Photo Cube Assembly Instructions

Photo Cube Assembly Instructions:
Getting Started:
Assemble and construct your first new life born 0 year clear photo cube (provided),
bend and fold all corners with fingers to a fully constructed 3” x 3” clear square.
Have child stand
up straight, back
against the Life
Stand, feet
together. Attach
and slide clear
photo cube
down to top of
child’s head and
record height.
Use the template provided on the website or use Word to create a
form that has the Age, Height, Weight, or Shoe Size (or any other
information that you would like to add), then assemble 4 photos
unto one page by using the 3.5” x 5” 9 (4)size format selection on
printer format (print on 8.5x11 110lb paper for best results) and cut
out to the size of the cube panel, approximately 2-15/16” x
2-15/16”
Make sure to attach your
Life Stand to the Door
Open the transparent cover of clear photo cube and insert each
trimmed photo inside desired location (top, sides, and bottom)
Recorded information should be placed in the front and back
panel.
Have your photos that you
want to use, printed
Recommended: Use gift tissue paper (any color) crinkle into a
round ball figure and place inside photo cube, tissue paper will
expand and hold photos / measurements inserts in place inside
photo cube. Use this 0 yr. birth photo cube to measure child each
birthday year to demonstrate growth.
Refer to photo cube placement guide diagram and find current age position placement. Attach fully assembeled photo cube on height
measurement position recorded earlier.
Scissors
If you don’t have your child’s past growth height measurements (1) you can either request past measurements from your pediatrician or (2) take
your child’s most current birthdate measurement then use the height chart to find trend averages back to birth length based on your child’s
growth trend.