PTO Clutch/Brakes for Outdoor Power Equipment

PTO Clutch/Brakes for
Outdoor Power
Equipment
Sealed bearings
with high temp
grease
Adjustable for wear
Solid forged rotor
Component
parts e-coated
Heavy duty
back plate
High temperature
Epoxy coil
Six spring armature
One piece design
pre-adjusted at factory
Typical Applications
Consumer Tractors
Landscape Machines
Contractor Mowers
Commercial Mowers
Reasons to Use an Electromagnetic PTO
Clutch/Brake
Industry compliance (ANSI B71.1)
Operator convenience
Compact clutch/brake combination
Easy installation
PTO Clutch/Brake:
These are bearing mounted clutch/
brakes normally mounted directly on the
engine shaft. They are designed to start
a cutting blade when turned on and to
help to slow the blade when turned off.
Other Products Available
From Ogura
2
1
4
3
1. Multiple disc clutches for use within a gearbox
2. Marine duty clutches for auxiliary driven
components (pumps, generators, compressors)
3. Tooth clutches to transmit the highest torque
in the smallest space with minimal backlash
6
100 Randolph Road
P.O. Box 5790
Somerset, NJ 08875-5790
Tel: (732) 271-7361
Fax: (732) 271-7580
www.ogura-clutch.com
[email protected]
4. Electric clutches for use on gas and diesel engine driven equipment
5. Electric clutches for pumps and compressors
6. Spring-applied brakes for stopping and holding applications for motors and automated
machinery
5