2012 Blue Press - Dillon Precision

Comments

Transcription

2012 Blue Press - Dillon Precision
the
November 2012
$2.95 U.S./$3.95 Canada
Blue Press
Which
Dillon
is
Right
for
YOU?
Page 20
Introducing:
Dillon’s
NEW .50 BMG
Primer Pocket Swager
D
P
Page 50
Dillon’s RF 100
Automatic Primer Filler
Eliminates the need
for primer pick-up tubes!
Fills the primer tube
while you reload!
Clear polycarbonate shield
and protective housing
D
illon’s RF 100 Automatic Primer
Filler eliminates the task of filling primer pick up tubes. Now you
simply pour your primers from their
box into the top, press the blue button and watch it run!
In about two minutes the primers
are inside the protective metal housing. That’s about 30 rounds you can
load while the RF 100 is doing your
work for you!
The RF 100 is available for either
large or small primers, and conversion kits are available at one low
price of $47.95 each.
Lg. Primer Filler K07-97077
Sm. Primer Filler K07-97111
Lg. (Euro. 220v) K07-97112
Sm. (Euro. 220v) K07-97113
Sm. Conversion K07-17903
Lg. Conversion K07-17902
Nylon Packcloth Dust Cover
K07-11143
$314.95
314.95
324.95
324.95
47.95
47.95
14.95
3
4
What’s Inside: We READ Our Mail!
I
It’s the Big One!
CZ USA’s
CZ 97B .45 ACP
Page 10
purchased one of your military primer
pocket swagers and it was one of the best
things I did. The ease in which it works is
amazing, the only thing that slows me down is
me. Anyone who reloads military cartridges and
doesn’t have one of these needs to have
his head examined. It’s that good!
Thanks for the invention.
Bob Takacs –
[email protected]
The only thing better for the purpose is the Super 1050
reloader, which has the primer pocket swager built in!
just received your September 2012 Blue Press and read
the shooting tip. As I am a disabled vet with only one
hand, I found this tip on clearing a double feed VERY
helpful. I’ll be practicing this routine often. In the past I
have struggled with clearing a double feed. I believe this
tip will help considerably. Thank you.
Earl Dickinson – South Central Pennsylvania
ell, I didn’t set the world on fire, but I did finally
qualify Marksman at the IDPA qualifier on Saturday.
Many thanks to Duane Thomas for his tips. This was my
fourth try in two years. I shot 40 points better than at any
of the other matches! Would have done better except for
mental errors on my part. Especially helpful: anchor nonshooting arm when shooting one handed, let recoil set
gun on next target, and snap your eyes to the next target.
Thanks again, Mr. Thomas!
David Connor – [email protected]
or years I have read and enjoyed articles written by
Jerry Ahern, some in The Blue Press. I always thought
that one day I’d run into him since we both lived in the
same area. But, I know now, that will never happen. I’ll
not be able to tell him how much I liked the thoroughness
and, at times, humor in his submissions. It’s too bad that
another good one is gone. I just hope he knew how much
he was appreciated.
Jim Kitchens – [email protected]
enjoyed Barrett Tillman’s article on sighting in [“10
Rounds, 30 Minutes & Gone” October 2012]. However,
if one must hurry all the time, something is wrong with
their lifestyle. My father is almost 90 years old and still
going strong. He is fast minded, but works slowly. He was
an awesome baseball player in his prime. He does not
hurry or worry.
Tom Howe – [email protected]
Your father obviously has the right approach to life, Tom!
Dylan Holsey
I
aka
“Rattlesnake
Wrangler”
Page 64
Product Index
Dillon Reloading Machines:
BL 550
13
Square Deal B
6-7
RL 550B
13-16
XL 650
22-23
SUPER 1050
30-31
SL 900 Shotshell Loader
38-39
BFR “Big Fifty Reloader”
50
RF 100 Automatic Primer Filler
3
Case Preparation Equipment
16-19
Vibratory Case Cleaners
18
Case/Media Separators
18
Dillon Progressive Reloading Dies
34-35
Redding Reloading Dies
52
Dillon Reloading Scales
78
Reloading Machine & Bench Accessories
33
Reloading Components
44-46
Books & Videos
62-63
Shooting Accessories:
Eye & Ear Protection
8-9
Dillon Ammo Boxes & Bins
36
Dillon Leather by Mitch Rosen
24-25
Concealed Carry Tote/“Plan B” Day Planner
47
Range Bag/Border Shift Ammo Bag/Pistol Cases 32
Revolver Parts & Accessories
56-57
Targets and Target Stands
54
Firearms Maintenance
66-67
Tools
53
Shooting Accessories by Manufacturer:
Arredondo Accessories
58, 59, 71
Blade-Tech Industries Holsters, etc.
28
CED Chronograph/Timer
42
C-More Sights
76
Chip McCormick Magazines
68
DeSantis Gunhide
28
Dewey Cleaning Supplies
67
Hogue Handgun Grips
49, 56
International Handgun Leather
27
Lone Wolf Distributors Glock Parts
58
Mec-Gar Pistol Magazines
70
Mernickle Holsters
29
ProMag Rifle Magazines
70
Safariland Holsters
26, 57
Streamlight Tactical Lights
46, 49, 53
Uncle Mike’s Kydex Holsters
27
Wilson Combat Magazines, Parts
68
W
F
I
On the Cover: Susie at the penthouse of the West 6th
Tempe (Arizona) Apartments (west6thtempe.com)
well armed with a 3” Ruger® GP-100® .357 Magnum.
THE
BLUE PRESS
Michael J. Dillon - Publisher
Mark G. Pixler - Editor
[email protected]
Gary Kieft - Technical Editor
Jeff Richards - Illustrator
Contributing Editors:
John Marshall
Peter Caroline
Duane Thomas
David Kopel
Barrett Tillman
D.K. Pridgen
Issue #245
November
2012
Copyright 2012 by
Dillon Precision
Products, Inc.
All the electrical and/or electronic components of Dillon equipment and all Dillon textiles are covered by a one-year warranty
from date of purchase. Any modifications performed to Dillon
machines, or the addition of any unapproved equipment, including automated or mechanical add-ons from other manufacturers,
is expressly not recommended and will void the Dillon warranty.
5
MODEL 512 GOLD WING
( MSRP $ 688)
MODEL 320 PUMP FIELD GR ADE
( MSRP $ 255)
THEDEFINITIONOFVALUE
Stevens shotguns – quality and features at unbelievable prices.
3!6!'%!2-3).#s7773!6!'%!2-3#/-
6
SQUARE DEAL ‘B’
STANDARD FEATURES:
SDB DVD
Instruction Manual
K07-19482 $19.95
• Automatic Indexing
• Available in 18 Handgun Calibers
• Loading Rate: 400-500 Rds./Hr.
• Comes With One Caliber Conversion
• Automatic Powder Measure
• Automatic Primer System
• Comes Complete With Dies
• Factory Adjusted, Ready-to-Use
• Lifetime “No-B.S.” Warranty
All for ONLY...
$
379
95*
Total price as pictured here with
optional accessories below: $555.75
SDB Strong Mount
K07-22223 $64.95
Low Powder Sensor
K07-16306 $41.95
Aluminum Bullet Tray K07-22214 $41.95
SDB Tool Holder with Wrench Set
K07-19441 $26.95
“SDB” Stock Numbers
.32 S&W Long/H&R Magnum*
K07-16815
$409.95
.380 ACP
K07-20053
.38 Special
K07-20102
.357 Magnum
K07-20103
.38 Super
K07-20099
.38 Super Comp
K07-20115
9mm
K07-20104
.40 S&W
K07-20787
10mm
K07-20643
.41 Magnum
K07-20054
.44 Special
K07-20105
.44 Magnum
K07-20052
.44-40 Winchester
K07-21036
.45 ACP
K07-20101
.45 Colt
K07-20051
.45 GAP
K07-20098
.45 S&W Schofield
K07-20418
7
SQUARE DEAL ‘B’ ACCESSORIES
A. SQUARE DEAL ‘B’ CONVERSION KITS
Change from one
caliber to another
in minutes. Conversion includes
carbide size die
(except .44-40),
expander/ powder
funnel, seat die,
crimp die,
shellplate and
locator buttons.
.32 S&W Long/H&R Mag. K07-16774
A.
$94.95
(.32 S&W Requires X-Small Powder Bar K07-20780 $29.95)
.380 ACP
.38 Special
.357 Magnum
.38 Super
.38 Super Comp
9mm
.40 S&W
10mm
.41 Magnum
.44 Special
.44 Magnum
.44-40 Winchester
.45 ACP/.45 GAP
.45 Colt
.45 S&W Schofield
K07-20246
K07-20240
K07-20240
K07-20229
K07-20275
K07-20241
K07-20469
K07-20469
K07-20247
K07-20242
K07-20242
K07-21035
K07-20123
K07-20248
K07-20417
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
84.95
SQUARE DEAL ‘B’ QUICK CHANGE (Not
Pictured) T oolhead and powder measure.
K07-16378, $98.95
‘SDB’ POWDER MEASURE K07-20001, $76.95
B. SQUARE DEAL
‘B’ TOOLHEAD
Extra toolheads
keep all your
adjustments the
way you left them.
K07-20113, $31.95
B.
C. SQUARE DEAL BENCH WRENCH
The Square
Deal Bench
C.
Wrench has the
correct sizes for
Square Deal “B”
die adjustments.
K07-19970,
$8.95 each. Buy two or more, $8.10 each.
D. MACHINE MAINTENANCE KIT
Everything you need to
keep your Dillon
loader cleaned and
lubricated up to factory
specifications. Available in combination
with a spare parts kit
for your machine.
Maint. Kit/SDB Spare Parts Kit K07-97015, $35.95
E. PRIMER PICKUP
TUBES
The secret of really
punching out a lot of
rounds in a hurry.
Have these tubes
filled and ready to
go. Your choice,
large or small.
F.
$7.99 each
or 4 for $23.95
1 Large pick up tube
K07-22029
1 Small pick up tube
K07-22028
2 Small, 2 Large
K07-20056
4 Large pick up tubes
K07-20050
4 Small pick up tubes
K07-20049
F. PRIMER FLIP TRAY
A high-quality tray large enough for the
al primer package.
E.
$7.99
7.99
23.95
23.95
23.95
Feder-
K07-13606, $19.95 each
G. MACHINE COVER
This great looking nylon cover
adds security to your loading
bench. Your reloader will be
protected against more than
dust as these covers come with
a D-ring that allows the heavy
duty zipper to be
locked.
Machine Cover,
K07-13795, $23.95
(H.) Master lock,
H.
K07-13083, $3.95
I.
G.
I. LOW POWDER SENSOR
Provides an audible and visual
reminder when it’s time to refill
your powder reservoir. When
the powder level drops to about
1000 grains, a buzzer will
sound and a bright red LED will
light.
K07-16306, $41.95
J. SDB SPARE PARTS KIT
Don’t risk downtime
waiting for a replacement part!
1 SD Shellplate Bolt
1 SD Ejection Wire
4 SD Wave Bearings
1 Toolhead Friction Plate
2 Pistol Decapping Pins
1 Small Primer Seat Punch
1 SD Slide Return Spring
1 #10 Tinnerman Insert
1 Bellcrank Cube
4 Locator Pins (#1, #2, #3, #4)
1 Indexer Return Spring
1 Large Primer Seat Punch
1 Primer Seat Punch Spring
2 Pickup Tube, Small, Yellow Tips
2 Magazine Orifices, Large
2 Pickup Tube, Large, Green Tips
1 3/16” Index Ball
2 Magazine Orifices, Small
2 Retaining Clips
1 SD Index Lever Assembly
2 Dispensing Tips, Large
2 Dispensing Tips, Small
K07-20778, $21.95
K. UNIVERSAL MOUNTING HARDWARE KIT
Includes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4
Flat Washers, 4-Fender Washers, 2-Wood Screws.
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
K07-14355, $5.49
8
HP1 Electronic Hearing Protector
• Protection Rating NRR 21
• External battery compartment
• Auto shut off extends battery life
• Extra-deep, replaceable ear pads
• Separate volume controls for each ear
• TRUE stereophonic sound
• Collapsible for ease of storage
• One-year warranty on electronics
D
illon’s HP1 Electronic Hearing Protector
amplifies weak sounds while at the same
time blocking out loud, harmful noise. During loud noises, the HP1 maintains a comfortable level of sound transmission – HP1
Hearing Protectors are designed to never
completely shut off. The Dillon HP2 Folding
Hearing Protector is comfortable to wear for
extended periods and folds for easy storage
when not in use.
HP2
Non-Electronic
Hearing Protector
Dillon
Hearing Protectors
HP1 (NRR 21) Electronic Hearing Protector, Blue
K07-10157 $135.00
HP1 Electronic Hearing Protector, Black K07-10156
135.00
HP2 (NRR 21) Non-Electronic Hearing Protector, Blue
K07-10361
19.95
K07-10360
19.95
Hearing HP2 Hearing Protector, Black
K07-19022
10.00
Protector HP1/HP2 Replacement Ear Cushions
K07-13020
3.29
Belt Clip Hearing Protector Belt Clip
9
$ 99
Bomber Glasses
Bomber Glasses’ lenses and
frames are made from HighIndex Polycarbonate that is
durable, flexible and impact
resistant. All colors provide
UV protection.
Clear
Smoke
Light Blue
Yellow
Amber
Smoke Mirror
K07-10513
K07-10514
K07-10515
K07-10516
K07-10517
K07-10518
EP3 Sonic Defenders
AO Safety/Peltor Junior
Eye & Ear Protection
and MAX Earplugs
MAX
MULTIMAX
AO Safety/Peltor Junior Eye & Ear Protection
Peltor Junior Earmuff (NRR 17)
K07-10402
AO Safety Junior Shooting Glasses
K07-11403
Save $4.95 when you buy Earmuff/Glasses Combo!K07-11092
MAX/MULTI-MAX Earplugs
MAX Earplugs (NRR 33) 200 Pack
K07-10456
MULTI-MAX Earplugs (NRR 31) 200 Pack
K07-17943
$22.95
9.95
27.95
$40.00
$50.00
E
ar Pro EP3 Sonic Defenders by SureFire protect you against
loud, harmful noises, yet allow normal conversations to be
heard; and the soft, hypoallergenic polymer provides all-day comfort. NRR 24
Small EP3 Sonic Defenders
K07-25340
$12.95
Medium EP3s (Fit Most People)
K07-25341
12.95
Large Ear Pro Sonic Defenders
K07-25342
12.95
®
®
This is an advertisement for Salute Products. Please contact them directly to purchase their targets.
It’s the Big One!
“The CZ 97B is a whole lot
of gun for the money.
It’s beautifully built,
and strong as an anvil.”
Reviewed by Peter Caroline
Master trainer Clint Smith once remarked,
“Your carry gun should be comforting, not comfortable.” For those of us who find it comfortable
to carry a small .380 auto or .38 snubby, this is not
a comforting statement. It is, however, gospel. And
it does give some serious motivation to those of us
who always carry, to at least gain some proficiency with the larger handgun calibers and the larger
handguns that go with them.
For many years, America’s favorite large carry
gun has been the Model 1911 .45. Like many
males my age, my first experience with that pistol was in the Army. It was a serious disappointment. I had been told, for years, “That Army .45
is a horrendous kicker; it will knock you on your
ass!” I braced myself for my first shot, and
squeezed the trigger. My first reaction was, “That
was it?!” My coach said, “Eight ring at 10
o’clock.” This was not quite the rite of passage
that I thought it would be.
Since that first exposure, I’ve had an enjoyable
relationship with the .45 ACP. And I’ve owned a
lot of pistols, and revolvers, in that caliber. At the
2012 SHOT Show, I stopped by the CZ-USA
booth. They always have lots of neat stuff, and this
year was no exception. I spotted one handgun that
seemed like it might be the best of all possible
worlds, the CZ 97B. This is basically a CZ 75, but
larger and chambered for .45 ACP. I’ve had a CZ
75 for years. Great gun with super ergonomics,
but I’d prefer something with a bit more authority
than a 9mm Parabellum. The CZ 97B is just that. It
does everything that the CZ 75 does, just bigger
and louder. I handed over a copy of my FFL and
requested a sample for review.
It took a few months to get the CZ 97B. Early
on, there had been some feeding issues with
“flying ashtray” type hollow points, but the CZ
people got it ironed out. I opened the box, and
my first reaction was, “Gawd, that is BIG!” Actually, the CZ 97B is about 1/4” shorter than a
11
CZ 97B .45 ACP
1911, 1/8” thicker, and one ounce heavier. It has
a 10-round, double-column magazine, so the
grip is thicker, more like the double-column
Paras. The slide rides inside the frame rails,
which makes for a bit more bulk than the 1911.
The gun has an even matte black polycoat finish
with checkered wood grips. The sights have three
illuminated dots and are square and quite clear.
The rear sight projects up high enough so you
could hook it into your belt and cock back the
slide one-handed. Like the CZ 75, this is a conventional double-action on the first shot, singleaction on following shots system, which can be
carried cocked and locked. There is an ingenious
spring-loaded pin that pops up to indicate a cartridge in the chamber. Takedown for cleaning is
quite similar to that of the 1911.
At the range, the first cartridges I tried were
Federal 230-grain Hydra-Shoks, just to see if the
gun would function well with jacketed hollow
points. No problems whatsoever. Same with a box
of 1960s-issue G.I. ball ammo, Winchester 185grain Silvertip HPs and some 230-grain copperplated RN reloads. Shooting the 97B is a very
pleasant experience. It’s not the least bit fussy
about your ammo selection. I would suspect,
though, that lightweight lead wadcutters would
not be appropriate. The single-action trigger pull is
a bit less than six pounds, but is smooth and feels
lighter. Even though I don’t have a large hand, I
had no problem when I tried the initial doubleaction trigger pull. I find the weight (48.5 ounces,
fully loaded) contributes to a more steady hold,
and I was quite happy with my offhand groups.
This is a gun that I intend to shoot quite often.
At an MSRP of $686, the CZ 97B is a whole
lot of gun for the money. It’s beautifully built,
and strong as an anvil. It comes in a lockable
hardcase, along with the obligatory cable lock, a
barrel bushing wrench and a mercifully brief but
clear instruction manual. If you’re going to carry
it – and that’s what it was made for – Bianchi
makes an AccuMold holster, Size 15, that fits the
97B quite well.
CZ-USA • P.O. Box 171073 • Kansas City, KS
66117-0073 • Toll-free:800-955-4486 •
913-321-1811 • Fax: 913-321-2251 •
E-mail: [email protected]
D
P
WANT TO RELOAD?
SAVE YOUR BRASS!
12
P
ick up your brass the easy way!
This takes the hard work out of
policing up your brass. No more
aching back from bending over or
kneeling at the range!
K07-21894
$44.95
THE SHELLSORTER
…is a simple product designed to reduce the
time you spend sorting brass, allowing you to
enjoy more time reloading and shooting.
The SHeLLSorter is comprised of three
pans designed to sort several common calibers. The fastest way to sort is to stack all
three of the pans together on a common
five-gallon bucket, yellow pan on top and
black on the bottom; in that way, with a few
shakes all your brass is sorted by caliber at the
same time.
The SHeLLSorter is made of ABS, a strong
plastic which will give a lifetime of service.
K07-19972
$39.95
®
™
Remington Golden Saber High Performance Jacket Ammunition
Because Bullseyes, Pepper Poppers and Zombies don’t SHOOT BACK!
A
superior bullet for when the stakes are
at their highest. Designed for law
enforcement and personal defense, the
Golden Saber™ High Performance Jacket
(HPJ) projectile successfully combines
match-type accuracy, deep penetration,
maximum expansion and near 100 percent
weight retention.
Made in the USA and sold
in Packages of 25 cartridges.
9mm Luger (+P), 124-Gr. Golden Saber HPJ
K07-21910 $20.95
.38 Special (+P), 125-Gr. Golden Saber HPJ
K07-21906 $21.95
.40 S&W, 180-Gr. Golden Saber HPJ
K07-21908 $22.95
.45 Auto, 230-Gr. Golden Saber HPJ
K07-21909 $25.99
.45 ACP (+P), 185-Gr. Golden Saber HPJ
K07-21911 $24.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
BL 550
Dillon’s
Basic Loader
95
259
K07-15399
$
Reloading Dies and Caliber Conversions sold separately
(see the back of the order blank
in the center of The Blue Press).
Pictured with optional accessories:
Strong Mount K07-22051 $47.95
Spares, Accessories & Upgrades 13
for AT 500s, BL 550s & RL 550Bs
AUTO PRIME SYSTEM
Includes:
Primer Housing /Shield
Primer Slides, Large/Small
Pickup Tubes, Large/Small
Pickup Tube Tips, Large/Small
Magazine Tubes, Large/Small
Mag. Orifices, Large/Small
Operating Rod
Primer Track Bearing
Housing Screws
Ret. Spring Retaining Pin
K07-16627, $82.95
PRIMER SYSTEM EARLY WARNING KIT
Allows you to focus on loading instead
of worrying about failing to seat a primer,
and is an easy slip-on attachment to the
auto prime system.
K07-20302, $25.95
AUTO POWDER SYSTEM
Accurate to within 0.1 grain,
our Automatic Powder Measure is
world renowned for its charge-tocharge consistency.
K07-20251, $87.95
OPTIONAL MAGNUM RIFLE POWDER BAR
K07-21353, $29.95
AUTO EJECT SYSTEM
Greatly increases your
ammo production capabilities
and adds a Cartridge
Chute/Bracket and a Cartridge
Bin to your reloader.
K07-22120, $30.95
D
illon’s RL 550B has long worn the title of “The
World’s Most Versatile Progressive Reloader,” and
stripping it down to its most basic form – Dillon’s BL
(Basic Loader) 550 – adds a whole new dimension
of versatility for the shooter/hunter who needs to
feed several rifles.
The BL 550 is essentially an RL 550B without the
automatic priming and powder systems. Capable of
loading over 160 calibers – just like the RL 550B – it
uses any manufacturer’s standard 7/8” x 14 reloading
dies. It’s priced comparably with other manufacturers’
turret presses; yet unlike them, it’s fully upgradeable
to Dillon’s Progressive RL 550B loader!
The interchangeable toolhead (Page 15) makes it
quick, easy and inexpensive to change calibers. For
example, if you load .30-06 for elk, .243 for deer and
.22-250 for coyotes, you don’t even have to change
the shellplate. You simply pull two pins and swap the
toolhead with your .30-06 dies to another toolhead
with your .22-250 or .243 dies in less than 30 seconds! The additional toolheads are $22.95 each, or
$20.95 each if you buy three or more – if you load for
several rifles it’s a no-brainer! Once you get your dies
adjusted, you’ll never have to re-set them.
A powder measure adapter (bottom right photo) is
available if you want to use a manual measure that
you already own. Or, if you want to weigh every
powder charge you load, it’s easy – you can use a
powder trickler with the powder die/funnel assembly
that comes with the BL 550.
AT 500 POWDER DIE
Extra powder dies allow you to
move your powder measure from toolhead to toolhead without changing the
“belling” adjustment.
Powder Die: K07-16629, $19.95
Oversize Die: K07-16626, $19.95
Plastic Funnel: K07-16617, $5.95
POWDER MEASURE
ADAPTER
If you load rifle cartridges with long-grain
extruded powder, you can
now use any manufacturer’s powder measure with
7/8” x 14 threads on your
RL 450, AT 500, BL 550 or
RL 550B. (Requires the
use of an RL 450 powder
die – see below.)
K07-20029, $21.95
RL 450 Powder Die:
K07-20308, $20.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
14
RL 550B
STANDARD FEATURES:
RL 550B DVD
Instruction Manual
K07-19483 $19.95
• Accommodates Over 160 Calibers
• Uses Standard 7/8” x 14 Dies
• Loading Rate: 500-600 Rds./Hr.
• Comes With One Caliber Conversion
• Interchangeable Toolhead Assembly
• Automatic Powder Measure
• Automatic Primer System
• Lifetime “No-B.S.” Warranty
All for ONLY...
$
439
95*
K07-14261
Reloading dies sold separately.
*Prices vary on exotic-caliber machines.
Total Price as pictured here with
optional accessories: $735.60
.45 ACP Die Set
K07-14404
$63.95
Strong Mount
K07-22051
$48.95
Alum. Roller Handle K07-17950
$44.95
Low Powder Sensor K07-16306
$41.95
Aluminum Bullet Tray K07-22214
$41.95
RL 550 Toolholder with Wrench Set
K07-11541
$28.95
Cartridge Case Bin/Bracket
K07-11185
$24.95
RL 550B ACCESSORIES
A. RL 550B
CALIBER
CONVERSION KITS
Contains:
Shellplate, powder
funnel and locator
buttons. Available
in all calibers;
please specify calA.
iber desired.
K07-RL550B CONVERSION $45.95 (Exotic calibers, $55.95)
B. AUTO POWDER
MEASURE SYSTEMS
Additional powder
measures stay on the
toolhead. Never change
powder measurements
again!
RL 550 Powder Measure
K07-20782, $76.95 ea.
Magnum Rifle Powder Bar
K07-21353, $29.95 each
X-Small Powder Bar
K07-20780, $29.95 each
I. PRIMER FLIP TRAY
K07-13606, $19.95 each
J. PRIMER PICKUP TUBES
I.
1 Lg. tube
1 Sm. tube
2 Sm., 2 Lg.
4 Lg. tubes
4 Sm. tubes
K07-22029
K07-22028
K07-20056
K07-20050
K07-20049
$7.99
7.99
23.95
23.95
23.95
K. 550 SPARE PARTS KIT
B.
1 Seating Punch, Small
1 #10 Tinnerman Insert
1 Primer Cup, Large
1 Primer Cup, Small
1 Bellcrank Cube
1 3/8” Index Ball
1 550 Brass Tip Set Screw
1 550 Ejector Wire
1 Cartridge Retaining Spring
1 550 Slide Return Spring
4 Locator Pins (#1, #2, #3, #4)
1 Seating Punch, Large
1 550 Index Ball Spring
2 Pickup Tube, Small, Yellow Tips
2 Magazine Orifices, Large
1 Toolhead Pin
D. POWDER DIES
D.
Extra powder dies allow you to
move your powder measure
from toolhead to toolhead
without changing the “belling”
adjustment.
K07-20064, $11.25 each
E.
Three or more, $10.15 ea.
X-Large Powder Die, K07-21253, $19.95 each
E. TOOLHEADS
Don’t adjust dies when switching calibers.
These precision tool holders hold your dies in
perfect alignment, making caliber changes
quick and easy.
K07-13909, $22.95 each
Three or more, $20.95 ea.
G. 1” BENCH WRENCH
K07-10842, $7.95 each
Two or more, $7.10 ea.
H.
$23.95 each
J.
C.
C. DELUXE QUICK
CHANGE ASSEMBLY
With a quick change
assembly and a caliber
conversion kit (SOLD
SEPARATELY), you can convert in less than a
minute. Complete with:
• Toolhead
• Powder Measure
• Powder Die
• Toolhead Stand
Price without Dies, K07-22058, $103.95
Loading dies sold separately on Pages 46, 47.
F.
15
H. RL 550B CASEFEEDER UPGRADE
Available for most pistol cartridges –
will not work with rifle cartridges.
Large Pistol K07-14450
Small Pistol K07-14451
$254.95 (110v US Model)
Large Pistol K07-14453
Small Pistol K07-14454
$264.95 (220v Euro Model)
CASEFEEDER CALIBER CONVERSIONS (Page 16)
F. TOOLHEAD STANDS
The ultimate in convenience for keeping your
reloading bench clean and
uncluttered.
K07-22055, $20.95 each
Three or more, $18.95 ea.
G.
K.
2 Pickup Tube, Large, Green Tips
2 Magazine Orifices, Small
1 550 Primer Cup Spring
2 Retaining Clips
2 Dispensing Tip, Large
2 Dispensing Tip, Small
1 Failsafe Bushing Rev. B
K07-20048, $18.95
L. MACHINE MAINTENANCE KIT
Provides you with everything
you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Available in combination with a spare parts kit for
your machine.
Maint. Kit & RL 550B Spare Parts Kit K07-97016, $32.95
M. LOW POWDER SENSOR
Provides an audible and visual
reminder when it’s time to refill
your powder reservoir. When the
powder level drops to about 1000
grains, a buzzer will sound and a
bright red LED will light.
K07-16306, $41.95
N.
M.
N. EQUIPMENT DUST COVERS
This packcloth nylon machine cover
comes equipped with a D-ring, allowing the heavy duty zipper to be locked.
RL 550B Cover, K07-13795, $23.95
(O.) Master lock, K0713083, $3.95
Quick-Change Cover (for
use with powder measure)
K07-11143, $14.95
O.
P. UNIVERSAL MOUNTING HARDWARE KIT
Includes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4
Flat Washers, 4-Fender Washers, 2-Wood Screws.
K07-14355, $5.49
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
16
A Casefeeder
UPGRADE
for YOUR
Dillon’s
Stainless Steel
Case Gages
RL 550B
254
$
.223 Remington
K07-13254
$25.95
.308 Winchester
K07-12867
$26.95
.30-06 Springfield
K07-12679
$27.95
.380 ACP
K07-15160
$15.25
9mm Parabellum
K07-15161
$15.25
.38 Super
K07-15158
$15.25
.38 Special
K07-15159
$15.25
.357 Magnum
K07-15163
$15.25
.40 S&W
K07-15164
$15.25
10mm
K07-15162
$15.25
.44 Magnum
K07-15165
$15.25
.45 ACP
K07-15166
$15.25
95*
110 Volt US Model
Large Pistol K07-14450
Small Pistol K07-14451
220 Volt Euro Model, $264.95
Large Pistol K07-14453
Small Pistol K07-14454
*Caliber Conversions sold separately.
Caliber
Conversions
for the
RL 550B Casefeeder
$23.95 Each
.25-20/.32-20 Winchester
.30 Mauser/7.62x25
.32 S&W Long
.32 H&R Magnum
9mm/9x21/.38 Super/.30 Luger
10mm/9x25 Dillon
.38 S&W
.38 Super Comp.
.38/.357 Magnum
.357 SIG/.40 S&W
.38-40/.44-40 Winchester
.41 Magnum
.44 Russian
.44 Special/.44 Magnum/.44 Colt
.45 GAP
.45 ACP/.40 Super/.400 Cor-Bon
.45 Auto Rim
.45 Colt/.45 S&W/.454 Casull
.45 Winchester Magnum
K07-14206
K07-14204
K07-14205
K07-14283
K07-14284
K07-14285
K07-14208
K07-14287
K07-14286
K07-14289
K07-14288
K07-14290
K07-14209
K07-14291
K07-11441
K07-14292
K07-19140
K07-14279
K07-14210
.45 Colt
K07-15167
$15.25
.45 GAP
K07-12672
$15.25
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
17
Dillon’
s
Rapid
Trim
1200B
Case
Trimmer
Makes short work out of trimming large quantities of rifle brass
Dillon’s
RT 1200B
shown
installed
on an
AT 500.
The RT 1200B is used just
like a standard size die. The big
difference is that while you are
pushing the case into the die to
size it, a 1/4 horsepower electric
motor driving a carbide cutter is
trimming the case to length.
Chips are drawn off through a
vacuum manifold that clamps to
the outside of the special
size/trim die. (Vacuum cleaner
and hose not included.) The RT
1200B is equipped with a quick-
disconnect power cord; and it
can be used on any standard
reloader, single stage or progressive.
The RT 1200B trimmer motor
K07-22080 is $234.95. (Available only in 110 volt 60 hz.)
Size/trim dies are sold separately (Please see chart below).
Replacement carbide cutting
blades, K07-13141, are $19.95
each. Upper lock rings, K0713559, are $4.99 each.
RT 1200B Size/Trim Die Calibers
.204 Ruger
.222 Rem.
.223 Rem.
.220 Swift
.22-250 Rem.
.243 Win.
.25-06 Rem.
6.5 x 55mm
.270 Win.
7mm Rem. Mag.
.30-30 Win.
.300 WSM
.308 Win.
K07-21028
K07-21363
K07-20107
K07-21364
K07-20110
K07-20109
K07-21367
K07-21495
K07-20112
K07-21366
K07-20111
K07-21029
K07-20106
MILITARY
BRASS?
$56.95
56.95
48.95
56.95
53.95
53.95
56.95
56.95
53.95
56.95
53.95
56.95
48.95
K07-20108
48.95
.30-06
.300 Win. Mag.
K07-21370
56.95
.300 Wby. Mag.
K07-21371
56.95
.303 Brit.
K07-21765
56.95
8 x 57 Mauser
K07-21502
56.95
.338 Win. Mag.
K07-21368
56.95
NOTE: The trimmer motor for the 7.62 x
39 and 6.8 SPC cartridges is not compatible with other size/trim dies.
Trimmer Motor
K07-22024
$239.95
6.8 SPC (trim die) K07-16391
56.95
7.62 x 39 (die)
K07-16390
56.95
Eliminate the “Grunt Work” with
Dillon’s Super Swage 600
U
ntil now, reusing military brass, with its crimped
primer pockets, has been a tedious task. The Dillon
solution is a remarkably simple device that bolts to your
bench and allows you to swage the primer pockets with
speed and ease. The case is supported from the inside, so
you won’t be tearing the rims off the brass. A tool
steel, hardened swage rod (easy to change from
large to small primers) simply rolls the crimp
away. No reaming is necessary. Our unique
compound cam leverage system assures
not only ease of operation,
but perfect alignment
with each and every
round. Sound simple?
It is and it works.
What’s more, it’s inexpensive. The Super
Swage 600 comes complete with large and small
swage rods.
K07-20095
$100.95
18
Dillon’s Case Preparation Equipment
CV-750 K07-19455 $144.95
CV-2001
K07-20493
$187.95
CV-2001 – The Industry Standard
Limited Work Space?
Dillon’s CV-2001 Vibratory Case Cleaner is the
largest in the industry. Its 12-1/2 quart bowl capacity
will allow you to polish up to 1,300 .38/.357 or 550
.30-06 cases per hour.
Not only is our capacity greater, but our motor is
larger in horsepower, internally cooled, thermally
protected, and turns on precision ball bearings. This
is no “hobby” machine!
The bowl and base are constructed of
7/32” thick injection molded high-strength
polypropylene which is impact and abrasion resistant.
Dillon’s introducing the new CV-750 heavy duty
Vibratory Case Cleaner for those with limited space.
This new case cleaner uses the same motor as the
CV-2001 and is every bit as tough – just more compact. To accompany the CV-750, the CM-500 does
the same job as the larger CM-2000 Case/Media Separator; and, like the CV-750, handles just about half
the capacity of the larger unit.
Case/Media Separators
After we sold thousands of our famous
first generation FL-2000 case cleaners, customers who had purchased them began
asking us to address the problem of separating the cleaned and polished brass from
the cleaning media.
We knew from the beginning that the
simplest method of separating would be a
rotating squirrel cage, but we had to find a
design we could manufacture economically. Our problem was that it had to be BIG –
big enough to handle the entire load of the
FL-2000 series case cleaners.
The solution was an injection molded
reversible part. Simple, and it works great.
Our device is large,
10” x 14”, and will hold more
than 1,600 .38 Special cases. It
sits on a large media collection
tub that measures 18” x 22”.
The tub keeps the mess off the
floor and bench.
It’s fast – so fast it will
remove media from 1500
rounds of .223 brass in a matter
of seconds.
CM-2000 Case/Media Separator K07-20675 $72.95
CM-500 Case/Media Separator K07-21045 $46.95
Although scaled down in size, these two pieces of
equipment are every bit as tough as their full-sized
counterparts. We used the same materials in their
construction and designed them to work just as hard
– and do it in a more compact area!
Attention European Customers:
Case Cleaners are available in 220 volt!
Euro CV-2001 K07-22047
Euro CV-750 K07-19473
$212.95
$169.95
All Dillon CV-2001 and CV-750 Vibratory Case Cleaners have a One-Year Warranty on the electric motor.
Rapid
Polish
290
SHINE? You bet your brass!
Dillon Precision has developed another exciting new
product to make your reloading faster and easier. Rapid
Polish 290 is the first cartridge
case finish designed specifically to bring a brilliant shine
(20 percent brighter than tumbling media alone) and a protective coating to reloaded
ammunition. Simply add several capfuls to the
media in your tumbler and run. Rapid Polish 290
has a great residual value and stays in your tumbling media. You’ll use less each time you clean
your cases.
Rapid Polish 290 contains no ammonia, so it
won’t weaken brass cases!
Rapid Polish 290
K07-13804
K07-20255
19
Dillon
Case
Lube
Rapid Lube 5000, Dillon’s
aerosol cartridge case lubricant, has been replaced by
an “environmentally correct,” non-aerosol case lube.
It works the same: Simply lay
your cases out, spray lightly
with one or two passes and
you’ve done it. No mess, no
guesswork. Within minutes
the lubricant distributes
itself around the cartridge
cases and you’re ready to load. Try a bottle.
You’ll never use a grease pad again.
D.C.L. Dillon Case Lubricant
8 oz. bottle
K07-13733
$8.95
Case (20 pc.)
K07-20256
135.95
Half and Half 10 bottles of polish /10 of lube
Case (20 pc.)
K07-21375
$135.95
Don’t Forget Polishing Media!
8 oz. bottle.
Case (20 pc.)
$8.95
135.95
Crushed walnut hull polishing media –
quickly cleans even the dirtiest of cases.
15-pound bag K07-13287 $23.95
Ground corn cob polishing media –
the best there is for that final polish.
10-pound bag K07-13496 $15.95
2013
Dillon Precision
Calendar
D
illon Precision’s 2013 calendar measures
15.5” x 26.5” with a calendar pad that’s
about 14” x 4” and the photos are generously
sized at 14” x 20”. As always, we hope you’ll
enjoy looking at this calendar as much as we
did putting it together it for you!
K07-19440
$12.95
1-2 Calendars, $12.95 each;
3+ Calendars $9.95 each
NEW!
20
Which Dillon is Rig
Square Deal “B”
RL 550B
D
M
illon’s Square Deal “B”
was designed to produce large amounts of
ammunition in the least
possible time for just a little
bit of money. At 300 to 400
rounds per hour, you can
produce enough ammo for
several pistol matches or
practice sessions in just a
few hours.
See Page 6
XL 650
D
illon’s XL 650
resulted from
several years of listening to our customers
expressing their fondest
wishes. We took every
good idea we and our
customers ever had,
tested them extensively,
and then incorporated
them all into the design
of the XL 650.
See Page 22
ore RL 550s have
been sold than any
other progressive
machine in the world,
and for good reason: The
RL 550B’s versatility is
almost unlimited. It will
load over 160 different
rifle and pistol calibers.
Its quick-change toolhead allows the
user to change
calibers without having
to readjust dies.
See Page 14
Dillon’s “Commercial” Machine:
Super1050
D
illon’s Super
1050 evolved
from the original RL
1050, and features a
lengthened frame and a
new crank assembly
that provides increased
functional stroke to
accommodate long rifle
cartridges, yet the handle
stroke is at a minimum,
meaning less work for the
operator. The Super 1050
is warranted for life from
defects in materials or
workmanship, plus a oneyear, 100-percent warranty against normal wear
and tear.
See Page 30
21
ght for YOU?
BL 550
RL 550B
With
Accessory
Casefeeder
D
illon’s RL 550B has
long worn the title
of “The World’s Most Versatile Progressive
Reloader,” and stripping it down to its
most basic form – Dillon’s BL (Basic Loader)
550 – adds a whole new
dimension of versatility
for the shooter/hunter
who needs to feed
several rifles.
See Page 13
Dillon’s “BFR”
Big Fifty Reloader
Y
ou KNOW you want
one! There’s nothing
quite as thrilling as touching off one of those .50
BMG cartridges and sending 750 grains of copper-jacketed lead
downrange. WAY
downrange! If the cost
of loaded .50 BMG
ammo has been putting you off,
you no
longer have
an excuse.
Join the ranks of
the LONG-range
target shooters and
roll your own .50 BMG
(and other long-range,
specialty cartridges) on
Dillon’s BFR.
See Page 50
A
dding an automatic casefeed system
to your RL 550B will
easily increase your
ammo production rate
by 25 percent or
MORE! The casefeeder
streamlines the loading process by reducing hand movement, and the
RL 550 Casefeeder uses
time-tested, proven
technology.
See Page 16
SL 900
Dillon’s
Shotshell
Loader
D
illon’s SL
900 is the
new standard in
shotshell reloading.
The SL 900 features
easily adjustable, caseactivated powder and
shot dispenser systems
that eliminate troublesome bushing
changes, along with
spilled powder and
shot.
See Page 38
22
XL650
STANDARD FEATURES:
• Automatic Indexing
• Uses Standard 7/8” x 14 Dies
• Loading Rate: 800-1000 Rds./Hr.
• Comes With One Caliber Conversion
• 5-Station Interchangeable Toolhead
• Automatic Powder Measure
• Automatic Primer System
• Lifetime “No-B.S.” Warranty
All for ONLY...
$
566
95*
K07-650
Reloading dies sold separately.
*Prices vary on exotic-caliber machines.
Total price as pictured here with
optional accessories: $1126.55
Electric Casefeeder
K07-210**
$218.95
Powdercheck System
K07-21044
$68.95
.45 ACP Die Set
K07-14404
$63.95
Strong Mount (550/650)
K07-22051
$48.95
Aluminum Roller Handle K07-17950
$44.95
Low Powder Sensor
K07-16306
$41.95
Aluminum Bullet Tray
K07-22214
$41.95
XL 650 Toolholder with Wrench Set
K07-11555
$29.95
XL 650 DVD
Instruction Manual
K07-19484 $19.95
23
XL 650 Accessories
A. XL 650 CALIBER
CONVERSION KITS
Include shellplate,
locator buttons, powder funnel and casefeed adapter parts.
Available in most calibers; please specify
caliber desired.
K. CASEFEED ASSEMBLY
Specify large pistol, small pistol, large rifle or small rifle.
$218.95 (110v),
$228.95 (Euro. 220v)
L.
L. EXTRA
CASEFEED
PLATES
A.
(You MAY need a different casefeed plate, see item L.)
K07-XL650 CONVERSION (Specify Caliber) $77.95*
*(All belted magnums and exotic calibers, $87.95 ea.)
B. POWDER MEASURE
K07-20782, $76.95 each
Magnum Rifle Powder Bar
K07-21353, $29.95 each
X-Small Powder Bar
K07-20780, $29.95 each
C. POWDER CHECK
K07-21044, $68.95 each
Three or more, $61.95 ea.
D. QUICK CHANGE
Toolhead, TH Stand and Powder Measure
K07-22059, $107.95
B.
C.
D.
E. PRIMER PICKUP TUBES
Used to transfer primers
from flip tray to priming
system.
1
1
2
4
4
Lg. tube
Sm. tube
Sm., 2 Lg.
Lg. tubes
Sm. tubes
K07-22029
K07-22028
K07-20056
K07-20050
K07-20049
F.
$7.99
7.99
23.95
23.95
23.95
E.
F. PRIMER FLIP TRAY
A heavy, high-quality tray large enough for the
Federal primer package.
K07-13606, $19.95 each
G.
G. TOOLHEAD STANDS
The ultimate in convenience
for keeping your reloading
bench clean and uncluttered.
K07-22055, $20.95 each
Three or more, $18.95 ea.
H. TOOLHEADS
I.
K07-13863, $27.95 each
Three or more, $25.95 ea.
I. POWDER DIES
Extra powder dies allow you to
move your powder measure from
H.
toolhead to toolhead without
changing the “belling” adjustment.
K07-20064, $11.25 each, three or more, $10.15 ea.
X-Large Powder Dies, K07-21253, $19.95 each
J. XL 650 PRIMING SYSTEM (Not Pictured)
Small Priming System
K07-21065 $80.95
Large Priming System
K07-20982 80.95
DON’T FORGET ONE OF THESE!
Universal Mounting Hardware Kit K07-14355 $5.49
1” Bench Wrench
K07-10842
7.95
Buy two or more Bench Wrenches for $7.10 each
$38.95/49.95
XL 650 Casefeed Assembly
Large pistol
(110v) K07-21080
(Euro. 220v) K07-97025
Large rifle
(110v) K07-21081
(Euro. 220v) K07-97022
Small pistol
(110v) K07-21079
(Euro. 220v) K07-97021
Small rifle
(110v) K07-21082
(Euro. 220v) K07-97023
XL 650 Casefeed Plate
Large pistol
K07-21072
$38.95
Large rifle
K07-21075
38.95
Magnum rifle
K07-18492
49.95
Small rifle
K07-21074
38.95
Small pistol
K07-21073
38.95
M. MACHINE MAINTENANCE KIT
Everything you need to
keep your Dillon loader
cleaned and lubricated up
to factory specifications.
Available in combination
with a spare parts kit for
your machine.
Maint. Kit & XL 650 Spare Parts Kit K07-97017, $39.95
N. SPARE PARTS KIT
Don’t risk downtime
waiting for a replacement part!
1 Priming Station Locator Tab
1 650 Ejector Wire
1 Slide Spring Pin
1 Indexer Spring
1 650 Primer Indexing Arm
1 650 Index Pawl
1 650 Primer Cam
1 650 Ring Indexer
2 Pistol Decapping Pins
1 650 Index Spring Revision A
1 #10 Tinnerman Insert
1 Index Arm Bowed Washer
1 Short Lever Spring
1 Bellcrank Cube
1 3/8” Index Ball
1 Powder Bar Spacer Plug
1 650 Brass Tip Set Screw
4 Locator Pins (#1, #2, #3, #4)
1 5/16” Index Ball
1 Tab/Spring Arm Spring
1 Case Insert Slide Spring
1 650 Pawl Spring
1 Indexing Arm Spring
1 Index Ball Spring
2 Pickup Tube, Small, Yellow Tips
1 650 Tool Head Pin
2 Pickup Tube, Large, Green Tips
1 Primer Cup Spring
2 Retaining Clips
2 650 Shellplate Cap
1 650 Primer Support Shim
1 Case Insert Slide Spring Cap
1 Priming Station Locator Tab
Bushing
2 Dispensing Tips, Large
2 Dispensing Tips, Small
1 Failsafe Bushing Revision B
K07-21146, $25.95
O. EQUIPMENT DUST COVERS
O.
This packcloth nylon machine cover
comes equipped with a D-ring, allowing
the heavy-duty zipper to be locked.
XL 650 Cover, K07-10443, $39.95
(P.) Master lock, K07-13083, $3.95
Quick-Change Cover (for use with
powder measure) K07-11143, $14.95
P.
Q. Q. LOW POWDER SENSOR
Provides an audible and visual
reminder when it’s time to refill your
powder reservoir.
K07-16306, $41.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
24
Dillon Leather by
When we lost our supplier for Dillon Leather, we considered abandoning the gunleather business.
Fortunately, we were able to team
up with Mitch Rosen Extraordinary
Gunleather to continue to offer a
best-quality, made-in-the-USA line of
belts and holsters. We know you’ll
like these products – we’re happy
to have our name on them.
Stylemaster-DL
A
$135
superior shoulder rig made of bestquality leather with solid brass fittings –
no cheap plastic, no soft suede or other
low-quality leather.
Beretta 92
Colt Gov’t. Model, Commander
Glock 17, 22, 31
Best-Quality Belt-DL
S
K07-18846
K07-18844
K07-18845
$70
imply the best GUN BELT you have ever owned. Full, double-thickness leather with solid brass buckle and hardware.
1.5” Gun Belt
32” Waist
34” Waist
36” Waist
38” Waist
40” Waist
42” Waist
44” Waist
MBS-DL
S
$50 5DM-DL
ingle mag pouch with snapon/snap-off belt loop.
1911
Beretta
Glock 17, 22, etc.
Glock 20, 21, etc.
K07-18847
K07-18848
K07-18849
K07-18850
D
K07-18859
K07-18860
K07-18861
K07-18862
K07-18863
K07-18864
K07-18865
$50 SOS-DL
ouble mag pouch with two
belt loops.
1911
Beretta
Glock 17, 22, etc.
Glock 20, 21, etc.
1.25” Gun Belt
32” Waist
34” Waist
36” Waist
38” Waist
40” Waist
42” Waist
44” Waist
K07-18851
K07-18852
K07-18853
K07-18854
O
K07-18873
K07-18867
K07-18868
K07-18869
K07-18870
K07-18871
K07-18872
$55
ne magazine, one tactical
light (fits 6P-size lights).
1911
Beretta
Glock 17, 22, etc.
Glock 20, 21, etc.
K07-18855
K07-18856
K07-18857
K07-18858
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
25
y Mitch Rosen!
5JR-DL
A
$75
full-length belt slide that offers all-day comfort
and superior concealment for an outside-thepants belt holster.
Beretta 92
Colt Government Model
Colt Commander
Colt Officers
CZ-75
Glock 17, 22, 31
Glock 19, 23, 32
Glock 26, 27, 33
Glock 20, 21
Makarov
SIG P220, P226
SIG P228, P229
S&W Military & Police 9mm/.40 Auto
S&W Military & Police .45 Auto
S&W 2” J-Frame Revolver
S&W 4” K-Frame Revolver
S&W 4” Lugged Barrel L-Frame Revolver
S&W 4” Light Barrel N-Frame Revolver
S&W 4” Lugged Barrel N-Frame Revolver
S&W 5” Lugged Barrel N-Frame Revolver
Springfield Armory XD 4”
Springfield Armory XD 5”
Ruger 2.25” SP-101 Revolver
K07-18817
K07-18810
K07-18811
K07-18812
K07-18823
K07-18813
K07-18814
K07-18815
K07-18816
K07-18819
K07-18818
K07-18827
K07-19011
K07-19012
K07-18820
K07-18821
K07-18822
K07-18824
K07-18826
K07-18894
K07-18825
K07-18874
K07-18828
Premier-DL
I
Colt Government Model
Colt Commander
Glock 17, 22, 31
Glock 19, 23, 32
SIG P220, P226
SIG P228, P229
1911 with Light Rail
Clipper-DL
El Raton-DL
T
$50
his pocket holster secures and properly positions
a J-Frame revolver in your pocket. Will not come
out when you draw.
2” J-Frame S&W Revolver
K07-18843
$90
nstead of traditional belt slots, the Premier-DL has
two wide straps that loop over the belt and lock up
with sturdy snaps. A great feature for those who prefer not to thread the belt through holster slots to put
on and take off the rig. Quick on, quick off, with excellent security.
O
K07-18836
K07-18837
K07-18838
K07-18839
K07-18840
K07-18841
K07-18842
$65
ur clip-on, inside-the-waistband holster features
a steel reinforced mouth and a high-quality
spring-steel clip.
Colt Commander
Colt Officers
Glock 17, 22, 31
Glock 19, 23, 32
Glock 26, 27, 33
S&W Military & Police 9mm/.40 Compact
K07-18833
K07-18834
K07-18829
K07-18830
K07-18831
K07-19013
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
26
CONCEALMENT
HOLSTERS BY
SAFARILAND
Safariland
Custom Fit
567
Safariland
Model
6377
ALS™
Safariland Custom Fit 567 Holsters
Safariland Model 6377 ALS™ Holsters
The Model 567 Custom Fit holster is one of the lightest, thinnest, best fitting concealment holsters available. True to its name, it adjusts to a wide variety
of popular handguns, giving each a “custom fit” in this holster.
The Model 6377 is a concealment version of the all new Automatic Locking
System series holster. Once the weapon is holstered, it locks into place, providing an extra measure of security from the standard open-top holster.
K07-19261
$43.95
2” Revolvers
4” K & L-Frame S&W, Ruger, and Colt Rev.
K07-19262
43.95
4” N-Frame S&W Revolvers
K07-19263
43.95
K07-19264
43.95
5” N-Frame S&W Revolvers
Beretta Compact, Taurus Compact, CZ-75, Colt Commander Model
K07-19265
43.95
Beretta, Taurus, Browning HP, Colt 1911
K07-19266
43.95
Colt Officers’ Model, Glock 19/23, SIG P228, HK USP Compact 9/40
K07-19267
43.95
Glock 17, 20, 21, 22, HK USP 9/40, Ruger P Series, SIG P220
K07-19268
43.95
Colt 1911
Glock 17/22
Glock 20/21
Glock 34/35
SIG 220/226
SIG 220/226 with Accessory Rail (no light)
SIG 228
S&W M&P 9/40
Springfield 4” XD 9/40
Springfield 5” XD 9/40
Springfield XDM 9mm
Springfield XDM .40
K07-40072
K07-19444
K07-19443
K07-40073
K07-19446
K07-19447
K07-19445
K07-19448
K07-40074
K07-40075
K07-40076
K07-40077
$39.95
39.95
39.95
39.95
39.95
39.95
39.95
39.95
39.95
39.95
39.95
39.95
Maverick Holsters, imported from South Africa exclusively by GUNFIGHTERS Ltd.
T
T
he Maverick “Tuckaway”
Holster allows you to wear
your handgun inside your
pants and under your shirt,
with only a small portion of
the belt clip visible. An affordable alternative holster for
deep-cover carry.
Sm. Rev. K07-18553 $14.95
Sm. Auto K07-18554 14.95
Med. Auto K07-18555 14.95
Lg. Auto K07-18556 14.95
he Maverick “Inside Clip
On” Holster is a high-quality, affordable inside-the-waistband holster with a sturdy belt
clip. The nylon web sight
channel means that the holster
will retain its shape for easier
reholstering.
Sm. Rev. K07-18549 $14.95
Sm. Auto K07-18550 14.95
Med. Auto K07-18551 14.95
Lg. Auto K07-18552 14.95
The Pistol Sheath by Center of Mass LLC
C
enter of Mass LLC’s Pistol Sheath is an
adjustable, ambidextrous, multi-fit
KYDEX® holster that is durable, affordable
and Made in Idaho!
The Small Pistol Sheath will hold all
1911s; Browning Hi Power; Buckmark 22.;
all Kahrs; Walther P-22, PP, PPK; Kel-Tec P-
Small Pistol Sheath
K07-13351
$24.95
11, PF9; Ruger LC9; Taurus Slim 9,.40;
CZ75s and Witness.
The Small Revolver Pistol Sheath fits all
J-Frame-Size revolvers, including the new
S&W Bodyguard, Ruger SP101 and LCR.
The Large Pistol Sheath will hold all
Springfield XDs; Glocks (excluding the G21
Small Revolver
K07-13375
$24.95
w/Picatinny rail); S&W M&Ps, SDs, Sigmas,
P99s; FNs; Walther PPS, P99; Hi Points; Taurus Millenium, Pro, 24/7, 809, 840, 845; HK
USP Compacts, P30, P30 Long, 45 Long,
P2000/2000SK; SIG Polymer frame pistols;
Ruger SR9, SR40, SR9C, SR40C, P345, P95;
and many others.
Large Pistol Sheath
K07-13358
$24.95
IHL
INTERNATIONAL HANDGUN LEATHER
27
by Ian Martin
IHL Ltd. Class Holster
IHL Solo Mag Pouch
IHL Hammerhead Shark
1911Slide
1911Pouch
K07-19230
K07-19231
$103.95
65.95
$34.95
Single Stack, Black
Single Stack, Brown
Double Stack, Blk.
K07-16446
K07-13145
K07-16447
IHL Speed Strip Wallet
IHL Belt Slide
Colt Gov’t, Black
Sm. Glock, Black
$45.95
K07-16468
K07-16469
.38/.357 6-rd.
.38/.357 8-rd.
.44/.45 6-rd.
.410 Ga. 6-rd.
.500 S&W 6-rd.
K07-18308
K07-18987
K07-18988
K07-18990
K07-18989
$26.50
$26.50
$26.50
$29.95
$26.50
Colt Gov’t, Black
Colt Gov’t, Brown
Colt Com, Black
Colt Ofcr’s, Black
Glock 17, Black
Glock 19, Black
IHL Prosecutor Holster
Ruger Alaskan (Pictured)
S&W Governor .410/.45, 2.75” bbl.
S&W .500 Mag., 4” bbl.
Taurus Judge 2.5”.410, 2” bbl.
$82.95
K07-16456
K07-14348
K07-16886
K07-16887
K07-16891
K07-16890
$79.95
K07-15038
K07-15041
K07-15039
K07-15040
THE WILDERNESS TACTICAL PRODUCTS
T
he
Wilderness’ Original
Instructor Belt is an incredibly strong belt with a specially
designed “V” ring buckle. Imitation is the sincerest form
of flattery, and the marketplace is full of copies of this
belt, but none can compare to the original.
We’re selling the five-stitch version, which has extra
stitch lines to make the belt more rigid vertically in
order to better support holsters, magazine pouches and
other gear. This belt is a favorite with law enforcement,
military personnel, firefighters, paramedics, etc. Note:
The 1.75” belt works best with BDUs or jeans. The 1.5“
belt features a scaled-down buckle.
Measured Waist
1.5” Belt
1.75” Belt
32” Waist
K07-10965
K07-10253
$39.95
34” Waist
K07-10966
K07-10128
39.95
36” Waist
K07-10967
K07-10129
39.95
38” Waist
K07-10968
K07-10130
39.95
40” Waist
K07-10969
K07-10131
39.95
42” Waist
K07-10970
K07-10132
39.95
44” Waist
K07-10971
K07-10133
44.95
46” Waist
K07-10972
K07-10889
44.95
Uncle Mike’s Kydex Holsters
M
$
95
26
ichaels of Oregon’s injection-molded Kydex
holsters have a level of detailing, quality
and affordability unmatched by other manufacturing methods. The almost-vertical rake allows
for behind-the-hip carry, and for some applications, the holster can function as a crossdraw.
Smaller-size holsters can also be used for
“appendix” carry. To aid concealment and to
assist in the draw, the holster rides close to the
body at a mid-level height. The injection-molded
belt loop is designed to accept and support a
variety of belts from 1” to 1.75” wide.
Colt 1911
K07-11214
Glock 17/22
K07-11216
Heckler & Koch USP
K07-14299
SIG 220/226
K07-11217
SIG 225/228-9
K07-14754
Springfield XD
K07-12081
S&W J-Frame
K07-11218
S&W M&P
K07-14301
Single-Stack 2-Mag. Carrier K07-11219 $22.95
Double-Stack 2-Mag. Carrier K07-11220 22.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
BLADE-TECH INDUSTRIES
28
holsters, magazine/speedloader pouches
“revolution” Holster Series
Blade-Tech used its extensive knowledge of Kydex© holstermaking to bring you the Revolution line of holsters. Using a proprietary blend of polymers, Blade-Tech has engineered these holsters to offer lifetime performance in a wide range of conditions. The holsters won’t become soft in extreme temperatures (over
300º F) and won’t become fragile in low temperatures.
Beretta 92
Colt 1911
Glock 17/22
Glock 19/23
Glock 20/21
Glock 34/35
Smith & Wesson 4” M&P
Springfield 4” XD 9/40
Springfield 5” XD 9/40
Single Mag
$19.99 ea.
1911
K07-40018
Sm. Glock
K07-40019
Lg. Glock
K07-40020
B92/XD/CZ etc. K07-40021
Double Mag $26.99 ea.
1911
K07-40022
Sm. Glock
K07-40023
Lg. Glock
K07-40024
B92/XD/CZ etc.K07-40025
K07-40015
K07-40011
K07-40012
K07-40013
K07-40069
K07-40068
K07-40067
K07-40071
K07-40070
Quad Mag
$39.99 ea.
1911
K07-40026
Sm. Glock
K07-40027
B92/XD/CZ etc.K07-40028
AR-15 Single Tek-Loc
Mag Pouch
K07-40034 $29.99
Blade-Tech Holster/Mag Pouch Hardware (above, left to right)
AR-15 Triple Dropped Mag Pouch
K07-40032 $74.95
Large Tek-Loc with hardware
K07-40029
Tek-Loc Dropped Offset Holster Attachment
K07-40016
Dropped Offset Holster Belt Loop Attachment K07-40017
$
95
29
$
$8.95
19.99
19.99
AR-15 Double Tek-Loc
Mag Pouch
K07-40033 $39.99
Double Speedloader Pouch
(Fits Safariland Comp 2/3)
K-Frame K07-40030 $44.95
L-Frame K07-40031 $44.95
32
$
$29.99
29.99
29.99
29.99
29.99
29.99
29.99
29.99
29.99
99
$
44
95
95
19
D
e Santis Gunhide’s Nemesis is an ambidextrous pocket
holster with a “sticky” texture that makes it more difficult
to draw the holster along with your handgun.
Seecamp .32, Beretta M21/ Jetfire/Minx, KelTec P32, NAA
Guardian .32, etc.
K07-18546
$19.95
Beretta Tomcat .32, NAA Guardian .32/.380, KelTec P32/P3AT,
Ruger LCP, Rohrbaugh R9, etc.
K07-18547
$19.95
S&W 2” J-Frame, Ruger 2” SP101, Taurus 2” 85, Beretta
84F/85F, Makarov, SIG P230, Walther PPK, etc.
K07-18548
$19.95
Beretta 9000S, Glock 26/27, Kahr K9/40, KelTec P11, S&W
CS9/40/45, Taurus PT111/140, etc.
K07-11144
$19.95
ew from De Santis is the Nemesis Cargo Pocket Holster. It
fits in your tactical shorts or BDUs and holds both your
back-up pistol and a magazine.
Beretta Tomcat .32, NAA Guardian .32/.380, KelTec P32/P3AT,
Ruger LCP, Rohrbaugh R9, etc.
K07-11707
$29.95
N
T
he De Santis Elastic Belly
Band accommodates
small autos and revolvers
with one reload and a pair of
handcuffs. Fastest when worn
under an un-tucked shirt, but
can be used with a tucked-in
shirt for deep concealment.
24”- 28” waist K07-18557
30”- 34” waist K07-18558
36”- 42” waist K07-18559
44”- 50” waist K07-18560
D
e Santis’ Apache ankle
holster’s wide, elastic
leg band largely eliminates
the unwanted rocking motion
commonly associated with
ankle holsters. A sheepskin
pad makes the Apache comfortable to wear.
J-Frame S&W K07-10651
Glock 26, 27 K07-10652
Sm. Autos (Beretta 21, etc.)
K07-10400
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
29
The Safepacker
T
HE WILDERNESS’ SAFEPACKER™ HOLSTER is the ONLY mode of
concealed carry that I have personally witnessed save a man’s life.
It’s a long story, but suffice it to say that the element of surprise afforded by the Safepacker did the trick. The folks at The Wilderness contend that the Safepacker™ is the best, most versatile and utilitarian
holster in the world. I tend to agree, because the one you see pictured
at left…is mine.
Mark Pixler, editor
The Safepacker can be hand carried like a day planner, equipped
with a shoulder strap (not included), slipped into an attaché case,
opened with the top flap stuffed between the mattress and box springs
on your bed, strapped to a seatbelt, attached to a sun visor, clipped to a
backpack, or worn on your hip as a very low-profile “un-holster.”
“Government Model” Safepacker, RH
K07-11703
$69.95
“Government Model” Fits: Colt Government Model, Glock 17/18/20/21/22, SIG P220/226, Beretta 92/96, HK USP-45, 4” K-Frame, 3” N-Frame, etc.
“Commander” Safepacker, RH
K07-11702
69.95
“Commander” Fits: Colt Commander, SIG P-245/229, HK USP-45 Compact, Tokarev, etc.
“Officers’ Model” Safepacker, RH
K07-11701
69.95
“Officers Model” Fits: Colt Officers’ Model, Glock 19/23/30/32/36, Para P-12, etc.
“Glock 26/27” Safepacker, RH
K07-11700
69.95
“Glock 26/27” Fits: G 26/27, Springfield XD Subcompact, Makarov, etc.
“J-Frame” Safepacker, RH
K07-11699
69.95
“J-Frame” Fits: S&W Centennial, Taurus M85, Walther PPK, KelTec P-11, etc.
“Mustang” Safepacker, RH
K07-11698
69.95
“Mustang” Fits: Colt Mustang, Pony, KelTec P-32, Beretta Tomcat, etc.
Mernickle
Holsters’
$
95
79
Conceal-Carry
Performance Series
I
f Cowboy Action Shooting is your
game, why not CARRY the gun you
shoot the most? These holsters can be
worn strong side, appendix carry or
cross draw and are fully molded. Now
also available for J-Frame S&Ws.
4-3/4” SA Colts/clones
K07-11560
4-5/8” Ruger Blackhawk K07-15765
2” J-Frame S&W Rev.
K07-15764
Ruger LCR
K07-29030
“Wild Bunch” 1911 Holster & Mag Pouch
T
his holster/mag pouch was designed in
a joint effort by World Cowboy Action
Shooting Champion Gene “Evil Roy”
Pearcey and World Fast Draw Champion
Bob Mernickle when SASS introduced the
“Wild Bunch” category for Cowboy
Action Shooting.
When these two champions put their
heads together, they created a holster
and mag pouch that look like they were
made at the turn of the century, yet feature state-of-the-art speed and accuracy.
The holster is hard molded so as not to
lose its shape even after thousands of
draws. It spaces the pistol’s grip frame
away from your body so you’ll get a full
combat grip, and the holster includes the
T-nut lock system to ensure that it stays
in place during a draw.
The mag pouch spaces the magazines so when you grab one mag, the
second isn’t in your way; above the
belt line so the belt doesn’t interfere
with the draw; and at the max depth
required by the sport – and no more –
so you’ll get a full grip and the ability
to index with your forefinger for a
rapid mag well insert.
1911 Holster K07-19947 $139.95
Mag Pouch
K07-19946
44.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
30
SUPER 1050
STANDARD FEATURES:
• Automatic Indexing
• Commercial Grade Machine
• Swages Military Primer Pockets
• Loading Rate: 1000-1200 Rds/Hr
• Includes One Caliber Conversion
• Factory Adjusted Reloading Dies
• Automatic Powder Measure
• Automatic Primer System
• Automatic Casefeeder
All for ONLY...
$
1669
95*
*Prices vary on exotic-caliber machines.
Super 1050 DVD
Instruction Manual
K07-19485 $19.95
SUPER 1050 Stock Numbers
K07-21130
.223 Remington
.223 Rem./Carbide (*$1743.95)
.22-250 Remington
.243 Winchester
K07-21131
K07-21129
K07-21126
.270 Winchester
6.8 SPC (*$1719.95)
.30 M1 Carbine (*$1684.95)
.300 WSM (*$1734.95)
.30-30 Winchester
7.62x39 (*$1719.95)
K07-18491
K07-21150
K07-21142
K07-21110
K07-21003
K07-21144
(7.62x39 comes with lg. and sm. primer systems)
Total price as pictured here with
optional accessories: $1822.80
Powdercheck System
K07-21044
$68.95
Low Powder Sensor
K07-16306
$41.95
Aluminum Bullet Tray
K07-22215
$41.95
.303 British
.308 Winchester
.308 Win./Carbide (*$1751.95)
.30-06 Springfield (*$1734.95)
.45-70 Gov’t (*$1779.95)
.32 S&W
.380 ACP
9mm Parabellum
.38 Special
.357 Magnum
.357 SIG (*$1699.95)
.38 Super
.38 Super Comp
.38-40 Winchester
.40 S&W
10mm
.41 Magnum
.44 Special
.44 Magnum
.44-40 Winchester
.45 ACP
.45 Colt
.45 GAP
.500 S&W (*$1734.95)
K07-21060
K07-21058
K07-21068
K07-21059
K07-21064
K07-21134
K07-21135
K07-21067
K07-21136
K07-21137
K07-21127
K07-21132
K07-21069
K07-21158
K07-21070
K07-21138
K07-21139
K07-21140
K07-21141
K07-21159
K07-21061
K07-21133
K07-21002
K07-20428
31
1050 Accessories
A(1). QUICK-CHANGE
TOOLHEAD CONVERSION
D. PRIMER PICKUP TUBES
Used to transfer primers
from flip tray to priming
system.
A(1).
Includes:
•Toolhead
•Powder Measure
K07-21393, $269.95
1
1
2
4
4
A(2). CALIBER CONVERSION
Includes:
•Shellplate
•Locator Buttons
•Swage Backup Rod/ Expander
•Casefeed Adapter
•Casefeed Plunger
•Powder Funnel
.32 S&W
.32 ACP
.380 Auto
9mm
.38 Super
.38 Super Comp
.38/.357 Magnum
.357 SIG
.40 S&W
10mm
.41 Magnum
.44 Magnum
.44-40 Winchester
.45 ACP
.45 Colt
.45 GAP
.475 Linebaugh/.480 Ruger
.500 S&W Magnum
.223 Remington
.22-250
.243 Winchester
.270 Winchester
.30 Carbine
7.62x39
.300 WSM
.303 British
.308 Winchester
.30-06 Springfield
.30-30 Winchester
.45-70 Government
K07-22029
K07-22028
K07-20056
K07-20050
K07-20049
$7.99
7.99
23.95
23.95
23.95
D.
E. PRIMER FLIP TRAY
A heavy, high-quality tray large enough for the
Federal primer package.
K07-13606, $19.95
A(2).
K07-20634
K07-20633
K07-20483
K07-20482
K07-20484
K07-21057
K07-20477
K07-20068
K07-20545
K07-20788
K07-20478
K07-20479
K07-21161
K07-20480
K07-20481
K07-21010
K07-20833
K07-20834
K07-20485
K07-21055
K07-21054
K07-21053
K07-20626
K07-20631
K07-20466
K07-21051
K07-21049
K07-21050
K07-21052
K07-21056
$117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
117.95
154.95
154.95
117.95
135.95
135.95
135.95
135.95
154.95
154.95
117.95
135.95
197.95
135.95
168.95
A(3). 1050 PRIMER SYSTEM
Large primer system conversion K07-20476 $105.95
Small primer system conversion K07-20419 105.95
A(4). EXTRA CASEFEED PLATE
Large pistol
K07-21072 $38.95
Large rifle
K07-21075
38.95
Small rifle
K07-21074
38.95
Small pistol
K07-21073
38.95
1050 POWDER MEASURE
K07-20421 $81.95
1050 TOOLHEAD
K07-20420 $197.95
B.
Lg. tube
Sm. tube
Sm., 2 Lg.
Lg. tubes
Sm. tubes
E.
B. LOW POWDER SENSOR
Provides an audible and visual
reminder when it’s time to refill
your powder reservoir. When the
powder level drops to about
1000 grains, a buzzer will sound
and a bright red LED will light.
K07-16306, $41.95
C. POWDER CHECK SYSTEM
Developed for the XL 650, now available for the 1050!
K07-21044, $68.95 each
Three or more, $61.95 ea.
C.
F. 1050 MACHINE COVER
F.
This great looking nylon cover
adds security to your loading
bench. Comes equipped with a
D-ring, allowing the heavy-duty
zipper to be locked.
G.
Cover,
K07-13239, $39.95
(G.)Master lock,
K07-13083, $3.95
H. RL 1050 BULLET TRAY
H.
Designed for “economy
of motion” when loading. Our new bullet tray
is made of durable cast
aluminum and is Dillon
Blue powder coated.
K07-22215, $41.95
I. SPARE PARTS KIT
1 Super 1050 Spring Bushing
1 Cam Guide Bolt 1/4-20
1 Super 1050 Toolhead Spring
1 Priming Station Retaining Tab
1 Ratchet Restriction Tab
4 Lock Ring Inserts
3 Pistol Decapping Pins
2 #10 Tinnerman Inserts
1 1/4” E-Clip
3 Bellcrank Cubes
2 Primer Punch Springs
2 1/4-20 3/8 BH Screws
4 Locator Pins (#1, #2, #3, #4)
1 Tab/Spring Arm Spring
2 Pickup Tube Tips, Small (Yellow)
2 Magazine Orifices, Large (Red)
2 Pickup Tube Tips, Large (Green)
2 Magazine Orifices, Small (Blue)
2 Retaining Clips
1 Slide Roll Pin Sleeve
2 Dispensing Tips, Small
2 Dispensing Tips, Large
K07-20779, $32.95
J. MACHINE MAINTENANCE KIT
Everything you need to
keep your Dillon loader
cleaned and lubricated up
to factory specifications.
Available in combination
with a spare parts kit for
your machine.
Maint. Kit & 1050 Spare Parts Kit K07-97018, $46.95
K. K. 1” BENCH WRENCH
K07-10842, $7.95 each.
Two or more, $7.10 each.
L.
L. BUSHING DRIVER
K07-20341, $12.95 ea.
M. MOUNTING HARDWARE KIT
Includes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4
Flat Washers, 4-Fender Washers, 2-Wood Screws.
K07-14355, $5.49
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
32
Dillon Range Bag
D
illon’s redesigned Modular
Range Bag features a MOLLE-style fastener
system to make it easy to reconfigure the bag to fit your
individual needs. The end compartments and side compartments are removable, and extra end compartments
are available.
The Range Bag comes with a removable, open-topped
Stage Bag, so you can carry your ammo to shoot a stage
without having to take the entire bag. The main compartment is designed to hold the Stage Bag or a Border Shift
Ammo Bag (sold separately below), as well as a Dillon
Large Utility Box.
Range Bag, Black 17”x11”x10” K07-19258
$99.95
Extra Stage Bag (inset, top right) K07-19259
29.95
Extra End Compartment (inset)
K07-19260
14.95
Large Utility Box (inset, above)
K07-17195
4.95
Pistol Pouch, Black
K07-17027
10.95
‘Border Shift’ Ammo Bag
D
illon’s two-compartment ammo bag is constructed
with a flexible inner liner that will allow the entire
volume to be accessible from either zippered opening.
You’ll never again mix fired brass with loaded rounds!
I.D. Card Holder
K07-14575 $2.95
Black Ammo Bag
K07-13755
$25.95
Dillon
Pistol
Cases
P
rotect your handguns with
Dillon’s rugged, padded
nylon pistol cases. These cases
feature a pouch on one side for
cleaning gear or other accessories and magazine/
speedloader pouches on
the other. The “Small”
Dillon Pistol Case will
accommodate most “Limited”
class autos and the “Large” case
will accept pistols with scopes
and extended compensators.
Small – 7.5”x 11.5”
K07-10161 $18.95
Large – 9.5”x12.5”
K07-10162
21.95
Dillon Reloading Accessory Package Deals! 33
D
illon’s Package Deals include: either Dillon’s D-Terminator
Electronic Scale or Eliminator Balance Beam Scale, a Dial
Caliper, a Primer Flip Tray, a Bench Wrench, an 8 oz. bottle of
Case Lube, a pair of clear safety glasses, a machine cover and
the latest edition of the Lyman Reloading Handbook.
Package Deal for:
SDB (Balance Beam Scale)
RL 550B (Balance Beam Scale)
XL 650 (Balance Beam Scale)
SDB (Electronic Scale)
RL 550B (Electronic Scale)
XL 650 (Electronic Scale)
Stock No..
K07-14482
K07-21143
K07-21430
K07-14483
K07-22117
K07-22118
Price
$182.95
181.95
197.95
251.95
250.95
266.95
Strong Mounts RL 550B/XL 650 Roller Handle
I
Toolhead Stands D
ncrease the
stability of
your reloading bench
with Dillon’s
new Strong
Mounts. These
heavy gauge
steel Strong
Mounts increase the machine’s “footprint” to over 10”, spreading the load
over the whole bench instead of stressing the leading edge.
Strong Mounts raise your machine
6” to 8”, providing a comfortable work
height for people who prefer to stand
while reloading. For some XL 650 owners, overhead clearance can become a
problem, so we designed a mount especially for this application. The XL 650only mount raises the machine 6” above
the bench top.
All mounts come with all the fasteners necessary to mount your machine
(550/650 mount includes RL 550B bin
bracket) and are coated with a durable
black wrinkle finish.
SDB Mount
RL550/XL650
XL650-only
K07-22223 $64.95
K07-22051 48.95
K07-22052 45.95
T
his allmetal
stand provides a place
to store your
complete caliber conversions: toolhead, reloading dies, powder measure, shellplate
and locator buttons. The mounting system makes it possible to secure the
toolhead stands to your bench, keeping
them from getting knocked over by
your well-meaning-but-clumsy shooting
buddies.
Dillon’s new toolhead stands are
finished with a high-quality, durable
powder coating designed to meet the
needs of even the highest volume, commercial reloading operation. They are
available individually or in packages of
three, and are packaged with reloading
data labels to help you record your
favorite loads.
illon’s accessory handle gives
your reloader an
entirely new “feel.”
A roller handle
reduces operator
fatigue during long
reloading sessions
and makes primer
seating easier.
Alum. Roller
Plastic Roller
K07-17950 $44.95
K07-22183 40.95
RL 450 Upgrade
Y
ou can, either all at once or one
assembly at a time, upgrade your RL
450 reloader to an RL 550B!
RL 450 Upgrade Components
Frame Change Kit
K07-20094 $94.95
Powder Measure /Failsafe K07-20251 87.95
Auto Prime Syst.
K07-20055 85.95
Auto Eject Syst.
K07-20002 59.95
Primer Early Warning Syst. K07-20302 25.95
Bullet Puller
550/650 Stand K07-22055 $20.95 ea.
Three or more, $18.95 ea.
Bullet Tray Kits Low Powder
D
Sensor
illon’s
original
RL 1000 came
equipped with
a simple, shallow aluminum bullet
tray that was
designed for economy of motion when
loading. For years, our attempts to
duplicate the efficiency and the “feel” of
that tray in other machine applications
were less than satisfactory. It took the
development of the Strong Mount for
the RL 550 and the XL 650 to enable us
to place the redesigned tray exactly
where it needed to be.
Our aluminum tray works on the
Square Deal ‘B’, the RL 550B and XL
650 when equipped with the RL 550/XL
650 Strong Mount, and a separate kit is
available for the RL 1050. Comes with a
Dillon Blue powder coat finish.
Bullet Tray Kit
RL 1050 Tray Kit
K07-22214 $41.95
K07-22215 41.95
D
illon’s new
Low Powder
Sensor provides an
audible and visual
reminder when it’s
time to refill your
powder reservoir.
When the powder
level drops to
about 1,000 grains
remaining in the
reservoir, a buzzer
will sound and a
bright red LED
will light.
This simple,
but effective, device is designed to fit all
Dillon powder measures. Made of clear
polycarbonate, it simply replaces the
die-cast metal lid supplied with the
measure, and operates on two AAA batteries (included).
N
obody’s perfect. A bullet puller makes it
easy to recover all your components.
Bullet Puller
K07-17999 $29.95
Puller Cap
K07-17948
4.95
Collet Set
K07-17947
5.99
QuickChange
Dust
Cover
Quick-Change Cover for use with powder
measure.
K07-11143 $14.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Sensor
K07-16306 $41.95
34
Dillon’s Pistol Die Sets
Size Die
Unique
Floating
Decap
• Floating Decap Assembly Eliminates
Assy.
Primer “Draw Back”
Hex adjustments
for wrench
Quick-release
die inserts
• Long, Tapered Carbide Ring
• Radiused Opening Makes Progressive
Loading Smoother
Seat Die
Long,
tapered
carbide
ring
Vented
seating
stem
Crimp Die
Heavy,
headed
decap pin
Large,
radiused
mouths
• Reversible Seating Stem Makes it
Easy to Change Bullet Styles
• Quick Disassembly, Easy to Clean
Radiused
carbide
Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating
decap assembly” with a snap spring that throws the spent
primer off the pin and eliminates the problem of primer
“draw back” that often occurs when decapping military
brass. The primary feature of Dillon’s size die design – the
long, tapered carbide ring with a radiused opening –
remains unchanged.
That radiused opening, and its importance to progressive
reloading, is one of the reasons why our seat and crimp dies
are better. We found a way of manufacturing these dies that
has enabled us to make the lead-in radius even bigger! The
bigger radius makes progressive loading with our equipment
even smoother – but that’s still only a part of the story.
Bullet Seating Die
Our new quick-disassembly seat die allows the user to
disassemble and clean the seat die without losing adjustment.
In this manner, bullet lube and shavings can be quickly
removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a
clip that enables you to remove the die insert and change the
seating stem from round nose to semi-wadcutter without
unscrewing a seating stem out of the die body. We’ve always
included both types of seating stems, but the new doubleended design makes it a simple matter to remove a pin,
reverse the seating stem, make any minor seating depth
adjustments that may be necessary and go on loading in a
fraction of the time it used to take.
Crimp Die
We’ve made it easy for you to remove the die insert for
cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of
crimp, you’ll never have to change it. This is especially good
news for all of you who load lead bullets! Before, you had to
unscrew the die from the toolhead and disassemble the die in
order to remove any bullet lube or lead residue. Then, you
had to start from square one to re-adjust the crimp. Those
days are over. All you have to do now is pop a clip and the
die insert drops into your hand for cleaning.
NOTE: All Dillon Pistol Die sets include our sizer/ decap die,
seat die and a separate crimp die. (Taper crimp for autos; accucrimp for revolvers.)
Dillon Pistol Dies (Three-Die Sets)
.32 S&W/.32 H&R Magnum
.380 ACP
9mm Parabellum
9x25 Dillon
.357 SIG
K07-14426
K07-14401
K07-14406
K07-14601
K07-22083
$63.95
63.95
63.95
132.95
132.95
Tighter
ACCUCRIMP
die
.38 Super
.38 Special/.357 Magnum
10mm/.40 S&W
.41 Magnum
.44 Special/.44 Magnum
.45 ACP/.45 GAP
.45 Colt
K07-14399
K07-14400
K07-14398
K07-14402
K07-14403
K07-14404
K07-14405
$63.95
63.95
63.95
63.95
63.95
63.95
63.95
.32 S&W/.32 H&R Magnum
.380 ACP
9mm Parabellum
9x25 Dillon
.357 SIG
.38 Super
.38 Special/.357 Magnum
10mm/.40 S&W
.41 Magnum
.44 Special/.44 Magnum
.45 ACP/.45 GAP
.45 Colt
K07-14119
K07-14410
K07-14415
K07-14602
K07-16513
K07-14408
K07-14409
K07-14407
K07-14411
K07-14412
K07-14413
K07-14414
$32.95
26.45
26.45
99.95
99.95
26.95
26.45
26.45
26.45
26.45
26.45
26.45
.32 S&W/.32 H&R Magnum
.380 ACP
9mm Parabellum
9x25 Dillon
.357 SIG
.38 Super
.38 Special/.357 Magnum
10mm/.40 S&W
.41 Magnum
.44 Special/.44 Magnum
.45 ACP/.45 GAP
.45 Colt
K07-14106
K07-14419
K07-14424
K07-14603
K07-16515
K07-14417
K07-14418
K07-14416
K07-14420
K07-14421
K07-14422
K07-14423
$25.95
24.95
24.95
27.95
27.95
24.95
24.95
24.95
24.95
24.95
24.95
24.95
.32 S&W/.32 H&R Magnum
.380 ACP
9mm Parabellum
9x25 Dillon
.357 SIG
.38 Super
.38 Special/.357 Magnum
10mm/.40 S&W
.41 Magnum
.44 Special/.44 Magnum
.45 ACP/.45 GAP
.45 Colt
K07-14107
K07-14438
K07-14443
K07-14604
K07-16514
K07-14436
K07-14437
K07-14435
K07-14439
K07-14440
K07-14441
K07-14442
$23.95
23.95
23.95
26.95
26.95
23.95
23.95
23.95
23.95
23.95
23.95
23.95
K07-21528
$5.75
Dillon Carbide Size/Deprime Dies
Dillon Seating Dies
Dillon Crimp Dies
Spare Decapping Pins
Package of 10
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Dillon’s Rifle Die Sets
Stuck Case
Remover
Carbide
Expander
Ball
Hex adjustments
for wrench
Size Die
Polished
to a High
Micro-Finish
Precise,
Uniform
Taper Crimp
35
Size Die
• Full-length, to minimum tolerance
• Carbide expander ball
• Features stuck case remover
Seat Die
• Designed to hold bullet straight
Standard
7/8 x 14
Threads
throughout the seating process
Taper Crimp Die
Solid,
1-Piece
Decapping
Pin
Radiused
Mouth
Dillon Three-Die Rifle Die Sets include a sizing/
depriming die, a bullet seating die and a taper crimp
die. Dillon Two-Die Rifle Die Sets include a
sizing/depriming die and a seat/crimp die.
Sizing/Depriming Die
The sizing/depriming die is full-length, to minimum tolerances, sizing cases down to function in
semi- and full-automatic firearms. We strongly suggest that a headspace case gage be used to correctly
adjust the size die.
For high volume users, such as commercial
reloaders, law enforcement agencies, and high
power or service rifle competitors, we also offer .223
and .308 die sets with a full-length carbide sizing
die. Lubrication is still required, but the increased
scratch resistance and die longevity of carbide are of
great benefit to these groups of users.
The depriming assembly includes a carbide
expander ball for “squeak-free,” effortless neck
expansion. This expander ball is located in the middle of the depriming stem to take advantage of superior initial leverage for easier extraction.
In the event of a stuck case, the design of the
depriming assembly allows it to function as a stuck
case remover.
Bullet Seating Die
Our bullet seating die is internally designed to keep
the bullet straight throughout the seating process.
Once properly adjusted, the only measurable runout
will be that which is inherent in the bullet.
Taper Crimp Die
The taper crimp die is also specially configured to
center both the case neck and the case body, thereby
aligning the entire cartridge for a more uniform
crimp. Dillon Rifle Dies are designed to meet the
more rigid requirements for both accuracy and precision demanded by today’s marksman.
A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms
with detachable box magazines, and in lever-action
firearms with tubular magazines.
• Centers case neck and body for
a more uniform crimp
Dillon Rifle Dies (Three-Die Sets)
.223 Remington
K07-10839
$66.95
.308 Winchester
K07-15574
66.95
.30-06 Springfield
K07-10840
66.95
Dillon Carbide Rifle Dies (Three-Die Sets)
.223 Remington
K07-10096
$152.95
.308 Winchester
K07-10793
158.95
Except where noted, die sets include three dies:
carbide size/decap, a seater and a separate crimp
die. PLEASE NOTE: Carbide rifle dies still require
case lubrication!
Dillon/Redding .30 M1 Carbine Three-Die Set
Incl: Dillon carbide size die, Redding seat & crimp dies.
.30 M1 Carbine Die Set
K07-20625
$103.95
Dillon Size Dies
.223 Remington
K07-12778
$39.95
.223 Remington (Carbide) K07-10223
121.95
.30 M1 Carbine (Carbide) K07-97039
72.95
.308 Winchester
K07-10242
39.95
.308 Winchester (Carbide) K07-10234
133.95
.30-06 Springfield
K07-12238
39.95
Universal Decapping Die
K07-22127
$26.95
Dillon Seat Dies
.223 Remington
K07-21672
$29.95
.308 Winchester
K07-21674
29.95
.30-06 Springfield
K07-21673
29.95
Dillon Taper Crimp Dies
.223 Remington
K07-21676
$27.55
.308 Winchester
K07-21678
27.55
.30-06 Springfield
K07-21677
28.55
Spare Decapping Pins
.223 Remington
K07-13278
$3.99
.308 Winchester
K07-13132
3.99
.30-06 Springfield
K07-13069
3.99
For Universal Decapping Die K07-15816
3.99
Spare Dillon Die Lock Rings (Fit all 7/8” x 14 thread dies)
Dillon Die Lock Rings
K07-14067
$1.10
5-Pack Die Lock Rings
K07-10669
4.15
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
36
Get your “stuff” together, then keep it that way!
Dillon Ammunition Boxes
Description
9mm (50 rd)
9mm (100 rd)
.38/.357 (50 rd)
.38/.357 (100 rd)
.44 (50 rd)
.44 (100 rd)
.45 ACP (50 rd)
.45 ACP (100 rd)
Small Rifle (50 rd)
Medium Rifle (20 rd)
Medium Rifle (50 rd)
Large Rifle (20 rd)
Large Rifle (50 rd)
Stock #
K07-13784
K07-13645
K07-13476
K07-13766
K07-13568
K07-13680
K07-13715
K07-13574
K07-13740
K07-13625
K07-13665
K07-13647
K07-13231
Each
$1.50
2.40
1.70
2.50
1.80
2.85
1.70
2.65
2.30
1.85
2.85
1.85
3.10
10 ea.
$11.90
16.20
12.50
16.70
13.90
21.00
12.90
19.80
16.50
14.20
21.00
13.90
23.00
Case(Qty.)
$51.50(50)
69.50(50)
55.50(50)
73.50(50)
58.50(50)
91.50(50)
56.50(50)
89.50(50)
71.50(50)
105.60(80)
91.50(50)
62.50(50)
103.50(50)
NOTE: “.38” series cases fit .38 Super, .32-20, .30 Carbine and .30 Mauser; “9mm” series cases fit .30 Luger, 9 x 21 and .380; “.44” series cases fit .41 Mag, .44-40 and .45
Colt; and “.45” series cases fit 10 mm and .40 S&W. “Small rifle” cases fit .222, .223 to
7.62 x 39 length; 20 round “medium rifle” cases fit 7.62 x 39, .22-250 to .30-06
length; 50 round “medium rifle” cases fit .22-250, .308 to .30-30 length; and “large
rifle” cases fit .30-06, 8 x 57 length to all belted cartridges.
Extra Loading Data Labels, K07-10446, Package of 100, $6.95
A
D
Dillon Utility Boxes
Try a few of Dillon’s heavy-duty, lightweight plastic
ammo boxes. If you’re like us, you’re tired of crumbling
styrofoam and cardboard boxes held together with layers
of tape. These boxes are perfect for range or field use.
Designed to keep out dirt, dust and rain.
Dillon AkroBins
kroBins are perfect for reloaders who load several calibers, bullet weights, bullet shapes, etc. We’ve been including these bins
with our machines for years, and now we’re stocking them in quantity for our customers.
• The small bins (the ones we use as Square Deal “B” cartridge
bins) are 4-3/4" long x 3-7/16" wide x 2-13/16" deep.
• The RL 550B/XL650 cartridge bins are 6-3/4" long x 3-7/16"
wide x 2-13/16" deep.
• The 1050 bins are 10-1/4" long x 4-3/8" wide x 4-3/4" deep.
• The double-extra-large bins we use on our SL 900 measure 133/4" long x 6-1/2" wide x 6-3/4" deep (all inside dimensions).
AkroBins are made of heavy-duty polypropylene with permanent, molded-in color (ours are blue). They’re virtually unbreakable; unaffected by weak acids and alkalis, and are also water, rust
and corrosion proof. Hang ’em, stack ’em, rack ’em and fill ’em –
you just can’t beat ’em! Buy several and get your “stuff” together.
Description
Stock #
Each
6 ea.
12 ea.
“Square Deal” Bin
K07-13756
$2.95
$15.30
$24.84
“RL 550/XL 650” Bin
K07-13839
2.95
15.30
24.84
“RL 1050” Bin
K07-13484
6.95
34.92
61.92
“SL 900” Bin
K07-17125
10.50
56.94
106.92
illon’s Utility boxes are ideal for all those accessories that
don’t quite fit into the compartments of your shooting bag.
The large box measures 13-1/2" x 5-3/4" x 2-1/4" and the small
box measures 4-5/8" x 6-3/8" x 1-5/8". Use them for cleaning gear,
extra magazines, repair parts, first aid supplies, reloading accessories and tools – the list is endless.
Description
Stock #
Each
5 ea.
Small Utility Box
K07-13636
$2.65
$10.95
Large Utility Box
K07-17195
5.75
23.95
Berry’s Manufacturing Ammo/Storage Boxes
Description
Stock #
Each
10 ea.
50 ea.
.500 S&W (50 rd)
K07-19243
$2.98
$22.40
$97.00
Note: .500 S&W Ammo Boxes also fit .223/.243/.308 WSSM Cartridges
.454 Casull (50 rd)
K07-19244
2.98
22.40
97.00
.45/70 (50 rd)
K07-19245
3.29
24.20
105.00
7.62 x 54R (50 rd)
K07-19247
3.50
25.50
110.50
.300 Ultra (50 rd)
K07-19246
3.50
25.50
110.50
20 Ga. (25 rd)
K07-19248
2.24
16.80
72.50
12 Ga. (25 rd)
K07-19249
2.24
16.80
72.50
Storage Boxes
4-3/8”x 2”x 1-5/8”
K07-19250
$1.12
$8.40
$36.50
4-1/2”x 4-1/2”x 1-5/8” K07-19251
2.32
17.40
75.50
5-1/2”x 2-5/8”x 2-1/2” K07-19252
2.22
16.70
72.00
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
37
‘Belted Magnum’ Powder System
M
agnum rifle cartridges can require from 70
grains to well in excess of 100 grains for a
single charge. Our “Belted Magnum” Powder
System features a maximum-capacity steel powder bar that can dispense more than 100 grains
of extruded IMR powder.
Like all of Dillon’s powder measures, the
Belted Magnum Powder System is case-activated
and can be used with your RL 550B, XL 650 or
AT 500 reloader. It’s ideal for loading largecaliber magnum rifle cartridges. We tested this
system with various extruded rifle powders and
found that powder charge variations stayed
within plus-or-minus three-tenths of a grain.
The “Belted Magnum” Powder System is
based on our SL 900 Shot Dispenser, so the Maximum Charge Bar won’t work in our standard
powder measures – you’ll need to buy the entire
system. The good news is that the “Belted Magnum” Powder System has an integral drain, so it’s
easy to empty the hopper in order to change
powder types; so, if you load several big calibers
with various powders, it’s easy to switch from
one to another.
Keep plenty of extra powder on hand, because when you’re dispensing 100-plus grains
into every cartridge, you’re gonna need it!
Magnum Powder System K07-97126 $132.95
PROTEKTOR
MODEL
The Original Leather Sandbag* Rifle Rests
A.
A
ll Protektor Model leather bags are
made with the best top grain
cowhide available. The welded steel
rest is strong enough to stand on and
won’t break if dropped (Owl Ear Front
Bag sold separately).
A. Front Bag
K07-10880
$19.95
B. Rifle Rest
K07-10883
49.95
C. Std. Front Bag K07-10881
22.95
D. Rear Bag
K07-10882
26.95
*Sand not included.
B.
C.
D.
L. E. Wilson Case Gages, Deburring Tool
Evolution Gun Works
Chamber Checkers
S
peed up the roundchecking process
when you’re getting
ready for a match! EGW uses
actual Clymer chamber reamers
to produce its chamber checkers.
Pistol Chamber Checker
9mm
K07-19846 $19.95
.38 Super K07-19847 19.95
.40 S&W K07-19848 19.95
.45 ACP K07-19849 19.95
Cowboy Chamber Checker
(.357 Mag.,.44 Mag., .44-40,
.45 Colt) K07-25375 19.95
AR-15/M-16 Chamber Checker
.223 Rem K07-25377 29.95
5.56x45 K07-25376 29.95
Shotgun Chamber Checker
12 Ga. K07-19523 49.99
20 Ga. K07-19524 49.99
.22-250
.243
.25-06
.270
6.8 SPC
.30 Carbine (Case Length Only)
.30-30
7.62 x 39
7mm Mag.
.300 AAC Blackout
.300 Win. Mag.
.300 WSM
.357 SIG
.38-40 Winchester
.44-40 Winchester
.50 Browning MG
Deburring Tool
K07-12718
K07-12828
K07-11760
K07-11828
K07-19522
K07-18784
K07-12924
K07-14901
K07-12336
K07-19515
K07-11752
K07-18709
K07-18708
K07-10682
K07-10697
K07-14447
K07-16038
$36.00
36.00
36.00
36.00
36.00
36.00
36.00
36.00
46.00
36.00
46.00
36.00
36.00
36.00
36.00
60.00
$20.00
Attain Peak Accuracy With Hornady’s L-N-L O.A.L. Gauge, Bullet Comparator
Overall Length Gauge
The initial distance a bullet must travel
when fired (from the cartridge case mouth
until it engages the rifling) is absolutely
critical to achieving peak accuracy. A free
run of .010 to .060 is commonly employed
for accurate target, varmint and hunting
loads. Consequently, knowing and being
able to alter the dimensions, as needed, is
vitally important to precision shooters and
handloaders.
OAL Gauge
K07-14622 $32.95
OAL Gauge, Curved K07-14862
36.95
(Use for auto, lever and pump rifles)
Modified Case (required)
.223 Rem.
K07-14627
$6.99
.22-250
K07-14628
6.99
.243 Win.
K07-14631
6.99
.270 Win.
K07-14641
6.99
7mm Rem. Mag.
K07-14648
6.99
.308 Win.
K07-14652
6.99
.30-06
K07-14653
6.99
.300 Win. Mag.
K07-14655
6.99
Bullet Comparator
Correct bullet seating depth is critical
to accuracy. In addition, minor variations
in bullet seating depth will have an effect
on both pressure and velocity. The L-N-L
Bullet Comparator provides precision
handloading dimensions.
(Caliper not included)
Bullet Comparator
K07-14670
Comparator Insert (required)
.22 caliber
K07-14672
.24 caliber
K07-14673
.25 caliber
K07-14674
.26 caliber
K07-14675
.27 caliber
K07-14676
.28 caliber
K07-14677
.30 caliber
K07-14678
.33 caliber
K07-14679
.35 caliber
K07-14680
.37 caliber
K07-14681
.45 caliber
K07-14682
$12.35
$8.95
8.95
8.95
8.95
8.95
8.95
8.95
8.95
8.95
8.95
8.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
SL
900
Dillon’s
Revolutionary
Shotshell
Loader
STANDARD FEATURES:
• Automatic Indexing
• Auto Powder/Priming Systems
• Adj. Case-Activated Shot System
• Factory Adjusted to Load AA Hulls
• Factory Adjusted Loading Dies
• The Original Tilt-Out Wad Guide
• Lifetime “No-B.S.” Warranty
All for ONLY...
$
864
95
$1094.90 with Casefeeder
12 Gauge K07-97110
20 Gauge K07-97123
28 Gauge K07-97124
Comes with factory adjusted dies.
Total price as pictured here with
optional accessories: $1181.80
12 Gauge Casefeeder (pictured)
K07-97037
20/28 Gauge Casefeeder
K07-97036
12 Ga. Euro. 220v Casefeeder
K07-97118
20/28 Ga. Euro. 220v Casefeeder
K07-97125
Aluminum Roller Handle
K07-17950
Low Powder Sensor
K07-16306
$229.95
$229.95
$239.95
$239.95
$44.95
$41.95
39
SL 900 Accessories
E. SPARE PARTS KIT
A. SL 900 CONVERSIONS
12 Gauge Conversion
K07-20009, $336.95
20 Gauge Conversion
K07-22138, $336.95
28 Gauge Conversion
K07-22139, $336.95
20/28 Gauge Casefeed Plate
(not pictured)
K07-97045, $42.95
SL 900 Powder System
K07-17817, $76.95
B. PACKAGE DEAL
Includes: Lyman Reloading
Handbook, Clear Safety
Glasses, Dial Caliper, Eliminator Scale, Machine Cover,
and Low Powder Sensor.
K07-22290, $199.95
1 20 Gauge Yellow Wad Guide
1 28 Gauge Green Wad Guide
1 20 Gauge Locator Pin
1 Index Pawl
1 Ring Indexer
1 Index Spring Revision A
1 Hair Pin Cotter
2 Bellcrank Cubes
1 Case Insert Slide Spring
1 Pawl Spring
1 Ejector Wire
1 Plastic Wad Guide
1 Swing Arm Torsion Spring
1 Primer Transfer Arm
1 12 Gauge Locator Pin
1 Gum Rubber Insert Revision B
1 Shot Fitting E-Clip
1 Failsafe Bushing Revision B
K07-11154, $26.95
F. WINCHESTER
SHOTSHELL
WADS
C. SL 900 MACHINE COVER
This heavy-duty nylon cover
comes equipped with a D-ring,
allowing the zipper to be locked.
K07-13239, $39.95
(D.) Master lock
K07-13083, $3.95
C.
D.
WT12, 12ga, Orange
WAA12, 12ga, White
WAA12SL, 12ga, Pink
WAA20, 20ga, White
WAA28, 28ga, Red
WAA41, .410, Red
1-1 5/8
1-1 5/8
1-1 1/8
7/8-1 1/4
Most
Most
500
250
250
250
250
250
K07-15515$11.95
K07-15516 8.95
K07-15517 8.95
K07-15518 8.95
K07-15519 8.95
K07-15520 8.95
Dillon Reloader Toolholders
D
illon’s Toolholders are available for your RL 550B,
XL 650, SL 900, and Square Deal B, and ensure that
the tools you need to service your reloader are handy
and organized. No more digging around your bench trying to find the right size hex wrench!
XL 650/SL 900 with Wrench Set
XL 650/SL 900 w/o Wrench Set
RL 550 with Wrench Set
RL 550 w/o Wrench Set
Casefeed 550, with Wrench Set
Casefeed 550, w/o Wrench Set
Square Deal B with Wrench Set
Dipped Ball-End Hex Wrenches
One-Inch Bench Wrench
Square-Deal-Only Wrench
K07-11555
K07-11554
K07-11541
K07-11543
K07-11540
K07-11542
K07-19441
K07-11483
K07-10842
K07-19970
$29.95
18.95
28.95
17.95
28.95
17.95
26.95
17.95
7.95
8.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Katie Weilage:
By Mark Pixler
The morning I was to meet Katie Weilage, I
received a call from Chris Dillon at Dillon Aero,
our sister company. Katie was in town for a class
at Dillon Aero and we were doing a photo shoot
while she was here. Chris asked me to do an article about Katie in The Blue Press and wanted the
title to be something like, “Beauty and the Beast.”
Really? I thought. At the
time, I figured “the Beast” part
of the title was referring to the
Dillon Aero M134D Gatling
Gun. I was wrong. Wrong
because – unlike Chris – I had
yet to find out what Katie does
for a living.
Turns out “the Beast” Chris
was referring to was the Mi-17
helicopter, the former Soviet
workhorse for which Katie has
served as a flight instructor,
maintenance instructor, A&P
mechanic, and flight engineer!
You see, she instructs the
Afghan military/police, nonrated aircrew members on the
Mi-8/17. She has also instructed Mi-8/17 systems classes to
the Afghan military/police in a
classroom setting.
Essentially, Katie trains Afghans to be crew
chiefs on the Mi-17; but how in the world does a
young lady from Southwest Iowa end up in
Afghanistan as a civilian “contractor?”
It started one summer when her mother took
her to the Strategic Air Command Museum at
Offutt Air Force Base in Bellevue, Nebraska. “I
was bitten by the aviation bug,” Katie said, “I
wanted to be an astronaut when I grew up.” So,
she did all she could to make that dream come
true, including ROTC, but a motorcycle accident
before she was to be commissioned led to a medical board declining her as a candidate because of
a “delayed union” of a fracture she had suffered.
The “bug bite” wouldn’t go away, however, so
she pursued other means to the desired end. Katie
earned an associates degree in
aviation maintenance, then a
batchelor of science in professional aeronautics with a double minor in aviation safety and
business administration, and
went to work in the civilian aviation field.
From an initial job refueling
aircraft at a Council Bluffs,
Iowa, municipal airport, Katie
relocated to Alamogordo, New
Mexico, which led to a posiKatie in the
gunner’s seat of tion at the Aero Club on Holloman Air Force Base, where she
Dillon Aero’s
UH-1H Huey was introduced to the “conduring her visit. tracting world.”
Background
“I happened to be at the right
photo: Getting place at the right time,” Katie
in a little liveexplained. “Out of the blue, the
fire with the
program director of the Mi-17
M134D.
contract in El Paso, Texas, contacted me and said, ‘We’re hiring, and would like
you to interview for a position.’ I’d never worked
on a helicopter in my life,” she continued, “all my
experience was in general aviation fixed wing!”
Katie said a “crusty” retired first sergeant gave
her the chance of a lifetime when he asked her,
“Why do you want to work on helicopters?” Her
answer must have struck him as being genuine
: The Girl Next Doorgunner
when she said, “I don’t know anything about helicopters, but I REALLY want this job, and I’m
willing to learn.”
She walked out of the interview not knowing if
she would get the job or not. Then she received a
call from the company asking, “Why aren’t you
working with us? You were supposed to start two
weeks ago!” It turned out that the letter containing the company’s offer had been misplaced on a
secretary’s desk. Fortunately, the mistake was rectified and Katie got the job.
So, “the girl next door” becomes “the girl next
doorgunner.” Prior to serving as a contractor,
Katie had no “gunner”
experience. Now, she
trains crew chief/gunners
for a living, having
learned the “gunner” part
on the job in Afghanistan.
Katie on the
The “crew chief” part she
job in
learned working in El
Afghanistan
Paso, which led to oppor…in the belly
tunities traveling stateside of “the beast.”
and exotic locales overseas (Ukraine and another ‘Stan country).
All her training and experience has served
Katie well, making her possibly the most experienced woman in the Russian-helicopter world of
Mi-8s, Mi-17s as well as Mi-24/35s. A selfdescribed “far from prissy girl,” Katie is undaunted by being the only woman in “a man’s world. “
“I grew up racing go karts, shooting a bow and
arrow, and was the only girl in A&P school,” she
explains. “But, going to Afghanistan was an eyeopener. I get stared at a lot by the local nationals.” Most of the local nationals, serving their
country, are not used to a female “crew chief”
(being the ONLY female aircrew member).
Needless to say, Katie knows she’s in a hostile
environment when she’s on duty. “I carry my
Glock 19 every day,” she explains, “My M4 is kept
in a secure location until I fly, or unless I want it.
They’re my best friends while I’m overseas. I love
the M4 full-auto model.”
Katie’s small arms training came courtesy of
prior-Army friends, a military qualification course,
and ongoing company qualification annually. On
the job, her weapons training included courses in
how to use and maintain the Russian PKM heavy
machine gun, AK-47s, and on particular flights,
the Dillon Aero M134D Gatling gun.
“We (contractors) are
trained by fellow coworkers who completed
the Dillon Aero School.”
Katie said. “We learn the
disassembly for cleaning
and inspecting the
weapon system. Then we
have hands-on training
for the installation and
preflight on the helicopters. Once all previous tasks are completed, we
go to the range for qualifications.”
Just so you don’t get the impression that Katie’s
work involves training Afghans as crew chiefs on
Mi-17 helicopters for sightseeing ventures, I need
to tell you that her group’s mission is classified,
but is likely to result in contact with well-armed
and highly motivated opposition.
I admire Katie. I found her to be delightful to
work with and talk to, and once I found out that
we’re from the same area in Southwest Iowa…
well, we’re neighbors! So, I’m sorry, Chris, I
couldn’t use the title, “Beauty and the Beast.” It
D
just had to be, “The Girl Next Doorgunner.”
P
42
COMPETITIVE EDGE DYNAMICS
CED M2 Chronograph
CED7000 Timer
K07-17926 $199.00
K07-19208 $119.95
M2 Chronograph Accessories
Infrared Chronograph Upgrade Kit
Rechargeable Batt. Pack for Above
Nylon Carrying Case
Tripod
2-Ft. Skyscreen Mounting Bracket
Replacement Skyscreens
Replacement M2 Sensor
K07-12116
K07-12117
K07-18145
K07-18126
K07-18120
K07-18124
K07-18877
$89.00
48.00
35.95
39.95
14.95
21.95
36.95
T
he M2 Chronograph comes with sensors, screens and
one two-foot mounting bracket. A nylon carrying case
and tripod are available options. The CED7000 Shot
Timer is a breakthrough in technology. No other timer to
date offers this combination of advanced features, compact size and light weight. This is the “next generation”
Shot Timer here today! Comes with a rechargeable battery
with low-battery LCD indicator and a universal charger.
A
T
ake out your frustrations, and build
your grip strength at the same time!
Just think about…oh, the new Supreme
Court, socialized medicine, tax increases, high-capacity magazine bans, etc.,
and use the one-pound ball. Or, think
about the “bailout” legislation and the
luxury resort vacation the execs at AIG
enjoyed on YOUR DIME. You’ll need
the two-pound ball for THAT one!
1 lb. K07-15532 $7.99
2 lb. K07-15533 $14.95
Note: These Come in Assorted Colors
DCO SUPER THUMB® offers models
for popular centerfire pistols and 10/22
style magazines.
ST1 is for 9mm and .40 caliber Beretta,
Browning, Ruger, SIGARMS, S&W, etc. In
addition, the ST1 has interior rails and
grooves to accommodate Colt Government
magazines.
K07-18607 $7.95
ST2 is for Glock and Para-Ordnance magazines.
K07-18608
7.95
ST3 handles virtually all centerfire, singlecolumn magazines.
K07-18609
7.95
ST22 is for Ruger 10/22 rifles.
K07-18610
7.95
STJR is for Ruger, Browning, Colt and High
Standard .22 pistols.
K07-18611
7.95
STSW is for S&W and Walther® GSP .22
pistols.
K07-18612
7.95
B
uffer Technologies’ Recoil Buffer™ reduces felt recoil and increases muzzle
control. Easy installation.
Beretta 92
K07-18539
$24.95
(Includes buffer and guide rod.)
Browning HP
K07-18540
9.95
CETME
K07-18541
19.95
CZ 75
K07-18542
9.95
FN FAL
K07-18543
14.95
Glock (pictured)
K07-18545
9.95
HK 91
K07-18544
19.95
Ruger 10/22
K07-10526
9.95
Ruger Mini-14
K07-10525
14.95
SIG 220/226
K07-19123
24.95
S&W Model 41
K07-18486
9.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
BEAR & SON CUTLERY, MADE IN USA!
43
NEW!
M
y First Pocket Knife features Genuine India Stag
Bone™ scales and a 3” non-sharpened blade. This
ideal “first knife” for youngsters comes packaged in a gift
tin with a certificate for free sharpening when the time
comes that the owner is ready for a sharp knife.
“My First Pocket Knife”
K07-19525
$56.99
TAC II Drop Point
K07-19526
94.99
B
ear & Son’s Model
795 DP TAC II Drop Point
tactical knife features a high carbon stainless
steel, hollow ground blade with a locking sheath
designed by Blackie Collins. 11” overall length.
Bore-tips™ Bore Cleaning Foam Swabs
N
o s#!+, there I was…in my office,
cleaning my 686 SSR when the boss
walks in with that “whisky-tango-foxtrot”
look on his face. “Hi,” I said (thinking
fast), “I’m trying out these Bore-tips
before I write the Blue Press copy for
them. They work GREAT!”
The Bore-tips Swabs REALLY DO
work. What you can’t see under the foam
is a plastic jag sized for a tight bore fit
NEW!
which provides for the uniform application of solvents and oils. They work with
all standard 8-32 thread cleaning rods,
and are tough and reuseable.
.22/5.56mm (6 ea.) K07-15310 $4.98
.243/6mm (6 ea.)
K07-15311
4.98
.30/7.62mm (6 ea.) K07-15312
4.98
.357/9mm (6 ea.)
K07-15313
4.98
.40/10mm (5 ea.)
K07-15314
4.98
.45 Caliber (5 ea.)
K07-15315
4.98
A-ZOOM Ammo Premium Metal Snap-Caps
H
ard-anodized, solid aluminum snap caps with a
secret “Dead Cap” insert that
protects your firing pin and
outlasts brass by 20 times.
Quite simply the best snap
caps we’ve ever seen.
.32 Auto
.380 Auto
9mm Luger
.357 SIG
.40 S&W
.45 ACP
.38 Special
.357 Magnum
.44 Magnum
5 pack
5 pack
5 pack
5 pack
5 pack
5 pack
6 pack
6 pack
6 pack
K07-10923
K07-10795
K07-10798
K07-10794
K07-10796
K07-10797
K07-10801
K07-10800
K07-10802
$16.65
16.65
16.65
16.65
16.65
16.65
19.98
19.98
19.98
.44-40 Winchester
.45 Colt
.223 Remington
.22-250
.243 Winchester
.270 Winchester
.30 M1 Carbine
.30-30 Winchester
.303 British
.308 Winchester
.30-06 Springfield
.45-70 Government
6.5x55 Swedish
7.62x39 Russian
12 Gauge
20 Gauge
28 Gauge
.410 Gauge
6 pack
6 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
2 pack
K07-10803
K07-10804
K07-10810
K07-10809
K07-10811
K07-10812
K07-10813
K07-10815
K07-10816
K07-10817
K07-10814
K07-10818
K07-10819
K07-10820
K07-10805
K07-10806
K07-10807
K07-10808
Dillon 1911 Bushing Wrench
Saf-T-Trainer
Molded Plastic
Dummy/
Training
Ammo
Sold in packages of five:
.22 LR
K07-10086 $4.95
9mm
K07-10087
4.95
.38/.357
K07-10088
4.95
.40 S&W K07-10060
4.95
.44 Mag. K07-10061
4.95
.45 Colt
K07-10061
4.95
19.98
19.98
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
9.99
.45 ACP
.223
7.62x39
.308
.30-06
20 Ga.
12 Ga.
K07-10062
K07-10063
K07-10064
K07-10065
K07-10066
K07-10067
K07-10068
4.95
4.95
4.95
4.95
4.95
7.95
7.95
K07-11049
$2.50
44
Remington Bulk Brass
(Call for Availability)
Sold in packages of 100 – (U) Unprimed (P) Primed
Description
Stock # 1-4/ea.
5-9/ea.
.380 Auto (U)
K07-34032 $24.00
$22.50
9mm (U)
35.20
33.00
K07-34091
9mm (P)
K07-34052
40.00
37.50
.38 Super (U)
K07-34096
35.20
33.00
.38 Super Nickel (U)
K07-34055
40.00
37.50
.38 Special (U)
K07-34071
32.00
30.00
.357 Magnum (U)
K07-34095
36.80
34.50
K07-34061
48.00
45.00
.357 Magnum (P)
K07-34029
48.00
45.00
.41 Magnum (U)
.44 Special (U)
K07-34065
48.00
45.00
K07-34080
51.20
48.00
.44 Magnum (U)
K07-34056
56.00
52.50
.44 Magnum (P)
.45 ACP (U)
K07-34087
48.00
45.00
K07-34099
51.20
48.00
.45 ACP (P)
.45 Colt (U)
K07-33771
44.80
42.00
K07-33814
51.20
48.00
.45 Colt (P)
.22-250 (U)
K07-34043
72.00
67.50
56.00
52.50
.223 Remington (U)
K07-34070
K07-34081
72.00
67.50
.223 Remington (P)
80.00
.243 Winchester (U)
K07-34021
75.00
96.00
.25-06 (U)
K07-34030
90.00
72.00
.270 Winchester (U)
K07-33974
67.50
7mm Remington Mag. (U) K07-33980
96.00
90.00
K07-36924
48.00
45.00
.30 Carbine (U)
K07-34000
56.00
52.50
.30-30 Winchester (U)
72.00
.308 Winchester (U)
K07-34035
67.50
.30-06 (U)
K07-33991
80.00
75.00
.300 Winchester Mag. (U) K07-33866
96.00
90.00
.44-40 Winchester (U)
K07-34083
51.20
48.00
Remington Bulk Bullets
10+/ea.
$20.25
29.70
33.75
29.70
33.75
27.00
31.05
40.50
40.50
40.50
43.20
47.25
40.50
43.20
37.80
43.20
60.75
47.25
60.75
67.50
81.00
60.75
81.00
40.50
47.25
60.75
67.50
81.00
43.20
(Call for Availability)
Sold in packages of 100
.308 Caliber (7.62mm) Bullets
Description
Stock # 1-4/ea.
110 gr. SP
K07-33867 $28.80
110 gr. MC
K07-34059
32.00
150 gr. SPCL
K07-30279
51.20
170 gr. SPCL
K07-33501
40.00
150 gr. PSPCL
K07-33884
40.00
180 gr. PSPCL
K07-30467
40.00
9 Millimeter Bullets
Description
Stock # 1-4/ea.
115 gr. MC
K07-34788
24.00
115 gr. JHP
K07-34101
24.00
124 gr. MC
K07-34064
24.00
.357 Caliber Bullets
Description
Stock # 1-4/ea.
125 gr. SJHP
K07-34789
24.00
158 gr. SJHP
K07-34790
28.80
.40 Caliber Bullets
Description
Stock # 1-4/ea.
180 gr. JHP
K07-34791
40.00
.41 Caliber Bullets
Description
Stock # 1-4/ea.
200 gr. JHP
K07-34005
40.00
210 gr. SP
K07-34069
48.00
.44-40 WCF Bullets (Note: Sized to .425 diameter)
Description
Stock # 1-4/ea.
200 gr. JSP
K07-33439
48.00
.44 Caliber Bullets
Description
Stock # 1-4/ea.
180 gr. SJHP
K07-34063
38.40
240 gr. SJHP
K07-34053
40.00
.45 Caliber Bullets
Description
Stock # 1-4/ea.
230 gr. MC
K07-34821
48.00
5-9/ea.
$27.00
30.00
48.00
37.50
37.50
37.50
10+/ea.
$24.30
27.00
43.20
33.75
33.75
33.75
5-9/ea.
22.50
22.50
22.50
10+/ea.
20.25
20.25
20.25
5-9/ea.
22.50
27.00
10+/ea.
20.25
24.30
5-9/ea.
37.50
10+/ea.
33.75
5-9/ea.
37.50
45.00
10+/ea.
33.75
40.50
5-9/ea.
45.00
10+/ea.
40.50
5-9/ea.
36.00
37.50
10+/ea.
32.40
33.75
5-9/ea.
45.00
10+/ea.
40.50
Once-Fired Cartridge Cases
9mm cases
.40 S&W cases
1000/box
1000/box
K07-19203
K07-19204
$44.00
52.00
(Call for Availability)
Winchester Bulk Brass
Sold in packages of 100 – (U) Unprimed (P) Primed
Stock # 1-4/ea.
Description
9mm (U)
K07-34075 $28.80
.38 Super (U)
K07-34079
32.00
K07-34077
28.80
.38 Special (U)
.357 Magnum (U)
K07-34068
32.00
.40 S&W (U)
K07-34085
44.80
10mm (U)
K07-34097
48.00
K07-30720
80.00
.38-40 Winchester (U)
.44-40 Winchester (U)
K07-36919
51.20
.44 Magnum (U)
K07-34073
48.00
K07-34058
40.00
.45 ACP (U)
K07-36920
51.20
.45 Colt (U)
.223 Remington (U)
K07-34078
40.00
.45-70 (U)
K07-36921
99.20
Sold in packages of 100 – (U) Unprimed (P) Primed
Description
Stock #
1Pkg.
.204 Ruger (U)
K07-31722
27.79
.223 WSSM (U)
K07-31724
63.29
K07-31725
63.29
.243 WSSM (U)
.270 WSM (U)
K07-31726
66.91
.300 WSM (U)
K07-31723
68.28
K07-32539
44.00
7.62 x 39 (U)
.325 WSM (U)
K07-31727
68.44
5-9/ea.
$27.00
30.00
27.00
30.00
42.00
45.00
75.00
48.00
45.00
37.50
48.00
37.50
93.00
10+/ea.
$24.30
27.00
24.30
27.00
37.80
40.50
67.50
43.20
40.50
33.75
43.20
33.75
83.70
5 Pkg.
130.20
296.70
296.70
313.60
320.10
206.30
320.80
10 Pkg.
234.40
534.00
534.00
564.50
576.10
371.00
577.50
1-4/ea.
$17.60
19.20
5-9/ea.
$16.50
18.00
10+/ea.
$14.85
16.20
1-4/ea.
35.20
5-9/ea.
33.00
10+/ea.
29.70
1-4/ea.
19.20
24.00
32.00
5-9/ea.
18.00
22.50
30.00
10+/ea.
16.20
20.25
27.00
1-4/ea.
25.60
5-9/ea.
24.00
10+/ea.
21.60
1-4/ea.
24.00
24.00
30.40
5-9/ea.
22.50
22.50
28.50
10+/ea.
20.25
20.25
25.65
1-4/ea.
32.00
5-9/ea.
30.00
10+/ea.
27.00
1-4/ea.
48.00
5-9/ea.
45.00
10+/ea.
40.50
1-4/ea.
32.00
48.00
5-9/ea.
30.00
45.00
10+/ea.
27.00
40.50
Winchester Bulk Bullets
Sold in packages of 100
.223 Caliber Bullets
Description
Stock #
55 gr. FMJBT
K07-34105
55 gr. PSP
K07-34098
.308 Caliber (7.62mm) Bullets
Description
Stock #
147 gr. FMJBT
K07-34100
9mm Bullets
Description
Stock #
115 gr. FMJRN
K07-34103
115 gr. JHP
K07-34102
147 gr. JHP
K07-34086
.38 Super Bullets
Description
Stock #
130 gr. MC
K07-34074
.357 Caliber Bullets
Description
Stock #
110 gr. JHP
K07-34076
125 gr. JHP
K07-34066
158 gr. JHP
K07-34045
10mm/.40 Caliber Bullets
Description
Stock #
180 gr. JHP
K07-34090
.429 Caliber Bullets
Description
Stock #
240 gr. HSP
K07-34072
.45 Caliber Bullets
Description
Stock #
230 gr. FMJ
K07-34054
230 gr. JHP
K07-34093
(Call for Availability)
Starline Brass
Unprimed brass sold in packages of 100 (This is not LOADED ammunition.)
Description
Stock #
1Pkg.
5 Pkg.
10 Pkg.
.32 H&R Magnum
K07-30258 $17.28
$78.00
$140.10
.32-20 Winchester
K07-31282
22.96
103.60
186.20
.38 Short Colt
K07-39919
17.99
81.15
145.90
.38 Super Comp
K07-30257
17.80
78.60
144.30
.357 SIG
K07-30528
20.15
90.90
163.40
.40 S&W
K07-31283
18.45
83.20
149.60
10 mm
K07-31281
19.27
85.20
156.30
.45 ACP
K07-31284
19.58
88.30
158.80
.45 Colt
K07-30259
21.90
98.80
177.60
.500 S&W Magnum
K07-38596
55.80
251.80
452.50
NOTICE: There is a $20.00 minimum ‘Hazardous Material’ (HazMat) handling fee for shipping PRIMERS. This fee is
assessed in increments of 10,000 primers. Primer orders MUST be shipped separate from other items, and require a
separate shipping and handling charge. Shipping and HazMat fees are not included in prices.
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Discontinued
Brands
Hard-Cast Lead Bullets (while supplies last)
Hard-Cast Lead Bullets, 500/Pk.
.32 RN 78 gr.
.32 RNFP 96 gr.
.32-20 RNFP 115 gr.
.380 RN 95 gr.
9mm RN 125 gr.
9mm FP 125 gr.
9mm RN 135 gr.
9mm FP 147 gr.
.38 ACP RN 125 gr.
.38 ACP FP 125 gr.
.38 ACP RN 135 gr.
.38 ACP FP 147 gr.
.38/.357 RNFP 95 gr.
.38/.357 FP 125 gr.
.38/.357 RNFP 128 gr.
.38/.357 RNFP 130 gr.
.38/.357 WC 148 gr.
.38/.357 RNFP 152 gr.
.38/.357 RN 158 gr.
.38/.357 RNFP 158 gr.
.38/.357 SWC 158 gr.
.40/10mm RNSWC 155 gr.
.40/10mm SWC 175 gr.
.40/10mm FP 180 gr.
.40/10mm FP 200 gr.
.40/10mm FP 220 gr.
.38/40 RNFP 180 gr.
.41 SWC 215 gr.
.44/40 RNFP 200 gr.
.44 FP 180 gr.
.44 RNFP 200 gr.
.44 RNFP 240 gr.
.44 SWC 240 gr.
.45 SWC 160 gr.
.45 RNFP 160 gr.
.45 SWC 185 gr.
.45 SWC 200 gr.
.45 RNSWC 200 gr.
.45 RNFP 200 gr.
.45 FP 225 gr.
.45 RN 230 gr.
.45 RNFP 250 gr.
.45 SWC 255 gr.
.45/70 RNFP(Single Shot) 405 gr.
.45/70 RNFP(Lever Action) 405 gr.
Stock #
K07-18660
K07-11422
K07-18661
K07-18662
K07-18663
K07-18664
K07-18665
K07-18666
K07-18667
K07-18668
K07-18669
K07-18670
K07-18671
K07-18672
K07-18673
K07-18674
K07-18675
K07-11421
K07-18676
K07-18677
K07-18678
K07-18679
K07-18680
K07-18681
K07-18682
K07-18683
K07-18684
K07-18685
K07-18686
K07-18687
K07-18688
K07-18689
K07-18690
K07-18691
K07-18692
K07-18693
K07-18694
K07-18695
K07-18696
K07-18697
K07-18698
K07-18699
K07-18700
K07-18702
K07-18703
500
28.00
33.00
32.00
31.00
31.00
39.00
32.00
34.00
34.00
37.00
32.00
34.00
29.00
31.00
40.00
32.00
44.00
39.00
46.00
44.00
40.00
39.00
43.00
43.00
49.00
61.00
48.00
57.00
56.00
39.00
56.00
43.00
50.00
42.00
42.00
45.00
49.00
44.00
56.00
53.00
48.00
58.00
68.00
54.00
54.00
SNS Casting Hard-Cast Lead Bullets 45
Hard-Cast Lead Bullets, 500/Pk.
.380 RN 95 gr.
9mm RN 125 gr.
9mm FP 125 gr.
9mm RNFP 147 gr.
.38/.357 RN 95 gr.
.38/.357 RNFP 100 gr.
.38/.357 FP 105 gr.
.38/.357 RN 115 gr.
.38/.357 RN 125 gr.
.38/.357 DEWC 148 gr.
.38/.357 SWC 158 gr.
.38/.357 RN 158 gr.
.38/.357 RNFP 158 gr.
.38/.357 RN 160 gr.
.40/10mm FP 140 gr.
.40/10mm SWC 175 gr.
.40/10mm FP 180 gr.
.40/10mm RN 200 gr.
.44 RNFP 180 gr.
.44 RNFP 200 gr.
.44 RNFP 240 gr.
.44 SWC 240 gr.
.45 SWC 185 gr.
.45 SWC 200 gr.
.45 RN 230 gr.
.45 Colt RN 160 gr.
.45 Colt RNFP 180 gr.
.45 Colt RNFP 200 gr.
.45 Colt RNFP 250 gr.
Stock #
K07-15257
K07-15258
K07-15279
K07-15259
K07-15291
K07-15260
K07-15282
K07-15288
K07-15261
K07-15262
K07-15263
K07-15292
K07-15264
K07-15281
K07-15265
K07-15266
K07-15267
K07-15285
K07-15283
K07-15274
K07-15275
K07-15276
K07-15269
K07-15270
K07-15271
K07-15293
K07-15295
K07-15272
K07-15273
500
$33.59
36.35
36.35
39.44
33.58
35.43
34.20
36.05
36.35
39.44
40.98
40.98
40.98
41.28
38.52
45.60
46.83
48.67
46.83
48.67
57.31
57.31
47.45
48.68
51.76
48.68
46.83
48.68
58.54
1000
62.60
67.70
67.70
73.44
62.54
65.98
63.77
67.14
67.70
73.44
76.30
76.30
76.30
76.88
71.72
84.90
87.20
90.64
87.20
90.64
106.70
106.70
88.36
90.66
96.40
90.66
87.20
90.66
109.00
Sierra Rifle Bullets(This is not
LOADED ammunition.)
5.56mm/.224 Caliber
52 gr. HPBT MatchKing
100/box
K07-10178
$24.95
55 gr. BlitzKing
100/box
K07-14458
24.95
69 gr. HPBT MatchKing
100/box
K07-13007
24.95
(Requires 1x7” to 1x10” barrel twist.)
500/box
K07-18171
139.95
77 gr. HPBT MatchKing
(Requires 1x7” to 1x8” barrel twist.)
6mm/.243 Caliber
70 gr. HPBT MatchKing
100/box
K07-12386
29.95
6.5mm
100/box
K07-14459
39.95
123 gr. HPBT
142 gr. HPBT
100/box
K07-14460
42.95
7.62mm/.308 Caliber
168 gr. HPBT MatchKing
100/box
K07-10177
37.95
175 gr. HPBT MatchKing
100/box
K07-17481
39.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
46 Berry’s Manufacturing Preferred Plated Bullets
K07-17210
K07-17209
K07-17233
Bullets for the 7.62 x 39 Cartridge
Stock #
Description
110 gr. RN
K07-17210
Caliber .30 M1 Carbine Bullets
Description
Stock #
K07-17209
110 gr. RN
.380 Caliber Bullets
Description
Stock #
K07-17532
100 gr. RN
9 Millimeter Makarov Bullets
Description
Stock #
95 gr. RN
K07-17233
9 Millimeter Bullets
Description
Stock #
115 gr. RN-DS*
K07-17533
115 gr. HBRN-TP*
K07-17178
K07-17534
124 gr. RN-DS*
124 gr. HBRN-TP*
K07-17272
124 gr. HBFP
K07-17385
K07-17535
147 gr. RN
.357 Caliber Bullets
Description
Stock #
125 gr. FP
K07-17536
K07-17535
K07-17539
250
$44.64
500
$86.30
1000
$160.70
250
35.74
500
69.10
1000
128.68
250
21.69
500
41.94
1000
78.08
250
24.63
500
47.62
1000
88.60
250
23.49
24.68
24.32
27.38
24.68
28.40
500
45.42
47.70
47.00
52.94
47.70
54.94
1000
84.56
88.80
87.48
98.40
88.80
102.20
250
25.18
500
48.70
1000
90.60
K07-17237
Stainless Steel High
Dial Caliper Tech
• .100 per revolution.
• Covered track for longer caliper life
– keeps chips out!
• Made of hardened stainless steel.
• Satin chrome finish. No glare.
• Easily read to .001-inch on large,
adjustable dial.
• Measuring faces hardened, ground
and lapped.
K07-13462
$28.00
$9.99
K07-17549
STREAMLIGHT
T
Accurate,
Easy to Read!
K07-17171 $39.95
he Streamlight TLR-1 is powered by
two 3-volt CR123 lithium batteries and
has a shockproof super high-flux LED. The
Streamlight TLR-2 features an integrated
laser sight for accurate aiming.
TLR-1
K07-18832
$119.95
TLR-2
K07-18835
299.95
Duracell 3-V K07-16993
6.95
BLACKHAWK!
Sling for Collapsible-Stock ARs
T
K07-15478
K07-17547
Digital
Caliper
UTG AR15 Brass Catcher
Brass Catcher
K07-17546
K07-17538
29.26
56.58
105.40
148 gr. HBWC
K07-17540
30.20
58.40
108.60
158 gr. RN-DS*
158 gr. FP-DS*
K07-17539
30.50
58.98
109.80
.40 Caliber/10 Millimeter Bullets
Description
Stock #
250
500
1000
K07-17237
29.38
56.80
105.60
135 gr. FP-DS*
155 gr. FP
K07-17541
35.30
68.26
127.00
155 gr. HBRN-DS*
K07-17238
33.86
65.46
122.00
K07-17232
33.32
64.40
120.00
165 gr. FP
K07-17271
37.80
73.08
136.00
165 gr. HBFP
180 gr. FP-DS*
K07-17542
35.30
68.26
127.00
.44 Caliber Bullets
Stock #
200
400
800
Description
240 gr. FP
K07-17545
45.00
88.00
164.00
.45 Caliber Bullets
Description
Stock #
250
500
1000
K07-17547
34.30
66.30
123.40
185 gr. SWC
185 gr. HBRN-DS*
K07-17543
37.42
72.36
134.60
200 gr. FP-DS*
K07-17537
37.50
72.52
135.00
K07-17548
37.50
72.52
135.00
200 gr. SWC
230 gr. RN-DS*
K07-17549
41.36
79.96
148.80
*DS = Double Struck, TP = Thick Plate, HB = Hollow Base, RN = Round
Nose, FP = Flat Point, SWC = Semi Wadcutter, WC = Wadcutter
his tool provides that
“third hand” you need to
remove the handguards on carbines
and full sized AR15 style rifles. All
areas that contact the rifle are protected
to prevent damage to the rifle’s finish.
Fits the AR15, M16 and M4.
Handguard Tool K07-15479 $14.99
F
ully adjustable 3-point sling design
with a bilateral transition buckle
allows shooting from both strong or support side for proper cornering. Available
in coyote brown only!
Tactical Sling
K07-15480
$9.99
Concealed Carry Tote47
$
4500
K07-18193
‘Plan B’ Day Planner
D
illon’s “Plan B” Day Planner Holster holds a handgun
and a spare magazine or pepper spray, yet it fits in with
business clothing and won’t draw undue attention. It looks
like a typical day planner, but inside there’s a holster that’s
adaptable for either right- or left-hand draw. It fits most
.380, 9mm, .40 and .45 caliber autos, including: Beretta,
Colt, Glock, HK, Kahr, Kel-Tec, Ruger, Taurus, SIG, and
Smith & Wesson. Will also hold small-frame revolvers with
two- to four-inch barrels.
“Plan B” Day Planner
K07-10252
$24.95
D
illon’s Concealed Carry Tote accommodates all the tools
you need to survive the urban jungle!
This low-profile carry case looks like a mild-manneredcomputer-nerd accessory, but it’s designed for your pistol as
well as your PC! Made of rugged nylon fabric, with heavyduty zippers on all three main compartments – one
designed to hold a laptop computer, one for folders and
paperwork, and one in the middle for a handgun.
Inside the case are pockets and pouches that will hold
spare magazines as well as folding knives, letter openers,
flashlights, cell phones, full-sized 8.5”x11” paper note
pads, etc. Measures 13.5” x 11.5” x 6.5” deep.
TUFF PRODUCTS MAG POUCHES
Front view with flap.
Front view without flap.
T
uff Products Magazine Pouches are the most versatile we’ve ever
seen. They can be worn on a belt or attached to anything that has
a MOLLE fastener system; for instance, the Dillon Range Bag, a tactical vest or body armor carrier. Available in black or coyote brown.
Comtech’s STINGER
Rear shows loops and Molle fasteners.
Black 8-Magazine Single-Stack (1911)
Brown 8-Magazine Single-Stack (1911)
Black 5-Mag. Double-Stack (9/.40 Glock)
Brown 5-Mag. Double-Stack (9/.40 Glock)
K07-19854
K07-19855
K07-19856
K07-19857
$39.95
39.95
39.95
39.95
Arredondo Accessories’ Multi-Gun Chamber Flags
T
HE STINGER: Comtech’s own personal
defense device. Designed to act as a
“force multiplier,” it’s like having the
punching power of a karate master –
instantly! There’s really nothing like it
for easy carry and access.
Plus, it passes un-noticed
by 90 percent of people
who see it. Yup, just
another “keychain
device” to most, and yet it
works so well when needed. You’ll
love your Stinger and undoubtedly draw a great deal of security and peace of mind from it’s mere
presence. You deserve a Stinger today!
Comtech STINGER Keychain
K07-19495
$9.95
M
ade of supertuff nylon with a melting point of 480
degrees. Kit includes one shotgun chamber flag and one
for your AR-15.
K07-15485
$11.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
48
Are YOU Ready?
ise Company’s twoWeek essential Survival Product & Food Kit for
one person (or one week for
two people). Kit includes:
Packages of Pocket Tissue (6)
4-in-1 Dynamo Flashlight (1)
Deck of Playing Cards (1)
Water Proof Matches (50)
Waste Bags (2)
Note Pad (1)
Golf Pencil (1)
Mylar Sleeping Bags (2)
Leather Palm Work Gloves (1)
36 Piece Bandage Kit (1)
Water Filtration Bottle (1)
Portable Stove (1)
W
$179.00
K07-15298
Stove Fuel Tablets (16)
Metal Fork (1)
Knife and Spoon (1)
Sierra Cup (1)
Wise Emergency Food Supply
(44 Servings) including:
Savory Stroganoff
Chili Macaroni
Creamy a la King and Rice
Pasta Alfredo
Creamy Pasta and Veg Rotini
Teriyaki and Rice
Creamy Tomato Basil Soup
Hearty Tortilla Soup
Apple Cinnamon Cereal
Brown Sugar and Maple Cereal
Crunchy Granola
e prepared for any emergency with Wise Company’s 72 Hour
emergency entrée Kit. Each kit includes four servings per
day (total of 12 servings) of 20 ounce lunch and dinner entrées
shown in the following schedule: Day 1: Two 10-ounce servings of
Cheesy Lasagna and Beef cook-in-the-pouch entrée; and two 10ounce servings of Pasta Alfredo with Chicken cook-in-the-pouch entrée. Day 2: Two 10-ounce servings of Noodles and Beef in Savory
Mushroom Sauce cook-in-the-pouch entrée; and two 10-ounce
servings of Teriyaki Chicken
and Rice cook-in-the-pouch
entrée. Day 3: Two 10-ounce
servings of Chili Macaroni with
Beef cook-in-the-pouch entrée;
and two 10-ounce servings of
Creamy Pasta and Vegetable
Rotini with Chicken cook-inthe-pouch entrée.
K07-15296
ise Company’s 60 Serving Gourmet entrée only “Grab
and Go” Food Kit includes two servings per day (entrées
only) for one adult for one month or four adults for one week. Product within this Bucket
is: Savory Stroganoff (8
servings), Chili Macaroni (8 servings), Pasta
Alfredo (8 servings),
Creamy Pasta and Vegetable Rotini (8 servings), Cheesy Lasagna
(4 servings), Teriyaki
and Rice (8 servings),
Creamy Ala King and
Rice (8 servings), and
Creamy Tomato Basil
Soup (8 servings).
K07-15297
ise Company’s 60 Serving Gourmet Freeze Dried Meat
“Grab & Go” Food Kit includes 60 servings of assorted
gourmet-seasoned freeze dried meat and a 20-serving bonus of
long-term emergency rice, for a total of 80 servings. Product
within this Bucket
is: Roasted Chicken
(12 servings), Teriyaki
Style Chicken (8 servings), Cheesy Beef (8
servings), Southwest
Style Chicken (12 servings), Savory Roasted
Ground Beef (12 servings), Stroganoff Style
Beef (8 servings), and
Long-Term Instant Rice
(20 servings).
K07-15299
ise Company’s 120 Serving Breakfast only “Grab &
Go” Food Kit includes 120 servings of breakfast assortment (no entrées). Product
within this
Bucket
is: Apple Cinnamon Cereal
(40 Servings),
Crunchy Granola (40 Servings), and
Brown Sugar
and Maple
Multi-Grain
(40 Servings).
ise Company’s 120 Serving Freeze Dried Vegetable
and Sauce “Grab & Go” Food Kit includes 120 servings
of vegetable and
sauce assortment.
Product within this
Bucket is: Corn (24
servings), Peas (16
servings), Broccoli (24
servings), Green
Beans (24 servings),
Butter Sauce (8 servings), Cream Sauce (8
servings), Cheese
Sauce (8 servings),
and Mushroom Sauce
(8 Servings).
W
B
$37.95
W
$125.00
W
W
$119.95
W
$190.00
K07-15303
ise Company’s 120 Serving Freeze Dried Fruit and
Snack “Grab & Go” Food Kit includes 120 servings of
fruit and snack assortment. Product within
this Bucket is: Bananas (16 servings),
Strawberries (16 servings), Peaches (16
servings), Apples (16
servings), Caramel
Sauce (16 servings),
Yogurt (16 servings),
and Pudding (16
Servings).
$129.00
$139.00
K07-15302
K07-15300
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Get a Grip With Hogue 49
B.
A.
A. Hogue Rubber Pistol Grips
Beretta 92 (Finger Grooves)
K07-16660
$17.95
Colt GM (Finger Grooves)
K07-12803
17.95
Ruger Mark II, RH
K07-16664
17.95
B. The Hogue HANDALL™ Grip Sleeve fits
many semi-autos.
HandAll
K07-14463
$8.95
C.
C. Hogue Square Butt Monogrips
Colt Python
K07-12138
K, L-Fr. Sq. Butt
K07-12786
K07-12145
N-Fr. Sq. Butt
N-Fr. Rd. Butt
K07-18100
D. Hogue Round Butt Monogrips
Ruger SP-101
K07-14833
K07-12277
S&W J-Fr. Rd. Butt
K, L-Fr. Rd. Butt
K07-12549
$17.95
17.95
17.95
17.95
$17.95
17.95
17.95
D.
E.
E. Hogue Bantam Boot Grips
S&W J-Fr., Rd. Butt
K07-11054
$17.95
K, L-Fr., Rd. Butt
K07-11055
17.95
Hogue Hex Head 1911 Grip Screws (Fourscrew set).
Blue
K07-15723
$8.99
Stainless
K07-15722
8.99
Cavalry Arms Medical Trauma Kits
N
obody likes to think about it, but should a serious
hunting/shooting accident occur, chances are the
drugstore “first aid kit” you have stashed under the seat of
your truck won’t do much good. That’s why Cavalry Arms
Medical has produced trauma kits designed by Armed
Forces medics.
The Cavalry Arms Medical P.T.K. (Personal Trauma Kit)
contains a 15-gram package of Celox granules to control
serious bleeding, Nitrile gloves, a high-intensity ChemLight, a six-inch Emergency Bandage with a second pad,
and a 4.5-inch Kerlix Roll.
The A.T.K. (Advanced Trauma Kit) contains one 15gram package of Celox granules, Nitrile gloves, a CPR
Face Barrier, two VioNex Anti-Microbial Wipes, a highintensity Chem-Light, two 4-inch Emergency Bandages,
one 4.5-inch Kerlix Roll, two 2-inch Kerlix Rolls, one 3inch Elastic Bandage, and two 5 x 9-inch sterile Abdominal Pads. All contents of both kits are currently in use by
real-world combat medics.
Personal Trauma Kit (P.T.K)
Advanced Trauma Kit (A.T.K.)
K07-19220
K07-19322
$29.95
69.95
T
S
treamlight’s Nano Light® LED
flashlight is super bright (10
lumens), can be seen a mile away, is
made of virtually indestructible
machined aluminum with an
anodized finish, is weatherproof,
nearly weightless and fits on your
keychain or zipper pull tab!
K07-19942
$11.95
C
yalume Technologies ChemLight Tactical Light is made in West Springfield, MA, USA to US Military Specifications and provides up to 12 hours of illumination. We’re selling the green version,
NSN 6260-01-074-4229, in individually
wrapped single quantities or 10 packs.
You never know when, or for how long,
you’re going to need light.
K07-19362 $2.18 ea., $18.00 Pkg. of 10
he Otis Technology, Inc.
Breech-to-Muzzle Cleaning
System cleans
rifles .22 to .50
cal., shotguns
.410 bore to 10
gauge and pistols
.22 to .45 cal.
The system
includes
three memoryflex
rods,
three
forged
brass tips,
two obstruction removers, a
T-handle, 0.5
ounce solvent,
all-caliber patches, a shotgun brush
adapter, two patch savers, five bore brushes, a bore reflector and a cleaning guide.
Lifetime warranty!
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
K07-18174
$39.95
50
“Big Fifty Reloader”
STANDARD FEATURES:
• 4-Station Interchangeable Toolhead
• Uses Std. 1-1/2”-12 UNF Thread Dies
• Manual Shellplate indexing
• Average Loading Rate: 300 Rds./Hr.
• Loads High Volume/Match-Grade Ammo
• Milspec/Match-Grade Priming System
• Ductile Iron/Carbon Steel Construction
All for ONLY...
$
999
95
K07-50000
Total price as pictured here with
optional accessories: $2434.75
.50 BMG Carbide Size Die
K07-50075
.50 BMG Case Trimmer
K07-50050
BFR Mounting Post (50.5” High)
K07-50150
BFR Mounting Hardware Kit
K07-50140
$799.95
$374.95
$249.95
$9.95
BFR Accessories
D. 50 BMG PRIMER SEATING DIE
A. 50 BMG CASE TRIMMER
ASSEMBLY
Features an industry standard
1-1/2”-12 UNF threaded body,
a 1/4 HP motor, replaceable
carbide cutter, quick-disconnect cord and includes the .50
BMG trim die.
K07-50050, $374.95
A.
D.
B.
B. 50 BMG CARBIDE SIZE DIE
The only .50 BMG size die in the industry that’s a full-length solid carbide size
die, for increased die life and scratch
resistance. It also has a solid carbide
expander ball, placed in the middle of
the power stroke for easier operation.
The die body is standard 1-1/2”-12 UNF
thread, and is manufactured to low
chamber tolerance specifications.
K07-50075, $799.95
C. 50 BMG POWDER
MEASURE ADAPTER
One of these is included with Dillon’s
Big Fifty Reloader, but may be used as an
accessory on a separate toolhead. The
primer seating die is adjustable for
enhanced control of primer seating.
Includes two primer punches: one flat,
match-style primer punch and one
cupped, milspec primer punch.
K07-50200, $149.95
E. 50 BMG PRIMER POCKET SWAGER
Makes it easy to remove the military crimp.
K07-50001, $299.95
E.(1) PRIMING CONVERSION
Converts Swager to Priming System.
K07-50003, $74.95
F. 50 BMG PRIMING SYSTEM
Allows off-the-machine primer seating.
K07-50002, $299.95
F. (1) SWAGER CONVERSION
Converts Priming System
to Swager.
K07-50004, $74.95
C.
E./F.
For use with the RCBS .50
BMG powder measure.
K07-50125, $74.95
RCBS LOADING ACCESSORIES THAT CAN BE
USED WITH DILLON’S BIG FIFTY RELOADER
EXTRA “BFR” TOOLHEADS
.50 BMG Manual Powder Measure
K07-21896, $114.95
.50 BMG Seat/Crimp Die
K07-21895, $139.95
K07-19831, $179.95
51
The Dillon Deluxe
Pistol Cleaning Kit
SACK-UPS
“SAFE SACKS” FOR YOUR GUNS
illon’s Deluxe Pistol Cleaning Kit includes: a Dewey
Nylon Coated Cleaning Rod; Dewey bronze bore
brushes in .22, .38, .40 and .45; a Dewey patch loop; a
Dewey Nylon Gun Parts Cleaning Brush; a 4 oz. spray
bottle of M-Pro 7 Gun Cleaner; a 0.5 oz. bottle of Snake
Oil; and a 4cc tube of Snake Oil Weapon Grease. Comes
packaged in Dillon’s Large Utility Box.
K07-97066
$56.95
Sack-Ups Protective Gun Sacks
Handgun, 13.5” Gray
K07-17249
Handgun, 13.5” Black
K07-17250
Handgun, 13.5” Natural
K07-17252
Shotgun, 42” Black
K07-17253
Rifle/Shotgun, 52” Gray
K07-17247
Rifle/Shotgun, 52” Black
K07-17248
Rifle/Shotgun, 52” Natural
K07-17251
Muzzleloader, 72” Gray
K07-17254
Shotgun Rcvr., 24” Gray
K07-17257
Shotgun Bbl., 36” Gray
K07-17256
Sack-Ups Old West Gun Protection
Single-Action Revolver
K07-18000
Lever-Action Carbine 42”
K07-18001
Buffalo Rifle 48”
K07-18003
Dillon Aero Hat, Navy
Dillon Aero T-Shirt, Navy, Medium
Dillon Aero T-Shirt, Navy, Large
Dillon Aero T-Shirt, Navy, X-Large
Dillon Aero T-Shirt, Navy, XXL
Dillon Aero T-Shirt, Navy, XXXL
Dillon Precision, Long Sleeve
Navy, Large K07-18507 $19.95
Navy, XL
K07-18508 19.95
Navy, XXL
K07-18509 20.95
Navy, XXXL K07-18510 22.95
Gray, Large K07-18523 19.95
Gray, XL
K07-18524 19.95
Gray, XXL
K07-18525 20.95
Gray, XXXL K07-18526 22.95
Black, Large K07-18515 19.95
Black, XL
K07-18516 19.95
Black, XXL
K07-18517 20.95
Black, XXXL K07-18518 22.95
D
Wear The “Dillon” Brand
K07-11319
K07-10707
K07-10708
K07-10709
K07-10710
K07-10711
K07-10444
$11.95
12.95
12.95
12.95
14.50
14.50
$7.99
7.99
7.99
10.99
8.99
10.99
8.99
11.99
8.99
8.99
$8.99
10.99
10.99
11.95
Dillon Precision, Short Sleeve
Navy, L
K07-18511 $12.50
Navy, XL
K07-18512 12.50
Navy, XXL
K07-18513 14.50
Navy, XXXL K07-18514 14.50
Gray, Large K07-18527 12.50
Gray, XL
K07-18528 12.50
Gray, XXL
K07-18529 14.50
Gray, XXXL K07-18530 14.50
Black, Large K07-18519 12.50
Black, XL
K07-18520 12.50
Black, XXL
K07-18521 14.50
Black, XXXL K07-18522 14.50
The Dillon Shooting Mat
Dillon’s shooting mat is made of
tough ballistic-weave nylon fabric, with
a large skid-resistant elbow pad area. The
“ground” side is moisture resistant and
wipes clean easily.
The padding is dense, closed-cell
foam to provide both shooter comfort
and a stable shooting base. The mat is
equipped with a shoulder strap, a carry
handle and two straps with snap-release
buckles.
Dimensions: 66” x 27.75”
Shooting Mat
K07-18146
$65.00
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
52
REDDING
Reloading Dies
& Accessories
Micrometer-Adjustable Competition Seating Dies (These are individual dies.)
Competition Pistol Seating Dies
K07-10671 $89.95
9mm
.38 Super Auto
K07-10672
89.95
.38 Special/.357 Mag. K07-10673
89.95
K07-10674
89.95
.40 S&W/10mm
.44 Special/.44 Mag. K07-10675
89.95
.45 ACP
K07-10676
89.95
K07-10677
89.95
.45 Colt/.454 Casull
Competition Rifle Seating Dies
.45-70 Gov’t
K07-11197 $89.95
Complete Three-die sets – Size, bell, seat
.32 ACP
K07-15521 $59.95
.32-20 Winchester
K07-11906
55.95
.38-40 Winchester
K07-11838
74.95
.38-55 Win./Ballard
K07-19106
75.95
.44-40 Winchester
K07-11692
44.95
.45-70 Gov’t
K07-12700
59.95
Complete Two-Die Sets
.204 Ruger
K07-12547 $52.95
.22 Hornet
K07-11484
43.95
.220 Swift
K07-12182
43.95
.22-250
K07-15761
43.95
.243 Winchester
K07-15762
43.95
.243 WSSM
K07-11193
66.00
.25-06 Remington
K07-12183
42.95
.25 WSSM
K07-11194
66.00
.260 Remington
K07-09997
55.50
.270 Winchester
K07-10822
44.95
K07-18337
49.95
.270 WSM
6.5 Grendel
K07-19893
89.95
6.5 x 55mm Swedish K07-11353
42.95
K07-12548
58.95
6.8 SPC
7 x 57mm Mauser
K07-11212
39.95
7mm WSM
K07-18339
59.95
K07-18338
49.95
7mm Rem. SA UM
7mm Rem. Ultra Mag. K07-18340
49.95
7mm Rem. Mag.
K07-11775
43.95
K07-12041
42.95
7mm-08 Remington
7.5mm Swiss
K07-09995
99.00
7.62 x 39mm Russian K07-12045
54.95
K07-29020
57.00
.30-30 Winchester
.30-40 Krag
K07-11835
59.95
7.62 x 54mm Russian K07-09994
76.50
.300 AAC Blackout
K07-12550
79.95
.300 WSM
K07-15763
49.95
.300 Rem. SA UM
K07-18341
59.95
.300 Rem. Ultra Mag. K07-18342
49.95
.300 Weatherby
K07-11354
42.95
.300 Win. Mag.
K07-12046
39.95
.303 British
K07-11691
55.95
8 x 57mm Mauser
K07-09996
55.50
.338 Win. Mag.
K07-11774
42.95
.338 Lapua Mag.
K07-21354 159.95
Individual Dies: Neck-Size-Only Dies
.223 Remington
K07-10164 $32.00
.22-250
K07-11184
32.00
.243 Winchester
K07-10172
32.00
.25-06
K07-11336
32.95
K07-09993
37.80
.260 Remington
.270 Winchester
K07-11806
32.00
7mm Rem. Mag.
K07-11392
32.00
32.00
.308 Win./7.62 NATO K07-10165
.30-06
K07-11763
32.00
.300 Win. Mag.
K07-11108
32.00
Crimp Dies
.30 Carbine
K07-12892 $24.95
.32 S&W/H&R Mag. K07-11747
29.95
K07-11977
29.95
.45-70 Gov’t
Powder Measure, Reloading Accessories
Match-Grade Model 3 BR Measure
K07-10121 $174.95
Large (7.5”) Powder Reservoir
K07-10123
$9.50
X-Large (10”) Powder Reservoir
K07-10124 $12.50
Powder Trickler
K07-11986 $24.95
Stuck Case Removal Kit K07-12186 $19.95
Specialty/Custom Die Sets
.30 Carbine
K07-20625 $101.95
(This .30 Carbine die set includes a Dillon
Carbide size die, a Redding seat die and
Redding crimp die.)
.50 AE
K07-14514 $49.95
(Incl: RCBS steel size, expander, seat/crimp)
.500 S&W
K07-11114 $49.95
(Incl: RCBS steel size, expander, seat/crimp)
RCBS Carbide .500 S&W Size Die only
K07-19923 $36.95
s New Bench Wrench
RCBS EQUIPMENT Dillon’
Fits new 1” die lock rings
A
Trim Pro™ Case Trimmer Kit
K07-15021 $119.95
Includes: RCBS Trim Pro manual case trimmer, plus an assortment of shell holders and pilots for most popular calibers.
Shell holders 2, 3, 4 and 10. Pilot calibers: 22, 24, 25, 27, 28,
30, 35, 44 and 45.
RCBS Scale Check Weights
Standard Set: 60.5 grains for powder charges.
K07-12297 $34.95
Deluxe Set: 510.5 grains for bullets, cases and powder.
K07-12458 $49.95
characteristic of virtually all progressive reloading machines, regardless of brand, is that the dies are set rather
close together. When you are first setting up a “naked” machine, there is plenty of wrench room, but if you have a need
to adjust a die afterward, it often requires a delicate touch to
maneuver a lock ring on a crowded toolhead.
Dillon Precision has addressed this in two ways. We now
offer new 1” die lock rings and a 1” Bench Wrench to fit
them. This combination gives much more room to re-adjust
dies after they’re already mounted. The opposite end of our
new wrench is a 7/16” box-end for adjusting the Powder Bar
of any Dillon Powder Measure. Our new lock rings fit any
standard 7/8” x 14 dies.
1” Dillon Die Lock Ring
K07-14067
$1.35
5-Pack of Die Lock Rings
K07-10669
4.15
1” Dillon Bench Wrench
K07-10842
7.95
(Buy two or more 1” Bench Wrenches for $7.10 each)
Wrench/Lock Ring 5-Pack
K07-10668
9.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Grace USA53
Caspian Arms
Gun Care Tool Set
Pocketsmith Multi-Tool
This custom
designed 12” x 9” x
1-1/2” case is made
from durable soft
Nukaf and contains
a 17-piece set of
Grace USA Gun
Care Screwdrivers
(8 ea.), Solid Brass
Pin Punches (8 ea.)
and a specially fabricated 8 Oz. Brass
Hammer. The
screwdrivers are
hand-assembled
and custom hollow
ground to fit scope
screws, plug screws, guard screws, etc. The handles are
turned from quality Maine hardwood and protected with
a smooth finish. Made in USA.
T
he Caspian Arms Pocketsmith
MultiTool is an absolute must
for every 1911 owner’s range bag!
$34.95
K07-18955
Grace USA Gun Care Tool Set
K07-10680
$84.95
Bondhus Hex Key Sets Streamlight
Stylus PRO
Penlight
T
Ball-end set
Gorilla Grip Sm.
Gorilla Grip Lg.
Gorilla Grip Set
K07-13286
K07-16822
K07-16823
K07-22142
$12.95
5.45
6.35
10.75
hese 532 gram DESI ® PAK desiccants absorb moisture better than
silica gel. It’s an industrial grade
material that exceeds the requirements of Mil Spec MIL-D-3464E.
Now available in smaller packages
for other applications (ammo cans,
long-term storage containers, etc.).
DESI ® PAK (2 bags, 1 card)
K07-21435
$16.95
4-ounce bag K07-14694
4.95
2-ounce bag K07-14695
2.95
Stylus Pro
Humidity Indicator Card, 6 pack
K07-21523
4.95
K07-18876 $29.95
DOC ALLEN’S VERSATOOL
D
oc Allen’s Versatool fits easily in your pocket and functions as either a screwdriver or a
wrench. The Versatool includes
11 tool bits and an extension
shaft with the loop handle. The
loop slides to three different
positions to provide varying
degrees of leverage to suit the
needs of the job at hand.
K07-15757 $12.95
The Tru-Weight Trigger Tension Scale has a range from
eight ounces to eight pounds.
A unique weight indicator
remains at the exact point of
trigger release, making it easier to read your trigger pull
pressure.
K07-14838 $26.95
Grace USA Gunsmith Hammer
and Punch Sets
8 oz. Brass Hammer
K07-14969 $14.95
16 oz. Brass Hammer
K07-15069 $17.95
Brass Punches (8-Pc.)
K07-14968 $31.95
Steel Punches (7-Pc.)
K07-15070 $31.95
8 oz. Brass Hammer and 8-pc.
Brass Punch Set
K07-21655 $39.95
The B-Square 32 Piece Gunsmith Screwdriver Kit contains 11 slotted bits
designed to eliminate screw
head damage, 8 hex bits, 3
Phillips bits, 2 Posi-Drive
bits, 2 Torx bits, 3 extra-long
bits (1 each: Phillips, slotted,
hex), and a 1/4” socket drive
adapter. Get one for your
workbench AND your range
bag!
K07-18410 $29.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
NRA Pistol and Rifle Targets
54
HARTMAN MFG
Target Stands
Pistol Targets: 100 per package
NRA Paper D-1 “Tombstone” Target 23x35
IDPA Paper Practice Target 22x34
USPSA/IPSC Paper Practice Target 22x35
50 Foot TIMED/RAPID FIRE 10.5x12
Competition 50 Foot SLOW FIRE 10.5x12
Competition 25 Yard SLOW FIRE 10.5x12
Police (Silhouette) 25 Yard 14x24
Police (Silhouette) 25 Yard 22.5x35
Competition 25 Yard RAPID FIRE 21x24
Competition 50 Yard SLOW FIRE 21x24
Police (Silhouette) 50 Yard 22.5x35
Rifle Targets: 100 per package
Small Bore Rifle 100 Yard 14x14
High Power 200 Yd. 21x24 (600 Yd. reduced)
Replacement Center 100 per package
Pistol 25 Yard B8P Repair Center 10.5x10.5
200 Yard Rifle Repair Center 12.75x12.75
Target Pasters
Black, Self-Adhesive, 250 per roll
Buff, Self-Adhesive, 250 per roll
Brown, Self-Adhesive, 250 per roll
White, Self-Adhesive, 250 per roll
Orange, Self-Adhesive, 250 per roll
Bennie Cooley’s
Safety Magazines
• Weighted to simulate a fully loaded mag
• 1911 practice mag works for all calibers
• Glock mags work in both 9mm and .40
• If necessary, fitting is easily done with
any file
1911/Clones
K07-16866
$14.95
Glock 17, 22
K07-16872
14.95
Rugged!
Portable!
Easy-to-Use!
K07-18388
K07-15735
K07-15836
K07-15832
K07-15831
K07-13096
K07-13163
K07-10094
K07-12839
K07-10041
K07-10670
$39.95
39.95
39.95
7.95
7.95
8.50
12.50
27.50
17.50
17.50
27.50
K07-12430
K07-12650
$7.50
34.50
K07-12676
K07-15830
$4.95
13.45
K07-15835
K07-15834
K07-16538
K07-15833
K07-16301
$1.50
1.50
1.50
1.50
1.50
One Target Stand K07-18237
$44.95
A Pair of Stands
K07-74493
79.95
One Hostage Target Adapter (Shown
above in contrasting color for clarity.
Works only with Hartman target stands.)
K07-11697
22.95
A Pair of Target Spikes (Inset)
K07-11393
22.95
D•WIPE Towels
ESCA TECH, INC.
D
D•LEAD Hand Soap
ESCA TECH, INC.
O
•WIPE Towels
were specially
designed for immediate clean up of most
contaminants without
water. The soft 5.5”x
8” towels are saturated with a unique
cleansing formula
and aloe vera, and
will remove heavy
metals from skin and
other surfaces.
40 Soft Towels
K07-19916
$4.95
riginal D•LEAD
Hand Soap
quickly cleans heavy
metals as well as
paint dust and firing
range residue from
the skin and fingernails. Removes lead,
nickel, cadmium, arsenic, mercury, silver,
zinc and most other
heavy metals.
8 Oz. Bottle
K07-19915
$2.95
Action Impact Reducers
Gunslinger Spring Kits
From Lee Fisher, one of the premier
“cowboy gunsmiths.”
Colt & clones
K07-20510 $26.95
Ruger Blackhawk/Vaquero
K07-20511 $24.95
Marlin 94
K07-20512 $18.95
Rossi/Navy Arms 92 lever guns
K07-20513 $24.95
Stoeger IGA shotgun
K07-20514 $14.95
Peacemaker Specialists’
These wooden-handled screwdrivers
were designed to fit most SAA screws.
SAA 2-Driver Set K07-15486
$19.95
P
rotect your 1911’s frame from being
battered by recoil.
1911 (6 ea.)
K07-20516
$4.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Apex Tactical Specialties Parts for Smith & Wessons 55
A. S&W M&P Pistol Sear
D. Duty/Carry Spring Kit for S&W J-Frame Revolvers
(w/frame-mounted firing pin)
B. S&W M&P Competition Spring Kit
E. S&W Revolver
Frame-Mounted Firing Pin
C. S&W M&P Ultimate Striker Block Kit
A. S&W M&P Pistol Sear
K07-21889
M&P 9/40
M&P 45
K07-21892
B. S&W M&P Competition Spring Kit
M&P 9/40
K07-21891
C. S&W M&P Ultimate Striker Block Kit
M&P 9/40
K07-21890
D. S&W J-Frame Spring Kit
K07-14309
E. S&W Revolver Firing Pin
K07-21888
$39.95
39.95
24.95
34.95
24.95
15.99
T
UFF
QuickStrips
8
$ 50
A.
T
B.
W
ild Bodie Tom’s Winchester 97 Six-Round Conversion is
designed for “Wild Bunch” Cowboy Action Shooting competition. To increase the capacity of your Model 97 by one round, you
simply remove the magazine end cap, remove the spring and follower, replace with the supplied spring and follower, and re-install
the magazine end cap. Proudly made in the USA!
A. Solid-Frame Model 97 Winchester K07-11644
$29.95
B. Take-Down Model 97 Winchester
K07-11645
29.95
MILDOT MASTER
(Pkg. of 2)
UFF QuickStrips are available for an incredible variety of
revolver calibers from .17 HM2 to .500 Linebaugh!
.22 LR-Magnum/.17HM2-HMR (10 rd.)
K07-11737
.32/.327/9mm (8 rd.)
K07-11738
.38/.357/.40/10mm (5 rd.)
K07-11740
.38/.357/.40/10mm (6 rd.)
K07-11741
.38/.357/.40/10mm (8 rd.)
K07-11742
.41Mag./.45 acp (6 rd.)
K07-11748
.44 Sp.-Mag./.45 Colt/.460 S&W/.410 Shotshell (6 rd.) K07-11750
.45 Auto Rim (6 rd.)
K07-11751
.475/.480/.500 S&W (5 rd.)
K07-11755
.500 Linebaugh (5 rd.)
K07-11756
Galati
Deluxe Pistol Case
Y
ou can become a master at using
a Mil Dot reticle with this ballistic
slide rule! Comes with a 24-page
instruction manual.
Mildot Master® K07-14762 $29.95
itsabox!
H
olds three handguns in separate
padded pockets, features internal
pockets for magazines and has an
outside accessory pocket. Made of
PVC Tactical Nylon.
K07-40079 $27.95
7.5” x 14” x 10”
K07-14239 $14.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
56 California Competition Works’ Moon Clip Loading/Unloading Tools & Carriers
D.
A.
E.
C.
B.
H.
A. Super Demooner Tool
B. Original Demooner Tool
C. MoonLoad/Unload 6-Shot .45
D. MoonLoad/Unload 8-Shot .357
E. 6-Shot Moon Clip Holder (2 ea.)
F. 7-Shot Moon Clip Holder (1 ea.)
K07-15240
K07-18169
K07-19489
K07-19490
K07-18173
K07-18384
I.
$34.95
16.95
39.95
39.95
17.90
11.50
North
Mountain
Speed Loader
Holder
$11.50
9.80
10.50
11.20
19.95
MAXFIRE
Speedloaders
$
1295
M
axfire Speedloaders: A new design with no moving parts – unidirectional grooves and retention clips hold cartridges in place.
M1K – 8-Shot S&W Performance Center 627; Taurus 608 K07-11041
M2K – S&W 10, 15, 19, etc. ; Dan Wesson; Charter Arms; Taurus
65, 82 etc.; Rossi 851, 951, 971; Colt Det. Spl., etc.
K07-11042
M3K – 6-Shot S&W N-Frame .357; Ruger .357 RedhawkK07-18458
M4K – 5-shot S&W 36, 60 etc.; Charter Arms; Taurus 85; Rossi 68;
Ruger SP-101
K07-11043
M5K – S&W 586, etc.; Ruger GP-100; Colt Python, etc. K07-11044
M6K – 7-Shot S&W 686 Plus; Taurus 617, Tracker
K07-11045
M8K – Colt Mk III, Mk IV, etc.; Ruger Security Six, etc. K07-11046
M13K – 5-Shot Taurus .45 Colt
K07-18459
M14K – S&W 29; Ruger Redhawk; Taurus .44
K07-11047
M16K – 5-Shot Taurus .44 Special
K07-18460
M21K – 5-Shot Taurus .41 Magnum
K07-18461
SDM
W.C. Wolff Co.
Revolver Springs
S&W Revolver
Front Sights
“Classic” Slip-In Sight – $35.00
.250” high, red
K07-18375
.250” high, green
K07-18376
.300” high, red
K07-18377
.300” high, green
K07-18378
“Classic” Slip-In Sight – $44.95
.250” high, Gold Bead
K07-18567
.300” high, Gold Bead
K07-18568
(Hammer/Trigger Return Springs)
Ruger GP-100
K07-11367 $10.50
SP-101
K07-12598
9.50
S&W J Frame
K07-12189
9.00
(Mainspring/Rebound Springs)
S&W K,L,N (standard)
K07-15073 $15.00
S&W K,L,N (reduced power)
K07-15072 15.00
A.
B.
K07-30000
K07-25343
$22.00
45.00
Jerry Miculek
Competition
Grips
$67.99
S&W N-Fr. Rd. Butt
N-Fr. Sq. Butt
K, L-Fr. Rd. Butt
K, L-Fr. Sq. Butt
K07-11324
K07-11325
K07-11327
K07-11326
Hogue
“Big
Butt”
Grips
Tools from L. Bengtson Arms Co. for Smith & Wesson Revolvers
A. Rebound Spring Tool
B. Ejector Rod Tool
G.
Sold in Packages of Two
The North Mountain IDPACompliant Speed Loader
Holder is made specifically for the competitive
IDPA revolver shooter.
Lightweight at 2.9 Oz., it
firmly holds your competition speed loader. It is fitted with a Tek Lok™ to
mount to your range belt.
It fits Comp III and similarsized speed loaders.
“K-Frame” Model
K07-21900 $30.00
“L-Frame” Model
K07-21914 $30.00
Pin-In Front Sight – $28.00
.250” high, red
K07-18379
.250” high, green
K07-18380
.300” high, red
K07-18381
.300” high, green
K07-18382
Pin-In Front Sight – $44.95
.250” high, Gold Bead
K07-18565
.300” high, Gold Bead
K07-18566
F.
J.
K07-18385
G. 8-Shot Moon Clip Holder (1 ea.)
H. Blued .45 ACP Moon Clips (10 ea.)
K07-18183
Not Pictured, Generic Stainless Steel .45 ACP Moon Clips
K07-18280
(10 ea.)
I. 10mm Moon Clips (10 ea.)
K07-18184
J. 8-Shot .357 Moon Clips (10 ea.)
K07-19228
Hogue Competition
S&W Revolver Thumb Latch
fits K, L, and N-Frames
Stainless K07-19921 $59.95
$59.95
S&W N-Fr. Rd. Butt
K, L-Fr. Rd. Butt
K07-12141
K07-12140
Johnson
Precision
Mag Racks, Laser Cut Moon Clips
J
ohnson Precision’s Mag Rack™ moon clip retention system
holds eight of your moon clips in place with strong magnets. The
Mag Rack may be permanently attached to a belt with included
fasteners, or temporarily with the optional belt loops.
Mag Rack, 8-Shot 627
K07-25367
$149.95
Mag Rack, 7-Shot 686 and 6-Shot 625
K07-25368
149.95
Mini Mag Rack, 10-Shot 617 .22 LR
K07-25386
74.95
Accessory Belt Loops
K07-25369
9.95
627 Moon Clips (Starline, Remington Brass) K07-14308 39.95/10 pk.
North
Mountain
Moon Clip
Holder
California Competition Works 57
.22 LR Speedloader
C
alifornia Competition Works’ 10-Round Speedloader for S&W
Model 617 .22 LR Revolvers is ideal for Steel Challenge or
Ruger Rimfire Series competition. The speedloaders are machined
from 6061 T6 aluminum, then black anodized. The Loading Block
(inset photo) is CNC machined from polymer and holds 120 rounds
of .22 LR ready for insertion into speedloaders.
CCW Model 617 Speedloader
K07-12623
$34.95
CCW .22 LR Loading Block/Case
K07-12627
49.95
Stainless EDM 8-Shot Moon Clips
t
I
’ve tried several methods of holding my moon clips, and this
works best for me! My hand only has to go to one place, so I no
longer grope around frantically for my reloads. – Mark Pixler
For 610/625, 7-Shot 686, 8-Shot 627 K07-21883
$130.00
hese .025 eDM
Stainless Moon
Clips are designed
to fit remington
brass SNUGLY,
eliminating nasty
“cartridge flop”
when you reload.
5995
$
K07-16510
Sold in Packages of 10
for 8-Shot S&W
627 Revolvers
Safariland Competition Gear for Revolver Enthusiasts
002 “Cup Challenge”
$69.95
6” S&W K,L,N; Std. bbl.
K07-17788
333 “Speedloader Holder”
$34.95
S&W K-Frame
K07-12411
S&W L-Frame
K07-13087
“Competition Speedloaders” $19.95
S&W K-Frame
K07-13224
S&W L-Frame
K07-13117
Revolver “Speedloaders”
$11.95
S&W J-Frame (5-Shot)
K07-12405
S&W K-Frame
K07-13104
S&W L-Frame
K07-13074
“Speedloader” Holders
$9.95
Sm./Med. Fr.
K07-10340
“Speedloader Loading Blocks” $24.95
S&W K-Frame
K07-12262
S&W L-Frame
K07-12878
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
58
We’ve got your GLOCK stuff...Right HERE!
A.
C.
B.
F.
E.
D.
H.
I.
Ghost 3.5 trigger Stop Connector
A. The Ghost 3.5 Trigger Stop Connector shortens trigger movement, eliminates over-travel and provides the fastest trigger reset.
Can be fitted to all Glock pistols.
3.5 Trigger Stop
K07-14760
$24.95
Ghost Bullet and Forward Slide release
The Ghost Bullet Slide Release was designed with a wider, longer
thumb tab that is unobtrusive and sits closer to the frame when not
in use. The Forward version addresses the issues of shooters who
use the “modern technique” (with thumbs high and pointing towards the muzzle) by placing the thumb tab forward so that it sits
between the thumbs, eliminating the problems shooters experience
with the modern technique. It also places the thumb tab within easy
reach of the forefinger of left-handed shooters.
B. Bullet Slide Release
K07-18630
$14.95
C. Bullet Forward Slide Release
K07-18629
19.95
Glock Factory original Parts:
D. Extended Mag Release (Sm. Frame)
K07-18569
$9.95
G.
J.
E. Extended Slide Release
K07-18570
F. Striker Cups (The ones you always lose.) K07-19325
G. Striker Channel Liner
K07-18881
Lone Wolf Glock Parts:
H. Extended Mag Release (Lg. Frame)
K07-19115
I. Extended Take-Down Lever
K07-19114
J. 3.5# Trigger Stop Connector
K07-16501
Extended Slide Stop
K07-22299
Wolff Spring Co. Glock Parts:
Competition Spring Set
K07-11524
Trigger Return Spring 3-Pack
K07-11818
X-Tra Power Trigger Rtn. Spr. 3-Pk.
K07-15558
Guide Rod, Glock 17, 22, 31
K07-11356
Guide Rod, Glock 19, 23
K07-11435
Guide Rod, Glock 20, 21
K07-11352
Recoil Spring, 12#
K07-11420
Recoil Spring, 14#
K07-11418
Recoil Spring, 15#
K07-11419
19.95
4.95
9.95
4.99
9.95
14.95
15.99
$9.95
7.99
7.99
24.95
24.95
24.95
7.99
7.99
7.99
Lone Wolf Distributors’
Match-Grade GLOCK Barrels
T
hese replacement barrels are manufactured from the highest
grade mill-select 416 stainless forgings. Standard land-andgroove rifling makes these an excellent choice if you wish to shoot
lead, plated or jacketed bullets. Can be used in factory ported or
stock pistols. Ready to use, pre-fit drop in. No gunsmithing required.
Glock 17 9mm Barrel
K07-19167
$99.95
Glock 19 9mm Barrel
K07-19326
99.95
Glock 20 10mm Barrel
K07-19241
99.95
Glock 20 .40 S&W Conversion Barrel
K07-19805
99.95
Glock 20 .357 SIG Conversion Barrel
K07-19806
99.95
Slide Removal Tool
STUL
E
Fits All Glock Models
ngages the slide lock and provides a
mechanical advantage making
slide removal easier
and faster. For
those with large
fingers, small
fingers, tired
fingers, anyone
looking for a way
to simplify the removal
of your Glock slide.
K07-19527
$11.95
Glock 20 9x25 Dillon Conversion Barrel
Glock 21 .45 ACP Barrel
Glock 22 .40 S&W Barrel
Glock 22 9mm Conversion Barrel
Glock 22 .357 SIG Conversion Barrel
Glock 23 .40 S&W Barrel
Glock 23 9mm Conversion Barrel
Glock 34 9mm Barrel
Glock 35 .40 S&W Barrel
Glock 35 9mm Conversion Barrel
K07-19807
K07-19242
K07-11526
K07-11527
K07-19808
K07-19327
K07-19328
K07-19330
K07-19329
K07-19331
114.95
99.95
99.95
99.95
99.95
99.95
99.95
99.95
99.95
99.95
10-8 Performance Armorer Tool
T
he 10-8 Performance Armorer Tool is a simple, non-marring
tool useful for applications where prying or poking with metal
tools can easily damage your work. The rigid chisel-pointed end
and semi-flexible flat blade end each have unique uses.
K07-15434
$7.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
™
A-Grip
$
24
95
A
-Grip™ from Brooks Tactical is specifically designed
for gripping firearms in combat
conditions and has a proven
track record of reliable performance. Agrip actually works better with wet or sweaty hands.
K07-18464
Beretta 92/96
Browning HP
K07-18465
Glock 26,27,28,33K07-18466
Glock 29,30
K07-18467
Glock 19,23,25,32,36
K07-18468
Glock 17,22,24,31,34,35,37
K07-18469
K07-18470
Glock 20,21
Kel-Tec P11, P40 K07-18471
Kel-Tec P32
K07-18472
1911 (Incl. Para, STI, SVI, etc.)
K07-18473
Ruger P Series
K07-18474
Sig 220-226
K07-18475
K07-18482
Springfield XD
Universal 5”x 8” Sheet
K07-18483
Decal-Grip
™
7
$ 00
TRUGLO
THE
PLUG $7
P
re-cut textured adhesive
strips that provide a tactical
advantage in grip control in
$
59
extreme working conditions.
Glock 17/18/22/24/31/34/35
K07-16025
(Finger Groove)
K07-10827
Glock 19/23/25/32 K07-16071
(Finger Groove)
K07-10828
Glock 20/21
K07-11297
HK USP 9/.357/.40K07-10855
HK USP .45
K07-10854
Kahr P & PM
K07-18282
Springfield XD
K07-18283
Springfield XD & XD45
K07-19212
Springfield XDM K07-43215
10-8 Performance
99 Glock Sights
95
95
Installs in a snap and protects your Glock’s internal parts from dust, dirt, rain, snow and lint.
Glock Models 17, 19, 20, 21, 22, 23 (fit may
vary)
K07-18161
Model 21SF
K07-19925
Models 26, 27, 33
K07-10235
Model 30
K07-10648
4th Gen Glocks
K07-17087
PEARCE
GRIP, INC.
T
RUGLO’s Tritium/Fiber Optic T.F.0.
BRITE•SITE Handgun Sights use a combination of Tritium and Fiber Optic technologies.
Small-Frame Glock
K07-18654
Large-Frame Glock
K07-18655
Most Kimber Models
K07-18656
Springfield XD
K07-11602
Smith & Wesson M&P
K07-18627
4995
$
9
$ 95
Grip extensions do not alter mag. capacity.
Glock 26/27
K07-10346
G29 (10 rd.)/30 (9 rd. opt. mag.)
K07-10355
G30 (10 rd. mag. only)
K07-10356
Kel-Tec P11/Taurus PT111
K07-18586
Springfield XD (9mm/.40 only)
K07-18587
Mag. extensions add additional capacity.
Glock 10mm/.45 ACP (+2)
K07-18589
Glock 9/.357/.40 (+2 or 1)
K07-18588
G27/33 (+1)
K07-18590
G36 (+1)
K07-10650
Beretta 92; Sig 228, 229; Browning Hi Power
(+2)
K07-18591
NEW
RUGLO’s Fiber Optic BRITE•SITE Handgun Sights use traditional Fiber Optic
technology.
Small-Frame Glock
K07-18657
Large-Frame Glock
K07-18658
Most Kimber Models
K07-18659
Springfield XD
K07-11603
Smith & Wesson M&P
K07-18628
$29.95
29.95
29.95
29.95
29.95
29.95
K07-15435 $44.95
Rear, .156” U-Notch
K07-15436 $44.95
GTUL
A
C
K07-12268
K07-15489
K07-15493
K07-15494
K07-15492
K07-15490
Rear, .140” U-Notch
T
Factory
Glock
Mags!
G-17, 17 rd.
G-19, 15 rd.
G-20, 15 rd.
G-21, 13 rd.
G-22, 15 rd.
G-23, 13 rd.
.215” High Front Sight K07-15437 $39.95
leaning your Glock magazines has
never been easier! GTUL has developed an integrated system to disassemble
and clean all Glock magazines without
marring, gouging, or damaging the metal
liner. Quickly removes dirt, dust, powder
residue and grime!
Standard Mags
K07-20910 $21.95
Large Mags
K07-20911
21.95
rredondo’s extended magazine base
pad adds capacity to your magazines!
The Arredondo base pad comes with a new
spring and an installation tool that also acts
as a floorplate removal tool you’ll need to
disassemble and clean your mags.
Small-Frame Glock K07-19125
$39.95
Lg-Frame Glock (not for 29/30)
K07-19124
39.95
Base Pad & Spring Kit for Springfield XDs
9mm/.40 (+3 or 2)
K07-15568
$23.00
XDM
K07-15569
23.00
.45 XD (+3)
K07-15570
23.00
Extended Mag Base Pads for S&W M&P
9mm/.40 M&P
K07-19103
$19.95
Base Pad Kit with Spring for S&W M&P
9mm/.40 M&P
K07-19104
$23.00
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
60
1.
Shooting Tips: The IDPA Classifier; Sta
The start position for String 6 is facing away from the targets, standing
upright, hands at sides.
2.
A good, fast pivot is largely a matter
of footwork. Start with the feet
parallel to each other, toes pointed
forward, most of the weight on the
left foot, so much so the right toes
are lifted off the ground (exaggerated
in this shot to make the point).
8.
9.
Demonstrated live fire, a key to a
fast pivot is, at the start signal,
swiftly snapping the head around to
look at the center of the first target.
The hands have already begun
moving toward the gun.
The turn is completed before the gun
is out and both hands on the gun.
At the start signal, lift the right foot
and pivot it toward the outside
on its ball.
The foot continues to pivot around
on its ball, its front is still not
touching the ground.
3.
By Duane Thomas
An IDPA Master Tells You How to Do It, Too!
Having addressed Strings 5 and 7, the one
hand only strings, together in the last installment
of this series on shooting the IDPA classifier, we
now backtrack to String 6 to finish out Stage 1.
STRING 6: Modified El Presidente, start with
three rounds in the gun: fire one round each T1T3, slidelock reload, one more round each T1-T3.
(My time: 6.98 seconds.)
This is, by IDPA classifier standards, a long, complex string of fire. Thus we have many opportunities
to carve out huge chunks of time with improvement
to our technique. Lots of tips on this one.
Tip #1: We begin facing away from the targets.
When turning to engage, we want to turn toward
our strong side: i.e. if right-handed turn clockwise.
We want to turn around the gun which actually
moves very little because it’s right over our pivot
foot. This makes it much easier to draw the gun
fast; otherwise we wind up chasing it with our
hand as the piece moves in a big circle.
Tip #2: We turn fully around BEFORE the gun
begins its extension, otherwise we’ll still be
4.
swinging our body as the gun moves forward,
leading to shots pulled wide. To ensure we begin
our fast turn correctly, at the instant the timer
buzzes, we SNAP our head around and look
right at the center of the 8” circle on the first target. Our body will swiftly follow our head. If we
incorporate the head snap into our technique,
along with a few other tricks we’ll discuss shortly, we will turn so fast there’s literally no way we
could complete the draw before our body has
fully turned around and is stable.
Tip #3: Also to facilitate our fast turn, while
waiting for the buzzer we slightly lift the front of
our right foot (assuming a right-handed shooter) off
the ground. This is very subtle, no one watching
would be able to tell we were doing it. (I mention
that to indicate how little movement is required,
not to indicate we’re doing anything sneaky; this is
quite legal.) At the buzzer, having unloaded the
weight on the front of our foot, it’s very simple and
easy to just pivot on the rear ball. By contrast, if we
pivoted on the front of the foot, that would require
lifting up the rear ball then lowering it back down
after the turn; this imparts a lot of movement to the
age 1, String 6: Modified El Presidenté
10.
61
11.
12.
13.
After the turn is completed, the gun
is extended toward the target.
To cut down time on the IDPA
“emergency reload,” use the support
hand thumb to drop the slide.
The slide stop is thumbed down, the
gun chambers a fresh round, the gun
is ready to go again and the support
hand can instantly slide back into a
shooting grip.
The foot continues to pivot on its
ball, front still not touching the
ground, the right foot comes off the
ground and begins to swing around.
The front of the left foot hits
the ground oriented toward the
target, the right foot continues to
come around.
The left foot hits the ground, now
the shooter is in the normal
shooting stance, but faced in the
opposite direction.
Leave the gun at eye level during the speedload.
5.
6.
entire body that unbalances us, giving our body
after the pivot a back-and-forth, side-to-side swing
that makes it seriously difficult – if not impossible –
to fire that first, accurate, aimed shot fast, and is
just generally a loser of a technique. By contrast,
turning on the ball of the foot does not require lifting our body up, then back down, the contact portion of our body to the ground, and therefore our
body as a whole, stays on the same level throughout the pivot. This allows the body to stabilize after
the pivot MUCH faster.
IMPORTANT: The front of the right foot does
not touch the ground until after the body is completely turned around.
Tip #4: When reloading, keep the gun high, in
line of sight, don’t drop it down. We’re just going
to have to bring it back up again to fire after the
reload anyway; why add all that excess movement
and time by going up then down?
Tip #5: Drop the slide with the support hand
thumb on the slide release, it’s much faster than
slingshotting the slide.
Tip #6: Again we have an instance where
shooting with both eyes open becomes very
7.
important. With both eyes open we’ll be able to
see the next target in our peripheral vision even as
we’re moving the gun to it, rather than having it
suddenly appear in our vision.
Tip #7: Prep the trigger between targets. It saves
immense amounts of time if, when the gun arrives,
it’s ready to fire instead of having to complete that
first trigger pull on the next target from scratch
AFTER it gets there.
We have now completed Stage 1. As I mentioned in Part 1 of the series, I am giving you,
for each string, the times I posted on the classifier run when earning my Stock Service Pistol
Master rank. As we have seen thus far, my times
for each string were decent but not blazingly
fast. Accuracy-wise, I dropped seven points for
the entirety of Stage 1. Thus we figure my score
for the stage thus:
STAGE 1 RAW SCORE: 26.99 seconds
DROPPED POINTS: 7 x 0.5 = 3.50 seconds
OVERALL SCORE: 30.49 seconds
In our next installment, we continue on to
Stage 2, and discuss shooting while moving,
D
Strings 8 and 9 of the IDPA classifier.
P
62
All Your Dillon-Video Favorites, NOW AVAILABLE On DVD!
“Firestorm in the Desert (Machine Gun Magic)” – Dillon’s own
video portraying the history and excitement of the machine gun
hobby. 60+ min.
“Machine Gun Magic” DVD format
K07-18312
$14.95
“The Memphis Belle”/“The Fight for the Sky”
Two-DVD Set
K07-18320
$24.95
“Shooter Ready?” – Top quality instruction with all the
excitement of a major motion picture. 30 min.
VHS format
K07-13361
$15.95
“Shooter Ready?” DVD format
K07-18313
$14.95
“P51 Mustang”/“Corsair”
Two-DVD Set
K07-18321
$24.95
SAVE $9.95 – Buy Both Air War DVD Sets
Lyman 49th Edition
Reloading Handbook
– Featuring More
Loads, the Newest
Components, Most
Manufacturers, and
More Load Data than
Ever!
K07-10330 $24.95
Lyman’s Pistol and Revolver Reloading
Handbook (Third Edition) – The World’s
Leading Handgun Reloading Manual.
K07-18967 $21.95
Lyman Shotshell Reloading Handbook,
5th Edition – The
Number One Shotshell
Loading Manual.
K07-12846 $25.95
Reloading Guides – These
guides are compiled from
the most recent data available from all the major
powder and bullet manufacturers.The convenient
binding allows the guide to
lie open and flat on your
bench.
$12.99 each.
Revolver Guide
K07-40010
.45Colt/.454/.460/.475/.480/.500 K07-40060
Pistol Guide
K07-40009
.223/.22-250 Guide
K07-11762
.243/.270 Guide
K07-40081
.308/.30-06 Guide
K07-12209
.300 Win, Short, Ultra Mag
K07-12210
7mm-08/7mm Rem, Ultra Mag K07-12211
Speer Reloading Manual, Rifle & Pistol
(Number 14) – The ultimate loading guide for
shooters who are using
Speer projectiles.
K07-12580 $29.95
K07-18319
The Complete Reloading Manual for…
Pretty much anything
you’re likely to be loading! That’s right, all the
data published by the
various bullet and powder manufacturers for
YOUR favorite cartridge.
$9.95 each
Handgun-Cartridge Manuals
.32 H&R Magnum
K07-15361
.380 ACP
K07-15362
9mm
K07-15363
.38 ACP
K07-15365
.38 Special
K07-15364
.357 Magnum
K07-15366
10mm/.40 S&W
K07-15367
.44 Special
K07-15368
.44 Magnum
K07-15369
.45 ACP
K07-15370
.45 Colt
K07-15371
Rifle-Cartridge Manuals
.223
K07-15349
.22-250
K07-15348
.243
K07-15350
.270
K07-15351
7mm-08
K07-15352
7mm Remington Magnum
K07-15353
7.62 x 39
K07-15359
.30 M1
K07-15354
.30-30
K07-15355
.308
K07-15356
.30-06
K07-15357
.300 Winchester Magnum
K07-15358
.45-70
K07-15360
T
he Concealed
Handgun
Manual – How to
choose, carry, and
shoot a gun in
self defense, Sixth
Edition by Chris
Bird – With more
than 50 years as a
handgun shooter
on three continents, former
crime reporter
Chris Bird describes what it takes to fight
back against violent criminals and win.
If you carry a gun for personal protection – or plan to – you need to read this
book. It could save your life! 543 Pages
K07-11648 $24.95
$39.95
Gun-Guides
Complete
guides for all
models of
Ruger .22 pistols,
10/22 rifles and
Mini-14s; and dis/reassembly guides for other popular
firearms.
The Complete Guide
$11.99 each
Ruger .22 Pistols
K07-40035
Ruger 10/22 Rifle
K07-40036
Ruger Mini-14
K07-40037
Dis-/Reassembly Only
$6.99 each
1911 Pistols
K07-40045
AK-47
K07-40038
Browning Buckmark
K07-40039
Colt AR-15
K07-40040
Glock Pistols
K07-40041
M1 Carbine
K07-40042
M1 Garand
K07-40043
Mauser Rifles
K07-40044
Mosin-Nagant Rifles
K07-40046
Mossberg 500 Shotguns
K07-40047
Remington 870 Shotguns
K07-40048
Remington 1100 Shotguns
K07-40049
Ruger Mk III Series .22 Pistols K07-40050
Ruger Single-Action Revolvers K07-40051
SKS Rifles
K07-40052
1903 Springfield Rifles
K07-40061
Springfield XD & XDM Pistols K07-40053
Winchester 1300 Shotguns
K07-40054
Propellant Profiles (Fifth
Edition) – The most comprehensive reference on
gunpowder available to
American reloaders over
the last 45 years.
K07-27051 $39.95
Traveler’s Guide to the
Firearm Laws of the Fifty
States – The myriad of
firearm laws facing the
gun owner of the early
21st century can be intimidating when traveling.
K07-30201 $9.95
Practical Shooting: Beyond
Fundamentals – The keys to
consistent, high-speed
shooting are within you
right now. This book will
show you ways to bring
them out.
K07-10750 $19.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
Viking Tactics DVDs, Books & 35” x 23” Rifle Target 63
rifle Drills DVDs
Viking Tactics, Inc. brings you battle proven tactics
and weapon handling techniques. All primary instructors have Special Operations backgrounds as well as
extensive real world experience.
DVD#1
K07-40055
$19.95
DVD#2
K07-40056
19.95 Viking Tactics Double-Sided Rifle Target (Pkg. of 10)
Stay in the Fight!
Warriors Guide to the
Combat Pistol
K07-40063 $40.99
3
Green eyes &
Black rifles
Warriors Guide to the
Combat Carbine
K07-40062 $34.99
GM “Shooting Techniques of the Grand
Masters” brings you the
experience and know
how of three of the top
Grand Masters in the
sport today: Max Michel,
Saul Kirsch and Angus
Hobdell. Each shares
with the viewer his technique in skills like stance and balance,
recoil control, accuracy, the draw, specialty
draws, reloads and transition between positions. This production highlights the differences between the techniques used by
these champions. Watch, learn and choose
which technique works best for you. Run
time: 160 minutes.
K07-11630 $49.95
U
ltimate Advanced Revolver
with Jerry Miculek – The
World’s Greatest Revolver Shooter Jerry Miculek is recognized as
the fastest and most accurate
revolver shooter in the world. His
speed and skills are, in one
word…Amazing! They’ve been
verified in hundreds of local and
national competitions. In this program, he shares with you some of
the techniques and secrets he has
mastered over the past 25 years to
become the shooter he is today.
And, you’ll see an incredible display of revolver shooting and
reloading. 100 min.
K07-14608 $19.95
“rifle Malfunctions”
DVD
K07-40064 $19.95
“Pistol Drills”
DVD, Part One
K07-40065 $19.95
B
ennie Cooley’s 11
“Mastering the AR15 Rifle” One World
Sniper Championship,
two SWAT Team Championships, three SOF 3Gun World Championships, and five USPSA
3-Gun National Championships. That’s 11
Major Championships won by Bennie Cooley and his AR-15 Rifle. “Bennie Cooley’s
11” is an instructional DVD packed full of
information designed for the competitive
shooter – or ANYONE who wants to MASTER the AR-15. Learn from the best! Over
100 minutes of personal instruction.
K07-11631 $35.00
K07-40057
$10.00
“Pistol Drills”
DVD, Part Two
K07-40066 $19.95
C
ompetition
Reloading with
Brian Enos guides you
through a complete
step-by-step reloading
process for IPSC, Steel
Challenge and NRA
Bianchi Cup style
shooting. Using a Dillon Precision XL 650
reloader with CP brass
and CP bullets, Enos demonstrates proper
reloading techniques for the most popular
loads used by the top shooters. Enos is, of
course, a champion himself, winner of the
Masters Competition, the NRA Bianchi Cup
and a top contender in the USPSA for many
years. Run time: 80 minutes.
K07-14341
$19.95
American Gunsmithing Institute
employs the latest video technology and cutaway firearms to give
you a clear understanding of
exactly how your gun functions.
DVD format $39.95 ea.
“AR-15”
“Glock”
“Colt 1911”
“Ruger 10/22”
“Ruger Mini-14”
“M1 Garand/M1A”
“AK/AKS”
“SKS”
“Makarov”
“Building the FN-FAL Kit”
K07-18576
K07-18577
K07-18578
K07-18579
K07-18580
K07-18581
K07-18582
K07-18583
K07-18584
K07-18585
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
64
Dillon Precision’s Spotlight on Youth: D
By John Holsey
Being successful in a match is one thing, but
Today’s youth are not only the future of our
being successful in life is another. We started
shooting sports; they’re the future of our gun
home school last year and Dylan has already
rights. Without youth we have no future. Theremoved ahead two grade levels. He is precocious,
fore, it’s our responsibility as shooters, sportsman
smart, intuitive and a bit stubborn at times and it’s
and collectors to nurture our young people and
served him well thus far.
spotlight excellence.
Dylan shares his vast experience with anyone
The shooter I would like to
who may need help. He, at
talk about is one that I know
such a young age, is one of
quite well. In fact he is my
the most “out of the box”
son. He’s been shooting litershooters I have ever seen.
ally all his life. He was the
Always thinking of better
youngest in the world to start
ways of doing things, from
shooting in Cowboy Action
reducing time on a stage to a
competitions. He started at
safer, more-effective way of
the tender age of five years
shooting. This is just part of
old. His name is Dylan
the knowledge he freely
Holsey aka “Rattlesnake
shares. He doesn’t act like a
Wrangler.” The first thing I
“know it all” and is always
taught Dylan about guns was
eager to listen to what others
safety. I knew that if he was
say. He will then process that
going to be a successful
information and take what
shooter, he first had to be a
he can use.
safe shooter. So, with patience
He really likes helping
and determination, I taught
young shooters. In fact, in
him all about gun safety and
2010 he started The Ratwhat they were capable of
tlesnake Wrangler Youth
doing. He learned that guns
Sponsorship Program. It’s a
are not toys, but when used
program where we give away,
correctly they can be lots of
free of charge, complete
fun. I appointed him our
leather gun rigs and other
home “gun safety officer” and
shooting-related items to
he made sure that all the rules
young shooters. He came up
were followed to the letter!
with the idea so that more
Around age 10, Dylan
young people would be able
started winning in his age
to enter our sport, given the
Dylan and his proud father.
group, acquiring multiple
expense is more than many
State, Regional, Annual, National and World titles. families can afford. He said he also did it in hopes
In 2012 – at just 13 years old – he really exploded
that this sport would be around for his kids someon the scene in a big way. At Winter Range, the
day. I thought that was pretty good insight for an
National Championship of Cowboy Action Shoot11 year old, so I backed him 100 percent on this
ing, he not only won his category but also became project. We’re always looking for more sponsors of
the National Champion in Speed Pistol overall. To
the program so more kids can benefit from this.
top that, he was third OVERALL in the entire
Dylan’s success did not go unnoticed. In fact,
country! This made him the youngest ever to place the Discovery Channel found out about him and
that high and win a Speed Pistol event at the
wanted him for an episode of the TV show “AmeriNationals. After that, Dylan became the youngest
can Guns.” This show features Rich Wyatt and his
to win the overall Texas State Championship title.
family who own a gun store in Wheatridge, ColDylan’s practice regimen is nothing short of
orado. They not only sell guns, they also build
inspiring. In fact, it’s almost exhausting for me to
custom guns. They’re all really nice people and we
watch him do it. He dry-fire practices at least three enjoyed getting to know them. The biggest chalhours a day, and that is an underestimate I’m sure.
lenge Dylan faced was the sweet distraction of
When he doesn’t have a gun in his hand, his mind
Rich and Renee’s daughter Paige. I’m so glad
is always at work thinking of new ways of shooting Dylan wasn’t older because Rich is pretty dang
scenarios and different gun techniques, etc. It’s an
handy with a gun himself!
ongoing cycle at our house. During live-fire pracAll joking aside, Rich was very impressed with
tice sessions, he will go through around 4000
Dylan and we all became fast friends. Rich, and
rounds of .38 Special and four cases of shotgun
everyone at Gunsmoke, was great to work with.
shells in a weekend. It’s this dedication driven to
The show did a fantastic job of showcasing our
an obsession that enables his success.
sport and Dylan’s talent. At one point in the show
Dylan Holsey aka Rattlesnake Wrangler
Dylan had a shootoff with Jon Watson, one of the
gunsmiths at Gunsmoke. There were 18 glass
globes in a wooden grid, nine on one side and
nine on the other. The object was that whoever
broke their nine globes first would win. Dylan
would use his competition 1873 Winchester lever
gun, and Jon used a fully automatic Mac 10. On
Rich’s word the
shooting started.
Both shooters
blazed away and in
seconds it was over.
All the glass globes
were broken and
Dylan finished first!
Jon graciously
acknowledged
Dylan as the winner and went back
to the shop to build
an incredible lever
gun for Dylan. It
was amazing to witness this take place. They were
blown away seeing Dylan’s abilities in person!
After the “American Guns” episode aired, Fox
News did a spot on Dylan and me. Well…mostly
Dylan. It featured us shooting a stage, and yes he
65
beat me, but I gave him a run for his money! The
good thing was they really showcased our sport
and guns in a positive light. I was very proud to
be part of that show. We have other TV stuff in
the works right now and I’m sure you will see
more of us on TV in the future.
As you can imagine, I’m very proud of Dylan,
as I’m sure those
Dylan shooting the 1873
of you who have
Winchester built by the
children are proud
gunsmiths at Gunsmoke.
of yours. Watching
his growth in
shooting and in
life is something I
cherish greatly. I’ve
had the challenge
and blessing of
raising him on my
own since he was
two years old. Our
unique lifestyle
has enabled us to
travel, create opportunities and relationships that
will last a lifetime. Our journey is one that will
build memories for both of us to enjoy for the
rest of our lives. We are thankful for all who
D
share our journey!
P
Arredondo Multi-Function Squib Rod
Magazine Base Pad Tool/
Scope Battery Cap Remover
Scope Windage
Adjustment Tool
T
his is a MUST-HAVE range-bag accessory. It’s a squib rod (for
removing stuck bullets), magazine base removal tool, and scope
windage adjustment and battery cap removal tool.
K07-15250
$12.95
I
NSIGHT TECHNOLOGY’S HX150 Programmable LED Flashlight
comes with a limited lifetime warranty and is equipped with
Smart-Power Technology™ that allows the operator to pre-program
the desired “On” mode. A programmed mode can then be easily
turned off and reprogrammed to adapt to any newly desired “On”
mode. Modes of operation include: Constant On Mode, Momentary On Mode, Strobe Mode From On, Strobe Mode From Off,
Strobe Mode to Constant Mode, Strobe Mode OFF, Dimming
Mode, Dim to Bright Mode, Dim Mode OFF, Auto On/Off, and
S.O.S. Mode.
Insight Technology HX150
K07-18884
$99.95
Close & Ready Bedside Holster Caddy
K07-18046
$29.95
T
HolsteurdNedO
Incl
T
he key to the successful gunfighters of the Old West was
not so much the weapon of choice, but rather the holster.
How quickly the weapon could be retrieved, aimed and fired
was the difference between survival and becoming a statistic.
The Close & Ready Holster Caddy provides a faster and safer
way to protect your family. It works with most existing holsters
and slides easily between the mattress and box springs on
either side of your bed.
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
66
KEEPYOURGUNS! (Clean)
MIL-COMM
Extreme Performance Lubricants
Product is color-coded by
caliber. White shown here
for clarity only.
B
ore Snake, the “World’s Fastest Gun
Bore Cleaner”™ from Michaels of
Oregon is a better way to clean handguns, rifles and shotguns. Originally sold
as a field tool, this product is popular
with gunsmiths and benchrest shooters
as well. Try one and you’ll be hooked!
.22 cal. Pistol
.357/.38/9mm
.40 cal. Pistol
.44/.45 cal. Pistol
.22 cal. Rifle
.243 cal. Rifle
.270/7mm Rifle
.30 cal. Rifle
.357/.375 cal. Rifle
.410/.458
.50/.54/28 Ga.
20 Ga. Shotgun
12 Ga. Shotgun
37/40mm Launcher
K07-10426
K07-10427
K07-10428
K07-10429
K07-10420
K07-10421
K07-10422
K07-10423
K07-10424
K07-10425
K07-10432
K07-10431
K07-10430
K07-15465
$22.95
22.95
22.95
22.95
22.95
22.95
22.95
22.95
22.95
22.95
22.95
23.95
23.95
46.95
S
nake Oil is a derivative of an FDA certified medical lubricant
used in high-speed medical drills.
•Provides a film that
separates and protects
moving parts, for
smoother operation and
increased efficiency.
•Contains no evaporants
and has a film affinity in
excess of two years.
•Reduces the collection
of dirt, dust and other
contaminants.
•Performance in extreme conditions
is unparalleled.
0.5 oz. Bottle
K07-16035 $4.95
2 oz. Bottle
K07-16508
8.95
Grease, (2) 4cc Tubes K07-17073
4.95
0.5 oz. Oil, 4cc Grease K07-10059
5.95
T
W-25B is the choice of leading
firearms manufacturers, armorers, pro
shooters and gun enthusiasts, and is recognized as the world’s best all-purpose
weapons lubricant/protectant. It is now
widely specified by the U.S. military for
their most critical performance weapons
systems. Environmentally safe, non-carcinogenic, non-ozone-depleting.
0.5 Oz. Syringe
K07-15732 $8.95
1.5 Ounces
K07-15731 10.95
4 Oz. Semi-Fluid K07-18429 19.95
RO7™ Gun
Cleaner is odorless, non-toxic and
biodegradable. “Safely
cleans rifles, handguns,
shotguns, grenade
launchers, artillery
pieces, cannon, black
powder, corrosive
priming deposits and
much more.”
MP
MPro7 4 oz.
K07-10139
$11.95
MPro7 8 oz.
K07-10138
$18.95
J. Dewey Mfg. Co.
Cleaning Patches
Packages of 1000
.17 cal. (3/4” Sq.)
.22-.24 (1-3/8” Sq.)
Packages of 500
.24-.27 (1-3/4” Sq.)
.30-.35 (2” Sq.)
Packages of 250
.38-.45 (2-3/4” Sq.)
12-16 ga. (3” Sq.)
K07-11807
K07-11808
$12.95
14.95
K07-11809
K07-11810
$11.95
13.95
K07-11811
K07-11812
$11.95
13.95
E-Z Brite
Wonder Cloth
O
n gun dealers
shelves since
1976, this product is
still a must for keeping stainless steel
and nickel-finished revolvers looking like new. Demand the original
lead and carbon wipe!
E-Z Brite Cloth
K07-18613
$6.99
S
weet’s Australian
7.62 Solvent easily removes powder
residue and stubborn copper
fouling. It’s
harmless to
steel, a nonacid formula
with five percent
ammonia. If you
shoot a rifle, you
ought to try
cleaning it with
Sweet’s.
K07-13128
$12.95
MPro7 32 oz.
K07-11298
$40.95
S
B
rian Enos’ Far Superior Slide-Glide is a
dual grease blend, with proprietary
extreme pressure compounds, which boost
the ability of the oils in the grease to withstand extreme pressures. It gives the grease a
very stringy, tenacious character that makes
it stay where you put it.
Slide-Glide Standard is for use in warm
weather (F60º+), Lite is a thinner viscosity
for lower temperatures (F30º+).
Slide-Glide Standard K07-15571
$7.95
Slide-Glide Lite
K07-15572
7.95
M
icrolon UltraBlue protects, penetrates
and lubricates all surfaces. UltraBlue is
in use by the US Army Marksmanship Training Unit, the US Army Pistol and Rifle Teams
and the US Marine Corps Pistol and Rifle
Teams.
K07-75125
$9.95
LiP2000™ 725 Cleaner/
Degreaser should be
called “Super Degreaser.”
This cleaner will cut through
the toughest cosmoline, carbon, grease and grime! SLIP
2000’s™ Carbon Killer is
non-flammable, non-hazardous and biodegradable.
Carbon Killer provides you
with a safe, effective way to
clean carbon, lead and plastic wad fouling. Caution, may affect
blued finishes, read label BEFORE using.
725, 4 Oz.
K07-19236 $6.95
725, 16 Oz.
K07-19237 12.95
725, 1 Gal.
K07-19238 29.95
Carbon Killer, 4 Oz. K07-19233 8.00
Carbon Killer, 16 Oz. K07-19234 15.50
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
67
J. Dewey
Manufacturing Company
DEWEY Nylon Coated Cleaning Rods
K07-15461
$19.95
All Caliber Pistol 6"
(.22-.26 Jag Adapter for All Caliber 6" rod) K07-19894
3.25
(.27 & up Adapter for All Caliber 6" rod) K07-19895
3.25
.22-.26 Caliber Pistol 12"
K07-12985
21.45
.17 Caliber Rifle 26”
K07-11472
22.95
.17 Caliber Rifle 36”
K07-11473
25.95
.22-.26 Caliber Rifle 36"
K07-13084
23.45
K07-15462
23.45
.22-.26 Caliber Rifle 44"
K07-13021
21.45
.27 Caliber and up Pistol 12"
.27 Caliber and up Rifle 36"
K07-12991
23.45
.27 Caliber and up Rifle 44"
K07-15463
23.45
.35 Caliber and up Rifle 36"
K07-17096
29.95
.35 Caliber and up Rifle 44"
K07-17097
29.95
Shotgun Rod (Uncoated Brass)
K07-10473
19.95
2-pc Shotgun Rod
K07-15464
24.95
Brass Jags (Note: These jags ONLY fit Dewey Cleaning Rods!)
.22 Caliber Brass Jag
K07-10026
$2.75
.24 Caliber Brass Jag
K07-10027
2.75
.27 Caliber Brass Jag
K07-10025
2.75
.30 Caliber (and up) Brass Jag
K07-10867
2.75
.38 – .41 Cal. Brass Jag
K07-10028
2.75
.44 – .45 Cal. Brass Jag
K07-10243
2.75
Brass Patch Loop
Accepts most pistol and rifle patches K07-10737
$2.25
.17 Caliber Bore Brushes
.17 Caliber Rifle/Nylon (ea.)
K07-11475
$1.95
.17 Caliber Rifle/Bronze (ea.)
K07-11474
1.95
Nylon Bore Brushes
.22 Caliber Rifle (ea.)
K07-16144
$1.30
.243 Caliber Rifle (ea.)
K07-16145
1.30
.270 Caliber Rifle (ea.)
K07-16146
1.30
.30 Caliber Rifle (ea.)
K07-16147
1.30
.22 Caliber Pistol (ea.)
K07-16302
1.30
.38 Caliber Pistol (ea.)
K07-16148
1.30
.40 Caliber Pistol (ea.)
K07-16149
1.30
.45 Caliber Pistol (ea.)
K07-16150
1.30
Bronze Bore Brushes
Each/$1.50
5 pack/$5.50
.22 Caliber Rifle
K07-16278
K07-22089
.25 Caliber Rifle
K07-16293
K07-22094
.243 Caliber Rifle
K07-16280
K07-22091
drymate
™
K07-16274
.270 Caliber Rifle
K07-16273
.30 Caliber–7.62mm Rifle
.35 Caliber Rifle
K07-16281
.44–.45 Caliber Rifle
K07-16279
.22 Caliber Pistol
K07-16282
.38 Caliber –9mm Pistol
K07-16275
.40–.41 Caliber –10mm Pistol K07-16276
K07-16277
.44–.45 Caliber Pistol
Cotton Mops
.22–.27 Caliber (ea.)
K07-17089
.30–.38 Caliber (ea.)
K07-17090
.400–.450 Caliber (ea.)
K07-17091
K07-17094
16, 12 & 10 Ga. Shotgun (ea.)
M-16/AR-15 Breech Rod Guide/Chamber Brush
Breech Rod Guide
K07-10149
AR-15 Chamber Cleaning Brush
K07-11299
Deluxe M-16/AR-15 Lug Recess Cleaning Kit
Lug Recess Cleaning Kit
K07-18533
$1.45
1.45
1.45
1.60
$20.00
2.95
$27.95
Includes: Chamber Cleaning Rod, Lug Recess Cleaning
Head, Delrin Guide Sleeve, 50-pak Cotton Cleaning
Rolls, Chamber Brush, Chamber Mop, Double-Ended
Nylon Cleaning Brush.
Bolt Action Rifle Cleaning Rod Guides
All models fit .695-.700 bolt diameter rifles.
.17-.222, .225, .22/250, .220 Swift
K07-14196
.243 Caliber – 7mm
K07-14197
.30 Caliber
K07-14198
.338 Caliber
K07-14199
Muzzle Guards
AR-15/M-16
K07-16875
M1-A/M-14
K07-16876
M1 Garand
K07-16878
Ruger 10-22 Standard Bbl.
K07-16877
Ruger 10-22 Bull Barrel
K07-16879
Ruger Mini-14
K07-16880
Brass Muzzle Guard, .30 Cal.
K07-17245
Nylon Gun Parts Cleaning Brush
Parts cleaning brush
K07-16389
Precision Oil Bottle
1 Oz. w/brass applicator
K07-17095
J. Dewey Mfg. Co.
D
K07-22085
K07-22084
K07-22092
K07-22090
K07-22093
K07-22086
K07-22087
K07-22088
ewey’s AR-Link Cleaning Pin utilizes
the rear take-down pin in your AR-15
style rifle to hold the upper and lower
receivers open for cleaning. It fits all AR-15s
and AR-10s with standard and oversized
take-down pins up to .316” in diameter.
To use, 1) Depress the rear take-down
pin and pull out. 2) Pivot the upper and
lower receivers apart. 3) Insert the pin on the
AR-Link into the upper receiver take-down
pin tab. 4) Close receivers with the AR-Link
inserted into the lower receiver. 5) Push the
take-down pin through the channel in the
AR-Link to lock the upper and lower
receivers into place. 6) Clean your rifle. 7) To
remove AR-Link, reverse the above steps.
AR-Link Cleaning Pin K07-18599 $14.95
$18.95
18.95
18.95
18.95
$9.95
9.95
9.95
9.95
9.95
9.95
9.95
$2.25
®
$9.95
Barrel-Lite
K07-10529
$4.95
T
he drymate™ Gun Cleaning Pad protects
your table and firearms from scratches
and spilled cleaning fluids. Machine washable, durable, stain resistant and long lasting.
Gun Cleaning Pad™ K07-11313
$19.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
68
Wilson Combat
Elite Tactical Magazine – “The ETM started
with a blank sheet of paper and 30-plus
years of 1911 and 1911-magazine experience; designed from the ground up as a premium tactical magazine.”
ETM (8 rd) .45ACP K07-12027
$34.95
ETM (10 rd) 9mm K07-19463
$34.95
Wilson Combat Magazines – “No other .45
magazine on the market can compare for
proven inherent reliability, durability and the
ability to remain fully loaded for long peri-
ods of time without damage.”
WIL-ROG Mag (8 rd) .45ACP
K07-11714
$32.95
Match Magazine (7 rd) .45ACP
K07-10505
32.95
Officers Match Mag. (7 rd) .45ACP
K07-10506
32.95
SHOK-BUFF® Recoil System – Includes a
One Piece Guide Rod and Plug; six SHOKBUFF buffers; an Extra Power Firing Pin
Spring; an Extra Power Recoil Spring; and a
Reduced Power Recoil Spring.
SHOK-BUFF System K07-18150
$37.05
Wilson SHOK-BUFF® – A 1/10” thick poly
fiber buffer between the frame and slide
contact areas.
SHOK-BUFF Kit (2 buffers, 18.5# recoil
spring) Gov’t Model K07-18148
$5.95
SHOK-BUFF Buffer only (6 ea.)
K07-18147
$6.95
WOLFF GUNSPRINGS
Wolff RECOIL SPRINGS
BROWNING HI-POWER
18.5 Pound
K07-11373
COLT GOVERNMENT MODEL
9 Pound
K07-11719
10 Pound
K07-12193
12 Pound
K07-12007
13 Pound
K07-12443
14 Pound
K07-12338
16 Pound (Standard) K07-11860
17 Pound
K07-12192
18.5 Pound
K07-12465
20 Pound
K07-12056
23 Pound
K07-11377
COLT OFFICERS MODEL
24 Pound
K07-12110
$7.25
$7.25
7.25
7.25
7.25
7.25
7.25
7.25
7.25
7.25
7.25
$7.25
CZ 75B
9 Pound
K07-19348
10 Pound
K07-19349
11 Pound
K07-19350
12 Pound
K07-19351
13 Pound
K07-19352
14 Pound (Standard) K07-19353
SMITH & WESSON M&P
12 Pound
K07-19356
14 Pound
K07-19357
15 Pound
K07-19358
16 Pound (Standard) K07-19359
SPRINGFIELD 5” 9/40 XD
12 Pound
K07-19339
13 Pound
K07-19340
14 Pound
K07-19341
15 Pound
K07-19342
SPRINGFIELD
ARMORY
Magazines
Springfield Factory XD & XDM Magazines
16-Rd. XD 9mm
K07-11586
$31.95
12-Rd. XD .40
K07-11587
31.95
13-Rd. XD/XDM .45
K07-11585
32.95
19-Rd. XDM 9mm K07-15496
36.95
16-Rd. XDM .40
K07-19971
36.95
Two-Piece 1911 Recoil Spring Guide Rod –
Machined from stainless steel, includes plug
and Allen wrench. K07-15724
$24.95
$7.98
7.98
7.98
7.98
7.98
7.98
$7.98
7.98
7.98
7.98
$7.98
7.98
7.98
7.98
16 Pound
K07-19343
7.98
17 Pound (Standard) K07-19344
7.98
SPRINGFIELD 5” 45 XD
14 Pound
K07-19345 $7.98
16 Pound
K07-19346
7.98
18 Pound
K07-19347
7.98
SPRINGFIELD 4.5” 9/40 XDM
14 Pound
K07-19336 $7.98
16 Pound
K07-19337
7.98
18 Pound (Standard) K07-19338
7.98
Wolff GUIDE RODS
Smith & Wesson M&P K07-19354 $24.95
Springfield XDM 4.5 K07-19355 24.95
Wolff HAMMER SPRINGS
1911
K07-11511 $9.00
Wolff MAG CATCH SPRINGS
1911
K07-11791 $9.95
Chip McCormick Corp’s
“Shooting Star”
Magazines
Designed to give the serious pistol shooter the advantage of extra
shot capacity and improved performance. Floorplate drilled to
accept base pads.
.45 ACP SS Mag., 8-Rd.
K07-10311 $19.95
.45 ACP SS Mag., 10-Rd.
K07-15025 $25.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
CHECK-MATE 1911 Magazines
9mm 9-Rd.
K07-27043
$24.95
.38 Super 10-Rd.
K07-27044
$24.95
.40 S&W 9-Rd.
K07-27046
$24.95
10mm 9-Rd.
K07-27045
$24.95
.45 8-Rd. Comp.
K07-27049
$24.95
Adjustable
Target
Sight for
1911s
Evolution Gun Works
.45 10-Rd.
K07-27039
$31.95
10-8 Performance
1911 Sights
1911 NM-Style
K07-15440 $33.95
.315” Height, .140” U-Notch
Low-Mount Dovetail
K07-15438 $48.95
.325” Height, .140” U-Notch
T
hese two-piece flat checkered mainspring
housings with bolt-on mag wells are similar to the patented one-piece S&A design. The
mag well and checkered mainspring housing
are machined from solid bar stock steel and
can be used without the mag well attached,
although there will be a small dovetail below
(this does not impair function). This is a great
replacement for plastic mainspring housings
on full-size or commander model 1911s.
Stainless
K07-18600
$49.99
Blued
K07-18601
49.99
.45 8-Rd.
w/2 pads
K07-27047
$24.95
Base Pad
w/Screws
K07-18045
$2.50
69
T
his Adjustable Target Pistol Sight is precision machined and fits in a standard
“Bomar slide cut.” Yeah, the services of a
gunsmith are required to cut the slide
(unless your 1911 pistol already has a
Bomar cut) but the results are worth it.
Adjustable Pistol Sight
K07-18210
$53.95
Kimber/SIG 1911
K07-15439 $45.95
.140” U-Notch (Not for SIS Pistols)
Secure Firearm Products 1911 Armorer’s Tools
S
ecure Firearms Products’ 1911
Recoil Spring Tester (left) will help
you determine if the recoil spring in
your needs replacing, and you’ll save
time and money by testing and organizing loose recoil springs in your
shooting bag.
The 1911 Firing Pin Stop Tool
(right) is used to safely remove and
replace the firing pin stop from 1911style slides.
Recoil Spring Tester K07-15305 $33.99
Firing Pin Stop Tool K07-15304 10.99
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
70
Mec-Gar ProMag
Pistol Magazines
Mec-Gar Beretta 92 18-rd. AFC*
Mec-Gar Beretta 92 20-rd. AFC*
Mec-Gar Beretta 96 .40 15-rd. AFC*
Mec-Gar Browning HP 15-rd. Blue
Mec-Gar Browning HP 20-rd. Blue
Mec-Gar 1911 11-rd. Blue
Mec-Gar Para P-14 14-rd. Blue
Mec-Gar Para P-16 15-rd. Blue
Mec-Gar Para P-18 17-rd. Blue
Ruger P-Series 9mm 17-rd. Blue
Ruger P-Series 9mm 20-rd. Blue
Mec-Gar S&W 59 17-rd. Blue
Mec-Gar S&W 59 20-rd. Blue
Mec-Gar SIG Sauer 226 18-rd. AFC*
Mec-Gar SIG Sauer 226 .40 15-rd. AFC*
Mec-Gar SIG Sauer 228 15-rd. Blue
Springfield XD (not XDM) 9mm 18-rd.
Springfield XD (not XDM) .40 13-rd. AFC*
Mec-Gar Taurus 92-99 17-rd. Blue
Mec-Gar Taurus 92-99 20-rd. Blue
Mec-Gar CZ-75B 16-rd. Blue
Mec-Gar CZ-75B 19-rd. AFC*
K07-18728
K07-18729
K07-14992
K07-18730
K07-18731
K07-18732
K07-18733
K07-18734
K07-18735
K07-18736
K07-18737
K07-18738
K07-18739
K07-18740
K07-15020
K07-18741
K07-14988
K07-14991
K07-18742
K07-18743
K07-18727
K07-14989
$25.95
29.95
29.95
25.95
29.95
24.95
23.95
23.95
23.95
25.95
29.95
25.95
29.95
25.95
29.95
25.95
23.99
29.95
25.95
29.95
25.95
29.95
*AFC = Anti-Friction Coating
T
hese magazines are American made and feature a lifetime manufacturers-defect warranty from ProMag.
ProMag Steel 20-rd. M1A/M14
K07-12629 $19.95
ProMag Polymer 30-rd. AR-15
K07-12632
19.95
Polymer 32-rd. 9mm AR-15
K07-12638
19.95
ProMag Polymer 30-rd. Mini-14
K07-12631
19.95
ProMag Polymer 30-rd. AK-47 (7.62) K07-12669
17.95
ProMag Polymer 30-rd. AK (.223)
K07-12674
17.95
ProMag Polymer 30-rd. AK-74 (5.45) K07-12675
17.95
Kel-Tec P-32 Pistol (.32 ACP)
K07-12620
19.95
Kel-Tec P-3AT Pistol (.380 ACP)
K07-12621
19.95
Fusil USA C Products LLC AR-15 Magazines
All-Steel
30-Round
AR-15
Magazines
E
ndorsed by Matt
Burkett, the Fusil
magazine is the
only steel onepiece MIG-welded
magazine available
anywhere in the
world today and
offers incomparable strength, reliability and
endurance.
K07-18783
Was $29.95
Now $19.95
Excellent Used 20-Rd. HK 91/G-3
Aluminum Magazine
NEW
NHMTG
Hartford, CT
30-Rd.
AR-15/M16
Magazines
K07-19119
$19.95
T
hese American-made 30- and 40round magazines feature anti-tilt followers.
30-Round K07-15593 $19.95
40-Round K07-12681
24.95
Ruger
BX-25
25-Round
10/22
Magazine
UPLULA MAG LOADER
T
he UpLULA™ is
a military
quality personal universal pistol magazine
loader.
Loads virtually all
9mm,
.357 SIG,
.40 S&W,
10mm and
.45 singleand double-stack magazines.
K07-19239 $33.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
K07-11088
$9.95
K07-17915
$25.95
Bring on the Zombie Apocalypse!
71
O
r not. Either way, American
Tactical Imports’ 75 Round
AK-47 & SKS Drums hold enough
7.62 x 39 ammo to keep those
marauding targets at bay! You simply open up the door of the magazine, load 75 rounds, close the
door and wind up the spring. This
system allows you to store ammo
in the magazine. Load it, then
don’t wind it. No springs weaken
during storage.
For AK Type Rifles:
K07-14303
$89.95
For SKS Type Rifles:
K07-29828
$119.95
AK Type
SKS Type
LULA Loader
29
$
AR-15 (pictured)
AK-47/74, Galil
AR-15 9mm SMG
UZI
M1A, M-14
FN FAL
Strip LULA
95
K07-15759
K07-18455
K07-11568
K07-11569
K07-11570
K07-11571
A
rredondo Accessories’ Magazine-Cleaning Brush is ideal for that little job we
all dread (avoid?)! No excuse, Sir!
Magazine-Cleaning Brush
K07-19257 $11.95
N
ow you can load .223 Remington
ammo on stripper clips into your AR15/M16 magazines with unmatched speed –
30 rounds in 12 seconds! The Strip Lula is
the fastest, easiest to use strip loader on the
market, and it fits in your pocket!
Strip LULA
K07-11617 $29.95
CHECK-MATE
Magazines
CHECK-MATEM14/M1A
M14 Magazines
C
urrently Check-Mate Industries is the largest
M14/M1A magazine manufacturer for the
United States Military. Check-Mate Industries is recognized as being America’s number one manufacturer of M14 magazines. We offer CMI M14/M1A
magazines in 5-, 20- and 25-round capacity.
5-round M14, Phosphate Finish
K07-27055
$22.00
20-round M14, Polished-Stainless Finish
K07-27056
$28.00
20-round M14, Phosphate Finish (NSN#: 100500-628-9048 Gov’t: 7790183)
K07-27057
$27.00
25-round M14, Phosphate Finish (The same MilSpec magazines Check-Mate is now supplying to
the US Military.)
K07-27048
$35.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
72
California
Competition
Works
12 Gauge Tactical Strippers, Magazine Storage Sleeves
D.
C.
G.
F.
A.
B.
E.
C
alifornia Competition Works’ Tactical Strippers are
available in three, four or six-shell versions that
allow you quick access to your shotgun reloads or specialty ammunition. Engineered to carry up to 3” magnum* shells as well as the longer European shotshells
such as Eley and Sellier & Bellot. All are equipped with
a stainless-steel belt clip that will accommodate up to a
2-1/4” duty belt.
A. Six-Shell Tactical Stripper
K07-18606 $23.95
B. Four-Shell Tactical Stripper
K07-18605 22.95
C. Three-Shell Aluminum Stripper*
K07-19475 34.95
D. Six-Shell Covered Tactical Stripper K07-19225 33.95
E. Four-Magazine Storage Sleeve
K07-19226 14.95
F. Six-Magazine Storage Sleeve
K07-19227 17.95
G. Magazine Sleeve I.D. Tag/Hanger K07-19476
1.95
*Three-Shell Aluminum Stripper accommodates 2-3/4” shells only.
Galati
AR Case
Galati
Discreet Case
37” Black Rifle Case
42” Black Rifle Case
46” Black Rifle Case
K07-25336
K07-25344
K07-25337
$69.95
69.95
69.95
38” Black Discreet Rifle Case
42” Black Discreet Rifle Case
47” Black Discreet Rifle Case
K07-25339
K07-25360
K07-25338
$99.95
113.95
116.95
MAXPEDITION HARD-USE GEAR
B.
C.
A.
A./B. Rollypoly Folding Dump Pouch
K07-19999
25.99
(A.)Open: 6” Diameter 8” Tall (B.)Folded: 3”x 3”x 1.75”
C. Spartan Wallet, Foliage Green (folded)
K07-19993
19.99
D. Spartan Wallet, Black (open)
K07-19992
19.99
D.
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
GRSC CQB Slings, Sling Mounts and Front Swivels
73
A.
B.
C.
T
he GSRC CQB Sling was designed as a mission-specific sling for
CQB operations. It attaches only at the rear of the firearm and allows the operator to quickly transition to a handgun if necessary.
A. CQB Sling With Quick-Release Hook K07-19172
CQB Sling Without Hook (not pictured) K07-19173
B. CAR-15 Ambidextrous CQB Sling Mount with slots
K07-18968
$39.95
$24.95
D.
CAR-15 Ambidextrous CQB Sling Mount without slots (pictured
mounted on rifle above)
K07-19170
$14.95
C. A2-Style AR-15 CQB Right-Hand-Only Sling Mount
K07-19168
$34.95
D. Remington 870 Shotgun Ambidextrous CQB Sling Mount
$14.95
K07-19169
$24.95
Viking Tactics V-TAC MK1 Sling
V
iking Tactics’ V-TAC MK1 Sling is quick,
instantly adjustable to improve your shooting position,
allows shooting from weak-side shoulder, secures the carbine
during handgun transitions, and allows hands-free movement
in difficult surroundings.
Viking Tactics Sling for CAR-15
K07-11961
$34.95
Adapter for any full-stock AR
K07-11963
7.99
Viking Tactics Sling for FN-FAL/HK-91 K07-11962
40.00
MAGPUL UNFAIR ADVANTAGE
™
®
Original MagPul
For 7.62, 5.56,
and Subgun Mags
9
$ 95/3-Pack
Enhanced
Self-Leveling
AR-15/M16
Mag Follower
Enhanced Trigger
Guard, Aluminum
AR-15/M16
T
M
7.62, 3-Pk.
5.56, 3-Pk.
Subgun, 3-Pk.
K07-12603
K07-12602
K07-12604
AGPUL’s Enhanced Self Leveling Follower is a drop-in
replacement for USGI 30-round
magazines. Features a four-way
anti-tilt design.
3-Pk.
K07-12606
$6.95
he MagPul® Enhanced Trigger Guard™ is a black
anodized aluminum drop-in
replacement for the AR15/M16
weapons platform. It features a
shallow "V" shape for better use
of gloves in tactical shooting or
cold weather operations. It’s nonfolding and has rounded edges.
Aluminum Trigger Guard
K07-12611
$19.95
“Battery Assist
Device” for
AR-15/M16
D
eveloped from the experience of the MagPul®
Team, the B.A.D. Lever™ is
designed to improve the speed
and efficiency of the AR-15/M16 by enabling the shooter to
manipulate the bolt catch without moving away from the
ready position.
MagPul B.A.D. Lever
K07-27058
$29.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
74
ElZetta
$
Tactical Flashlight Holders
95
29
K07-12020
$
Noveske K9
Barricade Support
T
he K9 was developed by the Noveske
Shooting team to address the problem
with shooting off, through and around nonsturdy barricades.
K07-11624 $49.00
Jerry Miculek
AR-15 Compensator
J
erry Miculek’s three-chamber AR-15
Compensator fits threaded-barrel rifles
and may be “clocked” for left- or righthanded shooters. Used by many top threegun competitors.
K07-11328 $49.95
Emergency AR(epair) Kit
Tac Latch
T
T
Crucial Parts for Your Ar-15
he Specialized Dynamics AR-15 Emergency Repair Kit includes: three gas
rings, extractor spring, firing pin retaining
pin, buffer retaining pin/spring, hammer/
trigger pin, take down detent and spring.
K07-19460 $19.95
TTactical
RUGLO
Sights
AR15
Tritium/Fiber Optic
Front Sight
K07-18626 $69.95
KNS Precision, Inc.
P
erma-Pin Firing Pin Retainer
for M-16 and AR-15 replaces
the standard cotter pin found in
the bolt carrier to retain the firing pin (as in original Stoner
rifles). Made of tool steel. No
modification to gun required.
$7.95
he Badger Ordnance Tac Latch makes it
much easier for you to operate the latch
on your AR-15/AR-10 charging handle. It
works especially well for “flat-top” rifles
equipped with low-mounted optics.
K07-10379 $18.95
AR Brass Deflector
TC–Accessories’ AR-15/M-16 Brass Deflectors are CMP/NRA approved for service-rifle
competition. Now you can pile your spent
brass at your feet instead of wasting time
hunting it down.
Standard AR-15
K07-12541
$19.95
Flat-top
K07-12542
19.95
Removable Carry Handle
K07-12543
19.95
AccuWedge
T
K07-19927
95
39
K07-18050
The Gapper
F
rom Ergo Grip, a way to
plug that annoying gap
between pistol grip, frame
and trigger guard on your
AR.
K07-11395 $2.95
he AccuWedge fits
between the
upper and lower receiver on your AR15, removing
excess movement.
AccuWedge
K07-19122
$4.95
AR-15
Extractor
Upgrade
T
he AR-15 Extractor Upgrade
increases the tension on the
extractor, pushing it deeper into
the cartridge extractor groove.
K07-19121 $12.95
JP Enterprises, Inc. Tactical Performance Gear 75
JP Adjustable
Gas System
JPGS-2FS
JP A2 Front Sight
w/Gas Valve
JP Compensator
JPTRE-2 1/2” x 28 TPI
w/Exit Hole for .223
Matte Black Finish
K07-12614
$89.95
K07-12591
$119.95
Custom Stainless Bolt Carrier
JPFBC-3 SP Low Mass,
Stainless Finish
JPGS-2B w/Quick
Detach Rail
K07-12592
$79.95
K07-12584
$199.95
JP AR Speed Hammer
JPSH-1A Low Mass Hammer
K07-12617
$49.95
JP Reduced
Power AR
Spring Set
JP Enhanced
Reliability,
Reduced
JPFC-1 .154 Small Pin Fire Control Power AR
Kit w/CD-ROM Instructional Video Spring Set
K07-12616
$119.95
K07-12618
$9.95
K07-12590
$9.95
JP Custom Rifle Operating Spring
JPS-OSR Rifle
K07-12587
Carbine Operating Spring
JPS-OSC Carbine
K07-12594
$19.95
JP Recoil Eliminator
JPRE-2 1/2” x 28 TPI
Standard Version for AR15/M16
Matte Black Finish
K07-12615
$99.95
JP Enterprises .223 JP EnhancedBolt™ Assembly
JPEB-223 SAE3910 Construction
JP Enterprises (Competition Only) Low Mass Buffer
JPLMB
K07-12585
$19.95
$49.95
K07-12586
$109.95
POF-USA AR-15/M-16 Parts
Roller Cam Pin Upgrade
For AR-10/7.62 AR Variants
Roller Cam Pin Upgrade
Includes Gas Key
K07-25363
AR-15 Lower Parts Kit
K07-25364
$65.00
K07-25362
$45.00
$25.00
Six-Position Mil Spec Carbine Buffer Tube
K07-25365
$39.95
800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com
76
Millett Designated Marksman Tactical Scope
T
he Designated Marksman Scope fills the requirements
of the law-enforcement officer, rifle shooter, and the
big-game hunter who needs a quick sighting system at
ranges of five to 500 yards. The “Dot in a Donut” reticle
allows for fast, natural aiming. The shooter’s eye lines up
the circle at close range, and the oneMOA dot gives accuracy at the longer
ranges. Range estimation is
straight forward by use of
the circle out to
500 yards.
Compact design,
30mm tube and
bright illumination of the reticle are just a
few of the many features of the DMS-1. Bright
red illumination of the reticle adds to the quickness of the sighting system in day and low-light conditions. At one power it works well as a reflex sight and at
longer ranges the four-X magnification gives increased accuracy.
K07-19458 $249.95
Bushnell Trophy TRS-25
Ultra Compact Red Dot Sight
B
ushnell’s Trophy TRS-25 Ultra Compact Red Dot Sight is
designed for use on shotguns, handguns and rifles. It is constructed and assembled by highly skilled craftsmen to Bushnell’s
high quality standards. The precision and craftsmanship with
which this scope was built ensures its performance under
demanding conditions. This scope will provide the shooting accuracy and repeatability which have made Bushnell legendary. Features unlimited eye relief and a three-minute of angle dot.
K07-11643
$89.95
C-M O RE
SYSTEMS
The Railway
C
Tactical Sight
-More Systems sights feature a “Heads-Up Display”
for an uncluttered, limitless field of view; a totally
fogproof laminated single lens; and a positive locking
screw for windage and elevation settings.
“The Railway” 8 MOA Black
K07-16413 $249.00
Not pictured: “Railway” w/built-in spacer to co-witness
with sights on flat-top AR-15s
K07-16511 $259.00
Colt Scout Sight
“Colt Scout Sight”(Aluminum Sight Body)
“Tactical Sight” (Aluminum Sight Body)
“Tactical Sight” (Polymer Sight Body)
4 MOA Repl. Dot Module
6 MOA Repl. Dot Module
Replacement Battery
K07-16808
K07-11444
K07-11605
K07-16415
K07-16416
K07-17034
$368.00
444.00
399.95
49.00
49.00
4.00
Scout Scope Mounts for AK, SKS Rifles 77
Sorry, the optic
pictured here is NOT
included with the
Scout Scope Mount.
S
cout Scope Mounts provide an extremely stable optics base for
your AK, Saiga or SKS rifle and will not shift, vibrate loose or
change point of impact as the rifle heats up. Rock solid and easy to
install, the two-piece design enables the removal and replacement
of your optics without losing zero.
Scout Scope Mounts easily allow for complete DISASSEMBLY of
your rifle for cleaning and maintenance while retaining zero. These
rifles are designed so that carbon build-up can easily be cleaned
from the gas tube and piston. This is routine maintenance, necessary
in order to maintain a properly functioning rifle. Other mounts for
AK-and SKS-style rifles make this difficult, time consuming and then
require that optics be re-zeroed.
Scout Scope Mount for AK Rifle
K07-25374
$72.95
Scout Scope Mount for SKS Rifle
K07-25373
67.95
Evolution Gun Works Picatinny Rail Scope Mounts
39
$
Available in Standard Elevation or Plus-20 Minutes of Angle
Remington Model 700 Short Action
K07-19975
Remington Model 700 Short Action + 20 MOA
K07-19976
Remington Model 700 Long Action
K07-19977
Remington Model 700 Long Action + 20 MOA
K07-19978
Savage Short Action RB
K07-19979
Savage Short Action RB + 20 MOA
K07-19980
Savage Long Action RB
Savage Long Action RB + 20 MOA
Winchester Model 70 STD
Winchester Model 70 STD + 20 MOA
Winchester Model 70 Short Action
Winchester Model 70 Short Action + 20 MOA
Ruger 10/22
99
K07-19981
K07-19982
K07-19983
K07-19984
K07-19985
K07-19986
K07-19987
M1A / M-14 Extended M-14 Bolt Roller Greaser
Magazine Release
Tactical Sports 45° Offset Mount
A
twist of the wrist is – quite literally – all
it takes to switch from your long-range
optic to a CQB red-dot sight with Tactical
Sports’ 45-degree Offset Optics Mount! Fits
most Picatinny rails. (Pictured with Bushnell’s TRS-25, which is NOT included!)
45° Offset Optic Mount K07-14472 $14.99 ProMag XMag. Rel.
S
K07-21913
$37.50
o THAT’s how you grease that little
S.O.B. (Slick-Operating Bolt, that is.)
M-14/M1A Bolt Roller Greaser
K07-18531
$6.75
Magna-Matic Specialty Tools for Armorers
M
agna-Matic’s Carbon Removal Tools
quickly remove carbon from your rifle
with ease and precision.
CRT-15 (AR15/M16) K07-11705 $49.95
CRT-25 (AR10/SR25) K07-29025
49.95
CRT-14 (M1A/M14)
K07-29823
41.99
M
agna-Matic’s AK Front Sight
Tool is 400 percent stronger
than the competition! It’s compatible
with Bulgarian, Chinese, Egyptian,
Romanian, Polish, Russian and Yugo
AKs, and Czech VZ-58s as well.
K07-29026
$29.95
Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included
D-TERMINATOR
Electronic Scale
Lyman Powder Pal
Funnel Pan K07-18399 $5.95
$173-910.94853
K07
• 900 grain/57 gram capacity
• Accurate to 0.1 grain/0.01 gram
• Uses four AA batteries (included)
• Comes with its own AC adapter
• Scale check weight included
Scale Cover K07-18387 $14.95
(See Page 52 for additional scale check weight sets.)
(Note: Only fits current scale.)
All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase.
DILLON’S ‘ELIMINATOR’ SCALE
$$56749-1.394580
K07
79
ONESHOTONEKILL
We call it the B. A ., even though it’s the farthest thing from “liberal arts” imaginable.
However, if you use the creative side of your brain, it won’t take you long to
figure out what B. A . stands for.
MODEL 110 BA IN 338 L APUA
SAVAGEARMS.COM
PAID
Dillon Precision
PRSRT STD
U.S. Postage
Made
in
USA!
See Page 43
STUL Slide Removal Tool
The BLUE PRESS
Dillon Precision Products, Inc.
8009 E. Dillon’s Way
Scottsdale, AZ 85260-1809
Fits All Glock Models
See Page 58
Bore-tips™
Bore
Cleaning
Foam
Swabs
Scan QR Code
See Page 43
®
Bear & Son TAC II
Made
in
USA!
™
Remington Golden Saber HPJ
See Page 43
North Mountain
See Page 12
2013
Dillon Precision
Calendar
See Page 19
IDPA Compliant
Speed Loader
Holder
See Page 56
DILLON PHONE NUMBERS
Orders/Expert Assistance: 800-223-4570
For orders and technical assistance.
Order Status/Basic Orders: 800-762-3845
Order by stock numbers only
(no technical questions please);
or to quickly check the status of your order.
Catalog Request: 800-762-3844
To order The Blue Press catalog.
Dillon Showroom Hours: M-F, 9a-6p; Sat., 8a-3p