1181
0.1377
0.1574
0.1771
0.1968
0.2165
0.2362
0.2500
1)
l2
l1
mm
235
250
250
265
265
280
280
295
mm
350
370
370
390
390
410
410
430
Dormer
Stock
No.
0148914
0148921
0148938
0148945
0148952
0148969
0148976
0148983
EDP #
or
e-Code
A9786.5X350
A9787.0X370
A9787.5X370
A9788.0X390
A9788.5X390
A9789.0X410
A9789.5X410
A97810.0X430
Dormer Standard
139
CO500-6 - CO501-6
Ɣ Aircraft extension drill
Ɣ Type J
Ɣ Foret aéronautique à queue cylindrique rallongée
Ɣ Broca extralarga para la industria
Aeronáutica
CO500-6
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
l2
l1
Inch
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
Inch
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
053604
053605
053606
053607
053608
053609
053610
053611
d1
Ø
Inch
3/16
13/64
7/32
15/64
1/4
d1
decimal
Inch
0.1875
0.2031
0.2188
0.2344
0.2500
l2
l1
Inch
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
Inch
6“
6“
6“
6“
6“
EDP #
or
e-Code
053612
053613
053614
053615
053616
CO501-6
d1
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
140
d1
decimal
Inch
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
0.1285
0.1360
0.1405
0.1440
l2
l1
Inch
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
053752
053751
053750
053749
053748
053747
053746
053745
053744
053743
053742
053741
053740
053739
053738
053737
053736
053735
053734
053733
053732
053731
053730
053729
053728
053727
d1
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
decimal
Inch
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
l1
Inch
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
053726
053725
053724
053723
053722
053721
053720
053719
053718
053717
053716
053715
053714
053713
053712
053711
053710
053709
053708
053707
053706
053705
053704
053703
053702
053701
CO500-12 - CO501-12
Ɣ Type J
Aeronáutica
CO500-12
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
l2
l1
Inch
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
Inch
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
052604
052605
052606
052607
052608
052609
052610
052611
d1
Ø
Inch
3/16
13/64
7/32
15/64
1/4
EDP #
or
e-Code
052840
052833
052830
052829
052827
052821
d1
d1
decimal
Inch
0.1875
0.2031
0.2188
0.2344
0.2500
l2
l1
Inch
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
Inch
12“
12“
12“
12“
12“
EDP #
or
e-Code
052612
052613
052614
052615
052616
CO501-12
Ŷ
Ɣ
d1
40
33
30
29
27
21
d1
decimal
Inch
0.0980
0.1130
0.1285
0.1360
0.1440
0.1590
l2
l1
Inch
1.3/8
1.1/2
1.5/8
1.3/4
1.7/8
2.1/8
Inch
12“
12“
12“
12“
12“
12“
20
19
16
11
10
2
d1
decimal
Inch
0.1610
0.1660
0.1770
0.1910
0.1935
0.2210
l2
l1
Inch
2.1/8
2.1/8
2.3/16
2.5/16
2.7/16
2.5/8
Inch
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
052820
052819
052816
052811
052810
052802
141
500-6 - 502-6
Ɣ Type B
Aeronáutica
500-6
Ŷ
Ɣ
d1
Ø
Inch
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
d1
decimal
Inch
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
l2
l1
Inch
3/4
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
A
B
C
D
E
F
G
H
I
J
K
L
M
N
1)
d1
decimal
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
1)
d1
Ø
Inch
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
decimal
Inch
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
l1
Inch
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
058019
058020
058021
058022
058023
058024
058025
058026
058027
058028
058029
058030
058031
058032
502-6
502-6
d1
EDP #
or
e-Code
058003
058004
058005
058006
058007
058008
058009
058010
058011
058012
058013
058014
058015
058016
058017
058018
l2
l1
Inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
3.1/16
3.1/16
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
058201
058202
058203
058204
058205
058206
058207
058208
058209
058210
058211
058212
058213
058214
d1
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
decimal
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
l1
Inch
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
058215
058216
058217
058218
058219
058220
058221
058222
058223
058224
058225
058226
Not Split Point
142
501-6
Ɣ Type B
Aeronáutica
Ŷ
Ɣ
d1
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
1)
d1
decimal
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0520
0.0550
0.0595
0.0635
0.0670
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1100
0.1110
0.1130
0.1160
0.1200
l2
l1
Inch
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
058160
058159
058158
058157
058156
058155
058154
058153
058152
058151
058150
058149
058148
058147
058146
058145
058144
058143
058142
058141
058140
058139
058138
058137
058136
058135
058134
058133
058132
058131
d1
1)
1)
1)
1)
1)
1)
1)
1)
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
d1
decimal
Inch
0.1285
0.1360
0.1405
0.1440
0.1470
0.1495
0.1520
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1800
0.1820
0.1850
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2040
0.2055
0.2090
0.2130
0.2210
0.2280
l2
l1
Inch
1.5/8
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
058130
058129
058128
058127
058126
058125
058124
058123
058122
058121
058120
058119
058118
058117
058116
058115
058114
058113
058112
058111
058110
058109
058108
058107
058106
058105
058104
058103
058102
058101
Not Split Point
143
500-12 - 502-12
Ɣ Type B
Aeronáutica
500-12
Ŷ
Ɣ
d1
Ø
Inch
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
1)
d1
decimal
Inch
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
l2
l1
Inch
3/4
7/8
1“
1.1/4
1.1/2
1.5/8
1.3/4
2“
2.1/8
2.5/16
2.7/16
2.1/2
2.5/8
2.3/4
2.7/8
2.15/16
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059003
059004
059005
059006
059007
059008
059009
059010
059011
059012
059013
059014
059015
059016
059017
059018
1)
d1
Ø
Inch
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
decimal
Inch
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
l1
Inch
3.1/16
3.3/16
3.5/16
3.7/16
3.1/2
3.5/8
3.3/4
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059019
059020
059021
059022
059023
059024
059025
059026
059027
059028
059029
059030
059031
059032
Not Split Point
502-12
d1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
144
d1
decimal
Inch
0.2340
0.2380
0.2420
0.2460
0.2500
0.2570
0.2610
0.2660
0.2720
0.2770
0.2810
0.2900
0.2950
0.3020
l2
l1
Inch
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
3.1/16
3.1/16
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059201
059202
059203
059204
059205
059206
059207
059208
059209
059210
059211
059212
059213
059214
d1
O
P
Q
R
S
T
U
V
W
X
Y
Z
d1
decimal
Inch
0.3160
0.3230
0.3320
0.3390
0.3480
0.3580
0.3680
0.3770
0.3860
0.3970
0.4040
0.4130
l2
l1
Inch
3.3/16
3.5/16
3.7/16
3.7/16
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059215
059216
059217
059218
059219
059220
059221
059222
059223
059224
059225
059226
501-12
Ɣ Type B
Aeronáutica
Ŷ
Ɣ
d1
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
31
30
29
27
26
d1
decimal
Inch
0.0700
0.0730
0.0760
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1200
0.1285
0.1360
0.1440
0.1470
l2
l1
Inch
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.5/8
1.5/8
1.3/4
1.7/8
1.7/8
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059150
059149
059148
059147
059146
059145
059144
059143
059142
059141
059140
059139
059138
059137
059136
059131
059130
059129
059127
059126
d1
25
23
22
21
20
19
18
17
16
13
12
11
10
9
7
5
4
3
1
d1
decimal
Inch
0.1495
0.1540
0.1570
0.1590
0.1610
0.1660
0.1695
0.1730
0.1770
0.1850
0.1890
0.1910
0.1935
0.1960
0.2010
0.2055
0.2090
0.2130
0.2280
l2
l1
Inch
1.7/8
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.1/2
2.5/8
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059125
059123
059122
059121
059120
059119
059118
059117
059116
059113
059112
059111
059110
059109
059107
059105
059104
059103
059101
145
0860 - QC0860P
Ɣ Extra length drill
Ɣ Foret queue cône morse - Extra long
Ɣ Broca serie extra larga
0860
Ŷ
Ɣ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
d1
decimal
Inch
0.1250
0.1562
0.1875
0.2188
0.2500
0.2812
0.3125
0.3438
l2
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
Inch
8“
8“
8“
8“
8“
8“
8“
8“
EDP #
or
e-Code
057408
057410
057412
057414
057416
057418
057420
057422
d1
Ø
Inch
3/8
13/32
7/16
15/32
1/2
d1
decimal
Inch
0.3750
0.4062
0.4375
0.4688
0.5000
l2
l1
Inch
6“
6“
6“
6“
6“
Inch
8“
8“
8“
8“
8“
Ɣ Extra Length Drill
Ɣ Wide-Land Parabolic Flute
EDP #
or
e-Code
057424
057426
057428
057430
057432
QC0860P
Ŷ
Ɣ
d1
Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
146
d1
decimal
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
l2
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
Inch
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
EDP #
or
e-Code
055608
055609
055610
055611
055612
055613
055614
055615
055616
055617
055618
055619
055620
055621
d1
Ø
Inch
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
decimal
Inch
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
Inch
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
EDP #
or
e-Code
055622
055623
055624
055625
055626
055627
055628
055629
055630
055631
055632
1290
Ŷ
Ɣ
d1
Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
1)
d1
decimal
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
l2
l1
Inch
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059608
059609
059610
059611
059612
059613
059614
059615
059616
059617
059618
059619
059620
059621
059622
059623
059624
059625
059626
059627
d1
Ø
Inch
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
21/32
11/16
23/32
3/4
d1
decimal
Inch
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6562
0.6875
0.7188
0.7500
l2
l1
Inch
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
059628
059629
059630
059631
059632
059633
059634
059635
059636
059637
059638
059639
059640
059642
059644
059646
059648
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
33/64” - 3/4” are Steam Oxide
147
QC1290P
Ɣ Wide-Land Parabolic Flute
Ŷ
Ɣ
d1
Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
148
d1
decimal
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
l2
l1
Inch
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
060308
060309
060310
060311
060312
060313
060314
060315
060316
060317
060318
060319
d1
Ø
Inch
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
d1
decimal
Inch
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
l1
Inch
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
9“
Inch
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
12“
EDP #
or
e-Code
060320
060321
060322
060323
060324
060325
060326
060327
060328
060329
060330
060331
060332
1511 - 1813
1511 NOTE: 17/32” and larger are steam tempered
Ŷ
Ɣ
d1
Ø
Inch
3/16
1/4
5/16
11/32
3/8
7/16
1/2
17/32
9/16
5/8
d1
decimal
Inch
0.1875
0.2500
0.3125
0.3438
0.3750
0.4375
0.5000
0.5312
0.5625
0.6250
l2
l1
Inch
11“
11“
11“
11“
11“
11“
11“
11“
11“
11“
Inch
15“
15“
15“
15“
15“
15“
15“
15“
15“
15“
EDP #
or
e-Code
059512
059516
059520
059522
059524
059528
059532
059534
059536
059540
d1
Ø
Inch
21/32
11/16
23/32
3/4
25/32
13/16
7/8
15/16
1“
d1
decimal
Inch
0.6562
0.6875
0.7188
0.7500
0.7812
0.8125
0.8750
0.9375
1.0000
d1
Ø
Inch
17/32
35/64
9/16
37/64
19/32
39/64
5/8
21/32
11/16
23/32
3/4
25/32
13/16
7/8
15/16
1“
d1
decimal
Inch
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6562
0.6875
0.7188
0.7500
0.7812
0.8125
0.8750
0.9375
1.0000
l2
l1
Inch
11“
11“
11“
11“
11“
11“
11“
11“
11“
Inch
15“
15“
15“
15“
15“
15“
15“
15“
15“
l2
l1
Inch
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
Inch
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
EDP #
or
e-Code
059542
059544
059546
059548
059550
059552
059554
059556
059558
1813 NOTE: 33/64” and larger are steam tempered
Ŷ
Ɣ
d1
Ø
Inch
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
d1
decimal
Inch
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
l2
l1
Inch
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
13“
Inch
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
18“
EDP #
or
e-Code
059716
059717
059718
059719
059720
059721
059722
059723
059724
059725
059726
059727
059728
059729
059730
059731
059732
059733
EDP #
or
e-Code
059734
059735
059736
059737
059738
059739
059740
059742
059744
059746
059748
059750
059752
059756
059760
059764
149
A345
Ɣ Taper shank
Ŷ
Ɣ
d1
Ø
Inch
3/8
13/32
7/16
29/64
1/2
17/32
9/16
37/64
150
d1
Ø
mm
8.00
8.50
9.00
9.50
9.53
10.00
10.32
10.50
11.00
11.11
11.50
11.51
12.00
12.50
12.70
13.00
13.49
13.50
14.00
14.29
14.68
15.00
d1
dec.
Inch
0.3149
0.3346
0.3543
0.3740
0.3751
0.3937
0.4062
0.4133
0.4330
0.4374
0.4527
0.4531
0.4724
0.4921
0.5000
0.5118
0.5311
0.5314
0.5511
0.5625
0.5779
0.5905
l2
l1
mm
165
165
175
175
185
185
185
185
195
195
195
205
205
205
205
205
220
220
220
220
220
220
mm
265
265
275
275
285
285
285
285
300
300
300
310
310
310
310
310
325
325
325
340
340
340
MK
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
Stock #
0418383
0418390
0418406
0420201
0418307
0418062
0418116
0420171
0418079
0418369
0419564
0418284
0418093
0419571
0418055
0418109
0418161
0419588
0418123
0418413
0418321
0418130
EDP #
or
e-Code
A3458.0
A3458.5
A3459.0
A3459.5
A3453/8
A34510.0
A34513/32
A34510.5
A34511.0
A3457/16
A34511.5
A34529/64
A34512.0
A34512.5
A3451/2
A34513.0
A34517/32
A34513.5
A34514.0
A3459/16
A34537/64
A34515.0
d1
Ø
mm
15.48
15.50
5/8
15.88
16.00
41/64 16.27
16.50
21/32 16.67
17.00
11/16 17.46
17.50
18.00
18.50
19.00
3/4
19.05
19.50
20.00
20.50
21.00
21.50
22.00
7/8
22.23
22.50
d1
Ø
Inch
39/64
d1
dec.
Inch
0.6094
0.6102
0.6251
0.6299
0.6405
0.6496
0.6562
0.6692
0.6874
0.6889
0.7086
0.7283
0.7480
0.7500
0.7677
0.7874
l2
mm
230
230
230
230
230
230
230
230
245
245
245
245
245
260
260
260
260
0.8267 260
270
0.8661 270
0.8751 270
270
l1
mm
355
355
355
355
355
355
355
355
370
370
370
370
370
385
385
385
385
385
405
405
405
405
MK
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
Stock #
0418338
0419601
0418352
0418147
0418345
0419618
0418215
0418154
0418086
0419625
0418178
0419632
0418185
0418291
0419649
0418192
0419656
0418208
0419663
0418222
0418376
0419670
EDP #
or
e-Code
A34539/64
A34515.5
A3455/8
A34516.0
A34541/64
A34516.5
A34521/32
A34517.0
A34511/16
A34517.5
A34518.0
A34518.5
A34519.0
A3453/4
A34519.5
A34520.0
A34520.5
A34521.0
A34521.5
A34522.0
A3457/8
A34522.5
A345
d1
Ø
Inch
1“
1.1/4
d1
d1
Ø
dec.
mm Inch
23.00 0.9055
23.50
24.00 0.9448
24.50
25.00 0.9842
25.40 1.0000
25.50
26.00 1.0236
26.50
27.00
28.00
29.00
30.00
31.75
31.00
32.00
l2
l1
mm mm MK Stock #
270 405 3
0419687
270 425 3
0419694
290 440 3
0418239
290 440 3
0419700
290 440 3
0418246
290 440 3
0418031
290 440 3
0419717
290 440 3
0418253
290
1.0629 305
1.1023 305
305
1.1811 305
1.2500 320
320
1.2598 320
440
460
460
460
460
480
480
505
3
3
3
3
3
3
3
4
0419724
0418260
0418277
0419731
0418314
0418048
0419748
0419755
EDP #
or
e-Code
A34523.0
A34523.5
A34524.0
A34524.5
A34525.0
A3451
A34525.5
A34526.0
A34526.5
A34527.0
A34528.0
A34529.0
A34530.0
A3451.1/4
A34531.0
A34532.0
d1
Ø
Inch
d1
Ø
mm
33.00
34.00
35.00
36.00
37.00
38.00
1.1/2 38.10
39.00
40.00
41.00
42.00
1.3/4 44.45
45.00
48.00
50.00
d1
dec.
Inch
1.2992
1.3385
1.3779
1.4173
1.4566
1.4960
1.5000
1.5354
1.5748
1.6141
1.6535
1.7500
1.7716
1.8897
1.9685
l2
l1
mm
320
340
340
340
340
360
360
360
360
360
360
385
385
405
405
mm
505
530
530
530
530
555
555
555
555
555
555
585
585
605
605
MK
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Stock #
0422564
0419762
0419779
0419786
0419793
0419809
0419540
0419816
0419823
0419830
0419847
0419557
0419854
0419861
0419878
EDP #
or
e-Code
A34533.0
A34534.0
A34535.0
A34536.0
A34537.0
A34538.0
A3451.1/2
A34539.0
A34540.0
A34541.0
A34542.0
A3451.3/4
A34545.0
A34548.0
A34550.0
151
HSS Taper/Reduced Shank Drills
ProdType
209CO
Icon1
Style:
Tool Material:
209OH
209
L209
Photo
AMG Chart below.
example:
279 U
279 = SFM
Ŷ
Ɣ
Finish/Coating:
Standard:
Direction of Cut:
2
Depth of Cut:
Tool Length:
Shank:
Helix:
Point Angle:
Point Style:
4 To calculate Cutting Feed Rate, refer to chart on page 9-10.
Application
Material Groups
Groups (AMG)
(AMG)
1.1
1.1 Magnetic
Magnetic soft
soft steel
steel
1.2
1.2 Structural
Structural Steel/
Steel/ case
case carburising
carburising steel
steel
1.3
Plain
Carbon
steel
1.4
Alloy
steel
1.4 Alloy steel
1.
1. Steel
Steel
1.5
1.5 Alloy
Alloy steel/
steel/ Hardened
Hardened and
and tempered
tempered steel
steel
1.6 Alloy
Alloy steel/
steel/ Hardened
Hardened and
and tempered
tempered steel
steel
1.6
1.7 Alloy
Alloy steel
steel Hardened
Hardened
1.7
1.8 Alloy
Alloy steel
steel Hardened
Hardened
1.8
2.1
2.1 Free
Free machining
machining Stainless
Stainless Steel
Steel
2.Stainless
2.Stainless
2.2
2.2 Austenitic
Austenitic
Steel
Steel
2.3
Ferritic
+
Austenitic,
Martensitic
2.4
2.4 Precipitation
Precipitation Hardened
Hardened
3.1
3.1 Lamellar
Lamellar graphite
graphite
3.2 Lamellar
Lamellar graphite
graphite
3.2
3.Cast
3.Cast Iron
Iron
3.3 Nodular
Nodular graphite/
graphite/ Malleable
Malleable Cast
Cast Iron
Iron
3.3
3.4 Nodular
Nodular graphite/
graphite/ Malleable
Malleable Cast
Cast Iron
Iron
3.4
4.1
4.1 Titanium,
Titanium, unalloyed
unalloyed
4.Titanium
4.2
4.Titanium
4.2 Titanium,
Titanium, alloyed
alloyed
4.3
4.3 Titanium,
Titanium, alloyed
alloyed
5.1
Nickel,
unalloyed
5.Nickel
5.2
Nickel,
alloyed
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel,
Nickel, alloyed
alloyed
5.3
6.1 Copper
Copper
6.1
6.2 ß-Brass,
ß-Brass, Bronze
Bronze
6.2
6.Copper
6.Copper
6.3
6.3 Į-Brass
Į-Brass
6.4
6.4 High
High Strength
Strength Bronze
Bronze
7.1
7.1 Al,
Al, Mg,
Mg, unalloyed
unalloyed
7.2
Al
alloyed,
Si<0.5%
7.Aluminium
Magnesium
Magnesium 7.3
7.3 Al
Al alloyed,
alloyed, Si>0.5%<10%
Si>0.5%<10%
7.4 Al
Al alloyed,
alloyed, Si>10%
Si>10% Mg
Mg alloys
alloys
7.4
8.1 Thermoplastics
Thermoplastics
8.1
8.Synthetic
8.Synthetic
8.2 Thermosetting
Thermosetting plastics
plastics
8.2
Materials
Materials
8.3
8.3 Reinforced
Reinforced plastic
plastic materials
materials
9.Hard Mat.
10.Graphite
152
12L14,
12L14, 12L15
12L15
1005-1025,
1005-1025, 1214,
1214, 1215,
1215, A36
A36
1030-1060,
1030-1060, 1050-1060,
1050-1060, 1144-1146
1144-1146
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
A2-D2, H10-H41,
H10-H41, L1-L6,
L1-L6, M1-M42,
M1-M42, T1
T1
A2-D2,
A2-D2, H10-H41,
H10-H41, L1-L6,
L1-L6, M1-M42,
M1-M42, T1
T1
A2-D2,
200,
200, 303,
303, 416,
416, 420F,
420F, 430F,
430F, 440
440
301,
301, 302,
302, 304,
304, 316,
316, 321,
321, 330,
330, CUSTOM
CUSTOM 455,
455, AM-350
AM-350
318-329,
318-329, 400-446,
400-446, 15-4PH,
15-4PH, 17-4PH.
17-4PH. DUPLEX
DUPLEX
15-5PH,
Custom
450
17-4PH
Grey,
Grey, G10,
G10, Gg40,
Gg40, J431C,
J431C, A48
A48 CLASS
CLASS 20
20
Grey, GG25-Gg40,
GG25-Gg40, J158,
J158, A48
A48 CLASS
CLASS 40-60
40-60
Grey,
A220, A436,
A436, A439,
A439, A602,
A602, Black,
Black, GGG40-GGG70
GGG40-GGG70
A220,
Black Gts/Gtw,
Gts/Gtw, J434C
J434C
Black
Commercially
Commercially Pure
Pure
6A14V,
6A14V, 6A14V-2Sn,
6A14V-2Sn, Monel,
Monel, Monel
Monel K
K
6A14V-4Mo,
7A14V-4Mo,
6A14V-4Mo, 7A14V-4Mo, 4911-4967
4911-4967
Commercially
Pure,
17644,
200,
5553
Monel
Monel 400,
400, Hastelloy
Hastelloy C,
C, Inconel
Inconel 625,
625, Waspaloy
Waspaloy
Iconel 718,Nimonic
718,Nimonic 75-95,Rene
75-95,Rene 41,Iconel
41,Iconel 825,A286
825,A286
Iconel
Commercially Pure
Pure
Commercially
314-340, 350-370
350-370
314-340,
Alloyed
Alloyed Cu
Cu +
+ Al
Al +
+ Fe,
Fe, Long
Long Chipping
Chipping
Ampco
Ampco 18-25
18-25
Commercially
Pure
Commercially Pure
6061
6061 T6,
T6, 7075,
7075, 314-340
314-340
6061
6061 T6,
T6, 380-390
380-390
Magnesium Whisker
Whisker Reinforced
Reinforced
Magnesium
Ultramid, Polystrol
Polystrol
Ultramid,
Bakelit, Pertinax
Pertinax
Bakelit,
CFK,
CFK, GFKAFK
GFKAFK
Ferrotic
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
Hardness
HB
1
Icon2
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
3
LaunchLoSurface
goDate
154
Cata1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
M11
Ɣ115J
M12
Ɣ98H
M13
Ɣ89G
M14
Ɣ75F
M15
Ŷ56E
M16
Ŷ33D
M17
M18
M21
Ɣ79E
M22
Ŷ36G
M23
Ŷ56C
M24
M31
Ɣ115J
M32
Ɣ92G
M33
Ɣ72E
M34
Ŷ56E
M41
Ɣ92G
M42
Ɣ66D
M43
Ɣ36C
M51
Ɣ49G
M52
Ɣ23E
M53
Ɣ20B
M61
Ɣ125L
M62
Ɣ131J
M63
Ɣ89H
M64
Ɣ69F
M71
Ɣ108J
M72
Ɣ98I
M73
Ɣ98H
M74
Ɣ89F
M81
Ɣ115K
M82
Ɣ92J
M83
Ɣ66H
M91
Ɣ16C
M101
155
156
158
Ŷ154F
Ŷ75F
Ŷ98H
Ŷ85F
Ɣ59D
Ɣ30B
Ŷ115I
Ŷ98I
Ŷ82F
Ŷ66F
Ɣ39E
Ɣ30D
Ŷ115I
Ŷ98I
Ŷ82F
Ŷ66F
Ɣ39E
Ɣ30D
Ɣ118H
Ɣ66F
Ɣ66D
Ɣ49D
Ŷ180H
Ŷ108H
Ɣ134F
Ɣ75D
Ɣ108H
Ɣ98F
Ɣ26D
Ɣ75F
Ɣ49E
Ɣ30G
Ɣ33C
Ɣ49E
Ɣ30G
Ɣ33C
Ŷ98I
Ŷ79E
Ɣ66E
Ɣ46E
Ɣ75F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ23E
Ɣ13A
Ɣ108F
Ɣ115I
Ɣ115H
Ɣ52F
Ɣ85J
Ɣ98I
Ɣ92H
Ɣ75H
Ɣ98K
Ɣ92J
Ɣ46H
Ɣ10B
Ŷ98I
Ŷ79E
Ɣ66E
Ɣ46E
Ɣ75F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ23E
Ɣ13A
Ɣ108F
Ɣ115I
Ɣ115H
Ɣ52F
Ɣ85J
Ɣ98I
Ɣ92H
Ɣ75H
Ɣ98K
Ɣ92J
Ɣ46H
Ɣ10B
HSS Taper/Reduced Shank Drills (con‘t)
5ATS
R56CO
R56
R57
R58
S209
159
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
160
162
163
164
165
Ŷ115I
Ŷ98I
Ŷ82F
Ŷ66F
Ɣ39E
Ɣ30D
Ŷ115I
Ŷ98I
Ŷ82F
Ŷ66F
Ɣ39E
Ɣ30D
Ɣ115H
Ɣ98H
Ɣ82F
Ɣ66E
Ɣ43D
Ɣ30C
Ɣ115H
Ɣ98H
Ɣ82F
Ɣ66E
Ɣ43D
Ɣ30C
Ɣ115H
Ɣ98H
Ɣ82F
Ɣ66E
Ɣ43D
Ɣ30C
Ŷ98F
Ŷ59F
Ŷ66H
Ŷ59F
Ɣ46D
Ɣ49E
Ɣ30G
Ɣ33C
Ɣ49E
Ɣ30G
Ɣ33C
Ɣ49D
Ɣ23F
Ɣ23B
Ɣ49D
Ɣ23F
Ɣ23B
Ɣ49D
Ɣ23F
Ɣ23B
Ɣ89H
Ɣ49F
Ɣ49D
Ŷ98I
Ŷ79E
Ɣ66E
Ɣ46E
Ɣ75F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ23E
Ɣ13A
Ɣ108F
Ɣ115I
Ɣ115H
Ɣ52F
Ɣ85J
Ɣ98I
Ɣ92H
Ɣ75H
Ɣ98K
Ɣ92J
Ɣ46H
Ɣ10B
Ŷ98I
Ŷ79E
Ɣ66E
Ɣ46E
Ɣ75F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ23E
Ɣ13A
Ɣ108F
Ɣ115I
Ɣ115H
Ɣ52F
Ɣ85J
Ɣ98I
Ɣ92H
Ɣ75H
Ɣ98K
Ɣ92J
Ɣ46H
Ɣ10B
Ɣ89H
Ɣ72E
Ɣ62D
Ɣ39D
Ɣ56E
Ɣ30C
Ɣ16A
Ɣ26F
Ɣ13D
Ɣ10A
Ɣ115F
Ɣ108H
Ɣ89G
Ɣ52F
Ɣ108I
Ɣ98H
Ɣ89G
Ɣ72G
Ɣ98I
Ɣ92G
Ɣ46E
Ɣ10A
Ɣ89H
Ɣ72E
Ɣ62D
Ɣ39D
Ɣ56E
Ɣ30C
Ɣ16A
Ɣ26F
Ɣ13D
Ɣ10A
Ɣ115F
Ɣ108H
Ɣ89G
Ɣ52F
Ɣ108I
Ɣ98H
Ɣ89G
Ɣ72G
Ɣ98I
Ɣ92G
Ɣ46E
Ɣ10A
Ɣ89H
Ɣ72E
Ɣ62D
Ɣ39D
Ɣ56E
Ɣ30C
Ɣ16A
Ɣ26F
Ɣ13D
Ɣ10A
Ɣ115F
Ɣ108H
Ɣ89G
Ɣ52F
Ɣ108I
Ɣ98H
Ɣ89G
Ɣ72G
Ɣ98I
Ɣ92G
Ɣ46E
Ɣ10A
Ŷ151H
Ŷ79H
Ɣ79F
Ɣ89H
Ɣ49F
Ɣ49F
Ɣ23F
Ɣ13B
Ɣ108F
Ɣ115H
Ɣ115H
Ɣ52F
Ɣ85I
Ɣ98H
Ɣ92H
Ɣ75H
Ɣ98I
Ɣ92I
Ɣ46H
Ɣ10B
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
153
209CO
Ɣ Taper shank drill
Ɣ Notched point
Ɣ Foret queue cône morse
Ɣ Broca de mango cónico
Ŷ
Ɣ
d1
Ø
Inch
1/4
9/32
5/16
11/32
3/8
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
154
d1
decimal
Inch
0.2500
0.2812
0.3125
0.3438
0.3750
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
l2
Inch
2.7/8
3“
3.1/8
3.1/4
3.1/2
3.5/8
3.7/8
3.7/8
4.1/8
4.1/8
4.3/8
4.3/8
4.5/8
4.5/8
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
5.1/8
5.1/8
5.3/8
5.3/8
5.5/8
5.5/8
5.7/8
5.7/8
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
l1
Inch
6.1/8
6.1/4
6.3/8
6.1/2
7.3/8
7.1/2
7.3/4
7.3/4
8“
8“
8.1/4
8.1/4
8.1/2
8.1/2
8.3/4
8.3/4
8.3/4
8.3/4
8.3/4
8.3/4
9“
9.3/4
10“
10“
10.1/4
10.1/4
10.1/2
10.1/2
10.5/8
10.5/8
10.3/4
10.3/4
10.3/4
10.3/4
MTS
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
021316
021318
021320
021322
021324
021326
021327
021328
021329
021330
021331
021332
021333
021334
021335
021336
021337
021338
021339
021340
021341
021342
021343
021344
021345
021348
021347
021350
021349
021352
021351
021354
021353
021355
d1
Ø
Inch
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1“
1.1/64
1.1/32
1.1/16
1.3/32
1.7/64
1.1/8
1.9/64
1.5/32
1.11/64
1.3/16
1.7/32
1.15/64
1.1/4
1.9/32
1.19/64
1.5/16
1.11/32
1.23/64
1.3/8
1.27/64
1.7/16
1.15/32
1.31/64
1.1/2
d1
decimal
Inch
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
0.9531
0.9688
0.9844
1.0000
1.0156
1.0312
1.0625
1.0938
1.1094
1.1250
1.1406
1.1562
1.1719
1.1875
1.2188
1.2344
1.2500
1.2812
1.2969
1.3125
1.3438
1.3594
1.3750
1.4219
1.4375
1.4688
1.4844
1.5000
l2
Inch
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.3/8
6.3/8
6.3/8
6.3/8
6.1/2
6.1/2
6.5/8
6.7/8
7.1/8
7.1/8
7.1/4
7.1/4
7.3/8
7.3/8
7.1/2
7.7/8
7.7/8
8.1/2
8.5/8
8.5/8
8.3/4
8.7/8
8.7/8
9.1/8
9.1/8
9.1/4
9.3/8
9.3/8
l1
Inch
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
11“
11“
11“
11“
12.1/8
12.1/8
12.1/4
12.1/2
12.3/4
12.3/4
12.7/8
12.7/8
13“
13“
13.1/8
13.1/2
13.1/2
14.1/8
14.1/4
14.1/4
14.3/8
14.1/2
14.1/2
14.3/4
14.3/4
14.7/8
15“
15“
MTS
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
021357
021356
021358
021359
021362
021360
021363
021364
021365
021400
021401
021402
021404
021406
021407
021408
021409
021410
021411
021412
021414
021415
021416
021418
021419
021420
021422
021423
021424
021427
021428
021430
021431
021432
209OH
Ɣ 32° helix
Ɣ Notched point
Ŷ
d1
Ø
Inch
1/2
9/16
5/8
11/16
3/4
13/16
7/8
29/32
15/16
31/32
Ɣ
d1
decimal
Inch
0.5000
0.5625
0.6250
0.6875
0.7500
0.8125
0.8750
0.9062
0.9375
0.9688
l2
Inch
4.3/8
4.7/8
4.7/8
5.3/8
5.7/8
6.1/8
6.1/8
6.1/8
6.1/8
6.3/8
l1
Inch
9“
9.1/2
9.1/2
10“
10.1/2
10.3/4
10.3/4
10.3/4
10.3/4
11“
MTS
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
021632
021636
021640
021644
021648
021652
021656
021658
021660
021662
d1
Ø
Inch
1“
1.1/32
1.1/16
1.3/32
1.1/8
1.5/32
1.3/16
1.7/32
1.1/4
d1
decimal
Inch
1.0000
1.0312
1.0625
1.0938
1.1250
1.1562
1.1875
1.2188
1.2500
l2
Inch
6.3/8
6.1/2
6.5/8
6.7/8
7.1/8
7.1/4
7.3/8
7.1/2
7.7/8
l1
Inch
11“
11.1/8
11.1/4
12.1/2
12.3/4
12.7/8
13“
13.1/8
13.1/2
MTS
3
3
3
4
4
4
4
4
4
EDP #
or
e-Code
021700
021702
021704
021706
021708
021710
021712
021714
021716
155
209
Ŷ
Ɣ
d1
Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
156
d1
decimal
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
l2
Inch
1.7/8
2.1/8
2.1/8
2.1/2
2.1/2
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3.1/8
3.1/8
3.1/4
3.1/4
3.1/2
3.1/2
3.5/8
3.5/8
3.7/8
3.7/8
4.1/8
4.1/8
4.3/8
4.3/8
4.5/8
4.5/8
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
5.1/8
5.1/8
5.3/8
l1
Inch
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
7.1/2
8.1/4
8.1/4
8.1/2
8.1/2
8.3/4
8.3/4
8.3/4
8.3/4
8.3/4
8.3/4
9“
9“
9.1/4
MTS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
020008
020009
020010
020011
020012
020013
020014
020015
020016
020017
020018
020019
020020
020021
020022
020023
020024
020025
020026
020027
020028
020029
020030
020031
020032
020033
020034
020035
020036
020037
020038
020039
020040
020041
020042
020043
d1
Ø
Inch
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1“
1.1/64
1.1/32
1.3/64
1.1/16
1.5/64
1.3/32
1.7/64
1.1/8
1.9/64
1.5/32
1.11/64
1.3/16
1.13/64
1.7/32
1.15/64
d1
decimal
Inch
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
0.9531
0.9688
0.9844
1.0000
1.0156
1.0312
1.0469
1.0625
1.0781
1.0938
1.1094
1.1250
1.1406
1.1562
1.1719
1.1875
1.2031
1.2188
1.2344
l2
Inch
5.3/8
5.5/8
5.5/8
5.7/8
5.7/8
6“
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.3/8
6.3/8
6.3/8
6.3/8
6.1/2
6.1/2
6.5/8
6.5/8
6.7/8
6.7/8
7.1/8
7.1/8
7.1/4
7.1/4
7.3/8
7.3/8
7.1/2
7.1/2
7.7/8
l1
Inch
9.1/4
9.1/2
9.1/2
9.3/4
9.3/4
9.7/8
9.7/8
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
11“
11“
11“
11“
11.1/8
11.1/8
11.1/4
11.1/4
12.1/2
12.1/2
12.3/4
12.3/4
12.7/8
12.7/8
13“
13“
13.1/8
13.1/8
13.1/2
MTS
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
020044
020045
020046
020047
020048
020049
020050
020051
020052
020053
020054
020055
020056
020057
020058
020059
020060
020061
020062
020063
020100
020101
020102
020103
020104
020105
020106
020107
020108
020109
020110
020111
020112
020113
020114
020115
209
d1
Ø
Inch
1.1/4
1.17/64
1.9/32
1.19/64
1.5/16
1.21/64
1.11/32
1.23/64
1.3/8
1.25/64
1.13/32
1.27/64
1.7/16
1.29/64
1.15/32
1.31/64
1.1/2
1.17/32
d1
decimal
Inch
1.2500
1.2656
1.2812
1.2969
1.3125
1.3281
1.3438
1.3594
1.3750
1.3906
1.4062
1.4219
1.4375
1.4531
1.4688
1.4844
1.5000
1.5312
l2
Inch
7.7/8
8.1/2
8.1/2
8.5/8
8.5/8
8.3/4
8.3/4
8.7/8
8.7/8
9“
9“
9.1/8
9.1/8
9.1/4
9.1/4
9.3/8
9.3/8
9.3/8
l1
Inch
13.1/2
14.1/8
14.1/8
14.1/4
14.1/4
14.3/8
14.3/8
14.1/2
14.1/2
14.5/8
14.5/8
14.3/4
14.3/4
14.7/8
14.7/8
15“
15“
16.3/8
MTS
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
EDP #
or
e-Code
020116
020117
020118
020119
020120
020121
020122
020123
020124
020125
020126
020127
020128
020129
020130
020131
020132
020134
d1
Ø
Inch
1.9/16
1.19/32
1.5/8
1.21/32
1.11/16
1.23/32
1.3/4
1.25/32
1.13/16
1.27/32
1.7/8
1.29/32
1.15/16
1.31/32
2“
d1
decimal
Inch
1.5625
1.5938
1.6250
1.6562
1.6875
1.7188
1.7500
1.7812
1.8125
1.8438
1.8750
1.9062
1.9375
1.9688
2.0000
l2
Inch
9.5/8
9.7/8
10“
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
10.3/8
10.3/8
10.3/8
10.3/8
10.3/8
l1
Inch
16.5/8
16.7/8
17“
17.1/8
17.1/8
17.1/8
17.1/8
17.1/8
17.1/8
17.1/8
17.3/8
17.3/8
17.3/8
17.3/8
17.3/8
MTS
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
EDP #
or
e-Code
020136
020138
020140
020142
020144
020146
020148
020150
020152
020154
020156
020158
020160
020162
020200
157
L209
Ɣ Large shank
Ŷ
Ɣ
d1
Ø
Inch
3/8
25/64
13/32
27/64
7/16
29/64
15/32
41/64
21/32
43/64
158
d1
decimal
Inch
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
0.4688
0.6406
0.6562
0.6719
l2
Inch
3.1/2
3.5/8
3.5/8
3.7/8
3.7/8
4.1/8
4.1/8
5.1/8
5.1/8
5.3/8
l1
Inch
7.3/8
7.1/2
7.1/2
7.3/4
7.3/4
8“
8“
9.3/4
9.3/4
10“
MTS
2
2
2
2
2
2
2
3
3
3
EDP #
or
e-Code
022524
022525
022526
022527
022528
022529
022530
022541
022542
022543
d1
Ø
Inch
11/16
45/64
23/32
47/64
3/4
49/64
25/32
1“
1.1/32
1.1/16
d1
decimal
Inch
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
1.0000
1.0312
1.0625
l2
Inch
5.3/8
5.5/8
5.5/8
5.7/8
5.7/8
6“
6“
6.3/8
6.1/2
6.5/8
l1
Inch
10“
10.1/4
10.1/4
10.1/2
10.1/2
10.5/8
10.5/8
12“
12.1/8
12.1/4
MTS
3
3
3
3
3
3
3
4
4
4
EDP #
or
e-Code
022544
022545
022546
022547
022548
022549
022550
022600
022602
022604
S209
Ɣ Small shank
Foret queue cône morse
Ŷ
Ɣ
d1
Ø
Inch
31/64
1/2
33/64
17/32
35/64
9/16
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
1.5/64
1.3/32
1.7/64
1.1/8
1.9/64
1.5/32
1.11/64
1.3/16
1.13/64
1.7/32
1.15/64
1.1/4
d1
decimal
Inch
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
1.0781
1.0938
1.1094
1.1250
1.1406
1.1562
1.1719
1.1875
1.2031
1.2188
1.2344
1.2500
l2
Inch
4.3/8
4.3/8
4.5/8
4.5/8
4.7/8
4.7/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.7/8
6.7/8
7.1/8
7.1/8
7.1/4
7.1/4
7.3/8
7.3/8
7.1/2
7.1/2
7.7/8
7.7/8
l1
Inch
7.3/4
7.3/4
8“
8“
8.1/4
8.1/4
10“
10“
10“
10“
10“
10“
10“
10“
11.1/2
11.1/2
11.3/4
11.3/4
11.7/8
11.7/8
12“
12“
12.1/8
12.1/8
12.1/2
12.1/2
MTS
1
1
1
1
1
1
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
023031
023032
023033
023034
023035
023036
023051
023052
023053
023054
023055
023056
023057
023058
023105
023106
023107
023108
023109
023110
023111
023112
023113
023114
023115
023116
d1
Ø
Inch
1.33/64
1.17/32
1.35/64
1.9/16
1.37/64
1.19/32
1.39/64
1.5/8
1.41/64
1.21/32
1.43/64
1.11/16
1.45/64
1.23/32
1.47/64
1.3/4
1.25/32
1.13/16
1.27/32
1.7/8
1.29/32
1.15/16
1.31/32
2“
d1
decimal
Inch
1.5156
1.5312
1.5469
1.5625
1.5781
1.5938
1.6094
1.6250
1.6406
1.6562
1.6719
1.6875
1.7031
1.7188
1.7344
1.7500
1.7812
1.8125
1.8438
1.8750
1.9062
1.9375
1.9688
2.0000
l2
Inch
9.3/8
9.3/8
9.5/8
9.5/8
9.7/8
9.7/8
10“
10“
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
10.3/8
10.3/8
10.3/8
10.3/8
10.3/8
10.1/2
10.1/2
10.5/8
10.5/8
10.5/8
l1
Inch
15“
15“
15.1/4
15.1/4
15.1/2
15.1/2
15.5/8
15.5/8
15.3/4
15.3/4
15.3/4
15.3/4
15.3/4
15.3/4
16.1/4
16.1/4
16.1/4
16.1/4
16.1/4
16.1/2
16.1/2
16.5/8
16.5/8
16.5/8
MTS
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
023133
023134
023135
023136
023137
023138
023139
023140
023141
023142
023143
023144
023145
023146
023147
023148
023150
023152
023154
023156
023158
023160
023162
023200
159
5ATS
Ŷ
Ɣ
d1
Ø
mm
5.00
5.50
6.00
6.50
6.80
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.20
10.50
11.00
11.50
12.00
12.20
12.50
12.80
13.00
13.50
13.80
14.00
14.25
14.50
14.75
15.00
15.25
15.50
15.75
16.00
16.25
16.50
16.75
17.00
160
d1
decimal
Inch
0.1969
0.2165
0.2362
0.2559
0.2677
0.2756
0.2953
0.3150
0.3346
0.3543
0.3740
0.3937
0.4016
0.4134
0.4331
0.4528
0.4724
0.4803
0.4921
0.5039
0.5118
0.5315
0.5433
0.5512
0.5610
0.5709
0.5807
0.5906
0.6004
0.6102
0.6201
0.6299
0.6398
0.6496
0.6594
0.6693
l2
mm
l1
mm
52
57
57
63
69
69
69
75
75
81
81
87
87
87
94
94
101
101
101
101
101
108
108
108
114
114
114
114
120
120
120
120
125
125
125
125
133
138
138
144
150
150
150
156
156
162
162
168
168
168
175
175
182
182
182
182
182
189
189
189
212
212
212
212
218
218
218
218
223
223
223
223
MTS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
026050
026055
026060
026065
026068
026070
026075
026080
026085
026090
026095
026100
026102
026105
026110
026115
026120
026122
026125
026128
026130
026135
026138
026140
026142
026145
026147
026150
026152
026155
026157
026160
026162
026165
026167
026170
d1
Ø
mm
17.25
17.50
18.00
18.50
19.00
19.50
20.00
20.50
21.00
21.50
22.00
22.50
23.00
23.50
24.00
24.50
25.00
25.50
26.00
26.50
27.00
27.50
28.00
28.50
29.00
29.50
30.00
30.50
31.00
31.50
32.00
32.50
33.00
33.50
34.00
34.50
d1
decimal
Inch
0.6791
0.6890
0.7087
0.7283
0.7480
0.7677
0.7874
0.8071
0.8268
0.8465
0.8661
0.8858
0.9055
0.9252
0.9449
0.9646
0.9843
1.0039
1.0236
1.0433
1.0630
1.0827
1.1024
1.1220
1.1417
1.1614
1.1811
1.2008
1.2205
1.2402
1.2598
1.2795
1.2992
1.3189
1.3386
1.3583
l2
mm
l1
mm
130
130
130
135
135
140
140
145
145
150
150
155
155
155
160
160
160
165
165
165
170
170
170
175
175
175
175
180
180
180
185
185
185
185
190
190
228
228
228
233
233
238
238
243
243
248
248
253
253
276
281
281
281
286
286
286
291
291
291
296
296
296
296
301
301
301
334
334
334
334
339
339
MTS
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
EDP #
or
e-Code
026172
026175
026180
026185
026190
026195
026200
026205
026210
026215
026220
026225
026230
026235
026240
026245
026250
026255
026260
026265
026270
026275
026280
026285
026290
026295
026300
026305
026310
026315
026320
026325
026330
026335
026340
026345
5ATS
d1
Ø
mm
35.00
35.50
36.00
36.50
37.00
37.50
38.00
39.00
40.00
41.00
d1
decimal
Inch
1.3780
1.3976
1.4173
1.4370
1.4567
1.4764
1.4961
1.5354
1.5748
1.6142
l2
mm
l1
mm
190
190
195
195
195
195
200
200
200
205
339
339
344
344
344
344
349
349
349
354
MTS
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
026350
026355
026360
026365
026370
026375
026380
026390
026400
026410
d1
Ø
mm
42.00
43.00
44.00
45.00
47.00
48.00
49.00
50.00
d1
decimal
Inch
1.6535
1.6929
1.7323
1.7717
1.8504
1.8898
1.9291
1.9685
l2
mm
l1
mm
205
210
210
210
215
220
220
220
354
359
359
359
364
369
369
369
MTS
4
4
4
4
4
4
4
4
EDP #
or
e-Code
026420
026430
026440
026450
026470
026480
026490
026500
161
R56CO
Ɣ Foret queue dégagée de 12,7 mm
Ɣ 1/2” reduced parallel shank drill
Ɣ Round shank
Ɣ Brocas de mango cilindrico, Mango
rebajado 1/2”
d2
Ɣ
d1
Ø
Inch
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
162
d1
decimal
Inch
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
EDP #
or
e-Code
092333
092334
092335
092336
092337
092338
092339
092340
092341
092342
092343
092344
092345
092346
092347
092348
d1
Ø
Inch
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1“
d1
decimal
Inch
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
0.9531
0.9688
0.9844
1.0000
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
EDP #
or
e-Code
092349
092350
092351
092352
092353
092354
092355
092356
092357
092358
092359
092360
092361
092362
092363
092364
R56
Ɣ Silver & Deming, round shank
rebajado 1/2”
d2
Ɣ
d1
Ø
Inch
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
d1
decimal
Inch
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
Ø
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
EDP #
or
e-Code
091433
091434
091435
091436
091437
091438
091439
091440
091441
091442
091443
091444
091445
091446
091447
091448
091449
091450
091451
091452
091453
091454
091455
091456
091457
091458
091459
091460
d1
Ø
Inch
61/64
31/32
63/64
1“
1.1/64
1.1/32
1.3/64
1.1/16
1.5/64
1.3/32
1.7/64
1.1/8
1.9/64
1.5/32
1.11/64
1.3/16
1.13/64
1.7/32
1.15/64
1.1/4
1.9/32
1.5/16
1.11/32
1.3/8
1.13/32
1.7/16
1.15/32
1.1/2
d1
decimal
Inch
0.9531
0.9688
0.9844
1.0000
1.0156
1.0312
1.0469
1.0625
1.0781
1.0938
1.1094
1.1250
1.1406
1.1562
1.1719
1.1875
1.2031
1.2188
1.2344
1.2500
1.2812
1.3125
1.3438
1.3750
1.4062
1.4375
1.4688
1.5000
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
Ø
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
EDP #
or
e-Code
091461
091462
091463
091464
091465
091486
091467
091468
091469
091470
091471
091472
091473
091487
091474
091476
091475
091488
091477
091480
091479
091482
091497
091483
091492
091484
091495
091485
163
R57
Ɣ Silver & Deming, 3-flats
rebajado 1/2”
d2
Ɣ
d1
Ø
Inch
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
164
d1
decimal
Inch
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8906
0.9062
0.9219
0.9375
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
Ø
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
EDP #
or
e-Code
091533
091534
091535
091536
091537
091538
091539
091540
091541
091542
091543
091544
091545
091546
091547
091548
091549
091550
091551
091552
091553
091554
091555
091556
091557
091558
091559
091560
d1
Ø
Inch
61/64
31/32
63/64
1“
1.1/64
1.1/32
1.3/64
1.1/16
1.5/64
1.3/32
1.7/64
1.1/8
1.9/64
1.5/32
1.11/64
1.3/16
1.13/64
1.7/32
1.15/64
1.1/4
1.9/32
1.5/16
1.11/32
1.3/8
1.13/32
1.7/16
1.15/32
1.1/2
d1
decimal
Inch
0.9531
0.9688
0.9844
1.0000
1.0156
1.0312
1.0469
1.0625
1.0781
1.0938
1.1094
1.1250
1.1406
1.1562
1.1719
1.1875
1.2031
1.2188
1.2344
1.2500
1.2812
1.3125
1.3438
1.3750
1.4062
1.4375
1.4688
1.5000
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
Ø
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
EDP #
or
e-Code
091561
091562
091563
091564
091565
091586
091567
091568
091569
091570
091571
091572
091573
091587
091575
091576
091577
091588
091579
091580
091589
091582
091592
091583
091595
091584
091598
091585
R58
Ɣ Silver & Deming, round shank
rebajado 3/4”
d2
Ŷ
Ɣ
d1
Ø
Inch
1“
1.1/32
1.1/16
1.3/32
1.1/8
1.5/32
1.3/16
1.7/32
1.1/4
1.9/32
1.5/16
1.11/32
d1
decimal
Inch
1.0000
1.0313
1.0625
1.0938
1.1250
1.1562
1.1875
1.2188
1.2500
1.2812
1.3125
1.3438
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
Ø
Inch
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
EDP #
or
e-Code
091264
091266
091268
091270
091272
091274
091276
091278
091280
091282
091284
091286
d1
Ø
Inch
1.3/8
1.13/32
1.7/16
1.15/32
1.1/2
1.9/16
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
d1
decimal
Inch
1.3750
1.4062
1.4375
1.4688
1.5000
1.5625
1.6250
1.6875
1.7500
1.8125
1.8750
1.9375
2.0000
l2
Inch
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
d2
Ø
Inch
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
EDP #
or
e-Code
091288
091290
091292
091294
091296
091298
091300
091302
091304
091306
091308
091310
091312
165
HSS Special Purpose Drills
Style:
D000
D444
D555
Tool Material:
AMG Chart below.
example:
279 U
279 = SFM
4 To calculate Cutting Feed Rate, refer to chart on page 9-10.
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
2
Tool Length:
Shank:
Helix:
Point Angle:
Point Style:
Special Standard:
Application Material Groups (AMG) With Examples
1
Hardness
HB
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
166
Ŷ
Ɣ
3
168
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
169
170
Ŷ125D
Ŷ298H
Ŷ298H
Ŷ226F
Ɣ200D
Ŷ298H
Ŷ298H
Ŷ226F
Ɣ200D
HSS Special Purpose Drills (con‘t)
76LO
B76HA
A217
A218
A221
171
171
171
172
173
A236
Spotting
Drills
SP Series
ATR41
60B
SM8
TS10
TS15
TS18
TS40
TS41
TS51
TS52
TS55
76HA
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
173
174
Ŷ115I
Ŷ98I
Ŷ82G
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115I
Ŷ98I
Ŷ82G
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115I
Ŷ98I
Ŷ82G
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115I
Ŷ98I
Ŷ82G
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115I
Ŷ98I
Ŷ82G
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115I
Ŷ98I
Ŷ82G
Ŷ66F
Ɣ43E
Ɣ30D
Ŷ115E
Ŷ98E
Ŷ89C
Ɣ69C
Ɣ46C
Ɣ33B
Ɣ49E
Ɣ26G
Ɣ33C
Ɣ49E
Ɣ26G
Ɣ33C
Ɣ49E
Ɣ26G
Ɣ33C
Ɣ49E
Ɣ26G
Ɣ33C
Ɣ49E
Ɣ26G
Ɣ33C
Ɣ49E
Ɣ26G
Ɣ33C
Ŷ98I
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ79F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ16E
Ɣ13A
Ɣ115G
Ɣ108I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ72H
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98I
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ79F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ16E
Ɣ13A
Ɣ115G
Ɣ108I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ72H
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98I
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ79F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ16E
Ɣ13A
Ɣ115G
Ɣ108I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ72H
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98I
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ79F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ16E
Ɣ13A
Ɣ115G
Ɣ108I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ72H
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98I
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ79F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ16E
Ɣ13A
Ɣ115G
Ɣ108I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ72H
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
Ŷ98I
Ŷ79F
Ɣ66E
Ɣ46E
Ɣ79F
Ɣ43D
Ɣ23B
Ɣ33G
Ɣ16E
Ɣ13A
Ɣ115G
Ɣ108I
Ɣ89H
Ɣ52G
Ɣ108J
Ɣ98I
Ɣ89H
Ɣ72H
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ10B
175
176
176
177
177
177
Ɣ82F
Ɣ66F
Ŷ43E
Ŷ30D
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ɣ52C
Ɣ30D
Ɣ33B
Ɣ49E
Ŷ26G
Ŷ30C
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ52F
Ɣ30H
Ɣ33D
Ɣ105E
Ɣ89C
Ɣ66C
Ɣ52B
Ɣ89C
Ɣ39B
Ɣ23A
Ɣ43D
Ɣ26C
Ɣ13A
Ŷ89D
Ŷ108E
Ŷ89D
Ŷ52D
Ŷ108E
Ŷ98E
Ɣ98D
Ɣ82D
Ɣ98F
Ɣ115E
Ɣ56D
Ɣ39A
Ɣ98I
Ɣ79F
Ɣ66E
Ŷ46E
Ŷ75F
Ŷ39D
Ŷ20B
Ŷ33G
Ɣ20E
Ɣ10A
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ŷ52E
Ŷ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ŷ52E
Ŷ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ŷ52E
Ŷ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ŷ52E
Ŷ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
Ɣ89H
Ŷ52G
Ŷ79F
Ɣ10B
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
167
D000
Ɣ Die drill
Ɣ Carbide-tipped
Ɣ Foret de matrice
Ɣ Taladro del dado
Ŷ
d1
Ø
Inch
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
168
d1
dec.
Inch
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
l2
Inch
1.1/2
1.1/2
1.3/4
1.3/4
2“
2“
2.1/4
2.1/4
2.1/2
2.1/2
2.3/4
2.3/4
3“
3“
3“
3“
l1
Inch
3.1/2
3.1/2
3.3/4
3.3/4
4“
4“
4.1/4
4.1/4
4.1/2
4.1/2
4.3/4
4.3/4
5“
5“
5.1/4
5.1/4
EDP #
or
e-Code
030011
030012
030013
030014
030015
030016
030017
030018
030019
030020
030021
030022
030023
030024
030025
030026
d1
Ø
Inch
27/64
7/16
29/64
15/32
31/64
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
d1
dec.
Inch
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
l2
Inch
3“
3“
3.1/4
3.1/4
3.1/2
3.1/2
3.1/2
3.1/2
4“
4“
4.1/2
4.1/2
4.3/4
4.3/4
l1
Inch
5.1/2
5.1/2
5.3/4
5.3/4
6“
6“
6“
6“
7“
7“
7.1/2
7.1/2
8“
8“
EDP #
or
e-Code
030027
030028
030029
030030
030031
030032
030034
030036
030038
030040
030042
030044
030046
030048
ŶŶ == EXCELLENT
EXCELLENT FOR
FORAPPLICATION
APPLICATION
ƔƔ == GOOD
GOOD FOR
FORAPPLICATION
APPLICATION
D444
Ɣ Jobber drill
Ɣ Carbide-tipped
Ɣ Foret court
D444
Ŷ
Ɣ
d1
Ø
Inch
32
1/8
30
29
9/64
25
5/32
21
20
19
18
11/64
17
15
14
13
3/16
11
10
9
7
13/64
3
7/32
1
15/64
B
C
E
1/4
F
G
d1
dec.
Inch
0.1160
0.1250
0.1285
0.1360
0.1406
0.1495
0.1562
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1800
0.1820
0.1850
0.1875
0.1910
0.1935
0.1960
0.2010
0.2031
0.2130
0.2188
0.2280
0.2344
0.2380
0.2420
0.2500
0.2500
0.2570
0.2610
l2
Inch
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.7/8
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/16
2.3/16
2.3/16
2.5/16
2.5/16
2.5/16
2.7/16
2.7/16
2.7/16
2.7/16
2.1/2
2.1/2
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
l1
Inch
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
3.1/8
3.1/4
3.1/4
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4“
4“
4.1/8
4.1/8
EDP #
or
e-Code
034632
034408
034630
034629
034409
034625
034410
034621
034620
034619
034618
034411
034617
034615
034614
034613
034412
034611
034610
034609
034607
034413
034603
034414
034601
034415
034502
034503
034505
034416
034506
034507
d1
Ø
Inch
17/64
H
I
J
K
9/32
L
19/64
N
5/16
O
P
21/64
Q
R
11/32
S
T
23/64
U
3/8
25/64
13/32
Z
27/64
7/16
29/64
15/32
31/64
1/2
d1
dec.
Inch
0.2656
0.2660
0.2720
0.2770
0.2810
0.2812
0.2900
0.2969
0.3020
0.3125
0.3160
0.3230
0.3281
0.3320
0.3390
0.3438
0.3480
0.3580
0.3594
0.3680
0.3750
0.3906
0.4062
0.4130
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
l2
Inch
2.7/8
2.7/8
2.7/8
2.7/8
2.15/16
2.15/16
2.15/16
3.1/16
3.1/16
3.3/16
3.3/16
3.5/16
3.5/16
3.7/16
3.7/16
3.7/16
3.1/2
3.1/2
3.1/2
3.5/8
3.5/8
3.3/4
3.7/8
3.7/8
3.15/16
4.1/16
4.3/16
4.5/16
4.3/8
4.1/2
l1
Inch
4.1/8
4.1/8
4.1/8
4.1/8
4.1/4
4.1/4
4.1/4
4.3/8
4.3/8
4.1/2
4.1/2
4.5/8
4.5/8
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
5“
5“
5.1/8
5.1/4
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
EDP #
or
e-Code
034417
034508
034509
034510
034511
034418
034512
034419
034514
034420
034515
034516
034421
034517
034518
034422
034519
034520
034423
034521
034424
034425
034426
034526
034427
034428
034429
034430
034431
034432
169
D555
Ɣ Taper length
Ɣ Carbide-tipped
Ɣ Foret queue
Ŷ
Ɣ
d1
Ø
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
170
d1
dec.
Inch
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3906
0.4062
0.4219
0.4375
0.4531
l2
Inch
2.3/4
3“
3“
3.3/8
3.3/8
3.5/8
3.5/8
3.3/4
3.3/4
3.7/8
3.7/8
4“
4“
4.1/8
4.1/8
4.1/4
4.1/4
4.3/8
4.3/8
4.5/8
4.5/8
4.3/4
l1
Inch
5.1/8
5.3/8
5.3/8
5.3/4
5.3/4
6“
6“
6.1/8
6.1/8
6.1/4
6.1/4
6.3/8
6.3/8
6.1/2
6.1/2
6.3/4
6.3/4
7“
7“
7.1/4
7.1/4
7.1/2
EDP #
or
e-Code
035508
035509
035510
035511
035512
035513
035514
035515
035516
035517
035518
035519
035520
035521
035522
035523
035524
035525
035526
035527
035528
035529
d1
Ø
Inch
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
13/16
7/8
15/16
1“
d1
dec.
Inch
0.4688
0.4844
0.5000
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
0.6406
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
0.8125
0.8750
0.9375
1.0000
l2
Inch
4.3/4
4.3/4
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
4.7/8
5.1/8
5.1/8
5.3/8
5.3/8
5.5/8
5.5/8
5.7/8
5.7/8
6.1/8
6.1/8
6.1/8
6.3/8
l1
Inch
7.1/2
7.3/4
7.3/4
8“
8“
8.1/4
8.1/4
8.3/4
8.3/4
8.3/4
8.3/4
9“
9“
9.1/4
9.1/4
9.1/2
9.1/2
9.3/4
9.3/4
10“
10“
10.3/4
11“
EDP #
or
e-Code
035530
035531
035532
035533
035534
035535
035536
035537
035538
035539
035540
035541
035542
035543
035544
035545
035546
035547
035548
035552
035556
035560
035564
ŶŶ == EXCELLENT
EXCELLENT FOR
FORAPPLICATION
APPLICATION
ƔƔ == GOOD
GOOD FOR
FORAPPLICATION
APPLICATION
76HA - 76LO - B76HA
Ɣ Center drill
Ɣ Regular length
Ɣ Foret à centrer
Ŷ
Ɣ
Nr.
000
00
0
1
2
3
d1
Ø
Inch
0.020
0.025
1/32
3/64
5/64
7/64
l2
Inch
0.030
0.030
0.038
3/64
5/64
7/64
l1
Inch
1.1/4
1.1/8
1.1/8
1.1/4
1.7/8
2“
d2
Ø
Inch
1/8
1/8
1/8
1/8
3/16
1/4
EDP #
or
e-Code
097630
097620
097610
097601
097602
097603
Nr.
4
5
6
7
8
d1
Ø
Inch
1/8
l2
Inch
1/8
l1
Inch
2.1/8
d2
Ø
Inch
5/16
EDP #
or
e-Code
097604
3/16
7/32
1/4
5/16
3/16
7/32
1/4
5/16
2.3/4
3“
3.1/4
3.1/2
7/16
1/2
5/8
3/4
097605
097606
097607
097608
76LO
Ɣ Center drill
Ɣ Extra length
Nr.
1
1
2
2
3
3
4
4
d1
Ø
Inch
3/64
3/64
5/64
5/64
7/64
7/64
1/8
1/8
Ɣ Foret à centrer
l2
Inch
3/64
3/64
5/64
5/64
7/64
7/64
1/8
1/8
l1
Inch
3“
4“
4“
5“
4“
5“
4“
5“
d2
Ø
Inch
1/8
1/8
3/16
3/16
1/4
1/4
5/16
5/16
EDP #
or
e-Code
097713
097714
097724
097725
097734
097735
097744
097745
Nr.
4
5
5
6
6
7
8
d1
Ø
Inch
1/8
3/16
3/16
7/32
7/32
1/4
5/16
l2
Inch
1/8
3/16
3/16
7/32
7/32
1/4
5/16
l1
Inch
6“
5“
6“
5“
6“
6“
6“
d2
Ø
Inch
5/16
7/16
7/16
1/2
1/2
5/8
3/4
EDP #
or
e-Code
097746
097755
097756
097765
097766
097776
097786
B76HA
Ɣ Center drill
Ɣ Bell type
Ɣ 60°/120° included countersink angle
Nr.
11
12
13
14
d1
Inch
3/64
1/16
3/32
7/64
l2
Inch
3/64
1/16
3/32
7/64
l1
Inch
1.1/4
1.7/8
2“
2.1/8
d2
Ø
Inch
1/8
3/16
1/4
5/16
d3
Ø
Inch
0.100
0.150
0.200
0.250
Ɣ Foret à centrer
EDP #
or
e-Code
097611
097612
097613
097614
Nr.
15
16
17
18
d1
Inch
5/32
3/16
7/32
1/4
l2
Inch
5/32
3/16
7/32
1/4
l1
Inch
2.3/4
3“
3.1/4
3.1/2
d2
Ø
Inch
7/16
1/2
5/8
3/4
d3
Ø
Inch
0.350
0.400
0.500
0.600
EDP #
or
e-Code
097615
097616
097617
097618
171
A217 - A218
Ɣ Center Drill
Ɣ Foret à centrer
A217
Ŷ
Ɣ
d1
dec.
Nr. Inch
l2
Inch
l1
ch
max
d2
Ø
T
Inch mm
EDP #
or
Stock # e-Code
d1
dec.
Nr. Inch
l2
Inch
l1
ch
max
d2
Ø
T
Inch mm
EDP #
or
Stock # e-Code
1
2
3
4
3/8
33/64
5/8
45/64
1.1/4
1.7/8
2“
2.1/8
3/64
5/64
7/64
1/8
0239216
0239223
0239230
0239247
5
6
7
8
1“
1“
1.13/16
1.11/32
2.3/4
3“
3.1/4
3.1/2
3/16
7/32
1/4
5/16
8.41
9.67
11.83
14.33
0239254
0239261
0239278
0239285
A217N5
A217N6
A217N7
A217N8
l1
Inch
2.3/4
3“
3.1/4
3.1/2
d2
Ø
Inch
3/16
7/32
1/4
516
max
T
mm
7.94
9.13
11.11
13.50
Stock #
0239339
0239346
0239353
0239360
EDP #
or
e-Code
A218N5
A218N6
A218N7
A218N8
0.0469
0.0781
0.1094
0.1250
2.33
3.58
4.83
5.92
A217N1
A217N2
A217N3
A217N4
0.1875
0.2188
0.2500
0.3125
A218
Ŷ
Ɣ
d1
dec.
Nr. Inch
1
0.0469
2
0.0781
3
0.1094
4
0.1250
172
l2
Inch
3/8
33/64
5/8
45/64
l1
Inch
1.1/4
1.7/8
2“
2.1/8
d2
Ø
Inch
3/64
5/64
7/64
1/8
max
T
mm
2.18
3.37
4.57
5.56
Stock #
0239292
0239308
0239315
0239322
EDP #
or
e-Code
A218N1
A218N2
A218N3
A218N4
d1
dec.
Nr. Inch
5
0.1875
6
0.2188
7
0.2500
8
0.3125
l2
Inch
1“
1“
1.13/64
1.11/32
ŶŶ == EXCELLENT
EXCELLENT FOR
FORAPPLICATION
APPLICATION
ƔƔ == GOOD
GOOD FOR
FORAPPLICATION
APPLICATION
A221 - A236
Ɣ Center Drill
Ɣ Foret à centrer
A221
Ŷ
Ɣ
d1
Ø
Nr. Inch
00 0.025
0 1/32
1 3/64
2 5/64
3 7/64
4 1/8
1)
d1
dec.
Inch
0.0250
0.0312
0.0469
0.0781
0.1094
0.1250
l2
Inch
0.030
0.038
3/64
5/64
7/64
1/8
l1
Inch
1.1/8
1.1/8
1.1/4
1.7/8
2“
2.1/8
d2
Ø
Inch
1/8
1/8
1/8
3/16
1/4
5/16
max
T
mm
2.83
2.83
2.71
4.19
5.47
6.90
Stock #
0241851
0241844
0241868
0241875
0241882
0241899
EDP #
or
e-Code
A221N00
A221N0
A221N1
A221N2
A221N3
A221N4
1)
1)
d1
Ø
Nr. Inch
5 3/16
6 7/32
7 1/4
8 5/16
d1
dec.
Inch
0.1875
0.2188
0.2500
0.3125
l2
Inch
3/16
7/32
1/4
5/16
l1
Inch
2.3/4
3“
3.1/4
3.1/2
d2
Ø
Inch
7/16
1/2
5/8
3/4
max
T
mm
9.86
11.35
14.20
17.16
Stock #
0241905
0241912
0241929
0241936
EDP #
or
e-Code
A221N5
A221N6
A221N7
A221N8
= Single End
A236
Ɣ Center Drill
Ɣ Foret à centrer
A236
Ŷ
Ɣ
Nr.
00
0
1
2
3
4
d2
Ø
Inch
1/8
1/8
1/8
3/16
1/4
5/16
d1
Ø
Inch
0.025
1/32
3/64
5/64
7/64
1/8
l2
Inch
0.030
0.038
3/64
5/64
7/64
1/8
l1
Inch
1.1/8
1.1/8
1.1/4
1.7/8
2“
2.1/8
max
T
mm
2.83
2.83
2.71
4.19
5.47
6.90
Stock #
0387931
0387948
0387955
0387962
0387979
0387986
EDP #
or
e-Code
A236N00
A236N0
A236N1
A236N2
A236N3
A236N4
Nr.
5
6
7
8
9
d2
Ø
Inch
7/16
1/2
5/8
3/4
7/8
d1
Ø
Inch
3/16
7/32
1/4
5/16
11/32
l2
Inch
3/16
7/32
1/4
5/16
11/32
l1
Inch
2.3/4
3“
3.1/4
3.1/2
3.9/16
max
T
mm
9.86
11.35
14.20
17.16
20.01
Stock #
0387993
0388006
0388013
0388020
0388037
EDP #
or
e-Code
A236N5
A236N6
A236N7
A236N8
A236N9
173
Spotting Drills
Ɣ Spotting Drill
Ŷ
Ɣ
SPS-120° Short Length
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
1“
d1
dec.
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
l1
Inch
2.1/2
3.1/8
3.3/4
4.3/8
5“
6“
EDP #
or
e-Code
087950
087951
087952
087953
087954
087955
SPR-120° Regular Length
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
1“
d1
dec.
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
l1
Inch
4“
5“
6“
7“
8“
8“
174
d1
dec.
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
l1
Inch
6“
7“
8“
9“
10“
10“
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
1“
d1
dec.
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
l1
Inch
2.1/2
3.1/8
3.3/4
4.3/8
5“
6“
EDP #
or
e-Code
087956
087957
087958
087959
087960
087961
SPRG-120° Regular Length
EDP #
or
e-Code
087962
087963
087964
087965
087966
087967
SPL-120° Long Length
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
1“
SPSG-120° Short Length
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
1“
d1
dec.
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
l1
Inch
4“
5“
6“
7“
8“
8“
EDP #
or
e-Code
087968
087969
087970
087971
087972
087973
SPLG-120° Long Length
EDP #
or
e-Code
087974
087975
087976
087977
087978
087979
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/4
3/8
1/2
5/8
3/4
1“
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
6“
7“
8“
9“
10“
10“
087980
087981
087982
087983
087984
087985
ŶŶ == EXCELLENT
EXCELLENT FOR
FORAPPLICATION
APPLICATION
ƔƔ == GOOD
GOOD FOR
FORAPPLICATION
APPLICATION
Spotting Drills
Ɣ Spotting drill
SPS-90° Short Length
SPSG-90° Short Length
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/4
3/8
1/2
5/8
3/4
1“
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
2.1/2
3.1/8
3.3/4
4.3/8
5“
6“
087900
087901
087902
087903
087904
087905
1/4
3/8
1/2
5/8
3/4
1“
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
2.1/2
3.1/8
3.3/4
4.3/8
5“
6“
087906
087907
087908
087909
087910
087911
SPR-90° Regular Length
SPRG-90° Regular Length
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/4
3/8
1/2
5/8
3/4
1“
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
4“
5“
6“
7“
8“
8“
087912
087913
087914
087915
087916
087917
1/4
3/8
1/2
5/8
3/4
1“
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
4“
5“
6“
7“
8“
8“
087918
087919
087920
087921
087922
087923
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/4
3/8
1/2
5/8
3/4
1“
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
6“
7“
8“
9“
10“
10“
087930
087931
087932
087933
087934
087935
SPL-90° Long Length
SPLG-90° Long Length
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/4
3/8
1/2
5/8
3/4
1“
0.2500
0.3750
0.5000
0.6250
0.7500
1.0000
3/4
1.1/8
1.3/8
1.5/8
1.7/8
2.1/4
6“
7“
8“
9“
10“
10“
087924
087925
087926
087927
087928
087929
ATR41
Ɣ Right-hand helix (taper 1/4” per foot)
Ɣ Notched point
d3
Aeronáutica
d2
d1
Ø
No.
1
2
d1
Ø
Inch
0.0810
0.1100
d2
Ø
Inch
0.0980
0.1280
l2
Inch
13/16
7/8
l1
Inch
2“
2.1/4
d3
Ø
Inch
0.0980
0.1280
# of
Flutes
3
3
EDP #
or
e-Code
041701
041702
d1
Ø
No.
3
4
d1
Ø
Inch
0.1650
0.2240
d2
Ø
Inch
0.1875
0.2500
l2
Inch
1.1/16
1.1/4
l1
Inch
2.1/2
2.3/4
d3
Ø
Inch
0.1875
0.2500
# of
Flutes
3
4
EDP #
or
e-Code
041703
041704
175
60B - SM8
Ɣ Drill blank
d1
Ø
Inch
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
Ɣ Broca sin mecanizar
Ɣ Ebauche pour foret
d1
dec.
Inch
0.0312
0.0469
0.0625
0.0781
0.0937
0.1094
0.125
0.1406
0.1562
0.1719
0.1875
0.2031
0.2187
0.2344
0.25
0.2656
0.2812
0.2969
0.3125
0.3281
0.3437
0.3594
l1
Inch
1.3/8
1.3/4
1.7/8
2“
2.1/4
2.5/8
2.3/4
2.7/8
3.1/8
3.1/4
3.1/2
3.5/8
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.1/2
4.5/8
4.3/4
4.7/8
EDP #
or
e-Code
019002
019003
019004
019005
019006
019007
019008
019009
019010
019011
019012
019013
019014
019015
019016
019017
019018
019019
019020
019021
019022
019023
d1
Ø
Inch
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
13/16
7/8
15/16
1“
d1
dec.
Inch
0.375
0.3906
0.4062
0.4219
0.4375
0.4531
0.4687
0.4844
0.5
0.5312
0.5625
0.5938
0.625
0.6562
0.6875
0.7188
0.75
0.8125
0.875
0.9375
1
l1
Inch
5“
5.1/8
5.1/4
5.3/8
5.1/2
5.5/8
5.3/4
5.7/8
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
EDP #
or
e-Code
019024
019025
019026
019027
019028
019029
019030
019031
019032
019034
019036
019038
019040
019042
019044
019046
019048
019052
019056
019060
019064
SM8
Ɣ Stub drill
Ɣ Double end
d1
Ø
7/64
1/8
30
9/64
176
d1
Ø
mm
2.778
3.175
3.264
3.572
Ɣ Broca extra corta - Doble punta
Ɣ Foret extra-court - Double
d1
dec.
Inch
0.1094
0.1250
0.1285
0.1406
l2
Inch
1/2
1/2
1/2
1/2
l1
Ø
Inch
1.7/8
2“
2“
2“
EDP #
or
e-Code
098907
098908
098930
098909
d1
Ø
5/32
3/16
11
1/4
d1
Ø
mm
3.969
4.762
4.851
6.350
d1
dec.
Inch
0.1562
0.1875
0.1910
0.2500
l2
Inch
1/2
1/2
1/2
1/2
l1
Ø
Inch
2.1/16
2.3/16
2.1/4
2.1/2
EDP #
or
e-Code
098910
098912
098911
098916
Threaded Hex Shank Drills
Ɣ Threaded hex shank drills
Ɣ Tyoe B
TS40 Stub
TS10 Short
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
d1
dec.
Inch
0.125
0.1562
0.1875
0.2188
0.25
l2
Inch
9/16
9/16
9/16
9/16
9/16
l1
Inch
1.1/4
1.1/2
1.1/2
1.1/2
1.1/4
EDP #
or
e-Code
045708
045710
045712
045714
045716
TS18 Short
d1
Ø
Inch
40
30
21
20
11
10
d1
dec.
Inch
0.098
0.1285
0.159
0.161
0.191
0.1935
l2
l1
Inch
9/16
9/16
9/16
9/16
9/16
9/16
Inch
1“
1.1/4
1.1/4
1.1/4
1.1/2
1.1/4
l2
l1
Inch
9/16
Inch
1.1/2
EDP #
or
e-Code
045640
045630
045621
045620
045611
045610
d1
Ø
Inch
1/8
d1
dec.
Inch
0.125
l2
l1
Inch
5/16
Inch
1/2
l2
l1
Inch
5/16
5/16
5/16
5/16
5/16
Inch
1/2
9/16
9/16
9/16
9/16
EDP #
or
e-Code
045808
TS41 Stub
d1
Ø
Inch
40
30
20
11
10
d1
dec.
Inch
0.098
0.1285
0.161
0.191
0.1935
EDP #
or
e-Code
045840
045830
045820
045811
045810
TS15 Short
d1
Ø
Inch
F
d1
dec.
Inch
0.257
EDP #
or
e-Code
045606
TS52 Long
TS51 Long
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
d1
dec.
Inch
0.125
0.1562
0.1875
0.2188
0.25
l2
Inch
7/8
1.1/8
1.1/8
1.1/8
1.1/8
l1
Inch
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
EDP #
or
e-Code
017958
017960
017962
017964
017966
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
40
30
21
20
11
10
0.0980
0.1285
0.1590
0.1610
0.1910
0.1935
7/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
017940
017930
017921
017920
017911
017910
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
0.257
1.1/8
2.1/8
017990
TS55 Long
d1
Ø
Inch
F
177
Drill Sets
Ɣ Drill Sets
Ɣ Juego de Brocas, serie corta
Ɣ Coffret de forets courts
Jobber Drill Sets
Style
Tool Type
# in
Set
Sizes
EDP #
C13R10P
C15R10P
C21R10P
C29R10P
C20R18P
C60R18P
C26R15P
C15L10
C29L10
C115COMBP
C114COMBP
C25R10PM
C50R10PM
R10P
R10P
R10P
R10P
R18P
R18P
R15P
L10
L10
R10P, R18P, R15P
R10P, R18P, R10PM
R10PM
R10PM
13
15
21
29
20
60
26
15
29
115
114
25
50
1/16-1/4 x 64ths
1/16-1/2 x 32nds
1/16-3/8 x 64ths
1/16-1/2 x 64ths
61-80
1-60
A-Z
1/16-1/2 x 32nds, LEFT HAND
1/16-1/2 x 64ths, LEFT HAND
1/16-1/2 x 64ths, 1-60, A-Z
1/16-1/2 x 64ths, 1-60, 1-13mm x .5 mm
1mm-13mm x .5mm
1mm-5.9mm x .1mm
090164
090163
090165
090162
090161
090101
090126
099955
099935
090123
090114
099994
099997
Style
Tool Type
# in
Set
Sizes
EDP #
C13R10
C15R10
C21R10
C29R10
C20R18
C60R18
C26R15
C115COMB
C114COMB
R10
R10
R10
R10
R18
R18
R15
R10, R18, R15
R10, R18, 2AB
13
15
21
29
20
60
26
115
114
1/16-1/4 x 64ths
1/16-1/2 x 32nds
1/16-3/8 x 64ths
1/16-1/2 x 64ths
61-80
1-60
A-Z
1/16-1/2 x 64ths, 1-60, A-Z
1/16-1/2 x 64ths,1-60, 1-13mm x .5 mm
099979
099978
099980
099977
099981
099976
099983
099982
099990
Style
Tool Type
# in Set Sizes
EDP #
C13R10CO
C15R10CO
C21R10CO
C29R10CO
C60R18CO
C26R15CO
C115COMBC
C114COMBC
R10CO
R10CO
R10CO
R10CO
R18CO
R15CO
R10CO, R18CO, R15CO
R10CO, R18CO, 2ACO
13
15
21
29
60
26
115
114
099944
090291
099701
090290
090600
090292
099706
099705
178
1/16-1/2 x 64ths
1/16-1/2 x 32nds
1/16-3/8 x 64ths
1/16-1/2 x 64ths
1-60
A-Z
1/16-1/2 x 64ths, 1-60, A-Z
1/16-1/2 x 64ths, 1-60, 1-13mm x .5 mm
Drill Sets
Ɣ Drill Sets
Jobber Drill Sets
Style
Tool Type
# in Set
Sizes
EDP #
C29HX10
HX10
29
1/16-1/2 x 64ths 091010
A097
Style
Tool Type
# in Set Sizes
Stock # EDP #
18
20
60
12
14
30
A012
A012
A012
A012
A012
A012
29
15
13
60
26
115
0574317
0574348
0574355
0574324
0574331
0574362
1/16 - 1/2 x 1/64
1/16 - 1/2 x 1/32
1/16 - 1/4 x 1/64
Nr.1 - Nr.60
A-Z
1/16 - 1/2 x 1/64, Nr.1 - Nr.60, A-Z
A09718
A09720
A09760
A09712
A09714
A09730
A190
Style Tool Type
# in Set
Sizes
Stock # EDP #
3
200
201
202
203
204
21
24
19
51
41
25
1/16 - 3/8 x 1/64
1.0 mm - 10.5 mm x 0.5 mm + 3.3 - 4.2 - 6.8 - 10.2 mm
1.0 mm - 10.0 mm x 0.5 mm
1.0 mm - 6.0 mm x 0.1 mm
6.0 mm - 10.0 mm x 0.1 mm
1.0 mm - 13.0 mm x 0.5 mm
0179413
0030530
0030547
0030554
0030561
0030578
A100
A100
A100
A100
A100
A100
A1903
A190200
A190201
A190202
A190203
A190204
A191
Style
Tool Type
# in Set Sizes
Stock #
EDP #
31M
61/80
413
419
A100
A100
A100
A100
20
20
13
19
0149133
0179499
0030608
0030615
A19131M
A19161-80
A191413
A191419
0.3 mm - 1.0 mm x 0.05 mm + 0.38 - 0.52 - 0.58 - 0.78 - 0.82 mm
Nr.61 - Nr.80
1.5 mm - 6.5 mm x 0.5 mm + 3.3 - 4.2 mm
1.0 mm - 10.0 mm x 0.5 mm
179
Drill Sets
Ɣ Drill Sets
Stub Drill Sets
Style
Tool Type # in Set
Sizes
EDP #
C29R40
C60R41
C26R42
R40
R41
R42
1/16-1/2 x 64ths
1-60
A-Z
090170
090174
090173
29
60
26
Style
Tool Type # in Set Sizes
EDP #
C29R40C
C60R41C
R40C
R41C
099903
099930
29
60
1/16-1/2 x 64ths
1-60
Style
Tool Type
# in Set
Sizes
EDP #
C29M40CO
C60M41CO
C26M42CO
M40CO
M41CO
M42CO
29
60
26
1/16-1/2 x 64ths
1-60
A-Z
099962
099960
099961
180
Drill Sets
Ɣ Drill Sets
Taper Length Drill Sets
Style
Tool Type # in Set Sizes
EDP #
C29R51
C60R52
R51
R52
090154
090155
29
60
1/16-1/2 x 64ths
1-60
Taper Shank Drill Sets
Style
Tool Type
C16A209
C16B209
209
209
# in
Set
16
16
Sizes
EDP #
33/64-3/4 x 64ths
49/64-1“ x 64ths
090131
090133
Reduced Shank Drill Sets
Style
Tool Type
# in Set Sizes
EDP #
C8R56
C8R57
C33R56
R56
R57
R56
8
8
33
090556
090558
090231
Style
Tool Type
# in Set Sizes
EDP #
8
090328
C8R56CO R56CO
1/2“ Reduced Shank, 9/16-1“ x 16ths, S&D
1/2“ Reduced Shank, 9/16-1“ x 16ths, S&D
1/2“ Reduced Shank, 1/2-1“x 64ths, S&D
1/2“ Reduced Shank, 9/16-1“
x16ths, Silver & Deming
181
Tap Table of Contents
Page
202
203
204
205
206
207
208
209
210
Tap Technical Charts
Threading with Taps
Icon Guide for Taps
Tap Drill Sizes for Metric M-Profile Screw Threads
Tap Drill Sizes for Forming Taps
Forming Tap Drill Sizes for Self-Locking Threads
Tap Projection and Hole Size for Pipe Taps
Tap Size Recommendations for Classes 2B and 3B
Unified Screw Thread Limits
Tapping Speeds
Style
Standard
Thread
Designation
Description
Finish
Straight Flute
1500(UNC)
1500(UNF)
1500(UNS)
1500A(UNC)
1500A(UNF)
1500L(UNC)
1500L(UNF)
1500L(UNS)
1500OV(UNC)
1500S
1505(UNC)
1505(UNS)
1508(UNC)
1508(UNF)
1519(UNC)
1528(UNC)
1528(UNF)
1528(UNS)
1528S
1572(UNC)
1572(UNF)
1595(UNC)
1595(UNF)
1599(M)
1599(UNC)
1599(UNF)
1599SB(M)
1600(UNC)
1600(UNF)
1700(M)
1700S
E053
E054
E059
E061
E071
E500
E501
E513
T100
T110
TN1500(UNC)
TN1500(UNF)
U1511
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ISO
ISO
ISO
ANSI
ANSI
ISO
ISO
ISO
DIN
DIN
ANSI
ANSI
ANSI
UNC
UNF
UNS
UNC
UNF
UNC
UNF
UNS
UNC
Sets
UNC
UNS
UNC
UNF
UNC
UNC
UNF
UNS
Sets
UNC
UNF
UNC
UNF
Metric
UNC
UNF
Metric
UNC
UNF
Metric
Metric
Metric
Metric
UNC
UNC
UNF
Metric
Metric
Metric
Metric
Metric
UNC
UNF
UNC
Hand Tap
Hand Tap
Hand Tap
Hand Tap
Hand Tap
Left Hand
Left Hand
Left Hand
Hand Tap, oversize .005”
Hand Tap set, 3-piece
Hand Tap, 8-Pitch
Hand Tap, 8-Pitch
Hand Tap, Optional Flutes
Hand Tap, Pulley style
Hand Tap
Hand Tap
Hand Tap
Hand Tap, Screw Thread Insert (STI)
Hand Tap, Screw Thread Insert (STI)
Hand Tap, Cast iron
Hand Tap, Cast iron
Hand Tap, Cast iron
Hand Tap, Cast Iron, Semi-Bottoming
Hand Tap, Cast iron
Hand Tap, Cast iron
Hand Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT, Hand Tap
MTT, Hand Tap
Machine Tap, Straight Flute
Carbide
Carbide
Hand Tap
Hand Tap
Hand Tap, Nut style
Bright
Bright
Bright
ST
ST
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Nitride, ST
Nitride, ST
Nitride, ST
Nitride, ST
Nitride, ST
Nitride, ST
Bright
Bright
TiAlN
TiAlN
TiAlN
Gold
Gold
Bright
Bright
Bright
TiAlN
TiAlN
TiN
TiN
Bright
182
Page
No.
220
222
223
228
228
230
230
231
231
224
234
235
232
232
238
216
218
218
219
236
237
233
233
241
240
240
241
239
239
225
227
242
243
242
212
214
244
247
248
211
211
229
229
237
Tap Table of Contents (con‘t)
Style
Standard
Thread
Designation
Description
Finish
Spiral Point
1534(UNC)
1534(UNF)
1534NE(UNC)
1534NE(UNF)
1534NR(UNC)
1534NR(UNF)
1534NR(UNS)
1578(UNC)(UNF)
1585(UNC)
1585(UNF)
1585A(UNC)
1585A(UNF)
1585NR(UNC)
1585NR(UNF)
1585OV(UNC)
1593(UNC)(UNF)
1634(UNC) (UNF)
1785M
1785NR
1985(UNC)
1985(UNF)
E000
E001
E005
E006
E010
E011
E015
E016
E025
E026
E035
E036
E045
E046
E049
E055
E057
E060
TN1534(UNC)
TN1534(UNF)
TN1585 (UNC)
TN1585(UNF)
TN1785
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ISO
ISO
ANSI
ANSI
ISO
ISO
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ISO
ISO
ISO
ISO
ISO
ISO
ANSI
ANSI
ANSI
ANSI
ANSI
UNC
UNF
UNC
UNF
UNC
UNF
UNS
UNC
UNC
UNF
UNC
UNF
UNC
UNF
UNC
UNC
UNC
Metric
Metric
UNC
UNF
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
UNC
UNC
UNF
UNF
Metric
Metric
Metric
UNC
UNC
UNF
UNC
UNF
UNC
UNF
Metric
Relieved Style
Relieved Style
Extension Non-Relieved Style
Extension Non-Relieved Style
Non-Relieved Style
Non-Relieved Style
Non-Relieved Style
Screw Thread Insert (STI)
Relieved Style
Relieved Style
Relieved Style
Relieved Style
Non-Relieved Style
Non-Relieved Style
Relieved Style, .005” oversize
Relieved Style, .003”/.0035 oversize
Relieved Style
Relieved Style
Non-Relieved Style
Relieved Style, DDX, High Hook
Relieved Style, DDX, High Hook
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
Relieved Style
Relieved Style
Relieved Style
Relieved Style
Relieved Style
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
ST
ST
Bright
Bright
Bright
Bright
Gold
Bright
Bright
ST
ST
Gold
ST
Gold
ST
Gold
ST
Gold
ST
Gold
ST
Gold
ST
ST
Gold
Gold
ST
Gold
ST
TiN
TiN
TiN
TiN
TiN
Page
No.
266
267
283
283
276
277
277
284
270
271
272
272
278
279
281
280
268
275
282
274
274
259
260
256
257
261
262
258
258
252
254
253
255
263
264
263
264
265
265
269
269
273
273
275
183
Tap Table of Contents
Style
Spiral Flute
1582(UNC)
1582(UNF)
1586(UNC)
1586(UNF)
1587(UNC)
1587(UNF)
1588(UNC)
1588(UNF)
1590(UNC)
1590(UNF)
1591(UNC)
1591(UNF)
1788(M)
E002
E003
E007
E008
E012
E013
E017
E018
E027
E028
E037
E038
E044
E048
E050
E051
E052
E058
E069
E079
E085
Thread Forming
1580(M)
1580(UNC)
1580(UNF)
3300(M)
3300(UNC)
3300(UNF)
3306E(UNC)
3306E(UNF)
E009
E029
E039
E064
E074
E080
E094
E097
E098
E099
184
(con‘t)
Standard
Thread
Designation
Description
Finish
Page
No.
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ISO
ISO
ANSI
ANSI
ISO
ISO
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ISO
ISO
ISO
ISO
ISO
ISO
ANSI
ANSI
ANSI
UNC
UNF
UNC
UNF
UNC
UNF
UNC
UNF
UNC
UNF
UNC
UNF
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
UNC
UNC
UNF
UNF
Metric
Metric
Metric
Metric
Metric
UNC
UNC
UNF
Metric
Machine Tap
Machine Tap
Machine Tap
Machine Tap
Machine Tap, High Spiral Helicut, 52°
Heavy-Duty, High Spiral Flute
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
ST
ST
ST
ST
Bright
Gold
ST
Gold
ST
Gold
ST
Gold
ST
Gold
ST
Gold
ST
Gold
Super B
TiAlN
TiAlN
Gold
TiAlN
ST
ST
ST
301
301
302
302
303
303
304
304
306
306
307
307
305
294
295
291
291
296
297
292
292
285
286
287
288
299
299
298
298
300
300
289
290
293
Rol-Rite™, Thread Forming
Rol-Form™, Thread Forming
Rol-Form™, Extension Style, Thrd Form
Rol-Form™, Extension Style, Thrd Form
MTT-X, Thread Forming
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
TiN
TiN
TiN
Gold
Gold
Dialub
Gold
CrN
TiN
TiN
316
314
315
319
317
318
320
321
310
308
309
309
310
313
311
311
312
312
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ISO
ANSI
ISO
ISO
ISO
Metric
UNC
UNF
Metric
UNC
UNF
UNC
UNF
Metric
UNC
UNF
UNC
UNF
Metric
Metric
Metric
Metric
Metric
Tap Table of Contents (con‘t)
Style
Pipe Taps
1541(NPT)
1542(NPS)
1543(NPTF)
1544(NPT)
1545(NPT)
1545A(NPT)
1546(NPTF)
1548(NPT)
1549(NPTF)
1567(NPTF)
1568(NPT)
1592(NPSF)
E040
E041
E042
E043
E547
E550
E710
TN1541
TN1543
Miscellaneous
1994(UNC)
1994(UNF)
E650
E651
E653
229C
1215
1301
3850
Dies
2010
2025
2025S
2325M
2510
2710M
3150
Standard
Thread
Designation
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ISO
ISO
ISO
ISO
ISO
ISO
ANSI
ANSI
ANSI
NPT
NPSM
NPTF
NPT
NPT
NPT
NPTF
NPT
NPTF
NPTF
NPT
NPSF
G
G
G
G
G
Rc
NPT
NPT
NPTF
ANSI
ANSI
ISO
ISO
ANSI
ANSI
ANSI
ANSI
ANSI
UNC
UNF
Metric
UNC
NPT
N/A
N/A
N/A
N/A
UNC, UNF, UNS, NPT
UNC, UNF, UNS, NPT
Sets
Metric
UNC, UNF
Metric
Tap/Round Die Sets
Finish
Page
No.
Medium Hook, Straight Flute
Straight, Regular Thread
Taper, Low Rake Angle
Taper, High Hook
Taper, High Hook
Taper, High Hook
Taper, Medium Hook, 30° Spiral Flute
Taper, Medium Hook, 30° Spiral Flute
Taper, Interrupted Thread
Taper, Interrupted Thread
Straight, Dryseal, Regular Thread
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
MTT-X, Machine Tap
Machine Tap, (BSPF)
Machine Tap, (BSPT)
Pipe Tap
Bright
Bright
Bright
Nitride
Bright
ST
Bright
Bright
Bright
Bright
Bright
Bright
Gold
ST
Gold
ST
Bright
Bright
Bright
TiN
TiN
323
329
324
325
325
326
326
328
328
327
327
329
330
330
331
331
332
333
322
323
324
Combination Drill/Tap
Drill/Tap Set, 9-Piece
T-Handle Tap Wrench
Die stock
Straight-Handle Tap Wrench
Bright
Bright
ST
ST
Bright
Bright
N/A
N/A
N/A
334
334
335
335
336
337
337
338
338
Description
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
HSS
HSS
Carbon Steel, HSS
Bright
Bright
Bright
Bright
Bright
Bright
Bright
341
339
340
340
342
343
344
185
Straight Flute Taps
Style:
Thread Form:
T100
T110
E061, E071
AMG Chart below.
2 Use the icons to find Hole Type and other Product Features.
3 Locate your Best Product Choices and Surface Feet per Minute
(SFM). example:
72
72 = SFM
Ŷ = Excellent for Application
Ɣ = Good for Application
4
NOTE: Additional cutting charts located
on pages 204-210.
Tool Brand:
Tool Material:
Standard:
2
Direction:
Through/Blind Hole:
Tolerance:
Depth:
Chamfer:
Thread Designation:
Coolant:
1
Hardness
Hardness
HB
HB
2.Stainless
Steel
3.Cast Iron
1.4 Alloy steel
2.2 Austenitic
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
4.Titanium
186
3
Surface Feet Per Minute (SFM)
= Good
= Excellent
1. Steel
Straight Flute Taps
Finish/Coating:
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
<120
<120
<200
<200
<250
<250
<250
<250
>250<350
>250<350
>350
>350
49-55HRC
49-55HRC
55-63HRC
55-63HRC
<250
<250
<250
<250
<300
<300
<300
<300
<150
<150
>150<300
>150<300
<200
<200
>200<300
>200<300
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
211
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
211
212-215
Ɣ72
Ɣ66
Ɣ52
Ɣ39
Ɣ23
Ɣ13
Ŷ20
Ɣ13
Ɣ197
Ɣ98
Ɣ20
Ŷ13
Ŷ39
Ŷ23
Ŷ33
Ŷ16
Ɣ39
Ɣ98
Ɣ66
Ɣ23
Ɣ197
Ɣ66
Ŷ49
Ɣ164
Ɣ98
Ɣ39
Ɣ23
Ɣ82
Straight Flute Taps (con‘t)
1528
1500
1500
1700
1500A
TN1500
1500L
1500OV
1508
1595
1505
1572
U1511
Straight Flute Taps
1528
216-218
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
218
220-223
223
225-
228
229
230-231
231
232
233
234-235 236-237
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ59
Ɣ46
Ɣ30
Ɣ30
Ɣ20
Ɣ10
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ŷ66
Ŷ59
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ49
Ɣ30
Ɣ26
Ɣ26
Ɣ20
Ɣ13
Ɣ13
Ɣ20
Ɣ13
Ɣ13
Ɣ20
Ɣ13
Ɣ13
Ɣ20
Ɣ13
Ɣ13
Ɣ20
Ɣ13
Ɣ13
Ɣ20
Ɣ13
Ɣ13
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ13
Ɣ13
Ɣ20
Ɣ13
Ɣ13
Ɣ20
Ɣ13
Ɣ13
Ɣ30
Ɣ20
Ɣ20
Ɣ20
Ɣ13
Ɣ13
Ɣ16
Ɣ7
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ49
Ɣ30
Ɣ30
Ɣ16
Ɣ20
Ɣ16
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ16
Ɣ23
Ɣ16
Ɣ23
Ɣ16
Ɣ23
Ɣ16
Ɣ23
Ɣ16
Ɣ23
Ɣ16
Ɣ23
Ɣ20
Ɣ10
Ɣ16
Ɣ23
Ɣ16
Ɣ23
Ɣ16
Ɣ23
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ26
Ɣ79
Ɣ59
Ɣ10
Ɣ49
Ɣ98
Ɣ75
Ɣ20
Ɣ30
Ɣ16
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
237
Ɣ39
Ɣ33
Ɣ26
Ɣ20
Ɣ16
Ɣ46
Ɣ26
Ɣ39
Ɣ16
Ɣ23
Ŷ26
Ŷ66
Ŷ49
Ŷ39
Ŷ79
Ŷ59
Ɣ16
Ɣ52
Ɣ39
Ɣ66
Ɣ39
Ɣ26
187
Straight Flute Taps
1519
Style:
Thread Form:
1600
1599
1599SB
AMG Chart below.
(SFM). example:
72
72 = SFM
4
NOTE: Additional cutting charts located
on pages 204-210.
Tool Brand:
Tool Material:
Standard:
2
Direction:
Through/Blind Hole:
Tolerance:
Depth:
Chamfer:
Thread Designation:
Coolant:
1
Hardness
Hardness
HB
HB
2.Stainless
Steel
3.Cast Iron
1.4 Alloy steel
2.2 Austenitic
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
4.Titanium
188
3
= Good
= Excellent
1. Steel
Straight Flute Taps
Finish/Coating:
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
<120
<120
<200
<200
<250
<250
<250
<250
>250<350
>250<350
>350
>350
49-55HRC
49-55HRC
55-63HRC
55-63HRC
<250
<250
<250
<250
<300
<300
<300
<300
<150
<150
>150<300
>150<300
<200
<200
>200<300
>200<300
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
238
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
239
240-241
241
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ20
Ɣ13
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ŷ49
Ŷ36
Ŷ36
Ŷ20
Ŷ49
Ŷ36
Ŷ36
Ŷ20
Ŷ49
Ŷ36
Ŷ36
Ŷ20
Ɣ13
Ɣ13
Ɣ13
Ɣ13
Ɣ13
Ɣ13
Ɣ16
Ɣ7
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
Straight Flute Taps (con‘t)
E053
E054
E500
E501
E513
E025
E035
E026
E036
E005
E006
E015
E016
Straight Flute Taps
Spiral Point Taps
E059
242
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
242
243
244-247
Ɣ23
Ɣ20
Ɣ16
Ɣ13
Ɣ10
Ŷ72
Ŷ59
Ŷ82
Ɣ59
Ŷ72
Ŷ59
Ŷ82
Ɣ59
Ŷ72
Ŷ59
Ŷ82
Ɣ59
Ɣ39
Ɣ23
Ɣ33
Ɣ16
247
Ɣ23
Ɣ20
Ɣ16
Ɣ13
Ɣ10
Ɣ39
Ɣ23
Ɣ33
Ɣ16
248-251
Ɣ23
Ɣ20
Ɣ16
Ɣ13
Ɣ10
Ɣ39
Ɣ23
Ɣ33
Ɣ16
Ɣ13
Ɣ13
Ɣ33
Ɣ23
Ɣ7
Ɣ13
Ɣ33
Ɣ23
Ɣ7
Ɣ13
Ɣ33
Ɣ23
Ɣ7
Ɣ39
Ɣ23
Ɣ16
Ɣ39
Ɣ23
Ɣ16
Ɣ39
Ɣ23
Ɣ16
Ɣ16
Ɣ10
Ɣ16
Ɣ10
Ɣ16
Ɣ10
Ɣ98
Ɣ98
Ɣ98
Ɣ13
Ɣ13
Ɣ66
Ɣ66
Ɣ66
Ŷ49
Ŷ49
Ŷ49
252
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
253
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
254
255
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ŷ26
Ŷ23
Ɣ16
Ŷ26
Ŷ23
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ49
Ɣ26
256
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
257
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
258
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ŷ26
Ŷ23
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ŷ26
Ŷ23
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ɣ39
Ɣ16
Ɣ39
Ɣ16
Ɣ39
Ɣ16
Ŷ39
Ɣ98
Ŷ66
Ŷ39
Ɣ98
Ŷ66
Ŷ39
Ɣ98
Ŷ66
Ŷ39
Ɣ98
Ŷ66
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
258
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
189
Spiral Point Taps
Style:
Thread Form:
E000
E001
E010
E011
E045
AMG Chart below.
3 Locate your Best Product Choices and Surface Feet
per Minute (SFM). example:
72
72 = SFM
4 NOTE: Additional cutting charts located on
pages 204-210.
Tool Brand:
Tool Material:
Finish/Coating:
Direction:
Through/Blind Hole:
Tolerance:
Depth:
Chamfer:
Flute Form:
Coolant:
Application
Material Groups
Groups (AMG)
(AMG) With Examples
1
1.2 Magnetic
Structural Steel/
case carburising steel
1.1
1.1 Magnetic soft
soft steel
steel
1.3 Structural
Plain Carbon steel
1.2
1.2 Structural Steel/
Steel/ case
case carburising
carburising steel
steel
1.4 Alloy
steel
1.3
1. Steel
1.3 Plain
Plain Carbon
Carbon steel
steel
1.5 Alloy
Alloy steel
steel/ Hardened and tempered steel
1.4
1.4 Alloy steel
1.
1. Steel
Steel
1.6
Alloy steel/
Hardened and
tempered steel
1.5
1.5 Alloy
Alloy steel/
steel/ Hardened
Hardened and
and tempered
tempered steel
steel
1.7
Alloy steel
Hardened and tempered steel
1.6
1.6 Alloy
Alloy steel/
steel/ Hardened
1.8
Alloy
steel
Hardened
1.7
1.7 Alloy
Alloy steel
steel Hardened
Hardened
2.1
Free machining
Stainless Steel
1.8
1.8 Alloy
Alloy steel
steel Hardened
Hardened
2.Stainless
2.2 Austenitic
2.1
Free
machining
Steel
2.1 Free machining Stainless
Stainless Steel
Steel
2.Stainless
2.3 Austenitic
Ferritic + Austenitic, Martensitic
2.Stainless
2.2
2.2 Austenitic
Steel
Steel
2.4 Ferritic
Precipitation
Hardened
2.3
+
Austenitic,
Martensitic
3.1 Precipitation
Lamellar graphite
2.4
Hardened
3.2
Lamellar graphite
3.1
3.Cast Iron
3.1 Lamellar
Lamellar graphite
graphite
3.3
Nodular
graphite/
Malleable Cast Iron
3.2
3.2 Lamellar
Lamellar graphite
graphite
3.Cast
3.Cast Iron
Iron
3.4
Nodular graphite/
Malleable Cast
Iron
3.3
3.3 Nodular
Nodular graphite/
graphite/ Malleable
Malleable Cast
Cast Iron
Iron
4.1 Titanium,
unalloyed
3.4
Nodular
graphite/
Malleable
Cast
Iron
4.Titanium
4.2 Titanium,
Titanium, alloyed
4.1
unalloyed
4.3 Titanium,
Titanium, alloyed
alloyed
4.Titanium
4.2
4.Titanium
5.1 Titanium,
Nickel, unalloyed
4.3
alloyed
5.Nickel
5.2 Nickel,
Nickel, alloyed
5.1
unalloyed
5.3
Nickel,
alloyed
5.Nickel
5.2
5.Nickel
5.2 Nickel,
Nickel, alloyed
alloyed
6.1
Copperalloyed
5.3
5.3 Nickel,
Nickel, alloyed
6.2
ß-Brass,
Bronze
6.1
6.Copper
6.1 Copper
Copper
6.3 ß-Brass,
Į-Brass Bronze
6.2
6.Copper
6.Copper
6.4 Į-Brass
High Strength Bronze
6.3
6.3 Į-Brass
7.1 Al,
Mg, unalloyed
6.4
6.4 High
High Strength
Strength Bronze
Bronze
7.2 Al,
Al alloyed,
Si<0.5%
7.Aluminium 7.1
7.1 Al, Mg,
Mg, unalloyed
unalloyed
Magnesium
7.3
Al
alloyed,
Si>0.5%<10%
7.2
Al
alloyed,
Si<0.5%
7.Aluminium
7.4 Al
alloyed, Si>10%
Mg alloys
Magnesium
Magnesium 7.3
7.3 Al
Al alloyed,
Si>0.5%<10%
8.1
Thermoplastics
7.4
7.4 Al
Al alloyed,
alloyed, Si>10%
Si>10% Mg
Mg alloys
alloys
8.Synthetic
8.2
8.1
Materials
8.1 Thermoplastics
Thermoplastics
8.Synthetic
8.3 Thermosetting
Reinforced plastic materials
8.Synthetic
8.2
plastics
Materials
Materials
9.Hard
Mat.
9.1 Reinforced
Cermets (Metal-ceramics)
8.3
8.3 Reinforced plastic
plastic materials
materials
10.Graphite
10.1Cermets
Standard
graphite
9.Hard
Mat.
9.1
(Metal-ceramics)
9.Hard Mat.
10.Graphite
10.1
Standard
graphite
10.Graphite
190
12L14, 12L15
1005-1025,
1214, 1215, A36
12L14,
12L14, 12L15
12L15
1030-1060, 1214,
1050-1060, 1144-1146
1005-1025,
1005-1025, 1214, 1215,
1215, A36
A36
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
1030-1060,
1030-1060, 1050-1060,
1050-1060, 1144-1146
1144-1146
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
A2-D2,
H10-H41, L1-L6, M1-M42, T1
4140,4340,52100,8620
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
A2-D2,
H10-H41,
L1-L6,
M1-M42, T1
A2-D2,
A2-D2, H10-H41,
H10-H41, L1-L6,
L1-L6, M1-M42,
M1-M42, T1
T1
200,
303,
416,
420F,
430F,
440
A2-D2,
H10-H41,
L1-L6,
A2-D2, H10-H41, L1-L6, M1-M42,
M1-M42, T1
T1
301, 303,
302, 304, 420F,
316, 321, 330,
CUSTOM 455, AM-350
200,
200, 303, 416,
416, 420F, 430F,
430F, 440
440
318-329,
400-446,
15-4PH,
17-4PH.
DUPLEXAM-350
301,
302,
304,
316,
321,
330,
CUSTOM
301, 302, 304, 316, 321, 330, CUSTOM 455,
455, AM-350
15-5PH,
Custom 450
17-4PH
318-329,
318-329, 400-446,
400-446, 15-4PH,
15-4PH, 17-4PH.
17-4PH. DUPLEX
DUPLEX
Grey, G10,
Gg40,450
J431C,
A48 CLASS 20
15-5PH,
Custom
17-4PH
Grey,
GG25-Gg40,
J158, A48 CLASS
40-60
Grey,
Grey, G10,
G10, Gg40,
Gg40, J431C,
J431C, A48
A48 CLASS
CLASS 20
20
A220,
A436, A439, A602, A48
Black, GGG40-GGG70
Grey,
Grey, GG25-Gg40,
GG25-Gg40, J158,
J158, A48 CLASS
CLASS 40-60
40-60
Black
Gts/Gtw,
J434C
A220,
A220, A436,
A436, A439,
A439, A602,
A602, Black,
Black, GGG40-GGG70
GGG40-GGG70
Commercially
Pure
Black
Black Gts/Gtw,
Gts/Gtw, J434C
J434C
6A14V, 6A14V-2Sn,
Monel, Monel K
Commercially
Commercially Pure
Pure
6A14V-4Mo,
7A14V-4Mo, 4911-4967
6A14V,
6A14V, 6A14V-2Sn,
6A14V-2Sn, Monel,
Monel, Monel
Monel K
K
Commercially
Pure, 17644, 200, 5553
6A14V-4Mo,
6A14V-4Mo, 7A14V-4Mo,
7A14V-4Mo, 4911-4967
4911-4967
Monel 400, Hastelloy
C, Inconel
625,
Waspaloy
Commercially
Pure,
17644,
200,
5553
Iconel
718,Nimonic
75-95,Rene
41,Iconel
825,A286
Monel
Monel 400,
400, Hastelloy
Hastelloy C,
C, Inconel
Inconel 625,
625, Waspaloy
Waspaloy
Commercially
Pure
Iconel
Iconel 718,Nimonic
41,Iconel 825,A286
825,A286
314-340, 350-370
Commercially
Commercially Pure
Pure
Alloyed
Cu + Al + Fe, Long Chipping
314-340,
314-340, 350-370
350-370
Ampco
18-25
Alloyed
Alloyed Cu
Cu +
+ Al
Al +
+ Fe,
Fe, Long
Long Chipping
Chipping
Commercially
Pure
Ampco
18-25
Ampco 18-25
6061
T6, 7075,Pure
314-340
Commercially
Commercially Pure
6061
T6, 380-390
6061
6061 T6,
T6, 7075,
7075, 314-340
314-340
Magnesium
Whisker Reinforced
6061
6061 T6,
T6, 380-390
380-390
Ultramid,
Polystrol
Magnesium
Magnesium Whisker
Whisker Reinforced
Reinforced
Bakelit,
Pertinax
Ultramid,
Ultramid, Polystrol
Polystrol
CFK,
GFKAFK
Bakelit,
Bakelit, Pertinax
Pertinax
Ferrotic
CFK,
CFK, GFKAFK
GFKAFK
Ferrotic
Ferrotic
Spiral Point Taps
Standard:
2
3
Hardness
Hardness
HB
HB
<120
<120
<200
<200
<250
<250
<250
<250
>250<350
>250<350
>350
>350
49-55HRC
49-55HRC
55-63HRC
55-63HRC
<250
<250
<250
<250
<300
<300
<300
<300
<150
<150
>150<300
>150<300
<200
<200
>200<300
>200<300
<200
<200
<270
<270
>270<350
>270<350
<150
<150
<270
<270
>270<350
>270<350
<100
<100
<200
<200
<200
<200
<470
<470
<100
<100
<150
<150
<120
<120
<120
<120
------------<550
<550
-----
259
1.1
1.1
1.2
1.2
1.3
1.3
1.4
1.4
1.5
1.5
1.6
1.6
1.7
1.7
1.8
1.8
2.1
2.1
2.2
2.2
2.3
2.3
2.4
2.4
3.1
3.1
3.2
3.2
3.3
3.3
3.4
3.4
4.1
4.1
4.2
4.2
4.3
4.3
5.1
5.1
5.2
5.2
5.3
5.3
6.1
6.1
6.2
6.2
6.3
6.3
6.4
6.4
7.1
7.1
7.2
7.2
7.3
7.3
7.4
7.4
8.1
8.1
8.2
8.2
8.3
8.3
9.1
9.1
10.1
10.1
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
260
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
261
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ɣ23
Ɣ20
Ɣ13
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
262
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ɣ23
Ɣ20
Ɣ13
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ɣ39
Ɣ16
Ŷ39
Ɣ98
Ŷ66
Ŷ39
Ɣ98
Ŷ66
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ɣ49
Ɣ26
Ɣ49
Ɣ26
263
Ɣ33
Ɣ16
Ŷ26
Ŷ23
Ŷ16
Ŷ16
Spiral Point Taps (con‘t)
E046
E055
E057
E060
1534
1634
TN1534
1585
1585A
TN1585
TN1585
1985
Spiral Point Taps
E049
263
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ131
Ŷ131
Ŷ105
Ŷ98
Ŷ56
Ɣ36
264
264
Ɣ56
Ɣ36
Ɣ33
Ɣ16
Ŷ46
Ŷ33
Ŷ20
Ŷ20
Ŷ26
Ŷ23
Ŷ16
Ŷ16
Ɣ72
Ɣ59
Ɣ82
Ɣ59
265
Ŷ131
Ŷ131
Ŷ105
Ŷ98
Ŷ56
Ɣ36
Ŷ49
Ɣ26
Ŷ59
Ɣ148
Ŷ115
Ɣ23
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ŷ26
Ŷ23
Ŷ16
Ŷ16
Ɣ72
Ɣ59
Ɣ82
Ɣ59
Ɣ23
265
Ɣ26
Ŷ59
Ɣ148
Ŷ115
266-267
268
269
270-271
272
273
273
274
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ79
Ŷ75
Ŷ49
Ŷ15
Ŷ49
Ŷ20
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ79
Ŷ75
Ŷ49
Ŷ49
Ŷ30
Ŷ20
Ŷ79
Ŷ75
Ŷ49
Ŷ49
Ŷ30
Ŷ20
Ŷ75
Ŷ69
Ŷ49
Ŷ49
Ŷ30
Ɣ16
Ɣ30
Ɣ20
Ɣ20
Ɣ30
Ɣ20
Ɣ20
Ŷ39
Ŷ26
Ɣ26
Ɣ30
Ɣ20
Ɣ20
Ɣ30
Ɣ20
Ɣ20
Ŷ39
Ŷ26
Ɣ26
Ŷ39
Ŷ26
Ɣ26
Ŷ36
Ɣ20
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ49
Ɣ30
Ɣ30
Ɣ20
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ49
Ɣ30
Ɣ30
Ɣ20
Ɣ49
Ɣ30
Ɣ30
Ɣ20
Ŷ30
Ŷ13
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ŷ30
Ŷ13
Ŷ30
Ŷ13
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ŷ39
Ŷ115
Ŷ89
Ɣ13
Ŷ66
Ŷ125
Ŷ79
Ŷ26
Ŷ121
Ŷ30
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ŷ39
Ŷ115
Ŷ89
Ɣ13
Ŷ66
Ŷ125
Ŷ79
Ŷ26
Ŷ121
Ŷ30
Ŷ39
Ŷ115
Ŷ89
Ɣ13
Ŷ66
Ŷ125
Ŷ79
Ŷ26
Ŷ121
Ŷ30
Ŷ20
Ŷ16
Ŷ7
Ŷ30
Ŷ16
Ŷ10
191
Spiral Point Taps (con‘t)
Style:
Thread Form:
1785M
TN1785
1534NR
1534NR
AMG Chart below.
72
72 = SFM
pages 204-210.
Tool Brand:
Tool Material:
Finish/Coating:
Direction:
Through/Blind Hole:
Tolerance:
Depth:
Chamfer:
Flute Form:
Coolant:
Application
Material Groups
Groups (AMG)
(AMG) With Examples
1
1.2 Magnetic
Structural Steel/
case carburising steel
1.1
1.1 Magnetic soft
soft steel
steel
1.3 Structural
Plain Carbon steel
1.2
1.2 Structural Steel/
Steel/ case
case carburising
carburising steel
steel
1.4 Alloy
steel
1.3
1. Steel
1.3 Plain
Plain Carbon
Carbon steel
steel
1.5 Alloy
Alloy steel
steel/ Hardened and tempered steel
1.4
1.4 Alloy steel
1.
1. Steel
Steel
1.6
Alloy steel/
Hardened and
tempered steel
1.5
1.5 Alloy
Alloy steel/
steel/ Hardened
Hardened and
and tempered
tempered steel
steel
1.7
Alloy steel
1.6
1.6 Alloy
Alloy steel/
steel/ Hardened
1.8
Alloy
steel
Hardened
1.7
1.7 Alloy
Alloy steel
steel Hardened
Hardened
2.1
Free machining
Stainless Steel
1.8
1.8 Alloy
Alloy steel
steel Hardened
Hardened
2.Stainless
2.2 Austenitic
2.1
Free
machining
Steel
2.1 Free machining Stainless
Stainless Steel
Steel
2.Stainless
2.3 Austenitic
Ferritic + Austenitic, Martensitic
2.Stainless
2.2
2.2 Austenitic
Steel
Steel
2.4 Ferritic
Precipitation
Hardened
2.3
+
Austenitic,
Martensitic
3.1 Precipitation
Lamellar graphite
2.4
Hardened
3.2
Lamellar graphite
3.1
3.Cast Iron
3.1 Lamellar
Lamellar graphite
graphite
3.3
Nodular
graphite/
Malleable Cast Iron
3.2
3.2 Lamellar
Lamellar graphite
graphite
3.Cast
3.Cast Iron
Iron
3.4
Nodular graphite/
Malleable Cast
Iron
3.3
3.3 Nodular
Nodular graphite/
graphite/ Malleable
Malleable Cast
Cast Iron
Iron
4.1 Titanium,
unalloyed
3.4
Nodular
graphite/
Malleable
Cast
Iron
4.Titanium
4.2 Titanium,
Titanium, alloyed
4.1
unalloyed
4.3 Titanium,
Titanium, alloyed
alloyed
4.Titanium
4.2
4.Titanium
5.1 Titanium,
Nickel, unalloyed
4.3
alloyed
5.Nickel
5.2 Nickel,
Nickel, alloyed
5.1
unalloyed
5.3
Nickel,
alloyed
5.Nickel
5.2
5.Nickel
5.2 Nickel,
Nickel, alloyed
alloyed
6.1
Copperalloyed
5.3
5.3 Nickel,
Nickel, alloyed
6.2
ß-Brass,
Bronze
6.1
6.Copper
6.1 Copper
Copper
6.3 ß-Brass,
Į-Brass Bronze
6.2
6.Copper
6.Copper
6.4 Į-Brass
High Strength Bronze
6.3
6.3 Į-Brass
7.1 Al,
Mg, unalloyed
6.4
6.4 High
High Strength
Strength Bronze
Bronze
7.2 Al,
Al alloyed,
Si<0.5%
7.Aluminium 7.1
7.1 Al, Mg,
Mg, unalloyed
unalloyed
Magnesium
7.3
Al
alloyed,
Si>0.5%<10%
7.2
Al
alloyed,
Si<0.5%
7.Aluminium
7.4 Al
alloyed, Si>10%
Mg alloys
Magnesium
Magnesium 7.3
7.3 Al
Al alloyed,
Si>0.5%<10%
8.1
Thermoplastics
7.4
7.4 Al
Al alloyed,
alloyed, Si>10%
Si>10% Mg
Mg alloys
alloys
8.Synthetic
8.2
8.1
Materials
8.1 Thermoplastics
Thermoplastics
8.Synthetic
8.3 Thermosetting
Reinforced plastic materials
8.Synthetic
8.2
plastics
Materials
Materials
9.Hard
Mat.
9.1 Reinforced
8.3
8.3 Reinforced plastic
plastic materials
materials
10.Graphite
10.1Cermets
Standard
graphite
9.Hard
Mat.
9.1
(Metal-ceramics)
9.Hard Mat.
10.Graphite
10.1
Standard
graphite
10.Graphite
192
12L14, 12L15
1005-1025,
1214, 1215, A36
12L14,
12L14, 12L15
12L15
1030-1060, 1214,
1050-1060, 1144-1146
1005-1025,
1005-1025, 1214, 1215,
1215, A36
A36
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
1030-1060,
1030-1060, 1050-1060,
1050-1060, 1144-1146
1144-1146
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
A2-D2,
H10-H41, L1-L6, M1-M42, T1
4140,4340,52100,8620
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
A2-D2,
H10-H41,
L1-L6,
M1-M42, T1
A2-D2,
A2-D2, H10-H41,
H10-H41, L1-L6,
L1-L6, M1-M42,
M1-M42, T1
T1
200,
303,
416,
420F,
430F,
440
A2-D2,
H10-H41,
L1-L6,
A2-D2, H10-H41, L1-L6, M1-M42,
M1-M42, T1
T1
301, 303,
302, 304, 420F,
316, 321, 330,
CUSTOM 455, AM-350
200,
200, 303, 416,
416, 420F, 430F,
430F, 440
440
318-329,
400-446,
15-4PH,
17-4PH.
DUPLEXAM-350
301,
302,
304,
316,
321,
330,
CUSTOM
301, 302, 304, 316, 321, 330, CUSTOM 455,
455, AM-350
15-5PH,
Custom 450
17-4PH
318-329,
318-329, 400-446,
400-446, 15-4PH,
15-4PH, 17-4PH.
17-4PH. DUPLEX
DUPLEX
Grey, G10,
Gg40,450
J431C,
A48 CLASS 20
15-5PH,
Custom
17-4PH
Grey,
GG25-Gg40,
J158, A48 CLASS
40-60
Grey,
Grey, G10,
G10, Gg40,
Gg40, J431C,
J431C, A48
A48 CLASS
CLASS 20
20
A220,
A436, A439, A602, A48
Black, GGG40-GGG70
Grey,
Grey, GG25-Gg40,
GG25-Gg40, J158,
J158, A48 CLASS
CLASS 40-60
40-60
Black
Gts/Gtw,
J434C
A220,
A220, A436,
A436, A439,
A439, A602,
A602, Black,
Black, GGG40-GGG70
GGG40-GGG70
Commercially
Pure
Black
Black Gts/Gtw,
Gts/Gtw, J434C
J434C
6A14V, 6A14V-2Sn,
Monel, Monel K
Commercially
Commercially Pure
Pure
6A14V-4Mo,
7A14V-4Mo, 4911-4967
6A14V,
6A14V, 6A14V-2Sn,
6A14V-2Sn, Monel,
Monel, Monel
Monel K
K
Commercially
Pure, 17644, 200, 5553
6A14V-4Mo,
6A14V-4Mo, 7A14V-4Mo,
7A14V-4Mo, 4911-4967
4911-4967
Monel 400, Hastelloy
C, Inconel
625,
Waspaloy
Commercially
Pure,
17644,
200,
5553
Iconel
718,Nimonic
75-95,Rene
41,Iconel
825,A286
Monel
Monel 400,
400, Hastelloy
Hastelloy C,
C, Inconel
Inconel 625,
625, Waspaloy
Waspaloy
Commercially
Pure
Iconel
Iconel 718,Nimonic
41,Iconel 825,A286
825,A286
314-340, 350-370
Commercially
Commercially Pure
Pure
Alloyed
Cu + Al + Fe, Long Chipping
314-340,
314-340, 350-370
350-370
Ampco
18-25
Alloyed
Alloyed Cu
Cu +
+ Al
Al +
+ Fe,
Fe, Long
Long Chipping
Chipping
Commercially
Pure
Ampco
18-25
Ampco 18-25
6061
T6, 7075,Pure
314-340
Commercially
Commercially Pure
6061
T6, 380-390
6061
6061 T6,
T6, 7075,
7075, 314-340
314-340
Magnesium
Whisker Reinforced
6061
6061 T6,
T6, 380-390
380-390
Ultramid,
Polystrol
Magnesium
Magnesium Whisker
Whisker Reinforced
Reinforced
Bakelit,
Pertinax
Ultramid,
Ultramid, Polystrol
Polystrol
CFK,
GFKAFK
Bakelit,
Bakelit, Pertinax
Pertinax
Ferrotic
CFK,
CFK, GFKAFK
GFKAFK
Ferrotic
Ferrotic
Spiral Point Taps
Standard:
2
3
Hardness
Hardness
HB
HB
<120
<120
<200
<200
<250
<250
<250
<250
>250<350
>250<350
>350
>350
49-55HRC
49-55HRC
55-63HRC
55-63HRC
<250
<250
<250
<250
<300
<300
<300
<300
<150
<150
>150<300
>150<300
<200
<200
>200<300
>200<300
<200
<200
<270
<270
>270<350
>270<350
<150
<150
<270
<270
>270<350
>270<350
<100
<100
<200
<200
<200
<200
<470
<470
<100
<100
<150
<150
<120
<120
<120
<120
------------<550
<550
-----
275
1.1
1.1
1.2
1.2
1.3
1.3
1.4
1.4
1.5
1.5
1.6
1.6
1.7
1.7
1.8
1.8
2.1
2.1
2.2
2.2
2.3
2.3
2.4
2.4
3.1
3.1
3.2
3.2
3.3
3.3
3.4
3.4
4.1
4.1
4.2
4.2
4.3
4.3
5.1
5.1
5.2
5.2
5.3
5.3
6.1
6.1
6.2
6.2
6.3
6.3
6.4
6.4
7.1
7.1
7.2
7.2
7.3
7.3
7.4
7.4
8.1
8.1
8.2
8.2
8.3
8.3
9.1
9.1
10.1
10.1
275
276-277
277
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ79
Ŷ75
Ŷ49
Ŷ49
Ŷ30
Ŷ20
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ɣ30
Ɣ20
Ɣ20
Ŷ39
Ŷ26
Ɣ26
Ɣ30
Ɣ20
Ɣ20
Ɣ30
Ɣ20
Ɣ20
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ49
Ɣ30
Ɣ30
Ɣ20
Ŷ30
Ŷ13
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ŷ39
Ŷ115
Ŷ89
Ɣ13
Ŷ66
Ŷ125
Ŷ79
Ŷ26
Ŷ121
Ŷ30
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Spiral Point
Spiral
/Spiral
Point
Flute
Taps
Taps
(con‘t)
(con‘t)
1593
1585OV
1785NR
1534NE
1578
E027
E028
E037
Spiral Point Taps
278-279
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
E038
E069
E079
E007
E008
E017
Spiral Flute Taps
1585NR
280
281
282
283
284
Ŷ66
Ŷ59
Ŷ46
Ŷ33
Ŷ16
Ɣ10
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ɣ66
Ɣ59
Ɣ46
Ɣ33
Ɣ16
Ɣ10
Ɣ20
Ɣ13
Ɣ10
Ɣ30
Ɣ20
Ɣ20
Ɣ30
Ɣ20
Ɣ20
Ɣ30
Ɣ20
Ɣ20
Ɣ30
Ɣ20
Ɣ20
Ɣ20
Ɣ13
Ɣ10
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Ɣ10
Ɣ33
Ɣ13
Ɣ33
Ɣ49
Ɣ33
Ɣ82
Ɣ43
Ɣ33
Ŷ66
Ɣ10
Ɣ33
Ɣ13
Ɣ33
Ɣ49
Ɣ33
Ɣ82
Ɣ43
Ɣ33
Ɣ66
285
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
286
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
287
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ɣ23
Ɣ20
Ɣ13
288
289
290
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ɣ33
Ɣ16
Ɣ33
Ɣ16
Ɣ23
Ɣ20
Ɣ13
Ŷ23
Ŷ20
Ŷ13
Ŷ23
Ŷ20
Ŷ13
291
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
291
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
292
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ23
Ɣ20
Ɣ13
Ɣ33
Ɣ16
Ɣ33
Ɣ16
Ɣ33
Ɣ16
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ɣ39
Ɣ16
Ɣ39
Ɣ16
Ɣ39
Ɣ16
Ŷ39
Ɣ98
Ŷ66
Ŷ39
Ɣ98
Ŷ66
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ŷ39
Ɣ98
Ŷ66
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
193
Spiral Flute Taps
Style :
Thread Form:
E018
E085
E002
E003
1 Determine your Workpiece Material. Select Material from the AMG
Chart below.
(SFM). example:
72
72 = SFM
pages 204-210.
Tool Brand:
Tool Material:
Finish/Coating:
Direction:
Through/Blind Hole:
Tolerance:
Depth:
Chamfer:
Flute Form:
Coolant:
1
194
3
Hardness
Hardness
HB
HB
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
Spiral Flute
Point Taps
Taps
Standard:
2
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<120
<200
<200
<250
<250
<250
<250
>250<350
>250<350
>350
>350
49-55HRC
49-55HRC
55-63HRC
55-63HRC
<250
<250
<250
<250
<300
<300
<300
<300
<150
<150
>150<300
>150<300
<200
<200
>200<300
>200<300
<200
<200
<270
<270
>270<350
>270<350
<150
<150
<270
<270
>270<350
>270<350
<100
<100
<200
<200
<200
<200
<470
<470
<100
<100
<150
<150
<120
<120
<120
<120
------------<550
<550
-----
292
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ23
Ɣ20
Ɣ13
293
Ɣ33
Ɣ16
294
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ŷ23
Ŷ20
Ŷ13
295
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ23
Ɣ20
Ɣ13
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Spiral Flute Taps (con‘t)
E013
E050
E051
E048
E044
E052
E058
1582
1586
1587
1588
1788
303
304
305
1590
1591(UNC)
Spiral Flute Taps
E012
296
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
297
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
298
Ŷ131
Ŷ131
Ŷ105
Ŷ98
Ŷ56
Ɣ36
298
Ŷ131
Ŷ131
Ŷ105
Ŷ98
Ŷ56
Ɣ36
Ɣ23
Ɣ20
Ɣ13
299
Ɣ105
Ɣ89
Ɣ43
Ɣ36
299
Ɣ82
Ɣ72
Ɣ59
Ŷ52
Ŷ33
Ŷ16
300
Ɣ82
Ɣ72
Ɣ59
Ŷ52
Ŷ33
300
Ŷ131
Ŷ131
Ŷ105
Ŷ98
Ŷ56
Ɣ36
Ŷ46
Ŷ33
Ŷ20
Ŷ20
Ɣ33
Ɣ16
Ɣ23
Ɣ23
Ɣ16
Ɣ23
Ɣ39
Ɣ16
Ɣ26
Ɣ26
Ɣ16
Ɣ26
Ŷ59
Ɣ148
Ŷ115
Ŷ59
Ɣ148
Ŷ115
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ɣ39
Ŷ98
Ŷ66
301
302
306
307
Ɣ66
Ɣ49
Ɣ36
Ɣ36
Ɣ66
Ɣ49
Ɣ36
Ɣ36
Ŷ69
Ŷ59
Ŷ39
Ŷ39
Ɣ30
Ŷ69
Ŷ59
Ŷ39
Ŷ39
Ɣ30
Ɣ26
Ɣ20
Ɣ20
Ɣ26
Ɣ20
Ɣ20
Ŷ30
Ŷ26
Ŷ20
Ŷ30
Ŷ26
Ŷ20
Ɣ20
Ɣ16
Ɣ7
Ɣ20
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ20
Ɣ16
Ŷ20
Ŷ16
Ɣ7
Ŷ20
Ŷ16
Ɣ7
Ɣ10
Ɣ10
Ŷ59
Ɣ148
Ŷ115
Ɣ52
Ŷ115
Ŷ66
Ŷ49
Ɣ30
Ŷ79
Ŷ79
Ɣ30
Ŷ79
Ŷ79
Ɣ30
Ŷ79
Ŷ79
Ŷ49
Ŷ66
Ŷ66
Ŷ49
Ŷ66
Ŷ66
Ŷ49
Ŷ66
Ŷ66
195
Thread Forming Taps
Style:
Thread Form:
E029
E064
E039
E074
Chart below.
72
72 = SFM
pages 204-210.
Tool Brand:
Tool Material:
2
Standard:
Direction:
Through/Blind Hole:
Tolerance:
Depth:
Chamfer:
Flute Form:
Coolant:
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
196
Thread Forming Taps
Finish/Coating:
3
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
308
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ180
Ŷ164
Ŷ148
Ŷ131
Ɣ66
309
Ɣ98
Ɣ89
Ɣ75
Ɣ66
309
Ŷ180
Ŷ164
Ŷ148
Ŷ131
Ɣ66
Ŷ59
Ŷ49
Ɣ33
Ŷ59
Ŷ49
Ɣ33
Ŷ115
Ŷ115
Ŷ66
Ɣ26
Ŷ66
Ɣ26
Ɣ82
Ɣ82
Ɣ131
Ɣ131
Ŷ131
Ŷ180
Ŷ131
Ɣ82
Ɣ72
Ɣ125
Ɣ72
Ŷ131
Ŷ180
Ŷ131
Ɣ82
310
Ɣ98
Ɣ89
Ɣ75
Ɣ66
Ɣ72
Ɣ125
Ɣ72
Thread Forming Taps (con‘t)
E094
E097
E098
E099
E080
1580(UNC)
1580(UNF)
1580(M)
3300(UNC)
3300(UNF)
3300(M)
3306E(UNC)
3306E(UNF)
Thread Forming Taps
E009
310
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
311
311
312
312
313
314
315
316
317
318
319
320
321
Ŷ180
Ŷ164
Ŷ148
Ɣ131
Ŷ180
Ŷ164
Ŷ148
Ŷ131
Ɣ66
Ŷ180
Ŷ164
Ŷ148
Ŷ131
Ɣ66
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ98
Ŷ79
Ŷ49
Ŷ49
Ɣ30
Ŷ59
Ŷ49
Ɣ33
Ɣ59
Ɣ49
Ŷ59
Ŷ49
Ɣ33
Ŷ59
Ŷ49
Ɣ33
Ɣ39
Ɣ30
Ɣ39
Ɣ30
Ɣ39
Ɣ30
Ɣ39
Ɣ30
Ɣ39
Ɣ30
Ɣ39
Ɣ30
Ɣ39
Ɣ30
Ɣ39
Ɣ30
Ŷ115
Ŷ115
Ŷ115
Ŷ115
Ɣ30
Ɣ26
Ɣ30
Ɣ26
Ɣ30
Ɣ26
Ɣ30
Ɣ26
Ɣ30
Ɣ26
Ɣ30
Ɣ26
Ɣ30
Ɣ26
Ɣ30
Ɣ26
Ŷ66
Ɣ26
Ŷ66
Ɣ26
Ŷ66
Ɣ26
Ŷ66
Ɣ26
Ɣ30
Ɣ30
Ɣ30
Ɣ30
Ɣ30
Ɣ30
Ɣ30
Ɣ30
Ɣ82
Ɣ82
Ɣ82
Ɣ82
Ŷ82
Ɣ131
Ɣ131
Ɣ131
Ɣ131
Ŷ131
Ɣ39
Ŷ121
Ŷ98
Ɣ39
Ŷ121
Ŷ98
Ɣ39
Ŷ121
Ŷ98
Ɣ39
Ŷ121
Ŷ98
Ɣ39
Ŷ121
Ŷ98
Ɣ39
Ŷ121
Ŷ98
Ɣ39
Ŷ121
Ŷ98
Ɣ39
Ŷ121
Ŷ98
Ŷ131
Ŷ180
Ŷ131
Ɣ82
Ŷ131
Ŷ180
Ŷ131
Ɣ82
Ŷ131
Ŷ180
Ŷ131
Ɣ82
Ŷ131
Ŷ180
Ŷ131
Ŷ79
Ŷ161
Ŷ98
Ŷ79
Ŷ161
Ŷ98
Ŷ79
Ŷ161
Ŷ98
Ŷ79
Ŷ161
Ŷ98
Ŷ79
Ŷ161
Ŷ98
Ŷ79
Ŷ161
Ŷ98
Ŷ79
Ŷ161
Ŷ98
Ŷ79
Ŷ161
Ŷ98
Ŷ180
Ŷ164
Ŷ148
Ŷ131
Ɣ66
Ŷ131
Ŷ180
Ŷ131
Ɣ82
Ɣ98
Ɣ89
Ɣ75
Ɣ66
Ɣ72
Ɣ125
Ɣ72
197
Pipe Taps
Style:
Thread Form:
E710
1541
TN1541
1543
TN1543
Chart below.
72 72 = SFM
pages 204-210.
Tool Brand:
Tool Material:
Finish/Coating:
Standard:
2
Direction:
Through/Blind Hole:
Depth:
Chamfer:
Flute Form:
Coolant:
Pipe Taps
Tolerance:
1
Application
Material Groups
Groups (AMG)
(AMG) With Examples
1.4 Alloy steel
1.4 Alloy steel
1. Steel
1. Steel
2.Stainless
2.Stainless
2.2 Austenitic
2.2 Austenitic
Steel
Steel
3.Cast Iron
3.Cast Iron
4.Titanium
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.1 Copper
6.Copper
6.Copper
6.3 Į-Brass
6.3 Į-Brass
Al alloyed, Si<0.5%
7.Aluminium 7.2
8.1 Thermoplastics
8.1 Thermoplastics
8.Synthetic
8.Synthetic
Materials
Materials
9.Hard Mat.
9.Hard Mat.
10.Graphite
10.Graphite
198
Feet Per Minute (SFM)
1/16 Surface
- 3“
3
Hardness
Hardness
HB
HB
12L14, 12L15
12L14, 12L15
1005-1025, 1214, 1215, A36
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
Commercially Pure
314-340, 350-370
314-340, 350-370
Ampco 18-25
Ampco 18-25
Commercially Pure
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 7075, 314-340
6061 T6, 380-390
6061 T6, 380-390
Ultramid, Polystrol
Ultramid, Polystrol
Bakelit, Pertinax
Bakelit, Pertinax
CFK, GFKAFK
CFK, GFKAFK
Ferrotic
Ferrotic
<120
<120
<200
<200
<250
<250
<250
<250
>250<350
>250<350
>350
>350
49-55HRC
49-55HRC
55-63HRC
55-63HRC
<250
<250
<250
<250
<300
<300
<300
<300
<150
<150
>150<300
>150<300
<200
<200
>200<300
>200<300
<200
<200
<270
<270
>270<350
>270<350
<150
<150
<270
<270
>270<350
>270<350
<100
<100
<200
<200
<200
<200
<470
<470
<100
<100
<150
<150
<120
<120
<120
<120
------------<550
<550
-----
322
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
323
323
324
324
Ɣ13
Ɣ13
Ɣ20
Ɣ16
Ɣ10
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
Ɣ16
Ɣ16
Ŷ23
Ŷ20
Ɣ13
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
Ɣ16
Ɣ16
Ŷ23
Ŷ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ43
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ23
Ɣ16
Ɣ23
Ɣ16
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ23
Ɣ16
Ɣ23
Ɣ16
Ɣ36
Ɣ36
Ɣ39
Ɣ36
Ɣ39
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ23
Ɣ13
Ɣ39
Ɣ26
Ɣ16
Ɣ36
Ɣ23
Ɣ13
Ɣ39
Ɣ26
Ɣ16
Pipe Taps (con‘t)
1545
1545A
1546
1568
1567
1548
1549
1542
1592
E040
E041
E042
E043
E547
331
332-333
E550
Pipe Taps
1544
325
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
325
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
326
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
326
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
327
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
327
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
328
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
328
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
329
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
329
Ɣ13
Ɣ13
Ŷ20
Ŷ16
Ɣ10
330
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
330
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
331
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ23
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ20
Ɣ13
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ36
Ɣ36
Ɣ23
Ɣ13
Ɣ23
Ɣ20
Ɣ16
Ɣ13
Ɣ10
Ɣ23
Ɣ20
Ɣ13
Ɣ49
Ɣ26
Ɣ49
Ɣ26
333
Ɣ72
Ɣ66
Ɣ52
Ɣ39
Ɣ23
Ɣ13
Ɣ23
Ɣ16
Ɣ23
Ɣ39
Ɣ23
Ɣ33
Ɣ16
Ŷ39
Ŷ23
Ŷ33
Ŷ16
Ɣ13
Ɣ33
Ɣ23
Ɣ7
Ŷ39
Ɣ98
Ɣ66
Ɣ13
Ɣ39
Ɣ23
Ɣ16
Ɣ115
Ɣ66
Ɣ49
Ɣ16
Ɣ10
Ɣ39
Ɣ23
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ŷ39
Ɣ98
Ŷ66
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
199
Miscellaneous Taps and Dies
1994
Style:
Thread Form:
E650, E651
E653
2025,
2325M,
2010
Chart below.
(SFM). example
72 72 - SFM
2510,
2710M
4 NOTE: Additional cutting charts located
on page 204-210.
Tool Brand:
Tool Material:
Finish/Coating:
Direction:
Through/Blind Hole:
Tolerance:
Depth:
See pg 337-338
for these products
Ŷ
Ɣ
Chamfer:
Flute Form:
Coolant:
3
Hardness
Hardness
HB
HB
1
200
Surface Feet Per Minute
1/16 - 1“(SFM)
Page ## for
for easy
easy reference
reference
Page
Application
Material Groups
Groups (AMG)
(AMG) With Examples
1.1
1.1 Magnetic
Magnetic soft
soft steel
steel
1.2
1.2 Structural
Structural Steel/
Steel/ case
case carburising
carburising steel
steel
1.3
Plain
Carbon
steel
1.4
Alloy
steel
1.4 Alloy steel
1.
1. Steel
Steel
1.5
1.5 Alloy
Alloy steel/
steel/ Hardened
Hardened and
and tempered
tempered steel
steel
1.6
1.6 Alloy
Alloy steel/
steel/ Hardened
Hardened and
and tempered
tempered steel
steel
1.7
1.7 Alloy
Alloy steel
steel Hardened
Hardened
1.8
1.8 Alloy
Alloy steel
steel Hardened
Hardened
2.1
2.1 Free
Free machining
machining Stainless
Stainless Steel
Steel
2.Stainless
2.Stainless
2.2
2.2 Austenitic
Austenitic
Steel
Steel
2.3
Ferritic
+
Austenitic,
Martensitic
2.4
2.4 Precipitation
Precipitation Hardened
Hardened
3.1
3.1 Lamellar
Lamellar graphite
graphite
3.2
3.2 Lamellar
Lamellar graphite
graphite
3.Cast
3.Cast Iron
Iron
3.3
3.3 Nodular
Nodular graphite/
graphite/ Malleable
Malleable Cast
Cast Iron
Iron
3.4
3.4 Nodular
Nodular graphite/
graphite/ Malleable
Malleable Cast
Cast Iron
Iron
4.1
4.1 Titanium,
Titanium, unalloyed
unalloyed
4.Titanium
4.2
4.Titanium
4.2 Titanium,
Titanium, alloyed
alloyed
4.3
4.3 Titanium,
Titanium, alloyed
alloyed
5.1
Nickel,
unalloyed
5.Nickel
5.2
Nickel,
alloyed
5.Nickel
5.2 Nickel, alloyed
5.3
5.3 Nickel,
Nickel, alloyed
alloyed
6.1
6.1 Copper
Copper
6.2
6.2 ß-Brass,
ß-Brass, Bronze
Bronze
6.Copper
6.Copper
6.3
6.3 Į-Brass
Į-Brass
6.4
6.4 High
High Strength
Strength Bronze
Bronze
7.1
7.1 Al,
Al, Mg,
Mg, unalloyed
unalloyed
7.2
Al
alloyed,
Si<0.5%
7.Aluminium
Magnesium
Magnesium 7.3
7.3 Al
Al alloyed,
Si>0.5%<10%
7.4
7.4 Al
Al alloyed,
alloyed, Si>10%
Si>10% Mg
Mg alloys
alloys
8.1
8.1 Thermoplastics
Thermoplastics
8.Synthetic
8.Synthetic
8.2
8.2 Thermosetting
plastics
Materials
Materials
8.3
8.3 Reinforced
Reinforced plastic
plastic materials
materials
9.Hard
9.1
9.Hard Mat.
Mat.
9.1 Cermets
(Metal-ceramics)
10.Graphite
10.1
Standard
graphite
10.Graphite
Misc Taps
Standard:
2
12L14,
12L14, 12L15
12L15
1005-1025,
1005-1025, 1214,
1214, 1215,
1215, A36
A36
1030-1060,
1030-1060, 1050-1060,
1050-1060, 1144-1146
1144-1146
4140,4340,52100,8620
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
H11-H41,A2,D2,01,P20,420
A2-D2,
A2-D2, H10-H41,
H10-H41, L1-L6,
L1-L6, M1-M42,
M1-M42, T1
T1
A2-D2,
A2-D2, H10-H41,
H10-H41, L1-L6,
L1-L6, M1-M42,
M1-M42, T1
T1
200,
200, 303,
303, 416,
416, 420F,
420F, 430F,
430F, 440
440
301,
301, 302,
302, 304,
304, 316,
316, 321,
321, 330,
330, CUSTOM
CUSTOM 455,
455, AM-350
AM-350
318-329,
318-329, 400-446,
400-446, 15-4PH,
15-4PH, 17-4PH.
17-4PH. DUPLEX
DUPLEX
15-5PH,
Custom
450
17-4PH
Grey,
Grey, G10,
G10, Gg40,
Gg40, J431C,
J431C, A48
A48 CLASS
CLASS 20
20
Grey,
Grey, GG25-Gg40,
GG25-Gg40, J158,
J158, A48
A48 CLASS
CLASS 40-60
40-60
A220,
A220, A436,
A436, A439,
A439, A602,
A602, Black,
Black, GGG40-GGG70
GGG40-GGG70
Black
Black Gts/Gtw,
Gts/Gtw, J434C
J434C
Commercially
Commercially Pure
Pure
6A14V,
6A14V, 6A14V-2Sn,
6A14V-2Sn, Monel,
Monel, Monel
Monel K
K
6A14V-4Mo,
7A14V-4Mo,
6A14V-4Mo, 7A14V-4Mo, 4911-4967
4911-4967
Commercially
Pure,
17644,
200,
5553
Monel
Monel 400,
400, Hastelloy
Hastelloy C,
C, Inconel
Inconel 625,
625, Waspaloy
Waspaloy
Iconel
Iconel 718,Nimonic
41,Iconel 825,A286
825,A286
Commercially
Commercially Pure
Pure
314-340,
314-340, 350-370
350-370
Alloyed
Alloyed Cu
Cu +
+ Al
Al +
+ Fe,
Fe, Long
Long Chipping
Chipping
Ampco
Ampco 18-25
18-25
Commercially
Pure
Commercially Pure
6061
6061 T6,
T6, 7075,
7075, 314-340
314-340
6061
6061 T6,
T6, 380-390
380-390
Magnesium
Magnesium Whisker
Whisker Reinforced
Reinforced
Ultramid,
Ultramid, Polystrol
Polystrol
Bakelit,
Bakelit, Pertinax
Pertinax
CFK,
CFK, GFKAFK
GFKAFK
Ferrotic
Ferrotic
<120
<120
<200
<200
<250
<250
<250
<250
>250<350
>250<350
>350
>350
49-55HRC
49-55HRC
55-63HRC
55-63HRC
<250
<250
<250
<250
<300
<300
<300
<300
<150
<150
>150<300
>150<300
<200
<200
>200<300
>200<300
<200
<200
<270
<270
>270<350
>270<350
<150
<150
<270
<270
>270<350
>270<350
<100
<100
<200
<200
<200
<200
<470
<470
<100
<100
<150
<150
<120
<120
<120
<120
------------<550
<550
-----
334
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ɣ82
Ɣ72
Ɣ59
Ɣ49
335
Ɣ82
Ɣ72
Ɣ59
Ɣ49
336
Ɣ82
Ɣ72
Ɣ59
Ɣ49
342343
Ŷ26
Ŷ23
Ŷ20
Ɣ16
Ɣ13
Ɣ7
Ɣ26
Ɣ26
Ɣ26
Ɣ98
Ɣ66
Ɣ98
Ɣ66
Ɣ98
Ɣ66
Ɣ59
Ɣ115
Ɣ59
Ɣ115
Ɣ59
Ɣ115
Ɣ98
Ɣ98
Ɣ98
Ŷ26
Ŷ23
Ŷ20
Ɣ16
Ɣ7
Ɣ30
Ɣ7
Ɣ7
Ɣ30
Ɣ26
Ɣ23
Ŷ33
Ŷ49
Ŷ49
Ɣ33
Ɣ49
Ɣ33
Ɣ16
Threading with Taps
Icon Guide for Taps
Tapping Speeds
202
203
204
205
206
207
208
209
210
201
Threading with Taps
CHAMFER LENGTHS AND SERIAL TAPS
The first group (No. 1, 2, 3) includes taps with complete thread profile and the
difference is in the chamfer length.
The second group (No. 4, 5) includes taps with incomplete thread profile. They
have lower pitch and outer diameter, compared to the complete standard, and
longer chamfer. After using them, a finishing tap No. 3 must be used.
NO. 1 =
Taper
6-8 x P
NO. 2 =
Plug
4-6 x P
NO. 3 =
Bottoming
2-3 x P
NO. 4 =
6-8 x P
NO. 5 =
3,5-5 x P
Ø<=M10
202
Ø<=M12
Icon Guide for Taps
Spiral
Point
Form
Tap
Spiral
Flute
Through or
Blind Hole
Straight
Flute
Helix
Angle
Through
Hole
Class
of Fit
Depth
Parallel
Internal
Thread
Taper
Chamfer
Plug
Chamfer
SemiBottoming
Chamfer
Full
Bottoming
Chamfer
Chromium
Steel
HSCo
Powder
Steel
HSS
Powder
Steel
Carbide
(Hard Metal)
HSS
Cobalt
Nitride
Nitride
Steam
Hard
Lube
Flash
Chrome
Carbide
American National Standard Institute
- Standard Tap Blank used in the US
- Fractional Tap Blank Dimensions.
Chromium
Nitride
Coolant
Gold
Steam
Oxide
Zirconium
Nitride
International Organization for Standardization Common Tap Blanks used in Great Britain
- Metric Tap Blank Dimensions
(Dormer ISO Standard)
Deutsches Institut fur Normung
- Standard Organization based in Germany
- Metric Tap Blank Dimensions that are normally longer than ISO and
ANSI standard(Dormer DIN Standard)
203
Threading with Taps
Tap Drill Sizes for Unified Threads
The charts on this page are recommended sizes for cutting taps. Hole
sizes shown may not suit UNJ and MJ hole requirements
204
*
*Probable percent of full thread produced in tapped hole using
standard drill sizes.
205
Threading with Taps
206
207
Threading with Taps
208
*
*
*
*
*Internal Thread Minor Diameter Tolerances. Internal thread minor diameter tolerances are based on a length of engagement equal to the nominal
diameter. For general applications, these tolerances are suitable for lengths of engagement up to 1-1/2 diameters. However, some thread applications
have lengths of engagement which are greater than 1-1/2 diameters or less than the nominal diameter. For such applications, it may be advantageous
to increase or decrease the tolerance, respectively.
209
Threading with Taps
Tapping Speeds
(Surface Feet Per Minute to Revolutions Per Minute)
210
T100 - T110
Ɣ Carbide-Taps
Ɣ Straight Flute
Ɣ Tarauds machine
Ɣ Machos de máquina
T100
Ŷ
Ɣ
l1
M
P
mm
d2
Ø
mm
l2
l3
mm
mm
mm
3
4
5
6
8
10
12
0.50
0.70
0.80
1.00
1.25
1.50
1.75
3.5
4.5
6
6
8
10
12
56
63
70
80
90
100
110
10
13
16
20
25
30
36
6
6
8
8
9
11
14
l2
l3
M
d2
Ø
mm
l1
P
mm
mm
mm
mm
3
4
5
6
8
10
12
0.50
0.70
0.80
1.00
1.25
1.50
1.75
3.5
4.5
6
6
8
10
12
56
63
70
80
90
100
110
10
13
16
20
25
30
36
6
6
8
8
9
11
14
a
mm
2.70
3.40
4.90
4.90
6.20
8.00
9.00
EDP #
or
Stock # e-Code
#
Flutes
3
3
3
3
3
3
3
2.6
3.4
4.3
5.1
6.9
8.7
10.4
0374214
0374221
0374238
0374245
0374252
0374269
0374276
T100M3
T100M4
T100M5
T100M6
T100M8
T100M10
T100M12
T110
Ŷ
Ɣ
a
mm
2.70
3.40
4.90
4.90
6.20
8.00
9.00
EDP #
or
Stock # e-Code
#
Flutes
4
5
5
5
5
5
6
2.6
3.4
4.3
5.1
6.9
8.7
10.4
0374283
0374290
0374306
0374313
0374320
0374337
0374344
T110M3
T110M4
T110M5
T110M6
T110M8
T110M10
T110M12
211
E061
Ɣ Hand Tap MTT
Ɣ For use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ MTT - Tarauds à main
Ɣ MTT Machos de mano
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
12
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
24
20
20
20
20
18
18
18
18
16
16
16
16
14
14
14
14
13
13
13
13
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
0.5800
0.5800
0.5800
0.5800
0.6500
0.6500
0.6500
0.6500
0.7600
0.7600
0.7600
0.7600
0.8100
0.8100
0.8100
0.8100
0.6500
0.6500
0.6500
0.6500
0.7700
0.7700
0.7700
0.7700
0.8100
0.8100
0.8100
0.8100
0.9055
0.9055
0.9055
0.9055
0.9055
0.9055
0.9055
0.9055
0.1410
0.1410
0.1410
0.1410
0.1680
0.1680
0.1680
0.1680
0.1940
0.1940
0.1940
0.1940
0.2200
0.2200
0.2200
0.2200
0.2550
0.2550
0.2550
0.2550
0.3180
0.3180
0.3180
0.3180
0.3810
0.3810
0.3810
0.3810
0.3230
0.3230
0.3230
0.3230
0.3670
0.3670
0.3670
0.3670
l4
a
Inch
0.1100
0.1100
0.1100
0.1100
0.1310
0.1310
0.1310
0.1310
0.1520
0.1520
0.1520
0.1520
0.1650
0.1650
0.1650
0.1650
0.1910
0.1910
0.1910
0.1910
0.2380
0.2380
0.2380
0.2380
0.2860
0.2860
0.2860
0.2860
0.2420
0.2420
0.2420
0.2420
0.2750
0.2750
0.2750
0.2750
#
Flutes Limits
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
Inch
36
36
36
36
29
29
29
29
25
25
25
25
16
16
16
16
7
7
7
7
F
F
F
F
5/16
5/16
5/16
5/16
U
U
U
U
27/64
27/64
27/64
27/64
2.85
2.85
2.85
2.85
3.50
3.50
3.50
3.50
3.90
3.90
3.90
3.90
4.50
4.50
4.50
4.50
5.10
5.10
5.10
5.10
6.60
6.60
6.60
6.60
8.00
8.00
8.00
8.00
9.40
9.40
9.40
9.40
10.80
10.80
10.80
10.80
0.5800
0.5800
0.5800
0.5800
0.6500
0.6500
0.6500
0.6500
0.7600
0.7600
0.7600
0.7600
0.8100
0.8100
0.8100
0.8100
1.0630
1.0630
1.0630
1.0630
1.2598
1.2598
1.2598
1.2598
1.3780
1.3780
1.3780
1.3780
EDP #
or
Stock # e-Code
0348291
0348307
0348314
0348321
0348284
0348338
0348345
0348352
0348369
0348376
0348383
0348390
0348406
0348413
0348420
0348437
0348444
0348451
0348468
0348475
0348482
0348499
0348505
0348512
0348529
0348536
0348543
0348550
0348567
0348574
0348581
0348598
0348604
0348611
0348628
0348635
E0616-32NO1
E0616-32NO2
E0616-32NO3
E0616-32NO6
E0618-32NO1
E0618-32NO2
E0618-32NO3
E0618-32NO6
E06110-24NO1
E06110-24NO2
E06110-24NO3
E06110-24NO6
E06112-24NO1
E06112-24NO2
E06112-24NO3
E06112-24NO6
E0611/4NO1
E0611/4NO2
E0611/4NO3
E0611/4NO6
E0615/16NO1
E0615/16NO2
E0615/16NO3
E0615/16NO6
E0613/8NO1
E0613/8NO2
E0613/8NO3
E0613/8NO6
E0617/16NO1
E0617/16NO2
E0617/16NO3
E0617/16NO6
E0611/2NO1
E0611/2NO2
E0611/2NO3
E0611/2NO6
Sizes up to 1” - Gold Finish
1” and larger - Bright Finish
212
E061
Ɣ Hand Tap MTT
applications
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
12
12
12
12
11
11
11
11
10
10
10
10
9
9
9
9
8
8
8
8
7
7
7
7
7
7
6
6
6
6
6
6
3.19/32
3.19/32
3.19/32
3.19/32
3.13/16
3.13/16
3.13/16
3.13/16
4.1/4
4.1/4
4.1/4
4.1/4
4.11/16
4.11/16
4.11/16
4.11/16
5.1/8
5.1/8
5.1/8
5.1/8
5.7/16
5.7/16
5.7/16
5.3/4
5.3/4
5.3/4
6.1/16
6.1/16
6.1/16
6.3/8
6.3/8
6.3/8
0.9843
0.9843
0.9843
0.9843
0.9843
0.9843
0.9843
0.9843
1.1811
1.1811
1.1811
1.1811
1.1811
1.1811
1.1811
1.1811
1.4173
1.4173
1.4173
1.4173
1.3976
1.3976
1.3976
1.6338
1.6338
1.6338
1.8700
1.8700
1.8700
1.8700
1.8700
1.8700
0.4290
0.4290
0.4290
0.4290
0.4800
0.4800
0.4800
0.4800
0.5900
0.5900
0.5900
0.5900
0.6970
0.6970
0.6970
0.6970
0.8000
0.8000
0.8000
0.8000
0.8950
0.8950
0.8950
1.0210
1.0210
1.0210
1.1090
1.1090
1.1090
1.2330
1.2330
1.2330
l4
a
Inch
0.3220
0.3220
0.3220
0.3220
0.3600
0.3600
0.3600
0.3600
0.4420
0.4420
0.4420
0.4420
0.5230
0.5230
0.5230
0.5230
0.6000
0.6000
0.6000
0.6000
0.6710
0.6710
0.6710
0.7650
0.7650
0.7650
0.8300
0.8300
0.8300
0.9520
0.9520
0.9520
#
Flutes
Limits
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
EDP #
or
Inch Stock # e-Code
27/64
31/64
31/64
31/64
17/32
17/32
17/32
17/32
21/32
21/32
21/32
21/32
49/64
49/64
49/64
49/64
7/8
7/8
7/8
7/8
63/64
63/64
63/64
1.7/64
1.7/64
1.7/64
1.7/32
1.7/32
1.7/32
1.11/32
1.11/32
1.11/32
12.20
12.20
12.20
12.20
13.50
13.50
13.50
13.50
16.50
16.50
16.50
16.50
19.50
19.50
19.50
19.50
22.25
22.25
22.25
22.25
25.00
25.00
25.00
28.00
28.00
28.00
30.75
30.75
30.75
34.00
34.00
34.00
0351833
0348642
0348659
0348666
0348673
0348680
0348697
0348703
0348710
0348727
0348734
0348741
0348758
0348765
0348772
0348789
0348796
0348802
0348819
0348826
0388112
0388129
0388136
0388143
0388150
0388167
0388174
0388181
0388198
0388204
0388211
0388228
E0619/16NO1
E0619/16NO2
E0619/16NO3
E0619/16NO6
E0615/8NO1
E0615/8NO2
E0615/8NO3
E0615/8NO6
E0613/4NO1
E0613/4NO2
E0613/4NO3
E0613/4NO6
E0617/8NO1
E0617/8NO2
E0617/8NO3
E0617/8NO6
E0611NO1
E0611NO2
E0611NO3
E0611NO6
E0611.1/8NO1
E0611.1/8NO2
E0611.1/8NO3
E0611.1/4NO1
E0611.1/4NO2
E0611.1/4NO3
E0611.3/8NO1
E0611.3/8NO2
E0611.3/8NO3
E0611.1/2NO1
E0611.1/2NO2
E0611.1/2NO3
213
E071
Ɣ Hand Tap MTT
applications
Ŷ
Ɣ
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
12
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
40
40
40
40
36
36
36
36
32
32
32
32
28
28
28
28
28
28
28
28
24
24
24
24
24
24
24
24
20
20
20
20
20
20
20
20
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
0.5800
0.5800
0.5800
0.5800
0.6500
0.6500
0.6500
0.6500
0.7600
0.7600
0.7600
0.7600
0.8100
0.8100
0.8100
0.8100
0.6500
0.6500
0.6500
0.6500
0.7700
0.7700
0.7700
0.7700
0.8100
0.8100
0.8100
0.8100
0.9055
0.9055
0.9055
0.9055
0.9055
0.9055
0.9055
0.9055
0.1410
0.1410
0.1410
0.1410
0.1680
0.1680
0.1680
0.1680
0.1940
0.1940
0.1940
0.1940
0.2200
0.2200
0.2200
0.2200
0.2550
0.2550
0.2550
0.2550
0.3180
0.3180
0.3180
0.3180
0.3810
0.3810
0.3810
0.3810
0.3230
0.3230
0.3230
0.3230
0.3670
0.3670
0.3670
0.3670
l4
a
Inch
0.1100
0.1100
0.1100
0.1100
0.1310
0.1310
0.1310
0.1310
0.1520
0.1520
0.1520
0.1520
0.1650
0.1650
0.1650
0.1650
0.1910
0.1910
0.1910
0.1910
0.2380
0.2380
0.2380
0.2380
0.2860
0.2860
0.2860
0.2860
0.2420
0.2420
0.2420
0.2420
0.2750
0.2750
0.2750
0.2750
#
Flutes Limits
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
H2
H2
H2
H2
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
Inch
33
33
33
33
29
29
29
29
21
21
21
21
15
15
15
15
3
3
3
3
I
I
I
I
Q
Q
Q
Q
25/64
25/64
25/640
25/64
29/64
29/64
29/64
29/64
2.90
2.90
2.90
2.90
3.50
3.50
3.50
3.50
4.10
4.10
4.10
4.10
4.70
4.70
4.70
4.70
5.50
5.50
5.50
5.50
6.90
6.90
6.90
6.90
8.50
8.50
8.50
8.50
9.90
9.90
9.90
9.90
11.50
11.50
11.50
11.50
0.5800
0.5800
0.5800
0.5800
0.6500
0.6500
0.6500
0.6500
0.7600
0.7600
0.7600
0.7600
0.8100
0.8100
0.8100
0.8100
1.0630
1.0630
1.0630
1.0630
1.2598
1.2598
1.2598
1.2598
1.3780
1.3780
1.3780
1.3780
EDP #
or
Stock # e-Code
0349427
0349434
0349441
0349458
0349465
0349472
0349489
0349496
0349502
0349519
0349526
0349533
0349540
0349557
0349564
0349571
0349588
0349595
0349601
0349618
0349625
0349632
0349649
0349656
0349663
0349670
0349687
0349694
0349700
0349717
0349724
0349731
0349748
0349755
0349762
0349779
E0716-40NO1
E0716-40NO2
E0716-40NO3
E0716-40NO6
E0718-36NO1
E0718-36NO2
E0718-36NO3
E0718-36NO6
E07110-32NO1
E07110-32NO2
E07110-32NO3
E07110-32NO6
E07112-28NO1
E07112-28NO2
E07112-28NO3
E07112-28NO6
E0711/4NO1
E0711/4NO2
E0711/4NO3
E0711/4NO6
E0715/16NO1
E0715/16NO2
E0715/16NO3
E0715/16NO6
E0713/8NO1
E0713/8NO2
E0713/8NO3
E0713/8NO6
E0717/16NO1
E0717/16NO2
E0717/16NO3
E0717/16NO6
E0711/2NO1
E0711/2NO2
E0711/2NO3
E0711/2NO6
214
E071
Ɣ Hand Tap MTT
applications
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1
1“
1“
1“
1
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
18
18
18
18
18
18
18
18
16
16
16
16
14
14
14
14
12
12
12
12
14
14
14
14
12
12
12
12
12
12
12
12
12
12
12
12
3.19/32
3.19/32
3.19/32
3.19/32
3.13/16
3.13/16
3.13/16
3.13/16
4.1/4
4.1/4
4.1/4
4.1/4
4.11/16
4.11/16
4.11/16
4.11/16
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.7/16
5.7/16
5.7/16
5.3/4
5.3/4
5.3/4
6.1/16
6.1/16
6.1/16
6.3/8
6.3/8
6.3/8
0.9843
0.9843
0.9843
0.9843
0.9843
0.9843
0.9843
0.9843
1.1811
1.1811
1.1811
1.1811
1.1811
1.1811
1.1811
1.1811
1.4173
1.4173
1.4173
1.4173
1.4173
1.4173
1.4173
1.4173
2.1654
2.1654
2.1654
2.1654
2.1654
2.1654
2.5591
2.5591
2.5591
2.5591
2.5591
2.5591
0.4290
0.4290
0.4290
0.4290
0.4800
0.4800
0.4800
0.4800
0.5900
0.5900
0.5900
0.5900
0.6970
0.6970
0.6970
0.6970
0.8000
0.8000
0.8000
0.8000
0.8000
0.8000
0.8000
0.8000
0.8950
0.8950
0.8950
1.0210
1.0210
1.0210
1.1090
1.1090
1.1090
1.2330
1.2330
1.2330
a
Inch
0.3220
0.3220
0.3220
0.3220
0.3600
0.3600
0.3600
0.3600
0.4420
0.4420
0.4420
0.4420
0.5230
0.5230
0.5230
0.5230
0.6000
0.6000
0.6000
0.6000
0.6000
0.6000
0.6000
0.6000
0.6710
0.6710
0.6710
0.7650
0.7650
0.7650
0.8300
0.8300
0.8300
0.9250
0.9250
0.9250
#
Flutes Limits
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
33/64
22/64
33/64
33/64
37/64
37/64
37/64
37/64
11/16
11/16
11/16
11/16
13/16
13/16
13/16
13/16
59/64
59/64
59/64
59/64
59/64
59/64
59/64
59/64
1.3/64
1.3/64
1.3/64
1.5/32
1.5/32
1.5/32
1.9/32
1.9/32
1.9/32
1.27/64
1.27/64
1.27/64
12.90
12.90
12.90
12.90
14.50
14.50
14.50
14.50
17.50
17.50
17.50
17.50
20.40
20.40
20.40
20.40
23.25
23.50
23.25
23.25
23.25
23.50
23.50
23.50
26.50
26.50
26.50
29.50
29.50
29.50
32.75
32.75
32.75
36.00
36.00
36.00
Stock #
EDP #
or
e-Code
0349786
0349793
0349809
0349816
0349823
0349830
0349847
0349854
0349861
0349878
0349885
0351932
0349892
0349908
0349915
0349922
0349939
0349946
0349953
0349960
0349977
0349984
0349991
0350003
0388235
0388242
0388259
0388266
0388273
0388280
0388297
0388303
0388310
0388327
0388334
0388341
E0719/16NO1
E0719/16NO2
E0719/16NO3
E0719/16NO6
E0715/8NO1
E0715/8NO2
E0715/8NO3
E0715/8NO6
E0713/4NO1
E0713/4NO2
E0713/4NO3
E0713/4NO6
E0717/8NO1
E0717/8NO2
E0717/8NO3
E0717/8NO6
E0711X12NO1
E0711X12NO2
E0711X12NO3
E0711X12NO6
E0711X14NO1
E0711X14NO2
E0711X14NO3
E0711X14NO6
E0711.1/8NO1
E0711.1/8NO2
E0711.1/8NO3
E0711.1/4NO1
E0711.1/4NO2
E0711.1/4NO3
E0711.3/8NO1
E0711.3/8NO2
E0711.3/8NO3
E0711.1/2NO1
E0711.1/2NO2
E0711.1/2NO3
215
1528(UNC)
Ɣ Hand Tap
Ɣ Machine Screw Sizes
Ɣ For use in a wide variety of materials
and appropriate in either through or
blind hole applications
Ɣ Machos de mano
Tarauds à main
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1
1
1
1
2
2
2
2
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
4
4
4
4
5
5
5
5
6
6
6
6
6
6
6
6
6
64
64
64
64
56
56
56
56
56
56
56
56
56
48
48
48
48
48
40
40
40
40
40
40
40
40
40
40
40
40
40
32
32
32
32
32
32
32
32
32
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2“
2“
2“
2“
2“
2“
2“
2“
2“
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
216
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
2
2
2
2
2
3
3
3
2
2
3
3
3
3
2
3
3
3
2
3
3
3
2
2
3
3
3
2
3
3
3
2
3
3
3
2
2
3
3
3
B
P
T
P
P
B
P
T
B
P
B
P
T
P
P
B
P
T
P
B
P
T
B
P
B
P
T
P
T
B
P
P
B
P
T
B
P
B
P
T
1010601
1010599
1010598
1010600
1010614
1010612
1010610
1010608
1010617
1010615
1010613
1010611
1010609
1010626
1010631
1010629
1010627
1010625
1010649
1010647
1010645
1010643
1010652
1010650
1010648
1010646
1010644
1010666
1010660
1010664
1010662
1010684
1010681
1010678
1010675
1010688
1010685
1010682
1010679
1010676
H1
H1
H1
H2
H1
H1
H1
H1
H2
H2
H2
H2
H2
H1
H2
H2
H2
H2
H1
H1
H1
H1
H2
H2
H2
H2
H2
H2
H2
H2
H2
H1
H1
H1
H1
H2
H2
H2
H2
H2
1528(UNC)
Ɣ Hand Tap
Ɣ Machine Screw Sizes
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.220
0.220
0.220
l2
Ɣ Machos de mano
Tarauds à main
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.165
0.165
0.165
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
2
2
3
3
3
4
2
2
3
3
4
4
4
2
2
3
3
4
4
4
3
4
2
2
3
4
4
4
2
2
3
3
4
4
4
4
4
4
B
P
B
P
T
P
B
P
B
P
B
P
T
B
P
B
P
B
P
T
P
P
B
P
P
B
P
T
B
P
B
P
B
P
T
B
P
T
1010689
1010686
1010683
1010680
1010677
1010699
1010709
1010706
1010715
1010712
1010703
1010700
1010697
1010710
1010707
1010716
1010713
1010704
1010701
1010698
1010738
1010726
1010736
1010733
1010739
1010730
1010727
1010724
1010737
1010734
1010743
1010740
1010731
1010728
1010725
1010768
1010767
1010765
H3
H3
H3
H3
H3
H1
H2
H2
H2
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H1
H1
H2
H2
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
217
1528(UNF) - 1528(UNS)
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
0
0
0
0
0
1
1
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
5
6
6
6
6
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
80
80
80
80
80
72
72
72
72
72
64
64
64
56
56
56
48
48
48
44
44
44
44
40
40
40
40
36
36
36
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
28
28
28
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.11/16
1.11/16
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
1/2
9/16
9/16
9/16
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
15/16
15/16
15/16
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.194
0.220
0.220
0.220
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.165
0.165
0.165
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
2
3
3
3
2
3
3
3
4
4
4
2
4
2
2
3
3
4
4
4
2
2
3
3
4
4
4
4
4
4
H1
H1
H1
H2
H2
H1
H1
H1
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H1
H1
H2
H2
H2
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
B
P
T
B
P
B
P
T
B
P
B
P
T
B
P
T
B
P
T
P
B
P
T
P
B
P
T
B
P
T
P
P
B
P
B
P
B
P
T
B
P
B
P
B
P
T
B
P
T
1010596
1010594
1010593
1010597
1010595
1010606
1010604
1010603
1010607
1010605
1010621
1010620
1010618
1010637
1010636
1010634
1010656
1010655
1010653
1010673
1010672
1010671
1010669
1010694
1010693
1010692
1010690
1010720
1010719
1010717
1010753
1010747
1010757
1010754
1010763
1010760
1010751
1010748
1010745
1010758
1010755
1010764
1010761
1010752
1010749
1010746
1010772
1010771
1010769
1528(UNS)
l1
UNS
TPI
Inch
Inch
d2
Ø
Inch /
4
4
4
36
36
36
1.7/8
1.7/8
1.7/8
9/16
9/16
9/16
0.141
0.141
0.141
218
l2
l3
a
Inch
0.110
0.110
0.110
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3
3
3
B
P
T
1010642
1010641
1010640
H2
H2
H2
1528S(UNC) - (UNF) - (UNS)
Ɣ Hand Tap, Set of 3 pcs
Ɣ Set includes taper, plug, and
bottoming tap
Ɣ Tarauds à main - Jeu de 3
Ɣ Machos de mano, Juego de 3 piezas
1528S(UNF)
l1
l2
l3
UNC
TPI
Inch
Inch
Inch
d2
Ø
Inch
1
2
3
4
5
6
6
8
8
10
10
12
64
56
48
40
40
32
32
32
32
24
24
24
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
3/8
7/16
1/2
9/16
5/8
11/16
11/16
3/4
3/4
7/8
7/8
15/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
9/32
.1410
.1410
.1410
.1410
.1410
.1410
.1410
.1680
.1680
.1940
.1940
.2200
a
Inch
.1100
.1100
.1100
.1100
.1100
.1100
.1100
.1310
.1310
.1520
.1520
.1650
#
Flutes Limits
EDP #
or
e-Code
2
3
3
3
3
3
3
4
4
4
4
4
1011000
1011003
1011005
1011008
1011010
1011012
1011013
1011016
1011017
1011020
1011021
1011025
H1
H2
H2
H2
H2
H2
H3
H2
H3
H2
H3
H3
1528S(UNF)
l1
l2
l3
UNF
TPI
Inch
Inch
Inch
d2
Ø
Inch
0
1
2
3
4
5
6
8
10
10
12
80
72
64
56
48
44
40
36
32
32
28
1.5/8
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.3/8
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
7/8
15/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
9/32
.1410
.1410
.1410
.1410
.1410
.1410
.1410
.1680
.1940
.1940
.2200
a
Inch
.1100
.1100
.1100
.1100
.1100
.1100
.1100
.1310
.1520
.1520
.1650
#
Flutes Limits
EDP #
or
e-Code
2
2
3
3
3
3
3
4
4
4
4
H1
H1
H2
H2
H2
H2
H2
H2
H2
H3
H3
1010999
1011001
1011073
1011074
1011075
1011076
1011014
1011018
1011023
1011024
1011026
#
Flutes
Limits
EDP #
or
e-Code
3
H2
1011006
1528S(UNS)
l1
UNS
TPI
Inch
Inch
Inch
d2
Ø
Inch
4
36
1.7/8
9/16
3/16
.1410
l2
l3
a
Inch
.1100
219
1500(UNC)
Ɣ Hand Tap
applications
Ɣ Tarauds à main
Ɣ Machos de mano
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
20
20
20
20
20
20
20
20
20
20
20
18
18
18
18
18
18
18
18
16
16
16
16
16
16
16
16
14
14
14
14
14
14
13
13
13
13
13
13
13
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
1“
1“
1“
1“
1“
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.7/16
1.7/16
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.381
0.381
0.381
0.381
0.323
0.323
0.323
0.323
0.323
0.323
0.367
0.367
0.367
0.367
0.367
0.367
0.367
220
l2
l3
a
Inch
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.286
0.286
0.286
0.286
0.242
0.242
0.242
0.242
0.242
0.242
0.275
0.275
0.275
0.275
0.275
0.275
0.275
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
13/32
13/32
13/32
13/32
13/32
13/32
7/16
7/16
7/16
7/16
7/16
7/16
7/16
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
P
T
B
P
T
B
P
T
B
P
B
P
T
B
P
T
B
P
B
P
T
B
P
T
B
P
P
B
P
T
B
P
B
P
B
P
T
B
P
1010008
1010004
1010001
1010009
1010005
1010002
1010010
1010006
1010003
1010011
1010007
1010031
1010027
1010024
1010032
1010028
1010025
1010033
1010029
1010053
1010049
1010046
1010054
1010050
1010047
1010055
1010051
1010069
1010074
1010070
1010067
1010075
1010071
1010091
1010087
1010092
1010088
1010085
1010093
1010089
H1
H1
H1
H2
H2
H2
H3
H3
H3
H5
H5
H2
H2
H2
H3
H3
H3
H5
H5
H2
H2
H2
H3
H3
H3
H5
H5
H2
H3
H3
H3
H5
H5
H2
H2
H3
H3
H3
H5
H5
1500(UNC)
Ɣ Hand Tap
applications
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
12
12
12
12
11
11
11
11
11
11
10
10
10
10
10
10
9
9
9
9
8
8
8
8
8
7
7
7
7
7
7
7
7
6
6
6
6
6
6
6
6
3.19/32
3.19/32
3.19/32
3.19/32
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.11/16
4.11/16
4.11/16
4.11/16
5.1/8
5.1/8
5.1/8
5.1/8
5.1/8
5.7/16
5.7/16
5.7/16
5.7/16
5.3/4
5.3/4
5.3/4
5.3/4
6.1/16
6.1/16
6.1/16
6.1/16
6.3/8
6.3/8
6.3/8
6.3/8
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
2“
2“
2“
2“
2“
2“
2.7/32
2.7/32
2.7/32
2.7/32
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
3“
3“
3“
3“
3“
3“
3“
3“
0.429
0.429
0.429
0.429
0.480
0.480
0.480
0.480
0.480
0.480
0.590
0.590
0.590
0.590
0.590
0.590
0.697
0.697
0.697
0.697
0.800
0.800
0.800
0.800
0.800
0.896
0.896
0.896
0.896
1.021
1.021
1.021
1.021
1.100
1.100
1.100
1.100
1.230
1.230
1.230
1.230
l2
Ɣ Tarauds à main
Ɣ Machos de mano
l3
a
Inch
0.322
0.322
0.322
0.322
0.360
0.360
0.360
0.360
0.360
0.360
0.442
0.442
0.442
0.442
0.442
0.442
0.523
0.523
0.523
0.523
0.600
0.600
0.600
0.600
0.600
0.672
0.672
0.672
0.672
0.766
0.766
0.766
0.766
0.831
0.831
0.831
0.831
0.925
0.925
0.925
0.925
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
P
T
P
P
B
P
T
B
P
P
B
P
T
B
P
B
P
T
P
P
B
P
T
P
B
P
T
P
B
P
T
P
P
B
P
T
P
B
P
T
1010108
1010106
1010103
1010107
1010120
1010123
1010121
1010118
1010124
1010122
1010141
1010144
1010142
1010139
1010145
1010143
1010159
1010157
1010154
1010158
1010169
1010172
1010170
1010167
1010171
1010184
1010183
1010182
1013131
1010190
1010189
1010188
1013155
1013180
1010196
1010195
1010194
1013204
1010202
1010201
1010200
H3
H3
H3
H5
H2
H3
H3
H3
H5
H5
H2
H3
H3
H3
H5
H5
H4
H4
H4
H6
H2
H4
H4
H4
H6
H4
H4
H4
H9
H4
H4
H4
H9
H10
H4
H4
H4
H10
H4
H4
H4
221
1500(UNF)
Ɣ Hand Tap
applications
Ɣ Tarauds à main
Ɣ Machos de mano
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
28
28
28
28
28
28
28
28
28
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
20
20
20
20
20
20
20
20
20
20
20
20
18
18
18
18
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.19/32
3.19/32
3.19/32
3.19/32
1“
1“
1“
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.7/16
1.7/16
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.381
0.381
0.381
0.323
0.323
0.323
0.323
0.323
0.323
0.367
0.367
0.367
0.367
0.367
0.367
0.429
0.429
0.429
0.429
222
l2
l3
a
Inch
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.286
0.286
0.286
0.242
0.242
0.242
0.242
0.242
0.242
0.275
0.275
0.275
0.275
0.275
0.275
0.322
0.322
0.322
0.322
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
13/32
13/32
13/32
13/32
13/32
13/32
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
P
B
P
B
P
T
B
P
B
B
P
B
P
T
B
P
B
P
B
P
T
B
P
P
B
P
T
B
P
P
B
P
T
B
P
P
B
P
T
1010019
1010015
1010020
1010016
1010021
1010017
1010014
1010022
1010018
1010041
1010042
1010038
1010043
1010039
1010036
1010044
1010040
1010064
1010060
1010065
1010061
1010058
1010066
1010062
1010078
1010083
1010079
1010076
1010084
1010080
1010096
1010101
1010097
1010094
1010102
1010098
1010112
1010116
1010113
1010110
H1
H1
H2
H2
H3
H3
H3
H4
H4
H1
H2
H2
H3
H3
H3
H4
H4
H2
H2
H3
H3
H3
H4
H4
H2
H3
H3
H3
H5
H5
H2
H3
H3
H3
H5
H5
H2
H3
H3
H3
1500(UNF) - (UNS)
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
18
18
18
18
18
18
18
18
16
16
16
16
16
16
14
14
14
14
14
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
3.19/32
3.19/32
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.1/4
4.11/16
4.11/16
4.11/16
4.11/16
4.11/16
5.1/8
5.1/8
5.1/8
5.1/8
5.7/16
5.7/16
5.7/16
5.7/16
5.3/4
5.3/4
5.3/4
5.3/4
6.1/16
6.1/16
6.1/16
6.1/16
6.3/8
6.3/8
6.3/8
6.3/8
1.21/32
1.21/32
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
2“
2“
2“
2“
2“
2“
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.1/2
2.1/2
2.1/2
2.1/2
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
3“
3“
3“
3“
3“
3“
3“
3“
0.429
0.429
0.480
0.480
0.480
0.480
0.480
0.480
0.590
0.590
0.590
0.590
0.590
0.590
0.697
0.697
0.697
0.697
0.697
0.800
0.800
0.800
0.800
0.896
0.896
0.896
0.896
1.021
1.021
1.021
1.021
1.100
1.100
1.100
1.100
1.230
1.230
1.230
1.230
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1/2
1/2
9/16
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
13/16
13/16
13/16
13/16
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
4
6
6
6
4
6
6
6
6
B
P
P
B
P
T
B
P
P
B
P
T
B
P
P
B
P
T
P
B
P
T
P
B
P
T
P
B
P
T
P
B
P
T
P
B
P
T
P
1010117
1010114
1010127
1010131
1010128
1010125
1010132
1010129
1010148
1010152
1010149
1010146
1010153
1010150
1010162
1010166
1010163
1010160
1010164
1010175
1010174
1010173
1013105
1010187
1010186
1010185
1013141
1010193
1010192
1010191
1013166
1010199
1010198
1010197
1013190
1010205
1010204
1010203
1013214
l3
a
Inch
0.322
0.322
0.360
0.360
0.360
0.360
0.360
0.360
0.442
0.442
0.442
0.442
0.442
0.442
0.523
0.523
0.523
0.523
0.523
0.600
0.600
0.600
0.600
0.672
0.672
0.672
0.672
0.766
0.766
0.766
0.766
0.831
0.831
0.831
0.831
0.925
0.925
0.925
0.925
H5
H5
H2
H3
H3
H3
H5
H5
H2
H3
H3
H3
H5
H5
H2
H4
H4
H4
H6
H4
H4
H4
H7
H4
H4
H4
H7
H4
H4
H4
H8
H4
H4
H4
H8
H4
H4
H4
H8
1500(UNS)
l1
UNS
TPI
Inch
Inch
d2
Ø
Inch /
11/16
11/16
11/16
11/16
11/16
11/16
1“
1“
1“
11
11
11
16
16
16
14
14
14
4.1/32
4.1/32
4.1/32
4.1/32
4.1/32
4.1/32
5.1/8
5.1/8
5.1/8
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
2.1/2
2.1/2
2.1/2
0.542
0.542
0.542
0.542
0.542
0.542
0.800
0.800
0.800
l2
l3
a
Inch
0.406
0.406
0.406
0.406
0.406
0.406
0.600
0.600
0.600
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/8
5/8
5/8
5/8
5/8
5/8
13/16
13/16
13/16
4
4
4
4
4
4
4
4
4
T
P
B
T
P
B
B
P
T
1010133
1010134
1010135
1010136
1010137
1010138
1010181
1010178
1010176
H3
H3
H3
H3
H3
H3
H4
H4
H4
223
1500S(UNC) (UNF) (UNS)
Ɣ Set includes taper, plug, and
bottoming tap
1500S(UNC)
l1
l2
l3
UNC
TPI
Inch
Inch
Inch
d2
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
20
18
16
14
13
12
11
10
9
8
7
7
6
6
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
5.7/16
5.3/4
6.1/16
6.3/8
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
2.1/2
2.9/16
2.9/16
3“
3“
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
13/16
7/8
1“
1.1/16
1.1/8
0.2550
0.3180
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
0.8960
1.0210
1.1000
1.2300
a
Inch
0.1910
0.2380
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
0.6720
0.7660
0.8310
0.9250
#
Flutes
Limits
EDP #
or
e-Code
4
4
4
4
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
1011029
1011035
1011041
1011045
1011047
1011049
1011051
1011055
1011057
1011059
1011062
1011064
1011066
1011068
1500S(UNF)
l1
l2
l3
UNF
TPI
Inch
Inch
Inch
d2
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
28
24
24
20
20
18
18
16
14
12
12
12
12
12
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
5.7/16
5.3/4
6.1/16
6.3/8
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
2.1/2
2.9/16
2.9/16
3“
3“
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
13/16
7/8
1“
1.1/16
1.1/8
0.2550
0.3180
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
0.8960
1.0210
1.1000
1.2300
a
Inch
0.1910
0.2380
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
0.6720
0.7660
0.8310
0.9250
#
Flutes
Limits
EDP #
or
e-Code
4
4
4
4
4
4
4
4
4
4
4
6
6
6
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
1011032
1011038
1011044
1011046
1011048
1011050
1011052
1011056
1011058
1011060
1011063
1011065
1011067
1011069
#
Flutes
Limits
EDP #
or
e-Code
4
4
4
H3
H3
H4
1011053
1011054
1011061
1500S(UNS)
l1
UNS
TPI
Inch
Inch
Inch
d2
Ø
Inch
11/16
11/16
1“
11
16
14
4.1/32
4.1/32
5.1/8
1.13/16
1.13/16
2.1/2
5/8
5/8
13/16
0.5420
0.5420
0.8000
224
l2
l3
a
Inch
0.4060
0.4060
0.6000
1700(M)
Ɣ Hand Tap
Ɣ Tarauds à main
Ɣ Machos de mano
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
M1.6
M1.6
M1.6
M1.8
M1.8
M1.8
M2
M2
M2
M2.3
M2.3
M2.5
M2.5
M2.5
M2.6
M2.6
M2.6
M3
M3
M3
M3.5
M3.5
M3.5
M4
M4
M4
M4.5
M4.5
M4.5
M5
M5
M5
M6
M6
M6
M7
M7
M7
0.35
0.35
0.35
0.35
0.35
0.35
0.40
0.40
0.40
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.50
0.50
0.50
0.60
0.60
0.60
0.70
0.70
0.70
0.75
0.75
0.75
0.80
0.80
0.80
1.00
1.00
1.00
1.00
1.00
1.00
1.5/8
1.5/8
1.5/8
1.11/16
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.15/16
1.15/16
1.15/16
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
5/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
11/16
11/16
11/16
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
1“
1“
1“
1.1/8
1.1/8
1.1/8
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.194
0.194
0.255
0.255
0.255
0.318
0.318
0.318
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.152
0.152
0.191
0.191
0.191
0.238
0.238
0.238
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D3
D4
D4
D4
D4
D4
D4
D4
D4
D4
D4
D4
D4
D5
D5
D5
D5
D5
D5
T
P
B
T
P
B
T
P
B
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
1012408
1012409
1012410
1012411
1012412
1012413
1012414
1012415
1012416
1012421
1012422
1012423
1012424
1012425
1012426
1012427
1012428
1012432
1012433
1012434
1012435
1012436
1012437
1012441
1012442
1012443
1012444
1012445
1012446
1012453
1012454
1012455
1012459
1012460
1012461
1012465
1012466
1012467
225
1700(M)
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
M8
M8
M8
M8
M8
M8
M9
M9
M10
M10
M10
M10
M10
M10
M11
M11
M12
M12
M12
M12
M12
M12
M14
M14
M14
M14
M14
M14
M16
M16
M16
M16
M16
M16
M18
M18
M18
M18
M18
M18
M20
M20
M20
M20
M20
M20
M22
M22
M22
M22
M22
M22
M24
M24
M24
M24
M24
M24
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.25
1.25
1.25
1.75
1.75
1.75
1.50
1.50
1.50
2.00
2.00
2.00
1.50
1.50
1.50
2.00
2.00
2.00
1.50
1.50
1.50
2.50
2.50
2.50
1.50
1.50
1.50
2.50
2.50
2.50
1.50
1.50
1.50
2.50
2.50
2.50
2.00
2.00
2.00
3.00
3.00
3.00
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.3/8
3.19/32
3.19/32
3.19/32
3.19/32
3.19/32
3.19/32
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
4.1/32
4.1/32
4.1/32
4.1/32
4.1/32
4.1/32
4.15/32
4.15/32
4.15/32
4.15/32
4.15/32
4.15/32
4.11/16
4.11/16
4.11/16
4.11/16
4.11/16
4.11/16
4.29/32
4.29/32
4.29/32
4.29/32
4.29/32
4.29/32
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
1.13/16
2“
2“
2“
2“
2“
2“
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
2.7/32
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.381
0.381
0.381
0.381
0.323
0.323
0.367
0.367
0.367
0.367
0.367
0.367
0.429
0.429
0.429
0.429
0.429
0.429
0.480
0.480
0.480
0.480
0.480
0.480
0.542
0.542
0.542
0.542
0.542
0.542
0.652
0.652
0.652
0.652
0.652
0.652
0.697
0.697
0.697
0.697
0.697
0.697
0.760
0.760
0.760
0.760
0.760
0.760
226
l2
l3
a
Inch
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.286
0.286
0.286
0.286
0.242
0.242
0.275
0.275
0.275
0.275
0.275
0.275
0.322
0.322
0.322
0.322
0.322
0.322
0.360
0.360
0.360
0.360
0.360
0.360
0.406
0.406
0.406
0.406
0.406
0.406
0.489
0.489
0.489
0.489
0.489
0.489
0.523
0.523
0.523
0.523
0.523
0.523
0.570
0.570
0.570
0.570
0.570
0.570
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
13/32
13/32
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
T
P
B
T
P
B
P
B
T
P
B
T
P
B
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
T
P
B
1012468
1012469
1012470
1012471
1012472
1012473
1012478
1012479
1012480
1012481
1012482
1012483
1012484
1012485
1012493
1012494
1012498
1012499
1012500
1012495
1012496
1012497
1012501
1012502
1012503
1012504
1012505
1012506
1012513
1012514
1012515
1012516
1012517
1012518
1012522
1012523
1012524
1012525
1012526
1012527
1012534
1012535
1012536
1012537
1012538
1012539
1012540
1012541
1012542
1012543
1012544
1012545
1012546
1012547
1012548
1012555
1012556
1012557
D5
D5
D5
D5
D5
D5
D5
D5
D5
D5
D5
D6
D6
D6
D6
D6
D5
D5
D5
D6
D6
D6
D6
D6
D6
D7
D7
D7
D6
D6
D6
D7
D7
D7
D6
D6
D6
D7
D7
D7
D6
D6
D6
D7
D7
D7
D6
D6
D6
D7
D7
D7
D7
D7
D7
D8
D8
D8
1700(M) - 1700S
M
P
mm
l1
l2
Inch
Inch
d2
Ø
Inch /
M30
M30
M30
M36
M36
M36
3.50
3.50
3.50
4.00
4.00
4.00
5.7/16
5.7/16
5.7/16
6.1/16
6.1/16
6.1/16
2.9/16
2.9/16
2.9/16
3“
3“
3“
1.021
1.021
1.021
1.233
1.233
1.233
l3
a
Inch
0.766
0.766
0.766
0.925
0.925
0.925
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1“
1“
1“
1.1/8
1.1/8
1.1/8
4
4
4
4
4
4
T
P
B
T
P
B
1012570
1012571
1012572
1012573
1012574
1012575
D9
D9
D9
D9
D9
D9
1700S
l1
M
P
mm
Inch
Inch
Inch
d2
Ø
Inch
2
2.5
2.6
3
3.5
4
5
6
7
8
8
10
10
12
12
14
16
18
20
0.40
0.45
0.45
0.50
0.60
0.70
0.80
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
2.00
2.00
2.50
2.50
1.3/4
1.13/16
1.13/16
1.5/16
2“
2.1/8
2.3/8
2.1/2
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
3.19/32
3.13/16
4.1/32
4.15/32
7/16
1/2
1/2
5/8
11/16
3/4
7/8
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
2“
3/16
3/16
3/16
3/16
3/16
1/47
1/4
5/16
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
9/16
5/8
11/16
.1410
.1410
.1410
.1410
.1410
0.1680
0.1940
0.2550
0.3180
0.3180
0.3180
0.3810
0.3810
0.3670
0.3670
0.4290
0.4800
0.5420
0.6520
l2
l3
a
Inch
.1100
.1100
.1100
.1100
.1100
0.1310
0.1520
0.1910
0.2380
0.2380
0.2380
0.2860
0.2860
0.2750
0.2750
0.3220
0.3600
0.4060
0.4890
#
Flutes Limits
EDP #
or
e-Code
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1012558
1012560
1012559
1012561
1012562
1012563
1012564
1012565
1012576
1012577
1012566
1012578
1012567
1012579
1012568
1012580
1012581
1012582
1012583
D3
D3
D3
D4
D4
D4
D4
D5
D5
D5
D5
D5
D6
D5
D6
D7
D7
D7
D7
227
1500A(UNC) (UNF)
Ɣ Hand Tap
Ɣ Tarauds à main
Ɣ Machos de mano
1500A(UNC)
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
20
18
16
14
13
12
11
10
9
8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
1.000
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
2.1/2
0.255
0.318
0.381
0.323
0.367
0.429
0.480
0.590
0.697
0.800
l2
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.322
0.360
0.442
0.523
0.600
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
13/16
4
4
4
4
4
4
4
4
4
4
P
P
P
P
P
P
P
P
P
P
1050006
1050028
1050050
1050070
1050088
1050106
1050121
1050142
1050157
1050170
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
4
4
4
4
4
4
4
4
4
B
P
P
P
P
P
P
P
P
1050021
1050039
1050061
1050079
1050097
1050113
1050128
1050149
1050163
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
1500A(UNF)
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
28
24
24
20
20
18
18
16
14
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
1.000
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
0.255
0.318
0.381
0.323
0.367
0.429
0.480
0.590
0.697
228
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.322
0.360
0.442
0.523
H3
H3
H3
H3
H3
H3
H3
H3
H4
TN1500(UNC) (UNF)
Ɣ Hand Tap
Ɣ Tarauds à main
Ɣ Machos de mano
TN1500(UNC)
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
3/4
7/8
20
18
16
14
13
13
11
11
10
9
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.3/8
3.13/16
3.13/16
4.1/4
4.11/16
1.000
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
1.13/16
2“
2.7/32
0.255
0.318
0.381
0.323
0.367
0.367
0.480
0.480
0.590
0.697
l2
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.275
0.360
0.360
0.442
0.523
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
7/16
9/16
9/16
11/16
3/4
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
P
P
P
P
P
B
P
B
B
P
1060006
1060028
1060050
1060070
1060088
1060092
1060121
1060123
1060144
1060157
TN1500(UNF)
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
5/8
3/4
28
24
24
20
20
18
16
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.13/16
4.1/4
1.000
1.1/8
1.1/4
1.7/16
1.21/32
1.13/16
2“
0.255
0.318
0.381
0.323
0.367
0.480
0.590
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.360
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
9/16
11/16
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
P
P
P
P
P
B
B
1060017
1060039
1060061
1060079
1060097
1060131
1060152
229
1500L(UNC) (UNF)
Ɣ Hand Tap
Ɣ Left Hand
Ɣ Tarauds à main
Ɣ Machos de mano
1500L(UNC)
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
20
18
16
14
13
12
11
10
9
8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
2.1/2
0.255
0.318
0.381
0.323
0.367
0.429
0.480
0.590
0.697
0.800
l2
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.322
0.360
0.442
0.523
0.600
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
13/16
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
P
P
P
P
P
P
P
P
P
P
1011772
1011778
1011784
1011790
1011796
1011802
1011808
1011820
1011826
1011832
1500L(UNF)
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
28
24
24
20
20
18
18
16
14
12
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
2.1/2
0.255
0.318
0.381
0.323
0.367
0.429
0.480
0.590
0.697
0.800
230
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.322
0.360
0.442
0.523
0.600
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
13/16
4
4
4
4
4
4
4
4
4
4
P
P
P
P
P
P
P
P
P
P
1011775
1011781
1011787
1011793
1011799
1011805
1011811
1011823
1011829
1011835
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
1500L(UNS) - 1500OV(UNC)
Ɣ Hand Tap
Ɣ Left Hand
Ɣ Tarauds à main
Ɣ Machos de mano
1500L(UNS)
Ɣ
l1
l2
UNS
TPI
Inch
Inch
d2
Ø
Inch /
1“
14
5.1/8
2.1/2
0.800
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
13/16
4
H4
P
1011838
l3
a
Inch
0.600
1500OV(UNC)
Ɣ Hand Tap, .005” Oversize
applications
Ɣ Machos de mano
Ɣ Tarauds à main
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
5/8
20
18
16
14
13
11
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.13/16
1.000
1.1/8
1.1/4
1.7/16
1.21/32
1.13/16
0.255
0.318
0.381
0.323
0.367
0.480
l2
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
9/16
4
4
4
4
4
4
P
P
P
P
P
P
1011748
1011749
1011750
1011751
1011752
1011753
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.360
H11
H11
H11
H11
H11
H11
231
1508(UNC) (UNF)
Ɣ Hand Tap
Ɣ Optional Flutes
Ɣ Tarauds à main
Ɣ Machos de mano
1508(UNC)
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
1/2
20
20
18
18
16
16
14
13
13
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.3/8
3.3/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.21/32
1.21/32
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.367
0.367
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.275
0.275
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
7/16
7/16
3
3
3
3
3
3
3
3
3
B
P
B
P
B
P
P
B
P
1010219
1010216
1010233
1010230
1010243
1010240
1010248
1010253
1010252
H3
H3
H3
H3
H3
H3
H3
H3
H3
1508(UNF)
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
7/16
1/2
3/8
3/8
28
28
24
24
20
20
24
24
2.1/2
2.1/2
2.23/32
2.23/32
3.5/32
3.3/8
2.15/16
2.15/16
1“
1“
1.1/8
1.1/8
1.7/16
1.21/32
1.1/4
1.1/4
0.255
0.255
0.318
0.318
0.323
0.367
0.381
0.381
232
l2
l3
a
Inch
0.191
0.191
0.238
0.238
0.242
0.275
0.286
0.286
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
13/32
7/16
7/16
7/16
3
3
3
3
3
3
3
3
B
P
B
P
P
P
B
P
1010226
1010223
1010237
1010236
1010250
1010254
1010247
1010246
H3
H3
H3
H3
H3
H3
H3
H3
1595(UNC) (UNF)
Ɣ Hand Tap
Ɣ Tarauds à main
Ɣ Machos de mano
1595(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
20
20
18
18
2.1/2
2.1/2
2.23/32
2.23/32
1“
1“
1.1/8
1.1/8
0.255
0.255
0.318
0.318
l3
a
Inch
0.191
0.191
0.238
0.238
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
2
2
2
2
P
B
P
B
1010206
1010207
1010210
1010211
H3
H3
H3
H3
1595(UNF)
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
28
28
2.1/2
2.1/2
1“
1“
0.255
0.255
l2
l3
a
Inch
0.191
0.191
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
2
2
P
B
1010208
1010209
H3
H3
233
1505(UNC)
Ɣ Hand Tap, Eight-Pitch
Ɣ Tarauds à main, Eight-Pitch
Ɣ Machos de mano, Eight-Pitch
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
2.7/8
3“
3“
3“
8
8
8
8
8
8
8
8
8
9.1/4
9.1/4
9.1/4
9.1/4
9.1/4
9.1/4
9.3/4
9.3/4
9.3/4
4“
4“
4“
4“
4“
4“
4.9/16
4.9/16
4.9/16
2.350
2.350
2.350
2.475
2.475
2.475
2.668
2.668
2.668
234
l2
l3
a
Inch
1.762
1.762
1.762
1.856
1.856
1.856
2.001
2.001
2.001
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1.9/16
1.9/16
1.9/16
1.9/16
1.9/16
1.9/16
1.5/8
1.5/8
1.5/8
6
6
6
6
6
6
6
6
6
B
P
T
B
P
T
B
P
T
1013351
1013350
1013349
1013354
1013353
1013352
1013357
1013356
1013355
H8
H8
H8
H8
H8
H8
H8
H8
H8
1505(UNS)
Ɣ Hand Tap, Eight-Pitch
Ɣ Tarauds à main, Eight-Pitch
Ɣ Machos de mano, Eight-Pitch
Ɣ
l1
UNS
TPI
Inch
Inch
d2
Ø
Inch /
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
1.7/8
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/4
2.1/4
2.1/4
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
5.7/16
5.7/16
5.7/16
5.3/4
5.3/4
5.3/4
6.1/16
6.1/16
6.1/16
6.3/8
6.3/8
6.3/8
6.11/16
6.11/16
6.11/16
7“
7“
7“
7.5/16
7.5/16
7.5/16
7.5/8
7.5/8
7.5/8
8“
8“
8“
8.1/4
8.1/4
8.1/4
8.1/2
8.1/2
8.1/2
8.3/4
8.3/4
8.3/4
8.3/4
8.3/4
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
3“
3“
3“
3“
3“
3“
3.3/16
3.3/16
3.3/16
3.3/16
3.3/16
3.3/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
3.9/16
4“
4“
4“
4“
4“
4“
4“
4“
0.896
0.896
0.896
1.021
1.021
1.021
1.108
1.108
1.108
1.233
1.233
1.233
1.305
1.305
1.305
1.430
1.430
1.430
1.519
1.519
1.519
1.644
1.644
1.644
1.769
1.769
1.769
1.894
1.894
1.894
2.019
2.019
2.019
2.100
2.100
2.100
2.225
2.225
l2
l3
a
Inch
0.672
0.672
0.672
0.766
0.766
0.766
0.831
0.831
0.831
0.925
0.925
0.925
0.978
0.978
0.978
1.072
1.072
1.072
1.139
1.139
1.139
1.233
1.233
1.233
1.327
1.327
1.327
1.420
1.420
1.420
1.514
1.514
1.514
1.575
1.575
1.575
1.669
1.669
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
7/8
7/8
7/8
1“
1“
1“
1.1/16
1.1/16
1.1/16
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.3/8
1.7/16
1.7/16
1.7/16
1.7/16
1.7/16
1.7/16
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
T
B
P
1013312
1013311
1013310
1013315
1013314
1013313
1013318
1013317
1013316
1013321
1013320
1013319
1013324
1013323
1013322
1013327
1013326
1013325
1013330
1013329
1013328
1013333
1013332
1013331
1013336
1013335
1013334
1013339
1013338
1013337
1013342
1013341
1013340
1013345
1013344
1013343
1013348
1013347
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H6
H8
H8
235
1505(UNS) - 1572(UNC)
1505(UNS)
l1
l2
UNS
TPI
Inch
Inch
d2
Ø
Inch /
2.5/8
2.5/8
8
8
8.3/4
8.3/4
4“
4“
2.225
2.225
l3
a
Inch
1.669
1.669
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1.1/2
1.1/2
6
6
P
T
1013347
1013346
H8
H8
1572(UNC)
Ɣ Hand Tap
Ɣ Screw Thread Insert
Ɣ STI Taps are oversized so that the
thread they produce will accept a helical coil wire screw thread insert of the
same nominal size and pitch
Ɣ For use in aluminum, magnesium, and
non-ferrous materials
Ɣ Tarauds à main
Ɣ Machos de mano
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
4
6
6
8
8
10
10
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
40
40
32
32
32
32
24
24
20
20
18
18
16
16
14
13
2“
2“
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
3.19/32
3.13/16
11/16
11/16
7/8
7/8
15/16
15/16
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.21/32
1.21/32
1.21/32
1.13/16
0.141
0.141
0.194
0.194
0.220
0.220
0.255
0.255
0.318
0.318
0.381
0.381
0.367
0.367
0.429
0.480
236
l2
l3
a
Inch
0.110
0.110
0.152
0.152
0.165
0.165
0.191
0.191
0.238
0.238
0.286
0.286
0.275
0.275
0.322
0.360
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
1/4
1/4
9/32
9/32
5/16
5/16
3/8
3/8
7/16
7/16
7/16
7/16
1/2
9/16
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
P
1010419
1010421
1010427
1010429
1010435
1010437
1010438
1010440
1010451
1010453
1010458
1010460
1010466
1010468
1010474
1010482
H2
H2
H3
H3
H3
H3
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
1572(UNF) - U1511
Ɣ Hand Tap
Ɣ Screw Thread Insert
Ɣ STI Taps are oversized so that the
thread they produce will accept a helical coil wire screw thread insert of the
same nominal size and pitch
Ɣ For use in aluminum, magnesium, and
non-ferrous materials
Ɣ Tarauds à main
Ɣ Machos de mano
Ŷ
Ɣ
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
10
10
10
1/4
1/4
7/16
1/2
32
32
32
32
28
28
20
20
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
3.3/8
3.19/32
1“
1“
1“
1“
1.1/8
1.1/8
1.21/32
1.21/32
0.255
0.255
0.255
0.255
0.318
0.318
0.367
0.429
l3
a
Inch
0.191
0.191
0.191
0.191
0.238
0.238
0.275
0.322
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
3/8
3/8
7/16
1/2
3
3
3
3
3
3
4
4
P
B
P
B
P
B
P
P
1010442
1010444
1010443
1010445
1010454
1010456
1010478
1010486
H2
H2
H3
H3
H3
H3
H3
H3
U1511
Ɣ Tarauds à main
Ɣ Hand Tap
Ɣ Nut Style
Ɣ For use in medium to low carbon steel,
bronze, aluminum, and brass
Ɣ Taps have a relatively long shank
smaller than the minor diameter to
permit the accumulation of several
nuts after tapping
Ɣ Machos de mano
U1511
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
1/2
20
18
16
13
5“
5.1/2
6“
7“
1.5/8
1.13/16
2“
2.1/2
0.185
0.240
0.294
0.400
l2
l3
a
Inch
0.139
0.180
0.220
0.300
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
9/16
5/8
11/16
7/8
4
4
4
4
T
T
T
T
1010375
1010376
1010377
1010378
H3
H3
H3
H3
237
1519(UNC)
Ɣ Hand Tap
Ɣ Pulley Style
Ɣ These taps have the same major
and pitch diameters as standard
size taps, but with extended shanks
for reaching locations inaccessible
to regular length hand taps
Ɣ Tarauds à main
Ɣ Machos de mano
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
3/8
7/16
7/16
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
20
20
18
18
16
16
16
14
14
13
13
13
13
11
11
11
11
10
10
6“
8“
6“
8“
6“
8“
10“
6“
8“
6“
8“
10“
12“
6“
8“
10“
12“
10“
12“
1.000
1.000
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
1.13/16
1.13/16
2.000
2.000
0.255
0.255
0.318
0.318
0.381
0.381
0.381
0.444
0.444
0.507
0.507
0.507
0.507
0.633
0.633
0.633
0.633
0.759
0.759
238
l2
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.286
0.333
0.333
0.380
0.380
0.380
0.380
0.475
0.475
0.475
0.475
0.569
0.569
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
7/16
1/2
1/2
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
3/4
3/4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1010379
1010380
1010381
1010382
1010383
1010384
1010385
1010386
1010387
1010388
1010389
1010390
1010391
1010392
1010393
1010394
1010395
1010396
1010397
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
1600(UNC) (UNF)
Ɣ Hand Tap
Ɣ Designed for through or blind tapping
with a specific cutting geometry for gray
cast irons and those irons producing
broken chips
Ɣ Tarauds à main
Ɣ Machos de mano
1600(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
3/4
3/4
20
20
18
18
16
16
14
14
13
13
12
12
11
11
10
10
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
3.19/32
3.19/32
3.13/16
3.13/16
4.1/4
4.1/4
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
2“
2“
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
0.429
0.429
0.480
0.480
0.590
0.590
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
0.322
0.322
0.360
0.360
0.442
0.442
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
1/2
1/2
9/16
9/16
11/16
11/16
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1011256
1011257
1011260
1011261
1011264
1011265
1011268
1011269
1011272
1011273
1011276
1011277
1011280
1011281
1011284
1011285
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
1600(UNF)
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
3/4
3/4
28
28
24
24
24
24
20
20
20
20
18
18
18
18
16
16
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
3.19/32
3.19/32
3.13/16
3.13/16
4.1/4
4.1/4
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
2“
2“
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
0.429
0.429
0.480
0.480
0.590
0.590
l2
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
0.322
0.322
0.360
0.360
0.442
0.442
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
1/2
1/2
9/16
9/16
11/16
11/16
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1011258
1011259
1011262
1011263
1011266
1011267
1011270
1011271
1011274
1011275
1011278
1011279
1011282
1011283
1011286
1011287
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
H5
239
1599(UNC) (UNF)
Ɣ Hand Tap
with a specific cutting geometry for gray
cast irons and other irons producing
broken chips
Ɣ Tarauds à main
Ɣ Machos de mano
1599(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
3/4
3/4
20
20
18
18
16
16
14
14
13
13
12
12
11
11
10
10
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
3.19/32
3.19/32
3.13/16
3.13/16
4.1/4
4.1/4
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
2“
2“
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
0.429
0.429
0.480
0.480
0.590
0.590
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
0.322
0.322
0.360
0.360
0.442
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
1/2
1/2
9/16
9/16
11/16
11/16
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1010256
1010257
1010260
1010261
1010264
1010265
1010268
1010269
1010272
1010273
1010276
1010277
1010280
1010281
1010284
1010285
1599(UNF)
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
3/4
3/4
28
28
24
24
24
24
20
20
20
20
18
18
18
18
16
16
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
3.19/32
3.19/32
3.13/16
3.13/16
4.1/4
4.1/4
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
2“
2“
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
0.429
0.429
0.480
0.480
0.590
0.590
240
l2
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
0.322
0.322
0.360
0.360
0.442
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
1/2
1/2
9/16
9/16
11/16
11/16
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1010258
1010259
1010262
1010263
1010266
1010267
1010270
1010271
1010274
1010275
1010278
1010279
1010282
1010283
1010286
1010287
1599(M) - 1599SB(M)
Ɣ Hand Tap
with a specific cutting geometry for
gray cast irons and those irons
producing broken chips
Ɣ Tarauds à main
Ɣ Machos de mano
1599(M)
Ŷ
Ɣ
M
P
mm
l1
l2
Inch
Inch
d2
Ø
Inch /
M6
M6
M8
M8
M10
M10
M12
M12
M14
M18
1.00
1.00
1.25
1.25
1.50
1.50
1.75
1.75
1.50
1.50
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
3.19/32
4.1/32
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.21/32
1.21/32
1.21/32
1.13/16
0.255
0.255
0.318
0.318
0.381
0.381
0.367
0.367
0.429
0.542
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
7/16
7/16
1/2
5/8
4
4
4
4
4
4
4
4
4
4
D5
D5
D5
D5
D6
D6
D6
D6
D4
D4
P
B
P
B
P
B
P
B
P
P
1012256
1012266
1012258
1012268
1012260
1012270
1012262
1012272
1010288
1010289
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.275
0.275
0.322
0.406
1599SB(M)
Ɣ Machos de mano
Ɣ Tarauds à main
Ɣ Hand Tap
Ɣ SB = Semi-Bottoming
Ɣ Designed for through or blind
tapping with a specific cutting
geometry for gray cast irons and
those irons producing broken chips
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
M6
M8
M10
M12
1.00
1.25
1.50
1.75
2.1/2
2.23/32
2.15/16
3.3/8
1“
1.1/8
1.1/4
1.21/32
0.255
0.318
0.381
0.367
l2
l3
a
Inch
0.191
0.238
0.286
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
7/16
4
4
4
4
D5
D5
D6
D6
SB
SB
SB
SB
1012276
1012278
1012280
1012282
241
E059 - E053
Ɣ Machine Tap MTT-X, For Cast Iron
Ɣ MTT-X Machos de máquina
Ɣ MTT-X Tarauds machine
E059
Ŷ
Ɣ
UNC
TPI
d1
nom
mm
1/4
5/16
3/8
1/2
5/8
3/4
20
18
16
13
11
10
6.35
7.94
9.53
12.70
15.88
19.05
l1
l2
mm
mm
d2
Ø
mm
l3
66
72
80
89
102
112
13
16
18
22
24
29
6.30
8.00
10.00
9.00
12.50
14.00
a
mm
5.00
6.30
8.00
7.10
10.00
11.20
l4
mm
#
Flutes
8
9
11
10
13
14
3
3
3
3
3
3
mm
5.1
6.6
8
10.8
13.5
16.5
26
29
32
EDP #
or
Stock # e-Code
0607046
0607053
0607060
0607077
0607084
0607091
E0591/4
E0595/16
E0593/8
E0591/2
E0595/8
E0593/4
E053
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
14
16
20
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
48
53
58
66
72
80
89
95
102
112
12.5
14
11
13
16
18
22
24
24
29
3.15
4.00
5.00
6.30
8.00
10.00
9.00
11.20
12.50
14.00
242
l2
l3
a
mm
2.50
3.15
4.00
5.00
6.30
8.00
7.10
9.00
10.00
11.20
l4
mm
#
Flutes
5
6
7
8
9
11
10
12
13
14
3
4
4
4
4
4
4
4
4
4
mm
2.5
3.3
4.2
5
6.8
8.5
10.3
12
14
17.5
12.5
14
22
26
29
34
EDP #
or
Stock # e-Code
0606476
0606483
0606490
0606506
0606513
0606520
0606537
0606544
0606551
0606568
E053M3
E053M4
E053M5
E053M6
E053M8
E053M10
E053M12
E053M14
E053M16
E053M20
E054
Ŷ
Ɣ
MF
P
mm
l1
mm
mm
d2
Ø
mm
8
10
10
12
12
12
14
14
16
1.00
1.00
1.25
1.00
1.25
1.50
1.25
1.50
1.50
72
80
80
89
89
89
95
95
102
16
18
18
22
22
22
24
24
24
8.00
10.00
10.00
9.00
9.00
9.00
11.20
11.20
12.50
l2
l3
a
mm
6.30
8.00
8.00
7.10
7.10
7.10
9.00
9.00
10.00
l4
mm
#
Flutes
9
11
11
10
10
10
12
12
13
4
4
4
4
4
4
4
4
4
mm
7
9
8.8
11
10.8
10.5
12.8
12.5
14.5
29
34
34
EDP #
or
Stock # e-Code
0606575
0606582
0606599
0606605
0606612
0606629
0606636
0606643
0606650
E054M8X1.0
E054M10X1.0
E054M10X1.25
E054M12X1.0
E054M12X1.25
E054M12X1.5
E054M14X1.25
E054M14X1.5
E054M16X1.5
243
E500
Ɣ Machine Tap, Straight Flute
Ɣ Tarauds machine
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
1
1
1
1.2
1.2
1.2
1.4
1.4
1.4
1.6
1.6
1.6
1.6
1.7
1.7
1.7
1.7
1.8
1.8
1.8
1.8
2
2
2
2
2
2
2
2.2
2.2
2.2
2.2
2.3
2.3
2.3
2.3
2.5
2.5
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.40
0.40
0.40
0.40
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
38
38
38
38
38
38
40
40
40
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
4.5
4.5
4.5
4.5
4.5
4.5
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.80
2.80
2.80
2.80
2.80
2.80
2.80
2.80
2.80
2.80
244
l2
l4
l3
a
mm
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.24
2.24
2.24
2.24
2.24
2.24
2.24
2.24
2.24
2.24
mm
#
Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
0.75
0.75
0.75
0.95
0.95
0.95
1.1
1.1
1.1
1.25
1.25
1.25
1.25
1.35
1.35
1.35
1.35
1.45
1.45
1.45
1.45
1.6
1.6
1.6
1.6
1.55
1.55
1.55
1.75
1.75
1.75
1.75
1.85
1.85
1.85
1.85
2.05
2.05
mm
EDP #
or
Stock # e-Code
4.5
4.5
4.5
4.5
4.5
4.5
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
0160152
0160169
0122464
0160176
0160183
0122471
0160190
0160206
0122488
0155035
0139950
0093900
0155028
0155004
0093924
0093931
0154991
0154960
0093948
0093955
0154953
0094259
0094266
0094273
0154939
0160244
0160251
0160268
0154915
0094167
0094174
0154908
0154885
0094198
0094204
0154878
0154854
0094228
E500M1NO1
E500M1NO2
E500M1NO3
E500M1.2NO1
E500M1.2NO2
E500M1.2NO3
E500M1.4NO1
E500M1.4NO2
E500M1.4NO3
E500M1.6NO1
E500M1.6NO2
E500M1.6NO3
E500M1.6NO6
E500M1.7NO1
E500M1.7NO2
E500M1.7NO3
E500M1.7NO6
E500M1.8NO1
E500M1.8NO2
E500M1.8NO3
E500M1.8NO6
E500M2NO1
E500M2NO2
E500M2NO3
E500M2NO6
E500M2X.45NO1
E500M2X.45NO2
E500M2X.45NO3
E500M2.2NO1
E500M2.2NO2
E500M2.2NO3
E500M2.2NO6
E500M2.3NO1
E500M2.3NO2
E500M2.3NO3
E500M2.3NO6
E500M2.5NO1
E500M2.5NO2
E500
M
P
mm
l1
mm
mm
d2
Ø
mm
2.5
2.5
2.6
2.6
2.6
2.6
3
3
3
3
3
3
3
3.5
3.5
3.5
3.5
4
4
4
4
4
4
4
4.5
4.5
4.5
4.5
5
5
5
5
5
5
5
5
5.5
5.5
5.5
5.5
6
6
6
6
7
7
7
7
8
8
8
8
9
9
9
9
10
10
0.45
0.45
0.45
0.45
0.45
0.45
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.70
0.70
0.70
0.70
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.80
0.80
0.80
0.80
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.50
1.50
44.5
44.5
44.5
44.5
44.5
44.5
48
48
48
48
48
48
48
50
50
50
50
53
53
53
53
53
53
53
53
53
53
53
58
58
58
58
58
58
58
58
62
62
62
62
66
66
66
66
66
66
66
66
72
72
72
72
72
72
72
72
80
80
9.5
9.5
9.5
9.5
9.5
9.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
14
14
14
14
14
14
14
14
14
14
14
9.5
9.5
9.5
9.5
11
11
11
11
11
11
11
11
12
12
12
12
13
13
13
13
13
13
13
13
16
16
16
16
16
16
16
16
18
18
2.80
2.80
2.80
2.80
2.80
2.80
3.15
3.15
3.15
3.15
3.15
3.15
3.15
3.55
3.55
3.55
3.55
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.50
4.50
4.50
4.50
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
6.30
6.30
6.30
6.30
7.10
7.10
7.10
7.10
8.00
8.00
8.00
8.00
9.00
9.00
9.00
9.00
10.00
10.00
l2
l4
l3
a
mm
2.24
2.24
2.24
2.24
2.24
2.24
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.80
2.80
2.80
2.80
3.15
3.15
3.15
3.15
3.15
3.15
3.15
3.55
3.55
3.55
3.55
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
5.00
5.00
5.00
5.00
5.60
5.60
5.60
5.60
6.30
6.30
6.30
6.30
7.10
7.10
7.10
7.10
8.00
8.00
mm
#
Flutes
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
9
9
9
9
10
10
10
10
11
11
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2.05
2.05
2.15
2.15
2.15
2.15
2.5
2.5
2.5
2.5
2.4
2.4
2.4
2.9
2.9
2.9
2.9
3.3
3.3
3.3
3.3
3.25
3.25
3.25
3.8
3.8
3.8
3.8
4.2
4.2
4.2
4.2
4.1
4.1
4.1
4.1
4.6
4.6
4.6
4.6
5
5
5
5
6
6
6
6
6.8
6.8
6.8
6.8
7.8
7.8
7.8
7.8
8.5
8.5
mm
EDP #
or
Stock # e-Code
9.5
9.5
9.5
9.5
9.5
9.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
14
14
14
14
14
14
14
14
14
14
14
18
18
18
18
22
22
22
22
22
22
22
22
21
21
21
21
26
26
26
26
26
26
26
26
29
29
29
29
29
29
29
29
34
34
0094235
0154847
0156735
0156742
0122440
0156759
0154823
0094440
0094457
0094464
0159927
0159934
0159941
0094402
0094419
0094426
0154809
0154786
0094648
0094655
0094662
0160213
0160220
0160237
0154762
0094617
0094624
0154755
0154731
0094761
0094778
0154724
0159958
0159965
0159972
0159989
0159996
0160008
0160015
0160022
0094808
0094815
0094822
0154700
0154687
0139967
0094846
0094853
0154663
0094877
0094884
0094891
0154649
0152119
0094914
0154632
0153246
0093979
E500M2.5NO3
E500M2.5NO6
E500M2.6NO1
E500M2.6NO2
E500M2.6NO3
E500M2.6NO6
E500M3NO1
E500M3NO2
E500M3NO3
E500M3NO6
E500M3X.6NO1
E500M3X.6NO2
E500M3X.6NO3
E500M3.5NO1
E500M3.5NO2
E500M3.5NO3
E500M3.5NO6
E500M4NO1
E500M4NO2
E500M4NO3
E500M4NO6
E500M4X.75NO1
E500M4X.75NO2
E500M4X.75NO3
E500M4.5NO1
E500M4.5NO2
E500M4.5NO3
E500M4.5NO6
E500M5NO1
E500M5NO2
E500M5NO3
E500M5NO6
E500M5X.9NO1
E500M5X.9NO2
E500M5X.9NO3
E500M5X.9NO6
E500M5.5X.9NO1
E500M5.5X.9NO2
E500M5.5X.9NO3
E500M5.5X.9NO6
E500M6NO1
E500M6NO2
E500M6NO3
E500M6NO6
E500M7NO1
E500M7NO2
E500M7NO3
E500M7NO6
E500M8NO1
E500M8NO2
E500M8NO3
E500M8NO6
E500M9NO1
E500M9NO2
E500M9NO3
E500M9NO6
E500M10NO1
E500M10NO2
245
E500
M
P
mm
l1
mm
mm
d2
Ø
mm
10
10
11
11
11
11
11
12
12
12
14
14
14
14
16
16
16
16
18
18
18
18
20
20
20
20
22
22
22
22
24
24
24
24
27
27
27
30
30
30
33
33
33
36
36
36
39
39
39
42
42
42
45
45
45
48
48
48
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.75
1.75
1.75
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.50
3.50
3.50
3.50
3.50
3.50
4.00
4.00
4.00
4.00
4.00
4.00
4.50
4.50
4.50
4.50
4.50
4.50
5.00
5.00
5.00
80
80
85
85
85
85
85
89
89
89
95
95
95
95
102
102
102
102
112
112
112
112
112
112
112
112
118
118
118
118
130
130
130
130
135
135
135
138
138
138
151
151
151
162
162
162
170
170
170
170
170
170
187
187
187
187
187
187
18
18
19
19
19
19
19
22
22
22
24
24
24
24
24
24
24
24
29
29
29
29
29
29
29
29
29
29
29
29
35
35
35
35
35
35
35
41
41
41
41
41
41
47
47
47
47
47
47
53
53
53
54
54
54
60
60
60
10.00
10.00
8.00
8.00
8.00
8.00
8.00
9.00
9.00
9.00
11.20
11.20
11.20
11.20
12.50
12.50
12.50
12.50
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
16.00
16.00
16.00
16.00
18.00
18.00
18.00
18.00
20.00
20.00
20.00
20.00
20.00
20.00
22.40
22.40
22.40
25.00
25.00
25.00
28.00
28.00
28.00
28.00
28.00
28.00
31.50
31.50
31.50
31.50
31.50
31.50
246
l2
l4
l3
a
mm
8.00
8.00
6.30
6.30
6.30
6.30
6.30
7.10
7.10
7.10
9.00
9.00
9.00
9.00
10.00
10.00
10.00
10.00
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
12.50
12.50
12.50
12.50
14.00
14.00
14.00
14.00
16.00
16.00
16.00
16.00
16.00
16.00
18.00
18.00
18.00
20.00
20.00
20.00
22.40
22.40
22.40
22.40
22.40
22.40
25.00
25.00
25.00
25.00
25.00
25.00
mm
#
Flutes
11
11
9
9
9
9
9
10
10
10
12
12
12
12
13
13
13
13
14
14
14
14
14
14
14
14
16
16
16
16
18
18
18
18
20
20
20
20
20
20
22
22
22
24
24
24
26
26
26
26
26
26
28
28
28
28
28
28
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
mm
8.5
8.5
9.5
9.5
9.5
9.5
9.5
10.3
10.3
10.3
12
12
12
12
14
14
14
14
15.5
15.5
15.5
15.5
17.5
17.5
17.5
17.5
19.5
19.5
19.5
19.5
21
21
21
21
24
24
24
26.5
26.5
26.5
29.5
29.5
29.5
32
32
32
35
35
35
37.5
37.5
37.5
40.5
40.5
40.5
43
43
43
34
34
EDP #
or
Stock # e-Code
0093986
0154618
0154595
0094006
0094013
0154588
0094020
0094037
0094044
0094051
0152980
0094075
0094082
0154540
0154526
0094105
0094112
0154519
0154496
0094136
0094143
0154489
0154465
0150719
0094297
0154458
0154434
0094310
0094327
0154427
0154403
0094341
0094358
0154397
0154366
0094365
0094372
0154359
0094488
0094495
0154342
0152225
0094525
0154335
0094549
0094556
0154328
0152232
0094587
0154311
0152249
0094686
0154304
0152256
0094709
0154298
0152263
0094730
E500M10NO3
E500M10NO6
E500M11NO1
E500M11NO2
E500M11NO3
E500M11NO6
E500M11NO8
E500M12NO2
E500M12NO3
E500M12NO6
E500M14NO1
E500M14NO2
E500M14NO3
E500M14NO6
E500M16NO1
E500M16NO2
E500M16NO3
E500M16NO6
E500M18NO1
E500M18NO2
E500M18NO3
E500M18NO6
E500M20NO1
E500M20NO2
E500M20NO3
E500M20NO6
E500M22NO1
E500M22NO2
E500M22NO3
E500M22NO6
E500M24NO1
E500M24NO2
E500M24NO3
E500M24NO6
E500M27NO1
E500M27NO2
E500M27NO3
E500M30NO1
E500M30NO2
E500M30NO3
E500M33NO1
E500M33NO2
E500M33NO3
E500M36NO1
E500M36NO2
E500M36NO3
E500M39NO1
E500M39NO2
E500M39NO3
E500M42NO1
E500M42NO2
E500M42NO3
E500M45NO1
E500M45NO2
E500M45NO3
E500M48NO1
E500M48NO2
E500M48NO3
E500 - E501
M
P
mm
l1
l2
mm
mm
d2
Ø
mm
52
52
52
56
5.00
5.00
5.00
5.50
200
200
200
200
60
60
60
60
35.50
35.50
35.50
35.50
l3
a
mm
28.00
28.00
28.00
28.00
l4
mm
#
Flutes
31
31
31
31
6
6
6
6
mm
47
47
47
50.5
0153253
0152270
0094792
0122457
E500M52NO1
E500M52NO2
E500M52NO3
E500M56NO3
Ɣ Tarauds machine
Ɣ Machine Tap
Ɣ Straight Flute, Left Hand
EDP #
or
Stock # e-Code
E501
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
3
3
3
4
4
4
5
5
5
6
6
6
8
8
8
10
10
10
12
12
12
14
14
14
16
16
16
18
18
20
20
20
22
22
24
24
0.50
0.50
0.50
0.70
0.70
0.70
0.80
0.80
0.80
1.00
1.00
1.00
1.25
1.25
1.25
1.50
1.50
1.50
1.75
1.75
1.75
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
48
48
48
53
53
53
58
58
58
66
66
66
72
72
72
80
80
80
89
89
89
95
95
95
102
102
102
112
112
112
112
112
118
118
130
130
12.5
12.5
12.5
14
14
14
11
11
11
13
13
13
16
16
16
18
18
18
22
22
22
24
24
24
24
24
24
29
29
29
29
29
29
29
35
35
3.15
3.15
3.15
4.00
4.00
4.00
5.00
5.00
5.00
6.30
6.30
6.30
8.00
8.00
8.00
10.00
10.00
10.00
9.00
9.00
9.00
11.20
11.20
11.20
12.50
12.50
12.50
14.00
14.00
14.00
14.00
14.00
16.00
16.00
18.00
18.00
l2
l3
a
mm
2.50
2.50
2.50
3.15
3.15
3.15
4.00
4.00
4.00
5.00
5.00
5.00
6.30
6.30
6.30
8.00
8.00
8.00
7.10
7.10
7.10
9.00
9.00
9.00
10.00
10.00
10.00
11.20
11.20
11.20
11.20
11.20
12.50
12.50
14.00
14.00
l4
mm
#
Flutes
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
11
11
11
10
10
10
12
12
12
13
13
13
14
14
14
14
14
16
16
18
18
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
mm
2.5
2.5
2.5
3.3
3.3
3.3
4.2
4.2
4.2
5
5
5
6.8
6.8
6.8
8.5
8.5
8.5
10.3
10.3
10.3
12
12
12
14
14
14
15.5
15.5
17.5
17.5
17.5
19.5
19.5
21
21
12.5
12.5
12.5
14
14
14
22
22
22
26
26
26
29
29
29
34
34
34
EDP #
or
Stock # e-Code
0159828
0095058
0095065
0159835
0095072
0095089
0159842
0095096
0095102
0159859
0095119
0095126
0159866
0095133
0095140
0159873
0094938
0094945
0159880
0094952
0094969
0159897
0094976
0094983
0159903
0094990
0095003
0152423
0095010
0159910
0095027
0095034
0152430
0122495
0152447
0095041
E501M3NO1
E501M3NO2
E501M3NO3
E501M4NO1
E501M4NO2
E501M4NO3
E501M5NO1
E501M5NO2
E501M5NO3
E501M6NO1
E501M6NO2
E501M6NO3
E501M8NO1
E501M8NO2
E501M8NO3
E501M10NO1
E501M10NO2
E501M10NO3
E501M12NO1
E501M12NO2
E501M12NO3
E501M14NO1
E501M14NO2
E501M14NO3
E501M16NO1
E501M16NO2
E501M16NO3
E501M18NO2
E501M18NO3
E501M20NO1
E501M20NO2
E501M20NO3
E501M22NO2
E501M22NO3
E501M24NO2
E501M24NO3
247
E513
Ɣ Machine Tap, Straight Flute
Ɣ Tarauds machine
Ɣ
MF
P
mm
l1
mm
mm
d2
Ø
mm
3
3
3
3.5
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
7
7
7
8
8
8
8
8
8
8
8
8
9
9
0.35
0.35
0.35
0.35
0.50
0.50
0.50
0.50
0.50
0.50
0.75
0.75
0.75
0.50
0.50
0.50
0.75
0.75
0.75
0.75
0.75
0.75
0.50
0.50
0.50
0.75
0.75
0.75
1.00
1.00
1.00
0.75
1.00
48
48
48
48
53
53
53
58
58
58
58
58
58
66
66
66
66
66
66
66
66
66
72
72
72
72
72
72
72
72
72
72
72
12.5
12.5
12.5
12.5
14
14
14
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
16
16
16
16
16
16
16
16
16
16
16
3.15
3.15
3.15
3.15
4.00
4.00
4.00
5.00
5.00
5.00
5.00
5.00
5.00
6.30
6.30
6.30
6.30
6.30
6.30
7.10
7.10
7.10
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
9.00
9.00
248
l2
l3
a
mm
2.50
2.50
2.50
2.50
3.15
3.15
3.15
4.00
4.00
4.00
4.00
4.00
4.00
5.00
5.00
5.00
5.00
5.00
5.00
5.60
5.60
5.60
6.30
6.30
6.30
6.30
6.30
6.30
6.30
6.30
6.30
7.10
7.10
l4
mm
#
Flutes
5
5
5
5
6
6
6
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
10
10
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2.65
2.65
2.65
3.2
3.5
3.5
3.5
4.5
4.5
4.5
4.3
4.3
4.3
5.5
5.5
5.5
5.3
5.3
5.3
6.3
6.3
6.3
7.5
7.5
7.5
7.3
7.3
7.3
7
7
7
8.3
8
mm
Stock #
EDP #
or
e-Code
12.5
12.5
12.5
12.5
14
14
14
22
22
22
22
22
22
26
26
26
26
26
26
26
26
26
29
29
29
29
29
29
29
29
29
29
29
0160039
0160046
0096567
0343111
0156766
0152454
0096680
0156728
0096727
0096734
0157046
0156773
0123027
0156780
0156797
0123034
0156803
0152461
0096765
0160053
0096789
0096796
0160060
0160077
0123058
0157053
0152478
0096802
0157060
0152485
0096826
0343128
0159644
E513M3X.35NO1
E513M3X.35NO2
E513M3X.35NO3
E513M3.5X.35NO3
E513M4X.5NO1
E513M4X.5NO2
E513M4X.5NO3
E513M5X.5NO1
E513M5X.5NO2
E513M5X.5NO3
E513M5X.75NO1
E513M5X.75NO2
E513M5X.75NO3
E513M6X.5NO1
E513M6X.5NO2
E513M6X.5NO3
E513M6X.75NO1
E513M6X.75NO2
E513M6X.75NO3
E513M7X.75NO1
E513M7X.75NO2
E513M7X.75NO3
E513M8X.5NO1
E513M8X.5NO2
E513M8X.5NO3
E513M8X.75NO1
E513M8X.75NO2
E513M8X.75NO3
E513M8X1.0NO1
E513M8X1.0NO2
E513M8X1.0NO3
E513M9X.75NO3
E513M9X1.0NO1
E513
MF
P
mm
l1
mm
mm
d2
Ø
mm
9
9
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12
12
12
12
13
14
14
14
14
14
14
14
14
14
14
14
15
15
16
16
1.00
1.00
0.50
0.75
0.75
0.75
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
0.75
0.75
0.75
1.00
1.00
1.00
1.25
0.75
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.00
1.00
72
72
80
80
80
80
80
80
80
80
80
80
80
80
85
85
85
85
85
85
85
89
89
89
89
89
89
89
89
89
89
89
89
89
95
95
95
95
95
95
95
95
95
95
95
95
95
102
102
16
16
18
18
18
18
18
18
18
18
18
18
18
18
19
19
19
19
19
19
19
22
22
22
22
22
22
22
22
22
22
22
22
22
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
9.00
9.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
12.50
12.50
l2
l4
l3
a
mm
7.10
7.10
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
6.30
6.30
6.30
6.30
6.30
6.30
6.30
7.10
7.10
7.10
7.10
7.10
7.10
7.10
7.10
7.10
7.10
7.10
7.10
7.10
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
10.00
10.00
mm
#
Flutes
10
10
11
11
11
11
11
11
11
11
11
11
11
11
9
9
9
9
9
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
12
13
13
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
mm
8
8
9.5
9.3
9.3
9.3
9
9
9
9
8.8
8.8
8.8
8.8
10.3
10.3
10.3
10
10
10
9.8
11.3
11
11
11
10.8
10.8
10.8
10.8
10.5
10.5
10.5
10.5
11.5
13
13
13
12.8
12.8
12.8
12.8
12.5
12.5
12.5
12.5
13.5
13.5
15
15
29
29
34
34
34
34
34
34
34
34
34
34
34
34
EDP #
or
Stock # e-Code
0155752
0096833
0343135
0160084
0160091
0123065
0157077
0152492
0096086
0157084
0157091
0152508
0096079
0157107
0160107
0160114
0123072
0159651
0096093
0096109
0343142
0343166
0157114
0152515
0096154
0157121
0152522
0096116
0157138
0157145
0096130
0096147
0157152
0343173
0156810
0152539
0096185
0156827
0152546
0096161
0156834
0156841
0152553
0096178
0156858
0096192
0096208
0156865
0152560
E513M9X1.0NO2
E513M9X1.0NO3
E513M10X.5NO3
E513M10X.75NO1
E513M10X.75NO2
E513M10X.75NO3
E513M10X1.0NO1
E513M10X1.0NO2
E513M10X1.0NO3
E513M10X1.0NO6
E513M10X1.25NO1
E513M10X1.25NO2
E513M10X1.25NO3
E513M10X1.25NO6
E513M11X.75NO1
E513M11X.75NO2
E513M11X.75NO3
E513M11X1.0NO1
E513M11X1.0NO2
E513M11X1.0NO3
E513M11X1.25NO3
E513M12X.75NO3
E513M12X1.0NO1
E513M12X1.0NO2
E513M12X1.0NO3
E513M12X1.25NO1
E513M12X1.25NO2
E513M12X1.25NO3
E513M12X1.25NO6
E513M12X1.5NO1
E513M12X1.5NO2
E513M12X1.5NO3
E513M12X1.5NO6
E513M13X1.5NO3
E513M14X1.0NO1
E513M14X1.0NO2
E513M14X1.0NO3
E513M14X1.25NO1
E513M14X1.25NO2
E513M14X1.25NO3
E513M14X1.25NO6
E513M14X1.5NO1
E513M14X1.5NO2
E513M14X1.5NO3
E513M14X1.5NO6
E513M15X1.5NO2
E513M15X1.5NO3
E513M16X1.0NO1
E513M16X1.0NO2
249
E513
MF
P
mm
l1
mm
mm
d2
Ø
mm
16
16
16
16
16
16
18
18
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
20
20
22
22
22
22
22
22
22
22
24
24
24
24
24
24
24
24
25
25
25
1.00
1.25
1.50
1.50
1.50
1.50
1.00
1.00
1.00
1.50
1.50
1.50
1.50
2.00
2.00
2.00
1.00
1.00
1.00
1.50
1.50
1.50
1.50
2.00
2.00
2.00
1.00
1.00
1.50
1.50
1.50
2.00
2.00
2.00
1.00
1.00
1.50
1.50
1.50
2.00
2.00
2.00
1.50
1.50
1.50
102
102
102
102
102
102
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
118
118
118
118
118
118
118
118
130
130
130
130
130
130
130
130
130
130
130
24
24
24
24
24
24
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
35
35
35
35
35
35
35
35
35
35
35
12.50
12.50
12.50
12.50
12.50
12.50
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
250
l2
l3
a
mm
10.00
10.00
10.00
10.00
10.00
10.00
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
11.20
12.50
12.50
12.50
12.50
12.50
12.50
12.50
12.50
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
l4
mm
#
Flutes
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
18
18
18
18
18
18
18
18
18
18
18
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
mm
15
14.8
14.5
14.5
14.5
14.5
17
17
17
16.5
16.5
16.5
16.5
16
16
16
19
19
19
18.5
18.5
18.5
18.5
18
18
18
21
21
20.5
20.5
20.5
20
20
20
23
23
22.5
22.5
22.5
22
22
22
23.5
23.5
23.5
EDP #
or
Stock # e-Code
0096246
0343203
0156872
0152577
0096222
0156889
0156896
0096277
0096284
0156902
0152584
0096260
0156919
0156926
0096307
0096314
0156933
0096345
0096352
0156940
0152591
0096338
0156957
0156964
0096376
0096383
0096406
0096413
0156971
0152607
0096390
0156988
0096420
0096437
0096475
0096482
0156995
0152614
0096451
0157008
0096499
0096505
0157015
0152621
0096512
E513M16X1.0NO3
E513M16X1.25NO3
E513M16X1.5NO1
E513M16X1.5NO2
E513M16X1.5NO3
E513M16X1.5NO6
E513M18X1.0NO1
E513M18X1.0NO2
E513M18X1.0NO3
E513M18X1.5NO1
E513M18X1.5NO2
E513M18X1.5NO3
E513M18X1.5NO6
E513M18X2.0NO1
E513M18X2.0NO2
E513M18X2.0NO3
E513M20X1.0NO1
E513M20X1.0NO2
E513M20X1.0NO3
E513M20X1.5NO1
E513M20X1.5NO2
E513M20X1.5NO3
E513M20X1.5NO6
E513M20X2.0NO1
E513M20X2.0NO2
E513M20X2.0NO3
E513M22X1.0NO2
E513M22X1.0NO3
E513M22X1.5NO1
E513M22X1.5NO2
E513M22X1.5NO3
E513M22X2.0NO1
E513M22X2.0NO2
E513M22X2.0NO3
E513M24X1.0NO2
E513M24X1.0NO3
E513M24X1.5NO1
E513M24X1.5NO2
E513M24X1.5NO3
E513M24X2.0NO1
E513M24X2.0NO2
E513M24X2.0NO3
E513M25X1.5NO1
E513M25X1.5NO2
E513M25X1.5NO3
E513
MF
P
mm
l1
mm
mm
d2
Ø
mm
25
26
26
27
27
27
28
28
30
30
30
30
32
32
32
33
33
35
35
36
36
36
36
36
39
39
40
40
42
42
42
45
45
48
48
48
50
50
1.50
1.50
1.50
1.50
1.50
2.00
1.50
1.50
1.50
1.50
2.00
2.00
1.50
1.50
1.50
2.00
2.00
1.50
1.50
1.50
2.00
2.00
3.00
3.00
3.00
3.00
1.50
1.50
1.50
1.50
3.00
1.50
1.50
1.50
2.00
3.00
1.50
1.50
130
130
130
135
135
135
138
138
138
138
138
138
151
151
151
151
151
162
162
162
162
162
162
162
170
170
170
170
170
170
170
187
187
187
187
187
187
187
35
35
35
35
35
35
35
35
41
41
41
41
41
41
41
41
41
47
47
47
47
47
47
47
47
47
53
53
53
53
53
54
54
60
60
60
60
60
18.00
18.00
18.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
22.40
22.40
22.40
22.40
22.40
25.00
25.00
25.00
25.00
25.00
25.00
25.00
28.00
28.00
28.00
28.00
28.00
28.00
28.00
31.50
31.50
31.50
31.50
31.50
31.50
31.50
l2
l3
a
mm
14.00
14.00
14.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
18.00
18.00
18.00
18.00
18.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
22.40
22.40
22.40
22.40
22.40
22.40
22.40
25.00
25.00
25.00
25.00
25.00
25.00
25.00
l4
mm
#
Flutes
18
18
18
20
20
20
20
20
20
20
20
20
22
22
22
22
22
24
24
24
24
24
24
24
26
26
26
26
26
26
26
28
28
28
28
28
28
28
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
mm
23.5
24.5
24.5
25.5
25.5
25
26.5
26.5
28.5
28.5
28
28
30.5
30.5
30.5
31
31
33.5
33.5
34.5
34
34
33
33
36
36
38.5
38.5
40.5
40.5
39
43.5
43.5
46.5
46
45
48.5
48.5
EDP #
or
Stock # e-Code
0157022
0096529
0096536
0155738
0123010
0123041
0096543
0096550
0096574
0096581
0155721
0123003
0157039
0155578
0096598
0096604
0096611
0096628
0096635
0343302
0152638
0096642
0096659
0096666
0152645
0096673
0155691
0096697
0155684
0096703
0343319
0155677
0096710
0343333
0343340
0343357
0155660
0096758
E513M25X1.5NO6
E513M26X1.5NO2
E513M26X1.5NO3
E513M27X1.5NO2
E513M27X1.5NO3
E513M27X2.0NO3
E513M28X1.5NO2
E513M28X1.5NO3
E513M30X1.5NO2
E513M30X1.5NO3
E513M30X2.0NO2
E513M30X2.0NO3
E513M32X1.5NO1
E513M32X1.5NO2
E513M32X1.5NO3
E513M33X2.0NO2
E513M33X2.0NO3
E513M35X1.5NO2
E513M35X1.5NO3
E513M36X1.5NO3
E513M36X2.0NO2
E513M36X2.0NO3
E513M36X3.0NO2
E513M36X3.0NO3
E513M39X3.0NO2
E513M39X3.0NO3
E513M40X1.5NO2
E513M40X1.5NO3
E513M42X1.5NO2
E513M42X1.5NO3
E513M42X3.0NO3
E513M45X1.5NO2
E513M45X1.5NO3
E513M48X1.5NO3
E513M48X2.0NO3
E513M48X3.0NO3
E513M50X1.5NO2
E513M50X1.5NO3
251
E025
Ɣ Machine Tap MTT-X, Spiral Point
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
6
8
10
12
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
1/2
9/16
5/8
3/4
7/8
1“
32
32
24
24
20
20
18
18
16
16
14
13
13
12
11
10
9
8
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.3/8
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
0.2610
0.2484
0.4303
0.4173
0.5075
0.5075
0.5939
0.5939
0.6020
0.6020
0.9055
0.9055
0.9055
0.9843
0.9843
1.1614
1.1614
1.3976
0.1410
0.1680
0.1940
0.2200
0.2550
0.2550
0.3180
0.3180
0.3810
0.3810
0.3230
0.3670
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
252
l2
l4
a
Inch
0.1100
0.1310
0.1520
0.1650
0.1910
0.1910
0.2380
0.2380
0.2860
0.2860
0.2420
0.2750
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
#
Flutes Limits
2
2
2
2
2
3
2
3
2
3
3
2
3
3
3
3
3
3
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
Inch
N36
N29
N25
N16
N7
N7
F
F
5/16
5/16
U
27/64
27/64
31/64
17/32
21/32
49/64
7/8
2.85
3.50
3.90
4.50
5.10
5.10
6.60
6.60
8.00
8.00
9.40
10.80
10.80
12.20
13.50
16.50
19.50
22.25
0.5938
0.6526
0.8434
0.8848
1.0073
1.0073
1.1891
1.1891
1.2915
1.2915
EDP #
or
Stock # e-Code
0581070
0581087
0581094
0581100
0581117
0581124
0581131
0581148
0581155
0581162
0581179
0581186
0581193
0581209
0581216
0581223
0581230
0581247
E0256-32
E0258-32
E02510-24
E02512-24
E0251/4
E0251/43FL
E0255/16
E0255/163FL
E0253/8
E0253/83FL
E0257/16
E0251/2
E0251/23FL
E0259/16
E0255/8
E0253/4
E0257/8
E0251
E035
Ŷ
Ɣ
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
6
8
10
12
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
1/2
9/16
5/8
3/4
7/8
1“
1“
40
36
32
28
28
28
24
24
24
24
20
20
20
18
18
16
14
12
14
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.3/8
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
5.1/8
0.2610
0.2484
0.4303
0.4173
0.5075
0.5075
0.5939
0.5939
0.6020
0.6020
0.9055
0.9055
0.9055
0.9843
0.9843
1.1614
1.1614
1.3976
1.3976
0.1410
0.1680
0.1940
0.2200
0.2550
0.2550
0.3180
0.3180
0.3810
0.3810
0.3230
0.3670
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
0.8000
l4
a
Inch
0.1100
0.1310
0.1520
0.1650
0.1910
0.1910
0.2380
0.2380
0.2860
0.2860
0.2420
0.2750
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
0.6000
#
Flutes Limits
2
2
2
2
2
3
2
3
2
3
3
2
3
3
3
3
3
3
3
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
mm
N33
N29
N21
N14
N3
N3
I
I
Q
Q
25/64
29/64
29/64
33/64
37/64
11/16
13/16
59/64
59/64
2.95
3.50
4.10
4.70
5.50
5.50
6.90
6.90
8.50
8.50
9.90
11.50
11.50
12.90
14.50
17.50
20.40
23.25
23.50
0.5938
0.6526
0.8434
0.8848
1.0073
1.0073
1.1891
1.1891
1.2915
1.2915
EDP #
or
Stock # e-Code
0581957
0581964
0581971
0581988
0581995
0582008
0582015
0582022
0582039
0582046
0582053
0582060
0582077
0582084
0582091
0582107
0582114
0582121
0582138
E0356-40
E0358-36
E03510-32
E03512-28
E0351/4
E0351/43FL
E0355/16
E0355/163FL
E0353/8
E0353/83FL
E0357/163FL
E0351/2
E0351/23FL
E0359/16
E0355/8
E0353/4
E0357/8
E0351-12
E0351-14
253
E026
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
2
4
5
6
8
10
12
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
7/16
1/2
1/2
1/2
9/16
5/8
5/8
3/4
7/8
1“
56
40
40
32
32
24
24
20
20
20
18
18
18
16
16
16
14
13
13
13
12
11
11
10
9
8
1.3/4
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
3.5/32
3.3/8
3.3/8
3.3/8
3.19/32
3.13/16
3.13/16
4.1/4
4.11/16
5.1/8
0.3140
0.6091
0.7404
0.2610
0.2484
0.4303
0.4173
0.5075
0.5075
0.5075
0.5939
0.5939
0.5939
0.6020
0.6020
0.6020
0.9055
0.9055
0.9055
0.9055
0.9843
0.9843
0.9843
1.1614
1.1614
1.3976
0.1410
0.1410
0.1410
0.1410
0.1680
0.1940
0.2200
0.2550
0.2550
0.2550
0.3180
0.3180
0.3180
0.3810
0.3810
0.3810
0.3230
0.3670
0.3670
0.3670
0.4290
0.4800
0.4800
0.5900
0.6970
0.8000
1)
l2
l4
a
Inch
0.1100
0.1100
0.1100
0.1100
0.1310
0.1520
0.1650
0.1910
0.1910
0.1910
0.2380
0.2380
0.2380
0.2860
0.2860
0.2860
0.2420
0.2750
0.2750
0.2750
0.3220
0.3600
0.3600
0.4420
0.5230
0.6000
#
Flutes Limits
2
2
2
2
2
2
2
2
3
3
2
3
3
2
3
3
3
2
3
3
3
3
3
3
3
3
H2
H2
H2
H2
H2
H3
H3
H3
H3
H11
H3
H3
H11
H3
H3
H11
H3
H3
H3
H11
H3
H3
H11
H4
H4
H4
Inch
N50
N43
N38
N36
N29
N25
N16
N7
N7
7
F
F
F
5/16
5/16
5/16
U
27/64
27/64
27/64
31/64
17/32
17/32
21/32
49/64
7/8
1.80
2.35
2.65
2.85
3.50
3.90
4.50
5.10
5.10
5.10
6.60
6.60
6.60
8.00
8.00
8.00
9.40
10.80
10.80
10.80
12.20
13.50
13.50
16.50
19.50
22.25
0.3140
0.6091
0.7404
0.5938
0.6526
0.8434
0.8848
1.0073
1.0073
1.0073
1.1891
1.1891
1.1891
1.2915
1.2915
1.2915
EDP #
or
Stock # e-Code
0583203
0581254
0581261
0581278
0581285
0581292
0581308
0581315
0581339
0581322
0581346
0581360
0581353
0581377
0581391
0581384
0581407
0581414
0581438
0581421
0581445
0581469
0581452
0581476
0581483
0581490
E0262-56
E0264-40
E0265-40
E0266-32
E0268-32
E02610-24
E02612-24
E0261/4
E0261/43FL
E0261/4H11
E0265/16
E0265/163FL
E0265/16H11
E0263/8
E0263/83FL
E0263/8H11
E0267/16
E0261/2
E0261/23FL
E0261/2H11
E0269/16
E0265/8
E0265/8H11
E0263/4
E0267/8
E0261
1)
1)
1)
1)
1)
Oversize +.005”, not 3B
254
E036
Ŷ
Ɣ
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
12
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
1/2
9/16
5/8
3/4
7/8
1“
1“
32
28
28
28
24
24
24
24
20
20
20
18
18
16
14
12
14
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.3/8
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
5.1/8
0.4303
0.4173
0.5075
0.5075
0.5939
0.5939
0.6020
0.6020
0.9055
0.9055
0.9055
0.9843
0.9843
1.1614
1.1614
1.3976
1.3976
0.1940
0.2200
0.2550
0.2550
0.3180
0.3180
0.3810
0.3810
0.3230
0.3670
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
0.8000
l4
a
Inch
0.1520
0.1650
0.1910
0.1910
0.2380
0.2380
0.2860
0.2860
0.2420
0.2750
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
0.6000
#
Flutes Limits
2
2
2
3
2
3
2
3
3
2
3
3
3
3
3
3
3
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
mm
N21
N14
N3
N3
I
I
Q
Q
25/64
29/64
29/64
33/64
37/64
11/16
13/16
59/64
59/64
4.10
4.70
5.50
5.50
6.90
6.90
8.50
8.50
9.90
11.50
11.50
12.90
14.50
17.50
20.40
23.25
23.50
0.8434
0.8848
1.0073
1.0073
1.1891
1.1891
1.2915
1.2915
EDP #
or
Stock # e-Code
0582145
0582152
0582169
0582176
0582183
0582190
0582206
0582213
0582220
0582237
0582244
0582251
0582268
0582275
0582282
0582299
0582305
E03610-32
E03612-28
E0361/4
E0361/43FL
E0365/16
E0365/163FL
E0363/8
E0363/83FL
E0367/163FL
E0361/2
E0361/23FL
E0369/16
E0365/8
E0363/4
E0367/8
E0361-12
E0361-14
255
E005
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
4
4
5
5
6
6
8
8
10
10
12
12
14
16
18
20
0.70
0.70
0.80
0.80
1.00
1.00
1.25
1.25
1.50
1.50
1.75
1.75
2.00
2.00
2.50
2.50
2.1/8
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
3.19/32
3.13/16
4.1/32
4.15/32
0.2484
0.2484
0.4303
0.4303
0.5075
0.5075
0.5939
0.5939
0.6020
0.6020
0.9055
0.9055
0.9843
0.9843
1.1614
1.1614
0.1680
0.1680
0.1940
0.1940
0.2550
0.2550
0.3180
0.3180
0.3810
0.3810
0.3670
0.3670
0.4290
0.4800
0.5420
0.6520
256
l2
l4
a
Inch
0.1310
0.1310
0.1520
0.1520
0.1910
0.1910
0.2380
0.2380
0.2860
0.2860
0.2750
0.2750
0.3220
0.3600
0.4060
0.4890
EDP #
or
Stock # e-Code
#
Flutes
2
3
2
3
2
3
2
3
2
3
2
3
3
3
3
3
3.3
3.3
4.2
4.2
5.0
5.0
6.8
6.8
8.5
8.5
10.3
10.3
12.0
14.0
15.5
17.5
0.6526
0.6526
0.8434
0.8434
1.0073
1.0073
1.1891
1.1891
1.2915
1.2915
N30
N30
N19
N19
N9
N9
H
H
Q
Q
Y
Y
15/32
35/64
39/64
11/16
0580301
0580318
0580325
0580332
0580349
0580356
0580363
0580370
0580387
0580394
0580400
0580417
0580424
0580431
0580448
0580455
E005M4
E005M43FL
E005M5
E005M53FL
E005M6
E005M63FL
E005M8
E005M83FL
E005M10
E005M103FL
E005M12
E005M123FL
E005M14
E005M16
E005M18
E005M20
E006
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
4
4
5
5
6
6
8
8
10
10
12
12
14
16
18
20
0.70
0.70
0.80
0.80
1.00
1.00
1.25
1.25
1.50
1.50
1.75
1.75
2.00
2.00
2.50
2.50
2.1/8
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
3.19/32
3.13/16
4.1/32
4.15/32
0.2484
0.2484
0.4303
0.4303
0.5075
0.5075
0.5939
0.5939
0.6020
0.6020
0.9055
0.9055
0.9843
0.9843
1.1614
1.1614
0.1680
0.1680
0.1940
0.1940
0.2550
0.2550
0.3180
0.3180
0.3810
0.3810
0.3670
0.3670
0.4290
0.4800
0.5420
0.6520
l2
l4
a
Inch
0.1310
0.1310
0.1520
0.1520
0.1910
0.1910
0.2380
0.2380
0.2860
0.2860
0.2750
0.2750
0.3220
0.3600
0.4060
0.4890
EDP #
or
Stock # e-Code
#
Flutes
2
3
2
3
2
3
2
3
2
3
2
3
3
3
3
3
3.3
3.3
4.2
4.2
5.0
5.0
6.8
6.8
8.5
8.5
10.3
10.3
12.0
14.0
15.5
17.5
0.6526
0.6526
0.8434
0.8434
1.0073
1.0073
1.1891
1.1891
1.2915
1.2915
N30
N30
N19
N19
N9
N9
H
H
Q
Q
Y
Y
15/32
35/64
39/64
11/16
0580462
0583180
0580479
0580486
0580493
0580509
0580516
0583197
0580523
0580530
0580547
0580554
0580561
0580578
0580585
0580592
E006M4
E006M43FL
E006M5
E006M53FL
E006M6
E006M63FL
E006M8
E006M83FL
E006M10
E006M103FL
E006M12
E006M123FL
E006M14
E006M16
E006M18
E006M20
257
E015 - E016
Ɣ Machine Tap MTT-X
Ɣ Spiral Point
E015
Ŷ
Ɣ
MF
P
mm
l1
l2
Inch
Inch
d2
Ø
Inch /
8
10
14
18
1.00
1.00
1.50
1.50
2.23/32
2.15/16
3.19/32
4.1/32
0.5939
0.6020
0.9843
1.1614
0.3180
0.3810
0.4290
0.5420
l4
a
Inch
0.2380
0.2860
0.3220
0.4060
EDP #
or
Stock # e-Code
#
Flutes
3
3
3
3
7.0
9.0
12.5
16.5
1.1891
1.2915
J
T
31/64
41/64
0580912
0580929
0580936
0580943
E015M8X1.0
E015M10X1.0
E015M14X1.5
E015M18X1.5
E016
Ɣ Spiral Point
Ŷ
Ɣ
MF
P
mm
l1
Inch
Inch
d2
Ø
Inch /
8
10
14
18
1.00
1.00
1.50
1.50
2.23/32
2.15/16
3.19/32
4.1/32
0.5939
0.6020
0.9843
1.1614
0.3180
0.3810
0.4290
0.5420
258
l2
l4
a
Inch
0.2380
0.2860
0.3220
0.4060
EDP #
or
Stock # e-Code
#
Flutes
3
3
3
3
7.0
9.0
12.5
16.5
1.1891
1.2915
J
T
31/64
41/64
0580950
0580967
0580974
0580981
E016M8X1.0
E016M10X1.0
E016M14X1.5
E016M18X1.5
E000
Ɣ Spiral Point
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
3
3.5
4
5
6
8
10
12
14
16
18
20
22
24
0.50
0.60
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.50
2.50
3.00
48
50
53
58
66
72
80
89
95
102
112
112
118
130
15
16
17
11
13
16
18
22
24
24
29
29
29
35
3.15
3.55
4.00
5.00
6.30
8.00
10.00
9.00
11.20
12.50
14.00
14.00
16.00
18.00
l2
l3
a
mm
2.50
2.80
3.15
4.00
5.00
6.30
8.00
7.10
9.00
10.00
11.20
11.20
12.50
14.00
l4
mm
#
Flutes
5
5
6
7
8
9
11
10
12
13
14
14
16
18
3
3
3
3
3
3
3
3
3
3
4
4
4
4
mm
2.5
2.9
3.3
4.2
5.0
6.8
8.5
10.3
12.0
14.0
15.5
17.5
19.5
21.0
12.5
14
14
22
26
29
34
EDP #
or
Stock # e-Code
0567586
0567593
0567609
0567616
0567623
0567630
0567647
0567654
0567661
0567678
0567685
0567692
0567708
0567715
E000M3
E000M3.5
E000M4
E000M5
E000M6
E000M8
E000M10
E000M12
E000M14
E000M16
E000M18
E000M20
E000M22
E000M24
259
E001
Ɣ Spiral Point
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
3
3.5
4
5
6
8
10
12
14
16
18
20
22
24
0.50
0.60
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.50
2.50
3.00
48
50
53
58
66
72
80
89
95
102
112
112
118
130
15
16
17
11
13
16
18
22
24
24
29
29
29
35
3.15
3.55
4.00
5.00
6.30
8.00
10.00
9.00
11.20
12.50
14.00
14.00
16.00
18.00
260
l2
l3
a
mm
2.50
2.80
3.15
4.00
5.00
6.30
8.00
7.10
9.00
10.00
11.20
11.20
12.50
14.00
l4
mm
#
Flutes
5
5
6
7
8
9
11
10
12
13
14
14
16
18
3
3
3
3
3
3
3
3
3
3
4
4
4
4
mm
2.5
2.9
3.3
4.2
5.0
6.8
8.5
10.3
12.0
14.0
15.5
17.5
19.5
21.0
12.5
14
14
22
26
29
34
EDP #
or
Stock # e-Code
0567722
0567739
0567746
0567753
0567760
0567777
0567784
0567791
0567807
0567814
0567821
0567838
0567845
0567852
E001M3
E001M3.5
E001M4
E001M5
E001M6
E001M8
E001M10
E001M12
E001M14
E001M16
E001M18
E001M20
E001M22
E001M24
E010
Ɣ Spiral Point
Ŷ
Ɣ
MF
P
mm
l1
mm
mm
d2
Ø
mm
4
5
6
6
8
8
10
10
12
12
12
14
14
14
16
16
18
18
20
20
20
22
24
24
0.50
0.50
0.50
0.75
0.75
1.00
1.00
1.25
1.00
1.25
1.50
1.00
1.25
1.50
1.00
1.50
1.00
1.50
1.00
1.50
2.00
1.50
1.50
2.00
53
58
66
66
72
72
80
80
89
89
89
95
95
95
102
102
112
112
112
112
112
118
130
130
17
11
13
13
16
16
18
18
22
22
22
24
24
24
24
24
29
29
29
29
29
29
35
35
4.00
5.00
6.30
6.30
8.00
8.00
10.00
10.00
9.00
9.00
9.00
11.20
11.20
11.20
12.50
12.50
14.00
14.00
14.00
14.00
14.00
16.00
18.00
18.00
l2
l3
a
mm
3.15
4.00
5.00
5.00
6.30
6.30
8.00
8.00
7.10
7.10
7.10
9.00
9.00
9.00
10.00
10.00
11.20
11.20
11.20
11.20
11.20
12.50
14.00
14.00
l4
mm
#
Flutes
6
7
8
8
9
9
11
11
10
10
10
12
12
12
13
13
14
14
14
14
14
16
18
18
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
3.5
4.5
5.5
5.3
7.3
7.0
9.0
8.8
11.0
10.8
10.5
13.0
12.8
12.5
15.0
14.5
17.0
16.5
19.0
18.5
18.0
20.5
22.5
22.0
mm
Stock #
EDP #
or
e-Code
14
22
26
26
29
29
34
34
0568149
0568156
0568163
0568170
0568187
0568194
0568200
0568217
0568224
0568231
0568248
0568255
0568262
0568279
0568286
0568293
0568309
0568316
0568323
0568330
0568347
0568354
0568361
0568378
E010M4X.5
E010M5X.5
E010M6X.5
E010M6X.75
E010M8X.75
E010M8X1.0
E010M10X1.0
E010M10X1.25
E010M12X1.0
E010M12X1.25
E010M12X1.5
E010M14X1.0
E010M14X1.25
E010M14X1.5
E010M16X1.0
E010M16X1.5
E010M18X1.0
E010M18X1.5
E010M20X1.0
E010M20X1.5
E010M20X2.0
E010M22X1.5
E010M24X1.5
E010M24X2.0
261
E011
Ɣ Spiral Point
Ŷ
Ɣ
MF
P
mm
l1
mm
mm
d2
Ø
mm
4
5
6
6
8
8
10
10
12
12
12
14
14
14
16
16
18
18
20
20
20
22
24
24
0.50
0.50
0.50
0.75
0.75
1.00
1.00
1.25
1.00
1.25
1.50
1.00
1.25
1.50
1.00
1.50
1.00
1.50
1.00
1.50
2.00
1.50
1.50
2.00
53
58
66
66
72
72
80
80
89
89
89
95
95
95
102
102
112
112
112
112
112
118
130
130
17
11
13
13
16
16
18
18
22
22
22
24
24
24
24
24
29
29
29
29
29
29
35
35
4.00
5.00
6.30
6.30
8.00
8.00
10.00
10.00
9.00
9.00
9.00
11.20
11.20
11.20
12.50
12.50
14.00
14.00
14.00
14.00
14.00
16.00
18.00
18.00
262
l2
l3
a
mm
3.15
4.00
5.00
5.00
6.30
6.30
8.00
8.00
7.10
7.10
7.10
9.00
9.00
9.00
10.00
10.00
11.20
11.20
11.20
11.20
11.20
12.50
14.00
14.00
l4
mm
#
Flutes
6
7
8
8
9
9
11
11
10
10
10
12
12
12
13
13
14
14
14
14
14
16
18
18
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
3.5
4.5
5.5
5.3
7.3
7.0
9.0
8.8
11.0
10.8
10.5
13.0
12.8
12.5
15.0
14.5
17.0
16.5
19.0
18.5
18.0
20.5
22.5
22.0
mm
Stock #
EDP #
or
e-Code
14
22
26
26
29
29
34
34
0568385
0568392
0568408
0568415
0568422
0568439
0568446
0568453
0568460
0568477
0568484
0568491
0568507
0568514
0568521
0568538
0568545
0568552
0568569
0568576
0568583
0568590
0568606
0568613
E011M4X.5
E011M5X.5
E011M6X.5
E011M6X.75
E011M8X.75
E011M8X1.0
E011M10X1.0
E011M10X1.25
E011M12X1.0
E011M12X1.25
E011M12X1.5
E011M14X1.0
E011M14X1.25
E011M14X1.5
E011M16X1.0
E011M16X1.5
E011M18X1.0
E011M18X1.5
E011M20X1.0
E011M20X1.5
E011M20X2.0
E011M22X1.5
E011M24X1.5
E011M24X2.0
E045 - E049
Ɣ Spiral Point for stainless steel
E045
Ŷ
Ɣ
M
P
mm
l1
l2
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
16
20
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.50
48
53
58
66
72
80
89
102
112
15
17
11
13
16
18
22
24
29
3.15
4.00
5.00
6.30
8.00
10.00
9.00
12.50
14.00
l3
a
mm
2.50
3.15
4.00
5.00
6.30
8.00
7.10
10.00
11.20
l4
mm
#
Flutes
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
4
4
4
mm
2.5
3.3
4.2
5
6.8
8.5
10.3
14
17.5
12.5
14
22
26
29
34
EDP #
or
Stock # e-Code
0605790
0605806
0605813
0605820
0605837
0605844
0605851
0605868
0605875
E045M3
E045M4
E045M5
E045M6
E045M8
E045M10
E045M12
E045M16
E045M20
E049
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
16
20
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.50
48
53
58
66
72
80
89
102
112
12.5
14
11
13
16
18
22
24
29
3.15
4.00
5.00
6.30
8.00
10.00
9.00
12.50
14.00
l2
l3
a
mm
2.50
3.15
4.00
5.00
6.30
8.00
7.10
10.00
11.20
l4
mm
#
Flutes
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
3
3
4
mm
2.5
3.3
4.2
5.0
6.8
8.5
10.3
14.0
17.5
12.5
14
22
26
29
34
EDP #
or
Stock # e-Code
0606155
0606162
0606179
0606186
0606193
0606209
0606216
0606223
0606230
E049M3
E049M4
E049M5
E049M6
E049M8
E049M10
E049M12
E049M16
E049M20
263
E046 - E055
E046
Ŷ
Ɣ
M
P
mm
l1
l2
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
16
20
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.50
48
53
58
66
72
80
89
102
112
15
17
11
13
16
18
22
24
29
3.15
4.00
5.00
6.30
8.00
10.00
9.00
12.50
14.00
l3
a
mm
2.50
3.15
4.00
5.00
6.30
8.00
7.10
10.00
11.20
l4
mm
#
Flutes
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
4
4
4
mm
2.5
3.3
4.2
5
6.8
8.5
10.3
14
17.5
12.5
14
22
26
29
34
EDP #
or
Stock # e-Code
0605882
0605899
0605905
0605912
0605929
0605936
0605943
0605950
0605967
E046M3
E046M4
E046M5
E046M6
E046M8
E046M10
E046M12
E046M16
E046M20
E055
Ŷ
Ɣ
UNC
TPI
d1
nom
mm
4
6
8
10
1/4
5/16
3/8
1/2
5/8
3/4
40
32
32
24
20
18
16
13
11
10
2.85
3.51
4.17
4.83
6.35
7.94
9.53
12.70
15.88
19.05
264
l1
l2
mm
mm
d2
Ø
mm
48
50
53
58
66
72
80
89
102
112
12.5
14
9.5
11
13
16
18
22
24
29
3.15
3.55
4.50
5.00
6.30
8.00
10.00
9.00
12.50
14.00
l4
l3
a
mm
2.50
2.80
3.55
4.00
5.00
6.30
8.00
7.10
10.00
11.20
mm
#
Flutes
5
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
3
4
4
4
mm
2.35
2.85
3.5
3.9
5.1
6.6
8
10.8
13.5
16.5
12.5
14
17
20
26
29
32
EDP #
or
Stock # e-Code
0606667
0606674
0606681
0606698
0606704
0606711
0606728
0606735
0606742
0606759
E0554-40
E0556-32
E0558-32
E05510-24
E0551/4
E0555/16
E0553/8
E0551/2
E0555/8
E0553/4
E057 - E060
Ɣ Spiral Point for mild steel
E057
Ŷ
Ɣ
UNC
TPI
d1
nom
mm
6
8
10
1/4
5/16
3/8
1/2
5/8
3/4
32
32
24
20
18
16
13
11
10
3.505
4.166
4.826
6.350
7.938
9.525
12.700
15.875
19.050
l1
l2
mm
mm
d2
Ø
mm
l3
50
53
58
66
72
80
89
102
112
14
9.5
11
13
16
18
22
24
29
3.55
4.50
5.00
6.30
8.00
10.00
9.00
12.50
14.00
a
mm
2.80
3.55
4.00
5.00
6.30
8.00
7.10
10.00
11.20
l4
mm
#
Flutes
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
3
3
4
2.85
3.50
3.90
5.10
6.60
8.00
10.80
13.50
16.50
mm
Stock #
EDP #
or
e-Code
14
17
20
26
29
32
0606865
0606872
0606889
0606896
0606902
0606919
0606926
0606933
0606940
E0576-32
E0578-32
E05710-24
E0571/4
E0575/16
E0573/8
E0571/2
E0575/8
E0573/4
E060
Ŷ
Ɣ
UNF
TPI
d1
nom
mm
10
1/4
5/16
3/8
32
28
24
24
4.83
6.35
7.94
9.53
l1
mm
mm
d2
Ø
mm
58
66
72
80
11
13
16
18
5.00
6.30
8.00
10.00
l2
l3
a
mm
4.00
5.00
6.30
8.00
l4
mm
#
Flutes
7
8
9
11
3
3
3
3
4.1
5.5
6.9
8.5
mm
Stock #
EDP #
or
e-Code
20
26
29
32
0607107
0607114
0607121
0607138
E06010-32
E0601/4
E0605/16
E0603/8
265
1534(UNC)
Ɣ Machine Tap
Ɣ Spiral Point Taps, Relieved Style
Ɣ Features eccentric relieved threads
with full pitch diameter relief
Ɣ Freer cutting tap, resulting in much
longer tool life
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
5
5
5
6
6
6
6
6
8
8
8
8
8
10
10
10
10
10
12
12
40
40
40
32
32
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
1.15/16
1.15/16
1.15/16
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
15/16
15/16
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.194
0.220
0.220
266
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.152
0.165
0.165
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
H1
H2
H2
H1
H2
H2
H3
H3
H1
H2
H2
H3
H3
H1
H2
H2
H3
H3
H3
H3
P
B
P
P
B
P
B
P
P
B
P
B
P
P
B
P
B
P
B
P
1012700
1012357
1012356
1012359
1012363
1012360
1012364
1012361
1012368
1012372
1012369
1012373
1012370
1012376
1012379
1012377
1012380
1012378
1012699
1012389
1534(UNF)
Ɣ Machine Tap
Ɣ Features eccentric relieved threads with
full pitch diameter relief
longer tool life
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
5
6
6
8
10
10
10
10
10
12
44
40
40
36
32
32
32
32
32
28
1.15/16
2“
2“
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
5/8
11/16
11/16
3/4
7/8
7/8
7/8
7/8
7/8
15/16
0.141
0.141
0.141
0.168
0.194
0.194
0.194
0.194
0.194
0.220
l2
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
9/32
2
2
2
2
2
2
2
2
2
2
H2
H2
H2
H2
H1
H2
H2
H3
H3
H3
P
B
P
P
P
B
P
B
P
P
1012358
1012367
1012366
1012375
1012381
1012385
1012382
1012386
1012383
1012388
l3
a
Inch
0.110
0.110
0.110
0.131
0.152
0.152
0.152
0.152
0.152
0.165
267
1634(UNC) (UNF)
Ɣ Machine Tap
longer tool life
Ɣ Tarauds machine
1634(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
5
6
8
40
40
32
32
1.7/8
1.15/16
2“
2.1/8
9/16
5/8
11/16
3/4
0.141
0.141
0.141
0.168
l3
a
Inch
0.110
0.110
0.110
0.131
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
1/4
2
2
2
2
P
P
P
P
1011102
1011103
1011104
1011105
H2
H2
H2
H2
1634(UNF)
Ɣ Features eccentric relieved threads
with full pitch diameter relief
longer tool life
Ɣ Relieved Style
Ɣ Relieved Style
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
32
2.3/8
7/8
0.194
268
l2
l3
a
Inch
0.152
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1/4
2
P
1011106
H2
TN1534(UNC) (UNF)
Ɣ Machine Tap
longer tool life
Ɣ Tarauds machine
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
6
8
10
12
40
32
32
24
24
1.7/8
2“
2.1/8
2.3/8
2.3/8
9/16
11/16
3/4
7/8
15/16
0.141
0.141
0.168
0.194
0.220
l3
a
Inch
0.110
0.110
0.131
0.152
0.165
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
1/4
1/4
9/32
2
2
2
2
2
P
P
P
P
P
1060805
1062361
1062370
1062378
1062389
H2
H3
H3
H3
H3
TN1534(UNF)
longer tool life
Ɣ Relieved Style
Ɣ Relieved Style
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
32
2.3/8
7/8
0.194
l2
l3
a
Inch
0.152
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1/4
2
P
1062383
H3
269
1585(UNC)
Ɣ Machine Tap
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
20
20
20
20
20
20
20
18
18
18
18
18
18
18
16
16
16
16
14
14
14
13
13
13
13
11
11
10
10
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
3.13/16
3.13/16
4.1/4
4.1/4
1“
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
2“
2“
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.323
0.323
0.323
0.367
0.367
0.367
0.367
0.480
0.480
0.590
0.590
270
l2
l3
a
Inch
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.242
0.242
0.242
0.275
0.275
0.275
0.275
0.360
0.360
0.442
0.442
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
13/32
13/32
13/32
7/16
7/16
7/16
7/16
9/16
9/16
11/16
11/16
2
2
2
3
2
3
2
2
2
2
3
2
3
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
P
P
P
P
B
P
P
P
P
P
P
B
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1010290
1010291
1010292
1010295
1010294
1010296
1010293
1010304
1010305
1010306
1010309
1010308
1010310
1010307
1010318
1010319
1010320
1010321
1010327
1010328
1010329
1010334
1010335
1010336
1010337
1010342
1010343
1010344
1010345
H1
H2
H3
H3
H3
H5
H5
H1
H2
H3
H3
H3
H5
H5
H1
H2
H3
H5
H2
H3
H5
H1
H2
H3
H5
H3
H5
H3
H5
1585(UNF)
Ɣ Machine Tap
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
1/2
1/2
5/8
3/4
28
28
28
28
28
28
28
24
24
24
24
24
24
24
24
24
24
24
20
20
20
20
20
20
20
18
16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
3.13/16
4.1/4
1“
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
2“
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.323
0.323
0.323
0.367
0.367
0.367
0.367
0.480
0.590
l2
l3
a
Inch
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.242
0.242
0.242
0.275
0.275
0.275
0.275
0.360
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
13/32
13/32
13/32
7/16
7/16
7/16
7/16
9/16
11/16
2
2
3
2
2
2
3
2
2
3
2
2
3
2
3
3
3
3
3
3
3
3
3
3
3
3
3
H1
H2
H2
H3
H3
H4
H4
H1
H2
H2
H3
H3
H4
H4
H1
H2
H3
H4
H2
H3
H5
H1
H2
H3
H5
H3
H3
P
P
P
P
B
P
P
P
P
P
P
B
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1010297
1010298
1010302
1010299
1010301
1010300
1010303
1010311
1010312
1010316
1010313
1010315
1010317
1010314
1010322
1010323
1010324
1010325
1010331
1010332
1010333
1010338
1010339
1010340
1010341
1012774
1012775
271
1585A(UNC) (UNF)
Ɣ Machine Tap
Ɣ Tarauds machine
1585A(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
5/8
3/4
20
18
16
14
13
11
10
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.13/16
4.1/2
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.13/16
2“
0.255
0.318
0.381
0.323
0.367
0.480
0.590
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.360
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
9/16
11/16
2
2
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
P
P
P
P
P
P
P
1050292
1050306
1050320
1050328
1050336
1050342
1050344
1585A(UNF)
Ɣ Machine Tap
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
5/8
3/4
28
24
24
20
20
18
16
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.13/16
4.1/2
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.13/16
2“
0.255
0.318
0.381
0.323
0.367
0.480
0.590
272
l2
Ɣ Tarauds machine
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.360
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
9/16
11/16
2
2
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
P
P
P
P
P
P
P
1050299
1050313
1050324
1050332
1050340
1052774
1052775
TN1585(UNC) (UNF)
Ɣ Machine Tap
Ɣ Tarauds machine
TN1585(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
7/16
1/2
20
20
20
20
18
18
18
16
16
14
13
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.3/8
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.21/32
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.381
0.381
0.323
0.367
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
13/32
7/16
2
2
3
3
2
3
3
3
3
3
3
H3
H5
H3
H5
H3
H3
H5
H3
H5
H3
H3
P
P
P
P
P
P
P
P
P
P
P
1060292
1060293
1060295
1060296
1060306
1060309
1060310
1060320
1060321
1060328
1060336
l3
a
Inch
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.286
0.286
0.242
0.275
TN1585(UNF)
Ɣ Machine Tap
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
28
24
24
20
20
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
1“
1.1/8
1.1/4
1.7/16
1.21/32
0.255
0.318
0.381
0.323
0.367
l2
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
2
2
3
3
3
H3
H3
H3
H3
H3
P
P
P
P
P
1060299
1060313
1060324
1060332
1060340
273
1985(UNC) (UNF)
Ɣ Machine Tap
Ɣ DDX Spiral Point Taps, Relieved Style, High Hook
Ɣ Taps feature a high hook, special O.D. and
P.D. relief, and increased back taper
Ɣ For use in through hole applications where
a free-cutting action is required
Ɣ Tarauds machine
1985(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
9/16
5/8
11/16
3/4
7/8
15/16
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
2.1/2
0.141
0.141
0.141
0.168
0.194
0.220
0.255
0.318
0.381
0.323
0.367
0.429
0.480
0.590
0.697
0.800
l2
Inch
#
Flutes
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
1/4
1/4
9/32
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
13/16
2
2
2
2
2
2
2
3
3
3
3
3
3
3
4
4
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1013037
1013039
1013041
1013043
1013045
1013047
1013049
1013051
1013053
1013055
1013057
1013059
1013061
1013065
1013067
1013069
l3
a
Inch
0.110
0.110
0.110
0.131
0.152
0.165
0.191
0.238
0.286
0.242
0.275
0.322
0.360
0.442
0.523
0.600
1985(UNF)
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
48
44
40
36
32
28
28
24
24
20
20
18
18
16
14
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
9/16
5/8
11/16
3/4
7/8
15/16
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
2“
2.7/32
0.141
0.141
0.141
0.168
0.194
0.220
0.255
0.318
0.381
0.323
0.367
0.429
0.480
0.590
0.697
274
l3
a
Inch
0.110
0.110
0.110
0.131
0.152
0.165
0.191
0.238
0.286
0.242
0.275
0.322
0.360
0.442
0.523
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
1/4
1/4
9/32
5/16
3/8
7/16
13/32
7/16
1/2
9/16
11/16
3/4
2
2
2
2
2
2
2
3
3
3
3
3
3
3
4
2B
2B
2B
2B
2B
2B
2B
2B
2B
2B
2B
2B
2B
2B
2B
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1013038
1013040
1013042
1013044
1013046
1013048
1013050
1013052
1013054
1013056
1013058
1013060
1013062
1013066
1013068
1785M-TN1785
Ɣ Machine Tap
Ɣ Tarauds machine
1785M
Ŷ
Ɣ
M
P
mm
l1
l2
Inch
Inch
d2
Ø
Inch /
M2
M2.3
M2.5
M2.6
M3
M3.5
M4
M4.5
M5
M6
M7
M8
M9
M10
M11
M12
M14
M16
M18
0.40
0.45
0.45
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.25
1.25
1.50
1.50
1.75
2.00
2.00
2.50
1.3/4
1.3/4
1.13/16
1.13/16
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/32
7/16
7/16
1/2
1/2
5/8
11/16
3/4
7/8
7/8
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.21/32
1.21/32
1.13/16
1.13/16
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.194
0.194
0.255
0.318
0.318
0.381
0.381
0.323
0.367
0.429
0.480
0.542
l1
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.152
0.152
0.191
0.238
0.238
0.286
0.286
0.242
0.275
0.322
0.360
0.406
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
5/16
3/8
3/8
7/16
7/16
13/32
7/16
1/2
9/16
5/8
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
D3
D3
D3
D3
D3
D4
D4
D4
D4
D5
D5
D5
D5
D5
D6
D6
D7
D7
D7
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1012659
1012661
1012662
1012663
1012664
1012666
1012668
1012669
1012672
1012674
1012676
1012678
1012680
1012682
1012685
1012686
1012689
1012693
1012696
TN1785
Ŷ
Ɣ
M
P
mm
Inch
Inch
d2
Ø
Inch /
M4
M5
M6
M8
M10
M12
0.70
0.80
1.00
1.25
1.50
1.75
2.1/8
2.3/8
2.1/2
2.23/32
2.15/16
3.3/8
3/4
7/8
1“
1.1/8
1.1/4
1.21/32
0.168
0.194
0.255
0.318
0.381
0.367
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
1/4
1/4
5/16
3/8
7/16
7/16
2
2
2
2
3
3
D4
D4
D5
D5
D5
D6
P
P
P
P
P
P
1062668
1062672
1062674
1062678
1062682
1062686
l3
a
Inch
0.131
0.152
0.191
0.238
0.286
0.275
275
1534NR(UNC)
Ɣ Machine Tap
Ɣ Spiral Point Taps, Non-Relieved Style
Ɣ Recommended for older equipment
or manual feed rate applications where
the feed rate control is not sufficient
for a relieved style tap like our
1534/1585 series
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1
1
2
2
2
3
3
4
4
4
5
64
64
56
56
56
48
48
40
40
40
40
1.11/16
1.11/16
1.3/4
1.3/4
1.3/4
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.15/16
3/8
3/8
7/16
7/16
7/16
1/2
1/2
9/16
9/16
9/16
5/8
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
5
6
6
6
6
6
8
8
8
8
8
10
10
10
10
10
12
12
40
32
32
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
1.15/16
2“
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
5/8
11/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
15/16
15/16
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.194
0.220
0.220
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.152
0.165
0.165
276
l2
l3
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
2
2
2
2
2
2
2
2
2
2
2
H1
H2
H1
H2
H2
H2
H2
H1
H2
H2
H2
P
P
P
B
P
B
P
P
P
B
P
1010779
1010780
1010787
1010790
1010788
1010798
1010796
1010804
1010805
1010807
1010813
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
H2
H1
H2
H2
H3
H3
H1
H2
H2
H3
H3
H1
H2
H2
H3
H3
H3
H3
B
P
B
P
B
P
P
B
P
B
P
P
B
P
B
P
B
P
1010815
1010818
1010822
1010819
1010823
1010820
1010828
1010832
1010829
1010833
1010830
1010837
1010841
1010838
1010842
1010839
1011072
1011071
1534NR(UNF) (UNS)
Ɣ Machine Tap
1534/1585 series
Ɣ Tarauds machine
1534NR(UNF)
Ŷ
Ɣ
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
0
0
0
1
1
2
2
3
3
4
4
5
6
6
8
10
10
10
10
10
12
80
80
80
72
72
64
64
56
56
48
48
44
40
40
36
32
32
32
32
32
28
1.5/8
1.5/8
1.5/8
1.11/16
1.11/16
1.3/4
1.3/4
1.13/16
1.13/16
1.7/8
1.7/8
1.15/16
2“
2“
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
5/16
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
11/16
11/16
3/4
7/8
7/8
7/8
7/8
7/8
15/16
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.194
0.194
0.194
0.194
0.194
0.220
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.152
0.152
0.152
0.152
0.152
0.165
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
9/32
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
H1
H2
H2
H1
H2
H1
H2
H1
H2
H2
H2
H2
H2
H2
H2
H1
H2
H2
H3
H3
H3
P
B
P
P
P
P
P
P
P
B
P
P
B
P
P
P
B
P
B
P
P
1010775
1010778
1010776
1010783
1010784
1010791
1010792
1010799
1010800
1010811
1010809
1010817
1010827
1010825
1010835
1010843
1010847
1010844
1010848
1010845
1010853
1534NR(UNS)
l1
UNS
TPI
Inch
Inch
d2
Ø
Inch /
4
36
1.7/8
9/16
0.141
l2
l3
a
Inch
0.110
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
2
H2
P
1010803
277
1585NR(UNC)
Ɣ Machine Tap
the feed rate control is not sufficient for
a relieved style tap like our 1534/1585
series
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
20
20
20
20
20
20
20
18
18
18
18
18
18
18
16
16
16
16
14
14
14
13
13
13
13
11
11
10
10
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
3.13/16
3.13/16
4.1/2
4.1/2
1“
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
1.13/16
2“
2“
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.323
0.323
0.323
0.367
0.367
0.367
0.367
0.480
0.480
0.590
0.590
278
l2
l3
a
Inch
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.242
0.242
0.242
0.275
0.275
0.275
0.275
0.360
0.360
0.442
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
113/32
113/32
113/32
7/16
7/16
7/16
7/16
9/16
9/16
11/16
11/16
2
2
2
3
2
3
2
2
2
2
3
3
3
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
H1
H2
H3
H3
H3
H5
H5
H1
H2
H3
H3
H3
H5
H5
H1
H2
H3
H5
H2
H3
H5
H1
H2
H3
H5
H3
H5
H3
H5
P
P
P
P
B
P
P
P
P
P
P
B
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1012813
1012814
1012815
1012818
1012817
1012819
1012816
1012827
1012828
1012829
1012832
1012831
1012833
1012830
1012841
1012842
1012843
1012844
1012849
1012850
1012851
1012855
1012856
1012857
1012858
1012863
1012864
1012865
1012866
1585NR(UNF)
Ɣ Machine Tap
1534/1585 series
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
1/2
1/2
5/8
3/4
28
28
28
28
28
28
28
24
24
24
24
24
24
24
24
24
24
24
20
20
20
20
20
20
20
18
16
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.5/32
3.3/8
3.3/8
3.3/8
3.3/8
3.13/16
4.1/2
1“
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.7/16
1.21/32
1.21/32
1.21/32
1.21/32
1.13/16
2“
0.255
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.323
0.323
0.323
0.367
0.367
0.367
0.367
0.480
0.590
l2
l3
a
Inch
0.191
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.242
0.242
0.242
0.275
0.275
0.275
0.275
0.360
0.442
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
113/32
113/32
113/32
7/16
7/16
7/16
7/16
9/16
11/16
2
2
3
2
2
2
3
2
2
3
2
3
3
2
3
3
3
3
3
3
3
3
3
3
3
3
3
H1
H2
H2
H3
H3
H4
H4
H1
H2
H2
H3
H3
H4
H4
H1
H2
H3
H4
H2
H3
H5
H1
H2
H3
H5
H3
H3
P
P
P
P
B
P
P
P
P
P
P
B
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1012820
1012821
1012825
1012822
1012824
1012823
1012826
1012834
1012835
1012839
1012836
1012838
1012840
1012837
1012845
1012846
1012847
1012848
1012852
1012853
1012854
1012859
1012860
1012861
1012862
1012867
1012868
279
1593(UNC) (UNF)
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ Tarauds machine
Machine Tap
Spiral Point Taps, Relieved Style
.003”/.0035” Oversize
Used primarily where a part will be
plated or treated after tapping
1593(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
6
8
10
32
32
24
2“
2.1/8
2.3/8
11/16
3/4
7/8
0.141
0.168
0.194
l3
a
Inch
0.110
0.131
0.152
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
1/4
1/4
2
2
2
H7
H7
H7
P
P
P
1010877
1010879
1010881
1593(UNF)
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
32
2.3/8
7/8
0.194
280
l2
l3
a
Inch
0.152
Inch
#
Flutes Limits
Chamfer
EDP #
or
e-Code
1/4
2
P
1010883
H7
1585OV(UNC)
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ Tarauds machine
Machine Tap
Spiral Point Taps, Relieved Style
.005” Oversize
Used primarily where a part will be
plated or treated after tapping
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
5/16
3/8
7/16
1/2
5/8
20
18
16
14
13
11
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.13/16
1“
1.1/8
1.1/4
1.7/16
1.21/32
1.13/16
0.255
0.318
0.381
0.323
0.367
0.480
l2
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
3/8
7/16
13/32
7/16
9/16
2
2
3
3
3
3
H11
H11
H11
H11
H11
H11
P
P
P
P
P
P
1011754
1011755
1011756
1011757
1011758
1011759
l3
a
Inch
0.191
0.238
0.286
0.242
0.275
0.360
281
1785NR
Ɣ Machine Tap
Ɣ Recommended for applications requiring
close gauging fits and in older equipment
that is not sufficiently rigid to accomodate
the 1534/1585 series
Ɣ Tarauds machine
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
Inch
d2
Ø
Inch
1.6
2
2.3
2.5
2.6
3
3.5
4
4.5
5
6
7
8
10
12
14
16
18
20
0.35
0.40
0.40
0.45
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.50
1.5/8
1.3/4
1.3/4
1.13/16
1.13/16
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.23/32
2.15/16
3.3/8
3.19/32
3.13/16
4.1/32
4.15/32
5/16
7/16
7/16
1/2
1/2
5/8
11/16
3/4
7/8
7/8
1“
1.1/8
1.1/8
1.1/4
1.21/32
1.21/32
1.13/16
1.13/16
2“
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
5/16
3/8
3/8
7/16
7/16
1/2
9/16
5/8
11/16
0.1410
0.1410
0.1410
0.1410
0.1410
0.1410
0.1410
0.1380
0.1940
0.1940
0.2550
0.3180
0.3180
0.3810
0.3670
0.4290
0.4800
0.5420
0.6520
282
l2
l3
a
Inch
0.1100
0.1100
0.1100
0.1100
0.1100
0.1100
0.1100
0.1310
0.1520
0.1520
0.1910
0.2380
0.2380
0.2860
0.2750
0.3220
0.3600
0.4060
0.4890
#
Flutes Limits
EDP #
or
e-Code
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
1012890
1012891
1012892
1012893
1012894
1012896
1012897
1012898
1012899
1012900
1012901
1012902
1012903
1012904
1012905
1012906
1012907
1012908
1012909
D3
D3
D3
D3
D3
D3
D4
D4
D4
D4
D5
D5
D5
D6
D6
D7
D7
D7
D7
1534NE(UNC) (UNF)
Ɣ Machine Tap
Ɣ Spiral Point Taps, Extension Style,
Non-Relieved Style
Ɣ Recommended for applications requiring
close gauging fits and in older equipment
that is not sufficiently rigid to accomodate
the 1534/1585 series
Ɣ Tarauds machine
1534NE(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
6
6
8
8
10
10
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
40
32
32
32
32
24
24
20
20
18
18
16
16
14
13
4“
4“
6“
4“
6“
4“
6“
4“
6“
4“
6“
4“
6“
6“
6“
9/16
11/16
11/16
3/4
3/4
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.21/32
0.141
0.141
0.141
0.168
0.168
0.194
0.194
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.367
l3
a
Inch
0.110
0.110
0.110
0.131
0.131
0.152
0.152
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
13/32
7/16
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
1020002
1020004
1020006
1020008
1020010
1020012
1020014
1020020
1020022
1020028
1020030
1020036
1020038
1020044
1020048
1534NE(UNF)
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
10
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
32
32
28
28
24
24
24
24
20
20
4“
6“
4“
6“
4“
6“
4“
6“
6“
6“
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.21/32
0.194
0.194
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.367
l2
l3
a
Inch
0.152
0.152
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
13/32
7/16
2
2
2
2
2
2
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
P
P
P
P
P
P
P
P
P
1020016
1020018
1020024
1020026
1020032
1020034
1020040
1020042
1020046
1020050
283
1578(UNC) (UNF)
Ɣ Machine Tap
Ɣ Spiral Point Tap, Screw Thread Insert
Ɣ STI taps are oversize so that the thread
they produce will accept a helical coil
wire screw thread insert of the same
nominal size and pitch
Ɣ Tarauds machine
1578(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
6
6
8
8
1/4
1/4
40
32
32
32
32
20
20
2“
2.3/8
2.3/8
2.3/8
2.3/8
2.23/32
2.23/32
11/16
7/8
7/8
15/16
15/16
1.1/8
1.1/8
0.141
0.194
0.194
0.220
0.220
0.318
0.318
l3
a
Inch
0.110
0.152
0.152
0.165
0.165
0.238
0.238
Inch
#
Flutes
Limits
EDP #
or
e-Code
3/16
1/4
1/4
9/32
9/32
5/16
5/16
2
2
2
2
2
2
2
H2
H2
H3
H2
H3
H2
H3
1010491
1010494
1010495
1010498
1010499
1010506
1010507
1578(UNF)
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
1/4
1/4
32
28
28
2.1/2
2.23/32
2.23/32
1“
1.1/8
1.1/8
0.255
0.318
0.318
284
l2
l3
a
Inch
0.191
0.238
0.238
Inch
#
Flutes
Limits
EDP #
or
e-Code
9/32
5/16
5/16
2
2
2
H2
H2
H3
1010502
1010508
1010509
E027
Ɣ Spiral Flute
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
32
32
24
24
20
18
16
14
13
12
11
10
9
8
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
0.2610
0.2484
0.2650
0.2520
0.3937
0.4567
0.5315
0.6299
0.6890
0.7087
0.7087
0.8858
0.9843
1.1811
0.1410
0.1680
0.1940
0.2200
0.2550
0.3180
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
l2
l4
a
Inch
0.1100
0.1310
0.1520
0.1650
0.1910
0.2380
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
#
Flutes Limits
3
3
3
3
3
3
3
3
3
3
3
3
3
3
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
N36
N29
N25
N16
N7
F
5/16
U
27/64
31/64
17/32
21/32
49/64
7/8
2.85
3.50
3.90
4.50
5.10
6.60
8.00
9.40
10.80
12.20
13.50
16.50
19.50
22.25
Inch
Stock #
EDP #
or
e-Code
0.5938
0.6526
0.8434
0.8848
1.0993
1.3094
1.4415
0581506
0581513
0581520
0581537
0581544
0581551
0581568
0581575
0581582
0581599
0581605
0581612
0581629
0581636
E0276-32
E0278-32
E02710-24
E02712-24
E0271/4
E0275/16
E0273/8
E0277/16
E0271/2
E0279/16
E0275/8
E0273/4
E0277/8
E0271
285
E028
Ɣ Spiral Flute
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
5
6
8
10
12
1/4
5/16
3/8
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
40
40
32
32
24
24
20
18
16
16
14
13
12
11
10
9
8
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.15/16
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
0.6091
0.7404
0.2610
0.2484
0.2650
0.2520
0.3937
0.4567
0.5315
0.5315
0.6299
0.6890
0.7087
0.7087
0.8858
0.9843
1.1811
0.1410
0.1410
0.1410
0.1680
0.1940
0.2200
0.2550
0.3180
0.3810
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
1)
l2
l4
a
Inch
0.1100
0.1100
0.1100
0.1310
0.1520
0.1650
0.1910
0.2380
0.2860
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
#
Flutes Limits
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
H2
H2
H2
H2
H3
H3
H3
H3
H3
H5
H3
H3
H3
H3
H4
H4
H4
Inch
N43
N38
N36
N29
N25
N16
N7
F
5/16
5/16
U
27/64
31/64
17/32
21/32
49/64
7/8
2.35
2.65
2.85
3.50
3.90
4.50
5.10
6.60
8.00
8.00
9.40
10.80
12.20
13.50
16.50
19.50
22.25
0.6091
0.7404
0.5938
0.6526
0.8434
0.8848
1.0993
1.3094
1.4415
1.4415
EDP #
or
Stock # e-Code
0581643
0581650
0581667
0581674
0581681
0581698
0581704
0581711
0581728
0581735
0581742
0581759
0581766
0581773
0581780
0581797
0581803
E0284-40
E0285-40
E0286-32
E0288-32
E02810-24
E02812-24
E0281/4
E0285/16
E0283/8
E0283/8H5
E0287/16
E0281/2
E0289/16
E0285/8
E0283/4
E0287/8
E0281
1)
Class of fit: 2B
286
E037
Ɣ Spiral Flute
Ŷ
Ɣ
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1“
32
28
24
24
20
20
18
18
16
14
12
14
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
5.1/8
0.2650
0.3937
0.4567
0.5315
0.6299
0.6890
0.7087
0.7087
0.8858
0.9843
1.1811
1.1811
0.1940
0.2550
0.3180
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
0.8000
l4
a
Inch
0.1520
0.1910
0.2380
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
0.6000
#
Flutes Limits
3
3
3
3
3
3
3
3
3
3
3
3
H2
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
Inch
N21
N3
I
Q
25/64
29/64
33/64
37/64
11/16
13/16
59/64
59/64
4.10
5.50
6.90
8.50
9.90
11.50
12.90
14.50
17.50
20.40
23.25
23.50
0.8434
1.0993
1.3094
1.4415
EDP #
or
Stock # e-Code
0582312
0582329
0582336
0582343
0582350
0582367
0582374
0582381
0582398
0582404
0582411
0582428
E03710-32
E0371/4
E0375/16
E0373/8
E0377/16
E0371/2
E0379/16
E0375/8
E0373/4
E0377/8
E0371-12
E0371-14
287
E038
Ɣ Spiral Flute
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1“
32
28
24
24
20
20
18
18
16
14
12
14
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
5.1/8
0.2650
0.3937
0.4567
0.5315
0.6299
0.6890
0.7087
0.7087
0.8858
0.9843
1.1811
1.1811
0.1940
0.2550
0.3180
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
0.8000
288
l2
l4
a
Inch
0.1520
0.1910
0.2380
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
0.6000
#
Flutes Limits
3
3
3
3
3
3
3
3
3
3
3
3
H2
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
N21
N3
I
Q
25/64
29/64
33/64
37/64
11/16
13/16
59/64
59/64
4.10
5.50
6.90
8.50
9.90
11.50
12.90
14.50
17.50
20.40
23.25
23.50
Inch
Stock #
EDP #
or
e-Code
0.8434
1.0993
1.3094
1.4415
0582435
0582442
0582459
0582466
0582473
0582480
0582497
0582503
0582510
0582527
0582534
0582541
E03810-32
E0381/4
E0385/16
E0383/8
E0387/16
E0381/2
E0389/16
E0385/8
E0383/4
E0387/8
E0381-12
E0381-14
E069
Ɣ Spiral Flute for stainless steel
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
0.6091
0.7404
0.2610
0.2484
0.2650
0.2520
0.3937
0.4567
0.5315
0.6299
0.6890
0.7087
0.7087
0.8858
0.9843
1.1811
0.1410
0.1410
0.1410
0.1680
0.1940
0.2200
0.2550
0.3180
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
l2
l4
a
Inch
0.1100
0.1100
0.1100
0.1310
0.1520
0.1650
0.1910
0.2380
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
#
Flutes Limits
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
Inch
N43
N38
N36
N29
N25
N16
7
F
5/16
U
27/64
31/64
17/32
21/32
49/64
7/8
2.35
2.65
2.85
3.50
3.90
4.50
5.10
6.60
8.00
9.40
10.80
12.20
13.50
16.50
19.50
22.25
0.6091
0.7404
0.5938
0.6526
0.8434
0.8848
1.0993
1.3094
1.4415
EDP #
or
Stock # e-Code
0582718
0582725
0582732
0582749
0582756
0582763
0582770
0582787
0582794
0582800
0582817
0582824
0582831
0582848
0582855
0582862
E0694-40
E0695-40
E0696-32
E0698-32
E06910-24
E06912-24
E0691/4
E0695/16
E0693/8
E0697/16
E0691/2
E0699/16
E0695/8
E0693/4
E0697/8
E0691
289
E079
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1“
32
28
24
24
20
20
18
18
16
14
12
14
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.19/32
3.13/16
4.1/4
4.11/16
5.1/8
5.1/8
0.2650
0.3937
0.4567
0.5315
0.6299
0.6890
0.7087
0.7087
0.8858
0.9843
1.1811
1.1811
0.1940
0.2550
0.3180
0.3810
0.3230
0.3670
0.4290
0.4800
0.5900
0.6970
0.8000
0.8000
290
l2
l4
a
Inch
0.1520
0.1910
0.2380
0.2860
0.2420
0.2750
0.3220
0.3600
0.4420
0.5230
0.6000
0.6000
#
Flutes
Limits
3
3
3
3
3
3
3
4
4
4
4
4
H2
H3
H3
H3
H3
H3
H3
H3
H3
H4
H4
H4
N21
N3
I
Q
25/64
29/64
33/64
37/64
11/16
13/16
59/64
59/64
4.10
5.50
6.90
8.50
9.90
11.50
12.90
14.50
17.50
20.40
23.25
23.50
Inch
Stock #
EDP #
or
e-Code
0.8434
1.0993
1.3094
1.4415
0582916
0582923
0582930
0582947
0582954
0582961
0582978
0582985
0582992
0583005
0583012
0583029
E07910-32
E0791/4
E0795/16
E0793/8
E0797/16
E0791/2
E0799/16
E0795/8
E0793/4
E0797/8
E0791-12
E0791-14
E007 - E008
Ɣ Spiral Flute
E007
Ŷ
Ɣ
M
P
mm
l1
l2
Inch
Inch
d2
Ø
Inch /
4
5
6
8
10
12
14
16
18
20
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.50
2.1/8
2.3/8
2.1/2
2.23/32
2.15/16
3.3/8
3.19/32
3.13/16
4.1/32
4.15/32
0.2484
0.2650
0.3937
0.4567
0.5315
0.6890
0.7087
0.7087
0.8858
0.8858
0.1680
0.1940
0.2550
0.3180
0.3810
0.3670
0.4290
0.4800
0.5420
0.6520
l1
l2
l4
a
Inch
0.1310
0.1520
0.1910
0.2380
0.2860
0.2750
0.3220
0.3600
0.4060
0.4890
#
Flutes
3
3
3
3
3
3
3
3
3
3
Inch
3.3
4.2
5
6.8
8.5
10.3
12
14
15.5
17.5
0.6526
0.8434
1.0993
1.3094
1.4415
N30
N19
N9
H
Q
Y
15/32
35/64
39/64
11/16
Stock #
EDP #
or
e-Code
0580608
0580615
0580622
0580639
0580646
0580653
0580660
0580677
0580684
0580691
E007M4
E007M5
E007M6
E007M8
E007M10
E007M12
E007M14
E007M16
E007M18
E007M20
E008
Ŷ
Ɣ
M
P
mm
Inch
Inch
d2
Ø
Inch /
4
5
6
8
10
12
14
16
18
20
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.50
2.1/8
2.3/8
2.1/2
2.23/32
2.15/16
3.3/8
3.19/32
3.13/16
4.1/32
4.15/32
0.2484
0.2650
0.3937
0.4567
0.5315
0.6890
0.7087
0.7087
0.8858
0.8858
0.1680
0.1940
0.2550
0.3180
0.3810
0.3670
0.4290
0.4800
0.5420
0.6520
l4
a
Inch
0.1310
0.1520
0.1910
0.2380
0.2860
0.2750
0.3220
0.3600
0.4060
0.4890
#
Flutes
3
3
3
3
3
3
3
3
3
3
3.3
4.2
5
6.8
8.5
10.3
12
14
15.5
17.5
0.6526
0.8434
1.0993
1.3094
1.4415
N30
N19
N9
H
Q
Y
15/32
35/64
39/64
11/16
Stock #
EDP #
or
e-Code
0580707
0580714
0580721
0580738
0580745
0580752
0580769
0580776
0580783
0580790
E008M4
E008M5
E008M6
E008M8
E008M10
E008M12
E008M14
E008M16
E008M18
E008M20
291
E017 - E018
Ɣ Spiral Flute
E017
Ŷ
Ɣ
MF
P
mm
l1
l2
Inch
Inch
d2
Ø
Inch /
8
10
14
18
1.00
1.00
1.50
1.50
2.23/32
2.15/16
3.19/32
4.1/32
0.4567
0.5315
0.7087
0.8858
0.3180
0.3810
0.4290
0.5420
l4
a
Inch
0.2380
0.2860
0.3220
0.4060
#
Flutes
3
3
3
3
Inch
7.0
9.0
12.5
16.5
1.3094
1.4415
J
T
31/64
41/64
Stock #
EDP #
or
e-Code
0580998
0581001
0581018
0581025
E017M8X1.0
E017M10X1.0
E017M14X1.5
E017M18X1.5
E018
Ɣ Spiral Flute
Ŷ
Ɣ
MF
P
mm
l1
Inch
Inch
d2
Ø
Inch /
8
10
14
18
1.00
1.00
1.50
1.50
2.23/32
2.15/16
3.19/32
4.1/32
0.4567
0.5315
0.7087
0.8858
0.3180
0.3810
0.4290
0.5420
292
l2
l4
a
Inch
0.2380
0.2860
0.3220
0.4060
#
Flutes
3
3
3
3
7.0
9.0
12.5
16.5
1.3094
1.4415
J
T
31/64
41/64
Stock #
EDP #
or
e-Code
0581032
0581049
0581056
0581063
E018M8X1.0
E018M10X1.0
E018M14X1.5
E018M18X1.5
E085
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
4
5
6
8
10
12
14
16
20
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.1/8
2.3/8
2.1/2
2.23/32
2.15/16
3.3/8
3.19/32
3.13/16
4.15/32
0.2484
0.2650
0.3937
0.4567
0.5315
0.6890
0.7087
0.7087
0.8858
0.1680
0.1940
0.2550
0.3180
0.3810
0.3670
0.4290
0.4800
0.6520
l2
l4
a
Inch
0.1310
0.1520
0.1910
0.2380
0.2860
0.2750
0.3220
0.3600
0.4890
#
Flutes
3
3
3
3
3
3
3
4
4
Inch
3.3
4.2
5
6.8
8.5
10.3
12
14
17.5
0.6526
0.8434
1.0993
1.3094
1.4415
N30
N19
N9
H
Q
Y
15/32
35/64
11/16
Stock #
EDP #
or
e-Code
0583036
0583043
0583050
0583067
0583074
0583081
0583098
0583104
0583111
E085M4
E085M5
E085M6
E085M8
E085M10
E085M12
E085M14
E085M16
E085M20
293
E002
Ɣ Spiral Flute
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
3
3.5
4
5
6
8
10
12
14
16
18
20
22
24
0.50
0.60
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.50
2.50
3.00
48
50
53
58
66
72
80
89
95
102
112
112
118
130
6
16
7
8
10
12
15
16
18
18
29
29
29
35
3.15
3.55
4.00
5.00
6.30
8.00
10.00
9.00
11.20
12.50
14.00
14.00
16.00
18.00
294
l2
l3
a
mm
2.50
2.80
3.15
4.00
5.00
6.30
8.00
7.10
9.00
10.00
11.20
11.20
12.50
14.00
l4
mm
#
Flutes
5
5
6
7
8
9
11
10
12
13
14
14
16
18
3
3
3
3
3
3
3
3
3
4
4
4
4
4
2.5
2.9
3.3
4.2
5.0
6.8
8.5
10.3
12.0
14.0
15.5
17.5
19.5
21.0
mm
Stock #
EDP #
or
e-Code
12.5
14
19
22
27
31
35
0567869
0567876
0567883
0567890
0567906
0567913
0567920
0567937
0567944
0567951
0567968
0567975
0567982
0567999
E002M3
E002M3.5
E002M4
E002M5
E002M6
E002M8
E002M10
E002M12
E002M14
E002M16
E002M18
E002M20
E002M22
E002M24
E003
Ɣ Spiral Flute
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
3
3.5
4
5
6
8
10
12
14
16
18
20
22
24
0.50
0.60
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
2.50
2.50
3.00
48
50
53
58
66
72
80
89
95
102
112
112
118
130
6
16
7
8
10
12
15
16
18
18
29
29
29
35
3.15
3.55
4.00
5.00
6.30
8.00
10.00
9.00
11.20
12.50
14.00
14.00
16.00
18.00
l2
l3
a
mm
2.50
2.80
3.15
4.00
5.00
6.30
8.00
7.10
9.00
10.00
11.20
11.20
12.50
14.00
l4
mm
#
Flutes
5
5
6
7
8
9
11
10
12
13
14
14
16
18
3
3
3
3
3
3
3
3
3
4
4
4
4
4
mm
2.5
2.9
3.3
4.2
5.0
6.8
8.5
10.3
12.0
14.0
15.5
17.5
19.5
21.0
12.5
14
19
22
27
31
35
EDP #
or
Stock # e-Code
0568002
0568019
0568026
0568033
0568040
0568057
0568064
0568071
0568088
0568095
0568101
0568118
0568125
0568132
E003M3
E003M3.5
E003M4
E003M5
E003M6
E003M8
E003M10
E003M12
E003M14
E003M16
E003M18
E003M20
E003M22
E003M24
295
E012
Ɣ Spiral Flute
Ŷ
Ɣ
MF
P
mm
l1
mm
mm
d2
Ø
mm
4
5
6
6
8
8
10
10
12
12
12
14
16
16
18
20
22
0.50
0.50
0.50
0.75
0.75
1.00
1.00
1.25
1.00
1.25
1.50
1.50
1.00
1.50
1.50
1.50
1.50
53
58
66
66
72
72
80
80
89
89
89
95
102
102
112
112
118
7
8
10
10
12
12
15
15
16
16
16
18
18
18
29
29
29
4.0
5.0
6.3
6.3
8.0
8.0
10.0
10.0
9.0
9.0
9.0
11.2
12.5
12.5
14.0
14.0
16.0
296
l2
l3
a
mm
3.15
4.0
5.0
5.0
6.3
6.3
8.0
8.0
7.1
7.1
7.1
9.0
10.0
10.0
11.2
11.2
12.5
l4
mm
#
Flutes
6
7
8
8
9
9
11
11
10
10
10
12
13
13
14
14
16
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
3.5
4.5
5.5
5.3
7.3
7.0
9.0
8.8
11.0
10.8
10.5
12.5
15.0
14.5
16.5
18.5
20.5
mm
Stock #
EDP #
or
e-Code
19
22
27
27
31
31
35
35
0568620
0568637
0568644
0568651
0568668
0568675
0568682
0568699
0568705
0568712
0568729
0568736
0568743
0568750
0568767
0568774
0568781
E012M4X.5
E012M5X.5
E012M6X.5
E012M6X.75
E012M8X.75
E012M8X1.0
E012M10X1.0
E012M10X1.25
E012M12X1.0
E012M12X1.25
E012M12X1.5
E012M14X1.5
E012M16X1.0
E012M16X1.5
E012M18X1.5
E012M20X1.5
E012M22X1.5
E013
Ɣ Spiral Flute
Ŷ
Ɣ
MF
P
mm
l1
mm
mm
d2
Ø
mm
4
5
6
6
8
8
10
10
12
12
12
14
16
16
18
20
22
0.50
0.50
0.50
0.75
0.75
1.00
1.00
1.25
1.00
1.25
1.50
1.50
1.00
1.50
1.50
1.50
1.50
53
58
66
66
72
72
80
80
89
89
89
95
102
102
112
112
118
7
8
10
10
12
12
15
15
16
16
16
18
18
18
29
29
29
4.0
5.0
6.3
6.3
8.0
8.0
10.0
10.0
9.0
9.0
9.0
11.2
12.5
12.5
14.0
14.0
16.0
l2
l3
a
mm
3.15
4.0
5.0
5.0
6.3
6.3
8.0
8.0
7.1
7.1
7.1
9.0
10.0
10.0
11.2
11.2
12.5
l4
mm
#
Flutes
6
7
8
8
9
9
11
11
10
10
10
12
13
13
14
14
16
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
3.5
4.5
5.5
5.3
7.3
7.0
9.0
8.8
11.0
10.8
10.5
12.5
15.0
14.5
16.5
18.5
20.5
mm
Stock #
EDP #
or
e-Code
19
22
27
27
31
31
35
35
0568798
0568804
0568811
0568828
0568835
0568842
0568859
0568866
0568873
0568880
0568897
0568903
0568910
0568927
0568934
0568941
0568958
E013M4X.5
E013M5X.5
E013M6X.5
E013M6X.75
E013M8X.75
E013M8X1.0
E013M10X1.0
E013M10X1.25
E013M12X1.0
E013M12X1.25
E013M12X1.5
E013M14X1.5
E013M16X1.0
E013M16X1.5
E013M18X1.5
E013M20X1.5
E013M22X1.5
297
E050 - E051
Ɣ Spiral Flute for mild steel
E050
Ŷ
Ɣ
M
P
mm
l1
l2
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
16
20
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.50
48
53
58
66
72
80
89
102
112
6
7
8
10
12
15
16
18
29
3.15
4.00
5.00
6.30
8.00
10.00
9.00
12.50
14.00
l1
l2
l3
a
mm
2.50
3.15
4.00
5.00
6.30
8.00
7.10
10.00
11.20
l4
mm
#
Flutes
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
3
4
4
2.5
3.3
4.2
5.0
6.8
8.5
10.3
14.0
17.5
mm
Stock #
EDP #
or
e-Code
12.5
19
22
27
31
35
0606247
0606254
0606261
0606278
0606285
0606292
0606308
0606315
0606322
E050M3
E050M4
E050M5
E050M6
E050M8
E050M10
E050M12
E050M16
E050M20
E051
M
P
mm
mm
mm
d2
Ø
mm
6
8
10
12
16
20
1.00
1.25
1.50
1.75
2.00
2.50
66
72
80
89
102
112
10
12
15
16
18
29
6.30
8.00
10.0
9.00
12.50
14.00
298
l4
l3
a
mm
5.00
6.30
8.00
7.10
10.00
11.20
mm
#
Flutes
8
9
11
10
13
14
3
3
3
3
4
4
5
6.8
8.5
10.3
14
17.5
mm
Stock #
EDP #
or
e-Code
27
31
35
0606339
0606346
0606353
0606360
0606377
0606384
E051M6
E051M8
E051M10
E051M12
E051M16
E051M20
E048 - E044
Ɣ Spiral flute, for stainless steel
E048
Ŷ
Ɣ
M
P
mm
l1
l2
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
16
20
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.50
48
53
58
66
72
80
89
102
112
6
7
8
10
12
15
16
18
22
3.15
4.0
5.0
6.3
8.0
10.0
9.0
12.50
14
l3
a
mm
2.5
3.15
4.0
5.0
6.3
8.0
7.1
10.0
11.2
mm
#
Flutes
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
3
4
4
2.5
3.3
4.2
5
6.8
8.5
10.3
14
17.5
l4
EDP #
or
Stock # e-Code
15
19
22
27
31
35
0606063
0606070
0606087
0606094
0606100
0606117
0606124
0606131
0606148
E048M3
E048M4
E048M5
E048M6
E048M8
E048M10
E048M12
E048M16
E048M20
E044
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
8
10
12
16
20
1.25
1.50
1.75
2.00
2.50
72
80
89
102
112
17
20
22
24
29
8.00
10.00
9.00
12.50
14.00
l2
l4
l3
a
mm
6.30
8.00
7.10
10.00
11.20
mm
#
Flutes
8
9
10
13
14
3
3
3
4
4
mm
6.8
8.5
10.3
14
17.5
32
36
EDP #
or
Stock # e-Code
0605745
0605752
0605769
0605776
0605783
E044M8
E044M10
E044M12
E044M16
E044M20
299
E052 - E058
Ɣ Spiral flute, for aluminum
E052
Ŷ
Ɣ
M
P
mm
l1
l2
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
16
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
48
53
58
66
72
80
89
102
12.5
14
11
13
16
18
22
24
3.15
4.00
5.00
6.30
8.00
10.00
9.00
12.50
l4
l3
a
mm
2.50
3.15
4.00
5.00
6.30
8.00
7.10
10.00
Ɣ Spiral flute, for mild steel
mm
#
Flutes
5
6
7
8
9
11
10
13
3
3
3
3
3
3
3
4
2.5
3.3
4.2
5
6.8
8.5
10.3
14
mm
Stock #
EDP #
or
e-Code
12.5
14
22
26
29
34
0606391
0606407
0606414
0606421
0606438
0606445
0606452
0606469
E052M3
E052M4
E052M5
E052M6
E052M8
E052M10
E052M12
E052M16
E058
Ŷ
Ɣ
UNC
TPI
d1
nom
mm
6
8
10
1/4
5/16
3/8
1/2
5/8
3/4
32
32
24
20
18
16
13
11
10
3.505
4.166
4.826
6.350
7.938
9.525
12.700
15.875
19.050
300
l1
mm
mm
d2
Ø
mm
50
53
58
66
72
80
89
102
112
14
9.5
11
13
16
18
22
24
29
3.55
4.50
5.00
6.30
8.00
10.00
9.00
12.50
14.00
l2
l4
l3
a
mm
2.80
3.55
4.00
5.00
6.30
8.00
7.10
10.00
11.20
mm
#
Flutes
5
6
7
8
9
11
10
13
14
3
3
3
3
3
3
3
4
4
2.85
3.50
3.90
5.10
6.60
8.00
10.80
13.50
16.50
mm
Stock #
EDP #
or
e-Code
14
17
20
28
31
34
0606957
0606964
0606971
0606988
0606995
0607008
0607015
0607022
0607039
E0586-32
E0588-32
E05810-24
E0581/4
E0585/16
E0583/8
E0581/2
E0585/8
E0583/4
1582(UNC) (UNF)
Ɣ Machine Tap
Ɣ Spiral flute
Ɣ Tarauds machine
1582(UNC)
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
4
5
5
6
6
8
8
10
10
40
40
40
40
32
32
32
32
24
24
1.7/8
1.7/8
1.15/16
1.15/16
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
9/16
9/16
5/8
5/8
11/16
11/16
3/4
3/4
7/8
7/8
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.194
0.194
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
2
2
2
2
2
2
2
2
2
2
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
1010905
1010906
1010907
1010908
1010909
1010910
1010913
1010914
1010915
1010916
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.152
0.152
1582(UNF)
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
10
10
32
32
2.3/8
2.3/8
7/8
7/8
0.194
0.194
l2
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
1/4
1/4
2
2
H3
H3
P
B
1010917
1010918
l3
a
Inch
0.152
0.152
301
1586(UNC) (UNF)
Ɣ Machine Tap
Ɣ Spiral flute
Ɣ Tarauds machine
1586(UNC)
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
20
20
20
20
18
18
16
16
14
14
13
13
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
1“
1“
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
0.255
0.255
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
l3
a
Inch
0.191
0.191
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
2
2
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
P
B
1010346
1010347
1010348
1010349
1010354
1010355
1010358
1010359
1010362
1010363
1010366
1010367
1586(UNF)
Ɣ Machine Tap
Ɣ Spiral flute
Ɣ Tarauds machine
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
1/2
1/2
28
28
28
28
24
24
24
24
20
20
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
1“
1“
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.21/32
1.21/32
0.255
0.255
0.255
0.255
0.318
0.318
0.381
0.381
0.367
0.367
302
l2
l3
a
Inch
0.191
0.191
0.191
0.191
0.238
0.238
0.286
0.286
0.275
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
5/16
5/16
3/8
3/8
7/16
7/16
7/16
7/16
2
2
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
1010350
1010351
1010352
1010353
1010356
1010357
1010360
1010361
1010368
1010369
1587(UNC) (UNF)
Ɣ Machine Tap
Ɣ High-spiral helicut
Ɣ The higher helix angle gives
improved chip removal
Ɣ Tarauds machine
1587(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
3
3
4
4
5
5
6
6
8
8
10
10
12
12
48
48
40
40
40
40
32
32
32
32
24
24
24
24
1.13/16
1.13/16
1.7/8
1.7/8
1.15/16
1.15/16
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
1/2
1/2
9/16
9/16
5/8
5/8
11/16
11/16
3/4
3/4
7/8
7/8
15/16
15/16
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.194
0.194
0.220
0.220
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.152
0.152
0.165
0.165
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
9/32
9/32
2
2
2
2
2
2
2
2
3
3
3
3
3
3
H2
H2
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1010885
1010886
1010887
1010888
1010889
1010890
1010891
1010892
1010895
1010896
1010897
1010898
1010901
1010902
1587(UNF)
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
10
10
32
32
2.3/8
2.3/8
7/8
7/8
0.194
0.194
l2
l3
a
Inch
0.152
0.152
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
1/4
1/4
3
3
H3
H3
P
B
1010899
1010900
303
1588(UNC) (UNF)
Ɣ Machine Tap
Ɣ Tarauds machine
1588(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
20
20
18
18
16
16
14
14
13
13
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
1.000
1.000
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
l2
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
1010398
1010399
1010402
1010403
1010406
1010407
1010410
1010411
1010414
1010415
1588(UNF)
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
28
28
24
24
24
24
20
20
20
20
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
1.000
1.000
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
304
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
1010400
1010401
1010404
1010405
1010408
1010409
1010412
1010413
1010416
1010417
1788(M)
Ɣ Machine Tap
Ɣ Tarauds machine
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
M3
M3
M3.5
M3.5
M4
M4
M4.5
M4.5
M5
M5
M6
M6
M8
M8
M10
M10
M12
M12
0.50
0.50
0.60
0.60
0.70
0.70
0.75
0.75
0.80
0.80
1.00
1.00
1.25
1.25
1.50
1.50
1.75
1.75
1.15/16
1.15/16
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
5/8
5/8
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.21/32
1.21/32
0.141
0.141
0.141
0.141
0.168
0.168
0.194
0.194
0.194
0.194
0.255
0.255
0.318
0.318
0.381
0.381
0.367
0.367
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.131
0.131
0.152
0.152
0.152
0.152
0.191
0.191
0.238
0.238
0.286
0.286
0.275
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
7/16
7/16
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
D3
D3
D4
D4
D4
D4
D4
D4
D4
D4
D5
D5
D5
D5
D6
D6
D6
D6
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1012920
1012940
1012922
1012942
1012923
1012943
1012924
1012944
1012925
1012945
1012926
1012946
1012928
1012948
1012930
1012950
1012932
1012952
305
1590(UNC) (UNF)
Ɣ Machine Tap
Ɣ Spiral flute, heavy-duty
Ɣ Recommended for use in ferrous
materials and higher strength alloys
where regular or fast spiral designs
perform marginally
Ɣ A slower helix angle, large core diameter,
and wider throat dimensions than the
regular 1587/1588 series
Ɣ Tarauds machine
1590(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
6
6
8
8
10
10
12
12
32
32
32
32
24
24
24
24
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
11/16
11/16
3/4
3/4
7/8
7/8
15/16
15/16
0.141
0.141
0.168
0.168
0.194
0.194
0.220
0.220
l2
l3
a
Inch
0.110
0.110
0.131
0.131
0.152
0.152
0.165
0.165
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
1/4
1/4
1/4
1/4
9/32
9/32
2
2
2
2
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
1010937
1010938
1010941
1010942
1010945
1010946
1010949
1010950
1590(UNF)
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
6
6
8
8
10
10
12
12
40
40
36
36
32
32
28
28
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
11/16
11/16
3/4
3/4
7/8
7/8
15/16
15/16
0.141
0.141
0.168
0.168
0.194
0.194
0.220
0.220
306
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
1/4
1/4
1/4
1/4
9/32
9/32
2
2
2
2
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
1010939
1010940
1010943
1010944
1010947
1010948
1010951
1010952
l3
a
Inch
0.110
0.110
0.131
0.131
0.152
0.152
0.165
0.165
1591(UNC) - (UNF)
Ɣ Machine Tap
Ɣ Spiral flute, heavy-duty
Ɣ Recommended for use in ferrous
materials and higher strength alloys
where regular or fast spiral designs
perform marginally
Ɣ A slower helix angle, large core diameter,
and wider throat dimensions than the
regular 1587/1588 series
Ɣ Tarauds machine
1591(UNC)
Ŷ
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
20
20
18
18
16
16
14
14
13
13
2.1/2
2.1/2
2.23/32
2.23/32
2.5/16
2.5/16
3.5/32
3.5/32
3.3/8
3.3/8
1“
1“
1.1/8
1.1/8
1.1.4
1.1.4
1.7/16
1.7/16
1.21/32
1.21/32
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
l2
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
1010953
1010954
1010957
1010958
1010961
1010962
1010965
1010966
1010969
1010970
1591(UNF)
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
28
28
24
24
24
24
20
20
20
20
2.1/2
2.1/2
2.23/32
2.23/32
2.5/16
2.5/16
3.5/32
3.5/32
3.3/8
3.3/8
1“
1“
1.1/8
1.1/8
1.1.4
1.1.4
1.7/16
1.7/16
1.21/32
1.21/32
0.255
0.255
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
Inch
#
Flutes
Limits
Chamfer
EDP #
or
e-Code
5/16
5/16
3/8
3/8
7/16
7/16
13/32
13/32
7/16
7/16
3
3
3
3
3
3
3
3
3
3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
P
B
P
B
P
B
P
B
P
B
1010955
1010956
1010959
1010960
1010963
1010964
1010967
1010968
1010971
1010972
l3
a
Inch
0.191
0.191
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
307
E029
Ɣ Thread Forming Taps MTT-X
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
2
4
6
8
10
12
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1“
56
40
32
32
24
24
20
18
16
14
13
11
10
9
8
1.3/4
1.7/8
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
3.13/16
4-1/4
4.11/16
5-1/8
0.3140
0.6091
0.2610
0.2484
0.4303
0.4173
0.5075
0.5939
0.6020
0.9055
0.9055
0.9843
1.1614
1.1614
1.3976
0.1410
0.1410
0.1410
0.1680
0.1940
0.2200
0.2550
0.3180
0.3810
0.3230
0.3670
0.4800
0.5900
0.6970
0.8000
308
l2
l4
a
Inch
0.1100
0.1100
0.1100
0.1310
0.1520
0.1650
0.1910
0.2380
0.2860
0.2420
0.2750
0.3600
0.4420
0.5230
0.6000
#
Flutes
3
3
3
3
4
4
4
5
6
6
6
8
8
8
8
N47
N39
1/8
N25
11/64
N9
11/32
Y
15/32
37/64
45/64
53/64
61/64
2.0
2.6
3.2
3.8
4.4
5.0
5.8
7.3
8.8
10.3
11.9
14.8
17.9
21.0
24.0
Inch
Stock #
EDP #
or
e-Code
0.3140
0.6091
0.5938
0.6526
0.8434
0.8848
1.0073
1.1891
1.2915
0583210
0581810
0581827
0581834
0581841
0581858
0581865
0581872
0581889
0581896
0581902
0581919
0581926
0581933
0581940
E0292-56
E0294-40
E0296-32
E0298-32
E02910-24
E02912-24
E0291/4
E0295/16
E0293/8
E0297/16
E0291/2
E0295/8
E0293/4
E0297/8
E0291
E064 - E039
E064
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
6
8
10
12
1/4
5/16
3/8
40
32
32
24
24
20
18
16
1.7/8
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.23/32
2.15/16
0.6091
0.2610
0.2484
0.4303
0.4173
0.5075
0.5939
0.6020
0.1410
0.1410
0.1680
0.1940
0.2200
0.2550
0.3180
0.3810
Inch
Stock #
EDP #
or
e-Code
0.6091
0.5938
0.6526
0.8434
0.8848
1.0073
1.1891
1.2915
0582633
0582640
0582657
0582664
0582671
0582688
0582695
0582701
E0644-40
E0646-32
E0648-32
E06410-24
E06412-24
E0641/4
E0645/16
E0643/8
l4
a
Inch
0.1100
0.1100
0.1310
0.1520
0.1650
0.1910
0.2380
0.2860
#
Flutes
3
3
3
4
4
4
5
6
N39
1/8
N25
11/64
N9
11/32
2.6
3.2
3.8
4.4
5.0
5.8
7.3
8.8
E039
Ŷ
Ɣ
l1
l2
l4
UNF
TPI
Inch
Inch
d2
Ø
Inch /
0
10
1/4
5/16
3/8
7/16
1/2
80
32
28
24
24
20
20
1.5/8
2.3/8
2.1/2
2.23/32
2.15/16
3.5/32
3.3/8
0.3125
0.4303
0.5075
0.5939
0.6020
0.9055
0.9055
0.1410
0.2200
0.2550
0.3180
0.3810
0.3230
0.3670
a
Inch
0.1100
0.1650
0.1910
0.2380
0.2860
0.2420
0.2750
5/8
3/4
18
16
3.13/16
4.1/4
0.9843
1.1614
0.4800
0.5900
0.3600
0.4420
#
Flutes
3
4
4
5
6
6
6
N54
N16
A
M
T
Z
0.4760
1.4
4.5
6.0
7.5
9.1
10.6
12.1
8
8
39/64
23/32
15.3
18.3
Inch
Stock #
EDP #
or
e-Code
0.3125
0.8434
1.0073
1.1891
1.2915
0583234
0582558
0582565
0582572
0582589
0582596
0582602
E0390-80
E03910-32
E0391/4
E0395/16
E0393/8
E0397/16
E0391/2
0582619
0582626
E0395/8
E0393/4
309
E074 - E009
E074
Ɣ
l1
l2
UNF
TPI
Inch
Inch
d2
Ø
Inch /
l4
10
1/4
5/16
3/8
32
28
24
24
2.3/8
2.1/2
2.23/32
2.15/16
0.4303
0.5075
0.5939
0.6020
0.2200
0.2550
0.3180
0.3810
a
Inch
0.1650
0.1910
0.2380
0.2860
#
Flutes
4
4
5
6
N16
A
M
T
4.5
6.0
7.5
9.1
Inch
Stock #
EDP #
or
e-Code
0.8434
1.0073
1.1891
1.2915
0582879
0582886
0582893
0582909
E07410-32
E0741/4
E0745/16
E0743/8
E009
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
3
4
5
6
8
10
12
14
16
20
24
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.50
3.00
2“
2.1/8
2.3/8
2.1/2
2.23/32
2.15/16
3.3/8
3.19/32
3.13/16
4.15/32
5.1/8
0.7404
0.2484
0.4303
0.5075
0.5939
0.6020
0.9055
0.9843
0.9843
1.1614
1.3976
0.1410
0.1680
0.1940
0.2550
0.3180
0.3810
0.3670
0.4290
0.4800
0.4890
0.8000
310
l2
l4
a
Inch
0.1100
0.1310
0.1520
0.1910
0.2380
0.2860
0.2750
0.3220
0.3600
0.4890
0.6000
#
Flutes
3
4
4
4
5
6
6
8
8
8
8
EDP #
or
Stock # e-Code
Inch
2.8
3.7
4.6
5.5
7.4
9.3
11.2
13.0
15.0
18.8
22.5
0.7404
0.6526
0.8434
1.0073
1.1891
1.2915
N35
N14
7/32
7/16
0580806
0580813
0580820
0580837
0580844
0580851
0580868
0580875
0580882
0580899
0580905
E009M3
E009M4
E009M5
E009M6
E009M8
E009M10
E009M12
E009M14
E009M16
E009M20
E009M24
E094 - E097
E094
Ɣ
l1
l2
l4
M
P
mm
Inch
Inch
d2
Ø
Inch /
3
4
5
6
8
10
0.50
0.70
0.80
1.00
1.25
1.50
2“
2.1/8
2.3/8
2.1/2
2.23/32
2.15/16
0.7404
0.2484
0.4303
0.5075
0.5939
0.6020
0.1410
0.1680
0.1940
0.2550
0.3180
0.3810
a
Inch
0.1100
0.1310
0.1520
0.1910
0.2380
0.2860
#
Flutes
3
4
4
4
5
6
Inch
2.8
3.7
4.6
5.5
7.4
9.3
0.7404
0.6526
0.8434
1.0073
1.1891
1.2915
N35
N14
7/32
Stock #
EDP #
or
e-Code
0583128
0583135
0583142
0583159
0583166
0583173
E094M3
E094M4
E094M5
E094M6
E094M8
E094M10
E097
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
2
2.5
3
4
5
6
8
10
12
16
0.40
0.45
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
41
44.5
48
53
58
66
72.0
80.0
89.0
102.0
8
9.5
12.5
14
11
13
16
18
22
24
2.50
2.80
3.15
4.00
5.00
6.30
8.00
10.00
9.00
12.50
1)
l2
l4
l3
a
mm
2.00
2.24
2.50
3.15
4.00
5.00
6.30
8.00
7.10
10.00
mm
4
5
5
6
7
8
9
11
10
13
1.8
2.3
2.8
3.7
4.6
5.5
7.4
9.3
11.2
15
mm
Stock #
EDP #
or
e-Code
8
9.5
12.5
14
22
26
29
34
0599884
0599891
0599907
0599914
0599921
0599938
0599945
0599952
0599969
0599976
E097M2
E097M2.5
E097M3
E097M4
E097M5
E097M6
E097M8
E097M10
E097M12
E097M16
1)
1)
Steel HSCo
311
E098 - E099
Ɣ Short chamfer
E098
Ŷ
Ɣ
M
P
mm
l1
l2
mm
mm
d2
Ø
mm
3
4
5
6
8
10
0.50
0.70
0.80
1.00
1.25
1.50
48
53
58
66
72
80
12.5
14
11
13
16
18
3.15
4.00
5.00
6.30
8.00
10.00
a
mm
2.50
3.15
4.00
5.00
6.30
8.00
l3
l4
mm
mm
EDP #
or
Stock # e-Code
12.5
14
22
26
29
34
0599983
0599990
0600009
0600016
0600023
0600030
5
6
7
8
9
11
2.8
3.7
4.6
5.5
7.4
9.3
E098M3
E098M4
E098M5
E098M6
E098M8
E098M10
E099
Ɣ Oil grooves, internal coolant, radial outlet
Ŷ
Ɣ
M
P
mm
l1
mm
mm
d2
Ø
mm
4
5
6
8
10
12
16
0.70
0.80
1.00
1.25
1.50
1.75
2.00
53
58
66
72
80
89
102
14
11
13
16
18
22
24
4.00
5.00
6.30
8.00
10.00
9.00
12.50
312
l2
l4
l3
a
mm
3.15
4.00
5.00
6.30
8.00
7.10
10.00
mm
6
7
8
9
11
10
13
3.7
4.6
5.5
7.4
9.3
11.2
15
mm
Stock #
EDP #
or
e-Code
14
22
26
29
34
0600047
0600054
0600061
0600078
0600085
0600092
0600108
E099M4
E099M5
E099M6
E099M8
E099M10
E099M12
E099M16
E080
Ŷ
M
P
mm
l1
mm
mm
d2
Ø
mm
2
2.5
3
4
5
6
8
0.40
0.45
0.50
0.70
0.80
1.00
1.25
41.0
44.5
48.0
53.0
58.0
66.0
72.0
8
9.5
12.5
14
11
13
16
2.50
2.80
3.15
4.00
5.00
6.30
8.00
1)
l2
l3
a
mm
2.00
2.24
2.50
3.15
4.00
5.00
6.30
l4
mm
4
5
5
6
7
8
9
1.8
2.3
2.8
3.7
4.6
5.5
7.4
mm
Stock #
EDP #
or
e-Code
8
9.5
12.5
14
22
26
29
0599518
0599525
0599532
0599549
0599556
0599563
0599570
E080M2
E080M2.5
E080M3
E080M4
E080M5
E080M6
E080M8
1)
1)
Steel HSCo
313
1580(UNC)
Ɣ Thread Forming Taps
Ɣ Rol-Rite
Ɣ The Rol-Rite spiral forming lobe
pattern reduces tapping torque
but has no lube grooves
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1
2
2
3
3
4
4
4
4
5
5
5
5
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
64
56
56
48
48
40
40
40
40
40
40
40
40
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
20
20
20
20
18
18
18
16
16
14
14
13
13
1.11/16
1.3/4
1.3/4
1.13/16
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
15/16
15/16
15/16
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.220
0.220
0.220
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
314
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.165
0.165
0.165
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
Inch
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
5/16
5/16
5/16
5/16
7/16
7/16
7/16
1/2
1/2
9/16
9/16
23/32
23/32
H2
H2
H3
H2
H3
H3
H3
H5
H5
H3
H3
H5
H5
H3
H3
H5
H5
H3
H3
H5
H5
H4
H4
H6
H6
H4
H4
H6
H4
H4
H6
H6
H5
H5
H7
H5
H5
H5
H5
H5
H5
B
B
B
B
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
B
P
B
P
B
P
B
B
P
B
P
B
P
B
1310002
1310004
1310005
1310008
1310009
1310012
1310014
1310013
1310015
1310020
1310022
1310021
1310023
1310028
1310031
1310029
1310032
1310038
1310041
1310039
1310042
1310048
1310051
1310049
1310052
1310060
1310062
1310063
1310068
1310071
1310069
1310072
1310078
1310080
1310081
1310086
1310088
1310094
1310096
1310102
1310104
1580(UNF)
Ɣ Rol-Rite
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
0
1
2
2
3
3
4
4
5
5
6
6
6
6
8
8
10
10
10
10
12
12
12
1/4
1/4
5/16
5/16
5/16
3/8
3/8
7/16
7/16
1/2
1/2
80
72
64
64
56
56
48
48
44
44
40
40
40
40
36
36
32
32
32
32
28
28
28
28
28
24
24
24
24
24
20
20
20
20
1.5/8
1.11/16
1.3/4
1.3/4
1.13/16
1.13/16
1.7/8
1.7/8
1.15/16
1.15/16
2“
2“
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
5/16
3/8
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
15/16
15/16
15/16
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.194
0.194
0.194
0.194
0.220
0.220
0.220
0.255
0.255
0.318
0.318
0.318
0.381
0.381
0.323
0.323
0.367
0.367
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.152
0.152
0.152
0.152
0.165
0.165
0.165
0.191
0.191
0.238
0.238
0.238
0.286
0.286
0.242
0.242
0.275
0.275
Inch
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
5/16
5/16
7/16
7/16
7/16
1/2
1/2
9/16
9/16
23/32
23/32
H2
H2
H2
H3
H2
H3
H3
H3
H3
H3
H3
H3
H5
H5
H3
H3
H4
H4
H6
H6
H4
H4
H6
H4
H4
H5
H5
H7
H5
H5
H5
H5
H5
H5
B
B
B
B
B
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
B
P
B
P
B
B
P
B
P
B
P
B
1310001
1310003
1310006
1310007
1310010
1310011
1310016
1310018
1310024
1310026
1310034
1310036
1310035
1310037
1310044
1310046
1310054
1310057
1310055
1310058
1310064
1310066
1310067
1310074
1310076
1310082
1310084
1310085
1310090
1310092
1310098
1310100
1310106
1310108
315
1580(M)
Ɣ Rol-Rite
Ɣ Tarauds machine
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
M3
M3
M4
M4
M5
M5
M6
M6
M8
M8
M10
M10
M12
M12
0.50
0.50
0.70
0.70
0.80
0.80
1.00
1.00
1.25
1.25
1.50
1.50
1.75
1.75
1.15/16
1.15/16
2.1/8
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.21/32
1.21/32
0.141
0.141
0.168
0.168
0.194
0.194
0.255
0.255
0.318
0.318
0.381
0.381
0.367
0.367
316
l2
l3
a
Inch
0.110
0.110
0.131
0.131
0.152
0.152
0.191
0.191
0.238
0.238
0.286
0.286
0.275
0.275
Inch
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
7/16
7/16
D5
D5
D6
D6
D7
D7
D8
D8
D9
D9
D10
D10
D11
D11
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1310400
1310401
1310402
1310403
1310404
1310405
1310406
1310407
1310408
1310409
1310410
1310411
1310412
1310413
3300(UNC)
Ɣ Rol-Form
Ɣ The Rol-Form taps have lube
grooves for improved coolant
flow in sizes #6 and larger
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
1
2
2
3
4
4
4
4
5
5
5
5
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
1/2
1/2
64
56
56
48
40
40
40
40
40
40
40
40
32
32
32
32
32
32
32
32
24
24
24
24
24
24
24
20
20
20
20
18
18
18
18
16
16
16
16
14
14
13
13
1.11/16
1.3/4
1.3/4
1.13/16
1.7/8
1.7/8
1.7/8
1.7/8
1.15/16
1.15/16
1.15/16
1.15/16
2“
2“
2“
2“
2.1/8
2.1/8
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
3/8
7/16
7/16
1/2
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
15/16
15/16
15/16
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.220
0.220
0.220
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.323
0.323
0.367
0.367
l2
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.165
0.165
0.165
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.242
0.242
0.275
0.275
Inch
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
5/16
5/16
5/16
5/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
9/16
9/16
23/32
23/32
H2
H2
H3
H3
H3
H3
H5
H5
H3
H3
H5
H5
H3
H3
H5
H5
H3
H3
H5
H5
H4
H4
H6
H6
H4
H4
H6
H4
H4
H6
H6
H5
H5
H7
H7
H5
H5
H7
H7
H5
H5
H5
H5
B
B
B
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1310111
1310113
1310114
1310118
1310121
1310123
1310122
1310124
1310129
1310131
1310130
1310132
1310137
1310140
1310138
1310141
1310147
1310150
1310148
1310151
1310157
1310160
1310158
1310161
1310169
1310171
1310172
1310177
1310180
1310178
1310181
1310187
1310189
1310188
1310190
1310195
1310197
1310196
1310198
1310203
1310205
1310211
1310213
317
3300(UNF)
Ɣ Rol-Form
grooves for improved coolant
flow in sizes #6 and larger
Ɣ Tarauds machine
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
0
1
2
2
3
4
4
5
5
6
6
6
8
8
10
10
10
10
12
12
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
1/2
1/2
80
72
64
64
56
48
48
44
44
40
40
40
36
36
32
32
32
32
28
28
28
28
24
24
24
24
24
24
24
24
20
20
20
20
1.5/8
1.11/16
1.3/4
1.3/4
1.13/16
1.7/8
1.7/8
1.15/16
1.15/16
2“
2“
2“
2.1/8
2.1/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.23/32
2.23/32
2.15/16
2.15/16
2.15/16
2.15/16
3.5/32
3.5/32
3.3/8
3.3/8
5/16
3/8
7/16
7/16
1/2
9/16
9/16
5/8
5/8
11/16
11/16
11/16
3/4
3/4
7/8
7/8
7/8
7/8
15/16
15/16
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.7/16
1.7/16
1.21/32
1.21/32
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.194
0.194
0.194
0.194
0.220
0.220
0.255
0.255
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.323
0.323
0.367
0.367
318
l2
Inch
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
5/16
5/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
9/16
9/16
23/32
23/32
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H5
H3
H3
H4
H4
H6
H6
H4
H4
H4
H4
H5
H5
H7
H7
H5
H5
H7
H7
H5
H5
H5
H5
B
B
B
B
B
P
B
P
B
P
B
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1310110
1310112
1310115
1310116
1310120
1310125
1310127
1310133
1310135
1310143
1310145
1310146
1310153
1310155
1310163
1310166
1310164
1310167
1310173
1310175
1310183
1310185
1310191
1310193
1310192
1310194
1310199
1310201
1310200
1310202
1310207
1310209
1310215
1310217
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.152
0.152
0.152
0.152
0.165
0.165
0.191
0.191
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.242
0.242
0.275
0.275
3300(M)
Ɣ Rol-Form
grooves for improved coolant flow
in sizes M4 and larger
Ɣ Tarauds machine
Ŷ
Ɣ
M
P
mm
l1
Inch
Inch
d2
Ø
Inch /
M3
M3
M4
M4
M5
M5
M6
M6
M8
M8
M10
M10
M12
M12
0.50
0.50
0.70
0.70
0.80
0.80
1.00
1.00
1.25
1.25
1.50
1.50
1.75
1.75
1.15/16
1.15/16
2.1/8
2.1/8
2.3/8
2.3/8
2.1/2
2.1/2
2.23/32
2.23/32
2.15/16
2.15/16
3.3/8
3.3/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.21/32
1.21/32
0.141
0.141
0.168
0.168
0.194
0.194
0.255
0.255
0.318
0.318
0.381
0.381
0.367
0.367
l2
l3
a
Inch
0.110
0.110
0.131
0.131
0.152
0.152
0.191
0.191
0.238
0.238
0.286
0.286
0.275
0.275
Inch
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
7/16
7/16
7/16
7/16
D5
D5
D6
D6
D7
D7
D8
D8
D9
D9
D10
D10
D11
D11
P
B
P
B
P
B
P
B
P
B
P
B
P
B
1310500
1310501
1310502
1310503
1310504
1310505
1310506
1310507
1310508
1310509
1310510
1310511
1310512
1310513
319
3306E(UNC)
Ɣ Extension Rol-Form
Ɣ Tarauds machine
l3
Ŷ
Ɣ
l1
UNC
TPI
Inch
Inch
d2
Ø
Inch /
4
4
6
6
6
6
8
8
8
8
10
10
10
10
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
40
40
32
32
32
32
32
32
32
32
24
24
24
24
20
20
20
20
20
20
18
18
18
18
18
18
16
16
16
16
16
16
4“
4“
4“
4“
6“
6“
4“
4“
6“
6“
4“
4“
6“
6“
4“
4“
4“
6“
6“
6“
4“
4“
4“
6“
6“
6“
4“
4“
4“
6“
6“
6“
9/16
9/16
11/16
11/16
11/16
11/16
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
0.141
0.141
0.141
0.141
0.141
0.141
0.168
0.168
0.168
0.168
0.194
0.194
0.194
0.194
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
0.381
0.381
0.381
0.381
0.381
0.381
320
l2
Inch
Limits
Chamfer
EDP #
or
e-Code
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
H3
H5
H3
H5
H3
H5
H3
H5
H3
H5
H4
H6
H4
H6
H4
H6
H8
H4
H6
H8
H5
H7
H9
H5
H7
H9
H5
H7
H9
H5
H7
H9
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
1321002
1321004
1321006
1321008
1321010
1321012
1321014
1321016
1321018
1321020
1321022
1321024
1321026
1321028
1321038
1321040
1321042
1321044
1321046
1321048
1321062
1321064
1321066
1321068
1321070
1321072
1321086
1321088
1321090
1321092
1321094
1321096
l3
a
Inch
0.110
0.110
0.110
0.110
0.110
0.110
0.131
0.131
0.131
0.131
0.152
0.152
0.152
0.152
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
0.286
0.286
0.286
0.286
0.286
0.286
3306E(UNF)
Ɣ Extension Rol-Form
Ɣ Tarauds machine
l3
Ŷ
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch /
10
10
10
10
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
32
32
32
32
28
28
28
28
28
28
24
24
24
24
24
24
4“
4“
6“
6“
4“
4“
4“
6“
6“
6“
4“
4“
4“
6“
6“
6“
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
0.194
0.194
0.194
0.194
0.255
0.255
0.255
0.255
0.255
0.255
0.318
0.318
0.318
0.318
0.318
0.318
l2
l3
a
Inch
0.152
0.152
0.152
0.152
0.191
0.191
0.191
0.191
0.191
0.191
0.238
0.238
0.238
0.238
0.238
0.238
Inch
Limits
Chamfer
EDP #
or
e-Code
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
H4
H6
H6
H4
H4
H6
H8
H4
H6
H8
H5
H7
H9
H5
H7
H9
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
1321030
1321032
1321036
1321034
1321050
1321052
1321054
1321056
1321058
1321060
1321074
1321076
1321078
1321080
1321082
1321084
321
E710
Ɣ Tarauds machine
Ɣ Pipe Tap
E710
Ɣ
NPT
TPI
d1
nom
mm
1/16
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
1.1/2
2“
27
27
18
18
14
14
11.5
11.5
11.5
11.5
7.94
10.29
13.72
17.15
21.34
26.67
33.40
42.16
48.26
60.33
322
l1
l2
mm
mm
d2
Ø
mm
65
70
75
80
100
105
115
125
135
145
17
19
27
27
35
35
43
43
43
43
8.1
11.1
14.3
17.8
17.5
23.0
28.6
33.3
38.1
47.6
z
Stock
No.
EDP #
or
e-Code
4
4
4
4
4
5
5
5
7
7
0159491
0099889
0099872
0099919
0099865
0099902
0099834
0099858
0099841
0099896
E7101/16NO3
E7101/8
E7101/4
E7103/8
E7101/2
E7103/4
E7101
E7101.1/4
E7101.1/2
E7102
l3
a
mm
6.0
8.3
10.7
13.5
13.1
17.2
21.4
25.0
28.6
35.7
mm
8
10
11
13
16
17
21
24
25
29
6.3
8.5
11
14.5
18
23
29
38
44
56
1541(NPT) - TN1541
Ɣ Pipe Tap
Ɣ Straight flute, medium hook
Ɣ Tarauds machine
1541(NPT)
Ŷ
Ɣ
l1
l2
NPT
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
1.1/2
2“
27
27
27
18
18
14
14
11.5
11.5
11.5
11.5
2.1/8
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
4“
4.1/4
4.1/2
11/16
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
1.3/4
1.3/4
1.3/4
0.313
0.313
0.438
0.563
0.700
0.688
0.906
1.125
1.313
1.500
1.875
l3
a
Inch
0.234
0.234
0.328
0.421
0.531
0.515
0.679
0.843
0.984
1.125
1.406
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
3/8
7/16
1/2
5/8
11/16
13/16
15/16
1“
1.1/8
4
4
4
4
4
4
5
5
5
7
7
1010518
1010528
1010519
1010520
1010521
1010522
1010523
1010524
1010525
1010526
1010527
TN1541
Ɣ Tarauds machine
Ɣ Pipe Tap, Straight Flute, Medium Hook
Ŷ
Ɣ
l1
NPT
TPI
mm
mm
d2
Ø
Inch /
1/8
1/4
3/8
1/2
3/4
27
18
18
14
14
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
0.438
0.563
0.700
0.688
0.906
l2
l3
a
Inch
0.328
0.421
0.531
0.515
0.679
Inch
#
Flutes
EDP #
or
e-Code
3/8
7/16
1/2
5/8
11/16
4
4
4
4
5
1060519
1060520
1060521
1060522
1060523
323
1543(NPTF) - TN1543
Ɣ Pipe Tap
Ɣ Tarauds machine
1543(NPTF)
Ŷ
Ɣ
l1
l2
NPTF
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
1.1/2
27
27
27
18
18
14
14
11.5
11.5
11.5
2.1/8
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
4“
4.1/4
11/16
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
1.3/4
1.3/4
0.313
0.313
0.438
0.563
0.700
0.688
0.906
1.125
1.313
1.500
l3
a
Inch
0.234
0.234
0.328
0.421
0.531
0.515
0.679
0.843
0.984
1.125
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
3/8
7/16
1/2
5/8
11/16
13/16
15/16
1“
4
4
4
4
4
4
5
5
5
7
1010529
1010539
1010530
1010531
1010532
1010533
1010534
1010535
1010536
1010537
TN1543
Ɣ Pipe Tap
Ɣ Tarauds machine
Ŷ
Ɣ
l1
NPTF
TPI
mm
mm
d2
Ø
Inch /
1/8
1/4
3/8
1/2
3/4
27
18
18
14
14
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
0.438
0.563
0.700
0.688
0.906
324
l2
l3
a
Inch
0.328
0.421
0.531
0.515
0.679
Inch
#
Flutes
EDP #
or
e-Code
3/8
7/16
1/2
5/8
11/16
4
4
4
4
5
1060530
1060531
1060532
1060533
1060534
1544(NPT) - 1545(NPT)
Ɣ Pipe Tap
Ɣ Straight flute, For cast iron and heat-treated
alloy steels
Ɣ Tarauds machine
1544(NPT)
Ŷ
Ɣ
l1
l2
NPT
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
1.1/2
2“
27
27
27
18
18
14
14
11.5
11.5
11.5
11.5
2.1/8
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
4“
4.1/4
4.1/2
11/16
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
1.3/4
1.3/4
1.3/4
0.313
0.313
0.438
0.563
0.700
0.688
0.906
1.125
1.313
1.500
1.875
l3
a
Inch
0.234
0.234
0.328
0.421
0.531
0.515
0.679
0.843
0.984
1.125
1.406
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
3/8
7/16
1/2
5/8
11/16
13/16
15/16
1“
1.1/8
4
4
4
4
4
4
5
5
5
7
7
1011760
1011770
1011761
1011762
1011763
1011764
1011765
1011766
1011767
1011768
1011769
1545(NPT)
Ɣ Pipe Tap
Ɣ High hook
Ɣ Tarauds machine
Ŷ
Ɣ
l1
NPT
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
1.1/2
2“
27
27
27
18
18
14
14
11.5
11.5
11.5
11.5
2.1/8
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
4“
4.1/4
4.1/2
11/16
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
1.3/4
1.3/4
1.3/4
0.313
0.313
0.438
0.563
0.700
0.688
0.906
1.125
1.313
1.500
1.875
l2
l3
a
Inch
0.234
0.234
0.328
0.421
0.531
0.515
0.679
0.843
0.984
1.125
1.406
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
3/8
7/16
1/2
5/8
11/16
13/16
15/16
1“
1.1/8
4
4
4
4
4
4
5
5
5
7
7
1012869
1012879
1012870
1012871
1012872
1012873
1012874
1012875
1012876
1012877
1012878
325
1545A(NPT) - 1546(NPTF)
Ɣ Pipe Tap
Ɣ High hook
Ɣ Tarauds machine
1545A(NPT)
Ŷ
Ɣ
l1
l2
NPT
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/4
3/8
1/2
3/4
27
27
18
18
14
14
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
11/16
3/4
1.1/16
1.1/16
1.3/8
1.3/8
0.313
0.438
0.563
0.700
0.688
0.906
l3
a
Inch
0.234
0.328
0.421
0.531
0.515
0.679
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
7/16
1/2
5/8
11/16
4
4
4
4
4
5
1052869
1052870
1052871
1052872
1052873
1052874
1546(NPTF)
Ɣ Pipe Tap
Ɣ High hook
Ɣ Tarauds machine
Ŷ
Ɣ
l1
NPTF
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/8
1/4
3/8
1/2
3/4
1“
27
27
27
18
18
14
14
11.5
2.1/8
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
11/16
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
0.313
0.313
0.438
0.563
0.700
0.688
0.906
1.125
326
l2
l3
a
Inch
0.234
0.234
0.328
0.421
0.531
0.515
0.679
0.843
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
3/8
7/16
1/2
5/8
11/16
13/16
4
4
4
4
4
4
5
5
1012880
1012889
1012881
1012882
1012883
1012884
1012885
1012886
1567(NPTF) - 1568(NPT)
Ɣ Pipe Tap
Ɣ Interrupted thread
Ɣ Tarauds machine
1567(NPTF)
Ŷ
Ɣ
l1
l2
NPTF
TPI
Inch
Inch
d2
Ø
Inch /
1/8
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
27
27
18
18
14
14
11.5
11.5
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
4“
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
1.3/4
0.313
0.438
0.563
0.700
0.688
0.906
1.125
1.313
l3
a
Inch
0.234
0.328
0.421
0.531
0.515
0.679
0.843
0.984
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
7/16
1/2
5/8
11/16
13/16
15/16
5
5
5
5
5
5
5
5
1010570
1010561
1010562
1010563
1010564
1010565
1010566
1010567
1568(NPT)
Ɣ Pipe Tap
Ɣ Interrupted thread
Ɣ Tarauds machine
Ŷ
Ɣ
l1
NPT
TPI
Inch
Inch
d2
Ø
Inch /
1/8
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
1.1/2
2“
27
27
18
18
14
14
11.5
11.5
11.5
11.5
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
4“
4.1/4
4.1/2
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
1.3/4
1.3/4
1.3/4
0.313
0.438
0.563
0.700
0.688
0.906
1.125
1.313
1.500
1.875
l2
l3
a
Inch
0.234
0.328
0.421
0.531
0.515
0.679
0.843
0.984
1.125
1.406
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
7/16
1/2
5/8
11/16
13/16
15/16
1“
1.1/8
5
5
5
5
5
5
5
5
7
7
1010560
1010551
1010552
1010553
1010554
1010555
1010556
1010557
1010558
1010559
327
1548(NPT) - 1549(NPTF)
Ɣ Pipe Tap
Ɣ Medium hook
Ɣ Tarauds machine
1548(NPT)
Ŷ
Ɣ
l1
l2
NPT
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/8
1/4
3/8
1/2
3/4
1“
27
27
27
18
18
14
14
11.5
2.1/8
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
11/16
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
0.313
0.313
0.438
0.563
0.700
0.688
0.906
1.125
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
3/8
7/16
1/2
5/8
11/16
13/16
4
4
4
4
4
4
5
5
1010920
1010924
1010922
1010926
1010928
1010930
1010932
1010934
l3
a
Inch
0.234
0.234
0.328
0.421
0.531
0.515
0.679
0.843
1549(NPTF)
Ɣ Pipe Tap
Ɣ Medium hook
Ɣ Tarauds machine
Ŷ
Ɣ
l1
NPTF
TPI
Inch
Inch
d2
Ø
Inch /
1/16
1/8
1/8
1/4
3/8
1/2
3/4
1“
27
27
27
18
18
14
14
11.5
2.1/8
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
11/16
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
0.313
0.313
0.438
0.563
0.700
0.688
0.906
1.125
328
l2
l3
a
Inch
0.234
0.234
0.328
0.421
0.531
0.515
0.679
0.843
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
3/8
7/16
1/2
5/8
11/16
13/16
4
4
4
4
4
4
5
5
1010921
1010925
1010923
1010927
1010929
1010931
1010933
1010935
1542(NPS) - 1592(NPSF)
Ɣ Pipe Tap
Ɣ Tarauds machine
1542(NPS)
Ŷ
Ɣ
l1
l2
NPS
TPI
Inch
Inch
d2
Ø
Inch /
1/8
1/8
1/4
3/8
1/2
3/4
1“
27
27
18
18
14
14
11.5
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
0.313
0.438
0.563
0.700
0.688
0.906
1.125
l3
a
Inch
0.234
0.328
0.421
0.531
0.515
0.679
0.843
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
7/16
1/2
5/8
11/16
13/16
4
4
4
4
4
5
5
1010587
1010581
1010582
1010583
1010584
1010585
1010586
1592(NPSF)
Ɣ Pipe Tap
Ɣ Dryseal
Ɣ Tarauds machine
Ŷ
Ɣ
l1
NPSF
TPI
mm
mm
d2
Ø
Inch /
1/8
1/8
1/4
3/8
1/2
3/4
27
27
18
18
14
14
2.1/8
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3/4
3/4
1.1/16
1.1/16
1.3/8
1.3/8
0.313
0.438
0.563
0.700
0.688
0.906
l2
l3
a
Inch
0.234
0.328
0.421
0.531
0.515
0.679
Inch
#
Flutes
EDP #
or
e-Code
3/8
3/8
7/16
1/2
5/8
11/16
4
4
4
4
4
5
1010592
1010588
1010589
1010590
1010591
1011070
329
E040 - E041
E040
Ŷ
Ɣ
G(BSP)
TPI
d1
nom
mm
1/8
1/4
3/8
1/2
3/4
28
19
19
14
14
9.728
13.157
16.662
20.955
26.441
l1
l2
mm
mm
d2
Ø
mm
90
100
100
125
140
15
19
21
26
28
8
10
12.5
16
20
l3
a
mm
6.3
8
10
12.5
16
mm
#
Flutes
9
11
13
16
20
3
3
3
4
4
EDP #
or
Stock # e-Code
8.80
11.80
15.25
19.00
24.50
0569764
0569771
0569788
0569795
0569801
E0401/8
E0401/4
E0403/8
E0401/2
E0403/4
E041
Ŷ
Ɣ
G(BSP)
TPI
d1
nom
mm
1/8
1/4
3/8
1/2
3/4
28
19
19
14
14
9.728
13.157
16.662
20.955
26.441
330
l1
l2
mm
mm
d2
Ø
mm
90
100
100
125
140
15
19
21
26
28
8
10
12.5
16
20
l3
a
mm
6.3
8
10
12.5
16
mm
#
Flutes
9
11
13
16
20
3
3
3
4
4
8.80
11.80
15.25
19.00
24.50
Stock #
EDP #
or
e-Code
0569818
0569825
0569832
0569849
0569856
E0411/8
E0411/4
E0413/8
E0411/2
E0413/4
E042 - E043
E042
Ŷ
Ɣ
G(BSP)
TPI
d1
nom
mm
1/8
1/4
3/8
1/2
3/4
28
19
19
14
14
9.728
13.157
16.662
20.955
26.441
l1
l2
mm
mm
d2
Ø
mm
90
100
100
125
140
15
19
21
26
28
8
10
12.5
16
20
l3
a
mm
6.3
8
10
12.5
16
mm
#
Flutes
9
11
13
16
20
3
3
4
4
4
8.80
11.80
15.25
19.00
24.50
Stock #
EDP #
or
e-Code
0569863
0569870
0569887
0569894
0569900
E0421/8
E0421/4
E0423/8
E0421/2
E0423/4
E043
Ŷ
Ɣ
G(BSP)
TPI
d1
nom
mm
1/8
1/4
3/8
1/2
3/4
28
19
19
14
14
9.728
13.157
16.662
20.955
26.441
l1
l2
mm
mm
d2
Ø
mm
90
100
100
125
140
15
19
21
26
28
8
10
12.5
16
20
l3
a
mm
6.3
8
10
12.5
16
mm
#
Flutes
9
11
13
16
20
3
3
4
4
4
EDP #
or
Stock # e-Code
8.80
11.80
15.25
19.00
24.50
0569917
0569924
0569931
0569948
0569955
E0431/8
E0431/4
E0433/8
E0431/2
E0433/4
331
E547
Ɣ Machine Tap
Ɣ BSPP
Ɣ Tarauds machine
Ɣ
G(BSP)
TPI
d1
nom
mm
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1“
1“
1“
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
28
28
28
28
19
19
19
19
19
19
19
19
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
11
11
11
11
11
11
11
11
11
11
11
9.728
9.728
9.728
9.728
13.157
13.157
13.157
13.157
16.662
16.662
16.662
16.662
20.955
20.955
20.955
20.955
22.911
22.911
22.911
22.911
26.441
26.441
26.441
26.441
30.201
30.201
30.201
33.249
33.249
33.249
41.910
41.910
41.910
47.803
47.803
47.803
53.746
53.746
332
l1
l2
mm
mm
d2
Ø
mm
59
59
59
59
67
67
67
67
75
75
75
75
87
87
87
87
91
91
91
91
96
96
96
96
102
102
102
109
109
109
119
119
119
125
125
125
132
132
15
15
15
15
19
19
19
19
21
21
21
21
26
26
26
26
26
26
26
26
28
28
28
28
29
29
29
33
33
33
36
36
36
37
37
37
39
39
8.0
8.0
8.0
8.0
10.0
10.0
10.0
10.0
12.5
12.5
12.5
12.5
16.0
16.0
16.0
16.0
18.0
18.0
18.0
18.0
20.0
20.0
20.0
20.0
22.4
22.4
22.4
25.0
25.0
25.0
31.5
31.5
31.5
35.5
35.5
35.5
35.5
35.5
l3
a
mm
8.0
6.3
6.3
6.3
8.0
8.0
8.0
8.0
10.0
10.0
10.0
10.0
12.5
12.5
12.5
12.5
14.0
14.0
14.0
14.0
16.0
16.0
16.0
16.0
18.0
18.0
18.0
20.0
20.0
20.0
25.0
25.0
25.0
28.0
28.0
28.0
28.0
28.0
mm
#
Flutes
9
9
9
9
11
11
11
11
13
13
13
13
16
16
16
16
18
18
18
18
20
20
20
20
22
22
22
24
24
24
28
28
28
31
31
31
31
31
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
8.8
8.8
8.8
8.8
11.8
11.8
11.8
11.8
15.25
15.25
15.25
15.25
19
19
19
19
21
21
21
21
24.5
24.5
24.5
24.5
28.25
28.25
28.25
30.75
30.75
30.75
39.5
39.5
39.5
45
45
45
51
51
Stock #
EDP #
or
e-Code
0157169
0157176
0099285
0157183
0157190
0157206
0099278
0157213
0157220
0157237
0099315
0157244
0157251
0157268
0099261
0157275
0157282
0099322
0099339
0340684
0157299
0150757
0099308
0160763
0157305
0099353
0099360
0157312
0157329
0099254
0157336
0099216
0099223
0157343
0099193
0099209
0157350
0099230
E5471/8NO1
E5471/8NO2
E5471/8NO3
E5471/8NO7
E5471/4NO1
E5471/4NO2
E5471/4NO3
E5471/4NO7
E5473/8NO1
E5473/8NO2
E5473/8NO3
E5473/8NO7
E5471/2NO1
E5471/2NO2
E5471/2NO3
E5471/2NO7
E5475/8NO1
E5475/8NO2
E5475/8NO3
E5475/8NO7
E5473/4NO1
E5473/4NO2
E5473/4NO3
E5473/4NO7
E5477/8NO1
E5477/8NO2
E5477/8NO3
E5471NO1
E5471NO2
E5471NO3
E5471.1/4NO1
E5471.1/4NO2
E5471.1/4NO3
E5471.1/2NO1
E5471.1/2NO2
E5471.1/2NO3
E5471.3/4NO1
E5471.3/4NO2
E547 - E550
E547
G(BSP)
TPI
d1
nom
mm
1.3/4
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
3“
3“
3“
11
11
11
11
11
11
11
11
11
11
11
11
11
53.746
59.614
59.614
59.614
65.710
65.710
65.710
75.184
75.184
75.184
87.884
87.884
87.884
l1
l2
mm
mm
d2
Ø
mm
132
140
140
140
142
142
142
153
153
153
164
164
164
39
41
41
41
42
42
42
45
45
45
48
48
48
35.5
40.0
40.0
40.0
40.0
40.0
40.0
45.0
45.0
45.0
50.0
50.0
50.0
Stock #
EDP #
or
e-Code
0099247
0157367
0157374
0099292
0157404
0157411
0123775
0157381
0157398
0123768
0157428
0157435
0123782
E5471.3/4NO3
E5472NO1
E5472NO2
E5472NO3
E5472.1/4NO1
E5472.1/4NO2
E5472.1/4NO3
E5472.1/2NO1
E5472.1/2NO2
E5472.1/2NO3
E5473NO1
E5473NO2
E5473NO3
l3
a
mm
28.0
31.5
31.5
31.5
31.5
31.5
31.5
35.5
35.5
35.5
40.0
40.0
40.0
mm
#
Flutes
31
34
34
34
34
34
34
38
38
38
42
42
42
6
6
6
6
6
6
6
6
6
6
8
8
8
51
57
57
57
63
63
63
72.5
72.5
72.5
85.5
85.5
85.5
E550
Ɣ Machine Tap
Ɣ BSPT
Ɣ Tarauds machine
Ŷ
Ɣ
Rc
TPI
d1
nom
mm
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1.1/4
1.1/2
2“
28
28
19
19
19
19
14
14
14
14
11
11
11
11
9.728
9.728
13.157
13.157
16.662
16.662
20.955
20.955
26.441
26.441
33.249
41.910
47.803
59.614
l1
l2
mm
mm
d2
Ø
mm
59
59
67
67
75
75
87
87
96
96
109
119
125
140
15
15
19
19
21
21
26
26
28
28
33
36
37
41
8.0
8.0
10.0
10.0
12.5
12.5
16.0
16.0
20.0
20.0
25.0
31.5
35.5
40.0
l3
a
mm
6.3
6.3
8.0
8.0
10.0
10.0
12.5
12.5
16.0
16.0
20.0
25.0
28.0
31.5
mm
#
Flutes
9
9
11
11
13
13
16
16
20
20
24
28
31
34
3
3
3
3
3
3
5
5
5
5
5
5
7
7
EDP #
or
Stock # e-Code
8.4
8.4
11.2
11.2
14.75
14.75
18.25
18.25
23.75
23.75
30
38.5
44.5
56
0099490
0159408
0099483
0159422
0099520
0159446
0099476
0159460
0099513
0159484
0099445
0099469
0099452
0099506
E5501/8
E5501/8NO7
E5501/4
E5501/4NO7
E5503/8
E5503/8NO7
E5501/2
E5501/2NO7
E5503/4
E5503/4NO7
E5501
E5501.1/4
E5501.1/2
E5502
333
1994(UNC) (UNF)
Ɣ Combination Drill and Tap
Ɣ Foret taraudeur
Ɣ Combinación broca-macho
1994(UNC)
Ɣ
l1
l2
UNC
TPI
Inch
Inch
d2
Ø
Inch
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
40
40
32
32
24
24
20
18
16
14
13
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.27/32
3.3/8
3.3/4
4.1/16
3/8
13/32
7/16
1/2
5/8
21/32
25/32
15/16
1.1/16
1.1/4
1.3/8
0.141
0.141
0.141
0.168
0.194
0.220
0.255
0.318
0.381
0.323
0.367
l3
a
Inch
0.110
0.110
0.110
0.131
0.152
0.165
0.191
0.238
0.286
0.242
0.275
Inch
#
Flutes
EDP #
or
e-Code
3/16
3/16
3/16
1/4
1/4
9/32
5/16
3/8
7/16
13/32
7/16
2
2
2
2
2
2
2
2
2
2
2
1110010
1110020
1110030
1110040
1110050
1110060
1110080
1110090
1110100
1110110
1110120
1994(UNF)
Ɣ
l1
UNF
TPI
Inch
Inch
d2
Ø
Inch
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
48
44
40
36
32
28
28
24
24
20
20
1.7/8
1.15/16
2“
2.1/8
2.3/8
2.3/8
2.1/2
2.27/32
3.3/8
3.3/4
4.1/16
3/8
13/32
7/16
1/2
5/8
21/32
25/32
15/16
1.1/16
1.1/4
1.3/8
0.141
0.141
0.141
0.168
0.194
0.220
0.255
0.318
0.381
0.323
0.367
334
l2
Inch
#
Flutes
EDP #
or
e-Code
3/16
3/16
3/16
1/4
1/4
9/32
5/16
3/8
7/16
13/32
7/16
2
2
2
2
2
2
2
2
2
2
2
1110012
1110024
1110034
1110044
1110054
1110064
1110084
1110094
1110104
1110114
1110124
l3
a
Inch
0.110
0.110
0.110
0.131
0.152
0.165
0.191
0.238
0.286
0.242
0.275
E650 - E651
Ɣ Foret taraudeur
E650
Ɣ
M
d1
Ø
mm
l1
P
mm
mm
mm
mm
d2
Ø
mm
3
4
5
6
8
10
12
14
16
0.50
0.70
0.80
1.00
1.25
1.50
1.75
2.00
2.00
2.5
3.3
4.2
5.0
6.8
8.5
10.2
12.0
14.0
56
65
69
84
96
108
113
123
134
10
12
15
18
21
22
29
30
32
6
8
10
12
16
20
24
28
32
3.15
4.0
5.0
6.3
8.0
10.0
9.0
11.2
12.5
l2
l4
l3
a
mm
2.5
3.15
4.00
5.00
6.30
8.00
7.10
9.00
10.00
mm
#
Flutes
Stock #
EDP #
or
e-Code
5.0
6.0
7.0
8.0
9.0
11.0
10.0
12.0
13.0
2
2
2
2
2
2
2
2
2
0167861
0127551
0127568
0127575
0127582
0127513
0127520
0127537
0127544
E650M3
E650M4
E650M5
E650M6
E650M8
E650M10
E650M12
E650M14
E650M16
E651
Ɣ
UNC
TPI
d1
nom
mm
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
32
32
24
24
20
18
16
14
13
12
11
2.80
3.50
3.90
4.50
5.20
6.60
8.00
9.40
10.80
12.20
13.50
d2
Ø
mm
l1
3.5
4.50
5.00
5.60
6.30
8.00
10.00
8.00
9.00
11.20
12.50
56.9
64
72
77
83
94
104
107
114
124
134
l4
mm
l2
mm
6
8
10
11
13
16
19
22
25
28
32.5
12
12
15
15
17
21
23
25
29
29
31
a
mm
2.90
3.55
4.00
4.50
5.00
6.30
8.00
6.30
7.10
9.00
10.00
5.00
6.00
7.00
7.00
8.00
9.00
11.00
9.00
10.00
12.00
13.00
Dormer
Stock
No.
EDP #
or
e-Code
0388907
0273272
0273197
0273210
0273227
0273241
0273234
0273265
0273203
0273289
0273258
E6516-32
E6518-32
E65110-24
E65112-24
E6511/4
E6515/16
E6513/8
E6517/16
E6511/2
E6519/16
E6515/8
335
E653
Ɣ Foret taraudeur
Ɣ
d1
Ø
Inch
TPI
Inch
Inch
d2
Ø
Inch
1/16
1/8
1/4
3/8
1/2
3/4
1“
27
27
18
18
14
14
11.5
2.13/16
2.7/8
3.5/16
3.1/2
4.3/8
4.9/16
5.3/8
11/16
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
0.3120
0.4370
0.5620
0.7000
0.6870
0.9060
1.1250
336
l1
l2
a
Inch
0.2340
0.3280
0.4210
0.5310
0.5150
0.6790
0.8430
z
Stock
Code
Dormer
Stock
No.
EDP #
or
e-Code
4
4
4
4
4
5
5
52788
52791
52794
52797
52800
52803
52806
0297254
0297285
0297278
0297308
0297261
0297292
0297247
E6531/16
E6531/8
E6531/4
E6533/8
E6531/2
E6533/4
E6531
229C - 1215
Ɣ Drill-Tap Set, Metal Index
Ɣ A=Type of Product in Set, B= No of Pieces, C= Diameters in set
Ɣ Juego de Brocas/ Machos, serie corta
229C
Nr.
229C
A
1500,1528 taps; R10P and R18P drills
B
9
UNC
6-32,8-32,10-24,10-32,1/4-20,5/16-18,3/8-16,7/16-14,1/2-13
EDP #
or
e-Code
4111502
1215
Ɣ Tap Wrench
Ɣ Designed for hand tapping in tight places
and can also be used with any tool that
can be turned by hand
Ɣ T-Handle furnished with a sliding handle.
They are strong and rugged yet light
enough to ensure easy and accurate
handling
Nr.
T0
T1
T2
Hand
Reamer
Capacity (inch)
1/8 - 3/16
3/16 - 5/16
1/4 - 15/32
Ɣ Tourne à gauche
Hand
Reamer
Capacity (mm)
M3 - M5
M4 - M7
M6 - M14
Fractional
Tap
Capacity (inch)
1/16 - 5/32
3/16 - 7/16
1/4 - 9/16
Ɣ Portamachos regulable
Fractional
Tap
Capacity (mm)
M1 - M4
M4 - M10
M6 - M14
EDP #
or
e-Code
1810372
1810373
1810374
337
1301/8007 - 3850
Ɣ Die Stocks
Ɣ Designed for use with adjustable
round split dies
Ɣ The die is held securely by two
opposed screws in the stock
which locate in two indents in
the die
Ɣ Porte filières
Ɣ Maneta para Terrajas “ Portaterrajas”
1301 - 8007
Die
Stock
#
D2
D3
D6
D14
200 (Style = 8007)
Overall
Length
Takes
Die O.D.
6.3/8
9
14
40.3/4
14.3/4
13/16
1
1.1/2
3
2
EDP #
or
e-Code
1810042
1810043
1810096
1810034
1810053
3850
Ɣ Tourne à gauche
Ɣ Tap Wrench
Ɣ Designed for hand tapping in
tight places and can also be used
with any tool that can be turned
by hand
Ɣ Straight handle design provides
greater leverage, particularly suited
for use with larger diameters
Nr.
8
9
10
11
12
14
338
Hand
Reamer
Capacity (inch)
1/8 - 5/16
3/16 - 3/8
1/4 - 9/16
3/8 - 3/4
3/8 - 7/8
5/8 - 1.1/2
Ɣ Portamachos regulable
Hand
Reamer
Capacity (mm)
M3 - M8
M5 - M9
M6 - M14
M9 - M19
M9 - M22
M16 - M39
Fractional
Tap
Capacity (inch)
1/16-5/16
3/16-1/2
1/4-3/4
3/8-1“
3/8-1.1/8
7/8-1.7/8
Fractional
Tap
Capacity (mm)
M1 - M8
M4 - M12
M3 - M8
M10 - M25
M10 - M27
M22 - M42
EDP #
or
e-Code
1810017
1810018
1810019
1810020
1810021
1810022
2025(UNC) (UNF) (UNS) (NPT)
Ɣ Hexagon Rethreading Bolt Dies
Ɣ Filières hexagonales BSPF
Ɣ Terrajas, exterior hexagonal
d2
UNC
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
UNS
11/16
11/16
1“
TPI
20
18
16
14
13
12
11
10
9
8
7
7
6
6
TPI
11
16
14
d2
Ø
Inch
19/32
11/16
25/32
7/8
1.1/16
1.1/16
1.1/4
1.7/16
1.5/8
1.13/16
2“
2.3/16
2.3/8
2.9/16
h1
Inch
1/2
5/16
3/8
7/16
1/2
1/2
5/8
3/4
7/8
1
1
1
1
1
d2
Ø
Inch
1.7/16
1.7/16
1.13/16
EDP #
or
e-Code
1410239
1410241
1410243
1410245
1410247
1410249
1410251
1410255
1410257
1410259
1410262
1410264
1410266
1410268
h1
Inch
3/4
3/4
1“
UNF
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
EDP #
or
e-Code
1410253
1410254
1410261
d2
NPT
1/8
1/4
3/8
1/2
3/4
1“
TPI
28
24
24
20
20
18
18
16
14
12
12
12
12
12
d2
Ø
Inch
19/32
11/16
25/32
7/8
1.1/16
1.1/16
1.1/4
1.7/16
1.5/8
1.13/16
2“
2.3/16
2.3/8
2.9/16
TPI
27
18
18
14
14
11.1/2
h1
Inch
1/2
5/16
3/8
7/16
1/2
1/2
5/8
3/4
7/8
1“
1“
1“
1“
1“
d2
Ø
Inch
1.1/6
1.1/4
1.1/16
1.5/8
2“
2.3/8
EDP #
or
e-Code
1410240
1410242
1410244
1410246
1410248
1410250
1410252
1410256
1410258
1410260
1410263
1410265
1410267
1410269
h1
Inch
3/8
5/8
5/8
3/4
13/16
1“
EDP #
or
e-Code
1410270
1410271
1410272
1410273
1410274
1410275
339
2025S - 2325M
2025S
Nr.
set 821
set 822
set 831
set 832
set 824
set 825
EDP #
or
A
B
UNC
UNF
e-Code
Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4
1410277
Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4,7/8,1“
1410278
Hexagon Dienut 1 each
1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4
1410280
Hexagon Dienut 1 each
1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4,7/8,1-14(UNS) 1410281
Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2
1/4,5/16,3/8,7/16,1/2
1410282
Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4
1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4
1410283
2325M
d2
M
6.0
7.0
8.0
9.0
10.0
11.0
340
P
mm
1.00
1.00
1.25
1.25
1.50
1.50
d2
Ø
Inch
19/32
11/16
11/16
25/32
7/8
7/8
h1
Inch
1/4
5/16
5/16
3/8
7/16
7/16
EDP #
or
e-Code
1410609
1410610
1410611
1410612
1410613
1410614
M
12.0
14.0
14.0
16.0
18.0
18.0
20.0
P
mm
1.75
1.25
2.00
2.00
1.50
2.50
2.50
d2
Ø
Inch
1.1/16
1.1/16
1.1/16
1.1/4
1.7/16
1.7/16
1.7/16
h1
Inch
1/2
1/2
1/2
5/8
3/4
3/4
3/4
EDP #
or
e-Code
1410615
1410617
1410616
1410618
1410620
1410619
1410621
2010(UNC) (UNF)
Ɣ Round Adjustable Split Dies
Ɣ Used for threading bolts, studs, rods and
other applications requiring external threads
UNC
1
2
3
4
5
6
6
8
8
10
10
12
12
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
TPI
64
56
48
40
40
32
32
32
32
24
24
24
24
20
20
20
20
18
18
18
18
16
16
16
14
14
14
13
13
12
12
11
11
10
9
8
7
7
6
6
d2
Ø
Inch
13/16
13/16
13/16
13/16
13/16
13/16
1“
13/16
1“
13/16
1“
13/16
1“
13/16
1“
1.1/2
2“
13/16
1“
1.1/2
2“
1“
1.1/2
2“
1“
1.1/2
2“
1.1/2
2“
1.1/2
2“
1.1/2
2“
2“
2“
3“
3“
3“
3“
3“
EDP #
or
e-Code
1410004
1410008
1410012
1410016
1410022
1410026
1410027
1410032
1410033
1410038
1410039
1410044
1410045
1410063
1410064
1410066
1410067
1410079
1410080
1410082
1410083
1410093
1410095
1410096
1410101
1410103
1410104
1410110
1410111
1410117
1410118
1410123
1410124
1410131
1410135
1410140
1410145
1410147
1410149
1410151
Ɣ Filières extensibles
UNF
0
1
2
3
4
5
6
8
10
10
12
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
7/16
1/2
1/2
9/16
9/16
5/8
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
TPI
80
72
64
56
48
44
40
36
32
32
28
28
28
28
28
32
24
24
24
32
24
24
24
20
20
20
20
20
18
18
18
18
16
14
12
12
12
12
12
d2
Ø
Inch
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
1“
13/16
13/16
1“
1.1/2
2“
1“
1“
1.1/2
2“
1“
1“
1.1/2
2“
1“
1.1/2
2“
1.1/2
2“
1.1/2
2“
1.1/2
2“
2“
2“
3“
3“
3“
3“
3“
Ɣ Terraja tipo abierto
EDP #
or
e-Code
1410002
1410006
1410010
1410014
1410018
1410024
1410029
1410035
1410041
1410042
1410047
1410068
1410069
1410071
1410072
1410077
1410085
1410087
1410088
1410090
1410097
1410099
1410100
1410105
1410107
1410108
1410114
1410115
1410120
1410121
1410126
1410127
1410133
1410137
1410142
1410146
1410148
1410150
1410152
341
2010(UNS) (NPT) - 2510(UNC)
other applications requiring external
threads
2010(UNS) (NPT)
UNS
4
1/4
1“
TPI
36
24
14
d2
Ø
Inch
13/16
1“
3“
EDP #
or
e-Code
1410020
1410074
1410144
NPT
1/8
1/8
1/4
1/4
3/8
3/8
1/2
TPI
27
27
18
18
18
18
14
d2
Ø
Inch
1“
1.1/2
1.1/2
2“
1.1/2
2“
2“
EDP #
or
e-Code
1410203
1410204
1410205
1410206
1410207
1410208
1410209
2510(UNC)
threads
UNC
5
6
6
8
8
10
10
12
12
1/4
1/4
1/4
5/16
342
TPI
40
32
32
32
32
24
24
24
24
20
20
20
18
d2
Ø
Inch
13/16
13/16
1“
13/16
1“
13/16
1“
13/16
1“
13/16
1“
1.1/2
13/16
EDP #
or
e-Code
1410153
1410155
1410156
1410159
1410160
1410163
1410164
1410167
1410168
1410171
1410172
1410173
1410177
UNC
5/16
5/16
3/8
3/8
7/16
7/16
1/2
9/16
5/8
5/8
3/4
7/8
TPI
18
18
16
16
14
14
13
12
11
11
10
9
d2
Ø
Inch
1“
1.1/2
1“
1.1/2
1“
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
EDP #
or
e-Code
1410178
1410179
1410183
1410184
1410187
1410188
1410191
1410193
1410195
1410196
1410199
1410201
2510(UNF) - 2710M
threads
2510(UNF)
UNF
5
6
8
10
10
12
1/4
1/4
1/4
5/16
5/16
TPI
44
40
36
32
32
28
28
28
28
24
24
d2
Ø
Inch
13/16
13/16
13/16
13/16
1“
13/16
13/16
1“
1.1/2
13/16
1“
EDP #
or
e-Code
1410154
1410157
1410161
1410165
1410166
1410169
1410174
1410175
1410176
1410180
1410181
UNF
5/16
3/8
3/8
7/16
7/16
1/2
9/16
5/8
5/8
3/4
7/8
TPI
24
24
24
20
20
20
18
18
18
16
14
d2
Ø
Inch
1.1/2
1“
1.1/2
1“
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
EDP #
or
e-Code
1410182
1410185
1410186
1410189
1410190
1410192
1410194
1410197
1410198
1410200
1410202
2710M
threads
M
2.0
2.3
2.5
2.6
3.0
3.5
4.0
4.5
5.0
6.0
7.0
8.0
P
mm
0.40
0.40
0.45
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.25
d2
Ø
Inch
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
1“
1“
1“
EDP #
or
e-Code
1410573
1410574
1410575
1410576
1410577
1410578
1410579
1410580
1410581
1410582
1410583
1410584
M
9.0
10.0
11.0
12.0
12.0
14.0
16.0
18.0
20.0
P
mm
1.25
1.50
1.50
1.75
1.75
2.00
2.00
2.50
2.50
d2
Ø
Inch
1“
1“
1“
1“
1.1/2
1.1/2
1.1/2
2“
2“
EDP #
or
e-Code
1410585
1410586
1410587
1410630
1410588
1410589
1410590
1410591
1410592
343
3150
Ɣ Tap and Round Die Screw Plate Sets
Ɣ One plug tap and one round die for each cutting size
Die
Stock #
D-6
Die
Stock
Length
14“
Tap
Wrench #
8-10
Outside
Diameter
Dies
1.1/2“
EDP #
or
e-Code
1610078
D-6
14“
10
1.1/2
1610079
General Purpose: UNC TAP SIZES: 1/4-20, 5/16-18,
3/8-16, 1/2-13, 9/16-12, 5/8-11, 2-56, 3-48, 6-32,
8-32,10-24,12-24
UNF TAP SIZES: 1/4-28, 5/16-24, 3/8-24, 1/2-20, 9/16-18,
5/8-18 UNS SIZE: 4-36 (42 piece set)
D-2 & D-6
7“-14“
8-10
13/16“(UNC);
1.1/2(UNC)
1610080
70H: UNC TAP SIZES: 4-36NS, 6-32, 8-32, 10-24, 12-24,
1/4 - 20, 5/16 - 18 (16 piece set)
D-2
7“
8
13/16“
1610065
D-2
7“
8
13/16“
1610067
70M: UNF TAP SIZES: NC and NF 4-36 NS, 6-32, 8-32,
10-24, 10-32, 12-24, 1/4-20 (16 piece set)
D-2
7“
8
13/16“
1610070
70P: UNF TAP SIZES: NC and NF 4-40, 4-48, 6-32,
6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28 (22 piece set)
D-2
7“
8
13/16“
1610072
90A: UNC TAP SIZES: 1/4-20, 5/16-18, 3/8-16, 7/16-14,
1/2-13, 5/8-11 (15 piece set)
D3, D-6
9“-14“
10
1/4“ to 3/8“-1,
7/16“ to 5/8“1.1/2“
1610076
90B: UNF TAP SIZES :1/4-28, 5/16-24, 3/8-24, 7/16-20,
1/2-20, 5/8-18, 3/4-16, 7/8-14 (22 piece set)
D-3, D-6
200
9“-14“-16“ 9 and 11
1/4“ to 3/8“-1“;
7/16“ to 5/8“-1
.1/2“;
3/4“ to 7/8“-2“
1610077
*
1702M: M2.0 x 0.40, M2.5 x 0.45, M3.0 x 0.50,
M3.5 x 0.60, M4.0 x 0.70, M4.5 x 0.75, M5.0 x 0.80 AND 1.6
mm, 2.05 mm, 2.5 mm, 2.9 mm, 3.3 mm, 3.7 mm, 4.2 mm
(23 piece set)
D-2
7“
T-0
13/16“
1610087
*
1703M: M6 x 1.00, M7 x 1.00, M8 x 1.25, M10 x 1.50,
M12 x 1.75 AND 5.0 mm, 6.0 mm, 6.7 mm, 8.5 mm,
10.2 mm (17 piece set)
D-3
9“
T-2
1“
1610088
Style
3150
Description
Master Series: UNC TAP SIZES: 1/4-20, 5/16-18, 3/8-16,
7/16-14,1/2-13, 9/16-12, 5/8-11 (16 piece set)
UNF TAP SIZES: 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20,
9/16-18, 5/8-18
(16 piece set)
1.1/2(UNF)
70K: UNC TAP SIZES: 2-56, 3-48, 4-36 NS,
5-40, 6-32, 8-32, 10-24, 12-24, 1/4-20,
5/16 -18 (22 piece set)
*One plug tap, one round die and one tap drill for each cutting size
344
Solid Carbide End Mill Table of Contents
Style
High Helix
E3603
E3603G
E3603V
2-Flute
E1302
E1302G
E1302V
E2302
E3302
E3302G
E3302V
E3302M
E3302MG
E3302MV
EB3302
EB3302G
EB3302V
EB3302M
EB3302MG
EB3302MV
E4302
EB4302
E6302
E6302G
E6302V
EB6302
EB6302G
EB6302V
3-Flute
E3303
E3303G
E3303V
4-Flute
E1304
E1304G
E1304V
E2304
E3304
E3304G
E3304V
E3304M
E3304MG
E3304MV
EB3304
EB3304G
EB3304V
EB3304M
EB3304MG
EB3304MV
E4304
EB4304
E6304
E6304G
E6304V
EB6304
EB6304G
EB6304V
RTDA
Description
#Flutes
Finish
60°, High Helix
60°, High Helix
60°, High Helix
3-Flute
3-Flute
3-Flute
Bright
TiN
TiALN
354
354
355
Stub Length
Stub Length
Stub Length
Stub Length
Regular Length
Regular Length
Regular Length
Regular Length, Metric
Ball Nose, Regular Length
Ball Nose, Regular Length, Metric
Double End, Regular Length
Ball Nose, Double End, Regular Length
Extra Length
Extra Length
Extra Length
Ball Nose, Extra Length
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
3-Flute
3-Flute
3-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
Bright
TiN
TiALN
Bright
Bright
TiN
TiALN
Bright
TiN
TiALN
Bright
TiN
TiALN
Bright
TiN
TiALN
Bright
Bright
Bright
TiN
TiALN
Bright
TiN
TiALN
355
356
356
357
357
358
359
360
361
362
363
364
365
366
367
368
368
369
369
370
370
371
371
372
Regular Length
Regular Length
Regular Length
3-Flute
3-Flute
3-Flute
Bright
TiN
TiALN
372
373
373
Stub Length
Stub Length
Stub Length
Stub Length
Regular Length
Regular Length
Regular Length
Ball Nose, Double End, Regular Length
Extra Length
Extra Length
Extra Length
Router
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
3-Flute
Bright
TiN
TiALN
Bright
Bright
TiN
TiALN
Bright
TiN
TiALN
Bright
TiN
TiALN
Bright
TiN
TiALN
Bright
Bright
Bright
TiN
TiALN
Bright
TiN
TiALN
Bright
374
374
375
375
376
377
378
379
380
381
382
383
384
385
386
384
386
387
387
388
388
389
389
390
390
Page No.
345
Feed Rate Chart - Solid Carbide End Mills
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code).
2. Find the closest diameter for your cutting application on the chart.
3. Select the type of cut and # Flutes to find your Ft Range.
# of
Flutes
Type of
Cut
Depth/
Width
of Cut
Feed Per Tooth (Ft) Dia Inches
Alpha
Code
1/8
5/32
3/16
A
>4
3-4
3-4
2-3
Ľ 1,5
ļ 0,05
Ľ 1,5
ļ 0,1
Ľ1
ļ 0,5
Ľ 0,5
ļ1
1/4
5/16
13/32
1/2
9/16
5/8
11/16
3/4
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.004
B
0.002
0.002
0.002
0.003
0.003
0.004
0.004
C
0.003
0.003
0.004
0.004
0.005
0.005
0.006
0.007
0.002
0.002
0.003
0.003
0.004
0.004
0.005
A
0.001
0.001
0.002
0.002
B
0.001
0.002
0.002
0.003
0.003
0.004
0.004
0.005
0.005
0.006
0.007
C
0.001
0.002
0.002
0.003
0.004
0.005
0.006
0.006
0.007
0.008
0.009
A
0.000
0.000
0.000
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
B
0.003
0.000
0.001
0.001
0.001
0.002
0.002
0.002
0.003
0.003
0.004
C
0.000
0.001
0.001
0.001
0.002
0.002
0.003
0.003
0.004
0.004
0.005
A
0.000
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.003
B
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.003
0.003
0.004
0.004
C
0.001
0.001
0.001
0.002
0.002
0.003
0.003
0.004
0.004
0.005
0.005
0.001
0.002
0.003
0.003
0.003
0.004
0.004
0.004
Ľ 0,5
ļ1
B
3-4
Ľ1
ļ 0,5
2
&
4
4
A
Ľ
0,1 - 0,5mm
ļ
0,1 - 0,5mm
BC
Ľ
0,01 - 0,1
ļ
1
BC
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.003
0.003
0.001
0.001
0.001
0.002
0.002
0.002
0.003
0.003
0.004
A
0.002
0.002
0.002
0.003
0.003
0.002
0.002
0.003
0.003
0.004
Easy Calculations: (inch)
RPM = SFM/D x 3.82
F = Ft x T x RPM
Terms:
RPM = Revolutions Per Minute
F = Feed Inches Per Minute
Ft = Feed Per Tooth
T = Number of Teeth
D = Cutting Diameter
SFM = Surface Feet per Minute
346
Feed Rate Chart - Solid Carbide End Mills
# of
Flutes
>4
3-4
3-4
2-3
Type of
Cut
Depth/
Width
of Cut
Ľ 1,5
ļ 0,05
Ľ 1,5
ļ 0,1
Ľ1
ļ 0,5
Ľ 0,5
ļ1
Alpha
Code
Feed Per Tooth (Ft)
>0,5
0.6
0.8
1
2
3
4
Dia MM
5
6
8
10
12
14
16
18
20
A
0.015
0.020
0.025
0.030
0.035
0.040
0.050
0.060
B
0.045
0.050
0.060
0.075
0.080
0.090
0.100
0.110
C
0.065
0.075
0.090
0.110
0.120
0.130
0.150
0.170
A
0.010
0.020
0.030
0.040 0.045
0.050
0.060
0.075
0.080
0.090
0.100
0.120
B
0.015
0.030
0.040
0.055 0.065
0.075
0.090
0.110
0.120
0.130
0.150
0.170
C
0.015
0.030
0.040
0.055 0.085
0.100
0.120
0.140
0.150
0.170
0.200
0.220
A
0.001
0.003
0.005
0.008
0.010 0.013
0.020
0.027
0.035
0.040
0.050
0.055
0.060
B
0.002
0.004
0.008
0.012
0.015 0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
C
0.003
0.005
0.010
0.015
0.020 0.025
0.040
0.050
0.065
0.080
0.090
0.105
0.120
A
0.001
0.001
0.002
0.002
0.005
0.009
0.013
0.017 0.020
0.023
0.035
0.040
0.050
0.055
0.060
0.070
B
0.001
0.002
0.003
0.003
0.007
0.013
0.020
0.025 0.030
0.035
0.050
0.060
0.070
0.080
0.090
0.100
C
0.002
0.003
0.004
0.004
0.009
0.017
0.025
0.033 0.040
0.045
0.065
0.080
0.090
0.105
0.120
0.130
0.035
0.040
0.055
0.065
0.080
0.090
0.100
0.110
Ľ 0,5
ļ1
B
3-4
Ľ1
ļ 0,5
Ľ
0,1 - 0,5mm
ļ
0,1 - 0,5mm
A
0.010
0.017
0.023
0.028 0.032
0.040
0.050
0.055
0.070
0.080
2
&
4
BC
0.015
0.022
0.030
0.035 0.040
0.050
0.060
0.070
0.085
0.100
Ľ
0,01 - 0,1
ļ
1
0.040
0.050
0.055
0.065
0.080
4
BC
0.050 0.060 0.070 0.080
0.100
A
Easy Calculations: (MM)
RPM = (mm/min x 1000)
/ 3.14 x Diameter
F = mm/min = RPM x feed per
tooth x number of teeth
Terms:
RPM = Revolutions Per MM
F = Feed MM Per Minute
Ft = Feed Per Tooth
T = Number of Teeth
D = Cutting Diameter
347
Solid Carbide End Mills
Style:
Flutes:
E3603
3-Flute
High Helix
E3603G
3-Flute
High Helix
E3603V
3-Flute
High Helix
AMG Chart below.
2 Use the icons to find Type of Cut and other Product Features.
example:
289 B
289 = SFM
B = Alpha Code to find your Feed Rate
4
To calculate Feed Per Tooth, refer to chart on page 346-347.
Ŷ
Ɣ
Finish/Coating:
Axial Direction:
Slotting,
Ramping,
Diving
Slotting,
Ramping
Carbide
Helix Angle
Straight
Shank
Type of Cut:
2
Tool Length:
Shank:
Slotting
Ball Nose
Roughing
Finishing
Tolerance:
End Grind:
Helix Angle:
Material:
Icon Guide for Solid Carbide End Mills
3
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
348
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
354
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
354
355
Ŷ151B
Ŷ161B
Ŷ200B
Ŷ200A
Ŷ141A
Ŷ112A
Ŷ89A
Ŷ249A
Ŷ161A
Ŷ131A
Ŷ105A
Ŷ325A
Ŷ226A
Ŷ174A
Ŷ131A
Ŷ161B
Ŷ144B
Ŷ131B
Ŷ171B
Ŷ115A
Ŷ66A
Ŷ184B
Ŷ180B
Ŷ151B
Ŷ184B
Ŷ131A
Ŷ75A
Ŷ230B
Ŷ200B
Ŷ190B
Ŷ230B
Ŷ161A
Ŷ98A
Solid Carbide End Mills (con‘t)
E1302
E1302V
2-Flute
2-Flute
E2302
E3302
E3302G
E3302V
E3302M
E3302MG
E3302MV
EB3302
EB3302G
2-Flute 2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
EB3302V
EB3302M
2-Flute
2-Flute
EB3302MG
2-Flute
2-Flute
E1302G
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
355
356
356
357
357
358
359
360
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ325B
Ŷ249B
Ŷ249B
Ŷ200B
Ŷ180B
Ɣ161B
Ŷ400B
Ŷ298B
Ŷ298B
Ŷ259B
Ŷ230B
Ŷ200B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ325B
Ŷ249B
Ŷ249B
Ŷ200B
Ŷ180B
Ɣ161B
Ŷ400B
Ŷ298B
Ŷ298B
Ŷ259B
Ŷ230B
Ŷ200B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ325B
Ŷ249B
Ŷ249B
Ŷ200B
Ŷ180B
Ɣ161B
Ŷ400B
Ŷ298B
Ŷ298B
Ŷ259B
Ŷ230B
Ŷ200B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ325B
Ŷ249B
Ŷ249B
Ŷ200B
Ŷ180B
Ɣ161B
Ŷ400B
Ŷ298B
Ŷ298B
Ŷ259B
Ŷ230B
Ŷ200B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ325B
Ŷ249B
Ŷ249B
Ŷ200B
Ŷ180B
Ɣ161B
Ɣ200A
Ɣ141A
Ɣ108A
Ŷ249A
Ŷ161A
Ŷ131A
Ŷ325A
Ŷ223A
Ŷ174A
Ŷ200A
Ŷ141A
Ŷ108A
Ɣ200A Ŷ249A
Ɣ141A Ŷ161A
Ɣ108A Ŷ131A
Ŷ325A
Ŷ223A
Ŷ174A
Ɣ200A
Ɣ141A
Ɣ108A
Ŷ249A
Ŷ161A
Ŷ131A
Ŷ325A
Ŷ223A
Ŷ174A
Ŷ249A
Ŷ161A
Ŷ131A
Ŷ98A
Ŷ325A
Ŷ223A
Ŷ174A
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ŷ551B
Ɣ525B
Ŷ525B
Ɣ374B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B
Ɣ161A
Ɣ98A
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ŷ200A
Ŷ141A
Ŷ108A
Ŷ89A
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ŷ249A
Ŷ161A
Ŷ131A
Ŷ98A
Ŷ551B
Ɣ525B
Ŷ525B
Ɣ374B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B
Ɣ161A
Ɣ98A
Ŷ200A
Ŷ141A
Ŷ108A
Ŷ89A
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ɣ184B
Ɣ184B
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ125B
Ɣ649C
Ɣ400B
Ɣ649C
Ɣ400B
Ɣ400B
361
Ɣ184B
362
Ŷ551B
Ɣ525B
Ŷ525B
Ɣ374B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B
Ɣ161A
Ɣ98A
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ1499C
Ɣ1499C
Ɣ649C
Ɣ400B
363
364
Ɣ184B
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ1499C
Ɣ1499C
Ɣ649C
Ɣ400B
365
Ŷ551B
Ɣ525B
Ŷ525B
Ɣ374B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B
Ɣ161A
Ɣ98A
366
367
Ɣ184B
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ1499C
Ɣ1499C
Ɣ649C
Ɣ400B
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
349
EB3302MV
Style:
Flutes:
2-Flute
E4302
EB4302
2-Flute
2-Flute
AMG Chart below.
example:
289 B
289 = SFM
4
Ŷ
Ɣ
Finish/Coating:
Axial Direction:
Slotting,
Ramping,
Diving
Slotting,
Ramping
Carbide
Helix Angle
Straight
Shank
Type of Cut:
2
Tool Length:
Shank:
Slotting
Ball Nose
Roughing
Finishing
Tolerance:
End Grind:
Helix Angle:
Material:
3
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
350
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
368
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
368
369
Ŷ400B
Ŷ298B
Ŷ298B
Ŷ259B
Ŷ230B
Ŷ200B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ325A
Ŷ223A
Ŷ174A
Ŷ200A
Ŷ141A
Ŷ108A
Ŷ551B
Ɣ525B
Ŷ525B
Ɣ374B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B
Ɣ161A
Ɣ98A
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ŷ200A
Ŷ141A
Ŷ108A
Ŷ89A
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ1499C
Ɣ1499C
Ɣ649C
Ɣ400B
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ1499C
Ɣ1499C
Ɣ649C
Ɣ400B
E6302G
E6302V
EB6302
EB6302G
EB6302V
E3303
E3303G
E3303V
E1304
E1304G
E1304V
E2304
E3304
E3304G
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
3-Flute
3-Flute
3-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
4-Flute
E6302
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
369
370
370
371
372
373
374
374
376
377
Ŷ249B
Ŷ200B
Ŷ200B
Ŷ161B
Ŷ144B
Ɣ131B
Ŷ289B
Ŷ226B
Ŷ226B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ361B
Ŷ269B
Ŷ269B
Ŷ239B
Ŷ200B
Ŷ180B
Ŷ249B
Ŷ200B
Ŷ200B
Ŷ161B
Ŷ144B
Ɣ131B
Ŷ289B
Ŷ226B
Ŷ226B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ361B
Ŷ269B
Ŷ269B
Ŷ239B
Ŷ200B
Ŷ180B
Ŷ289B
Ŷ223B
Ŷ223B
Ŷ180B
Ŷ161B
Ɣ148B
Ŷ325B
Ŷ249B
Ŷ249B
Ŷ200B
Ŷ180B
Ɣ161B
Ŷ400B
Ŷ298B
Ŷ298B
Ŷ259B
Ŷ230B
Ŷ200B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ400B
Ŷ374B
Ŷ374B
Ŷ341B
Ŷ298B
Ɣ239B
Ŷ499B
Ŷ449B
Ŷ449B
Ŷ423B
Ŷ400B
Ŷ328B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ400B
Ŷ374B
Ŷ374B
Ŷ341B
Ŷ298B
Ɣ239B
Ŷ180A
Ŷ108A
Ŷ98A
Ɣ210A
Ɣ128A
Ɣ118A
Ŷ298A
Ŷ180A
Ŷ171A
Ŷ180A
Ŷ108A
Ŷ98A
Ŷ82A
Ŷ298B
Ɣ249B
Ŷ249B
Ɣ200B
Ɣ210A
Ɣ128A
Ɣ118A
Ŷ200A
Ŷ141A
Ŷ108A
Ŷ249A
Ŷ161A
Ŷ131A
Ŷ325A
Ŷ223A
Ŷ174A
Ŷ239A
Ŷ171A
Ŷ131A
Ɣ98A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ŷ276A
Ŷ200A
Ŷ151A
Ɣ121A
Ŷ351A
Ŷ276A
Ŷ200A
Ŷ239A
Ŷ171A
Ŷ131A
Ŷ276A
Ŷ200A
Ŷ151A
Ŷ105A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ɣ164B
Ŷ699B
Ŷ649B
Ŷ649B
Ŷ430B
Ŷ259B
Ɣ230B
Ɣ200B
Ɣ266B
Ɣ200A
Ɣ131A
Ŷ239A
Ŷ171A
Ŷ131A
Ŷ105A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ɣ148B
Ŷ298A
Ŷ180A
Ŷ171A
Ŷ89A
Ŷ499B
Ŷ400B
Ŷ400B
Ŷ341B
Ŷ200B
Ɣ180B
Ɣ174B
Ŷ200B
Ɣ141A
Ɣ85A
Ŷ584C
Ŷ449C
Ŷ449C
Ɣ108B
Ɣ1348C
Ɣ1348C
Ɣ584C
Ɣ361B
Ŷ584C
Ŷ449C
Ŷ449C
Ɣ108B
Ɣ1348C
Ɣ1348C
Ɣ584C
Ɣ361B
Ŷ298B
Ɣ249B
Ŷ249B
Ɣ200B
Ɣ164B
Ŷ584C
Ŷ449C
Ŷ449C
Ɣ108B
Ɣ1348C
Ɣ1348C
Ɣ584C
Ɣ361B
Ŷ584C
Ŷ449C
Ŷ449C
Ɣ108B
Ɣ1348C
Ɣ1348C
Ɣ584C
Ɣ361B
Ŷ499B
Ŷ400B
Ŷ400B
Ŷ341B
Ŷ200B
Ɣ180B
Ɣ174B
Ŷ200B
Ɣ141A
Ɣ85A
371
372
Ŷ374B
Ɣ318B
Ŷ318B
Ɣ249B
Ɣ184B
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ1499C
Ɣ1499C
Ɣ649C
Ɣ400B
373
Ŷ551B
Ɣ525B
Ŷ525B
Ɣ374B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B
Ɣ161A
Ɣ98A
Ɣ210B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
375
375
Ɣ210B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
351
Style:
Flutes:
E3304V
E3304M
E3304MG
4-Flute
4-Flute
4-Flute
AMG Chart below.
example:
289 B
289 = SFM
4
Ŷ
Ɣ
Finish/Coating:
Axial Direction:
Slotting,
Ramping,
Diving
Slotting,
Ramping
Carbide
Helix Angle
Straight
Shank
Type of Cut:
2
Tool Length:
Shank:
Slotting
Ball Nose
Roughing
Finishing
Tolerance:
End Grind:
Helix Angle:
Material:
3
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
352
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
Surface Feet per Minute SFM)
378
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
379
380
Ŷ499B
Ŷ449B
Ŷ449B
Ŷ423B
Ŷ400B
Ŷ328B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ400B
Ŷ374B
Ŷ374B
Ŷ341B
Ŷ298B
Ɣ239B
Ŷ351A
Ŷ276A
Ŷ200A
Ŷ164A
Ŷ699B
Ŷ649B
Ŷ649B
Ŷ430B
Ŷ259B
Ɣ230B
Ɣ200B
Ɣ266B
Ɣ200A
Ɣ131A
Ŷ239A
Ŷ171A
Ŷ131A
Ŷ105A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ŷ276A
Ŷ200A
Ŷ151A
Ŷ105A
Ɣ210B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
EB3304
4-Flute
4-Flute
EB3304G
4-Flute
EB3304V,MV
4-Flute
EB3304M
EB3304MG
E4304
4-Flute
4-Flute
4-Flute
EB4304
4-Flute
E6304
E6304G E6304V
4-Flute
4-Flute 4-Flute
4-Flute
EB6304
4-Flute
EB6304G
EB6304V
RTDA
4-Flute
4-Flute
3-Flute
E3304MV
386
387
387
388
388
389
Ŷ499B
Ŷ449B
Ŷ449B
Ŷ423B
Ŷ400B
Ŷ328B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ400B
Ŷ374B
Ŷ374B
Ŷ341B
Ŷ298B
Ɣ239B
Ŷ499B
Ŷ449B
Ŷ449B
Ŷ423B
Ŷ400B
Ŷ328B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ400B
Ŷ374B
Ŷ374B
Ŷ341B
Ŷ298B
Ɣ239B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ361B
Ŷ325B
Ŷ325B
Ŷ298B
Ŷ249B
Ɣ230B
Ŷ325B
Ŷ298B
Ŷ298B
Ŷ276B
Ŷ226B
Ɣ180B
Ŷ361B
Ŷ341B
Ŷ341B
Ŷ315B
Ŷ269B
Ɣ220B
Ŷ449B
Ŷ400B
Ŷ400B
Ŷ390B
Ŷ361B
Ŷ298B
Ŷ325B
Ŷ298B
Ŷ298B
Ŷ276B
Ŷ226B
Ɣ180B
Ŷ361B
Ŷ341B
Ŷ341B
Ŷ315B
Ŷ269B
Ɣ220B
Ŷ400B
Ŷ374B
Ŷ374B
Ŷ351B
Ŷ325B
Ɣ249B
Ŷ351A
Ŷ276A
Ŷ200A
Ŷ164A
Ŷ699B
Ŷ649B
Ŷ649B
Ŷ430B
Ŷ259B
Ɣ230B
Ɣ200B
Ɣ266B
Ɣ200A
Ɣ131A
Ŷ239A
Ŷ171A
Ŷ131A
Ŷ98A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ŷ276A
Ŷ200A
Ŷ151A
Ŷ115A
Ŷ351A
Ŷ276A
Ŷ200A
Ŷ148A
Ŷ699B
Ŷ649B
Ŷ649B
Ŷ430B
Ŷ259B
Ɣ230B
Ɣ200B
Ɣ266B
Ɣ200A
Ɣ131A
Ŷ239A
Ŷ171A
Ŷ131A
Ŷ98A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ŷ276A
Ŷ200A
Ŷ151A
Ŷ115A
Ŷ239A
Ŷ171A
Ŷ131A
Ŷ105A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ŷ239A
Ŷ171A
Ŷ131A
Ŷ89A
Ŷ449B
Ɣ377B
Ŷ377B
Ɣ279B
Ŷ200A
Ŷ141A
Ŷ115A
Ŷ89A
Ŷ361B
Ɣ298B
Ŷ298B
Ɣ230B
Ŷ239A
Ŷ161A
Ŷ131A
Ŷ89A
Ŷ325A
Ŷ226A
Ŷ164A
Ŷ115A
Ŷ600B
Ŷ508B
Ŷ508B
Ŷ400B
Ɣ230B
Ɣ210B
Ɣ180B
Ɣ236B
Ɣ180A
Ɣ115A
Ŷ200A
Ŷ141A
Ŷ115A
Ŷ239A
Ŷ161A
Ŷ131A
Ŷ105A
Ŷ226A
Ŷ190A
Ŷ151A
Ŷ121A
Ŷ499B
Ŷ430B
Ŷ430B
Ɣ338B
Ɣ200B
Ɣ190B
381
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
382
383
Ɣ210B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
384
385
386
Ɣ210B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
Ɣ200B
Ɣ187B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
Ŷ613C
Ŷ518C
Ŷ518C
Ɣ131B
Ɣ1450C
Ɣ1450C
Ɣ640C
Ɣ430B
Ŷ361B
Ɣ298B
Ŷ298B
Ɣ230B
389
390
390
Ŷ279U
Ŷ230U
Ŷ230U
Ŷ164T
Ŷ148S
Ŷ131S
Ɣ246V
Ɣ246V
Ɣ180V
Ɣ180V
Ɣ131T
Ɣ131T
Ɣ82T
Ɣ210B
Ɣ72T
Ɣ46S
Ŷ613C
Ŷ518C
Ŷ518C
Ɣ131B
Ɣ1450C
Ɣ1450C
Ɣ640C
Ɣ430B
Ɣ699C
Ɣ571C
Ɣ571C
Ɣ180B
Ŷ1650C
Ŷ1650C
Ŷ708C
Ŷ410B
Ŷ230W
Ɣ656X
Ŷ367X
Ŷ197X
Ŷ105U
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
353
E3603 - E3603G
Ɣ End Mill
Ɣ 3-flute, 60° high helix
Ɣ Fraises de finition
Ɣ Fresas de acabado
E3603
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
5/8
5/8
3/4
13/16
1“
1“
1“
1.1/4
1.1/2
1.1/2
Inch
1.1/2
2“
2.1/2
2.1/2
2.1/2
3“
3“
3.1/2
4“
4“
# Flutes
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
005802
005804
005807
005808
005810
005812
005814
005815
005817
005820
E3603G
Ɣ End Mill
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
354
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1/2
5/8
3/4
13/16
1“
1“
1“
1.1/4
1.1/2
1.1/2
Inch
1.1/2
2“
2.1/2
2.1/2
2.1/2
3“
3“
3.1/2
4“
4“
# Flutes
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
005902
005904
005907
005908
005910
005912
005914
005915
005917
005920
E3603V - E1302
Ɣ End Mill
Fraises de finition
E3603V
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1/2
5/8
3/4
13/16
1“
1“
1“
1.1/4
1.1/2
1.1/2
Inch
1.1/2
2“
2.1/2
2.1/2
2.1/2
3“
3“
3.1/2
4“
4“
# Flutes
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
002780
002781
002782
002783
002784
002785
002786
002787
002788
002789
E1302
Ɣ End Mill
Ɣ 2-flute, stub length
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2“
2“
2.1/2
2.1/2
# Flutes
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
001802
001804
001806
001808
001810
001811
001812
001813
001814
001815
001816
355
E1302G - E1302V
Ɣ End Mill
E1302G
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2“
2“
2.1/2
2.1/2
# Flutes
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
006802
006804
006806
006808
006810
006811
006812
006813
006814
006815
006816
E1302V
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
356
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2“
2“
2.1/2
2.1/2
# Flutes
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
002735
002736
002737
002738
002739
002740
002741
002742
002743
002744
002745
E2302 - E3302
Ɣ End Mill, double-end
Ɣ Fraises de finition - Double
Ɣ Fresas de acabado - Doble final
E2302
Ŷ
Ɣ
d1
Ø Inch
d1 decimal
Inch
d2
Ø Inch
l2
Inch
l1
Inch
# Flutes
EDP # or
e-Code
1/16
3/32
1/8
3/16
1/4
5/16
3/8
1/2
0.0625
0.0938
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
1/8
1/8
1/8
3/16
1/4
5/16
3/8
1/2
1/8
3/16
1/4
3/8
1/2
1/2
1/2
5/8
1.1/2
1.1/2
1.1/2
2“
2.1/2
2.1/2
2.1/2
3“
2
2
2
2
2
2
2
2
002002
002003
002004
002006
002008
002009
002010
002012
Ɣ End Mill
Ɣ 2-flute, regular length
E3302
Ŷ
Ɣ
d1
Ø Inch
d1 decimal
Inch
d2
Ø Inch
l2
Inch
l1
Inch
# Flutes
EDP # or
e-Code
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
001000
001001
001002
001003
001004
001005
001006
001007
001008
001009
001010
001011
001012
001016
001017
001018
001019
001020
001021
001022
001023
001024
001025
357
E3302G
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
358
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
005100
005101
005102
005103
005104
005105
005106
005107
005108
005109
005110
005111
005112
005116
005117
005118
005119
005120
005121
005122
005123
005124
005125
E3302V
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
002850
002851
002852
002853
002854
002855
002856
002857
002858
002859
002860
002861
002862
002863
002864
002865
002866
002867
002868
002869
002870
002871
002872
359
E3302M
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
360
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
6.0
12.0
14.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
001028
001029
001030
001031
001032
001033
001034
001035
001036
001037
001038
001039
001040
001041
001043
001044
001045
001046
001047
E3302MG
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
6.0
12.0
14.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
005128
005129
005130
005131
005132
005133
005134
005135
005136
005137
005138
005139
005140
005141
005143
005144
005145
005146
005147
361
E3302MV
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
362
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
6.0
12.0
14.0
14.0
14.0
16.0
19.0
19.0
20.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
73.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
004275
004276
004277
004278
004279
004280
004281
004282
004283
004284
004285
004286
004287
004288
004289
004290
004291
004292
004293
EB3302
Ɣ End Mill
Ɣ 2-flute, ball nose, regular length
Ɣ Fraises de finition bout hémisphérique
Ɣ Fresas con punta esferica
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
001200
001201
001202
001203
001204
001205
001206
001207
001208
001209
001210
001211
001212
001216
001217
001218
001219
001220
001221
001222
001223
001224
001225
363
EB3302G
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
364
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
002570
002571
002572
002573
002574
002575
002576
002577
002578
002579
002580
002581
002582
002583
002584
002585
002586
002587
002588
002589
002590
002591
002592
EB3302V
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
002630
002631
002632
002633
002634
002635
002636
002637
002638
002639
002640
002641
002642
002643
002644
002645
002646
002647
002648
002649
002650
002651
002652
365
EB3302M
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
366
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
001228
001229
001230
001231
001232
001233
001234
001235
001236
001237
001238
001239
001240
001241
001242
001243
001244
001245
001246
EB3302MG
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
004350
004351
004352
004353
004354
004355
004356
004357
004358
004359
004360
004361
004362
004363
004364
004365
004366
004367
004368
367
EB3302MV - E4302
Ɣ End Mill
EB3302MV
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
Ɣ End Mill
Ɣ 2-flute, double end, regular length
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
004400
004401
004402
004403
004404
004405
004406
004407
004408
004409
004410
004411
004412
004413
004414
004415
004416
004417
004418
E4302
Ŷ
Ɣ
d1
Ø
mm
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
368
d1
decimal
Inch
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
mm
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
1/2
l2
l1
mm
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
mm
3“
3“
3“
3“
3“
3.1/2
3.1/2
4“
4“
# Flutes
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
002200
002201
002202
002203
002204
002206
002208
002209
002210
EB4302 - E6302
Ɣ End Mill
Ɣ 2-flute, ball nose, double end,
regular length
Ɣ Fraises de finition bout hémisphérique Double
Ɣ Fresas con punta esferica - Doble final
EB4302
Ŷ
Ɣ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
1/2
l2
l1
Inch
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
Inch
3“
3“
3“
3“
3“
3.1/2
3.1/2
4“
4“
# Flutes
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
002300
002301
002302
002303
002304
002306
002308
002309
002310
E6302
Ɣ End Mill
Ɣ 2-Flute, Extra Length
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
# Flutes
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
004800
004801
004802
004803
004804
004805
004806
004807
004808
004809
369
E6302G - E6302V
Ɣ End Mill
Ɣ 2-flute, extra length
E6302G
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
# Flutes
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
003100
003101
003102
003103
003104
003105
003106
003107
003108
003109
# Flutes
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
003130
003131
003132
003133
003134
003135
003136
003137
003138
003139
E6302V
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
370
EB6302 - EB6302G
Ɣ End Mill,
Ɣ 2-flute, ball nose, extra length
EB6302
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
# Flutes
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
005400
005401
005402
005403
005404
005405
005406
005407
005408
005409
# Flutes
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
003670
003671
003672
003673
003674
003675
003676
003677
003678
003679
EB6302G
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
371
EB6302V - E3303
Ɣ End Mill
EB6302V
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
# Flutes
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
003700
003701
003702
003703
003704
003705
003706
003707
003708
003709
E3303
Ɣ End Mill
Ɣ 3-flute, standard length
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
372
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/4
3/8
1/2
9/16
5/8
5/8
3/4
7/8
7/8
1“
1“
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
# Flutes
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
001050
001052
001054
001056
001058
001060
001062
001066
001067
001068
001069
E3303G - E3303V
Ɣ End Mill
E3303G
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/4
3/8
1/2
9/16
5/8
5/8
3/4
7/8
7/8
1“
1“
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
# Flutes
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
002880
002881
002882
002883
002884
002885
002886
002887
002888
002889
002890
# Flutes
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
002920
002921
002922
002923
002924
002925
002926
002927
002928
002929
002930
E3303V
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/4
3/8
1/2
9/16
5/8
5/8
3/4
7/8
7/8
1“
1“
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
373
E1304 - E1304G
Ɣ End Mill
Ɣ Fraises definition
E1304
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2“
2“
2.1/2
2.1/2
# Flutes
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
001852
001854
001856
001858
001860
001861
001862
001863
001864
001865
001866
# Flutes
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
006852
006854
006856
006858
006860
006861
006862
006863
006864
006865
006866
E1304G
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
374
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2“
2“
2.1/2
2.1/2
E1304V - E2304
Ɣ End Mill
E1304V
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
3/8
7/16
1/2
l2
l1
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
5/8
5/8
5/8
Inch
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2“
2“
2.1/2
2.1/2
# Flutes
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
002765
002766
002767
002768
002769
002770
002771
002772
002773
002774
002775
E2304
Ɣ End Mill
Ɣ 4-flute, double end, stub length
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
3/16
1/4
5/16
3/8
1/2
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
d2
Ø
Inch
1/8
1/8
1/8
3/16
1/4
5/16
3/8
1/2
l2
l1
Inch
1/8
3/16
1/4
3/8
1/2
1/2
1/2
5/8
Inch
1.1/2
1.1/2
1.1/2
2“
2.1/2
2.1/2
2.1/2
3“
# Flutes
4
4
4
4
4
4
4
4
EDP #
or
e-Code
002052
002053
002054
002056
002058
002059
002060
002062
375
E3304
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
376
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
001100
001101
001102
001103
001104
001105
001106
001107
001108
001109
001110
001111
001112
001116
001117
001118
001119
001120
001121
001122
001123
001124
001125
E3304G
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
005300
005301
005302
005303
005304
005305
005306
005307
005308
005309
005310
005311
005312
005316
005317
005318
005319
005320
005321
005322
005323
005324
005325
377
E3304V
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
378
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
002690
002691
002692
002693
002694
002695
002696
002697
002698
002699
002700
002701
002702
002703
002704
002705
002706
002707
002708
002709
002710
002711
002712
E3304M
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
001128
001129
001130
001131
001132
001133
001134
001135
001136
001137
001138
001139
001140
001141
001143
001144
001145
001146
001147
379
E3304MG
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
380
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
005328
005329
005330
005331
005332
005333
005334
005335
005336
005337
005338
005339
005340
005341
005343
005344
005345
005346
005347
E3304MV
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
004325
004326
004327
004328
004329
004330
004331
004332
004333
004334
004335
004336
004337
004338
004339
004340
004341
004342
004343
381
EB3304
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
382
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
001300
001301
001302
001303
001304
001305
001306
001307
001308
001309
001310
001311
001312
001316
001317
001318
001319
001320
001321
001322
001323
001324
001325
EB3304G
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
Inch
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
Inch
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
003010
003011
003012
003013
003014
003015
003016
003017
003018
003019
003020
003021
003022
003023
003024
003025
003026
003027
003028
003029
003030
003031
003032
383
EB3304V - EB3304MV
Ɣ End Mill
EB3304V
Ŷ
Ɣ
d1
Ø
mm
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1“
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
d2
Ø
mm
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
l2
l1
mm
1/4
1/4
3/8
3/8
1/2
9/16
9/16
9/16
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
mm
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2“
2“
2“
2“
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3.1/2
3.1/2
4“
4“
4“
4“
l1
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
003070
003071
003072
003073
003074
003075
003076
003077
003078
003079
003080
003081
003082
003083
003084
003085
003086
003087
003088
003089
003090
003091
003092
EB3304MV
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
mm
# Flutes
EDP #
or
e-Code
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
004750
004751
004752
004753
004754
004755
004756
004757
004758
004759
004760
004761
004762
004763
004764
004765
004766
004767
004768
384
EB3304M
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
001344
001343
001342
001341
001340
001339
001338
001337
001336
001335
001334
001333
001332
001331
001330
001329
001328
001327
001326
385
EB3304MG - E4304
Ɣ End Mill
EB3304MG
Ɣ
Ŷ
d1
Ø
mm
2.00
2.50
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
14.00
16.00
18.00
20.00
25.00
d1
decimal
Inch
0.0787
0.0984
0.1181
0.1378
0.1575
0.1772
0.1969
0.2362
0.2756
0.3150
0.3543
0.3937
0.4331
0.4724
0.5512
0.6299
0.7087
0.7874
0.9843
d2
Ø
mm
3.0
3.0
3.0
4.0
4.0
5.0
5.0
6.0
8.0
8.0
10.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
25.0
l2
l1
mm
6.0
7.0
12.0
12.0
14.0
14.0
16.0
19.0
19.0
19.0
22.0
22.0
25.0
25.0
30.0
32.0
36.0
38.0
38.0
mm
38.0
38.0
38.0
50.0
50.0
50.0
50.0
63.0
63.0
63.0
70.0
70.0
70.0
75.0
88.0
88.0
100.0
100.0
100.0
l1
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
004640
004641
004642
004643
004644
004645
004646
004647
004648
004649
004650
004651
004652
004653
004654
004655
004656
004657
004658
E4304
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
mm
# Flutes
EDP #
or
e-Code
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
1/2
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
3“
3“
3“
3“
3“
3.1/2
3.1/2
4“
4“
4
4
4
4
4
4
4
4
4
002250
002251
002252
002253
002254
002256
002258
002259
002260
386
EB4304 - E6304
Ɣ End Mill
regular length
EB4304
Ŷ
Ɣ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
d1
decimal
Inch
0.1250
0.1562
0.1875
0.2188
0.2500
0.3125
0.3750
0.4375
0.5000
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
1/2
l2
l1
Inch
3/8
7/16
1/2
9/16
5/8
3/4
3/4
7/8
1“
Inch
3“
3“
3“
3“
3“
3.1/2
3.1/2
4“
4“
EDP #
or
e-Code
002350
002351
002352
002353
002354
002356
002358
002359
002360
# Flutes
4
4
4
4
4
4
4
4
4
E6304
Ɣ End Mill
Ɣ
Fresas de acabado
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
# Flutes
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
004900
004901
004902
004903
004904
004905
004906
004907
004908
004909
387
E6304G - E6304V
Ɣ End Mill
E6304G
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
# Flutes
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
003285
003286
003287
003288
003289
003290
003291
003292
003293
003294
# Flutes
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
003165
003166
003167
003168
003169
003170
003171
003172
003173
003174
E6304V
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
388
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
EB6304 - EB6304G
Ɣ End Mill
EB6304
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
# Flutes
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
005700
005701
005702
005703
005704
005705
005706
005707
005708
005709
# Flutes
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
003715
003716
003717
003718
003719
003720
003721
003722
003723
003724
EB6304G
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
389
EB6304V - RTDA
Ɣ End Mill
EB6304V
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
d2
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
l2
l1
Inch
1“
1.1/8
1.1/2
1.5/8
1.3/4
3“
3“
3“
3“
3“
Inch
3“
3“
4“
4“
4“
6“
6“
6“
6“
6“
EDP #
or
e-Code
003745
003746
003747
003748
003749
003750
003751
003752
003753
003754
# Flutes
4
4
4
4
4
4
4
4
4
4
RTDA
Ɣ Router
d1
Ø
Inch
1/8
1/8
3/16
3/16
3/16
3/16
390
d1
dec.
type
Inch
Coarse 0.1250
Medium 0.1250
Coarse 0.1875
Coarse 0.1875
Medium 0.1875
Medium 0.1875
d2
Ø
Inch
1/8
1/8
3/16
1/4
3/16
1/4
l2
Inch
1/2
1/2
5/8
5/8
5/8
5/8
l1
Inch
1.1/2
1.1/2
2“
2“
2“
2“
EDP #
or
e-Code
002505
002506
002507
002508
002509
002510
d1
Ø
Inch
1/4
1/4
1/4
1/4
5/16
3/8
1/2
d1
dec.
type
Inch
Coarse 0.2500
Fine
0.2500
Coarse 0.2500
Fine
0.2500
Medium 0.3125
Medium 0.3750
Medium 0.5000
d2
Ø
Inch
1/4
1/4
1/4
1/4
5/16
3/8
1/2
l2
Inch
3/4
3/4
1“
1“
1“
1“
1“
l1
Inch
2“
2“
3“
3“
2.1/2
2.1/2
3“
EDP #
or
e-Code
002511
002512
002513
002514
002515
002516
002517
HSS End Mill Table of Contents
Style
Description
#Flutes
Finish
9002
TN9002
TC9002
9008
TN9008
TC9008
9003
TN9003
TC9003
9009
TN9009
TC9009
9004
963
960
961
962
920
920K
TN920
905
921
TN921
922
980
981
982
923
TN923
907
930
931
933
940
TN940
941
944
945
TN945
900
946
TN946
901
947
943
TN943
948
TN948
911
917
919
883
C191
C192
C291
C292
C391
C392
Rougher, Multi-Flute
Rougher, Multi Flute
Regular Length
Regular Length, Multi-Flute
Regular Length, Multi-Flute
Extra Length
Regular Length
Keyway, Regular Length
Regular Length
Long Length
Long Length
Long Length
Regular Length
Long Length
Extra Length
Regular Length
Regular Length
Regular Length
Long Length
Regular Length
Regular Length
Regular Length
Long Length
Extra Length
Regular Length
Regular Length
Long Length
Long Length
Ball Nose, Long Length
Extra Length
Miniature, Double End
Corner Rounding Cutter
Slot Drill, Stub Length
Slot Drill, Stub Length
Regular Length
Long Length
Slot Drill, Standard Length
Slot Drill, Long Length
4-8
4-8
4-8
4-8
4-8
4-8
4-8
4-8
4-8
4-8
4-8
4-8
3-6
2
4-6
4-6
4
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2
4
4
N/A
2
2
2-8
2-6
3
3
HSCo, Bright
HSCo, TiN
HSCo, TiCN
HSCo, Bright
HSCo, TiN
HSCo, TiCN
HSCo, Bright
HSCo, TiN
HSCo, TiCN
HSCo, Bright
HSCo, TiN
HSCo, TiCN
HSCo, Bright
HSCo, Bright
HSCo, Bright
HSCo, Bright
HSCo, Bright
HSS, Bright
HSS, Bright
HSS, TiN
HSS, Bright
HSS, Bright
HSS, TiN
HSS, Bright
HSS, Bright
HSS, Bright
HSS, Bright
HSS, Bright
HSS, TiN
HSS, Bright
HSS, Bright
HSS, Bright
HSS, Bright
HSS, Bright
HSS, TiN
HSS, Bright
HSS, Bright
HSS, Bright
HSS, TiN
HSS, Bright
HSS, Bright
HSS, TiN
HSS, Bright
HSS, Bright
HSS, Bright
HSS, TiN
HSS, Bright
HSS, TiN
HSS, Bright
HSS, Bright
HSS, Bright
HSS, Bright
HSCo, Bronze
HSCo, Bronze
HSCo, Bronze
HSCo, Bronze
HSCo, Bronze
HSCo, Bronze
Page No.
400
400
401
402
402
403
403
404
404
405
405
406
406
407
407
408
408
409
410
411
412
412
413
413
414
414
415
415
416
416
417
418
418
419
420
421
421
422
422
423
423
424
424
425
425
426
427
427
428
428
429
429
430
432
433
435
436
436
391
HSS End Mill - Feed Rate Chart
Feed per Tooth (Ft) Dia Inches
Type of
Type of
Cut
Cut
Ľ 0,5D
ļD
ĽD
ļ 0,8D
Ľ 1,5D
ļ 0,25D
Alpha
Alpha 0.078
1/8
5/32
3/16
1/4
5/16 13/32
1/2
9/16
5/8 11/16
3/4
Code
Code
0.0003
0.0005
0.0007
0.0009
0.0011
0.0017
0.0024
0.0028
0.0033
0.0038
0.0038
0.0038
A
1.1/4
1.1/2
0.0039 0.0041
7/8
1”
0.0042
0.0043
B
0.0003 0.0005 0.0006 0.0009 0.0010 0.0015
0.0021 0.0026 0.0030 0.0034 0.0034 0.0034
0.0035 0.0037
0.0037
0.0038
C
0.0003 0.0004 0.0006 0.0007 0.0009 0.0014
0.0019 0.0023 0.0027 0.0031 0.0031 0.0031
0.0031 0.0033
0.0034
0.0034
D
0.0003 0.0004 0.0006 0.0008 0.0009 0.0015
0.0020 0.0024 0.0028 0.0032 0.0032 0.0032
0.0033 0.0035
0.0038
0.0040
E
0.0005 0.0007 0.0009 0.0014 0.0017 0.0025 0.0034 0.0041 0.0048 0.0055 0.0056 0.0006
0.0057 0.0060
0.0066
0.0069
F
0.0004 0.0005 0.0007 0.0008 0.0010 0.0013
0.0016 0.0020 0.0022 0.0025 0.0028 0.0031
0.0031 0.0033
0.0033
0.0033
G
0.0010 0.0013
0.0014 0.0017 0.0020 0.0022 0.0025 0.0028
0.0028 0.0021
0.0021
0.0022
0.0020
H
0.0009 0.0012
0.0013 0.0015 0.0018 0.0020 0.0023 0.0025
0.0021 0.0019
0.0019
I
0.0008 0.0011
0.0011 0.0014 0.0016 0.0018 0.0020 0.0023
0.0023 0.0017
0.0017
0.0018
J
0.0009 0.0012
0.0013 0.0015 0.0018 0.0020 0.0023 0.0026
0.0026 0.0019
0.0019
0.0020
K
0.0014 0.0019
0.0026 0.0031 0.0036 0.0059 0.0035 0.0039
0.0038 0.0043
0.0043
0.0046
0.0004 0.0005 0.0007 0.0008 0.0010 0.0011 0.0012 0.0013
0.0013 0.0013
0.0015
0.0017
0.0042
L
M
0.0003 0.0005 0.0007 0.0009 0.0012 0.0016
0.0022 0.0027 0.0031 0.0036 0.0041 0.0045
0.0035 0.0041 0.0038
N
0.0003 0.0004 0.0006 0.0008 0.0011 0.0015
0.0020 0.0024 0.0028 0.0032 0.0037 0.0041
0.0024 0.0037 0.0034
0.0038
O
0.0002 0.0004 0.0006 0.0007 0.0010 0.0013
0.0018 0.0022 0.0026 0.0029 0.0033 0.0036
0.0029 0.0033 0.0031
0.0034
P
0.0003 0.0004 0.0006 0.0008 0.0011 0.0014
0.0019 0.0023 0.0027 0.0031 0.0015 0.0039
0.0031 0.0035 0.0033
0.0036
Q
0.0004 0.0006 0.0008 0.0010 0.0015 0.0019
0.0026 0.0031 0.0036 0.0041 0.0035 0.0039
0.0039 0.0044 0.0050
0.0055
R
0.0005 0.0006 0.0008 0.0010 0.0011 0.0015
0.0019 0.0022 0.0026 0.0029 0.0033 0.0036
0.0036 0.0036 0.0041
0.0043
S
0.0004 0.0006 0.0009 0.0011 0.0015 0.0020 0.0028 0.0034 0.0039 0.0045 0.0051 0.0056
0.0044 0.0051 0.0048
0.0052
T
0.0004 0.0006 0.0008 0.0010 0.0014 0.0018
0.0025 0.0030 0.0035 0.0051 0.0046 0.0051
0.0040 0.0046 0.0043
0.0047
U
0.0003 0.0005 0.0007 0.0009 0.0013 0.0016
0.0023 0.0028 0.0032 0.0036 0.0041 0.0046
0.0036 0.0041 0.0039
0.0043
V
0.0004 0.0005 0.0008 0.0010 0.0013 0.0017
0.0024 0.0029 0.0034 0.0039 0.0043 0.0048
0.0038 0.0043 0.0041
0.0045
Ľ 1,5D
X
0.0005 0.0007 0.0010 0.0013 0.0018 0.0023 0.0032 0.0039 0.0045 0.0052 0.0044 0.0049
0.0048 0.0055 0.0062
0.0068
ļ 0,1D
Y
0.0006 0.0008 0.0010 0.0012 0.0014 0.0019
0.0045 0.0045 0.0051
0.0054
RPM = SFM/D x 3.82
F = Ft x T x RPM
RPM = [(m/min.) x 1000] ÷ (3.14 x D)
392
0.0023 0.0028 0.0024 0.0036 0.0041 0.0045
Terms: RPM = Revolutions Per Minute F = Feed Inches Per Minute
Ft = Feed Per Tooth T = Number of Teeth D = Cutting Dia.
HSS End Mill - Feed Rate Chart
Feed per Tooth (Ft) Dia MM
Type of
Cut
Alpha
Code
1
2
3
4
5
6
8
10
12
14
16
18
20
22
25
28
30
32
36
40
50
A
0,004 0,008 0,013 0,017 0,024 0,029 0,043 0,060 0,072 0,084 0,096 0,097 0,096 0,099 0,105 0,109 0,108 0,106 0,108 0,108 0,105
B
0,004 0,007 0,012 0,015 0,022 0,026 0,039 0,054 0,065 0,076 0,086 0,087 0,086 0,089 0,095 0,098 0,097 0,095 0,097 0,097 0,095
C
0,003 0,006 0,011 0,014 0,019 0,023 0,035 0,049 0,058 0,068 0,078 0,079 0,078 0,080 0,085 0,088 0,087 0,086 0,087 0,087 0,085
D
0,004 0,007 0,011 0,014 0,020 0,024 0,037 0,051 0,061 0,071 0,081 0,082 0,081 0,084 0,089 0,099 0,091 0,097 0,091 0,101 0,101
Ľ 0,5D
E
0,007 0,012 0,018 0,024 0,035 0,042 0,063 0,087 0,105 0,122 0,140 0,141 0,140 0,144 0,153 0,171 0,157 0,168 0,157 0,175 0,175
ļD
F
0,007 0,009 0,013 0,018 0,021 0,025 0,033 0,041 0,050 0,055 0,064 0,072 0,079 0,079 0,085 0,085 0,085 0,085 0,085 0,085 0,085
G
0,026 0,034 0,036 0,043 0,050 0,057 0,064 0,071 0,071 0,054 0,053 0,054 0,053 0,056 0,057 0,060
H
0,023 0,031 0,032 0,039 0,045 0,051 0,058 0,064 0,064 0,049 0,048 0,049 0,048 0,050 0,051 0,054
ĽD
ļ 0,8D
I
0,021 0,028 0,029 0,035 0,041 0,046 0,052 0,058 0,058 0,044 0,043 0,044 0,043 0,045 0,046 0,049
J
0,024 0,031 0,033 0,039 0,046 0,052 0,059 0,065 0,065 0,049 0,049 0,049 0,049 0,051 0,052 0,055
K
0,035 0,047 0,065 0,079 0,092 0,105 0,088 0,098 0,097 0,110 0,110 0,110 0,110 0,115 0,118 0,123
L
0,010 0,013 0,017 0,020 0,025 0,028 0,030 0,032 0,033 0,034 0,036 0,038 0,039 0,040 0,042 0,042
M
0,008 0,012 0,018 0,023 0,031 0,041 0,057 0,069 0,080 0,091 0,103 0,114 0,090 0,103 0,085 0,091 0,097 0,110 0,107 0,086
N
0,007 0,011 0,016 0,021 0,028 0,037 0,051 0,062 0,072 0,082 0,093 0,103 0,081 0,093 0,077 0,082 0,087 0,099 0,096 0,077
O
0,006 0,010 0,015 0,019 0,025 0,033 0,046 0,056 0,065 0,074 0,083 0,092 0,073 0,083 0,069 0,074 0,079 0,089 0,087 0,070
Ľ 1,5D
P
0,007 0,010 0,016 0,020 0,027 0,035 0,049 0,059 0,069 0,079 0,088 0,098 0,078 0,088 0,073 0,079 0,084 0,094 0,092 0,074
ļ 0,25D
Q
0,009 0,014 0,021 0,026 0,036 0,048 0,066 0,079 0,092 0,106 0,089 0,099 0,098 0,111 0,111 0,119 0,127 0,143 0,139 0,148
Ľ 1,5D
ļ 0,1D
R
0,012 0,016 0,020 0,025 0,029 0,038 0,047 0,056 0,065 0,073 0,083 0,092 0,092 0,092 0,092 0,092 0,104 0,104 0,108 0,108
S
0,010 0,015 0,023 0,029 0,039 0,051 0,071 0,086 0,100 0,114 0,129 0,143 0,113 0,129 0,107 0,114 0,122 0,137 0,133 0,107
T
0,009 0,014 0,021 0,026 0,035 0,046 0,064 0,077 0,090 0,103 0,116 0,129 0,102 0,116 0,096 0,103 0,110 0,123 0,120 0,096
U
0,008 0,012 0,019 0,023 0,032 0,041 0,058 0,070 0,081 0,092 0,104 0,116 0,092 0,104 0,087 0,092 0,099 0,111 0,108 0,087
V
0,009 0,013 0,020 0,025 0,033 0,044 0,061 0,074 0,086 0,098 0,110 0,123 0,097 0,110 0,092 0,098 0,105 0,118 0,115 0,092
X
0,012 0,017 0,026 0,033 0,045 0,059 0,082 0,099 0,115 0,132 0,111 0,124 0,122 0,139 0,139 0,148 0,158 0,178 0,173 0,186
Y
0,015 0,020 0,025 0,031 0,036 0,047 0,059 0,070 0,081 0,092 0,104 0,115 0,115 0,115 0,115 0,115 0,130 0,130 0,136 0,136
RPM = SFM/D x 3.82
F = Ft x T x RPM
RPM = [(m/min.) x 1000] ÷ (3.14 x D)
Terms: RPM = Revolutions Per Minute F = Feed Inches Per Minute
Ft = Feed Per Tooth T = Number of Teeth D = Cutting Dia.
393
HSS End Mills
Style:
Flutes:
9002
TN9002
TC9002
MultiFlute
MultiFlute
MultiFlute
AMG Chart below.
example:
289 B
289 = SFM
4
Ŷ
Ɣ
Material:
Icon Guide for HSS End Mills
Finish/Coating:
Standard:
Weldon
Shank
Straight
Shank
2
Type of Cut:
Tool Length:
Shank:
Slotting
Ball Nose Roughing Finishing
Corner
Rounding
Tolerance:
End Grind:
Helix Angle:
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
394
HSS End Mills
Axial Direction:
Helix
Angle
Slotting, Slotting, Finishing
Ramping, Ramping
Diving
3
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
400
400
401
Ɣ164G
Ŷ131G
Ŷ115H
Ɣ98H
Ɣ197G
Ŷ157G
Ŷ138H
Ɣ118H
Ɣ197G
Ŷ184G
Ŷ161H
Ɣ138H
Ɣ75L
Ɣ92L
Ɣ105L
Ɣ92G
Ɣ75G
Ɣ131H
Ɣ82H
Ɣ92J
Ɣ75J
Ɣ112G
Ɣ92G
Ɣ157H
Ɣ98H
Ɣ112J
Ɣ92J
Ɣ128G
Ɣ105G
Ɣ184H
Ɣ128H
Ɣ128J
Ɣ105J
Ɣ157J
Ɣ43I
Ɣ187J
Ɣ49I
Ɣ220J
Ɣ59I
Ɣ410I
Ŷ410I
Ŷ410I
Ɣ492I
Ŷ492I
Ŷ492I
Ɣ574I
Ŷ574I
Ŷ574I
Ɣ984K
Ɣ295K
Ɣ1181K
Ɣ354K
Ɣ1378K
Ɣ413K
Ɣ410I
Ɣ492I
Ɣ574I
HSS End Mills (con‘t)
TN9008
TC9008
9003
TN9003
TC9003
9009
TN9009
TC9009
9004
963
960
961
962
MultiFlute
MultiFlute
MultiFlute
MultiFlute
MultiFlute
MultiFlute
MultiFlute
MultiFlute
MultiFlute
2-Flute
MultiFlute
MultiFlute
4-Flute
402
402
403
403
404
404
405
405
406
406
Ɣ148G
Ŷ118G
Ŷ102H
Ɣ89H
Ɣ197G
Ŷ157G
Ŷ138H
Ɣ118H
Ɣ197G
Ŷ184G
Ŷ161H
Ɣ138H
Ɣ164G
Ŷ131G
Ŷ115H
Ɣ98H
Ɣ197G
Ŷ157G
Ŷ138H
Ɣ118H
HSS End Mills
9008
MultiFlute
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ɣ197G
Ŷ184G
Ŷ161H
Ɣ138H
Ɣ148G
Ŷ118G
Ŷ102H
Ɣ89H
Ɣ197G
Ŷ157G
Ŷ138H
Ɣ118H
Ɣ197G
Ŷ184G
Ŷ161H
Ɣ138H
Ɣ164G
Ŷ131G
Ŷ115H
Ɣ98H
407
Ŷ164A
Ŷ131A
Ɣ115B
Ɣ98B
407
408
408
Ŷ164S
Ŷ131S
Ŷ115T
Ɣ98T
Ŷ148S
Ŷ118S
Ŷ102T
Ɣ89T
Ŷ148S
Ŷ118S
Ŷ102T
Ɣ89T
Ɣ75Y
Ɣ66Y
Ɣ66Y
Ɣ82G
Ɣ66G
Ɣ118H
Ɣ72H
Ɣ82J
Ɣ66J
Ɣ112G
Ɣ92G
Ɣ157H
Ɣ98H
Ɣ112J
Ɣ92J
Ɣ128G
Ɣ105G
Ɣ184H
Ɣ128H
Ɣ128J
Ɣ105J
Ɣ92G
Ɣ75G
Ɣ131H
Ɣ82H
Ɣ92J
Ɣ75J
Ɣ112G
Ɣ92G
Ɣ157H
Ɣ98H
Ɣ112J
Ɣ92J
Ɣ128G
Ɣ105G
Ɣ184H
Ɣ128H
Ɣ128J
Ɣ105J
Ɣ82G
Ɣ66G
Ɣ118H
Ɣ72H
Ɣ82J
Ɣ66J
Ɣ112G
Ɣ92G
Ɣ157H
Ɣ98H
Ɣ112J
Ɣ92J
Ɣ128G
Ɣ105G
Ɣ184H
Ɣ128H
Ɣ128J
Ɣ105J
Ɣ92G
Ɣ75G
Ɣ131H
Ɣ82H
Ɣ92J
Ɣ75J
Ɣ92A
Ɣ75A
Ɣ131B
Ɣ82B
Ɣ92D
Ɣ75D
Ɣ92S
Ɣ75S
Ɣ131T
Ɣ82T
Ŷ92V
Ɣ75V
Ɣ82S
Ɣ66S
Ɣ118T
Ɣ72T
Ŷ82V
Ɣ66V
Ɣ82S
Ɣ66S
Ɣ118T
Ɣ72T
Ŷ82V
Ɣ66V
Ɣ141J
Ɣ36I
Ɣ187J
Ɣ49I
Ɣ220J
Ɣ59I
Ɣ157J
Ɣ43I
Ɣ187J
Ɣ49I
Ɣ220J
Ɣ59I
Ɣ141J
Ɣ36I
Ɣ187J
Ɣ49I
Ɣ220J
Ɣ59I
Ɣ157J
Ɣ43I
Ŷ157D
Ɣ43C
Ŷ157V
Ɣ43U
Ŷ141V
Ɣ36U
Ŷ141V
Ɣ36U
Ɣ367I
Ŷ367I
Ŷ367I
Ɣ492I
Ŷ492I
Ŷ492I
Ɣ574I
Ŷ574I
Ŷ574I
Ɣ410I
Ŷ410I
Ŷ410I
Ɣ492I
Ŷ492I
Ŷ492I
Ɣ574I
Ŷ574I
Ŷ574I
Ɣ367I
Ŷ367I
Ŷ367I
Ɣ492I
Ŷ492I
Ŷ492I
Ɣ574I
Ŷ574I
Ŷ574I
Ɣ410I
Ŷ410I
Ŷ410I
Ŷ410C
Ŷ410C
Ŷ410C
Ŷ410U
Ŷ410U
Ŷ410U
Ŷ367U
Ŷ367U
Ŷ367U
Ŷ367U
Ŷ367U
Ŷ367U
Ɣ886K
Ɣ266K
Ɣ1181K
Ɣ354K
Ɣ1378K
Ɣ413K
Ɣ984K
Ɣ295K
Ɣ1181K
Ɣ354K
Ɣ1378K
Ɣ413K
Ɣ886K
Ɣ266K
Ɣ1181K
Ɣ354K
Ɣ1378K
Ɣ413K
Ɣ984K
Ɣ295K
Ɣ984E
Ɣ984E
Ɣ295E
Ɣ984X
Ɣ984X
Ɣ295X
Ɣ886X
Ɣ886X
Ɣ266X
Ɣ886X
Ɣ886X
Ɣ266X
Ɣ367I
Ɣ492I
Ɣ574I
Ɣ410I
Ɣ492I
Ɣ574I
Ɣ367I
Ɣ492I
Ɣ574I
Ɣ410I
Ɣ410C
Ɣ410U
Ɣ367U
Ɣ367U
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
395
HSS End Mills
Style:
Flutes:
920
920K
TN920
2-Flute
2-Flute
2-Flute
AMG Chart below.
example:
289 B
289 = SFM
4
Ŷ
Ɣ
Material:
Finish/Coating:
Standard:
Weldon
Shank
Straight
Shank
2
Type of Cut:
Tool Length:
Shank:
Slotting
Corner
Rounding
Tolerance:
End Grind:
Helix Angle:
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
396
HSS End Mills
Axial Direction:
Helix
Angle
Ramping, Ramping
Diving
3
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
409
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
410
411
Ŷ98A
Ŷ89A
Ɣ75B
Ŷ98A
Ŷ89A
Ɣ75B
Ŷ118A
Ŷ105A
Ɣ89B
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ98A
Ɣ79A
Ɣ98B
Ɣ59D
Ɣ49D
Ɣ59D
Ɣ49D
Ɣ72D
Ɣ59D
Ɣ98D
Ɣ20C
Ɣ98D
Ɣ20C
Ɣ118D
Ɣ23C
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ216C
Ɣ236C
Ɣ236C
Ɣ197E
Ɣ180E
Ɣ115E
Ɣ197E
Ɣ180E
Ɣ115E
Ɣ236E
Ɣ216E
Ɣ138E
Ɣ197C
Ɣ197C
Ɣ236C
905
921
TN921
922
980
981
2-Flute
2-Flute
2-Flute
2-Flute
2-Flute
412
412
413
413
414
414
2-Flute
923
2-Flute
TN923
2-Flute
907
2-Flute
930
3-Flute
931
933
940
TN940
3-Flute
3-Flute
MultiFlute
MultiFlute
418
418
HSS End Mills
2-Flute
982
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Ŷ112S
Ŷ89S
Ɣ79T
Ŷ98A
Ŷ89A
Ɣ75B
Ŷ118A
Ŷ105A
Ɣ89B
Ŷ98A
Ŷ89A
Ɣ75B
415
Ŷ164A
Ɣ131A
Ɣ115B
Ŷ148A
Ɣ118A
Ɣ102B
Ŷ148A
Ɣ118A
Ɣ102B
Ɣ75F
Ɣ62F
Ɣ66F
Ɣ56F
Ɣ66F
Ɣ56F
Ɣ89S
Ɣ72S
Ɣ89T
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ98A
Ɣ79A
Ɣ98B
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ62V
Ɣ49V
Ɣ59D
Ɣ49D
Ɣ72D
Ɣ59D
Ɣ59D
Ɣ49D
Ɣ92D
Ɣ82D
Ɣ108V
Ɣ20U
Ɣ98D
Ɣ20C
Ɣ118D
Ɣ23C
Ɣ98D
Ɣ20C
Ɣ157D
Ɣ141D
Ɣ200U
Ɣ223U
Ɣ223U
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ216C
Ɣ236C
Ɣ236C
Ɣ180C
Ɣ197C
Ɣ197C
Ŷ410C
Ɣ243X
Ɣ194X
Ɣ144X
Ɣ197E
Ɣ180E
Ɣ115E
Ɣ236E
Ɣ216E
Ɣ138E
Ɣ197E
Ɣ180E
Ɣ115E
Ŷ984E
Ŷ984E
Ŷ295E
Ŷ886E
Ŷ886E
Ŷ266E
Ɣ200U
Ɣ197C
Ɣ236C
Ɣ197C
Ɣ410C
Ɣ367C
Ŷ367C
415
Ŷ98A
Ŷ89A
Ɣ75B
416
416
Ŷ118A
Ŷ105A
Ɣ89B
Ŷ112S
Ŷ89S
Ɣ79T
Ɣ131A
Ŷ115B
Ɣ98B
Ɣ66C
Ɣ164A
Ŷ131A
Ŷ115B
Ɣ98B
Ɣ131A
Ŷ115B
Ɣ98B
Ɣ66C
Ɣ75F
Ɣ98A
Ɣ79A
Ɣ98B
Ɣ89S
Ɣ72S
Ɣ89T
Ɣ82D
Ɣ59D
Ɣ49D
Ɣ72D
Ɣ59D
Ɣ62V
Ɣ49V
Ɣ141D
Ɣ98D
Ɣ20C
Ɣ118D
Ɣ23C
Ɣ108V
Ɣ20U
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ216C
Ɣ236C
Ɣ236C
Ɣ200U
Ɣ223U
Ɣ223U
Ŷ886E
Ŷ886E
Ŷ266E
Ɣ197E
Ɣ180E
Ɣ115E
Ɣ236E
Ɣ216E
Ɣ138E
Ɣ243X
Ɣ194X
Ɣ144X
Ɣ367C
Ɣ197C
Ɣ236C
Ɣ200U
Ɣ75A
Ɣ131B
Ɣ82B
Ɣ92D
Ŷ75D
Ɣ33D
Ŷ43C
Ɣ20D
Ŷ410C
Ŷ410C
Ŷ49C
Ɣ295E
Ɣ197A
Ɣ92A
Ɣ75A
Ɣ131B
Ɣ82B
Ŷ92D
Ɣ75D
Ŷ157D
Ɣ43C
Ŷ410C
Ŷ410C
Ŷ410C
Ɣ984E
Ɣ295E
Ɣ75A
Ɣ131B
Ɣ82B
Ɣ92D
Ŷ75D
Ɣ33D
Ŷ43C
Ɣ20D
Ŷ410C
Ŷ410C
Ŷ49C
Ɣ295E
Ɣ197A
Ɣ410C
Ɣ410C
419
420
Ŷ115S
Ŷ92S
Ŷ79T
Ɣ69T
Ŷ138S
Ŷ112S
Ŷ95T
Ɣ82T
Ɣ52Y
Ɣ62Y
Ɣ92S
Ɣ75S
Ɣ92T
Ɣ56T
Ŷ62V
Ɣ52V
Ɣ112S
Ɣ92S
Ɣ112T
Ɣ66T
Ŷ75V
Ɣ62V
Ŷ108V
Ɣ20U
Ŷ131V
Ɣ23U
Ŷ203U
Ŷ223U
Ŷ223U
Ŷ243U
Ŷ269U
Ŷ269U
Ɣ197X
Ɣ148X
Ɣ236X
Ɣ177X
Ɣ203U
Ɣ243U
Ɣ62F
Ɣ62F
Ɣ82A
Ɣ66A
Ɣ82B
Ŷ367C
417
Ɣ410C
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
397
HSS End Mills
Style:
Flutes:
941
944
945, 900
TN945
MultiFlute
MultiFlute
4-Flute
4-Flute
AMG Chart below.
example:
289 B
289 = SFM
4
Ŷ
Ɣ
Material:
Finish/Coating:
Standard:
Weldon
Shank
Straight
Shank
2
Type of Cut:
Tool Length:
Shank:
Slotting
Corner
Rounding
Tolerance:
End Grind:
Helix Angle:
1
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
398
HSS End Mills
Axial Direction:
Helix
Angle
Ramping, Ramping
Diving
3
Hardness
HB
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
422
421
421 422-423
Ŷ148S
Ŷ118S
Ŷ102T
Ɣ89T
Ŷ148S
Ŷ118S
Ŷ102T
Ɣ89T
Ŷ164S
Ŷ131S
Ŷ115T
Ɣ98T
Ŷ138S
Ŷ112S
Ŷ95T
Ɣ82T
Ɣ66Y
Ɣ66Y
Ɣ75Y
Ɣ62Y
Ɣ82S
Ɣ66S
Ɣ118T
Ɣ72T
Ŷ82V
Ɣ66V
Ɣ82S
Ɣ66S
Ɣ118T
Ɣ72T
Ŷ82V
Ɣ66V
Ɣ92S
Ɣ75S
Ɣ131T
Ɣ82T
Ŷ92V
Ɣ75V
Ɣ112S
Ɣ92S
Ɣ112T
Ɣ66T
Ŷ75V
Ɣ62V
Ŷ141V
Ɣ36U
Ŷ141V
Ɣ36U
Ŷ157V
Ɣ43U
Ŷ131V
Ɣ23U
Ŷ367U
Ŷ367U
Ŷ367U
Ŷ367U
Ŷ367U
Ŷ367U
Ŷ410U
Ŷ410U
Ŷ410U
Ŷ243U
Ŷ269U
Ŷ269U
Ɣ886X
Ɣ886X
Ɣ266X
Ɣ886X
Ɣ886X
Ɣ266X
Ɣ984X
Ɣ984X
Ɣ295X
Ɣ236X
Ɣ177X
Ɣ367U
Ɣ367U
Ɣ410U
Ɣ243U
946
4-Flute
TN946
901
947
4-Flute 4-Flute 4-Flute
943
TN943
948
TN948
4-Flute 4-Flute 4-Flute 4-Flute
911
917
2-Flute 4-Flute
Mini
Mini
919
883
4-Flute
Mini
Corner
C191
C192
2-Flute 2-Flute
Rounding
C291
C292
C391
C392
MultiFlute
MultiFlute
3-Flute
3-Flute
Slot
Drill
Slot
Drill
Slot
Drill
HSS End Mills
Threaded Shank End Mills
Slot
Drill
423
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
424
424
Ŷ138S
Ŷ112S
Ŷ95T
Ɣ82T
Ŷ148S
Ŷ118S
Ŷ102T
Ɣ89T
425
426
427
427
Ŷ115S
Ŷ92S
Ŷ79T
Ɣ69T
Ŷ138S
Ŷ112S
Ŷ95T
Ɣ82T
Ŷ115S
Ŷ92S
Ŷ79T
Ɣ69T
Ŷ138S
Ŷ112S
Ŷ95T
Ɣ82T
Ɣ62Y
Ɣ66Y
Ɣ52Y
Ɣ62Y
Ɣ52Y
Ɣ62Y
Ɣ82S
Ɣ66S
Ɣ118T
Ɣ72T
Ŷ82V
Ɣ66V
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ59D
Ɣ49D
Ɣ112S
Ɣ92S
Ɣ112T
Ɣ66T
Ŷ75V
Ɣ62V
Ɣ112S
Ɣ92S
Ɣ112T
Ɣ66T
Ŷ75V
Ɣ62V
Ɣ92S
Ɣ75S
Ɣ92T
Ɣ56T
Ŷ62V
Ɣ52V
Ɣ112S
Ɣ92S
Ɣ112T
Ɣ66T
Ŷ75V
Ɣ62V
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ59D
Ɣ49D
Ɣ92S
Ɣ75S
Ɣ92T
Ɣ56T
Ŷ62V
Ɣ52V
Ɣ59D
Ɣ49D
Ɣ59D
Ɣ49D
Ɣ59D
Ɣ49D
Ɣ98D
Ɣ20C
Ŷ131V
Ɣ23U
Ŷ141V
Ɣ36U
Ɣ98D
Ɣ20C
Ŷ108V
Ɣ20U
Ŷ131V
Ɣ23U
Ŷ108V
Ɣ20U
Ŷ131V
Ɣ23U
Ɣ98D
Ɣ20C
Ɣ98D
Ɣ20C
Ɣ98D
Ɣ20C
Ɣ180C
Ɣ197C
Ɣ197C
Ŷ243U
Ŷ269U
Ŷ269U
Ŷ367U
Ŷ367U
Ŷ367U
Ɣ180C
Ɣ197C
Ɣ197C
Ŷ203U
Ŷ223U
Ŷ223U
Ŷ243U
Ŷ269U
Ŷ269U
Ŷ203U
Ŷ223U
Ŷ223U
Ŷ243U
Ŷ269U
Ŷ269U
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ180E
Ɣ115E
Ɣ236X
Ɣ177X
Ɣ886X
Ɣ886X
Ɣ266X
Ɣ180E
Ɣ115E
Ɣ197X
Ɣ148X
Ɣ236X
Ɣ177X
Ɣ197X
Ɣ148X
Ɣ236X
Ɣ177X
Ɣ180E
Ɣ115E
Ɣ197E
Ɣ180E
Ɣ115E
Ɣ197E
Ɣ180E
Ɣ115E
Ɣ197C
Ɣ243U
Ɣ367U
Ɣ197C
Ɣ203U
Ɣ243U
Ɣ203U
Ɣ243U
Ɣ197C
Ɣ197C
Ɣ197C
Ŷ98A
Ŷ89A
Ɣ75B
Ɣ82A
Ɣ66A
Ɣ82B
425
Ŷ98A
Ŷ89A
Ɣ75B
428
Ŷ98A
Ŷ89A
Ɣ75B
428
Ŷ98A
Ŷ89A
Ɣ75B
429
Ŷ98A
Ŷ89A
Ɣ75B
429
Ŷ66p
Ŷ66p
Ŷ52p
Ŷ46p
Ɣ33p
Ɣ26p
Ŷ43P
Ŷ30P
Ɣ20R
Ɣ16R
Ŷ59R
Ŷ49R
Ŷ52R
Ŷ33R
Ŷ52N
Ŷ36O
Ɣ20O
Ŷ66P
Ŷ13O
Ɣ7M
Ŷ131P
Ŷ148P
Ŷ148P
Ɣ16M
Ŷ180R
Ŷ134R
Ŷ85R
Ŷ56R
Ɣ56R
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
430
432
433
435
436
436
Ŷ154A
Ŷ121A
Ɣ105B
Ɣ92B
Ŷ138A
Ŷ112A
Ɣ95B
Ɣ82B
Ŷ138S
Ŷ112S
Ŷ95T
Ɣ82T
Ŷ125S
Ŷ98S
Ŷ85T
Ɣ75T
Ɣ138A
Ŷ112A
Ŷ95B
Ɣ82B
Ɣ125A
Ŷ98A
Ŷ85B
Ɣ75B
Ɣ69F
Ɣ62F
Ɣ62Y
Ɣ56Y
Ɣ62F
Ɣ56F
Ɣ69A
Ɣ69A
Ɣ121B
Ɣ75B
Ŷ85D
Ɣ69C
Ɣ75A
Ɣ62A
Ɣ112B
Ɣ69B
Ŷ75D
Ɣ62D
Ɣ75S
Ɣ62S
Ɣ112T
Ɣ69T
Ŷ75V
Ɣ62V
Ɣ69S
Ɣ56S
Ɣ98T
Ɣ62T
Ŷ69V
Ɣ56V
Ɣ75A
Ɣ62A
Ɣ112B
Ɣ69B
Ŷ75D
Ɣ62D
Ɣ69A
Ɣ56A
Ɣ98B
Ɣ62B
Ŷ69D
Ɣ56D
Ŷ148D
Ɣ39C
Ŷ134D
Ɣ36C
Ŷ134V
Ɣ36U
Ŷ118V
Ɣ33U
Ŷ134D
Ɣ36C
Ŷ118D
Ɣ33C
Ŷ384C
Ŷ384C
Ŷ384C
Ŷ348C
Ŷ348C
Ŷ348C
Ŷ348U Ŷ315U
Ŷ348U Ŷ315U
Ŷ348U Ŷ315U
Ŷ348C
Ŷ348C
Ŷ348C
Ŷ315C
Ŷ315C
Ŷ315C
Ɣ925E
Ɣ925E
Ɣ276E
Ɣ840E
Ɣ840E
Ɣ249E
Ɣ840X
Ɣ249X
Ɣ754X
Ɣ226X
Ɣ840E
Ɣ249E
Ɣ754E
Ɣ226E
Ɣ385C
Ɣ348C
Ɣ348U Ɣ315U
Ɣ348C
Ɣ315C
399
9002 - TN9002
Ɣ End Mill
Ɣ Rougher
Ɣ Fraises d’ébauche
Ɣ Fresas Gran Desbaste
9002
Ŷ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
Ɣ
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
5/8
3/4
3/4
1.1/4
1.1/4
1.3/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
2“
l1
Inch
2.7/16
2.1/2
2.1/2
3.1/4
3.1/4
3.3/8
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
5
5
6
6
6
8
EDP #
or
e-Code
5210014
5210015
5210016
5210017
5210018
5210019
5210020
5210021
5210022
5210023
5210024
5210025
5210026
5210027
# Flutes
4
4
4
4
4
4
4
4
5
5
6
6
6
8
EDP # or
e-Code
5260014
5260015
5260016
5260017
5260018
5260019
5260020
5260021
5260022
5260023
5260024
5260025
5260026
5260027
TN9002
Ŷ
d1
Ø
inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
400
Ɣ
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
5/8
3/4
3/4
1.1/4
1.1/4
1.3/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
2“
l1
Inch
2.7/16
2.1/2
2.1/2
3.1/4
3.1/4
3.3/8
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
inch
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
TC9002
Ɣ End Mill
Ɣ Rougher
TC9002
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
5/8
3/4
3/4
1.1/4
1.1/4
1.3/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
2“
l1
Inch
2.7/16
2.1/2
2.1/2
3.1/4
3.1/4
3.3/8
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
5
5
6
6
6
8
EDP #
or
e-Code
5270014
5270015
5270016
5270017
5270018
5270019
5270020
5270021
5270022
5270023
5270024
5270025
5270026
5270027
401
9008 - TN9008
Ɣ End Mill
Ɣ Rougher, fine profile
9008
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
1.1/4
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
4“
4“
4“
l1
Inch
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
4
4
4
4
4
6
5
6
6
6
8
EDP #
or
e-Code
5210078
5210079
5210080
5210081
5210082
5210083
5210084
5210085
5210086
5210087
5210088
# Flutes
4
4
4
4
4
6
5
6
6
6
8
EDP #
or
e-Code
5260078
5260079
5260080
5260081
5260082
5260083
5260084
5260085
5260086
5260087
5260088
TN9008
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
402
d1
decimal
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
1.1/4
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
4“
4“
4“
l1
Inch
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
TC9008 - 9003
Ɣ End Mill
Ɣ Rougher, fine profile
Ɣ Long length
TC9008
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
1.1/4
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
4“
4“
4“
l1
Inch
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
9003
# Flutes
4
4
4
4
4
6
5
6
6
6
8
EDP #
or
e-Code
5270078
5270079
5270080
5270081
5270082
5270083
5270084
5270085
5270086
5270087
5270088
9003
Ɣ End Mill
Ɣ Rougher, coarse profile
Ɣ Regular length
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
l1
Inch
5/8
3/4
3/4
1.1/4
1.1/4
1.3/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
2“
Inch
2.7/16
2.1/2
2.1/2
3.1/4
3.1/4
3.3/8
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
5
5
6
6
6
8
EDP #
or
e-Code
5210028
5210029
5210030
5210031
5210032
5210033
5210034
5210035
5210036
5210037
5210038
5210039
5210040
5210041
403
TN9003 - TC9003
Ɣ End Mill
TN9003
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
5/8
3/4
3/4
1.1/4
1.1/4
1.3/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
2“
l1
Inch
2.7/16
2.1/2
2.1/2
3.1/4
3.1/4
3.3/8
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
l2
Inch
5/8
3/4
3/4
1.1/4
1.1/4
1.3/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
2“
l1
Inch
2.7/16
2.1/2
2.1/2
3.1/4
3.1/4
3.3/8
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
5
5
6
6
6
8
EDP #
or
e-Code
5260028
5260029
5260030
5260031
5260032
5260033
5260034
5260035
5260036
5260037
5260038
5260039
5260040
5260041
# Flutes
4
4
4
4
4
4
4
4
5
5
6
6
6
8
EDP #
or
e-Code
5270028
5270029
5270030
5270031
5270032
5270033
5270034
5270035
5270036
5270037
5270038
5270039
5270040
5270041
TC9003
Ŷ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
404
Ɣ
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
9009 - TN9009
Ɣ End Mill
Ɣ Long length
9009
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
1.1/4
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
4“
4“
4“
l1
Inch
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
4
4
4
4
4
6
5
6
6
6
8
EDP #
or
e-Code
5210089
5210090
5210091
5210092
5210093
5210094
5210095
5210096
5210097
5210098
5210099
# Flutes
4
4
4
4
4
6
5
6
6
6
8
EDP #
or
e-Code
5260089
5260090
5260091
5260092
5260093
5260094
5260095
5260096
5260097
5260098
5260099
TN9009
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
1.1/4
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
4“
4“
4“
l1
Inch
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
405
TC9009 - 9004
Ɣ End Mill
TC9009
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
1.7500
2.0000
l2
Inch
1.1/4
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
4“
4“
4“
l1
Inch
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
4
4
4
4
4
6
5
6
6
6
8
EDP #
or
e-Code
5270089
5270090
5270091
5270092
5270093
5270094
5270095
5270096
5270097
5270098
5270099
9004
Ɣ End Mill
Ɣ Truncated, rougher & finisher
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
2“
406
d1
decimal
Inch
0.2500
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
2.0000
l2
Inch
5/8
3/4
1.1/4
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
l1
Inch
2.7/16
2.1/2
3.1/4
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
1/2
5/8
3/4
3/4
1“
1.1/4
1.1/4
1.1/4
# Flutes
3
4
4
4
4
5
5
6
6
6
EDP #
or
e-Code
5210042
5210043
5210044
5210045
5210046
5210047
5210048
5210049
5210050
5210051
963 - 960
Ɣ End Mill
Ɣ 2-Flute, Regular Length
963
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1“
Ɣ
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
3/8
7/16
1/2
9/16
9/16
1“
1.5/16
1.5/16
1.5/8
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
3.1/4
3.3/4
3.7/8
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
5/8
3/4
1“
# Flutes
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110633
5110634
5110635
5110636
5110637
5110638
5110639
5110640
5110641
963 - 960
960
Ɣ End Mill
Ɣ Multi-flute, regular length
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1“
1“
1.1/4
1.1/2
2“
Ɣ
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
0.5000
0.6250
0.6250
0.7500
0.7500
1.0000
1.0000
1.2500
1.5000
2.0000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1.1/4
1.1/4
1.5/8
1.5/8
1.5/8
1.5/8
2“
2“
2“
2“
4“
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
3/1/4
3.1/4
3.3/4
3.3/4
3.7/8
3.7/8
4.1/2
4.1/2
4.1/2
4.1/2
7.3/4
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1“
1“
1.1/4
1.1/4
2“
# Flutes
4
4
4
4
4
4
6
6
4
4
6
6
4
6
6
6
EDP #
or
e-Code
5110660
5110661
5110662
5110663
5110664
5110665
5110772
5110773
5110666
5110667
5110774
5110778
5110669
5110670
5110671
5110782
407
961 - 962
Ɣ End Mill
Ɣ Multi-flute, long length
961
Ŷ
Ɣ
d1
Ø
Inch
3/8
1/2
5/8
3/4
3/4
1“
1“
1.1/4
d1
decimal
Inch
0.3750
0.5000
0.6250
0.7500
0.7500
1.0000
1.0000
1.2500
l2
Inch
1.1/2
2“
2.1/2
3“
3“
4“
4“
4“
d2
Ø
Inch
3/8
1/2
5/8
3/4
3/4
1“
1“
1.1/4
l1
Inch
3.1/4
4“
4.5/8
5.1/4
5.1/4
6.1/2
6.1/2
6.1/2
# Flutes
4
4
4
4
6
6
4
6
EDP #
or
e-Code
5110672
5110673
5110674
5110675
5110775
5110779
5110677
5110678
962
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
3/8
1/2
5/8
3/4
1“
408
d1
decimal
Inch
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
2.1/2
3“
4“
4“
6“
l1
Inch
4.1/4
5“
6.1/8
6.1/4
8.1/2
d2
Ø
Inch
3/8
1/2
5/8
3/4
1“
# Flutes
4
4
4
4
4
EDP #
or
e-Code
5110679
5110680
5110681
5110682
5110684
920
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
11/16
11/16
3/4
3/4
3/4
13/16
7/8
7/8
7/8
15/16
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.1/2
1.1/2
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5000
0.5625
0.6250
0.6250
0.6875
0.6875
0.7500
0.7500
0.7500
0.8125
0.8750
0.8750
0.8750
0.9375
1.0000
1.0000
1.0000
1.0000
1.1250
1.1250
1.1250
1.2500
1.2500
1.2500
1.2500
1.3750
1.3750
1.5000
1.5000
l2
Inch
3/8
7/16
1/2
9/16
9/16
13/16
13/16
1“
1.1/8
1.1/8
1.5/16
1.5/16
1.5/16
1.5/16
1.5/16
1.5/16
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.1/2
1.3/4
1.3/4
2“
2
1.5000
1.7500
1.7500
2.0000
2.0000
1.5/8
1.1/2
1.5/8
1.5/8
1.1/2
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
2.11/16
2.11/16
3.1/4
3.3/8
3.3/8
3.3/4
3.3/4
3.5/8
3.5/8
3.3/4
3.7/8
4“
4“
4.1/8
4.1/8
4“
4“
4.1/8
4.1/2
4.1/8
4.1/4
4.1/4
4.1/2
4.1/2
4.1/2
4.1/4
4.1/4
4.1/4
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
1/2
1/2
5/8
3/4
5/8
5/8
7/8
3/4
5/8
5/8
7/8
1“
3/4
3/4
7/8
1“
1“
1.1/4
7/8
3/4
3/4
1“
1“
1.1/4
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110302
5110303
5110304
5110305
5110306
5110307
5110308
5110309
5110310
5110311
5110314
5110315
5110312
5110313
5110316
5110708
5110317
5110318
5110321
5110709
5110319
5110320
5110323
5110326
5110710
5111714
5110324
5110327
5110328
5110331
5110325
5111715
5111716
5110329
5110330
5110332
4.1/4
3.7/8
4.1/2
4.1/2
3.7/8
3/4
3/4
1.1/4
1.1/4
3/4
2
2
2
2
2
5111717
5111718
5110334
5110336
5111719
409
920K
Ɣ End Mill
Ɣ 2-flute, keyway, regular length
Ɣ Fraises à rainurer les clavettes
Ɣ Fresas de ranurar
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
410
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
l2
Inch
3/8
7/16
1/2
9/16
9/16
1“
1.5/16
1.5/16
1.1/2
1.5/8
1.5/8
1.5/8
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
3.1/4
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/4
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110715
5110716
5110717
5110718
5110719
5110720
5110721
5110722
5110723
5110724
5110725
5110726
TN920
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
11/16
11/16
3/4
3/4
3/4
13/16
7/8
7/8
7/8
15/16
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.1/2
1.3/4
1.3/4
2“
2“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5000
0.5625
0.6250
0.6250
0.6875
0.6875
0.7500
0.7500
0.7500
0.8125
0.8750
0.8750
0.8750
0.9375
1.0000
1.0000
1.0000
1.0000
1.1250
1.1250
1.1250
1.2500
1.2500
1.2500
1.2500
1.3750
1.3750
1.5000
1.7500
1.7500
2.0000
2.0000
l2
Inch
3/8
7/16
1/2
9/16
9/16
13/16
13/16
1“
1.1/8
1.1/8
1.5/16
1.5/16
1.5/16
1.5/16
1.5/16
1.5/16
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.1/2
1.5/8
1.5/8
1.1/2
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
2.11/16
2.11/16
3.1/4
3.3/8
3.3/8
3.3/4
3.3/4
3.5/8
3.5/8
3.3/4
3.7/8
4“
4“
4.1/8
4.1/8
4“
4“
4.1/8
4.1/2
4.1/8
4.1/4
4.1/4
4.1/2
4.1/2
4.1/2
4.1/4
4.1/4
4.1/4
4.1/2
4.1/4
3.7/8
4.1/2
4.1/2
3.7/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
1/2
1/2
5/8
3/4
5/8
5/8
7/8
3/4
5/8
5/8
7/8
1“
3/4
3/4
7/8
1“
1“
1.1/4
7/8
3/4
3/4
1“
3/4
3/4
1.1/4
1.1/4
3/4
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5160302
5160303
5160304
5160305
5160306
5160307
5160308
5160309
5160310
5160311
5160314
5160315
5160312
5160313
5160316
5160708
5160317
5160318
5160321
5160709
5160319
5160320
5160323
5160326
5160710
5161714
5160324
5160327
5160328
5160331
5160325
5161715
5161716
5160329
5161717
5161718
5160334
5160336
5161719
411
905 - 921
Ɣ End Mill
905
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
1.1/8
1.1/4
1.1/2
Ɣ
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6250
0.7500
0.7500
0.8750
0.8750
1.0000
1.0000
1.1250
1.2500
1.5000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1“
1“
1.1/8
1.1/8
1.3/8
1.5/8
1.5/16
1.7/8
2“
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
3/4
1/2
3/4
7/8
1“
3/4
1“
1.1/4
1.1/4
l1
inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
3.1/4
3.1/4
3.3/8
3.3/8
3.3/4
3.7/8
3.5/8
4.1/8
4.1/4
4.3/4
4.1/2
4.3/4
5“
5“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110390
5110391
5110392
5110393
5110394
5110395
5110396
5110700
5110701
5110397
5110398
5110702
5110703
5110399
5110400
5110704
5110401
5110402
5110403
921
Ɣ End Mill
Ɣ 2-flute, keyway, long length
Ŷ
d1
Ø
Inch
3/8
1/2
5/8
3/4
1“
412
Ɣ
d1
decimal
Inch
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
1.1/2
1.7/8
2“
2.1/4
3“
l1
Inch
3.1/4
4“
4.1/8
4.1/2
5.1/2
d2
Ø
Inch
3/8
1/2
5/8
3/4
1“
# Flutes
2
2
2
2
2
EDP #
or
e-Code
5110337
5110338
5110339
5110340
5110342
TN921 - 922
Ɣ End Mill
Ɣ 2-flute, long length
TN921
Ŷ
Ɣ
d1
Ø
Inch
3/8
1/2
5/8
3/4
1“
d1
decimal
Inch
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
1.1/2
1.7/8
2“
2.1/4
3“
d2
Ø
Inch
3/8
1/2
5/8
3/4
1“
l1
Inch
3.1/4
4“
4.1/8
4.1/2
5.1/2
# Flutes
2
2
2
2
2
EDP #
or
e-Code
5160337
5160338
5160339
5160340
5160342
922
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
d1
decimal
Inch
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
l2
Inch
5/8
3/4
3/4
1“
1.3/8
1.5/8
2“
2.1/2
3“
l1
Inch
3.1/16
3.1/8
3.1/4
4“
4.5/8
5.1/4
6“
7.1/4
7.1/4
d2
Ø
Inch
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
# Flutes
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110352
5110353
5110354
5110355
5110356
5110357
5110358
5110359
5110360
413
980 - 981
Ɣ End Mill
980
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
l2
Inch
5/8
3/4
3/4
1“
1.1/4
1.5/8
1.5/8
2“
l1
Inch
2.7/16
2.1/2
2.1/2
2.11/16
3.1/4
3.3/4
3.7/8
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
1/2
5/8
3/4
1“
# Flutes
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110602
5110603
5110604
5110605
5110606
5110607
5110608
5110609
981
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
414
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
l2
Inch
1.1/4
1.3/8
1.1/2
1.3/4
2“
2.1/2
3“
4“
l1
Inch
3.1/16
3.1/8
3.1/4
3.3/4
4“
4.5/8
5.1/4
6.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
5/8
3/4
1“
# Flutes
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110613
5110614
5110615
5110616
5110617
5110618
5110619
5110620
982 - 923
Ɣ End Mill
982
Ŷ
d1
Ø
Inch
1/4
5/16
3/8
1/2
5/8
3/4
1“
Ɣ
d1
decimal
Inch
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
1.0000
l2
Inch
1.3/4
2“
2.1/2
3“
4“
4“
6“
l1
Inch
3.9/16
3.3/4
4.1/4
5“
6.1/8
6.1/4
8.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
5/8
3/4
1“
# Flutes
2
2
2
2
2
2
2
EDP #
or
e-Code
5110624
5110625
5110626
5110627
5110628
5110629
5110630
923
Ɣ Fraises à rainurer
Ɣ End Mill
Ŷ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
Ɣ Fresas Frontales
Ɣ
d1
decimal
Inch
0.1250
0.1562
0.1875
0.2188
0.2500
0.2812
0.3125
0.3438
0.3750
0.4062
0.4375
0.4688
0.5000
0.5625
0.6250
0.6875
0.7500
0.8125
0.8750
0.9375
1.0000
l2
Inch
3/8
7/16
7/16
1/2
1/2
9/16
9/16
9/16
9/16
13/16
13/16
13/16
13/16
1.1/8
1.1/8
1.5/16
1.5/16
1.9/16
1.9/16
1.5/8
1.5/8
l1
Inch
3.1/16
3.1/8
3.1/4
3.1/4
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
4.1/8
4.1/8
4.1/8
4.1/8
5“
5“
5.5/8
5.5/8
6.1/8
6.1/8
6.3/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110364
5110365
5110366
5110367
5110368
5110369
5110370
5110371
5110372
5110373
5110374
5110375
5110376
5110377
5110378
5110379
5110380
5110381
5110382
5110383
5110384
415
TN923 - 907
Ɣ End Mill
Ɣ Fresas Frontales
TN923
Ŷ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
7/8
1“
Ɣ
d1
decimal
Inch
0.1250
0.1562
0.1875
0.2188
0.2500
0.2812
0.3125
0.3438
0.3750
0.4062
0.4375
0.4688
0.5000
0.5625
0.6250
0.6875
0.7500
0.8750
1.0000
l2
Inch
3/8
7/16
7/16
1/2
1/2
9/16
9/16
9/16
9/16
13/16
13/16
13/16
13/16
1.1/8
1.1/8
1.5/16
1.5/16
1.9/16
1.5/8
l1
Inch
3.1/16
3.1/8
3.1/4
3.1/4
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
4.1/8
4.1/8
4.1/8
4.1/8
5“
5“
5.5/8
5.5/8
6.1/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
1“
# Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5160364
5160365
5160366
5160367
5160368
5160369
5160370
5160371
5160372
5160373
5160374
5160375
5160376
5160377
5160378
5160379
5160380
5160382
5160384
907
Ɣ End Mill
regular length
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
416
Ɣ
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
l2
Inch
3/8
7/16
1/2
9/16
9/16
13/16
13/16
1.1/8
1.5/16
1.5/8
l1
Inch
3.1/16
3.1/4
3.3/8
3.1/2
3.1/2
4.1/8
4.1/8
5“
5.5/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
1/2
5/8
3/4
1“
# Flutes
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110416
5110417
5110418
5110419
5110420
5110421
5110422
5110423
5110424
5110426
930
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
3/4
3/4
3/4
7/8
1“
1“
1“
1.1/8
1.1/4
1.1/4
1.1/2
1.3/4
2“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5000
0.5625
0.6250
0.6250
0.7500
0.7500
0.7500
0.8750
1.0000
1.0000
1.0000
1.1250
1.2500
1.2500
1.5000
1.7500
2.0000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1“
1“
1.1/4
1.3/8
1.3/8
1.5/8
1.5/8
1.5/8
1.5/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
2“
2“
2“
2“
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
2.11/16
2.11/16
3.1/4
3.3/8
3.3/8
3.3/4
3.5/8
3.3/4
3.7/8
4.1/8
4.1/8
4“
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
1/2
5/8
3/4
3/4
3/4
5/8
1“
1“
1“
1.1/4
1.1/4
1.1/4
1.1/4
# Flutes
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
5110221
5110222
5110223
5110224
5110225
5110226
5110227
5110228
5110229
5110230
5110232
5110231
5110233
5110696
5110697
5110698
5110235
5110237
5110238
5110239
5110240
5110241
5110242
5110243
417
931 - 933
Ɣ End Mill
931
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
1.0000
l2
Inch
1.1/4
1.3/8
1.1/2
1.3/4
2“
2.1/2
3“
4“
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
5/8
3/4
1“
l1
Inch
3.1/16
3.1/8
3.1/4
3.3/4
4“
4.5/8
5.1/4
6.1/2
# Flutes
3
3
3
3
3
3
3
3
EDP #
or
e-Code
5110244
5110245
5110246
5110247
5110248
5110249
5110250
5110252
933
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1“
418
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.7500
1.0000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1“
1“
1.3/8
1.3/8
1.5/8
1.7/8
l1
Inch
3.1/16
3.1/4
3.3/8
3.1/2
3.1/2
4.1/8
4.1/8
5“
5“
5.5/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
1/2
5/8
5/8
3/4
1“
# Flutes
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
5110257
5110258
5110259
5110260
5110261
5110262
5110263
5110264
5110265
5110266
5110268
940
Ɣ End Mill
Ɣ Multi-flute, regular length
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
11/16
11/16
3/4
3/4
3/4
13/16
7/8
7/8
7/8
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
2“
2“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5000
0.5625
0.6250
0.6250
0.6875
0.6875
0.7500
0.7500
0.7500
0.8125
0.8750
0.8750
0.8750
1“
1“
1“
1“
1.1250
1.1250
1.1250
1.2500
1.2500
1.2500
1.2500
1.3750
1.3750
1.5000
1.5000
1.5000
1.7500
1.7500
2“
2“
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
2.11/16
2.11/16
3.1/4
3.3/8
3.3/8
3.3/4
3.5/8
3.3/4
3.5/8
3.3/4
3.7/8
4“
4“
4.1/8
4.1/8
4“
4.1/8
4.1/8
4.1/2
4“
4.1/4
4.1/2
4“
4.1/4
4.1/2
4.1/2
4.1/4
4.1/2
4.1/4
4.1/2
4.1/2
3.7/8
4.1/2
3.7/8
4.1/2
l2
Inch
3/8
1/2
5/8
3/4
3/4
1“
1“
1.1/4
1.3/8
1.3/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
2“
1.3/4
2“
2“
1.3/4
2“
2“
2“
2“
2“
2“
2“
2“
1.1/2
2“
1.1/2
2“
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
1/2
5/8
1/2
5/8
3/4
5/8
5/8
3/4
7/8
5/8
3/4
7/8
1“
3/4
7/8
1“
3/4
7/8
1“
1.1/4
3/4
1“
3/4
1“
1.1/4
3/4
1.1/4
3/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
4
4
6
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
EDP #
or
e-Code
5110001
5110002
5110003
5110004
5110005
5110006
5110007
5110008
5110009
5110010
5110013
5110011
5110014
5110012
5110015
5110711
5110016
5110017
5110712
5110020
5110019
5110713
5110022
5110025
5111720
5110023
5110026
5111721
5110024
5110027
5110030
5111722
5110028
5111723
5110029
5110031
5111724
5110033
5111725
5110035
419
TN940
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
5/8
11/16
11/16
3/4
3/4
3/4
13/16
7/8
7/8
7/8
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
2“
2“
420
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5000
0.5625
0.6250
0.6250
0.6875
0.6875
0.7500
0.7500
0.7500
0.8125
0.8750
0.8750
0.8750
1“
1“
1“
1“
1.1250
1.1250
1.1250
1.2500
1.2500
1.2500
1.2500
1.3750
1.3750
1.5000
1.5000
1.5000
1.7500
1.7500
2“
2“
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
2.11/16
2.11/16
3.1/4
3.3/8
3.3/8
3.3/4
3.3/4
3.5/8
3.5/8
3.3/4
3.7/8
4“
4“
4.1/8
4.1/8
4.1/8
4.1/8
4“
4.1/2
4.1/2
4.1/4
4“
4“
4.1/4
4.1/2
4.1/2
4.1/2
4.1/4
4.1/4
4.1/2
4.1/2
4.1/2
3.7/8
3.7/8
4.1/2
l2
Inch
3/8
1/2
5/8
3/4
3/4
1“
1“
1.1/4
1.3/8
1.3/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.5/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
1.7/8
2“
2“
2“
1.3/4
1.3/4
2“
2“
2“
2“
2“
2“
2“
2“
2“
1.1/2
1.1/2
2“
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
1/2
1/2
5/8
3/4
5/8
5/8
7/8
3/4
3/4
7/8
5/8
1“
1“
7/8
3/4
3/4
7/8
1“
1.1/4
1“
3/4
3/4
1“
1.1/4
1.1/4
3/4
3/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
4
4
4
4
6
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
EDP #
or
e-Code
5160001
5160002
5160003
5160004
5160005
5160006
5160007
5160008
5160009
5160010
5160013
5160014
5160011
5160012
5160015
5160711
5160016
5160017
5160020
5160712
5160713
5160022
5160019
5160025
5160026
5160023
5161720
5161721
5160024
5160027
5160030
5160028
5161722
5161723
5160029
5160031
5160033
5161724
5161725
5160035
941 - 944
Ɣ End Mill
Ɣ Multi-flute, long length
941
Ŷ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.1/4
1.1/2
1.1/2
1.3/4
2“
Ɣ
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
0.8750
1.0000
1.1250
1.2500
1.2500
1.5000
1.5000
1.7500
2.0000
l2
Inch
1.1/4
1.3/8
1.1/2
1.3/4
2“
2.1/2
3“
3.1/2
4“
4“
4“
4“
4“
4“
4“
4“
l1
Inch
3.1/16
2“
3.1/4
3.3/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
1/2
5/8
3/4
7/8
1“
1“
1“
1.1/4
1.1/4
1“
1.1/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
EDP #
or
e-Code
5110044
5110045
5110046
5110047
5110048
5110049
5110050
5110051
5110052
5110053
5110054
5110057
5110058
5110056
5110059
5110060
944
Ɣ End Mill
Ɣ Multi-flute, extra length
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
d1
decimal
Inch
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
l2
Inch
1.3/4
2“
2.1/2
3“
4“
4“
5“
6“
6“
6“
l1
Inch
3.9/16
3.3/4
4.1/4
5“
6.1/8
6.1/4
7.1/4
8.1/2
8.1/2
8.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
6
6
EDP #
or
e-Code
5110061
5110062
5110063
5110064
5110065
5110066
5110067
5110068
5110069
5110070
421
945 - TN945
Ɣ End Mill
945
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
1/2
5/8
11/16
3/4
7/8
1“
1.1/8
1.1/4
1.1/2
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
0.6250
0.6875
0.7500
0.8750
1.0000
1.1250
1.2500
1.5000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1.1/4
1.5/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
3.1/4
3.3/4
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
5/8
5/8
3/4
7/8
1“
1“
1.1/4
1.1/4
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5110071
5110072
5110073
5110074
5110075
5110076
5110077
5110078
5110079
5110080
5110081
5110082
5110083
5110084
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5160071
5160072
5160073
5160074
5160075
5160076
5160077
5160078
5160079
5160080
5160081
5160082
5160083
5160084
TN945
Ŷ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
1/2
5/8
11/16
3/4
7/8
1“
1.1/8
1.1/4
1.1/2
422
Ɣ
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
0.6250
0.6875
0.7500
0.8750
1.0000
1.1250
1.2500
1.5000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1.1/4
1.5/8
1.5/8
1.5/8
1.7/8
2“
2“
2“
2“
l1
Inch
2.5/16
2.3/8
2.7/16
2.1/2
2.1/2
3.1/4
3.3/4
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
4.1/2
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
5/8
5/8
3/4
7/8
1“
1“
1.1/4
1.1/4
900 - 946
Ɣ End Mill
900
Ŷ
Ɣ
d1
Ø
Inch
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/2
d1
decimal
Inch
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
1.5000
l2
Inch
3/4
1.1/4
1.5/8
1.5/8
1.7/8
2“
2“
2“
d2
Ø
Inch
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
1.1/4
l1
Inch
2.1/2
3.1/4
3.3/4
3.7/8
4.1/8
4.1/2
4.1/2
4.1/2
# Flutes
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5110172
5110173
5110174
5110175
5110176
5110177
5110178
5110179
946
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
d1
decimal
Inch
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
l2
Inch
1.1/4
1.3/8
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
l1
Inch
3.1/16
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
# Flutes
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5110085
5110086
5110087
5110088
5110089
5110090
5110091
5110092
5110093
423
TN946 - 901
Ɣ End Mill
TN946
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
d1
decimal
Inch
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
l2
Inch
1.1/4
1.3/8
1.1/2
2“
2.1/2
3“
3.1/2
4“
4“
d2
Ø
Inch
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
l1
Inch
3.1/16
3.1/8
3.1/4
4“
4.5/8
5.1/4
5.3/4
6.1/2
6.1/2
# Flutes
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5160085
5160086
5160087
5160088
5160089
5160090
5160091
5160092
5160093
901
Ɣ End Mill
Ɣ 4-flute, ball nose, long length
Ŷ
Ɣ
d1
Ø
Inch
1/2
5/8
3/4
1“
424
d1
decimal
Inch
0.5000
0.6250
0.7500
1.0000
l2
Inch
2“
2.1/2
3“
4“
l1
Inch
4“
4.5/8
5.1/4
6.1/2
d2
Ø
Inch
1/2
5/8
3/4
1“
# Flutes
4
4
4
4
EDP #
or
e-Code
5110180
5110181
5110182
5110183
947 - 943
Ɣ End Mill
Fraises de finition
947
Ŷ
d1
Ø
Inch
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
Ɣ
d1
decimal
Inch
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
1.2500
l2
Inch
1.3/4
2“
2.1/2
3“
4“
4“
5“
6“
6“
l1
Inch
3.9/16
3.3/4
4.1/4
5“
6.1/8
6.1/4
7.1/4
8.1/2
8.1/2
d2
Ø
Inch
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
1.1/4
# Flutes
4
4
4
4
4
4
4
4
4
Ɣ End Mill
EDP #
or
e-Code
5110094
5110095
5110096
5110097
5110098
5110099
5110100
5110101
5110102
943
Ŷ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
Ɣ
d1
decimal
Inch
0.1250
0.1563
0.1875
0.2188
0.2500
0.2813
0.3125
0.3438
0.3750
0.4063
0.4375
0.4688
0.5000
0.5625
0.6250
0.6875
0.7500
0.8125
0.8750
0.9375
1.0000
l2
Inch
3/8
7/16
1/2
9/16
5/8
11/16
3/4
3/4
3/4
1“
1“
1“
1“
1.3/8
1.3/8
1.5/8
1.5/8
1.7/8
1.7/8
1.7/8
1.7/8
l1
Inch
3.1/16
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
4.1/8
4.1/8
4.1/8
4.1/8
5“
5“
5.5/8
5.5/8
6.1/8
6.1/8
6.3/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1“
1“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5110186
5110187
5110188
5110189
5110190
5110191
5110192
5110193
5110194
5110195
5110196
5110197
5110198
5110199
5110200
5110201
5110202
5110203
5110204
5111043
5110206
425
TN943
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1“
426
d1
decimal
Inch
0.1250
0.1563
0.1875
0.2188
0.2500
0.2813
0.3125
0.3438
0.3750
0.4063
0.4375
0.4688
0.5000
0.5625
0.6250
0.6875
0.7500
0.8125
0.8750
1.0000
l2
Inch
3/8
7/16
1/2
9/16
5/8
11/16
3/4
3/4
3/4
1“
1“
1“
1“
1.3/8
1.3/8
1.5/8
1.5/8
1.7/8
1.7/8
1.7/8
l1
Inch
3.1/16
3.1/4
3.1/4
3.1/4
3.3/8
3.3/8
3.1/2
3.1/2
3.1/2
4.1/8
4.1/8
4.1/8
4.1/8
5“
5“
5.5/8
5.5/8
6.1/8
6.1/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5160186
5160187
5160188
5160189
5160190
5160191
5160192
5160193
5160194
5160195
5160196
5160197
5160198
5160199
5160200
5160201
5160202
5160203
5160204
5160206
948 - TN948
Ɣ End Mill
948
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1“
1.3/8
1.5/8
1.7/8
1.7/8
l1
Inch
3.1/16
3.1/4
3.3/8
3.1/2
3.1/2
4.1/2
5“
5.5/8
6.1/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
# Flutes
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5110162
5110163
5110164
5110165
5110166
5110167
5110168
5110169
5110170
5110171
# Flutes
4
4
4
4
4
4
4
4
4
4
EDP #
or
e-Code
5160162
5160163
5160164
5160165
5160166
5160167
5160168
5160169
5160170
5160171
TN948
Ŷ
Ɣ
d1
Ø
Inch
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1“
d1
decimal
Inch
0.1250
0.1875
0.2500
0.3125
0.3750
0.5000
0.6250
0.7500
0.8750
1.0000
l2
Inch
3/8
1/2
5/8
3/4
3/4
1“
1.3/8
1.5/8
1.7/8
1.7/8
l1
Inch
3.1/16
3.1/4
3.3/8
3.1/2
3.1/2
4.1/2
5“
5.5/8
6.1/8
6.3/8
d2
Ø
Inch
3/8
3/8
3/8
3/8
3/8
1/2
5/8
3/4
7/8
1“
427
911 - 917
Ɣ End Mill
Ɣ 2-flute, miniature, double end, regular length
911
Ŷ
Ɣ
d1
Ø
Inch
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
d1
decimal
Inch
0.0313
0.0469
0.0625
0.0781
0.0938
0.1094
0.1250
0.1406
0.1563
0.1719
0.1875
l2
Inch
3/32
9/64
3/16
15/64
9/32
21/64
3/8
13/32
7/16
1/2
1/2
d2
Ø
Inch
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
l1
Inch
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
# Flutes
2
2
2
2
2
2
2
2
2
2
2
EDP #
or
e-Code
5110714
5110489
5110490
5110491
5110492
5110493
5110494
5110495
5110496
5110497
5110498
917
Ɣ End Mill
Ɣ 4-flute, miniature, double end, regular length
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
428
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1563
0.1875
l2
Inch
3/16
9/32
3/8
7/16
1/2
l1
Inch
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
d2
Ø
Inch
3/16
3/16
3/16
3/16
3/16
# Flutes
4
4
4
4
4
EDP #
or
e-Code
5110537
5110538
5110539
5110540
5110541
919 - 883
Ɣ End Mill
Ɣ 4-flute, double end, miniature, long length
919
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1563
0.1875
l2
Inch
7/32
9/32
3/4
7/8
1“
d2
Ø
Inch
3/16
3/16
3/16
3/16
3/16
l1
Inch
2.1/2
2.5/8
3.1/8
3.1/4
3.3/8
# Flutes
4
4
4
4
4
EDP #
or
e-Code
5110546
5110547
5110548
5110549
5110550
883
Ɣ Corner Rounding Cutter
Ɣ Fraises concaves
Ɣ Fresas frontales de perfi l cóncavo
r
Ŷ
Ɣ
R
Inch
1/16
3/32
1/8
d1
Ø
Inch
7/16
1/2
5/8
d2
Ø
Inch
3/8
3/8
1/2
l1
Inch
2.1/2
2.1/2
3“
# Flutes
4
4
4
EDP #
or
e-Code
5110686
5110687
5110688
5/32
3/16
1/4
5/16
3/4
7/8
1.000
1.1/8
1/2
3/4
3/4
7/8
3“
3.1/8
3.1/4
3.1/2
4
4
4
4
5110689
5110690
5110691
5110692
3/8
7/16
1/2
1.1/4
1.3/8
1.1/2
7/8
1“
1“
3.3/4
4“
4.1/8
4
4
4
5110693
5110694
5110695
429
C191
Ɣ Slot Drill
Ɣ Fresas Frontales
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
1)
2)
d1
Ø
mm
1.50
1.59
1.98
2.00
2.38
2.50
2.78
3.00
3.18
3.50
3.57
3.97
4.00
4.37
4.50
4.76
5.00
5.16
5.50
5.56
5.95
6.00
6.35
6.50
6.75
7.00
7.14
7.50
7.54
7.94
8.00
8.33
8.50
8.73
9.00
9.13
d2
Ø
mm
6.00
6.35 - 1/4
6.35 - 1/4
6.00
6.35 - 1/4
6.00
6.35 - 1/4
6.00
6.35 - 1/4
6.00
6.35 - 1/4
6.35 - 1/4
6.00
6.35 - 1/4
6.00
6.35 - 1/4
6.00
6.35 - 1/4
6.00
6.35 - 1/4
6.35 - 1/4
6.00
6.35 - 1/4
10.00
9.53 - 3/8
10.00
9.53 - 3/8
10.00
9.53 - 3/8
9.53 - 3/8
10.00
9.53 - 3/8
10.00
9.53 - 3/8
10.00
9.53 - 3/8
l2
mm
2.5
2.5
2.5
3.0
4.5
4.5
6.5
7.0
7.0
7.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
12.5
12.5
12.5
14.5
14.5
14.5
14.5
14.5
l1
mm
48.5
48.5
49.0
49.0
51.0
51.0
51.0
51.0
51.0
52.5
52.5
52.5
52.5
52.5
52.5
52.5
52.5
55.5
55.5
55.5
56.5
56.5
56.5
58.5
59.5
58.5
58.5
58.5
58.5
59.5
59.5
59.5
60.5
60.5
60.5
60.5
#
Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Stock
No.
0412336
0412404
0413043
0412626
0412886
0412633
0413128
0412824
0412572
0412831
0413203
0413036
0412954
0412411
0412961
0412855
0412992
0412473
0413005
0413111
0412527
0413067
0412480
0413074
0412565
0413081
0413197
0413098
0412619
0413029
0413142
0412688
0413159
0412398
0413166
0412725
EDP #
or
e-Code
C1911.5
C1911/16
C1915/64
C1912.0
C1913/32
C1912.5
C1917/64
C1913.0
C1911/8
C1913.5
C1919/64
C1915/32
C1914.0
C19111/64
C1914.5
C1913/16
C1915.0
C19113/64
C1915.5
C1917/32
C19115/64
C1916.0
C1911/4
C1916.5
C19117/64
C1917.0
C1919/32
C1917.5
C19119/64
C1915/16
C1918.0
C19121/64
C1918.5
C19111/32
C1919.0
C19123/64
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
diameter tolerance -.0005 inches / -.0013 inches / tolérance sur le diamètre -.0005 inches / -.0013 inches / Tolerancia diámetro -.0005 pulgadas/ - .0013 pulgadas
diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas
430
C191
Ɣ Slot Drill
d1
Ø
Inch
3/8
25/64
13/32
27/64
7/16
29/64
31/64
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
13/16
7/8
15/16
1
1.1/16
1.1/8
1.1/4
1.1/4
1.3/8
1)
2)
d1
Ø
mm
9.50
9.53
9.92
10.00
10.32
10.50
10.72
11.00
11.11
11.50
11.51
12.00
12.30
12.70
13.00
13.49
14.00
14.29
15.00
15.08
15.88
16.00
16.67
17.00
17.46
18.00
18.26
19.00
19.05
20.00
20.64
21.00
22.00
22.23
23.00
23.81
24.00
25.00
25.40
26.00
26.99
27.00
28.00
28.58
29.00
30.00
31.75
31.75
32.00
34.00
34.93
35.00
36.00
38.00
d2
Ø
mm
10.00
9.53 - 3/8
9.53 - 3/8
10.00
9.53 - 3/8
12.00
12.70 - 1/2
12.00
12.70 - 1/2
12.00
12.70 - 1/2
12.00
12.70 - 1/2
12.70 - 1/2
12.00
12.70 - 1/2
12.00
12.70 - 1/2
16.00
15.88 - 5/8
15.88 - 5/8
16.00
15.88 - 5/8
16.00
15.88 - 5/8
16.00
15.88 - 5/8
16.00
15.88 - 5/8
16.00
25.40 - 1
25.00
25.00
25.40 - 1
25.00
25.40 - 1
25.00
25.00
25.40 - 1
25.00
25.40 - 1
25.00
25.00
25.40 - 1
25.00
25.00
25.40 - 1
31.75 - 1.1/4
25.00
25.00
25.40 - 1
25.00
25.00
25.00
l2
mm
14.5
14.5
16.0
14.5
16.0
17.5
17.5
17.5
17.5
17.5
17.5
19.0
19.0
19.0
19.0
22.0
22.0
21.5
22.0
22.0
22.0
22.0
24.0
24.0
24.0
24.0
25.5
25.5
25.5
25.5
25.4
25.5
25.5
25.5
25.5
25.5
25.5
27.0
27.0
27.0
28.5
28.5
30.0
30.0
30.0
30.0
38.0
35.0
38.0
38.0
39.5
39.5
39.5
43.0
Ɣ Fresas Frontales
l1
mm
60.5
60.5
60.5
60.5
60.5
65.0
65.0
65.0
65.0
65.0
65.0
66.5
66.5
66.5
66.5
68.5
68.5
69.0
72.0
72.0
72.0
72.0
73.0
74.0
74.0
74.0
75.5
77.0
77.0
77.0
98.5
98.5
100.0
100.0
101.5
103.0
103.0
95.0
95.0
95.0
93.5
93.5
95.0
95.0
93.5
93.5
101.5
117.5
101.5
101.5
103.0
103.0
103.0
106.5
#
Flutes
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Stock
No.
0413173
0412930
0412756
0412343
0412466
0412350
0412787
0412367
0413104
0412374
0412817
0412435
0412862
0412428
0412442
0412558
0412497
0413180
0412503
0412602
0413050
0412534
0412671
0412541
0412381
0412589
0412718
0412596
0412893
0412657
0412459
0412664
0412695
0413135
0412701
0412510
0412732
0412749
0412237
0412763
0412244
0412770
0412794
0412299
0412800
0412848
0412275
0412282
0412879
0412909
0412312
0412916
0412923
0412947
EDP #
or
e-Code
C1919.5
C1913/8
C19125/64
C19110.0
C19113/32
C19110.5
C19127/64
C19111.0
C1917/16
C19111.5
C19129/64
C19112.0
C19131/64
C1911/2
C19113.0
C19117/32
C19114.0
C1919/16
C19115.0
C19119/32
C1915/8
C19116.0
C19121/32
C19117.0
C19111/16
C19118.0
C19123/32
C19119.0
C1913/4
C19120.0
C19113/16
C19121.0
C19122.0
C1917/8
C19123.0
C19115/16
C19124.0
C19125.0
C1911
C19126.0
C1911.1/16
C19127.0
C19128.0
C1911.1/8
C19129.0
C19130.0
C1911.1/4X1
C1911.1/4X1.1/4
C19132.0X25.0
C19134.0X25.0
C1911.3/8X1
C19135.0X25.0
C19136.0X25.0
C19138.0X25.0
1)
1)
1)
1)
1)
1)
1)
1)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
431
C191 - C192
C191
d1
Ø
Inch
1.1/2
1.1/2
1.5/8
1.3/4
2“
2)
d1
Ø
mm
38.10
38.10
40.00
41.28
44.45
45.00
50.00
50.80
d2
Ø
mm
25.40 - 1
31.75 - 1.1/4
25.00
25.40 - 1
25.40 - 1
25.00
32.00
25.40 - 1
l1
l2
mm
43.0
43.0
46.0
47.5
51.0
51.0
51.0
57.0
#
Flutes
2
2
2
2
2
2
2
2
mm
106.5
114.5
111.0
112.5
116.0
116.0
117.5
122.0
EDP #
or
e-Code
C1911.1/2X1
C1911.1/2X1.1/4
C19140.0X25.0
C1911.5/8X1
C1911.3/4X1
C19145.0X25.0
C19150.0X32.0
C1912X1
Stock
No.
0412251
0412268
0412978
0412329
0412305
0412985
0413012
0412640
2)
2)
2)
2)
2)
C192
Ɣ Slot Drill
Ɣ Fresas Frontales
Ŷ
Ɣ
d1
Ø
Inch
1/16
d1
Ø
mm
1.59
2.00
3.00
1/8
3.18
5/32 3.97
4.00
3/16 4.76
5.00
6.00
1/4
6.35
6.50
7.00
9/32 7.14
7.50
5/16 7.94
8.00
8.50
11/32 8.73
9.00
3/8
9.53
10.00
13/32 10.32
11.00
7/16 11.11
12.00
1/2
12.70
1)
2)
d2
Ø
mm
6.35 - 1/4
6.0
6.0
6.35 - 1/4
6.35 - 1/4
6.0
6.35 - 1/4
6.0
6.0
6.35 - 1/4
10.0
10.0
9.53 - 3/8
10.0
9.53 - 3/8
10.0
10.0
9.53 - 3/8
10.0
9.53 - 3/8
10.0
9.53 - 3/8
12.0
12.7 - 1/2
12.0
12.7 - 1/2
l2
mm
4.5
4.0
11.0
11.0
12.5
12.5
12.5
12.5
16.0
16.0
16.0
16.0
16.0
16.0
19.0
19.0
22.0
22.0
22.0
22.0
22.0
22.2
22.0
22.0
25.5
25.5
l1
mm
51.0
51.0
60.5
63.5
70.0
66.5
70.0
70.0
76.0
76.0
76.0
76.0
76.0
76.0
79.5
79.5
82.5
82.5
82.5
82.5
82.5
89.0
89.0
89.0
95.0
95.0
#
Flt
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Stock
No.
0413289
0413418
0413487
0413388
0413562
0413531
0413500
0413548
0413586
0413333
0413593
0413609
0413685
0413616
0413555
0413647
0413654
0413272
0413661
0413524
0413258
0413326
0413265
0413623
0413302
0413296
EDP #
or
e-Code
C1921/16
C1922.0
C1923.0
C1921/8
C1925/32
C1924.0
C1923/16
C1925.0
C1926.0
C1921/4
C1926.5
C1927.0
C1929/32
C1927.5
C1925/16
C1928.0
C1928.5
C19211/32
C1929.0
C1923/8
C19210.0
C19213/32
C19211.0
C1927/16
C19212.0
C1921/2
d1
Ø
Inch
5/8
d1
Ø
mm
13.00
14.00
14.29
15.00
15.88
3/4
16.00
17.00
18.00
19.00
19.05
1)
9/16
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
20.00
22.00
7/8
22.23
24.00
25.00
1“
25.40
26.00
28.00
30.00
1.1/8 28.58
1.1/4 31.75
1.1/2 38.10
d2
Ø
mm
12.0
12.0
12.7 - 1/2
16.0
15.88 5/8
16.0
16.0
16.0
16.0
15.88 5/8
16.0
25.0
25.4 - 1
25.0
25.0
25.4 - 1
25.0
25.0
25.0
25.4 - 1
25.4 - 1
25.4 - 1
l2
l1
Stock
No.
0413319
0413340
0413678
0413357
0413579
EDP #
or
e-Code
C19213.0
C19214.0
C1929/16
C19215.0
C1925/8
mm
25.5
28.5
28.5
31.5
31.5
mm
95.0
101.5
101.5
108.0
108.0
#
Flt
2
2
2
2
2
31.5
35.0
35.0
38.0
38.0
108.0
114.5
114.5
120.5
120.7
2
2
2
2
2
0413364
0413371
0413395
0413401
0413517
C19216.0
C19217.0
C19218.0
C19219.0
C1923/4
38.0
41.5
41.5
41.5
44.5
44.5
44.5
47.5
51.0
47.5
51.0
57.0
120.5
140.0
139.7
152.5
159.0
159.0
159.0
159.0
159.0
159.0
159.0
159.0
2
2
2
2
2
2
2
2
2
2
2
2
0413425
0413432
0413630
0413449
0413456
0413210
0413463
0413470
0413494
0413241
0413234
0413227
C19220.0
C19222.0
C1927/8
C19224.0
C19225.0
C1921
C19226.0
C19228.0
C19230.0
C1921.1/8
C1921.1/4X1
C1921.1/2X1
2)
2)
2)
2)
2)
2)
2)
2)
1)
432
C291
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
1/4
5/16
3/8
13/32
7/16
1/2
9/16
5/8
1)
d1
Ø
mm
1.59
2.00
2.38
2.50
3.00
3.18
3.50
3.97
4.00
4.50
4.76
5.00
5.50
6.00
6.35
6.50
7.00
7.50
7.94
8.00
8.50
9.00
9.50
9.53
10.00
10.32
10.50
11.00
11.11
12.00
12.70
13.00
14.00
14.29
15.00
15.88
l2
mm
2.5
3.0
6.5
6.5
9.5
9.5
12.5
12.5
12.5
12.5
12.5
16.0
16.0
16.0
16.0
16.0
15.0
18.0
18.0
18.0
21.0
21.0
21.0
21.0
21.0
22.5
19.0
19.0
19.0
24.0
24.0
24.5
28.5
28.5
26.5
26.5
d2
Ø
mm
6.35 - 1/4
6.0
6.35 - 1/4
6.0
6.0
6.35 - 1/4
6.0
6.35 - 1/4
6.0
6.0
6.35 - 1/4
6.0
6.0
6.0
6.35 - 1/4
10.0
10.0
10.0
9.53 - 3/8
10.0
10.0
10.0
10.0
9.53 - 3/8
10.0
9.53 - 3/8
10.0
12.0
12.7 - 1/2
12.0
12.7 - 1/2
12.0
12.0
12.7 - 1/2
16.0
15.88 - 5/8
l1
mm
48.5
49.0
51.0
51.0
54.0
54.0
57.0
57.0
57.0
57.0
57.0
60.5
60.5
60.5
60.5
60.5
60.5
63.5
63.5
63.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
66.5
70.0
70.0
70.0
73.0
73.0
77.0
77.0
#
Flutes
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Stock
No.
0413791
0413920
0414095
0413937
0414040
0413890
0414057
0414255
0414163
0414170
0414071
0414217
0414224
0414279
0413845
0414286
0414293
0414309
0414248
0414330
0414347
0414354
0414361
0414149
0413760
0413838
0413777
0413784
0414316
0413814
0413807
0413821
0413852
0414378
0413869
0414262
EDP #
or
e-Code
C2911/16
C2912.0
C2913/32
C2912.5
C2913.0
C2911/8
C2913.5
C2915/32
C2914.0
C2914.5
C2913/16
C2915.0
C2915.5
C2916.0
C2911/4
C2916.5
C2917.0
C2917.5
C2915/16
C2918.0
C2918.5
C2919.0
C2919.5
C2913/8
C29110.0
C29113/32
C29110.5
C29111.0
C2917/16
C29112.0
C2911/2
C29113.0
C29114.0
C2919/16
C29115.0
C2915/8
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
diameter tolerance +.0025 inches / -.0005 inches / tolérance sur le diamètre +.0025 inches / -.0005 inches / Tolerancia diámetro + .0025 pulgadas/ -.0005 pulgadas
433
C291
d1
Ø
Inch
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
1.5/8
1.3/4
2“
2“
1)
2)
d1
Ø
mm
16.00
17.00
18.00
19.00
19.05
20.00
21.00
22.00
22.23
23.00
24.00
25.00
25.40
26.00
28.00
28.58
30.00
31.75
32.00
34.00
34.93
35.00
36.00
38.00
38.10
40.00
41.28
42.00
44.45
45.00
50.00
50.80
50.80
l2
mm
26.5
32.0
35.0
38.0
38.0
38.0
38.0
41.5
41.5
41.5
41.5
44.5
43.0
43.0
46.0
46.0
46.0
49.0
49.0
49.0
52.5
52.5
52.5
55.5
55.5
58.5
60.5
60.5
63.5
63.5
65.0
70.0
65.0
d2
Ø
mm
16.0
16.0
16.0
16.0
15.88 - 5/8
16.0
25.0
25.0
25.4 - 1
25.0
25.0
25.0
25.4 - 1
25.0
25.0
25.4 - 1
25.0
25.4 - 1
25.0
25.0
25.4 - 1
25.0
25.0
25.0
25.4 - 1
25.0
25.4 - 1
25.0
25.4 - 1
25.0
32.0
25.4 - 1
31.75 - 1.1/4
l1
mm
77.0
80.0
80.0
83.5
83.5
83.5
95.0
98.5
98.5
98.5
98.5
101.5
101.5
101.5
104.5
104.5
104.5
108.0
108.0
108.0
111.0
111.0
111.0
114.5
114.5
117.5
117.5
117.5
120.5
120.5
127.0
127.0
127.0
#
Flutes
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
Stock
No.
0413876
0413883
0413906
0413913
0414101
0413968
0413975
0413982
0414323
0413999
0414002
0414019
0413692
0414026
0414033
0413722
0414064
0413715
0414088
0414118
0413746
0414125
0414132
0414156
0413708
0414187
0413753
0414194
0413739
0414200
0414231
0413944
0413951
EDP #
or
e-Code
C29116.0
C29117.0
C29118.0
C29119.0
C2913/4
C29120.0
C29121.0
C29122.0
C2917/8
C29123.0
C29124.0
C29125.0
C2911
C29126.0
C29128.0
C2911.1/8
C29130.0
C2911.1/4X1
C29132.0X25.0
C29134.0X25.0
C2911.3/8X1
C29135.0X25.0
C29136.0X25.0
C29138.0X25.0
C2911.1/2X1
C29140.0X25.0
C2911.5/8X1
C29142.0X25.0
C2911.3/4X1
C29145.0X25.0
C29150.0X32.0
C2912X1
C2912X1.1/4
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
2)
2)
2)
2)
2)
2)
2)
2)
diameter tolerance +0.005 inches / 0 / tolérance sur le diamètre +.0005 inches / 0 / Tolerancia diámetro + 0.0055 pulgadas/ -.0
434
C292
Ɣ End Mill
Ŷ
Ɣ
d1
Ø
Inch
1/16
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1“
1.1/8
1.1/4
1.1/2
1)
d1
Ø
mm
1.59
3.00
3.18
3.50
4.00
4.50
4.76
5.00
6.00
6.35
7.00
7.14
7.94
8.00
9.00
9.53
10.00
11.00
11.11
12.00
12.70
13.00
14.00
14.29
15.00
15.88
16.00
17.00
18.00
19.00
19.05
20.00
22.00
22.23
24.00
25.00
25.40
28.58
30.00
31.75
32.00
38.10
l2
mm
4.5
19.0
19.0
25.5
25.5
25.5
25.5
31.5
31.5
31.5
34.0
34.0
34.0
34.0
37.0
37.0
37.0
41.5
41.5
49.5
49.5
50.0
57.0
57.0
58.5
58.5
58.5
67.0
70.0
76.0
76.0
76.0
85.5
85.5
92.0
100.0
d2
Ø
mm
6.35 - 1/4
6.0
6.35 - 1/4
6.0
6.0
6.0
6.35 - 1/4
6.0
6.0
6.35 - 1/4
10.0
9.53 - 3/8
9.53 - 3/8
10.0
10.0
9.53 - 3/8
10.0
12.0
12.7 - 1/2
12.0
12.7 - 1/2
12.0
12.0
12.7 - 1/2
16.0
15.88 - 5/8
16.0
16.0
16.0
16.0
15.88 - 5/8
16.0
25.0
25.4 - 1
25.0
25.0
100.0
98.5
98.5
100.0
100.0
100.0
25.4 - 1
25.4 - 1
25.0
25.4 - 1
25.0
25.4 - 1
l1
mm
51.0
63.5
63.5
70.0
70.0
70.0
70.0
76.0
76.0
76.0
79.5
79.5
79.5
79.5
82.5
82.5
82.5
89.0
89.0
95.0
95.0
95.0
101.5
101.5
108.5
108.5
108.5
115.0
115.0
121.5
121.5
121.5
143.0
143.0
149.0
157.0
#
Flutes
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
Stock
No.
0414446
0414606
0414538
0414613
0414675
0414682
0414637
0414699
0414729
0414484
0414736
0414798
0414705
0414767
0414774
0414668
0414422
0414439
0414743
0414460
0414453
0414477
0414491
0414781
0414507
0414712
0414514
0414521
0414545
0414552
0414651
0414569
0414576
0414750
0414583
0414590
EDP #
or
e-Code
C2921/16
C2923.0
C2921/8
C2923.5
C2924.0
C2924.5
C2923/16
C2925.0
C2926.0
C2921/4
C2927.0
C2929/32
C2925/16
C2928.0
C2929.0
C2923/8
C29210.0
C29211.0
C2927/16
C29212.0
C2921/2
C29213.0
C29214.0
C2929/16
C29215.0
C2925/8
C29216.0
C29217.0
C29218.0
C29219.0
C2923/4
C29220.0
C29222.0
C2927/8
C29224.0
C29225.0
157.0
157.0
157.0
159.0
159.0
159.0
6
6
6
6
6
6
0414385
0414415
0414620
0414408
0414644
0414392
C2921
C2921.1/8
C29230.0
C2921.1/4X1
C29232.0X25.0
C2921.1/2X1
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
435
C391 - C392
Ɣ Slot Drill
Ɣ Fresas Frontales
C391
Ŷ
Ɣ
d1
d1
Ø
Ø
Inch mm
6.00
1/4
6.35
8.00
3/8
9.53
10.00
12.00
1/2
12.70
14.00
d2
Ø
mm
6
6.35 - 1/4
10
9.53 - 3/8
10
12
12.7 - 1/2
12
l2
l1
mm
16.0
16.0
18.0
21.0
21.0
24.0
24.0
28.5
mm
60.5
60.5
63.5
66.5
66.5
70.0
70.0
73.0
#
Flt
3
3
3
3
3
3
3
3
EDP #
or
e-Code
C3916.0
C3911/4
C3918.0
C3913/8
C39110.0
C39112.0
C3911/2
C39114.0
Stock
No.
0414934
0414842
0414958
0414910
0414811
0414835
0414828
0414859
d1
Ø
Inch
5/8
d1
Ø
mm
15.88
3/4
16.00
18.00
19.05
1)
1)
1)
7/8
1“
1)
2)
20.00
22.23
25.00
25.40
d2
Ø
mm
15.88 5/8
16
16
15.88 5/8
16
25.4 - 1.
25
25.4 - 1.
l2
l1
mm mm
27.0 77.0
EDP #
# Stock
or
Flt No.
e-Code
3 0414927 C3915/8
26.5 77.0
33.0 80.0
38.0 83.5
3
3
3
0414866 C39116.0
0414873 C39118.0
0414903 C3913/4
38.0
35.0
40.0
40.0
3
3
3
3
0414880
0414941
0414897
0414804
83.5
98.5
101.5
101.5
C39120.0
C3917/8
C39125.0
C3911
2)
2)
2)
2)
C392
Ɣ Slot Drill
Ɣ Fraises à rainure
Ɣ Fresas Frontales
Ŷ
Ɣ
d1
Ø
mm
6.00
8.00
10.00
12.00
436
d2
Ø
mm
6
10
10
12
l2
mm
31.5
34.0
37.0
49.5
l1
mm
76.0
79.5
82.5
95.0
#
Flutes
3
3
3
3
Stock
No.
0415023
0415030
0414965
0414972
EDP #
or
e-Code
C3926.0
C3928.0
C39210.0
C39212.0
d1
Ø
mm
14.00
16.00
18.00
20.00
d2
Ø
mm
12
16
16
16
l2
mm
57.0
58.5
67.5
76.0
l1
mm
101.5
108.5
115.0
121.5
#
Flutes
3
3
3
3
Stock
No.
0414989
0414996
0415009
0415016
EDP #
or
e-Code
C39214.0
C39216.0
C39218.0
C39220.0
Table of Contents
Reamers, Counterbores, Countersinks, Miscellaneous
Style
Reamers
4533
4533S
4535
4543
4500
4531
4587
4591
4588
4600
4537
4536
4532
4579
4608
SS300
SS400
T400
Counterbores
4702
4703
4706
4700
4705
4704
Countersinks
4602
4603
G135
G136
G137
G138
G154
Miscellaneous
411
430
707, 727, 757
1800, 1815, 1816
1900
Description
# of Flutes
Chucking, Straight Flute
Chucking Set, Straight Flute
Chucking, Right-Hand Spiral
Chucking, Left-Hand Spiral
Hand Reamer, Straight Flute
Chucking, Expansion
Taper Pin, Straight Flute
Taper Pin, Left-Hand Spiral
Taper Pin, Left-Hand, High Spiral
Taper Pipe, Left-Hand Spiral
Chucking, R.H. Spiral, R.H. Cut
Chucking, Straight Flute, R.H. Cut
Chucking, Expansion
Bridge, Spiral Flute, R.H. Cut
Center, Straight Shank
Core Drill
Core Drill
Core Drill
Short, Straight Shank
Short, Taper Shank
Aircraft Short, Reduced Shank
Long, Straight Shank
Aircraft Long, Straight Shank
Counterbore Pilots
60° and 82° Included Angles
60°, 82° ,90° Included Angles
60° Included Angle
90° Included Angle
60° Included Angle
90° Included Angle
82° Included Angle
Drift Keys
Drill Sleeves
Tool Bit Blanks
Screw Extractor Sets
Cutting Oil
4
N//A
4
4
Multi
Multi
Multi
Multi
Multi
Multi
Multi
Multi
Multi
N//A
N/A
3
4
4
N//A
N//A
N//A
N//A
N//A
N//A
4
Single
3
3
3
3
3
N//A
N//A
N//A
N//A
N//A
Finish
Page No.
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Bright
Surface Treated
443
446
447
448
449
450
451
451
452
452
453
454
455
456
456
457
457
458
Bright
Bright
Bright
Bright
Bright
Bright
459
460
461
461
462
463
Bright
Bright
Bright
Bright
Bright
Bright
Bright
464
465
465
466
466
467
467
Surface Treated
Surface Treated
N//A
Bright
N//A
468
468
468
468
468
437
Feed Rate Chart
1. Find your Alpha Code on the AMG Chart (example: 82 C : C is the Alpha Code) .
2. Find the closest diameter for your cutting application on the chart to find your IPR.
Reamers
Alpha
Code
1/16
5/64
1/8
3/16
5/16
25/64
1/2
5/8
25/32
1”
1-13/16
1-1/2
2”
A
0.002
0.002
0.003
0.004
0.006
0.007
0.007
0.009
0.010
0.011
0.013
0.015
0.017
Reamers - Feed in Inches per Revolution
B
0.002
0.003
0.004
0.006
0.007
0.008
0.009
0.011
0.012
0.014
0.016
0.020
0.022
C
0.003
0.003
0.005
0.007
0.009
0.010
0.011
0.013
0.015
0.017
0.019
0.024
0.027
D
0.031
0.004
0.006
0.008
0.011
0.013
0.014
0.016
0.019
0.021
0.024
0.029
0.033
E
0.004
0.006
0.007
0.010
0.014
0.015
0.017
0.020
0.021
0.025
0.030
0.036
1.043
F
0.006
0.007
0.010
0.014
0.017
0.020
0.022
0.025
0.028
0.031
0.037
1.047
1.059
1.5
2
3
40
50
Alpha
Code
Reamers - Feed in MM per Revolution
5
8
10
12
16
20
Ø Diameter
25
30
A
0.045
0.055
0.078
0.100
0.150
0.170
0.185
0.220
0.250
0.280
0.320
0.390
0.440
B
0.055
0.072
0.110
0.150
0.180
0.210
0.240
0.280
0.310
0.360
0.400
0.500
0.550
C
0.065
0.085
0.135
0.185
0.220
0.260
0.285
0.335
0.390
0.440
0.480
0.600
0.680
D
0.080
0.110
0.160
0.200
0.270
0.320
0.360
0.410
0.470
0.540
0.600
0.730
0.850
E
0.100
0.140
0.180
0.250
0.350
0.390
0.430
0.500
0.530
0.640
0.750
0.910
1.100
F
0.140
0.180
0.260
0.350
0.440
0.500
0.550
0.630
0.700
0.800
0.930
1.200
1.500
mm/REV ± 15%
438
Ø Diameter
Feed Rate Charts
1. Find your Alpha Code on the AMG Chart (example: 82 C : C is the Alpha Code) .
2. Find the closest diameter for your cutting application on the chart to find your IPR.
Countersinks, Counterbores
Alpha
Code
Countersinks, Counterbores - Feed in Inches per Revolution
Ø Diameter
1/4
5/16
5/64
5/8
25/32
1”
1-1/4
1-1/2
2-3/8
3”
0.006
A
0.001
0.002
0.002
0.002
0.003
0.004
0.004
0.005
0.006
B
0.002
0.002
0.002
0.003
0.004
0.005
0.006
0.006
0.007
0.008
C
0.002
0.002
0.003
0.004
0.005
0.006
0.006
0.007
0.008
0.009
D
0.002
0.003
0.004
0.005
0.006
0.007
0.008
0.009
0.010
0.011
E
0.003
0.004
0.005
0.006
0.007
0.008
0.010
0.011
0.012
0.013
F
0.004
0.004
0.005
0.006
0.007
0.008
0.010
0.011
0.013
0.014
G
0.004
0.005
0.006
0.007
0.008
0.009
0.011
0.013
0.014
0.016
H
0.005
0.006
0.007
0.008
0.009
0.010
0.012
0.014
0.016
0.018
Alpha
Code
A
Countersinks, Counterbores - Feed in MM per Revolution
Ø Diameter
6
8
10
16
20
25
32
40
60
80
0.03
0.04
0.05
0.06
0.08
0.09
0.10
0.12
0.14
0.16
B
0.04
0.05
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
C
0.05
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
D
0.06
0.08
0.10
0.12
0.15
0.18
0.20
0.22
0.25
0.28
E
0.08
0.10
0.12
0.15
0.18
0.20
0.25
0.27
0.30
0.32
F
0.09
0.11
0.13
0.16
0.19
0.21
0.26
0.29
0.33
0.36
G
0.10
0.12
0.15
0.18
0.20
0.22
0.28
0.32
0.36
0.40
H
0.12
0.15
0.18
0.20
0.22
0.25
0.30
0.35
0.40
0.45
439
Reamers
4533
4535
4543
4500
Reamers, Counterbores
AMG Chart below.
2 Use the icons to find other Product Features.
4 To calculate IPR, refer to chart on page 438-439.
example:
82 C
Ŷ
Ɣ
82 = SFM
C = Alpha Code to find your Feed Rate
2
Coating:
Icon Guide for Reamers,
Counterbores and
Countersinks
Standard:
Direction of Cut:
Shank:
Straight
Shank
Taper
Shank
Shank with Shank with
Tang
Square End
Reamers
Countersink Counterbore
Application Application
Square
Shank
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
440
Hardness
HB
1
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
3
443
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
447
448
449
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ20B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ20B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ20B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ20B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Reamers and Counterbores
4531
4587
4591
4588
4600
4537
4536
4579
4532
4608
SS300
SS400
T400
4702
Short
4703
Short
4706
Short
4700, 4705
Long
Counterbore Pilot,
4704, Page 463
459
460
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ59C
Ŷ46C
Ŷ36C
Ŷ33B
Ɣ16B
Ɣ13A
Ŷ59C
Ŷ46C
Ŷ36C
Ŷ33B
Ɣ16B
Ɣ13A
Ŷ59C
Ŷ46C
Ŷ36C
Ŷ33B
Ɣ16B
Ɣ13A
Ŷ59C
Ŷ46C
Ŷ36C
Ŷ33B
Ɣ16B
Ɣ13A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ59C
Ŷ82C
Ŷ46C
Ŷ66C
Ŷ36C
Ŷ52C
Ŷ33B
Ŷ49B
Ɣ16B
Ɣ30B
Ɣ13A
Ɣ16A
Ŷ98F
Ŷ82E
Ŷ66D
Ŷ49D
Ŷ33B
Ɣ20A
Ŷ75C
Ŷ46C
Ŷ49C
Ŷ49B
Ɣ36B
Ŷ75F
Ŷ46F
Ŷ49F
Ŷ49D
Ɣ36D
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ20B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ŷ26C
Ɣ16B
Ɣ20B
Ŷ26C
Ŷ26C
Ŷ36C
Ɣ20B
Ɣ26B
Ŷ36C
Ɣ20B
Ɣ26B
Ŷ36C
Ɣ20B
Ɣ26B
Ŷ36C
Ɣ20B
Ɣ26B
Ŷ108E
Ŷ59D
Ŷ59C
Ŷ108E
Ŷ59H
Ŷ59F
Ŷ69C
Ɣ36B
Ŷ69F
Ɣ36D
Ɣ49D
Ɣ49D
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ɣ69B
Ɣ69B
Ɣ69B
Ɣ26C
Ɣ20B
Ɣ13A
Ɣ13A
Ɣ82F
Ɣ49D
Ɣ39C
Ɣ26C
Ŷ39C
Ŷ33A
Ŷ26A
Ŷ39C
Ŷ20B
Ŷ13A
Ŷ82D
Ŷ66F
Ŷ82F
Ɣ33D
Ɣ98G
Ɣ82F
Ɣ66F
Ɣ33F
Ɣ98G
Ɣ66G
Ŷ36C
Ɣ20B
Ɣ26B
Ŷ46E
Ɣ36D
Ɣ33C
Ɣ30C
Ŷ36C
Ɣ16B
Ɣ13B
Ɣ16D
Ɣ
Ɣ
Ɣ59D
Ŷ66E
Ɣ59D
Ɣ36D
Ɣ75F
Ɣ59F
Ŷ26C
Ŷ36C
Ɣ16B
Ɣ20B
Ɣ20B
Ɣ26B
Ɣ20B
Ŷ46E
Ɣ52E
Ɣ36D
Ɣ49D
Ɣ33C
Ɣ43C
Ɣ30C
Ɣ36C
Ŷ36C
Ɣ49C
Ɣ16B
Ŷ30B
Ɣ13B
Ɣ16B
Ɣ16D
Ŷ26D
Ɣ Ɣ16C
Ɣ Ɣ10C
Ɣ59D
Ɣ82D
Ŷ66E
Ɣ92E
Ɣ59D
Ɣ82D
Ɣ36D
Ɣ46D
Ɣ75F
Ɣ59F
Ɣ49E
Ɣ46D
Ŷ66F
Ɣ39D
Ɣ39D
Ŷ46E
Ɣ36D
Ɣ33C
Ɣ30C
Ŷ36C
Ɣ16B
Ɣ13B
Ɣ16D
Ɣ
Ɣ
Ɣ59D
Ŷ66E
Ɣ59D
Ɣ36D
Ɣ75F
Ɣ59F
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ20B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
Ŷ66C
Ɣ39B
Ɣ39B
Ŷ46E
Ɣ36D
Ɣ33C
Ɣ30C
Ŷ36C
Ɣ16B
Ɣ13B
Ɣ16D
Ɣ
Ɣ
Ɣ59D
Ŷ66E
Ɣ59D
Ɣ36D
Ɣ75F
Ɣ59F
Ɣ49E
Ɣ46D
Ŷ26C
Ɣ16B
Ɣ20B
Ɣ20B
Ŷ46E
Ɣ36D
Ɣ33C
Ɣ30C
Ŷ36C
Ɣ16B
Ɣ13B
Ɣ16D
Ɣ
Ɣ
Ɣ59D
Ŷ66E
Ɣ59D
Ɣ36D
Ɣ75F
Ɣ59F
Ɣ49E
Ɣ46D
450
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
451
451
452
452
Ɣ69B
453
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ŷ49C
Ɣ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
454 456
455
Ɣ69B
456
457
458
461
461
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
441
Reamers
Countersinks
4602
4-Flute
Style:
4603
1-Flute
G135-G138
3-Flute
G154
3-Flute
Material:
AMG Chart below.
2 Use the icons to find other Product Features.
4 To calculate IPR, refer to chart on page 438-439.
example:
82 C
Ŷ
Ɣ
82 = SFM
C = Alpha Code to find your Feed Rate
2
Coating:
Icon Guide for Reamers,
Counterbores and
Countersinks
Standard:
Direction of Cut:
Application:
Countersink Counterbore
Application Application
Taper
Shank
Shank with Shank with
Tang
Square End
Countersinks
Straight
Shank
Shank:
Square
Shank
1.4 Alloy steel
1. Steel
2.Stainless
2.2 Austenitic
Steel
3.Cast Iron
4.Titanium
5.Nickel
5.2 Nickel, alloyed
5.3 Nickel, alloyed
6.1 Copper
6.Copper
6.3 Į-Brass
8.1 Thermoplastics
8.Synthetic
Materials
9.Hard Mat.
10.Graphite
442
Hardness
HB
1
12L14, 12L15
1005-1025, 1214, 1215, A36
1030-1060, 1050-1060, 1144-1146
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
A2-D2, H10-H41, L1-L6, M1-M42, T1
A2-D2, H10-H41, L1-L6, M1-M42, T1
200, 303, 416, 420F, 430F, 440
301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
Commercially Pure
6A14V-4Mo, 7A14V-4Mo, 4911-4967
Commercially Pure
314-340, 350-370
Ampco 18-25
Commercially Pure
6061 T6, 7075, 314-340
6061 T6, 380-390
Ultramid, Polystrol
Bakelit, Pertinax
CFK, GFKAFK
Ferrotic
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
------<550
---
3
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
464
465
Ŷ98F
Ŷ82E
Ŷ66D
Ŷ49D
Ŷ33B
Ɣ20A
Ŷ98F
Ŷ82E
Ŷ66D
Ŷ49D
Ŷ33B
Ɣ20A
Ŷ98F
Ŷ82E
Ŷ66D
Ŷ49D
Ŷ33B
Ɣ20A
465
Ŷ98F
Ŷ82E
Ŷ66D
Ŷ49D
Ŷ33B
Ɣ20A
467
Ɣ26C
Ɣ20B
Ɣ13A
Ɣ26C
Ɣ20B
Ɣ13A
Ɣ26C
Ɣ20B
Ɣ13A
Ɣ26C
Ɣ20B
Ɣ13A
Ɣ82F
Ɣ49D
Ɣ39C
Ɣ26C
Ŷ39C
Ŷ33A
Ŷ26A
Ŷ39C
Ŷ20B
Ŷ13A
Ŷ82D
Ŷ66F
Ŷ82F
Ɣ33D
Ɣ98G
Ɣ82F
Ɣ66F
Ɣ33F
Ɣ98G
Ɣ66G
Ɣ82F
Ɣ49D
Ɣ39C
Ɣ26C
Ŷ39C
Ŷ33A
Ŷ26A
Ŷ39C
Ŷ20B
Ŷ13A
Ŷ82D
Ŷ66F
Ŷ82F
Ɣ33D
Ɣ98G
Ɣ82F
Ɣ66F
Ɣ33F
Ɣ98G
Ɣ66G
Ɣ82F
Ɣ49D
Ɣ39C
Ɣ26C
Ŷ39C
Ŷ33A
Ŷ26A
Ŷ39C
Ŷ20B
Ŷ13A
Ŷ82D
Ŷ66F
Ŷ82F
Ɣ33D
Ɣ98G
Ɣ82F
Ɣ66F
Ɣ33F
Ɣ98G
Ɣ66G
Ɣ82F
Ɣ49D
Ɣ39C
Ɣ26C
Ŷ39C
Ŷ33A
Ŷ26A
Ŷ39C
Ŷ20B
Ŷ13A
Ŷ82D
Ŷ66F
Ŷ82F
Ɣ33D
Ɣ98G
Ɣ82F
Ɣ66F
Ɣ33F
Ɣ98G
Ɣ66G
4533
Ɣ Chucking Reamer
Ɣ Right Hand Spiral Flute, Straight Flute
Ɣ Alésoirs machine
Ɣ Escariadores de máquina
Ŷ
Ɣ
d1
Ø
Inch
60
59
58
57
56
3/64
55
54
53
1/16
52
51
50
49
48
5/64
47
46
45
44
43
42
3/32
41
40
39
38
37
36
7/64
35
34
33
32
31
0.1230
d1
decimal
Inch
0.0400
0.0410
0.0420
0.0430
0.0465
0.0469
0.0520
0.0550
0.0595
0.0625
0.0635
0.0670
0.0700
0.0730
0.0760
0.0781
0.0785
0.0810
0.0820
0.0860
0.0890
0.0935
0.0938
0.0960
0.0980
0.0995
0.1015
0.1040
0.1065
0.1094
0.1100
0.1110
0.1130
0.1160
0.1200
0.1230
d2
Ø
Inch
0.0390
0.0390
0.0390
0.0390
0.0455
0.0455
0.0510
0.0510
0.0585
0.0585
0.0585
0.0660
0.0660
0.0660
0.0720
0.0720
0.0720
0.0771
0.0771
0.0810
0.0810
0.0880
0.0880
0.0928
0.0928
0.0928
0.0950
0.0950
0.1030
0.1030
0.1030
0.1055
0.1055
0.1120
0.1120
0.1120
l2
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
l1
Inch
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3“
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
EDP #
5010173
5010175
5010177
5010179
5010186
5010187
5010198
5010204
5010213
5010219
5010221
5010228
5010234
5010240
5010246
5010251
5010252
5010257
5010259
5010267
5010273
5010282
5010283
5010288
5010292
5010295
5010299
5010304
5010309
5010316
5010318
5010320
5010324
5010330
5010338
5010344
443
4533
d1
Ø
Inch
0.1240
0.1247
1/8
0.1260
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
11/64
17
16
15
14
13
0.1855
0.1865
0.1870
3/16
0.1885
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
A
15/64
B
C
D
0.2480
0.2490
0.2495
1/4
E
0.2510
F
G
17/64
444
d1
decimal
Inch
0.1240
0.1247
0.1250
0.1260
0.1285
0.1360
0.1400
0.1410
0.1440
0.1470
0.1495
0.1520
0.1540
0.1562
0.1570
0.1590
0.1610
0.1660
0.1695
0.1719
0.1730
0.1770
0.1800
0.1820
0.1850
0.1855
0.1865
0.1870
0.1875
0.1885
0.1890
0.1910
0.1935
0.1960
0.1990
0.2010
0.2031
0.2040
0.2055
0.2090
0.2130
0.2188
0.2210
0.2280
0.2340
0.2344
0.2380
0.2420
0.2460
0.2480
0.2490
0.2495
0.2500
0.2500
0.2510
0.2570
0.2610
0.2656
d2
Ø
Inch
0.1190
0.1190
0.1190
0.1190
0.1190
0.1275
0.1350
0.1350
0.1350
0.1430
0.1430
0.1460
0.1460
0.1510
0.1510
0.1530
0.1530
0.1595
0.1595
0.1645
0.1645
0.1700
0.1755
0.1755
0.1800
0.1800
0.1800
0.1800
0.1800
0.1800
0.1800
0.1860
0.1860
0.1895
0.1895
0.1945
0.1945
0.1945
0.2016
0.2016
0.2075
0.2075
0.2173
0.2173
0.2265
0.2265
0.2329
0.2329
0.2329
0.2329
0.2400
0.2400
0.2400
0.2400
0.2400
0.2485
0.2485
0.2485
l2
Inch
7/8
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1“
1“
1“
1“
1“
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
l1
Inch
3.1/2
3.1/2
3.1/2
3.1/2
3.1/2
4“
4“
4“
4“
4“
4“
4“
4“
4“
4“
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
4.1/2
5“
5“
5“
5“
5“
5“
5“
5“
5“
5“
5“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
# Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
EDP #
5010346
5010349
5010350
5010354
5010359
5010374
5010383
5010384
5010391
5010397
5010402
5010407
5010411
5010416
5010418
5010422
5010426
5010436
5010443
5010448
5010451
5010459
5010465
5010469
5010475
5010476
5010478
5010479
5010480
5010482
5010483
5010487
5010492
5010498
5010504
5010508
5010513
5010515
5010518
5010525
5010533
5010545
5010550
5010564
5010576
5010577
5010585
5010593
5010602
5010606
5010608
5010609
5010610
5011202
5010612
5010619
5010622
5010623
4533
d1
Ø
Inch
H
I
J
K
9/32
L
M
19/64
N
0.3100
0.3115
0.3120
5/16
0.3135
O
P
21/64
Q
R
11/32
S
T
23/64
U
0.3730
0.3740
0.3745
3/8
0.3760
V
W
25/64
X
Y
13/32
Z
27/64
0.4355
0.4365
0.4370
7/16
0.4385
29/64
15/32
31/64
0.4980
0.4990
0.4995
1/2
0.5010
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
d1
decimal
Inch
0.2660
0.2720
0.2770
0.2810
0.2812
0.2900
0.2950
0.2969
0.3020
0.3100
0.3115
0.3120
0.3125
0.3135
0.3160
0.3230
0.3281
0.3320
0.3390
0.3438
0.3480
0.3580
0.3594
0.3680
0.3730
0.3740
0.3745
0.3750
0.3760
0.3770
0.3860
0.3910
0.3970
0.4040
0.4062
0.4130
0.4219
0.4355
0.4365
0.4370
0.4375
0.4385
0.4531
0.4688
0.4844
0.4980
0.4990
0.4995
0.5000
0.5010
0.5156
0.5312
0.5469
0.5625
0.5781
0.5938
0.6094
0.6250
d2
Ø
Inch
0.2485
0.2485
0.2485
0.2485
0.2485
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.2792
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3105
0.3730
0.3730
0.3730
0.3730
0.3730
0.3730
0.3730
0.3730
0.3730
0.4355
0.4355
0.4355
0.4355
0.4355
0.4355
0.4355
0.4355
0.4355
0.4355
0.4355
0.4355
0.5620
0.5620
l2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
2“
2“
2“
2“
2“
2“
2“
2“
2“
2“
2“
2“
2.1/4
2.1/4
l1
Inch
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
6“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
7“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
8“
9“
9“
# Flutes
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
EDP #
5010624
5010626
5010627
5010628
5010629
5010630
5010631
5010632
5010633
5010636
5010638
5010639
5010640
5010642
5010645
5010647
5010648
5010649
5010650
5010651
5010652
5010653
5010654
5010655
5010658
5010659
5010660
5010661
5010662
5010663
5010665
5010666
5010667
5010668
5010670
5010671
5010672
5010673
5010674
5010675
5010676
5010677
5010678
5010679
5010680
5010681
5010682
5010683
5010684
5010685
5010690
5010691
5010692
5010693
5010694
5010695
5010696
5010698
445
4533 - 4533S
4533
d1
Ø
Inch
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
d1
decimal
Inch
0.6410
0.6562
0.6719
0.6875
0.7031
0.7188
0.7344
0.7500
0.7656
0.7812
0.7969
0.8125
0.8281
0.8438
0.8594
0.8750
0.8910
0.9062
0.9219
0.9375
0.9531
0.9688
0.9844
1.0000
1.0625
1.1250
1.1875
1.2500
1.3125
1.3750
1.4375
1.5000
d2
Ø
Inch
0.5620
0.5620
0.5620
0.5620
0.5620
0.5620
0.6245
0.6245
0.6245
0.6245
0.6245
0.6245
0.6245
0.6245
0.7495
0.7495
0.7495
0.7495
0.7495
0.7495
0.7495
0.7495
0.8745
0.8745
0.8745
0.8745
0.9995
0.9995
0.9995
0.9995
1.2495
1.2495
Ɣ Chucking Reamer Sets In Steel Cases
l2
Inch
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3.1/4
3.1/4
3.1/2
l1
Inch
9“
9“
9“
9“
9“
9“
9.1/2
9.1/2
9.1/2
9.1/2
9.1/2
9.1/2
9.1/2
9.1/2
10“
10“
10“
10“
10“
10“
10“
10“
10.1/2
10.1/2
10.1/2
11“
11“
11.1/2
11.1/2
12“
12“
12.1/2
Ɣ Coffret d’alésoirs machine
# Flutes
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
EDP #
5010700
5010701
5010702
5010703
5010704
5010705
5010706
5010708
5010710
5010711
5010712
5010713
5010714
5010715
5010716
5010717
5010718
5010719
5010720
5010721
5010722
5010723
5010724
5010725
5010726
5010727
5010728
5010729
5010103
5010731
5010105
5010733
Ɣ Juego de escariador de máquina en acero
cementado
4533S
Type
50
51
52
53
446
Style
4533
4533
4533
4533
#
in Set
29
14
60
26
Sizes
1/16-1/2 x 64ths
1/8-1/2 x 16ths, decimal 0.001“ over and 0.001“ under
N1 - N60
A-Z
EDP #
5011089
5011090
5011091
5011092
4535
Ɣ Chucking Reamer
Ɣ Right Hand Spiral Flute
Ŷ
Ɣ
d1
Ø
Inch
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
d1
decimal
Inch
0.0625
0.0781
0.0938
0.1094
0.1250
0.1410
0.1562
0.1719
0.1875
0.2031
0.2188
0.2344
0.2500
0.2656
0.2812
0.2969
0.3125
0.3281
0.3438
0.3594
0.3750
0.3910
0.4062
0.4219
0.4375
0.4531
0.4688
0.4844
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
d2
Ø
Inch
0.0585
0.0720
0.0880
0.1030
0.1190
0.1350
0.1510
0.1645
0.1800
0.1945
0.2075
0.2265
0.2400
0.2485
0.2485
0.2792
0.2792
0.2792
0.2792
0.3105
0.3105
0.3105
0.3105
0.3730
0.3730
0.3730
0.3730
0.4355
0.4355
0.4355
0.4355
0.4355
0.5620
0.5620
0.5620
0.5620
l2
Inch
1/2
3/4
3/4
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
2“
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
l1
Inch
2.1/2
3“
3“
3.1/2
3.1/2
4“
4“
4.1/2
4.1/2
5“
5“
6“
6“
6“
6“
6“
6“
6“
6“
7“
7“
7“
7“
7“
7“
7“
7“
8“
8“
8“
8“
8“
9“
9“
9“
9“
# Flutes
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
EDP #
5010054
5010055
5010056
5010057
5010058
5010059
5010060
5010061
5010062
5010063
5010064
5010065
5010066
5010067
5010068
5010069
5010070
5010071
5010072
5010073
5010074
5010075
5010076
5010077
5010078
5010079
5010080
5010081
5010082
5010083
5010084
5010085
5010086
5010087
5010088
5010089
447
4535 - 4543
4535
d1
Ø
Inch
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.3/8
1.1/2
d1
decimal
Inch
0.7500
0.7812
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
1.0625
1.1250
1.1875
1.2500
1.3750
1.5000
d2
Ø
Inch
0.6245
0.6245
0.6245
0.6245
0.7495
0.7495
0.7495
0.7495
0.8745
0.8745
0.8745
0.9995
0.9995
0.9995
1.2495
l2
Inch
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.7/8
2.7/8
3“
3.1/4
3.1/2
l1
Inch
9.1/2
9.1/2
9.1/2
9.1/2
10“
10“
10“
10“
10.1/2
10.1/2
11“
11“
11.1/2
12“
12.1/2
# Flutes
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
EDP #
5010090
5010091
5010092
5010093
5010094
5010095
5010096
5010097
5010098
5010099
5010100
5010101
5010102
5010104
5010106
4543
Ɣ Chucking Reamer
Ɣ Left Hand Spiral Flute
Ɣ Alésoirs machine LH hélicoidaux
Ɣ Escariadores de máquina estrias en
espiral LH
Ŷ
Ɣ
d1
Ø
Inch
1/16
3/32
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
448
d1
decimal
Inch
0.0625
0.0938
0.1250
0.1562
0.1875
0.2188
0.2500
0.2812
0.3125
0.3438
0.3750
0.4062
0.4375
0.4688
0.5000
d2
Ø
Inch
0.0585
0.0880
0.1190
0.1510
0.1800
0.2075
0.2400
0.2485
0.2792
0.2792
0.3100
0.3100
0.3730
0.3730
0.4355
l2
Inch
1/2
3/4
7/8
1“
1.1/8
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
2“
l1
Inch
2.1/2
3“
3.1/2
4“
4.1/2
5“
6“
6“
6“
6“
7“
7“
7“
7“
8“
# Flutes
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
EDP #
5010001
5010003
5010005
5010007
5010009
5010011
5010013
5010015
5010017
5010019
5010021
5010023
5010025
5010027
5010029
4500
Ɣ Hand Reamer
Ɣ Alésoir à main
Ɣ Escariador de mano
Ŷ
Ɣ
d1
Ø
Inch
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
7/8
1“
1.1/8
1.1/4
1.3/8
1.1/2
d1
decimal
Inch
0.1250
0.1562
0.1875
0.2187
0.2500
0.2813
0.3125
0.3437
0.3750
0.4062
0.4375
0.4688
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
0.8750
1.0000
1.1250
1.2500
1.3750
1.5000
l2
Inch
1.1/2
1.5/8
1.3/4
1.7/8
2“
2.1/8
2.1/4
2.3/8
2.1/2
2.5/8
2.3/4
2.7/8
3“
3.1/8
3.1/4
3.3/8
3.1/2
3.11/16
3.7/8
4.1/16
4.3/16
4.7/8
5.7/16
5.13/16
6.1/8
6.5/16
6.1/2
l1
Inch
3“
3.1/4
3.1/2
3.3/4
4“
4.1/4
4.1/2
4.3/4
5“
5.1/4
5.1/2
5.3/4
6“
6.1/4
6.1/2
6.3/4
7“
7.3/8
7.3/4
8.1/8
8.3/8
9.3/4
10.7/8
11.5/8
12.1/4
12.5/8
13
# Flutes
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
10
10
10
10
EDP #
5010928
5010929
5010930
5010931
5010932
5010933
5010934
5010935
5010936
5010937
5010938
5010939
5010940
5010941
5010942
5010943
5010944
5010945
5010946
5010947
5010948
5010950
5010952
5010953
5010954
5010955
5010956
449
4531
Ɣ Chucking Reamer, Expansion
Ŷ
Ɣ
d1
Ø
Inch
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1“
1.1/32
1.1/16
1.3/32
1.1/8
1.5/32
1.3/16
1.7/32
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
d
1
1.5/8
Ø
Inch
1.11/16
1.3/4
1.13/16
1.7/8
1.15/16
2“
450
d1
decimal
Inch
0.3750
0.4062
0.4375
0.4687
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
0.7812
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
1.0312
1.0625
1.0937
1.1250
1.1562
1.1875
1.2187
1.2500
1.3125
1.3750
1.4375
1.5000
1.5625
d1
1.6250
decimal
Inch
1.6875
1.7500
1.8125
1.8750
1.9375
2.0000
d2
Ø
Inch
5/16
5/16
3/8
3/8
7/16
7/16
7/16
7/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
1“
1“
1“
1“
1“
1.1/4
1.1/4
1.1/4
d2
1.1/4
Ø
Inch
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
l2
Inch
3/4
3/4
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.1/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
2“
2“
2.1/8
2.1/8
l2
2.1/4
Inch
2.1/4
2.3/8
2.3/8
2.1/2
2.1/2
2.1/2
l1
Inch
7“
7“
7“
7“
8“
8“
8“
8“
9“
9“
9“
9“
9.1/2
9.1/2
9.1/2
9.1/2
10“
10“
10“
10“
10.1/2
10.1/2
10.1/2
10.1/2
11“
11“
11“
11“
11.1/2
11.1/2
12“
12“
12.1/2
12.1/2
l1
13“
Inch
13“
13.1/2
13.1/2
14“
14“
14“
# Flutes
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
# Flutes
10
10
10
12
12
12
EDP #
5011204
5011205
5010778
5010779
5010780
5010781
5010782
5010783
5010784
5010785
5010786
5010787
5010788
5010789
5010790
5010791
5010792
5010793
5010794
5010795
5010796
5010797
5010798
5010799
5010800
5010801
5010802
5010803
5010804
5010805
5010806
5010807
5010808
5010809
EDP #
5010810
or
e-Code
5010811
5010812
5010813
5010814
5010815
5010816
4587 - 4591
Ɣ Taper Pin Reamer (Taper: 1/4” per foot)
Ɣ Alésoir machine cône morse conique
Ɣ Escariadores para pasadores cónicos
small
4587
Ŷ
Ɣ
nom
Ø
0
1
2
3
4
5
6
7
8
9
10
d1 small
Ø
Inch
0.1287
0.1447
0.1600
0.1813
0.2071
0.2410
0.2773
0.3297
0.3971
0.4800
0.5799
d1 large
Ø
Inch
0.1638
0.1798
0.201
0.2294
0.2600
0.2994
0.354
0.422
0.505
0.6066
0.7216
d2
Ø
Inch
11/64
3/16
13/64
15/64
17/64
5/16
23/64
13/32
7/16
9/16
5/8
l2
Inch
1.11/16
1.11/16
1.15/16
2.5/16
2.9/16
2.13/16
3.11/16
4.7/16
5.3/16
6.1/16
6.13/16
l1
Inch
2.15/16
2.15/16
3.3/16
3.11/16
4.1/16
4.5/16
5.7/16
6.5/16
7.3/16
8.5/16
9.5/16
# Flutes
6
6
6
6
6
6
6
6
6
8
8
EDP #
5011129
5011130
5011131
5011132
5011133
5011134
5011135
5011136
5011137
5011138
5011139
4591
Ɣ Taper Pin Reamer, Left Hand Spiral Flute
Ɣ (Taper: 1/4” per foot)
small
Ŷ
Ɣ
nom
Ø
0
1
2
3
4
5
6
7
8
9
10
d1 small
Ø
Inch
0.1287
0.1447
0.1600
0.1813
0.2071
0.2410
0.2773
0.3297
0.3971
0.4800
0.5799
d1 large
Ø
Inch
0.1638
0.1798
0.201
0.2294
0.2600
0.2994
0.354
0.422
0.505
0.6066
0.7216
d2
Ø
Inch
11/64
3/16
13/64
15/64
17/64
5/16
23/64
13/32
7/16
9/16
5/8
l2
l1
Inch
1.11/16
1.11/16
1.15/16
2.5/16
2.9/16
2.13/16
3.11/16
4.7/16
5.3/16
6.1/16
6.13/16
Inch
2.15/16
2.15/16
3.3/16
3.11/16
4.1/16
4.5/16
5.7/16
6.5/16
7.3/16
8.5/16
9.5/16
# Flutes
6
6
6
6
6
6
6
6
6
8
8
EDP #
5011146
5011147
5011148
5011149
5011150
5011151
5011152
5011153
5011154
5011155
5011156
451
4588 - 4600
small
4588
Ŷ
Ɣ
nom
Ø
d1 small
Ø
Inch
d1 large
Ø
Inch
d2
Ø
Inch
l2
Inch
l1
Inch
# Flutes
EDP #
7/0
6/0
5/0
4/0
3/0
2/0
0
1
2
3
4
5
6
7
8
9
10
0.0497
0.0611
0.0719
0.0869
0.1029
0.1137
0.1287
0.1447
0.1600
0.1813
0.2071
0.2410
0.2773
0.3297
0.3971
0.4800
0.5799
0.0666
0.0810
0.0966
0.1142
0.1300
0.1462
0.1638
0.1798
0.2010
0.2294
0.2600
0.2994
0.3540
0.4220
0.5050
0.6066
0.7216
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
15/64
17/64
5/16
23/64
13/32
7/16
9/16
5/8
13/16
15/16
1.3/16
1.5/16
1.5/16
1.9/16
1.11/16
1.11/16
1.15/16
2.5/16
2.9/16
2.13/16
3.11/16
4.7/16
5.3/16
6.1/16
6.13/16
1.13/16
1.15/16
2.3/16
2.5/16
5.5/16
2.9/16
5.15/16
2.15/16
3.3/16
3.11/16
4.1/16
4.5/16
5.7/16
6.5/16
7.3/16
8.5/16
9.5/16
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
5011157
5011158
5011159
5011160
5011161
5011162
5011163
5011164
5011165
5011166
5011167
5011168
5011169
5011170
5011171
5011172
5011173
4600
small
Ŷ
Ɣ
nom
Ø
Inch
d1 small
Ø
Inch
d1 large
Ø
Inch
d2
Ø
Inch
l2
Inch
l1
Inch
1/8
1/4
3/8
1/2
3/4
1“
1.1/4
1.1/2
2“
0.3160
0.4060
0.5400
0.6650
0.8760
1.1030
1.4440
1.6840
2.1590
0.3620
0.4720
0.6060
0.7510
0.9620
1.2120
1.5530
1.7930
2.2680
0.4375
0.5625
0.7000
0.6875
0.9063
1.1250
1.3125
1.5000
1.8750
3/4
1.1/16
1.1/16
1.3/8
1.3/8
1.3/4
1.3/4
1.3/4
1.3/4
2.1/8
2.7/16
2.9/16
3.1/8
3.1/4
3.3/4
4“
4.1/4
4.1/2
452
Square Size
mm
0.3280
0.4210
0.5310
0.5150
0.6790
0.8430
0.9840
1.1250
1.4060
# Flutes
EDP #
6
6
8
8
10
10
10
10
12
1810007
1810008
1810009
1810010
1810011
1810012
1810013
1810014
1810015
4537
Ɣ Chucking Reamer
Ɣ Taper Shank Right Hand Spiral Flute
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
d1
decimal
Inch
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8125
0.8750
0.9375
1.0000
1.0625
1.1250
1.1875
1.2500
1.3125
1.3750
1.4375
1.5000
MTS
1
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
l2
Inch
1.1/2
1.1/2
1.3/4
1.3/4
2“
2“
2.1/4
2.1/4
2.1/2
2.1/2
2.5/8
2.5/8
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3.1/4
3.1/4
3.1/2
l1
Inch
6“
6“
7“
7“
8“
8“
9“
9“
9.1/2
9.1/2
10“
10“
10.1/2
10.1/2
11“
11“
11.1/2
11.1/2
12“
12“
12.1/2
# Flutes
6
6
6
6
6
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
EDP #
5010140
5010142
5010144
5010146
5010148
5010150
5010152
5010154
5010156
5010158
5010160
5010162
5010164
5010165
5010166
5010167
5010168
5010169
5010170
5010171
5010172
453
4536
Ɣ Chucking Reamer
Ɣ Taper Shank
Ŷ
Ɣ
d1
Ø
Inch
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
454
d1
decimal
Inch
0.2500
0.2813
0.3125
0.3437
0.3750
0.4062
0.4375
0.4687
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
0.7812
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
1.0625
1.1250
1.1875
1.2500
1.3125
1.3750
1.4375
1.5000
MTS
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
l2
Inch
1.1/2
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
2“
2“
2“
2“
2.1/4
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.5/8
2.5/8
2.5/8
2.5/8
2.3/4
2.3/4
2.7/8
2.7/8
3“
3“
3.1/4
3.1/4
3.1/2
l1
Inch
6“
6“
6“
6“
7“
7“
7“
7“
8“
8“
8“
8“
9“
9“
9“
9“
9.1/2
9.1/2
9.1/2
9.1/2
10“
10“
10“
10“
10.1/2
10.1/2
11“
11“
11.1/2
11.1/2
12“
12“
12.1/2
# Flutes
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
EDP #
5010734
5010735
5010736
5010737
5010738
5010739
5010740
5010741
5010742
5010743
5010744
5010745
5010746
5010747
5010748
5010749
5010750
5010751
5010752
5010753
5010754
5010755
5010756
5010757
5010758
5010759
5010760
5010761
5010762
5010763
5010764
5010765
5010766
4532
Ɣ Chucking Reamer
Ɣ Taper Shank Expansion
Ŷ
Ɣ
d1
Ø
Inch
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1“
1.1/32
1.1/16
1.3/32
1.1/8
1.5/32
1.3/16
1.7/32
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.5/8
d1
1.3/4
Ø
Inch
1.7/8
2“
2.1/8
2.1/4
2.3/8
2.1/2
d1
decimal
Inch
0.3750
0.4062
0.4375
0.4687
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
0.7812
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
1.0312
1.0625
1.0937
1.1250
1.1562
1.1875
1.2187
1.2500
1.3125
1.3750
1.4375
1.5000
1.6250
d1
1.7500
decimal
Inch
1.8750
2.0000
2.1250
2.2500
2.3750
2.5000
MTS
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
5
MTS
5
5
5
5
5
5
l2
Inch
3/4
3/4
7/8
7/8
1“
1“
1.1/8
1.1/8
1.1/4
1.1/4
1.1/4
1.1/4
1.3/8
1.3/8
1.3/8
1.3/8
1.1/2
1.1/2
1.1/2
1.1/2
1.5/8
1.5/8
1.5/8
1.5/8
1.3/4
1.3/4
1.3/4
1.3/4
1.7/8
1.7/8
2“
2“
2.1/8
l2.1/4
2
2.3/8
Inch
2.1/2
2.1/2
2.1/4
2.1/4
3“
3“
l1
Inch
7“
7“
7“
7“
8“
8“
8“
8“
9“
9“
9“
9“
9.1/2
9.1/2
9.1/2
9.1/2
10“
10“
10“
10“
10.1/2
10.1/2
10.1/2
10.1/2
11“
11“
11“
11“
11.1/2
11.1/2
12“
12“
12.1/2
13“
l1
13.1/2
Inch
14“
14“
14.1/2
14.1/2
15
15
# Flutes
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
# Flutes
12
12
12
12
12
12
EDP #
5011206
5011207
5010820
5010821
5010822
5010823
5010824
5010825
5010826
5010827
5010828
5010829
5010830
5010831
5010832
5010833
5010834
5010835
5010836
5010837
5010838
5010839
5010840
5010841
5010842
5010843
5010844
5010845
5010846
5010847
5010848
5010849
5010850
5010852
EDP #
5010854
or
e-Code
5010856
5010858
5010860
5010862
5010864
5010866
455
4579 - 4608
Ɣ Bridge Reamer
Ɣ Taper shank, RIght-hand spiral flute
Ɣ Alésoirs de chaudronnerie queue cône morse
Ɣ Escariador de mango cónico
4579
Ŷ
Ɣ
d1
Ø
Inch
dsmall
Ø
Inch
dlarge
Ø
Inch
l2
l1
MTS Inch Inch
#
Flutes
EDP #
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1/4
9/32
11/32
3/8
25/64
7/16
1/2
9/16
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
2
2
2
2
3
3
3
3
4
4
4
4
4
4
4
4
5011055
5011056
5011057
5011058
5011059
5011060
5011061
5011062
4.3/8
5.1/8
5.1/8
6.1/8
7.1/8
7.3/8
7.3/8
7.3/8
8.1/4
9
9
10
11.3/4
12
12
12
d1
Ø
Inch
dsmall
Ø
Inch
dlarge
Ø
Inch
l2
l1
MTS Inch Inch
#
Flutes
EDP #
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
3
3
3
3
3
4
4
4
4
4
4
4
4
4
5011063
5011064
5011065
5011066
5011067
5011068
5011069
r
angle
82
82
82
82
82
90
90
90
90
90
d2
Ø
Inch
3/16
1/4
3/8
3/8
1/2
3/16
1/4
1/2
3/8
3/8
7.3/8
7.3/8
7.3/8
7.3/8
7.3/8
7.3/8
7.3/8
12
12
12
12
12
13
13
4608
Ɣ Center reamer
Ɣ 3-flute countersink
Ɣ 60°, 82° and 100° included angles
Ŷ
Ɣ
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
1/4
3/8
1/2
5/8
3/4
456
r
angle
100
100
100
100
100
60
60
60
60
60
d2
Ø
Inch
3/16
1/4
3/8
3/8
1/2
3/16
1/4
3/8
3/8
1/2
l2
Inch
3/4
7/8
1“
1“
1.1/4
3/4
7/8
1“
1“
1.1/4
l1
Inch
1.1/2
1.3/4
2“
2.1/4
2.5/8
1.1/2
1.3/4
2“
2.1/4
2.5/8
#
Flutes
3
3
3
3
3
3
3
3
3
3
EDP #
5011108
5011109
5011110
5011111
5011112
5011093
5011094
5011095
5011096
5011097
d1
Ø
Inch
1/4
3/8
1/2
5/8
3/4
1/4
3/8
3/4
1/2
5/8
l2
Inch
3/4
7/8
1“
1“
1.1/4
3/4
7/8
1.1/4
1“
1“
l1
Inch
1.1/2
1.3/4
2“
2.1/4
2.5/8
1.1/2
1.3/4
2.5/8
2“
2.1/4
#
Flutes
3
3
3
3
3
3
3
3
3
3
EDP #
5011098
5011099
5011100
5011101
5011102
5011103
5011104
5011107
5011105
5011106
SS300 - SS400
Ɣ Core Drill
Ɣ Taper length, 3-flute
Ɣ Forets aléseurs 3 lèvres Queue cylindrique
Ɣ Brocas escariadoras
SS300
Ŷ
d1
Ø
Inch
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
Ɣ
d1
decimal
Inch
0.2500
0.2812
0.3125
0.3438
0.3750
0.4062
0.4375
0.4688
0.5000
0.5625
0.6250
Ɣ Core Drill
Ɣ Taper length, 4-flute
l2
Inch
l1
Inch
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.5/8
4.3/4
4.3/4
4.7/8
4.7/8
6.1/8
6.1/4
6.3/8
6.1/2
6.3/4
7“
7.1/4
7.1/2
7.3/4
8.1/4
8.3/4
EDP #
or
e-Code
053016
053018
053020
053022
053024
053026
053028
053030
053032
053036
053040
Ɣ Forets aléseurs 4 lèvres Queue cylindrique
SS400
Ɣ
Ŷ
d1
Ø
Inch
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1“
d1
decimal
Inch
0.2500
0.2812
0.3125
0.3438
0.3750
0.4062
0.4375
0.4688
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
0.7812
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
l2
Inch
3.3/4
3.7/8
4“
4.1/8
4.1/4
4.3/8
4.5/8
4.3/4
4.3/4
4.3/4
4.7/8
4.7/8
4.7/8
5.1/8
5.3/8
5.5/8
5.7/8
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.3/8
6.3/8
l1
Inch
6.1/8
6.1/4
6.3/8
6.1/2
6.3/4
7“
7.1/4
7.1/2
7.3/4
8“
8.1/4
8.3/4
8.3/4
9“
9.1/4
9.1/2
9.3/4
9.7/8
10“
10“
10“
10“
10.3/4
11“
11“
EDP #
054016
054018
054020
054022
054024
054026
054028
054030
054032
054034
054036
054038
054040
054042
054044
054046
054048
054050
054052
054054
054056
054058
054060
054062
054100
457
T400
Ɣ Core drill
Ɣ Taper shank, 4-flute
Ɣ Forets aléseurs 4 lèvres Queue cylindrique DIN1809
Ŷ
Ɣ
d1 Ø
Inch
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1“
1.1/32
1.1/16
1.3/32
1.1/8
1.5/32
1.3/16
1.7/32
1.1/4
1.9/32
1.5/16
1.11/32
1.3/8
1.13/32
1.7/16
1.15/32
1.1/2
1.17/32
1.9/16
1.19/32
1.5/8
1.21/32
1.11/16
1.23/32
1.3/4
1.25/32
1.13/16
1.27/32
458
d1 decimal
Inch
0.5000
0.5312
0.5625
0.5938
0.6250
0.6562
0.6875
0.7188
0.7500
0.7812
0.8125
0.8438
0.8750
0.9062
0.9375
0.9688
1.0000
1.0312
1.0625
1.0938
1.1250
1.1562
1.1875
1.2188
1.2500
1.2812
1.3125
1.3438
1.3750
1.4062
1.4375
1.4688
1.5000
1.5312
1.5625
1.5938
1.6250
1.6562
1.6875
1.7188
1.7500
1.7812
1.8125
1.8438
l2
Inch
4.3/8
4.5/8
4.7/8
4.7/8
4.7/8
5.1/8
5.3/8
5.5/8
5.7/8
6“
6.1/8
6.1/8
6.1/8
6.1/8
6.1/8
6.3/8
6.3/8
6.1/2
6.5/8
6.7/8
7.1/8
7.1/4
7.3/8
7.1/2
7.7/8
8.1/2
8.5/8
8.3/4
8.7/8
9“
9.1/8
9.1/4
9.3/8
9.3/8
9.5/8
9.7/8
10“
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
10.1/8
l1
Inch
8.1/4
8.1/2
8.3/4
8.3/4
8.3/4
9“
9.1/4
9.1/2
9.3/4
9.7/8
10.3/4
10.3/4
10.3/4
10.3/4
10.3/4
11“
11“
11.1/8
11.1/4
12.1/2
12.3/4
12.7/8
13“
13.1/8
13.1/2
14.1/8
14.1/4
14.3/8
14.1/2
14.5/8
14.3/4
14.7/8
15“
16.3/8
16.5/8
16.7/8
17“
17.1/8
17.1/8
17.1/8
17.1/8
17.1/8
17.1/8
17.1/8
MTS
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
024644
024646
024648
024650
024652
024654
EDP #
024532
024534
024536
024538
024540
024542
024544
024546
024548
024550
024552
024554
024556
024558
024560
024562
024600
024602
024604
024606
024608
024610
024612
024614
024616
024618
024620
024622
024624
024626
024628
024630
024632
024634
024636
024638
024640
024642
024644
024646
024648
024650
024652
024654
T400 - 4702
d1Ø
Inch
1.7/8
1.29/32
1.15/16
1.31/32
2“
2.1/8
2.1/4
2.3/8
2.1/2
d1decimal
Inch
1.8750
1.9062
1.9375
1.9688
2.0000
2.1250
2.2500
2.3750
2.5000
l1
Inch
17.3/8
17.3/8
17.3/8
17.3/8
17.3/8
17.3/8
17.3/8
17.3/8
18.3/4
l2
Inch
10.3/8
10.3/8
10.3/8
10.3/8
10.3/8
10.1/4
10.1/8
10.1/8
11.1/4
MTS
5
5
5
5
5
5
5
5
5
EDP # or
e-Code
024656
024658
024660
024662
024700
024708
024716
024724
024732
4702
Ɣ Counterbore
Ɣ Short series, interchangeable pilot type
Ɣ Refrentadores
Ɣ Fraises pour logement de tête de vis
d2
pØ
Ŷ
Ɣ
d1
Ø
Inch
l2
Inch
l1
Inch
d2
Ø
Inch
#
Flutes
pilot
Ø
Inch
pilot
Ø
low
pilot
Ø
high
EDP #
1/4
9/32
5/16
11/32
3/4
3/4
3/4
3/4
3.13/16
3.13/16
3.13/16
3.13/16
15/64
17/64
19/64
5/16
3
3
3
3
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
3/16
7/32
1/4
9/32
6210031
6210032
6210033
6210034
3/8
13/32
1.000
1.000
4.1/16
4.1/16
5/16
3/8
3
3
5/32
5/32
3/16
3/16
5/16
11/32
6210035
6210036
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1
1.1/16
1.1/8
1.3/16
1.000
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
1.3/4
4.1/16
4.5/16
4.5/16
4.5/16
4.5/16
5.1/8
5.1/8
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
6.1/8
6.1/8
6.3/8
6.3/8
6.3/8
6.3/8
6.3/8
3/8
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1“
1“
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
1
1.1/16
1.1/8
6210037
6210038
6210039
6210040
6210041
6210042
6210043
6210044
6210045
6210046
6210047
6210048
6210049
6210050
6210051
6210052
6210053
6210054
6210055
6210056
6210057
6210058
459
4702 - 4703
d1
Ø
Inch
1.1/4
1.3/8
1.1/2
l2
Inch
2
2
2
l1
Inch
6.5/8
6.5/8
7.7/8
d2
Ø
Inch
1“
1“
1.1/4
#
Flutes
5
5
5
pilot
Ø
Inch
3/8
3/8
3/8
pilot
Ø
low
7/16
7/16
7/16
pilot
Ø
high
1.3/16
1.5/16
1.7/16
EDP #
or
e-Code
6210059
6210060
6210061
1.5/8
1.3/4
1.7/8
2
2.1/4
2.1/4
2.1/4
2.1/2
8.1/8
8.1/8
8.1/8
8.3/8
1.1/4
1.1/4
1.1/2
1.1/2
5
5
5
5
7/16
7/16
7/16
1/2
1/2
1/2
1/2
9/16
1.9/16
1.11/16
1.13/16
1.15/16
6210062
6210063
6210064
6210065
4703
Ɣ Counterbore
Ɣ Short series, interchangeable pilot type
Ɣ Refrentadores
pØ
Ŷ
Ɣ
d1
Ø
Inch
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1”
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.1/2
1.5/8
l2
Inch
3/4
3/4
1.000
1.000
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
2
2
2
2
2.1/4
l1
Inch
3.13/16
3.13/16
4.1/16
4.1/16
4.5/16
4.5/16
5.1/8
5.1/8
5.3/8
5.3/8
5.3/8
6.1/8
6.3/8
6.3/8
6.3/8
6.3/8
6.5/8
6.5/8
6.5/8
7.7/8
8.1/8
1.3/4
1.7/8
2”
2.1/8
2.1/4
2.3/8
2.1/2
2.1/4
2.1/4
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
8.1/8
8.1/8
8.3/8
9.7/8
9.7/8
9.7/8
9.7/8
460
neck
Ø
Inch
15/64
19/64
11/32
13/32
29/64
29/64
9/16
5/8
21/32
21/32
21/32
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1.3/16
1.3/8
d3
Ø
Inch
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
2.9/16
3.1/8
3.1/8
3.1/8
3.1/8
3.1/8
3.7/8
3.7/8
3.7/8
3.7/8
3.7/8
3.7/8
3.7/8
3.7/8
4.7/8
4.7/8
#
Flutes
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
pilot
Ø
Inch
3/32
3/32
5/32
5/32
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
1.3/8
1.1/2
1.1/2
1.3/4
1.3/4
1.3/4
1.3/4
4.7/8
4.7/8
4.7/8
6.1/8
6.1/8
6.1/8
6.1/8
5
5
5
5
5
5
5
7/16
7/16
1/2
1/2
1/2
1/2
1/2
pilot
Ø
low
1/8
1/8
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
1/2
1/2
1/2
9/16
9/16
9/16
9/16
9/16
MTS
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
3
4
4
pilot
Ø
high
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.7/16
1.9/16
EDP #
6210066
6210068
6210070
6210072
6210074
6210076
6210078
6210080
6210082
6210084
6210085
6210086
6210087
6210088
6210089
6210090
6210091
6210092
6210093
6210094
6210095
4
4
4
5
5
5
5
1.11/16
1.13/16
1.5/16
2.1/16
2.3/16
2.5/16
2.7/16
6210096
6210097
6210098
6210099
6210100
6210101
6210102
4706 - 4700
Ɣ Counterbore
Ɣ Aircraft short series
Ɣ Designed for pneumatic or
electric drills
Ɣ Interchangeable pilot type
Ɣ Refrentadores
d2
pØ
l3
Ŷ
Ɣ
d1
Ø
Inch
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
17/32
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
l2
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
l1
Inch
2.3/8
2.3/8
2.3/8
2.3/8
2.3/8
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
2.13/16
d2
Ø
Inch
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
l3
Inch
1.1/8
1.1/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
neck
Ø
Inch
15/64
0.2560
17/64
19/64
5/16
5/16
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
#
Flutes
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
pilot
Ø
Inch
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
pilot
Ø
low
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
pilot
Ø
high
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
EDP #
6210137
6210138
6210139
6210140
6210141
6210142
6210143
6210144
6210145
6210146
6210147
6210149
6210151
6210153
6210155
6210157
6210159
6210161
4700
Ɣ Counterbore
Ɣ Long series
Ɣ Refrentadores
d2
pØ
l3
4700
Ŷ
Ɣ
d1
Ø
Inch
1/4
l2
Inch
3/4
l1
Inch
5.3/4
d2
Ø
Inch
15/64
l3
Inch
2.1/4
neck
Ø
Inch
15/64
#
Flutes
3
pilot
Ø
Inch
3/32
pilot
Ø
low
1/8
pilot
Ø
high
3/16
EDP #
6210001
5/16
3/8
7/16
1/2
9/16
3/4
1.000
1.000
1.1/4
1.1/4
5.3/4
5.3/4
6.1/8
6.3/8
6.1/2
3/8
3/8
7/16
1/2
1/2
2.1/4
2.1/4
2.1/4
2.1/2
2.1/2
19/64
11/32
13/32
15/32
15/32
3
3
3
3
3
3/32
5/32
5/32
3/16
3/16
1/8
3/16
3/16
1/4
1/4
1/4
5/16
3/8
7/16
1/2
6210003
6210005
6210007
6210009
6210010
5/8
3/4
7/8
1“
1.1/4
1.1/2
1.1/2
1.3/4
7“
7.1/4
7.3/4
9“
5/8
3/4
7/8
1“
1.5/8
2.3/4
3“
3“
9/16
11/16
3/4
7/8
3
3
3
3
3/16
1/4
1/4
5/16
1/4
5/16
5/16
3/8
9/16
11/16
13/16
15/16
6210011
6210013
6210015
6210017
461
4705
Ɣ Counterbore
Ɣ Aircraft long series
Ɣ Interchangeable pilot type
Ɣ Refrentadores
d2
pØ
l3
Ŷ
Ɣ
d1
Ø
Inch
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
l2
Inch
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
l1
Inch
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
3.13/16
d2
Ø
Inch
15/64
17/64
19/64
5/16
5/16
3/8
3/8
7/16
l3
Inch
3.1/16
3.1/16
3.1/16
3.1/16
3.1/16
3.1/16
3.1/16
3.1/16
neck
Ø
Inch
15/64
17/64
19/64
5/16
5/16
3/8
3/8
7/16
#
Flutes
3
3
3
3
3
3
3
3
pilot
Ø
Inch
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
pilot
Ø
low
1/8
1/8
1/8
1/8
3/16
3/16
3/16
1/4
pilot
Ø
high
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
EDP #
6210107
6210108
6210109
6210110
6210111
6210112
6210113
6210114
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
7/8
15/16
1
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
3/4
3/4
3/4
3/4
3/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
3.13/16
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
5.3/8
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3.1/16
4.5/8
4.5/8
4.3/16
4.3/16
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
3.5/8
7/16
1/2
1/2
9/16
9/16
9/16
5/8
5/8
11/16
11/16
3/4
3/4
3/4
3/4
15/16
15/16
15/16
1“
1“
1“
1.1/8
1.1/8
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
7/16
9/32
9/32
9/32
9/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
13/16
7/8
15/16
1
1.1/16
1.1/8
1.3/16
1“
1“
1
1
6210115
6210116
6210117
6210118
6210119
6210120
6210121
6210122
6210123
6210124
6210125
6210126
6210127
6210128
6210129
6210130
6210131
6210132
6210133
6210134
6210135
6210136
462
4704
Ɣ Detachable Pilot
Pilot
Ø
Inch /
3/32
40
1/8
30
5/32
21
20
19
3/16
11
10
7/32
1/4
F
1/8
30
5/32
21
20
19
3/16
11
10
7/32
1/4
F
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/16
7/32
1/4
9/32
5/16
3/8
3/16
11
10
7/32
1/4
F
9/32
5/16
11/32
Ɣ Pilote
d1
Ø
Inch
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
EDP #
3210235
3210236
3210114
3210238
3210115
3210240
3210241
3210242
3210116
3210244
3210245
3210117
3210118
3210248
3210249
3210250
3210251
3210252
3210253
3210254
3210255
3210256
3210257
3210258
3210259
3210260
3210261
3210262
3210263
3210264
3210265
3210266
3210267
3210119
3210120
3210121
3210122
3210123
3210124
3210281
3210282
3210283
3210284
3210125
3210286
3210287
3210126
3210444
Pilot
Ø
Inch /
3/8
13/32
7/16
15/32
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
1/4
F
9/32
5/16
3/8
7/16
1/2
17/32
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
7/16
1/2
9/16
5/8
11/16
3/4
Ɣ Guía desmontable para Refrentador
d1
Ø
Inch
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
EDP #
3210127
3210445
3210128
3210446
3210129
3210130
3210131
3210294
3210295
3210296
3210297
3210298
3210299
3210300
3210301
3210302
3210132
3210133
3210134
3210135
3210447
3210136
3210137
3210138
3210139
3210140
3210141
3210313
3210314
3210142
3210143
3210144
3210145
3210146
3210147
3210148
3210149
3210150
3210151
3210152
3210153
3210154
3210155
3210156
3210157
3210158
3210159
3210160
463
4704 - 4602
Pilot
Ø
Inch /
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
d1
Ø
Inch
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
EDP #
3210161
3210162
3210163
3210164
3210165
3210166
3210167
3210168
3210169
3210170
3210171
3210172
3210173
3210174
3210175
3210176
3210177
3210178
3210179
3210180
3210181
3210182
3210183
3210184
3210185
3210186
Pilot
Ø
Inch /
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1“
1.1/16
1.1/8
1.3/16
1.1/4
1.5/16
1.3/8
1.7/16
1.1/2
1.9/16
1.5/8
1.11/16
1.3/4
1.13/16
1.15/16
1.7/8
2“
d1
Ø
Inch
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
EDP #
3210195
3210196
3210197
3210198
3210199
3210200
3210201
3210202
3210203
3210204
3210205
3210206
3210207
3210208
3210209
3210210
3210211
3210212
3210213
3210214
3210215
3210217
3210216
3210218
4602
Ɣ 4-flute Countersink
Ɣ 60° and 82° included angles
Ɣ Fraise à ébavurer et à chanfreiner
Ɣ Avellanadores
Ŷ
Ɣ
d1
Ø
Inch
1/2
5/8
3/4
7/8
r
angle
60
60
60
60
d2
Ø
Inch
1/2
1/2
1/2
1/2
l2
Inch
1.5/8
1.3/4
1.7/8
2“
l1
Inch
3.7/8
4“
4.1/8
4.1/4
1“
60
1/2
2.1/8
4.3/8
464
#
Flutes
4
4
4
4
4
EDP #
4710588
4710589
4710590
4710591
4710592
d1
Ø
Inch
1/2
5/8
3/4
7/8
1“
r
angle
82
82
82
82
82
d2
Ø
Inch
1/2
1/2
1/2
1/2
1/2
l2
Inch
1.5/8
1.3/4
1.7/8
2“
2.1/8
l1
Inch
3.7/8
4“
4.1/8
4.1/4
4.3/8
#
Flutes
4
4
4
4
4
EDP #
4710593
4710594
4710595
4710596
4710597
4603 - G135
Ɣ Single flute Countersink
Ɣ 60°, 82° and 90° included angles
Ɣ Avellanadores
r
d2
4603
Ŷ
Ɣ
d1 Ø
Inch
3/8
1/2
3/4
1“
1.1/4
1.1/2
1/4
3/8
1/2
5/8
3/4
1“
r
angle
60
60
60
60
60
60
82
82
82
82
82
82
d2Ø
mm
1/4
1/4
3/8
1/2
1/2
1/2
3/16
1/4
1/4
3/8
3/8
1/2
l1
Inch
1.21/32
1.27/32
2.13/32
2.13/16
3.1/2
3.7/8
1.7/16
1.21/32
1.27/32
2.3/32
2.13/32
2.13/16
d1 Ø
Inch
1.1/4
1.1/2
1/4
3/8
1/2
5/8
3/4
1“
1.1/4
1.1/2
EDP #
4710790
4710791
4710793
4710794
4710795
4710796
4710797
4710798
4710799
4710800
4710801
4710802
r
angle
82
82
90
90
90
90
90
90
90
90
d2Ø
mm
1/2
1/2
3/16
1/4
1/4
3/8
3/8
1/2
1/2
1/2
l1
Inch
3.1/2
3.7/8
1.7/16
1.21/32
1.27/32
2.3/32
2.13/32
2.13/16
3.1/2
3.7/8
EDP #
4710803
4710804
4710805
4710806
4710807
4710808
4710809
4710810
4710811
4710812
G135
Ɣ 3-Flute Countersink
Ɣ Avellanadores
Ŷ
Ɣ
max
d
mm
6.3
8.0
10.0
12.5
min
d
1.6
2.0
2.5
3.2
l1
mm
45
50
50
56
d2
Ø
mm
5
6
6
8
#
Flutes
3
3
3
3
Stock #
0108482
0108499
0144817
0108444
EDP #
or
e-Code
G1356.3
G1358.0
G13510.0
G13512.5
max
d
mm
16.0
20.0
25.0
min
d
4.0
5.0
6.3
l1
mm
63
67
71
d2
Ø
mm
10
10
10
#
Flutes
3
3
3
Stock #
0108451
0108468
0108475
EDP #
or
e-Code
G13516.0
G13520.0
G13525.0
465
G136 - G137
Ɣ Avellanadores
G136
Ŷ
Ɣ
max
d
mm
4.3
5.0
5.3
5.8
6.0
6.3
7.0
7.3
8.0
8.3
9.4
10.0
10.4
11.5
min
d
1.3
1.5
1.5
1.5
1.5
1.5
1.8
1.8
2.0
2.0
2.2
2.5
2.5
2.8
l1
mm
40
40
40
45
45
45
50
50
50
50
50
50
50
56
d2
Ø
mm
4
4
4
5
5
5
6
6
6
6
6
6
6
8
#
Flutes
3
3
3
3
3
3
3
3
3
3
3
3
3
3
EDP #
or
e-Code
G1364.3
G1365.0
G1365.3
G1365.8
G1366.0
G1366.3
G1367.0
G1367.3
G1368.0
G1368.3
G1369.4
G13610.0
G13610.4
G13611.5
Stock #
0108659
0108666
0108673
0108680
0108697
0108703
0108710
0108727
0108734
0108741
0108758
0108505
0108512
0108529
max
d
mm
12.4
13.4
15.0
16.5
19.0
20.5
23.0
25.0
26.0
28.0
30.0
31.0
min
d
2.8
2.9
3.2
3.2
3.5
3.5
3.8
3.8
3.8
4.0
4.2
4.2
l1
mm
56
56
60
60
63
63
67
67
67
71
71
71
d2
Ø
mm
8
8
10
10
10
10
10
10
10
12
12
12
#
Flutes
3
3
3
3
3
3
3
3
3
3
3
Stock #
0108536
0108543
0108550
0108567
0108574
0108581
0108598
0108604
0108611
0108628
0108635
0108642
EDP #
or
e-Code
G13612.4
G13613.4
G13615.0
G13616.5
G13619.0
G13620.5
G13623.0
G13625.0
G13626.0
G13628.0
G13630.0
G13631.0
G137
Ɣ Avellanadores
Ŷ
Ɣ
max
d
mm
16.0
20.0
25.0
31.5
466
min
d
4.0
5.0
6.3
10.0
l1
mm
90
106
112
118
MK
(MTS)
1
2
2
2
#
Flutes
3
3
3
3
Stock #
0108765
0108772
0108789
0108796
EDP #
or
e-Code
G13716.0
G13720.0
G13725.0
G13731.5
max
d
mm
40.0
50.0
63.0
80.0
min
d
12.5
16.0
20.0
25.0
l1
mm
150
160
190
200
MK
(MTS)
3
3
4
4
#
Flutes
3
3
3
3
Stock #
0108802
0108819
0108826
0108833
EDP #
or
e-Code
G13740.0
G13750.0
G13763.0
G13780.0
G138 - G154
Ɣ Avellanadores
G138
Ŷ
Ɣ
max
d mm
min
d
l1
mm
MK
#
(MTS) Flutes
Stock #
EDP # or
e-Code
max
d mm
min
d
l1
mm
MK
#
(MTS) Flutes
Stock #
EDP # or
e-Code
15.0
16.5
19.0
20.5
23.0
25.0
26.0
28.0
3.2
3.2
3.5
3.5
3.8
3.8
3.8
4.0
85
85
100
100
106
106
106
112
1
1
2
2
2
2
2
2
0108840
0108857
0108864
0108871
0108888
0108895
0108901
0108918
G13815.0
G13816.5
G13819.0
G13820.5
G13823.0
G13825.0
G13826.0
G13828.0
30.0
31.0
34.0
37.0
40.0
50.0
63.0
80.0
4.2
4.2
4.5
4.8
10.0
14.0
16.0
22.0
112
112
118
118
140
150
180
190
2
2
2
2
3
3
4
4
0108925
0108932
0108949
0108956
0108963
0108970
0108987
0108994
G13830.0
G13831.0
G13834.0
G13837.0
G13840.0
G13850.0
G13863.0
G13880.0
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
G154
Ɣ Avellanadores
Ŷ
Ɣ
max
d mm
6.3
8.3
10.4
12.4
min
d
1.5
2.0
2.5
2.8
l1
mm
45
50
50
56
d2Ø
mm
5
6
6
8
#
Flutes
3
3
3
3
Stock #
0149348
0149355
0149362
0149379
EDP # or
e-Code
G1546.3
G1548.3
G15410.4
G15412.4
max
d mm
16.5
20.5
25.0
min
d
3.2
3.5
3.8
l1
mm
60
63
67
d2Ø
mm
10
10
10
#
Flutes
3
3
3
Stock #
0149386
0149393
0149409
EDP # or
e-Code
G15416.5
G15420.5
G15425.0
467
Miscellaneous
Screw Extractor
1800
Ɣ Extracteur De Vis
Ɣ Extractor Del Tornillo
Nr.
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
d1
Ø Inch
0.054
0.086
1/8
11/64
1/4
3/8
31/64
47/64
31/32
1.7/32
1.15/32
1.27/32
d2
Ø Inch
5/32
3/16
1/4
5/16
7/16
5/8
3/4
1“
1.1/4
1.17/32
1.27/32
2.9/32
l1
Inch
2“
2.3/8
2.3/4
3“
3.3/8
3.3/4
4.1/8
4.3/8
4.5/8
5“
5.5/8
6.1/4
EDP#
3210001
3210002
3210003
3210004
3210005
3210006
3210007
3210008
3210009
3210010
3210011
3210012
1815 (Sets)
For Removing Screw
Size
3/32 to 5/32
5/32 to 7/32
7/32 to 9/32
9/32 to 3/8
3/8 to 5/8, 1/8, 1/4 pipe
5/8 to 7/8, 3/8 pipe
7/8 to 1.1/8, 1/2 pipe
1.1/8 to 1.3/8, 3/4 pipe
1.3/8 and up, 1“ pipe
2.1/8 to 2.1/2
2.1/2 to 3“
3“ to 3.1/2“
Style
1800
# in
Set Description
5
Range: #1 - #5
1816 (Sets)
Style
1800
# in
Set
6
Drift Keys
Drill Sleeves
430
411
Description
Range: #1 - #6
EDP#
3210014
Ɣ Cône de réduction
Ɣ Conos Morse endurecidos y cementados
Ɣ Hardened and ground
Ɣ Extracteur d’outils
Ɣ Expulsores de Brocas
Taper
Shank
1
2
3
4
5
EDP#
3210013
K=
Nr.
2
3
4
3
4
4
EDP#
3210338
3210339
3210340
3210341
3210342
K1 =
Nr.
1
1
1
2
2
3
l1
Inch
3-1/2
3-15/16
4-13/16
4-3/8
4-13/16
5-5/16
EDP #
3210046
3210047
3210048
3210050
3210051
3210053
K=
Nr.
5
5
6
K1 =
Nr.
3
4
5
l1
Inch
6-1/16
6-1/2
8-1/2
EDP #
3210054
3210055
3210057
K=Ext. K1=Int.
K=Ext.(externe) K1=Int. (Interne)
K=Ext. K1=Int.
Cutting Oil
Tool Bit Blanks
1900
707
757
Ɣ Huile de coupe
Ɣ Aceite de Corte
(HSS) 727 (Cobalt)
(Cobalt Vanadium T-15)
Ɣ Barreaux rectifiés
Ɣ Cuchillas
Size
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1“
468
OAL
2.1/2
2.1/2
2.1/2
3“
3.1/2
4“
4.1/2
5“
7“
707
EDP#
6310293
6310294
6310295
6310296
6310297
6310298
6310299
6310300
6310302
727
EDP#
6310317
6310318
6310319
6310320
6310321
6310322
6310323
6310324
6310326
757
EDP#
6310305
6310306
6310307
6310308
6310309
6310310
6310311
6310312
6310314
Nr.
4 oz
16 oz
1 gal
5 gal
5 gal
55 gal
1 lb
20 oz
1 gal
16 oz
Style
1900
1900
1900
1900
1900
1900
1900
1900
1900
1900
Qty.
24
12
6
1
1
1
24
12
6
12
Description
Drilling & Tapping Fluid, Squirt Bottle
Drilling & Tapping Fluid, Squirt Bottle
Drilling & Tapping Fluid, Bottle
Drilling & Tapping Fluid, Dispenser
Drilling & Tapping Fluid, Pail
Drilling & Tapping Fluid, Drum
Wax Stick
Aerosal Can - Foam
Light Tapping Fluid, Bottle
Light Tapping Fluid, Squirt Bottle
EDP#
1910501
1910502
1910503
1910506
1910504
1910505
1950501
1910509
1930503
1930502
Notes
469
Notes
470
Product Warranty
Precision Dormer, LLC (“The Company”).
The Company warrants to original equipment manufacturers, distributors and industrial and commercial users of its products that each new
product manufactured by The Company shall be free from material defects and workmanship for one year after delivery by The Company. The
Company’s exclusive obligation under this warranty is limited to furnishing a replacement for, or at its option, repairing or issuing credit for, any
product which is, within one year from the date of delivery by The Company, returned freight prepaid to the plant designated by a representative
of The Company and which upon inspection is determined by The Company to be materially defective in material or workmanship.
Complete information as to operating conditions, machine setup and application of cutting fluid should accompany any product returned
for inspection. All defective products returned to The Company under this warranty shall be The Company’s property. The provisions of this
warranty shall not apply to any product of The Company which has been subjected to misuse, improper operating conditions, machine setup,
application of cutting fluid, or which has been repaired or altered without authorization from The Company. THIS WARRANTY IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EXCEPT AS EXPRESSELY SET FORTH HEREIN, THE COMPANY MAKES
NO WARRANTY, EXPRESS OR IMPLIED, AS TO ANY MATTER WHATSOEVER INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The Company’s sole liability on any claim of any kind, whether in contract, tort, or otherwise, for any loss or damage arising out of, connected
with, or resulting from the manufacture, sale, delivery or use of the products sold hereunder shall in no case exceed the amount actually paid to
The Company for the applicable products. IN NO EVENT SHALL THE COMPANY BE LIABLE TO ANY ENTITY OR PERSON FOR ANY
SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED, ON ANY THEORY OF LIABILITY, AND
WHETHER OR NOT THE COMPANY HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES.
The Company neither assumes nor authorizes any other person or firm to assume for it any other obligation or liability in connection with
its products. The purchaser acknowledges that there are no warranties implied by custom or usage in the trades of the purchaser or The
Company, and that it is customary in the trades of purchaser and The Company that there are to be no warranties, and that any prior dealing
between the purchaser and The Company or its authorized distributor does not imply any warranty from The Company. The limitations set forth
in this section shall apply notwithstanding any failure of essential purpose of any limited remedy.
471
USA
301 Industrial Avenue, Crystal Lake, IL 60012
Tel: (800) 877 3745,
Fax: 815 459 2804
Canada
2550 Meadowvale Blvd. Unit 3, Mississauga, ON L5N 8C2
Tel: (888) 336 7637, En Français: (888) 368 8457
Fax: (905) 542 7000
M-F 7a.m.-5p.m. CST
M-F 8a.m.-5p.m. EST
The Right Tool
Product Offering
Our products are developed in close cooperation
with customers, based on leading-edge expertise
in process technology. Our manufacturing facilities
hold Global Certifications to ensure quality
products from Precision Dormer:
Quality ISO 9001
Environment ISO14001
Health and Safety OHSAS18001
MSDS located on our web site
Technical and Sales Support
Our North American sales force works closely
with you to get you the right tool for your
application at the lowest machining costs.
For technical support,
email us at [email protected] or call us
at 800-877-3745.
Tool Search
Our tool selector and other web based
applications allow both end users and distributors
easy and quick access to find the best product
- for your specific tooling application.
New Products
A steady stream of new product launches will be
introduced including a new tool selector so you
can easily find the right tool at the right time to
help reduce your machining costs.
The Right Time
On-Time Deliveries
Our centrally located Distribution Center in
Hebron, Kentucky ships out orders to SAME DAY
if placed by 4:00 pm CST.
Strong Distribution Channel
Our products are sold through an exclusive
network of regional and local cutting tool
distributors throughout North America. To find a
local distributor, visit www.precisiondormer.com
or call 800-877-3745
Customized Training
We offer you on-site product training to fit the
needs of you or your customers, from new
products and services to basic tool applications.
Workshops will be customized for all levels of
knowledge.
Contact us at [email protected]
Your local Precision Dormer distributor:
Issue: 01/2010
EDP# LIT7084

Precision Twist Drill Catalog

Transcription

Similar documents