917 NEW - Borden Lighting

917 NEW
OFF-THE-GRID BOLLARD
WET LOCATION
print this page
email this page to a colleague
installation instructions
interactive submittal drawing
DESIGN: RANDY BORDEN
COMPANIONS
718
OPERATION
FEATURES
This OTG (off-the-grid) bollard gets its power
from the sun. The photovoltaic panel collects
energy which is stored by integral lithium-iron
batteries. It is programmed for the light to come
on automatically at dusk and to turn off at
daybreak. The fixture delivers full brightness for
approximately five hours and then it goes to half
power until daybreak. Under most conditions it
should power continuously until daybreak, but
weather and location will affect that.
• This off-the-grid bollard is powered by the sun.
• Direct burial post for gravel or concrete pier.
• TrexTMpost is available in 3 colors.
MATERIALS
•
•
•
Solid bronze or stainless steel hood. Aluminum is
used for painted finishes. Cast aluminum backplate
is painted to match hood finish.
High transmission clear refractive acrylic lens.
TrexTM post is made of 95% recycle plastic and wood.
FINISHES
ORIENTATION
The location of the PV panel will depend on
the fixture orientation. The location must be
specified—see page 2 for how to spec the
location. Ideally the PV panel wants to be on the
face of the bollard facing south, but some east
or west deviation can be accommodated. Some
applications may require multiple PV orientations.
Full sun locations are recommended.
NBZ
SSS
SGB
SGW
Natural Bronze
Satin Stainless Steel
Semi-Gloss Black
Semi-Gloss White
SGBZ Semi-Gloss Bronze
SGS
Semi-Gloss Silver
CCP
Custom Color Painted Finish
Trex Post Colors
TXB Woodland Brown
TXG Winchester Grey
TXT Saddle Tan
LAMPING
LED: 1W LED, 100 lumens, 3000K.
POWER: Photovoltaic panel charges integral lithium-iron
batteries.
999 Montague St • San Leandro, CA 94577 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com
917
OFF-THE-GRID BOLLARD
pendants
8 1/8"
4 7/8"
8 1/8"
VERIFY
4 7/8"
VERIFY
ceiling
4 1/2" SQ
TREX POST
int wall
4 1/2" SQ
TREX POST
ext wall
PHOTOMETRICS
See LSI Report No. 27,864
for model 718-LED.
Note: Test was done with an array
rated for 420 lm. Adjust lumens
down to 100 rated lumens.
917
PHOTOVOLTAIC ORIENTATION
The PV panel should be oriented as close as possible
to due south. The position of the PV panel can be
specified as shown below:
LEFTSIDE
P2
FRONT
P1
BACK
P3
RIGHT SIDE
P4
CATALOG DRAWING
TYPE
PROJECT
SCALE
SPECIFIER
DATE
PROJECT SPEC
DWN
TREX COLOR
OPTIONS
999 Montague Street
San Leandro, CA 94577
510-357-0171 Fax 510-357-3832
www.bordenlighting.com
M
SPEC NO
NOTE:
UL & IBEW LABELED
DRY
DAMP
WET
Information appearing hereon is proprietary and confidential and may not be used without the permission of Borden
LEFTSIDE
P2
FRONT
P1
SPEC GUIDE
CAT#
-
BACK
P3
TXB Woodland
Brown
RIGHT SIDE
P4
CATALOG DRAWING
SAMPLE SPEC: 917-P2-LED-NBZ/TXB-36” OA
PROJECT
- LAMPING
ORIENSPECIFIER
-
FINISH
-
TREX
-
q P1
q P2
999 Montague Street
San Leandro, CA 94577 q P3
510-357-0171 Fax 510-357-3832
www.bordenlighting.comq P4
TXT Saddle Tan
TYPE
SCALE
OA
DATE
DWN
MY CKD
q NBZ
q TXB
q 36” STD
q SSS
q TXG
SPEC NO
q SGB
q TXT
NOTE:
PROJECT
q SGW
SPECIFIER
UL & IBEW LABELED
DRY
DAMP
WET
q SGBZ
PROJECT SPEC
Information appearing hereon is proprietary and confidential and
may not be used without the permission of Borden Lighting.
q SGS
q 917
TXG Winchester
Grey
PROJECTqSPEC
LED
RB
SCALED REFERENCE
917
999 Montague Street
San Leandro, CA 94577
510-357-0171 Fax 510-357-3832
www.bordenlighting.com
UL & IBEW LABELED
TYPE
SCALE
IBEW Labelled
DATE
DWN
22 JAN 2015
MY CKD
SPEC NO
DRY
917
Our fixtures
DAMP
WET are handcrafted
here in the USA using the
Information appearing hereon is proprietary and confidential and may not be used
withoutquality
the permission
of Borden Lighting.
highest
materials.
999 Montague St • San Leandro, CA 94577 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com
RB