docball transfer conveyor
download 
Report Transcription
ball transfer conveyor
TRANSPORT Ball units · Ball transfer tables · Small roller conveyors Additional track widths, lengths, passages, as well as galvanised rollers and 45° curves on request. Illustrated with 90 degree bend, upright frame and single sided guide rails (accessory). Small roller conveyors Track sections, completely assembled (with conveyor rollers) Slight pitch facilitates transport flow For transporting goods with a min. length or min. Ø of 75 mm (= to 3 x axle spacing). Technical details Overall height 61.5 mm. Rollers protrude 1.5 mm above upper edge of sides. Modular system allows for expansion to build a complete conveyor system. Axle spacing = 25 mm. Sides Aluminium U-profile, 20 x 60 x 20 x 2.5 mm. Conveyor rollers Made of blue plastic tubing, Ø 20 mm. 40 rollers per metre. Sprung axle, Ø 6 mm. Ball bearings. Scope of delivery Track sections are completely assembled. Prices listed in table are without frame supports and accessories. Track width Overall width Max. load with 1 m frame support spacing mm mm kg 200 240 60 300 340 55 400 440 55 500 540 50 Straight 1 m Ref. £ 891 037-FN 891 142-FN 891 223-FN 716 126-FN Straight 1.5 m Ref. £ 891 045-FN 891 150-FN 891 231-FN 716 127-FN Straight 2 m Ref. £ 891 053-FN 891 169-FN 891 258-FN 716 128-FN 90° curve Inner radius 800 mm, split rollers Ref. £ 891 134-FN 891 215-FN 891 304-FN 891 371-FN kg mm mm 1.3 200 220 1.2 300 320 1.0 401 421 0.9 502 522 891 649-FN 891 657-FN 891 665-FN 891 673-FN 299.00 267.00 401.00 313.00 420.00 517.00 420.00 537.00 704.00 329.00 436.00 551.00 886.00 592.00 881.00 1517.00 Conveyor rollers Max. load Installation length Axle length Ref. £ 9.00 10.00 12.00 14.00 Accessories 1 Dual frame supports With swivel hinge, height adjustable, square 40 x 40 x 2 mm, zinc plated. Height up to top of support mm 330 – 480 380 – 580 470 – 750 580 – 950 730 – 1250 For 200 mm track width Ref. £ 977 617-FN 977 618-FN 977 619-FN 977 620-FN 977 621-FN For 300 mm track width Ref. £ 903 676-FN 903 678-FN 903 681-FN 903 683-FN 903 685-FN For 400 mm track width Ref. £ 977 622-FN 977 623-FN 977 625-FN 977 626-FN 977 627-FN For 500 mm track width Ref. £ 903 677-FN 903 679-FN 903 682-FN 903 684-FN 903 686-FN 2 End stops Made of zinc plated sheet steel, permanently mounted. Dual frame supports 1 Single sided guide rail and end stop 2 3 Side guide rails Tubular steel, zinc plated Ø 25 mm. Height adjustable from 50 – 130 mm. Available in two versions: for straight sections and curves. 3 73.00 69.00 73.00 69.00 For track width 74.00 69.00 74.00 71.00 mm Ref. £ For straight runs 80.00 76.00 84.00 77.00 80.00 79.00 81.00 76.00 88.00 77.00 79.00 200 300 400 500 891 762-FN 892 084-FN 892 092-FN 892 106-FN 47.00 44.00 47.00 47.00 length m 1 1,5 2 3 For one side Ref. £ 515 984-FN 515 985-FN 515 986-FN 515 987-FN For both sides Ref. £ 515 988-FN 515 989-FN 515 991-FN 515 992-FN 35.00 60.00 47.00 93.00 For 90° curves Ref. £ 4 Quick connectors (not shown) 95436 Required if roller conveyors are to be set up in successive rows. YELLOW = 5 working days 81.00 ALL ORDERS DELIVERED FREE SALES FREE FAX: 0800 0234 983 66.00 123.00 102.00 181.00 inside outside 903 690-FN 903 691-FN 53.00 76.00 Pack of 4. Ref. 515 993-FN £ / pack 27.00 KAISER + KRAFT EVERYTHING FOR THE BUSINESS. 173
