unic truck mounted crane

Transcription

UNIC TRUCK MOUNTED CRANE
presents
URW230
URW260
URW290
URW340
URW370
URW500
URW540
URU800
CONTENTS
1
UNIC is...
4
NEW Products
5
UNIC Truck Mounted Crane
7
UNIC Truck Crane Line Up
9
URW 230 Series
11
URW 260 Series
13
URW 290 Series
15
URW 340 Series
17
URW 370 Series
19
URW 500 Series
21
URW 540 Series
23
URU 800 Series
UNIC IS...
VERSATILE
Operational advantages…
Buildings, walls, whatever,
with UNIC wire-rope
cranes you get precise
high-lift placement and
safe, sure operation. Their
dependability is all in
their strength and design,
original UNIC features.
Higher performance, too,
at lower depths. UNIC
wire-rope cranes handle
heavy loads in deephole jobs with accuracy
and stability. A wide
range of models assures
versatile matching to job
requirements.
Tight places are the right places
for UNIC wire-rope cranes. In any
operating situation their strong steel
cables mean extra dependability
and safety. High, low or tight, UNIC
wire-rope cranes are always right.
STRONG
Heavy Lifts with a winch rope crane…
The working radius can
increase when the load is lifted
with a knuckle boom crane.
An 8TM UNIC easily
lifts a 3 tonne cable
drum. This is not
possible with even
a 9TM knuckle
boom crane.
The Lift Curve Graph of a
typical 9TM knuckle boom
crane shows it cannot lift a
3 tonne load onto the tray.
1
When a load is raised by a
winch rope crane, the working
radius does not increase.
SMART
Digital Load Meter...
The digital load meter provides clear critical load weight information to the
operator at all times.
SIMPLE
Control lever layout…
Synchronised control levers are laid out for operational ease. One hand can
boom telescope and simultaneously hook down or reverse. UNIC control levers
also have reflective direction symbols for safer operation in low light situations.
PROBLEM
SOLVING
Automatic Hook Stow System…
Hook storage on a knuckle boom crane fitted with a winch is always a problem.
Not with a UNIC.
Flick one switch - job done!
2
UNIC IS...
EFFICIENT
Automative Throttle Advance…
This is an inbuilt feature of UNIC cranes. Incorporated into the control levers, increase truck
engine revs proportionally with lever movement. This provides optimums in control of load
handling, speed of hook travel, fuel economy and noise control.
NB
Requires to interface with the chassis manufacturers
suitable “throttle pod” system.
SAFE
Anti-two block system…
UNIC’s anti two-block system means that there is no fear of the hook striking the boom tip.
The overwind alarm and auto stop is a standard in all UNIC truck cranes.
Without this feature the dangerous practice of overwinding can easily occur.
VISIBLE
Three Light Tower…
3
Optional on all new UNIC cranes. This safety feature is clear, bright and visible to
everyone on site.
NEW PRODUCTS
SUPER ML RADIO REMOTE
TRANSMITTER
AS YOU WORK
Read…
• Exactly what you can lift in kg
• Exactly what you are lifting in kg
• Critical information such as boom
length, angle and radius
Australia’s NEW Super ML Radio
Remote Transmitter gives the
operator remote access to load
weight and crane capacity
information.
Additional features include a
warning lamp and load factor bar.
Observe…
• The load factor bar
• Signal strength
Control…
• Crane operating speed
• All crane functions
• Warning horn and much more
SUPER STABILITY SYSTEM
Need to work next to heavy traffic?
Need to work overfront of truck?
Need to work in confined areas?
Just want to load or unload a light
item quickly?
Need to do all of that with the best
safety and control?
UNIC’s Super Stability System automatically…
THEN CHOOSE UNIC
•
•
•
•
Detects outrigger extension from nil to half to full extension.
Detects outrigger ground contact
Works three separate zones - left, right and overfront
Automatically adjusts the Moment Limiter to match the
stabiliser setting
• Automatically changes Moment Limiter as the boom slews
from zone to zone.
4
UNIC TRUCK M
The UNIC truck mounted crane incorporates
superior lifting performance, a wide working
range, ease of operation and second-tonone safety features to provide multipurpose
hydraulic cranes that are engineered to
handle a great variety of loading operations.
perations. In
addition to normal lifting operations,
s, UNIC truck
mounted cranes excel in work involving
ving the
lowering of cargo below ground level
vel via the
use of a winch. It offers excellent operational
perational
control and accurate load placement.
ent.
UNIC Truck mounted cranes provide
e an endless
variety of applications and supportt for many
industries including:
Transportation, Construction, Landscaping,
caping,
Lumber, Railroad Work, Iron & Steel Production,
Recycling & Salvage, Steel Erection,, Poles &
Signwork, Marine, Irrigation, and Drilling.
lling.
5
HIGH LEVEL PERFORMANCE
With its hoist-winch and long
straight telescopic boom, the
UNIC provides exceptionally high
level lifting performance.
OUNTED CRANE
MAXIMUM CONTROL & PRECISION
Controlling the speed from high to low
means maximum control in even the most
challenging situations.
OPERATION RANGE
A wide working range means that UNIC can
handle cargo in high places, below ground
or placed at a distance from the truck.
6
UNIC
URW230
series
Lifting capacity
2,330 kg
Max hook height
9.8 m
Number of booms
4
Recommended
min. chassis GVM
7,500 kg
URW260
series
Lifting capacity
2,630 kg
Max hook height
13.9 m
Number of booms
6
Recommended
min. chassis GVM
7,500 kg
URW290
series
Lifting capacity
3,030 kg
Max hook height
13.9 m
Number of booms
6
Recommended
min. chassis GVM
10,400 kg
URW340
7
TRUCK
series
Lifting capacity
3,030 kg
Max hook height
11.7 m
Number of booms
4
Recommended
min. chassis GVM
12,000 kg
CRANE LINE UP
URW370
series
Lifting capacity
3,030 kg
Max hook height
16.2 m
Number of booms
6
Recommended
min. chassis GVM
12,000 kg
URW500
series
Lifting capacity
3,030 kg
Max hook height
17.6 m
Number of booms
6
Recommended
min. chassis GVM
15,000 kg
URW540
series
Lifting capacity
4,050 kg
Max hook height
19.8 m
Number of booms
6
Recommended
min. chassis GVM
15,000 kg
URU800
series
Lifting capacity
8,200 kg
Max hook height
17.5 m
Number of booms
5
Recommended
min. chassis GVM
24,000 kg
8
URW230 series
2,330 kg
LIFTING CAPACITY
9.8
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
RADIO
REMOTE
CONTROL
SPECIFICATIONS
URW232
CRANE MODEL
Max lifting capacity
Min 0.59m, Max 4.23m
Min 0.6m, Max 6.23m
Min 0.68, Max 8.43m
Above ground
5.6m
7.6m
9.7m
Below ground
4.8m with 4-part line
Min 2.5m, Max 4.4m
Min 2.59m, Max 6.4m
Min 2.87m, Max 8.6m
2-section box beam type
telescoping boom
telescoping boom
telescoping boom
Boom length
Boom sections
Boom raise angle
1° to 76°
Slewing angle
360° continuous
Single line pull
Winch
URW234
Max 2330kg at 1.7m
Working radius
Max hook height
(approx.)
URW233
Wire rope
5.64kN {575kgf}
Construction: IWRC 6 x WS(26) GRADE B / Diameter x Length: 8mm x 34m /
Breaking strength: 42.4kN {4320kgf}
Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves /
Horizontal beams, manual extension type
Outriggers
Retracted: 1.546m, Extended: 2.6m, Mid-extended: 2.1m
Hydraulic pump
Rated pressure
Hydraulic oil tank capacity
Safety devices
9
20.6MPa {210kgf/cm2)
22L
Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom
telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom
angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for
winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm
buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection
76˚
Height Above Ground
(m)
(9.8)
9
4 Sections Boom
70˚
60˚
50˚
Maximum Working Radius
40˚
8
7
(m) 0
30˚
6
5
10˚
3
2
Working Radius
4
0.68 ~ 1.7
2.33
1˚
2
3
5
6
7
2.0
2.03
2.2
1.83
2.5
1.53
3.0
1.28
1.23
3.5
1.08
1.03
1
0 1 2
(0.68)
Height Above Ground
76˚
(m)
(7.7)
7
3
4
5
6
7
40˚
6
30˚
5
(m) 0
20˚
4
1˚
2
1
2
Working Radius
Height Above Ground
0 1 2
(0.60)
3
4
5
3
4
0.60 ~ 1.7
2.33
1
3
7.0
8.0
0.53 (6.53m)
0.36
0.31
8.43
0.29
W233
6.23m.
5
6
RATED LOAD
10˚
3
2
5.0
6.0
0.83 (4.63m)
0.68 0.58
0.53 0.43
3 Sections Boom
50˚
4
4.0
0.98
0.88
0.68
Working Radius
70˚
76˚ 70˚
8
(8.43) (m)
60˚
(m)
(5.7)
5
W234
RATED LOAD
20˚
4
1
8.43m.
2.0
2.03
2.2
1.83
2.5
1.53
3.0
1.28
1.23
3.5
1.08
1.03
4.0
0.98
0.88
5.0
6.23
0.88
（4.35m）
0.68
0.53
(6.23) (m)
Working Radius
2 Sections Boom
60˚
50˚
40˚
30˚
20˚
10˚
1˚
(m) 0
1
2
Working Radius
3
3
4
RATED LOAD
1
0 1 2
(0.59)
W232
4.23m.
(4.23) (m)
0.59 ~ 1.7
2.33
2.0
2.03
2.2
1.83
2.5
1.53
3.0
1.28
3.5
1.08
4.0
0.98
4.23
0.93
Working Radius
CRANE MOUNTING DIMENSIONS
CRANE MODEL
2
1
3
4
1,849
1,840
UR-W234
3,065
Min. 2,870 ~ Mid. 4,800 ~ 6,700 ~ Max. 8,600
UR-W233
2,784
Min. 2,590 ~ Mid. 4,520 ~ Max. 6,400
1,826
1,816
UR-W232
2,694
Min. 2,500 ~ Max. 4,400
1,826
1,816
1
2
175
176 176
STROKE
437
250
ROTATION CENTER
187
24
3
4
1,574
179
115
564
692
179
115
MAX
1,856
2,600
MID
2,100
MIN
1,726
TRUCK FRAME
389
STROKE
315 203
437
STROKE
379
Drawing: UR-W234 (Unit: mm)
10
URW260 series
2,630 kg
13.9
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
LIFTING CAPACITY
RADIO
REMOTE
CONTROL
SPECIFICATIONS
CRANE MODEL
URW263
URW264
URW265
URW266
2630kg at 1.6m
2630kg at 1.6m
2630kg at 1.5m
2630kg at 1.5m
Max working radius
6.43m
8.43m
10.63m
12.63m
Above ground
7.9m
9.8m
12m
Max 13.9m
Below ground
12.5m with 4-part
line
14.8m with 4-part
line
Min 2.79m, Max 6.6m
Min 2.87m, Max 8.6m
Max hook height
(approx.)
Boom length
3-section box beam
4-section box beam
5-section box beam
6-section box beam
type telescoping boom type telescoping boom type telescoping boom type telescoping boom
Boom sections
Boom raise angle
1° to 76°
Slewing angle
360° continuous
Single line pull
Winch
Wire rope
6.37kN {650kgf}
Construction: IWRC
6 x WS(26) GRADE B
/ Diameter x Length:
8mm x 44m / Breaking
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
8mm x 73.5m /
Breaking strength:
42.4kN {4320kgf}
Outriggers
Retracted: 1.726m, Extended: 3.0m, Mid-extended: 2.4m
Hydraulic pump
Rated pressure
Safety devices
11
Retracted: 1.71m
Extended: 3.4m
Mid-extended:
2.4m, 2.9m
22L
W266
6 Sections Boom
(m)10
23
4567
89
10
12.63m.
11
12
RATED LOAD
Working Radius
1.5
2.63
2.63
1.8
2.13
2.13
2.0
1.93
1.93
2.5
1.53
1.53
3.0
3.5
1.18 (3.08m)
1.23 1.03
1.23 1.03
4.0
4.5
5.0
5.5
0.93
0.88
0.68
0.83
0.73
0.60
0.38
0.73 (5.01m)
0.63 0.58
0.53 0.48
0.33 0.29
6.0
7.0
8.0
0.53
0.43
0.26
0.22
0.43 (6.93m)
0.36 0.31
0.22 0.19
0.18 0.15
9.0
10.0
0.29 (8.83m)
0.16 0.14
0.13 0.12
11.0
12.0
12.63
0.14 (10.73m)
0.11 0.10
0.10
5 Sections Boom
(m)10
23
456
78
W265
10.63m.
91
0
RATED LOAD
Working Radius
1.5
2.63
2.63
1.8
2.13
2.13
2.0
1.93
1.93
2.5
1.53
1.53
3.0
3.5
1.28 (2.98m)
1.28 1.08
1.23 1.03
4.0
4.5
5.0
5.5
6.0
7.0
8.0
0.98
0.88
0.68
0.78 (4.91m)
0.78 0.68
0.60 0.53
0.38 0.33
0.63
0.48
0.29
0.58
0.43
0.26
0.50 (6.83m)
0.36 0.31
0.22 0.19
9.0
10.0
10.63
0.29 (8.73m)
0.16 0.14
0.14
4 Sections Boom
(m)10
23
456
W264
8.43m.
78
RATED LOAD
Working Radius
1.6
2.63
2.63
1.8
2.23
2.23
2.0
2.03
2.03
2.5
1.53
1.53
3.0
3.5
1.43 (2.70m)
1.28 1.08
1.23 1.03
4.0
4.5
5.0
5.5
6.0
7.0
8.0
8.43
0.98
0.88
0.68
0.83 (4.63m)
0.78 0.68
0.58 0.53
0.63
0.48
0.58
0.43
0.53 (6.53m)
0.36 0.31
0.29
3 Sections Boom
(m)10
23
W263
6.43m.
45
6
RATED LOAD
Working Radius
1.6
2.63
2.63
1.8
2.23
2.23
2.0
2.03
2.03
2.5
1.53
1.53
1.23
3.0
3.5
1.43 (2.62m)
1.28 1.08
1.23 1.03
4.0
4.5
5.0
5.5
6.43
0.98
0.88
0.88 (4.55m)
0.78 0.68
0.63
0.53
CRANE MODEL
2
1
3
4
1,963
2,043
UR-W266
3,439
Min. 3,250 ~ Mid. 5,180 ~ 7,100 ~ 9,000 ~ 10,900 ~ Max. 12,800
UR-W265
3,339
Min. 3,150 ~ Mid. 5,080 ~ 7,000 ~ 8,900 ~ Max. 10,800
1,917
1,910
UR-W264
3,059
Min. 2,870 ~ Mid. 4,800 ~ 6,700 ~ Max. 8,600
1,854
1,844
UR-W263
2,979
Min. 2,790 ~ Mid. 4,720 ~ Max. 6,600
1,839
1,829
1
3
2
Drawing: UR-W266
(Unit: mm)
4
12
URW290 series
13.9
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
3,030 kg
LIFTING CAPACITY
RADIO
REMOTE
CONTROL
SPECIFICATIONS
CRANE MODEL
URW293
URW294
URW295
URW296
3030kg at 1.6m
3030kg at 1.6m
3030kg at 1.5m
3030kg at 1.5m
Max working radius
6.43m
8.73m
10.63m
12.63m
Above ground
7.9m
10.1m
12.0m
13.9m
Below ground
Min 2.79m, Max 6.6m
Min 3.17m, Max 8.9m
Max hook height
(approx.)
Boom length
3-section box beam
4-section box beam
5-section box beam
6-section box beam
Boom sections
Boom raise angle
1° to 76°
Slewing angle
360° continuous
Single line pull
Winch
Wire rope
7.35kN {750kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
8mm x 73.5m /
Breaking strength:
42.4kN {4320kgf}
Outriggers
Retracted: 1.71m, Extended: 3.4m, Mid-extended: 2.4m, 2.9m
Hydraulic pump
Rated pressure
Safety devices
13
22L
76˚
70˚
W296
6 Sections Boom
60˚
50˚
Height Above Ground
(m)
(13.9)
13
12
11
10
9
8
7
6
5
4
3
2
1
40˚
(m) 0
30˚
1
2
3
4
5
1.8
2.0
2.43 2.13
1.73 (2.20m)
2.5
1.73
1.53
6
0.78 ~ 1.5
3.03
Working Radius
10˚
1˚
3.0
1.43
1.28
0.93
3.5
1.23
1.08
0.83
76˚ 70˚
11
4.0
5.0
6.0
1.03 0.80 (5.01m)
0.93 0.73 0.60
0.73 0.58 0.48
0.48 0.38 0.30
0.28 (5.30m) 0.24
7.0
8.0
9.0
0.50 (6.93m)
0.41 0.36
0.26 0.23
0.21 0.18
10.0
12
11.0
12.0
12.63
0.33 (8.83m)
0.20 0.18 0.18 (10.73m)
0.16 0.14 0.13 0.13 0.10
W295
Height Above Ground
50˚
(m) 0
30˚
1
2
3
4
5
0.75 ~ 1.5
3.03
1.8
2.0
2.43 2.13
1.73 (2.20m)
2.5
1.73
1.53
6
7
Working Radius
10˚
1˚
3.0
1.43
1.28
0.93
3.5
1.23
1.08
0.83
4.0
1.03
0.93
0.73
0.48
5.0
6.0
0.83 (4.91m)
0.73 0.63
0.58 0.48
0.38 0.30
9
10
7.0
8.0
9.0
0.53 (6.83m)
0.41 0.36
0.26 0.23
10.0
0.33 (8.73m)
0.20
0.18
10.63
0.18
4 Sections Boom
60˚
50˚
40˚
30˚
(m) 0
20˚
1
2
3
4
5
1.8
2.0
2.55 2.28
1.88 (2.20m)
2.5
1.83
1.63
6
8.73m.
7
W294
8
RATED LOAD
10˚
Working Radius
1˚
76˚ 70˚
8
RATED LOAD
20˚
76˚ 70˚
10.63m.
40˚
Height Above Ground
Height Above Ground
10
5 Sections Boom
0.75 ~ 1.6
3.03
0 1 2 3 4 5 6 7 (8.73) (m)
(0.75)
Working Radius
(m)
(7.9)
7
6
5
4
3
2
1
9
60˚
0 1 2 3 4 5 6 7 8 9 (10.63) (m)
(0.75)
Working Radius
(m)
(10.1)
9
8
7
6
5
4
3
2
1
8
RATED LOAD
20˚
0 1 2 3 4 5 6 7 8 9 10 11(12.63) (m)
(0.78)
Working Radius
(m)
(12.0)
11
10
9
8
7
6
5
4
3
2
1
7
12.63m.
3.0
1.48
1.33
0.98
3.5
1.25
1.13
0.88
4.0
1.08
0.98
0.78
5.0
6.0
0.83 (4.93m)
0.78 0.63
0.63 0.53
7.0
8.0
8.73
0.58 (6.83m)
0.43
0.38
0.33
3 Sections Boom
60˚
50˚
40˚
30˚
20˚
10˚
1˚
(m) 0
1
2
3
W293
6.43m.
4
5
1.8
2.0
2.55 2.28
1.88 (2.20m)
2.5
1.83
1.63
6
RATED LOAD
Working Radius
0 1 2 3 4 5 (6.43) (m)
(0.66) Working Radius
0.66 ~ 1.6
3.03
3.0
1.48
1.33
3.5
1.25
1.13
4.0
1.08
0.98
5.0
6.0
0.93 (4.55m)
0.78
0.63
6.43
0.58
CRANE MODEL
2
1
3
4
1,963
2,043
UR-W296
3,439
Min. 3,250 ~ Mid. 5,180 ~ 7,100 ~ 9,000 ~ 10,900 ~ Max. 12,800
UR-W295
3,339
Min. 3,150 ~ Mid. 5,080 ~ 7,000 ~ 8,900 ~ Max. 10,800
1,917
1,910
UR-W294
3,359
Min. 3,170 ~ Mid. 5,100 ~ 7,000 ~ Max. 8,900
1,856
1,849
UR-W293
2,979
Min. 2,790 ~ Mid. 4,720 ~ Max. 6,600
1,859
1,851
195 195
250
1
2
175
STROKE
250
845
345
ROTATION CENTER
24
MAX
3,400 179
3
4
1,579
2,900
115
1,860
MID(2)
564
692
1,710 179
115
MID(1)
2,400
MIN
TRUCK FRAME
389
768
325 222
STROKE
STROKE
845
379
14
URW340 series
11.7
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
3,030 kg
LIFTING CAPACITY
RADIO
REMOTE
CONTROL
SPECIFICATIONS
CRANE MODEL
URW342
URW343
URW344
3030kg at 2.7m
3030kg at 2.7m
3030kg at 2.6m
Max working radius
5.32m
7.51m
9.81m
Above ground
7.3m
9.5m
11.7m
Below ground
Min 3.31m, Max 7.7m
telescoping boom
telescoping boom
telescoping boom
Max hook height
(approx.)
Boom length
Boom sections
Boom raise angle
1° to 78°
Slewing angle
360° continuous
Single line pull
Winch
Wire rope
7.35kN {750kgf}
Construction: IWRC 6
x WS(26) GRADE B /
Diameter x Length: 8mm x
40m / Breaking strength:
42.4kN {4320kgf}
x WS(26) GRADE B /
51m / Breaking strength:
42.4kN {4320kgf}
x WS(26) GRADE B /
62.5m / Breaking strength:
42.4kN {4320kgf}
Outriggers
Retracted: 2.0m, Extended 3.5m, Mid-extended: 2.7m
Hydraulic pump
Rated pressure
Safety devices
15
20.6MPa {210kgf/cm2}
32L
78 70
4 Sections Boom
60
50
Height Above Ground
(m)
(11.7)
11
10
9
8
7
6
5
4
3
2
1
40
(m) 0
30
1
2
3
4
5
6
7
9.81m.
8
W344
9
RATED LOAD
20
10
Working Radius
0.67 ~ 2.6 2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 9.81
3.03
2.63 2.33 1.98 1.68 1.48 1.28 1.18 (5.46m)
2.33 2.13 1.73 1.43 1.23 1.08 0.98 0.88 0.73 0.68(7.63m)
1.03 0.93 0.83 0.78 0.73 0.63 0.56 0.50 0.48
1
Height Above Ground
0 1 2 3 4 5 6 7 8 9 (9.81) (m)
(0.67)
Working Radius
(m)
(9.5)
9
8
7
6
5
4
3
2
1
78 70
3 Sections Boom
60
40
30
(m) 0
20
1
2
3
Height Above Ground
78 70
4
5
7.51m.
6
7
RATED LOAD
10
1
Working Radius
0.65 ~ 2.6 2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 7.51
3.03
3.03 2.48 2.03 1.73 1.53 1.33 1.28 (5.36m)
2.33 2.13 1.78 1.48 1.28 1.13 1.03 0.93 0.73 0.68
0 1 2 3 4 5 6 7(7.51) (m)
(0.65) Working Radius
(m)
(7.3)
7
6
5
4
3
2
1
W343
50
2 Sections Boom
60
50
40
30
20
10
1
(m) 0
1
2
W342
5.32m.
3
4
5
RATED LOAD
Working Radius
0 1 2 3 4 5 (5.32) (m)
(0.65)
Working Radius
0.65 ~ 2.5 2.7 3.0 3.5 4.0 4.5 5.0 5.32
3.03
3.03 2.53 2.08 1.78 1.58 1.38 1.33
CRANE MODEL
2
1
3
4
2,095
2,095
UR-W344
3,594
Min. 3,410 ~ Mid. 5,650 ~ 7,825 ~ Max. 10,000
UR-W343
3,494
Min. 3,310 ~ Mid. 5,550 ~ Max. 7,700
2,092
2,095
UR-W342
3,454
Min. 3,630 ~ Max. 5,510
2,092
2,095
195195
1
2
195
400
STROKE
750
ROTATION CENTER
350
25
3
4
MAX
3,500
MID
1,760
230
475
2,700
MIN
2,000 230
215
2,150
470
215
TRUCK FRAME
497.5
972.5
332 232
STROKE
475
STROKE
750
16
URW370 series
3,030 kg
16.2
LIFTING CAPACITY
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
RADIO
REMOTE
CONTROL
SPECIFICATIONS
CRANE MODEL
URW373
URW374
URW375
URW376
3030kg at 2.7m
3030kg at 2.6m
3030kg at 2.4m
3030kg at 2.4m
Max working radius
7.51m
9.81m
12.11m
14.42m
Above ground
9.5m
11.7m
14.0m
16.2m
Below ground
Min 3.31m, Max 7.7m
Min 3.54m, Max 12.3m Min 3.63m, Max 14.61m
Max hook height
(approx.)
Boom length
3-section box beam
4-section box beam
5-section box beam
6-section box beam
Boom sections
Boom raise angle
1° to 78°
Slewing angle
360° continuous
Single line pull
Winch
Wire rope
7.35kN {750kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
8mm x 73.5m/
Breaking strength:
42.4kN {4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
8mm x 62.5m/
Breaking strength:
42.4kN {4320kgf}
x WS(26) GRADE B/
Diameter x Length:
strength: 42.4kN
{4320kgf}
Outriggers
Hydraulic pump
Rated pressure
Safety devices
17
20.6MPa {210kgf}
32L
78˚
70˚
W376
6 Sections Boom
60˚
50˚
Height Above Ground
(m)
(16.2)
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
40˚
(m) 0
30˚
1
2
3
4
5
6
7
8
9
10
11
12
14.42m.
13
14
RATED LOAD
20˚
0.73 ~ 2.4 2.5
2.78
3.03
Working Radius
10˚
2.7
2.53
2.23
3.0
2.28
2.03
3.5
1.93
1.68
1˚
4.0
1.63
1.38
1.03
4.5
5.0
1.43 1.25
1.19 1.05
0.93 0.83
0.63
0.33(4.90m)
5.5 6.0
1.08 (5.66m)
0.93 0.83
0.78 0.73
0.55 0.48
0.30 0.28
7.0
8.0
9.0
10.0
11.0 12.0 13.0 14.42
0.68 0.63(7.85m)
0.63 0.53 0.48 0.43(10.04m)
0.40 0.35 0.31 0.28 0.25 0.23(12.23m)
0.25 0.23 0.21 0.19 0.17 0.16 0.14 0.13
0 1 2 3 4 5 6 7 8 9 10 11 12 13 (14.42) (m)
(0.73)
Working Radius
78˚
5 Sections Boom
70˚
60˚
W375
50˚
Height Above Ground
(m)
(14.0)
13
12
11
10
9
8
7
6
5
4
3
2
1
40˚
(m) 0
30˚
1
2
3
4
5
6
7
8
9
12.11m.
10
11
RATED LOAD
20˚
0.71 ~ 2.4 2.5
2.78
3.03
Working Radius
10˚
1˚
2.7 3.0 3.5 4.0 4.5
2.58 2.28 1.93 1.63 1.43
2.23 2.03 1.68 1.38 1.20
1.03 0.93
0.76
5.0 5.5 6.0
1.25 1.13 (5.59m)
1.05 0.93 0.83
0.83 0.78 0.73
0.63 0.55 0.48
7.0
8.0
9.0
10.0
11.0 12.11
0.68 0.63 (7.79m)
0.63 0.53 0.48 0.46(9.95m)
0.40 0.35 0.31 0.28 0.25 0.25
0 1 2 3 4 5 6 7 8 9 10 11(12.11)(m)
(0.71)
Working Radius
78˚ 70˚
4 Sections Boom
60˚
50˚
Height Above Ground
(m)
(11.7)
11
10
9
8
7
6
5
4
3
2
1
40˚
30˚
(m) 0
1
2
3
4
5
6
7
9.81m.
8
W374
9
RATED LOAD
20˚
10˚
Working Radius
0.67 ~ 2.6 2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 9.81
3.03
2.63 2.33 1.98 1.68 1.48 1.28 1.18 (5.46m)
2.33 2.13 1.73 1.43 1.23 1.08 0.98 0.88 0.73 0.68(7.63m)
1.03 0.93 0.83 0.78 0.73 0.63 0.56 0.50 0.48
1˚
Height Above Ground
0 1 2 3 4 5 6 7 8 9 (9.81) (m)
(0.67)
Working Radius
(m)
(9.5)
9
8
7
6
5
4
3
2
1
78˚70˚
60˚
3 Sections Boom
50˚
40˚
30˚
(m) 0
20˚
1
2
3
4
5
W373
7.51m.
6
7
RATED LOAD
10˚
1˚
Working Radius
0.65 ~ 2.6 2.7
3.03
3.03
2.33
0 1 2 3 4 5 6 7(7.51) (m)
(0.65)
Working Radius
3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 7.51
2.48 2.03 1.73 1.53 1.33 1.28 (5.36m)
2.13 1.78 1.48 1.28 1.13 1.03 0.93 0.73 0.68
CRANE MODEL
1
2
3
4
UR-W376
3,814
Min. 3,630 ~ Mid. 5,850 ~ 8,040 ~ 10,230 ~ 12,420 ~ Max. 14,610
2,114
2,212
UR-W375
3,724
Min. 3,540 ~ Mid. 5,780 ~ 7,980 ~ 10,140 ~ Max. 12,300
2,136
2,134
UR-W374
3,594
Min. 3,410 ~ Mid. 5,650 ~ 7,825 ~ Max. 10,000
2,095
2,095
UR-W373
3,494
Min. 3,310 ~ Mid. 5,550 ~ Max. 7,700
2,092
2,095
195 195
400
1
2
195
STROKE
1,090
350
340
ROTATION CENTER
25
2,150
MAX
3
4
4,200 230
215
MID(2)
1,760
3,400 475
470
MID(1)
2,700
MIN
2,020
230
215
TRUCK FRAME
511.5
983.5
332 232
STROKE
472
STROKE
1,090
18
URW500 series
3,030 kg
17.6
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
LIFTING CAPACITY
RADIO
REMOTE
CONTROL
SPECIFICATIONS
CRANE MODEL
URW503
URW504
URW505
URW506
3030kg at 4.1m
3030kg at 4.1m
3030kg at 3.9m
3030kg at 3.9m
Max working radius
8.1m
10.6m
13.12m
15.47m
Above ground
10.5m
13.0m
15.1m
17.6m
Below ground
Boom length
Min 3.57m, Max 10.84m Min 3.75m, Max 13.35m Min 3.93m, Max 15.71m
Boom sections
3-section box beam
4-section box beam
5-section box beam
6-section box beam
Max hook height
(approx.)
Boom raise angle
1° to 78°
Slewing angle
360° continuous
Single line pull
Winch
Wire rope
7.35kN {750kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
strength: 42.4kN
{4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
8mm x 81.5m /
Breaking strength:
42.4kN {4320kgf}
Construction: IWRC
6 x WS(26) GRADE B
8mm x 91.5m /
Breaking strength:
42.4kN {4320kgf}
Outriggers
Hydraulic pump
Rated pressure
Safety devices
19
20.6MPa {210kgf}
60L
Height Above Ground
(m)
(17.6)
W506
6 Sections Boom
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
(m)0
1
2
3
4
5
6
7
8
9
10
11
12
15.47m.
13
14
15
RATED LOAD
0.73 ~ 3.9
3.03
Working Radius
4.5
2.43
2.03
5.0
2.13
1.83
1.33
5.5
1.88
1.65
1.20
6.0
1.63
1.48
1.10
0.53
7.0
1.33
1.23
0.95
0.43
8.0
9.0
1.03 (8.48m)
1.03
0.88
0.83 0.73
0.38 0.38
10.0
11.0
12.0
13.0
0.78
0.65
0.33
0.73 (10.81m)
0.60
0.55
0.33
0.28
14.0
15.47
0.50 (13.14m)
0.28
0.25
0.23
0 1 2 3 4 5 6 7 8 9 10 1112 13 (15.47) (m)
(0.73)
Working Radius
(m)
(15.4)
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Height Above Ground
5 Sections Boom
(m)0
1
2
3
4
5
6
7
8
9
6.0
1.65
1.48
1.10
7.0
1.33
1.23
0.95
10
W505
13.12m.
11
12
13
RATED LOAD
0.70 ~ 3.9
3.03
Working Radius
4.5
2.43
2.03
5.0
2.13
1.83
1.33
5.5
1.88
1.65
1.20
8.0
9.0
1.08 (8.31m)
1.03
0.88
0.83
0.73
10.0
11.0
12.0
0.78
0.65
0.73 (10.71m)
0.60
0.55
13.12
0.50
0 1 2 3 4 5 6 7 8 9 10 11 (13.12) (m)
(0.70)
Working Radius
(m)
(13.0)
12
11
10
9
8
7
6
5
4
3
2
1
Height Above Ground
4 Sections Boom
(m)0
1
2
3
4
5
6
7
W504
10.60m.
8
9
10
RATED LOAD
Working Radius
0.67 ~ 4.1
3.03
4.5
2.58
2.03
5.0
2.28
1.83
5.5
1.93
1.65
6.0
1.73
1.48
7.0
1.40
1.23
8.0
9.0
1.13 (8.18m)
1.08
0.98
10.0
10.60
0.85
0.83
0 1 2 3 4 5 6 7 8 9 (10.60) (m)
(0.67)
Working Radius
(m)
(10.5)
9
8
7
6
5
4
3
2
1
Height Above Ground
3 Sections Boom
(m)0
1
2
3
4
5
W503
8.10m.
6
7
8
RATED LOAD
Working Radius
0 1 2 3 4 5 6 7(8.10) (m)
(0.66)
Working Radius
0.66 ~ 4.1
3.03
4.5
2.58
5.0
2.28
5.5
2.00
6.0
1.73
7.0
1.43
8.10
1.23
CRANE MODEL
1
2
3
4
UR-W506
4,139
Min. 3,930 ~ Mid. 6,330 ~ 8,720 ~ 11,050 ~ 13,380 ~ Max. 15,710
2,398
2,535
UR-W505
3,959
Min. 3,750 ~ Mid. 6,150 ~ 8,550 ~ 10,950 ~ Max. 13,350
2,359
2,363
UR-W504
3,779
Min. 3,570 ~ Mid. 6,000 ~ 8,420 ~ Max. 10,840
2,312
2,319
UR-W503
3,720
Min. 3,510 ~ Mid. 5,940 ~ Max. 8,340
2,312
2,319
250 250
1
2
240
400
STROKE
805
405
ROTATION CENTER
26
4
3
MAX
1,938
3,800
MID
3,000
240
520
2,370
MIN
2,190 240
TRUCK FRAME
642
STROKE
565
352 301
STROKE
805
20
URW540 series
4,050 kg
19.8
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
LIFTING CAPACITY
RADIO
REMOTE
CONTROL
SPECIFICATIONS
CRANE MODEL
URW543
W/WY
URW544
W/WY
URW545
W/WY
URW546
W/WY
URW547
W/WY
4050kg at 2.9m
4050kg at 2.9m
4050kg at 2.9m
4050kg at 2.9m
4050kg at 2.9m
Max working radius
8.1m
10.6m
13.12m
15.47m
17.78m
Above ground
10.3m
12.7m
15.1m
17.4m
19.8m
Below ground
9.4m with
4-part line
12.5m with
4-part line
15.5m with
4-part line
18.4m with
4-part line
21.5m with
4-part line
Min 3.51m
Max 8.34m
Min 3.57m
Max 10.84m
Min 3.75m
Max 13.35m
Min 3.93m
Max 15.71m
Min 3.99m
Max 18.02m
Hook height
(approx.)
Boom length
3-section box
4-section box
5-section box
6-section box
7-section box
beam type
beam type
beam type
beam type
beam type
telescoping boom telescoping boom telescoping boom telescoping boom telescoping boom
Boom sections
Boom raise angle
1° to 78°
Slewing angle
360° continuous
Single line pull
Winch
Wire rope
9.80kN {1000kgf}
Construction:
IWRC 6 x
WS(26) GRADE
B / Diameter x
Length: 8mm x
55m / Breaking
strength: 47.4kN
{4800kgf}
Construction:
IWRC 6 x
WS(26) GRADE
B / Diameter x
Length: 8mm x
68m / Breaking
strength: 47.4kN
{4800kgf}
Construction:
IWRC 6 x
WS(26) GRADE
B / Diameter x
Length: 8mm x
81.5m / Breaking
strength: 47.4kN
{4800kgf}
Construction:
IWRC 6 x
WS(26) GRADE
B / Diameter x
Length: 8mm x
91.5m / Breaking
strength: 47.4kN
{4800kgf}
Construction:
IWRC 6 x
WS(26) GRADE
B / Diameter x
Length: 8mm x
103m / Breaking
strength: 47.4kN
{4800kgf}
Outriggers
Hydraulic pump
Rated pressure
Safety devices
21
60L
W546W/WY
6 Sections Boom
15.47m.
RATED LOAD
Working Radius
0.73 ~ 2.9
4.05
4.05
3.05
3.5
3.35
3.35
3.05
4.0
4.5
3.20 (3.69m)
3.05 (3.9m) 2.45
3.05 (3.9m) 2.45
2.05
2.05
1.35
5.0
5.5
6.0
7.0
8.0
2.15
2.15
1.85
1.35
1.90
1.90
1.70
1.25
1.65 (6.09m)
1.65
1.35
1.50
1.25
1.15
1.00
0.55
0.45
9.0
10.0
11.0
12.0
1.05 (8.48m)
1.05
0.90
0.85
0.75
0.40
0.40
0.80
0.70
0.35
0.75 (10.81m)
0.65
0.60
0.35
0.30
13.0
14.0
15.47
0.55 (13.14m)
0.30
0.30
0.25
W545W/WY
5 Sections Boom
13.12m.
RATED LOAD
Working Radius
0.70 ~ 2.9
4.05
4.05
3.05
3.5
4.0
3.35 (3.51m)
3.35 3.05 (3.9m)
3.05 3.05 (3.9m)
2.05
4.5
5.0
5.5
6.0
7.0
2.45
2.45
2.05
1.35
2.15
2.15
1.85
1.35
1.90
1.90
1.70
1.25
1.70 (5.91m)
1.70
1.35
1.50
1.25
1.15
1.00
8.0
9.0
10.0
11.0
12.0
13.12
1.10 (8.31m)
1.05
0.90
0.85
0.75
0.80
0.70
0.75 (10.71m)
0.65
0.60
0.55
W544W/WY
4 Sections Boom
10.60m.
RATED LOAD
Working Radius
0.67 ~ 2.9
4.05
4.05
3.05
3.5
4.1
3.50 (3.33m)
3.35
3.05
3.05
3.05
2.05
2.05
4.5
5.0
5.5
6.0
7.0
2.60
2.60
2.05
2.30
2.30
1.85
1.95
1.95
1.70
1.8 (5.76m)
1.75
1.45
1.50
1.25
8.0
9.0
10.0
10.6
1.15 (8.18m)
1.10
1.00
0.90
0.85
CRANE MODEL
1
2
3
4
UR-W546W/WY
4,134
Min. 3,930 ~ Mid. 6,330 ~ 8,720 ~ 11,050 ~ 13,380 ~ Max. 15,710
2,405
2,545
UR-W545W/WY
3,959
Min. 3,750 ~ Mid. 6,150 ~ 8,550 ~ 10,950 ~ Max. 13,350
2,366
2,370
UR-W544W/WY
3,779
Min. 3,570 ~ Mid. 6,000 ~ 8,420 ~ Max. 10,840
2,319
2,326
1
2
240
Drawing: UR-W546W/WY
(Unit: mm)
3
4
1,945
645
293
SLEWING CENTER
342
2505
00
STROKE 1,305
555
MAX: 4,800 / MID2: 4,300 / MID1: 3,300 / MIN: 2,192
STROKE 1,305
STROKE 565
22
URU800 series
8,070 kg
17.5
APPROX.
m
MAX. HOOK HEIGHT
ABOVE GROUND
LIFTING CAPACITY
RADIO
REMOTE
CONTROL
SPECIFICATIONS
CRANE MODEL
URU805
8,200kg at 2.5m
Max working radius
15.6m
Max hook height
(approx.)
Above ground
17.5m
Below ground
Boom length
Min 4.4m to Max 15.9m
Boom sections
5-section box beam type telescoping boom
Boom raise angle
1° to 80°
Slewing angle
360° continuous
Winch
Single line pull
1,640kg 13.1kN {1333kgf}
Wire rope
Construction: IWRC 6 x WS(29) GRADE B / Diameter x Length: 9mm x 129m /
Breaking strength: 68.6kN {7000kgf}
Outriggers
Retracted: 2.26m, Extended: 5.1m
Hydraulic pump
Rated pressure
90L
Safety devices
Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and
boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders
/ Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical
brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm
/ Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection
23
URU-805-AU
5 Sections Boom
15.6m.
RATED LOAD
Working Radius
2.0
8.07
6.07
2.5
8.07
6.07
3.07
2.7
7.07
6.07
3.07
3.0
6.07
6.07
3.07
2.67
3.5
5.17
5.17
3.07
2.67
2.07
4.0
4.5
4.47 (4.10m)
4.57
4.12
3.07
3.07
2.67
2.67
2.07
2.07
5.0
5.5
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
15.6
3.67
3.07
2.67
2.07
3.32
3.07
2.67
2.07
2.97
2.87
2.67
2.07
2.37
2.37
2.12
1.97
1.97
1.72
1.72
1.72
1.52
1.52
1.57 (10.1m)
1.32
1.17
1.32
1.17
1.02
1.02
0.92 (12.7m)
0.87
0.77
0.67
0.57
CRANE MODEL
2
1
URU-805-AU
4,525
1
Min. 4,400 ~ Mid. 7,300 ~ 10,200 ~ 13,000 ~ Max. 15,900
3
4
2,424
2,458
2
300
Drawing: URU-805-AU
(Unit: mm)
4
654
(1767)
1,938
3
SLEWING CENTER
605
220
111
300
(473)
(597)
220
STROKE 1,420
MAX: 5,100 / MIN: 2,260
STROKE 1,420
24
NOTES
IMPORTANT NOTES
Trademarks are property of their respective owners.
Detailed product specifications can be found at www.uniccrane-global.com.
All measurements using the metric system, unless otherwise specified.
LEGAL
SPECIFICATION CHANGES
Furukawa Unic Corporation reserves the right to make changes in manufacturing to
comply with current or new engineering specification changes where applicable.
INSTALLATION COMPLIANCE
Before installing any crane, please observe the Vehicle Loading Limitations and
stability of the crane/truck combination. Australian Standard AS1418.11 provides
guidance for the installation, testing and certification of Vehicle Loading Cranes.
presented by
MAXILIFT AUSTRALIA PTY. LTD.
12-16 Dorset Street
Lonsdale, South Australia
Phone: (08) 8326 6300
Fax:
(08) 8326 4685
www.maxilift.com.au
Dealer Details

unic truck mounted crane

Transcription

Similar documents

Proceedings (14 MB PDF) - 4th CIRP Conference On Assembly

Truck-Mounted UNIC Crane UR-V500 Series For Heavy

Truck-Mounted UNIC Crane UR-V370 Series For Medium

Truck-Mounted UNIC Crane UR-V340 Series For Medium